|author||David S. Miller <email@example.com>||2019-11-12 20:08:00 -0800|
|committer||David S. Miller <firstname.lastname@example.org>||2019-11-12 20:08:00 -0800|
|parent||net: dsa: sja1105: Print the reset reason (diff)|
|parent||net: bcmgenet: Add RGMII_RXID support (diff)|
Merge branch 'ARM-Enable-GENET-support-for-RPi-4'
Stefan Wahren says: ==================== ARM: Enable GENET support for RPi 4 Raspberry Pi 4 uses the broadcom genet chip in version five. This chip has a dma controller integrated. Up to now the maximal burst size was hard-coded to 0x10. But it turns out that Raspberry Pi 4 does only work with the smaller maximal burst size of 0x8. Additionally the patch series has some IRQ retrieval improvements and adds support for a missing PHY mode. This series based on Matthias Brugger's V1 series .  - https://patchwork.kernel.org/cover/11186193/ Changes in V5: - address Doug's comment Changes in V4: - rebased on current net-next - remove RGMII_ID support - remove fixes tag from patch 1 - add Florian's suggestions to patch 5 Changes in V3: - introduce SoC-specific compatibles for GENET (incl. dt-binding) - use platform_get_irq_optional for optional IRQ - remove Fixes tag from IRQ error handling change - move most of MDIO stuff to bcm2711.dtsi Changes in V2: - add 2 fixes for IRQ retrieval - add support for missing PHY modes - declare PHY mode RGMII RXID based on the default settings - add alias to allow firmware append the MAC address ==================== Signed-off-by: David S. Miller <email@example.com>
Diffstat (limited to 'net/ipv4')
0 files changed, 0 insertions, 0 deletions