diff options
| author |   Andrew Vasquez <andrew.vasquez@qlogic.com> | 2006-10-13 09:33:39 -0700 |
|---|---|---|
| committer |   James Bottomley <jejb@mulgrave.il.steeleye.com> | 2006-10-25 15:13:08 -0700 |
| commit | df7baa506c2db1c2d12abd6f05c43f911da55a2e (patch) | |
| tree | 0914b8f01b031312246fc7ddbadb358f3bdff667 /drivers/scsi/qla2xxx/qla_os.c | |
| parent | [SCSI] qla2xxx: Workaround D3 power-management issues. (diff) | |
| download | linux-dev-df7baa506c2db1c2d12abd6f05c43f911da55a2e.tar.xz linux-dev-df7baa506c2db1c2d12abd6f05c43f911da55a2e.zip | |
[SCSI] qla2xxx: Correct QUEUE_FULL handling.
- Drop queue-depths across all luns for a given fcport
during TASK_SET_FULL statuses.
- Ramp-up I/Os after throttling.
- Consolidate completion-status handling of CS_QUEUE_FULL with
CS_COMPLETE as ISP24xx firmware no longer reports
CS_QUEUE_FULL.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to '')
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_os.c | 21 |
1 files changed, 19 insertions, 2 deletions
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 54f561d9c7a7..208607be78c7 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -77,6 +77,19 @@ MODULE_PARM_DESC(ql2xfdmienable, "Enables FDMI registratons " "Default is 0 - no FDMI. 1 - perfom FDMI."); +#define MAX_Q_DEPTH 32 +static int ql2xmaxqdepth = MAX_Q_DEPTH; +module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(ql2xmaxqdepth, + "Maximum queue depth to report for target devices."); + +int ql2xqfullrampup = 120; +module_param(ql2xqfullrampup, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(ql2xqfullrampup, + "Number of seconds to wait to begin to ramp-up the queue " + "depth for a device after a queue-full condition has been " + "detected. Default is 120 seconds."); + /* * SCSI host template entry points */ @@ -1104,9 +1117,9 @@ qla2xxx_slave_configure(struct scsi_device *sdev) struct fc_rport *rport = starget_to_rport(sdev->sdev_target); if (sdev->tagged_supported) - scsi_activate_tcq(sdev, 32); + scsi_activate_tcq(sdev, ha->max_q_depth); else - scsi_deactivate_tcq(sdev, 32); + scsi_deactivate_tcq(sdev, ha->max_q_depth); rport->dev_loss_tmo = ha->port_down_retry_count + 5; @@ -1413,6 +1426,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->link_data_rate = PORT_SPEED_UNKNOWN; ha->optrom_size = OPTROM_SIZE_2300; + ha->max_q_depth = MAX_Q_DEPTH; + if (ql2xmaxqdepth != 0 && ql2xmaxqdepth <= 0xffffU) + ha->max_q_depth = ql2xmaxqdepth; + /* Assign ISP specific operations. */ ha->isp_ops.pci_config = qla2100_pci_config; ha->isp_ops.reset_chip = qla2x00_reset_chip; |