aboutsummaryrefslogtreecommitdiffstats
path: root/fs/ext3/super.c
diff options
context:
space:
mode:
authorJan Kara <jack@suse.cz>2015-06-18 16:52:29 +0200
committerJan Kara <jack@suse.com>2015-07-23 20:59:40 +0200
commitc290ea01abb7907fde602f3ba55905ef10a37477 (patch)
tree67b3f47105259178034ef42d096bb5accd9407a3 /fs/ext3/super.c
parentdoc: Update doc about journalling layer (diff)
downloadlinux-dev-c290ea01abb7907fde602f3ba55905ef10a37477.tar.xz
linux-dev-c290ea01abb7907fde602f3ba55905ef10a37477.zip
fs: Remove ext3 filesystem driver
The functionality of ext3 is fully supported by ext4 driver. Major distributions (SUSE, RedHat) already use ext4 driver to handle ext3 filesystems for quite some time. There is some ugliness in mm resulting from jbd cleaning buffers in a dirty page without cleaning page dirty bit and also support for buffer bouncing in the block layer when stable pages are required is there only because of jbd. So let's remove the ext3 driver. This saves us some 28k lines of duplicated code. Acked-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz>
Diffstat (limited to '')
-rw-r--r--fs/ext3/super.c3165
1 files changed, 0 insertions, 3165 deletions
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
deleted file mode 100644
index 5ed0044fbb37..000000000000
--- a/fs/ext3/super.c
+++ /dev/null
@@ -1,3165 +0,0 @@
-/*
- * linux/fs/ext3/super.c
- *
- * Copyright (C) 1992, 1993, 1994, 1995
- * Remy Card (card@masi.ibp.fr)
- * Laboratoire MASI - Institut Blaise Pascal
- * Universite Pierre et Marie Curie (Paris VI)
- *
- * from
- *
- * linux/fs/minix/inode.c
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- *
- * Big-endian to little-endian byte-swapping/bitmaps by
- * David S. Miller (davem@caip.rutgers.edu), 1995
- */
-
-#include <linux/module.h>
-#include <linux/blkdev.h>
-#include <linux/parser.h>
-#include <linux/exportfs.h>
-#include <linux/statfs.h>
-#include <linux/random.h>
-#include <linux/mount.h>
-#include <linux/quotaops.h>
-#include <linux/seq_file.h>
-#include <linux/log2.h>
-#include <linux/cleancache.h>
-#include <linux/namei.h>
-
-#include <asm/uaccess.h>
-
-#define CREATE_TRACE_POINTS
-
-#include "ext3.h"
-#include "xattr.h"
-#include "acl.h"
-#include "namei.h"
-
-#ifdef CONFIG_EXT3_DEFAULTS_TO_ORDERED
- #define EXT3_MOUNT_DEFAULT_DATA_MODE EXT3_MOUNT_ORDERED_DATA
-#else
- #define EXT3_MOUNT_DEFAULT_DATA_MODE EXT3_MOUNT_WRITEBACK_DATA
-#endif
-
-static int ext3_load_journal(struct super_block *, struct ext3_super_block *,
- unsigned long journal_devnum);
-static int ext3_create_journal(struct super_block *, struct ext3_super_block *,
- unsigned int);
-static int ext3_commit_super(struct super_block *sb,
- struct ext3_super_block *es,
- int sync);
-static void ext3_mark_recovery_complete(struct super_block * sb,
- struct ext3_super_block * es);
-static void ext3_clear_journal_err(struct super_block * sb,
- struct ext3_super_block * es);
-static int ext3_sync_fs(struct super_block *sb, int wait);
-static const char *ext3_decode_error(struct super_block * sb, int errno,
- char nbuf[16]);
-static int ext3_remount (struct super_block * sb, int * flags, char * data);
-static int ext3_statfs (struct dentry * dentry, struct kstatfs * buf);
-static int ext3_unfreeze(struct super_block *sb);
-static int ext3_freeze(struct super_block *sb);
-
-/*
- * Wrappers for journal_start/end.
- */
-handle_t *ext3_journal_start_sb(struct super_block *sb, int nblocks)
-{
- journal_t *journal;
-
- if (sb->s_flags & MS_RDONLY)
- return ERR_PTR(-EROFS);
-
- /* Special case here: if the journal has aborted behind our
- * backs (eg. EIO in the commit thread), then we still need to
- * take the FS itself readonly cleanly. */
- journal = EXT3_SB(sb)->s_journal;
- if (is_journal_aborted(journal)) {
- ext3_abort(sb, __func__,
- "Detected aborted journal");
- return ERR_PTR(-EROFS);
- }
-
- return journal_start(journal, nblocks);
-}
-
-int __ext3_journal_stop(const char *where, handle_t *handle)
-{
- struct super_block *sb;
- int err;
- int rc;
-
- sb = handle->h_transaction->t_journal->j_private;
- err = handle->h_err;
- rc = journal_stop(handle);
-
- if (!err)
- err = rc;
- if (err)
- __ext3_std_error(sb, where, err);
- return err;
-}
-
-void ext3_journal_abort_handle(const char *caller, const char *err_fn,
- struct buffer_head *bh, handle_t *handle, int err)
-{
- char nbuf[16];
- const char *errstr = ext3_decode_error(NULL, err, nbuf);
-
- if (bh)
- BUFFER_TRACE(bh, "abort");
-
- if (!handle->h_err)
- handle->h_err = err;
-
- if (is_handle_aborted(handle))
- return;
-
- printk(KERN_ERR "EXT3-fs: %s: aborting transaction: %s in %s\n",
- caller, errstr, err_fn);
-
- journal_abort_handle(handle);
-}
-
-void ext3_msg(struct super_block *sb, const char *prefix,
- const char *fmt, ...)
-{
- struct va_format vaf;
- va_list args;
-
- va_start(args, fmt);
-
- vaf.fmt = fmt;
- vaf.va = &args;
-
- printk("%sEXT3-fs (%s): %pV\n", prefix, sb->s_id, &vaf);
-
- va_end(args);
-}
-
-/* Deal with the reporting of failure conditions on a filesystem such as
- * inconsistencies detected or read IO failures.
- *
- * On ext2, we can store the error state of the filesystem in the
- * superblock. That is not possible on ext3, because we may have other
- * write ordering constraints on the superblock which prevent us from
- * writing it out straight away; and given that the journal is about to
- * be aborted, we can't rely on the current, or future, transactions to
- * write out the superblock safely.
- *
- * We'll just use the journal_abort() error code to record an error in
- * the journal instead. On recovery, the journal will complain about
- * that error until we've noted it down and cleared it.
- */
-
-static void ext3_handle_error(struct super_block *sb)
-{
- struct ext3_super_block *es = EXT3_SB(sb)->s_es;
-
- EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS;
- es->s_state |= cpu_to_le16(EXT3_ERROR_FS);
-
- if (sb->s_flags & MS_RDONLY)
- return;
-
- if (!test_opt (sb, ERRORS_CONT)) {
- journal_t *journal = EXT3_SB(sb)->s_journal;
-
- set_opt(EXT3_SB(sb)->s_mount_opt, ABORT);
- if (journal)
- journal_abort(journal, -EIO);
- }
- if (test_opt (sb, ERRORS_RO)) {
- ext3_msg(sb, KERN_CRIT,
- "error: remounting filesystem read-only");
- /*
- * Make sure updated value of ->s_mount_state will be visible
- * before ->s_flags update.
- */
- smp_wmb();
- sb->s_flags |= MS_RDONLY;
- }
- ext3_commit_super(sb, es, 1);
- if (test_opt(sb, ERRORS_PANIC))
- panic("EXT3-fs (%s): panic forced after error\n",
- sb->s_id);
-}
-
-void ext3_error(struct super_block *sb, const char *function,
- const char *fmt, ...)
-{
- struct va_format vaf;
- va_list args;
-
- va_start(args, fmt);
-
- vaf.fmt = fmt;
- vaf.va = &args;
-
- printk(KERN_CRIT "EXT3-fs error (device %s): %s: %pV\n",
- sb->s_id, function, &vaf);
-
- va_end(args);
-
- ext3_handle_error(sb);
-}
-
-static const char *ext3_decode_error(struct super_block * sb, int errno,
- char nbuf[16])
-{
- char *errstr = NULL;
-
- switch (errno) {
- case -EIO:
- errstr = "IO failure";
- break;
- case -ENOMEM:
- errstr = "Out of memory";
- break;
- case -EROFS:
- if (!sb || EXT3_SB(sb)->s_journal->j_flags & JFS_ABORT)
- errstr = "Journal has aborted";
- else
- errstr = "Readonly filesystem";
- break;
- default:
- /* If the caller passed in an extra buffer for unknown
- * errors, textualise them now. Else we just return
- * NULL. */
- if (nbuf) {
- /* Check for truncated error codes... */
- if (snprintf(nbuf, 16, "error %d", -errno) >= 0)
- errstr = nbuf;
- }
- break;
- }
-
- return errstr;
-}
-
-/* __ext3_std_error decodes expected errors from journaling functions
- * automatically and invokes the appropriate error response. */
-
-void __ext3_std_error (struct super_block * sb, const char * function,
- int errno)
-{
- char nbuf[16];
- const char *errstr;
-
- /* Special case: if the error is EROFS, and we're not already
- * inside a transaction, then there's really no point in logging
- * an error. */
- if (errno == -EROFS && journal_current_handle() == NULL &&
- (sb->s_flags & MS_RDONLY))
- return;
-
- errstr = ext3_decode_error(sb, errno, nbuf);
- ext3_msg(sb, KERN_CRIT, "error in %s: %s", function, errstr);
-
- ext3_handle_error(sb);
-}
-
-/*
- * ext3_abort is a much stronger failure handler than ext3_error. The
- * abort function may be used to deal with unrecoverable failures such
- * as journal IO errors or ENOMEM at a critical moment in log management.
- *
- * We unconditionally force the filesystem into an ABORT|READONLY state,
- * unless the error response on the fs has been set to panic in which
- * case we take the easy way out and panic immediately.
- */
-
-void ext3_abort(struct super_block *sb, const char *function,
- const char *fmt, ...)
-{
- struct va_format vaf;
- va_list args;
-
- va_start(args, fmt);
-
- vaf.fmt = fmt;
- vaf.va = &args;
-
- printk(KERN_CRIT "EXT3-fs (%s): error: %s: %pV\n",
- sb->s_id, function, &vaf);
-
- va_end(args);
-
- if (test_opt(sb, ERRORS_PANIC))
- panic("EXT3-fs: panic from previous error\n");
-
- if (sb->s_flags & MS_RDONLY)
- return;
-
- ext3_msg(sb, KERN_CRIT,
- "error: remounting filesystem read-only");
- EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS;
- set_opt(EXT3_SB(sb)->s_mount_opt, ABORT);
- /*
- * Make sure updated value of ->s_mount_state will be visible
- * before ->s_flags update.
- */
- smp_wmb();
- sb->s_flags |= MS_RDONLY;
-
- if (EXT3_SB(sb)->s_journal)
- journal_abort(EXT3_SB(sb)->s_journal, -EIO);
-}
-
-void ext3_warning(struct super_block *sb, const char *function,
- const char *fmt, ...)
-{
- struct va_format vaf;
- va_list args;
-
- va_start(args, fmt);
-
- vaf.fmt = fmt;
- vaf.va = &args;
-
- printk(KERN_WARNING "EXT3-fs (%s): warning: %s: %pV\n",
- sb->s_id, function, &vaf);
-
- va_end(args);
-}
-
-void ext3_update_dynamic_rev(struct super_block *sb)
-{
- struct ext3_super_block *es = EXT3_SB(sb)->s_es;
-
- if (le32_to_cpu(es->s_rev_level) > EXT3_GOOD_OLD_REV)
- return;
-
- ext3_msg(sb, KERN_WARNING,
- "warning: updating to rev %d because of "
- "new feature flag, running e2fsck is recommended",
- EXT3_DYNAMIC_REV);
-
- es->s_first_ino = cpu_to_le32(EXT3_GOOD_OLD_FIRST_INO);
- es->s_inode_size = cpu_to_le16(EXT3_GOOD_OLD_INODE_SIZE);
- es->s_rev_level = cpu_to_le32(EXT3_DYNAMIC_REV);
- /* leave es->s_feature_*compat flags alone */
- /* es->s_uuid will be set by e2fsck if empty */
-
- /*
- * The rest of the superblock fields should be zero, and if not it
- * means they are likely already in use, so leave them alone. We
- * can leave it up to e2fsck to clean up any inconsistencies there.
- */
-}
-
-/*
- * Open the external journal device
- */
-static struct block_device *ext3_blkdev_get(dev_t dev, struct super_block *sb)
-{
- struct block_device *bdev;
- char b[BDEVNAME_SIZE];
-
- bdev = blkdev_get_by_dev(dev, FMODE_READ|FMODE_WRITE|FMODE_EXCL, sb);
- if (IS_ERR(bdev))
- goto fail;
- return bdev;
-
-fail:
- ext3_msg(sb, KERN_ERR, "error: failed to open journal device %s: %ld",
- __bdevname(dev, b), PTR_ERR(bdev));
-
- return NULL;
-}
-
-/*
- * Release the journal device
- */
-static void ext3_blkdev_put(struct block_device *bdev)
-{
- blkdev_put(bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
-}
-
-static void ext3_blkdev_remove(struct ext3_sb_info *sbi)
-{
- struct block_device *bdev;
- bdev = sbi->journal_bdev;
- if (bdev) {
- ext3_blkdev_put(bdev);
- sbi->journal_bdev = NULL;
- }
-}
-
-static inline struct inode *orphan_list_entry(struct list_head *l)
-{
- return &list_entry(l, struct ext3_inode_info, i_orphan)->vfs_inode;
-}
-
-static void dump_orphan_list(struct super_block *sb, struct ext3_sb_info *sbi)
-{
- struct list_head *l;
-
- ext3_msg(sb, KERN_ERR, "error: sb orphan head is %d",
- le32_to_cpu(sbi->s_es->s_last_orphan));
-
- ext3_msg(sb, KERN_ERR, "sb_info orphan list:");
- list_for_each(l, &sbi->s_orphan) {
- struct inode *inode = orphan_list_entry(l);
- ext3_msg(sb, KERN_ERR, " "
- "inode %s:%lu at %p: mode %o, nlink %d, next %d\n",
- inode->i_sb->s_id, inode->i_ino, inode,
- inode->i_mode, inode->i_nlink,
- NEXT_ORPHAN(inode));
- }
-}
-
-static void ext3_put_super (struct super_block * sb)
-{
- struct ext3_sb_info *sbi = EXT3_SB(sb);
- struct ext3_super_block *es = sbi->s_es;
- int i, err;
-
- dquot_disable(sb, -1, DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED);
- ext3_xattr_put_super(sb);
- err = journal_destroy(sbi->s_journal);
- sbi->s_journal = NULL;
- if (err < 0)
- ext3_abort(sb, __func__, "Couldn't clean up the journal");
-
- if (!(sb->s_flags & MS_RDONLY)) {
- EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
- es->s_state = cpu_to_le16(sbi->s_mount_state);
- BUFFER_TRACE(sbi->s_sbh, "marking dirty");
- mark_buffer_dirty(sbi->s_sbh);
- ext3_commit_super(sb, es, 1);
- }
-
- for (i = 0; i < sbi->s_gdb_count; i++)
- brelse(sbi->s_group_desc[i]);
- kfree(sbi->s_group_desc);
- percpu_counter_destroy(&sbi->s_freeblocks_counter);
- percpu_counter_destroy(&sbi->s_freeinodes_counter);
- percpu_counter_destroy(&sbi->s_dirs_counter);
- brelse(sbi->s_sbh);
-#ifdef CONFIG_QUOTA
- for (i = 0; i < EXT3_MAXQUOTAS; i++)
- kfree(sbi->s_qf_names[i]);
-#endif
-
- /* Debugging code just in case the in-memory inode orphan list
- * isn't empty. The on-disk one can be non-empty if we've
- * detected an error and taken the fs readonly, but the
- * in-memory list had better be clean by this point. */
- if (!list_empty(&sbi->s_orphan))
- dump_orphan_list(sb, sbi);
- J_ASSERT(list_empty(&sbi->s_orphan));
-
- invalidate_bdev(sb->s_bdev);
- if (sbi->journal_bdev && sbi->journal_bdev != sb->s_bdev) {
- /*
- * Invalidate the journal device's buffers. We don't want them
- * floating about in memory - the physical journal device may
- * hotswapped, and it breaks the `ro-after' testing code.
- */
- sync_blockdev(sbi->journal_bdev);
- invalidate_bdev(sbi->journal_bdev);
- ext3_blkdev_remove(sbi);
- }
- sb->s_fs_info = NULL;
- kfree(sbi->s_blockgroup_lock);
- mutex_destroy(&sbi->s_orphan_lock);
- mutex_destroy(&sbi->s_resize_lock);
- kfree(sbi);
-}
-
-static struct kmem_cache *ext3_inode_cachep;
-
-/*
- * Called inside transaction, so use GFP_NOFS
- */
-static struct inode *ext3_alloc_inode(struct super_block *sb)
-{
- struct ext3_inode_info *ei;
-
- ei = kmem_cache_alloc(ext3_inode_cachep, GFP_NOFS);
- if (!ei)
- return NULL;
- ei->i_block_alloc_info = NULL;
- ei->vfs_inode.i_version = 1;
- atomic_set(&ei->i_datasync_tid, 0);
- atomic_set(&ei->i_sync_tid, 0);
-#ifdef CONFIG_QUOTA
- memset(&ei->i_dquot, 0, sizeof(ei->i_dquot));
-#endif
-
- return &ei->vfs_inode;
-}
-
-static int ext3_drop_inode(struct inode *inode)
-{
- int drop = generic_drop_inode(inode);
-
- trace_ext3_drop_inode(inode, drop);
- return drop;
-}
-
-static void ext3_i_callback(struct rcu_head *head)
-{
- struct inode *inode = container_of(head, struct inode, i_rcu);
- kmem_cache_free(ext3_inode_cachep, EXT3_I(inode));
-}
-
-static void ext3_destroy_inode(struct inode *inode)
-{
- if (!list_empty(&(EXT3_I(inode)->i_orphan))) {
- printk("EXT3 Inode %p: orphan list check failed!\n",
- EXT3_I(inode));
- print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 16, 4,
- EXT3_I(inode), sizeof(struct ext3_inode_info),
- false);
- dump_stack();
- }
- call_rcu(&inode->i_rcu, ext3_i_callback);
-}
-
-static void init_once(void *foo)
-{
- struct ext3_inode_info *ei = (struct ext3_inode_info *) foo;
-
- INIT_LIST_HEAD(&ei->i_orphan);
-#ifdef CONFIG_EXT3_FS_XATTR
- init_rwsem(&ei->xattr_sem);
-#endif
- mutex_init(&ei->truncate_mutex);
- inode_init_once(&ei->vfs_inode);
-}
-
-static int __init init_inodecache(void)
-{
- ext3_inode_cachep = kmem_cache_create("ext3_inode_cache",
- sizeof(struct ext3_inode_info),
- 0, (SLAB_RECLAIM_ACCOUNT|
- SLAB_MEM_SPREAD),
- init_once);
- if (ext3_inode_cachep == NULL)
- return -ENOMEM;
- return 0;
-}
-
-static void destroy_inodecache(void)
-{
- /*
- * Make sure all delayed rcu free inodes are flushed before we
- * destroy cache.
- */
- rcu_barrier();
- kmem_cache_destroy(ext3_inode_cachep);
-}
-
-static inline void ext3_show_quota_options(struct seq_file *seq, struct super_block *sb)
-{
-#if defined(CONFIG_QUOTA)
- struct ext3_sb_info *sbi = EXT3_SB(sb);
-
- if (sbi->s_jquota_fmt) {
- char *fmtname = "";
-
- switch (sbi->s_jquota_fmt) {
- case QFMT_VFS_OLD:
- fmtname = "vfsold";
- break;
- case QFMT_VFS_V0:
- fmtname = "vfsv0";
- break;
- case QFMT_VFS_V1:
- fmtname = "vfsv1";
- break;
- }
- seq_printf(seq, ",jqfmt=%s", fmtname);
- }
-
- if (sbi->s_qf_names[USRQUOTA])
- seq_printf(seq, ",usrjquota=%s", sbi->s_qf_names[USRQUOTA]);
-
- if (sbi->s_qf_names[GRPQUOTA])
- seq_printf(seq, ",grpjquota=%s", sbi->s_qf_names[GRPQUOTA]);
-
- if (test_opt(sb, USRQUOTA))
- seq_puts(seq, ",usrquota");
-
- if (test_opt(sb, GRPQUOTA))
- seq_puts(seq, ",grpquota");
-#endif
-}
-
-static char *data_mode_string(unsigned long mode)
-{
- switch (mode) {
- case EXT3_MOUNT_JOURNAL_DATA:
- return "journal";
- case EXT3_MOUNT_ORDERED_DATA:
- return "ordered";
- case EXT3_MOUNT_WRITEBACK_DATA:
- return "writeback";
- }
- return "unknown";
-}
-
-/*
- * Show an option if
- * - it's set to a non-default value OR
- * - if the per-sb default is different from the global default
- */
-static int ext3_show_options(struct seq_file *seq, struct dentry *root)
-{
- struct super_block *sb = root->d_sb;
- struct ext3_sb_info *sbi = EXT3_SB(sb);
- struct ext3_super_block *es = sbi->s_es;
- unsigned long def_mount_opts;
-
- def_mount_opts = le32_to_cpu(es->s_default_mount_opts);
-
- if (sbi->s_sb_block != 1)
- seq_printf(seq, ",sb=%lu", sbi->s_sb_block);
- if (test_opt(sb, MINIX_DF))
- seq_puts(seq, ",minixdf");
- if (test_opt(sb, GRPID))
- seq_puts(seq, ",grpid");
- if (!test_opt(sb, GRPID) && (def_mount_opts & EXT3_DEFM_BSDGROUPS))
- seq_puts(seq, ",nogrpid");
- if (!uid_eq(sbi->s_resuid, make_kuid(&init_user_ns, EXT3_DEF_RESUID)) ||
- le16_to_cpu(es->s_def_resuid) != EXT3_DEF_RESUID) {
- seq_printf(seq, ",resuid=%u",
- from_kuid_munged(&init_user_ns, sbi->s_resuid));
- }
- if (!gid_eq(sbi->s_resgid, make_kgid(&init_user_ns, EXT3_DEF_RESGID)) ||
- le16_to_cpu(es->s_def_resgid) != EXT3_DEF_RESGID) {
- seq_printf(seq, ",resgid=%u",
- from_kgid_munged(&init_user_ns, sbi->s_resgid));
- }
- if (test_opt(sb, ERRORS_RO)) {
- int def_errors = le16_to_cpu(es->s_errors);
-
- if (def_errors == EXT3_ERRORS_PANIC ||
- def_errors == EXT3_ERRORS_CONTINUE) {
- seq_puts(seq, ",errors=remount-ro");
- }
- }
- if (test_opt(sb, ERRORS_CONT))
- seq_puts(seq, ",errors=continue");
- if (test_opt(sb, ERRORS_PANIC))
- seq_puts(seq, ",errors=panic");
- if (test_opt(sb, NO_UID32))
- seq_puts(seq, ",nouid32");
- if (test_opt(sb, DEBUG))
- seq_puts(seq, ",debug");
-#ifdef CONFIG_EXT3_FS_XATTR
- if (test_opt(sb, XATTR_USER))
- seq_puts(seq, ",user_xattr");
- if (!test_opt(sb, XATTR_USER) &&
- (def_mount_opts & EXT3_DEFM_XATTR_USER)) {
- seq_puts(seq, ",nouser_xattr");
- }
-#endif
-#ifdef CONFIG_EXT3_FS_POSIX_ACL
- if (test_opt(sb, POSIX_ACL))
- seq_puts(seq, ",acl");
- if (!test_opt(sb, POSIX_ACL) && (def_mount_opts & EXT3_DEFM_ACL))
- seq_puts(seq, ",noacl");
-#endif
- if (!test_opt(sb, RESERVATION))
- seq_puts(seq, ",noreservation");
- if (sbi->s_commit_interval) {
- seq_printf(seq, ",commit=%u",
- (unsigned) (sbi->s_commit_interval / HZ));
- }
-
- /*
- * Always display barrier state so it's clear what the status is.
- */
- seq_puts(seq, ",barrier=");
- seq_puts(seq, test_opt(sb, BARRIER) ? "1" : "0");
- seq_printf(seq, ",data=%s", data_mode_string(test_opt(sb, DATA_FLAGS)));
- if (test_opt(sb, DATA_ERR_ABORT))
- seq_puts(seq, ",data_err=abort");
-
- if (test_opt(sb, NOLOAD))
- seq_puts(seq, ",norecovery");
-
- ext3_show_quota_options(seq, sb);
-
- return 0;
-}
-
-
-static struct inode *ext3_nfs_get_inode(struct super_block *sb,
- u64 ino, u32 generation)
-{
- struct inode *inode;
-
- if (ino < EXT3_FIRST_INO(sb) && ino != EXT3_ROOT_INO)
- return ERR_PTR(-ESTALE);
- if (ino > le32_to_cpu(EXT3_SB(sb)->s_es->s_inodes_count))
- return ERR_PTR(-ESTALE);
-
- /* iget isn't really right if the inode is currently unallocated!!
- *
- * ext3_read_inode will return a bad_inode if the inode had been
- * deleted, so we should be safe.
- *
- * Currently we don't know the generation for parent directory, so
- * a generation of 0 means "accept any"
- */
- inode = ext3_iget(sb, ino);
- if (IS_ERR(inode))
- return ERR_CAST(inode);
- if (generation && inode->i_generation != generation) {
- iput(inode);
- return ERR_PTR(-ESTALE);
- }
-
- return inode;
-}
-
-static struct dentry *ext3_fh_to_dentry(struct super_block *sb, struct fid *fid,
- int fh_len, int fh_type)
-{
- return generic_fh_to_dentry(sb, fid, fh_len, fh_type,
- ext3_nfs_get_inode);
-}
-
-static struct dentry *ext3_fh_to_parent(struct super_block *sb, struct fid *fid,
- int fh_len, int fh_type)
-{
- return generic_fh_to_parent(sb, fid, fh_len, fh_type,
- ext3_nfs_get_inode);
-}
-
-/*
- * Try to release metadata pages (indirect blocks, directories) which are
- * mapped via the block device. Since these pages could have journal heads
- * which would prevent try_to_free_buffers() from freeing them, we must use
- * jbd layer's try_to_free_buffers() function to release them.
- */
-static int bdev_try_to_free_page(struct super_block *sb, struct page *page,
- gfp_t wait)
-{
- journal_t *journal = EXT3_SB(sb)->s_journal;
-
- WARN_ON(PageChecked(page));
- if (!page_has_buffers(page))
- return 0;
- if (journal)
- return journal_try_to_free_buffers(journal, page,
- wait & ~__GFP_WAIT);
- return try_to_free_buffers(page);
-}
-
-#ifdef CONFIG_QUOTA
-#define QTYPE2NAME(t) ((t)==USRQUOTA?"user":"group")
-#define QTYPE2MOPT(on, t) ((t)==USRQUOTA?((on)##USRJQUOTA):((on)##GRPJQUOTA))
-
-static int ext3_write_dquot(struct dquot *dquot);
-static int ext3_acquire_dquot(struct dquot *dquot);
-static int ext3_release_dquot(struct dquot *dquot);
-static int ext3_mark_dquot_dirty(struct dquot *dquot);
-static int ext3_write_info(struct super_block *sb, int type);
-static int ext3_quota_on(struct super_block *sb, int type, int format_id,
- struct path *path);
-static int ext3_quota_on_mount(struct super_block *sb, int type);
-static ssize_t ext3_quota_read(struct super_block *sb, int type, char *data,
- size_t len, loff_t off);
-static ssize_t ext3_quota_write(struct super_block *sb, int type,
- const char *data, size_t len, loff_t off);
-static struct dquot **ext3_get_dquots(struct inode *inode)
-{
- return EXT3_I(inode)->i_dquot;
-}
-
-static const struct dquot_operations ext3_quota_operations = {
- .write_dquot = ext3_write_dquot,
- .acquire_dquot = ext3_acquire_dquot,
- .release_dquot = ext3_release_dquot,
- .mark_dirty = ext3_mark_dquot_dirty,
- .write_info = ext3_write_info,
- .alloc_dquot = dquot_alloc,
- .destroy_dquot = dquot_destroy,
-};
-
-static const struct quotactl_ops ext3_qctl_operations = {
- .quota_on = ext3_quota_on,
- .quota_off = dquot_quota_off,
- .quota_sync = dquot_quota_sync,
- .get_state = dquot_get_state,
- .set_info = dquot_set_dqinfo,
- .get_dqblk = dquot_get_dqblk,
- .set_dqblk = dquot_set_dqblk
-};
-#endif
-
-static const struct super_operations ext3_sops = {
- .alloc_inode = ext3_alloc_inode,
- .destroy_inode = ext3_destroy_inode,
- .write_inode = ext3_write_inode,
- .dirty_inode = ext3_dirty_inode,
- .drop_inode = ext3_drop_inode,
- .evict_inode = ext3_evict_inode,
- .put_super = ext3_put_super,
- .sync_fs = ext3_sync_fs,
- .freeze_fs = ext3_freeze,
- .unfreeze_fs = ext3_unfreeze,
- .statfs = ext3_statfs,
- .remount_fs = ext3_remount,
- .show_options = ext3_show_options,
-#ifdef CONFIG_QUOTA
- .quota_read = ext3_quota_read,
- .quota_write = ext3_quota_write,
- .get_dquots = ext3_get_dquots,
-#endif
- .bdev_try_to_free_page = bdev_try_to_free_page,
-};
-
-static const struct export_operations ext3_export_ops = {
- .fh_to_dentry = ext3_fh_to_dentry,
- .fh_to_parent = ext3_fh_to_parent,
- .get_parent = ext3_get_parent,
-};
-
-enum {
- Opt_bsd_df, Opt_minix_df, Opt_grpid, Opt_nogrpid,
- Opt_resgid, Opt_resuid, Opt_sb, Opt_err_cont, Opt_err_panic, Opt_err_ro,
- Opt_nouid32, Opt_nocheck, Opt_debug, Opt_oldalloc, Opt_orlov,
- Opt_user_xattr, Opt_nouser_xattr, Opt_acl, Opt_noacl,
- Opt_reservation, Opt_noreservation, Opt_noload, Opt_nobh, Opt_bh,
- Opt_commit, Opt_journal_update, Opt_journal_inum, Opt_journal_dev,
- Opt_journal_path,
- Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback,
- Opt_data_err_abort, Opt_data_err_ignore,
- Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota,
- Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_jqfmt_vfsv1, Opt_quota,
- Opt_noquota, Opt_ignore, Opt_barrier, Opt_nobarrier, Opt_err,
- Opt_resize, Opt_usrquota, Opt_grpquota
-};
-
-static const match_table_t tokens = {
- {Opt_bsd_df, "bsddf"},
- {Opt_minix_df, "minixdf"},
- {Opt_grpid, "grpid"},
- {Opt_grpid, "bsdgroups"},
- {Opt_nogrpid, "nogrpid"},
- {Opt_nogrpid, "sysvgroups"},
- {Opt_resgid, "resgid=%u"},
- {Opt_resuid, "resuid=%u"},
- {Opt_sb, "sb=%u"},
- {Opt_err_cont, "errors=continue"},
- {Opt_err_panic, "errors=panic"},
- {Opt_err_ro, "errors=remount-ro"},
- {Opt_nouid32, "nouid32"},
- {Opt_nocheck, "nocheck"},
- {Opt_nocheck, "check=none"},
- {Opt_debug, "debug"},
- {Opt_oldalloc, "oldalloc"},
- {Opt_orlov, "orlov"},
- {Opt_user_xattr, "user_xattr"},
- {Opt_nouser_xattr, "nouser_xattr"},
- {Opt_acl, "acl"},
- {Opt_noacl, "noacl"},
- {Opt_reservation, "reservation"},
- {Opt_noreservation, "noreservation"},
- {Opt_noload, "noload"},
- {Opt_noload, "norecovery"},
- {Opt_nobh, "nobh"},
- {Opt_bh, "bh"},
- {Opt_commit, "commit=%u"},
- {Opt_journal_update, "journal=update"},
- {Opt_journal_inum, "journal=%u"},
- {Opt_journal_dev, "journal_dev=%u"},
- {Opt_journal_path, "journal_path=%s"},
- {Opt_abort, "abort"},
- {Opt_data_journal, "data=journal"},
- {Opt_data_ordered, "data=ordered"},
- {Opt_data_writeback, "data=writeback"},
- {Opt_data_err_abort, "data_err=abort"},
- {Opt_data_err_ignore, "data_err=ignore"},
- {Opt_offusrjquota, "usrjquota="},
- {Opt_usrjquota, "usrjquota=%s"},
- {Opt_offgrpjquota, "grpjquota="},
- {Opt_grpjquota, "grpjquota=%s"},
- {Opt_jqfmt_vfsold, "jqfmt=vfsold"},
- {Opt_jqfmt_vfsv0, "jqfmt=vfsv0"},
- {Opt_jqfmt_vfsv1, "jqfmt=vfsv1"},
- {Opt_grpquota, "grpquota"},
- {Opt_noquota, "noquota"},
- {Opt_quota, "quota"},
- {Opt_usrquota, "usrquota"},
- {Opt_barrier, "barrier=%u"},
- {Opt_barrier, "barrier"},
- {Opt_nobarrier, "nobarrier"},
- {Opt_resize, "resize"},
- {Opt_err, NULL},
-};
-
-static ext3_fsblk_t get_sb_block(void **data, struct super_block *sb)
-{
- ext3_fsblk_t sb_block;
- char *options = (char *) *data;
-
- if (!options || strncmp(options, "sb=", 3) != 0)
- return 1; /* Default location */
- options += 3;
- /*todo: use simple_strtoll with >32bit ext3 */
- sb_block = simple_strtoul(options, &options, 0);
- if (*options && *options != ',') {
- ext3_msg(sb, KERN_ERR, "error: invalid sb specification: %s",
- (char *) *data);
- return 1;
- }
- if (*options == ',')
- options++;
- *data = (void *) options;
- return sb_block;
-}
-
-#ifdef CONFIG_QUOTA
-static int set_qf_name(struct super_block *sb, int qtype, substring_t *args)
-{
- struct ext3_sb_info *sbi = EXT3_SB(sb);
- char *qname;
-
- if (sb_any_quota_loaded(sb) &&
- !sbi->s_qf_names[qtype]) {
- ext3_msg(sb, KERN_ERR,
- "Cannot change journaled "
- "quota options when quota turned on");
- return 0;
- }
- qname = match_strdup(args);
- if (!qname) {
- ext3_msg(sb, KERN_ERR,
- "Not enough memory for storing quotafile name");
- return 0;
- }
- if (sbi->s_qf_names[qtype]) {
- int same = !strcmp(sbi->s_qf_names[qtype], qname);
-
- kfree(qname);
- if (!same) {
- ext3_msg(sb, KERN_ERR,
- "%s quota file already specified",
- QTYPE2NAME(qtype));
- }
- return same;
- }
- if (strchr(qname, '/')) {
- ext3_msg(sb, KERN_ERR,
- "quotafile must be on filesystem root");
- kfree(qname);
- return 0;
- }
- sbi->s_qf_names[qtype] = qname;
- set_opt(sbi->s_mount_opt, QUOTA);
- return 1;
-}
-
-static int clear_qf_name(struct super_block *sb, int qtype) {
-
- struct ext3_sb_info *sbi = EXT3_SB(sb);
-
- if (sb_any_quota_loaded(sb) &&
- sbi->s_qf_names[qtype]) {
- ext3_msg(sb, KERN_ERR, "Cannot change journaled quota options"
- " when quota turned on");
- return 0;
- }
- if (sbi->s_qf_names[qtype]) {
- kfree(sbi->s_qf_names[qtype]);
- sbi->s_qf_names[qtype] = NULL;
- }
- return 1;
-}
-#endif
-
-static int parse_options (char *options, struct super_block *sb,
- unsigned int *inum, unsigned long *journal_devnum,
- ext3_fsblk_t *n_blocks_count, int is_remount)
-{
- struct ext3_sb_info *sbi = EXT3_SB(sb);
- char * p;
- substring_t args[MAX_OPT_ARGS];
- int data_opt = 0;
- int option;
- kuid_t uid;
- kgid_t gid;
- char *journal_path;
- struct inode *journal_inode;
- struct path path;
- int error;
-
-#ifdef CONFIG_QUOTA
- int qfmt;
-#endif
-
- if (!options)
- return 1;
-
- while ((p = strsep (&options, ",")) != NULL) {
- int token;
- if (!*p)
- continue;
- /*
- * Initialize args struct so we know whether arg was
- * found; some options take optional arguments.
- */
- args[0].to = args[0].from = NULL;
- token = match_token(p, tokens, args);
- switch (token) {
- case Opt_bsd_df:
- clear_opt (sbi->s_mount_opt, MINIX_DF);
- break;
- case Opt_minix_df:
- set_opt (sbi->s_mount_opt, MINIX_DF);
- break;
- case Opt_grpid:
- set_opt (sbi->s_mount_opt, GRPID);
- break;
- case Opt_nogrpid:
- clear_opt (sbi->s_mount_opt, GRPID);
- break;
- case Opt_resuid:
- if (match_int(&args[0], &option))
- return 0;
- uid = make_kuid(current_user_ns(), option);
- if (!uid_valid(uid)) {
- ext3_msg(sb, KERN_ERR, "Invalid uid value %d", option);
- return 0;
-
- }
- sbi->s_resuid = uid;
- break;
- case Opt_resgid:
- if (match_int(&args[0], &option))
- return 0;
- gid = make_kgid(current_user_ns(), option);
- if (!gid_valid(gid)) {
- ext3_msg(sb, KERN_ERR, "Invalid gid value %d", option);
- return 0;
- }
- sbi->s_resgid = gid;
- break;
- case Opt_sb:
- /* handled by get_sb_block() instead of here */
- /* *sb_block = match_int(&args[0]); */
- break;
- case Opt_err_panic:
- clear_opt (sbi->s_mount_opt, ERRORS_CONT);
- clear_opt (sbi->s_mount_opt, ERRORS_RO);
- set_opt (sbi->s_mount_opt, ERRORS_PANIC);
- break;
- case Opt_err_ro:
- clear_opt (sbi->s_mount_opt, ERRORS_CONT);
- clear_opt (sbi->s_mount_opt, ERRORS_PANIC);
- set_opt (sbi->s_mount_opt, ERRORS_RO);
- break;
- case Opt_err_cont:
- clear_opt (sbi->s_mount_opt, ERRORS_RO);
- clear_opt (sbi->s_mount_opt, ERRORS_PANIC);
- set_opt (sbi->s_mount_opt, ERRORS_CONT);
- break;
- case Opt_nouid32:
- set_opt (sbi->s_mount_opt, NO_UID32);
- break;
- case Opt_nocheck:
- clear_opt (sbi->s_mount_opt, CHECK);
- break;
- case Opt_debug:
- set_opt (sbi->s_mount_opt, DEBUG);
- break;
- case Opt_oldalloc:
- ext3_msg(sb, KERN_WARNING,
- "Ignoring deprecated oldalloc option");
- break;
- case Opt_orlov:
- ext3_msg(sb, KERN_WARNING,
- "Ignoring deprecated orlov option");
- break;
-#ifdef CONFIG_EXT3_FS_XATTR
- case Opt_user_xattr:
- set_opt (sbi->s_mount_opt, XATTR_USER);
- break;
- case Opt_nouser_xattr:
- clear_opt (sbi->s_mount_opt, XATTR_USER);
- break;
-#else
- case Opt_user_xattr:
- case Opt_nouser_xattr:
- ext3_msg(sb, KERN_INFO,
- "(no)user_xattr options not supported");
- break;
-#endif
-#ifdef CONFIG_EXT3_FS_POSIX_ACL
- case Opt_acl:
- set_opt(sbi->s_mount_opt, POSIX_ACL);
- break;
- case Opt_noacl:
- clear_opt(sbi->s_mount_opt, POSIX_ACL);
- break;
-#else
- case Opt_acl:
- case Opt_noacl:
- ext3_msg(sb, KERN_INFO,
- "(no)acl options not supported");
- break;
-#endif
- case Opt_reservation:
- set_opt(sbi->s_mount_opt, RESERVATION);
- break;
- case Opt_noreservation:
- clear_opt(sbi->s_mount_opt, RESERVATION);
- break;
- case Opt_journal_update:
- /* @@@ FIXME */
- /* Eventually we will want to be able to create
- a journal file here. For now, only allow the
- user to specify an existing inode to be the
- journal file. */
- if (is_remount) {
- ext3_msg(sb, KERN_ERR, "error: cannot specify "
- "journal on remount");
- return 0;
- }
- set_opt (sbi->s_mount_opt, UPDATE_JOURNAL);
- break;
- case Opt_journal_inum:
- if (is_remount) {
- ext3_msg(sb, KERN_ERR, "error: cannot specify "
- "journal on remount");
- return 0;
- }
- if (match_int(&args[0], &option))
- return 0;
- *inum = option;
- break;
- case Opt_journal_dev:
- if (is_remount) {
- ext3_msg(sb, KERN_ERR, "error: cannot specify "
- "journal on remount");
- return 0;
- }
- if (match_int(&args[0], &option))
- return 0;
- *journal_devnum = option;
- break;
- case Opt_journal_path:
- if (is_remount) {
- ext3_msg(sb, KERN_ERR, "error: cannot specify "
- "journal on remount");
- return 0;
- }
-
- journal_path = match_strdup(&args[0]);
- if (!journal_path) {
- ext3_msg(sb, KERN_ERR, "error: could not dup "
- "journal device string");
- return 0;
- }
-
- error = kern_path(journal_path, LOOKUP_FOLLOW, &path);
- if (error) {
- ext3_msg(sb, KERN_ERR, "error: could not find "
- "journal device path: error %d", error);
- kfree(journal_path);
- return 0;
- }
-
- journal_inode = d_inode(path.dentry);
- if (!S_ISBLK(journal_inode->i_mode)) {
- ext3_msg(sb, KERN_ERR, "error: journal path %s "
- "is not a block device", journal_path);
- path_put(&path);
- kfree(journal_path);
- return 0;
- }
-
- *journal_devnum = new_encode_dev(journal_inode->i_rdev);
- path_put(&path);
- kfree(journal_path);
- break;
- case Opt_noload:
- set_opt (sbi->s_mount_opt, NOLOAD);
- break;
- case Opt_commit:
- if (match_int(&args[0], &option))
- return 0;
- if (option < 0)
- return 0;
- if (option == 0)
- option = JBD_DEFAULT_MAX_COMMIT_AGE;
- sbi->s_commit_interval = HZ * option;
- break;
- case Opt_data_journal:
- data_opt = EXT3_MOUNT_JOURNAL_DATA;
- goto datacheck;
- case Opt_data_ordered:
- data_opt = EXT3_MOUNT_ORDERED_DATA;
- goto datacheck;
- case Opt_data_writeback:
- data_opt = EXT3_MOUNT_WRITEBACK_DATA;
- datacheck:
- if (is_remount) {
- if (test_opt(sb, DATA_FLAGS) == data_opt)
- break;
- ext3_msg(sb, KERN_ERR,
- "error: cannot change "
- "data mode on remount. The filesystem "
- "is mounted in data=%s mode and you "
- "try to remount it in data=%s mode.",
- data_mode_string(test_opt(sb,
- DATA_FLAGS)),
- data_mode_string(data_opt));
- return 0;
- } else {
- clear_opt(sbi->s_mount_opt, DATA_FLAGS);
- sbi->s_mount_opt |= data_opt;
- }
- break;
- case Opt_data_err_abort:
- set_opt(sbi->s_mount_opt, DATA_ERR_ABORT);
- break;
- case Opt_data_err_ignore:
- clear_opt(sbi->s_mount_opt, DATA_ERR_ABORT);
- break;
-#ifdef CONFIG_QUOTA
- case Opt_usrjquota:
- if (!set_qf_name(sb, USRQUOTA, &args[0]))
- return 0;
- break;
- case Opt_grpjquota:
- if (!set_qf_name(sb, GRPQUOTA, &args[0]))
- return 0;
- break;
- case Opt_offusrjquota:
- if (!clear_qf_name(sb, USRQUOTA))
- return 0;
- break;
- case Opt_offgrpjquota:
- if (!clear_qf_name(sb, GRPQUOTA))
- return 0;
- break;
- case Opt_jqfmt_vfsold:
- qfmt = QFMT_VFS_OLD;
- goto set_qf_format;
- case Opt_jqfmt_vfsv0:
- qfmt = QFMT_VFS_V0;
- goto set_qf_format;
- case Opt_jqfmt_vfsv1:
- qfmt = QFMT_VFS_V1;
-set_qf_format:
- if (sb_any_quota_loaded(sb) &&
- sbi->s_jquota_fmt != qfmt) {
- ext3_msg(sb, KERN_ERR, "error: cannot change "
- "journaled quota options when "
- "quota turned on.");
- return 0;
- }
- sbi->s_jquota_fmt = qfmt;
- break;
- case Opt_quota:
- case Opt_usrquota:
- set_opt(sbi->s_mount_opt, QUOTA);
- set_opt(sbi->s_mount_opt, USRQUOTA);
- break;
- case Opt_grpquota:
- set_opt(sbi->s_mount_opt, QUOTA);
- set_opt(sbi->s_mount_opt, GRPQUOTA);
- break;
- case Opt_noquota:
- if (sb_any_quota_loaded(sb)) {
- ext3_msg(sb, KERN_ERR, "error: cannot change "
- "quota options when quota turned on.");
- return 0;
- }
- clear_opt(sbi->s_mount_opt, QUOTA);
- clear_opt(sbi->s_mount_opt, USRQUOTA);
- clear_opt(sbi->s_mount_opt, GRPQUOTA);
- break;
-#else
- case Opt_quota:
- case Opt_usrquota:
- case Opt_grpquota:
- ext3_msg(sb, KERN_ERR,
- "error: quota options not supported.");
- break;
- case Opt_usrjquota:
- case Opt_grpjquota:
- case Opt_offusrjquota:
- case Opt_offgrpjquota:
- case Opt_jqfmt_vfsold:
- case Opt_jqfmt_vfsv0:
- case Opt_jqfmt_vfsv1:
- ext3_msg(sb, KERN_ERR,
- "error: journaled quota options not "
- "supported.");
- break;
- case Opt_noquota:
- break;
-#endif
- case Opt_abort:
- set_opt(sbi->s_mount_opt, ABORT);
- break;
- case Opt_nobarrier:
- clear_opt(sbi->s_mount_opt, BARRIER);
- break;
- case Opt_barrier:
- if (args[0].from) {
- if (match_int(&args[0], &option))
- return 0;
- } else
- option = 1; /* No argument, default to 1 */
- if (option)
- set_opt(sbi->s_mount_opt, BARRIER);
- else
- clear_opt(sbi->s_mount_opt, BARRIER);
- break;
- case Opt_ignore:
- break;
- case Opt_resize:
- if (!is_remount) {
- ext3_msg(sb, KERN_ERR,
- "error: resize option only available "
- "for remount");
- return 0;
- }
- if (match_int(&args[0], &option) != 0)
- return 0;
- *n_blocks_count = option;
- break;
- case Opt_nobh:
- ext3_msg(sb, KERN_WARNING,
- "warning: ignoring deprecated nobh option");
- break;
- case Opt_bh:
- ext3_msg(sb, KERN_WARNING,
- "warning: ignoring deprecated bh option");
- break;
- default:
- ext3_msg(sb, KERN_ERR,
- "error: unrecognized mount option \"%s\" "
- "or missing value", p);
- return 0;
- }
- }
-#ifdef CONFIG_QUOTA
- if (sbi->s_qf_names[USRQUOTA] || sbi->s_qf_names[GRPQUOTA]) {
- if (test_opt(sb, USRQUOTA) && sbi->s_qf_names[USRQUOTA])
- clear_opt(sbi->s_mount_opt, USRQUOTA);
- if (test_opt(sb, GRPQUOTA) && sbi->s_qf_names[GRPQUOTA])
- clear_opt(sbi->s_mount_opt, GRPQUOTA);
-
- if (test_opt(sb, GRPQUOTA) || test_opt(sb, USRQUOTA)) {
- ext3_msg(sb, KERN_ERR, "error: old and new quota "
- "format mixing.");
- return 0;
- }
-
- if (!sbi->s_jquota_fmt) {
- ext3_msg(sb, KERN_ERR, "error: journaled quota format "
- "not specified.");
- return 0;
- }
- }
-#endif
- return 1;
-}
-
-static int ext3_setup_super(struct super_block *sb, struct ext3_super_block *es,
- int read_only)
-{
- struct ext3_sb_info *sbi = EXT3_SB(sb);
- int res = 0;
-
- if (le32_to_cpu(es->s_rev_level) > EXT3_MAX_SUPP_REV) {
- ext3_msg(sb, KERN_ERR,
- "error: revision level too high, "
- "forcing read-only mode");
- res = MS_RDONLY;
- }
- if (read_only)
- return res;
- if (!(sbi->s_mount_state & EXT3_VALID_FS))
- ext3_msg(sb, KERN_WARNING,
- "warning: mounting unchecked fs, "
- "running e2fsck is recommended");
- else if ((sbi->s_mount_state & EXT3_ERROR_FS))
- ext3_msg(sb, KERN_WARNING,
- "warning: mounting fs with errors, "
- "running e2fsck is recommended");
- else if ((__s16) le16_to_cpu(es->s_max_mnt_count) > 0 &&
- le16_to_cpu(es->s_mnt_count) >=
- le16_to_cpu(es->s_max_mnt_count))
- ext3_msg(sb, KERN_WARNING,
- "warning: maximal mount count reached, "
- "running e2fsck is recommended");
- else if (le32_to_cpu(es->s_checkinterval) &&
- (le32_to_cpu(es->s_lastcheck) +
- le32_to_cpu(es->s_checkinterval) <= get_seconds()))
- ext3_msg(sb, KERN_WARNING,
- "warning: checktime reached, "
- "running e2fsck is recommended");
-#if 0
- /* @@@ We _will_ want to clear the valid bit if we find
- inconsistencies, to force a fsck at reboot. But for
- a plain journaled filesystem we can keep it set as
- valid forever! :) */
- es->s_state &= cpu_to_le16(~EXT3_VALID_FS);
-#endif
- if (!le16_to_cpu(es->s_max_mnt_count))
- es->s_max_mnt_count = cpu_to_le16(EXT3_DFL_MAX_MNT_COUNT);
- le16_add_cpu(&es->s_mnt_count, 1);
- es->s_mtime = cpu_to_le32(get_seconds());
- ext3_update_dynamic_rev(sb);
- EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
-
- ext3_commit_super(sb, es, 1);
- if (test_opt(sb, DEBUG))
- ext3_msg(sb, KERN_INFO, "[bs=%lu, gc=%lu, "
- "bpg=%lu, ipg=%lu, mo=%04lx]",
- sb->s_blocksize,
- sbi->s_groups_count,
- EXT3_BLOCKS_PER_GROUP(sb),
- EXT3_INODES_PER_GROUP(sb),
- sbi->s_mount_opt);
-
- if (EXT3_SB(sb)->s_journal->j_inode == NULL) {
- char b[BDEVNAME_SIZE];
- ext3_msg(sb, KERN_INFO, "using external journal on %s",
- bdevname(EXT3_SB(sb)->s_journal->j_dev, b));
- } else {
- ext3_msg(sb, KERN_INFO, "using internal journal");
- }
- cleancache_init_fs(sb);
- return res;
-}
-
-/* Called at mount-time, super-block is locked */
-static int ext3_check_descriptors(struct super_block *sb)
-{
- struct ext3_sb_info *sbi = EXT3_SB(sb);
- int i;
-
- ext3_debug ("Checking group descriptors");
-
- for (i = 0; i < sbi->s_groups_count; i++) {
- struct ext3_group_desc *gdp = ext3_get_group_desc(sb, i, NULL);
- ext3_fsblk_t first_block = ext3_group_first_block_no(sb, i);
- ext3_fsblk_t last_block;
-
- if (i == sbi->s_groups_count - 1)
- last_block = le32_to_cpu(sbi->s_es->s_blocks_count) - 1;
- else
- last_block = first_block +
- (EXT3_BLOCKS_PER_GROUP(sb) - 1);
-
- if (le32_to_cpu(gdp->bg_block_bitmap) < first_block ||
- le32_to_cpu(gdp->bg_block_bitmap) > last_block)
- {
- ext3_error (sb, "ext3_check_descriptors",
- "Block bitmap for group %d"
- " not in group (block %lu)!",
- i, (unsigned long)
- le32_to_cpu(gdp->bg_block_bitmap));
- return 0;
- }
- if (le32_to_cpu(gdp->bg_inode_bitmap) < first_block ||
- le32_to_cpu(gdp->bg_inode_bitmap) > last_block)
- {
- ext3_error (sb, "ext3_check_descriptors",
- "Inode bitmap for group %d"
- " not in group (block %lu)!",
- i, (unsigned long)
- le32_to_cpu(gdp->bg_inode_bitmap));
- return 0;
- }
- if (le32_to_cpu(gdp->bg_inode_table) < first_block ||
- le32_to_cpu(gdp->bg_inode_table) + sbi->s_itb_per_group - 1 >
- last_block)
- {
- ext3_error (sb, "ext3_check_descriptors",
- "Inode table for group %d"
- " not in group (block %lu)!",
- i, (unsigned long)
- le32_to_cpu(gdp->bg_inode_table));
- return 0;
- }
- }
-
- sbi->s_es->s_free_blocks_count=cpu_to_le32(ext3_count_free_blocks(sb));
- sbi->s_es->s_free_inodes_count=cpu_to_le32(ext3_count_free_inodes(sb));
- return 1;
-}
-
-
-/* ext3_orphan_cleanup() walks a singly-linked list of inodes (starting at
- * the superblock) which were deleted from all directories, but held open by
- * a process at the time of a crash. We walk the list and try to delete these
- * inodes at recovery time (only with a read-write filesystem).
- *
- * In order to keep the orphan inode chain consistent during traversal (in
- * case of crash during recovery), we link each inode into the superblock
- * orphan list_head and handle it the same way as an inode deletion during
- * normal operation (which journals the operations for us).
- *
- * We only do an iget() and an iput() on each inode, which is very safe if we
- * accidentally point at an in-use or already deleted inode. The worst that
- * can happen in this case is that we get a "bit already cleared" message from
- * ext3_free_inode(). The only reason we would point at a wrong inode is if
- * e2fsck was run on this filesystem, and it must have already done the orphan
- * inode cleanup for us, so we can safely abort without any further action.
- */
-static void ext3_orphan_cleanup (struct super_block * sb,
- struct ext3_super_block * es)
-{
- unsigned int s_flags = sb->s_flags;
- int nr_orphans = 0, nr_truncates = 0;
-#ifdef CONFIG_QUOTA
- int i;
-#endif
- if (!es->s_last_orphan) {
- jbd_debug(4, "no orphan inodes to clean up\n");
- return;
- }
-
- if (bdev_read_only(sb->s_bdev)) {
- ext3_msg(sb, KERN_ERR, "error: write access "
- "unavailable, skipping orphan cleanup.");
- return;
- }
-
- /* Check if feature set allows readwrite operations */
- if (EXT3_HAS_RO_COMPAT_FEATURE(sb, ~EXT3_FEATURE_RO_COMPAT_SUPP)) {
- ext3_msg(sb, KERN_INFO, "Skipping orphan cleanup due to "
- "unknown ROCOMPAT features");
- return;
- }
-
- if (EXT3_SB(sb)->s_mount_state & EXT3_ERROR_FS) {
- /* don't clear list on RO mount w/ errors */
- if (es->s_last_orphan && !(s_flags & MS_RDONLY)) {
- jbd_debug(1, "Errors on filesystem, "
- "clearing orphan list.\n");
- es->s_last_orphan = 0;
- }
- jbd_debug(1, "Skipping orphan recovery on fs with errors.\n");
- return;
- }
-
- if (s_flags & MS_RDONLY) {
- ext3_msg(sb, KERN_INFO, "orphan cleanup on readonly fs");
- sb->s_flags &= ~MS_RDONLY;
- }
-#ifdef CONFIG_QUOTA
- /* Needed for iput() to work correctly and not trash data */
- sb->s_flags |= MS_ACTIVE;
- /* Turn on quotas so that they are updated correctly */
- for (i = 0; i < EXT3_MAXQUOTAS; i++) {
- if (EXT3_SB(sb)->s_qf_names[i]) {
- int ret = ext3_quota_on_mount(sb, i);
- if (ret < 0)
- ext3_msg(sb, KERN_ERR,
- "error: cannot turn on journaled "
- "quota: %d", ret);
- }
- }
-#endif
-
- while (es->s_last_orphan) {
- struct inode *inode;
-
- inode = ext3_orphan_get(sb, le32_to_cpu(es->s_last_orphan));
- if (IS_ERR(inode)) {
- es->s_last_orphan = 0;
- break;
- }
-
- list_add(&EXT3_I(inode)->i_orphan, &EXT3_SB(sb)->s_orphan);
- dquot_initialize(inode);
- if (inode->i_nlink) {
- printk(KERN_DEBUG
- "%s: truncating inode %lu to %Ld bytes\n",
- __func__, inode->i_ino, inode->i_size);
- jbd_debug(2, "truncating inode %lu to %Ld bytes\n",
- inode->i_ino, inode->i_size);
- ext3_truncate(inode);
- nr_truncates++;
- } else {
- printk(KERN_DEBUG
- "%s: deleting unreferenced inode %lu\n",
- __func__, inode->i_ino);
- jbd_debug(2, "deleting unreferenced inode %lu\n",
- inode->i_ino);
- nr_orphans++;
- }
- iput(inode); /* The delete magic happens here! */
- }
-
-#define PLURAL(x) (x), ((x)==1) ? "" : "s"
-
- if (nr_orphans)
- ext3_msg(sb, KERN_INFO, "%d orphan inode%s deleted",
- PLURAL(nr_orphans));
- if (nr_truncates)
- ext3_msg(sb, KERN_INFO, "%d truncate%s cleaned up",
- PLURAL(nr_truncates));
-#ifdef CONFIG_QUOTA
- /* Turn quotas off */
- for (i = 0; i < EXT3_MAXQUOTAS; i++) {
- if (sb_dqopt(sb)->files[i])
- dquot_quota_off(sb, i);
- }
-#endif
- sb->s_flags = s_flags; /* Restore MS_RDONLY status */
-}
-
-/*
- * Maximal file size. There is a direct, and {,double-,triple-}indirect
- * block limit, and also a limit of (2^32 - 1) 512-byte sectors in i_blocks.
- * We need to be 1 filesystem block less than the 2^32 sector limit.
- */
-static loff_t ext3_max_size(int bits)
-{
- loff_t res = EXT3_NDIR_BLOCKS;
- int meta_blocks;
- loff_t upper_limit;
-
- /* This is calculated to be the largest file size for a
- * dense, file such that the total number of
- * sectors in the file, including data and all indirect blocks,
- * does not exceed 2^32 -1
- * __u32 i_blocks representing the total number of
- * 512 bytes blocks of the file
- */
- upper_limit = (1LL << 32) - 1;
-
- /* total blocks in file system block size */
- upper_limit >>= (bits - 9);
-
-
- /* indirect blocks */
- meta_blocks = 1;
- /* double indirect blocks */
- meta_blocks += 1 + (1LL << (bits-2));
- /* tripple indirect blocks */
- meta_blocks += 1 + (1LL << (bits-2)) + (1LL << (2*(bits-2)));
-
- upper_limit -= meta_blocks;
- upper_limit <<= bits;
-
- res += 1LL << (bits-2);
- res += 1LL << (2*(bits-2));
- res += 1LL << (3*(bits-2));
- res <<= bits;
- if (res > upper_limit)
- res = upper_limit;
-
- if (res > MAX_LFS_FILESIZE)
- res = MAX_LFS_FILESIZE;
-
- return res;
-}
-
-static ext3_fsblk_t descriptor_loc(struct super_block *sb,
- ext3_fsblk_t logic_sb_block,
- int nr)
-{
- struct ext3_sb_info *sbi = EXT3_SB(sb);
- unsigned long bg, first_meta_bg;
- int has_super = 0;
-
- first_meta_bg = le32_to_cpu(sbi->s_es->s_first_meta_bg);
-
- if (!EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_META_BG) ||
- nr < first_meta_bg)
- return (logic_sb_block + nr + 1);
- bg = sbi->s_desc_per_block * nr;
- if (ext3_bg_has_super(sb, bg))
- has_super = 1;
- return (has_super + ext3_group_first_block_no(sb, bg));
-}
-
-
-static int ext3_fill_super (struct super_block *sb, void *data, int silent)
-{
- struct buffer_head * bh;
- struct ext3_super_block *es = NULL;
- struct ext3_sb_info *sbi;
- ext3_fsblk_t block;
- ext3_fsblk_t sb_block = get_sb_block(&data, sb);
- ext3_fsblk_t logic_sb_block;
- unsigned long offset = 0;
- unsigned int journal_inum = 0;
- unsigned long journal_devnum = 0;
- unsigned long def_mount_opts;
- struct inode *root;
- int blocksize;
- int hblock;
- int db_count;
- int i;
- int needs_recovery;
- int ret = -EINVAL;
- __le32 features;
- int err;
-
- sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
- if (!sbi)
- return -ENOMEM;
-
- sbi->s_blockgroup_lock =
- kzalloc(sizeof(struct blockgroup_lock), GFP_KERNEL);
- if (!sbi->s_blockgroup_lock) {
- kfree(sbi);
- return -ENOMEM;
- }
- sb->s_fs_info = sbi;
- sbi->s_sb_block = sb_block;
-
- blocksize = sb_min_blocksize(sb, EXT3_MIN_BLOCK_SIZE);
- if (!blocksize) {
- ext3_msg(sb, KERN_ERR, "error: unable to set blocksize");
- goto out_fail;
- }
-
- /*
- * The ext3 superblock will not be buffer aligned for other than 1kB
- * block sizes. We need to calculate the offset from buffer start.
- */
- if (blocksize != EXT3_MIN_BLOCK_SIZE) {
- logic_sb_block = (sb_block * EXT3_MIN_BLOCK_SIZE) / blocksize;
- offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize;
- } else {
- logic_sb_block = sb_block;
- }
-
- if (!(bh = sb_bread(sb, logic_sb_block))) {
- ext3_msg(sb, KERN_ERR, "error: unable to read superblock");
- goto out_fail;
- }
- /*
- * Note: s_es must be initialized as soon as possible because
- * some ext3 macro-instructions depend on its value
- */
- es = (struct ext3_super_block *) (bh->b_data + offset);
- sbi->s_es = es;
- sb->s_magic = le16_to_cpu(es->s_magic);
- if (sb->s_magic != EXT3_SUPER_MAGIC)
- goto cantfind_ext3;
-
- /* Set defaults before we parse the mount options */
- def_mount_opts = le32_to_cpu(es->s_default_mount_opts);
- if (def_mount_opts & EXT3_DEFM_DEBUG)
- set_opt(sbi->s_mount_opt, DEBUG);
- if (def_mount_opts & EXT3_DEFM_BSDGROUPS)
- set_opt(sbi->s_mount_opt, GRPID);
- if (def_mount_opts & EXT3_DEFM_UID16)
- set_opt(sbi->s_mount_opt, NO_UID32);
-#ifdef CONFIG_EXT3_FS_XATTR
- if (def_mount_opts & EXT3_DEFM_XATTR_USER)
- set_opt(sbi->s_mount_opt, XATTR_USER);
-#endif
-#ifdef CONFIG_EXT3_FS_POSIX_ACL
- if (def_mount_opts & EXT3_DEFM_ACL)
- set_opt(sbi->s_mount_opt, POSIX_ACL);
-#endif
- if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_DATA)
- set_opt(sbi->s_mount_opt, JOURNAL_DATA);
- else if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_ORDERED)
- set_opt(sbi->s_mount_opt, ORDERED_DATA);
- else if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_WBACK)
- set_opt(sbi->s_mount_opt, WRITEBACK_DATA);
-
- if (le16_to_cpu(sbi->s_es->s_errors) == EXT3_ERRORS_PANIC)
- set_opt(sbi->s_mount_opt, ERRORS_PANIC);
- else if (le16_to_cpu(sbi->s_es->s_errors) == EXT3_ERRORS_CONTINUE)
- set_opt(sbi->s_mount_opt, ERRORS_CONT);
- else
- set_opt(sbi->s_mount_opt, ERRORS_RO);
-
- sbi->s_resuid = make_kuid(&init_user_ns, le16_to_cpu(es->s_def_resuid));
- sbi->s_resgid = make_kgid(&init_user_ns, le16_to_cpu(es->s_def_resgid));
-
- /* enable barriers by default */
- set_opt(sbi->s_mount_opt, BARRIER);
- set_opt(sbi->s_mount_opt, RESERVATION);
-
- if (!parse_options ((char *) data, sb, &journal_inum, &journal_devnum,
- NULL, 0))
- goto failed_mount;
-
- sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
- (test_opt(sb, POSIX_ACL) ? MS_POSIXACL : 0);
-
- if (le32_to_cpu(es->s_rev_level) == EXT3_GOOD_OLD_REV &&
- (EXT3_HAS_COMPAT_FEATURE(sb, ~0U) ||
- EXT3_HAS_RO_COMPAT_FEATURE(sb, ~0U) ||
- EXT3_HAS_INCOMPAT_FEATURE(sb, ~0U)))
- ext3_msg(sb, KERN_WARNING,
- "warning: feature flags set on rev 0 fs, "
- "running e2fsck is recommended");
- /*
- * Check feature flags regardless of the revision level, since we
- * previously didn't change the revision level when setting the flags,
- * so there is a chance incompat flags are set on a rev 0 filesystem.
- */
- features = EXT3_HAS_INCOMPAT_FEATURE(sb, ~EXT3_FEATURE_INCOMPAT_SUPP);
- if (features) {
- ext3_msg(sb, KERN_ERR,
- "error: couldn't mount because of unsupported "
- "optional features (%x)", le32_to_cpu(features));
- goto failed_mount;
- }
- features = EXT3_HAS_RO_COMPAT_FEATURE(sb, ~EXT3_FEATURE_RO_COMPAT_SUPP);
- if (!(sb->s_flags & MS_RDONLY) && features) {
- ext3_msg(sb, KERN_ERR,
- "error: couldn't mount RDWR because of unsupported "
- "optional features (%x)", le32_to_cpu(features));
- goto failed_mount;
- }
- blocksize = BLOCK_SIZE << le32_to_cpu(es->s_log_block_size);
-
- if (blocksize < EXT3_MIN_BLOCK_SIZE ||
- blocksize > EXT3_MAX_BLOCK_SIZE) {
- ext3_msg(sb, KERN_ERR,
- "error: couldn't mount because of unsupported "
- "filesystem blocksize %d", blocksize);
- goto failed_mount;
- }
-
- hblock = bdev_logical_block_size(sb->s_bdev);
- if (sb->s_blocksize != blocksize) {
- /*
- * Make sure the blocksize for the filesystem is larger
- * than the hardware sectorsize for the machine.
- */
- if (blocksize < hblock) {
- ext3_msg(sb, KERN_ERR,
- "error: fsblocksize %d too small for "
- "hardware sectorsize %d", blocksize, hblock);
- goto failed_mount;
- }
-
- brelse (bh);
- if (!sb_set_blocksize(sb, blocksize)) {
- ext3_msg(sb, KERN_ERR,
- "error: bad blocksize %d", blocksize);
- goto out_fail;
- }
- logic_sb_block = (sb_block * EXT3_MIN_BLOCK_SIZE) / blocksize;
- offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize;
- bh = sb_bread(sb, logic_sb_block);
- if (!bh) {
- ext3_msg(sb, KERN_ERR,
- "error: can't read superblock on 2nd try");
- goto failed_mount;
- }
- es = (struct ext3_super_block *)(bh->b_data + offset);
- sbi->s_es = es;
- if (es->s_magic != cpu_to_le16(EXT3_SUPER_MAGIC)) {
- ext3_msg(sb, KERN_ERR,
- "error: magic mismatch");
- goto failed_mount;
- }
- }
-
- sb->s_maxbytes = ext3_max_size(sb->s_blocksize_bits);
-
- if (le32_to_cpu(es->s_rev_level) == EXT3_GOOD_OLD_REV) {
- sbi->s_inode_size = EXT3_GOOD_OLD_INODE_SIZE;
- sbi->s_first_ino = EXT3_GOOD_OLD_FIRST_INO;
- } else {
- sbi->s_inode_size = le16_to_cpu(es->s_inode_size);
- sbi->s_first_ino = le32_to_cpu(es->s_first_ino);
- if ((sbi->s_inode_size < EXT3_GOOD_OLD_INODE_SIZE) ||
- (!is_power_of_2(sbi->s_inode_size)) ||
- (sbi->s_inode_size > blocksize)) {
- ext3_msg(sb, KERN_ERR,
- "error: unsupported inode size: %d",
- sbi->s_inode_size);
- goto failed_mount;
- }
- }
- sbi->s_frag_size = EXT3_MIN_FRAG_SIZE <<
- le32_to_cpu(es->s_log_frag_size);
- if (blocksize != sbi->s_frag_size) {
- ext3_msg(sb, KERN_ERR,
- "error: fragsize %lu != blocksize %u (unsupported)",
- sbi->s_frag_size, blocksize);
- goto failed_mount;
- }
- sbi->s_frags_per_block = 1;
- sbi->s_blocks_per_group = le32_to_cpu(es->s_blocks_per_group);
- sbi->s_frags_per_group = le32_to_cpu(es->s_frags_per_group);
- sbi->s_inodes_per_group = le32_to_cpu(es->s_inodes_per_group);
- if (EXT3_INODE_SIZE(sb) == 0 || EXT3_INODES_PER_GROUP(sb) == 0)
- goto cantfind_ext3;
- sbi->s_inodes_per_block = blocksize / EXT3_INODE_SIZE(sb);
- if (sbi->s_inodes_per_block == 0)
- goto cantfind_ext3;
- sbi->s_itb_per_group = sbi->s_inodes_per_group /
- sbi->s_inodes_per_block;
- sbi->s_desc_per_block = blocksize / sizeof(struct ext3_group_desc);
- sbi->s_sbh = bh;
- sbi->s_mount_state = le16_to_cpu(es->s_state);
- sbi->s_addr_per_block_bits = ilog2(EXT3_ADDR_PER_BLOCK(sb));
- sbi->s_desc_per_block_bits = ilog2(EXT3_DESC_PER_BLOCK(sb));
- for (i = 0; i < 4; i++)
- sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]);
- sbi->s_def_hash_version = es->s_def_hash_version;
- i = le32_to_cpu(es->s_flags);
- if (i & EXT2_FLAGS_UNSIGNED_HASH)
- sbi->s_hash_unsigned = 3;
- else if ((i & EXT2_FLAGS_SIGNED_HASH) == 0) {
-#ifdef __CHAR_UNSIGNED__
- es->s_flags |= cpu_to_le32(EXT2_FLAGS_UNSIGNED_HASH);
- sbi->s_hash_unsigned = 3;
-#else
- es->s_flags |= cpu_to_le32(EXT2_FLAGS_SIGNED_HASH);
-#endif
- }
-
- if (sbi->s_blocks_per_group > blocksize * 8) {
- ext3_msg(sb, KERN_ERR,
- "#blocks per group too big: %lu",
- sbi->s_blocks_per_group);
- goto failed_mount;
- }
- if (sbi->s_frags_per_group > blocksize * 8) {
- ext3_msg(sb, KERN_ERR,
- "error: #fragments per group too big: %lu",
- sbi->s_frags_per_group);
- goto failed_mount;
- }
- if (sbi->s_inodes_per_group > blocksize * 8) {
- ext3_msg(sb, KERN_ERR,
- "error: #inodes per group too big: %lu",
- sbi->s_inodes_per_group);
- goto failed_mount;
- }
-
- err = generic_check_addressable(sb->s_blocksize_bits,
- le32_to_cpu(es->s_blocks_count));
- if (err) {
- ext3_msg(sb, KERN_ERR,
- "error: filesystem is too large to mount safely");
- if (sizeof(sector_t) < 8)
- ext3_msg(sb, KERN_ERR,
- "error: CONFIG_LBDAF not enabled");
- ret = err;
- goto failed_mount;
- }
-
- if (EXT3_BLOCKS_PER_GROUP(sb) == 0)
- goto cantfind_ext3;
- sbi->s_groups_count = ((le32_to_cpu(es->s_blocks_count) -
- le32_to_cpu(es->s_first_data_block) - 1)
- / EXT3_BLOCKS_PER_GROUP(sb)) + 1;
- db_count = DIV_ROUND_UP(sbi->s_groups_count, EXT3_DESC_PER_BLOCK(sb));
- sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *),
- GFP_KERNEL);
- if (sbi->s_group_desc == NULL) {
- ext3_msg(sb, KERN_ERR,
- "error: not enough memory");
- ret = -ENOMEM;
- goto failed_mount;
- }
-
- bgl_lock_init(sbi->s_blockgroup_lock);
-
- for (i = 0; i < db_count; i++) {
- block = descriptor_loc(sb, logic_sb_block, i);
- sbi->s_group_desc[i] = sb_bread(sb, block);
- if (!sbi->s_group_desc[i]) {
- ext3_msg(sb, KERN_ERR,
- "error: can't read group descriptor %d", i);
- db_count = i;
- goto failed_mount2;
- }
- }
- if (!ext3_check_descriptors (sb)) {
- ext3_msg(sb, KERN_ERR,
- "error: group descriptors corrupted");
- goto failed_mount2;
- }
- sbi->s_gdb_count = db_count;
- get_random_bytes(&sbi->s_next_generation, sizeof(u32));
- spin_lock_init(&sbi->s_next_gen_lock);
-
- /* per fileystem reservation list head & lock */
- spin_lock_init(&sbi->s_rsv_window_lock);
- sbi->s_rsv_window_root = RB_ROOT;
- /* Add a single, static dummy reservation to the start of the
- * reservation window list --- it gives us a placeholder for
- * append-at-start-of-list which makes the allocation logic
- * _much_ simpler. */
- sbi->s_rsv_window_head.rsv_start = EXT3_RESERVE_WINDOW_NOT_ALLOCATED;
- sbi->s_rsv_window_head.rsv_end = EXT3_RESERVE_WINDOW_NOT_ALLOCATED;
- sbi->s_rsv_window_head.rsv_alloc_hit = 0;
- sbi->s_rsv_window_head.rsv_goal_size = 0;
- ext3_rsv_window_add(sb, &sbi->s_rsv_window_head);
-
- /*
- * set up enough so that it can read an inode
- */
- sb->s_op = &ext3_sops;
- sb->s_export_op = &ext3_export_ops;
- sb->s_xattr = ext3_xattr_handlers;
-#ifdef CONFIG_QUOTA
- sb->s_qcop = &ext3_qctl_operations;
- sb->dq_op = &ext3_quota_operations;
- sb->s_quota_types = QTYPE_MASK_USR | QTYPE_MASK_GRP;
-#endif
- memcpy(sb->s_uuid, es->s_uuid, sizeof(es->s_uuid));
- INIT_LIST_HEAD(&sbi->s_orphan); /* unlinked but open files */
- mutex_init(&sbi->s_orphan_lock);
- mutex_init(&sbi->s_resize_lock);
-
- sb->s_root = NULL;
-
- needs_recovery = (es->s_last_orphan != 0 ||
- EXT3_HAS_INCOMPAT_FEATURE(sb,
- EXT3_FEATURE_INCOMPAT_RECOVER));
-
- /*
- * The first inode we look at is the journal inode. Don't try
- * root first: it may be modified in the journal!
- */
- if (!test_opt(sb, NOLOAD) &&
- EXT3_HAS_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL)) {
- if (ext3_load_journal(sb, es, journal_devnum))
- goto failed_mount2;
- } else if (journal_inum) {
- if (ext3_create_journal(sb, es, journal_inum))
- goto failed_mount2;
- } else {
- if (!silent)
- ext3_msg(sb, KERN_ERR,
- "error: no journal found. "
- "mounting ext3 over ext2?");
- goto failed_mount2;
- }
- err = percpu_counter_init(&sbi->s_freeblocks_counter,
- ext3_count_free_blocks(sb), GFP_KERNEL);
- if (!err) {
- err = percpu_counter_init(&sbi->s_freeinodes_counter,
- ext3_count_free_inodes(sb), GFP_KERNEL);
- }
- if (!err) {
- err = percpu_counter_init(&sbi->s_dirs_counter,
- ext3_count_dirs(sb), GFP_KERNEL);
- }
- if (err) {
- ext3_msg(sb, KERN_ERR, "error: insufficient memory");
- ret = err;
- goto failed_mount3;
- }
-
- /* We have now updated the journal if required, so we can
- * validate the data journaling mode. */
- switch (test_opt(sb, DATA_FLAGS)) {
- case 0:
- /* No mode set, assume a default based on the journal
- capabilities: ORDERED_DATA if the journal can
- cope, else JOURNAL_DATA */
- if (journal_check_available_features
- (sbi->s_journal, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE))
- set_opt(sbi->s_mount_opt, DEFAULT_DATA_MODE);
- else
- set_opt(sbi->s_mount_opt, JOURNAL_DATA);
- break;
-
- case EXT3_MOUNT_ORDERED_DATA:
- case EXT3_MOUNT_WRITEBACK_DATA:
- if (!journal_check_available_features
- (sbi->s_journal, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE)) {
- ext3_msg(sb, KERN_ERR,
- "error: journal does not support "
- "requested data journaling mode");
- goto failed_mount3;
- }
- default:
- break;
- }
-
- /*
- * The journal_load will have done any necessary log recovery,
- * so we can safely mount the rest of the filesystem now.
- */
-
- root = ext3_iget(sb, EXT3_ROOT_INO);
- if (IS_ERR(root)) {
- ext3_msg(sb, KERN_ERR, "error: get root inode failed");
- ret = PTR_ERR(root);
- goto failed_mount3;
- }
- if (!S_ISDIR(root->i_mode) || !root->i_blocks || !root->i_size) {
- iput(root);
- ext3_msg(sb, KERN_ERR, "error: corrupt root inode, run e2fsck");
- goto failed_mount3;
- }
- sb->s_root = d_make_root(root);
- if (!sb->s_root) {
- ext3_msg(sb, KERN_ERR, "error: get root dentry failed");
- ret = -ENOMEM;
- goto failed_mount3;
- }
-
- if (ext3_setup_super(sb, es, sb->s_flags & MS_RDONLY))
- sb->s_flags |= MS_RDONLY;
-
- EXT3_SB(sb)->s_mount_state |= EXT3_ORPHAN_FS;
- ext3_orphan_cleanup(sb, es);
- EXT3_SB(sb)->s_mount_state &= ~EXT3_ORPHAN_FS;
- if (needs_recovery) {
- ext3_mark_recovery_complete(sb, es);
- ext3_msg(sb, KERN_INFO, "recovery complete");
- }
- ext3_msg(sb, KERN_INFO, "mounted filesystem with %s data mode",
- test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA ? "journal":
- test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA ? "ordered":
- "writeback");
-
- return 0;
-
-cantfind_ext3:
- if (!silent)
- ext3_msg(sb, KERN_INFO,
- "error: can't find ext3 filesystem on dev %s.",
- sb->s_id);
- goto failed_mount;
-
-failed_mount3:
- percpu_counter_destroy(&sbi->s_freeblocks_counter);
- percpu_counter_destroy(&sbi->s_freeinodes_counter);
- percpu_counter_destroy(&sbi->s_dirs_counter);
- journal_destroy(sbi->s_journal);
-failed_mount2:
- for (i = 0; i < db_count; i++)
- brelse(sbi->s_group_desc[i]);
- kfree(sbi->s_group_desc);
-failed_mount:
-#ifdef CONFIG_QUOTA
- for (i = 0; i < EXT3_MAXQUOTAS; i++)
- kfree(sbi->s_qf_names[i]);
-#endif
- ext3_blkdev_remove(sbi);
- brelse(bh);
-out_fail:
- sb->s_fs_info = NULL;
- kfree(sbi->s_blockgroup_lock);
- kfree(sbi);
- return ret;
-}
-
-/*
- * Setup any per-fs journal parameters now. We'll do this both on
- * initial mount, once the journal has been initialised but before we've
- * done any recovery; and again on any subsequent remount.
- */
-static void ext3_init_journal_params(struct super_block *sb, journal_t *journal)
-{
- struct ext3_sb_info *sbi = EXT3_SB(sb);
-
- if (sbi->s_commit_interval)
- journal->j_commit_interval = sbi->s_commit_interval;
- /* We could also set up an ext3-specific default for the commit
- * interval here, but for now we'll just fall back to the jbd
- * default. */
-
- spin_lock(&journal->j_state_lock);
- if (test_opt(sb, BARRIER))
- journal->j_flags |= JFS_BARRIER;
- else
- journal->j_flags &= ~JFS_BARRIER;
- if (test_opt(sb, DATA_ERR_ABORT))
- journal->j_flags |= JFS_ABORT_ON_SYNCDATA_ERR;
- else
- journal->j_flags &= ~JFS_ABORT_ON_SYNCDATA_ERR;
- spin_unlock(&journal->j_state_lock);
-}
-
-static journal_t *ext3_get_journal(struct super_block *sb,
- unsigned int journal_inum)
-{
- struct inode *journal_inode;
- journal_t *journal;
-
- /* First, test for the existence of a valid inode on disk. Bad
- * things happen if we iget() an unused inode, as the subsequent
- * iput() will try to delete it. */
-
- journal_inode = ext3_iget(sb, journal_inum);
- if (IS_ERR(journal_inode)) {
- ext3_msg(sb, KERN_ERR, "error: no journal found");
- return NULL;
- }
- if (!journal_inode->i_nlink) {
- make_bad_inode(journal_inode);
- iput(journal_inode);
- ext3_msg(sb, KERN_ERR, "error: journal inode is deleted");
- return NULL;
- }
-
- jbd_debug(2, "Journal inode found at %p: %Ld bytes\n",
- journal_inode, journal_inode->i_size);
- if (!S_ISREG(journal_inode->i_mode)) {
- ext3_msg(sb, KERN_ERR, "error: invalid journal inode");
- iput(journal_inode);
- return NULL;
- }
-
- journal = journal_init_inode(journal_inode);
- if (!journal) {
- ext3_msg(sb, KERN_ERR, "error: could not load journal inode");
- iput(journal_inode);
- return NULL;
- }
- journal->j_private = sb;
- ext3_init_journal_params(sb, journal);
- return journal;
-}
-
-static journal_t *ext3_get_dev_journal(struct super_block *sb,
- dev_t j_dev)
-{
- struct buffer_head * bh;
- journal_t *journal;
- ext3_fsblk_t start;
- ext3_fsblk_t len;
- int hblock, blocksize;
- ext3_fsblk_t sb_block;
- unsigned long offset;
- struct ext3_super_block * es;
- struct block_device *bdev;
-
- bdev = ext3_blkdev_get(j_dev, sb);
- if (bdev == NULL)
- return NULL;
-
- blocksize = sb->s_blocksize;
- hblock = bdev_logical_block_size(bdev);
- if (blocksize < hblock) {
- ext3_msg(sb, KERN_ERR,
- "error: blocksize too small for journal device");
- goto out_bdev;
- }
-
- sb_block = EXT3_MIN_BLOCK_SIZE / blocksize;
- offset = EXT3_MIN_BLOCK_SIZE % blocksize;
- set_blocksize(bdev, blocksize);
- if (!(bh = __bread(bdev, sb_block, blocksize))) {
- ext3_msg(sb, KERN_ERR, "error: couldn't read superblock of "
- "external journal");
- goto out_bdev;
- }
-
- es = (struct ext3_super_block *) (bh->b_data + offset);
- if ((le16_to_cpu(es->s_magic) != EXT3_SUPER_MAGIC) ||
- !(le32_to_cpu(es->s_feature_incompat) &
- EXT3_FEATURE_INCOMPAT_JOURNAL_DEV)) {
- ext3_msg(sb, KERN_ERR, "error: external journal has "
- "bad superblock");
- brelse(bh);
- goto out_bdev;
- }
-
- if (memcmp(EXT3_SB(sb)->s_es->s_journal_uuid, es->s_uuid, 16)) {
- ext3_msg(sb, KERN_ERR, "error: journal UUID does not match");
- brelse(bh);
- goto out_bdev;
- }
-
- len = le32_to_cpu(es->s_blocks_count);
- start = sb_block + 1;
- brelse(bh); /* we're done with the superblock */
-
- journal = journal_init_dev(bdev, sb->s_bdev,
- start, len, blocksize);
- if (!journal) {
- ext3_msg(sb, KERN_ERR,
- "error: failed to create device journal");
- goto out_bdev;
- }
- journal->j_private = sb;
- if (!bh_uptodate_or_lock(journal->j_sb_buffer)) {
- if (bh_submit_read(journal->j_sb_buffer)) {
- ext3_msg(sb, KERN_ERR, "I/O error on journal device");
- goto out_journal;
- }
- }
- if (be32_to_cpu(journal->j_superblock->s_nr_users) != 1) {
- ext3_msg(sb, KERN_ERR,
- "error: external journal has more than one "
- "user (unsupported) - %d",
- be32_to_cpu(journal->j_superblock->s_nr_users));
- goto out_journal;
- }
- EXT3_SB(sb)->journal_bdev = bdev;
- ext3_init_journal_params(sb, journal);
- return journal;
-out_journal:
- journal_destroy(journal);
-out_bdev:
- ext3_blkdev_put(bdev);
- return NULL;
-}
-
-static int ext3_load_journal(struct super_block *sb,
- struct ext3_super_block *es,
- unsigned long journal_devnum)
-{
- journal_t *journal;
- unsigned int journal_inum = le32_to_cpu(es->s_journal_inum);
- dev_t journal_dev;
- int err = 0;
- int really_read_only;
-
- if (journal_devnum &&
- journal_devnum != le32_to_cpu(es->s_journal_dev)) {
- ext3_msg(sb, KERN_INFO, "external journal device major/minor "
- "numbers have changed");
- journal_dev = new_decode_dev(journal_devnum);
- } else
- journal_dev = new_decode_dev(le32_to_cpu(es->s_journal_dev));
-
- really_read_only = bdev_read_only(sb->s_bdev);
-
- /*
- * Are we loading a blank journal or performing recovery after a
- * crash? For recovery, we need to check in advance whether we
- * can get read-write access to the device.
- */
-
- if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER)) {
- if (sb->s_flags & MS_RDONLY) {
- ext3_msg(sb, KERN_INFO,
- "recovery required on readonly filesystem");
- if (really_read_only) {
- ext3_msg(sb, KERN_ERR, "error: write access "
- "unavailable, cannot proceed");
- return -EROFS;
- }
- ext3_msg(sb, KERN_INFO,
- "write access will be enabled during recovery");
- }
- }
-
- if (journal_inum && journal_dev) {
- ext3_msg(sb, KERN_ERR, "error: filesystem has both journal "
- "and inode journals");
- return -EINVAL;
- }
-
- if (journal_inum) {
- if (!(journal = ext3_get_journal(sb, journal_inum)))
- return -EINVAL;
- } else {
- if (!(journal = ext3_get_dev_journal(sb, journal_dev)))
- return -EINVAL;
- }
-
- if (!(journal->j_flags & JFS_BARRIER))
- printk(KERN_INFO "EXT3-fs: barriers not enabled\n");
-
- if (!really_read_only && test_opt(sb, UPDATE_JOURNAL)) {
- err = journal_update_format(journal);
- if (err) {
- ext3_msg(sb, KERN_ERR, "error updating journal");
- journal_destroy(journal);
- return err;
- }
- }
-
- if (!EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER))
- err = journal_wipe(journal, !really_read_only);
- if (!err)
- err = journal_load(journal);
-
- if (err) {
- ext3_msg(sb, KERN_ERR, "error loading journal");
- journal_destroy(journal);
- return err;
- }
-
- EXT3_SB(sb)->s_journal = journal;
- ext3_clear_journal_err(sb, es);
-
- if (!really_read_only && journal_devnum &&
- journal_devnum != le32_to_cpu(es->s_journal_dev)) {
- es->s_journal_dev = cpu_to_le32(journal_devnum);
-
- /* Make sure we flush the recovery flag to disk. */
- ext3_commit_super(sb, es, 1);
- }
-
- return 0;
-}
-
-static int ext3_create_journal(struct super_block *sb,
- struct ext3_super_block *es,
- unsigned int journal_inum)
-{
- journal_t *journal;
- int err;
-
- if (sb->s_flags & MS_RDONLY) {
- ext3_msg(sb, KERN_ERR,
- "error: readonly filesystem when trying to "
- "create journal");
- return -EROFS;
- }
-
- journal = ext3_get_journal(sb, journal_inum);
- if (!journal)
- return -EINVAL;
-
- ext3_msg(sb, KERN_INFO, "creating new journal on inode %u",
- journal_inum);
-
- err = journal_create(journal);
- if (err) {
- ext3_msg(sb, KERN_ERR, "error creating journal");
- journal_destroy(journal);
- return -EIO;
- }
-
- EXT3_SB(sb)->s_journal = journal;
-
- ext3_update_dynamic_rev(sb);
- EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
- EXT3_SET_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL);
-
- es->s_journal_inum = cpu_to_le32(journal_inum);
-
- /* Make sure we flush the recovery flag to disk. */
- ext3_commit_super(sb, es, 1);
-
- return 0;
-}
-
-static int ext3_commit_super(struct super_block *sb,
- struct ext3_super_block *es,
- int sync)
-{
- struct buffer_head *sbh = EXT3_SB(sb)->s_sbh;
- int error = 0;
-
- if (!sbh)
- return error;
-
- if (buffer_write_io_error(sbh)) {
- /*
- * Oh, dear. A previous attempt to write the
- * superblock failed. This could happen because the
- * USB device was yanked out. Or it could happen to
- * be a transient write error and maybe the block will
- * be remapped. Nothing we can do but to retry the
- * write and hope for the best.
- */
- ext3_msg(sb, KERN_ERR, "previous I/O error to "
- "superblock detected");
- clear_buffer_write_io_error(sbh);
- set_buffer_uptodate(sbh);
- }
- /*
- * If the file system is mounted read-only, don't update the
- * superblock write time. This avoids updating the superblock
- * write time when we are mounting the root file system
- * read/only but we need to replay the journal; at that point,
- * for people who are east of GMT and who make their clock
- * tick in localtime for Windows bug-for-bug compatibility,
- * the clock is set in the future, and this will cause e2fsck
- * to complain and force a full file system check.
- */
- if (!(sb->s_flags & MS_RDONLY))
- es->s_wtime = cpu_to_le32(get_seconds());
- es->s_free_blocks_count = cpu_to_le32(ext3_count_free_blocks(sb));
- es->s_free_inodes_count = cpu_to_le32(ext3_count_free_inodes(sb));
- BUFFER_TRACE(sbh, "marking dirty");
- mark_buffer_dirty(sbh);
- if (sync) {
- error = sync_dirty_buffer(sbh);
- if (buffer_write_io_error(sbh)) {
- ext3_msg(sb, KERN_ERR, "I/O error while writing "
- "superblock");
- clear_buffer_write_io_error(sbh);
- set_buffer_uptodate(sbh);
- }
- }
- return error;
-}
-
-
-/*
- * Have we just finished recovery? If so, and if we are mounting (or
- * remounting) the filesystem readonly, then we will end up with a
- * consistent fs on disk. Record that fact.
- */
-static void ext3_mark_recovery_complete(struct super_block * sb,
- struct ext3_super_block * es)
-{
- journal_t *journal = EXT3_SB(sb)->s_journal;
-
- journal_lock_updates(journal);
- if (journal_flush(journal) < 0)
- goto out;
-
- if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER) &&
- sb->s_flags & MS_RDONLY) {
- EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
- ext3_commit_super(sb, es, 1);
- }
-
-out:
- journal_unlock_updates(journal);
-}
-
-/*
- * If we are mounting (or read-write remounting) a filesystem whose journal
- * has recorded an error from a previous lifetime, move that error to the
- * main filesystem now.
- */
-static void ext3_clear_journal_err(struct super_block *sb,
- struct ext3_super_block *es)
-{
- journal_t *journal;
- int j_errno;
- const char *errstr;
-
- journal = EXT3_SB(sb)->s_journal;
-
- /*
- * Now check for any error status which may have been recorded in the
- * journal by a prior ext3_error() or ext3_abort()
- */
-
- j_errno = journal_errno(journal);
- if (j_errno) {
- char nbuf[16];
-
- errstr = ext3_decode_error(sb, j_errno, nbuf);
- ext3_warning(sb, __func__, "Filesystem error recorded "
- "from previous mount: %s", errstr);
- ext3_warning(sb, __func__, "Marking fs in need of "
- "filesystem check.");
-
- EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS;
- es->s_state |= cpu_to_le16(EXT3_ERROR_FS);
- ext3_commit_super (sb, es, 1);
-
- journal_clear_err(journal);
- }
-}
-
-/*
- * Force the running and committing transactions to commit,
- * and wait on the commit.
- */
-int ext3_force_commit(struct super_block *sb)
-{
- journal_t *journal;
- int ret;
-
- if (sb->s_flags & MS_RDONLY)
- return 0;
-
- journal = EXT3_SB(sb)->s_journal;
- ret = ext3_journal_force_commit(journal);
- return ret;
-}
-
-static int ext3_sync_fs(struct super_block *sb, int wait)
-{
- tid_t target;
-
- trace_ext3_sync_fs(sb, wait);
- /*
- * Writeback quota in non-journalled quota case - journalled quota has
- * no dirty dquots
- */
- dquot_writeback_dquots(sb, -1);
- if (journal_start_commit(EXT3_SB(sb)->s_journal, &target)) {
- if (wait)
- log_wait_commit(EXT3_SB(sb)->s_journal, target);
- }
- return 0;
-}
-
-/*
- * LVM calls this function before a (read-only) snapshot is created. This
- * gives us a chance to flush the journal completely and mark the fs clean.
- */
-static int ext3_freeze(struct super_block *sb)
-{
- int error = 0;
- journal_t *journal;
-
- if (!(sb->s_flags & MS_RDONLY)) {
- journal = EXT3_SB(sb)->s_journal;
-
- /* Now we set up the journal barrier. */
- journal_lock_updates(journal);
-
- /*
- * We don't want to clear needs_recovery flag when we failed
- * to flush the journal.
- */
- error = journal_flush(journal);
- if (error < 0)
- goto out;
-
- /* Journal blocked and flushed, clear needs_recovery flag. */
- EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
- error = ext3_commit_super(sb, EXT3_SB(sb)->s_es, 1);
- if (error)
- goto out;
- }
- return 0;
-
-out:
- journal_unlock_updates(journal);
- return error;
-}
-
-/*
- * Called by LVM after the snapshot is done. We need to reset the RECOVER
- * flag here, even though the filesystem is not technically dirty yet.
- */
-static int ext3_unfreeze(struct super_block *sb)
-{
- if (!(sb->s_flags & MS_RDONLY)) {
- /* Reser the needs_recovery flag before the fs is unlocked. */
- EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
- ext3_commit_super(sb, EXT3_SB(sb)->s_es, 1);
- journal_unlock_updates(EXT3_SB(sb)->s_journal);
- }
- return 0;
-}
-
-static int ext3_remount (struct super_block * sb, int * flags, char * data)
-{
- struct ext3_super_block * es;
- struct ext3_sb_info *sbi = EXT3_SB(sb);
- ext3_fsblk_t n_blocks_count = 0;
- unsigned long old_sb_flags;
- struct ext3_mount_options old_opts;
- int enable_quota = 0;
- int err;
-#ifdef CONFIG_QUOTA
- int i;
-#endif
-
- sync_filesystem(sb);
-
- /* Store the original options */
- old_sb_flags = sb->s_flags;
- old_opts.s_mount_opt = sbi->s_mount_opt;
- old_opts.s_resuid = sbi->s_resuid;
- old_opts.s_resgid = sbi->s_resgid;
- old_opts.s_commit_interval = sbi->s_commit_interval;
-#ifdef CONFIG_QUOTA
- old_opts.s_jquota_fmt = sbi->s_jquota_fmt;
- for (i = 0; i < EXT3_MAXQUOTAS; i++)
- if (sbi->s_qf_names[i]) {
- old_opts.s_qf_names[i] = kstrdup(sbi->s_qf_names[i],
- GFP_KERNEL);
- if (!old_opts.s_qf_names[i]) {
- int j;
-
- for (j = 0; j < i; j++)
- kfree(old_opts.s_qf_names[j]);
- return -ENOMEM;
- }
- } else
- old_opts.s_qf_names[i] = NULL;
-#endif
-
- /*
- * Allow the "check" option to be passed as a remount option.
- */
- if (!parse_options(data, sb, NULL, NULL, &n_blocks_count, 1)) {
- err = -EINVAL;
- goto restore_opts;
- }
-
- if (test_opt(sb, ABORT))
- ext3_abort(sb, __func__, "Abort forced by user");
-
- sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
- (test_opt(sb, POSIX_ACL) ? MS_POSIXACL : 0);
-
- es = sbi->s_es;
-
- ext3_init_journal_params(sb, sbi->s_journal);
-
- if ((*flags & MS_RDONLY) != (sb->s_flags & MS_RDONLY) ||
- n_blocks_count > le32_to_cpu(es->s_blocks_count)) {
- if (test_opt(sb, ABORT)) {
- err = -EROFS;
- goto restore_opts;
- }
-
- if (*flags & MS_RDONLY) {
- err = dquot_suspend(sb, -1);
- if (err < 0)
- goto restore_opts;
-
- /*
- * First of all, the unconditional stuff we have to do
- * to disable replay of the journal when we next remount
- */
- sb->s_flags |= MS_RDONLY;
-
- /*
- * OK, test if we are remounting a valid rw partition
- * readonly, and if so set the rdonly flag and then
- * mark the partition as valid again.
- */
- if (!(es->s_state & cpu_to_le16(EXT3_VALID_FS)) &&
- (sbi->s_mount_state & EXT3_VALID_FS))
- es->s_state = cpu_to_le16(sbi->s_mount_state);
-
- ext3_mark_recovery_complete(sb, es);
- } else {
- __le32 ret;
- if ((ret = EXT3_HAS_RO_COMPAT_FEATURE(sb,
- ~EXT3_FEATURE_RO_COMPAT_SUPP))) {
- ext3_msg(sb, KERN_WARNING,
- "warning: couldn't remount RDWR "
- "because of unsupported optional "
- "features (%x)", le32_to_cpu(ret));
- err = -EROFS;
- goto restore_opts;
- }
-
- /*
- * If we have an unprocessed orphan list hanging
- * around from a previously readonly bdev mount,
- * require a full umount & mount for now.
- */
- if (es->s_last_orphan) {
- ext3_msg(sb, KERN_WARNING, "warning: couldn't "
- "remount RDWR because of unprocessed "
- "orphan inode list. Please "
- "umount & mount instead.");
- err = -EINVAL;
- goto restore_opts;
- }
-
- /*
- * Mounting a RDONLY partition read-write, so reread
- * and store the current valid flag. (It may have
- * been changed by e2fsck since we originally mounted
- * the partition.)
- */
- ext3_clear_journal_err(sb, es);
- sbi->s_mount_state = le16_to_cpu(es->s_state);
- if ((err = ext3_group_extend(sb, es, n_blocks_count)))
- goto restore_opts;
- if (!ext3_setup_super (sb, es, 0))
- sb->s_flags &= ~MS_RDONLY;
- enable_quota = 1;
- }
- }
-#ifdef CONFIG_QUOTA
- /* Release old quota file names */
- for (i = 0; i < EXT3_MAXQUOTAS; i++)
- kfree(old_opts.s_qf_names[i]);
-#endif
- if (enable_quota)
- dquot_resume(sb, -1);
- return 0;
-restore_opts:
- sb->s_flags = old_sb_flags;
- sbi->s_mount_opt = old_opts.s_mount_opt;
- sbi->s_resuid = old_opts.s_resuid;
- sbi->s_resgid = old_opts.s_resgid;
- sbi->s_commit_interval = old_opts.s_commit_interval;
-#ifdef CONFIG_QUOTA
- sbi->s_jquota_fmt = old_opts.s_jquota_fmt;
- for (i = 0; i < EXT3_MAXQUOTAS; i++) {
- kfree(sbi->s_qf_names[i]);
- sbi->s_qf_names[i] = old_opts.s_qf_names[i];
- }
-#endif
- return err;
-}
-
-static int ext3_statfs (struct dentry * dentry, struct kstatfs * buf)
-{
- struct super_block *sb = dentry->d_sb;
- struct ext3_sb_info *sbi = EXT3_SB(sb);
- struct ext3_super_block *es = sbi->s_es;
- u64 fsid;
-
- if (test_opt(sb, MINIX_DF)) {
- sbi->s_overhead_last = 0;
- } else if (sbi->s_blocks_last != le32_to_cpu(es->s_blocks_count)) {
- unsigned long ngroups = sbi->s_groups_count, i;
- ext3_fsblk_t overhead = 0;
- smp_rmb();
-
- /*
- * Compute the overhead (FS structures). This is constant
- * for a given filesystem unless the number of block groups
- * changes so we cache the previous value until it does.
- */
-
- /*
- * All of the blocks before first_data_block are
- * overhead
- */
- overhead = le32_to_cpu(es->s_first_data_block);
-
- /*
- * Add the overhead attributed to the superblock and
- * block group descriptors. If the sparse superblocks
- * feature is turned on, then not all groups have this.
- */
- for (i = 0; i < ngroups; i++) {
- overhead += ext3_bg_has_super(sb, i) +
- ext3_bg_num_gdb(sb, i);
- cond_resched();
- }
-
- /*
- * Every block group has an inode bitmap, a block
- * bitmap, and an inode table.
- */
- overhead += ngroups * (2 + sbi->s_itb_per_group);
-
- /* Add the internal journal blocks as well */
- if (sbi->s_journal && !sbi->journal_bdev)
- overhead += sbi->s_journal->j_maxlen;
-
- sbi->s_overhead_last = overhead;
- smp_wmb();
- sbi->s_blocks_last = le32_to_cpu(es->s_blocks_count);
- }
-
- buf->f_type = EXT3_SUPER_MAGIC;
- buf->f_bsize = sb->s_blocksize;
- buf->f_blocks = le32_to_cpu(es->s_blocks_count) - sbi->s_overhead_last;
- buf->f_bfree = percpu_counter_sum_positive(&sbi->s_freeblocks_counter);
- buf->f_bavail = buf->f_bfree - le32_to_cpu(es->s_r_blocks_count);
- if (buf->f_bfree < le32_to_cpu(es->s_r_blocks_count))
- buf->f_bavail = 0;
- buf->f_files = le32_to_cpu(es->s_inodes_count);
- buf->f_ffree = percpu_counter_sum_positive(&sbi->s_freeinodes_counter);
- buf->f_namelen = EXT3_NAME_LEN;
- fsid = le64_to_cpup((void *)es->s_uuid) ^
- le64_to_cpup((void *)es->s_uuid + sizeof(u64));
- buf->f_fsid.val[0] = fsid & 0xFFFFFFFFUL;
- buf->f_fsid.val[1] = (fsid >> 32) & 0xFFFFFFFFUL;
- return 0;
-}
-
-/* Helper function for writing quotas on sync - we need to start transaction before quota file
- * is locked for write. Otherwise the are possible deadlocks:
- * Process 1 Process 2
- * ext3_create() quota_sync()
- * journal_start() write_dquot()
- * dquot_initialize() down(dqio_mutex)
- * down(dqio_mutex) journal_start()
- *
- */
-
-#ifdef CONFIG_QUOTA
-
-static inline struct inode *dquot_to_inode(struct dquot *dquot)
-{
- return sb_dqopt(dquot->dq_sb)->files[dquot->dq_id.type];
-}
-
-static int ext3_write_dquot(struct dquot *dquot)
-{
- int ret, err;
- handle_t *handle;
- struct inode *inode;
-
- inode = dquot_to_inode(dquot);
- handle = ext3_journal_start(inode,
- EXT3_QUOTA_TRANS_BLOCKS(dquot->dq_sb));
- if (IS_ERR(handle))
- return PTR_ERR(handle);
- ret = dquot_commit(dquot);
- err = ext3_journal_stop(handle);
- if (!ret)
- ret = err;
- return ret;
-}
-
-static int ext3_acquire_dquot(struct dquot *dquot)
-{
- int ret, err;
- handle_t *handle;
-
- handle = ext3_journal_start(dquot_to_inode(dquot),
- EXT3_QUOTA_INIT_BLOCKS(dquot->dq_sb));
- if (IS_ERR(handle))
- return PTR_ERR(handle);
- ret = dquot_acquire(dquot);
- err = ext3_journal_stop(handle);
- if (!ret)
- ret = err;
- return ret;
-}
-
-static int ext3_release_dquot(struct dquot *dquot)
-{
- int ret, err;
- handle_t *handle;
-
- handle = ext3_journal_start(dquot_to_inode(dquot),
- EXT3_QUOTA_DEL_BLOCKS(dquot->dq_sb));
- if (IS_ERR(handle)) {
- /* Release dquot anyway to avoid endless cycle in dqput() */
- dquot_release(dquot);
- return PTR_ERR(handle);
- }
- ret = dquot_release(dquot);
- err = ext3_journal_stop(handle);
- if (!ret)
- ret = err;
- return ret;
-}
-
-static int ext3_mark_dquot_dirty(struct dquot *dquot)
-{
- /* Are we journaling quotas? */
- if (EXT3_SB(dquot->dq_sb)->s_qf_names[USRQUOTA] ||
- EXT3_SB(dquot->dq_sb)->s_qf_names[GRPQUOTA]) {
- dquot_mark_dquot_dirty(dquot);
- return ext3_write_dquot(dquot);
- } else {
- return dquot_mark_dquot_dirty(dquot);
- }
-}
-
-static int ext3_write_info(struct super_block *sb, int type)
-{
- int ret, err;
- handle_t *handle;
-
- /* Data block + inode block */
- handle = ext3_journal_start(d_inode(sb->s_root), 2);
- if (IS_ERR(handle))
- return PTR_ERR(handle);
- ret = dquot_commit_info(sb, type);
- err = ext3_journal_stop(handle);
- if (!ret)
- ret = err;
- return ret;
-}
-
-/*
- * Turn on quotas during mount time - we need to find
- * the quota file and such...
- */
-static int ext3_quota_on_mount(struct super_block *sb, int type)
-{
- return dquot_quota_on_mount(sb, EXT3_SB(sb)->s_qf_names[type],
- EXT3_SB(sb)->s_jquota_fmt, type);
-}
-
-/*
- * Standard function to be called on quota_on
- */
-static int ext3_quota_on(struct super_block *sb, int type, int format_id,
- struct path *path)
-{
- int err;
-
- if (!test_opt(sb, QUOTA))
- return -EINVAL;
-
- /* Quotafile not on the same filesystem? */
- if (path->dentry->d_sb != sb)
- return -EXDEV;
- /* Journaling quota? */
- if (EXT3_SB(sb)->s_qf_names[type]) {
- /* Quotafile not of fs root? */
- if (path->dentry->d_parent != sb->s_root)
- ext3_msg(sb, KERN_WARNING,
- "warning: Quota file not on filesystem root. "
- "Journaled quota will not work.");
- }
-
- /*
- * When we journal data on quota file, we have to flush journal to see
- * all updates to the file when we bypass pagecache...
- */
- if (ext3_should_journal_data(d_inode(path->dentry))) {
- /*
- * We don't need to lock updates but journal_flush() could
- * otherwise be livelocked...
- */
- journal_lock_updates(EXT3_SB(sb)->s_journal);
- err = journal_flush(EXT3_SB(sb)->s_journal);
- journal_unlock_updates(EXT3_SB(sb)->s_journal);
- if (err)
- return err;
- }
-
- return dquot_quota_on(sb, type, format_id, path);
-}
-
-/* Read data from quotafile - avoid pagecache and such because we cannot afford
- * acquiring the locks... As quota files are never truncated and quota code
- * itself serializes the operations (and no one else should touch the files)
- * we don't have to be afraid of races */
-static ssize_t ext3_quota_read(struct super_block *sb, int type, char *data,
- size_t len, loff_t off)
-{
- struct inode *inode = sb_dqopt(sb)->files[type];
- sector_t blk = off >> EXT3_BLOCK_SIZE_BITS(sb);
- int err = 0;
- int offset = off & (sb->s_blocksize - 1);
- int tocopy;
- size_t toread;
- struct buffer_head *bh;
- loff_t i_size = i_size_read(inode);
-
- if (off > i_size)
- return 0;
- if (off+len > i_size)
- len = i_size-off;
- toread = len;
- while (toread > 0) {
- tocopy = sb->s_blocksize - offset < toread ?
- sb->s_blocksize - offset : toread;
- bh = ext3_bread(NULL, inode, blk, 0, &err);
- if (err)
- return err;
- if (!bh) /* A hole? */
- memset(data, 0, tocopy);
- else
- memcpy(data, bh->b_data+offset, tocopy);
- brelse(bh);
- offset = 0;
- toread -= tocopy;
- data += tocopy;
- blk++;
- }
- return len;
-}
-
-/* Write to quotafile (we know the transaction is already started and has
- * enough credits) */
-static ssize_t ext3_quota_write(struct super_block *sb, int type,
- const char *data, size_t len, loff_t off)
-{
- struct inode *inode = sb_dqopt(sb)->files[type];
- sector_t blk = off >> EXT3_BLOCK_SIZE_BITS(sb);
- int err = 0;
- int offset = off & (sb->s_blocksize - 1);
- int journal_quota = EXT3_SB(sb)->s_qf_names[type] != NULL;
- struct buffer_head *bh;
- handle_t *handle = journal_current_handle();
-
- if (!handle) {
- ext3_msg(sb, KERN_WARNING,
- "warning: quota write (off=%llu, len=%llu)"
- " cancelled because transaction is not started.",
- (unsigned long long)off, (unsigned long long)len);
- return -EIO;
- }
-
- /*
- * Since we account only one data block in transaction credits,
- * then it is impossible to cross a block boundary.
- */
- if (sb->s_blocksize - offset < len) {
- ext3_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)"
- " cancelled because not block aligned",
- (unsigned long long)off, (unsigned long long)len);
- return -EIO;
- }
- bh = ext3_bread(handle, inode, blk, 1, &err);
- if (!bh)
- goto out;
- if (journal_quota) {
- err = ext3_journal_get_write_access(handle, bh);
- if (err) {
- brelse(bh);
- goto out;
- }
- }
- lock_buffer(bh);
- memcpy(bh->b_data+offset, data, len);
- flush_dcache_page(bh->b_page);
- unlock_buffer(bh);
- if (journal_quota)
- err = ext3_journal_dirty_metadata(handle, bh);
- else {
- /* Always do at least ordered writes for quotas */
- err = ext3_journal_dirty_data(handle, bh);
- mark_buffer_dirty(bh);
- }
- brelse(bh);
-out:
- if (err)
- return err;
- if (inode->i_size < off + len) {
- i_size_write(inode, off + len);
- EXT3_I(inode)->i_disksize = inode->i_size;
- }
- inode->i_version++;
- inode->i_mtime = inode->i_ctime = CURRENT_TIME;
- ext3_mark_inode_dirty(handle, inode);
- return len;
-}
-
-#endif
-
-static struct dentry *ext3_mount(struct file_system_type *fs_type,
- int flags, const char *dev_name, void *data)
-{
- return mount_bdev(fs_type, flags, dev_name, data, ext3_fill_super);
-}
-
-static struct file_system_type ext3_fs_type = {
- .owner = THIS_MODULE,
- .name = "ext3",
- .mount = ext3_mount,
- .kill_sb = kill_block_super,
- .fs_flags = FS_REQUIRES_DEV,
-};
-MODULE_ALIAS_FS("ext3");
-
-static int __init init_ext3_fs(void)
-{
- int err = init_ext3_xattr();
- if (err)
- return err;
- err = init_inodecache();
- if (err)
- goto out1;
- err = register_filesystem(&ext3_fs_type);
- if (err)
- goto out;
- return 0;
-out:
- destroy_inodecache();
-out1:
- exit_ext3_xattr();
- return err;
-}
-
-static void __exit exit_ext3_fs(void)
-{
- unregister_filesystem(&ext3_fs_type);
- destroy_inodecache();
- exit_ext3_xattr();
-}
-
-MODULE_AUTHOR("Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others");
-MODULE_DESCRIPTION("Second Extended Filesystem with journaling extensions");
-MODULE_LICENSE("GPL");
-module_init(init_ext3_fs)
-module_exit(exit_ext3_fs)