ext4: add DAX functionality

This is a port of the DAX functionality found in the current version of
ext2.

[matthew.r.wilcox@intel.com: heavily tweaked]
[akpm@linux-foundation.org: remap_pages went away]
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 38 insertions, 1 deletions

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 64c39c7c594f..10e8c6b7ca08 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1124,7 +1124,7 @@ enum {
 	Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota,
 	Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_jqfmt_vfsv1, Opt_quota,
 	Opt_noquota, Opt_barrier, Opt_nobarrier, Opt_err,
-	Opt_usrquota, Opt_grpquota, Opt_i_version,
+	Opt_usrquota, Opt_grpquota, Opt_i_version, Opt_dax,
 	Opt_stripe, Opt_delalloc, Opt_nodelalloc, Opt_mblk_io_submit,
 	Opt_nomblk_io_submit, Opt_block_validity, Opt_noblock_validity,
 	Opt_inode_readahead_blks, Opt_journal_ioprio,
@@ -1187,6 +1187,7 @@ static const match_table_t tokens = {
 	{Opt_barrier, "barrier"},
 	{Opt_nobarrier, "nobarrier"},
 	{Opt_i_version, "i_version"},
+	{Opt_dax, "dax"},
 	{Opt_stripe, "stripe=%u"},
 	{Opt_delalloc, "delalloc"},
 	{Opt_nodelalloc, "nodelalloc"},
@@ -1371,6 +1372,7 @@ static const struct mount_opts {
 	{Opt_min_batch_time, 0, MOPT_GTE0},
 	{Opt_inode_readahead_blks, 0, MOPT_GTE0},
 	{Opt_init_itable, 0, MOPT_GTE0},
+	{Opt_dax, EXT4_MOUNT_DAX, MOPT_SET},
 	{Opt_stripe, 0, MOPT_GTE0},
 	{Opt_resuid, 0, MOPT_GTE0},
 	{Opt_resgid, 0, MOPT_GTE0},
@@ -1607,6 +1609,11 @@ static int handle_mount_opt(struct super_block *sb, char *opt, int token,
 		}
 		sbi->s_jquota_fmt = m->mount_opt;
 #endif
+#ifndef CONFIG_FS_DAX
+	} else if (token == Opt_dax) {
+		ext4_msg(sb, KERN_INFO, "dax option not supported");
+		return -1;
+#endif
 	} else {
 		if (!args->from)
 			arg = 1;
@@ -3589,6 +3596,11 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 				 "both data=journal and dioread_nolock");
 			goto failed_mount;
 		}
+		if (test_opt(sb, DAX)) {
+			ext4_msg(sb, KERN_ERR, "can't mount with "
+				 "both data=journal and dax");
+			goto failed_mount;
+		}
 		if (test_opt(sb, DELALLOC))
 			clear_opt(sb, DELALLOC);
 	}
@@ -3652,6 +3664,19 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 		goto failed_mount;
 	}
 
+	if (sbi->s_mount_opt & EXT4_MOUNT_DAX) {
+		if (blocksize != PAGE_SIZE) {
+			ext4_msg(sb, KERN_ERR,
+					"error: unsupported blocksize for dax");
+			goto failed_mount;
+		}
+		if (!sb->s_bdev->bd_disk->fops->direct_access) {
+			ext4_msg(sb, KERN_ERR,
+					"error: device does not support dax");
+			goto failed_mount;
+		}
+	}
+
 	if (sb->s_blocksize != blocksize) {
 		/* Validate the filesystem blocksize */
 		if (!sb_set_blocksize(sb, blocksize)) {
@@ -4869,6 +4894,18 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 			err = -EINVAL;
 			goto restore_opts;
 		}
+		if (test_opt(sb, DAX)) {
+			ext4_msg(sb, KERN_ERR, "can't mount with "
+				 "both data=journal and dax");
+			err = -EINVAL;
+			goto restore_opts;
+		}
+	}
+
+	if ((sbi->s_mount_opt ^ old_opts.s_mount_opt) & EXT4_MOUNT_DAX) {
+		ext4_msg(sb, KERN_WARNING, "warning: refusing change of "
+			"dax flag with busy inodes while remounting");
+		sbi->s_mount_opt ^= EXT4_MOUNT_DAX;
 	}
 
 	if (sbi->s_mount_flags & EXT4_MF_FS_ABORTED)