aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/l2c2x0.txt114
-rw-r--r--Documentation/devicetree/bindings/arm/l2c2x0.yaml248
-rw-r--r--Documentation/devicetree/bindings/display/sitronix,st7735r.txt2
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt175
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml279
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt171
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml223
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt2
-rw-r--r--drivers/media/platform/s5p-mfc/s5p_mfc.c7
-rw-r--r--drivers/of/of_reserved_mem.c6
-rw-r--r--drivers/of/unittest.c15
-rw-r--r--include/linux/of_reserved_mem.h7
-rwxr-xr-xscripts/dtc/dtx_diff13
13 files changed, 786 insertions, 476 deletions
diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.txt b/Documentation/devicetree/bindings/arm/l2c2x0.txt
deleted file mode 100644
index fbe6cb21f4cf..000000000000
--- a/Documentation/devicetree/bindings/arm/l2c2x0.txt
+++ /dev/null
@@ -1,114 +0,0 @@
-* ARM L2 Cache Controller
-
-ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/PL220/
-PL310 and variants) based level 2 cache controller. All these various implementations
-of the L2 cache controller have compatible programming models (Note 1).
-Some of the properties that are just prefixed "cache-*" are taken from section
-3.7.3 of the Devicetree Specification which can be found at:
-https://www.devicetree.org/specifications/
-
-The ARM L2 cache representation in the device tree should be done as follows:
-
-Required properties:
-
-- compatible : should be one of:
- "arm,pl310-cache"
- "arm,l220-cache"
- "arm,l210-cache"
- "bcm,bcm11351-a2-pl310-cache": DEPRECATED by "brcm,bcm11351-a2-pl310-cache"
- "brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an
- offset needs to be added to the address before passing down to the L2
- cache controller
- "marvell,aurora-system-cache": Marvell Controller designed to be
- compatible with the ARM one, with system cache mode (meaning
- maintenance operations on L1 are broadcasted to the L2 and L2
- performs the same operation).
- "marvell,aurora-outer-cache": Marvell Controller designed to be
- compatible with the ARM one with outer cache mode.
- "marvell,tauros3-cache": Marvell Tauros3 cache controller, compatible
- with arm,pl310-cache controller.
-- cache-unified : Specifies the cache is a unified cache.
-- cache-level : Should be set to 2 for a level 2 cache.
-- reg : Physical base address and size of cache controller's memory mapped
- registers.
-
-Optional properties:
-
-- arm,data-latency : Cycles of latency for Data RAM accesses. Specifies 3 cells of
- read, write and setup latencies. Minimum valid values are 1. Controllers
- without setup latency control should use a value of 0.
-- arm,tag-latency : Cycles of latency for Tag RAM accesses. Specifies 3 cells of
- read, write and setup latencies. Controllers without setup latency control
- should use 0. Controllers without separate read and write Tag RAM latency
- values should only use the first cell.
-- arm,dirty-latency : Cycles of latency for Dirty RAMs. This is a single cell.
-- arm,filter-ranges : <start length> Starting address and length of window to
- filter. Addresses in the filter window are directed to the M1 port. Other
- addresses will go to the M0 port.
-- arm,io-coherent : indicates that the system is operating in an hardware
- I/O coherent mode. Valid only when the arm,pl310-cache compatible
- string is used.
-- interrupts : 1 combined interrupt.
-- cache-size : specifies the size in bytes of the cache
-- cache-sets : specifies the number of associativity sets of the cache
-- cache-block-size : specifies the size in bytes of a cache block
-- cache-line-size : specifies the size in bytes of a line in the cache,
- if this is not specified, the line size is assumed to be equal to the
- cache block size
-- cache-id-part: cache id part number to be used if it is not present
- on hardware
-- wt-override: If present then L2 is forced to Write through mode
-- arm,double-linefill : Override double linefill enable setting. Enable if
- non-zero, disable if zero.
-- arm,double-linefill-incr : Override double linefill on INCR read. Enable
- if non-zero, disable if zero.
-- arm,double-linefill-wrap : Override double linefill on WRAP read. Enable
- if non-zero, disable if zero.
-- arm,prefetch-drop : Override prefetch drop enable setting. Enable if non-zero,
- disable if zero.
-- arm,prefetch-offset : Override prefetch offset value. Valid values are
- 0-7, 15, 23, and 31.
-- arm,shared-override : The default behavior of the L220 or PL310 cache
- controllers with respect to the shareable attribute is to transform "normal
- memory non-cacheable transactions" into "cacheable no allocate" (for reads)
- or "write through no write allocate" (for writes).
- On systems where this may cause DMA buffer corruption, this property must be
- specified to indicate that such transforms are precluded.
-- arm,parity-enable : enable parity checking on the L2 cache (L220 or PL310).
-- arm,parity-disable : disable parity checking on the L2 cache (L220 or PL310).
-- arm,outer-sync-disable : disable the outer sync operation on the L2 cache.
- Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that
- will randomly hang unless outer sync operations are disabled.
-- prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1>
- (forcibly enable), property absent (retain settings set by firmware)
-- prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable),
- <1> (forcibly enable), property absent (retain settings set by
- firmware)
-- arm,dynamic-clock-gating : L2 dynamic clock gating. Value: <0> (forcibly
- disable), <1> (forcibly enable), property absent (OS specific behavior,
- preferably retain firmware settings)
-- arm,standby-mode: L2 standby mode enable. Value <0> (forcibly disable),
- <1> (forcibly enable), property absent (OS specific behavior,
- preferably retain firmware settings)
-- arm,early-bresp-disable : Disable the CA9 optimization Early BRESP (PL310)
-- arm,full-line-zero-disable : Disable the CA9 optimization Full line of zero
- write (PL310)
-
-Example:
-
-L2: cache-controller {
- compatible = "arm,pl310-cache";
- reg = <0xfff12000 0x1000>;
- arm,data-latency = <1 1 1>;
- arm,tag-latency = <2 2 2>;
- arm,filter-ranges = <0x80000000 0x8000000>;
- cache-unified;
- cache-level = <2>;
- interrupts = <45>;
-};
-
-Note 1: The description in this document doesn't apply to integrated L2
- cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These
- integrated L2 controllers are assumed to be all preconfigured by
- early secure boot code. Thus no need to deal with their configuration
- in the kernel at all.
diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.yaml b/Documentation/devicetree/bindings/arm/l2c2x0.yaml
new file mode 100644
index 000000000000..bfc5c185561c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/l2c2x0.yaml
@@ -0,0 +1,248 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/l2c2x0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM L2 Cache Controller
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+description: |+
+ ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/
+ PL220/PL310 and variants) based level 2 cache controller. All these various
+ implementations of the L2 cache controller have compatible programming
+ models (Note 1). Some of the properties that are just prefixed "cache-*" are
+ taken from section 3.7.3 of the Devicetree Specification which can be found
+ at:
+ https://www.devicetree.org/specifications/
+
+ Note 1: The description in this document doesn't apply to integrated L2
+ cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These
+ integrated L2 controllers are assumed to be all preconfigured by
+ early secure boot code. Thus no need to deal with their configuration
+ in the kernel at all.
+
+allOf:
+ - $ref: /schemas/cache-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - arm,pl310-cache
+ - arm,l220-cache
+ - arm,l210-cache
+ # DEPRECATED by "brcm,bcm11351-a2-pl310-cache"
+ - bcm,bcm11351-a2-pl310-cache
+ # For Broadcom bcm11351 chipset where an
+ # offset needs to be added to the address before passing down to the L2
+ # cache controller
+ - brcm,bcm11351-a2-pl310-cache
+ # Marvell Controller designed to be
+ # compatible with the ARM one, with system cache mode (meaning
+ # maintenance operations on L1 are broadcasted to the L2 and L2
+ # performs the same operation).
+ - marvell,aurora-system-cache
+ # Marvell Controller designed to be
+ # compatible with the ARM one with outer cache mode.
+ - marvell,aurora-outer-cache
+ # Marvell Tauros3 cache controller, compatible
+ # with arm,pl310-cache controller.
+ - marvell,tauros3-cache
+
+ cache-level:
+ const: 2
+
+ cache-unified: true
+ cache-size: true
+ cache-sets: true
+ cache-block-size: true
+ cache-line-size: true
+
+ reg:
+ maxItems: 1
+
+ arm,data-latency:
+ description: Cycles of latency for Data RAM accesses. Specifies 3 cells of
+ read, write and setup latencies. Minimum valid values are 1. Controllers
+ without setup latency control should use a value of 0.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - minItems: 2
+ maxItems: 3
+ items:
+ minimum: 0
+ maximum: 8
+
+ arm,tag-latency:
+ description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of
+ read, write and setup latencies. Controllers without setup latency control
+ should use 0. Controllers without separate read and write Tag RAM latency
+ values should only use the first cell.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - minItems: 1
+ maxItems: 3
+ items:
+ minimum: 0
+ maximum: 8
+
+ arm,dirty-latency:
+ description: Cycles of latency for Dirty RAMs. This is a single cell.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 1
+ maximum: 8
+
+ arm,filter-ranges:
+ description: <start length> Starting address and length of window to
+ filter. Addresses in the filter window are directed to the M1 port. Other
+ addresses will go to the M0 port.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - items:
+ minItems: 2
+ maxItems: 2
+
+ arm,io-coherent:
+ description: indicates that the system is operating in an hardware
+ I/O coherent mode. Valid only when the arm,pl310-cache compatible
+ string is used.
+ type: boolean
+
+ interrupts:
+ # Either a single combined interrupt or up to 9 individual interrupts
+ minItems: 1
+ maxItems: 9
+
+ cache-id-part:
+ description: cache id part number to be used if it is not present
+ on hardware
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ wt-override:
+ description: If present then L2 is forced to Write through mode
+ type: boolean
+
+ arm,double-linefill:
+ description: Override double linefill enable setting. Enable if
+ non-zero, disable if zero.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,double-linefill-incr:
+ description: Override double linefill on INCR read. Enable
+ if non-zero, disable if zero.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,double-linefill-wrap:
+ description: Override double linefill on WRAP read. Enable
+ if non-zero, disable if zero.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,prefetch-drop:
+ description: Override prefetch drop enable setting. Enable if non-zero,
+ disable if zero.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,prefetch-offset:
+ description: Override prefetch offset value.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31 ]
+
+ arm,shared-override:
+ description: The default behavior of the L220 or PL310 cache
+ controllers with respect to the shareable attribute is to transform "normal
+ memory non-cacheable transactions" into "cacheable no allocate" (for reads)
+ or "write through no write allocate" (for writes).
+ On systems where this may cause DMA buffer corruption, this property must
+ be specified to indicate that such transforms are precluded.
+ type: boolean
+
+ arm,parity-enable:
+ description: enable parity checking on the L2 cache (L220 or PL310).
+ type: boolean
+
+ arm,parity-disable:
+ description: disable parity checking on the L2 cache (L220 or PL310).
+ type: boolean
+
+ arm,outer-sync-disable:
+ description: disable the outer sync operation on the L2 cache.
+ Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that
+ will randomly hang unless outer sync operations are disabled.
+ type: boolean
+
+ prefetch-data:
+ description: |
+ Data prefetch. Value: <0> (forcibly disable), <1>
+ (forcibly enable), property absent (retain settings set by firmware)
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ prefetch-instr:
+ description: |
+ Instruction prefetch. Value: <0> (forcibly disable),
+ <1> (forcibly enable), property absent (retain settings set by
+ firmware)
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,dynamic-clock-gating:
+ description: |
+ L2 dynamic clock gating. Value: <0> (forcibly
+ disable), <1> (forcibly enable), property absent (OS specific behavior,
+ preferably retain firmware settings)
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,standby-mode:
+ description: L2 standby mode enable. Value <0> (forcibly disable),
+ <1> (forcibly enable), property absent (OS specific behavior,
+ preferably retain firmware settings)
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,early-bresp-disable:
+ description: Disable the CA9 optimization Early BRESP (PL310)
+ type: boolean
+
+ arm,full-line-zero-disable:
+ description: Disable the CA9 optimization Full line of zero
+ write (PL310)
+ type: boolean
+
+required:
+ - compatible
+ - cache-unified
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ cache-controller@fff12000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xfff12000 0x1000>;
+ arm,data-latency = <1 1 1>;
+ arm,tag-latency = <2 2 2>;
+ arm,filter-ranges = <0x80000000 0x8000000>;
+ cache-unified;
+ cache-level = <2>;
+ interrupts = <45>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/display/sitronix,st7735r.txt b/Documentation/devicetree/bindings/display/sitronix,st7735r.txt
index f0a5090a3326..cd5c7186890a 100644
--- a/Documentation/devicetree/bindings/display/sitronix,st7735r.txt
+++ b/Documentation/devicetree/bindings/display/sitronix,st7735r.txt
@@ -20,7 +20,7 @@ Example:
backlight: backlight {
compatible = "gpio-backlight";
gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
- }
+ };
...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
deleted file mode 100644
index a3be5298a5eb..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
+++ /dev/null
@@ -1,175 +0,0 @@
-* ARM Generic Interrupt Controller, version 3
-
-AArch64 SMP cores are often associated with a GICv3, providing Private
-Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
-Software Generated Interrupts (SGI), and Locality-specific Peripheral
-Interrupts (LPI).
-
-Main node required properties:
-
-- compatible : should at least contain "arm,gic-v3" or either
- "qcom,msm8996-gic-v3", "arm,gic-v3" for msm8996 SoCs
- to address SoC specific bugs/quirks
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
- interrupt source. Must be a single cell with a value of at least 3.
- If the system requires describing PPI affinity, then the value must
- be at least 4.
-
- The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
- interrupts. Other values are reserved for future use.
-
- The 2nd cell contains the interrupt number for the interrupt type.
- SPI interrupts are in the range [0-987]. PPI interrupts are in the
- range [0-15].
-
- The 3rd cell is the flags, encoded as follows:
- bits[3:0] trigger type and level flags.
- 1 = edge triggered
- 4 = level triggered
-
- The 4th cell is a phandle to a node describing a set of CPUs this
- interrupt is affine to. The interrupt must be a PPI, and the node
- pointed must be a subnode of the "ppi-partitions" subnode. For
- interrupt types other than PPI or PPIs that are not partitionned,
- this cell must be zero. See the "ppi-partitions" node description
- below.
-
- Cells 5 and beyond are reserved for future use and must have a value
- of 0 if present.
-
-- reg : Specifies base physical address(s) and size of the GIC
- registers, in the following order:
- - GIC Distributor interface (GICD)
- - GIC Redistributors (GICR), one range per redistributor region
- - GIC CPU interface (GICC)
- - GIC Hypervisor interface (GICH)
- - GIC Virtual CPU interface (GICV)
-
- GICC, GICH and GICV are optional.
-
-- interrupts : Interrupt source of the VGIC maintenance interrupt.
-
-Optional
-
-- redistributor-stride : If using padding pages, specifies the stride
- of consecutive redistributors. Must be a multiple of 64kB.
-
-- #redistributor-regions: The number of independent contiguous regions
- occupied by the redistributors. Required if more than one such
- region is present.
-
-- msi-controller: Boolean property. Identifies the node as an MSI
- controller. Only present if the Message Based Interrupt
- functionnality is being exposed by the HW, and the mbi-ranges
- property present.
-
-- mbi-ranges: A list of pairs <intid span>, where "intid" is the first
- SPI of a range that can be used an MBI, and "span" the size of that
- range. Multiple ranges can be provided. Requires "msi-controller" to
- be set.
-
-- mbi-alias: Address property. Base address of an alias of the GICD
- region containing only the {SET,CLR}SPI registers to be used if
- isolation is required, and if supported by the HW.
-
-Sub-nodes:
-
-PPI affinity can be expressed as a single "ppi-partitions" node,
-containing a set of sub-nodes, each with the following property:
-- affinity: Should be a list of phandles to CPU nodes (as described in
- Documentation/devicetree/bindings/arm/cpus.yaml).
-
-GICv3 has one or more Interrupt Translation Services (ITS) that are
-used to route Message Signalled Interrupts (MSI) to the CPUs.
-
-These nodes must have the following properties:
-- compatible : Should at least contain "arm,gic-v3-its".
-- msi-controller : Boolean property. Identifies the node as an MSI controller
-- #msi-cells: Must be <1>. The single msi-cell is the DeviceID of the device
- which will generate the MSI.
-- reg: Specifies the base physical address and size of the ITS
- registers.
-
-Optional:
-- socionext,synquacer-pre-its: (u32, u32) tuple describing the untranslated
- address and size of the pre-ITS window.
-
-The main GIC node must contain the appropriate #address-cells,
-#size-cells and ranges properties for the reg property of all ITS
-nodes.
-
-Examples:
-
- gic: interrupt-controller@2cf00000 {
- compatible = "arm,gic-v3";
- #interrupt-cells = <3>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- interrupt-controller;
- reg = <0x0 0x2f000000 0 0x10000>, // GICD
- <0x0 0x2f100000 0 0x200000>, // GICR
- <0x0 0x2c000000 0 0x2000>, // GICC
- <0x0 0x2c010000 0 0x2000>, // GICH
- <0x0 0x2c020000 0 0x2000>; // GICV
- interrupts = <1 9 4>;
-
- msi-controller;
- mbi-ranges = <256 128>;
-
- gic-its@2c200000 {
- compatible = "arm,gic-v3-its";
- msi-controller;
- #msi-cells = <1>;
- reg = <0x0 0x2c200000 0 0x20000>;
- };
- };
-
- gic: interrupt-controller@2c010000 {
- compatible = "arm,gic-v3";
- #interrupt-cells = <4>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- interrupt-controller;
- redistributor-stride = <0x0 0x40000>; // 256kB stride
- #redistributor-regions = <2>;
- reg = <0x0 0x2c010000 0 0x10000>, // GICD
- <0x0 0x2d000000 0 0x800000>, // GICR 1: CPUs 0-31
- <0x0 0x2e000000 0 0x800000>; // GICR 2: CPUs 32-63
- <0x0 0x2c040000 0 0x2000>, // GICC
- <0x0 0x2c060000 0 0x2000>, // GICH
- <0x0 0x2c080000 0 0x2000>; // GICV
- interrupts = <1 9 4>;
-
- gic-its@2c200000 {
- compatible = "arm,gic-v3-its";
- msi-controller;
- #msi-cells = <1>;
- reg = <0x0 0x2c200000 0 0x20000>;
- };
-
- gic-its@2c400000 {
- compatible = "arm,gic-v3-its";
- msi-controller;
- #msi-cells = <1>;
- reg = <0x0 0x2c400000 0 0x20000>;
- };
-
- ppi-partitions {
- part0: interrupt-partition-0 {
- affinity = <&cpu0 &cpu2>;
- };
-
- part1: interrupt-partition-1 {
- affinity = <&cpu1 &cpu3>;
- };
- };
- };
-
-
- device@0 {
- reg = <0 0 0 4>;
- interrupts = <1 1 4 &part0>;
- };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
new file mode 100644
index 000000000000..c34df35a25fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
@@ -0,0 +1,279 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Generic Interrupt Controller, version 3
+
+maintainers:
+ - Marc Zyngier <marc.zyngier@arm.com>
+
+description: |
+ AArch64 SMP cores are often associated with a GICv3, providing Private
+ Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
+ Software Generated Interrupts (SGI), and Locality-specific Peripheral
+ Interrupts (LPI).
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - qcom,msm8996-gic-v3
+ - const: arm,gic-v3
+ - const: arm,gic-v3
+
+ interrupt-controller: true
+
+ "#address-cells":
+ enum: [ 0, 1, 2 ]
+ "#size-cells":
+ enum: [ 1, 2 ]
+
+ ranges: true
+
+ "#interrupt-cells":
+ description: |
+ Specifies the number of cells needed to encode an interrupt source.
+ Must be a single cell with a value of at least 3.
+ If the system requires describing PPI affinity, then the value must
+ be at least 4.
+
+ The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+ interrupts. Other values are reserved for future use.
+
+ The 2nd cell contains the interrupt number for the interrupt type.
+ SPI interrupts are in the range [0-987]. PPI interrupts are in the
+ range [0-15].
+
+ The 3rd cell is the flags, encoded as follows:
+ bits[3:0] trigger type and level flags.
+ 1 = edge triggered
+ 4 = level triggered
+
+ The 4th cell is a phandle to a node describing a set of CPUs this
+ interrupt is affine to. The interrupt must be a PPI, and the node
+ pointed must be a subnode of the "ppi-partitions" subnode. For
+ interrupt types other than PPI or PPIs that are not partitionned,
+ this cell must be zero. See the "ppi-partitions" node description
+ below.
+
+ Cells 5 and beyond are reserved for future use and must have a value
+ of 0 if present.
+ enum: [ 3, 4 ]
+
+ reg:
+ description: |
+ Specifies base physical address(s) and size of the GIC
+ registers, in the following order:
+ - GIC Distributor interface (GICD)
+ - GIC Redistributors (GICR), one range per redistributor region
+ - GIC CPU interface (GICC)
+ - GIC Hypervisor interface (GICH)
+ - GIC Virtual CPU interface (GICV)
+
+ GICC, GICH and GICV are optional.
+ minItems: 2
+ maxItems: 4096 # Should be enough?
+
+ interrupts:
+ description:
+ Interrupt source of the VGIC maintenance interrupt.
+ maxItems: 1
+
+ redistributor-stride:
+ description:
+ If using padding pages, specifies the stride of consecutive
+ redistributors. Must be a multiple of 64kB.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint64
+ - multipleOf: 0x10000
+ exclusiveMinimum: 0
+
+ "#redistributor-regions":
+ description:
+ The number of independent contiguous regions occupied by the
+ redistributors. Required if more than one such region is present.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - maximum: 4096 # Should be enough?
+
+ msi-controller:
+ description:
+ Only present if the Message Based Interrupt functionnality is
+ being exposed by the HW, and the mbi-ranges property present.
+
+ mbi-ranges:
+ description:
+ A list of pairs <intid span>, where "intid" is the first SPI of a range
+ that can be used an MBI, and "span" the size of that range. Multiple
+ ranges can be provided.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ - items:
+ minItems: 2
+ maxItems: 2
+
+ mbi-alias:
+ description:
+ Address property. Base address of an alias of the GICD region containing
+ only the {SET,CLR}SPI registers to be used if isolation is required,
+ and if supported by the HW.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - items:
+ minItems: 1
+ maxItems: 2
+
+ ppi-partitions:
+ type: object
+ description:
+ PPI affinity can be expressed as a single "ppi-partitions" node,
+ containing a set of sub-nodes.
+ patternProperties:
+ "^interrupt-partition-[0-9]+$":
+ properties:
+ affinity:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Should be a list of phandles to CPU nodes (as described in
+ Documentation/devicetree/bindings/arm/cpus.yaml).
+
+ required:
+ - affinity
+
+dependencies:
+ mbi-ranges: [ msi-controller ]
+ msi-controller: [ mbi-ranges ]
+
+required:
+ - compatible
+ - interrupts
+ - reg
+
+patternProperties:
+ "^gic-its@": false
+ "^interrupt-controller@[0-9a-f]+$": false
+ # msi-controller is preferred, but allow other names
+ "^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$":
+ type: object
+ description:
+ GICv3 has one or more Interrupt Translation Services (ITS) that are
+ used to route Message Signalled Interrupts (MSI) to the CPUs.
+ properties:
+ compatible:
+ const: arm,gic-v3-its
+
+ msi-controller: true
+
+ "#msi-cells":
+ description:
+ The single msi-cell is the DeviceID of the device which will generate
+ the MSI.
+ const: 1
+
+ reg:
+ description:
+ Specifies the base physical address and size of the ITS registers.
+ maxItems: 1
+
+ socionext,synquacer-pre-its:
+ description:
+ (u32, u32) tuple describing the untranslated
+ address and size of the pre-ITS window.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - items:
+ minItems: 2
+ maxItems: 2
+
+ required:
+ - compatible
+ - msi-controller
+ - "#msi-cells"
+ - reg
+
+ additionalProperties: false
+
+additionalProperties: false
+
+examples:
+ - |
+ gic: interrupt-controller@2cf00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ reg = <0x2f000000 0x10000>, // GICD
+ <0x2f100000 0x200000>, // GICR
+ <0x2c000000 0x2000>, // GICC
+ <0x2c010000 0x2000>, // GICH
+ <0x2c020000 0x2000>; // GICV
+ interrupts = <1 9 4>;
+
+ msi-controller;
+ mbi-ranges = <256 128>;
+
+ msi-controller@2c200000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x2c200000 0x20000>;
+ };
+ };
+
+ interrupt-controller@2c010000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ redistributor-stride = <0x0 0x40000>; // 256kB stride
+ #redistributor-regions = <2>;
+ reg = <0x2c010000 0x10000>, // GICD
+ <0x2d000000 0x800000>, // GICR 1: CPUs 0-31
+ <0x2e000000 0x800000>, // GICR 2: CPUs 32-63
+ <0x2c040000 0x2000>, // GICC
+ <0x2c060000 0x2000>, // GICH
+ <0x2c080000 0x2000>; // GICV
+ interrupts = <1 9 4>;
+
+ msi-controller@2c200000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x2c200000 0x20000>;
+ };
+
+ msi-controller@2c400000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x2c400000 0x20000>;
+ };
+
+ ppi-partitions {
+ part0: interrupt-partition-0 {
+ affinity = <&cpu0 &cpu2>;
+ };
+
+ part1: interrupt-partition-1 {
+ affinity = <&cpu1 &cpu3>;
+ };
+ };
+ };
+
+
+ device@0 {
+ reg = <0 4>;
+ interrupts = <1 1 4 &part0>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
deleted file mode 100644
index 2f3244648646..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
+++ /dev/null
@@ -1,171 +0,0 @@
-* ARM Generic Interrupt Controller
-
-ARM SMP cores are often associated with a GIC, providing per processor
-interrupts (PPI), shared processor interrupts (SPI) and software
-generated interrupts (SGI).
-
-Primary GIC is attached directly to the CPU and typically has PPIs and SGIs.
-Secondary GICs are cascaded into the upward interrupt controller and do not
-have PPIs or SGIs.
-
-Main node required properties:
-
-- compatible : should be one of:
- "arm,arm1176jzf-devchip-gic"
- "arm,arm11mp-gic"
- "arm,cortex-a15-gic"
- "arm,cortex-a7-gic"
- "arm,cortex-a9-gic"
- "arm,eb11mp-gic"
- "arm,gic-400"
- "arm,pl390"
- "arm,tc11mp-gic"
- "brcm,brahma-b15-gic"
- "nvidia,tegra210-agic"
- "qcom,msm-8660-qgic"
- "qcom,msm-qgic2"
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
- interrupt source. The type shall be a <u32> and the value shall be 3.
-
- The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
- interrupts.
-
- The 2nd cell contains the interrupt number for the interrupt type.
- SPI interrupts are in the range [0-987]. PPI interrupts are in the
- range [0-15].
-
- The 3rd cell is the flags, encoded as follows:
- bits[3:0] trigger type and level flags.
- 1 = low-to-high edge triggered
- 2 = high-to-low edge triggered (invalid for SPIs)
- 4 = active high level-sensitive
- 8 = active low level-sensitive (invalid for SPIs).
- bits[15:8] PPI interrupt cpu mask. Each bit corresponds to each of
- the 8 possible cpus attached to the GIC. A bit set to '1' indicated
- the interrupt is wired to that CPU. Only valid for PPI interrupts.
- Also note that the configurability of PPI interrupts is IMPLEMENTATION
- DEFINED and as such not guaranteed to be present (most SoC available
- in 2014 seem to ignore the setting of this flag and use the hardware
- default value).
-
-- reg : Specifies base physical address(s) and size of the GIC registers. The
- first region is the GIC distributor register base and size. The 2nd region is
- the GIC cpu interface register base and size.
-
-Optional
-- interrupts : Interrupt source of the parent interrupt controller on
- secondary GICs, or VGIC maintenance interrupt on primary GIC (see
- below).
-
-- cpu-offset : per-cpu offset within the distributor and cpu interface
- regions, used when the GIC doesn't have banked registers. The offset is
- cpu-offset * cpu-nr.
-
-- clocks : List of phandle and clock-specific pairs, one for each entry
- in clock-names.
-- clock-names : List of names for the GIC clock input(s). Valid clock names
- depend on the GIC variant:
- "ic_clk" (for "arm,arm11mp-gic")
- "PERIPHCLKEN" (for "arm,cortex-a15-gic")
- "PERIPHCLK", "PERIPHCLKEN" (for "arm,cortex-a9-gic")
- "clk" (for "arm,gic-400" and "nvidia,tegra210")
- "gclk" (for "arm,pl390")
-
-- power-domains : A phandle and PM domain specifier as defined by bindings of
- the power controller specified by phandle, used when the GIC
- is part of a Power or Clock Domain.
-
-
-Example:
-
- intc: interrupt-controller@fff11000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <1>;
- interrupt-controller;
- reg = <0xfff11000 0x1000>,
- <0xfff10100 0x100>;
- };
-
-
-* GIC virtualization extensions (VGIC)
-
-For ARM cores that support the virtualization extensions, additional
-properties must be described (they only exist if the GIC is the
-primary interrupt controller).
-
-Required properties:
-
-- reg : Additional regions specifying the base physical address and
- size of the VGIC registers. The first additional region is the GIC
- virtual interface control register base and size. The 2nd additional
- region is the GIC virtual cpu interface register base and size.
-
-- interrupts : VGIC maintenance interrupt.
-
-Example:
-
- interrupt-controller@2c001000 {
- compatible = "arm,cortex-a15-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x2c001000 0x1000>,
- <0x2c002000 0x2000>,
- <0x2c004000 0x2000>,
- <0x2c006000 0x2000>;
- interrupts = <1 9 0xf04>;
- };
-
-
-* GICv2m extension for MSI/MSI-x support (Optional)
-
-Certain revisions of GIC-400 supports MSI/MSI-x via V2M register frame(s).
-This is enabled by specifying v2m sub-node(s).
-
-Required properties:
-
-- compatible : The value here should contain "arm,gic-v2m-frame".
-
-- msi-controller : Identifies the node as an MSI controller.
-
-- reg : GICv2m MSI interface register base and size
-
-Optional properties:
-
-- arm,msi-base-spi : When the MSI_TYPER register contains an incorrect
- value, this property should contain the SPI base of
- the MSI frame, overriding the HW value.
-
-- arm,msi-num-spis : When the MSI_TYPER register contains an incorrect
- value, this property should contain the number of
- SPIs assigned to the frame, overriding the HW value.
-
-Example:
-
- interrupt-controller@e1101000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-controller;
- interrupts = <1 8 0xf04>;
- ranges = <0 0 0 0xe1100000 0 0x100000>;
- reg = <0x0 0xe1110000 0 0x01000>,
- <0x0 0xe112f000 0 0x02000>,
- <0x0 0xe1140000 0 0x10000>,
- <0x0 0xe1160000 0 0x10000>;
- v2m0: v2m@8000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x0 0x80000 0 0x1000>;
- };
-
- ....
-
- v2mN: v2m@9000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x0 0x90000 0 0x1000>;
- };
- };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
new file mode 100644
index 000000000000..758fbd7128e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,gic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Generic Interrupt Controller v1 and v2
+
+maintainers:
+ - Marc Zyngier <marc.zyngier@arm.com>
+
+description: |+
+ ARM SMP cores are often associated with a GIC, providing per processor
+ interrupts (PPI), shared processor interrupts (SPI) and software
+ generated interrupts (SGI).
+
+ Primary GIC is attached directly to the CPU and typically has PPIs and SGIs.
+ Secondary GICs are cascaded into the upward interrupt controller and do not
+ have PPIs or SGIs.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - arm,arm11mp-gic
+ - arm,cortex-a15-gic
+ - arm,cortex-a7-gic
+ - arm,cortex-a5-gic
+ - arm,cortex-a9-gic
+ - arm,eb11mp-gic
+ - arm,gic-400
+ - arm,pl390
+ - arm,tc11mp-gic
+ - nvidia,tegra210-agic
+ - qcom,msm-8660-qgic
+ - qcom,msm-qgic2
+
+ - items:
+ - const: arm,arm1176jzf-devchip-gic
+ - const: arm,arm11mp-gic
+
+ - items:
+ - const: brcm,brahma-b15-gic
+ - const: arm,cortex-a15-gic
+
+ interrupt-controller: true
+
+ "#address-cells":
+ enum: [ 0, 1 ]
+ "#size-cells":
+ const: 1
+
+ "#interrupt-cells":
+ const: 3
+ description: |
+ The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+ interrupts.
+
+ The 2nd cell contains the interrupt number for the interrupt type.
+ SPI interrupts are in the range [0-987]. PPI interrupts are in the
+ range [0-15].
+
+ The 3rd cell is the flags, encoded as follows:
+ bits[3:0] trigger type and level flags.
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered (invalid for SPIs)
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive (invalid for SPIs).
+ bits[15:8] PPI interrupt cpu mask. Each bit corresponds to each of
+ the 8 possible cpus attached to the GIC. A bit set to '1' indicated
+ the interrupt is wired to that CPU. Only valid for PPI interrupts.
+ Also note that the configurability of PPI interrupts is IMPLEMENTATION
+ DEFINED and as such not guaranteed to be present (most SoC available
+ in 2014 seem to ignore the setting of this flag and use the hardware
+ default value).
+
+ reg:
+ description: |
+ Specifies base physical address(s) and size of the GIC registers. The
+ first region is the GIC distributor register base and size. The 2nd region
+ is the GIC cpu interface register base and size.
+
+ For GICv2 with virtualization extensions, additional regions are
+ required for specifying the base physical address and size of the VGIC
+ registers. The first additional region is the GIC virtual interface
+ control register base and size. The 2nd additional region is the GIC
+ virtual cpu interface register base and size.
+ minItems: 2
+ maxItems: 4
+
+ interrupts:
+ description: Interrupt source of the parent interrupt controller on
+ secondary GICs, or VGIC maintenance interrupt on primary GIC (see
+ below).
+ maxItems: 1
+
+ cpu-offset:
+ description: per-cpu offset within the distributor and cpu interface
+ regions, used when the GIC doesn't have banked registers. The offset
+ is cpu-offset * cpu-nr.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ description: List of names for the GIC clock input(s). Valid clock names
+ depend on the GIC variant.
+ oneOf:
+ - const: ic_clk # for "arm,arm11mp-gic"
+ - const: PERIPHCLKEN # for "arm,cortex-a15-gic"
+ - items: # for "arm,cortex-a9-gic"
+ - const: PERIPHCLK
+ - const: PERIPHCLKEN
+ - const: clk # for "arm,gic-400" and "nvidia,tegra210"
+ - const: gclk #for "arm,pl390"
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+patternProperties:
+ "^v2m@[0-9a-f]+$":
+ description: |
+ * GICv2m extension for MSI/MSI-x support (Optional)
+
+ Certain revisions of GIC-400 supports MSI/MSI-x via V2M register frame(s).
+ This is enabled by specifying v2m sub-node(s).
+
+ properties:
+ compatible:
+ const: arm,gic-v2m-frame
+
+ msi-controller: true
+
+ reg:
+ maxItems: 1
+ description: GICv2m MSI interface register base and size
+
+ arm,msi-base-spi:
+ description: When the MSI_TYPER register contains an incorrect value,
+ this property should contain the SPI base of the MSI frame, overriding
+ the HW value.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ arm,msi-num-spis:
+ description: When the MSI_TYPER register contains an incorrect value,
+ this property should contain the number of SPIs assigned to the
+ frame, overriding the HW value.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ required:
+ - compatible
+ - msi-controller
+ - reg
+
+ additionalProperties: false
+
+additionalProperties: false
+
+examples:
+ - |
+ // GICv1
+ intc: interrupt-controller@fff11000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0xfff11000 0x1000>,
+ <0xfff10100 0x100>;
+ };
+
+ - |
+ // GICv2
+ interrupt-controller@2c001000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x2c001000 0x1000>,
+ <0x2c002000 0x2000>,
+ <0x2c004000 0x2000>,
+ <0x2c006000 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ - |
+ // GICv2m extension for MSI/MSI-x support
+ interrupt-controller@e1101000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-controller;
+ interrupts = <1 8 0xf04>;
+ ranges = <0 0 0 0xe1100000 0 0x100000>;
+ reg = <0x0 0xe1110000 0 0x01000>,
+ <0x0 0xe112f000 0 0x02000>,
+ <0x0 0xe1140000 0 0x10000>,
+ <0x0 0xe1160000 0 0x10000>;
+
+ v2m0: v2m@8000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x0 0x80000 0 0x1000>;
+ };
+
+ //...
+
+ v2mN: v2m@9000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x0 0x90000 0 0x1000>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 385d22460b1d..8162b0eb4b50 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -140,6 +140,7 @@ fairphone Fairphone B.V.
faraday Faraday Technology Corporation
fastrax Fastrax Oy
fcs Fairchild Semiconductor
+feiyang Shenzhen Fly Young Technology Co.,LTD.
firefly Firefly
focaltech FocalTech Systems Co.,Ltd
friendlyarm Guangzhou FriendlyARM Computer Tech Co., Ltd
@@ -400,6 +401,7 @@ tcl Toby Churchill Ltd.
technexion TechNexion
technologic Technologic Systems
tempo Tempo Semiconductor
+techstar Shenzhen Techstar Electronics Co., Ltd.
terasic Terasic Inc.
thine THine Electronics, Inc.
ti Texas Instruments
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index 0a9f59d89185..9a53d3908b52 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -1093,6 +1093,13 @@ static struct device *s5p_mfc_alloc_memdev(struct device *dev,
child->dma_mask = dev->dma_mask;
child->release = s5p_mfc_memdev_release;
+ /*
+ * The memdevs are not proper OF platform devices, so in order for them
+ * to be treated as valid DMA masters we need a bit of a hack to force
+ * them to inherit the MFC node's DMA configuration.
+ */
+ of_dma_configure(child, dev->of_node, true);
+
if (device_add(child) == 0) {
ret = of_reserved_mem_device_init_by_idx(child, dev->of_node,
idx);
diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c
index 1977ee0adcb1..e773063c6de9 100644
--- a/drivers/of/of_reserved_mem.c
+++ b/drivers/of/of_reserved_mem.c
@@ -26,7 +26,7 @@
static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS];
static int reserved_mem_count;
-int __init __weak early_init_dt_alloc_reserved_memory_arch(phys_addr_t size,
+static int __init early_init_dt_alloc_reserved_memory_arch(phys_addr_t size,
phys_addr_t align, phys_addr_t start, phys_addr_t end, bool nomap,
phys_addr_t *res_base)
{
@@ -340,10 +340,6 @@ int of_reserved_mem_device_init_by_idx(struct device *dev,
mutex_lock(&of_rmem_assigned_device_mutex);
list_add(&rd->list, &of_rmem_assigned_device_list);
mutex_unlock(&of_rmem_assigned_device_mutex);
- /* ensure that dma_ops is set for virtual devices
- * using reserved memory
- */
- of_dma_configure(dev, np, true);
dev_info(dev, "assigned reserved memory node %s\n", rmem->name);
} else {
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 84427384654d..66037511f2d7 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -1116,15 +1116,22 @@ static void update_node_properties(struct device_node *np,
for (prop = np->properties; prop != NULL; prop = save_next) {
save_next = prop->next;
ret = of_add_property(dup, prop);
- if (ret)
+ if (ret) {
+ if (ret == -EEXIST && !strcmp(prop->name, "name"))
+ continue;
pr_err("unittest internal error: unable to add testdata property %pOF/%s",
np, prop->name);
+ }
}
}
/**
* attach_node_and_children - attaches nodes
- * and its children to live tree
+ * and its children to live tree.
+ * CAUTION: misleading function name - if node @np already exists in
+ * the live tree then children of @np are *not* attached to the live
+ * tree. This works for the current test devicetree nodes because such
+ * nodes do not have child nodes.
*
* @np: Node to attach to live tree
*/
@@ -2514,6 +2521,10 @@ static int __init of_unittest(void)
int res;
/* adding data for unittest */
+
+ if (IS_ENABLED(CONFIG_UML))
+ unittest_unflatten_overlay_base();
+
res = unittest_data_add();
if (res)
return res;
diff --git a/include/linux/of_reserved_mem.h b/include/linux/of_reserved_mem.h
index 67ab8d271df3..60f541912ccf 100644
--- a/include/linux/of_reserved_mem.h
+++ b/include/linux/of_reserved_mem.h
@@ -35,13 +35,6 @@ int of_reserved_mem_device_init_by_idx(struct device *dev,
struct device_node *np, int idx);
void of_reserved_mem_device_release(struct device *dev);
-int early_init_dt_alloc_reserved_memory_arch(phys_addr_t size,
- phys_addr_t align,
- phys_addr_t start,
- phys_addr_t end,
- bool nomap,
- phys_addr_t *res_base);
-
void fdt_init_reserved_mem(void);
void fdt_reserved_mem_save_node(unsigned long node, const char *uname,
phys_addr_t base, phys_addr_t size);
diff --git a/scripts/dtc/dtx_diff b/scripts/dtc/dtx_diff
index 8c4fbad2055e..0d8572008729 100755
--- a/scripts/dtc/dtx_diff
+++ b/scripts/dtc/dtx_diff
@@ -21,6 +21,7 @@ Usage:
diff DTx_1 and DTx_2
+ --annotate synonym for -T
-f print full dts in diff (--unified=99999)
-h synonym for --help
-help synonym for --help
@@ -28,6 +29,7 @@ Usage:
-s SRCTREE linux kernel source tree is at path SRCTREE
(default is current directory)
-S linux kernel source tree is at root of current git repo
+ -T Annotate output .dts with input source file and line (-T -T for more details)
-u unsorted, do not sort DTx
@@ -174,6 +176,7 @@ compile_to_dts() {
# ----- start of script
+annotate=""
cmd_diff=0
diff_flags="-u"
dtx_file_1=""
@@ -208,6 +211,14 @@ while [ $# -gt 0 ] ; do
shift
;;
+ -T | --annotate )
+ if [ "${annotate}" = "" ] ; then
+ annotate="-T"
+ elif [ "${annotate}" = "-T" ] ; then
+ annotate="-T -T"
+ fi
+ shift
+ ;;
-u )
dtc_sort=""
shift
@@ -327,7 +338,7 @@ cpp_flags="\
DTC="\
${DTC} \
-i ${srctree}/scripts/dtc/include-prefixes \
- -O dts -qq -f ${dtc_sort} -o -"
+ -O dts -qq -f ${dtc_sort} ${annotate} -o -"
# ----- do the diff or decompile