diff options
Diffstat (limited to '')
| -rw-r--r-- | include/asm-powerpc/uaccess.h | 504 | ||||
| -rw-r--r-- | include/asm-ppc/uaccess.h | 393 | ||||
| -rw-r--r-- | include/asm-ppc64/uaccess.h | 341 |
3 files changed, 504 insertions, 734 deletions
diff --git a/include/asm-powerpc/uaccess.h b/include/asm-powerpc/uaccess.h new file mode 100644 index 000000000000..2ecc3e16e49e --- /dev/null +++ b/include/asm-powerpc/uaccess.h @@ -0,0 +1,504 @@ +#ifndef _ARCH_POWERPC_UACCESS_H +#define _ARCH_POWERPC_UACCESS_H + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +#include <linux/sched.h> +#include <linux/errno.h> +#include <asm/processor.h> + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + * + * The fs/ds values are now the highest legal address in the "segment". + * This simplifies the checking in the routines below. + */ + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + +#ifdef __powerpc64__ +#define KERNEL_DS MAKE_MM_SEG(0UL) +#define USER_DS MAKE_MM_SEG(0xf000000000000000UL) +#else +#define KERNEL_DS MAKE_MM_SEG(~0UL) +#define USER_DS MAKE_MM_SEG(TASK_SIZE - 1) +#endif + +#define get_ds() (KERNEL_DS) +#define get_fs() (current->thread.fs) +#define set_fs(val) (current->thread.fs = (val)) + +#define segment_eq(a, b) ((a).seg == (b).seg) + +#ifdef __powerpc64__ +/* + * Use the alpha trick for checking ranges: + * + * Is a address valid? This does a straightforward calculation rather + * than tests. + * + * Address valid if: + * - "addr" doesn't have any high-bits set + * - AND "size" doesn't have any high-bits set + * - OR we are in kernel mode. + * + * We dont have to check for high bits in (addr+size) because the first + * two checks force the maximum result to be below the start of the + * kernel region. + */ +#define __access_ok(addr, size, segment) \ + (((segment).seg & (addr | size )) == 0) + +#else + +#define __access_ok(addr, size, segment) \ + (((addr) <= (segment).seg) && \ + (((size) == 0) || (((size) - 1) <= ((segment).seg - (addr))))) + +#endif + +#define access_ok(type, addr, size) \ + (__chk_user_ptr(addr), \ + __access_ok((__force unsigned long)(addr), (size), get_fs())) + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry { + unsigned long insn; + unsigned long fixup; +}; + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + * + * This gets kind of ugly. We want to return _two_ values in "get_user()" + * and yet we don't want to do any pointers, because that is too much + * of a performance impact. Thus we have a few rather ugly macros here, + * and hide all the ugliness from the user. + * + * The "__xxx" versions of the user access functions are versions that + * do not verify the address space, that must have been done previously + * with a separate "access_ok()" call (this is used when we do multiple + * accesses to the same area of user memory). + * + * As we use the same address space for kernel and user data on the + * PowerPC, we can just do these as direct assignments. (Of course, the + * exception handling means that it's no longer "just"...) + * + * The "user64" versions of the user access functions are versions that + * allow access of 64-bit data. The "get_user" functions do not + * properly handle 64-bit data because the value gets down cast to a long. + * The "put_user" functions already handle 64-bit data properly but we add + * "user64" versions for completeness + */ +#define get_user(x, ptr) \ + __get_user_check((x), (ptr), sizeof(*(ptr))) +#define put_user(x, ptr) \ + __put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) + +#define __get_user(x, ptr) \ + __get_user_nocheck((x), (ptr), sizeof(*(ptr))) +#define __put_user(x, ptr) \ + __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) +#ifndef __powerpc64__ +#define __get_user64(x, ptr) \ + __get_user64_nocheck((x), (ptr), sizeof(*(ptr))) +#define __put_user64(x, ptr) __put_user(x, ptr) +#endif + +#ifdef __powerpc64__ +#define __get_user_unaligned __get_user +#define __put_user_unaligned __put_user +#endif + +extern long __put_user_bad(void); + +#ifdef __powerpc64__ +#define __EX_TABLE_ALIGN "3" +#define __EX_TABLE_TYPE "llong" +#else +#define __EX_TABLE_ALIGN "2" +#define __EX_TABLE_TYPE "long" +#endif + +/* + * We don't tell gcc that we are accessing memory, but this is OK + * because we do not write to any memory gcc knows about, so there + * are no aliasing issues. + */ +#define __put_user_asm(x, addr, err, op) \ + __asm__ __volatile__( \ + "1: " op " %1,0(%2) # put_user\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,%3\n" \ + " b 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .align " __EX_TABLE_ALIGN "\n" \ + " ."__EX_TABLE_TYPE" 1b,3b\n" \ + ".previous" \ + : "=r" (err) \ + : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) + +#ifndef __powerpc64__ +#define __put_user_asm2(x, addr, err) \ + __asm__ __volatile__( \ + "1: stw %1,0(%2)\n" \ + "2: stw %1+1,4(%2)\n" \ + "3:\n" \ + ".section .fixup,\"ax\"\n" \ + "4: li %0,%3\n" \ + " b 3b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .align " __EX_TABLE_ALIGN "\n" \ + " ." __EX_TABLE_TYPE " 1b,4b\n" \ + " ." __EX_TABLE_TYPE " 2b,4b\n" \ + ".previous" \ + : "=r" (err) \ + : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) +#else /* __powerpc64__ */ +#define __put_user_asm2(x, ptr, retval) \ + __put_user_asm(x, ptr, retval, "std") +#endif /* __powerpc64__ */ + +#define __put_user_size(x, ptr, size, retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: __put_user_asm(x, ptr, retval, "stb"); break; \ + case 2: __put_user_asm(x, ptr, retval, "sth"); break; \ + case 4: __put_user_asm(x, ptr, retval, "stw"); break; \ + case 8: __put_user_asm2(x, ptr, retval); break; \ + default: __put_user_bad(); \ + } \ +} while (0) + +#define __put_user_nocheck(x, ptr, size) \ +({ \ + long __pu_err; \ + might_sleep(); \ + __chk_user_ptr(ptr); \ + __put_user_size((x), (ptr), (size), __pu_err); \ + __pu_err; \ +}) + +#define __put_user_check(x, ptr, size) \ +({ \ + long __pu_err = -EFAULT; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + might_sleep(); \ + if (access_ok(VERIFY_WRITE, __pu_addr, size)) \ + __put_user_size((x), __pu_addr, (size), __pu_err); \ + __pu_err; \ +}) + +extern long __get_user_bad(void); + +#define __get_user_asm(x, addr, err, op) \ + __asm__ __volatile__( \ + "1: "op" %1,0(%2) # get_user\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,%3\n" \ + " li %1,0\n" \ + " b 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .align "__EX_TABLE_ALIGN "\n" \ + " ." __EX_TABLE_TYPE " 1b,3b\n" \ + ".previous" \ + : "=r" (err), "=r" (x) \ + : "b" (addr), "i" (-EFAULT), "0" (err)) + +#ifndef __powerpc64__ +#define __get_user_asm2(x, addr, err) \ + __asm__ __volatile__( \ + "1: lwz %1,0(%2)\n" \ + "2: lwz %1+1,4(%2)\n" \ + "3:\n" \ + ".section .fixup,\"ax\"\n" \ + "4: li %0,%3\n" \ + " li %1,0\n" \ + " li %1+1,0\n" \ + " b 3b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .align " __EX_TABLE_ALIGN "\n" \ + " ." __EX_TABLE_TYPE " 1b,4b\n" \ + " ." __EX_TABLE_TYPE " 2b,4b\n" \ + ".previous" \ + : "=r" (err), "=&r" (x) \ + : "b" (addr), "i" (-EFAULT), "0" (err)) +#else +#define __get_user_asm2(x, addr, err) \ + __get_user_asm(x, addr, err, "ld") +#endif /* __powerpc64__ */ + +#define __get_user_size(x, ptr, size, retval) \ +do { \ + retval = 0; \ + __chk_user_ptr(ptr); \ + if (size > sizeof(x)) \ + (x) = __get_user_bad(); \ + switch (size) { \ + case 1: __get_user_asm(x, ptr, retval, "lbz"); break; \ + case 2: __get_user_asm(x, ptr, retval, "lhz"); break; \ + case 4: __get_user_asm(x, ptr, retval, "lwz"); break; \ + case 8: __get_user_asm2(x, ptr, retval); break; \ + default: (x) = __get_user_bad(); \ + } \ +} while (0) + +#define __get_user_nocheck(x, ptr, size) \ +({ \ + long __gu_err; \ + unsigned long __gu_val; \ + __chk_user_ptr(ptr); \ + might_sleep(); \ + __get_user_size(__gu_val, (ptr), (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#ifndef __powerpc64__ +#define __get_user64_nocheck(x, ptr, size) \ +({ \ + long __gu_err; \ + long long __gu_val; \ + __chk_user_ptr(ptr); \ + might_sleep(); \ + __get_user_size(__gu_val, (ptr), (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) +#endif /* __powerpc64__ */ + +#define __get_user_check(x, ptr, size) \ +({ \ + long __gu_err = -EFAULT; \ + unsigned long __gu_val = 0; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + might_sleep(); \ + if (access_ok(VERIFY_READ, __gu_addr, (size))) \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +/* more complex routines */ + +extern unsigned long __copy_tofrom_user(void __user *to, + const void __user *from, unsigned long size); + +#ifndef __powerpc64__ +extern inline unsigned long +copy_from_user(void *to, const void __user *from, unsigned long n) +{ + unsigned long over; + + if (access_ok(VERIFY_READ, from, n)) + return __copy_tofrom_user((__force void __user *)to, from, n); + if ((unsigned long)from < TASK_SIZE) { + over = (unsigned long)from + n - TASK_SIZE; + return __copy_tofrom_user((__force void __user *)to, from, + n - over) + over; + } + return n; +} + +extern inline unsigned long +copy_to_user(void __user *to, const void *from, unsigned long n) +{ + unsigned long over; + + if (access_ok(VERIFY_WRITE, to, n)) + return __copy_tofrom_user(to, (__force void __user *)from, n); + if ((unsigned long)to < TASK_SIZE) { + over = (unsigned long)to + n - TASK_SIZE; + return __copy_tofrom_user(to, (__force void __user *)from, + n - over) + over; + } + return n; +} + +#else /* __powerpc64__ */ + +static inline unsigned long +__copy_from_user_inatomic(void *to, const void __user *from, unsigned long n) +{ + if (__builtin_constant_p(n) && (n <= 8)) { + unsigned long ret; + + switch (n) { + case 1: + __get_user_size(*(u8 *)to, from, 1, ret); + break; + case 2: + __get_user_size(*(u16 *)to, from, 2, ret); + break; + case 4: + __get_user_size(*(u32 *)to, from, 4, ret); + break; + case 8: + __get_user_size(*(u64 *)to, from, 8, ret); + break; + } + return (ret == -EFAULT) ? n : 0; + } + return __copy_tofrom_user((__force void __user *) to, from, n); +} + +static inline unsigned long +__copy_to_user_inatomic(void __user *to, const void *from, unsigned long n) +{ + if (__builtin_constant_p(n) && (n <= 8)) { + unsigned long ret; + + switch (n) { + case 1: + __put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret); + break; + case 2: + __put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret); + break; + case 4: + __put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret); + break; + case 8: + __put_user_size(*(u64 *)from, (u64 __user *)to, 8, ret); + break; + } + return (ret == -EFAULT) ? n : 0; + } + return __copy_tofrom_user(to, (__force const void __user *) from, n); +} + +#endif /* __powerpc64__ */ + +static inline unsigned long +__copy_from_user(void *to, const void __user *from, unsigned long size) +{ + might_sleep(); +#ifndef __powerpc64__ + return __copy_tofrom_user((__force void __user *)to, from, size); +#else /* __powerpc64__ */ + return __copy_from_user_inatomic(to, from, size); +#endif /* __powerpc64__ */ +} + +static inline unsigned long +__copy_to_user(void __user *to, const void *from, unsigned long size) +{ + might_sleep(); +#ifndef __powerpc64__ + return __copy_tofrom_user(to, (__force void __user *)from, size); +#else /* __powerpc64__ */ + return __copy_to_user_inatomic(to, from, size); +#endif /* __powerpc64__ */ +} + +#ifndef __powerpc64__ +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user +#else /* __powerpc64__ */ +#define __copy_in_user(to, from, size) \ + __copy_tofrom_user((to), (from), (size)) + +extern unsigned long copy_from_user(void *to, const void __user *from, + unsigned long n); +extern unsigned long copy_to_user(void __user *to, const void *from, + unsigned long n); +extern unsigned long copy_in_user(void __user *to, const void __user *from, + unsigned long n); +#endif /* __powerpc64__ */ + +extern unsigned long __clear_user(void __user *addr, unsigned long size); + +static inline unsigned long clear_user(void __user *addr, unsigned long size) +{ + might_sleep(); + if (likely(access_ok(VERIFY_WRITE, addr, size))) + return __clear_user(addr, size); +#ifndef __powerpc64__ + if ((unsigned long)addr < TASK_SIZE) { + unsigned long over = (unsigned long)addr + size - TASK_SIZE; + return __clear_user(addr, size - over) + over; + } +#endif /* __powerpc64__ */ + return size; +} + +extern int __strncpy_from_user(char *dst, const char __user *src, long count); + +static inline long strncpy_from_user(char *dst, const char __user *src, + long count) +{ + might_sleep(); + if (likely(access_ok(VERIFY_READ, src, 1))) + return __strncpy_from_user(dst, src, count); + return -EFAULT; +} + +/* + * Return the size of a string (including the ending 0) + * + * Return 0 for error + */ +#ifndef __powerpc64__ +extern int __strnlen_user(const char __user *str, long len, unsigned long top); +#else /* __powerpc64__ */ +extern int __strnlen_user(const char __user *str, long len); +#endif /* __powerpc64__ */ + +/* + * Returns the length of the string at str (including the null byte), + * or 0 if we hit a page we can't access, + * or something > len if we didn't find a null byte. + * + * The `top' parameter to __strnlen_user is to make sure that + * we can never overflow from the user area into kernel space. + */ +static inline int strnlen_user(const char __user *str, long len) +{ +#ifndef __powerpc64__ + unsigned long top = current->thread.fs.seg; + + if ((unsigned long)str > top) + return 0; + return __strnlen_user(str, len, top); +#else /* __powerpc64__ */ + might_sleep(); + if (likely(access_ok(VERIFY_READ, str, 1))) + return __strnlen_user(str, len); + return 0; +#endif /* __powerpc64__ */ +} + +#define strlen_user(str) strnlen_user((str), 0x7ffffffe) + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ + +#endif /* _ARCH_POWERPC_UACCESS_H */ diff --git a/include/asm-ppc/uaccess.h b/include/asm-ppc/uaccess.h deleted file mode 100644 index 63f56224da8c..000000000000 --- a/include/asm-ppc/uaccess.h +++ /dev/null @@ -1,393 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _PPC_UACCESS_H -#define _PPC_UACCESS_H - -#ifndef __ASSEMBLY__ -#include <linux/sched.h> -#include <linux/errno.h> -#include <asm/processor.h> - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - * - * The fs/ds values are now the highest legal address in the "segment". - * This simplifies the checking in the routines below. - */ - -#define KERNEL_DS ((mm_segment_t) { ~0UL }) -#define USER_DS ((mm_segment_t) { TASK_SIZE - 1 }) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current->thread.fs) -#define set_fs(val) (current->thread.fs = (val)) - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#define __access_ok(addr,size) \ - ((addr) <= current->thread.fs.seg \ - && ((size) == 0 || (size) - 1 <= current->thread.fs.seg - (addr))) - -#define access_ok(type, addr, size) \ - (__chk_user_ptr(addr),__access_ok((unsigned long)(addr),(size))) - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - * - * This gets kind of ugly. We want to return _two_ values in "get_user()" - * and yet we don't want to do any pointers, because that is too much - * of a performance impact. Thus we have a few rather ugly macros here, - * and hide all the ugliness from the user. - * - * The "__xxx" versions of the user access functions are versions that - * do not verify the address space, that must have been done previously - * with a separate "access_ok()" call (this is used when we do multiple - * accesses to the same area of user memory). - * - * As we use the same address space for kernel and user data on the - * PowerPC, we can just do these as direct assignments. (Of course, the - * exception handling means that it's no longer "just"...) - * - * The "user64" versions of the user access functions are versions that - * allow access of 64-bit data. The "get_user" functions do not - * properly handle 64-bit data because the value gets down cast to a long. - * The "put_user" functions already handle 64-bit data properly but we add - * "user64" versions for completeness - */ -#define get_user(x,ptr) \ - __get_user_check((x),(ptr),sizeof(*(ptr))) -#define get_user64(x,ptr) \ - __get_user64_check((x),(ptr),sizeof(*(ptr))) -#define put_user(x,ptr) \ - __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) -#define put_user64(x,ptr) put_user(x,ptr) - -#define __get_user(x,ptr) \ - __get_user_nocheck((x),(ptr),sizeof(*(ptr))) -#define __get_user64(x,ptr) \ - __get_user64_nocheck((x),(ptr),sizeof(*(ptr))) -#define __put_user(x,ptr) \ - __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) -#define __put_user64(x,ptr) __put_user(x,ptr) - -extern long __put_user_bad(void); - -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - __chk_user_ptr(ptr); \ - __put_user_size((x),(ptr),(size),__pu_err); \ - __pu_err; \ -}) - -#define __put_user_check(x,ptr,size) \ -({ \ - long __pu_err = -EFAULT; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - if (access_ok(VERIFY_WRITE,__pu_addr,size)) \ - __put_user_size((x),__pu_addr,(size),__pu_err); \ - __pu_err; \ -}) - -#define __put_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - __put_user_asm(x, ptr, retval, "stb"); \ - break; \ - case 2: \ - __put_user_asm(x, ptr, retval, "sth"); \ - break; \ - case 4: \ - __put_user_asm(x, ptr, retval, "stw"); \ - break; \ - case 8: \ - __put_user_asm2(x, ptr, retval); \ - break; \ - default: \ - __put_user_bad(); \ - } \ -} while (0) - -/* - * We don't tell gcc that we are accessing memory, but this is OK - * because we do not write to any memory gcc knows about, so there - * are no aliasing issues. - */ -#define __put_user_asm(x, addr, err, op) \ - __asm__ __volatile__( \ - "1: "op" %1,0(%2)\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,%3\n" \ - " b 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,3b\n" \ - ".previous" \ - : "=r" (err) \ - : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) - -#define __put_user_asm2(x, addr, err) \ - __asm__ __volatile__( \ - "1: stw %1,0(%2)\n" \ - "2: stw %1+1,4(%2)\n" \ - "3:\n" \ - ".section .fixup,\"ax\"\n" \ - "4: li %0,%3\n" \ - " b 3b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,4b\n" \ - " .long 2b,4b\n" \ - ".previous" \ - : "=r" (err) \ - : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) - -#define __get_user_nocheck(x, ptr, size) \ -({ \ - long __gu_err; \ - unsigned long __gu_val; \ - __chk_user_ptr(ptr); \ - __get_user_size(__gu_val, (ptr), (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user64_nocheck(x, ptr, size) \ -({ \ - long __gu_err; \ - long long __gu_val; \ - __chk_user_ptr(ptr); \ - __get_user_size64(__gu_val, (ptr), (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x, ptr, size) \ -({ \ - long __gu_err = -EFAULT; \ - unsigned long __gu_val = 0; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - if (access_ok(VERIFY_READ, __gu_addr, (size))) \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user64_check(x, ptr, size) \ -({ \ - long __gu_err = -EFAULT; \ - long long __gu_val = 0; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - if (access_ok(VERIFY_READ, __gu_addr, (size))) \ - __get_user_size64(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -extern long __get_user_bad(void); - -#define __get_user_size(x, ptr, size, retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - __get_user_asm(x, ptr, retval, "lbz"); \ - break; \ - case 2: \ - __get_user_asm(x, ptr, retval, "lhz"); \ - break; \ - case 4: \ - __get_user_asm(x, ptr, retval, "lwz"); \ - break; \ - default: \ - x = __get_user_bad(); \ - } \ -} while (0) - -#define __get_user_size64(x, ptr, size, retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - __get_user_asm(x, ptr, retval, "lbz"); \ - break; \ - case 2: \ - __get_user_asm(x, ptr, retval, "lhz"); \ - break; \ - case 4: \ - __get_user_asm(x, ptr, retval, "lwz"); \ - break; \ - case 8: \ - __get_user_asm2(x, ptr, retval); \ - break; \ - default: \ - x = __get_user_bad(); \ - } \ -} while (0) - -#define __get_user_asm(x, addr, err, op) \ - __asm__ __volatile__( \ - "1: "op" %1,0(%2)\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,%3\n" \ - " li %1,0\n" \ - " b 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,3b\n" \ - ".previous" \ - : "=r"(err), "=r"(x) \ - : "b"(addr), "i"(-EFAULT), "0"(err)) - -#define __get_user_asm2(x, addr, err) \ - __asm__ __volatile__( \ - "1: lwz %1,0(%2)\n" \ - "2: lwz %1+1,4(%2)\n" \ - "3:\n" \ - ".section .fixup,\"ax\"\n" \ - "4: li %0,%3\n" \ - " li %1,0\n" \ - " li %1+1,0\n" \ - " b 3b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,4b\n" \ - " .long 2b,4b\n" \ - ".previous" \ - : "=r"(err), "=&r"(x) \ - : "b"(addr), "i"(-EFAULT), "0"(err)) - -/* more complex routines */ - -extern int __copy_tofrom_user(void __user *to, const void __user *from, - unsigned long size); - -extern inline unsigned long -copy_from_user(void *to, const void __user *from, unsigned long n) -{ - unsigned long over; - - if (access_ok(VERIFY_READ, from, n)) - return __copy_tofrom_user((__force void __user *)to, from, n); - if ((unsigned long)from < TASK_SIZE) { - over = (unsigned long)from + n - TASK_SIZE; - return __copy_tofrom_user((__force void __user *)to, from, n - over) + over; - } - return n; -} - -extern inline unsigned long -copy_to_user(void __user *to, const void *from, unsigned long n) -{ - unsigned long over; - - if (access_ok(VERIFY_WRITE, to, n)) - return __copy_tofrom_user(to, (__force void __user *) from, n); - if ((unsigned long)to < TASK_SIZE) { - over = (unsigned long)to + n - TASK_SIZE; - return __copy_tofrom_user(to, (__force void __user *) from, n - over) + over; - } - return n; -} - -static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long size) -{ - return __copy_tofrom_user((__force void __user *)to, from, size); -} - -static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long size) -{ - return __copy_tofrom_user(to, (__force void __user *)from, size); -} - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -extern unsigned long __clear_user(void __user *addr, unsigned long size); - -extern inline unsigned long -clear_user(void __user *addr, unsigned long size) -{ - if (access_ok(VERIFY_WRITE, addr, size)) - return __clear_user(addr, size); - if ((unsigned long)addr < TASK_SIZE) { - unsigned long over = (unsigned long)addr + size - TASK_SIZE; - return __clear_user(addr, size - over) + over; - } - return size; -} - -extern int __strncpy_from_user(char *dst, const char __user *src, long count); - -extern inline long -strncpy_from_user(char *dst, const char __user *src, long count) -{ - if (access_ok(VERIFY_READ, src, 1)) - return __strncpy_from_user(dst, src, count); - return -EFAULT; -} - -/* - * Return the size of a string (including the ending 0) - * - * Return 0 for error - */ - -extern int __strnlen_user(const char __user *str, long len, unsigned long top); - -/* - * Returns the length of the string at str (including the null byte), - * or 0 if we hit a page we can't access, - * or something > len if we didn't find a null byte. - * - * The `top' parameter to __strnlen_user is to make sure that - * we can never overflow from the user area into kernel space. - */ -extern __inline__ int strnlen_user(const char __user *str, long len) -{ - unsigned long top = current->thread.fs.seg; - - if ((unsigned long)str > top) - return 0; - return __strnlen_user(str, len, top); -} - -#define strlen_user(str) strnlen_user((str), 0x7ffffffe) - -#endif /* __ASSEMBLY__ */ - -#endif /* _PPC_UACCESS_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc64/uaccess.h b/include/asm-ppc64/uaccess.h deleted file mode 100644 index 132c1276547b..000000000000 --- a/include/asm-ppc64/uaccess.h +++ /dev/null @@ -1,341 +0,0 @@ -#ifndef _PPC64_UACCESS_H -#define _PPC64_UACCESS_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __ASSEMBLY__ -#include <linux/sched.h> -#include <linux/errno.h> -#include <asm/processor.h> - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#define KERNEL_DS MAKE_MM_SEG(0UL) -#define USER_DS MAKE_MM_SEG(0xf000000000000000UL) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current->thread.fs) -#define set_fs(val) (current->thread.fs = (val)) - -#define segment_eq(a,b) ((a).seg == (b).seg) - -/* - * Use the alpha trick for checking ranges: - * - * Is a address valid? This does a straightforward calculation rather - * than tests. - * - * Address valid if: - * - "addr" doesn't have any high-bits set - * - AND "size" doesn't have any high-bits set - * - OR we are in kernel mode. - * - * We dont have to check for high bits in (addr+size) because the first - * two checks force the maximum result to be below the start of the - * kernel region. - */ -#define __access_ok(addr,size,segment) \ - (((segment).seg & (addr | size )) == 0) - -#define access_ok(type,addr,size) \ - __access_ok(((__force unsigned long)(addr)),(size),get_fs()) - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -/* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_exception_table(unsigned long); - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - * - * This gets kind of ugly. We want to return _two_ values in "get_user()" - * and yet we don't want to do any pointers, because that is too much - * of a performance impact. Thus we have a few rather ugly macros here, - * and hide all the ugliness from the user. - * - * The "__xxx" versions of the user access functions are versions that - * do not verify the address space, that must have been done previously - * with a separate "access_ok()" call (this is used when we do multiple - * accesses to the same area of user memory). - * - * As we use the same address space for kernel and user data on the - * PowerPC, we can just do these as direct assignments. (Of course, the - * exception handling means that it's no longer "just"...) - */ -#define get_user(x,ptr) \ - __get_user_check((x),(ptr),sizeof(*(ptr))) -#define put_user(x,ptr) \ - __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) - -#define __get_user(x,ptr) \ - __get_user_nocheck((x),(ptr),sizeof(*(ptr))) -#define __put_user(x,ptr) \ - __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) - -#define __get_user_unaligned __get_user -#define __put_user_unaligned __put_user - -extern long __put_user_bad(void); - -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - might_sleep(); \ - __chk_user_ptr(ptr); \ - __put_user_size((x),(ptr),(size),__pu_err,-EFAULT); \ - __pu_err; \ -}) - -#define __put_user_check(x,ptr,size) \ -({ \ - long __pu_err = -EFAULT; \ - void __user *__pu_addr = (ptr); \ - might_sleep(); \ - if (access_ok(VERIFY_WRITE,__pu_addr,size)) \ - __put_user_size((x),__pu_addr,(size),__pu_err,-EFAULT); \ - __pu_err; \ -}) - -#define __put_user_size(x,ptr,size,retval,errret) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: __put_user_asm(x,ptr,retval,"stb",errret); break; \ - case 2: __put_user_asm(x,ptr,retval,"sth",errret); break; \ - case 4: __put_user_asm(x,ptr,retval,"stw",errret); break; \ - case 8: __put_user_asm(x,ptr,retval,"std",errret); break; \ - default: __put_user_bad(); \ - } \ -} while (0) - -/* - * We don't tell gcc that we are accessing memory, but this is OK - * because we do not write to any memory gcc knows about, so there - * are no aliasing issues. - */ -#define __put_user_asm(x, addr, err, op, errret) \ - __asm__ __volatile__( \ - "1: "op" %1,0(%2) # put_user\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,%3\n" \ - " b 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .llong 1b,3b\n" \ - ".previous" \ - : "=r"(err) \ - : "r"(x), "b"(addr), "i"(errret), "0"(err)) - - -#define __get_user_nocheck(x,ptr,size) \ -({ \ - long __gu_err; \ - unsigned long __gu_val; \ - might_sleep(); \ - __get_user_size(__gu_val,(ptr),(size),__gu_err,-EFAULT);\ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x,ptr,size) \ -({ \ - long __gu_err = -EFAULT; \ - unsigned long __gu_val = 0; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - might_sleep(); \ - if (access_ok(VERIFY_READ,__gu_addr,size)) \ - __get_user_size(__gu_val,__gu_addr,(size),__gu_err,-EFAULT);\ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -extern long __get_user_bad(void); - -#define __get_user_size(x,ptr,size,retval,errret) \ -do { \ - retval = 0; \ - __chk_user_ptr(ptr); \ - switch (size) { \ - case 1: __get_user_asm(x,ptr,retval,"lbz",errret); break; \ - case 2: __get_user_asm(x,ptr,retval,"lhz",errret); break; \ - case 4: __get_user_asm(x,ptr,retval,"lwz",errret); break; \ - case 8: __get_user_asm(x,ptr,retval,"ld",errret); break; \ - default: (x) = __get_user_bad(); \ - } \ -} while (0) - -#define __get_user_asm(x, addr, err, op, errret) \ - __asm__ __volatile__( \ - "1: "op" %1,0(%2) # get_user\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,%3\n" \ - " li %1,0\n" \ - " b 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .llong 1b,3b\n" \ - ".previous" \ - : "=r"(err), "=r"(x) \ - : "b"(addr), "i"(errret), "0"(err)) - -/* more complex routines */ - -extern unsigned long __copy_tofrom_user(void __user *to, const void __user *from, - unsigned long size); - -static inline unsigned long -__copy_from_user_inatomic(void *to, const void __user *from, unsigned long n) -{ - if (__builtin_constant_p(n)) { - unsigned long ret; - - switch (n) { - case 1: - __get_user_size(*(u8 *)to, from, 1, ret, 1); - return ret; - case 2: - __get_user_size(*(u16 *)to, from, 2, ret, 2); - return ret; - case 4: - __get_user_size(*(u32 *)to, from, 4, ret, 4); - return ret; - case 8: - __get_user_size(*(u64 *)to, from, 8, ret, 8); - return ret; - } - } - return __copy_tofrom_user((__force void __user *) to, from, n); -} - -static inline unsigned long -__copy_from_user(void *to, const void __user *from, unsigned long n) -{ - might_sleep(); - return __copy_from_user_inatomic(to, from, n); -} - -static inline unsigned long -__copy_to_user_inatomic(void __user *to, const void *from, unsigned long n) -{ - if (__builtin_constant_p(n)) { - unsigned long ret; - - switch (n) { - case 1: - __put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret, 1); - return ret; - case 2: - __put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret, 2); - return ret; - case 4: - __put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret, 4); - return ret; - case 8: - __put_user_size(*(u64 *)from, (u64 __user *)to, 8, ret, 8); - return ret; - } - } - return __copy_tofrom_user(to, (__force const void __user *) from, n); -} - -static inline unsigned long -__copy_to_user(void __user *to, const void *from, unsigned long n) -{ - might_sleep(); - return __copy_to_user_inatomic(to, from, n); -} - -#define __copy_in_user(to, from, size) \ - __copy_tofrom_user((to), (from), (size)) - -extern unsigned long copy_from_user(void *to, const void __user *from, - unsigned long n); -extern unsigned long copy_to_user(void __user *to, const void *from, - unsigned long n); -extern unsigned long copy_in_user(void __user *to, const void __user *from, - unsigned long n); - -extern unsigned long __clear_user(void __user *addr, unsigned long size); - -static inline unsigned long -clear_user(void __user *addr, unsigned long size) -{ - might_sleep(); - if (likely(access_ok(VERIFY_WRITE, addr, size))) - size = __clear_user(addr, size); - return size; -} - -extern int __strncpy_from_user(char *dst, const char __user *src, long count); - -static inline long -strncpy_from_user(char *dst, const char __user *src, long count) -{ - might_sleep(); - if (likely(access_ok(VERIFY_READ, src, 1))) - return __strncpy_from_user(dst, src, count); - return -EFAULT; -} - -/* - * Return the size of a string (including the ending 0) - * - * Return 0 for error - */ -extern int __strnlen_user(const char __user *str, long len); - -/* - * Returns the length of the string at str (including the null byte), - * or 0 if we hit a page we can't access, - * or something > len if we didn't find a null byte. - */ -static inline int strnlen_user(const char __user *str, long len) -{ - might_sleep(); - if (likely(access_ok(VERIFY_READ, str, 1))) - return __strnlen_user(str, len); - return 0; -} - -#define strlen_user(str) strnlen_user((str), 0x7ffffffe) - -#endif /* __ASSEMBLY__ */ - -#endif /* _PPC64_UACCESS_H */ |