aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-opal.txt37
-rw-r--r--arch/powerpc/include/asm/opal.h29
-rw-r--r--arch/powerpc/platforms/powernv/opal-wrappers.S1
-rw-r--r--arch/powerpc/platforms/powernv/opal.c12
-rw-r--r--drivers/i2c/busses/Kconfig11
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-opal.c294
7 files changed, 385 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-opal.txt b/Documentation/devicetree/bindings/i2c/i2c-opal.txt
new file mode 100644
index 000000000000..12bc61465ee5
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-opal.txt
@@ -0,0 +1,37 @@
+Device-tree bindings for I2C OPAL driver
+----------------------------------------
+
+Most of the device node and properties layout is specific to the firmware and
+used by the firmware itself for configuring the port. From the linux
+perspective, the properties of use are "ibm,port-name" and "ibm,opal-id".
+
+Required properties:
+
+- reg: Port-id within a given master
+- compatible: must be "ibm,opal-i2c"
+- ibm,opal-id: Refers to a specific bus and used to identify it when calling
+ the relevant OPAL functions.
+- bus-frequency: Operating frequency of the i2c bus (in HZ). Informational for
+ linux, used by the FW though.
+
+Optional properties:
+- ibm,port-name: Firmware provides this name that uniquely identifies the i2c
+ port.
+
+The node contains a number of other properties that are used by the FW itself
+and depend on the specific hardware implementation. The example below depicts
+a P8 on-chip bus.
+
+Example:
+
+i2c-bus@0 {
+ reg = <0x0>;
+ bus-frequency = <0x61a80>;
+ compatible = "ibm,power8-i2c-port", "ibm,opal-i2c";
+ ibm,opal-id = <0x1>;
+ ibm,port-name = "p8_00000000_e1p0";
+ #address-cells = <0x1>;
+ phandle = <0x10000006>;
+ #size-cells = <0x0>;
+ linux,phandle = <0x10000006>;
+};
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 5cd8d2fddba9..4095749c973f 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -56,6 +56,14 @@ struct opal_sg_list {
#define OPAL_HARDWARE_FROZEN -13
#define OPAL_WRONG_STATE -14
#define OPAL_ASYNC_COMPLETION -15
+#define OPAL_I2C_TIMEOUT -17
+#define OPAL_I2C_INVALID_CMD -18
+#define OPAL_I2C_LBUS_PARITY -19
+#define OPAL_I2C_BKEND_OVERRUN -20
+#define OPAL_I2C_BKEND_ACCESS -21
+#define OPAL_I2C_ARBT_LOST -22
+#define OPAL_I2C_NACK_RCVD -23
+#define OPAL_I2C_STOP_ERR -24
/* API Tokens (in r0) */
#define OPAL_INVALID_CALL -1
@@ -158,6 +166,7 @@ struct opal_sg_list {
#define OPAL_READ_TPO 104
#define OPAL_IPMI_SEND 107
#define OPAL_IPMI_RECV 108
+#define OPAL_I2C_REQUEST 109
#ifndef __ASSEMBLY__
@@ -712,6 +721,24 @@ typedef struct oppanel_line {
uint64_t line_len;
} oppanel_line_t;
+/* OPAL I2C request */
+struct opal_i2c_request {
+ uint8_t type;
+#define OPAL_I2C_RAW_READ 0
+#define OPAL_I2C_RAW_WRITE 1
+#define OPAL_I2C_SM_READ 2
+#define OPAL_I2C_SM_WRITE 3
+ uint8_t flags;
+#define OPAL_I2C_ADDR_10 0x01 /* Not supported yet */
+ uint8_t subaddr_sz; /* Max 4 */
+ uint8_t reserved;
+ __be16 addr; /* 7 or 10 bit address */
+ __be16 reserved2;
+ __be32 subaddr; /* Sub-address if any */
+ __be32 size; /* Data size */
+ __be64 buffer_ra; /* Buffer real address */
+};
+
/* /sys/firmware/opal */
extern struct kobject *opal_kobj;
@@ -881,6 +908,8 @@ int64_t opal_ipmi_send(uint64_t interface, struct opal_ipmi_msg *msg,
uint64_t msg_len);
int64_t opal_ipmi_recv(uint64_t interface, struct opal_ipmi_msg *msg,
uint64_t *msg_len);
+int64_t opal_i2c_request(uint64_t async_token, uint32_t bus_id,
+ struct opal_i2c_request *oreq);
/* Internal functions */
extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 0a299be588af..2111e08d406b 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -254,3 +254,4 @@ OPAL_CALL(opal_tpo_write, OPAL_WRITE_TPO);
OPAL_CALL(opal_tpo_read, OPAL_READ_TPO);
OPAL_CALL(opal_ipmi_send, OPAL_IPMI_SEND);
OPAL_CALL(opal_ipmi_recv, OPAL_IPMI_RECV);
+OPAL_CALL(opal_i2c_request, OPAL_I2C_REQUEST);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index cb0b6de79cd4..aa316d820736 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -653,6 +653,14 @@ static void opal_ipmi_init(struct device_node *opal_node)
of_platform_device_create(np, NULL, NULL);
}
+static void opal_i2c_create_devs(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, "ibm,opal-i2c")
+ of_platform_device_create(np, NULL, NULL);
+}
+
static int __init opal_init(void)
{
struct device_node *np, *consoles;
@@ -679,6 +687,9 @@ static int __init opal_init(void)
of_node_put(consoles);
}
+ /* Create i2c platform devices */
+ opal_i2c_create_devs();
+
/* Find all OPAL interrupts and request them */
irqs = of_get_property(opal_node, "opal-interrupts", &irqlen);
pr_debug("opal: Found %d interrupts reserved for OPAL\n",
@@ -824,3 +835,4 @@ EXPORT_SYMBOL_GPL(opal_rtc_read);
EXPORT_SYMBOL_GPL(opal_rtc_write);
EXPORT_SYMBOL_GPL(opal_tpo_read);
EXPORT_SYMBOL_GPL(opal_tpo_write);
+EXPORT_SYMBOL_GPL(opal_i2c_request);
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 917c3585f45b..71ad6e11efb7 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1044,4 +1044,15 @@ config SCx200_ACB
This support is also available as a module. If so, the module
will be called scx200_acb.
+config I2C_OPAL
+ tristate "IBM OPAL I2C driver"
+ depends on PPC_POWERNV
+ default y
+ help
+ This exposes the PowerNV platform i2c busses to the linux i2c layer,
+ the driver is based on the OPAL interfaces.
+
+ This driver can also be built as a module. If so, the module will be
+ called as i2c-opal.
+
endmenu
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 78d56c54ba2b..e23ec815e21f 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -99,6 +99,7 @@ obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
obj-$(CONFIG_I2C_BCM_KONA) += i2c-bcm-kona.o
obj-$(CONFIG_I2C_CROS_EC_TUNNEL) += i2c-cros-ec-tunnel.o
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
+obj-$(CONFIG_I2C_OPAL) += i2c-opal.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
diff --git a/drivers/i2c/busses/i2c-opal.c b/drivers/i2c/busses/i2c-opal.c
new file mode 100644
index 000000000000..16f90b1a7508
--- /dev/null
+++ b/drivers/i2c/busses/i2c-opal.c
@@ -0,0 +1,294 @@
+/*
+ * IBM OPAL I2C driver
+ * Copyright (C) 2014 IBM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.
+ */
+
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <asm/firmware.h>
+#include <asm/opal.h>
+
+static int i2c_opal_translate_error(int rc)
+{
+ switch (rc) {
+ case OPAL_NO_MEM:
+ return -ENOMEM;
+ case OPAL_PARAMETER:
+ return -EINVAL;
+ case OPAL_I2C_ARBT_LOST:
+ return -EAGAIN;
+ case OPAL_I2C_TIMEOUT:
+ return -ETIMEDOUT;
+ case OPAL_I2C_NACK_RCVD:
+ return -ENXIO;
+ case OPAL_I2C_STOP_ERR:
+ return -EBUSY;
+ default:
+ return -EIO;
+ }
+}
+
+static int i2c_opal_send_request(u32 bus_id, struct opal_i2c_request *req)
+{
+ struct opal_msg msg;
+ int token, rc;
+
+ token = opal_async_get_token_interruptible();
+ if (token < 0) {
+ if (token != -ERESTARTSYS)
+ pr_err("Failed to get the async token\n");
+
+ return token;
+ }
+
+ rc = opal_i2c_request(token, bus_id, req);
+ if (rc != OPAL_ASYNC_COMPLETION) {
+ rc = i2c_opal_translate_error(rc);
+ goto exit;
+ }
+
+ rc = opal_async_wait_response(token, &msg);
+ if (rc)
+ goto exit;
+
+ rc = be64_to_cpu(msg.params[1]);
+ if (rc != OPAL_SUCCESS) {
+ rc = i2c_opal_translate_error(rc);
+ goto exit;
+ }
+
+exit:
+ opal_async_release_token(token);
+ return rc;
+}
+
+static int i2c_opal_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+ int num)
+{
+ unsigned long opal_id = (unsigned long)adap->algo_data;
+ struct opal_i2c_request req;
+ int rc, i;
+
+ /* We only support fairly simple combinations here of one
+ * or two messages
+ */
+ memset(&req, 0, sizeof(req));
+ switch(num) {
+ case 0:
+ return 0;
+ case 1:
+ req.type = (msgs[0].flags & I2C_M_RD) ?
+ OPAL_I2C_RAW_READ : OPAL_I2C_RAW_WRITE;
+ req.addr = cpu_to_be16(msgs[0].addr);
+ req.size = cpu_to_be32(msgs[0].len);
+ req.buffer_ra = cpu_to_be64(__pa(msgs[0].buf));
+ break;
+ case 2:
+ /* For two messages, we basically support only simple
+ * smbus transactions of a write plus a read. We might
+ * want to allow also two writes but we'd have to bounce
+ * the data into a single buffer.
+ */
+ if ((msgs[0].flags & I2C_M_RD) || !(msgs[1].flags & I2C_M_RD))
+ return -EOPNOTSUPP;
+ if (msgs[0].len > 4)
+ return -EOPNOTSUPP;
+ if (msgs[0].addr != msgs[1].addr)
+ return -EOPNOTSUPP;
+ req.type = OPAL_I2C_SM_READ;
+ req.addr = cpu_to_be16(msgs[0].addr);
+ req.subaddr_sz = msgs[0].len;
+ for (i = 0; i < msgs[0].len; i++)
+ req.subaddr = (req.subaddr << 8) | msgs[0].buf[i];
+ req.subaddr = cpu_to_be32(req.subaddr);
+ req.size = cpu_to_be32(msgs[1].len);
+ req.buffer_ra = cpu_to_be64(__pa(msgs[1].buf));
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ rc = i2c_opal_send_request(opal_id, &req);
+ if (rc)
+ return rc;
+
+ return num;
+}
+
+static int i2c_opal_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size, union i2c_smbus_data *data)
+{
+ unsigned long opal_id = (unsigned long)adap->algo_data;
+ struct opal_i2c_request req;
+ u8 local[2];
+ int rc;
+
+ memset(&req, 0, sizeof(req));
+
+ req.addr = cpu_to_be16(addr);
+ switch (size) {
+ case I2C_SMBUS_BYTE:
+ req.buffer_ra = cpu_to_be64(__pa(&data->byte));
+ req.size = cpu_to_be32(1);
+ /* Fall through */
+ case I2C_SMBUS_QUICK:
+ req.type = (read_write == I2C_SMBUS_READ) ?
+ OPAL_I2C_RAW_READ : OPAL_I2C_RAW_WRITE;
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ req.buffer_ra = cpu_to_be64(__pa(&data->byte));
+ req.size = cpu_to_be32(1);
+ req.subaddr = cpu_to_be32(command);
+ req.subaddr_sz = 1;
+ req.type = (read_write == I2C_SMBUS_READ) ?
+ OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE;
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ if (!read_write) {
+ local[0] = data->word & 0xff;
+ local[1] = (data->word >> 8) & 0xff;
+ }
+ req.buffer_ra = cpu_to_be64(__pa(local));
+ req.size = cpu_to_be32(2);
+ req.subaddr = cpu_to_be32(command);
+ req.subaddr_sz = 1;
+ req.type = (read_write == I2C_SMBUS_READ) ?
+ OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE;
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ req.buffer_ra = cpu_to_be64(__pa(&data->block[1]));
+ req.size = cpu_to_be32(data->block[0]);
+ req.subaddr = cpu_to_be32(command);
+ req.subaddr_sz = 1;
+ req.type = (read_write == I2C_SMBUS_READ) ?
+ OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ rc = i2c_opal_send_request(opal_id, &req);
+ if (!rc && read_write && size == I2C_SMBUS_WORD_DATA) {
+ data->word = ((u16)local[1]) << 8;
+ data->word |= local[0];
+ }
+
+ return rc;
+}
+
+static u32 i2c_opal_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_I2C_BLOCK;
+}
+
+static const struct i2c_algorithm i2c_opal_algo = {
+ .master_xfer = i2c_opal_master_xfer,
+ .smbus_xfer = i2c_opal_smbus_xfer,
+ .functionality = i2c_opal_func,
+};
+
+static int i2c_opal_probe(struct platform_device *pdev)
+{
+ struct i2c_adapter *adapter;
+ const char *pname;
+ u32 opal_id;
+ int rc;
+
+ if (!pdev->dev.of_node)
+ return -ENODEV;
+
+ rc = of_property_read_u32(pdev->dev.of_node, "ibm,opal-id", &opal_id);
+ if (rc) {
+ dev_err(&pdev->dev, "Missing ibm,opal-id property !\n");
+ return -EIO;
+ }
+
+ adapter = devm_kzalloc(&pdev->dev, sizeof(*adapter), GFP_KERNEL);
+ if (!adapter)
+ return -ENOMEM;
+
+ adapter->algo = &i2c_opal_algo;
+ adapter->algo_data = (void *)(unsigned long)opal_id;
+ adapter->dev.parent = &pdev->dev;
+ adapter->dev.of_node = of_node_get(pdev->dev.of_node);
+ pname = of_get_property(pdev->dev.of_node, "ibm,port-name", NULL);
+ if (pname)
+ strlcpy(adapter->name, pname, sizeof(adapter->name));
+ else
+ strlcpy(adapter->name, "opal", sizeof(adapter->name));
+
+ platform_set_drvdata(pdev, adapter);
+ rc = i2c_add_adapter(adapter);
+ if (rc)
+ dev_err(&pdev->dev, "Failed to register the i2c adapter\n");
+
+ return rc;
+}
+
+static int i2c_opal_remove(struct platform_device *pdev)
+{
+ struct i2c_adapter *adapter = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(adapter);
+
+ return 0;
+}
+
+static const struct of_device_id i2c_opal_of_match[] = {
+ {
+ .compatible = "ibm,opal-i2c",
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, i2c_opal_of_match);
+
+static struct platform_driver i2c_opal_driver = {
+ .probe = i2c_opal_probe,
+ .remove = i2c_opal_remove,
+ .driver = {
+ .name = "i2c-opal",
+ .of_match_table = i2c_opal_of_match,
+ },
+};
+
+static int __init i2c_opal_init(void)
+{
+ if (!firmware_has_feature(FW_FEATURE_OPAL))
+ return -ENODEV;
+
+ return platform_driver_register(&i2c_opal_driver);
+}
+module_init(i2c_opal_init);
+
+static void __exit i2c_opal_exit(void)
+{
+ return platform_driver_unregister(&i2c_opal_driver);
+}
+module_exit(i2c_opal_exit);
+
+MODULE_AUTHOR("Neelesh Gupta <neelegup@linux.vnet.ibm.com>");
+MODULE_DESCRIPTION("IBM OPAL I2C driver");
+MODULE_LICENSE("GPL");