aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/stable/sysfs-driver-aspeed-vuart11
-rw-r--r--Documentation/admin-guide/kernel-parameters.txt2
-rw-r--r--Documentation/devicetree/bindings/serial/8250.txt5
-rw-r--r--Documentation/devicetree/bindings/serial/fsl-lpuart.txt3
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,sci-serial.txt6
-rw-r--r--Documentation/process/magic-number.rst1
-rw-r--r--Documentation/translations/it_IT/process/magic-number.rst1
-rw-r--r--Documentation/translations/zh_CN/process/magic-number.rst1
-rw-r--r--arch/arm/boot/dts/aspeed-g5.dtsi1
-rw-r--r--drivers/mtd/nand/onenand/Makefile2
-rw-r--r--drivers/mtd/nand/onenand/samsung_mtd.c (renamed from drivers/mtd/nand/onenand/samsung.c)0
-rw-r--r--drivers/net/wan/z85230.h2
-rw-r--r--drivers/tty/Kconfig40
-rw-r--r--drivers/tty/amiserial.c84
-rw-r--r--drivers/tty/hvc/Kconfig28
-rw-r--r--drivers/tty/hvc/hvc_dcc.c28
-rw-r--r--drivers/tty/rocket.c32
-rw-r--r--drivers/tty/serdev/core.c111
-rw-r--r--drivers/tty/serial/8250/8250_aspeed_vuart.c84
-rw-r--r--drivers/tty/serial/8250/8250_dw.c83
-rw-r--r--drivers/tty/serial/8250/8250_exar.c19
-rw-r--r--drivers/tty/serial/8250/8250_lpss.c21
-rw-r--r--drivers/tty/serial/8250/8250_mtk.c2
-rw-r--r--drivers/tty/serial/8250/8250_of.c31
-rw-r--r--drivers/tty/serial/8250/8250_pci.c292
-rw-r--r--drivers/tty/serial/8250/8250_port.c14
-rw-r--r--drivers/tty/serial/8250/Kconfig3
-rw-r--r--drivers/tty/serial/Kconfig104
-rw-r--r--drivers/tty/serial/Makefile2
-rw-r--r--drivers/tty/serial/amba-pl011.c12
-rw-r--r--drivers/tty/serial/fsl_linflexuart.c4
-rw-r--r--drivers/tty/serial/fsl_lpuart.c84
-rw-r--r--drivers/tty/serial/ifx6x60.c3
-rw-r--r--drivers/tty/serial/imx.c7
-rw-r--r--drivers/tty/serial/msm_serial.c10
-rw-r--r--drivers/tty/serial/pch_uart.c5
-rw-r--r--drivers/tty/serial/qcom_geni_serial.c68
-rw-r--r--drivers/tty/serial/samsung_tty.c (renamed from drivers/tty/serial/samsung.c)0
-rw-r--r--drivers/tty/serial/serial-tegra.c3
-rw-r--r--drivers/tty/serial/serial_core.c2
-rw-r--r--drivers/tty/serial/sirfsoc_uart.h5
-rw-r--r--drivers/tty/serial/sprd_serial.c33
-rw-r--r--drivers/tty/serial/stm32-usart.c6
-rw-r--r--drivers/tty/serial/uartlite.c97
-rw-r--r--drivers/tty/tty_io.c14
-rw-r--r--drivers/tty/tty_ldisc.c7
-rw-r--r--drivers/tty/vt/keyboard.c2
-rw-r--r--drivers/tty/vt/vc_screen.c3
-rw-r--r--include/uapi/linux/serial_core.h2
49 files changed, 665 insertions, 715 deletions
diff --git a/Documentation/ABI/stable/sysfs-driver-aspeed-vuart b/Documentation/ABI/stable/sysfs-driver-aspeed-vuart
index 8062953ce77b..950cafc9443a 100644
--- a/Documentation/ABI/stable/sysfs-driver-aspeed-vuart
+++ b/Documentation/ABI/stable/sysfs-driver-aspeed-vuart
@@ -6,10 +6,19 @@ Description: Configures which IO port the host side of the UART
Users: OpenBMC. Proposed changes should be mailed to
openbmc@lists.ozlabs.org
-What: /sys/bus/platform/drivers/aspeed-vuart*/sirq
+What: /sys/bus/platform/drivers/aspeed-vuart/*/sirq
Date: April 2017
Contact: Jeremy Kerr <jk@ozlabs.org>
Description: Configures which interrupt number the host side of
the UART will appear on the host <-> BMC LPC bus.
Users: OpenBMC. Proposed changes should be mailed to
openbmc@lists.ozlabs.org
+
+What: /sys/bus/platform/drivers/aspeed-vuart/*/sirq_polarity
+Date: July 2019
+Contact: Oskar Senft <osk@google.com>
+Description: Configures the polarity of the serial interrupt to the
+ host via the BMC LPC bus.
+ Set to 0 for active-low or 1 for active-high.
+Users: OpenBMC. Proposed changes should be mailed to
+ openbmc@lists.ozlabs.org
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 4f34799e0576..5a92d89a1bd4 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1097,7 +1097,7 @@
mapped with the correct attributes.
linflex,<addr>
- Use early console provided by Freescale LinFlex UART
+ Use early console provided by Freescale LINFlexD UART
serial driver for NXP S32V234 SoCs. A valid base
address must be provided, and the serial port must
already be setup and configured.
diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt
index 20d351f268ef..55700f20f6ee 100644
--- a/Documentation/devicetree/bindings/serial/8250.txt
+++ b/Documentation/devicetree/bindings/serial/8250.txt
@@ -56,6 +56,11 @@ Optional properties:
- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
line respectively. It will use specified GPIO instead of the peripheral
function pin for the UART feature. If unsure, don't specify this property.
+- aspeed,sirq-polarity-sense: Only applicable to aspeed,ast2500-vuart.
+ phandle to aspeed,ast2500-scu compatible syscon alongside register offset
+ and bit number to identify how the SIRQ polarity should be configured.
+ One possible data source is the LPC/eSPI mode bit.
+ Example: aspeed,sirq-polarity-sense = <&syscon 0x70 25>
Note:
* fsl,ns16550:
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
index 3495eee81d53..f5f5ab0fd14e 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
@@ -21,8 +21,7 @@ Required properties:
Optional properties:
- dmas: A list of two dma specifiers, one for each entry in dma-names.
- dma-names: should contain "tx" and "rx".
-- rs485-rts-delay, rs485-rts-active-low, rs485-rx-during-tx,
- linux,rs485-enabled-at-boot-time: see rs485.txt
+- rs485-rts-active-low, linux,rs485-enabled-at-boot-time: see rs485.txt
Note: Optional properties for DMA support. Write them both or both not.
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index b143d9a21b2d..a5edf4b70c7a 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -54,8 +54,10 @@ Required properties:
- "renesas,hscif-r8a7794" for R8A7794 (R-Car E2) HSCIF compatible UART.
- "renesas,scif-r8a7795" for R8A7795 (R-Car H3) SCIF compatible UART.
- "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
- - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART.
- - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART.
+ - "renesas,scif-r8a7796" for R8A77960 (R-Car M3-W) SCIF compatible UART.
+ - "renesas,hscif-r8a7796" for R8A77960 (R-Car M3-W) HSCIF compatible UART.
+ - "renesas,scif-r8a77961" for R8A77961 (R-Car M3-W+) SCIF compatible UART.
+ - "renesas,hscif-r8a77961" for R8A77961 (R-Car M3-W+) HSCIF compatible UART.
- "renesas,scif-r8a77965" for R8A77965 (R-Car M3-N) SCIF compatible UART.
- "renesas,hscif-r8a77965" for R8A77965 (R-Car M3-N) HSCIF compatible UART.
- "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART.
diff --git a/Documentation/process/magic-number.rst b/Documentation/process/magic-number.rst
index 547bbf28e615..eee9b44553b3 100644
--- a/Documentation/process/magic-number.rst
+++ b/Documentation/process/magic-number.rst
@@ -81,7 +81,6 @@ FF_MAGIC 0x4646 fc_info ``drivers/net/ip
ISICOM_MAGIC 0x4d54 isi_port ``include/linux/isicom.h``
PTY_MAGIC 0x5001 ``drivers/char/pty.c``
PPP_MAGIC 0x5002 ppp ``include/linux/if_pppvar.h``
-SERIAL_MAGIC 0x5301 async_struct ``include/linux/serial.h``
SSTATE_MAGIC 0x5302 serial_state ``include/linux/serial.h``
SLIP_MAGIC 0x5302 slip ``drivers/net/slip.h``
STRIP_MAGIC 0x5303 strip ``drivers/net/strip.c``
diff --git a/Documentation/translations/it_IT/process/magic-number.rst b/Documentation/translations/it_IT/process/magic-number.rst
index ed1121d0ba84..783e0de314a0 100644
--- a/Documentation/translations/it_IT/process/magic-number.rst
+++ b/Documentation/translations/it_IT/process/magic-number.rst
@@ -87,7 +87,6 @@ FF_MAGIC 0x4646 fc_info ``drivers/net/ip
ISICOM_MAGIC 0x4d54 isi_port ``include/linux/isicom.h``
PTY_MAGIC 0x5001 ``drivers/char/pty.c``
PPP_MAGIC 0x5002 ppp ``include/linux/if_pppvar.h``
-SERIAL_MAGIC 0x5301 async_struct ``include/linux/serial.h``
SSTATE_MAGIC 0x5302 serial_state ``include/linux/serial.h``
SLIP_MAGIC 0x5302 slip ``drivers/net/slip.h``
STRIP_MAGIC 0x5303 strip ``drivers/net/strip.c``
diff --git a/Documentation/translations/zh_CN/process/magic-number.rst b/Documentation/translations/zh_CN/process/magic-number.rst
index 15c592518194..e4c225996af0 100644
--- a/Documentation/translations/zh_CN/process/magic-number.rst
+++ b/Documentation/translations/zh_CN/process/magic-number.rst
@@ -70,7 +70,6 @@ FF_MAGIC 0x4646 fc_info ``drivers/net/ip
ISICOM_MAGIC 0x4d54 isi_port ``include/linux/isicom.h``
PTY_MAGIC 0x5001 ``drivers/char/pty.c``
PPP_MAGIC 0x5002 ppp ``include/linux/if_pppvar.h``
-SERIAL_MAGIC 0x5301 async_struct ``include/linux/serial.h``
SSTATE_MAGIC 0x5302 serial_state ``include/linux/serial.h``
SLIP_MAGIC 0x5302 slip ``drivers/net/slip.h``
STRIP_MAGIC 0x5303 strip ``drivers/net/strip.c``
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index e8feb8b66a2f..f56b8d143ba7 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -379,6 +379,7 @@
interrupts = <8>;
clocks = <&syscon ASPEED_CLK_APB>;
no-loopback-test;
+ aspeed,sirq-polarity-sense = <&syscon 0x70 25>;
status = "disabled";
};
diff --git a/drivers/mtd/nand/onenand/Makefile b/drivers/mtd/nand/onenand/Makefile
index f8b624aca9cc..a27b635eb23a 100644
--- a/drivers/mtd/nand/onenand/Makefile
+++ b/drivers/mtd/nand/onenand/Makefile
@@ -9,6 +9,6 @@ obj-$(CONFIG_MTD_ONENAND) += onenand.o
# Board specific.
obj-$(CONFIG_MTD_ONENAND_GENERIC) += generic.o
obj-$(CONFIG_MTD_ONENAND_OMAP2) += omap2.o
-obj-$(CONFIG_MTD_ONENAND_SAMSUNG) += samsung.o
+obj-$(CONFIG_MTD_ONENAND_SAMSUNG) += samsung_mtd.o
onenand-objs = onenand_base.o onenand_bbt.o
diff --git a/drivers/mtd/nand/onenand/samsung.c b/drivers/mtd/nand/onenand/samsung_mtd.c
index 55e5536a5850..55e5536a5850 100644
--- a/drivers/mtd/nand/onenand/samsung.c
+++ b/drivers/mtd/nand/onenand/samsung_mtd.c
diff --git a/drivers/net/wan/z85230.h b/drivers/net/wan/z85230.h
index 32ae710d4f40..1081d171e477 100644
--- a/drivers/net/wan/z85230.h
+++ b/drivers/net/wan/z85230.h
@@ -421,8 +421,6 @@ extern struct z8530_irqhandler z8530_sync, z8530_async, z8530_nop;
* Asynchronous Interfacing
*/
-#define SERIAL_MAGIC 0x5301
-
/*
* The size of the serial xmit buffer is 1 page, or 4096 bytes
*/
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index c7623f99ac0f..a312cb33a99b 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -82,20 +82,20 @@ config HW_CONSOLE
default y
config VT_HW_CONSOLE_BINDING
- bool "Support for binding and unbinding console drivers"
- depends on HW_CONSOLE
- ---help---
- The virtual terminal is the device that interacts with the physical
- terminal through console drivers. On these systems, at least one
- console driver is loaded. In other configurations, additional console
- drivers may be enabled, such as the framebuffer console. If more than
- 1 console driver is enabled, setting this to 'y' will allow you to
- select the console driver that will serve as the backend for the
- virtual terminals.
-
- See <file:Documentation/driver-api/console.rst> for more
- information. For framebuffer console users, please refer to
- <file:Documentation/fb/fbcon.rst>.
+ bool "Support for binding and unbinding console drivers"
+ depends on HW_CONSOLE
+ ---help---
+ The virtual terminal is the device that interacts with the physical
+ terminal through console drivers. On these systems, at least one
+ console driver is loaded. In other configurations, additional console
+ drivers may be enabled, such as the framebuffer console. If more than
+ 1 console driver is enabled, setting this to 'y' will allow you to
+ select the console driver that will serve as the backend for the
+ virtual terminals.
+
+ See <file:Documentation/driver-api/console.rst> for more
+ information. For framebuffer console users, please refer to
+ <file:Documentation/fb/fbcon.rst>.
config UNIX98_PTYS
bool "Unix98 PTY support" if EXPERT
@@ -173,15 +173,15 @@ config ROCKETPORT
depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
help
This driver supports Comtrol RocketPort and RocketModem PCI boards.
- These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
- modems. For information about the RocketPort/RocketModem boards
- and this driver read <file:Documentation/driver-api/serial/rocket.rst>.
+ These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
+ modems. For information about the RocketPort/RocketModem boards
+ and this driver read <file:Documentation/driver-api/serial/rocket.rst>.
To compile this driver as a module, choose M here: the
module will be called rocket.
If you want to compile this driver into the kernel, say Y here. If
- you don't have a Comtrol RocketPort/RocketModem card installed, say N.
+ you don't have a Comtrol RocketPort/RocketModem card installed, say N.
config CYCLADES
tristate "Cyclades async mux support"
@@ -437,8 +437,8 @@ config MIPS_EJTAG_FDC_KGDB
depends on MIPS_EJTAG_FDC_TTY && KGDB
default y
help
- This enables the use of KGDB over an FDC channel, allowing KGDB to be
- used remotely or when a serial port isn't available.
+ This enables the use of KGDB over an FDC channel, allowing KGDB to be
+ used remotely or when a serial port isn't available.
config MIPS_EJTAG_FDC_KGDB_CHAN
int "KGDB FDC channel"
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 8330fd809a05..13f63c01c589 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -22,18 +22,8 @@
*
*/
-/*
- * Serial driver configuration section. Here are the various options:
- *
- * SERIAL_PARANOIA_CHECK
- * Check the magic number for the async_structure where
- * ever possible.
- */
-
#include <linux/delay.h>
-#undef SERIAL_PARANOIA_CHECK
-
/* Set of debugging defines */
#undef SERIAL_DEBUG_INTR
@@ -132,28 +122,6 @@ static struct serial_state rs_table[1];
#define serial_isroot() (capable(CAP_SYS_ADMIN))
-
-static inline int serial_paranoia_check(struct serial_state *info,
- char *name, const char *routine)
-{
-#ifdef SERIAL_PARANOIA_CHECK
- static const char *badmagic =
- "Warning: bad magic number for serial struct (%s) in %s\n";
- static const char *badinfo =
- "Warning: null async_struct for (%s) in %s\n";
-
- if (!info) {
- printk(badinfo, name, routine);
- return 1;
- }
- if (info->magic != SERIAL_MAGIC) {
- printk(badmagic, name, routine);
- return 1;
- }
-#endif
- return 0;
-}
-
/* some serial hardware definitions */
#define SDR_OVRUN (1<<15)
#define SDR_RBF (1<<14)
@@ -189,9 +157,6 @@ static void rs_stop(struct tty_struct *tty)
struct serial_state *info = tty->driver_data;
unsigned long flags;
- if (serial_paranoia_check(info, tty->name, "rs_stop"))
- return;
-
local_irq_save(flags);
if (info->IER & UART_IER_THRI) {
info->IER &= ~UART_IER_THRI;
@@ -209,9 +174,6 @@ static void rs_start(struct tty_struct *tty)
struct serial_state *info = tty->driver_data;
unsigned long flags;
- if (serial_paranoia_check(info, tty->name, "rs_start"))
- return;
-
local_irq_save(flags);
if (info->xmit.head != info->xmit.tail
&& info->xmit.buf
@@ -783,9 +745,6 @@ static int rs_put_char(struct tty_struct *tty, unsigned char ch)
info = tty->driver_data;
- if (serial_paranoia_check(info, tty->name, "rs_put_char"))
- return 0;
-
if (!info->xmit.buf)
return 0;
@@ -808,9 +767,6 @@ static void rs_flush_chars(struct tty_struct *tty)
struct serial_state *info = tty->driver_data;
unsigned long flags;
- if (serial_paranoia_check(info, tty->name, "rs_flush_chars"))
- return;
-
if (info->xmit.head == info->xmit.tail
|| tty->stopped
|| tty->hw_stopped
@@ -833,9 +789,6 @@ static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count
struct serial_state *info = tty->driver_data;
unsigned long flags;
- if (serial_paranoia_check(info, tty->name, "rs_write"))
- return 0;
-
if (!info->xmit.buf)
return 0;
@@ -878,8 +831,6 @@ static int rs_write_room(struct tty_struct *tty)
{
struct serial_state *info = tty->driver_data;
- if (serial_paranoia_check(info, tty->name, "rs_write_room"))
- return 0;
return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
}
@@ -887,8 +838,6 @@ static int rs_chars_in_buffer(struct tty_struct *tty)
{
struct serial_state *info = tty->driver_data;
- if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
- return 0;
return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
}
@@ -897,8 +846,6 @@ static void rs_flush_buffer(struct tty_struct *tty)
struct serial_state *info = tty->driver_data;
unsigned long flags;
- if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
- return;
local_irq_save(flags);
info->xmit.head = info->xmit.tail = 0;
local_irq_restore(flags);
@@ -914,9 +861,6 @@ static void rs_send_xchar(struct tty_struct *tty, char ch)
struct serial_state *info = tty->driver_data;
unsigned long flags;
- if (serial_paranoia_check(info, tty->name, "rs_send_xchar"))
- return;
-
info->x_char = ch;
if (ch) {
/* Make sure transmit interrupts are on */
@@ -952,9 +896,6 @@ static void rs_throttle(struct tty_struct * tty)
printk("throttle %s ....\n", tty_name(tty));
#endif
- if (serial_paranoia_check(info, tty->name, "rs_throttle"))
- return;
-
if (I_IXOFF(tty))
rs_send_xchar(tty, STOP_CHAR(tty));
@@ -974,9 +915,6 @@ static void rs_unthrottle(struct tty_struct * tty)
printk("unthrottle %s ....\n", tty_name(tty));
#endif
- if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
- return;
-
if (I_IXOFF(tty)) {
if (info->x_char)
info->x_char = 0;
@@ -1109,8 +1047,6 @@ static int rs_tiocmget(struct tty_struct *tty)
unsigned char control, status;
unsigned long flags;
- if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
- return -ENODEV;
if (tty_io_error(tty))
return -EIO;
@@ -1131,8 +1067,6 @@ static int rs_tiocmset(struct tty_struct *tty, unsigned int set,
struct serial_state *info = tty->driver_data;
unsigned long flags;
- if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
- return -ENODEV;
if (tty_io_error(tty))
return -EIO;
@@ -1155,12 +1089,8 @@ static int rs_tiocmset(struct tty_struct *tty, unsigned int set,
*/
static int rs_break(struct tty_struct *tty, int break_state)
{
- struct serial_state *info = tty->driver_data;
unsigned long flags;
- if (serial_paranoia_check(info, tty->name, "rs_break"))
- return -EINVAL;
-
local_irq_save(flags);
if (break_state == -1)
custom.adkcon = AC_SETCLR | AC_UARTBRK;
@@ -1212,9 +1142,6 @@ static int rs_ioctl(struct tty_struct *tty,
DEFINE_WAIT(wait);
int ret;
- if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
- return -ENODEV;
-
if ((cmd != TIOCSERCONFIG) &&
(cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
if (tty_io_error(tty))
@@ -1333,9 +1260,6 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
struct serial_state *state = tty->driver_data;
struct tty_port *port = &state->tport;
- if (serial_paranoia_check(state, tty->name, "rs_close"))
- return;
-
if (tty_port_close_start(port, tty, filp) == 0)
return;
@@ -1379,9 +1303,6 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
unsigned long orig_jiffies, char_time;
int lsr;
- if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent"))
- return;
-
if (info->xmit_fifo_size == 0)
return; /* Just in case.... */
@@ -1440,9 +1361,6 @@ static void rs_hangup(struct tty_struct *tty)
{
struct serial_state *info = tty->driver_data;
- if (serial_paranoia_check(info, tty->name, "rs_hangup"))
- return;
-
rs_flush_buffer(tty);
shutdown(tty, info);
info->tport.count = 0;
@@ -1467,8 +1385,6 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
port->tty = tty;
tty->driver_data = info;
tty->port = port;
- if (serial_paranoia_check(info, tty->name, "rs_open"))
- return -ENODEV;
port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
index 4487a6b9acc8..6a3c97d345a0 100644
--- a/drivers/tty/hvc/Kconfig
+++ b/drivers/tty/hvc/Kconfig
@@ -70,22 +70,22 @@ config HVC_XEN_FRONTEND
Xen driver for secondary virtual consoles
config HVC_UDBG
- bool "udbg based fake hypervisor console"
- depends on PPC
- select HVC_DRIVER
- help
- This is meant to be used during HW bring up or debugging when
- no other console mechanism exist but udbg, to get you a quick
- console for userspace. Do NOT enable in production kernels.
+ bool "udbg based fake hypervisor console"
+ depends on PPC
+ select HVC_DRIVER
+ help
+ This is meant to be used during HW bring up or debugging when
+ no other console mechanism exist but udbg, to get you a quick
+ console for userspace. Do NOT enable in production kernels.
config HVC_DCC
- bool "ARM JTAG DCC console"
- depends on ARM || ARM64
- select HVC_DRIVER
- help
- This console uses the JTAG DCC on ARM to create a console under the HVC
- driver. This console is used through a JTAG only on ARM. If you don't have
- a JTAG then you probably don't want this option.
+ bool "ARM JTAG DCC console"
+ depends on ARM || ARM64
+ select HVC_DRIVER
+ help
+ This console uses the JTAG DCC on ARM to create a console under the HVC
+ driver. This console is used through a JTAG only on ARM. If you don't have
+ a JTAG then you probably don't want this option.
config HVC_RISCV_SBI
bool "RISC-V SBI console support"
diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c
index 02629a1f193d..8e0edb7d93fd 100644
--- a/drivers/tty/hvc/hvc_dcc.c
+++ b/drivers/tty/hvc/hvc_dcc.c
@@ -1,7 +1,10 @@
// SPDX-License-Identifier: GPL-2.0
/* Copyright (c) 2010, 2014 The Linux Foundation. All rights reserved. */
+#include <linux/console.h>
#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
#include <asm/dcc.h>
#include <asm/processor.h>
@@ -12,6 +15,31 @@
#define DCC_STATUS_RX (1 << 30)
#define DCC_STATUS_TX (1 << 29)
+static void dcc_uart_console_putchar(struct uart_port *port, int ch)
+{
+ while (__dcc_getstatus() & DCC_STATUS_TX)
+ cpu_relax();
+
+ __dcc_putchar(ch);
+}
+
+static void dcc_early_write(struct console *con, const char *s, unsigned n)
+{
+ struct earlycon_device *dev = con->data;
+
+ uart_console_write(&dev->port, s, n, dcc_uart_console_putchar);
+}
+
+static int __init dcc_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ device->con->write = dcc_early_write;
+
+ return 0;
+}
+
+EARLYCON_DECLARE(dcc, dcc_early_console_setup);
+
static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
{
int i;
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index 5ba6816ebf81..fbaa4ec85560 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -1222,22 +1222,28 @@ static int set_config(struct tty_struct *tty, struct r_port *info,
*/
static int get_ports(struct r_port *info, struct rocket_ports __user *retports)
{
- struct rocket_ports tmp;
- int board;
+ struct rocket_ports *tmp;
+ int board, ret = 0;
- memset(&tmp, 0, sizeof (tmp));
- tmp.tty_major = rocket_driver->major;
+ tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ tmp->tty_major = rocket_driver->major;
for (board = 0; board < 4; board++) {
- tmp.rocketModel[board].model = rocketModel[board].model;
- strcpy(tmp.rocketModel[board].modelString, rocketModel[board].modelString);
- tmp.rocketModel[board].numPorts = rocketModel[board].numPorts;
- tmp.rocketModel[board].loadrm2 = rocketModel[board].loadrm2;
- tmp.rocketModel[board].startingPortNumber = rocketModel[board].startingPortNumber;
- }
- if (copy_to_user(retports, &tmp, sizeof (*retports)))
- return -EFAULT;
- return 0;
+ tmp->rocketModel[board].model = rocketModel[board].model;
+ strcpy(tmp->rocketModel[board].modelString,
+ rocketModel[board].modelString);
+ tmp->rocketModel[board].numPorts = rocketModel[board].numPorts;
+ tmp->rocketModel[board].loadrm2 = rocketModel[board].loadrm2;
+ tmp->rocketModel[board].startingPortNumber =
+ rocketModel[board].startingPortNumber;
+ }
+ if (copy_to_user(retports, tmp, sizeof(*retports)))
+ ret = -EFAULT;
+ kfree(tmp);
+ return ret;
}
static int reset_rm2(struct r_port *info, void __user *arg)
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index a0ac16ee6575..226adeec2aed 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -552,16 +552,97 @@ static int of_serdev_register_devices(struct serdev_controller *ctrl)
}
#ifdef CONFIG_ACPI
+
+#define SERDEV_ACPI_MAX_SCAN_DEPTH 32
+
+struct acpi_serdev_lookup {
+ acpi_handle device_handle;
+ acpi_handle controller_handle;
+ int n;
+ int index;
+};
+
+static int acpi_serdev_parse_resource(struct acpi_resource *ares, void *data)
+{
+ struct acpi_serdev_lookup *lookup = data;
+ struct acpi_resource_uart_serialbus *sb;
+ acpi_status status;
+
+ if (ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
+ return 1;
+
+ if (ares->data.common_serial_bus.type != ACPI_RESOURCE_SERIAL_TYPE_UART)
+ return 1;
+
+ if (lookup->index != -1 && lookup->n++ != lookup->index)
+ return 1;
+
+ sb = &ares->data.uart_serial_bus;
+
+ status = acpi_get_handle(lookup->device_handle,
+ sb->resource_source.string_ptr,
+ &lookup->controller_handle);
+ if (ACPI_FAILURE(status))
+ return 1;
+
+ /*
+ * NOTE: Ideally, we would also want to retreive other properties here,
+ * once setting them before opening the device is supported by serdev.
+ */
+
+ return 1;
+}
+
+static int acpi_serdev_do_lookup(struct acpi_device *adev,
+ struct acpi_serdev_lookup *lookup)
+{
+ struct list_head resource_list;
+ int ret;
+
+ lookup->device_handle = acpi_device_handle(adev);
+ lookup->controller_handle = NULL;
+ lookup->n = 0;
+
+ INIT_LIST_HEAD(&resource_list);
+ ret = acpi_dev_get_resources(adev, &resource_list,
+ acpi_serdev_parse_resource, lookup);
+ acpi_dev_free_resource_list(&resource_list);
+
+ if (ret < 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int acpi_serdev_check_resources(struct serdev_controller *ctrl,
+ struct acpi_device *adev)
+{
+ struct acpi_serdev_lookup lookup;
+ int ret;
+
+ if (acpi_bus_get_status(adev) || !adev->status.present)
+ return -EINVAL;
+
+ /* Look for UARTSerialBusV2 resource */
+ lookup.index = -1; // we only care for the last device
+
+ ret = acpi_serdev_do_lookup(adev, &lookup);
+ if (ret)
+ return ret;
+
+ /* Make sure controller and ResourceSource handle match */
+ if (ACPI_HANDLE(ctrl->dev.parent) != lookup.controller_handle)
+ return -ENODEV;
+
+ return 0;
+}
+
static acpi_status acpi_serdev_register_device(struct serdev_controller *ctrl,
- struct acpi_device *adev)
+ struct acpi_device *adev)
{
- struct serdev_device *serdev = NULL;
+ struct serdev_device *serdev;
int err;
- if (acpi_bus_get_status(adev) || !adev->status.present ||
- acpi_device_enumerated(adev))
- return AE_OK;
-
serdev = serdev_device_alloc(ctrl);
if (!serdev) {
dev_err(&ctrl->dev, "failed to allocate serdev device for %s\n",
@@ -583,7 +664,7 @@ static acpi_status acpi_serdev_register_device(struct serdev_controller *ctrl,
}
static acpi_status acpi_serdev_add_device(acpi_handle handle, u32 level,
- void *data, void **return_value)
+ void *data, void **return_value)
{
struct serdev_controller *ctrl = data;
struct acpi_device *adev;
@@ -591,22 +672,28 @@ static acpi_status acpi_serdev_add_device(acpi_handle handle, u32 level,
if (acpi_bus_get_device(handle, &adev))
return AE_OK;
+ if (acpi_device_enumerated(adev))
+ return AE_OK;
+
+ if (acpi_serdev_check_resources(ctrl, adev))
+ return AE_OK;
+
return acpi_serdev_register_device(ctrl, adev);
}
+
static int acpi_serdev_register_devices(struct serdev_controller *ctrl)
{
acpi_status status;
- acpi_handle handle;
- handle = ACPI_HANDLE(ctrl->dev.parent);
- if (!handle)
+ if (!has_acpi_companion(ctrl->dev.parent))
return -ENODEV;
- status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+ SERDEV_ACPI_MAX_SCAN_DEPTH,
acpi_serdev_add_device, NULL, ctrl, NULL);
if (ACPI_FAILURE(status))
- dev_dbg(&ctrl->dev, "failed to enumerate serdev slaves\n");
+ dev_warn(&ctrl->dev, "failed to enumerate serdev slaves\n");
if (!ctrl->serdev)
return -ENODEV;
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 0438d9a905ce..6e67fd89445a 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -14,6 +14,8 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/clk.h>
@@ -22,6 +24,7 @@
#define ASPEED_VUART_GCRA 0x20
#define ASPEED_VUART_GCRA_VUART_EN BIT(0)
+#define ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY BIT(1)
#define ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD BIT(5)
#define ASPEED_VUART_GCRB 0x24
#define ASPEED_VUART_GCRB_HOST_SIRQ_MASK GENMASK(7, 4)
@@ -131,8 +134,53 @@ static ssize_t sirq_store(struct device *dev, struct device_attribute *attr,
static DEVICE_ATTR_RW(sirq);
+static ssize_t sirq_polarity_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct aspeed_vuart *vuart = dev_get_drvdata(dev);
+ u8 reg;
+
+ reg = readb(vuart->regs + ASPEED_VUART_GCRA);
+ reg &= ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY;
+
+ return snprintf(buf, PAGE_SIZE - 1, "%u\n", reg ? 1 : 0);
+}
+
+static void aspeed_vuart_set_sirq_polarity(struct aspeed_vuart *vuart,
+ bool polarity)
+{
+ u8 reg = readb(vuart->regs + ASPEED_VUART_GCRA);
+
+ if (polarity)
+ reg |= ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY;
+ else
+ reg &= ~ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY;
+
+ writeb(reg, vuart->regs + ASPEED_VUART_GCRA);
+}
+
+static ssize_t sirq_polarity_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct aspeed_vuart *vuart = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 0, &val);
+ if (err)
+ return err;
+
+ aspeed_vuart_set_sirq_polarity(vuart, val != 0);
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(sirq_polarity);
+
static struct attribute *aspeed_vuart_attrs[] = {
&dev_attr_sirq.attr,
+ &dev_attr_sirq_polarity.attr,
&dev_attr_lpc_address.attr,
NULL,
};
@@ -302,8 +350,30 @@ static int aspeed_vuart_handle_irq(struct uart_port *port)
return 1;
}
+static void aspeed_vuart_auto_configure_sirq_polarity(
+ struct aspeed_vuart *vuart, struct device_node *syscon_np,
+ u32 reg_offset, u32 reg_mask)
+{
+ struct regmap *regmap;
+ u32 value;
+
+ regmap = syscon_node_to_regmap(syscon_np);
+ if (IS_ERR(regmap)) {
+ dev_warn(vuart->dev,
+ "could not get regmap for aspeed,sirq-polarity-sense\n");
+ return;
+ }
+ if (regmap_read(regmap, reg_offset, &value)) {
+ dev_warn(vuart->dev, "could not read hw strap table\n");
+ return;
+ }
+
+ aspeed_vuart_set_sirq_polarity(vuart, (value & reg_mask) == 0);
+}
+
static int aspeed_vuart_probe(struct platform_device *pdev)
{
+ struct of_phandle_args sirq_polarity_sense_args;
struct uart_8250_port port;
struct aspeed_vuart *vuart;
struct device_node *np;
@@ -402,6 +472,20 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
vuart->line = rc;
+ rc = of_parse_phandle_with_fixed_args(
+ np, "aspeed,sirq-polarity-sense", 2, 0,
+ &sirq_polarity_sense_args);
+ if (rc < 0) {
+ dev_dbg(&pdev->dev,
+ "aspeed,sirq-polarity-sense property not found\n");
+ } else {
+ aspeed_vuart_auto_configure_sirq_polarity(
+ vuart, sirq_polarity_sense_args.np,
+ sirq_polarity_sense_args.args[0],
+ BIT(sirq_polarity_sense_args.args[1]));
+ of_node_put(sirq_polarity_sense_args.np);
+ }
+
aspeed_vuart_set_enabled(vuart, true);
aspeed_vuart_set_host_tx_discard(vuart, true);
platform_set_drvdata(pdev, vuart);
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 1c72fdc2dd37..aab3cccc6789 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -280,9 +280,6 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
long rate;
int ret;
- if (IS_ERR(d->clk))
- goto out;
-
clk_disable_unprepare(d->clk);
rate = clk_round_rate(d->clk, baud * 16);
if (rate < 0)
@@ -293,8 +290,10 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
ret = clk_set_rate(d->clk, rate);
clk_prepare_enable(d->clk);
- if (!ret)
- p->uartclk = rate;
+ if (ret)
+ goto out;
+
+ p->uartclk = rate;
out:
p->status &= ~UPSTAT_AUTOCTS;
@@ -386,10 +385,10 @@ static int dw8250_probe(struct platform_device *pdev)
{
struct uart_8250_port uart = {}, *up = &uart;
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- int irq = platform_get_irq(pdev, 0);
struct uart_port *p = &up->port;
struct device *dev = &pdev->dev;
struct dw8250_data *data;
+ int irq;
int err;
u32 val;
@@ -398,11 +397,9 @@ static int dw8250_probe(struct platform_device *pdev)
return -EINVAL;
}
- if (irq < 0) {
- if (irq != -EPROBE_DEFER)
- dev_err(dev, "cannot get irq\n");
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
return irq;
- }
spin_lock_init(&p->lock);
p->mapbase = regs->start;
@@ -472,19 +469,18 @@ static int dw8250_probe(struct platform_device *pdev)
device_property_read_u32(dev, "clock-frequency", &p->uartclk);
/* If there is separate baudclk, get the rate from it. */
- data->clk = devm_clk_get(dev, "baudclk");
- if (IS_ERR(data->clk) && PTR_ERR(data->clk) != -EPROBE_DEFER)
- data->clk = devm_clk_get(dev, NULL);
- if (IS_ERR(data->clk) && PTR_ERR(data->clk) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
- if (!IS_ERR_OR_NULL(data->clk)) {
- err = clk_prepare_enable(data->clk);
- if (err)
- dev_warn(dev, "could not enable optional baudclk: %d\n",
- err);
- else
- p->uartclk = clk_get_rate(data->clk);
- }
+ data->clk = devm_clk_get_optional(dev, "baudclk");
+ if (data->clk == NULL)
+ data->clk = devm_clk_get_optional(dev, NULL);
+ if (IS_ERR(data->clk))
+ return PTR_ERR(data->clk);
+
+ err = clk_prepare_enable(data->clk);
+ if (err)
+ dev_warn(dev, "could not enable optional baudclk: %d\n", err);
+
+ if (data->clk)
+ p->uartclk = clk_get_rate(data->clk);
/* If no clock rate is defined, fail. */
if (!p->uartclk) {
@@ -493,17 +489,16 @@ static int dw8250_probe(struct platform_device *pdev)
goto err_clk;
}
- data->pclk = devm_clk_get(dev, "apb_pclk");
- if (IS_ERR(data->pclk) && PTR_ERR(data->pclk) == -EPROBE_DEFER) {
- err = -EPROBE_DEFER;
+ data->pclk = devm_clk_get_optional(dev, "apb_pclk");
+ if (IS_ERR(data->pclk)) {
+ err = PTR_ERR(data->pclk);
goto err_clk;
}
- if (!IS_ERR(data->pclk)) {
- err = clk_prepare_enable(data->pclk);
- if (err) {
- dev_err(dev, "could not enable apb_pclk\n");
- goto err_clk;
- }
+
+ err = clk_prepare_enable(data->pclk);
+ if (err) {
+ dev_err(dev, "could not enable apb_pclk\n");
+ goto err_clk;
}
data->rst = devm_reset_control_get_optional_exclusive(dev, NULL);
@@ -546,12 +541,10 @@ err_reset:
reset_control_assert(data->rst);
err_pclk:
- if (!IS_ERR(data->pclk))
- clk_disable_unprepare(data->pclk);
+ clk_disable_unprepare(data->pclk);
err_clk:
- if (!IS_ERR(data->clk))
- clk_disable_unprepare(data->clk);
+ clk_disable_unprepare(data->clk);
return err;
}
@@ -567,11 +560,9 @@ static int dw8250_remove(struct platform_device *pdev)
reset_control_assert(data->rst);
- if (!IS_ERR(data->pclk))
- clk_disable_unprepare(data->pclk);
+ clk_disable_unprepare(data->pclk);
- if (!IS_ERR(data->clk))
- clk_disable_unprepare(data->clk);
+ clk_disable_unprepare(data->clk);
pm_runtime_disable(dev);
pm_runtime_put_noidle(dev);
@@ -604,11 +595,9 @@ static int dw8250_runtime_suspend(struct device *dev)
{
struct dw8250_data *data = dev_get_drvdata(dev);
- if (!IS_ERR(data->clk))
- clk_disable_unprepare(data->clk);
+ clk_disable_unprepare(data->clk);
- if (!IS_ERR(data->pclk))
- clk_disable_unprepare(data->pclk);
+ clk_disable_unprepare(data->pclk);
return 0;
}
@@ -617,11 +606,9 @@ static int dw8250_runtime_resume(struct device *dev)
{
struct dw8250_data *data = dev_get_drvdata(dev);
- if (!IS_ERR(data->pclk))
- clk_prepare_enable(data->pclk);
+ clk_prepare_enable(data->pclk);
- if (!IS_ERR(data->clk))
- clk_prepare_enable(data->clk);
+ clk_prepare_enable(data->clk);
return 0;
}
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 597eb9d16f21..108cd55f9c4d 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -166,6 +166,23 @@ static void xr17v35x_set_divisor(struct uart_port *p, unsigned int baud,
serial_port_out(p, 0x2, quot_frac);
}
+static int xr17v35x_startup(struct uart_port *port)
+{
+ /*
+ * First enable access to IER [7:5], ISR [5:4], FCR [5:4],
+ * MCR [7:5] and MSR [7:0]
+ */
+ serial_port_out(port, UART_XR_EFR, UART_EFR_ECB);
+
+ /*
+ * Make sure all interrups are masked until initialization is
+ * complete and the FIFOs are cleared
+ */
+ serial_port_out(port, UART_IER, 0);
+
+ return serial8250_do_startup(port);
+}
+
static void exar_shutdown(struct uart_port *port)
{
unsigned char lsr;
@@ -212,6 +229,8 @@ static int default_setup(struct exar8250 *priv, struct pci_dev *pcidev,
port->port.get_divisor = xr17v35x_get_divisor;
port->port.set_divisor = xr17v35x_set_divisor;
+
+ port->port.startup = xr17v35x_startup;
} else {
port->port.type = PORT_XR17D15X;
}
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 5f72ef3ea574..60eff3240c8a 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -221,17 +221,6 @@ static void qrk_serial_exit_dma(struct lpss8250 *lpss) {}
static int qrk_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
{
- struct pci_dev *pdev = to_pci_dev(port->dev);
- int ret;
-
- pci_set_master(pdev);
-
- ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
- if (ret < 0)
- return ret;
-
- port->irq = pci_irq_vector(pdev, 0);
-
qrk_serial_setup_dma(lpss, port);
return 0;
}
@@ -293,16 +282,22 @@ static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (ret)
return ret;
+ pci_set_master(pdev);
+
lpss = devm_kzalloc(&pdev->dev, sizeof(*lpss), GFP_KERNEL);
if (!lpss)
return -ENOMEM;
+ ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
+ if (ret < 0)
+ return ret;
+
lpss->board = (struct lpss8250_board *)id->driver_data;
memset(&uart, 0, sizeof(struct uart_8250_port));
uart.port.dev = &pdev->dev;
- uart.port.irq = pdev->irq;
+ uart.port.irq = pci_irq_vector(pdev, 0);
uart.port.private_data = &lpss->data;
uart.port.type = PORT_16550A;
uart.port.iotype = UPIO_MEM;
@@ -337,6 +332,7 @@ static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
err_exit:
if (lpss->board->exit)
lpss->board->exit(lpss);
+ pci_free_irq_vectors(pdev);
return ret;
}
@@ -348,6 +344,7 @@ static void lpss8250_remove(struct pci_dev *pdev)
if (lpss->board->exit)
lpss->board->exit(lpss);
+ pci_free_irq_vectors(pdev);
}
static const struct lpss8250_board byt_board = {
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index b411ba4eb5e9..4d067f515f74 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -544,7 +544,7 @@ static int mtk8250_probe(struct platform_device *pdev)
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
- data->rx_wakeup_irq = platform_get_irq(pdev, 1);
+ data->rx_wakeup_irq = platform_get_irq_optional(pdev, 1);
return 0;
}
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 0826cfdbd406..92fbf46ce3bd 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -48,6 +48,36 @@ static inline void tegra_serial_handle_break(struct uart_port *port)
}
#endif
+static int of_8250_rs485_config(struct uart_port *port,
+ struct serial_rs485 *rs485)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+
+ /* Clamp the delays to [0, 100ms] */
+ rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U);
+ rs485->delay_rts_after_send = min(rs485->delay_rts_after_send, 100U);
+
+ port->rs485 = *rs485;
+
+ /*
+ * Both serial8250_em485_init and serial8250_em485_destroy
+ * are idempotent
+ */
+ if (rs485->flags & SER_RS485_ENABLED) {
+ int ret = serial8250_em485_init(up);
+
+ if (ret) {
+ rs485->flags &= ~SER_RS485_ENABLED;
+ port->rs485.flags &= ~SER_RS485_ENABLED;
+ }
+ return ret;
+ }
+
+ serial8250_em485_destroy(up);
+
+ return 0;
+}
+
/*
* Fill a struct uart_port for a given device node
*/
@@ -178,6 +208,7 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
port->flags |= UPF_SKIP_TEST;
port->dev = &ofdev->dev;
+ port->rs485_config = of_8250_rs485_config;
switch (type) {
case PORT_TEGRA:
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 0b8784cd6d71..022924d5ad54 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -743,16 +743,8 @@ static int pci_ni8430_init(struct pci_dev *dev)
}
/* UART Port Control Register */
-#define NI16550_PCR_OFFSET 0x0f
-#define NI16550_PCR_RS422 0x00
-#define NI16550_PCR_ECHO_RS485 0x01
-#define NI16550_PCR_DTR_RS485 0x02
-#define NI16550_PCR_AUTO_RS485 0x03
-#define NI16550_PCR_WIRE_MODE_MASK 0x03
-#define NI16550_PCR_TXVR_ENABLE_BIT BIT(3)
-#define NI16550_PCR_RS485_TERMINATION_BIT BIT(6)
-#define NI16550_ACR_DTR_AUTO_DTR (0x2 << 3)
-#define NI16550_ACR_DTR_MANUAL_DTR (0x0 << 3)
+#define NI8430_PORTCON 0x0f
+#define NI8430_PORTCON_TXVR_ENABLE (1 << 3)
static int
pci_ni8430_setup(struct serial_private *priv,
@@ -774,117 +766,14 @@ pci_ni8430_setup(struct serial_private *priv,
return -ENOMEM;
/* enable the transceiver */
- writeb(readb(p + offset + NI16550_PCR_OFFSET) | NI16550_PCR_TXVR_ENABLE_BIT,
- p + offset + NI16550_PCR_OFFSET);
+ writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE,
+ p + offset + NI8430_PORTCON);
iounmap(p);
return setup_port(priv, port, bar, offset, board->reg_shift);
}
-static int pci_ni8431_config_rs485(struct uart_port *port,
- struct serial_rs485 *rs485)
-{
- u8 pcr, acr;
- struct uart_8250_port *up;
-
- up = container_of(port, struct uart_8250_port, port);
- acr = up->acr;
- pcr = port->serial_in(port, NI16550_PCR_OFFSET);
- pcr &= ~NI16550_PCR_WIRE_MODE_MASK;
-
- if (rs485->flags & SER_RS485_ENABLED) {
- /* RS-485 */
- if ((rs485->flags & SER_RS485_RX_DURING_TX) &&
- (rs485->flags & SER_RS485_RTS_ON_SEND)) {
- dev_dbg(port->dev, "Invalid 2-wire mode\n");
- return -EINVAL;
- }
-
- if (rs485->flags & SER_RS485_RX_DURING_TX) {
- /* Echo */
- dev_vdbg(port->dev, "2-wire DTR with echo\n");
- pcr |= NI16550_PCR_ECHO_RS485;
- acr |= NI16550_ACR_DTR_MANUAL_DTR;
- } else {
- /* Auto or DTR */
- if (rs485->flags & SER_RS485_RTS_ON_SEND) {
- /* Auto */
- dev_vdbg(port->dev, "2-wire Auto\n");
- pcr |= NI16550_PCR_AUTO_RS485;
- acr |= NI16550_ACR_DTR_AUTO_DTR;
- } else {
- /* DTR-controlled */
- /* No Echo */
- dev_vdbg(port->dev, "2-wire DTR no echo\n");
- pcr |= NI16550_PCR_DTR_RS485;
- acr |= NI16550_ACR_DTR_MANUAL_DTR;
- }
- }
- } else {
- /* RS-422 */
- dev_vdbg(port->dev, "4-wire\n");
- pcr |= NI16550_PCR_RS422;
- acr |= NI16550_ACR_DTR_MANUAL_DTR;
- }
-
- dev_dbg(port->dev, "write pcr: 0x%08x\n", pcr);
- port->serial_out(port, NI16550_PCR_OFFSET, pcr);
-
- up->acr = acr;
- port->serial_out(port, UART_SCR, UART_ACR);
- port->serial_out(port, UART_ICR, up->acr);
-
- /* Update the cache. */
- port->rs485 = *rs485;
-
- return 0;
-}
-
-static int pci_ni8431_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *uart, int idx)
-{
- u8 pcr, acr;
- struct pci_dev *dev = priv->dev;
- void __iomem *addr;
- unsigned int bar, offset = board->first_offset;
-
- if (idx >= board->num_ports)
- return 1;
-
- bar = FL_GET_BASE(board->flags);
- offset += idx * board->uart_offset;
-
- addr = pci_ioremap_bar(dev, bar);
- if (!addr)
- return -ENOMEM;
-
- /* enable the transceiver */
- writeb(readb(addr + NI16550_PCR_OFFSET) | NI16550_PCR_TXVR_ENABLE_BIT,
- addr + NI16550_PCR_OFFSET);
-
- pcr = readb(addr + NI16550_PCR_OFFSET);
- pcr &= ~NI16550_PCR_WIRE_MODE_MASK;
-
- /* set wire mode to default RS-422 */
- pcr |= NI16550_PCR_RS422;
- acr = NI16550_ACR_DTR_MANUAL_DTR;
-
- /* write port configuration to register */
- writeb(pcr, addr + NI16550_PCR_OFFSET);
-
- /* access and write to UART acr register */
- writeb(UART_ACR, addr + UART_SCR);
- writeb(acr, addr + UART_ICR);
-
- uart->port.rs485_config = &pci_ni8431_config_rs485;
-
- iounmap(addr);
-
- return setup_port(priv, uart, bar, offset, board->reg_shift);
-}
-
static int pci_netmos_9900_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
@@ -2021,15 +1910,6 @@ pci_moxa_setup(struct serial_private *priv,
#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM 0x10E9
#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM 0x11D8
-#define PCIE_DEVICE_ID_NI_PXIE8430_2328 0x74C2
-#define PCIE_DEVICE_ID_NI_PXIE8430_23216 0x74C1
-#define PCI_DEVICE_ID_NI_PXI8431_4852 0x7081
-#define PCI_DEVICE_ID_NI_PXI8431_4854 0x70DE
-#define PCI_DEVICE_ID_NI_PXI8431_4858 0x70E3
-#define PCI_DEVICE_ID_NI_PXI8433_4852 0x70E9
-#define PCI_DEVICE_ID_NI_PXI8433_4854 0x70ED
-#define PCIE_DEVICE_ID_NI_PXIE8431_4858 0x74C4
-#define PCIE_DEVICE_ID_NI_PXIE8431_48516 0x74C3
#define PCI_DEVICE_ID_MOXA_CP102E 0x1024
#define PCI_DEVICE_ID_MOXA_CP102EL 0x1025
@@ -2267,87 +2147,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.setup = pci_ni8430_setup,
.exit = pci_ni8430_exit,
},
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCIE_DEVICE_ID_NI_PXIE8430_2328,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8430_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCIE_DEVICE_ID_NI_PXIE8430_23216,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8430_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8431_4852,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8431_4854,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8431_4858,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8433_4852,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8433_4854,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCIE_DEVICE_ID_NI_PXIE8431_4858,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCIE_DEVICE_ID_NI_PXIE8431_48516,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
/* Quatech */
{
.vendor = PCI_VENDOR_ID_QUATECH,
@@ -3104,13 +2903,6 @@ enum pci_board_num_t {
pbn_ni8430_4,
pbn_ni8430_8,
pbn_ni8430_16,
- pbn_ni8430_pxie_8,
- pbn_ni8430_pxie_16,
- pbn_ni8431_2,
- pbn_ni8431_4,
- pbn_ni8431_8,
- pbn_ni8431_pxie_8,
- pbn_ni8431_pxie_16,
pbn_ADDIDATA_PCIe_1_3906250,
pbn_ADDIDATA_PCIe_2_3906250,
pbn_ADDIDATA_PCIe_4_3906250,
@@ -3763,55 +3555,6 @@ static struct pciserial_board pci_boards[] = {
.uart_offset = 0x10,
.first_offset = 0x800,
},
- [pbn_ni8430_pxie_16] = {
- .flags = FL_BASE0,
- .num_ports = 16,
- .base_baud = 3125000,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8430_pxie_8] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 3125000,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8431_8] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 3686400,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8431_4] = {
- .flags = FL_BASE0,
- .num_ports = 4,
- .base_baud = 3686400,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8431_2] = {
- .flags = FL_BASE0,
- .num_ports = 2,
- .base_baud = 3686400,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8431_pxie_16] = {
- .flags = FL_BASE0,
- .num_ports = 16,
- .base_baud = 3125000,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8431_pxie_8] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 3125000,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
/*
* ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com>
*/
@@ -5565,33 +5308,6 @@ static const struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ni8430_4 },
- { PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8430_2328,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8430_pxie_8 },
- { PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8430_23216,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8430_pxie_16 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8431_4852,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_2 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8431_4854,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_4 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8431_4858,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_8 },
- { PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8431_4858,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_pxie_8 },
- { PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8431_48516,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_pxie_16 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8433_4852,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_2 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8433_4854,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_4 },
/*
* MOXA
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 8407166610ce..90655910b0c7 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2114,20 +2114,6 @@ int serial8250_do_startup(struct uart_port *port)
enable_rsa(up);
#endif
- if (port->type == PORT_XR17V35X) {
- /*
- * First enable access to IER [7:5], ISR [5:4], FCR [5:4],
- * MCR [7:5] and MSR [7:0]
- */
- serial_port_out(port, UART_XR_EFR, UART_EFR_ECB);
-
- /*
- * Make sure all interrups are masked until initialization is
- * complete and the FIFOs are cleared
- */
- serial_port_out(port, UART_IER, 0);
- }
-
/*
* Clear the FIFO buffers and disable them.
* (they will be reenabled in set_termios())
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 7ef60f8b6e2c..fab3d4f20667 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -243,6 +243,7 @@ config SERIAL_8250_ASPEED_VUART
tristate "Aspeed Virtual UART"
depends on SERIAL_8250
depends on OF
+ depends on REGMAP && MFD_SYSCON
help
If you want to use the virtual UART (VUART) device on Aspeed
BMC platforms, enable this option. This enables the 16550A-
@@ -334,7 +335,7 @@ config SERIAL_8250_BCM2835AUX
Features and limitations of the UART are
Registers are similar to 16650 registers,
- set bits in the control registers that are unsupported
+ set bits in the control registers that are unsupported
are ignored and read back as 0
7/8 bit operation with 1 start and 1 stop bit
8 symbols deep fifo for rx and tx
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 540142c5b7b3..99f5da3bf913 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -287,26 +287,26 @@ config SERIAL_SAMSUNG_CONSOLE
boot time.)
config SERIAL_SIRFSOC
- tristate "SiRF SoC Platform Serial port support"
- depends on ARCH_SIRF
- select SERIAL_CORE
- help
- Support for the on-chip UART on the CSR SiRFprimaII series,
- providing /dev/ttySiRF0, 1 and 2 (note, some machines may not
- provide all of these ports, depending on how the serial port
- pins are configured).
+ tristate "SiRF SoC Platform Serial port support"
+ depends on ARCH_SIRF
+ select SERIAL_CORE
+ help
+ Support for the on-chip UART on the CSR SiRFprimaII series,
+ providing /dev/ttySiRF0, 1 and 2 (note, some machines may not
+ provide all of these ports, depending on how the serial port
+ pins are configured).
config SERIAL_SIRFSOC_CONSOLE
- bool "Support for console on SiRF SoC serial port"
- depends on SERIAL_SIRFSOC=y
- select SERIAL_CORE_CONSOLE
- help
- Even if you say Y here, the currently visible virtual console
- (/dev/tty0) will still be used as the system console by default, but
- you can alter that using a kernel command line option such as
- "console=ttySiRFx". (Try "man bootparam" or see the documentation of
- your boot loader about how to pass options to the kernel at
- boot time.)
+ bool "Support for console on SiRF SoC serial port"
+ depends on SERIAL_SIRFSOC=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttySiRFx". (Try "man bootparam" or see the documentation of
+ your boot loader about how to pass options to the kernel at
+ boot time.)
config SERIAL_TEGRA
tristate "NVIDIA Tegra20/30 SoC serial controller"
@@ -1078,41 +1078,41 @@ config SERIAL_SCCNXP_CONSOLE
Support for console on SCCNXP serial ports.
config SERIAL_SC16IS7XX_CORE
- tristate
+ tristate
config SERIAL_SC16IS7XX
- tristate "SC16IS7xx serial support"
- select SERIAL_CORE
- depends on (SPI_MASTER && !I2C) || I2C
- help
- This selects support for SC16IS7xx serial ports.
- Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,
- SC16IS760 and SC16IS762. Select supported buses using options below.
+ tristate "SC16IS7xx serial support"
+ select SERIAL_CORE
+ depends on (SPI_MASTER && !I2C) || I2C
+ help
+ This selects support for SC16IS7xx serial ports.
+ Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,
+ SC16IS760 and SC16IS762. Select supported buses using options below.
config SERIAL_SC16IS7XX_I2C
- bool "SC16IS7xx for I2C interface"
- depends on SERIAL_SC16IS7XX
- depends on I2C
- select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
- select REGMAP_I2C if I2C
- default y
- help
- Enable SC16IS7xx driver on I2C bus,
- If required say y, and say n to i2c if not required,
- Enabled by default to support oldconfig.
- You must select at least one bus for the driver to be built.
+ bool "SC16IS7xx for I2C interface"
+ depends on SERIAL_SC16IS7XX
+ depends on I2C
+ select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
+ select REGMAP_I2C if I2C
+ default y
+ help
+ Enable SC16IS7xx driver on I2C bus,
+ If required say y, and say n to i2c if not required,
+ Enabled by default to support oldconfig.
+ You must select at least one bus for the driver to be built.
config SERIAL_SC16IS7XX_SPI
- bool "SC16IS7xx for spi interface"
- depends on SERIAL_SC16IS7XX
- depends on SPI_MASTER
- select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
- select REGMAP_SPI if SPI_MASTER
- help
- Enable SC16IS7xx driver on SPI bus,
- If required say y, and say n to spi if not required,
- This is additional support to exsisting driver.
- You must select at least one bus for the driver to be built.
+ bool "SC16IS7xx for spi interface"
+ depends on SERIAL_SC16IS7XX
+ depends on SPI_MASTER
+ select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
+ select REGMAP_SPI if SPI_MASTER
+ help
+ Enable SC16IS7xx driver on SPI bus,
+ If required say y, and say n to spi if not required,
+ This is additional support to exsisting driver.
+ You must select at least one bus for the driver to be built.
config SERIAL_TIMBERDALE
tristate "Support for timberdale UART"
@@ -1212,7 +1212,7 @@ config SERIAL_ALTERA_UART_CONSOLE
Enable a Altera UART port to be the system console.
config SERIAL_IFX6X60
- tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)"
+ tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)"
depends on GPIOLIB || COMPILE_TEST
depends on SPI && HAS_DMA
help
@@ -1392,19 +1392,19 @@ config SERIAL_FSL_LPUART_CONSOLE
you can make it the console by answering Y to this option.
config SERIAL_FSL_LINFLEXUART
- tristate "Freescale linflexuart serial port support"
+ tristate "Freescale LINFlexD UART serial port support"
depends on PRINTK
select SERIAL_CORE
help
- Support for the on-chip linflexuart on some Freescale SOCs.
+ Support for the on-chip LINFlexD UART on some Freescale SOCs.
config SERIAL_FSL_LINFLEXUART_CONSOLE
- bool "Console on Freescale linflexuart serial port"
+ bool "Console on Freescale LINFlexD UART serial port"
depends on SERIAL_FSL_LINFLEXUART=y
select SERIAL_CORE_CONSOLE
select SERIAL_EARLYCON
help
- If you have enabled the linflexuart serial port on the Freescale
+ If you have enabled the LINFlexD UART serial port on the Freescale
SoCs, you can make it the console by answering Y to this option.
config SERIAL_CONEXANT_DIGICOLOR
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 863f47056539..d056ee6cca33 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -30,7 +30,7 @@ obj-$(CONFIG_SERIAL_PXA_NON8250) += pxa.o
obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
-obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
+obj-$(CONFIG_SERIAL_SAMSUNG) += samsung_tty.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
obj-$(CONFIG_SERIAL_MAX310X) += max310x.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 3a7d1a66f79c..4b28134d596a 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -414,7 +414,7 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
dma_cap_mask_t mask;
uap->dma_probed = true;
- chan = dma_request_slave_channel_reason(dev, "tx");
+ chan = dma_request_chan(dev, "tx");
if (IS_ERR(chan)) {
if (PTR_ERR(chan) == -EPROBE_DEFER) {
uap->dma_probed = false;
@@ -813,10 +813,8 @@ __acquires(&uap->port.lock)
if (!uap->using_tx_dma)
return;
- /* Avoid deadlock with the DMA engine callback */
- spin_unlock(&uap->port.lock);
- dmaengine_terminate_all(uap->dmatx.chan);
- spin_lock(&uap->port.lock);
+ dmaengine_terminate_async(uap->dmatx.chan);
+
if (uap->dmatx.queued) {
dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1,
DMA_TO_DEVICE);
@@ -1236,10 +1234,6 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap)
#else
/* Blank functions if the DMA engine is not available */
-static inline void pl011_dma_probe(struct uart_amba_port *uap)
-{
-}
-
static inline void pl011_dma_remove(struct uart_amba_port *uap)
{
}
diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c
index a32f0d2afd59..205c31a61684 100644
--- a/drivers/tty/serial/fsl_linflexuart.c
+++ b/drivers/tty/serial/fsl_linflexuart.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
- * Freescale linflexuart serial port driver
+ * Freescale LINFlexD UART serial port driver
*
* Copyright 2012-2016 Freescale Semiconductor, Inc.
* Copyright 2017-2019 NXP
@@ -940,5 +940,5 @@ static void __exit linflex_serial_exit(void)
module_init(linflex_serial_init);
module_exit(linflex_serial_exit);
-MODULE_DESCRIPTION("Freescale linflex serial port driver");
+MODULE_DESCRIPTION("Freescale LINFlexD serial port driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 537896c4d887..4e128d19e0ad 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -437,8 +437,8 @@ static void lpuart_dma_tx(struct lpuart_port *sport)
}
sport->dma_tx_desc = dmaengine_prep_slave_sg(sport->dma_tx_chan, sgl,
- sport->dma_tx_nents,
- DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
+ ret, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT);
if (!sport->dma_tx_desc) {
dma_unmap_sg(dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE);
dev_err(dev, "Cannot prepare TX slave DMA!\n");
@@ -1280,6 +1280,57 @@ static int lpuart_config_rs485(struct uart_port *port,
return 0;
}
+static int lpuart32_config_rs485(struct uart_port *port,
+ struct serial_rs485 *rs485)
+{
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
+
+ unsigned long modem = lpuart32_read(&sport->port, UARTMODIR)
+ & ~(UARTMODEM_TXRTSPOL | UARTMODEM_TXRTSE);
+ lpuart32_write(&sport->port, modem, UARTMODIR);
+
+ /* clear unsupported configurations */
+ rs485->delay_rts_before_send = 0;
+ rs485->delay_rts_after_send = 0;
+ rs485->flags &= ~SER_RS485_RX_DURING_TX;
+
+ if (rs485->flags & SER_RS485_ENABLED) {
+ /* Enable auto RS-485 RTS mode */
+ modem |= UARTMODEM_TXRTSE;
+
+ /*
+ * RTS needs to be logic HIGH either during transer _or_ after
+ * transfer, other variants are not supported by the hardware.
+ */
+
+ if (!(rs485->flags & (SER_RS485_RTS_ON_SEND |
+ SER_RS485_RTS_AFTER_SEND)))
+ rs485->flags |= SER_RS485_RTS_ON_SEND;
+
+ if (rs485->flags & SER_RS485_RTS_ON_SEND &&
+ rs485->flags & SER_RS485_RTS_AFTER_SEND)
+ rs485->flags &= ~SER_RS485_RTS_AFTER_SEND;
+
+ /*
+ * The hardware defaults to RTS logic HIGH while transfer.
+ * Switch polarity in case RTS shall be logic HIGH
+ * after transfer.
+ * Note: UART is assumed to be active high.
+ */
+ if (rs485->flags & SER_RS485_RTS_ON_SEND)
+ modem &= ~UARTMODEM_TXRTSPOL;
+ else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
+ modem |= UARTMODEM_TXRTSPOL;
+ }
+
+ /* Store the new configuration */
+ sport->port.rs485 = *rs485;
+
+ lpuart32_write(&sport->port, modem, UARTMODIR);
+ return 0;
+}
+
static unsigned int lpuart_get_mctrl(struct uart_port *port)
{
unsigned int temp = 0;
@@ -1333,18 +1384,7 @@ static void lpuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
static void lpuart32_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- unsigned long temp;
-
- temp = lpuart32_read(port, UARTMODIR) &
- ~(UARTMODIR_RXRTSE | UARTMODIR_TXCTSE);
-
- if (mctrl & TIOCM_RTS)
- temp |= UARTMODIR_RXRTSE;
-
- if (mctrl & TIOCM_CTS)
- temp |= UARTMODIR_TXCTSE;
- lpuart32_write(port, temp, UARTMODIR);
}
static void lpuart_break_ctl(struct uart_port *port, int break_state)
@@ -1889,11 +1929,18 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
ctrl |= UARTCTRL_M;
}
+ /*
+ * When auto RS-485 RTS mode is enabled,
+ * hardware flow control need to be disabled.
+ */
+ if (sport->port.rs485.flags & SER_RS485_ENABLED)
+ termios->c_cflag &= ~CRTSCTS;
+
if (termios->c_cflag & CRTSCTS) {
- modem |= UARTMODEM_RXRTSE | UARTMODEM_TXCTSE;
+ modem |= (UARTMODIR_RXRTSE | UARTMODIR_TXCTSE);
} else {
termios->c_cflag &= ~CRTSCTS;
- modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
+ modem &= ~(UARTMODIR_RXRTSE | UARTMODIR_TXCTSE);
}
if (termios->c_cflag & CSTOPB)
@@ -2416,7 +2463,10 @@ static int lpuart_probe(struct platform_device *pdev)
sport->port.ops = &lpuart_pops;
sport->port.flags = UPF_BOOT_AUTOCONF;
- sport->port.rs485_config = lpuart_config_rs485;
+ if (lpuart_is_32(sport))
+ sport->port.rs485_config = lpuart32_config_rs485;
+ else
+ sport->port.rs485_config = lpuart_config_rs485;
sport->ipg_clk = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(sport->ipg_clk)) {
@@ -2470,7 +2520,7 @@ static int lpuart_probe(struct platform_device *pdev)
sport->port.rs485.delay_rts_after_send)
dev_err(&pdev->dev, "driver doesn't support RTS delays\n");
- lpuart_config_rs485(&sport->port, &sport->port.rs485);
+ sport->port.rs485_config(&sport->port, &sport->port.rs485);
sport->dma_tx_chan = dma_request_slave_channel(sport->port.dev, "tx");
if (!sport->dma_tx_chan)
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index ffefd218761e..31033d517e82 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -1230,6 +1230,9 @@ static int ifx_spi_spi_remove(struct spi_device *spi)
struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi);
/* stop activity */
tasklet_kill(&ifx_dev->io_work_tasklet);
+
+ pm_runtime_disable(&spi->dev);
+
/* free irq */
free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), ifx_dev);
free_irq(gpio_to_irq(ifx_dev->gpio.srdy), ifx_dev);
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 5e08f2657b90..a9e20e6c63ad 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -619,7 +619,7 @@ static void imx_uart_dma_tx(struct imx_port *sport)
dev_err(dev, "DMA mapping error for TX.\n");
return;
}
- desc = dmaengine_prep_slave_sg(chan, sgl, sport->dma_tx_nents,
+ desc = dmaengine_prep_slave_sg(chan, sgl, ret,
DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
if (!desc) {
dma_unmap_sg(dev, sgl, sport->dma_tx_nents,
@@ -1034,8 +1034,6 @@ static void imx_uart_timeout(struct timer_list *t)
}
}
-#define RX_BUF_SIZE (PAGE_SIZE)
-
/*
* There are two kinds of RX DMA interrupts(such as in the MX6Q):
* [1] the RX DMA buffer is full.
@@ -1118,7 +1116,8 @@ static void imx_uart_dma_rx_callback(void *data)
}
/* RX DMA buffer periods */
-#define RX_DMA_PERIODS 4
+#define RX_DMA_PERIODS 16
+#define RX_BUF_SIZE (RX_DMA_PERIODS * PAGE_SIZE / 4)
static int imx_uart_start_rx_dma(struct imx_port *sport)
{
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 3657a24913fc..1cbae0768b1f 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -301,7 +301,7 @@ static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base)
dma = &msm_port->tx_dma;
/* allocate DMA resources, if available */
- dma->chan = dma_request_slave_channel_reason(dev, "tx");
+ dma->chan = dma_request_chan(dev, "tx");
if (IS_ERR(dma->chan))
goto no_tx;
@@ -344,7 +344,7 @@ static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base)
dma = &msm_port->rx_dma;
/* allocate DMA resources, if available */
- dma->chan = dma_request_slave_channel_reason(dev, "rx");
+ dma->chan = dma_request_chan(dev, "rx");
if (IS_ERR(dma->chan))
goto no_rx;
@@ -980,6 +980,7 @@ static unsigned int msm_get_mctrl(struct uart_port *port)
static void msm_reset(struct uart_port *port)
{
struct msm_port *msm_port = UART_TO_MSM(port);
+ unsigned int mr;
/* reset everything */
msm_write(port, UART_CR_CMD_RESET_RX, UART_CR);
@@ -987,7 +988,10 @@ static void msm_reset(struct uart_port *port)
msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR);
msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
- msm_write(port, UART_CR_CMD_SET_RFR, UART_CR);
+ msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR);
+ mr = msm_read(port, UART_MR1);
+ mr &= ~UART_MR1_RX_RDY_CTL;
+ msm_write(port, mr, UART_MR1);
/* Disable DM modes */
if (msm_port->is_uartdm)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 6157213a8359..c16234bca78f 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -233,6 +233,7 @@ struct eg20t_port {
struct dma_chan *chan_rx;
struct scatterlist *sg_tx_p;
int nent;
+ int orig_nent;
struct scatterlist sg_rx;
int tx_dma_use;
void *rx_buf_virt;
@@ -787,9 +788,10 @@ static void pch_dma_tx_complete(void *arg)
}
xmit->tail &= UART_XMIT_SIZE - 1;
async_tx_ack(priv->desc_tx);
- dma_unmap_sg(port->dev, sg, priv->nent, DMA_TO_DEVICE);
+ dma_unmap_sg(port->dev, sg, priv->orig_nent, DMA_TO_DEVICE);
priv->tx_dma_use = 0;
priv->nent = 0;
+ priv->orig_nent = 0;
kfree(priv->sg_tx_p);
pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
}
@@ -1010,6 +1012,7 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__);
return 0;
}
+ priv->orig_nent = num;
priv->nent = nent;
for (i = 0; i < nent; i++, sg++) {
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 14c6306bc462..ff63728a95f4 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -9,10 +9,12 @@
#include <linux/console.h>
#include <linux/io.h>
#include <linux/iopoll.h>
+#include <linux/irq.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
#include <linux/qcom-geni-se.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
@@ -115,6 +117,7 @@ struct qcom_geni_serial_port {
bool brk;
unsigned int tx_remaining;
+ int wakeup_irq;
};
static const struct uart_ops qcom_geni_console_pops;
@@ -754,6 +757,15 @@ out_write_wakeup:
uart_write_wakeup(uport);
}
+static irqreturn_t qcom_geni_serial_wakeup_isr(int isr, void *dev)
+{
+ struct uart_port *uport = dev;
+
+ pm_wakeup_event(uport->dev, 2000);
+
+ return IRQ_HANDLED;
+}
+
static irqreturn_t qcom_geni_serial_isr(int isr, void *dev)
{
u32 m_irq_en;
@@ -830,7 +842,7 @@ static void qcom_geni_serial_shutdown(struct uart_port *uport)
if (uart_console(uport))
console_stop(uport->cons);
- free_irq(uport->irq, uport);
+ disable_irq(uport->irq);
spin_lock_irqsave(&uport->lock, flags);
qcom_geni_serial_stop_tx(uport);
qcom_geni_serial_stop_rx(uport);
@@ -890,21 +902,14 @@ static int qcom_geni_serial_startup(struct uart_port *uport)
int ret;
struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
- scnprintf(port->name, sizeof(port->name),
- "qcom_serial_%s%d",
- (uart_console(uport) ? "console" : "uart"), uport->line);
-
if (!port->setup) {
ret = qcom_geni_serial_port_setup(uport);
if (ret)
return ret;
}
+ enable_irq(uport->irq);
- ret = request_irq(uport->irq, qcom_geni_serial_isr, IRQF_TRIGGER_HIGH,
- port->name, uport);
- if (ret)
- dev_err(uport->dev, "Failed to get IRQ ret %d\n", ret);
- return ret;
+ return 0;
}
static unsigned long get_clk_cfg(unsigned long clk_freq)
@@ -1297,11 +1302,44 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
port->rx_fifo_depth = DEF_FIFO_DEPTH_WORDS;
port->tx_fifo_width = DEF_FIFO_WIDTH_BITS;
+ scnprintf(port->name, sizeof(port->name), "qcom_geni_serial_%s%d",
+ (uart_console(uport) ? "console" : "uart"), uport->line);
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
uport->irq = irq;
+ irq_set_status_flags(uport->irq, IRQ_NOAUTOEN);
+ ret = devm_request_irq(uport->dev, uport->irq, qcom_geni_serial_isr,
+ IRQF_TRIGGER_HIGH, port->name, uport);
+ if (ret) {
+ dev_err(uport->dev, "Failed to get IRQ ret %d\n", ret);
+ return ret;
+ }
+
+ if (!console) {
+ port->wakeup_irq = platform_get_irq(pdev, 1);
+ if (port->wakeup_irq < 0) {
+ dev_err(&pdev->dev, "Failed to get wakeup IRQ %d\n",
+ port->wakeup_irq);
+ } else {
+ irq_set_status_flags(port->wakeup_irq, IRQ_NOAUTOEN);
+ ret = devm_request_irq(uport->dev, port->wakeup_irq,
+ qcom_geni_serial_wakeup_isr,
+ IRQF_TRIGGER_FALLING, "uart_wakeup", uport);
+ if (ret) {
+ dev_err(uport->dev, "Failed to register wakeup IRQ ret %d\n",
+ ret);
+ return ret;
+ }
+
+ device_init_wakeup(&pdev->dev, true);
+ ret = dev_pm_set_wake_irq(&pdev->dev, port->wakeup_irq);
+ if (unlikely(ret))
+ dev_err(uport->dev, "%s:Failed to set IRQ wake:%d\n",
+ __func__, ret);
+ }
+ }
uport->private_data = drv;
platform_set_drvdata(pdev, port);
port->handle_rx = console ? handle_rx_console : handle_rx_uart;
@@ -1324,7 +1362,12 @@ static int __maybe_unused qcom_geni_serial_sys_suspend(struct device *dev)
struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
struct uart_port *uport = &port->uport;
- return uart_suspend_port(uport->private_data, uport);
+ uart_suspend_port(uport->private_data, uport);
+
+ if (port->wakeup_irq > 0)
+ enable_irq(port->wakeup_irq);
+
+ return 0;
}
static int __maybe_unused qcom_geni_serial_sys_resume(struct device *dev)
@@ -1332,6 +1375,9 @@ static int __maybe_unused qcom_geni_serial_sys_resume(struct device *dev)
struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
struct uart_port *uport = &port->uport;
+ if (port->wakeup_irq > 0)
+ disable_irq(port->wakeup_irq);
+
return uart_resume_port(uport->private_data, uport);
}
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung_tty.c
index 83fd51607741..83fd51607741 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung_tty.c
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 2f599515c133..b6ace6290e23 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1122,8 +1122,7 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
int ret;
struct dma_slave_config dma_sconfig;
- dma_chan = dma_request_slave_channel_reason(tup->uport.dev,
- dma_to_memory ? "rx" : "tx");
+ dma_chan = dma_request_chan(tup->uport.dev, dma_to_memory ? "rx" : "tx");
if (IS_ERR(dma_chan)) {
ret = PTR_ERR(dma_chan);
dev_err(tup->uport.dev,
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index c4a414a46c7f..b0a6eb106edb 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1111,7 +1111,7 @@ static int uart_break_ctl(struct tty_struct *tty, int break_state)
if (!uport)
goto out;
- if (uport->type != PORT_UNKNOWN)
+ if (uport->type != PORT_UNKNOWN && uport->ops->break_ctl)
uport->ops->break_ctl(uport, break_state);
ret = 0;
out:
diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h
index 004ca684d3ae..637b09d3fe79 100644
--- a/drivers/tty/serial/sirfsoc_uart.h
+++ b/drivers/tty/serial/sirfsoc_uart.h
@@ -120,7 +120,8 @@ static u32 uart_usp_ff_empty_mask(struct uart_port *port)
empty_bit = ilog2(port->fifosize) + 1;
return (1 << empty_bit);
}
-struct sirfsoc_uart_register sirfsoc_usp = {
+
+static struct sirfsoc_uart_register sirfsoc_usp = {
.uart_reg = {
.sirfsoc_mode1 = 0x0000,
.sirfsoc_mode2 = 0x0004,
@@ -186,7 +187,7 @@ struct sirfsoc_uart_register sirfsoc_usp = {
},
};
-struct sirfsoc_uart_register sirfsoc_uart = {
+static struct sirfsoc_uart_register sirfsoc_uart = {
.uart_reg = {
.sirfsoc_line_ctrl = 0x0040,
.sirfsoc_tx_rx_en = 0x004c,
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index 771d11196523..31df23502562 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -919,6 +919,34 @@ static void sprd_pm(struct uart_port *port, unsigned int state,
}
}
+#ifdef CONFIG_CONSOLE_POLL
+static int sprd_poll_init(struct uart_port *port)
+{
+ if (port->state->pm_state != UART_PM_STATE_ON) {
+ sprd_pm(port, UART_PM_STATE_ON, 0);
+ port->state->pm_state = UART_PM_STATE_ON;
+ }
+
+ return 0;
+}
+
+static int sprd_poll_get_char(struct uart_port *port)
+{
+ while (!(serial_in(port, SPRD_STS1) & SPRD_RX_FIFO_CNT_MASK))
+ cpu_relax();
+
+ return serial_in(port, SPRD_RXD);
+}
+
+static void sprd_poll_put_char(struct uart_port *port, unsigned char ch)
+{
+ while (serial_in(port, SPRD_STS1) & SPRD_TX_FIFO_CNT_MASK)
+ cpu_relax();
+
+ serial_out(port, SPRD_TXD, ch);
+}
+#endif
+
static const struct uart_ops serial_sprd_ops = {
.tx_empty = sprd_tx_empty,
.get_mctrl = sprd_get_mctrl,
@@ -936,6 +964,11 @@ static const struct uart_ops serial_sprd_ops = {
.config_port = sprd_config_port,
.verify_port = sprd_verify_port,
.pm = sprd_pm,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_init = sprd_poll_init,
+ .poll_get_char = sprd_poll_get_char,
+ .poll_put_char = sprd_poll_put_char,
+#endif
};
#ifdef CONFIG_SERIAL_SPRD_CONSOLE
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index df90747ee3a8..2f72514d63ed 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -240,8 +240,8 @@ static void stm32_receive_chars(struct uart_port *port, bool threaded)
* cleared by the sequence [read SR - read DR].
*/
if ((sr & USART_SR_ERR_MASK) && ofs->icr != UNDEF_REG)
- stm32_clr_bits(port, ofs->icr, USART_ICR_ORECF |
- USART_ICR_PECF | USART_ICR_FECF);
+ writel_relaxed(sr & USART_SR_ERR_MASK,
+ port->membase + ofs->icr);
c = stm32_get_char(port, &sr, &stm32_port->last_res);
port->icount.rx++;
@@ -435,7 +435,7 @@ static void stm32_transmit_chars(struct uart_port *port)
if (ofs->icr == UNDEF_REG)
stm32_clr_bits(port, ofs->isr, USART_SR_TC);
else
- stm32_set_bits(port, ofs->icr, USART_ICR_TCCF);
+ writel_relaxed(USART_ICR_TCCF, port->membase + ofs->icr);
if (stm32_port->tx_ch)
stm32_transmit_chars_dma(port);
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 06e79c11141d..7dbd0c471d92 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -22,7 +22,6 @@
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
-#include <linux/pm_runtime.h>
#define ULITE_NAME "ttyUL"
#define ULITE_MAJOR 204
@@ -55,7 +54,6 @@
#define ULITE_CONTROL_RST_TX 0x01
#define ULITE_CONTROL_RST_RX 0x02
#define ULITE_CONTROL_IE 0x10
-#define UART_AUTOSUSPEND_TIMEOUT 3000
/* Static pointer to console port */
#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
@@ -65,7 +63,6 @@ static struct uart_port *console_port;
struct uartlite_data {
const struct uartlite_reg_ops *reg_ops;
struct clk *clk;
- struct uart_driver *ulite_uart_driver;
};
struct uartlite_reg_ops {
@@ -393,12 +390,12 @@ static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser)
static void ulite_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
- if (!state) {
- pm_runtime_get_sync(port->dev);
- } else {
- pm_runtime_mark_last_busy(port->dev);
- pm_runtime_put_autosuspend(port->dev);
- }
+ struct uartlite_data *pdata = port->private_data;
+
+ if (!state)
+ clk_enable(pdata->clk);
+ else
+ clk_disable(pdata->clk);
}
#ifdef CONFIG_CONSOLE_POLL
@@ -697,9 +694,7 @@ static int ulite_release(struct device *dev)
int rc = 0;
if (port) {
- struct uartlite_data *pdata = port->private_data;
-
- rc = uart_remove_one_port(pdata->ulite_uart_driver, port);
+ rc = uart_remove_one_port(&ulite_uart_driver, port);
dev_set_drvdata(dev, NULL);
port->mapbase = 0;
}
@@ -717,11 +712,8 @@ static int __maybe_unused ulite_suspend(struct device *dev)
{
struct uart_port *port = dev_get_drvdata(dev);
- if (port) {
- struct uartlite_data *pdata = port->private_data;
-
- uart_suspend_port(pdata->ulite_uart_driver, port);
- }
+ if (port)
+ uart_suspend_port(&ulite_uart_driver, port);
return 0;
}
@@ -736,41 +728,17 @@ static int __maybe_unused ulite_resume(struct device *dev)
{
struct uart_port *port = dev_get_drvdata(dev);
- if (port) {
- struct uartlite_data *pdata = port->private_data;
-
- uart_resume_port(pdata->ulite_uart_driver, port);
- }
+ if (port)
+ uart_resume_port(&ulite_uart_driver, port);
return 0;
}
-static int __maybe_unused ulite_runtime_suspend(struct device *dev)
-{
- struct uart_port *port = dev_get_drvdata(dev);
- struct uartlite_data *pdata = port->private_data;
-
- clk_disable(pdata->clk);
- return 0;
-};
-
-static int __maybe_unused ulite_runtime_resume(struct device *dev)
-{
- struct uart_port *port = dev_get_drvdata(dev);
- struct uartlite_data *pdata = port->private_data;
-
- clk_enable(pdata->clk);
- return 0;
-}
/* ---------------------------------------------------------------------
* Platform bus binding
*/
-static const struct dev_pm_ops ulite_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(ulite_suspend, ulite_resume)
- SET_RUNTIME_PM_OPS(ulite_runtime_suspend,
- ulite_runtime_resume, NULL)
-};
+static SIMPLE_DEV_PM_OPS(ulite_pm_ops, ulite_suspend, ulite_resume);
#if defined(CONFIG_OF)
/* Match table for of_platform binding */
@@ -795,22 +763,6 @@ static int ulite_probe(struct platform_device *pdev)
if (prop)
id = be32_to_cpup(prop);
#endif
- if (id < 0) {
- /* Look for a serialN alias */
- id = of_alias_get_id(pdev->dev.of_node, "serial");
- if (id < 0)
- id = 0;
- }
-
- if (!ulite_uart_driver.state) {
- dev_dbg(&pdev->dev, "uartlite: calling uart_register_driver()\n");
- ret = uart_register_driver(&ulite_uart_driver);
- if (ret < 0) {
- dev_err(&pdev->dev, "Failed to register driver\n");
- return ret;
- }
- }
-
pdata = devm_kzalloc(&pdev->dev, sizeof(struct uartlite_data),
GFP_KERNEL);
if (!pdata)
@@ -836,22 +788,24 @@ static int ulite_probe(struct platform_device *pdev)
pdata->clk = NULL;
}
- pdata->ulite_uart_driver = &ulite_uart_driver;
ret = clk_prepare_enable(pdata->clk);
if (ret) {
dev_err(&pdev->dev, "Failed to prepare clock\n");
return ret;
}
- pm_runtime_use_autosuspend(&pdev->dev);
- pm_runtime_set_autosuspend_delay(&pdev->dev, UART_AUTOSUSPEND_TIMEOUT);
- pm_runtime_set_active(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
+ if (!ulite_uart_driver.state) {
+ dev_dbg(&pdev->dev, "uartlite: calling uart_register_driver()\n");
+ ret = uart_register_driver(&ulite_uart_driver);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to register driver\n");
+ return ret;
+ }
+ }
ret = ulite_assign(&pdev->dev, id, res->start, irq, pdata);
- pm_runtime_mark_last_busy(&pdev->dev);
- pm_runtime_put_autosuspend(&pdev->dev);
+ clk_disable(pdata->clk);
return ret;
}
@@ -860,14 +814,9 @@ static int ulite_remove(struct platform_device *pdev)
{
struct uart_port *port = dev_get_drvdata(&pdev->dev);
struct uartlite_data *pdata = port->private_data;
- int rc;
- clk_unprepare(pdata->clk);
- rc = ulite_release(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
- pm_runtime_set_suspended(&pdev->dev);
- pm_runtime_dont_use_autosuspend(&pdev->dev);
- return rc;
+ clk_disable_unprepare(pdata->clk);
+ return ulite_release(&pdev->dev);
}
/* work with hotplug and coldplug */
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index a81807b394d1..d9f54c7d94f2 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1345,9 +1345,12 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
if (!tty->port)
tty->port = driver->ports[idx];
- WARN_RATELIMIT(!tty->port,
- "%s: %s driver does not set tty->port. This will crash the kernel later. Fix the driver!\n",
- __func__, tty->driver->name);
+ if (WARN_RATELIMIT(!tty->port,
+ "%s: %s driver does not set tty->port. This would crash the kernel. Fix the driver!\n",
+ __func__, tty->driver->name)) {
+ retval = -EINVAL;
+ goto err_release_lock;
+ }
retval = tty_ldisc_lock(tty, 5 * HZ);
if (retval)
@@ -1925,7 +1928,6 @@ EXPORT_SYMBOL_GPL(tty_kopen);
/**
* tty_open_by_driver - open a tty device
* @device: dev_t of device to open
- * @inode: inode of device file
* @filp: file pointer to tty
*
* Performs the driver lookup, checks for a reopen, or otherwise
@@ -1938,7 +1940,7 @@ EXPORT_SYMBOL_GPL(tty_kopen);
* - concurrent tty driver removal w/ lookup
* - concurrent tty removal from driver table
*/
-static struct tty_struct *tty_open_by_driver(dev_t device, struct inode *inode,
+static struct tty_struct *tty_open_by_driver(dev_t device,
struct file *filp)
{
struct tty_struct *tty;
@@ -2030,7 +2032,7 @@ retry_open:
tty = tty_open_current_tty(device, filp);
if (!tty)
- tty = tty_open_by_driver(device, inode, filp);
+ tty = tty_open_by_driver(device, filp);
if (IS_ERR(tty)) {
tty_free_file(filp);
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 4c49f53afa3e..ec1f6a48121e 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -156,12 +156,7 @@ static void put_ldops(struct tty_ldisc_ops *ldops)
* takes tty_ldiscs_lock to guard against ldisc races
*/
-#if defined(CONFIG_LDISC_AUTOLOAD)
- #define INITIAL_AUTOLOAD_STATE 1
-#else
- #define INITIAL_AUTOLOAD_STATE 0
-#endif
-static int tty_ldisc_autoload = INITIAL_AUTOLOAD_STATE;
+static int tty_ldisc_autoload = IS_BUILTIN(CONFIG_LDISC_AUTOLOAD);
static struct tty_ldisc *tty_ldisc_get(struct tty_struct *tty, int disc)
{
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 515fc095e3b4..15d33fa0c925 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -1491,7 +1491,7 @@ static void kbd_event(struct input_handle *handle, unsigned int event_type,
if (event_type == EV_MSC && event_code == MSC_RAW && HW_RAW(handle->dev))
kbd_rawcode(value);
- if (event_type == EV_KEY)
+ if (event_type == EV_KEY && event_code <= KEY_MAX)
kbd_keycode(event_code, value, HW_RAW(handle->dev));
spin_unlock(&kbd_event_lock);
diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c
index 1f042346e722..778f83ea2249 100644
--- a/drivers/tty/vt/vc_screen.c
+++ b/drivers/tty/vt/vc_screen.c
@@ -456,6 +456,9 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
size_t ret;
char *con_buf;
+ if (use_unicode(inode))
+ return -EOPNOTSUPP;
+
con_buf = (char *) __get_free_page(GFP_KERNEL);
if (!con_buf)
return -ENOMEM;
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index e7fe550b6038..8ec3dd742ea4 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -290,7 +290,7 @@
/* Sunix UART */
#define PORT_SUNIX 121
-/* Freescale Linflex UART */
+/* Freescale LINFlexD UART */
#define PORT_LINFLEXUART 122
#endif /* _UAPILINUX_SERIAL_CORE_H */