aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2019-02-07 18:10:26 -0800
committerDavid S. Miller <davem@davemloft.net>2019-02-07 18:10:26 -0800
commita4751093a26c6bbdff86c113e7f76cf4eaf22210 (patch)
tree52407841e1077839d40b8e895fa0ef13e33e50cf /drivers
parentMerge branch 'smc-next' (diff)
parentARM: dts: clearfog: add comphy settings for Ethernet interfaces (diff)
downloadlinux-dev-a4751093a26c6bbdff86c113e7f76cf4eaf22210.tar.xz
linux-dev-a4751093a26c6bbdff86c113e7f76cf4eaf22210.zip
Merge branch 'Add-comphy-support-for-Armada-38x'
Russell King says: ==================== Add comphy support for Armada 38x This series adds support for the comphy for Armada 38x, which allows these SoCs to use 2500BASE-X mode with appropriate SFP modules. Tested on SolidRun Clearfog after updating for the 5.0 merge window changes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to '')
-rw-r--r--drivers/net/ethernet/marvell/mvneta.c45
-rw-r--r--drivers/phy/marvell/Kconfig10
-rw-r--r--drivers/phy/marvell/Makefile1
-rw-r--r--drivers/phy/marvell/phy-armada38x-comphy.c237
4 files changed, 289 insertions, 4 deletions
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 9d4568eb2297..d134d3538f9b 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -27,6 +27,7 @@
#include <linux/of_irq.h>
#include <linux/of_mdio.h>
#include <linux/of_net.h>
+#include <linux/phy/phy.h>
#include <linux/phy.h>
#include <linux/phylink.h>
#include <linux/platform_device.h>
@@ -436,6 +437,7 @@ struct mvneta_port {
struct device_node *dn;
unsigned int tx_csum_limit;
struct phylink *phylink;
+ struct phy *comphy;
struct mvneta_bm *bm_priv;
struct mvneta_bm_pool *pool_long;
@@ -3151,6 +3153,8 @@ static void mvneta_start_dev(struct mvneta_port *pp)
{
int cpu;
+ WARN_ON(phy_power_on(pp->comphy));
+
mvneta_max_rx_size_set(pp, pp->pkt_size);
mvneta_txq_max_tx_size_set(pp, pp->pkt_size);
@@ -3213,6 +3217,8 @@ static void mvneta_stop_dev(struct mvneta_port *pp)
mvneta_tx_reset(pp);
mvneta_rx_reset(pp);
+
+ WARN_ON(phy_power_off(pp->comphy));
}
static void mvneta_percpu_enable(void *arg)
@@ -3338,6 +3344,7 @@ static int mvneta_set_mac_addr(struct net_device *dev, void *addr)
static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
struct phylink_link_state *state)
{
+ struct mvneta_port *pp = netdev_priv(ndev);
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
/* We only support QSGMII, SGMII, 802.3z and RGMII modes */
@@ -3358,8 +3365,13 @@ static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
phylink_set(mask, Pause);
/* Half-duplex at speeds higher than 100Mbit is unsupported */
- phylink_set(mask, 1000baseT_Full);
- phylink_set(mask, 1000baseX_Full);
+ if (pp->comphy || state->interface != PHY_INTERFACE_MODE_2500BASEX) {
+ phylink_set(mask, 1000baseT_Full);
+ phylink_set(mask, 1000baseX_Full);
+ }
+ if (pp->comphy || state->interface == PHY_INTERFACE_MODE_2500BASEX) {
+ phylink_set(mask, 2500baseX_Full);
+ }
if (!phy_interface_mode_is_8023z(state->interface)) {
/* 10M and 100M are only supported in non-802.3z mode */
@@ -3373,6 +3385,11 @@ static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
__ETHTOOL_LINK_MODE_MASK_NBITS);
bitmap_and(state->advertising, state->advertising, mask,
__ETHTOOL_LINK_MODE_MASK_NBITS);
+
+ /* We can only operate at 2500BaseX or 1000BaseX. If requested
+ * to advertise both, only report advertising at 2500BaseX.
+ */
+ phylink_helper_basex_speed(state);
}
static int mvneta_mac_link_state(struct net_device *ndev,
@@ -3384,7 +3401,9 @@ static int mvneta_mac_link_state(struct net_device *ndev,
gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS);
if (gmac_stat & MVNETA_GMAC_SPEED_1000)
- state->speed = SPEED_1000;
+ state->speed =
+ state->interface == PHY_INTERFACE_MODE_2500BASEX ?
+ SPEED_2500 : SPEED_1000;
else if (gmac_stat & MVNETA_GMAC_SPEED_100)
state->speed = SPEED_100;
else
@@ -3499,12 +3518,20 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
MVNETA_GMAC_FORCE_LINK_DOWN);
}
+
/* When at 2.5G, the link partner can send frames with shortened
* preambles.
*/
if (state->speed == SPEED_2500)
new_ctrl4 |= MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE;
+ if (pp->comphy &&
+ (state->interface == PHY_INTERFACE_MODE_SGMII ||
+ state->interface == PHY_INTERFACE_MODE_1000BASEX ||
+ state->interface == PHY_INTERFACE_MODE_2500BASEX))
+ WARN_ON(phy_set_mode_ext(pp->comphy, PHY_MODE_ETHERNET,
+ state->interface));
+
if (new_ctrl0 != gmac_ctrl0)
mvreg_write(pp, MVNETA_GMAC_CTRL_0, new_ctrl0);
if (new_ctrl2 != gmac_ctrl2)
@@ -4404,7 +4431,7 @@ static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
if (phy_mode == PHY_INTERFACE_MODE_QSGMII)
mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO);
else if (phy_mode == PHY_INTERFACE_MODE_SGMII ||
- phy_mode == PHY_INTERFACE_MODE_1000BASEX)
+ phy_interface_mode_is_8023z(phy_mode))
mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
else if (!phy_interface_mode_is_rgmii(phy_mode))
return -EINVAL;
@@ -4421,6 +4448,7 @@ static int mvneta_probe(struct platform_device *pdev)
struct mvneta_port *pp;
struct net_device *dev;
struct phylink *phylink;
+ struct phy *comphy;
const char *dt_mac_addr;
char hw_mac_addr[ETH_ALEN];
const char *mac_from;
@@ -4446,6 +4474,14 @@ static int mvneta_probe(struct platform_device *pdev)
goto err_free_irq;
}
+ comphy = devm_of_phy_get(&pdev->dev, dn, NULL);
+ if (comphy == ERR_PTR(-EPROBE_DEFER)) {
+ err = -EPROBE_DEFER;
+ goto err_free_irq;
+ } else if (IS_ERR(comphy)) {
+ comphy = NULL;
+ }
+
phylink = phylink_create(dev, pdev->dev.fwnode, phy_mode,
&mvneta_phylink_ops);
if (IS_ERR(phylink)) {
@@ -4462,6 +4498,7 @@ static int mvneta_probe(struct platform_device *pdev)
pp = netdev_priv(dev);
spin_lock_init(&pp->lock);
pp->phylink = phylink;
+ pp->comphy = comphy;
pp->phy_interface = phy_mode;
pp->dn = dn;
diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
index 6fb4b56e4c14..224ea4e6a46d 100644
--- a/drivers/phy/marvell/Kconfig
+++ b/drivers/phy/marvell/Kconfig
@@ -21,6 +21,16 @@ config PHY_BERLIN_USB
help
Enable this to support the USB PHY on Marvell Berlin SoCs.
+config PHY_MVEBU_A38X_COMPHY
+ tristate "Marvell Armada 38x comphy driver"
+ depends on ARCH_MVEBU || COMPILE_TEST
+ depends on OF
+ select GENERIC_PHY
+ help
+ This driver allows to control the comphy, an hardware block providing
+ shared serdes PHYs on Marvell Armada 38x. Its serdes lanes can be
+ used by various controllers (Ethernet, sata, usb, PCIe...).
+
config PHY_MVEBU_CP110_COMPHY
tristate "Marvell CP110 comphy driver"
depends on ARCH_MVEBU || COMPILE_TEST
diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile
index 3975b144f8ec..59b6c03ef756 100644
--- a/drivers/phy/marvell/Makefile
+++ b/drivers/phy/marvell/Makefile
@@ -2,6 +2,7 @@
obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
+obj-$(CONFIG_PHY_MVEBU_A38X_COMPHY) += phy-armada38x-comphy.o
obj-$(CONFIG_PHY_MVEBU_CP110_COMPHY) += phy-mvebu-cp110-comphy.o
obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
diff --git a/drivers/phy/marvell/phy-armada38x-comphy.c b/drivers/phy/marvell/phy-armada38x-comphy.c
new file mode 100644
index 000000000000..3e00bc679d4e
--- /dev/null
+++ b/drivers/phy/marvell/phy-armada38x-comphy.c
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Russell King, Deep Blue Solutions Ltd.
+ *
+ * Partly derived from CP110 comphy driver by Antoine Tenart
+ * <antoine.tenart@bootlin.com>
+ */
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+
+#define MAX_A38X_COMPHY 6
+#define MAX_A38X_PORTS 3
+
+#define COMPHY_CFG1 0x00
+#define COMPHY_CFG1_GEN_TX(x) ((x) << 26)
+#define COMPHY_CFG1_GEN_TX_MSK COMPHY_CFG1_GEN_TX(15)
+#define COMPHY_CFG1_GEN_RX(x) ((x) << 22)
+#define COMPHY_CFG1_GEN_RX_MSK COMPHY_CFG1_GEN_RX(15)
+#define GEN_SGMII_1_25GBPS 6
+#define GEN_SGMII_3_125GBPS 8
+
+#define COMPHY_STAT1 0x18
+#define COMPHY_STAT1_PLL_RDY_TX BIT(3)
+#define COMPHY_STAT1_PLL_RDY_RX BIT(2)
+
+#define COMPHY_SELECTOR 0xfc
+
+struct a38x_comphy;
+
+struct a38x_comphy_lane {
+ void __iomem *base;
+ struct a38x_comphy *priv;
+ unsigned int n;
+
+ int port;
+};
+
+struct a38x_comphy {
+ void __iomem *base;
+ struct device *dev;
+ struct a38x_comphy_lane lane[MAX_A38X_COMPHY];
+};
+
+static const u8 gbe_mux[MAX_A38X_COMPHY][MAX_A38X_PORTS] = {
+ { 0, 0, 0 },
+ { 4, 5, 0 },
+ { 0, 4, 0 },
+ { 0, 0, 4 },
+ { 0, 3, 0 },
+ { 0, 0, 3 },
+};
+
+static void a38x_comphy_set_reg(struct a38x_comphy_lane *lane,
+ unsigned int offset, u32 mask, u32 value)
+{
+ u32 val;
+
+ val = readl_relaxed(lane->base + offset) & ~mask;
+ writel(val | value, lane->base + offset);
+}
+
+static void a38x_comphy_set_speed(struct a38x_comphy_lane *lane,
+ unsigned int gen_tx, unsigned int gen_rx)
+{
+ a38x_comphy_set_reg(lane, COMPHY_CFG1,
+ COMPHY_CFG1_GEN_TX_MSK | COMPHY_CFG1_GEN_RX_MSK,
+ COMPHY_CFG1_GEN_TX(gen_tx) |
+ COMPHY_CFG1_GEN_RX(gen_rx));
+}
+
+static int a38x_comphy_poll(struct a38x_comphy_lane *lane,
+ unsigned int offset, u32 mask, u32 value)
+{
+ u32 val;
+ int ret;
+
+ ret = readl_relaxed_poll_timeout_atomic(lane->base + offset, val,
+ (val & mask) == value,
+ 1000, 150000);
+
+ if (ret)
+ dev_err(lane->priv->dev,
+ "comphy%u: timed out waiting for status\n", lane->n);
+
+ return ret;
+}
+
+/*
+ * We only support changing the speed for comphys configured for GBE.
+ * Since that is all we do, we only poll for PLL ready status.
+ */
+static int a38x_comphy_set_mode(struct phy *phy, enum phy_mode mode, int sub)
+{
+ struct a38x_comphy_lane *lane = phy_get_drvdata(phy);
+ unsigned int gen;
+
+ if (mode != PHY_MODE_ETHERNET)
+ return -EINVAL;
+
+ switch (sub) {
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_1000BASEX:
+ gen = GEN_SGMII_1_25GBPS;
+ break;
+
+ case PHY_INTERFACE_MODE_2500BASEX:
+ gen = GEN_SGMII_3_125GBPS;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ a38x_comphy_set_speed(lane, gen, gen);
+
+ return a38x_comphy_poll(lane, COMPHY_STAT1,
+ COMPHY_STAT1_PLL_RDY_TX |
+ COMPHY_STAT1_PLL_RDY_RX,
+ COMPHY_STAT1_PLL_RDY_TX |
+ COMPHY_STAT1_PLL_RDY_RX);
+}
+
+static const struct phy_ops a38x_comphy_ops = {
+ .set_mode = a38x_comphy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *a38x_comphy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct a38x_comphy_lane *lane;
+ struct phy *phy;
+ u32 val;
+
+ if (WARN_ON(args->args[0] >= MAX_A38X_PORTS))
+ return ERR_PTR(-EINVAL);
+
+ phy = of_phy_simple_xlate(dev, args);
+ if (IS_ERR(phy))
+ return phy;
+
+ lane = phy_get_drvdata(phy);
+ if (lane->port >= 0)
+ return ERR_PTR(-EBUSY);
+
+ lane->port = args->args[0];
+
+ val = readl_relaxed(lane->priv->base + COMPHY_SELECTOR);
+ val = (val >> (4 * lane->n)) & 0xf;
+
+ if (!gbe_mux[lane->n][lane->port] ||
+ val != gbe_mux[lane->n][lane->port]) {
+ dev_warn(lane->priv->dev,
+ "comphy%u: not configured for GBE\n", lane->n);
+ phy = ERR_PTR(-EINVAL);
+ }
+
+ return phy;
+}
+
+static int a38x_comphy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *provider;
+ struct device_node *child;
+ struct a38x_comphy *priv;
+ struct resource *res;
+ void __iomem *base;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ priv->dev = &pdev->dev;
+ priv->base = base;
+
+ for_each_available_child_of_node(pdev->dev.of_node, child) {
+ struct phy *phy;
+ int ret;
+ u32 val;
+
+ ret = of_property_read_u32(child, "reg", &val);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "missing 'reg' property (%d)\n",
+ ret);
+ continue;
+ }
+
+ if (val >= MAX_A38X_COMPHY || priv->lane[val].base) {
+ dev_err(&pdev->dev, "invalid 'reg' property\n");
+ continue;
+ }
+
+ phy = devm_phy_create(&pdev->dev, child, &a38x_comphy_ops);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ priv->lane[val].base = base + 0x28 * val;
+ priv->lane[val].priv = priv;
+ priv->lane[val].n = val;
+ priv->lane[val].port = -1;
+ phy_set_drvdata(phy, &priv->lane[val]);
+ }
+
+ dev_set_drvdata(&pdev->dev, priv);
+
+ provider = devm_of_phy_provider_register(&pdev->dev, a38x_comphy_xlate);
+
+ return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct of_device_id a38x_comphy_of_match_table[] = {
+ { .compatible = "marvell,armada-380-comphy" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, a38x_comphy_of_match_table);
+
+static struct platform_driver a38x_comphy_driver = {
+ .probe = a38x_comphy_probe,
+ .driver = {
+ .name = "armada-38x-comphy",
+ .of_match_table = a38x_comphy_of_match_table,
+ },
+};
+module_platform_driver(a38x_comphy_driver);
+
+MODULE_AUTHOR("Russell King <rmk+kernel@armlinux.org.uk>");
+MODULE_DESCRIPTION("Common PHY driver for Armada 38x SoCs");
+MODULE_LICENSE("GPL v2");