aboutsummaryrefslogtreecommitdiffstats
path: root/fs
diff options
context:
space:
mode:
authornpiggin@suse.de <npiggin@suse.de>2010-05-27 01:05:34 +1000
committerAl Viro <viro@zeniv.linux.org.uk>2010-05-27 22:15:42 -0400
commit15c6fd9786dfaab43547bf60df6fa63170fb64fc (patch)
treeafd997b3402761e28b6c39f414fbd93c69fdcdce /fs
parentfs: introduce new truncate sequence (diff)
downloadlinux-dev-15c6fd9786dfaab43547bf60df6fa63170fb64fc.tar.xz
linux-dev-15c6fd9786dfaab43547bf60df6fa63170fb64fc.zip
kill spurious reference to vmtruncate
Lots of filesystems calls vmtruncate despite not implementing the old ->truncate method. Switch them to use simple_setsize and add some comments about the truncate code where it seems fitting. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Diffstat (limited to 'fs')
-rw-r--r--fs/adfs/inode.c3
-rw-r--r--fs/ecryptfs/inode.c4
-rw-r--r--fs/gfs2/aops.c8
-rw-r--r--fs/gfs2/ops_inode.c5
-rw-r--r--fs/jffs2/fs.c4
-rw-r--r--fs/ocfs2/file.c8
-rw-r--r--fs/smbfs/inode.c2
-rw-r--r--fs/ubifs/file.c13
-rw-r--r--fs/ubifs/ubifs.h2
-rw-r--r--fs/ufs/truncate.c10
10 files changed, 37 insertions, 22 deletions
diff --git a/fs/adfs/inode.c b/fs/adfs/inode.c
index 0f5e30978135..6f850b06ab62 100644
--- a/fs/adfs/inode.c
+++ b/fs/adfs/inode.c
@@ -322,8 +322,9 @@ adfs_notify_change(struct dentry *dentry, struct iattr *attr)
if (error)
goto out;
+ /* XXX: this is missing some actual on-disk truncation.. */
if (ia_valid & ATTR_SIZE)
- error = vmtruncate(inode, attr->ia_size);
+ error = simple_setsize(inode, attr->ia_size);
if (error)
goto out;
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 65dee2f336ae..31ef5252f0fe 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -805,7 +805,7 @@ static int truncate_upper(struct dentry *dentry, struct iattr *ia,
- (ia->ia_size & ~PAGE_CACHE_MASK));
if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
- rc = vmtruncate(inode, ia->ia_size);
+ rc = simple_setsize(inode, ia->ia_size);
if (rc)
goto out;
lower_ia->ia_size = ia->ia_size;
@@ -830,7 +830,7 @@ static int truncate_upper(struct dentry *dentry, struct iattr *ia,
goto out;
}
}
- vmtruncate(inode, ia->ia_size);
+ simple_setsize(inode, ia->ia_size);
rc = ecryptfs_write_inode_size_to_metadata(inode);
if (rc) {
printk(KERN_ERR "Problem with "
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index a739a0a48067..9f8b52500d63 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -700,8 +700,14 @@ out:
return 0;
page_cache_release(page);
+
+ /*
+ * XXX(hch): the call below should probably be replaced with
+ * a call to the gfs2-specific truncate blocks helper to actually
+ * release disk blocks..
+ */
if (pos + len > ip->i_inode.i_size)
- vmtruncate(&ip->i_inode, ip->i_inode.i_size);
+ simple_setsize(&ip->i_inode, ip->i_inode.i_size);
out_endtrans:
gfs2_trans_end(sdp);
out_trans_fail:
diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c
index 4e64352d49de..98cdd05f3316 100644
--- a/fs/gfs2/ops_inode.c
+++ b/fs/gfs2/ops_inode.c
@@ -1071,6 +1071,9 @@ int gfs2_permission(struct inode *inode, int mask)
return error;
}
+/*
+ * XXX: should be changed to have proper ordering by opencoding simple_setsize
+ */
static int setattr_size(struct inode *inode, struct iattr *attr)
{
struct gfs2_inode *ip = GFS2_I(inode);
@@ -1081,7 +1084,7 @@ static int setattr_size(struct inode *inode, struct iattr *attr)
error = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
if (error)
return error;
- error = vmtruncate(inode, attr->ia_size);
+ error = simple_setsize(inode, attr->ia_size);
gfs2_trans_end(sdp);
if (error)
return error;
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 86e0821fc989..8bc2c80ab159 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -169,13 +169,13 @@ int jffs2_do_setattr (struct inode *inode, struct iattr *iattr)
mutex_unlock(&f->sem);
jffs2_complete_reservation(c);
- /* We have to do the vmtruncate() without f->sem held, since
+ /* We have to do the simple_setsize() without f->sem held, since
some pages may be locked and waiting for it in readpage().
We are protected from a simultaneous write() extending i_size
back past iattr->ia_size, because do_truncate() holds the
generic inode semaphore. */
if (ivalid & ATTR_SIZE && inode->i_size > iattr->ia_size) {
- vmtruncate(inode, iattr->ia_size);
+ simple_setsize(inode, iattr->ia_size);
inode->i_blocks = (inode->i_size + 511) >> 9;
}
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 1c6220a8e072..6a13ea64c447 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1052,7 +1052,7 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
}
/*
- * This will intentionally not wind up calling vmtruncate(),
+ * This will intentionally not wind up calling simple_setsize(),
* since all the work for a size change has been done above.
* Otherwise, we could get into problems with truncate as
* ip_alloc_sem is used there to protect against i_size
@@ -2118,9 +2118,13 @@ relock:
* direct write may have instantiated a few
* blocks outside i_size. Trim these off again.
* Don't need i_size_read because we hold i_mutex.
+ *
+ * XXX(hch): this looks buggy because ocfs2 did not
+ * actually implement ->truncate. Take a look at
+ * the new truncate sequence and update this accordingly
*/
if (*ppos + count > inode->i_size)
- vmtruncate(inode, inode->i_size);
+ simple_setsize(inode, inode->i_size);
ret = written;
goto out_dio;
}
diff --git a/fs/smbfs/inode.c b/fs/smbfs/inode.c
index dfa1d67f8fca..9551cb6f7fe4 100644
--- a/fs/smbfs/inode.c
+++ b/fs/smbfs/inode.c
@@ -714,7 +714,7 @@ smb_notify_change(struct dentry *dentry, struct iattr *attr)
error = server->ops->truncate(inode, attr->ia_size);
if (error)
goto out;
- error = vmtruncate(inode, attr->ia_size);
+ error = simple_setsize(inode, attr->ia_size);
if (error)
goto out;
refresh = 1;
diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c
index c726da68e6be..12f445cee9f7 100644
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -967,12 +967,15 @@ static int do_writepage(struct page *page, int len)
* the page locked, and it locks @ui_mutex. However, write-back does take inode
* @i_mutex, which means other VFS operations may be run on this inode at the
* same time. And the problematic one is truncation to smaller size, from where
- * we have to call 'vmtruncate()', which first changes @inode->i_size, then
+ * we have to call 'simple_setsize()', which first changes @inode->i_size, then
* drops the truncated pages. And while dropping the pages, it takes the page
- * lock. This means that 'do_truncation()' cannot call 'vmtruncate()' with
+ * lock. This means that 'do_truncation()' cannot call 'simple_setsize()' with
* @ui_mutex locked, because it would deadlock with 'ubifs_writepage()'. This
* means that @inode->i_size is changed while @ui_mutex is unlocked.
*
+ * XXX: with the new truncate the above is not true anymore, the simple_setsize
+ * calls can be replaced with the individual components.
+ *
* But in 'ubifs_writepage()' we have to guarantee that we do not write beyond
* inode size. How do we do this if @inode->i_size may became smaller while we
* are in the middle of 'ubifs_writepage()'? The UBIFS solution is the
@@ -1125,7 +1128,7 @@ static int do_truncation(struct ubifs_info *c, struct inode *inode,
budgeted = 0;
}
- err = vmtruncate(inode, new_size);
+ err = simple_setsize(inode, new_size);
if (err)
goto out_budg;
@@ -1214,7 +1217,7 @@ static int do_setattr(struct ubifs_info *c, struct inode *inode,
if (attr->ia_valid & ATTR_SIZE) {
dbg_gen("size %lld -> %lld", inode->i_size, new_size);
- err = vmtruncate(inode, new_size);
+ err = simple_setsize(inode, new_size);
if (err)
goto out;
}
@@ -1223,7 +1226,7 @@ static int do_setattr(struct ubifs_info *c, struct inode *inode,
if (attr->ia_valid & ATTR_SIZE) {
/* Truncation changes inode [mc]time */
inode->i_mtime = inode->i_ctime = ubifs_current_time(inode);
- /* 'vmtruncate()' changed @i_size, update @ui_size */
+ /* 'simple_setsize()' changed @i_size, update @ui_size */
ui->ui_size = inode->i_size;
}
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index b0904536cc1c..2eef553d50c8 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -379,7 +379,7 @@ struct ubifs_gced_idx_leb {
* The @ui_size is a "shadow" variable for @inode->i_size and UBIFS uses
* @ui_size instead of @inode->i_size. The reason for this is that UBIFS cannot
* make sure @inode->i_size is always changed under @ui_mutex, because it
- * cannot call 'vmtruncate()' with @ui_mutex locked, because it would deadlock
+ * cannot call 'simple_setsize()' with @ui_mutex locked, because it would deadlock
* with 'ubifs_writepage()' (see file.c). All the other inode fields are
* changed under @ui_mutex, so they do not need "shadow" fields. Note, one
* could consider to rework locking and base it on "shadow" fields.
diff --git a/fs/ufs/truncate.c b/fs/ufs/truncate.c
index f294c44577dc..3733057e7833 100644
--- a/fs/ufs/truncate.c
+++ b/fs/ufs/truncate.c
@@ -501,12 +501,10 @@ out:
return err;
}
-
/*
- * We don't define our `inode->i_op->truncate', and call it here,
- * because of:
- * - there is no way to know old size
- * - there is no way inform user about error, if it happens in `truncate'
+ * TODO:
+ * - truncate case should use proper ordering instead of using
+ * simple_setsize
*/
int ufs_setattr(struct dentry *dentry, struct iattr *attr)
{
@@ -530,7 +528,7 @@ int ufs_setattr(struct dentry *dentry, struct iattr *attr)
if (ia_valid & ATTR_SIZE && attr->ia_size != inode->i_size) {
loff_t old_i_size = inode->i_size;
- error = vmtruncate(inode, attr->ia_size);
+ error = simple_setsize(inode, attr->ia_size);
if (error)
return error;
error = ufs_truncate(inode, old_i_size);