diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/blackfin/include/asm/trace.h | 2 | ||||
| -rw-r--r-- | arch/blackfin/kernel/Makefile | 3 | ||||
| -rw-r--r-- | arch/blackfin/kernel/dumpstack.c | 181 | ||||
| -rw-r--r-- | arch/blackfin/kernel/exception.c | 45 | ||||
| -rw-r--r-- | arch/blackfin/kernel/sys_bfin.c | 23 | ||||
| -rw-r--r-- | arch/blackfin/kernel/trace.c | 594 | ||||
| -rw-r--r-- | arch/blackfin/kernel/traps.c | 875 |
7 files changed, 887 insertions, 836 deletions
diff --git a/arch/blackfin/include/asm/trace.h b/arch/blackfin/include/asm/trace.h index dc0aa55ae773..395decd8bc3b 100644 --- a/arch/blackfin/include/asm/trace.h +++ b/arch/blackfin/include/asm/trace.h @@ -23,6 +23,8 @@ #ifndef __ASSEMBLY__ extern unsigned long trace_buff_offset; extern unsigned long software_trace_buff[]; +extern void decode_address(char *buf, unsigned long address); +extern bool get_instruction(unsigned short *val, unsigned short *address); /* Trace Macros for C files */ diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 346a421f1562..b32a04a95d99 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -7,7 +7,8 @@ extra-y := init_task.o vmlinux.lds obj-y := \ entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \ sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \ - fixed_code.o reboot.o bfin_gpio.o bfin_dma_5xx.o + fixed_code.o reboot.o bfin_gpio.o bfin_dma_5xx.o \ + trace.o exception.o dumpstack.o ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y) obj-y += time-ts.o diff --git a/arch/blackfin/kernel/dumpstack.c b/arch/blackfin/kernel/dumpstack.c new file mode 100644 index 000000000000..e81392c9d1db --- /dev/null +++ b/arch/blackfin/kernel/dumpstack.c @@ -0,0 +1,181 @@ +/* Provide basic stack dumping functions + * + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#include <linux/kernel.h> +#include <linux/thread_info.h> +#include <linux/mm.h> +#include <linux/uaccess.h> +#include <linux/module.h> +#include <asm/trace.h> + +/* + * Checks to see if the address pointed to is either a + * 16-bit CALL instruction, or a 32-bit CALL instruction + */ +static bool is_bfin_call(unsigned short *addr) +{ + unsigned short opcode = 0, *ins_addr; + ins_addr = (unsigned short *)addr; + + if (!get_instruction(&opcode, ins_addr)) + return false; + + if ((opcode >= 0x0060 && opcode <= 0x0067) || + (opcode >= 0x0070 && opcode <= 0x0077)) + return true; + + ins_addr--; + if (!get_instruction(&opcode, ins_addr)) + return false; + + if (opcode >= 0xE300 && opcode <= 0xE3FF) + return true; + + return false; + +} + +void show_stack(struct task_struct *task, unsigned long *stack) +{ +#ifdef CONFIG_PRINTK + unsigned int *addr, *endstack, *fp = 0, *frame; + unsigned short *ins_addr; + char buf[150]; + unsigned int i, j, ret_addr, frame_no = 0; + + /* + * If we have been passed a specific stack, use that one otherwise + * if we have been passed a task structure, use that, otherwise + * use the stack of where the variable "stack" exists + */ + + if (stack == NULL) { + if (task) { + /* We know this is a kernel stack, so this is the start/end */ + stack = (unsigned long *)task->thread.ksp; + endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE); + } else { + /* print out the existing stack info */ + stack = (unsigned long *)&stack; + endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack); + } + } else + endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack); + + printk(KERN_NOTICE "Stack info:\n"); + decode_address(buf, (unsigned int)stack); + printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf); + + if (!access_ok(VERIFY_READ, stack, (unsigned int)endstack - (unsigned int)stack)) { + printk(KERN_NOTICE "Invalid stack pointer\n"); + return; + } + + /* First thing is to look for a frame pointer */ + for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) { + if (*addr & 0x1) + continue; + ins_addr = (unsigned short *)*addr; + ins_addr--; + if (is_bfin_call(ins_addr)) + fp = addr - 1; + + if (fp) { + /* Let's check to see if it is a frame pointer */ + while (fp >= (addr - 1) && fp < endstack + && fp && ((unsigned int) fp & 0x3) == 0) + fp = (unsigned int *)*fp; + if (fp == 0 || fp == endstack) { + fp = addr - 1; + break; + } + fp = 0; + } + } + if (fp) { + frame = fp; + printk(KERN_NOTICE " FP: (0x%p)\n", fp); + } else + frame = 0; + + /* + * Now that we think we know where things are, we + * walk the stack again, this time printing things out + * incase there is no frame pointer, we still look for + * valid return addresses + */ + + /* First time print out data, next time, print out symbols */ + for (j = 0; j <= 1; j++) { + if (j) + printk(KERN_NOTICE "Return addresses in stack:\n"); + else + printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack); + + fp = frame; + frame_no = 0; + + for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0; + addr < endstack; addr++, i++) { + + ret_addr = 0; + if (!j && i % 8 == 0) + printk(KERN_NOTICE "%p:", addr); + + /* if it is an odd address, or zero, just skip it */ + if (*addr & 0x1 || !*addr) + goto print; + + ins_addr = (unsigned short *)*addr; + + /* Go back one instruction, and see if it is a CALL */ + ins_addr--; + ret_addr = is_bfin_call(ins_addr); + print: + if (!j && stack == (unsigned long *)addr) + printk("[%08x]", *addr); + else if (ret_addr) + if (j) { + decode_address(buf, (unsigned int)*addr); + if (frame == addr) { + printk(KERN_NOTICE " frame %2i : %s\n", frame_no, buf); + continue; + } + printk(KERN_NOTICE " address : %s\n", buf); + } else + printk("<%08x>", *addr); + else if (fp == addr) { + if (j) + frame = addr+1; + else + printk("(%08x)", *addr); + + fp = (unsigned int *)*addr; + frame_no++; + + } else if (!j) + printk(" %08x ", *addr); + } + if (!j) + printk("\n"); + } +#endif +} +EXPORT_SYMBOL(show_stack); + +void dump_stack(void) +{ + unsigned long stack; +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON + int tflags; +#endif + trace_buffer_save(tflags); + dump_bfin_trace_buffer(); + show_stack(current, &stack); + trace_buffer_restore(tflags); +} +EXPORT_SYMBOL(dump_stack); diff --git a/arch/blackfin/kernel/exception.c b/arch/blackfin/kernel/exception.c new file mode 100644 index 000000000000..9208b5fd5186 --- /dev/null +++ b/arch/blackfin/kernel/exception.c @@ -0,0 +1,45 @@ +/* Basic functions for adding/removing custom exception handlers + * + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#include <linux/module.h> +#include <asm/irq_handler.h> + +int bfin_request_exception(unsigned int exception, void (*handler)(void)) +{ + void (*curr_handler)(void); + + if (exception > 0x3F) + return -EINVAL; + + curr_handler = ex_table[exception]; + + if (curr_handler != ex_replaceable) + return -EBUSY; + + ex_table[exception] = handler; + + return 0; +} +EXPORT_SYMBOL(bfin_request_exception); + +int bfin_free_exception(unsigned int exception, void (*handler)(void)) +{ + void (*curr_handler)(void); + + if (exception > 0x3F) + return -EINVAL; + + curr_handler = ex_table[exception]; + + if (curr_handler != handler) + return -EBUSY; + + ex_table[exception] = ex_replaceable; + + return 0; +} +EXPORT_SYMBOL(bfin_free_exception); diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c index 2e7f8e10bf87..bdc1e2f0da32 100644 --- a/arch/blackfin/kernel/sys_bfin.c +++ b/arch/blackfin/kernel/sys_bfin.c @@ -47,3 +47,26 @@ unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr, } EXPORT_SYMBOL(get_fb_unmapped_area); #endif + +/* Needed for legacy userspace atomic emulation */ +static DEFINE_SPINLOCK(bfin_spinlock_lock); + +#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1 +__attribute__((l1_text)) +#endif +asmlinkage int sys_bfin_spinlock(int *p) +{ + int ret, tmp = 0; + + spin_lock(&bfin_spinlock_lock); /* This would also hold kernel preemption. */ + ret = get_user(tmp, p); + if (likely(ret == 0)) { + if (unlikely(tmp)) + ret = 1; + else + put_user(1, p); + } + spin_unlock(&bfin_spinlock_lock); + + return ret; +} diff --git a/arch/blackfin/kernel/trace.c b/arch/blackfin/kernel/trace.c new file mode 100644 index 000000000000..3a268c3ed47e --- /dev/null +++ b/arch/blackfin/kernel/trace.c @@ -0,0 +1,594 @@ +/* provide some functions which dump the trace buffer, in a nice way for people + * to read it, and understand what is going on + * + * Copyright 2004-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#include <linux/kernel.h> +#include <linux/hardirq.h> +#include <linux/thread_info.h> +#include <linux/mm.h> +#include <linux/uaccess.h> +#include <linux/module.h> +#include <linux/kallsyms.h> +#include <linux/err.h> +#include <linux/fs.h> +#include <asm/dma.h> +#include <asm/trace.h> +#include <asm/fixed_code.h> +#include <asm/traps.h> + +#ifdef CONFIG_DEBUG_VERBOSE +#define verbose_printk(fmt, arg...) \ + printk(fmt, ##arg) +#else +#define verbose_printk(fmt, arg...) \ + ({ if (0) printk(fmt, ##arg); 0; }) +#endif + + +void decode_address(char *buf, unsigned long address) +{ +#ifdef CONFIG_DEBUG_VERBOSE + struct task_struct *p; + struct mm_struct *mm; + unsigned long flags, offset; + unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic(); + struct rb_node *n; + +#ifdef CONFIG_KALLSYMS + unsigned long symsize; + const char *symname; + char *modname; + char *delim = ":"; + char namebuf[128]; +#endif + + buf += sprintf(buf, "<0x%08lx> ", address); + +#ifdef CONFIG_KALLSYMS + /* look up the address and see if we are in kernel space */ + symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf); + + if (symname) { + /* yeah! kernel space! */ + if (!modname) + modname = delim = ""; + sprintf(buf, "{ %s%s%s%s + 0x%lx }", + delim, modname, delim, symname, + (unsigned long)offset); + return; + } +#endif + + if (address >= FIXED_CODE_START && address < FIXED_CODE_END) { + /* Problem in fixed code section? */ + strcat(buf, "/* Maybe fixed code section */"); + return; + + } else if (address < CONFIG_BOOT_LOAD) { + /* Problem somewhere before the kernel start address */ + strcat(buf, "/* Maybe null pointer? */"); + return; + + } else if (address >= COREMMR_BASE) { + strcat(buf, "/* core mmrs */"); + return; + + } else if (address >= SYSMMR_BASE) { + strcat(buf, "/* system mmrs */"); + return; + + } else if (address >= L1_ROM_START && address < L1_ROM_START + L1_ROM_LENGTH) { + strcat(buf, "/* on-chip L1 ROM */"); + return; + } + + /* + * Don't walk any of the vmas if we are oopsing, it has been known + * to cause problems - corrupt vmas (kernel crashes) cause double faults + */ + if (oops_in_progress) { + strcat(buf, "/* kernel dynamic memory (maybe user-space) */"); + return; + } + + /* looks like we're off in user-land, so let's walk all the + * mappings of all our processes and see if we can't be a whee + * bit more specific + */ + write_lock_irqsave(&tasklist_lock, flags); + for_each_process(p) { + mm = (in_atomic ? p->mm : get_task_mm(p)); + if (!mm) + continue; + + if (!down_read_trylock(&mm->mmap_sem)) { + if (!in_atomic) + mmput(mm); + continue; + } + + for (n = rb_first(&mm->mm_rb); n; n = rb_next(n)) { + struct vm_area_struct *vma; + + vma = rb_entry(n, struct vm_area_struct, vm_rb); + + if (address >= vma->vm_start && address < vma->vm_end) { + char _tmpbuf[256]; + char *name = p->comm; + struct file *file = vma->vm_file; + + if (file) { + char *d_name = d_path(&file->f_path, _tmpbuf, + sizeof(_tmpbuf)); + if (!IS_ERR(d_name)) + name = d_name; + } + + /* FLAT does not have its text aligned to the start of + * the map while FDPIC ELF does ... + */ + + /* before we can check flat/fdpic, we need to + * make sure current is valid + */ + if ((unsigned long)current >= FIXED_CODE_START && + !((unsigned long)current & 0x3)) { + if (current->mm && + (address > current->mm->start_code) && + (address < current->mm->end_code)) + offset = address - current->mm->start_code; + else + offset = (address - vma->vm_start) + + (vma->vm_pgoff << PAGE_SHIFT); + + sprintf(buf, "[ %s + 0x%lx ]", name, offset); + } else + sprintf(buf, "[ %s vma:0x%lx-0x%lx]", + name, vma->vm_start, vma->vm_end); + + up_read(&mm->mmap_sem); + if (!in_atomic) + mmput(mm); + + if (buf[0] == '\0') + sprintf(buf, "[ %s ] dynamic memory", name); + + goto done; + } + } + + up_read(&mm->mmap_sem); + if (!in_atomic) + mmput(mm); + } + + /* + * we were unable to find this address anywhere, + * or some MMs were skipped because they were in use. + */ + sprintf(buf, "/* kernel dynamic memory */"); + +done: + write_unlock_irqrestore(&tasklist_lock, flags); +#else + sprintf(buf, " "); +#endif +} + +#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1) + +/* + * Similar to get_user, do some address checking, then dereference + * Return true on success, false on bad address + */ +bool get_instruction(unsigned short *val, unsigned short *address) +{ + unsigned long addr = (unsigned long)address; + + /* Check for odd addresses */ + if (addr & 0x1) + return false; + + /* MMR region will never have instructions */ + if (addr >= SYSMMR_BASE) + return false; + + switch (bfin_mem_access_type(addr, 2)) { + case BFIN_MEM_ACCESS_CORE: + case BFIN_MEM_ACCESS_CORE_ONLY: + *val = *address; + return true; + case BFIN_MEM_ACCESS_DMA: + dma_memcpy(val, address, 2); + return true; + case BFIN_MEM_ACCESS_ITEST: + isram_memcpy(val, address, 2); + return true; + default: /* invalid access */ + return false; + } +} + +/* + * decode the instruction if we are printing out the trace, as it + * makes things easier to follow, without running it through objdump + * These are the normal instructions which cause change of flow, which + * would be at the source of the trace buffer + */ +#if defined(CONFIG_DEBUG_VERBOSE) && defined(CONFIG_DEBUG_BFIN_HWTRACE_ON) +static void decode_instruction(unsigned short *address) +{ + unsigned short opcode; + + if (get_instruction(&opcode, address)) { + if (opcode == 0x0010) + verbose_printk("RTS"); + else if (opcode == 0x0011) + verbose_printk("RTI"); + else if (opcode == 0x0012) + verbose_printk("RTX"); + else if (opcode == 0x0013) + verbose_printk("RTN"); + else if (opcode == 0x0014) + verbose_printk("RTE"); + else if (opcode == 0x0025) + verbose_printk("EMUEXCPT"); + else if (opcode >= 0x0040 && opcode <= 0x0047) + verbose_printk("STI R%i", opcode & 7); + else if (opcode >= 0x0050 && opcode <= 0x0057) + verbose_printk("JUMP (P%i)", opcode & 7); + else if (opcode >= 0x0060 && opcode <= 0x0067) + verbose_printk("CALL (P%i)", opcode & 7); + else if (opcode >= 0x0070 && opcode <= 0x0077) + verbose_printk("CALL (PC+P%i)", opcode & 7); + else if (opcode >= 0x0080 && opcode <= 0x0087) + verbose_printk("JUMP (PC+P%i)", opcode & 7); + else if (opcode >= 0x0090 && opcode <= 0x009F) + verbose_printk("RAISE 0x%x", opcode & 0xF); + else if (opcode >= 0x00A0 && opcode <= 0x00AF) + verbose_printk("EXCPT 0x%x", opcode & 0xF); + else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF)) + verbose_printk("IF !CC JUMP"); + else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff)) + verbose_printk("IF CC JUMP"); + else if (opcode >= 0x2000 && opcode <= 0x2fff) + verbose_printk("JUMP.S"); + else if (opcode >= 0xe080 && opcode <= 0xe0ff) + verbose_printk("LSETUP"); + else if (opcode >= 0xe200 && opcode <= 0xe2ff) + verbose_printk("JUMP.L"); + else if (opcode >= 0xe300 && opcode <= 0xe3ff) + verbose_printk("CALL pcrel"); + else + verbose_printk("0x%04x", opcode); + } + +} +#endif + +void dump_bfin_trace_buffer(void) +{ +#ifdef CONFIG_DEBUG_VERBOSE +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON + int tflags, i = 0; + char buf[150]; + unsigned short *addr; +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND + int j, index; +#endif + + trace_buffer_save(tflags); + + printk(KERN_NOTICE "Hardware Trace:\n"); + +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND + printk(KERN_NOTICE "WARNING: Expanded trace turned on - can not trace exceptions\n"); +#endif + + if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) { + for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) { + decode_address(buf, (unsigned long)bfin_read_TBUF()); + printk(KERN_NOTICE "%4i Target : %s\n", i, buf); + addr = (unsigned short *)bfin_read_TBUF(); + decode_address(buf, (unsigned long)addr); + printk(KERN_NOTICE " Source : %s ", buf); + decode_instruction(addr); + printk("\n"); + } + } + +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND + if (trace_buff_offset) + index = trace_buff_offset / 4; + else + index = EXPAND_LEN; + + j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128; + while (j) { + decode_address(buf, software_trace_buff[index]); + printk(KERN_NOTICE "%4i Target : %s\n", i, buf); + index -= 1; + if (index < 0) + index = EXPAND_LEN; + decode_address(buf, software_trace_buff[index]); + printk(KERN_NOTICE " Source : %s ", buf); + decode_instruction((unsigned short *)software_trace_buff[index]); + printk("\n"); + index -= 1; + if (index < 0) + index = EXPAND_LEN; + j--; + i++; + } +#endif + + trace_buffer_restore(tflags); +#endif +#endif +} +EXPORT_SYMBOL(dump_bfin_trace_buffer); + +void dump_bfin_process(struct pt_regs *fp) +{ +#ifdef CONFIG_DEBUG_VERBOSE + /* We should be able to look at fp->ipend, but we don't push it on the + * stack all the time, so do this until we fix that */ + unsigned int context = bfin_read_IPEND(); + + if (oops_in_progress) + verbose_printk(KERN_EMERG "Kernel OOPS in progress\n"); + + if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) + verbose_printk(KERN_NOTICE "HW Error context\n"); + else if (context & 0x0020) + verbose_printk(KERN_NOTICE "Deferred Exception context\n"); + else if (context & 0x3FC0) + verbose_printk(KERN_NOTICE "Interrupt context\n"); + else if (context & 0x4000) + verbose_printk(KERN_NOTICE "Deferred Interrupt context\n"); + else if (context & 0x8000) + verbose_printk(KERN_NOTICE "Kernel process context\n"); + + /* Because we are crashing, and pointers could be bad, we check things + * pretty closely before we use them + */ + if ((unsigned long)current >= FIXED_CODE_START && + !((unsigned long)current & 0x3) && current->pid) { + verbose_printk(KERN_NOTICE "CURRENT PROCESS:\n"); + if (current->comm >= (char *)FIXED_CODE_START) + verbose_printk(KERN_NOTICE "COMM=%s PID=%d", + current->comm, current->pid); + else + verbose_printk(KERN_NOTICE "COMM= invalid"); + + printk(KERN_CONT " CPU=%d\n", current_thread_info()->cpu); + if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START) + verbose_printk(KERN_NOTICE + "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" + " BSS = 0x%p-0x%p USER-STACK = 0x%p\n\n", + (void *)current->mm->start_code, + (void *)current->mm->end_code, + (void *)current->mm->start_data, + (void *)current->mm->end_data, + (void *)current->mm->end_data, + (void *)current->mm->brk, + (void *)current->mm->start_stack); + else + verbose_printk(KERN_NOTICE "invalid mm\n"); + } else + verbose_printk(KERN_NOTICE + "No Valid process in current context\n"); +#endif +} + +void dump_bfin_mem(struct pt_regs *fp) +{ +#ifdef CONFIG_DEBUG_VERBOSE + unsigned short *addr, *erraddr, val = 0, err = 0; + char sti = 0, buf[6]; + + erraddr = (void *)fp->pc; + + verbose_printk(KERN_NOTICE "return address: [0x%p]; contents of:", erraddr); + + for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10; + addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10; + addr++) { + if (!((unsigned long)addr & 0xF)) + verbose_printk(KERN_NOTICE "0x%p: ", addr); + + if (!get_instruction(&val, addr)) { + val = 0; + sprintf(buf, "????"); + } else + sprintf(buf, "%04x", val); + + if (addr == erraddr) { + verbose_printk("[%s]", buf); + err = val; + } else + verbose_printk(" %s ", buf); + + /* Do any previous instructions turn on interrupts? */ + if (addr <= erraddr && /* in the past */ + ((val >= 0x0040 && val <= 0x0047) || /* STI instruction */ + val == 0x017b)) /* [SP++] = RETI */ + sti = 1; + } + + verbose_printk("\n"); + + /* Hardware error interrupts can be deferred */ + if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR && + oops_in_progress)){ + verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n"); +#ifndef CONFIG_DEBUG_HWERR + verbose_printk(KERN_NOTICE +"The remaining message may be meaningless\n" +"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n"); +#else + /* If we are handling only one peripheral interrupt + * and current mm and pid are valid, and the last error + * was in that user space process's text area + * print it out - because that is where the problem exists + */ + if ((!(((fp)->ipend & ~0x30) & (((fp)->ipend & ~0x30) - 1))) && + (current->pid && current->mm)) { + /* And the last RETI points to the current userspace context */ + if ((fp + 1)->pc >= current->mm->start_code && + (fp + 1)->pc <= current->mm->end_code) { + verbose_printk(KERN_NOTICE "It might be better to look around here :\n"); + verbose_printk(KERN_NOTICE "-------------------------------------------\n"); + show_regs(fp + 1); + verbose_printk(KERN_NOTICE "-------------------------------------------\n"); + } + } +#endif + } +#endif +} + +void show_regs(struct pt_regs *fp) +{ +#ifdef CONFIG_DEBUG_VERBOSE + char buf[150]; + struct irqaction *action; + unsigned int i; + unsigned long flags = 0; + unsigned int cpu = raw_smp_processor_id(); + unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic(); + + verbose_printk(KERN_NOTICE "\n"); + if (CPUID != bfin_cpuid()) + verbose_printk(KERN_NOTICE "Compiled for cpu family 0x%04x (Rev %d), " + "but running on:0x%04x (Rev %d)\n", + CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid()); + + verbose_printk(KERN_NOTICE "ADSP-%s-0.%d", + CPU, bfin_compiled_revid()); + + if (bfin_compiled_revid() != bfin_revid()) + verbose_printk("(Detected 0.%d)", bfin_revid()); + + verbose_printk(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n", + get_cclk()/1000000, get_sclk()/1000000, +#ifdef CONFIG_MPU + "mpu on" +#else + "mpu off" +#endif + ); + + verbose_printk(KERN_NOTICE "%s", linux_banner); + + verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n", print_tainted()); + verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx IMASK: %04lx SYSCFG: %04lx\n", + (long)fp->seqstat, fp->ipend, cpu_pda[raw_smp_processor_id()].ex_imask, fp->syscfg); + if (fp->ipend & EVT_IRPTEN) + verbose_printk(KERN_NOTICE " Global Interrupts Disabled (IPEND[4])\n"); + if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 | + EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR))) + verbose_printk(KERN_NOTICE " Peripheral interrupts masked off\n"); + if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14))) + verbose_printk(KERN_NOTICE " Kernel interrupts masked off\n"); + if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) { + verbose_printk(KERN_NOTICE " HWERRCAUSE: 0x%lx\n", + (fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14); +#ifdef EBIU_ERRMST + /* If the error was from the EBIU, print it out */ + if (bfin_read_EBIU_ERRMST() & CORE_ERROR) { + verbose_printk(KERN_NOTICE " EBIU Error Reason : 0x%04x\n", + bfin_read_EBIU_ERRMST()); + verbose_printk(KERN_NOTICE " EBIU Error Address : 0x%08x\n", + bfin_read_EBIU_ERRADD()); + } +#endif + } + verbose_printk(KERN_NOTICE " EXCAUSE : 0x%lx\n", + fp->seqstat & SEQSTAT_EXCAUSE); + for (i = 2; i <= 15 ; i++) { + if (fp->ipend & (1 << i)) { + if (i != 4) { + decode_address(buf, bfin_read32(EVT0 + 4*i)); + verbose_printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf); + } else + verbose_printk(KERN_NOTICE " interrupts disabled\n"); + } + } + + /* if no interrupts are going off, don't print this out */ + if (fp->ipend & ~0x3F) { + for (i = 0; i < (NR_IRQS - 1); i++) { + if (!in_atomic) + raw_spin_lock_irqsave(&irq_desc[i].lock, flags); + + action = irq_desc[i].action; + if (!action) + goto unlock; + + decode_address(buf, (unsigned int)action->handler); + verbose_printk(KERN_NOTICE " logical irq %3d mapped : %s", i, buf); + for (action = action->next; action; action = action->next) { + decode_address(buf, (unsigned int)action->handler); + verbose_printk(", %s", buf); + } + verbose_printk("\n"); +unlock: + if (!in_atomic) + raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags); + } + } + + decode_address(buf, fp->rete); + verbose_printk(KERN_NOTICE " RETE: %s\n", buf); + decode_address(buf, fp->retn); + verbose_printk(KERN_NOTICE " RETN: %s\n", buf); + decode_address(buf, fp->retx); + verbose_printk(KERN_NOTICE " RETX: %s\n", buf); + decode_address(buf, fp->rets); + verbose_printk(KERN_NOTICE " RETS: %s\n", buf); + decode_address(buf, fp->pc); + verbose_printk(KERN_NOTICE " PC : %s\n", buf); + + if (((long)fp->seqstat & SEQSTAT_EXCAUSE) && + (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) { + decode_address(buf, cpu_pda[cpu].dcplb_fault_addr); + verbose_printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf); + decode_address(buf, cpu_pda[cpu].icplb_fault_addr); + verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf); + } + + verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n"); + verbose_printk(KERN_NOTICE " R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n", + fp->r0, fp->r1, fp->r2, fp->r3); + verbose_printk(KERN_NOTICE " R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n", + fp->r4, fp->r5, fp->r6, fp->r7); + verbose_printk(KERN_NOTICE " P0 : %08lx P1 : %08lx P2 : %08lx P3 : %08lx\n", + fp->p0, fp->p1, fp->p2, fp->p3); + verbose_printk(KERN_NOTICE " P4 : %08lx P5 : %08lx FP : %08lx SP : %08lx\n", + fp->p4, fp->p5, fp->fp, (long)fp); + verbose_printk(KERN_NOTICE " LB0: %08lx LT0: %08lx LC0: %08lx\n", + fp->lb0, fp->lt0, fp->lc0); + verbose_printk(KERN_NOTICE " LB1: %08lx LT1: %08lx LC1: %08lx\n", + fp->lb1, fp->lt1, fp->lc1); + verbose_printk(KERN_NOTICE " B0 : %08lx L0 : %08lx M0 : %08lx I0 : %08lx\n", + fp->b0, fp->l0, fp->m0, fp->i0); + verbose_printk(KERN_NOTICE " B1 : %08lx L1 : %08lx M1 : %08lx I1 : %08lx\n", + fp->b1, fp->l1, fp->m1, fp->i1); + verbose_printk(KERN_NOTICE " B2 : %08lx L2 : %08lx M2 : %08lx I2 : %08lx\n", + fp->b2, fp->l2, fp->m2, fp->i2); + verbose_printk(KERN_NOTICE " B3 : %08lx L3 : %08lx M3 : %08lx I3 : %08lx\n", + fp->b3, fp->l3, fp->m3, fp->i3); + verbose_printk(KERN_NOTICE "A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", + fp->a0w, fp->a0x, fp->a1w, fp->a1x); + + verbose_printk(KERN_NOTICE "USP : %08lx ASTAT: %08lx\n", + rdusp(), fp->astat); + + verbose_printk(KERN_NOTICE "\n"); +#endif +} diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index ba70c4bc2699..891cc39f7eec 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -1,20 +1,16 @@ /* - * Copyright 2004-2009 Analog Devices Inc. + * Main exception handling logic. + * + * Copyright 2004-2010 Analog Devices Inc. * * Licensed under the GPL-2 or later */ #include <linux/bug.h> #include <linux/uaccess.h> -#include <linux/interrupt.h> #include <linux/module.h> -#include <linux/kallsyms.h> -#include <linux/fs.h> -#include <linux/rbtree.h> #include <asm/traps.h> -#include <asm/cacheflush.h> #include <asm/cplb.h> -#include <asm/dma.h> #include <asm/blackfin.h> #include <asm/irq_handler.h> #include <linux/irq.h> @@ -62,194 +58,6 @@ void __init trap_init(void) CSYNC(); } -static void decode_address(char *buf, unsigned long address) -{ -#ifdef CONFIG_DEBUG_VERBOSE - struct task_struct *p; - struct mm_struct *mm; - unsigned long flags, offset; - unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic(); - struct rb_node *n; - -#ifdef CONFIG_KALLSYMS - unsigned long symsize; - const char *symname; - char *modname; - char *delim = ":"; - char namebuf[128]; -#endif - - buf += sprintf(buf, "<0x%08lx> ", address); - -#ifdef CONFIG_KALLSYMS - /* look up the address and see if we are in kernel space */ - symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf); - - if (symname) { - /* yeah! kernel space! */ - if (!modname) - modname = delim = ""; - sprintf(buf, "{ %s%s%s%s + 0x%lx }", - delim, modname, delim, symname, - (unsigned long)offset); - return; - } -#endif - - if (address >= FIXED_CODE_START && address < FIXED_CODE_END) { - /* Problem in fixed code section? */ - strcat(buf, "/* Maybe fixed code section */"); - return; - - } else if (address < CONFIG_BOOT_LOAD) { - /* Problem somewhere before the kernel start address */ - strcat(buf, "/* Maybe null pointer? */"); - return; - - } else if (address >= COREMMR_BASE) { - strcat(buf, "/* core mmrs */"); - return; - - } else if (address >= SYSMMR_BASE) { - strcat(buf, "/* system mmrs */"); - return; - - } else if (address >= L1_ROM_START && address < L1_ROM_START + L1_ROM_LENGTH) { - strcat(buf, "/* on-chip L1 ROM */"); - return; - } - - /* - * Don't walk any of the vmas if we are oopsing, it has been known - * to cause problems - corrupt vmas (kernel crashes) cause double faults - */ - if (oops_in_progress) { - strcat(buf, "/* kernel dynamic memory (maybe user-space) */"); - return; - } - - /* looks like we're off in user-land, so let's walk all the - * mappings of all our processes and see if we can't be a whee - * bit more specific - */ - write_lock_irqsave(&tasklist_lock, flags); - for_each_process(p) { - mm = (in_atomic ? p->mm : get_task_mm(p)); - if (!mm) - continue; - - if (!down_read_trylock(&mm->mmap_sem)) { - if (!in_atomic) - mmput(mm); - continue; - } - - for (n = rb_first(&mm->mm_rb); n; n = rb_next(n)) { - struct vm_area_struct *vma; - - vma = rb_entry(n, struct vm_area_struct, vm_rb); - - if (address >= vma->vm_start && address < vma->vm_end) { - char _tmpbuf[256]; - char *name = p->comm; - struct file *file = vma->vm_file; - - if (file) { - char *d_name = d_path(&file->f_path, _tmpbuf, - sizeof(_tmpbuf)); - if (!IS_ERR(d_name)) - name = d_name; - } - - /* FLAT does not have its text aligned to the start of - * the map while FDPIC ELF does ... - */ - - /* before we can check flat/fdpic, we need to - * make sure current is valid - */ - if ((unsigned long)current >= FIXED_CODE_START && - !((unsigned long)current & 0x3)) { - if (current->mm && - (address > current->mm->start_code) && - (address < current->mm->end_code)) - offset = address - current->mm->start_code; - else - offset = (address - vma->vm_start) + - (vma->vm_pgoff << PAGE_SHIFT); - - sprintf(buf, "[ %s + 0x%lx ]", name, offset); - } else - sprintf(buf, "[ %s vma:0x%lx-0x%lx]", - name, vma->vm_start, vma->vm_end); - - up_read(&mm->mmap_sem); - if (!in_atomic) - mmput(mm); - - if (buf[0] == '\0') - sprintf(buf, "[ %s ] dynamic memory", name); - - goto done; - } - } - - up_read(&mm->mmap_sem); - if (!in_atomic) - mmput(mm); - } - - /* - * we were unable to find this address anywhere, - * or some MMs were skipped because they were in use. - */ - sprintf(buf, "/* kernel dynamic memory */"); - -done: - write_unlock_irqrestore(&tasklist_lock, flags); -#else - sprintf(buf, " "); -#endif -} - -asmlinkage void double_fault_c(struct pt_regs *fp) -{ -#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON - int j; - trace_buffer_save(j); -#endif - - console_verbose(); - oops_in_progress = 1; -#ifdef CONFIG_DEBUG_VERBOSE - printk(KERN_EMERG "Double Fault\n"); -#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT - if (((long)fp->seqstat & SEQSTAT_EXCAUSE) == VEC_UNCOV) { - unsigned int cpu = raw_smp_processor_id(); - char buf[150]; - decode_address(buf, cpu_pda[cpu].retx_doublefault); - printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n", - (unsigned int)cpu_pda[cpu].seqstat_doublefault & SEQSTAT_EXCAUSE, buf); - decode_address(buf, cpu_pda[cpu].dcplb_doublefault_addr); - printk(KERN_NOTICE " DCPLB_FAULT_ADDR: %s\n", buf); - decode_address(buf, cpu_pda[cpu].icplb_doublefault_addr); - printk(KERN_NOTICE " ICPLB_FAULT_ADDR: %s\n", buf); - - decode_address(buf, fp->retx); - printk(KERN_NOTICE "The instruction at %s caused a double exception\n", buf); - } else -#endif - { - dump_bfin_process(fp); - dump_bfin_mem(fp); - show_regs(fp); - dump_bfin_trace_buffer(); - } -#endif - panic("Double Fault - unrecoverable event"); - -} - static int kernel_mode_regs(struct pt_regs *regs) { return regs->ipend & 0xffc0; @@ -672,659 +480,44 @@ asmlinkage notrace void trap_c(struct pt_regs *fp) trace_buffer_restore(j); } -/* Typical exception handling routines */ - -#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1) - -/* - * Similar to get_user, do some address checking, then dereference - * Return true on success, false on bad address - */ -static bool get_instruction(unsigned short *val, unsigned short *address) -{ - unsigned long addr = (unsigned long)address; - - /* Check for odd addresses */ - if (addr & 0x1) - return false; - - /* MMR region will never have instructions */ - if (addr >= SYSMMR_BASE) - return false; - - switch (bfin_mem_access_type(addr, 2)) { - case BFIN_MEM_ACCESS_CORE: - case BFIN_MEM_ACCESS_CORE_ONLY: - *val = *address; - return true; - case BFIN_MEM_ACCESS_DMA: - dma_memcpy(val, address, 2); - return true; - case BFIN_MEM_ACCESS_ITEST: - isram_memcpy(val, address, 2); - return true; - default: /* invalid access */ - return false; - } -} - -/* - * decode the instruction if we are printing out the trace, as it - * makes things easier to follow, without running it through objdump - * These are the normal instructions which cause change of flow, which - * would be at the source of the trace buffer - */ -#if defined(CONFIG_DEBUG_VERBOSE) && defined(CONFIG_DEBUG_BFIN_HWTRACE_ON) -static void decode_instruction(unsigned short *address) -{ - unsigned short opcode; - - if (get_instruction(&opcode, address)) { - if (opcode == 0x0010) - verbose_printk("RTS"); - else if (opcode == 0x0011) - verbose_printk("RTI"); - else if (opcode == 0x0012) - verbose_printk("RTX"); - else if (opcode == 0x0013) - verbose_printk("RTN"); - else if (opcode == 0x0014) - verbose_printk("RTE"); - else if (opcode == 0x0025) - verbose_printk("EMUEXCPT"); - else if (opcode >= 0x0040 && opcode <= 0x0047) - verbose_printk("STI R%i", opcode & 7); - else if (opcode >= 0x0050 && opcode <= 0x0057) - verbose_printk("JUMP (P%i)", opcode & 7); - else if (opcode >= 0x0060 && opcode <= 0x0067) - verbose_printk("CALL (P%i)", opcode & 7); - else if (opcode >= 0x0070 && opcode <= 0x0077) - verbose_printk("CALL (PC+P%i)", opcode & 7); - else if (opcode >= 0x0080 && opcode <= 0x0087) - verbose_printk("JUMP (PC+P%i)", opcode & 7); - else if (opcode >= 0x0090 && opcode <= 0x009F) - verbose_printk("RAISE 0x%x", opcode & 0xF); - else if (opcode >= 0x00A0 && opcode <= 0x00AF) - verbose_printk("EXCPT 0x%x", opcode & 0xF); - else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF)) - verbose_printk("IF !CC JUMP"); - else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff)) - verbose_printk("IF CC JUMP"); - else if (opcode >= 0x2000 && opcode <= 0x2fff) - verbose_printk("JUMP.S"); - else if (opcode >= 0xe080 && opcode <= 0xe0ff) - verbose_printk("LSETUP"); - else if (opcode >= 0xe200 && opcode <= 0xe2ff) - verbose_printk("JUMP.L"); - else if (opcode >= 0xe300 && opcode <= 0xe3ff) - verbose_printk("CALL pcrel"); - else - verbose_printk("0x%04x", opcode); - } - -} -#endif - -void dump_bfin_trace_buffer(void) -{ -#ifdef CONFIG_DEBUG_VERBOSE -#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON - int tflags, i = 0; - char buf[150]; - unsigned short *addr; -#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND - int j, index; -#endif - - trace_buffer_save(tflags); - - printk(KERN_NOTICE "Hardware Trace:\n"); - -#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND - printk(KERN_NOTICE "WARNING: Expanded trace turned on - can not trace exceptions\n"); -#endif - - if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) { - for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) { - decode_address(buf, (unsigned long)bfin_read_TBUF()); - printk(KERN_NOTICE "%4i Target : %s\n", i, buf); - addr = (unsigned short *)bfin_read_TBUF(); - decode_address(buf, (unsigned long)addr); - printk(KERN_NOTICE " Source : %s ", buf); - decode_instruction(addr); - printk("\n"); - } - } - -#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND - if (trace_buff_offset) - index = trace_buff_offset / 4; - else - index = EXPAND_LEN; - - j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128; - while (j) { - decode_address(buf, software_trace_buff[index]); - printk(KERN_NOTICE "%4i Target : %s\n", i, buf); - index -= 1; - if (index < 0 ) - index = EXPAND_LEN; - decode_address(buf, software_trace_buff[index]); - printk(KERN_NOTICE " Source : %s ", buf); - decode_instruction((unsigned short *)software_trace_buff[index]); - printk("\n"); - index -= 1; - if (index < 0) - index = EXPAND_LEN; - j--; - i++; - } -#endif - - trace_buffer_restore(tflags); -#endif -#endif -} -EXPORT_SYMBOL(dump_bfin_trace_buffer); - -#ifdef CONFIG_BUG -int is_valid_bugaddr(unsigned long addr) -{ - unsigned short opcode; - - if (!get_instruction(&opcode, (unsigned short *)addr)) - return 0; - - return opcode == BFIN_BUG_OPCODE; -} -#endif - -/* - * Checks to see if the address pointed to is either a - * 16-bit CALL instruction, or a 32-bit CALL instruction - */ -static bool is_bfin_call(unsigned short *addr) -{ - unsigned short opcode = 0, *ins_addr; - ins_addr = (unsigned short *)addr; - - if (!get_instruction(&opcode, ins_addr)) - return false; - - if ((opcode >= 0x0060 && opcode <= 0x0067) || - (opcode >= 0x0070 && opcode <= 0x0077)) - return true; - - ins_addr--; - if (!get_instruction(&opcode, ins_addr)) - return false; - - if (opcode >= 0xE300 && opcode <= 0xE3FF) - return true; - - return false; - -} - -void show_stack(struct task_struct *task, unsigned long *stack) -{ -#ifdef CONFIG_PRINTK - unsigned int *addr, *endstack, *fp = 0, *frame; - unsigned short *ins_addr; - char buf[150]; - unsigned int i, j, ret_addr, frame_no = 0; - - /* - * If we have been passed a specific stack, use that one otherwise - * if we have been passed a task structure, use that, otherwise - * use the stack of where the variable "stack" exists - */ - - if (stack == NULL) { - if (task) { - /* We know this is a kernel stack, so this is the start/end */ - stack = (unsigned long *)task->thread.ksp; - endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE); - } else { - /* print out the existing stack info */ - stack = (unsigned long *)&stack; - endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack); - } - } else - endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack); - - printk(KERN_NOTICE "Stack info:\n"); - decode_address(buf, (unsigned int)stack); - printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf); - - if (!access_ok(VERIFY_READ, stack, (unsigned int)endstack - (unsigned int)stack)) { - printk(KERN_NOTICE "Invalid stack pointer\n"); - return; - } - - /* First thing is to look for a frame pointer */ - for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) { - if (*addr & 0x1) - continue; - ins_addr = (unsigned short *)*addr; - ins_addr--; - if (is_bfin_call(ins_addr)) - fp = addr - 1; - - if (fp) { - /* Let's check to see if it is a frame pointer */ - while (fp >= (addr - 1) && fp < endstack - && fp && ((unsigned int) fp & 0x3) == 0) - fp = (unsigned int *)*fp; - if (fp == 0 || fp == endstack) { - fp = addr - 1; - break; - } - fp = 0; - } - } - if (fp) { - frame = fp; - printk(KERN_NOTICE " FP: (0x%p)\n", fp); - } else - frame = 0; - - /* - * Now that we think we know where things are, we - * walk the stack again, this time printing things out - * incase there is no frame pointer, we still look for - * valid return addresses - */ - - /* First time print out data, next time, print out symbols */ - for (j = 0; j <= 1; j++) { - if (j) - printk(KERN_NOTICE "Return addresses in stack:\n"); - else - printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack); - - fp = frame; - frame_no = 0; - - for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0; - addr < endstack; addr++, i++) { - - ret_addr = 0; - if (!j && i % 8 == 0) - printk(KERN_NOTICE "%p:",addr); - - /* if it is an odd address, or zero, just skip it */ - if (*addr & 0x1 || !*addr) - goto print; - - ins_addr = (unsigned short *)*addr; - - /* Go back one instruction, and see if it is a CALL */ - ins_addr--; - ret_addr = is_bfin_call(ins_addr); - print: - if (!j && stack == (unsigned long *)addr) - printk("[%08x]", *addr); - else if (ret_addr) - if (j) { - decode_address(buf, (unsigned int)*addr); - if (frame == addr) { - printk(KERN_NOTICE " frame %2i : %s\n", frame_no, buf); - continue; - } - printk(KERN_NOTICE " address : %s\n", buf); - } else - printk("<%08x>", *addr); - else if (fp == addr) { - if (j) - frame = addr+1; - else - printk("(%08x)", *addr); - - fp = (unsigned int *)*addr; - frame_no++; - - } else if (!j) - printk(" %08x ", *addr); - } - if (!j) - printk("\n"); - } -#endif -} -EXPORT_SYMBOL(show_stack); - -void dump_stack(void) +asmlinkage void double_fault_c(struct pt_regs *fp) { - unsigned long stack; #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON - int tflags; + int j; + trace_buffer_save(j); #endif - trace_buffer_save(tflags); - dump_bfin_trace_buffer(); - show_stack(current, &stack); - trace_buffer_restore(tflags); -} -EXPORT_SYMBOL(dump_stack); -void dump_bfin_process(struct pt_regs *fp) -{ + console_verbose(); + oops_in_progress = 1; #ifdef CONFIG_DEBUG_VERBOSE - /* We should be able to look at fp->ipend, but we don't push it on the - * stack all the time, so do this until we fix that */ - unsigned int context = bfin_read_IPEND(); - - if (oops_in_progress) - verbose_printk(KERN_EMERG "Kernel OOPS in progress\n"); - - if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) - verbose_printk(KERN_NOTICE "HW Error context\n"); - else if (context & 0x0020) - verbose_printk(KERN_NOTICE "Deferred Exception context\n"); - else if (context & 0x3FC0) - verbose_printk(KERN_NOTICE "Interrupt context\n"); - else if (context & 0x4000) - verbose_printk(KERN_NOTICE "Deferred Interrupt context\n"); - else if (context & 0x8000) - verbose_printk(KERN_NOTICE "Kernel process context\n"); - - /* Because we are crashing, and pointers could be bad, we check things - * pretty closely before we use them - */ - if ((unsigned long)current >= FIXED_CODE_START && - !((unsigned long)current & 0x3) && current->pid) { - verbose_printk(KERN_NOTICE "CURRENT PROCESS:\n"); - if (current->comm >= (char *)FIXED_CODE_START) - verbose_printk(KERN_NOTICE "COMM=%s PID=%d", - current->comm, current->pid); - else - verbose_printk(KERN_NOTICE "COMM= invalid"); + printk(KERN_EMERG "Double Fault\n"); +#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT + if (((long)fp->seqstat & SEQSTAT_EXCAUSE) == VEC_UNCOV) { + unsigned int cpu = raw_smp_processor_id(); + char buf[150]; + decode_address(buf, cpu_pda[cpu].retx_doublefault); + printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n", + (unsigned int)cpu_pda[cpu].seqstat_doublefault & SEQSTAT_EXCAUSE, buf); + decode_address(buf, cpu_pda[cpu].dcplb_doublefault_addr); + printk(KERN_NOTICE " DCPLB_FAULT_ADDR: %s\n", buf); + decode_address(buf, cpu_pda[cpu].icplb_doublefault_addr); + printk(KERN_NOTICE " ICPLB_FAULT_ADDR: %s\n", buf); - printk(KERN_CONT " CPU=%d\n", current_thread_info()->cpu); - if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START) - verbose_printk(KERN_NOTICE - "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" - " BSS = 0x%p-0x%p USER-STACK = 0x%p\n\n", - (void *)current->mm->start_code, - (void *)current->mm->end_code, - (void *)current->mm->start_data, - (void *)current->mm->end_data, - (void *)current->mm->end_data, - (void *)current->mm->brk, - (void *)current->mm->start_stack); - else - verbose_printk(KERN_NOTICE "invalid mm\n"); + decode_address(buf, fp->retx); + printk(KERN_NOTICE "The instruction at %s caused a double exception\n", buf); } else - verbose_printk(KERN_NOTICE - "No Valid process in current context\n"); -#endif -} - -void dump_bfin_mem(struct pt_regs *fp) -{ -#ifdef CONFIG_DEBUG_VERBOSE - unsigned short *addr, *erraddr, val = 0, err = 0; - char sti = 0, buf[6]; - - erraddr = (void *)fp->pc; - - verbose_printk(KERN_NOTICE "return address: [0x%p]; contents of:", erraddr); - - for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10; - addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10; - addr++) { - if (!((unsigned long)addr & 0xF)) - verbose_printk(KERN_NOTICE "0x%p: ", addr); - - if (!get_instruction(&val, addr)) { - val = 0; - sprintf(buf, "????"); - } else - sprintf(buf, "%04x", val); - - if (addr == erraddr) { - verbose_printk("[%s]", buf); - err = val; - } else - verbose_printk(" %s ", buf); - - /* Do any previous instructions turn on interrupts? */ - if (addr <= erraddr && /* in the past */ - ((val >= 0x0040 && val <= 0x0047) || /* STI instruction */ - val == 0x017b)) /* [SP++] = RETI */ - sti = 1; - } - - verbose_printk("\n"); - - /* Hardware error interrupts can be deferred */ - if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR && - oops_in_progress)){ - verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n"); -#ifndef CONFIG_DEBUG_HWERR - verbose_printk(KERN_NOTICE -"The remaining message may be meaningless\n" -"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n"); -#else - /* If we are handling only one peripheral interrupt - * and current mm and pid are valid, and the last error - * was in that user space process's text area - * print it out - because that is where the problem exists - */ - if ((!(((fp)->ipend & ~0x30) & (((fp)->ipend & ~0x30) - 1))) && - (current->pid && current->mm)) { - /* And the last RETI points to the current userspace context */ - if ((fp + 1)->pc >= current->mm->start_code && - (fp + 1)->pc <= current->mm->end_code) { - verbose_printk(KERN_NOTICE "It might be better to look around here :\n"); - verbose_printk(KERN_NOTICE "-------------------------------------------\n"); - show_regs(fp + 1); - verbose_printk(KERN_NOTICE "-------------------------------------------\n"); - } - } -#endif - } -#endif -} - -void show_regs(struct pt_regs *fp) -{ -#ifdef CONFIG_DEBUG_VERBOSE - char buf [150]; - struct irqaction *action; - unsigned int i; - unsigned long flags = 0; - unsigned int cpu = raw_smp_processor_id(); - unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic(); - - verbose_printk(KERN_NOTICE "\n"); - if (CPUID != bfin_cpuid()) - verbose_printk(KERN_NOTICE "Compiled for cpu family 0x%04x (Rev %d), " - "but running on:0x%04x (Rev %d)\n", - CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid()); - - verbose_printk(KERN_NOTICE "ADSP-%s-0.%d", - CPU, bfin_compiled_revid()); - - if (bfin_compiled_revid() != bfin_revid()) - verbose_printk("(Detected 0.%d)", bfin_revid()); - - verbose_printk(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n", - get_cclk()/1000000, get_sclk()/1000000, -#ifdef CONFIG_MPU - "mpu on" -#else - "mpu off" #endif - ); - - verbose_printk(KERN_NOTICE "%s", linux_banner); - - verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n", print_tainted()); - verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx IMASK: %04lx SYSCFG: %04lx\n", - (long)fp->seqstat, fp->ipend, cpu_pda[raw_smp_processor_id()].ex_imask, fp->syscfg); - if (fp->ipend & EVT_IRPTEN) - verbose_printk(KERN_NOTICE " Global Interrupts Disabled (IPEND[4])\n"); - if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 | - EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR))) - verbose_printk(KERN_NOTICE " Peripheral interrupts masked off\n"); - if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14))) - verbose_printk(KERN_NOTICE " Kernel interrupts masked off\n"); - if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) { - verbose_printk(KERN_NOTICE " HWERRCAUSE: 0x%lx\n", - (fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14); -#ifdef EBIU_ERRMST - /* If the error was from the EBIU, print it out */ - if (bfin_read_EBIU_ERRMST() & CORE_ERROR) { - verbose_printk(KERN_NOTICE " EBIU Error Reason : 0x%04x\n", - bfin_read_EBIU_ERRMST()); - verbose_printk(KERN_NOTICE " EBIU Error Address : 0x%08x\n", - bfin_read_EBIU_ERRADD()); - } -#endif - } - verbose_printk(KERN_NOTICE " EXCAUSE : 0x%lx\n", - fp->seqstat & SEQSTAT_EXCAUSE); - for (i = 2; i <= 15 ; i++) { - if (fp->ipend & (1 << i)) { - if (i != 4) { - decode_address(buf, bfin_read32(EVT0 + 4*i)); - verbose_printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf); - } else - verbose_printk(KERN_NOTICE " interrupts disabled\n"); - } - } - - /* if no interrupts are going off, don't print this out */ - if (fp->ipend & ~0x3F) { - for (i = 0; i < (NR_IRQS - 1); i++) { - if (!in_atomic) - raw_spin_lock_irqsave(&irq_desc[i].lock, flags); - - action = irq_desc[i].action; - if (!action) - goto unlock; - - decode_address(buf, (unsigned int)action->handler); - verbose_printk(KERN_NOTICE " logical irq %3d mapped : %s", i, buf); - for (action = action->next; action; action = action->next) { - decode_address(buf, (unsigned int)action->handler); - verbose_printk(", %s", buf); - } - verbose_printk("\n"); -unlock: - if (!in_atomic) - raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } - } - - decode_address(buf, fp->rete); - verbose_printk(KERN_NOTICE " RETE: %s\n", buf); - decode_address(buf, fp->retn); - verbose_printk(KERN_NOTICE " RETN: %s\n", buf); - decode_address(buf, fp->retx); - verbose_printk(KERN_NOTICE " RETX: %s\n", buf); - decode_address(buf, fp->rets); - verbose_printk(KERN_NOTICE " RETS: %s\n", buf); - decode_address(buf, fp->pc); - verbose_printk(KERN_NOTICE " PC : %s\n", buf); - - if (((long)fp->seqstat & SEQSTAT_EXCAUSE) && - (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) { - decode_address(buf, cpu_pda[cpu].dcplb_fault_addr); - verbose_printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf); - decode_address(buf, cpu_pda[cpu].icplb_fault_addr); - verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf); + { + dump_bfin_process(fp); + dump_bfin_mem(fp); + show_regs(fp); + dump_bfin_trace_buffer(); } - - verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n"); - verbose_printk(KERN_NOTICE " R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n", - fp->r0, fp->r1, fp->r2, fp->r3); - verbose_printk(KERN_NOTICE " R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n", - fp->r4, fp->r5, fp->r6, fp->r7); - verbose_printk(KERN_NOTICE " P0 : %08lx P1 : %08lx P2 : %08lx P3 : %08lx\n", - fp->p0, fp->p1, fp->p2, fp->p3); - verbose_printk(KERN_NOTICE " P4 : %08lx P5 : %08lx FP : %08lx SP : %08lx\n", - fp->p4, fp->p5, fp->fp, (long)fp); - verbose_printk(KERN_NOTICE " LB0: %08lx LT0: %08lx LC0: %08lx\n", - fp->lb0, fp->lt0, fp->lc0); - verbose_printk(KERN_NOTICE " LB1: %08lx LT1: %08lx LC1: %08lx\n", - fp->lb1, fp->lt1, fp->lc1); - verbose_printk(KERN_NOTICE " B0 : %08lx L0 : %08lx M0 : %08lx I0 : %08lx\n", - fp->b0, fp->l0, fp->m0, fp->i0); - verbose_printk(KERN_NOTICE " B1 : %08lx L1 : %08lx M1 : %08lx I1 : %08lx\n", - fp->b1, fp->l1, fp->m1, fp->i1); - verbose_printk(KERN_NOTICE " B2 : %08lx L2 : %08lx M2 : %08lx I2 : %08lx\n", - fp->b2, fp->l2, fp->m2, fp->i2); - verbose_printk(KERN_NOTICE " B3 : %08lx L3 : %08lx M3 : %08lx I3 : %08lx\n", - fp->b3, fp->l3, fp->m3, fp->i3); - verbose_printk(KERN_NOTICE "A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", - fp->a0w, fp->a0x, fp->a1w, fp->a1x); - - verbose_printk(KERN_NOTICE "USP : %08lx ASTAT: %08lx\n", - rdusp(), fp->astat); - - verbose_printk(KERN_NOTICE "\n"); -#endif -} - -#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1 -asmlinkage int sys_bfin_spinlock(int *spinlock)__attribute__((l1_text)); #endif + panic("Double Fault - unrecoverable event"); -static DEFINE_SPINLOCK(bfin_spinlock_lock); - -asmlinkage int sys_bfin_spinlock(int *p) -{ - int ret, tmp = 0; - - spin_lock(&bfin_spinlock_lock); /* This would also hold kernel preemption. */ - ret = get_user(tmp, p); - if (likely(ret == 0)) { - if (unlikely(tmp)) - ret = 1; - else - put_user(1, p); - } - spin_unlock(&bfin_spinlock_lock); - return ret; } -int bfin_request_exception(unsigned int exception, void (*handler)(void)) -{ - void (*curr_handler)(void); - - if (exception > 0x3F) - return -EINVAL; - - curr_handler = ex_table[exception]; - - if (curr_handler != ex_replaceable) - return -EBUSY; - - ex_table[exception] = handler; - - return 0; -} -EXPORT_SYMBOL(bfin_request_exception); - -int bfin_free_exception(unsigned int exception, void (*handler)(void)) -{ - void (*curr_handler)(void); - - if (exception > 0x3F) - return -EINVAL; - - curr_handler = ex_table[exception]; - - if (curr_handler != handler) - return -EBUSY; - - ex_table[exception] = ex_replaceable; - - return 0; -} -EXPORT_SYMBOL(bfin_free_exception); void panic_cplb_error(int cplb_panic, struct pt_regs *fp) { @@ -1349,3 +542,15 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp) dump_stack(); panic("Unrecoverable event"); } + +#ifdef CONFIG_BUG +int is_valid_bugaddr(unsigned long addr) +{ + unsigned short opcode; + + if (!get_instruction(&opcode, (unsigned short *)addr)) + return 0; + + return opcode == BFIN_BUG_OPCODE; +} +#endif |