diff options
48 files changed, 2851 insertions, 1323 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index ba63619ae5df..2478cca653de 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -459,6 +459,15 @@ config PATA_NETCELL If unsure, say N. +config PATA_NINJA32 + tristate "Ninja32/Delkin Cardbus ATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the Ninja32, Delkin and + possibly other brands of Cardbus ATA adapter + + If unsure, say N. + config PATA_NS87410 tristate "Nat Semi NS87410 PATA support (Experimental)" depends on PCI && EXPERIMENTAL diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index b13feb2c5dae..82550c16818c 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_PATA_IT821X) += pata_it821x.o obj-$(CONFIG_PATA_IT8213) += pata_it8213.o obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o +obj-$(CONFIG_PATA_NINJA32) += pata_ninja32.o obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o obj-$(CONFIG_PATA_NS87415) += pata_ns87415.o obj-$(CONFIG_PATA_OPTI) += pata_opti.o diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 54f38c21dd95..6f089b899a1a 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -198,18 +198,18 @@ enum { }; struct ahci_cmd_hdr { - u32 opts; - u32 status; - u32 tbl_addr; - u32 tbl_addr_hi; - u32 reserved[4]; + __le32 opts; + __le32 status; + __le32 tbl_addr; + __le32 tbl_addr_hi; + __le32 reserved[4]; }; struct ahci_sg { - u32 addr; - u32 addr_hi; - u32 reserved; - u32 flags_size; + __le32 addr; + __le32 addr_hi; + __le32 reserved; + __le32 flags_size; }; struct ahci_host_priv { @@ -597,6 +597,20 @@ static inline void __iomem *ahci_port_base(struct ata_port *ap) return __ahci_port_base(ap->host, ap->port_no); } +static void ahci_enable_ahci(void __iomem *mmio) +{ + u32 tmp; + + /* turn on AHCI_EN */ + tmp = readl(mmio + HOST_CTL); + if (!(tmp & HOST_AHCI_EN)) { + tmp |= HOST_AHCI_EN; + writel(tmp, mmio + HOST_CTL); + tmp = readl(mmio + HOST_CTL); /* flush && sanity check */ + WARN_ON(!(tmp & HOST_AHCI_EN)); + } +} + /** * ahci_save_initial_config - Save and fixup initial config values * @pdev: target PCI device @@ -619,6 +633,9 @@ static void ahci_save_initial_config(struct pci_dev *pdev, u32 cap, port_map; int i; + /* make sure AHCI mode is enabled before accessing CAP */ + ahci_enable_ahci(mmio); + /* Values prefixed with saved_ are written back to host after * reset. Values without are used for driver operation. */ @@ -1036,19 +1053,17 @@ static int ahci_deinit_port(struct ata_port *ap, const char **emsg) static int ahci_reset_controller(struct ata_host *host) { struct pci_dev *pdev = to_pci_dev(host->dev); + struct ahci_host_priv *hpriv = host->private_data; void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; u32 tmp; /* we must be in AHCI mode, before using anything * AHCI-specific, such as HOST_RESET. */ - tmp = readl(mmio + HOST_CTL); - if (!(tmp & HOST_AHCI_EN)) { - tmp |= HOST_AHCI_EN; - writel(tmp, mmio + HOST_CTL); - } + ahci_enable_ahci(mmio); /* global controller reset */ + tmp = readl(mmio + HOST_CTL); if ((tmp & HOST_RESET) == 0) { writel(tmp | HOST_RESET, mmio + HOST_CTL); readl(mmio + HOST_CTL); /* flush */ @@ -1067,8 +1082,7 @@ static int ahci_reset_controller(struct ata_host *host) } /* turn on AHCI mode */ - writel(HOST_AHCI_EN, mmio + HOST_CTL); - (void) readl(mmio + HOST_CTL); /* flush */ + ahci_enable_ahci(mmio); /* some registers might be cleared on reset. restore initial values */ ahci_restore_initial_config(host); @@ -1078,8 +1092,10 @@ static int ahci_reset_controller(struct ata_host *host) /* configure PCS */ pci_read_config_word(pdev, 0x92, &tmp16); - tmp16 |= 0xf; - pci_write_config_word(pdev, 0x92, tmp16); + if ((tmp16 & hpriv->port_map) != hpriv->port_map) { + tmp16 |= hpriv->port_map; + pci_write_config_word(pdev, 0x92, tmp16); + } } return 0; @@ -1480,35 +1496,31 @@ static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf) static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) { struct scatterlist *sg; - struct ahci_sg *ahci_sg; - unsigned int n_sg = 0; + struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; + unsigned int si; VPRINTK("ENTER\n"); /* * Next, the S/G list. */ - ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { dma_addr_t addr = sg_dma_address(sg); u32 sg_len = sg_dma_len(sg); - ahci_sg->addr = cpu_to_le32(addr & 0xffffffff); - ahci_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16); - ahci_sg->flags_size = cpu_to_le32(sg_len - 1); - - ahci_sg++; - n_sg++; + ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff); + ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16); + ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1); } - return n_sg; + return si; } static void ahci_qc_prep(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct ahci_port_priv *pp = ap->private_data; - int is_atapi = is_atapi_taskfile(&qc->tf); + int is_atapi = ata_is_atapi(qc->tf.protocol); void *cmd_tbl; u32 opts; const u32 cmd_fis_len = 5; /* five dwords */ diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 90329982bef7..20534202fc79 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -26,7 +26,7 @@ #include <linux/libata.h> #define DRV_NAME "ata_generic" -#define DRV_VERSION "0.2.13" +#define DRV_VERSION "0.2.15" /* * A generic parallel ATA driver using libata @@ -48,27 +48,47 @@ static int generic_set_mode(struct ata_link *link, struct ata_device **unused) struct ata_port *ap = link->ap; int dma_enabled = 0; struct ata_device *dev; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); /* Bits 5 and 6 indicate if DMA is active on master/slave */ if (ap->ioaddr.bmdma_addr) dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + if (pdev->vendor == PCI_VENDOR_ID_CENATEK) + dma_enabled = 0xFF; + ata_link_for_each_dev(dev, link) { - if (ata_dev_enabled(dev)) { - /* We don't really care */ - dev->pio_mode = XFER_PIO_0; - dev->dma_mode = XFER_MW_DMA_0; - /* We do need the right mode information for DMA or PIO - and this comes from the current configuration flags */ - if (dma_enabled & (1 << (5 + dev->devno))) { - ata_id_to_dma_mode(dev, XFER_MW_DMA_0); - dev->flags &= ~ATA_DFLAG_PIO; - } else { - ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); - dev->xfer_mode = XFER_PIO_0; - dev->xfer_shift = ATA_SHIFT_PIO; - dev->flags |= ATA_DFLAG_PIO; + if (!ata_dev_enabled(dev)) + continue; + + /* We don't really care */ + dev->pio_mode = XFER_PIO_0; + dev->dma_mode = XFER_MW_DMA_0; + /* We do need the right mode information for DMA or PIO + and this comes from the current configuration flags */ + if (dma_enabled & (1 << (5 + dev->devno))) { + unsigned int xfer_mask = ata_id_xfermask(dev->id); + const char *name; + + if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA)) + name = ata_mode_string(xfer_mask); + else { + /* SWDMA perhaps? */ + name = "DMA"; + xfer_mask |= ata_xfer_mode2mask(XFER_MW_DMA_0); } + + ata_dev_printk(dev, KERN_INFO, "configured for %s\n", + name); + + dev->xfer_mode = ata_xfer_mask2mode(xfer_mask); + dev->xfer_shift = ata_xfer_mode2shift(dev->xfer_mode); + dev->flags &= ~ATA_DFLAG_PIO; + } else { + ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; } } return 0; @@ -185,6 +205,7 @@ static struct pci_device_id ata_generic[] = { { PCI_DEVICE(PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561), }, { PCI_DEVICE(PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558), }, + { PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), }, diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index b406b39b878e..a65c8ae5c461 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -101,39 +101,21 @@ enum { ICH5_PMR = 0x90, /* port mapping register */ ICH5_PCS = 0x92, /* port control and status */ PIIX_SCC = 0x0A, /* sub-class code register */ + PIIX_SIDPR_BAR = 5, + PIIX_SIDPR_LEN = 16, + PIIX_SIDPR_IDX = 0, + PIIX_SIDPR_DATA = 4, - PIIX_FLAG_SCR = (1 << 26), /* SCR available */ PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */ PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */ + PIIX_FLAG_SIDPR = (1 << 29), /* SATA idx/data pair regs */ PIIX_PATA_FLAGS = ATA_FLAG_SLAVE_POSS, PIIX_SATA_FLAGS = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR, - /* combined mode. if set, PATA is channel 0. - * if clear, PATA is channel 1. - */ - PIIX_PORT_ENABLED = (1 << 0), - PIIX_PORT_PRESENT = (1 << 4), - PIIX_80C_PRI = (1 << 5) | (1 << 4), PIIX_80C_SEC = (1 << 7) | (1 << 6), - /* controller IDs */ - piix_pata_mwdma = 0, /* PIIX3 MWDMA only */ - piix_pata_33, /* PIIX4 at 33Mhz */ - ich_pata_33, /* ICH up to UDMA 33 only */ - ich_pata_66, /* ICH up to 66 Mhz */ - ich_pata_100, /* ICH up to UDMA 100 */ - ich5_sata, - ich6_sata, - ich6_sata_ahci, - ich6m_sata_ahci, - ich8_sata_ahci, - ich8_2port_sata, - ich8m_apple_sata_ahci, /* locks up on second port enable */ - tolapai_sata_ahci, - piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */ - /* constants for mapping table */ P0 = 0, /* port 0 */ P1 = 1, /* port 1 */ @@ -149,6 +131,24 @@ enum { PIIX_HOST_BROKEN_SUSPEND = (1 << 24), }; +enum piix_controller_ids { + /* controller IDs */ + piix_pata_mwdma, /* PIIX3 MWDMA only */ + piix_pata_33, /* PIIX4 at 33Mhz */ + ich_pata_33, /* ICH up to UDMA 33 only */ + ich_pata_66, /* ICH up to 66 Mhz */ + ich_pata_100, /* ICH up to UDMA 100 */ + ich5_sata, + ich6_sata, + ich6_sata_ahci, + ich6m_sata_ahci, + ich8_sata_ahci, + ich8_2port_sata, + ich8m_apple_sata_ahci, /* locks up on second port enable */ + tolapai_sata_ahci, + piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */ +}; + struct piix_map_db { const u32 mask; const u16 port_enable; @@ -157,6 +157,7 @@ struct piix_map_db { struct piix_host_priv { const int *map; + void __iomem *sidpr; }; static int piix_init_one(struct pci_dev *pdev, @@ -167,6 +168,9 @@ static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev); static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev); static int ich_pata_cable_detect(struct ata_port *ap); static u8 piix_vmw_bmdma_status(struct ata_port *ap); +static int piix_sidpr_scr_read(struct ata_port *ap, unsigned int reg, u32 *val); +static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val); +static void piix_sidpr_error_handler(struct ata_port *ap); #ifdef CONFIG_PM static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); static int piix_pci_device_resume(struct pci_dev *pdev); @@ -321,7 +325,6 @@ static const struct ata_port_operations piix_pata_ops = { .post_internal_cmd = ata_bmdma_post_internal_cmd, .cable_detect = ata_cable_40wire, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, @@ -353,7 +356,6 @@ static const struct ata_port_operations ich_pata_ops = { .post_internal_cmd = ata_bmdma_post_internal_cmd, .cable_detect = ich_pata_cable_detect, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, @@ -380,7 +382,6 @@ static const struct ata_port_operations piix_sata_ops = { .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, @@ -419,6 +420,35 @@ static const struct ata_port_operations piix_vmw_ops = { .port_start = ata_port_start, }; +static const struct ata_port_operations piix_sidpr_sata_ops = { + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_data_xfer, + + .scr_read = piix_sidpr_scr_read, + .scr_write = piix_sidpr_scr_write, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = piix_sidpr_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + + .port_start = ata_port_start, +}; + static const struct piix_map_db ich5_map_db = { .mask = 0x7, .port_enable = 0x3, @@ -526,7 +556,6 @@ static const struct piix_map_db *piix_map_db_table[] = { static struct ata_port_info piix_port_info[] = { [piix_pata_mwdma] = /* PIIX3 MWDMA only */ { - .sht = &piix_sht, .flags = PIIX_PATA_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ @@ -535,7 +564,6 @@ static struct ata_port_info piix_port_info[] = { [piix_pata_33] = /* PIIX4 at 33MHz */ { - .sht = &piix_sht, .flags = PIIX_PATA_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ @@ -545,7 +573,6 @@ static struct ata_port_info piix_port_info[] = { [ich_pata_33] = /* ICH0 - ICH at 33Mhz*/ { - .sht = &piix_sht, .flags = PIIX_PATA_FLAGS, .pio_mask = 0x1f, /* pio 0-4 */ .mwdma_mask = 0x06, /* Check: maybe 0x07 */ @@ -555,7 +582,6 @@ static struct ata_port_info piix_port_info[] = { [ich_pata_66] = /* ICH controllers up to 66MHz */ { - .sht = &piix_sht, .flags = PIIX_PATA_FLAGS, .pio_mask = 0x1f, /* pio 0-4 */ .mwdma_mask = 0x06, /* MWDMA0 is broken on chip */ @@ -565,7 +591,6 @@ static struct ata_port_info piix_port_info[] = { [ich_pata_100] = { - .sht = &piix_sht, .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x06, /* mwdma1-2 */ @@ -575,7 +600,6 @@ static struct ata_port_info piix_port_info[] = { [ich5_sata] = { - .sht = &piix_sht, .flags = PIIX_SATA_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -585,8 +609,7 @@ static struct ata_port_info piix_port_info[] = { [ich6_sata] = { - .sht = &piix_sht, - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR, + .flags = PIIX_SATA_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, @@ -595,9 +618,7 @@ static struct ata_port_info piix_port_info[] = { [ich6_sata_ahci] = { - .sht = &piix_sht, - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | - PIIX_FLAG_AHCI, + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, @@ -606,9 +627,7 @@ static struct ata_port_info piix_port_info[] = { [ich6m_sata_ahci] = { - .sht = &piix_sht, - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | - PIIX_FLAG_AHCI, + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, @@ -617,9 +636,8 @@ static struct ata_port_info piix_port_info[] = { [ich8_sata_ahci] = { - .sht = &piix_sht, - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | - PIIX_FLAG_AHCI, + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI | + PIIX_FLAG_SIDPR, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, @@ -628,9 +646,8 @@ static struct ata_port_info piix_port_info[] = { [ich8_2port_sata] = { - .sht = &piix_sht, - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | - PIIX_FLAG_AHCI, + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI | + PIIX_FLAG_SIDPR, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, @@ -639,9 +656,7 @@ static struct ata_port_info piix_port_info[] = { [tolapai_sata_ahci] = { - .sht = &piix_sht, - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | - PIIX_FLAG_AHCI, + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, @@ -650,9 +665,8 @@ static struct ata_port_info piix_port_info[] = { [ich8m_apple_sata_ahci] = { - .sht = &piix_sht, - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | - PIIX_FLAG_AHCI, + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI | + PIIX_FLAG_SIDPR, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, @@ -1001,6 +1015,180 @@ static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev) do_pata_set_dmamode(ap, adev, 1); } +/* + * Serial ATA Index/Data Pair Superset Registers access + * + * Beginning from ICH8, there's a sane way to access SCRs using index + * and data register pair located at BAR5. This creates an + * interesting problem of mapping two SCRs to one port. + * + * Although they have separate SCRs, the master and slave aren't + * independent enough to be treated as separate links - e.g. softreset + * resets both. Also, there's no protocol defined for hard resetting + * singled device sharing the virtual port (no defined way to acquire + * device signature). This is worked around by merging the SCR values + * into one sensible value and requesting follow-up SRST after + * hardreset. + * + * SCR merging is perfomed in nibbles which is the unit contents in + * SCRs are organized. If two values are equal, the value is used. + * When they differ, merge table which lists precedence of possible + * values is consulted and the first match or the last entry when + * nothing matches is used. When there's no merge table for the + * specific nibble, value from the first port is used. + */ +static const int piix_sidx_map[] = { + [SCR_STATUS] = 0, + [SCR_ERROR] = 2, + [SCR_CONTROL] = 1, +}; + +static void piix_sidpr_sel(struct ata_device *dev, unsigned int reg) +{ + struct ata_port *ap = dev->link->ap; + struct piix_host_priv *hpriv = ap->host->private_data; + + iowrite32(((ap->port_no * 2 + dev->devno) << 8) | piix_sidx_map[reg], + hpriv->sidpr + PIIX_SIDPR_IDX); +} + +static int piix_sidpr_read(struct ata_device *dev, unsigned int reg) +{ + struct piix_host_priv *hpriv = dev->link->ap->host->private_data; + + piix_sidpr_sel(dev, reg); + return ioread32(hpriv->sidpr + PIIX_SIDPR_DATA); +} + +static void piix_sidpr_write(struct ata_device *dev, unsigned int reg, u32 val) +{ + struct piix_host_priv *hpriv = dev->link->ap->host->private_data; + + piix_sidpr_sel(dev, reg); + iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA); +} + +u32 piix_merge_scr(u32 val0, u32 val1, const int * const *merge_tbl) +{ + u32 val = 0; + int i, mi; + + for (i = 0, mi = 0; i < 32 / 4; i++) { + u8 c0 = (val0 >> (i * 4)) & 0xf; + u8 c1 = (val1 >> (i * 4)) & 0xf; + u8 merged = c0; + const int *cur; + + /* if no merge preference, assume the first value */ + cur = merge_tbl[mi]; + if (!cur) + goto done; + mi++; + + /* if two values equal, use it */ + if (c0 == c1) + goto done; + + /* choose the first match or the last from the merge table */ + while (*cur != -1) { + if (c0 == *cur || c1 == *cur) + break; + cur++; + } + if (*cur == -1) + cur--; + merged = *cur; + done: + val |= merged << (i * 4); + } + + return val; +} + +static int piix_sidpr_scr_read(struct ata_port *ap, unsigned int reg, u32 *val) +{ + const int * const sstatus_merge_tbl[] = { + /* DET */ (const int []){ 1, 3, 0, 4, 3, -1 }, + /* SPD */ (const int []){ 2, 1, 0, -1 }, + /* IPM */ (const int []){ 6, 2, 1, 0, -1 }, + NULL, + }; + const int * const scontrol_merge_tbl[] = { + /* DET */ (const int []){ 1, 0, 4, 0, -1 }, + /* SPD */ (const int []){ 0, 2, 1, 0, -1 }, + /* IPM */ (const int []){ 0, 1, 2, 3, 0, -1 }, + NULL, + }; + u32 v0, v1; + + if (reg >= ARRAY_SIZE(piix_sidx_map)) + return -EINVAL; + + if (!(ap->flags & ATA_FLAG_SLAVE_POSS)) { + *val = piix_sidpr_read(&ap->link.device[0], reg); + return 0; + } + + v0 = piix_sidpr_read(&ap->link.device[0], reg); + v1 = piix_sidpr_read(&ap->link.device[1], reg); + + switch (reg) { + case SCR_STATUS: + *val = piix_merge_scr(v0, v1, sstatus_merge_tbl); + break; + case SCR_ERROR: + *val = v0 | v1; + break; + case SCR_CONTROL: + *val = piix_merge_scr(v0, v1, scontrol_merge_tbl); + break; + } + + return 0; +} + +static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val) +{ + if (reg >= ARRAY_SIZE(piix_sidx_map)) + return -EINVAL; + + piix_sidpr_write(&ap->link.device[0], reg, val); + + if (ap->flags & ATA_FLAG_SLAVE_POSS) + piix_sidpr_write(&ap->link.device[1], reg, val); + + return 0; +} + +static int piix_sidpr_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + int rc; + + /* do hardreset */ + rc = sata_link_hardreset(link, timing, deadline); + if (rc) { + ata_link_printk(link, KERN_ERR, + "COMRESET failed (errno=%d)\n", rc); + return rc; + } + + /* TODO: phy layer with polling, timeouts, etc. */ + if (ata_link_offline(link)) { + *class = ATA_DEV_NONE; + return 0; + } + + return -EAGAIN; +} + +static void piix_sidpr_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, + piix_sidpr_hardreset, ata_std_postreset); +} + #ifdef CONFIG_PM static int piix_broken_suspend(void) { @@ -1034,6 +1222,13 @@ static int piix_broken_suspend(void) }, }, { + .ident = "TECRA M6", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M6"), + }, + }, + { .ident = "TECRA M7", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), @@ -1048,6 +1243,13 @@ static int piix_broken_suspend(void) }, }, { + .ident = "Satellite R20", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Satellite R20"), + }, + }, + { .ident = "Satellite R25", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), @@ -1253,10 +1455,10 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) return no_piix_dma; } -static void __devinit piix_init_pcs(struct pci_dev *pdev, - struct ata_port_info *pinfo, +static void __devinit piix_init_pcs(struct ata_host *host, const struct piix_map_db *map_db) { + struct pci_dev *pdev = to_pci_dev(host->dev); u16 pcs, new_pcs; pci_read_config_word(pdev, ICH5_PCS, &pcs); @@ -1270,11 +1472,10 @@ static void __devinit piix_init_pcs(struct pci_dev *pdev, } } -static void __devinit piix_init_sata_map(struct pci_dev *pdev, - struct ata_port_info *pinfo, - const struct piix_map_db *map_db) +static const int *__devinit piix_init_sata_map(struct pci_dev *pdev, + struct ata_port_info *pinfo, + const struct piix_map_db *map_db) { - struct piix_host_priv *hpriv = pinfo[0].private_data; const int *map; int i, invalid_map = 0; u8 map_value; @@ -1298,7 +1499,6 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev, case IDE: WARN_ON((i & 1) || map[i + 1] != IDE); pinfo[i / 2] = piix_port_info[ich_pata_100]; - pinfo[i / 2].private_data = hpriv; i++; printk(" IDE IDE"); break; @@ -1316,7 +1516,33 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev, dev_printk(KERN_ERR, &pdev->dev, "invalid MAP value %u\n", map_value); - hpriv->map = map; + return map; +} + +static void __devinit piix_init_sidpr(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + struct piix_host_priv *hpriv = host->private_data; + int i; + + /* check for availability */ + for (i = 0; i < 4; i++) + if (hpriv->map[i] == IDE) + return; + + if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR)) + return; + + if (pci_resource_start(pdev, PIIX_SIDPR_BAR) == 0 || + pci_resource_len(pdev, PIIX_SIDPR_BAR) != PIIX_SIDPR_LEN) + return; + + if (pcim_iomap_regions(pdev, 1 << PIIX_SIDPR_BAR, DRV_NAME)) + return; + + hpriv->sidpr = pcim_iomap_table(pdev)[PIIX_SIDPR_BAR]; + host->ports[0]->ops = &piix_sidpr_sata_ops; + host->ports[1]->ops = &piix_sidpr_sata_ops; } static void piix_iocfg_bit18_quirk(struct pci_dev *pdev) @@ -1375,8 +1601,10 @@ static int piix_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct device *dev = &pdev->dev; struct ata_port_info port_info[2]; const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] }; - struct piix_host_priv *hpriv; unsigned long port_flags; + struct ata_host *host; + struct piix_host_priv *hpriv; + int rc; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, @@ -1386,17 +1614,31 @@ static int piix_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (!in_module_init) return -ENODEV; + port_info[0] = piix_port_info[ent->driver_data]; + port_info[1] = piix_port_info[ent->driver_data]; + + port_flags = port_info[0].flags; + + /* enable device and prepare host */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + /* SATA map init can change port_info, do it before prepping host */ hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); if (!hpriv) return -ENOMEM; - port_info[0] = piix_port_info[ent->driver_data]; - port_info[1] = piix_port_info[ent->driver_data]; - port_info[0].private_data = hpriv; - port_info[1].private_data = hpriv; + if (port_flags & ATA_FLAG_SATA) + hpriv->map = piix_init_sata_map(pdev, port_info, + piix_map_db_table[ent->driver_data]); - port_flags = port_info[0].flags; + rc = ata_pci_prepare_sff_host(pdev, ppi, &host); + if (rc) + return rc; + host->private_data = hpriv; + /* initialize controller */ if (port_flags & PIIX_FLAG_AHCI) { u8 tmp; pci_read_config_byte(pdev, PIIX_SCC, &tmp); @@ -1407,12 +1649,9 @@ static int piix_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } } - /* Initialize SATA map */ if (port_flags & ATA_FLAG_SATA) { - piix_init_sata_map(pdev, port_info, - piix_map_db_table[ent->driver_data]); - piix_init_pcs(pdev, port_info, - piix_map_db_table[ent->driver_data]); + piix_init_pcs(host, piix_map_db_table[ent->driver_data]); + piix_init_sidpr(host); } /* apply IOCFG bit18 quirk */ @@ -1431,12 +1670,14 @@ static int piix_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* This writes into the master table but it does not really matter for this errata as we will apply it to all the PIIX devices on the board */ - port_info[0].mwdma_mask = 0; - port_info[0].udma_mask = 0; - port_info[1].mwdma_mask = 0; - port_info[1].udma_mask = 0; + host->ports[0]->mwdma_mask = 0; + host->ports[0]->udma_mask = 0; + host->ports[1]->mwdma_mask = 0; + host->ports[1]->udma_mask = 0; } - return ata_pci_init_one(pdev, ppi); + + pci_set_master(pdev); + return ata_pci_activate_sff_host(host, ata_interrupt, &piix_sht); } static int __init piix_init(void) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 7bf4befd96bc..9e8ec19260af 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -442,40 +442,77 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf) } /** + * ata_acpi_gtm_xfermode - determine xfermode from GTM parameter + * @dev: target device + * @gtm: GTM parameter to use + * + * Determine xfermask for @dev from @gtm. + * + * LOCKING: + * None. + * + * RETURNS: + * Determined xfermask. + */ +unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev, + const struct ata_acpi_gtm *gtm) +{ + unsigned long xfer_mask = 0; + unsigned int type; + int unit; + u8 mode; + + /* we always use the 0 slot for crap hardware */ + unit = dev->devno; + if (!(gtm->flags & 0x10)) + unit = 0; + + /* PIO */ + mode = ata_timing_cycle2mode(ATA_SHIFT_PIO, gtm->drive[unit].pio); + xfer_mask |= ata_xfer_mode2mask(mode); + + /* See if we have MWDMA or UDMA data. We don't bother with + * MWDMA if UDMA is available as this means the BIOS set UDMA + * and our error changedown if it works is UDMA to PIO anyway. + */ + if (!(gtm->flags & (1 << (2 * unit)))) + type = ATA_SHIFT_MWDMA; + else + type = ATA_SHIFT_UDMA; + + mode = ata_timing_cycle2mode(type, gtm->drive[unit].dma); + xfer_mask |= ata_xfer_mode2mask(mode); + + return xfer_mask; +} +EXPORT_SYMBOL_GPL(ata_acpi_gtm_xfermask); + +/** * ata_acpi_cbl_80wire - Check for 80 wire cable * @ap: Port to check + * @gtm: GTM data to use * - * Return 1 if the ACPI mode data for this port indicates the BIOS selected - * an 80wire mode. + * Return 1 if the @gtm indicates the BIOS selected an 80wire mode. */ - -int ata_acpi_cbl_80wire(struct ata_port *ap) +int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm) { - const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap); - int valid = 0; + struct ata_device *dev; - if (!gtm) - return 0; + ata_link_for_each_dev(dev, &ap->link) { + unsigned long xfer_mask, udma_mask; + + if (!ata_dev_enabled(dev)) + continue; + + xfer_mask = ata_acpi_gtm_xfermask(dev, gtm); + ata_unpack_xfermask(xfer_mask, NULL, NULL, &udma_mask); + + if (udma_mask & ~ATA_UDMA_MASK_40C) + return 1; + } - /* Split timing, DMA enabled */ - if ((gtm->flags & 0x11) == 0x11 && gtm->drive[0].dma < 55) - valid |= 1; - if ((gtm->flags & 0x14) == 0x14 && gtm->drive[1].dma < 55) - valid |= 2; - /* Shared timing, DMA enabled */ - if ((gtm->flags & 0x11) == 0x01 && gtm->drive[0].dma < 55) - valid |= 1; - if ((gtm->flags & 0x14) == 0x04 && gtm->drive[0].dma < 55) - valid |= 2; - - /* Drive check */ - if ((valid & 1) && ata_dev_enabled(&ap->link.device[0])) - return 1; - if ((valid & 2) && ata_dev_enabled(&ap->link.device[1])) - return 1; return 0; } - EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire); static void ata_acpi_gtf_to_tf(struct ata_device *dev, @@ -776,6 +813,36 @@ void ata_acpi_on_resume(struct ata_port *ap) } /** + * ata_acpi_set_state - set the port power state + * @ap: target ATA port + * @state: state, on/off + * + * This function executes the _PS0/_PS3 ACPI method to set the power state. + * ACPI spec requires _PS0 when IDE power on and _PS3 when power off + */ +void ata_acpi_set_state(struct ata_port *ap, pm_message_t state) +{ + struct ata_device *dev; + + if (!ap->acpi_handle || (ap->flags & ATA_FLAG_ACPI_SATA)) + return; + + /* channel first and then drives for power on and vica versa + for power off */ + if (state.event == PM_EVENT_ON) + acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D0); + + ata_link_for_each_dev(dev, &ap->link) { + if (dev->acpi_handle && ata_dev_enabled(dev)) + acpi_bus_set_power(dev->acpi_handle, + state.event == PM_EVENT_ON ? + ACPI_STATE_D0 : ACPI_STATE_D3); + } + if (state.event != PM_EVENT_ON) + acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D3); +} + +/** * ata_acpi_on_devcfg - ATA ACPI hook called on device donfiguration * @dev: target ATA device * diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 6380726f7538..ce803d18e96a 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -119,6 +119,10 @@ int libata_noacpi = 0; module_param_named(noacpi, libata_noacpi, int, 0444); MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in probe/suspend/resume when set"); +int libata_allow_tpm = 0; +module_param_named(allow_tpm, libata_allow_tpm, int, 0444); +MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands"); + MODULE_AUTHOR("Jeff Garzik"); MODULE_DESCRIPTION("Library module for ATA devices"); MODULE_LICENSE("GPL"); @@ -450,9 +454,9 @@ int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, * RETURNS: * Packed xfer_mask. */ -static unsigned int ata_pack_xfermask(unsigned int pio_mask, - unsigned int mwdma_mask, - unsigned int udma_mask) +unsigned long ata_pack_xfermask(unsigned long pio_mask, + unsigned long mwdma_mask, + unsigned long udma_mask) { return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) | ((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) | @@ -469,10 +473,8 @@ static unsigned int ata_pack_xfermask(unsigned int pio_mask, * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask. * Any NULL distination masks will be ignored. */ -static void ata_unpack_xfermask(unsigned int xfer_mask, - unsigned int *pio_mask, - unsigned int *mwdma_mask, - unsigned int *udma_mask) +void ata_unpack_xfermask(unsigned long xfer_mask, unsigned long *pio_mask, + unsigned long *mwdma_mask, unsigned long *udma_mask) { if (pio_mask) *pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO; @@ -486,9 +488,9 @@ static const struct ata_xfer_ent { int shift, bits; u8 base; } ata_xfer_tbl[] = { - { ATA_SHIFT_PIO, ATA_BITS_PIO, XFER_PIO_0 }, - { ATA_SHIFT_MWDMA, ATA_BITS_MWDMA, XFER_MW_DMA_0 }, - { ATA_SHIFT_UDMA, ATA_BITS_UDMA, XFER_UDMA_0 }, + { ATA_SHIFT_PIO, ATA_NR_PIO_MODES, XFER_PIO_0 }, + { ATA_SHIFT_MWDMA, ATA_NR_MWDMA_MODES, XFER_MW_DMA_0 }, + { ATA_SHIFT_UDMA, ATA_NR_UDMA_MODES, XFER_UDMA_0 }, { -1, }, }; @@ -503,9 +505,9 @@ static const struct ata_xfer_ent { * None. * * RETURNS: - * Matching XFER_* value, 0 if no match found. + * Matching XFER_* value, 0xff if no match found. */ -static u8 ata_xfer_mask2mode(unsigned int xfer_mask) +u8 ata_xfer_mask2mode(unsigned long xfer_mask) { int highbit = fls(xfer_mask) - 1; const struct ata_xfer_ent *ent; @@ -513,7 +515,7 @@ static u8 ata_xfer_mask2mode(unsigned int xfer_mask) for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) if (highbit >= ent->shift && highbit < ent->shift + ent->bits) return ent->base + highbit - ent->shift; - return 0; + return 0xff; } /** @@ -528,13 +530,14 @@ static u8 ata_xfer_mask2mode(unsigned int xfer_mask) * RETURNS: * Matching xfer_mask, 0 if no match found. */ -static unsigned int ata_xfer_mode2mask(u8 xfer_mode) +unsigned long ata_xfer_mode2mask(u8 xfer_mode) { const struct ata_xfer_ent *ent; for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) - return 1 << (ent->shift + xfer_mode - ent->base); + return ((2 << (ent->shift + xfer_mode - ent->base)) - 1) + & ~((1 << ent->shift) - 1); return 0; } @@ -550,7 +553,7 @@ static unsigned int ata_xfer_mode2mask(u8 xfer_mode) * RETURNS: * Matching xfer_shift, -1 if no match found. */ -static int ata_xfer_mode2shift(unsigned int xfer_mode) +int ata_xfer_mode2shift(unsigned long xfer_mode) { const struct ata_xfer_ent *ent; @@ -574,7 +577,7 @@ static int ata_xfer_mode2shift(unsigned int xfer_mode) * Constant C string representing highest speed listed in * @mode_mask, or the constant C string "<n/a>". */ -static const char *ata_mode_string(unsigned int xfer_mask) +const char *ata_mode_string(unsigned long xfer_mask) { static const char * const xfer_mode_str[] = { "PIO0", @@ -947,8 +950,8 @@ unsigned int ata_dev_try_classify(struct ata_device *dev, int present, if (r_err) *r_err = err; - /* see if device passed diags: if master then continue and warn later */ - if (err == 0 && dev->devno == 0) + /* see if device passed diags: continue and warn later */ + if (err == 0) /* diagnostic fail : do nothing _YET_ */ dev->horkage |= ATA_HORKAGE_DIAGNOSTIC; else if (err == 1) @@ -1286,48 +1289,6 @@ static int ata_hpa_resize(struct ata_device *dev) } /** - * ata_id_to_dma_mode - Identify DMA mode from id block - * @dev: device to identify - * @unknown: mode to assume if we cannot tell - * - * Set up the timing values for the device based upon the identify - * reported values for the DMA mode. This function is used by drivers - * which rely upon firmware configured modes, but wish to report the - * mode correctly when possible. - * - * In addition we emit similarly formatted messages to the default - * ata_dev_set_mode handler, in order to provide consistency of - * presentation. - */ - -void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown) -{ - unsigned int mask; - u8 mode; - - /* Pack the DMA modes */ - mask = ((dev->id[63] >> 8) << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA; - if (dev->id[53] & 0x04) - mask |= ((dev->id[88] >> 8) << ATA_SHIFT_UDMA) & ATA_MASK_UDMA; - - /* Select the mode in use */ - mode = ata_xfer_mask2mode(mask); - - if (mode != 0) { - ata_dev_printk(dev, KERN_INFO, "configured for %s\n", - ata_mode_string(mask)); - } else { - /* SWDMA perhaps ? */ - mode = unknown; - ata_dev_printk(dev, KERN_INFO, "configured for DMA\n"); - } - - /* Configure the device reporting */ - dev->xfer_mode = mode; - dev->xfer_shift = ata_xfer_mode2shift(mode); -} - -/** * ata_noop_dev_select - Select device 0/1 on ATA bus * @ap: ATA channel to manipulate * @device: ATA device (numbered from zero) to select @@ -1464,9 +1425,9 @@ static inline void ata_dump_id(const u16 *id) * RETURNS: * Computed xfermask */ -static unsigned int ata_id_xfermask(const u16 *id) +unsigned long ata_id_xfermask(const u16 *id) { - unsigned int pio_mask, mwdma_mask, udma_mask; + unsigned long pio_mask, mwdma_mask, udma_mask; /* Usual case. Word 53 indicates word 64 is valid */ if (id[ATA_ID_FIELD_VALID] & (1 << 1)) { @@ -1519,7 +1480,7 @@ static unsigned int ata_id_xfermask(const u16 *id) } /** - * ata_port_queue_task - Queue port_task + * ata_pio_queue_task - Queue port_task * @ap: The ata_port to queue port_task for * @fn: workqueue function to be scheduled * @data: data for @fn to use @@ -1531,16 +1492,15 @@ static unsigned int ata_id_xfermask(const u16 *id) * one task is active at any given time. * * libata core layer takes care of synchronization between - * port_task and EH. ata_port_queue_task() may be ignored for EH + * port_task and EH. ata_pio_queue_task() may be ignored for EH * synchronization. * * LOCKING: * Inherited from caller. */ -void ata_port_queue_task(struct ata_port *ap, work_func_t fn, void *data, - unsigned long delay) +static void ata_pio_queue_task(struct ata_port *ap, void *data, + unsigned long delay) { - PREPARE_DELAYED_WORK(&ap->port_task, fn); ap->port_task_data = data; /* may fail if ata_port_flush_task() in progress */ @@ -2090,7 +2050,7 @@ int ata_dev_configure(struct ata_device *dev) struct ata_eh_context *ehc = &dev->link->eh_context; int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; const u16 *id = dev->id; - unsigned int xfer_mask; + unsigned long xfer_mask; char revbuf[7]; /* XYZ-99\0 */ char fwrevbuf[ATA_ID_FW_REV_LEN+1]; char modelbuf[ATA_ID_PROD_LEN+1]; @@ -2161,8 +2121,14 @@ int ata_dev_configure(struct ata_device *dev) "supports DRM functions and may " "not be fully accessable.\n"); snprintf(revbuf, 7, "CFA"); - } else + } else { snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id)); + /* Warn the user if the device has TPM extensions */ + if (ata_id_has_tpm(id)) + ata_dev_printk(dev, KERN_WARNING, + "supports DRM functions and may " + "not be fully accessable.\n"); + } dev->n_sectors = ata_id_n_sectors(id); @@ -2295,19 +2261,8 @@ int ata_dev_configure(struct ata_device *dev) dev->flags |= ATA_DFLAG_DIPM; } - if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) { - /* Let the user know. We don't want to disallow opens for - rescue purposes, or in case the vendor is just a blithering - idiot */ - if (print_info) { - ata_dev_printk(dev, KERN_WARNING, -"Drive reports diagnostics failure. This may indicate a drive\n"); - ata_dev_printk(dev, KERN_WARNING, -"fault or invalid emulation. Contact drive vendor for information.\n"); - } - } - - /* limit bridge transfers to udma5, 200 sectors */ + /* Limit PATA drive on SATA cable bridge transfers to udma5, + 200 sectors */ if (ata_dev_knobble(dev)) { if (ata_msg_drv(ap) && print_info) ata_dev_printk(dev, KERN_INFO, @@ -2336,6 +2291,21 @@ int ata_dev_configure(struct ata_device *dev) if (ap->ops->dev_config) ap->ops->dev_config(dev); + if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) { + /* Let the user know. We don't want to disallow opens for + rescue purposes, or in case the vendor is just a blithering + idiot. Do this after the dev_config call as some controllers + with buggy firmware may want to avoid reporting false device + bugs */ + + if (print_info) { + ata_dev_printk(dev, KERN_WARNING, +"Drive reports diagnostics failure. This may indicate a drive\n"); + ata_dev_printk(dev, KERN_WARNING, +"fault or invalid emulation. Contact drive vendor for information.\n"); + } + } + if (ata_msg_probe(ap)) ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n", __FUNCTION__, ata_chk_status(ap)); @@ -2387,6 +2357,18 @@ int ata_cable_unknown(struct ata_port *ap) } /** + * ata_cable_ignore - return ignored PATA cable. + * @ap: port + * + * Helper method for drivers which don't use cable type to limit + * transfer mode. + */ +int ata_cable_ignore(struct ata_port *ap) +{ + return ATA_CBL_PATA_IGN; +} + +/** * ata_cable_sata - return SATA cable type * @ap: port * @@ -2781,38 +2763,33 @@ int sata_set_spd(struct ata_link *link) */ static const struct ata_timing ata_timing[] = { +/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */ + { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, + { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, + { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, + { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, + { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, + { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 }, + { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 }, - { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, - { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, - { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, - { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, + { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, + { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, - { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 }, + { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, + { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, + { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 100, 0 }, - { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, - { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, - { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, + { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 }, /* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */ - - { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, - { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, - { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, - - { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, - { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, - { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, - - { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 }, - { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 }, - { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, - { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, - - { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, - { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, - { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, - -/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */ + { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, + { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, + { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, + { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, + { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, + { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, + { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, { 0xFF } }; @@ -2845,14 +2822,16 @@ void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b, if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma); } -static const struct ata_timing *ata_timing_find_mode(unsigned short speed) +const struct ata_timing *ata_timing_find_mode(u8 xfer_mode) { - const struct ata_timing *t; + const struct ata_timing *t = ata_timing; + + while (xfer_mode > t->mode) + t++; - for (t = ata_timing; t->mode != speed; t++) - if (t->mode == 0xFF) - return NULL; - return t; + if (xfer_mode == t->mode) + return t; + return NULL; } int ata_timing_compute(struct ata_device *adev, unsigned short speed, @@ -2927,6 +2906,57 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, } /** + * ata_timing_cycle2mode - find xfer mode for the specified cycle duration + * @xfer_shift: ATA_SHIFT_* value for transfer type to examine. + * @cycle: cycle duration in ns + * + * Return matching xfer mode for @cycle. The returned mode is of + * the transfer type specified by @xfer_shift. If @cycle is too + * slow for @xfer_shift, 0xff is returned. If @cycle is faster + * than the fastest known mode, the fasted mode is returned. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching xfer_mode, 0xff if no match found. + */ +u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle) +{ + u8 base_mode = 0xff, last_mode = 0xff; + const struct ata_xfer_ent *ent; + const struct ata_timing *t; + + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (ent->shift == xfer_shift) + base_mode = ent->base; + + for (t = ata_timing_find_mode(base_mode); + t && ata_xfer_mode2shift(t->mode) == xfer_shift; t++) { + unsigned short this_cycle; + + switch (xfer_shift) { + case ATA_SHIFT_PIO: + case ATA_SHIFT_MWDMA: + this_cycle = t->cycle; + break; + case ATA_SHIFT_UDMA: + this_cycle = t->udma; + break; + default: + return 0xff; + } + + if (cycle > this_cycle) + break; + + last_mode = t->mode; + } + + return last_mode; +} + +/** * ata_down_xfermask_limit - adjust dev xfer masks downward * @dev: Device to adjust xfer masks * @sel: ATA_DNXFER_* selector @@ -2944,8 +2974,8 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel) { char buf[32]; - unsigned int orig_mask, xfer_mask; - unsigned int pio_mask, mwdma_mask, udma_mask; + unsigned long orig_mask, xfer_mask; + unsigned long pio_mask, mwdma_mask, udma_mask; int quiet, highbit; quiet = !!(sel & ATA_DNXFER_QUIET); @@ -3039,7 +3069,7 @@ static int ata_dev_set_mode(struct ata_device *dev) /* Early MWDMA devices do DMA but don't allow DMA mode setting. Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */ - if (dev->xfer_shift == ATA_SHIFT_MWDMA && + if (dev->xfer_shift == ATA_SHIFT_MWDMA && dev->dma_mode == XFER_MW_DMA_0 && (dev->id[63] >> 8) & 1) err_mask &= ~AC_ERR_DEV; @@ -3089,7 +3119,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) /* step 1: calculate xfer_mask */ ata_link_for_each_dev(dev, link) { - unsigned int pio_mask, dma_mask; + unsigned long pio_mask, dma_mask; unsigned int mode_mask; if (!ata_dev_enabled(dev)) @@ -3115,7 +3145,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) dev->dma_mode = ata_xfer_mask2mode(dma_mask); found = 1; - if (dev->dma_mode) + if (dev->dma_mode != 0xff) used_dma = 1; } if (!found) @@ -3126,7 +3156,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) if (!ata_dev_enabled(dev)) continue; - if (!dev->pio_mode) { + if (dev->pio_mode == 0xff) { ata_dev_printk(dev, KERN_WARNING, "no PIO support\n"); rc = -EINVAL; goto out; @@ -3140,7 +3170,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) /* step 3: set host DMA timings */ ata_link_for_each_dev(dev, link) { - if (!ata_dev_enabled(dev) || !dev->dma_mode) + if (!ata_dev_enabled(dev) || dev->dma_mode == 0xff) continue; dev->xfer_mode = dev->dma_mode; @@ -3173,31 +3203,6 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) } /** - * ata_set_mode - Program timings and issue SET FEATURES - XFER - * @link: link on which timings will be programmed - * @r_failed_dev: out paramter for failed device - * - * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If - * ata_set_mode() fails, pointer to the failing device is - * returned in @r_failed_dev. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * 0 on success, negative errno otherwise - */ -int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) -{ - struct ata_port *ap = link->ap; - - /* has private set_mode? */ - if (ap->ops->set_mode) - return ap->ops->set_mode(link, r_failed_dev); - return ata_do_set_mode(link, r_failed_dev); -} - -/** * ata_tf_to_host - issue ATA taskfile to host controller * @ap: port to which command is being issued * @tf: ATA taskfile register set @@ -4363,7 +4368,14 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev) tf.feature = SETFEATURES_XFER; tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_POLLING; tf.protocol = ATA_PROT_NODATA; - tf.nsect = dev->xfer_mode; + /* If we are using IORDY we must send the mode setting command */ + if (ata_pio_need_iordy(dev)) + tf.nsect = dev->xfer_mode; + /* If the device has IORDY and the controller does not - turn it off */ + else if (ata_id_has_iordy(dev->id)) + tf.nsect = 0x01; + else /* In the ancient relic department - skip all of this */ + return 0; err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); @@ -4462,17 +4474,13 @@ static unsigned int ata_dev_init_params(struct ata_device *dev, void ata_sg_clean(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - struct scatterlist *sg = qc->__sg; + struct scatterlist *sg = qc->sg; int dir = qc->dma_dir; void *pad_buf = NULL; - WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); WARN_ON(sg == NULL); - if (qc->flags & ATA_QCFLAG_SINGLE) - WARN_ON(qc->n_elem > 1); - - VPRINTK("unmapping %u sg elements\n", qc->n_elem); + VPRINTK("unmapping %u sg elements\n", qc->mapped_n_elem); /* if we padded the buffer out to 32-bit bound, and data * xfer direction is from-device, we must copy from the @@ -4481,31 +4489,20 @@ void ata_sg_clean(struct ata_queued_cmd *qc) if (qc->pad_len && !(qc->tf.flags & ATA_TFLAG_WRITE)) pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); - if (qc->flags & ATA_QCFLAG_SG) { - if (qc->n_elem) - dma_unmap_sg(ap->dev, sg, qc->n_elem, dir); - /* restore last sg */ - sg_last(sg, qc->orig_n_elem)->length += qc->pad_len; - if (pad_buf) { - struct scatterlist *psg = &qc->pad_sgent; - void *addr = kmap_atomic(sg_page(psg), KM_IRQ0); - memcpy(addr + psg->offset, pad_buf, qc->pad_len); - kunmap_atomic(addr, KM_IRQ0); - } - } else { - if (qc->n_elem) - dma_unmap_single(ap->dev, - sg_dma_address(&sg[0]), sg_dma_len(&sg[0]), - dir); - /* restore sg */ - sg->length += qc->pad_len; - if (pad_buf) - memcpy(qc->buf_virt + sg->length - qc->pad_len, - pad_buf, qc->pad_len); + if (qc->mapped_n_elem) + dma_unmap_sg(ap->dev, sg, qc->mapped_n_elem, dir); + /* restore last sg */ + if (qc->last_sg) + *qc->last_sg = qc->saved_last_sg; + if (pad_buf) { + struct scatterlist *psg = &qc->extra_sg[1]; + void *addr = kmap_atomic(sg_page(psg), KM_IRQ0); + memcpy(addr + psg->offset, pad_buf, qc->pad_len); + kunmap_atomic(addr, KM_IRQ0); } qc->flags &= ~ATA_QCFLAG_DMAMAP; - qc->__sg = NULL; + qc->sg = NULL; } /** @@ -4523,13 +4520,10 @@ static void ata_fill_sg(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct scatterlist *sg; - unsigned int idx; + unsigned int si, pi; - WARN_ON(qc->__sg == NULL); - WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); - - idx = 0; - ata_for_each_sg(sg, qc) { + pi = 0; + for_each_sg(qc->sg, sg, qc->n_elem, si) { u32 addr, offset; u32 sg_len, len; @@ -4546,18 +4540,17 @@ static void ata_fill_sg(struct ata_queued_cmd *qc) if ((offset + sg_len) > 0x10000) len = 0x10000 - offset; - ap->prd[idx].addr = cpu_to_le32(addr); - ap->prd[idx].flags_len = cpu_to_le32(len & 0xffff); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); + ap->prd[pi].addr = cpu_to_le32(addr); + ap->prd[pi].flags_len = cpu_to_le32(len & 0xffff); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len); - idx++; + pi++; sg_len -= len; addr += len; } } - if (idx) - ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); + ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); } /** @@ -4577,13 +4570,10 @@ static void ata_fill_sg_dumb(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct scatterlist *sg; - unsigned int idx; - - WARN_ON(qc->__sg == NULL); - WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); + unsigned int si, pi; - idx = 0; - ata_for_each_sg(sg, qc) { + pi = 0; + for_each_sg(qc->sg, sg, qc->n_elem, si) { u32 addr, offset; u32 sg_len, len, blen; @@ -4601,25 +4591,24 @@ static void ata_fill_sg_dumb(struct ata_queued_cmd *qc) len = 0x10000 - offset; blen = len & 0xffff; - ap->prd[idx].addr = cpu_to_le32(addr); + ap->prd[pi].addr = cpu_to_le32(addr); if (blen == 0) { /* Some PATA chipsets like the CS5530 can't cope with 0x0000 meaning 64K as the spec says */ - ap->prd[idx].flags_len = cpu_to_le32(0x8000); + ap->prd[pi].flags_len = cpu_to_le32(0x8000); blen = 0x8000; - ap->prd[++idx].addr = cpu_to_le32(addr + 0x8000); + ap->prd[++pi].addr = cpu_to_le32(addr + 0x8000); } - ap->prd[idx].flags_len = cpu_to_le32(blen); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); + ap->prd[pi].flags_len = cpu_to_le32(blen); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len); - idx++; + pi++; sg_len -= len; addr += len; } } - if (idx) - ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); + ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); } /** @@ -4669,8 +4658,8 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc) */ static int atapi_qc_may_overflow(struct ata_queued_cmd *qc) { - if (qc->tf.protocol != ATA_PROT_ATAPI && - qc->tf.protocol != ATA_PROT_ATAPI_DMA) + if (qc->tf.protocol != ATAPI_PROT_PIO && + qc->tf.protocol != ATAPI_PROT_DMA) return 0; if (qc->tf.flags & ATA_TFLAG_WRITE) @@ -4756,33 +4745,6 @@ void ata_dumb_qc_prep(struct ata_queued_cmd *qc) void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } /** - * ata_sg_init_one - Associate command with memory buffer - * @qc: Command to be associated - * @buf: Memory buffer - * @buflen: Length of memory buffer, in bytes. - * - * Initialize the data-related elements of queued_cmd @qc - * to point to a single memory buffer, @buf of byte length @buflen. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ - -void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) -{ - qc->flags |= ATA_QCFLAG_SINGLE; - - qc->__sg = &qc->sgent; - qc->n_elem = 1; - qc->orig_n_elem = 1; - qc->buf_virt = buf; - qc->nbytes = buflen; - qc->cursg = qc->__sg; - - sg_init_one(&qc->sgent, buf, buflen); -} - -/** * ata_sg_init - Associate command with scatter-gather table. * @qc: Command to be associated * @sg: Scatter-gather table. @@ -4795,84 +4757,103 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) * LOCKING: * spin_lock_irqsave(host lock) */ - void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem) { - qc->flags |= ATA_QCFLAG_SG; - qc->__sg = sg; + qc->sg = sg; qc->n_elem = n_elem; - qc->orig_n_elem = n_elem; - qc->cursg = qc->__sg; + qc->cursg = qc->sg; } -/** - * ata_sg_setup_one - DMA-map the memory buffer associated with a command. - * @qc: Command with memory buffer to be mapped. - * - * DMA-map the memory buffer associated with queued_cmd @qc. - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - * RETURNS: - * Zero on success, negative on error. - */ - -static int ata_sg_setup_one(struct ata_queued_cmd *qc) +static unsigned int ata_sg_setup_extra(struct ata_queued_cmd *qc, + unsigned int *n_elem_extra, + unsigned int *nbytes_extra) { struct ata_port *ap = qc->ap; - int dir = qc->dma_dir; - struct scatterlist *sg = qc->__sg; - dma_addr_t dma_address; - int trim_sg = 0; + unsigned int n_elem = qc->n_elem; + struct scatterlist *lsg, *copy_lsg = NULL, *tsg = NULL, *esg = NULL; + + *n_elem_extra = 0; + *nbytes_extra = 0; + + /* needs padding? */ + qc->pad_len = qc->nbytes & 3; + + if (likely(!qc->pad_len)) + return n_elem; + + /* locate last sg and save it */ + lsg = sg_last(qc->sg, n_elem); + qc->last_sg = lsg; + qc->saved_last_sg = *lsg; + + sg_init_table(qc->extra_sg, ARRAY_SIZE(qc->extra_sg)); - /* we must lengthen transfers to end on a 32-bit boundary */ - qc->pad_len = sg->length & 3; if (qc->pad_len) { + struct scatterlist *psg = &qc->extra_sg[1]; void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); - struct scatterlist *psg = &qc->pad_sgent; + unsigned int offset; WARN_ON(qc->dev->class != ATA_DEV_ATAPI); memset(pad_buf, 0, ATA_DMA_PAD_SZ); - if (qc->tf.flags & ATA_TFLAG_WRITE) - memcpy(pad_buf, qc->buf_virt + sg->length - qc->pad_len, - qc->pad_len); + /* psg->page/offset are used to copy to-be-written + * data in this function or read data in ata_sg_clean. + */ + offset = lsg->offset + lsg->length - qc->pad_len; + sg_set_page(psg, nth_page(sg_page(lsg), offset >> PAGE_SHIFT), + qc->pad_len, offset_in_page(offset)); + + if (qc->tf.flags & ATA_TFLAG_WRITE) { + void *addr = kmap_atomic(sg_page(psg), KM_IRQ0); + memcpy(pad_buf, addr + psg->offset, qc->pad_len); + kunmap_atomic(addr, KM_IRQ0); + } sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ); sg_dma_len(psg) = ATA_DMA_PAD_SZ; - /* trim sg */ - sg->length -= qc->pad_len; - if (sg->length == 0) - trim_sg = 1; - DPRINTK("padding done, sg->length=%u pad_len=%u\n", - sg->length, qc->pad_len); - } + /* Trim the last sg entry and chain the original and + * padding sg lists. + * + * Because chaining consumes one sg entry, one extra + * sg entry is allocated and the last sg entry is + * copied to it if the length isn't zero after padded + * amount is removed. + * + * If the last sg entry is completely replaced by + * padding sg entry, the first sg entry is skipped + * while chaining. + */ + lsg->length -= qc->pad_len; + if (lsg->length) { + copy_lsg = &qc->extra_sg[0]; + tsg = &qc->extra_sg[0]; + } else { + n_elem--; + tsg = &qc->extra_sg[1]; + } - if (trim_sg) { - qc->n_elem--; - goto skip_map; - } + esg = &qc->extra_sg[1]; - dma_address = dma_map_single(ap->dev, qc->buf_virt, - sg->length, dir); - if (dma_mapping_error(dma_address)) { - /* restore sg */ - sg->length += qc->pad_len; - return -1; + (*n_elem_extra)++; + (*nbytes_extra) += 4 - qc->pad_len; } - sg_dma_address(sg) = dma_address; - sg_dma_len(sg) = sg->length; + if (copy_lsg) + sg_set_page(copy_lsg, sg_page(lsg), lsg->length, lsg->offset); -skip_map: - DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg), - qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); + sg_chain(lsg, 1, tsg); + sg_mark_end(esg); - return 0; + /* sglist can't start with chaining sg entry, fast forward */ + if (qc->sg == lsg) { + qc->sg = tsg; + qc->cursg = tsg; + } + + return n_elem; } /** @@ -4888,75 +4869,30 @@ skip_map: * Zero on success, negative on error. * */ - static int ata_sg_setup(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - struct scatterlist *sg = qc->__sg; - struct scatterlist *lsg = sg_last(qc->__sg, qc->n_elem); - int n_elem, pre_n_elem, dir, trim_sg = 0; + unsigned int n_elem, n_elem_extra, nbytes_extra; VPRINTK("ENTER, ata%u\n", ap->print_id); - WARN_ON(!(qc->flags & ATA_QCFLAG_SG)); - /* we must lengthen transfers to end on a 32-bit boundary */ - qc->pad_len = lsg->length & 3; - if (qc->pad_len) { - void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); - struct scatterlist *psg = &qc->pad_sgent; - unsigned int offset; - - WARN_ON(qc->dev->class != ATA_DEV_ATAPI); + n_elem = ata_sg_setup_extra(qc, &n_elem_extra, &nbytes_extra); - memset(pad_buf, 0, ATA_DMA_PAD_SZ); - - /* - * psg->page/offset are used to copy to-be-written - * data in this function or read data in ata_sg_clean. - */ - offset = lsg->offset + lsg->length - qc->pad_len; - sg_init_table(psg, 1); - sg_set_page(psg, nth_page(sg_page(lsg), offset >> PAGE_SHIFT), - qc->pad_len, offset_in_page(offset)); - - if (qc->tf.flags & ATA_TFLAG_WRITE) { - void *addr = kmap_atomic(sg_page(psg), KM_IRQ0); - memcpy(pad_buf, addr + psg->offset, qc->pad_len); - kunmap_atomic(addr, KM_IRQ0); + if (n_elem) { + n_elem = dma_map_sg(ap->dev, qc->sg, n_elem, qc->dma_dir); + if (n_elem < 1) { + /* restore last sg */ + if (qc->last_sg) + *qc->last_sg = qc->saved_last_sg; + return -1; } - - sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ); - sg_dma_len(psg) = ATA_DMA_PAD_SZ; - /* trim last sg */ - lsg->length -= qc->pad_len; - if (lsg->length == 0) - trim_sg = 1; - - DPRINTK("padding done, sg[%d].length=%u pad_len=%u\n", - qc->n_elem - 1, lsg->length, qc->pad_len); - } - - pre_n_elem = qc->n_elem; - if (trim_sg && pre_n_elem) - pre_n_elem--; - - if (!pre_n_elem) { - n_elem = 0; - goto skip_map; - } - - dir = qc->dma_dir; - n_elem = dma_map_sg(ap->dev, sg, pre_n_elem, dir); - if (n_elem < 1) { - /* restore last sg */ - lsg->length += qc->pad_len; - return -1; + DPRINTK("%d sg elements mapped\n", n_elem); } - DPRINTK("%d sg elements mapped\n", n_elem); - -skip_map: - qc->n_elem = n_elem; + qc->n_elem = qc->mapped_n_elem = n_elem; + qc->n_elem += n_elem_extra; + qc->nbytes += nbytes_extra; + qc->flags |= ATA_QCFLAG_DMAMAP; return 0; } @@ -4985,7 +4921,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) /** * ata_data_xfer - Transfer data by PIO - * @adev: device to target + * @dev: device to target * @buf: data buffer * @buflen: buffer length * @write_data: read/write @@ -4994,37 +4930,44 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) * * LOCKING: * Inherited from caller. + * + * RETURNS: + * Bytes consumed. */ -void ata_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) +unsigned int ata_data_xfer(struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) { - struct ata_port *ap = adev->link->ap; + struct ata_port *ap = dev->link->ap; + void __iomem *data_addr = ap->ioaddr.data_addr; unsigned int words = buflen >> 1; /* Transfer multiple of 2 bytes */ - if (write_data) - iowrite16_rep(ap->ioaddr.data_addr, buf, words); + if (rw == READ) + ioread16_rep(data_addr, buf, words); else - ioread16_rep(ap->ioaddr.data_addr, buf, words); + iowrite16_rep(data_addr, buf, words); /* Transfer trailing 1 byte, if any. */ if (unlikely(buflen & 0x01)) { - u16 align_buf[1] = { 0 }; + __le16 align_buf[1] = { 0 }; unsigned char *trailing_buf = buf + buflen - 1; - if (write_data) { - memcpy(align_buf, trailing_buf, 1); - iowrite16(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr); - } else { - align_buf[0] = cpu_to_le16(ioread16(ap->ioaddr.data_addr)); + if (rw == READ) { + align_buf[0] = cpu_to_le16(ioread16(data_addr)); memcpy(trailing_buf, align_buf, 1); + } else { + memcpy(align_buf, trailing_buf, 1); + iowrite16(le16_to_cpu(align_buf[0]), data_addr); } + words++; } + + return words << 1; } /** * ata_data_xfer_noirq - Transfer data by PIO - * @adev: device to target + * @dev: device to target * @buf: data buffer * @buflen: buffer length * @write_data: read/write @@ -5034,14 +4977,21 @@ void ata_data_xfer(struct ata_device *adev, unsigned char *buf, * * LOCKING: * Inherited from caller. + * + * RETURNS: + * Bytes consumed. */ -void ata_data_xfer_noirq(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) +unsigned int ata_data_xfer_noirq(struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) { unsigned long flags; + unsigned int consumed; + local_irq_save(flags); - ata_data_xfer(adev, buf, buflen, write_data); + consumed = ata_data_xfer(dev, buf, buflen, rw); local_irq_restore(flags); + + return consumed; } @@ -5152,13 +5102,13 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) ata_altstatus(ap); /* flush */ switch (qc->tf.protocol) { - case ATA_PROT_ATAPI: + case ATAPI_PROT_PIO: ap->hsm_task_state = HSM_ST; break; - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_NODATA: ap->hsm_task_state = HSM_ST_LAST; break; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: ap->hsm_task_state = HSM_ST_LAST; /* initiate bmdma */ ap->ops->bmdma_start(qc); @@ -5300,12 +5250,15 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) bytes = (bc_hi << 8) | bc_lo; /* shall be cleared to zero, indicating xfer of data */ - if (ireason & (1 << 0)) + if (unlikely(ireason & (1 << 0))) goto err_out; /* make sure transfer direction matches expected */ i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0; - if (do_write != i_write) + if (unlikely(do_write != i_write)) + goto err_out; + + if (unlikely(!bytes)) goto err_out; VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes); @@ -5341,7 +5294,7 @@ static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *q (qc->tf.flags & ATA_TFLAG_WRITE)) return 1; - if (is_atapi_taskfile(&qc->tf) && + if (ata_is_atapi(qc->tf.protocol) && !(qc->dev->flags & ATA_DFLAG_CDB_INTR)) return 1; } @@ -5506,7 +5459,7 @@ fsm_start: case HSM_ST: /* complete command or read/write the data register */ - if (qc->tf.protocol == ATA_PROT_ATAPI) { + if (qc->tf.protocol == ATAPI_PROT_PIO) { /* ATAPI PIO protocol */ if ((status & ATA_DRQ) == 0) { /* No more data to transfer or device error. @@ -5664,7 +5617,7 @@ fsm_start: msleep(2); status = ata_busy_wait(ap, ATA_BUSY, 10); if (status & ATA_BUSY) { - ata_port_queue_task(ap, ata_pio_task, qc, ATA_SHORT_PAUSE); + ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE); return; } } @@ -5805,6 +5758,22 @@ static void fill_result_tf(struct ata_queued_cmd *qc) ap->ops->tf_read(ap, &qc->result_tf); } +static void ata_verify_xfer(struct ata_queued_cmd *qc) +{ + struct ata_device *dev = qc->dev; + + if (ata_tag_internal(qc->tag)) + return; + + if (ata_is_nodata(qc->tf.protocol)) + return; + + if ((dev->mwdma_mask || dev->udma_mask) && ata_is_pio(qc->tf.protocol)) + return; + + dev->flags &= ~ATA_DFLAG_DUBIOUS_XFER; +} + /** * ata_qc_complete - Complete an active ATA command * @qc: Command to complete @@ -5876,6 +5845,9 @@ void ata_qc_complete(struct ata_queued_cmd *qc) break; } + if (unlikely(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) + ata_verify_xfer(qc); + __ata_qc_complete(qc); } else { if (qc->flags & ATA_QCFLAG_EH_SCHEDULED) @@ -5938,30 +5910,6 @@ int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active, return nr_done; } -static inline int ata_should_dma_map(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - switch (qc->tf.protocol) { - case ATA_PROT_NCQ: - case ATA_PROT_DMA: - case ATA_PROT_ATAPI_DMA: - return 1; - - case ATA_PROT_ATAPI: - case ATA_PROT_PIO: - if (ap->flags & ATA_FLAG_PIO_DMA) - return 1; - - /* fall through */ - - default: - return 0; - } - - /* never reached */ -} - /** * ata_qc_issue - issue taskfile to device * @qc: command to issue to device @@ -5978,6 +5926,7 @@ void ata_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct ata_link *link = qc->dev->link; + u8 prot = qc->tf.protocol; /* Make sure only one non-NCQ command is outstanding. The * check is skipped for old EH because it reuses active qc to @@ -5985,7 +5934,7 @@ void ata_qc_issue(struct ata_queued_cmd *qc) */ WARN_ON(ap->ops->error_handler && ata_tag_valid(link->active_tag)); - if (qc->tf.protocol == ATA_PROT_NCQ) { + if (ata_is_ncq(prot)) { WARN_ON(link->sactive & (1 << qc->tag)); if (!link->sactive) @@ -6001,17 +5950,18 @@ void ata_qc_issue(struct ata_queued_cmd *qc) qc->flags |= ATA_QCFLAG_ACTIVE; ap->qc_active |= 1 << qc->tag; - if (ata_should_dma_map(qc)) { - if (qc->flags & ATA_QCFLAG_SG) { - if (ata_sg_setup(qc)) - goto sg_err; - } else if (qc->flags & ATA_QCFLAG_SINGLE) { - if (ata_sg_setup_one(qc)) - goto sg_err; - } - } else { - qc->flags &= ~ATA_QCFLAG_DMAMAP; - } + /* We guarantee to LLDs that they will have at least one + * non-zero sg if the command is a data command. + */ + BUG_ON(ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes)); + + /* ata_sg_setup() may update nbytes */ + qc->raw_nbytes = qc->nbytes; + + if (ata_is_dma(prot) || (ata_is_pio(prot) && + (ap->flags & ATA_FLAG_PIO_DMA))) + if (ata_sg_setup(qc)) + goto sg_err; /* if device is sleeping, schedule softreset and abort the link */ if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) { @@ -6029,7 +5979,6 @@ void ata_qc_issue(struct ata_queued_cmd *qc) return; sg_err: - qc->flags &= ~ATA_QCFLAG_DMAMAP; qc->err_mask |= AC_ERR_SYSTEM; err: ata_qc_complete(qc); @@ -6064,11 +6013,11 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) switch (qc->tf.protocol) { case ATA_PROT_PIO: case ATA_PROT_NODATA: - case ATA_PROT_ATAPI: - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_PIO: + case ATAPI_PROT_NODATA: qc->tf.flags |= ATA_TFLAG_POLLING; break; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: if (qc->dev->flags & ATA_DFLAG_CDB_INTR) /* see ata_dma_blacklisted() */ BUG(); @@ -6091,7 +6040,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) ap->hsm_task_state = HSM_ST_LAST; if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_port_queue_task(ap, ata_pio_task, qc, 0); + ata_pio_queue_task(ap, qc, 0); break; @@ -6113,7 +6062,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) if (qc->tf.flags & ATA_TFLAG_WRITE) { /* PIO data out protocol */ ap->hsm_task_state = HSM_ST_FIRST; - ata_port_queue_task(ap, ata_pio_task, qc, 0); + ata_pio_queue_task(ap, qc, 0); /* always send first data block using * the ata_pio_task() codepath. @@ -6123,7 +6072,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) ap->hsm_task_state = HSM_ST; if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_port_queue_task(ap, ata_pio_task, qc, 0); + ata_pio_queue_task(ap, qc, 0); /* if polling, ata_pio_task() handles the rest. * otherwise, interrupt handler takes over from here. @@ -6132,8 +6081,8 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) break; - case ATA_PROT_ATAPI: - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_PIO: + case ATAPI_PROT_NODATA: if (qc->tf.flags & ATA_TFLAG_POLLING) ata_qc_set_polling(qc); @@ -6144,10 +6093,10 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) /* send cdb by polling if no cdb interrupt */ if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || (qc->tf.flags & ATA_TFLAG_POLLING)) - ata_port_queue_task(ap, ata_pio_task, qc, 0); + ata_pio_queue_task(ap, qc, 0); break; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ @@ -6156,7 +6105,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) /* send cdb by polling if no cdb interrupt */ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - ata_port_queue_task(ap, ata_pio_task, qc, 0); + ata_pio_queue_task(ap, qc, 0); break; default: @@ -6200,15 +6149,15 @@ inline unsigned int ata_host_intr(struct ata_port *ap, */ /* Check the ATA_DFLAG_CDB_INTR flag is enough here. - * The flag was turned on only for atapi devices. - * No need to check is_atapi_taskfile(&qc->tf) again. + * The flag was turned on only for atapi devices. No + * need to check ata_is_atapi(qc->tf.protocol) again. */ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) goto idle_irq; break; case HSM_ST_LAST: if (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA) { + qc->tf.protocol == ATAPI_PROT_DMA) { /* check status of DMA engine */ host_stat = ap->ops->bmdma_status(ap); VPRINTK("ata%u: host_stat 0x%X\n", @@ -6250,7 +6199,7 @@ inline unsigned int ata_host_intr(struct ata_port *ap, ata_hsm_move(ap, qc, status, 0); if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA)) + qc->tf.protocol == ATAPI_PROT_DMA)) ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat); return 1; /* irq handled */ @@ -6772,7 +6721,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host) ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN; #endif - INIT_DELAYED_WORK(&ap->port_task, NULL); + INIT_DELAYED_WORK(&ap->port_task, ata_pio_task); INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug); INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan); INIT_LIST_HEAD(&ap->eh_done_q); @@ -7589,7 +7538,6 @@ EXPORT_SYMBOL_GPL(ata_host_register); EXPORT_SYMBOL_GPL(ata_host_activate); EXPORT_SYMBOL_GPL(ata_host_detach); EXPORT_SYMBOL_GPL(ata_sg_init); -EXPORT_SYMBOL_GPL(ata_sg_init_one); EXPORT_SYMBOL_GPL(ata_hsm_move); EXPORT_SYMBOL_GPL(ata_qc_complete); EXPORT_SYMBOL_GPL(ata_qc_complete_multiple); @@ -7601,6 +7549,13 @@ EXPORT_SYMBOL_GPL(ata_std_dev_select); EXPORT_SYMBOL_GPL(sata_print_link_status); EXPORT_SYMBOL_GPL(ata_tf_to_fis); EXPORT_SYMBOL_GPL(ata_tf_from_fis); +EXPORT_SYMBOL_GPL(ata_pack_xfermask); +EXPORT_SYMBOL_GPL(ata_unpack_xfermask); +EXPORT_SYMBOL_GPL(ata_xfer_mask2mode); +EXPORT_SYMBOL_GPL(ata_xfer_mode2mask); +EXPORT_SYMBOL_GPL(ata_xfer_mode2shift); +EXPORT_SYMBOL_GPL(ata_mode_string); +EXPORT_SYMBOL_GPL(ata_id_xfermask); EXPORT_SYMBOL_GPL(ata_check_status); EXPORT_SYMBOL_GPL(ata_altstatus); EXPORT_SYMBOL_GPL(ata_exec_command); @@ -7643,7 +7598,6 @@ EXPORT_SYMBOL_GPL(ata_wait_register); EXPORT_SYMBOL_GPL(ata_busy_sleep); EXPORT_SYMBOL_GPL(ata_wait_after_reset); EXPORT_SYMBOL_GPL(ata_wait_ready); -EXPORT_SYMBOL_GPL(ata_port_queue_task); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_slave_config); @@ -7662,18 +7616,20 @@ EXPORT_SYMBOL_GPL(ata_host_resume); #endif /* CONFIG_PM */ EXPORT_SYMBOL_GPL(ata_id_string); EXPORT_SYMBOL_GPL(ata_id_c_string); -EXPORT_SYMBOL_GPL(ata_id_to_dma_mode); EXPORT_SYMBOL_GPL(ata_scsi_simulate); EXPORT_SYMBOL_GPL(ata_pio_need_iordy); +EXPORT_SYMBOL_GPL(ata_timing_find_mode); EXPORT_SYMBOL_GPL(ata_timing_compute); EXPORT_SYMBOL_GPL(ata_timing_merge); +EXPORT_SYMBOL_GPL(ata_timing_cycle2mode); #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(pci_test_config_bits); EXPORT_SYMBOL_GPL(ata_pci_init_sff_host); EXPORT_SYMBOL_GPL(ata_pci_init_bmdma); EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host); +EXPORT_SYMBOL_GPL(ata_pci_activate_sff_host); EXPORT_SYMBOL_GPL(ata_pci_init_one); EXPORT_SYMBOL_GPL(ata_pci_remove_one); #ifdef CONFIG_PM @@ -7715,4 +7671,5 @@ EXPORT_SYMBOL_GPL(ata_dev_try_classify); EXPORT_SYMBOL_GPL(ata_cable_40wire); EXPORT_SYMBOL_GPL(ata_cable_80wire); EXPORT_SYMBOL_GPL(ata_cable_unknown); +EXPORT_SYMBOL_GPL(ata_cable_ignore); EXPORT_SYMBOL_GPL(ata_cable_sata); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 21a81cd148e4..4e31071acc02 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -46,9 +46,26 @@ #include "libata.h" enum { + /* speed down verdicts */ ATA_EH_SPDN_NCQ_OFF = (1 << 0), ATA_EH_SPDN_SPEED_DOWN = (1 << 1), ATA_EH_SPDN_FALLBACK_TO_PIO = (1 << 2), + ATA_EH_SPDN_KEEP_ERRORS = (1 << 3), + + /* error flags */ + ATA_EFLAG_IS_IO = (1 << 0), + ATA_EFLAG_DUBIOUS_XFER = (1 << 1), + + /* error categories */ + ATA_ECAT_NONE = 0, + ATA_ECAT_ATA_BUS = 1, + ATA_ECAT_TOUT_HSM = 2, + ATA_ECAT_UNK_DEV = 3, + ATA_ECAT_DUBIOUS_NONE = 4, + ATA_ECAT_DUBIOUS_ATA_BUS = 5, + ATA_ECAT_DUBIOUS_TOUT_HSM = 6, + ATA_ECAT_DUBIOUS_UNK_DEV = 7, + ATA_ECAT_NR = 8, }; /* Waiting in ->prereset can never be reliable. It's sometimes nice @@ -213,12 +230,13 @@ void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset, if (offset < 0) ata_port_desc(ap, "%s %s%llu@0x%llx", name, type, len, start); else - ata_port_desc(ap, "%s 0x%llx", name, start + offset); + ata_port_desc(ap, "%s 0x%llx", name, + start + (unsigned long long)offset); } #endif /* CONFIG_PCI */ -static void ata_ering_record(struct ata_ering *ering, int is_io, +static void ata_ering_record(struct ata_ering *ering, unsigned int eflags, unsigned int err_mask) { struct ata_ering_entry *ent; @@ -229,11 +247,20 @@ static void ata_ering_record(struct ata_ering *ering, int is_io, ering->cursor %= ATA_ERING_SIZE; ent = &ering->ring[ering->cursor]; - ent->is_io = is_io; + ent->eflags = eflags; ent->err_mask = err_mask; ent->timestamp = get_jiffies_64(); } +static struct ata_ering_entry *ata_ering_top(struct ata_ering *ering) +{ + struct ata_ering_entry *ent = &ering->ring[ering->cursor]; + + if (ent->err_mask) + return ent; + return NULL; +} + static void ata_ering_clear(struct ata_ering *ering) { memset(ering, 0, sizeof(*ering)); @@ -445,9 +472,20 @@ void ata_scsi_error(struct Scsi_Host *host) spin_lock_irqsave(ap->lock, flags); __ata_port_for_each_link(link, ap) { + struct ata_eh_context *ehc = &link->eh_context; + struct ata_device *dev; + memset(&link->eh_context, 0, sizeof(link->eh_context)); link->eh_context.i = link->eh_info; memset(&link->eh_info, 0, sizeof(link->eh_info)); + + ata_link_for_each_dev(dev, link) { + int devno = dev->devno; + + ehc->saved_xfer_mode[devno] = dev->xfer_mode; + if (ata_ncq_enabled(dev)) + ehc->saved_ncq_enabled |= 1 << devno; + } } ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS; @@ -1260,10 +1298,10 @@ static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc) /* is it pointless to prefer PIO for "safety reasons"? */ if (ap->flags & ATA_FLAG_PIO_DMA) { - tf.protocol = ATA_PROT_ATAPI_DMA; + tf.protocol = ATAPI_PROT_DMA; tf.feature |= ATAPI_PKT_DMA; } else { - tf.protocol = ATA_PROT_ATAPI; + tf.protocol = ATAPI_PROT_PIO; tf.lbam = SCSI_SENSE_BUFFERSIZE; tf.lbah = 0; } @@ -1451,20 +1489,29 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, return action; } -static int ata_eh_categorize_error(int is_io, unsigned int err_mask) +static int ata_eh_categorize_error(unsigned int eflags, unsigned int err_mask, + int *xfer_ok) { + int base = 0; + + if (!(eflags & ATA_EFLAG_DUBIOUS_XFER)) + *xfer_ok = 1; + + if (!*xfer_ok) + base = ATA_ECAT_DUBIOUS_NONE; + if (err_mask & AC_ERR_ATA_BUS) - return 1; + return base + ATA_ECAT_ATA_BUS; if (err_mask & AC_ERR_TIMEOUT) - return 2; + return base + ATA_ECAT_TOUT_HSM; - if (is_io) { + if (eflags & ATA_EFLAG_IS_IO) { if (err_mask & AC_ERR_HSM) - return 2; + return base + ATA_ECAT_TOUT_HSM; if ((err_mask & (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV) - return 3; + return base + ATA_ECAT_UNK_DEV; } return 0; @@ -1472,18 +1519,22 @@ static int ata_eh_categorize_error(int is_io, unsigned int err_mask) struct speed_down_verdict_arg { u64 since; - int nr_errors[4]; + int xfer_ok; + int nr_errors[ATA_ECAT_NR]; }; static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg) { struct speed_down_verdict_arg *arg = void_arg; - int cat = ata_eh_categorize_error(ent->is_io, ent->err_mask); + int cat; if (ent->timestamp < arg->since) return -1; + cat = ata_eh_categorize_error(ent->eflags, ent->err_mask, + &arg->xfer_ok); arg->nr_errors[cat]++; + return 0; } @@ -1495,22 +1546,48 @@ static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg) * whether NCQ needs to be turned off, transfer speed should be * stepped down, or falling back to PIO is necessary. * - * Cat-1 is ATA_BUS error for any command. + * ECAT_ATA_BUS : ATA_BUS error for any command + * + * ECAT_TOUT_HSM : TIMEOUT for any command or HSM violation for + * IO commands + * + * ECAT_UNK_DEV : Unknown DEV error for IO commands + * + * ECAT_DUBIOUS_* : Identical to above three but occurred while + * data transfer hasn't been verified. + * + * Verdicts are + * + * NCQ_OFF : Turn off NCQ. + * + * SPEED_DOWN : Speed down transfer speed but don't fall back + * to PIO. + * + * FALLBACK_TO_PIO : Fall back to PIO. + * + * Even if multiple verdicts are returned, only one action is + * taken per error. An action triggered by non-DUBIOUS errors + * clears ering, while one triggered by DUBIOUS_* errors doesn't. + * This is to expedite speed down decisions right after device is + * initially configured. * - * Cat-2 is TIMEOUT for any command or HSM violation for known - * supported commands. + * The followings are speed down rules. #1 and #2 deal with + * DUBIOUS errors. * - * Cat-3 is is unclassified DEV error for known supported - * command. + * 1. If more than one DUBIOUS_ATA_BUS or DUBIOUS_TOUT_HSM errors + * occurred during last 5 mins, SPEED_DOWN and FALLBACK_TO_PIO. * - * NCQ needs to be turned off if there have been more than 3 - * Cat-2 + Cat-3 errors during last 10 minutes. + * 2. If more than one DUBIOUS_TOUT_HSM or DUBIOUS_UNK_DEV errors + * occurred during last 5 mins, NCQ_OFF. * - * Speed down is necessary if there have been more than 3 Cat-1 + - * Cat-2 errors or 10 Cat-3 errors during last 10 minutes. + * 3. If more than 8 ATA_BUS, TOUT_HSM or UNK_DEV errors + * ocurred during last 5 mins, FALLBACK_TO_PIO * - * Falling back to PIO mode is necessary if there have been more - * than 10 Cat-1 + Cat-2 + Cat-3 errors during last 5 minutes. + * 4. If more than 3 TOUT_HSM or UNK_DEV errors occurred + * during last 10 mins, NCQ_OFF. + * + * 5. If more than 3 ATA_BUS or TOUT_HSM errors, or more than 6 + * UNK_DEV errors occurred during last 10 mins, SPEED_DOWN. * * LOCKING: * Inherited from caller. @@ -1525,23 +1602,38 @@ static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev) struct speed_down_verdict_arg arg; unsigned int verdict = 0; - /* scan past 10 mins of error history */ + /* scan past 5 mins of error history */ memset(&arg, 0, sizeof(arg)); - arg.since = j64 - min(j64, j10mins); + arg.since = j64 - min(j64, j5mins); ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg); - if (arg.nr_errors[2] + arg.nr_errors[3] > 3) - verdict |= ATA_EH_SPDN_NCQ_OFF; - if (arg.nr_errors[1] + arg.nr_errors[2] > 3 || arg.nr_errors[3] > 10) - verdict |= ATA_EH_SPDN_SPEED_DOWN; + if (arg.nr_errors[ATA_ECAT_DUBIOUS_ATA_BUS] + + arg.nr_errors[ATA_ECAT_DUBIOUS_TOUT_HSM] > 1) + verdict |= ATA_EH_SPDN_SPEED_DOWN | + ATA_EH_SPDN_FALLBACK_TO_PIO | ATA_EH_SPDN_KEEP_ERRORS; - /* scan past 3 mins of error history */ + if (arg.nr_errors[ATA_ECAT_DUBIOUS_TOUT_HSM] + + arg.nr_errors[ATA_ECAT_DUBIOUS_UNK_DEV] > 1) + verdict |= ATA_EH_SPDN_NCQ_OFF | ATA_EH_SPDN_KEEP_ERRORS; + + if (arg.nr_errors[ATA_ECAT_ATA_BUS] + + arg.nr_errors[ATA_ECAT_TOUT_HSM] + + arg.nr_errors[ATA_ECAT_UNK_DEV] > 6) + verdict |= ATA_EH_SPDN_FALLBACK_TO_PIO; + + /* scan past 10 mins of error history */ memset(&arg, 0, sizeof(arg)); - arg.since = j64 - min(j64, j5mins); + arg.since = j64 - min(j64, j10mins); ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg); - if (arg.nr_errors[1] + arg.nr_errors[2] + arg.nr_errors[3] > 10) - verdict |= ATA_EH_SPDN_FALLBACK_TO_PIO; + if (arg.nr_errors[ATA_ECAT_TOUT_HSM] + + arg.nr_errors[ATA_ECAT_UNK_DEV] > 3) + verdict |= ATA_EH_SPDN_NCQ_OFF; + + if (arg.nr_errors[ATA_ECAT_ATA_BUS] + + arg.nr_errors[ATA_ECAT_TOUT_HSM] > 3 || + arg.nr_errors[ATA_ECAT_UNK_DEV] > 6) + verdict |= ATA_EH_SPDN_SPEED_DOWN; return verdict; } @@ -1549,7 +1641,7 @@ static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev) /** * ata_eh_speed_down - record error and speed down if necessary * @dev: Failed device - * @is_io: Did the device fail during normal IO? + * @eflags: mask of ATA_EFLAG_* flags * @err_mask: err_mask of the error * * Record error and examine error history to determine whether @@ -1563,18 +1655,20 @@ static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev) * RETURNS: * Determined recovery action. */ -static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io, - unsigned int err_mask) +static unsigned int ata_eh_speed_down(struct ata_device *dev, + unsigned int eflags, unsigned int err_mask) { + struct ata_link *link = dev->link; + int xfer_ok = 0; unsigned int verdict; unsigned int action = 0; /* don't bother if Cat-0 error */ - if (ata_eh_categorize_error(is_io, err_mask) == 0) + if (ata_eh_categorize_error(eflags, err_mask, &xfer_ok) == 0) return 0; /* record error and determine whether speed down is necessary */ - ata_ering_record(&dev->ering, is_io, err_mask); + ata_ering_record(&dev->ering, eflags, err_mask); verdict = ata_eh_speed_down_verdict(dev); /* turn off NCQ? */ @@ -1590,7 +1684,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io, /* speed down? */ if (verdict & ATA_EH_SPDN_SPEED_DOWN) { /* speed down SATA link speed if possible */ - if (sata_down_spd_limit(dev->link) == 0) { + if (sata_down_spd_limit(link) == 0) { action |= ATA_EH_HARDRESET; goto done; } @@ -1618,10 +1712,10 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io, } /* Fall back to PIO? Slowing down to PIO is meaningless for - * SATA. Consider it only for PATA. + * SATA ATA devices. Consider it only for PATA and SATAPI. */ if ((verdict & ATA_EH_SPDN_FALLBACK_TO_PIO) && (dev->spdn_cnt >= 2) && - (dev->link->ap->cbl != ATA_CBL_SATA) && + (link->ap->cbl != ATA_CBL_SATA || dev->class == ATA_DEV_ATAPI) && (dev->xfer_shift != ATA_SHIFT_PIO)) { if (ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO) == 0) { dev->spdn_cnt = 0; @@ -1633,7 +1727,8 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io, return 0; done: /* device has been slowed down, blow error history */ - ata_ering_clear(&dev->ering); + if (!(verdict & ATA_EH_SPDN_KEEP_ERRORS)) + ata_ering_clear(&dev->ering); return action; } @@ -1653,8 +1748,8 @@ static void ata_eh_link_autopsy(struct ata_link *link) struct ata_port *ap = link->ap; struct ata_eh_context *ehc = &link->eh_context; struct ata_device *dev; - unsigned int all_err_mask = 0; - int tag, is_io = 0; + unsigned int all_err_mask = 0, eflags = 0; + int tag; u32 serror; int rc; @@ -1713,15 +1808,15 @@ static void ata_eh_link_autopsy(struct ata_link *link) ehc->i.dev = qc->dev; all_err_mask |= qc->err_mask; if (qc->flags & ATA_QCFLAG_IO) - is_io = 1; + eflags |= ATA_EFLAG_IS_IO; } /* enforce default EH actions */ if (ap->pflags & ATA_PFLAG_FROZEN || all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT)) ehc->i.action |= ATA_EH_SOFTRESET; - else if ((is_io && all_err_mask) || - (!is_io && (all_err_mask & ~AC_ERR_DEV))) + else if (((eflags & ATA_EFLAG_IS_IO) && all_err_mask) || + (!(eflags & ATA_EFLAG_IS_IO) && (all_err_mask & ~AC_ERR_DEV))) ehc->i.action |= ATA_EH_REVALIDATE; /* If we have offending qcs and the associated failed device, @@ -1743,8 +1838,11 @@ static void ata_eh_link_autopsy(struct ata_link *link) ata_dev_enabled(link->device)))) dev = link->device; - if (dev) - ehc->i.action |= ata_eh_speed_down(dev, is_io, all_err_mask); + if (dev) { + if (dev->flags & ATA_DFLAG_DUBIOUS_XFER) + eflags |= ATA_EFLAG_DUBIOUS_XFER; + ehc->i.action |= ata_eh_speed_down(dev, eflags, all_err_mask); + } DPRINTK("EXIT\n"); } @@ -1880,8 +1978,8 @@ static void ata_eh_link_report(struct ata_link *link) [ATA_PROT_PIO] = "pio", [ATA_PROT_DMA] = "dma", [ATA_PROT_NCQ] = "ncq", - [ATA_PROT_ATAPI] = "pio", - [ATA_PROT_ATAPI_DMA] = "dma", + [ATAPI_PROT_PIO] = "pio", + [ATAPI_PROT_DMA] = "dma", }; snprintf(data_buf, sizeof(data_buf), " %s %u %s", @@ -1889,7 +1987,7 @@ static void ata_eh_link_report(struct ata_link *link) dma_str[qc->dma_dir]); } - if (is_atapi_taskfile(&qc->tf)) + if (ata_is_atapi(qc->tf.protocol)) snprintf(cdb_buf, sizeof(cdb_buf), "cdb %02x %02x %02x %02x %02x %02x %02x %02x " "%02x %02x %02x %02x %02x %02x %02x %02x\n ", @@ -2329,6 +2427,58 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, return rc; } +/** + * ata_set_mode - Program timings and issue SET FEATURES - XFER + * @link: link on which timings will be programmed + * @r_failed_dev: out paramter for failed device + * + * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If + * ata_set_mode() fails, pointer to the failing device is + * returned in @r_failed_dev. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * 0 on success, negative errno otherwise + */ +int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) +{ + struct ata_port *ap = link->ap; + struct ata_device *dev; + int rc; + + /* if data transfer is verified, clear DUBIOUS_XFER on ering top */ + ata_link_for_each_dev(dev, link) { + if (!(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) { + struct ata_ering_entry *ent; + + ent = ata_ering_top(&dev->ering); + if (ent) + ent->eflags &= ~ATA_EFLAG_DUBIOUS_XFER; + } + } + + /* has private set_mode? */ + if (ap->ops->set_mode) + rc = ap->ops->set_mode(link, r_failed_dev); + else + rc = ata_do_set_mode(link, r_failed_dev); + + /* if transfer mode has changed, set DUBIOUS_XFER on device */ + ata_link_for_each_dev(dev, link) { + struct ata_eh_context *ehc = &link->eh_context; + u8 saved_xfer_mode = ehc->saved_xfer_mode[dev->devno]; + u8 saved_ncq = !!(ehc->saved_ncq_enabled & (1 << dev->devno)); + + if (dev->xfer_mode != saved_xfer_mode || + ata_ncq_enabled(dev) != saved_ncq) + dev->flags |= ATA_DFLAG_DUBIOUS_XFER; + } + + return rc; +} + static int ata_link_nr_enabled(struct ata_link *link) { struct ata_device *dev; @@ -2375,6 +2525,24 @@ static int ata_eh_skip_recovery(struct ata_link *link) return 1; } +static int ata_eh_schedule_probe(struct ata_device *dev) +{ + struct ata_eh_context *ehc = &dev->link->eh_context; + + if (!(ehc->i.probe_mask & (1 << dev->devno)) || + (ehc->did_probe_mask & (1 << dev->devno))) + return 0; + + ata_eh_detach_dev(dev); + ata_dev_init(dev); + ehc->did_probe_mask |= (1 << dev->devno); + ehc->i.action |= ATA_EH_SOFTRESET; + ehc->saved_xfer_mode[dev->devno] = 0; + ehc->saved_ncq_enabled &= ~(1 << dev->devno); + + return 1; +} + static int ata_eh_handle_dev_fail(struct ata_device *dev, int err) { struct ata_eh_context *ehc = &dev->link->eh_context; @@ -2406,16 +2574,9 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err) if (ata_link_offline(dev->link)) ata_eh_detach_dev(dev); - /* probe if requested */ - if ((ehc->i.probe_mask & (1 << dev->devno)) && - !(ehc->did_probe_mask & (1 << dev->devno))) { - ata_eh_detach_dev(dev); - ata_dev_init(dev); - + /* schedule probe if necessary */ + if (ata_eh_schedule_probe(dev)) ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; - ehc->did_probe_mask |= (1 << dev->devno); - ehc->i.action |= ATA_EH_SOFTRESET; - } return 1; } else { @@ -2492,14 +2653,9 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, if (dev->flags & ATA_DFLAG_DETACH) ata_eh_detach_dev(dev); - if (!ata_dev_enabled(dev) && - ((ehc->i.probe_mask & (1 << dev->devno)) && - !(ehc->did_probe_mask & (1 << dev->devno)))) { - ata_eh_detach_dev(dev); - ata_dev_init(dev); - ehc->did_probe_mask |= (1 << dev->devno); - ehc->i.action |= ATA_EH_SOFTRESET; - } + /* schedule probe if necessary */ + if (!ata_dev_enabled(dev)) + ata_eh_schedule_probe(dev); } } @@ -2747,6 +2903,7 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap) if (ap->ops->port_suspend) rc = ap->ops->port_suspend(ap, ap->pm_mesg); + ata_acpi_set_state(ap, PMSG_SUSPEND); out: /* report result */ spin_lock_irqsave(ap->lock, flags); @@ -2792,6 +2949,8 @@ static void ata_eh_handle_port_resume(struct ata_port *ap) WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED)); + ata_acpi_set_state(ap, PMSG_ON); + if (ap->ops->port_resume) rc = ap->ops->port_resume(ap); diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 14daf4848f09..3fd08201bef4 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -517,7 +517,7 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev, qc->scsicmd = cmd; qc->scsidone = done; - qc->__sg = scsi_sglist(cmd); + qc->sg = scsi_sglist(cmd); qc->n_elem = scsi_sg_count(cmd); } else { cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1); @@ -2210,7 +2210,7 @@ unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, /* sector size */ ATA_SCSI_RBUF_SET(6, ATA_SECT_SIZE >> 8); - ATA_SCSI_RBUF_SET(7, ATA_SECT_SIZE); + ATA_SCSI_RBUF_SET(7, ATA_SECT_SIZE & 0xff); } else { /* sector count, 64-bit */ ATA_SCSI_RBUF_SET(0, last_lba >> (8 * 7)); @@ -2224,7 +2224,7 @@ unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, /* sector size */ ATA_SCSI_RBUF_SET(10, ATA_SECT_SIZE >> 8); - ATA_SCSI_RBUF_SET(11, ATA_SECT_SIZE); + ATA_SCSI_RBUF_SET(11, ATA_SECT_SIZE & 0xff); } return 0; @@ -2331,7 +2331,7 @@ static void atapi_request_sense(struct ata_queued_cmd *qc) DPRINTK("ATAPI request sense\n"); /* FIXME: is this needed? */ - memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); + memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); ap->ops->tf_read(ap, &qc->tf); @@ -2341,7 +2341,9 @@ static void atapi_request_sense(struct ata_queued_cmd *qc) ata_qc_reinit(qc); - ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); + /* setup sg table and init transfer direction */ + sg_init_one(&qc->sgent, cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE); + ata_sg_init(qc, &qc->sgent, 1); qc->dma_dir = DMA_FROM_DEVICE; memset(&qc->cdb, 0, qc->dev->cdb_len); @@ -2352,10 +2354,10 @@ static void atapi_request_sense(struct ata_queued_cmd *qc) qc->tf.command = ATA_CMD_PACKET; if (ata_pio_use_silly(ap)) { - qc->tf.protocol = ATA_PROT_ATAPI_DMA; + qc->tf.protocol = ATAPI_PROT_DMA; qc->tf.feature |= ATAPI_PKT_DMA; } else { - qc->tf.protocol = ATA_PROT_ATAPI; + qc->tf.protocol = ATAPI_PROT_PIO; qc->tf.lbam = SCSI_SENSE_BUFFERSIZE; qc->tf.lbah = 0; } @@ -2526,12 +2528,12 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) if (using_pio || nodata) { /* no data, or PIO data xfer */ if (nodata) - qc->tf.protocol = ATA_PROT_ATAPI_NODATA; + qc->tf.protocol = ATAPI_PROT_NODATA; else - qc->tf.protocol = ATA_PROT_ATAPI; + qc->tf.protocol = ATAPI_PROT_PIO; } else { /* DMA data xfer */ - qc->tf.protocol = ATA_PROT_ATAPI_DMA; + qc->tf.protocol = ATAPI_PROT_DMA; qc->tf.feature |= ATAPI_PKT_DMA; if (atapi_dmadir && (scmd->sc_data_direction != DMA_TO_DEVICE)) @@ -2690,6 +2692,24 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) if ((tf->protocol = ata_scsi_map_proto(cdb[1])) == ATA_PROT_UNKNOWN) goto invalid_fld; + /* + * Filter TPM commands by default. These provide an + * essentially uncontrolled encrypted "back door" between + * applications and the disk. Set libata.allow_tpm=1 if you + * have a real reason for wanting to use them. This ensures + * that installed software cannot easily mess stuff up without + * user intent. DVR type users will probably ship with this enabled + * for movie content management. + * + * Note that for ATA8 we can issue a DCS change and DCS freeze lock + * for this and should do in future but that it is not sufficient as + * DCS is an optional feature set. Thus we also do the software filter + * so that we comply with the TC consortium stated goal that the user + * can turn off TC features of their system. + */ + if (tf->command >= 0x5C && tf->command <= 0x5F && !libata_allow_tpm) + goto invalid_fld; + /* We may not issue DMA commands if no DMA mode is set */ if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0) goto invalid_fld; diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index b7ac80b4b1fb..60cd4b179766 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -147,7 +147,9 @@ void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) * @tf: ATA taskfile register set for storing input * * Reads ATA taskfile registers for currently-selected device - * into @tf. + * into @tf. Assumes the device has a fully SFF compliant task file + * layout and behaviour. If you device does not (eg has a different + * status method) then you will need to provide a replacement tf_read * * LOCKING: * Inherited from caller. @@ -156,7 +158,7 @@ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; - tf->command = ata_chk_status(ap); + tf->command = ata_check_status(ap); tf->feature = ioread8(ioaddr->error_addr); tf->nsect = ioread8(ioaddr->nsect_addr); tf->lbal = ioread8(ioaddr->lbal_addr); @@ -415,7 +417,7 @@ void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ap->hsm_task_state = HSM_ST_IDLE; if (qc && (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA)) { + qc->tf.protocol == ATAPI_PROT_DMA)) { u8 host_stat; host_stat = ap->ops->bmdma_status(ap); @@ -549,7 +551,7 @@ int ata_pci_init_bmdma(struct ata_host *host) return rc; /* request and iomap DMA region */ - rc = pcim_iomap_regions(pdev, 1 << 4, DRV_NAME); + rc = pcim_iomap_regions(pdev, 1 << 4, dev_driver_string(gdev)); if (rc) { dev_printk(KERN_ERR, gdev, "failed to request/iomap BAR4\n"); return -ENOMEM; @@ -619,7 +621,8 @@ int ata_pci_init_sff_host(struct ata_host *host) continue; } - rc = pcim_iomap_regions(pdev, 0x3 << base, DRV_NAME); + rc = pcim_iomap_regions(pdev, 0x3 << base, + dev_driver_string(gdev)); if (rc) { dev_printk(KERN_WARNING, gdev, "failed to request/iomap BARs for port %d " @@ -711,6 +714,99 @@ int ata_pci_prepare_sff_host(struct pci_dev *pdev, } /** + * ata_pci_activate_sff_host - start SFF host, request IRQ and register it + * @host: target SFF ATA host + * @irq_handler: irq_handler used when requesting IRQ(s) + * @sht: scsi_host_template to use when registering the host + * + * This is the counterpart of ata_host_activate() for SFF ATA + * hosts. This separate helper is necessary because SFF hosts + * use two separate interrupts in legacy mode. + * + * LOCKING: + * Inherited from calling layer (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_pci_activate_sff_host(struct ata_host *host, + irq_handler_t irq_handler, + struct scsi_host_template *sht) +{ + struct device *dev = host->dev; + struct pci_dev *pdev = to_pci_dev(dev); + const char *drv_name = dev_driver_string(host->dev); + int legacy_mode = 0, rc; + + rc = ata_host_start(host); + if (rc) + return rc; + + if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { + u8 tmp8, mask; + + /* TODO: What if one channel is in native mode ... */ + pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); + mask = (1 << 2) | (1 << 0); + if ((tmp8 & mask) != mask) + legacy_mode = 1; +#if defined(CONFIG_NO_ATA_LEGACY) + /* Some platforms with PCI limits cannot address compat + port space. In that case we punt if their firmware has + left a device in compatibility mode */ + if (legacy_mode) { + printk(KERN_ERR "ata: Compatibility mode ATA is not supported on this platform, skipping.\n"); + return -EOPNOTSUPP; + } +#endif + } + + if (!devres_open_group(dev, NULL, GFP_KERNEL)) + return -ENOMEM; + + if (!legacy_mode && pdev->irq) { + rc = devm_request_irq(dev, pdev->irq, irq_handler, + IRQF_SHARED, drv_name, host); + if (rc) + goto out; + + ata_port_desc(host->ports[0], "irq %d", pdev->irq); + ata_port_desc(host->ports[1], "irq %d", pdev->irq); + } else if (legacy_mode) { + if (!ata_port_is_dummy(host->ports[0])) { + rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev), + irq_handler, IRQF_SHARED, + drv_name, host); + if (rc) + goto out; + + ata_port_desc(host->ports[0], "irq %d", + ATA_PRIMARY_IRQ(pdev)); + } + + if (!ata_port_is_dummy(host->ports[1])) { + rc = devm_request_irq(dev, ATA_SECONDARY_IRQ(pdev), + irq_handler, IRQF_SHARED, + drv_name, host); + if (rc) + goto out; + + ata_port_desc(host->ports[1], "irq %d", + ATA_SECONDARY_IRQ(pdev)); + } + } + + rc = ata_host_register(host, sht); + out: + if (rc == 0) + devres_remove_group(dev, NULL); + else + devres_release_group(dev, NULL); + + return rc; +} + +/** * ata_pci_init_one - Initialize/register PCI IDE host controller * @pdev: Controller to be initialized * @ppi: array of port_info, must be enough for two ports @@ -739,8 +835,6 @@ int ata_pci_init_one(struct pci_dev *pdev, struct device *dev = &pdev->dev; const struct ata_port_info *pi = NULL; struct ata_host *host = NULL; - u8 mask; - int legacy_mode = 0; int i, rc; DPRINTK("ENTER\n"); @@ -762,95 +856,24 @@ int ata_pci_init_one(struct pci_dev *pdev, if (!devres_open_group(dev, NULL, GFP_KERNEL)) return -ENOMEM; - /* FIXME: Really for ATA it isn't safe because the device may be - multi-purpose and we want to leave it alone if it was already - enabled. Secondly for shared use as Arjan says we want refcounting - - Checking dev->is_enabled is insufficient as this is not set at - boot for the primary video which is BIOS enabled - */ - rc = pcim_enable_device(pdev); if (rc) - goto err_out; + goto out; - if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { - u8 tmp8; - - /* TODO: What if one channel is in native mode ... */ - pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); - mask = (1 << 2) | (1 << 0); - if ((tmp8 & mask) != mask) - legacy_mode = 1; -#if defined(CONFIG_NO_ATA_LEGACY) - /* Some platforms with PCI limits cannot address compat - port space. In that case we punt if their firmware has - left a device in compatibility mode */ - if (legacy_mode) { - printk(KERN_ERR "ata: Compatibility mode ATA is not supported on this platform, skipping.\n"); - rc = -EOPNOTSUPP; - goto err_out; - } -#endif - } - - /* prepare host */ + /* prepare and activate SFF host */ rc = ata_pci_prepare_sff_host(pdev, ppi, &host); if (rc) - goto err_out; + goto out; pci_set_master(pdev); + rc = ata_pci_activate_sff_host(host, pi->port_ops->irq_handler, + pi->sht); + out: + if (rc == 0) + devres_remove_group(&pdev->dev, NULL); + else + devres_release_group(&pdev->dev, NULL); - /* start host and request IRQ */ - rc = ata_host_start(host); - if (rc) - goto err_out; - - if (!legacy_mode && pdev->irq) { - /* We may have no IRQ assigned in which case we can poll. This - shouldn't happen on a sane system but robustness is cheap - in this case */ - rc = devm_request_irq(dev, pdev->irq, pi->port_ops->irq_handler, - IRQF_SHARED, DRV_NAME, host); - if (rc) - goto err_out; - - ata_port_desc(host->ports[0], "irq %d", pdev->irq); - ata_port_desc(host->ports[1], "irq %d", pdev->irq); - } else if (legacy_mode) { - if (!ata_port_is_dummy(host->ports[0])) { - rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev), - pi->port_ops->irq_handler, - IRQF_SHARED, DRV_NAME, host); - if (rc) - goto err_out; - - ata_port_desc(host->ports[0], "irq %d", - ATA_PRIMARY_IRQ(pdev)); - } - - if (!ata_port_is_dummy(host->ports[1])) { - rc = devm_request_irq(dev, ATA_SECONDARY_IRQ(pdev), - pi->port_ops->irq_handler, - IRQF_SHARED, DRV_NAME, host); - if (rc) - goto err_out; - - ata_port_desc(host->ports[1], "irq %d", - ATA_SECONDARY_IRQ(pdev)); - } - } - - /* register */ - rc = ata_host_register(host, pi->sht); - if (rc) - goto err_out; - - devres_remove_group(dev, NULL); - return 0; - -err_out: - devres_release_group(dev, NULL); return rc; } diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index bbe59c2fd1e2..409ffb9af163 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -60,6 +60,7 @@ extern int atapi_dmadir; extern int atapi_passthru16; extern int libata_fua; extern int libata_noacpi; +extern int libata_allow_tpm; extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev); extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, u64 block, u32 n_block, unsigned int tf_flags, @@ -85,7 +86,6 @@ extern int ata_dev_configure(struct ata_device *dev); extern int sata_down_spd_limit(struct ata_link *link); extern int sata_set_spd_needed(struct ata_link *link); extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel); -extern int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev); extern void ata_sg_clean(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); @@ -113,6 +113,7 @@ extern int ata_acpi_on_suspend(struct ata_port *ap); extern void ata_acpi_on_resume(struct ata_port *ap); extern int ata_acpi_on_devcfg(struct ata_device *dev); extern void ata_acpi_on_disable(struct ata_device *dev); +extern void ata_acpi_set_state(struct ata_port *ap, pm_message_t state); #else static inline void ata_acpi_associate_sata_port(struct ata_port *ap) { } static inline void ata_acpi_associate(struct ata_host *host) { } @@ -121,6 +122,8 @@ static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; } static inline void ata_acpi_on_resume(struct ata_port *ap) { } static inline int ata_acpi_on_devcfg(struct ata_device *dev) { return 0; } static inline void ata_acpi_on_disable(struct ata_device *dev) { } +static inline void ata_acpi_set_state(struct ata_port *ap, + pm_message_t state) { } #endif /* libata-scsi.c */ @@ -183,6 +186,7 @@ extern void ata_eh_report(struct ata_port *ap); extern int ata_eh_reset(struct ata_link *link, int classify, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset); +extern int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev); extern int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset, diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c index e4542ab9c7f8..244098a80ce4 100644 --- a/drivers/ata/pata_acpi.c +++ b/drivers/ata/pata_acpi.c @@ -81,17 +81,6 @@ static void pacpi_error_handler(struct ata_port *ap) NULL, ata_std_postreset); } -/* Welcome to ACPI, bring a bucket */ -static const unsigned int pio_cycle[7] = { - 600, 383, 240, 180, 120, 100, 80 -}; -static const unsigned int mwdma_cycle[5] = { - 480, 150, 120, 100, 80 -}; -static const unsigned int udma_cycle[7] = { - 120, 80, 60, 45, 30, 20, 15 -}; - /** * pacpi_discover_modes - filter non ACPI modes * @adev: ATA device @@ -103,56 +92,20 @@ static const unsigned int udma_cycle[7] = { static unsigned long pacpi_discover_modes(struct ata_port *ap, struct ata_device *adev) { - int unit = adev->devno; struct pata_acpi *acpi = ap->private_data; - int i; - u32 t; - unsigned long mask = (0x7f << ATA_SHIFT_UDMA) | (0x7 << ATA_SHIFT_MWDMA) | (0x1F << ATA_SHIFT_PIO); - struct ata_acpi_gtm probe; + unsigned int xfer_mask; probe = acpi->gtm; - /* We always use the 0 slot for crap hardware */ - if (!(probe.flags & 0x10)) - unit = 0; - ata_acpi_gtm(ap, &probe); - /* Start by scanning for PIO modes */ - for (i = 0; i < 7; i++) { - t = probe.drive[unit].pio; - if (t <= pio_cycle[i]) { - mask |= (2 << (ATA_SHIFT_PIO + i)) - 1; - break; - } - } + xfer_mask = ata_acpi_gtm_xfermask(adev, &probe); - /* See if we have MWDMA or UDMA data. We don't bother with MWDMA - if UDMA is availabe as this means the BIOS set UDMA and our - error changedown if it works is UDMA to PIO anyway */ - if (probe.flags & (1 << (2 * unit))) { - /* MWDMA */ - for (i = 0; i < 5; i++) { - t = probe.drive[unit].dma; - if (t <= mwdma_cycle[i]) { - mask |= (2 << (ATA_SHIFT_MWDMA + i)) - 1; - break; - } - } - } else { - /* UDMA */ - for (i = 0; i < 7; i++) { - t = probe.drive[unit].dma; - if (t <= udma_cycle[i]) { - mask |= (2 << (ATA_SHIFT_UDMA + i)) - 1; - break; - } - } - } - if (mask & (0xF8 << ATA_SHIFT_UDMA)) + if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA)) ap->cbl = ATA_CBL_PATA80; - return mask; + + return xfer_mask; } /** @@ -180,12 +133,14 @@ static void pacpi_set_piomode(struct ata_port *ap, struct ata_device *adev) { int unit = adev->devno; struct pata_acpi *acpi = ap->private_data; + const struct ata_timing *t; if (!(acpi->gtm.flags & 0x10)) unit = 0; /* Now stuff the nS values into the structure */ - acpi->gtm.drive[unit].pio = pio_cycle[adev->pio_mode - XFER_PIO_0]; + t = ata_timing_find_mode(adev->pio_mode); + acpi->gtm.drive[unit].pio = t->cycle; ata_acpi_stm(ap, &acpi->gtm); /* See what mode we actually got */ ata_acpi_gtm(ap, &acpi->gtm); @@ -201,16 +156,18 @@ static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev) { int unit = adev->devno; struct pata_acpi *acpi = ap->private_data; + const struct ata_timing *t; if (!(acpi->gtm.flags & 0x10)) unit = 0; /* Now stuff the nS values into the structure */ + t = ata_timing_find_mode(adev->dma_mode); if (adev->dma_mode >= XFER_UDMA_0) { - acpi->gtm.drive[unit].dma = udma_cycle[adev->dma_mode - XFER_UDMA_0]; + acpi->gtm.drive[unit].dma = t->udma; acpi->gtm.flags |= (1 << (2 * unit)); } else { - acpi->gtm.drive[unit].dma = mwdma_cycle[adev->dma_mode - XFER_MW_DMA_0]; + acpi->gtm.drive[unit].dma = t->cycle; acpi->gtm.flags &= ~(1 << (2 * unit)); } ata_acpi_stm(ap, &acpi->gtm); diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 8caf9afc8b90..7e68edf3c0f3 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -64,7 +64,7 @@ static int ali_cable_override(struct pci_dev *pdev) if (pdev->subsystem_vendor == 0x10CF && pdev->subsystem_device == 0x10AF) return 1; /* Mitac 8317 (Winbook-A) and relatives */ - if (pdev->subsystem_vendor == 0x1071 && pdev->subsystem_device == 0x8317) + if (pdev->subsystem_vendor == 0x1071 && pdev->subsystem_device == 0x8317) return 1; /* Systems by DMI */ if (dmi_check_system(cable_dmi_table)) diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 3cc27b514654..761a66608d7b 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -220,6 +220,62 @@ static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev) timing_setup(ap, adev, 0x40, adev->dma_mode, 4); } +/* Both host-side and drive-side detection results are worthless on NV + * PATAs. Ignore them and just follow what BIOS configured. Both the + * current configuration in PCI config reg and ACPI GTM result are + * cached during driver attach and are consulted to select transfer + * mode. + */ +static unsigned long nv_mode_filter(struct ata_device *dev, + unsigned long xfer_mask) +{ + static const unsigned int udma_mask_map[] = + { ATA_UDMA2, ATA_UDMA1, ATA_UDMA0, 0, + ATA_UDMA3, ATA_UDMA4, ATA_UDMA5, ATA_UDMA6 }; + struct ata_port *ap = dev->link->ap; + char acpi_str[32] = ""; + u32 saved_udma, udma; + const struct ata_acpi_gtm *gtm; + unsigned long bios_limit = 0, acpi_limit = 0, limit; + + /* find out what BIOS configured */ + udma = saved_udma = (unsigned long)ap->host->private_data; + + if (ap->port_no == 0) + udma >>= 16; + if (dev->devno == 0) + udma >>= 8; + + if ((udma & 0xc0) == 0xc0) + bios_limit = ata_pack_xfermask(0, 0, udma_mask_map[udma & 0x7]); + + /* consult ACPI GTM too */ + gtm = ata_acpi_init_gtm(ap); + if (gtm) { + acpi_limit = ata_acpi_gtm_xfermask(dev, gtm); + + snprintf(acpi_str, sizeof(acpi_str), " (%u:%u:0x%x)", + gtm->drive[0].dma, gtm->drive[1].dma, gtm->flags); + } + + /* be optimistic, EH can take care of things if something goes wrong */ + limit = bios_limit | acpi_limit; + + /* If PIO or DMA isn't configured at all, don't limit. Let EH + * handle it. + */ + if (!(limit & ATA_MASK_PIO)) + limit |= ATA_MASK_PIO; + if (!(limit & (ATA_MASK_MWDMA | ATA_MASK_UDMA))) + limit |= ATA_MASK_MWDMA | ATA_MASK_UDMA; + + ata_port_printk(ap, KERN_DEBUG, "nv_mode_filter: 0x%lx&0x%lx->0x%lx, " + "BIOS=0x%lx (0x%x) ACPI=0x%lx%s\n", + xfer_mask, limit, xfer_mask & limit, bios_limit, + saved_udma, acpi_limit, acpi_str); + + return xfer_mask & limit; +} /** * nv_probe_init - cable detection @@ -252,31 +308,6 @@ static void nv_error_handler(struct ata_port *ap) ata_std_postreset); } -static int nv_cable_detect(struct ata_port *ap) -{ - static const u8 bitmask[2] = {0x03, 0x0C}; - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - u8 ata66; - u16 udma; - int cbl; - - pci_read_config_byte(pdev, 0x52, &ata66); - if (ata66 & bitmask[ap->port_no]) - cbl = ATA_CBL_PATA80; - else - cbl = ATA_CBL_PATA40; - - /* We now have to double check because the Nvidia boxes BIOS - doesn't always set the cable bits but does set mode bits */ - pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma); - if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400) - cbl = ATA_CBL_PATA80; - /* And a triple check across suspend/resume with ACPI around */ - if (ata_acpi_cbl_80wire(ap)) - cbl = ATA_CBL_PATA80; - return cbl; -} - /** * nv100_set_piomode - set initial PIO mode data * @ap: ATA interface @@ -314,6 +345,14 @@ static void nv133_set_dmamode(struct ata_port *ap, struct ata_device *adev) timing_setup(ap, adev, 0x50, adev->dma_mode, 4); } +static void nv_host_stop(struct ata_host *host) +{ + u32 udma = (unsigned long)host->private_data; + + /* restore PCI config register 0x60 */ + pci_write_config_dword(to_pci_dev(host->dev), 0x60, udma); +} + static struct scsi_host_template amd_sht = { .module = THIS_MODULE, .name = DRV_NAME, @@ -478,7 +517,8 @@ static struct ata_port_operations nv100_port_ops = { .thaw = ata_bmdma_thaw, .error_handler = nv_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, - .cable_detect = nv_cable_detect, + .cable_detect = ata_cable_ignore, + .mode_filter = nv_mode_filter, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -495,6 +535,7 @@ static struct ata_port_operations nv100_port_ops = { .irq_on = ata_irq_on, .port_start = ata_sff_port_start, + .host_stop = nv_host_stop, }; static struct ata_port_operations nv133_port_ops = { @@ -511,7 +552,8 @@ static struct ata_port_operations nv133_port_ops = { .thaw = ata_bmdma_thaw, .error_handler = nv_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, - .cable_detect = nv_cable_detect, + .cable_detect = ata_cable_ignore, + .mode_filter = nv_mode_filter, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -528,6 +570,7 @@ static struct ata_port_operations nv133_port_ops = { .irq_on = ata_irq_on, .port_start = ata_sff_port_start, + .host_stop = nv_host_stop, }; static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) @@ -614,7 +657,8 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &amd100_port_ops } }; - const struct ata_port_info *ppi[] = { NULL, NULL }; + struct ata_port_info pi; + const struct ata_port_info *ppi[] = { &pi, NULL }; static int printed_version; int type = id->driver_data; u8 fifo; @@ -628,6 +672,19 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (type == 1 && pdev->revision > 0x7) type = 2; + /* Serenade ? */ + if (type == 5 && pdev->subsystem_vendor == PCI_VENDOR_ID_AMD && + pdev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE) + type = 6; /* UDMA 100 only */ + + /* + * Okay, type is determined now. Apply type-specific workarounds. + */ + pi = info[type]; + + if (type < 3) + ata_pci_clear_simplex(pdev); + /* Check for AMD7411 */ if (type == 3) /* FIFO is broken */ @@ -635,16 +692,17 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) else pci_write_config_byte(pdev, 0x41, fifo | 0xF0); - /* Serenade ? */ - if (type == 5 && pdev->subsystem_vendor == PCI_VENDOR_ID_AMD && - pdev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE) - type = 6; /* UDMA 100 only */ + /* Cable detection on Nvidia chips doesn't work too well, + * cache BIOS programmed UDMA mode. + */ + if (type == 7 || type == 8) { + u32 udma; - if (type < 3) - ata_pci_clear_simplex(pdev); + pci_read_config_dword(pdev, 0x60, &udma); + pi.private_data = (void *)(unsigned long)udma; + } /* And fire it up */ - ppi[0] = &info[type]; return ata_pci_init_one(pdev, ppi); } diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index 7842cc487359..a32e3c44a606 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -832,6 +832,7 @@ static void bfin_bmdma_setup(struct ata_queued_cmd *qc) { unsigned short config = WDSIZE_16; struct scatterlist *sg; + unsigned int si; pr_debug("in atapi dma setup\n"); /* Program the ATA_CTRL register with dir */ @@ -839,7 +840,7 @@ static void bfin_bmdma_setup(struct ata_queued_cmd *qc) /* fill the ATAPI DMA controller */ set_dma_config(CH_ATAPI_TX, config); set_dma_x_modify(CH_ATAPI_TX, 2); - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { set_dma_start_addr(CH_ATAPI_TX, sg_dma_address(sg)); set_dma_x_count(CH_ATAPI_TX, sg_dma_len(sg) >> 1); } @@ -848,7 +849,7 @@ static void bfin_bmdma_setup(struct ata_queued_cmd *qc) /* fill the ATAPI DMA controller */ set_dma_config(CH_ATAPI_RX, config); set_dma_x_modify(CH_ATAPI_RX, 2); - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { set_dma_start_addr(CH_ATAPI_RX, sg_dma_address(sg)); set_dma_x_count(CH_ATAPI_RX, sg_dma_len(sg) >> 1); } @@ -867,6 +868,7 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; struct scatterlist *sg; + unsigned int si; pr_debug("in atapi dma start\n"); if (!(ap->udma_mask || ap->mwdma_mask)) @@ -881,7 +883,7 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc) * data cache is enabled. Otherwise, this loop * is an empty loop and optimized out. */ - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { flush_dcache_range(sg_dma_address(sg), sg_dma_address(sg) + sg_dma_len(sg)); } @@ -910,7 +912,7 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc) ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | TFRCNT_RST); /* Set transfer length to buffer len */ - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { ATAPI_SET_XFER_LEN(base, (sg_dma_len(sg) >> 1)); } @@ -932,6 +934,7 @@ static void bfin_bmdma_stop(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct scatterlist *sg; + unsigned int si; pr_debug("in atapi dma stop\n"); if (!(ap->udma_mask || ap->mwdma_mask)) @@ -950,7 +953,7 @@ static void bfin_bmdma_stop(struct ata_queued_cmd *qc) * data cache is enabled. Otherwise, this loop * is an empty loop and optimized out. */ - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { invalidate_dcache_range( sg_dma_address(sg), sg_dma_address(sg) @@ -1167,34 +1170,36 @@ static unsigned char bfin_bmdma_status(struct ata_port *ap) * Note: Original code is ata_data_xfer(). */ -static void bfin_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) +static unsigned int bfin_data_xfer(struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) { - struct ata_port *ap = adev->link->ap; - unsigned int words = buflen >> 1; - unsigned short *buf16 = (u16 *) buf; + struct ata_port *ap = dev->link->ap; void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + unsigned int words = buflen >> 1; + unsigned short *buf16 = (u16 *)buf; /* Transfer multiple of 2 bytes */ - if (write_data) { - write_atapi_data(base, words, buf16); - } else { + if (rw == READ) read_atapi_data(base, words, buf16); - } + else + write_atapi_data(base, words, buf16); /* Transfer trailing 1 byte, if any. */ if (unlikely(buflen & 0x01)) { unsigned short align_buf[1] = { 0 }; unsigned char *trailing_buf = buf + buflen - 1; - if (write_data) { - memcpy(align_buf, trailing_buf, 1); - write_atapi_data(base, 1, align_buf); - } else { + if (rw == READ) { read_atapi_data(base, 1, align_buf); memcpy(trailing_buf, align_buf, 1); + } else { + memcpy(align_buf, trailing_buf, 1); + write_atapi_data(base, 1, align_buf); } + words++; } + + return words << 1; } /** diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index 33f7f0843f4f..d4590f546c49 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -198,7 +198,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi }; const struct ata_port_info *ppi[2]; u8 pcicfg; - void *iomap[5]; + void __iomem *iomap[5]; struct ata_host *host; struct ata_ioports *ioaddr; int i, rc; diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index c79f066c2bc9..68eb34929cec 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -847,15 +847,16 @@ static u32 hpt374_read_freq(struct pci_dev *pdev) u32 freq; unsigned long io_base = pci_resource_start(pdev, 4); if (PCI_FUNC(pdev->devfn) & 1) { - struct pci_dev *pdev_0 = pci_get_slot(pdev->bus, pdev->devfn - 1); + struct pci_dev *pdev_0; + + pdev_0 = pci_get_slot(pdev->bus, pdev->devfn - 1); /* Someone hot plugged the controller on us ? */ if (pdev_0 == NULL) return 0; io_base = pci_resource_start(pdev_0, 4); freq = inl(io_base + 0x90); pci_dev_put(pdev_0); - } - else + } else freq = inl(io_base + 0x90); return freq; } diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c index 842fe08a3c13..5b8586dac63b 100644 --- a/drivers/ata/pata_icside.c +++ b/drivers/ata/pata_icside.c @@ -224,6 +224,7 @@ static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc) struct pata_icside_state *state = ap->host->private_data; struct scatterlist *sg, *rsg = state->sg; unsigned int write = qc->tf.flags & ATA_TFLAG_WRITE; + unsigned int si; /* * We are simplex; BUG if we try to fiddle with DMA @@ -234,7 +235,7 @@ static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc) /* * Copy ATAs scattered sg list into a contiguous array of sg */ - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { memcpy(rsg, sg, sizeof(*sg)); rsg++; } diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index ca9aae09daed..109ddd42c266 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -430,7 +430,7 @@ static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc) return ata_qc_issue_prot(qc); } printk(KERN_DEBUG "it821x: can't process command 0x%02X\n", qc->tf.command); - return AC_ERR_INVALID; + return AC_ERR_DEV; } /** @@ -516,6 +516,37 @@ static void it821x_dev_config(struct ata_device *adev) printk("(%dK stripe)", adev->id[146]); printk(".\n"); } + /* This is a controller firmware triggered funny, don't + report the drive faulty! */ + adev->horkage &= ~ATA_HORKAGE_DIAGNOSTIC; +} + +/** + * it821x_ident_hack - Hack identify data up + * @ap: Port + * + * Walk the devices on this firmware driven port and slightly + * mash the identify data to stop us and common tools trying to + * use features not firmware supported. The firmware itself does + * some masking (eg SMART) but not enough. + * + * This is a bit of an abuse of the cable method, but it is the + * only method called at the right time. We could modify the libata + * core specifically for ident hacking but while we have one offender + * it seems better to keep the fallout localised. + */ + +static int it821x_ident_hack(struct ata_port *ap) +{ + struct ata_device *adev; + ata_link_for_each_dev(adev, &ap->link) { + if (ata_dev_enabled(adev)) { + adev->id[84] &= ~(1 << 6); /* No FUA */ + adev->id[85] &= ~(1 << 10); /* No HPA */ + adev->id[76] = 0; /* No NCQ/AN etc */ + } + } + return ata_cable_unknown(ap); } @@ -634,7 +665,7 @@ static struct ata_port_operations it821x_smart_port_ops = { .thaw = ata_bmdma_thaw, .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, - .cable_detect = ata_cable_unknown, + .cable_detect = it821x_ident_hack, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c index 120b5bfa7ce6..030878fedeb5 100644 --- a/drivers/ata/pata_ixp4xx_cf.c +++ b/drivers/ata/pata_ixp4xx_cf.c @@ -42,13 +42,13 @@ static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error) return 0; } -static void ixp4xx_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) +static unsigned int ixp4xx_mmio_data_xfer(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw) { unsigned int i; unsigned int words = buflen >> 1; u16 *buf16 = (u16 *) buf; - struct ata_port *ap = adev->link->ap; + struct ata_port *ap = dev->link->ap; void __iomem *mmio = ap->ioaddr.data_addr; struct ixp4xx_pata_data *data = ap->host->dev->platform_data; @@ -59,30 +59,32 @@ static void ixp4xx_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, udelay(100); /* Transfer multiple of 2 bytes */ - if (write_data) { - for (i = 0; i < words; i++) - writew(buf16[i], mmio); - } else { + if (rw == READ) for (i = 0; i < words; i++) buf16[i] = readw(mmio); - } + else + for (i = 0; i < words; i++) + writew(buf16[i], mmio); /* Transfer trailing 1 byte, if any. */ if (unlikely(buflen & 0x01)) { u16 align_buf[1] = { 0 }; unsigned char *trailing_buf = buf + buflen - 1; - if (write_data) { - memcpy(align_buf, trailing_buf, 1); - writew(align_buf[0], mmio); - } else { + if (rw == READ) { align_buf[0] = readw(mmio); memcpy(trailing_buf, align_buf, 1); + } else { + memcpy(align_buf, trailing_buf, 1); + writew(align_buf[0], mmio); } + words++; } udelay(100); *data->cs0_cfg |= 0x01; + + return words << 1; } static struct scsi_host_template ixp4xx_sht = { diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 17159b5e1e43..333dc15f8ccf 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -28,7 +28,6 @@ * * Unsupported but docs exist: * Appian/Adaptec AIC25VL01/Cirrus Logic PD7220 - * Winbond W83759A * * This driver handles legacy (that is "ISA/VLB side") IDE ports found * on PC class systems. There are three hybrid devices that are exceptions @@ -36,7 +35,7 @@ * the MPIIX where the tuning is PCI side but the IDE is "ISA side". * * Specific support is included for the ht6560a/ht6560b/opti82c611a/ - * opti82c465mv/promise 20230c/20630 + * opti82c465mv/promise 20230c/20630/winbond83759A * * Use the autospeed and pio_mask options with: * Appian ADI/2 aka CLPD7220 or AIC25VL01. @@ -47,9 +46,6 @@ * For now use autospeed and pio_mask as above with the W83759A. This may * change. * - * TODO - * Merge existing pata_qdi driver - * */ #include <linux/kernel.h> @@ -64,12 +60,13 @@ #include <linux/platform_device.h> #define DRV_NAME "pata_legacy" -#define DRV_VERSION "0.5.5" +#define DRV_VERSION "0.6.5" #define NR_HOST 6 -static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 }; -static int legacy_irq[NR_HOST] = { 14, 15, 11, 10, 8, 12 }; +static int all; +module_param(all, int, 0444); +MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)"); struct legacy_data { unsigned long timing; @@ -80,21 +77,107 @@ struct legacy_data { }; +enum controller { + BIOS = 0, + SNOOP = 1, + PDC20230 = 2, + HT6560A = 3, + HT6560B = 4, + OPTI611A = 5, + OPTI46X = 6, + QDI6500 = 7, + QDI6580 = 8, + QDI6580DP = 9, /* Dual channel mode is different */ + W83759A = 10, + + UNKNOWN = -1 +}; + + +struct legacy_probe { + unsigned char *name; + unsigned long port; + unsigned int irq; + unsigned int slot; + enum controller type; + unsigned long private; +}; + +struct legacy_controller { + const char *name; + struct ata_port_operations *ops; + unsigned int pio_mask; + unsigned int flags; + int (*setup)(struct platform_device *, struct legacy_probe *probe, + struct legacy_data *data); +}; + +static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 }; + +static struct legacy_probe probe_list[NR_HOST]; static struct legacy_data legacy_data[NR_HOST]; static struct ata_host *legacy_host[NR_HOST]; static int nr_legacy_host; -static int probe_all; /* Set to check all ISA port ranges */ -static int ht6560a; /* HT 6560A on primary 1, secondary 2, both 3 */ -static int ht6560b; /* HT 6560A on primary 1, secondary 2, both 3 */ -static int opti82c611a; /* Opti82c611A on primary 1, secondary 2, both 3 */ -static int opti82c46x; /* Opti 82c465MV present (pri/sec autodetect) */ -static int autospeed; /* Chip present which snoops speed changes */ -static int pio_mask = 0x1F; /* PIO range for autospeed devices */ +static int probe_all; /* Set to check all ISA port ranges */ +static int ht6560a; /* HT 6560A on primary 1, second 2, both 3 */ +static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */ +static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */ +static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */ +static int qdi; /* Set to probe QDI controllers */ +static int winbond; /* Set to probe Winbond controllers, + give I/O port if non stdanard */ +static int autospeed; /* Chip present which snoops speed changes */ +static int pio_mask = 0x1F; /* PIO range for autospeed devices */ static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */ /** + * legacy_probe_add - Add interface to probe list + * @port: Controller port + * @irq: IRQ number + * @type: Controller type + * @private: Controller specific info + * + * Add an entry into the probe list for ATA controllers. This is used + * to add the default ISA slots and then to build up the table + * further according to other ISA/VLB/Weird device scans + * + * An I/O port list is used to keep ordering stable and sane, as we + * don't have any good way to talk about ordering otherwise + */ + +static int legacy_probe_add(unsigned long port, unsigned int irq, + enum controller type, unsigned long private) +{ + struct legacy_probe *lp = &probe_list[0]; + int i; + struct legacy_probe *free = NULL; + + for (i = 0; i < NR_HOST; i++) { + if (lp->port == 0 && free == NULL) + free = lp; + /* Matching port, or the correct slot for ordering */ + if (lp->port == port || legacy_port[i] == port) { + free = lp; + break; + } + lp++; + } + if (free == NULL) { + printk(KERN_ERR "pata_legacy: Too many interfaces.\n"); + return -1; + } + /* Fill in the entry for later probing */ + free->port = port; + free->irq = irq; + free->type = type; + free->private = private; + return 0; +} + + +/** * legacy_set_mode - mode setting * @link: IDE link * @unused: Device that failed when error is returned @@ -113,7 +196,8 @@ static int legacy_set_mode(struct ata_link *link, struct ata_device **unused) ata_link_for_each_dev(dev, link) { if (ata_dev_enabled(dev)) { - ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); + ata_dev_printk(dev, KERN_INFO, + "configured for PIO\n"); dev->pio_mode = XFER_PIO_0; dev->xfer_mode = XFER_PIO_0; dev->xfer_shift = ATA_SHIFT_PIO; @@ -171,7 +255,7 @@ static struct ata_port_operations simple_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static struct ata_port_operations legacy_port_ops = { @@ -198,15 +282,16 @@ static struct ata_port_operations legacy_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* * Promise 20230C and 20620 support * - * This controller supports PIO0 to PIO2. We set PIO timings conservatively to - * allow for 50MHz Vesa Local Bus. The 20620 DMA support is weird being DMA to - * controller and PIO'd to the host and not supported. + * This controller supports PIO0 to PIO2. We set PIO timings + * conservatively to allow for 50MHz Vesa Local Bus. The 20620 DMA + * support is weird being DMA to controller and PIO'd to the host + * and not supported. */ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) @@ -221,8 +306,7 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) local_irq_save(flags); /* Unlock the control interface */ - do - { + do { inb(0x1F5); outb(inb(0x1F2) | 0x80, 0x1F2); inb(0x1F2); @@ -231,7 +315,7 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) inb(0x1F2); inb(0x1F2); } - while((inb(0x1F2) & 0x80) && --tries); + while ((inb(0x1F2) & 0x80) && --tries); local_irq_restore(flags); @@ -249,13 +333,14 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) } -static void pdc_data_xfer_vlb(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) +static unsigned int pdc_data_xfer_vlb(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw) { - struct ata_port *ap = adev->link->ap; - int slop = buflen & 3; - unsigned long flags; + if (ata_id_has_dword_io(dev->id)) { + struct ata_port *ap = dev->link->ap; + int slop = buflen & 3; + unsigned long flags; - if (ata_id_has_dword_io(adev->id)) { local_irq_save(flags); /* Perform the 32bit I/O synchronization sequence */ @@ -264,26 +349,27 @@ static void pdc_data_xfer_vlb(struct ata_device *adev, unsigned char *buf, unsig ioread8(ap->ioaddr.nsect_addr); /* Now the data */ - - if (write_data) - iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); - else + if (rw == READ) ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); + else + iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { - __le32 pad = 0; - if (write_data) { - memcpy(&pad, buf + buflen - slop, slop); - iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); - } else { + u32 pad; + if (rw == READ) { pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); memcpy(buf + buflen - slop, &pad, slop); + } else { + memcpy(&pad, buf + buflen - slop, slop); + iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); } + buflen += 4 - slop; } local_irq_restore(flags); - } - else - ata_data_xfer_noirq(adev, buf, buflen, write_data); + } else + buflen = ata_data_xfer_noirq(dev, buf, buflen, rw); + + return buflen; } static struct ata_port_operations pdc20230_port_ops = { @@ -310,14 +396,14 @@ static struct ata_port_operations pdc20230_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* * Holtek 6560A support * - * This controller supports PIO0 to PIO2 (no IORDY even though higher timings - * can be loaded). + * This controller supports PIO0 to PIO2 (no IORDY even though higher + * timings can be loaded). */ static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev) @@ -364,14 +450,14 @@ static struct ata_port_operations ht6560a_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* * Holtek 6560B support * - * This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO setting - * unless we see an ATAPI device in which case we force it off. + * This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO + * setting unless we see an ATAPI device in which case we force it off. * * FIXME: need to implement 2nd channel support. */ @@ -398,7 +484,7 @@ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev) if (adev->class != ATA_DEV_ATA) { u8 rconf = inb(0x3E6); if (rconf & 0x24) { - rconf &= ~ 0x24; + rconf &= ~0x24; outb(rconf, 0x3E6); } } @@ -423,13 +509,13 @@ static struct ata_port_operations ht6560b_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */ + .data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */ .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* @@ -462,7 +548,8 @@ static u8 opti_syscfg(u8 reg) * This controller supports PIO0 to PIO3. */ -static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev) +static void opti82c611a_set_piomode(struct ata_port *ap, + struct ata_device *adev) { u8 active, recover, setup; struct ata_timing t; @@ -549,7 +636,7 @@ static struct ata_port_operations opti82c611a_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* @@ -681,77 +768,398 @@ static struct ata_port_operations opti82c46x_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; +static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_timing t; + struct legacy_data *qdi = ap->host->private_data; + int active, recovery; + u8 timing; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + if (qdi->fast) { + active = 8 - FIT(t.active, 1, 8); + recovery = 18 - FIT(t.recover, 3, 18); + } else { + active = 9 - FIT(t.active, 2, 9); + recovery = 15 - FIT(t.recover, 0, 15); + } + timing = (recovery << 4) | active | 0x08; + + qdi->clock[adev->devno] = timing; + + outb(timing, qdi->timing); +} /** - * legacy_init_one - attach a legacy interface - * @port: port number - * @io: I/O port start - * @ctrl: control port + * qdi6580dp_set_piomode - PIO setup for dual channel + * @ap: Port + * @adev: Device * @irq: interrupt line * - * Register an ISA bus IDE interface. Such interfaces are PIO and we - * assume do not support IRQ sharing. + * In dual channel mode the 6580 has one clock per channel and we have + * to software clockswitch in qc_issue_prot. */ -static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq) +static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev) { - struct legacy_data *ld = &legacy_data[nr_legacy_host]; - struct ata_host *host; - struct ata_port *ap; - struct platform_device *pdev; - struct ata_port_operations *ops = &legacy_port_ops; - void __iomem *io_addr, *ctrl_addr; - int pio_modes = pio_mask; - u32 mask = (1 << port); - u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY; - int ret; + struct ata_timing t; + struct legacy_data *qdi = ap->host->private_data; + int active, recovery; + u8 timing; - pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0); - if (IS_ERR(pdev)) - return PTR_ERR(pdev); + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + if (qdi->fast) { + active = 8 - FIT(t.active, 1, 8); + recovery = 18 - FIT(t.recover, 3, 18); + } else { + active = 9 - FIT(t.active, 2, 9); + recovery = 15 - FIT(t.recover, 0, 15); + } + timing = (recovery << 4) | active | 0x08; - ret = -EBUSY; - if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL || - devm_request_region(&pdev->dev, ctrl, 1, "pata_legacy") == NULL) - goto fail; + qdi->clock[adev->devno] = timing; - ret = -ENOMEM; - io_addr = devm_ioport_map(&pdev->dev, io, 8); - ctrl_addr = devm_ioport_map(&pdev->dev, ctrl, 1); - if (!io_addr || !ctrl_addr) - goto fail; + outb(timing, qdi->timing + 2 * ap->port_no); + /* Clear the FIFO */ + if (adev->class != ATA_DEV_ATA) + outb(0x5F, qdi->timing + 3); +} - if (ht6560a & mask) { - ops = &ht6560a_port_ops; - pio_modes = 0x07; - iordy = ATA_FLAG_NO_IORDY; - } - if (ht6560b & mask) { - ops = &ht6560b_port_ops; - pio_modes = 0x1F; - } - if (opti82c611a & mask) { - ops = &opti82c611a_port_ops; - pio_modes = 0x0F; +/** + * qdi6580_set_piomode - PIO setup for single channel + * @ap: Port + * @adev: Device + * + * In single channel mode the 6580 has one clock per device and we can + * avoid the requirement to clock switch. We also have to load the timing + * into the right clock according to whether we are master or slave. + */ + +static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_timing t; + struct legacy_data *qdi = ap->host->private_data; + int active, recovery; + u8 timing; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + if (qdi->fast) { + active = 8 - FIT(t.active, 1, 8); + recovery = 18 - FIT(t.recover, 3, 18); + } else { + active = 9 - FIT(t.active, 2, 9); + recovery = 15 - FIT(t.recover, 0, 15); } - if (opti82c46x & mask) { - ops = &opti82c46x_port_ops; - pio_modes = 0x0F; + timing = (recovery << 4) | active | 0x08; + qdi->clock[adev->devno] = timing; + outb(timing, qdi->timing + 2 * adev->devno); + /* Clear the FIFO */ + if (adev->class != ATA_DEV_ATA) + outb(0x5F, qdi->timing + 3); +} + +/** + * qdi_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings. + */ + +static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct legacy_data *qdi = ap->host->private_data; + + if (qdi->clock[adev->devno] != qdi->last) { + if (adev->pio_mode) { + qdi->last = qdi->clock[adev->devno]; + outb(qdi->clock[adev->devno], qdi->timing + + 2 * ap->port_no); + } } + return ata_qc_issue_prot(qc); +} - /* Probe for automatically detectable controllers */ +static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int rw) +{ + struct ata_port *ap = adev->link->ap; + int slop = buflen & 3; - if (io == 0x1F0 && ops == &legacy_port_ops) { - unsigned long flags; + if (ata_id_has_dword_io(adev->id)) { + if (rw == WRITE) + iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); + else + ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); - local_irq_save(flags); + if (unlikely(slop)) { + u32 pad; + if (rw == WRITE) { + memcpy(&pad, buf + buflen - slop, slop); + pad = le32_to_cpu(pad); + iowrite32(pad, ap->ioaddr.data_addr); + } else { + pad = ioread32(ap->ioaddr.data_addr); + pad = cpu_to_le32(pad); + memcpy(buf + buflen - slop, &pad, slop); + } + } + return (buflen + 3) & ~3; + } else + return ata_data_xfer(adev, buf, buflen, rw); +} + +static int qdi_port(struct platform_device *dev, + struct legacy_probe *lp, struct legacy_data *ld) +{ + if (devm_request_region(&dev->dev, lp->private, 4, "qdi") == NULL) + return -EBUSY; + ld->timing = lp->private; + return 0; +} + +static struct ata_port_operations qdi6500_port_ops = { + .set_piomode = qdi6500_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .qc_prep = ata_qc_prep, + .qc_issue = qdi_qc_issue_prot, + + .data_xfer = vlb32_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + + .port_start = ata_sff_port_start, +}; + +static struct ata_port_operations qdi6580_port_ops = { + .set_piomode = qdi6580_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .data_xfer = vlb32_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + + .port_start = ata_sff_port_start, +}; + +static struct ata_port_operations qdi6580dp_port_ops = { + .set_piomode = qdi6580dp_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .qc_prep = ata_qc_prep, + .qc_issue = qdi_qc_issue_prot, + + .data_xfer = vlb32_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + + .port_start = ata_sff_port_start, +}; + +static DEFINE_SPINLOCK(winbond_lock); + +static void winbond_writecfg(unsigned long port, u8 reg, u8 val) +{ + unsigned long flags; + spin_lock_irqsave(&winbond_lock, flags); + outb(reg, port + 0x01); + outb(val, port + 0x02); + spin_unlock_irqrestore(&winbond_lock, flags); +} + +static u8 winbond_readcfg(unsigned long port, u8 reg) +{ + u8 val; + + unsigned long flags; + spin_lock_irqsave(&winbond_lock, flags); + outb(reg, port + 0x01); + val = inb(port + 0x02); + spin_unlock_irqrestore(&winbond_lock, flags); + + return val; +} + +static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_timing t; + struct legacy_data *winbond = ap->host->private_data; + int active, recovery; + u8 reg; + int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2); + + reg = winbond_readcfg(winbond->timing, 0x81); + + /* Get the timing data in cycles */ + if (reg & 0x40) /* Fast VLB bus, assume 50MHz */ + ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); + else + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + active = (FIT(t.active, 3, 17) - 1) & 0x0F; + recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F; + timing = (active << 4) | recovery; + winbond_writecfg(winbond->timing, timing, reg); + + /* Load the setup timing */ + + reg = 0x35; + if (adev->class != ATA_DEV_ATA) + reg |= 0x08; /* FIFO off */ + if (!ata_pio_need_iordy(adev)) + reg |= 0x02; /* IORDY off */ + reg |= (FIT(t.setup, 0, 3) << 6); + winbond_writecfg(winbond->timing, timing + 1, reg); +} + +static int winbond_port(struct platform_device *dev, + struct legacy_probe *lp, struct legacy_data *ld) +{ + if (devm_request_region(&dev->dev, lp->private, 4, "winbond") == NULL) + return -EBUSY; + ld->timing = lp->private; + return 0; +} + +static struct ata_port_operations winbond_port_ops = { + .set_piomode = winbond_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .data_xfer = vlb32_data_xfer, + + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .port_start = ata_sff_port_start, +}; + +static struct legacy_controller controllers[] = { + {"BIOS", &legacy_port_ops, 0x1F, + ATA_FLAG_NO_IORDY, NULL }, + {"Snooping", &simple_port_ops, 0x1F, + 0 , NULL }, + {"PDC20230", &pdc20230_port_ops, 0x7, + ATA_FLAG_NO_IORDY, NULL }, + {"HT6560A", &ht6560a_port_ops, 0x07, + ATA_FLAG_NO_IORDY, NULL }, + {"HT6560B", &ht6560b_port_ops, 0x1F, + ATA_FLAG_NO_IORDY, NULL }, + {"OPTI82C611A", &opti82c611a_port_ops, 0x0F, + 0 , NULL }, + {"OPTI82C46X", &opti82c46x_port_ops, 0x0F, + 0 , NULL }, + {"QDI6500", &qdi6500_port_ops, 0x07, + ATA_FLAG_NO_IORDY, qdi_port }, + {"QDI6580", &qdi6580_port_ops, 0x1F, + 0 , qdi_port }, + {"QDI6580DP", &qdi6580dp_port_ops, 0x1F, + 0 , qdi_port }, + {"W83759A", &winbond_port_ops, 0x1F, + 0 , winbond_port } +}; + +/** + * probe_chip_type - Discover controller + * @probe: Probe entry to check + * + * Probe an ATA port and identify the type of controller. We don't + * check if the controller appears to be driveless at this point. + */ + +static __init int probe_chip_type(struct legacy_probe *probe) +{ + int mask = 1 << probe->slot; + + if (winbond && (probe->port == 0x1F0 || probe->port == 0x170)) { + u8 reg = winbond_readcfg(winbond, 0x81); + reg |= 0x80; /* jumpered mode off */ + winbond_writecfg(winbond, 0x81, reg); + reg = winbond_readcfg(winbond, 0x83); + reg |= 0xF0; /* local control */ + winbond_writecfg(winbond, 0x83, reg); + reg = winbond_readcfg(winbond, 0x85); + reg |= 0xF0; /* programmable timing */ + winbond_writecfg(winbond, 0x85, reg); + + reg = winbond_readcfg(winbond, 0x81); + + if (reg & mask) + return W83759A; + } + if (probe->port == 0x1F0) { + unsigned long flags; + local_irq_save(flags); /* Probes */ - inb(0x1F5); outb(inb(0x1F2) | 0x80, 0x1F2); + inb(0x1F5); inb(0x1F2); inb(0x3F6); inb(0x3F6); @@ -760,29 +1168,83 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl if ((inb(0x1F2) & 0x80) == 0) { /* PDC20230c or 20630 ? */ - printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller detected.\n"); - pio_modes = 0x07; - ops = &pdc20230_port_ops; - iordy = ATA_FLAG_NO_IORDY; + printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller" + " detected.\n"); udelay(100); inb(0x1F5); + local_irq_restore(flags); + return PDC20230; } else { outb(0x55, 0x1F2); inb(0x1F2); inb(0x1F2); - if (inb(0x1F2) == 0x00) { - printk(KERN_INFO "PDC20230-B VLB ATA controller detected.\n"); - } + if (inb(0x1F2) == 0x00) + printk(KERN_INFO "PDC20230-B VLB ATA " + "controller detected.\n"); + local_irq_restore(flags); + return BIOS; } local_irq_restore(flags); } + if (ht6560a & mask) + return HT6560A; + if (ht6560b & mask) + return HT6560B; + if (opti82c611a & mask) + return OPTI611A; + if (opti82c46x & mask) + return OPTI46X; + if (autospeed & mask) + return SNOOP; + return BIOS; +} + + +/** + * legacy_init_one - attach a legacy interface + * @pl: probe record + * + * Register an ISA bus IDE interface. Such interfaces are PIO and we + * assume do not support IRQ sharing. + */ + +static __init int legacy_init_one(struct legacy_probe *probe) +{ + struct legacy_controller *controller = &controllers[probe->type]; + int pio_modes = controller->pio_mask; + unsigned long io = probe->port; + u32 mask = (1 << probe->slot); + struct ata_port_operations *ops = controller->ops; + struct legacy_data *ld = &legacy_data[probe->slot]; + struct ata_host *host = NULL; + struct ata_port *ap; + struct platform_device *pdev; + struct ata_device *dev; + void __iomem *io_addr, *ctrl_addr; + u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY; + int ret; - /* Chip does mode setting by command snooping */ - if (ops == &legacy_port_ops && (autospeed & mask)) - ops = &simple_port_ops; + iordy |= controller->flags; + + pdev = platform_device_register_simple(DRV_NAME, probe->slot, NULL, 0); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + ret = -EBUSY; + if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL || + devm_request_region(&pdev->dev, io + 0x0206, 1, + "pata_legacy") == NULL) + goto fail; ret = -ENOMEM; + io_addr = devm_ioport_map(&pdev->dev, io, 8); + ctrl_addr = devm_ioport_map(&pdev->dev, io + 0x0206, 1); + if (!io_addr || !ctrl_addr) + goto fail; + if (controller->setup) + if (controller->setup(pdev, probe, ld) < 0) + goto fail; host = ata_host_alloc(&pdev->dev, 1); if (!host) goto fail; @@ -795,19 +1257,29 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl ap->ioaddr.altstatus_addr = ctrl_addr; ap->ioaddr.ctl_addr = ctrl_addr; ata_std_ports(&ap->ioaddr); - ap->private_data = ld; + ap->host->private_data = ld; - ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, ctrl); + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, io + 0x0206); - ret = ata_host_activate(host, irq, ata_interrupt, 0, &legacy_sht); + ret = ata_host_activate(host, probe->irq, ata_interrupt, 0, + &legacy_sht); if (ret) goto fail; - - legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev); ld->platform_dev = pdev; - return 0; + /* Nothing found means we drop the port as its probably not there */ + + ret = -ENODEV; + ata_link_for_each_dev(dev, &ap->link) { + if (!ata_dev_absent(dev)) { + legacy_host[probe->slot] = host; + ld->platform_dev = pdev; + return 0; + } + } fail: + if (host) + ata_host_detach(host); platform_device_unregister(pdev); return ret; } @@ -818,13 +1290,15 @@ fail: * @master: set this if we find an ATA master * @master: set this if we find an ATA secondary * - * A small number of vendors implemented early PCI ATA interfaces on bridge logic - * without the ATA interface being PCI visible. Where we have a matching PCI driver - * we must skip the relevant device here. If we don't know about it then the legacy - * driver is the right driver anyway. + * A small number of vendors implemented early PCI ATA interfaces + * on bridge logic without the ATA interface being PCI visible. + * Where we have a matching PCI driver we must skip the relevant + * device here. If we don't know about it then the legacy driver + * is the right driver anyway. */ -static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *secondary) +static void __init legacy_check_special_cases(struct pci_dev *p, int *primary, + int *secondary) { /* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */ if (p->vendor == 0x1078 && p->device == 0x0000) { @@ -840,7 +1314,8 @@ static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *sec if (p->vendor == 0x8086 && p->device == 0x1234) { u16 r; pci_read_config_word(p, 0x6C, &r); - if (r & 0x8000) { /* ATA port enabled */ + if (r & 0x8000) { + /* ATA port enabled */ if (r & 0x4000) *secondary = 1; else @@ -850,6 +1325,114 @@ static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *sec } } +static __init void probe_opti_vlb(void) +{ + /* If an OPTI 82C46X is present find out where the channels are */ + static const char *optis[4] = { + "3/463MV", "5MV", + "5MVA", "5MVB" + }; + u8 chans = 1; + u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6; + + opti82c46x = 3; /* Assume master and slave first */ + printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", + optis[ctrl]); + if (ctrl == 3) + chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1; + ctrl = opti_syscfg(0xAC); + /* Check enabled and this port is the 465MV port. On the + MVB we may have two channels */ + if (ctrl & 8) { + if (chans == 2) { + legacy_probe_add(0x1F0, 14, OPTI46X, 0); + legacy_probe_add(0x170, 15, OPTI46X, 0); + } + if (ctrl & 4) + legacy_probe_add(0x170, 15, OPTI46X, 0); + else + legacy_probe_add(0x1F0, 14, OPTI46X, 0); + } else + legacy_probe_add(0x1F0, 14, OPTI46X, 0); +} + +static __init void qdi65_identify_port(u8 r, u8 res, unsigned long port) +{ + static const unsigned long ide_port[2] = { 0x170, 0x1F0 }; + /* Check card type */ + if ((r & 0xF0) == 0xC0) { + /* QD6500: single channel */ + if (r & 8) + /* Disabled ? */ + return; + legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01), + QDI6500, port); + } + if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) { + /* QD6580: dual channel */ + if (!request_region(port + 2 , 2, "pata_qdi")) { + release_region(port, 2); + return; + } + res = inb(port + 3); + /* Single channel mode ? */ + if (res & 1) + legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01), + QDI6580, port); + else { /* Dual channel mode */ + legacy_probe_add(0x1F0, 14, QDI6580DP, port); + /* port + 0x02, r & 0x04 */ + legacy_probe_add(0x170, 15, QDI6580DP, port + 2); + } + release_region(port + 2, 2); + } +} + +static __init void probe_qdi_vlb(void) +{ + unsigned long flags; + static const unsigned long qd_port[2] = { 0x30, 0xB0 }; + int i; + + /* + * Check each possible QD65xx base address + */ + + for (i = 0; i < 2; i++) { + unsigned long port = qd_port[i]; + u8 r, res; + + + if (request_region(port, 2, "pata_qdi")) { + /* Check for a card */ + local_irq_save(flags); + /* I have no h/w that needs this delay but it + is present in the historic code */ + r = inb(port); + udelay(1); + outb(0x19, port); + udelay(1); + res = inb(port); + udelay(1); + outb(r, port); + udelay(1); + local_irq_restore(flags); + + /* Fail */ + if (res == 0x19) { + release_region(port, 2); + continue; + } + /* Passes the presence test */ + r = inb(port + 1); + udelay(1); + /* Check port agrees with port set */ + if ((r & 2) >> 1 == i) + qdi65_identify_port(r, res, port); + release_region(port, 2); + } + } +} /** * legacy_init - attach legacy interfaces @@ -867,15 +1450,17 @@ static __init int legacy_init(void) int ct = 0; int primary = 0; int secondary = 0; - int last_port = NR_HOST; + int pci_present = 0; + struct legacy_probe *pl = &probe_list[0]; + int slot = 0; struct pci_dev *p = NULL; for_each_pci_dev(p) { int r; - /* Check for any overlap of the system ATA mappings. Native mode controllers - stuck on these addresses or some devices in 'raid' mode won't be found by - the storage class test */ + /* Check for any overlap of the system ATA mappings. Native + mode controllers stuck on these addresses or some devices + in 'raid' mode won't be found by the storage class test */ for (r = 0; r < 6; r++) { if (pci_resource_start(p, r) == 0x1f0) primary = 1; @@ -885,49 +1470,39 @@ static __init int legacy_init(void) /* Check for special cases */ legacy_check_special_cases(p, &primary, &secondary); - /* If PCI bus is present then don't probe for tertiary legacy ports */ - if (probe_all == 0) - last_port = 2; + /* If PCI bus is present then don't probe for tertiary + legacy ports */ + pci_present = 1; } - /* If an OPTI 82C46X is present find out where the channels are */ - if (opti82c46x) { - static const char *optis[4] = { - "3/463MV", "5MV", - "5MVA", "5MVB" - }; - u8 chans = 1; - u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6; - - opti82c46x = 3; /* Assume master and slave first */ - printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", optis[ctrl]); - if (ctrl == 3) - chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1; - ctrl = opti_syscfg(0xAC); - /* Check enabled and this port is the 465MV port. On the - MVB we may have two channels */ - if (ctrl & 8) { - if (ctrl & 4) - opti82c46x = 2; /* Slave */ - else - opti82c46x = 1; /* Master */ - if (chans == 2) - opti82c46x = 3; /* Master and Slave */ - } /* Slave only */ - else if (chans == 1) - opti82c46x = 1; + if (winbond == 1) + winbond = 0x130; /* Default port, alt is 1B0 */ + + if (primary == 0 || all) + legacy_probe_add(0x1F0, 14, UNKNOWN, 0); + if (secondary == 0 || all) + legacy_probe_add(0x170, 15, UNKNOWN, 0); + + if (probe_all || !pci_present) { + /* ISA/VLB extra ports */ + legacy_probe_add(0x1E8, 11, UNKNOWN, 0); + legacy_probe_add(0x168, 10, UNKNOWN, 0); + legacy_probe_add(0x1E0, 8, UNKNOWN, 0); + legacy_probe_add(0x160, 12, UNKNOWN, 0); } - for (i = 0; i < last_port; i++) { - /* Skip primary if we have seen a PCI one */ - if (i == 0 && primary == 1) - continue; - /* Skip secondary if we have seen a PCI one */ - if (i == 1 && secondary == 1) + if (opti82c46x) + probe_opti_vlb(); + if (qdi) + probe_qdi_vlb(); + + for (i = 0; i < NR_HOST; i++, pl++) { + if (pl->port == 0) continue; - if (legacy_init_one(i, legacy_port[i], - legacy_port[i] + 0x0206, - legacy_irq[i]) == 0) + if (pl->type == UNKNOWN) + pl->type = probe_chip_type(pl); + pl->slot = slot++; + if (legacy_init_one(pl) == 0) ct++; } if (ct != 0) @@ -941,11 +1516,8 @@ static __exit void legacy_exit(void) for (i = 0; i < nr_legacy_host; i++) { struct legacy_data *ld = &legacy_data[i]; - ata_host_detach(legacy_host[i]); platform_device_unregister(ld->platform_dev); - if (ld->timing) - release_region(ld->timing, 2); } } @@ -960,9 +1532,9 @@ module_param(ht6560a, int, 0); module_param(ht6560b, int, 0); module_param(opti82c611a, int, 0); module_param(opti82c46x, int, 0); +module_param(qdi, int, 0); module_param(pio_mask, int, 0); module_param(iordy_mask, int, 0); module_init(legacy_init); module_exit(legacy_exit); - diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index 50c56e2814c1..dc401626cdb2 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -364,7 +364,7 @@ mpc52xx_ata_probe(struct of_device *op, const struct of_device_id *match) { unsigned int ipb_freq; struct resource res_mem; - int ata_irq = NO_IRQ; + int ata_irq; struct mpc52xx_ata __iomem *ata_regs; struct mpc52xx_ata_priv *priv; int rv; diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c new file mode 100644 index 000000000000..1c1b83541d13 --- /dev/null +++ b/drivers/ata/pata_ninja32.c @@ -0,0 +1,214 @@ +/* + * pata_ninja32.c - Ninja32 PATA for new ATA layer + * (C) 2007 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * Note: The controller like many controllers has shared timings for + * PIO and DMA. We thus flip to the DMA timings in dma_start and flip back + * in the dma_stop function. Thus we actually don't need a set_dmamode + * method as the PIO method is always called and will set the right PIO + * timing parameters. + * + * The Ninja32 Cardbus is not a generic SFF controller. Instead it is + * laid out as follows off BAR 0. This is based upon Mark Lord's delkin + * driver and the extensive analysis done by the BSD developers, notably + * ITOH Yasufumi. + * + * Base + 0x00 IRQ Status + * Base + 0x01 IRQ control + * Base + 0x02 Chipset control + * Base + 0x04 VDMA and reset control + wait bits + * Base + 0x08 BMIMBA + * Base + 0x0C DMA Length + * Base + 0x10 Taskfile + * Base + 0x18 BMDMA Status ? + * Base + 0x1C + * Base + 0x1D Bus master control + * bit 0 = enable + * bit 1 = 0 write/1 read + * bit 2 = 1 sgtable + * bit 3 = go + * bit 4-6 wait bits + * bit 7 = done + * Base + 0x1E AltStatus + * Base + 0x1F timing register + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_ninja32" +#define DRV_VERSION "0.0.1" + + +/** + * ninja32_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. Our timing registers are shared + * but we want to set the PIO timing by default. + */ + +static void ninja32_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static u16 pio_timing[5] = { + 0xd6, 0x85, 0x44, 0x33, 0x13 + }; + iowrite8(pio_timing[adev->pio_mode - XFER_PIO_0], + ap->ioaddr.bmdma_addr + 0x1f); + ap->private_data = adev; +} + + +static void ninja32_dev_select(struct ata_port *ap, unsigned int device) +{ + struct ata_device *adev = &ap->link.device[device]; + if (ap->private_data != adev) { + iowrite8(0xd6, ap->ioaddr.bmdma_addr + 0x1f); + ata_std_dev_select(ap, device); + ninja32_set_piomode(ap, adev); + } +} + +static struct scsi_host_template ninja32_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations ninja32_port_ops = { + .set_piomode = ninja32_set_piomode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ninja32_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .data_xfer = ata_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + + .port_start = ata_sff_port_start, +}; + +static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + struct ata_host *host; + struct ata_port *ap; + void __iomem *base; + int rc; + + host = ata_host_alloc(&dev->dev, 1); + if (!host) + return -ENOMEM; + ap = host->ports[0]; + + /* Set up the PCI device */ + rc = pcim_enable_device(dev); + if (rc) + return rc; + rc = pcim_iomap_regions(dev, 1 << 0, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(dev); + if (rc) + return rc; + + host->iomap = pcim_iomap_table(dev); + rc = pci_set_dma_mask(dev, ATA_DMA_MASK); + if (rc) + return rc; + rc = pci_set_consistent_dma_mask(dev, ATA_DMA_MASK); + if (rc) + return rc; + pci_set_master(dev); + + /* Set up the register mappings */ + base = host->iomap[0]; + if (!base) + return -ENOMEM; + ap->ops = &ninja32_port_ops; + ap->pio_mask = 0x1F; + ap->flags |= ATA_FLAG_SLAVE_POSS; + + ap->ioaddr.cmd_addr = base + 0x10; + ap->ioaddr.ctl_addr = base + 0x1E; + ap->ioaddr.altstatus_addr = base + 0x1E; + ap->ioaddr.bmdma_addr = base; + ata_std_ports(&ap->ioaddr); + + iowrite8(0x05, base + 0x01); /* Enable interrupt lines */ + iowrite8(0xB3, base + 0x02); /* Burst, ?? setup */ + iowrite8(0x00, base + 0x04); /* WAIT0 ? */ + /* FIXME: Should we disable them at remove ? */ + return ata_host_activate(host, dev->irq, ata_interrupt, + IRQF_SHARED, &ninja32_sht); +} + +static const struct pci_device_id ninja32[] = { + { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { }, +}; + +static struct pci_driver ninja32_pci_driver = { + .name = DRV_NAME, + .id_table = ninja32, + .probe = ninja32_init_one, + .remove = ata_pci_remove_one +}; + +static int __init ninja32_init(void) +{ + return pci_register_driver(&ninja32_pci_driver); +} + +static void __exit ninja32_exit(void) +{ + pci_unregister_driver(&ninja32_pci_driver); +} + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Ninja32 ATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ninja32); +MODULE_VERSION(DRV_VERSION); + +module_init(ninja32_init); +module_exit(ninja32_exit); diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index fd36099428a4..3e7f6a9da28b 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -42,7 +42,7 @@ #define DRV_NAME "pata_pcmcia" -#define DRV_VERSION "0.3.2" +#define DRV_VERSION "0.3.3" /* * Private data structure to glue stuff together @@ -86,6 +86,47 @@ static int pcmcia_set_mode(struct ata_link *link, struct ata_device **r_failed_d return ata_do_set_mode(link, r_failed_dev); } +/** + * pcmcia_set_mode_8bit - PCMCIA specific mode setup + * @link: link + * @r_failed_dev: Return pointer for failed device + * + * For the simple emulated 8bit stuff the less we do the better. + */ + +static int pcmcia_set_mode_8bit(struct ata_link *link, + struct ata_device **r_failed_dev) +{ + return 0; +} + +/** + * ata_data_xfer_8bit - Transfer data by 8bit PIO + * @dev: device to target + * @buf: data buffer + * @buflen: buffer length + * @rw: read/write + * + * Transfer data from/to the device data register by 8 bit PIO. + * + * LOCKING: + * Inherited from caller. + */ + +static unsigned int ata_data_xfer_8bit(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw) +{ + struct ata_port *ap = dev->link->ap; + + if (rw == READ) + ioread8_rep(ap->ioaddr.data_addr, buf, buflen); + else + iowrite8_rep(ap->ioaddr.data_addr, buf, buflen); + + return buflen; +} + + static struct scsi_host_template pcmcia_sht = { .module = THIS_MODULE, .name = DRV_NAME, @@ -129,6 +170,31 @@ static struct ata_port_operations pcmcia_port_ops = { .port_start = ata_sff_port_start, }; +static struct ata_port_operations pcmcia_8bit_port_ops = { + .set_mode = pcmcia_set_mode_8bit, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .data_xfer = ata_data_xfer_8bit, + + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + + .port_start = ata_sff_port_start, +}; + #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) @@ -153,9 +219,12 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) cistpl_cftable_entry_t dflt; } *stk = NULL; cistpl_cftable_entry_t *cfg; - int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM; + int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p; unsigned long io_base, ctl_base; void __iomem *io_addr, *ctl_addr; + int n_ports = 1; + + struct ata_port_operations *ops = &pcmcia_port_ops; info = kzalloc(sizeof(*info), GFP_KERNEL); if (info == NULL) @@ -282,27 +351,32 @@ next_entry: /* FIXME: Could be more ports at base + 0x10 but we only deal with one right now */ if (pdev->io.NumPorts1 >= 0x20) - printk(KERN_WARNING DRV_NAME ": second channel not yet supported.\n"); + n_ports = 2; + if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620) + ops = &pcmcia_8bit_port_ops; /* * Having done the PCMCIA plumbing the ATA side is relatively * sane. */ ret = -ENOMEM; - host = ata_host_alloc(&pdev->dev, 1); + host = ata_host_alloc(&pdev->dev, n_ports); if (!host) goto failed; - ap = host->ports[0]; - ap->ops = &pcmcia_port_ops; - ap->pio_mask = 1; /* ISA so PIO 0 cycles */ - ap->flags |= ATA_FLAG_SLAVE_POSS; - ap->ioaddr.cmd_addr = io_addr; - ap->ioaddr.altstatus_addr = ctl_addr; - ap->ioaddr.ctl_addr = ctl_addr; - ata_std_ports(&ap->ioaddr); + for (p = 0; p < n_ports; p++) { + ap = host->ports[p]; - ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base); + ap->ops = ops; + ap->pio_mask = 1; /* ISA so PIO 0 cycles */ + ap->flags |= ATA_FLAG_SLAVE_POSS; + ap->ioaddr.cmd_addr = io_addr + 0x10 * p; + ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p; + ap->ioaddr.ctl_addr = ctl_addr + 0x10 * p; + ata_std_ports(&ap->ioaddr); + + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base); + } /* activate */ ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_interrupt, @@ -360,6 +434,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704), PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904), PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */ + PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */ PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */ PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d), PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */ diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index 2622577521a1..028af5dbeed6 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -348,7 +348,7 @@ static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long ata_id_c_string(pair->id, model_num, ATA_ID_PROD, ATA_ID_PROD_LEN + 1); /* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */ - if (strstr(model_num, "Maxtor") == 0 && pair->dma_mode == XFER_UDMA_6) + if (strstr(model_num, "Maxtor") == NULL && pair->dma_mode == XFER_UDMA_6) mask &= ~ (1 << (6 + ATA_SHIFT_UDMA)); return ata_pci_default_filter(adev, mask); diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index 6c9689b59b06..3ed866723e0c 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -168,8 +168,7 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc) pdc202xx_set_dmamode(ap, qc->dev); /* Cases the state machine will not complete correctly without help */ - if ((tf->flags & ATA_TFLAG_LBA48) || tf->protocol == ATA_PROT_ATAPI_DMA) - { + if ((tf->flags & ATA_TFLAG_LBA48) || tf->protocol == ATAPI_PROT_DMA) { len = qc->nbytes / 2; if (tf->flags & ATA_TFLAG_WRITE) @@ -208,7 +207,7 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc) void __iomem *atapi_reg = master + 0x20 + (4 * ap->port_no); /* Cases the state machine will not complete correctly */ - if (tf->protocol == ATA_PROT_ATAPI_DMA || ( tf->flags & ATA_TFLAG_LBA48)) { + if (tf->protocol == ATAPI_PROT_DMA || (tf->flags & ATA_TFLAG_LBA48)) { iowrite32(0, atapi_reg); iowrite8(ioread8(clock) & ~sel66, clock); } diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index a4c0e502cb42..9f308ed76cc8 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -124,29 +124,33 @@ static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc) return ata_qc_issue_prot(qc); } -static void qdi_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) +static unsigned int qdi_data_xfer(struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) { - struct ata_port *ap = adev->link->ap; - int slop = buflen & 3; + if (ata_id_has_dword_io(dev->id)) { + struct ata_port *ap = dev->link->ap; + int slop = buflen & 3; - if (ata_id_has_dword_io(adev->id)) { - if (write_data) - iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); - else + if (rw == READ) ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); + else + iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { - __le32 pad = 0; - if (write_data) { - memcpy(&pad, buf + buflen - slop, slop); - iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); - } else { + u32 pad; + if (rw == READ) { pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); memcpy(buf + buflen - slop, &pad, slop); + } else { + memcpy(&pad, buf + buflen - slop, slop); + iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); } + buflen += 4 - slop; } } else - ata_data_xfer(adev, buf, buflen, write_data); + buflen = ata_data_xfer(dev, buf, buflen, rw); + + return buflen; } static struct scsi_host_template qdi_sht = { diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index ea2ef9fc15be..55055b27524c 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -768,45 +768,47 @@ static u8 scc_bmdma_status (struct ata_port *ap) /** * scc_data_xfer - Transfer data by PIO - * @adev: device for this I/O + * @dev: device for this I/O * @buf: data buffer * @buflen: buffer length - * @write_data: read/write + * @rw: read/write * * Note: Original code is ata_data_xfer(). */ -static void scc_data_xfer (struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) +static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) { - struct ata_port *ap = adev->link->ap; + struct ata_port *ap = dev->link->ap; unsigned int words = buflen >> 1; unsigned int i; u16 *buf16 = (u16 *) buf; void __iomem *mmio = ap->ioaddr.data_addr; /* Transfer multiple of 2 bytes */ - if (write_data) { - for (i = 0; i < words; i++) - out_be32(mmio, cpu_to_le16(buf16[i])); - } else { + if (rw == READ) for (i = 0; i < words; i++) buf16[i] = le16_to_cpu(in_be32(mmio)); - } + else + for (i = 0; i < words; i++) + out_be32(mmio, cpu_to_le16(buf16[i])); /* Transfer trailing 1 byte, if any. */ if (unlikely(buflen & 0x01)) { u16 align_buf[1] = { 0 }; unsigned char *trailing_buf = buf + buflen - 1; - if (write_data) { - memcpy(align_buf, trailing_buf, 1); - out_be32(mmio, cpu_to_le16(align_buf[0])); - } else { + if (rw == READ) { align_buf[0] = le16_to_cpu(in_be32(mmio)); memcpy(trailing_buf, align_buf, 1); + } else { + memcpy(align_buf, trailing_buf, 1); + out_be32(mmio, cpu_to_le16(align_buf[0])); } + words++; } + + return words << 1; } /** diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 8bed88873720..9c523fbf529e 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -41,7 +41,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_serverworks" -#define DRV_VERSION "0.4.2" +#define DRV_VERSION "0.4.3" #define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */ #define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */ @@ -102,7 +102,7 @@ static int osb4_cable(struct ata_port *ap) { } /** - * csb4_cable - CSB5/6 cable detect + * csb_cable - CSB5/6 cable detect * @ap: ATA port to check * * Serverworks default arrangement is to use the drive side detection @@ -110,7 +110,7 @@ static int osb4_cable(struct ata_port *ap) { */ static int csb_cable(struct ata_port *ap) { - return ATA_CBL_PATA80; + return ATA_CBL_PATA_UNK; } struct sv_cable_table { @@ -231,7 +231,6 @@ static unsigned long serverworks_csb_filter(struct ata_device *adev, unsigned lo return ata_pci_default_filter(adev, mask); } - /** * serverworks_set_piomode - set initial PIO mode data * @ap: ATA interface @@ -243,7 +242,7 @@ static unsigned long serverworks_csb_filter(struct ata_device *adev, unsigned lo static void serverworks_set_piomode(struct ata_port *ap, struct ata_device *adev) { static const u8 pio_mode[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 }; - int offset = 1 + (2 * ap->port_no) - adev->devno; + int offset = 1 + 2 * ap->port_no - adev->devno; int devbits = (2 * ap->port_no + adev->devno) * 4; u16 csb5_pio; struct pci_dev *pdev = to_pci_dev(ap->host->dev); diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 453d72bf2598..39627ab684bf 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -185,7 +185,8 @@ static int via_cable_detect(struct ata_port *ap) { if (ata66 & (0x10100000 >> (16 * ap->port_no))) return ATA_CBL_PATA80; /* Check with ACPI so we can spot BIOS reported SATA bridges */ - if (ata_acpi_cbl_80wire(ap)) + if (ata_acpi_init_gtm(ap) && + ata_acpi_cbl_80wire(ap, ata_acpi_init_gtm(ap))) return ATA_CBL_PATA80; return ATA_CBL_PATA40; } diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c index 7116a9e7a8b2..99c92eda217b 100644 --- a/drivers/ata/pata_winbond.c +++ b/drivers/ata/pata_winbond.c @@ -92,29 +92,33 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev) } -static void winbond_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) +static unsigned int winbond_data_xfer(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw) { - struct ata_port *ap = adev->link->ap; + struct ata_port *ap = dev->link->ap; int slop = buflen & 3; - if (ata_id_has_dword_io(adev->id)) { - if (write_data) - iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); - else + if (ata_id_has_dword_io(dev->id)) { + if (rw == READ) ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); + else + iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { - __le32 pad = 0; - if (write_data) { - memcpy(&pad, buf + buflen - slop, slop); - iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); - } else { + u32 pad; + if (rw == READ) { pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); memcpy(buf + buflen - slop, &pad, slop); + } else { + memcpy(&pad, buf + buflen - slop, slop); + iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); } + buflen += 4 - slop; } } else - ata_data_xfer(adev, buf, buflen, write_data); + buflen = ata_data_xfer(dev, buf, buflen, rw); + + return buflen; } static struct scsi_host_template winbond_sht = { @@ -191,7 +195,7 @@ static __init int winbond_init_one(unsigned long port) reg = winbond_readcfg(port, 0x81); if (!(reg & 0x03)) /* Disabled */ - return 0; + return -ENODEV; for (i = 0; i < 2 ; i ++) { unsigned long cmd_port = 0x1F0 - (0x80 * i); diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index bd4c2a3c88d7..8e1b7e9c0ae4 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -321,8 +321,9 @@ static int adma_fill_sg(struct ata_queued_cmd *qc) u8 *buf = pp->pkt, *last_buf = NULL; int i = (2 + buf[3]) * 8; u8 pFLAGS = pORD | ((qc->tf.flags & ATA_TFLAG_WRITE) ? pDIRO : 0); + unsigned int si; - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { u32 addr; u32 len; @@ -455,7 +456,7 @@ static unsigned int adma_qc_issue(struct ata_queued_cmd *qc) adma_packet_start(qc); return 0; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: BUG(); break; diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index d015b4adcfe0..922d7b2efba8 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -333,13 +333,14 @@ static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc, struct prde *prd_ptr_to_indirect_ext = NULL; unsigned indirect_ext_segment_sz = 0; dma_addr_t indirect_ext_segment_paddr; + unsigned int si; VPRINTK("SATA FSL : cd = 0x%x, prd = 0x%x\n", cmd_desc, prd); indirect_ext_segment_paddr = cmd_desc_paddr + SATA_FSL_CMD_DESC_OFFSET_TO_PRDT + SATA_FSL_MAX_PRD_DIRECT * 16; - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { dma_addr_t sg_addr = sg_dma_address(sg); u32 sg_len = sg_dma_len(sg); @@ -417,7 +418,7 @@ static void sata_fsl_qc_prep(struct ata_queued_cmd *qc) } /* setup "ACMD - atapi command" in cmd. desc. if this is ATAPI cmd */ - if (is_atapi_taskfile(&qc->tf)) { + if (ata_is_atapi(qc->tf.protocol)) { desc_info |= ATAPI_CMD; memset((void *)&cd->acmd, 0, 32); memcpy((void *)&cd->acmd, qc->cdb, qc->dev->cdb_len); diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index 323c087e8cc1..96e614a1c169 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -585,7 +585,7 @@ static struct ata_port_operations inic_port_ops = { }; static struct ata_port_info inic_port_info = { - /* For some reason, ATA_PROT_ATAPI is broken on this + /* For some reason, ATAPI_PROT_PIO is broken on this * controller, and no, PIO_POLLING does't fix it. It somehow * manages to report the wrong ireason and ignoring ireason * results in machine lock up. Tell libata to always prefer diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 37b850ae0845..7e72463a90eb 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1136,9 +1136,10 @@ static void mv_fill_sg(struct ata_queued_cmd *qc) struct mv_port_priv *pp = qc->ap->private_data; struct scatterlist *sg; struct mv_sg *mv_sg, *last_sg = NULL; + unsigned int si; mv_sg = pp->sg_tbl; - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { dma_addr_t addr = sg_dma_address(sg); u32 sg_len = sg_dma_len(sg); diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index ed5dc7cb50cd..a0f98fdab7a0 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -1336,21 +1336,18 @@ static void nv_adma_fill_aprd(struct ata_queued_cmd *qc, static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb) { struct nv_adma_port_priv *pp = qc->ap->private_data; - unsigned int idx; struct nv_adma_prd *aprd; struct scatterlist *sg; + unsigned int si; VPRINTK("ENTER\n"); - idx = 0; - - ata_for_each_sg(sg, qc) { - aprd = (idx < 5) ? &cpb->aprd[idx] : - &pp->aprd[NV_ADMA_SGTBL_LEN * qc->tag + (idx-5)]; - nv_adma_fill_aprd(qc, sg, idx, aprd); - idx++; + for_each_sg(qc->sg, sg, qc->n_elem, si) { + aprd = (si < 5) ? &cpb->aprd[si] : + &pp->aprd[NV_ADMA_SGTBL_LEN * qc->tag + (si-5)]; + nv_adma_fill_aprd(qc, sg, si, aprd); } - if (idx > 5) + if (si > 5) cpb->next_aprd = cpu_to_le64(((u64)(pp->aprd_dma + NV_ADMA_SGTBL_SZ * qc->tag))); else cpb->next_aprd = cpu_to_le64(0); @@ -1995,17 +1992,14 @@ static void nv_swncq_fill_sg(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct scatterlist *sg; - unsigned int idx; struct nv_swncq_port_priv *pp = ap->private_data; struct ata_prd *prd; - - WARN_ON(qc->__sg == NULL); - WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); + unsigned int si, idx; prd = pp->prd + ATA_MAX_PRD * qc->tag; idx = 0; - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { u32 addr, offset; u32 sg_len, len; @@ -2027,8 +2021,7 @@ static void nv_swncq_fill_sg(struct ata_queued_cmd *qc) } } - if (idx) - prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); + prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); } static unsigned int nv_swncq_issue_atacmd(struct ata_port *ap, diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index 7914def54fa3..a07d319f6e8c 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -450,19 +450,19 @@ static void pdc_atapi_pkt(struct ata_queued_cmd *qc) struct pdc_port_priv *pp = ap->private_data; u8 *buf = pp->pkt; u32 *buf32 = (u32 *) buf; - unsigned int dev_sel, feature, nbytes; + unsigned int dev_sel, feature; /* set control bits (byte 0), zero delay seq id (byte 3), * and seq id (byte 2) */ switch (qc->tf.protocol) { - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: if (!(qc->tf.flags & ATA_TFLAG_WRITE)) buf32[0] = cpu_to_le32(PDC_PKT_READ); else buf32[0] = 0; break; - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_NODATA: buf32[0] = cpu_to_le32(PDC_PKT_NODATA); break; default: @@ -473,45 +473,37 @@ static void pdc_atapi_pkt(struct ata_queued_cmd *qc) buf32[2] = 0; /* no next-packet */ /* select drive */ - if (sata_scr_valid(&ap->link)) { + if (sata_scr_valid(&ap->link)) dev_sel = PDC_DEVICE_SATA; - } else { - dev_sel = ATA_DEVICE_OBS; - if (qc->dev->devno != 0) - dev_sel |= ATA_DEV1; - } + else + dev_sel = qc->tf.device; + buf[12] = (1 << 5) | ATA_REG_DEVICE; buf[13] = dev_sel; buf[14] = (1 << 5) | ATA_REG_DEVICE | PDC_PKT_CLEAR_BSY; buf[15] = dev_sel; /* once more, waiting for BSY to clear */ buf[16] = (1 << 5) | ATA_REG_NSECT; - buf[17] = 0x00; + buf[17] = qc->tf.nsect; buf[18] = (1 << 5) | ATA_REG_LBAL; - buf[19] = 0x00; + buf[19] = qc->tf.lbal; /* set feature and byte counter registers */ - if (qc->tf.protocol != ATA_PROT_ATAPI_DMA) { + if (qc->tf.protocol != ATAPI_PROT_DMA) feature = PDC_FEATURE_ATAPI_PIO; - /* set byte counter register to real transfer byte count */ - nbytes = qc->nbytes; - if (nbytes > 0xffff) - nbytes = 0xffff; - } else { + else feature = PDC_FEATURE_ATAPI_DMA; - /* set byte counter register to 0 */ - nbytes = 0; - } + buf[20] = (1 << 5) | ATA_REG_FEATURE; buf[21] = feature; buf[22] = (1 << 5) | ATA_REG_BYTEL; - buf[23] = nbytes & 0xFF; + buf[23] = qc->tf.lbam; buf[24] = (1 << 5) | ATA_REG_BYTEH; - buf[25] = (nbytes >> 8) & 0xFF; + buf[25] = qc->tf.lbah; /* send ATAPI packet command 0xA0 */ buf[26] = (1 << 5) | ATA_REG_CMD; - buf[27] = ATA_CMD_PACKET; + buf[27] = qc->tf.command; /* select drive and check DRQ */ buf[28] = (1 << 5) | ATA_REG_DEVICE | PDC_PKT_WAIT_DRDY; @@ -541,17 +533,15 @@ static void pdc_fill_sg(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct scatterlist *sg; - unsigned int idx; const u32 SG_COUNT_ASIC_BUG = 41*4; + unsigned int si, idx; + u32 len; if (!(qc->flags & ATA_QCFLAG_DMAMAP)) return; - WARN_ON(qc->__sg == NULL); - WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); - idx = 0; - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { u32 addr, offset; u32 sg_len, len; @@ -578,29 +568,27 @@ static void pdc_fill_sg(struct ata_queued_cmd *qc) } } - if (idx) { - u32 len = le32_to_cpu(ap->prd[idx - 1].flags_len); + len = le32_to_cpu(ap->prd[idx - 1].flags_len); - if (len > SG_COUNT_ASIC_BUG) { - u32 addr; + if (len > SG_COUNT_ASIC_BUG) { + u32 addr; - VPRINTK("Splitting last PRD.\n"); + VPRINTK("Splitting last PRD.\n"); - addr = le32_to_cpu(ap->prd[idx - 1].addr); - ap->prd[idx - 1].flags_len = cpu_to_le32(len - SG_COUNT_ASIC_BUG); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx - 1, addr, SG_COUNT_ASIC_BUG); + addr = le32_to_cpu(ap->prd[idx - 1].addr); + ap->prd[idx - 1].flags_len = cpu_to_le32(len - SG_COUNT_ASIC_BUG); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx - 1, addr, SG_COUNT_ASIC_BUG); - addr = addr + len - SG_COUNT_ASIC_BUG; - len = SG_COUNT_ASIC_BUG; - ap->prd[idx].addr = cpu_to_le32(addr); - ap->prd[idx].flags_len = cpu_to_le32(len); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); + addr = addr + len - SG_COUNT_ASIC_BUG; + len = SG_COUNT_ASIC_BUG; + ap->prd[idx].addr = cpu_to_le32(addr); + ap->prd[idx].flags_len = cpu_to_le32(len); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); - idx++; - } - - ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); + idx++; } + + ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); } static void pdc_qc_prep(struct ata_queued_cmd *qc) @@ -627,14 +615,14 @@ static void pdc_qc_prep(struct ata_queued_cmd *qc) pdc_pkt_footer(&qc->tf, pp->pkt, i); break; - case ATA_PROT_ATAPI: + case ATAPI_PROT_PIO: pdc_fill_sg(qc); break; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: pdc_fill_sg(qc); /*FALLTHROUGH*/ - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_NODATA: pdc_atapi_pkt(qc); break; @@ -754,8 +742,8 @@ static inline unsigned int pdc_host_intr(struct ata_port *ap, switch (qc->tf.protocol) { case ATA_PROT_DMA: case ATA_PROT_NODATA: - case ATA_PROT_ATAPI_DMA: - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_DMA: + case ATAPI_PROT_NODATA: qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); ata_qc_complete(qc); handled = 1; @@ -900,7 +888,7 @@ static inline void pdc_packet_start(struct ata_queued_cmd *qc) static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc) { switch (qc->tf.protocol) { - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_NODATA: if (qc->dev->flags & ATA_DFLAG_CDB_INTR) break; /*FALLTHROUGH*/ @@ -908,7 +896,7 @@ static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc) if (qc->tf.flags & ATA_TFLAG_POLLING) break; /*FALLTHROUGH*/ - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: case ATA_PROT_DMA: pdc_packet_start(qc); return 0; @@ -922,16 +910,14 @@ static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc) static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { - WARN_ON(tf->protocol == ATA_PROT_DMA || - tf->protocol == ATA_PROT_ATAPI_DMA); + WARN_ON(tf->protocol == ATA_PROT_DMA || tf->protocol == ATAPI_PROT_DMA); ata_tf_load(ap, tf); } static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { - WARN_ON(tf->protocol == ATA_PROT_DMA || - tf->protocol == ATA_PROT_ATAPI_DMA); + WARN_ON(tf->protocol == ATA_PROT_DMA || tf->protocol == ATAPI_PROT_DMA); ata_exec_command(ap, tf); } diff --git a/drivers/ata/sata_promise.h b/drivers/ata/sata_promise.h index 6ee5e190262d..00d6000e546f 100644 --- a/drivers/ata/sata_promise.h +++ b/drivers/ata/sata_promise.h @@ -46,7 +46,7 @@ static inline unsigned int pdc_pkt_header(struct ata_taskfile *tf, unsigned int devno, u8 *buf) { u8 dev_reg; - u32 *buf32 = (u32 *) buf; + __le32 *buf32 = (__le32 *) buf; /* set control bits (byte 0), zero delay seq id (byte 3), * and seq id (byte 2) diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c index c68b241805fd..91cc12c82040 100644 --- a/drivers/ata/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -287,14 +287,10 @@ static unsigned int qs_fill_sg(struct ata_queued_cmd *qc) struct scatterlist *sg; struct ata_port *ap = qc->ap; struct qs_port_priv *pp = ap->private_data; - unsigned int nelem; u8 *prd = pp->pkt + QS_CPB_BYTES; + unsigned int si; - WARN_ON(qc->__sg == NULL); - WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); - - nelem = 0; - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { u64 addr; u32 len; @@ -306,12 +302,11 @@ static unsigned int qs_fill_sg(struct ata_queued_cmd *qc) *(__le32 *)prd = cpu_to_le32(len); prd += sizeof(u64); - VPRINTK("PRD[%u] = (0x%llX, 0x%X)\n", nelem, + VPRINTK("PRD[%u] = (0x%llX, 0x%X)\n", si, (unsigned long long)addr, len); - nelem++; } - return nelem; + return si; } static void qs_qc_prep(struct ata_queued_cmd *qc) @@ -376,7 +371,7 @@ static unsigned int qs_qc_issue(struct ata_queued_cmd *qc) qs_packet_start(qc); return 0; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: BUG(); break; diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index f5119bf40c24..0b8191b52f97 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -416,15 +416,14 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2) */ /* Check the ATA_DFLAG_CDB_INTR flag is enough here. - * The flag was turned on only for atapi devices. - * No need to check is_atapi_taskfile(&qc->tf) again. + * The flag was turned on only for atapi devices. No + * need to check ata_is_atapi(qc->tf.protocol) again. */ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) goto err_hsm; break; case HSM_ST_LAST: - if (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA) { + if (ata_is_dma(qc->tf.protocol)) { /* clear DMA-Start bit */ ap->ops->bmdma_stop(qc); @@ -451,8 +450,7 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2) /* kick HSM in the ass */ ata_hsm_move(ap, qc, status, 0); - if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA)) + if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol)) ata_ehi_push_desc(ehi, "BMDMA2 stat 0x%x", bmdma2); return; diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 864c1c1b8511..b4b1f91ea693 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -813,8 +813,9 @@ static inline void sil24_fill_sg(struct ata_queued_cmd *qc, { struct scatterlist *sg; struct sil24_sge *last_sge = NULL; + unsigned int si; - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { sge->addr = cpu_to_le64(sg_dma_address(sg)); sge->cnt = cpu_to_le32(sg_dma_len(sg)); sge->flags = 0; @@ -823,8 +824,7 @@ static inline void sil24_fill_sg(struct ata_queued_cmd *qc, sge++; } - if (likely(last_sge)) - last_sge->flags = cpu_to_le32(SGE_TRM); + last_sge->flags = cpu_to_le32(SGE_TRM); } static int sil24_qc_defer(struct ata_queued_cmd *qc) @@ -852,9 +852,7 @@ static int sil24_qc_defer(struct ata_queued_cmd *qc) * set. * */ - int is_excl = (prot == ATA_PROT_ATAPI || - prot == ATA_PROT_ATAPI_NODATA || - prot == ATA_PROT_ATAPI_DMA || + int is_excl = (ata_is_atapi(prot) || (qc->flags & ATA_QCFLAG_RESULT_TF)); if (unlikely(ap->excl_link)) { @@ -885,35 +883,21 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) cb = &pp->cmd_block[sil24_tag(qc->tag)]; - switch (qc->tf.protocol) { - case ATA_PROT_PIO: - case ATA_PROT_DMA: - case ATA_PROT_NCQ: - case ATA_PROT_NODATA: + if (!ata_is_atapi(qc->tf.protocol)) { prb = &cb->ata.prb; sge = cb->ata.sge; - break; - - case ATA_PROT_ATAPI: - case ATA_PROT_ATAPI_DMA: - case ATA_PROT_ATAPI_NODATA: + } else { prb = &cb->atapi.prb; sge = cb->atapi.sge; memset(cb->atapi.cdb, 0, 32); memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len); - if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) { + if (ata_is_data(qc->tf.protocol)) { if (qc->tf.flags & ATA_TFLAG_WRITE) ctrl = PRB_CTRL_PACKET_WRITE; else ctrl = PRB_CTRL_PACKET_READ; } - break; - - default: - prb = NULL; /* shut up, gcc */ - sge = NULL; - BUG(); } prb->ctrl = cpu_to_le16(ctrl); diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 4d857185f33b..e3d56bc6726d 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -334,7 +334,7 @@ static inline void pdc20621_ata_sg(struct ata_taskfile *tf, u8 *buf, { u32 addr; unsigned int dw = PDC_DIMM_APKT_PRD >> 2; - u32 *buf32 = (u32 *) buf; + __le32 *buf32 = (__le32 *) buf; /* output ATA packet S/G table */ addr = PDC_20621_DIMM_BASE + PDC_20621_DIMM_DATA + @@ -356,7 +356,7 @@ static inline void pdc20621_host_sg(struct ata_taskfile *tf, u8 *buf, { u32 addr; unsigned int dw = PDC_DIMM_HPKT_PRD >> 2; - u32 *buf32 = (u32 *) buf; + __le32 *buf32 = (__le32 *) buf; /* output Host DMA packet S/G table */ addr = PDC_20621_DIMM_BASE + PDC_20621_DIMM_DATA + @@ -377,7 +377,7 @@ static inline unsigned int pdc20621_ata_pkt(struct ata_taskfile *tf, unsigned int portno) { unsigned int i, dw; - u32 *buf32 = (u32 *) buf; + __le32 *buf32 = (__le32 *) buf; u8 dev_reg; unsigned int dimm_sg = PDC_20621_DIMM_BASE + @@ -429,7 +429,8 @@ static inline void pdc20621_host_pkt(struct ata_taskfile *tf, u8 *buf, unsigned int portno) { unsigned int dw; - u32 tmp, *buf32 = (u32 *) buf; + u32 tmp; + __le32 *buf32 = (__le32 *) buf; unsigned int host_sg = PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * portno) + @@ -473,7 +474,7 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc) void __iomem *mmio = ap->host->iomap[PDC_MMIO_BAR]; void __iomem *dimm_mmio = ap->host->iomap[PDC_DIMM_BAR]; unsigned int portno = ap->port_no; - unsigned int i, idx, total_len = 0, sgt_len; + unsigned int i, si, idx, total_len = 0, sgt_len; u32 *buf = (u32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ]; WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); @@ -487,7 +488,7 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc) * Build S/G table */ idx = 0; - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { buf[idx++] = cpu_to_le32(sg_dma_address(sg)); buf[idx++] = cpu_to_le32(sg_dma_len(sg)); total_len += sg_dma_len(sg); @@ -700,7 +701,7 @@ static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc) pdc20621_packet_start(qc); return 0; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: BUG(); break; diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 0841df01bc19..aa0df0a4b22a 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -5142,6 +5142,7 @@ static void ipr_build_ata_ioadl(struct ipr_cmnd *ipr_cmd, struct ipr_ioadl_desc *last_ioadl = NULL; int len = qc->nbytes + qc->pad_len; struct scatterlist *sg; + unsigned int si; if (len == 0) return; @@ -5159,7 +5160,7 @@ static void ipr_build_ata_ioadl(struct ipr_cmnd *ipr_cmd, cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg); } - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { ioadl->flags_and_data_len = cpu_to_be32(ioadl_flags | sg_dma_len(sg)); ioadl->address = cpu_to_be32(sg_dma_address(sg)); @@ -5222,12 +5223,12 @@ static unsigned int ipr_qc_issue(struct ata_queued_cmd *qc) regs->flags |= IPR_ATA_FLAG_XFER_TYPE_DMA; break; - case ATA_PROT_ATAPI: - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_PIO: + case ATAPI_PROT_NODATA: regs->flags |= IPR_ATA_FLAG_PACKET_CMD; break; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: regs->flags |= IPR_ATA_FLAG_PACKET_CMD; regs->flags |= IPR_ATA_FLAG_XFER_TYPE_DMA; break; diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 0829b55c64d2..827cfb132f21 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -158,8 +158,8 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) struct Scsi_Host *host = sas_ha->core.shost; struct sas_internal *i = to_sas_internal(host->transportt); struct scatterlist *sg; - unsigned int num = 0; unsigned int xfer = 0; + unsigned int si; task = sas_alloc_task(GFP_ATOMIC); if (!task) @@ -176,22 +176,20 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) ata_tf_to_fis(&qc->tf, 1, 0, (u8*)&task->ata_task.fis); task->uldd_task = qc; - if (is_atapi_taskfile(&qc->tf)) { + if (ata_is_atapi(qc->tf.protocol)) { memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len); task->total_xfer_len = qc->nbytes + qc->pad_len; task->num_scatter = qc->pad_len ? qc->n_elem + 1 : qc->n_elem; } else { - ata_for_each_sg(sg, qc) { - num++; + for_each_sg(qc->sg, sg, qc->n_elem, si) xfer += sg->length; - } task->total_xfer_len = xfer; - task->num_scatter = num; + task->num_scatter = si; } task->data_dir = qc->dma_dir; - task->scatter = qc->__sg; + task->scatter = qc->sg; task->ata_task.retry_count = 1; task->task_state_flags = SAS_TASK_STATE_PENDING; qc->lldd_task = task; @@ -200,7 +198,7 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) case ATA_PROT_NCQ: task->ata_task.use_ncq = 1; /* fall through */ - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: case ATA_PROT_DMA: task->ata_task.dma_xfer = 1; break; diff --git a/include/linux/ata.h b/include/linux/ata.h index e672e80202a8..78bbacaed8c4 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -286,9 +286,10 @@ enum { ATA_CBL_NONE = 0, ATA_CBL_PATA40 = 1, ATA_CBL_PATA80 = 2, - ATA_CBL_PATA40_SHORT = 3, /* 40 wire cable to high UDMA spec */ - ATA_CBL_PATA_UNK = 4, - ATA_CBL_SATA = 5, + ATA_CBL_PATA40_SHORT = 3, /* 40 wire cable to high UDMA spec */ + ATA_CBL_PATA_UNK = 4, /* don't know, maybe 80c? */ + ATA_CBL_PATA_IGN = 5, /* don't know, ignore cable handling */ + ATA_CBL_SATA = 6, /* SATA Status and Control Registers */ SCR_STATUS = 0, @@ -324,6 +325,13 @@ enum { ATA_TFLAG_LBA = (1 << 4), /* enable LBA */ ATA_TFLAG_FUA = (1 << 5), /* enable FUA */ ATA_TFLAG_POLLING = (1 << 6), /* set nIEN to 1 and use polling */ + + /* protocol flags */ + ATA_PROT_FLAG_PIO = (1 << 0), /* is PIO */ + ATA_PROT_FLAG_DMA = (1 << 1), /* is DMA */ + ATA_PROT_FLAG_DATA = ATA_PROT_FLAG_PIO | ATA_PROT_FLAG_DMA, + ATA_PROT_FLAG_NCQ = (1 << 2), /* is NCQ */ + ATA_PROT_FLAG_ATAPI = (1 << 3), /* is ATAPI */ }; enum ata_tf_protocols { @@ -333,9 +341,9 @@ enum ata_tf_protocols { ATA_PROT_PIO, /* PIO data xfer */ ATA_PROT_DMA, /* DMA */ ATA_PROT_NCQ, /* NCQ */ - ATA_PROT_ATAPI, /* packet command, PIO data xfer*/ - ATA_PROT_ATAPI_NODATA, /* packet command, no data */ - ATA_PROT_ATAPI_DMA, /* packet command with special DMA sauce */ + ATAPI_PROT_NODATA, /* packet command, no data */ + ATAPI_PROT_PIO, /* packet command, PIO data xfer*/ + ATAPI_PROT_DMA, /* packet command with special DMA sauce */ }; enum ata_ioctls { @@ -346,8 +354,8 @@ enum ata_ioctls { /* core structures */ struct ata_prd { - u32 addr; - u32 flags_len; + __le32 addr; + __le32 flags_len; }; struct ata_taskfile { @@ -373,13 +381,69 @@ struct ata_taskfile { u8 command; /* IO operation */ }; +/* + * protocol tests + */ +static inline unsigned int ata_prot_flags(u8 prot) +{ + switch (prot) { + case ATA_PROT_NODATA: + return 0; + case ATA_PROT_PIO: + return ATA_PROT_FLAG_PIO; + case ATA_PROT_DMA: + return ATA_PROT_FLAG_DMA; + case ATA_PROT_NCQ: + return ATA_PROT_FLAG_DMA | ATA_PROT_FLAG_NCQ; + case ATAPI_PROT_NODATA: + return ATA_PROT_FLAG_ATAPI; + case ATAPI_PROT_PIO: + return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_PIO; + case ATAPI_PROT_DMA: + return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_DMA; + } + return 0; +} + +static inline int ata_is_atapi(u8 prot) +{ + return ata_prot_flags(prot) & ATA_PROT_FLAG_ATAPI; +} + +static inline int ata_is_nodata(u8 prot) +{ + return !(ata_prot_flags(prot) & ATA_PROT_FLAG_DATA); +} + +static inline int ata_is_pio(u8 prot) +{ + return ata_prot_flags(prot) & ATA_PROT_FLAG_PIO; +} + +static inline int ata_is_dma(u8 prot) +{ + return ata_prot_flags(prot) & ATA_PROT_FLAG_DMA; +} + +static inline int ata_is_ncq(u8 prot) +{ + return ata_prot_flags(prot) & ATA_PROT_FLAG_NCQ; +} + +static inline int ata_is_data(u8 prot) +{ + return ata_prot_flags(prot) & ATA_PROT_FLAG_DATA; +} + +/* + * id tests + */ #define ata_id_is_ata(id) (((id)[0] & (1 << 15)) == 0) #define ata_id_has_lba(id) ((id)[49] & (1 << 9)) #define ata_id_has_dma(id) ((id)[49] & (1 << 8)) #define ata_id_has_ncq(id) ((id)[76] & (1 << 8)) #define ata_id_queue_depth(id) (((id)[75] & 0x1f) + 1) #define ata_id_removeable(id) ((id)[0] & (1 << 7)) -#define ata_id_has_dword_io(id) ((id)[48] & (1 << 0)) #define ata_id_has_atapi_AN(id) \ ( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \ ((id)[78] & (1 << 5)) ) @@ -415,6 +479,7 @@ static inline bool ata_id_has_dipm(const u16 *id) return val & (1 << 3); } + static inline int ata_id_has_fua(const u16 *id) { if ((id[84] & 0xC000) != 0x4000) @@ -519,6 +584,26 @@ static inline int ata_id_is_sata(const u16 *id) return ata_id_major_version(id) >= 5 && id[93] == 0; } +static inline int ata_id_has_tpm(const u16 *id) +{ + /* The TPM bits are only valid on ATA8 */ + if (ata_id_major_version(id) < 8) + return 0; + if ((id[48] & 0xC000) != 0x4000) + return 0; + return id[48] & (1 << 0); +} + +static inline int ata_id_has_dword_io(const u16 *id) +{ + /* ATA 8 reuses this flag for "trusted" computing */ + if (ata_id_major_version(id) > 7) + return 0; + if (id[48] & (1 << 0)) + return 1; + return 0; +} + static inline int ata_id_current_chs_valid(const u16 *id) { /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command @@ -574,13 +659,6 @@ static inline int atapi_command_packet_set(const u16 *dev_id) return (dev_id[0] >> 8) & 0x1f; } -static inline int is_atapi_taskfile(const struct ata_taskfile *tf) -{ - return (tf->protocol == ATA_PROT_ATAPI) || - (tf->protocol == ATA_PROT_ATAPI_NODATA) || - (tf->protocol == ATA_PROT_ATAPI_DMA); -} - static inline int is_multi_taskfile(struct ata_taskfile *tf) { return (tf->command == ATA_CMD_READ_MULTI) || diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h index c6d3e22c0624..fcdc11b9609b 100644 --- a/include/linux/cdrom.h +++ b/include/linux/cdrom.h @@ -451,6 +451,7 @@ struct cdrom_generic_command #define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e #define GPCMD_READ_10 0x28 #define GPCMD_READ_12 0xa8 +#define GPCMD_READ_BUFFER 0x3c #define GPCMD_READ_BUFFER_CAPACITY 0x5c #define GPCMD_READ_CDVD_CAPACITY 0x25 #define GPCMD_READ_CD 0xbe @@ -480,7 +481,9 @@ struct cdrom_generic_command #define GPCMD_TEST_UNIT_READY 0x00 #define GPCMD_VERIFY_10 0x2f #define GPCMD_WRITE_10 0x2a +#define GPCMD_WRITE_12 0xaa #define GPCMD_WRITE_AND_VERIFY_10 0x2e +#define GPCMD_WRITE_BUFFER 0x3b /* This is listed as optional in ATAPI 2.6, but is (curiously) * missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji * Table 377 as an MMC command for SCSi devices though... Most ATAPI diff --git a/include/linux/libata.h b/include/linux/libata.h index 124033cb5e9b..4374c4277780 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -35,6 +35,7 @@ #include <linux/workqueue.h> #include <scsi/scsi_host.h> #include <linux/acpi.h> +#include <linux/cdrom.h> /* * Define if arch has non-standard setup. This is a _PCI_ standard @@ -143,10 +144,11 @@ enum { ATA_DFLAG_NCQ_OFF = (1 << 13), /* device limited to non-NCQ mode */ ATA_DFLAG_SPUNDOWN = (1 << 14), /* XXX: for spindown_compat */ ATA_DFLAG_SLEEPING = (1 << 15), /* device is sleeping */ - ATA_DFLAG_INIT_MASK = (1 << 16) - 1, + ATA_DFLAG_DUBIOUS_XFER = (1 << 16), /* data transfer not verified */ + ATA_DFLAG_INIT_MASK = (1 << 24) - 1, - ATA_DFLAG_DETACH = (1 << 16), - ATA_DFLAG_DETACHED = (1 << 17), + ATA_DFLAG_DETACH = (1 << 24), + ATA_DFLAG_DETACHED = (1 << 25), ATA_DEV_UNKNOWN = 0, /* unknown device */ ATA_DEV_ATA = 1, /* ATA device */ @@ -217,9 +219,7 @@ enum { /* struct ata_queued_cmd flags */ ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */ - ATA_QCFLAG_SG = (1 << 1), /* have s/g table? */ - ATA_QCFLAG_SINGLE = (1 << 2), /* no s/g, just a single buffer */ - ATA_QCFLAG_DMAMAP = ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE, + ATA_QCFLAG_DMAMAP = (1 << 1), /* SG table is DMA mapped */ ATA_QCFLAG_IO = (1 << 3), /* standard IO command */ ATA_QCFLAG_RESULT_TF = (1 << 4), /* result TF requested */ ATA_QCFLAG_CLEAR_EXCL = (1 << 5), /* clear excl_link on completion */ @@ -266,19 +266,15 @@ enum { PORT_DISABLED = 2, /* encoding various smaller bitmaps into a single - * unsigned int bitmap + * unsigned long bitmap */ - ATA_BITS_PIO = 7, - ATA_BITS_MWDMA = 5, - ATA_BITS_UDMA = 8, + ATA_NR_PIO_MODES = 7, + ATA_NR_MWDMA_MODES = 5, + ATA_NR_UDMA_MODES = 8, ATA_SHIFT_PIO = 0, - ATA_SHIFT_MWDMA = ATA_SHIFT_PIO + ATA_BITS_PIO, - ATA_SHIFT_UDMA = ATA_SHIFT_MWDMA + ATA_BITS_MWDMA, - - ATA_MASK_PIO = ((1 << ATA_BITS_PIO) - 1) << ATA_SHIFT_PIO, - ATA_MASK_MWDMA = ((1 << ATA_BITS_MWDMA) - 1) << ATA_SHIFT_MWDMA, - ATA_MASK_UDMA = ((1 << ATA_BITS_UDMA) - 1) << ATA_SHIFT_UDMA, + ATA_SHIFT_MWDMA = ATA_SHIFT_PIO + ATA_NR_PIO_MODES, + ATA_SHIFT_UDMA = ATA_SHIFT_MWDMA + ATA_NR_MWDMA_MODES, /* size of buffer to pad xfers ending on unaligned boundaries */ ATA_DMA_PAD_SZ = 4, @@ -349,6 +345,21 @@ enum { ATA_DMA_MASK_ATA = (1 << 0), /* DMA on ATA Disk */ ATA_DMA_MASK_ATAPI = (1 << 1), /* DMA on ATAPI */ ATA_DMA_MASK_CFA = (1 << 2), /* DMA on CF Card */ + + /* ATAPI command types */ + ATAPI_READ = 0, /* READs */ + ATAPI_WRITE = 1, /* WRITEs */ + ATAPI_READ_CD = 2, /* READ CD [MSF] */ + ATAPI_MISC = 3, /* the rest */ +}; + +enum ata_xfer_mask { + ATA_MASK_PIO = ((1LU << ATA_NR_PIO_MODES) - 1) + << ATA_SHIFT_PIO, + ATA_MASK_MWDMA = ((1LU << ATA_NR_MWDMA_MODES) - 1) + << ATA_SHIFT_MWDMA, + ATA_MASK_UDMA = ((1LU << ATA_NR_UDMA_MODES) - 1) + << ATA_SHIFT_UDMA, }; enum hsm_task_states { @@ -447,7 +458,7 @@ struct ata_queued_cmd { unsigned int tag; unsigned int n_elem; unsigned int n_iter; - unsigned int orig_n_elem; + unsigned int mapped_n_elem; int dma_dir; @@ -455,17 +466,18 @@ struct ata_queued_cmd { unsigned int sect_size; unsigned int nbytes; + unsigned int raw_nbytes; unsigned int curbytes; struct scatterlist *cursg; unsigned int cursg_ofs; + struct scatterlist *last_sg; + struct scatterlist saved_last_sg; struct scatterlist sgent; - struct scatterlist pad_sgent; - void *buf_virt; + struct scatterlist extra_sg[2]; - /* DO NOT iterate over __sg manually, use ata_for_each_sg() */ - struct scatterlist *__sg; + struct scatterlist *sg; unsigned int err_mask; struct ata_taskfile result_tf; @@ -482,7 +494,7 @@ struct ata_port_stats { }; struct ata_ering_entry { - int is_io; + unsigned int eflags; unsigned int err_mask; u64 timestamp; }; @@ -522,9 +534,9 @@ struct ata_device { unsigned int cdb_len; /* per-dev xfer mask */ - unsigned int pio_mask; - unsigned int mwdma_mask; - unsigned int udma_mask; + unsigned long pio_mask; + unsigned long mwdma_mask; + unsigned long udma_mask; /* for CHS addressing */ u16 cylinders; /* Number of cylinders */ @@ -560,6 +572,8 @@ struct ata_eh_context { int tries[ATA_MAX_DEVICES]; unsigned int classes[ATA_MAX_DEVICES]; unsigned int did_probe_mask; + unsigned int saved_ncq_enabled; + u8 saved_xfer_mode[ATA_MAX_DEVICES]; }; struct ata_acpi_drive @@ -686,7 +700,8 @@ struct ata_port_operations { void (*bmdma_setup) (struct ata_queued_cmd *qc); void (*bmdma_start) (struct ata_queued_cmd *qc); - void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int); + unsigned int (*data_xfer) (struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw); int (*qc_defer) (struct ata_queued_cmd *qc); void (*qc_prep) (struct ata_queued_cmd *qc); @@ -832,8 +847,6 @@ extern int ata_busy_sleep(struct ata_port *ap, unsigned long timeout_pat, unsigned long timeout); extern void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline); extern int ata_wait_ready(struct ata_port *ap, unsigned long deadline); -extern void ata_port_queue_task(struct ata_port *ap, work_func_t fn, - void *data, unsigned long delay); extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, unsigned long interval_msec, unsigned long timeout_msec); @@ -848,6 +861,16 @@ extern void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf); extern void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis); extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf); +extern unsigned long ata_pack_xfermask(unsigned long pio_mask, + unsigned long mwdma_mask, unsigned long udma_mask); +extern void ata_unpack_xfermask(unsigned long xfer_mask, + unsigned long *pio_mask, unsigned long *mwdma_mask, + unsigned long *udma_mask); +extern u8 ata_xfer_mask2mode(unsigned long xfer_mask); +extern unsigned long ata_xfer_mode2mask(u8 xfer_mode); +extern int ata_xfer_mode2shift(unsigned long xfer_mode); +extern const char *ata_mode_string(unsigned long xfer_mask); +extern unsigned long ata_id_xfermask(const u16 *id); extern void ata_noop_dev_select(struct ata_port *ap, unsigned int device); extern void ata_std_dev_select(struct ata_port *ap, unsigned int device); extern u8 ata_check_status(struct ata_port *ap); @@ -856,17 +879,15 @@ extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) extern int ata_port_start(struct ata_port *ap); extern int ata_sff_port_start(struct ata_port *ap); extern irqreturn_t ata_interrupt(int irq, void *dev_instance); -extern void ata_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data); -extern void ata_data_xfer_noirq(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data); +extern unsigned int ata_data_xfer(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw); +extern unsigned int ata_data_xfer_noirq(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw); extern int ata_std_qc_defer(struct ata_queued_cmd *qc); extern void ata_dumb_qc_prep(struct ata_queued_cmd *qc); extern void ata_qc_prep(struct ata_queued_cmd *qc); extern void ata_noop_qc_prep(struct ata_queued_cmd *qc); extern unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc); -extern void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, - unsigned int buflen); extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem); extern unsigned int ata_dev_classify(const struct ata_taskfile *tf); @@ -875,7 +896,6 @@ extern void ata_id_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len); extern void ata_id_c_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len); -extern void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown); extern void ata_bmdma_setup(struct ata_queued_cmd *qc); extern void ata_bmdma_start(struct ata_queued_cmd *qc); extern void ata_bmdma_stop(struct ata_queued_cmd *qc); @@ -910,6 +930,7 @@ extern u8 ata_irq_on(struct ata_port *ap); extern int ata_cable_40wire(struct ata_port *ap); extern int ata_cable_80wire(struct ata_port *ap); extern int ata_cable_sata(struct ata_port *ap); +extern int ata_cable_ignore(struct ata_port *ap); extern int ata_cable_unknown(struct ata_port *ap); /* @@ -917,11 +938,13 @@ extern int ata_cable_unknown(struct ata_port *ap); */ extern unsigned int ata_pio_need_iordy(const struct ata_device *); +extern const struct ata_timing *ata_timing_find_mode(u8 xfer_mode); extern int ata_timing_compute(struct ata_device *, unsigned short, struct ata_timing *, int, int); extern void ata_timing_merge(const struct ata_timing *, const struct ata_timing *, struct ata_timing *, unsigned int); +extern u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle); enum { ATA_TIMING_SETUP = (1 << 0), @@ -948,15 +971,40 @@ static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap) return &ap->__acpi_init_gtm; return NULL; } -extern int ata_acpi_cbl_80wire(struct ata_port *ap); int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm); int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *stm); +unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev, + const struct ata_acpi_gtm *gtm); +int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm); #else static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap) { return NULL; } -static inline int ata_acpi_cbl_80wire(struct ata_port *ap) { return 0; } + +static inline int ata_acpi_stm(const struct ata_port *ap, + struct ata_acpi_gtm *stm) +{ + return -ENOSYS; +} + +static inline int ata_acpi_gtm(const struct ata_port *ap, + struct ata_acpi_gtm *stm) +{ + return -ENOSYS; +} + +static inline unsigned int ata_acpi_gtm_xfermask(struct ata_device *dev, + const struct ata_acpi_gtm *gtm) +{ + return 0; +} + +static inline int ata_acpi_cbl_80wire(struct ata_port *ap, + const struct ata_acpi_gtm *gtm) +{ + return 0; +} #endif #ifdef CONFIG_PCI @@ -985,8 +1033,12 @@ extern int ata_pci_init_bmdma(struct ata_host *host); extern int ata_pci_prepare_sff_host(struct pci_dev *pdev, const struct ata_port_info * const * ppi, struct ata_host **r_host); +extern int ata_pci_activate_sff_host(struct ata_host *host, + irq_handler_t irq_handler, + struct scsi_host_template *sht); extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits); -extern unsigned long ata_pci_default_filter(struct ata_device *, unsigned long); +extern unsigned long ata_pci_default_filter(struct ata_device *dev, + unsigned long xfer_mask); #endif /* CONFIG_PCI */ /* @@ -1074,35 +1126,6 @@ extern void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset, const char *name); #endif -/* - * qc helpers - */ -static inline struct scatterlist * -ata_qc_first_sg(struct ata_queued_cmd *qc) -{ - qc->n_iter = 0; - if (qc->n_elem) - return qc->__sg; - if (qc->pad_len) - return &qc->pad_sgent; - return NULL; -} - -static inline struct scatterlist * -ata_qc_next_sg(struct scatterlist *sg, struct ata_queued_cmd *qc) -{ - if (sg == &qc->pad_sgent) - return NULL; - if (++qc->n_iter < qc->n_elem) - return sg_next(sg); - if (qc->pad_len) - return &qc->pad_sgent; - return NULL; -} - -#define ata_for_each_sg(sg, qc) \ - for (sg = ata_qc_first_sg(qc); sg; sg = ata_qc_next_sg(sg, qc)) - static inline unsigned int ata_tag_valid(unsigned int tag) { return (tag < ATA_MAX_QUEUE) ? 1 : 0; @@ -1337,15 +1360,17 @@ static inline void ata_tf_init(struct ata_device *dev, struct ata_taskfile *tf) static inline void ata_qc_reinit(struct ata_queued_cmd *qc) { qc->dma_dir = DMA_NONE; - qc->__sg = NULL; + qc->sg = NULL; qc->flags = 0; qc->cursg = NULL; qc->cursg_ofs = 0; - qc->nbytes = qc->curbytes = 0; + qc->nbytes = qc->raw_nbytes = qc->curbytes = 0; qc->n_elem = 0; + qc->mapped_n_elem = 0; qc->n_iter = 0; qc->err_mask = 0; qc->pad_len = 0; + qc->last_sg = NULL; qc->sect_size = ATA_SECT_SIZE; ata_tf_init(qc->dev, &qc->tf); @@ -1362,6 +1387,27 @@ static inline int ata_try_flush_cache(const struct ata_device *dev) ata_id_has_flush_ext(dev->id); } +static inline int atapi_cmd_type(u8 opcode) +{ + switch (opcode) { + case GPCMD_READ_10: + case GPCMD_READ_12: + return ATAPI_READ; + + case GPCMD_WRITE_10: + case GPCMD_WRITE_12: + case GPCMD_WRITE_AND_VERIFY_10: + return ATAPI_WRITE; + + case GPCMD_READ_CD: + case GPCMD_READ_CD_MSF: + return ATAPI_READ_CD; + + default: + return ATAPI_MISC; + } +} + static inline unsigned int ac_err_mask(u8 status) { if (status & (ATA_BUSY | ATA_DRQ)) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 7f2215139e9a..1fbd0256e86b 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2066,6 +2066,9 @@ #define PCI_VENDOR_ID_NETCELL 0x169c #define PCI_DEVICE_ID_REVOLUTION 0x0044 +#define PCI_VENDOR_ID_CENATEK 0x16CA +#define PCI_DEVICE_ID_CENATEK_IDE 0x0001 + #define PCI_VENDOR_ID_VITESSE 0x1725 #define PCI_DEVICE_ID_VITESSE_VSC7174 0x7174 |