sound: Retire OSS

Since no complaints have been raised after disabling the build of OSS
(Open Sound System) by the commit 31cbee6a5611 ("sound: Disable the
build of OSS drivers"), let's finally drop the whole code and
documentation.

Some glue codes are still left intact since sound/oss/dmasound stuff
remains -- which is an independent implementation solely for m68k, and
it's not covered by ALSA yet.

Also, a couple of API header files (linux/sound.h and
linux/soundcard.h) are kept remaining as well, since the OSS API
itself is still supported by ALSA OSS emulation, and applications can
refer to these.

Where we're at it, some help texts in the top-level Kconfig are
adjusted, too (who still needs to specify I/O port in kbuild
nowadays?).

Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 0 insertions, 1255 deletions

diff --git a/sound/oss/opl3.c b/sound/oss/opl3.c
deleted file mode 100644
index f0f5b5be6314..000000000000
--- a/sound/oss/opl3.c
+++ /dev/null
@@ -1,1255 +0,0 @@
-/*
- * sound/oss/opl3.c
- *
- * A low level driver for Yamaha YM3812 and OPL-3 -chips
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- *
- * Changes
- *	Thomas Sailer   	ioctl code reworked (vmalloc/vfree removed)
- *	Alan Cox		modularisation, fixed sound_mem allocs.
- *	Christoph Hellwig	Adapted to module_init/module_exit
- *	Arnaldo C. de Melo	get rid of check_region, use request_region for
- *				OPL4, release it on exit, some cleanups.
- *
- * Status
- *	Believed to work. Badly needs rewriting a bit to support multiple
- *	OPL3 devices.
- */
-
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-
-/*
- * Major improvements to the FM handling 30AUG92 by Rob Hooft,
- * hooft@chem.ruu.nl
- */
-
-#include "sound_config.h"
-
-#include "opl3_hw.h"
-
-#define MAX_VOICE	18
-#define OFFS_4OP	11
-
-struct voice_info
-{
-	unsigned char   keyon_byte;
-	long            bender;
-	long            bender_range;
-	unsigned long   orig_freq;
-	unsigned long   current_freq;
-	int             volume;
-	int             mode;
-	int             panning;	/* 0xffff means not set */
-};
-
-struct opl_devinfo
-{
-	int             base;
-	int             left_io, right_io;
-	int             nr_voice;
-	int             lv_map[MAX_VOICE];
-
-	struct voice_info voc[MAX_VOICE];
-	struct voice_alloc_info *v_alloc;
-	struct channel_info *chn_info;
-
-	struct sbi_instrument i_map[SBFM_MAXINSTR];
-	struct sbi_instrument *act_i[MAX_VOICE];
-
-	struct synth_info fm_info;
-
-	int             busy;
-	int             model;
-	unsigned char   cmask;
-
-	int             is_opl4;
-};
-
-static struct opl_devinfo *devc = NULL;
-
-static int      detected_model;
-
-static int      store_instr(int instr_no, struct sbi_instrument *instr);
-static void     freq_to_fnum(int freq, int *block, int *fnum);
-static void     opl3_command(int io_addr, unsigned int addr, unsigned int val);
-static int      opl3_kill_note(int dev, int voice, int note, int velocity);
-
-static void enter_4op_mode(void)
-{
-	int i;
-	static int v4op[MAX_VOICE] = {
-		0, 1, 2, 9, 10, 11, 6, 7, 8, 15, 16, 17
-	};
-
-	devc->cmask = 0x3f;	/* Connect all possible 4 OP voice operators */
-	opl3_command(devc->right_io, CONNECTION_SELECT_REGISTER, 0x3f);
-
-	for (i = 0; i < 3; i++)
-		pv_map[i].voice_mode = 4;
-	for (i = 3; i < 6; i++)
-		pv_map[i].voice_mode = 0;
-
-	for (i = 9; i < 12; i++)
-		pv_map[i].voice_mode = 4;
-	for (i = 12; i < 15; i++)
-		pv_map[i].voice_mode = 0;
-
-	for (i = 0; i < 12; i++)
-		devc->lv_map[i] = v4op[i];
-	devc->v_alloc->max_voice = devc->nr_voice = 12;
-}
-
-static int opl3_ioctl(int dev, unsigned int cmd, void __user * arg)
-{
-	struct sbi_instrument ins;
-	
-	switch (cmd) {
-		case SNDCTL_FM_LOAD_INSTR:
-			printk(KERN_WARNING "Warning: Obsolete ioctl(SNDCTL_FM_LOAD_INSTR) used. Fix the program.\n");
-			if (copy_from_user(&ins, arg, sizeof(ins)))
-				return -EFAULT;
-			if (ins.channel < 0 || ins.channel >= SBFM_MAXINSTR) {
-				printk(KERN_WARNING "FM Error: Invalid instrument number %d\n", ins.channel);
-				return -EINVAL;
-			}
-			return store_instr(ins.channel, &ins);
-
-		case SNDCTL_SYNTH_INFO:
-			devc->fm_info.nr_voices = (devc->nr_voice == 12) ? 6 : devc->nr_voice;
-			if (copy_to_user(arg, &devc->fm_info, sizeof(devc->fm_info)))
-				return -EFAULT;
-			return 0;
-
-		case SNDCTL_SYNTH_MEMAVL:
-			return 0x7fffffff;
-
-		case SNDCTL_FM_4OP_ENABLE:
-			if (devc->model == 2)
-				enter_4op_mode();
-			return 0;
-
-		default:
-			return -EINVAL;
-	}
-}
-
-static int opl3_detect(int ioaddr)
-{
-	/*
-	 * This function returns 1 if the FM chip is present at the given I/O port
-	 * The detection algorithm plays with the timer built in the FM chip and
-	 * looks for a change in the status register.
-	 *
-	 * Note! The timers of the FM chip are not connected to AdLib (and compatible)
-	 * boards.
-	 *
-	 * Note2! The chip is initialized if detected.
-	 */
-
-	unsigned char stat1, signature;
-	int i;
-
-	if (devc != NULL)
-	{
-		printk(KERN_ERR "opl3: Only one OPL3 supported.\n");
-		return 0;
-	}
-
-	devc = kzalloc(sizeof(*devc), GFP_KERNEL);
-
-	if (devc == NULL)
-	{
-		printk(KERN_ERR "opl3: Can't allocate memory for the device control "
-			"structure \n ");
-		return 0;
-	}
-
-	strcpy(devc->fm_info.name, "OPL2");
-
-	if (!request_region(ioaddr, 4, devc->fm_info.name)) {
-		printk(KERN_WARNING "opl3: I/O port 0x%x already in use\n", ioaddr);
-		goto cleanup_devc;
-	}
-
-	devc->base = ioaddr;
-
-	/* Reset timers 1 and 2 */
-	opl3_command(ioaddr, TIMER_CONTROL_REGISTER, TIMER1_MASK | TIMER2_MASK);
-
-	/* Reset the IRQ of the FM chip */
-	opl3_command(ioaddr, TIMER_CONTROL_REGISTER, IRQ_RESET);
-
-	signature = stat1 = inb(ioaddr);	/* Status register */
-
-	if (signature != 0x00 && signature != 0x06 && signature != 0x02 &&
-		signature != 0x0f)
-	{
-		MDB(printk(KERN_INFO "OPL3 not detected %x\n", signature));
-		goto cleanup_region;
-	}
-
-	if (signature == 0x06)		/* OPL2 */
-	{
-		detected_model = 2;
-	}
-	else if (signature == 0x00 || signature == 0x0f)	/* OPL3 or OPL4 */
-	{
-		unsigned char tmp;
-
-		detected_model = 3;
-
-		/*
-		 * Detect availability of OPL4 (_experimental_). Works probably
-		 * only after a cold boot. In addition the OPL4 port
-		 * of the chip may not be connected to the PC bus at all.
-		 */
-
-		opl3_command(ioaddr + 2, OPL3_MODE_REGISTER, 0x00);
-		opl3_command(ioaddr + 2, OPL3_MODE_REGISTER, OPL3_ENABLE | OPL4_ENABLE);
-
-		if ((tmp = inb(ioaddr)) == 0x02)	/* Have a OPL4 */
-		{
-			detected_model = 4;
-		}
-
-		if (request_region(ioaddr - 8, 2, "OPL4"))	/* OPL4 port was free */
-		{
-			int tmp;
-
-			outb((0x02), ioaddr - 8);	/* Select OPL4 ID register */
-			udelay(10);
-			tmp = inb(ioaddr - 7);		/* Read it */
-			udelay(10);
-
-			if (tmp == 0x20)	/* OPL4 should return 0x20 here */
-			{
-				detected_model = 4;
-				outb((0xF8), ioaddr - 8);	/* Select OPL4 FM mixer control */
-				udelay(10);
-				outb((0x1B), ioaddr - 7);	/* Write value */
-				udelay(10);
-			}
-			else
-			{ /* release OPL4 port */
-				release_region(ioaddr - 8, 2);
-				detected_model = 3;
-			}
-		}
-		opl3_command(ioaddr + 2, OPL3_MODE_REGISTER, 0);
-	}
-	for (i = 0; i < 9; i++)
-		opl3_command(ioaddr, KEYON_BLOCK + i, 0);	/*
-								 * Note off
-								 */
-
-	opl3_command(ioaddr, TEST_REGISTER, ENABLE_WAVE_SELECT);
-	opl3_command(ioaddr, PERCOSSION_REGISTER, 0x00);	/*
-								 * Melodic mode.
-								 */
-	return 1;
-cleanup_region:
-	release_region(ioaddr, 4);
-cleanup_devc:
-	kfree(devc);
-	devc = NULL;
-	return 0;
-}
-
-static int opl3_kill_note  (int devno, int voice, int note, int velocity)
-{
-	 struct physical_voice_info *map;
-
-	 if (voice < 0 || voice >= devc->nr_voice)
-		 return 0;
-
-	 devc->v_alloc->map[voice] = 0;
-
-	 map = &pv_map[devc->lv_map[voice]];
-
-	 if (map->voice_mode == 0)
-		 return 0;
-
-	 opl3_command(map->ioaddr, KEYON_BLOCK + map->voice_num, devc->voc[voice].keyon_byte & ~0x20);
-	 devc->voc[voice].keyon_byte = 0;
-	 devc->voc[voice].bender = 0;
-	 devc->voc[voice].volume = 64;
-	 devc->voc[voice].panning = 0xffff;	/* Not set */
-	 devc->voc[voice].bender_range = 200;
-	 devc->voc[voice].orig_freq = 0;
-	 devc->voc[voice].current_freq = 0;
-	 devc->voc[voice].mode = 0;
-	 return 0;
-}
-
-#define HIHAT			0
-#define CYMBAL			1
-#define TOMTOM			2
-#define SNARE			3
-#define BDRUM			4
-#define UNDEFINED		TOMTOM
-#define DEFAULT			TOMTOM
-
-static int store_instr(int instr_no, struct sbi_instrument *instr)
-{
-	if (instr->key != FM_PATCH && (instr->key != OPL3_PATCH || devc->model != 2))
-		printk(KERN_WARNING "FM warning: Invalid patch format field (key) 0x%x\n", instr->key);
-	memcpy((char *) &(devc->i_map[instr_no]), (char *) instr, sizeof(*instr));
-	return 0;
-}
-
-static int opl3_set_instr  (int dev, int voice, int instr_no)
-{
-	if (voice < 0 || voice >= devc->nr_voice)
-		return 0;
-	if (instr_no < 0 || instr_no >= SBFM_MAXINSTR)
-		instr_no = 0;	/* Acoustic piano (usually) */
-
-	devc->act_i[voice] = &devc->i_map[instr_no];
-	return 0;
-}
-
-/*
- * The next table looks magical, but it certainly is not. Its values have
- * been calculated as table[i]=8*log(i/64)/log(2) with an obvious exception
- * for i=0. This log-table converts a linear volume-scaling (0..127) to a
- * logarithmic scaling as present in the FM-synthesizer chips. so :    Volume
- * 64 =  0 db = relative volume  0 and:    Volume 32 = -6 db = relative
- * volume -8 it was implemented as a table because it is only 128 bytes and
- * it saves a lot of log() calculations. (RH)
- */
-
-static char fm_volume_table[128] =
-{
-	-64, -48, -40, -35, -32, -29, -27, -26,
-	-24, -23, -21, -20, -19, -18, -18, -17,
-	-16, -15, -15, -14, -13, -13, -12, -12,
-	-11, -11, -10, -10, -10, -9, -9, -8,
-	-8, -8, -7, -7, -7, -6, -6, -6,
-	-5, -5, -5, -5, -4, -4, -4, -4,
-	-3, -3, -3, -3, -2, -2, -2, -2,
-	-2, -1, -1, -1, -1, 0, 0, 0,
-	0, 0, 0, 1, 1, 1, 1, 1,
-	1, 2, 2, 2, 2, 2, 2, 2,
-	3, 3, 3, 3, 3, 3, 3, 4,
-	4, 4, 4, 4, 4, 4, 4, 5,
-	5, 5, 5, 5, 5, 5, 5, 5,
-	6, 6, 6, 6, 6, 6, 6, 6,
-	6, 7, 7, 7, 7, 7, 7, 7,
-	7, 7, 7, 8, 8, 8, 8, 8
-};
-
-static void calc_vol(unsigned char *regbyte, int volume, int main_vol)
-{
-	int level = (~*regbyte & 0x3f);
-
-	if (main_vol > 127)
-		main_vol = 127;
-	volume = (volume * main_vol) / 127;
-
-	if (level)
-		level += fm_volume_table[volume];
-
-	if (level > 0x3f)
-		level = 0x3f;
-	if (level < 0)
-		level = 0;
-
-	*regbyte = (*regbyte & 0xc0) | (~level & 0x3f);
-}
-
-static void set_voice_volume(int voice, int volume, int main_vol)
-{
-	unsigned char vol1, vol2, vol3, vol4;
-	struct sbi_instrument *instr;
-	struct physical_voice_info *map;
-
-	if (voice < 0 || voice >= devc->nr_voice)
-		return;
-
-	map = &pv_map[devc->lv_map[voice]];
-	instr = devc->act_i[voice];
-
-	if (!instr)
-		instr = &devc->i_map[0];
-
-	if (instr->channel < 0)
-		return;
-
-	if (devc->voc[voice].mode == 0)
-		return;
-
-	if (devc->voc[voice].mode == 2)
-	{
-		vol1 = instr->operators[2];
-		vol2 = instr->operators[3];
-		if ((instr->operators[10] & 0x01))
-		{
-			calc_vol(&vol1, volume, main_vol);
-			calc_vol(&vol2, volume, main_vol);
-		}
-		else
-		{
-			calc_vol(&vol2, volume, main_vol);
-		}
-		opl3_command(map->ioaddr, KSL_LEVEL + map->op[0], vol1);
-		opl3_command(map->ioaddr, KSL_LEVEL + map->op[1], vol2);
-	}
-	else
-	{	/*
-		 * 4 OP voice
-		 */
-		int connection;
-
-		vol1 = instr->operators[2];
-		vol2 = instr->operators[3];
-		vol3 = instr->operators[OFFS_4OP + 2];
-		vol4 = instr->operators[OFFS_4OP + 3];
-
-		/*
-		 * The connection method for 4 OP devc->voc is defined by the rightmost
-		 * bits at the offsets 10 and 10+OFFS_4OP
-		 */
-
-		connection = ((instr->operators[10] & 0x01) << 1) | (instr->operators[10 + OFFS_4OP] & 0x01);
-
-		switch (connection)
-		{
-			case 0:
-				calc_vol(&vol4, volume, main_vol);
-				break;
-
-			case 1:
-				calc_vol(&vol2, volume, main_vol);
-				calc_vol(&vol4, volume, main_vol);
-				break;
-
-			case 2:
-				calc_vol(&vol1, volume, main_vol);
-				calc_vol(&vol4, volume, main_vol);
-				break;
-
-			case 3:
-				calc_vol(&vol1, volume, main_vol);
-				calc_vol(&vol3, volume, main_vol);
-				calc_vol(&vol4, volume, main_vol);
-				break;
-
-			default:
-				;
-		}
-		opl3_command(map->ioaddr, KSL_LEVEL + map->op[0], vol1);
-		opl3_command(map->ioaddr, KSL_LEVEL + map->op[1], vol2);
-		opl3_command(map->ioaddr, KSL_LEVEL + map->op[2], vol3);
-		opl3_command(map->ioaddr, KSL_LEVEL + map->op[3], vol4);
-	}
-}
-
-static int opl3_start_note (int dev, int voice, int note, int volume)
-{
-	unsigned char data, fpc;
-	int block, fnum, freq, voice_mode, pan;
-	struct sbi_instrument *instr;
-	struct physical_voice_info *map;
-
-	if (voice < 0 || voice >= devc->nr_voice)
-		return 0;
-
-	map = &pv_map[devc->lv_map[voice]];
-	pan = devc->voc[voice].panning;
-
-	if (map->voice_mode == 0)
-		return 0;
-
-	if (note == 255)	/*
-				 * Just change the volume
-				 */
-	{
-		set_voice_volume(voice, volume, devc->voc[voice].volume);
-		return 0;
-	}
-
-	/*
-	 * Kill previous note before playing
-	 */
-	
-	opl3_command(map->ioaddr, KSL_LEVEL + map->op[1], 0xff);	/*
-									 * Carrier
-									 * volume to
-									 * min
-									 */
-	opl3_command(map->ioaddr, KSL_LEVEL + map->op[0], 0xff);	/*
-									 * Modulator
-									 * volume to
-									 */
-
-	if (map->voice_mode == 4)
-	{
-		opl3_command(map->ioaddr, KSL_LEVEL + map->op[2], 0xff);
-		opl3_command(map->ioaddr, KSL_LEVEL + map->op[3], 0xff);
-	}
-
-	opl3_command(map->ioaddr, KEYON_BLOCK + map->voice_num, 0x00);	/*
-									 * Note
-									 * off
-									 */
-
-	instr = devc->act_i[voice];
-	
-	if (!instr)
-		instr = &devc->i_map[0];
-
-	if (instr->channel < 0)
-	{
-		printk(KERN_WARNING "opl3: Initializing voice %d with undefined instrument\n", voice);
-		return 0;
-	}
-
-	if (map->voice_mode == 2 && instr->key == OPL3_PATCH)
-		return 0;	/*
-				 * Cannot play
-				 */
-
-	voice_mode = map->voice_mode;
-
-	if (voice_mode == 4)
-	{
-		int voice_shift;
-
-		voice_shift = (map->ioaddr == devc->left_io) ? 0 : 3;
-		voice_shift += map->voice_num;
-
-		if (instr->key != OPL3_PATCH)	/*
-						 * Just 2 OP patch
-						 */
-		{
-			voice_mode = 2;
-			devc->cmask &= ~(1 << voice_shift);
-		}
-		else
-		{
-			devc->cmask |= (1 << voice_shift);
-		}
-
-		opl3_command(devc->right_io, CONNECTION_SELECT_REGISTER, devc->cmask);
-	}
-
-	/*
-	 * Set Sound Characteristics
-	 */
-	
-	opl3_command(map->ioaddr, AM_VIB + map->op[0], instr->operators[0]);
-	opl3_command(map->ioaddr, AM_VIB + map->op[1], instr->operators[1]);
-
-	/*
-	 * Set Attack/Decay
-	 */
-	
-	opl3_command(map->ioaddr, ATTACK_DECAY + map->op[0], instr->operators[4]);
-	opl3_command(map->ioaddr, ATTACK_DECAY + map->op[1], instr->operators[5]);
-
-	/*
-	 * Set Sustain/Release
-	 */
-	
-	opl3_command(map->ioaddr, SUSTAIN_RELEASE + map->op[0], instr->operators[6]);
-	opl3_command(map->ioaddr, SUSTAIN_RELEASE + map->op[1], instr->operators[7]);
-
-	/*
-	 * Set Wave Select
-	 */
-
-	opl3_command(map->ioaddr, WAVE_SELECT + map->op[0], instr->operators[8]);
-	opl3_command(map->ioaddr, WAVE_SELECT + map->op[1], instr->operators[9]);
-
-	/*
-	 * Set Feedback/Connection
-	 */
-	
-	fpc = instr->operators[10];
-
-	if (pan != 0xffff)
-	{
-		fpc &= ~STEREO_BITS;
-		if (pan < -64)
-			fpc |= VOICE_TO_LEFT;
-		else
-			if (pan > 64)
-				fpc |= VOICE_TO_RIGHT;
-			else
-				fpc |= (VOICE_TO_LEFT | VOICE_TO_RIGHT);
-	}
-
-	if (!(fpc & 0x30))
-		fpc |= 0x30;	/*
-				 * Ensure that at least one chn is enabled
-				 */
-	opl3_command(map->ioaddr, FEEDBACK_CONNECTION + map->voice_num, fpc);
-
-	/*
-	 * If the voice is a 4 OP one, initialize the operators 3 and 4 also
-	 */
-
-	if (voice_mode == 4)
-	{
-		/*
-		 * Set Sound Characteristics
-		 */
-	
-		opl3_command(map->ioaddr, AM_VIB + map->op[2], instr->operators[OFFS_4OP + 0]);
-		opl3_command(map->ioaddr, AM_VIB + map->op[3], instr->operators[OFFS_4OP + 1]);
-
-		/*
-		 * Set Attack/Decay
-		 */
-		
-		opl3_command(map->ioaddr, ATTACK_DECAY + map->op[2], instr->operators[OFFS_4OP + 4]);
-		opl3_command(map->ioaddr, ATTACK_DECAY + map->op[3], instr->operators[OFFS_4OP + 5]);
-
-		/*
-		 * Set Sustain/Release
-		 */
-		
-		opl3_command(map->ioaddr, SUSTAIN_RELEASE + map->op[2], instr->operators[OFFS_4OP + 6]);
-		opl3_command(map->ioaddr, SUSTAIN_RELEASE + map->op[3], instr->operators[OFFS_4OP + 7]);
-
-		/*
-		 * Set Wave Select
-		 */
-		
-		opl3_command(map->ioaddr, WAVE_SELECT + map->op[2], instr->operators[OFFS_4OP + 8]);
-		opl3_command(map->ioaddr, WAVE_SELECT + map->op[3], instr->operators[OFFS_4OP + 9]);
-
-		/*
-		 * Set Feedback/Connection
-		 */
-		
-		fpc = instr->operators[OFFS_4OP + 10];
-		if (!(fpc & 0x30))
-			 fpc |= 0x30;	/*
-					 * Ensure that at least one chn is enabled
-					 */
-		opl3_command(map->ioaddr, FEEDBACK_CONNECTION + map->voice_num + 3, fpc);
-	}
-
-	devc->voc[voice].mode = voice_mode;
-	set_voice_volume(voice, volume, devc->voc[voice].volume);
-
-	freq = devc->voc[voice].orig_freq = note_to_freq(note) / 1000;
-
-	/*
-	 * Since the pitch bender may have been set before playing the note, we
-	 * have to calculate the bending now.
-	 */
-
-	freq = compute_finetune(devc->voc[voice].orig_freq, devc->voc[voice].bender, devc->voc[voice].bender_range, 0);
-	devc->voc[voice].current_freq = freq;
-
-	freq_to_fnum(freq, &block, &fnum);
-
-	/*
-	 * Play note
-	 */
-
-	data = fnum & 0xff;	/*
-				 * Least significant bits of fnumber
-				 */
-	opl3_command(map->ioaddr, FNUM_LOW + map->voice_num, data);
-
-	data = 0x20 | ((block & 0x7) << 2) | ((fnum >> 8) & 0x3);
-	devc->voc[voice].keyon_byte = data;
-	opl3_command(map->ioaddr, KEYON_BLOCK + map->voice_num, data);
-	if (voice_mode == 4)
-		opl3_command(map->ioaddr, KEYON_BLOCK + map->voice_num + 3, data);
-
-	return 0;
-}
-
-static void freq_to_fnum    (int freq, int *block, int *fnum)
-{
-	int f, octave;
-
-	/*
-	 * Converts the note frequency to block and fnum values for the FM chip
-	 */
-	/*
-	 * First try to compute the block -value (octave) where the note belongs
-	 */
-
-	f = freq;
-
-	octave = 5;
-
-	if (f == 0)
-		octave = 0;
-	else if (f < 261)
-	{
-		while (f < 261)
-		{
-			octave--;
-			f <<= 1;
-		}
-	}
-	else if (f > 493)
-	{
-		while (f > 493)
-		{
-			 octave++;
-			 f >>= 1;
-		}
-	}
-
-	if (octave > 7)
-		octave = 7;
-
-	*fnum = freq * (1 << (20 - octave)) / 49716;
-	*block = octave;
-}
-
-static void opl3_command    (int io_addr, unsigned int addr, unsigned int val)
-{
-	int i;
-
-	/*
-	 * The original 2-OP synth requires a quite long delay after writing to a
-	 * register. The OPL-3 survives with just two INBs
-	 */
-
-	outb(((unsigned char) (addr & 0xff)), io_addr);
-
-	if (devc->model != 2)
-		udelay(10);
-	else
-		for (i = 0; i < 2; i++)
-			inb(io_addr);
-
-	outb(((unsigned char) (val & 0xff)), io_addr + 1);
-
-	if (devc->model != 2)
-		udelay(30);
-	else
-		for (i = 0; i < 2; i++)
-			inb(io_addr);
-}
-
-static void opl3_reset(int devno)
-{
-	int i;
-
-	for (i = 0; i < 18; i++)
-		devc->lv_map[i] = i;
-
-	for (i = 0; i < devc->nr_voice; i++)
-	{
-		opl3_command(pv_map[devc->lv_map[i]].ioaddr,
-			KSL_LEVEL + pv_map[devc->lv_map[i]].op[0], 0xff);
-
-		opl3_command(pv_map[devc->lv_map[i]].ioaddr,
-			KSL_LEVEL + pv_map[devc->lv_map[i]].op[1], 0xff);
-
-		if (pv_map[devc->lv_map[i]].voice_mode == 4)
-		{
-			opl3_command(pv_map[devc->lv_map[i]].ioaddr,
-				KSL_LEVEL + pv_map[devc->lv_map[i]].op[2], 0xff);
-
-			opl3_command(pv_map[devc->lv_map[i]].ioaddr,
-				KSL_LEVEL + pv_map[devc->lv_map[i]].op[3], 0xff);
-		}
-
-		opl3_kill_note(devno, i, 0, 64);
-	}
-
-	if (devc->model == 2)
-	{
-		devc->v_alloc->max_voice = devc->nr_voice = 18;
-
-		for (i = 0; i < 18; i++)
-			pv_map[i].voice_mode = 2;
-
-	}
-}
-
-static int opl3_open(int dev, int mode)
-{
-	int i;
-
-	if (devc->busy)
-		return -EBUSY;
-	devc->busy = 1;
-
-	devc->v_alloc->max_voice = devc->nr_voice = (devc->model == 2) ? 18 : 9;
-	devc->v_alloc->timestamp = 0;
-
-	for (i = 0; i < 18; i++)
-	{
-		devc->v_alloc->map[i] = 0;
-		devc->v_alloc->alloc_times[i] = 0;
-	}
-
-	devc->cmask = 0x00;	/*
-				 * Just 2 OP mode
-				 */
-	if (devc->model == 2)
-		opl3_command(devc->right_io, CONNECTION_SELECT_REGISTER, devc->cmask);
-	return 0;
-}
-
-static void opl3_close(int dev)
-{
-	devc->busy = 0;
-	devc->v_alloc->max_voice = devc->nr_voice = (devc->model == 2) ? 18 : 9;
-
-	devc->fm_info.nr_drums = 0;
-	devc->fm_info.perc_mode = 0;
-
-	opl3_reset(dev);
-}
-
-static void opl3_hw_control(int dev, unsigned char *event)
-{
-}
-
-static int opl3_load_patch(int dev, int format, const char __user *addr,
-		int count, int pmgr_flag)
-{
-	struct sbi_instrument ins;
-
-	if (count <sizeof(ins))
-	{
-		printk(KERN_WARNING "FM Error: Patch record too short\n");
-		return -EINVAL;
-	}
-
-	if (copy_from_user(&ins, addr, sizeof(ins)))
-		return -EFAULT;
-
-	if (ins.channel < 0 || ins.channel >= SBFM_MAXINSTR)
-	{
-		printk(KERN_WARNING "FM Error: Invalid instrument number %d\n", ins.channel);
-		return -EINVAL;
-	}
-	ins.key = format;
-
-	return store_instr(ins.channel, &ins);
-}
-
-static void opl3_panning(int dev, int voice, int value)
-{
-
-	if (voice < 0 || voice >= devc->nr_voice)
-		return;
-
-	devc->voc[voice].panning = value;
-}
-
-static void opl3_volume_method(int dev, int mode)
-{
-}
-
-#define SET_VIBRATO(cell) { \
-	tmp = instr->operators[(cell-1)+(((cell-1)/2)*OFFS_4OP)]; \
-	if (pressure > 110) \
-		tmp |= 0x40;		/* Vibrato on */ \
-	opl3_command (map->ioaddr, AM_VIB + map->op[cell-1], tmp);}
-
-static void opl3_aftertouch(int dev, int voice, int pressure)
-{
-	int tmp;
-	struct sbi_instrument *instr;
-	struct physical_voice_info *map;
-
-	if (voice < 0 || voice >= devc->nr_voice)
-		return;
-
-	map = &pv_map[devc->lv_map[voice]];
-
-	if (map->voice_mode == 0)
-		return;
-
-	/*
-	 * Adjust the amount of vibrato depending the pressure
-	 */
-
-	instr = devc->act_i[voice];
-
-	if (!instr)
-		instr = &devc->i_map[0];
-
-	if (devc->voc[voice].mode == 4)
-	{
-		int connection = ((instr->operators[10] & 0x01) << 1) | (instr->operators[10 + OFFS_4OP] & 0x01);
-
-		switch (connection)
-		{
-			case 0:
-				SET_VIBRATO(4);
-				break;
-
-			case 1:
-				SET_VIBRATO(2);
-				SET_VIBRATO(4);
-				break;
-
-			case 2:
-				SET_VIBRATO(1);
-				SET_VIBRATO(4);
-				break;
-
-			case 3:
-				SET_VIBRATO(1);
-				SET_VIBRATO(3);
-				SET_VIBRATO(4);
-				break;
-
-		}
-		/*
-		 * Not implemented yet
-		 */
-	}
-	else
-	{
-		SET_VIBRATO(1);
-
-		if ((instr->operators[10] & 0x01))	/*
-							 * Additive synthesis
-							 */
-			SET_VIBRATO(2);
-	}
-}
-
-#undef SET_VIBRATO
-
-static void bend_pitch(int dev, int voice, int value)
-{
-	unsigned char data;
-	int block, fnum, freq;
-	struct physical_voice_info *map;
-
-	map = &pv_map[devc->lv_map[voice]];
-
-	if (map->voice_mode == 0)
-		return;
-
-	devc->voc[voice].bender = value;
-	if (!value)
-		return;
-	if (!(devc->voc[voice].keyon_byte & 0x20))
-		return;	/*
-			 * Not keyed on
-			 */
-
-	freq = compute_finetune(devc->voc[voice].orig_freq, devc->voc[voice].bender, devc->voc[voice].bender_range, 0);
-	devc->voc[voice].current_freq = freq;
-
-	freq_to_fnum(freq, &block, &fnum);
-
-	data = fnum & 0xff;	/*
-				 * Least significant bits of fnumber
-				 */
-	opl3_command(map->ioaddr, FNUM_LOW + map->voice_num, data);
-
-	data = 0x20 | ((block & 0x7) << 2) | ((fnum >> 8) & 0x3);
-	devc->voc[voice].keyon_byte = data;
-	opl3_command(map->ioaddr, KEYON_BLOCK + map->voice_num, data);
-}
-
-static void opl3_controller (int dev, int voice, int ctrl_num, int value)
-{
-	if (voice < 0 || voice >= devc->nr_voice)
-		return;
-
-	switch (ctrl_num)
-	{
-		case CTRL_PITCH_BENDER:
-			bend_pitch(dev, voice, value);
-			break;
-
-		case CTRL_PITCH_BENDER_RANGE:
-			devc->voc[voice].bender_range = value;
-			break;
-
-		case CTL_MAIN_VOLUME:
-			devc->voc[voice].volume = value / 128;
-			break;
-
-		case CTL_PAN:
-			devc->voc[voice].panning = (value * 2) - 128;
-			break;
-	}
-}
-
-static void opl3_bender(int dev, int voice, int value)
-{
-	if (voice < 0 || voice >= devc->nr_voice)
-		return;
-
-	bend_pitch(dev, voice, value - 8192);
-}
-
-static int opl3_alloc_voice(int dev, int chn, int note, struct voice_alloc_info *alloc)
-{
-	int i, p, best, first, avail, best_time = 0x7fffffff;
-	struct sbi_instrument *instr;
-	int is4op;
-	int instr_no;
-
-	if (chn < 0 || chn > 15)
-		instr_no = 0;
-	else
-		instr_no = devc->chn_info[chn].pgm_num;
-
-	instr = &devc->i_map[instr_no];
-	if (instr->channel < 0 ||	/* Instrument not loaded */
-		devc->nr_voice != 12)	/* Not in 4 OP mode */
-		is4op = 0;
-	else if (devc->nr_voice == 12)	/* 4 OP mode */
-		is4op = (instr->key == OPL3_PATCH);
-	else
-		is4op = 0;
-
-	if (is4op)
-	{
-		first = p = 0;
-		avail = 6;
-	}
-	else
-	{
-		if (devc->nr_voice == 12)	/* 4 OP mode. Use the '2 OP only' operators first */
-			first = p = 6;
-		else
-			first = p = 0;
-		avail = devc->nr_voice;
-	}
-
-	/*
-	 *    Now try to find a free voice
-	 */
-	best = first;
-
-	for (i = 0; i < avail; i++)
-	{
-		if (alloc->map[p] == 0)
-		{
-			return p;
-		}
-		if (alloc->alloc_times[p] < best_time)		/* Find oldest playing note */
-		{
-			best_time = alloc->alloc_times[p];
-			best = p;
-		}
-		p = (p + 1) % avail;
-	}
-
-	/*
-	 *    Insert some kind of priority mechanism here.
-	 */
-
-	if (best < 0)
-		best = 0;
-	if (best > devc->nr_voice)
-		best -= devc->nr_voice;
-
-	return best;	/* All devc->voc in use. Select the first one. */
-}
-
-static void opl3_setup_voice(int dev, int voice, int chn)
-{
-	struct channel_info *info;
-
-	if (voice < 0 || voice >= devc->nr_voice)
-		return;
-
-	if (chn < 0 || chn > 15)
-		return;
-
-	info = &synth_devs[dev]->chn_info[chn];
-
-	opl3_set_instr(dev, voice, info->pgm_num);
-
-	devc->voc[voice].bender = 0;
-	devc->voc[voice].bender_range = info->bender_range;
-	devc->voc[voice].volume = info->controllers[CTL_MAIN_VOLUME];
-	devc->voc[voice].panning = (info->controllers[CTL_PAN] * 2) - 128;
-}
-
-static struct synth_operations opl3_operations =
-{
-	.owner		= THIS_MODULE,
-	.id		= "OPL",
-	.info		= NULL,
-	.midi_dev	= 0,
-	.synth_type	= SYNTH_TYPE_FM,
-	.synth_subtype	= FM_TYPE_ADLIB,
-	.open		= opl3_open,
-	.close		= opl3_close,
-	.ioctl		= opl3_ioctl,
-	.kill_note	= opl3_kill_note,
-	.start_note	= opl3_start_note,
-	.set_instr	= opl3_set_instr,
-	.reset		= opl3_reset,
-	.hw_control	= opl3_hw_control,
-	.load_patch	= opl3_load_patch,
-	.aftertouch	= opl3_aftertouch,
-	.controller	= opl3_controller,
-	.panning	= opl3_panning,
-	.volume_method	= opl3_volume_method,
-	.bender		= opl3_bender,
-	.alloc_voice	= opl3_alloc_voice,
-	.setup_voice	= opl3_setup_voice
-};
-
-static int opl3_init(int ioaddr, struct module *owner)
-{
-	int i;
-	int me;
-
-	if (devc == NULL)
-	{
-		printk(KERN_ERR "opl3: Device control structure not initialized.\n");
-		return -1;
-	}
-
-	if ((me = sound_alloc_synthdev()) == -1)
-	{
-		printk(KERN_WARNING "opl3: Too many synthesizers\n");
-		return -1;
-	}
-
-	devc->nr_voice = 9;
-
-	devc->fm_info.device = 0;
-	devc->fm_info.synth_type = SYNTH_TYPE_FM;
-	devc->fm_info.synth_subtype = FM_TYPE_ADLIB;
-	devc->fm_info.perc_mode = 0;
-	devc->fm_info.nr_voices = 9;
-	devc->fm_info.nr_drums = 0;
-	devc->fm_info.instr_bank_size = SBFM_MAXINSTR;
-	devc->fm_info.capabilities = 0;
-	devc->left_io = ioaddr;
-	devc->right_io = ioaddr + 2;
-
-	if (detected_model <= 2)
-		devc->model = 1;
-	else
-	{
-		devc->model = 2;
-		if (detected_model == 4)
-			devc->is_opl4 = 1;
-	}
-
-	opl3_operations.info = &devc->fm_info;
-
-	synth_devs[me] = &opl3_operations;
-
-	if (owner)
-		synth_devs[me]->owner = owner;
-	
-	sequencer_init();
-	devc->v_alloc = &opl3_operations.alloc;
-	devc->chn_info = &opl3_operations.chn_info[0];
-
-	if (devc->model == 2)
-	{
-		if (devc->is_opl4) 
-			strcpy(devc->fm_info.name, "Yamaha OPL4/OPL3 FM");
-		else 
-			strcpy(devc->fm_info.name, "Yamaha OPL3");
-
-		devc->v_alloc->max_voice = devc->nr_voice = 18;
-		devc->fm_info.nr_drums = 0;
-		devc->fm_info.synth_subtype = FM_TYPE_OPL3;
-		devc->fm_info.capabilities |= SYNTH_CAP_OPL3;
-
-		for (i = 0; i < 18; i++)
-		{
-			if (pv_map[i].ioaddr == USE_LEFT)
-				pv_map[i].ioaddr = devc->left_io;
-			else
-				pv_map[i].ioaddr = devc->right_io;
-		}
-		opl3_command(devc->right_io, OPL3_MODE_REGISTER, OPL3_ENABLE);
-		opl3_command(devc->right_io, CONNECTION_SELECT_REGISTER, 0x00);
-	}
-	else
-	{
-		strcpy(devc->fm_info.name, "Yamaha OPL2");
-		devc->v_alloc->max_voice = devc->nr_voice = 9;
-		devc->fm_info.nr_drums = 0;
-
-		for (i = 0; i < 18; i++)
-			pv_map[i].ioaddr = devc->left_io;
-	}
-	conf_printf2(devc->fm_info.name, ioaddr, 0, -1, -1);
-
-	for (i = 0; i < SBFM_MAXINSTR; i++)
-		devc->i_map[i].channel = -1;
-
-	return me;
-}
-
-static int me;
-
-static int io = -1;
-
-module_param_hw(io, int, ioport, 0);
-
-static int __init init_opl3 (void)
-{
-	printk(KERN_INFO "YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996\n");
-
-	if (io != -1)	/* User loading pure OPL3 module */
-	{
-		if (!opl3_detect(io))
-		{
-			return -ENODEV;
-		}
-
-		me = opl3_init(io, THIS_MODULE);
-	}
-
-	return 0;
-}
-
-static void __exit cleanup_opl3(void)
-{
-	if (devc && io != -1)
-	{
-		if (devc->base) {
-			release_region(devc->base,4);
-			if (devc->is_opl4)
-				release_region(devc->base - 8, 2);
-		}
-		kfree(devc);
-		devc = NULL;
-		sound_unload_synthdev(me);
-	}
-}
-
-module_init(init_opl3);
-module_exit(cleanup_opl3);
-
-#ifndef MODULE
-static int __init setup_opl3(char *str)
-{
-        /* io  */
-	int ints[2];
-	
-	str = get_options(str, ARRAY_SIZE(ints), ints);
-	
-	io = ints[1];
-
-	return 1;
-}
-
-__setup("opl3=", setup_opl3);
-#endif
-MODULE_LICENSE("GPL");