net: bridge: mst: Support setting and reporting MST port states

Make it possible to change the port state in a given MSTI by extending
the bridge port netlink interface (RTM_SETLINK on PF_BRIDGE).The
proposed iproute2 interface would be:

    bridge mst set dev <PORT> msti <MSTI> state <STATE>

Current states in all applicable MSTIs can also be dumped via a
corresponding RTM_GETLINK. The proposed iproute interface looks like
this:

$ bridge mst
port              msti
vb1               0
		    state forwarding
		  100
		    state disabled
vb2               0
		    state forwarding
		  100
		    state forwarding

The preexisting per-VLAN states are still valid in the MST
mode (although they are read-only), and can be queried as usual if one
is interested in knowing a particular VLAN's state without having to
care about the VID to MSTI mapping (in this example VLAN 20 and 30 are
bound to MSTI 100):

$ bridge -d vlan
port              vlan-id
vb1               10
		    state forwarding mcast_router 1
		  20
		    state disabled mcast_router 1
		  30
		    state disabled mcast_router 1
		  40
		    state forwarding mcast_router 1
vb2               10
		    state forwarding mcast_router 1
		  20
		    state forwarding mcast_router 1
		  30
		    state forwarding mcast_router 1
		  40
		    state forwarding mcast_router 1

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 43 insertions, 1 deletions

diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c
index 7d4432ca9a20..a8d90fa8621e 100644
--- a/net/bridge/br_netlink.c
+++ b/net/bridge/br_netlink.c
@@ -119,6 +119,9 @@ static size_t br_get_link_af_size_filtered(const struct net_device *dev,
 	/* Each VLAN is returned in bridge_vlan_info along with flags */
 	vinfo_sz += num_vlan_infos * nla_total_size(sizeof(struct bridge_vlan_info));
 
+	if (filter_mask & RTEXT_FILTER_MST)
+		vinfo_sz += br_mst_info_size(vg);
+
 	if (!(filter_mask & RTEXT_FILTER_CFM_STATUS))
 		return vinfo_sz;
 
@@ -485,7 +488,8 @@ static int br_fill_ifinfo(struct sk_buff *skb,
 			   RTEXT_FILTER_BRVLAN_COMPRESSED |
 			   RTEXT_FILTER_MRP |
 			   RTEXT_FILTER_CFM_CONFIG |
-			   RTEXT_FILTER_CFM_STATUS)) {
+			   RTEXT_FILTER_CFM_STATUS |
+			   RTEXT_FILTER_MST)) {
 		af = nla_nest_start_noflag(skb, IFLA_AF_SPEC);
 		if (!af)
 			goto nla_put_failure;
@@ -564,7 +568,28 @@ static int br_fill_ifinfo(struct sk_buff *skb,
 		nla_nest_end(skb, cfm_nest);
 	}
 
+	if ((filter_mask & RTEXT_FILTER_MST) &&
+	    br_opt_get(br, BROPT_MST_ENABLED) && port) {
+		const struct net_bridge_vlan_group *vg = nbp_vlan_group(port);
+		struct nlattr *mst_nest;
+		int err;
+
+		if (!vg || !vg->num_vlans)
+			goto done;
+
+		mst_nest = nla_nest_start(skb, IFLA_BRIDGE_MST);
+		if (!mst_nest)
+			goto nla_put_failure;
+
+		err = br_mst_fill_info(skb, vg);
+		if (err)
+			goto nla_put_failure;
+
+		nla_nest_end(skb, mst_nest);
+	}
+
 done:
+
 	if (af)
 		nla_nest_end(skb, af);
 	nlmsg_end(skb, nlh);
@@ -803,6 +828,23 @@ static int br_afspec(struct net_bridge *br,
 			if (err)
 				return err;
 			break;
+		case IFLA_BRIDGE_MST:
+			if (!p) {
+				NL_SET_ERR_MSG(extack,
+					       "MST states can only be set on bridge ports");
+				return -EINVAL;
+			}
+
+			if (cmd != RTM_SETLINK) {
+				NL_SET_ERR_MSG(extack,
+					       "MST states can only be set through RTM_SETLINK");
+				return -EINVAL;
+			}
+
+			err = br_mst_process(p, attr, extack);
+			if (err)
+				return err;
+			break;
 		}
 	}