selftests: Add ipv4 tcp tests to fcnal-test

Add tcp tests to fcnal-test.sh. Covers the permutations of directly
connected addresses, routed destinations, VRF and non-VRF, and expected
failures for both clients and servers. Includes permutations with
net.ipv4.tcp_l3mdev_accept set to 0 and 1.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 314 insertions, 1 deletions

diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index 4da510f6d625..f9e2f1464dcd 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -712,6 +712,317 @@ ipv4_ping()
 }
 
 ################################################################################
+# IPv4 TCP
+
+ipv4_tcp_novrf()
+{
+	local a
+
+	#
+	# server tests
+	#
+	for a in ${NSA_IP} ${NSA_LO_IP}
+	do
+		log_start
+		run_cmd nettest -s &
+		sleep 1
+		run_cmd_nsb nettest -r ${a}
+		log_test_addr ${a} $? 0 "Global server"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -s -d ${NSA_DEV} &
+	sleep 1
+	run_cmd_nsb nettest -r ${a}
+	log_test_addr ${a} $? 0 "Device server"
+
+	# verify TCP reset sent and received
+	for a in ${NSA_IP} ${NSA_LO_IP}
+	do
+		log_start
+		show_hint "Should fail 'Connection refused' since there is no server"
+		run_cmd_nsb nettest -r ${a}
+		log_test_addr ${a} $? 1 "No server"
+	done
+
+	#
+	# client
+	#
+	for a in ${NSB_IP} ${NSB_LO_IP}
+	do
+		log_start
+		run_cmd_nsb nettest -s &
+		sleep 1
+		run_cmd nettest -r ${a} -0 ${NSA_IP}
+		log_test_addr ${a} $? 0 "Client"
+
+		log_start
+		run_cmd_nsb nettest -s &
+		sleep 1
+		run_cmd nettest -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 0 "Client, device bind"
+
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -r ${a}
+		log_test_addr ${a} $? 1 "No server, unbound client"
+
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 1 "No server, device client"
+	done
+
+	#
+	# local address tests
+	#
+	for a in ${NSA_IP} ${NSA_LO_IP} 127.0.0.1
+	do
+		log_start
+		run_cmd nettest -s &
+		sleep 1
+		run_cmd nettest -r ${a} -0 ${a} -1 ${a}
+		log_test_addr ${a} $? 0 "Global server, local connection"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -s -d ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -r ${a} -0 ${a}
+	log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
+
+	for a in ${NSA_LO_IP} 127.0.0.1
+	do
+		log_start
+		show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope"
+		run_cmd nettest -s -d ${NSA_DEV} &
+		sleep 1
+		run_cmd nettest -r ${a}
+		log_test_addr ${a} $? 1 "Device server, unbound client, local connection"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -s &
+	sleep 1
+	run_cmd nettest -r ${a} -0 ${a} -d ${NSA_DEV}
+	log_test_addr ${a} $? 0 "Global server, device client, local connection"
+
+	for a in ${NSA_LO_IP} 127.0.0.1
+	do
+		log_start
+		show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope"
+		run_cmd nettest -s &
+		sleep 1
+		run_cmd nettest -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 1 "Global server, device client, local connection"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest  -d ${NSA_DEV} -r ${a} -0 ${a}
+	log_test_addr ${a} $? 0 "Device server, device client, local connection"
+
+	log_start
+	show_hint "Should fail 'Connection refused'"
+	run_cmd nettest -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 1 "No server, device client, local conn"
+}
+
+ipv4_tcp_vrf()
+{
+	local a
+
+	# disable global server
+	log_subsection "Global server disabled"
+
+	set_sysctl net.ipv4.tcp_l3mdev_accept=0
+
+	#
+	# server tests
+	#
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		show_hint "Should fail 'Connection refused' since global server with VRF is disabled"
+		run_cmd nettest -s &
+		sleep 1
+		run_cmd_nsb nettest -r ${a}
+		log_test_addr ${a} $? 1 "Global server"
+
+		log_start
+		run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+		sleep 1
+		run_cmd_nsb nettest -r ${a}
+		log_test_addr ${a} $? 0 "VRF server"
+
+		log_start
+		run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -r ${a}
+		log_test_addr ${a} $? 0 "Device server"
+
+		# verify TCP reset received
+		log_start
+		show_hint "Should fail 'Connection refused' since there is no server"
+		run_cmd_nsb nettest -r ${a}
+		log_test_addr ${a} $? 1 "No server"
+	done
+
+	# local address tests
+	# (${VRF_IP} and 127.0.0.1 both timeout)
+	a=${NSA_IP}
+	log_start
+	show_hint "Should fail 'Connection refused' since global server with VRF is disabled"
+	run_cmd nettest -s &
+	sleep 1
+	run_cmd nettest -r ${a} -d ${NSA_DEV}
+	log_test_addr ${a} $? 1 "Global server, local connection"
+
+	#
+	# enable VRF global server
+	#
+	log_subsection "VRF Global server enabled"
+	set_sysctl net.ipv4.tcp_l3mdev_accept=1
+
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		show_hint "client socket should be bound to VRF"
+		run_cmd nettest -s -2 ${VRF} &
+		sleep 1
+		run_cmd_nsb nettest -r ${a}
+		log_test_addr ${a} $? 0 "Global server"
+
+		log_start
+		show_hint "client socket should be bound to VRF"
+		run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+		sleep 1
+		run_cmd_nsb nettest -r ${a}
+		log_test_addr ${a} $? 0 "VRF server"
+
+		# verify TCP reset received
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd_nsb nettest -r ${a}
+		log_test_addr ${a} $? 1 "No server"
+	done
+
+	a=${NSA_IP}
+	log_start
+	show_hint "client socket should be bound to device"
+	run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd_nsb nettest -r ${a}
+	log_test_addr ${a} $? 0 "Device server"
+
+	# local address tests
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		show_hint "Should fail 'No route to host' since client is not bound to VRF"
+		run_cmd nettest -s -2 ${VRF} &
+		sleep 1
+		run_cmd nettest -r ${a}
+		log_test_addr ${a} $? 1 "Global server, local connection"
+	done
+
+	#
+	# client
+	#
+	for a in ${NSB_IP} ${NSB_LO_IP}
+	do
+		log_start
+		run_cmd_nsb nettest -s &
+		sleep 1
+		run_cmd nettest -r ${a} -d ${VRF}
+		log_test_addr ${a} $? 0 "Client, VRF bind"
+
+		log_start
+		run_cmd_nsb nettest -s &
+		sleep 1
+		run_cmd nettest -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 0 "Client, device bind"
+
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -r ${a} -d ${VRF}
+		log_test_addr ${a} $? 1 "No server, VRF client"
+
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 1 "No server, device client"
+	done
+
+	for a in ${NSA_IP} ${VRF_IP} 127.0.0.1
+	do
+		log_start
+		run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+		sleep 1
+		run_cmd nettest -r ${a} -d ${VRF} -0 ${a}
+		log_test_addr ${a} $? 0 "VRF server, VRF client, local connection"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+	sleep 1
+	run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a}
+	log_test_addr ${a} $? 0 "VRF server, device client, local connection"
+
+	log_start
+	show_hint "Should fail 'No route to host' since client is out of VRF scope"
+	run_cmd nettest -s -d ${VRF} &
+	sleep 1
+	run_cmd nettest -r ${a}
+	log_test_addr ${a} $? 1 "VRF server, unbound client, local connection"
+
+	log_start
+	run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -r ${a} -d ${VRF} -0 ${a}
+	log_test_addr ${a} $? 0 "Device server, VRF client, local connection"
+
+	log_start
+	run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a}
+	log_test_addr ${a} $? 0 "Device server, device client, local connection"
+}
+
+ipv4_tcp()
+{
+	log_section "IPv4/TCP"
+
+	which nettest >/dev/null
+	if [ $? -ne 0 ]; then
+		log_error "nettest not found; skipping tests"
+		return
+	fi
+
+	log_subsection "No VRF"
+	setup
+
+	# tcp_l3mdev_accept should have no affect without VRF;
+	# run tests with it enabled and disabled to verify
+	log_subsection "tcp_l3mdev_accept disabled"
+	set_sysctl net.ipv4.tcp_l3mdev_accept=0
+	ipv4_tcp_novrf
+	log_subsection "tcp_l3mdev_accept enabled"
+	set_sysctl net.ipv4.tcp_l3mdev_accept=1
+	ipv4_tcp_novrf
+
+	log_subsection "With VRF"
+	setup "yes"
+	ipv4_tcp_vrf
+}
+
+################################################################################
 # IPv6
 
 ipv6_ping_novrf()
@@ -1012,7 +1323,7 @@ EOF
 ################################################################################
 # main
 
-TESTS_IPV4="ipv4_ping"
+TESTS_IPV4="ipv4_ping ipv4_tcp"
 TESTS_IPV6="ipv6_ping"
 PAUSE_ON_FAIL=no
 PAUSE=no
@@ -1052,6 +1363,8 @@ for t in $TESTS
 do
 	case $t in
 	ipv4_ping|ping)  ipv4_ping;;
+	ipv4_tcp|tcp)    ipv4_tcp;;
+
 	ipv6_ping|ping6) ipv6_ping;;
 
 	# setup namespaces and config, but do not run any tests