sound: Retire OSS

Since no complaints have been raised after disabling the build of OSS
(Open Sound System) by the commit 31cbee6a5611 ("sound: Disable the
build of OSS drivers"), let's finally drop the whole code and
documentation.

Some glue codes are still left intact since sound/oss/dmasound stuff
remains -- which is an independent implementation solely for m68k, and
it's not covered by ALSA yet.

Also, a couple of API header files (linux/sound.h and
linux/soundcard.h) are kept remaining as well, since the OSS API
itself is still supported by ALSA OSS emulation, and applications can
refer to these.

Where we're at it, some help texts in the top-level Kconfig are
adjusted, too (who still needs to specify I/O port in kbuild
nowadays?).

Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 0 insertions, 92 deletions

diff --git a/sound/oss/waveartist.h b/sound/oss/waveartist.h
deleted file mode 100644
index dac4ca910d95..000000000000
--- a/sound/oss/waveartist.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * linux/sound/oss/waveartist.h
- *
- * def file for Rockwell RWA010 chip set, as installed in Rebel.com NetWinder
- */
-
-//registers
-#define CMDR	0
-#define DATR	2
-#define CTLR	4
-#define	STATR	5
-#define	IRQSTAT	12
-
-//bit defs
-//reg STATR
-#define	CMD_WE	0x80
-#define	CMD_RF	0x40
-#define	DAT_WE	0x20
-#define	DAT_RF	0x10
-
-#define	IRQ_REQ	0x08
-#define	DMA1	0x04
-#define	DMA0	0x02
-
-//bit defs
-//reg CTLR
-#define	CMD_WEIE	0x80
-#define	CMD_RFIE	0x40
-#define	DAT_WEIE	0x20
-#define	DAT_RFIE	0x10
-
-#define	RESET	0x08
-#define	DMA1_IE	0x04
-#define	DMA0_IE	0x02
-#define	IRQ_ACK	0x01
-
-//commands
-
-#define	WACMD_SYSTEMID		0x00
-#define WACMD_GETREV		0x00
-#define	WACMD_INPUTFORMAT	0x10	//0-8S, 1-16S, 2-8U
-#define	WACMD_INPUTCHANNELS	0x11	//1-Mono, 2-Stereo
-#define	WACMD_INPUTSPEED	0x12	//sampling rate
-#define	WACMD_INPUTDMA		0x13	//0-8bit, 1-16bit, 2-PIO
-#define	WACMD_INPUTSIZE		0x14	//samples to interrupt
-#define	WACMD_INPUTSTART	0x15	//start ADC
-#define	WACMD_INPUTPAUSE	0x16	//pause ADC
-#define	WACMD_INPUTSTOP		0x17	//stop ADC
-#define	WACMD_INPUTRESUME	0x18	//resume ADC
-#define	WACMD_INPUTPIO		0x19	//PIO ADC
-
-#define	WACMD_OUTPUTFORMAT	0x20	//0-8S, 1-16S, 2-8U
-#define	WACMD_OUTPUTCHANNELS	0x21	//1-Mono, 2-Stereo
-#define	WACMD_OUTPUTSPEED	0x22	//sampling rate
-#define	WACMD_OUTPUTDMA		0x23	//0-8bit, 1-16bit, 2-PIO
-#define	WACMD_OUTPUTSIZE	0x24	//samples to interrupt
-#define	WACMD_OUTPUTSTART	0x25	//start ADC
-#define	WACMD_OUTPUTPAUSE	0x26	//pause ADC
-#define	WACMD_OUTPUTSTOP	0x27	//stop ADC
-#define	WACMD_OUTPUTRESUME	0x28	//resume ADC
-#define	WACMD_OUTPUTPIO		0x29	//PIO ADC
-
-#define	WACMD_GET_LEVEL		0x30
-#define	WACMD_SET_LEVEL		0x31
-#define	WACMD_SET_MIXER		0x32
-#define	WACMD_RST_MIXER		0x33
-#define	WACMD_SET_MONO		0x34
-
-/*
- * Definitions for left/right recording input mux
- */
-#define ADC_MUX_NONE	0
-#define ADC_MUX_MIXER	1
-#define ADC_MUX_LINE	2
-#define ADC_MUX_AUX2	3
-#define ADC_MUX_AUX1	4
-#define ADC_MUX_MIC	5
-
-/*
- * Definitions for mixer gain settings
- */
-#define MIX_GAIN_LINE	0	/* line in	 */
-#define MIX_GAIN_AUX1	1	/* aux1		 */
-#define MIX_GAIN_AUX2	2	/* aux2		 */
-#define MIX_GAIN_XMIC	3	/* crossover mic */
-#define MIX_GAIN_MIC	4	/* normal mic	 */
-#define MIX_GAIN_PREMIC	5	/* preamp mic	 */
-#define MIX_GAIN_OUT	6	/* output	 */
-#define MIX_GAIN_MONO	7	/* mono in	 */
-
-int wa_sendcmd(unsigned int cmd);
-int wa_writecmd(unsigned int cmd, unsigned int arg);