diff options
| -rw-r--r-- | Documentation/DocBook/gpu.tmpl | 2 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_bios.c | 4 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_bios.h | 861 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_vbt_defs.h | 826 |
4 files changed, 865 insertions, 828 deletions
diff --git a/Documentation/DocBook/gpu.tmpl b/Documentation/DocBook/gpu.tmpl index 1692c4dd5487..ab7ffebf4b95 100644 --- a/Documentation/DocBook/gpu.tmpl +++ b/Documentation/DocBook/gpu.tmpl @@ -3334,7 +3334,7 @@ int num_ioctls;</synopsis> <title>Video BIOS Table (VBT)</title> !Pdrivers/gpu/drm/i915/intel_bios.c Video BIOS Table (VBT) !Idrivers/gpu/drm/i915/intel_bios.c -!Idrivers/gpu/drm/i915/intel_bios.h +!Idrivers/gpu/drm/i915/intel_vbt_defs.h </sect2> </sect1> diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index aa90dc662e7f..083003b015f5 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -29,7 +29,9 @@ #include <drm/drmP.h> #include <drm/i915_drm.h> #include "i915_drv.h" -#include "intel_bios.h" + +#define _INTEL_BIOS_PRIVATE +#include "intel_vbt_defs.h" /** * DOC: Video BIOS Table (VBT) diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h index 350d4e0f75a4..ab0ea315eddb 100644 --- a/drivers/gpu/drm/i915/intel_bios.h +++ b/drivers/gpu/drm/i915/intel_bios.h @@ -1,5 +1,5 @@ /* - * Copyright © 2006 Intel Corporation + * Copyright © 2016 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), @@ -19,543 +19,16 @@ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * Authors: - * Eric Anholt <eric@anholt.net> - * - */ - -#ifndef _INTEL_BIOS_H_ -#define _INTEL_BIOS_H_ - -/** - * struct vbt_header - VBT Header structure - * @signature: VBT signature, always starts with "$VBT" - * @version: Version of this structure - * @header_size: Size of this structure - * @vbt_size: Size of VBT (VBT Header, BDB Header and data blocks) - * @vbt_checksum: Checksum - * @reserved0: Reserved - * @bdb_offset: Offset of &struct bdb_header from beginning of VBT - * @aim_offset: Offsets of add-in data blocks from beginning of VBT - */ -struct vbt_header { - u8 signature[20]; - u16 version; - u16 header_size; - u16 vbt_size; - u8 vbt_checksum; - u8 reserved0; - u32 bdb_offset; - u32 aim_offset[4]; -} __packed; - -/** - * struct bdb_header - BDB Header structure - * @signature: BDB signature "BIOS_DATA_BLOCK" - * @version: Version of the data block definitions - * @header_size: Size of this structure - * @bdb_size: Size of BDB (BDB Header and data blocks) - */ -struct bdb_header { - u8 signature[16]; - u16 version; - u16 header_size; - u16 bdb_size; -} __packed; - -/* strictly speaking, this is a "skip" block, but it has interesting info */ -struct vbios_data { - u8 type; /* 0 == desktop, 1 == mobile */ - u8 relstage; - u8 chipset; - u8 lvds_present:1; - u8 tv_present:1; - u8 rsvd2:6; /* finish byte */ - u8 rsvd3[4]; - u8 signon[155]; - u8 copyright[61]; - u16 code_segment; - u8 dos_boot_mode; - u8 bandwidth_percent; - u8 rsvd4; /* popup memory size */ - u8 resize_pci_bios; - u8 rsvd5; /* is crt already on ddc2 */ -} __packed; - -/* - * There are several types of BIOS data blocks (BDBs), each block has - * an ID and size in the first 3 bytes (ID in first, size in next 2). - * Known types are listed below. */ -#define BDB_GENERAL_FEATURES 1 -#define BDB_GENERAL_DEFINITIONS 2 -#define BDB_OLD_TOGGLE_LIST 3 -#define BDB_MODE_SUPPORT_LIST 4 -#define BDB_GENERIC_MODE_TABLE 5 -#define BDB_EXT_MMIO_REGS 6 -#define BDB_SWF_IO 7 -#define BDB_SWF_MMIO 8 -#define BDB_PSR 9 -#define BDB_MODE_REMOVAL_TABLE 10 -#define BDB_CHILD_DEVICE_TABLE 11 -#define BDB_DRIVER_FEATURES 12 -#define BDB_DRIVER_PERSISTENCE 13 -#define BDB_EXT_TABLE_PTRS 14 -#define BDB_DOT_CLOCK_OVERRIDE 15 -#define BDB_DISPLAY_SELECT 16 -/* 17 rsvd */ -#define BDB_DRIVER_ROTATION 18 -#define BDB_DISPLAY_REMOVE 19 -#define BDB_OEM_CUSTOM 20 -#define BDB_EFP_LIST 21 /* workarounds for VGA hsync/vsync */ -#define BDB_SDVO_LVDS_OPTIONS 22 -#define BDB_SDVO_PANEL_DTDS 23 -#define BDB_SDVO_LVDS_PNP_IDS 24 -#define BDB_SDVO_LVDS_POWER_SEQ 25 -#define BDB_TV_OPTIONS 26 -#define BDB_EDP 27 -#define BDB_LVDS_OPTIONS 40 -#define BDB_LVDS_LFP_DATA_PTRS 41 -#define BDB_LVDS_LFP_DATA 42 -#define BDB_LVDS_BACKLIGHT 43 -#define BDB_LVDS_POWER 44 -#define BDB_MIPI_CONFIG 52 -#define BDB_MIPI_SEQUENCE 53 -#define BDB_SKIP 254 /* VBIOS private block, ignore */ - -struct bdb_general_features { - /* bits 1 */ - u8 panel_fitting:2; - u8 flexaim:1; - u8 msg_enable:1; - u8 clear_screen:3; - u8 color_flip:1; - - /* bits 2 */ - u8 download_ext_vbt:1; - u8 enable_ssc:1; - u8 ssc_freq:1; - u8 enable_lfp_on_override:1; - u8 disable_ssc_ddt:1; - u8 rsvd7:1; - u8 display_clock_mode:1; - u8 rsvd8:1; /* finish byte */ - - /* bits 3 */ - u8 disable_smooth_vision:1; - u8 single_dvi:1; - u8 rsvd9:1; - u8 fdi_rx_polarity_inverted:1; - u8 rsvd10:4; /* finish byte */ - - /* bits 4 */ - u8 legacy_monitor_detect; - - /* bits 5 */ - u8 int_crt_support:1; - u8 int_tv_support:1; - u8 int_efp_support:1; - u8 dp_ssc_enb:1; /* PCH attached eDP supports SSC */ - u8 dp_ssc_freq:1; /* SSC freq for PCH attached eDP */ - u8 rsvd11:3; /* finish byte */ -} __packed; - -/* pre-915 */ -#define GPIO_PIN_DVI_LVDS 0x03 /* "DVI/LVDS DDC GPIO pins" */ -#define GPIO_PIN_ADD_I2C 0x05 /* "ADDCARD I2C GPIO pins" */ -#define GPIO_PIN_ADD_DDC 0x04 /* "ADDCARD DDC GPIO pins" */ -#define GPIO_PIN_ADD_DDC_I2C 0x06 /* "ADDCARD DDC/I2C GPIO pins" */ - -/* Pre 915 */ -#define DEVICE_TYPE_NONE 0x00 -#define DEVICE_TYPE_CRT 0x01 -#define DEVICE_TYPE_TV 0x09 -#define DEVICE_TYPE_EFP 0x12 -#define DEVICE_TYPE_LFP 0x22 -/* On 915+ */ -#define DEVICE_TYPE_CRT_DPMS 0x6001 -#define DEVICE_TYPE_CRT_DPMS_HOTPLUG 0x4001 -#define DEVICE_TYPE_TV_COMPOSITE 0x0209 -#define DEVICE_TYPE_TV_MACROVISION 0x0289 -#define DEVICE_TYPE_TV_RF_COMPOSITE 0x020c -#define DEVICE_TYPE_TV_SVIDEO_COMPOSITE 0x0609 -#define DEVICE_TYPE_TV_SCART 0x0209 -#define DEVICE_TYPE_TV_CODEC_HOTPLUG_PWR 0x6009 -#define DEVICE_TYPE_EFP_HOTPLUG_PWR 0x6012 -#define DEVICE_TYPE_EFP_DVI_HOTPLUG_PWR 0x6052 -#define DEVICE_TYPE_EFP_DVI_I 0x6053 -#define DEVICE_TYPE_EFP_DVI_D_DUAL 0x6152 -#define DEVICE_TYPE_EFP_DVI_D_HDCP 0x60d2 -#define DEVICE_TYPE_OPENLDI_HOTPLUG_PWR 0x6062 -#define DEVICE_TYPE_OPENLDI_DUALPIX 0x6162 -#define DEVICE_TYPE_LFP_PANELLINK 0x5012 -#define DEVICE_TYPE_LFP_CMOS_PWR 0x5042 -#define DEVICE_TYPE_LFP_LVDS_PWR 0x5062 -#define DEVICE_TYPE_LFP_LVDS_DUAL 0x5162 -#define DEVICE_TYPE_LFP_LVDS_DUAL_HDCP 0x51e2 - -#define DEVICE_CFG_NONE 0x00 -#define DEVICE_CFG_12BIT_DVOB 0x01 -#define DEVICE_CFG_12BIT_DVOC 0x02 -#define DEVICE_CFG_24BIT_DVOBC 0x09 -#define DEVICE_CFG_24BIT_DVOCB 0x0a -#define DEVICE_CFG_DUAL_DVOB 0x11 -#define DEVICE_CFG_DUAL_DVOC 0x12 -#define DEVICE_CFG_DUAL_DVOBC 0x13 -#define DEVICE_CFG_DUAL_LINK_DVOBC 0x19 -#define DEVICE_CFG_DUAL_LINK_DVOCB 0x1a - -#define DEVICE_WIRE_NONE 0x00 -#define DEVICE_WIRE_DVOB 0x01 -#define DEVICE_WIRE_DVOC 0x02 -#define DEVICE_WIRE_DVOBC 0x03 -#define DEVICE_WIRE_DVOBB 0x05 -#define DEVICE_WIRE_DVOCC 0x06 -#define DEVICE_WIRE_DVOB_MASTER 0x0d -#define DEVICE_WIRE_DVOC_MASTER 0x0e - -#define DEVICE_PORT_DVOA 0x00 /* none on 845+ */ -#define DEVICE_PORT_DVOB 0x01 -#define DEVICE_PORT_DVOC 0x02 /* - * We used to keep this struct but without any version control. We should avoid - * using it in the future, but it should be safe to keep using it in the old - * code. Do not change; we rely on its size. + * Please use intel_vbt_defs.h for VBT private data, to hide and abstract away + * the VBT from the rest of the driver. Add the parsed, clean data to struct + * intel_vbt_data within struct drm_i915_private. */ -struct old_child_dev_config { - u16 handle; - u16 device_type; - u8 device_id[10]; /* ascii string */ - u16 addin_offset; - u8 dvo_port; /* See Device_PORT_* above */ - u8 i2c_pin; - u8 slave_addr; - u8 ddc_pin; - u16 edid_ptr; - u8 dvo_cfg; /* See DEVICE_CFG_* above */ - u8 dvo2_port; - u8 i2c2_pin; - u8 slave2_addr; - u8 ddc2_pin; - u8 capabilities; - u8 dvo_wiring;/* See DEVICE_WIRE_* above */ - u8 dvo2_wiring; - u16 extended_type; - u8 dvo_function; -} __packed; - -/* This one contains field offsets that are known to be common for all BDB - * versions. Notice that the meaning of the contents contents may still change, - * but at least the offsets are consistent. */ - -/* Definitions for flags_1 */ -#define IBOOST_ENABLE (1<<3) - -struct common_child_dev_config { - u16 handle; - u16 device_type; - u8 not_common1[12]; - u8 dvo_port; - u8 not_common2[2]; - u8 ddc_pin; - u16 edid_ptr; - u8 obsolete; - u8 flags_1; - u8 not_common3[13]; - u8 iboost_level; -} __packed; - - -/* This field changes depending on the BDB version, so the most reliable way to - * read it is by checking the BDB version and reading the raw pointer. */ -union child_device_config { - /* This one is safe to be used anywhere, but the code should still check - * the BDB version. */ - u8 raw[33]; - /* This one should only be kept for legacy code. */ - struct old_child_dev_config old; - /* This one should also be safe to use anywhere, even without version - * checks. */ - struct common_child_dev_config common; -} __packed; - -struct bdb_general_definitions { - /* DDC GPIO */ - u8 crt_ddc_gmbus_pin; - - /* DPMS bits */ - u8 dpms_acpi:1; - u8 skip_boot_crt_detect:1; - u8 dpms_aim:1; - u8 rsvd1:5; /* finish byte */ - - /* boot device bits */ - u8 boot_display[2]; - u8 child_dev_size; - - /* - * Device info: - * If TV is present, it'll be at devices[0]. - * LVDS will be next, either devices[0] or [1], if present. - * On some platforms the number of device is 6. But could be as few as - * 4 if both TV and LVDS are missing. - * And the device num is related with the size of general definition - * block. It is obtained by using the following formula: - * number = (block_size - sizeof(bdb_general_definitions))/ - * defs->child_dev_size; - */ - uint8_t devices[0]; -} __packed; - -/* Mask for DRRS / Panel Channel / SSC / BLT control bits extraction */ -#define MODE_MASK 0x3 - -struct bdb_lvds_options { - u8 panel_type; - u8 rsvd1; - /* LVDS capabilities, stored in a dword */ - u8 pfit_mode:2; - u8 pfit_text_mode_enhanced:1; - u8 pfit_gfx_mode_enhanced:1; - u8 pfit_ratio_auto:1; - u8 pixel_dither:1; - u8 lvds_edid:1; - u8 rsvd2:1; - u8 rsvd4; - /* LVDS Panel channel bits stored here */ - u32 lvds_panel_channel_bits; - /* LVDS SSC (Spread Spectrum Clock) bits stored here. */ - u16 ssc_bits; - u16 ssc_freq; - u16 ssc_ddt; - /* Panel color depth defined here */ - u16 panel_color_depth; - /* LVDS panel type bits stored here */ - u32 dps_panel_type_bits; - /* LVDS backlight control type bits stored here */ - u32 blt_control_type_bits; -} __packed; - -/* LFP pointer table contains entries to the struct below */ -struct bdb_lvds_lfp_data_ptr { - u16 fp_timing_offset; /* offsets are from start of bdb */ - u8 fp_table_size; - u16 dvo_timing_offset; - u8 dvo_table_size; - u16 panel_pnp_id_offset; - u8 pnp_table_size; -} __packed; - -struct bdb_lvds_lfp_data_ptrs { - u8 lvds_entries; /* followed by one or more lvds_data_ptr structs */ - struct bdb_lvds_lfp_data_ptr ptr[16]; -} __packed; - -/* LFP data has 3 blocks per entry */ -struct lvds_fp_timing { - u16 x_res; - u16 y_res; - u32 lvds_reg; - u32 lvds_reg_val; - u32 pp_on_reg; - u32 pp_on_reg_val; - u32 pp_off_reg; - u32 pp_off_reg_val; - u32 pp_cycle_reg; - u32 pp_cycle_reg_val; - u32 pfit_reg; - u32 pfit_reg_val; - u16 terminator; -} __packed; - -struct lvds_dvo_timing { - u16 clock; /**< In 10khz */ - u8 hactive_lo; - u8 hblank_lo; - u8 hblank_hi:4; - u8 hactive_hi:4; - u8 vactive_lo; - u8 vblank_lo; - u8 vblank_hi:4; - u8 vactive_hi:4; - u8 hsync_off_lo; - u8 hsync_pulse_width; - u8 vsync_pulse_width:4; - u8 vsync_off:4; - u8 rsvd0:6; - u8 hsync_off_hi:2; - u8 h_image; - u8 v_image; - u8 max_hv; - u8 h_border; - u8 v_border; - u8 rsvd1:3; - u8 digital:2; - u8 vsync_positive:1; - u8 hsync_positive:1; - u8 rsvd2:1; -} __packed; - -struct lvds_pnp_id { - u16 mfg_name; - u16 product_code; - u32 serial; - u8 mfg_week; - u8 mfg_year; -} __packed; - -struct bdb_lvds_lfp_data_entry { - struct lvds_fp_timing fp_timing; - struct lvds_dvo_timing dvo_timing; - struct lvds_pnp_id pnp_id; -} __packed; - -struct bdb_lvds_lfp_data { - struct bdb_lvds_lfp_data_entry data[16]; -} __packed; - -#define BDB_BACKLIGHT_TYPE_NONE 0 -#define BDB_BACKLIGHT_TYPE_PWM 2 - -struct bdb_lfp_backlight_data_entry { - u8 type:2; - u8 active_low_pwm:1; - u8 obsolete1:5; - u16 pwm_freq_hz; - u8 min_brightness; - u8 obsolete2; - u8 obsolete3; -} __packed; - -struct bdb_lfp_backlight_data { - u8 entry_size; - struct bdb_lfp_backlight_data_entry data[16]; - u8 level[16]; -} __packed; - -struct aimdb_header { - char signature[16]; - char oem_device[20]; - u16 aimdb_version; - u16 aimdb_header_size; - u16 aimdb_size; -} __packed; - -struct aimdb_block { - u8 aimdb_id; - u16 aimdb_size; -} __packed; -struct vch_panel_data { - u16 fp_timing_offset; - u8 fp_timing_size; - u16 dvo_timing_offset; - u8 dvo_timing_size; - u16 text_fitting_offset; - u8 text_fitting_size; - u16 graphics_fitting_offset; - u8 graphics_fitting_size; -} __packed; - -struct vch_bdb_22 { - struct aimdb_block aimdb_block; - struct vch_panel_data panels[16]; -} __packed; - -struct bdb_sdvo_lvds_options { - u8 panel_backlight; - u8 h40_set_panel_type; - u8 panel_type; - u8 ssc_clk_freq; - u16 als_low_trip; - u16 als_high_trip; - u8 sclalarcoeff_tab_row_num; - u8 sclalarcoeff_tab_row_size; - u8 coefficient[8]; - u8 panel_misc_bits_1; - u8 panel_misc_bits_2; - u8 panel_misc_bits_3; - u8 panel_misc_bits_4; -} __packed; - - -#define BDB_DRIVER_FEATURE_NO_LVDS 0 -#define BDB_DRIVER_FEATURE_INT_LVDS 1 -#define BDB_DRIVER_FEATURE_SDVO_LVDS 2 -#define BDB_DRIVER_FEATURE_EDP 3 - -struct bdb_driver_features { - u8 boot_dev_algorithm:1; - u8 block_display_switch:1; - u8 allow_display_switch:1; - u8 hotplug_dvo:1; - u8 dual_view_zoom:1; - u8 int15h_hook:1; - u8 sprite_in_clone:1; - u8 primary_lfp_id:1; - - u16 boot_mode_x; - u16 boot_mode_y; - u8 boot_mode_bpp; - u8 boot_mode_refresh; - - u16 enable_lfp_primary:1; - u16 selective_mode_pruning:1; - u16 dual_frequency:1; - u16 render_clock_freq:1; /* 0: high freq; 1: low freq */ - u16 nt_clone_support:1; - u16 power_scheme_ui:1; /* 0: CUI; 1: 3rd party */ - u16 sprite_display_assign:1; /* 0: secondary; 1: primary */ - u16 cui_aspect_scaling:1; - u16 preserve_aspect_ratio:1; - u16 sdvo_device_power_down:1; - u16 crt_hotplug:1; - u16 lvds_config:2; - u16 tv_hotplug:1; - u16 hdmi_config:2; - - u8 static_display:1; - u8 reserved2:7; - u16 legacy_crt_max_x; - u16 legacy_crt_max_y; - u8 legacy_crt_max_refresh; - - u8 hdmi_termination; - u8 custom_vbt_version; - /* Driver features data block */ - u16 rmpm_enabled:1; - u16 s2ddt_enabled:1; - u16 dpst_enabled:1; - u16 bltclt_enabled:1; - u16 adb_enabled:1; - u16 drrs_enabled:1; - u16 grs_enabled:1; - u16 gpmt_enabled:1; - u16 tbt_enabled:1; - u16 psr_enabled:1; - u16 ips_enabled:1; - u16 reserved3:4; - u16 pc_feature_valid:1; -} __packed; - -#define EDP_18BPP 0 -#define EDP_24BPP 1 -#define EDP_30BPP 2 -#define EDP_RATE_1_62 0 -#define EDP_RATE_2_7 1 -#define EDP_LANE_1 0 -#define EDP_LANE_2 1 -#define EDP_LANE_4 3 -#define EDP_PREEMPHASIS_NONE 0 -#define EDP_PREEMPHASIS_3_5dB 1 -#define EDP_PREEMPHASIS_6dB 2 -#define EDP_PREEMPHASIS_9_5dB 3 -#define EDP_VSWING_0_4V 0 -#define EDP_VSWING_0_6V 1 -#define EDP_VSWING_0_8V 2 -#define EDP_VSWING_1_2V 3 +#ifndef _INTEL_BIOS_H_ +#define _INTEL_BIOS_H_ struct edp_power_seq { u16 t1_t3; @@ -565,245 +38,37 @@ struct edp_power_seq { u16 t11_t12; } __packed; -struct edp_link_params { - u8 rate:4; - u8 lanes:4; - u8 preemphasis:4; - u8 vswing:4; -} __packed; - -struct bdb_edp { - struct edp_power_seq power_seqs[16]; - u32 color_depth; - struct edp_link_params link_params[16]; - u32 sdrrs_msa_timing_delay; - - /* ith bit indicates enabled/disabled for (i+1)th panel */ - u16 edp_s3d_feature; - u16 edp_t3_optimization; - u64 edp_vswing_preemph; /* v173 */ -} __packed; - -struct psr_table { - /* Feature bits */ - u8 full_link:1; - u8 require_aux_to_wakeup:1; - u8 feature_bits_rsvd:6; - - /* Wait times */ - u8 idle_frames:4; - u8 lines_to_wait:3; - u8 wait_times_rsvd:1; - - /* TP wake up time in multiple of 100 */ - u16 tp1_wakeup_time; - u16 tp2_tp3_wakeup_time; -} __packed; - -struct bdb_psr { - struct psr_table psr_table[16]; -} __packed; - -/* - * Driver<->VBIOS interaction occurs through scratch bits in - * GR18 & SWF*. - */ - -/* GR18 bits are set on display switch and hotkey events */ -#define GR18_DRIVER_SWITCH_EN (1<<7) /* 0: VBIOS control, 1: driver control */ -#define GR18_HOTKEY_MASK 0x78 /* See also SWF4 15:0 */ -#define GR18_HK_NONE (0x0<<3) -#define GR18_HK_LFP_STRETCH (0x1<<3) -#define GR18_HK_TOGGLE_DISP (0x2<<3) -#define GR18_HK_DISP_SWITCH (0x4<<3) /* see SWF14 15:0 for what to enable */ -#define GR18_HK_POPUP_DISABLED (0x6<<3) -#define GR18_HK_POPUP_ENABLED (0x7<<3) -#define GR18_HK_PFIT (0x8<<3) -#define GR18_HK_APM_CHANGE (0xa<<3) -#define GR18_HK_MULTIPLE (0xc<<3) -#define GR18_USER_INT_EN (1<<2) -#define GR18_A0000_FLUSH_EN (1<<1) -#define GR18_SMM_EN (1<<0) - -/* Set by driver, cleared by VBIOS */ -#define SWF00_YRES_SHIFT 16 -#define SWF00_XRES_SHIFT 0 -#define SWF00_RES_MASK 0xffff - -/* Set by VBIOS at boot time and driver at runtime */ -#define SWF01_TV2_FORMAT_SHIFT 8 -#define SWF01_TV1_FORMAT_SHIFT 0 -#define SWF01_TV_FORMAT_MASK 0xffff - -#define SWF10_VBIOS_BLC_I2C_EN (1<<29) -#define SWF10_GTT_OVERRIDE_EN (1<<28) -#define SWF10_LFP_DPMS_OVR (1<<27) /* override DPMS on display switch */ -#define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24) -#define SWF10_OLD_TOGGLE 0x0 -#define SWF10_TOGGLE_LIST_1 0x1 -#define SWF10_TOGGLE_LIST_2 0x2 -#define SWF10_TOGGLE_LIST_3 0x3 -#define SWF10_TOGGLE_LIST_4 0x4 -#define SWF10_PANNING_EN (1<<23) -#define SWF10_DRIVER_LOADED (1<<22) -#define SWF10_EXTENDED_DESKTOP (1<<21) -#define SWF10_EXCLUSIVE_MODE (1<<20) -#define SWF10_OVERLAY_EN (1<<19) -#define SWF10_PLANEB_HOLDOFF (1<<18) -#define SWF10_PLANEA_HOLDOFF (1<<17) -#define SWF10_VGA_HOLDOFF (1<<16) -#define SWF10_ACTIVE_DISP_MASK 0xffff -#define SWF10_PIPEB_LFP2 (1<<15) -#define SWF10_PIPEB_EFP2 (1<<14) -#define SWF10_PIPEB_TV2 (1<<13) -#define SWF10_PIPEB_CRT2 (1<<12) -#define SWF10_PIPEB_LFP (1<<11) -#define SWF10_PIPEB_EFP (1<<10) -#define SWF10_PIPEB_TV (1<<9) -#define SWF10_PIPEB_CRT (1<<8) -#define SWF10_PIPEA_LFP2 (1<<7) -#define SWF10_PIPEA_EFP2 (1<<6) -#define SWF10_PIPEA_TV2 (1<<5) -#define SWF10_PIPEA_CRT2 (1<<4) -#define SWF10_PIPEA_LFP (1<<3) -#define SWF10_PIPEA_EFP (1<<2) -#define SWF10_PIPEA_TV (1<<1) -#define SWF10_PIPEA_CRT (1<<0) - -#define SWF11_MEMORY_SIZE_SHIFT 16 -#define SWF11_SV_TEST_EN (1<<15) -#define SWF11_IS_AGP (1<<14) -#define SWF11_DISPLAY_HOLDOFF (1<<13) -#define SWF11_DPMS_REDUCED (1<<12) -#define SWF11_IS_VBE_MODE (1<<11) -#define SWF11_PIPEB_ACCESS (1<<10) /* 0 here means pipe a */ -#define SWF11_DPMS_MASK 0x07 -#define SWF11_DPMS_OFF (1<<2) -#define SWF11_DPMS_SUSPEND (1<<1) -#define SWF11_DPMS_STANDBY (1<<0) -#define SWF11_DPMS_ON 0 - -#define SWF14_GFX_PFIT_EN (1<<31) -#define SWF14_TEXT_PFIT_EN (1<<30) -#define SWF14_LID_STATUS_CLOSED (1<<29) /* 0 here means open */ -#define SWF14_POPUP_EN (1<<28) -#define SWF14_DISPLAY_HOLDOFF (1<<27) -#define SWF14_DISP_DETECT_EN (1<<26) -#define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */ -#define SWF14_DRIVER_STATUS (1<<24) -#define SWF14_OS_TYPE_WIN9X (1<<23) -#define SWF14_OS_TYPE_WINNT (1<<22) -/* 21:19 rsvd */ -#define SWF14_PM_TYPE_MASK 0x00070000 -#define SWF14_PM_ACPI_VIDEO (0x4 << 16) -#define SWF14_PM_ACPI (0x3 << 16) -#define SWF14_PM_APM_12 (0x2 << 16) -#define SWF14_PM_APM_11 (0x1 << 16) -#define SWF14_HK_REQUEST_MASK 0x0000ffff /* see GR18 6:3 for event type */ - /* if GR18 indicates a display switch */ -#define SWF14_DS_PIPEB_LFP2_EN (1<<15) -#define SWF14_DS_PIPEB_EFP2_EN (1<<14) -#define SWF14_DS_PIPEB_TV2_EN (1<<13) -#define SWF14_DS_PIPEB_CRT2_EN (1<<12) -#define SWF14_DS_PIPEB_LFP_EN (1<<11) -#define SWF14_DS_PIPEB_EFP_EN (1<<10) -#define SWF14_DS_PIPEB_TV_EN (1<<9) -#define SWF14_DS_PIPEB_CRT_EN (1<<8) -#define SWF14_DS_PIPEA_LFP2_EN (1<<7) -#define SWF14_DS_PIPEA_EFP2_EN (1<<6) -#define SWF14_DS_PIPEA_TV2_EN (1<<5) -#define SWF14_DS_PIPEA_CRT2_EN (1<<4) -#define SWF14_DS_PIPEA_LFP_EN (1<<3) -#define SWF14_DS_PIPEA_EFP_EN (1<<2) -#define SWF14_DS_PIPEA_TV_EN (1<<1) -#define SWF14_DS_PIPEA_CRT_EN (1<<0) - /* if GR18 indicates a panel fitting request */ -#define SWF14_PFIT_EN (1<<0) /* 0 means disable */ - /* if GR18 indicates an APM change request */ -#define SWF14_APM_HIBERNATE 0x4 -#define SWF14_APM_SUSPEND 0x3 -#define SWF14_APM_STANDBY 0x1 -#define SWF14_APM_RESTORE 0x0 - -/* Add the device class for LFP, TV, HDMI */ -#define DEVICE_TYPE_INT_LFP 0x1022 -#define DEVICE_TYPE_INT_TV 0x1009 -#define DEVICE_TYPE_HDMI 0x60D2 -#define DEVICE_TYPE_DP 0x68C6 -#define DEVICE_TYPE_eDP 0x78C6 - -#define DEVICE_TYPE_CLASS_EXTENSION (1 << 15) -#define DEVICE_TYPE_POWER_MANAGEMENT (1 << 14) -#define DEVICE_TYPE_HOTPLUG_SIGNALING (1 << 13) -#define DEVICE_TYPE_INTERNAL_CONNECTOR (1 << 12) -#define DEVICE_TYPE_NOT_HDMI_OUTPUT (1 << 11) -#define DEVICE_TYPE_MIPI_OUTPUT (1 << 10) -#define DEVICE_TYPE_COMPOSITE_OUTPUT (1 << 9) -#define DEVICE_TYPE_DUAL_CHANNEL (1 << 8) -#define DEVICE_TYPE_HIGH_SPEED_LINK (1 << 6) -#define DEVICE_TYPE_LVDS_SINGALING (1 << 5) -#define DEVICE_TYPE_TMDS_DVI_SIGNALING (1 << 4) -#define DEVICE_TYPE_VIDEO_SIGNALING (1 << 3) -#define DEVICE_TYPE_DISPLAYPORT_OUTPUT (1 << 2) -#define DEVICE_TYPE_DIGITAL_OUTPUT (1 << 1) -#define DEVICE_TYPE_ANALOG_OUTPUT (1 << 0) - -/* - * Bits we care about when checking for DEVICE_TYPE_eDP - * Depending on the system, the other bits may or may not - * be set for eDP outputs. - */ -#define DEVICE_TYPE_eDP_BITS \ - (DEVICE_TYPE_INTERNAL_CONNECTOR | \ - DEVICE_TYPE_MIPI_OUTPUT | \ - DEVICE_TYPE_COMPOSITE_OUTPUT | \ - DEVICE_TYPE_DUAL_CHANNEL | \ - DEVICE_TYPE_LVDS_SINGALING | \ - DEVICE_TYPE_TMDS_DVI_SIGNALING | \ - DEVICE_TYPE_VIDEO_SIGNALING | \ - DEVICE_TYPE_DISPLAYPORT_OUTPUT | \ - DEVICE_TYPE_ANALOG_OUTPUT) - -/* define the DVO port for HDMI output type */ -#define DVO_B 1 -#define DVO_C 2 -#define DVO_D 3 - -/* Possible values for the "DVO Port" field for versions >= 155: */ -#define DVO_PORT_HDMIA 0 -#define DVO_PORT_HDMIB 1 -#define DVO_PORT_HDMIC 2 -#define DVO_PORT_HDMID 3 -#define DVO_PORT_LVDS 4 -#define DVO_PORT_TV 5 -#define DVO_PORT_CRT 6 -#define DVO_PORT_DPB 7 -#define DVO_PORT_DPC 8 -#define DVO_PORT_DPD 9 -#define DVO_PORT_DPA 10 -#define DVO_PORT_DPE 11 -#define DVO_PORT_HDMIE 12 -#define DVO_PORT_MIPIA 21 -#define DVO_PORT_MIPIB 22 -#define DVO_PORT_MIPIC 23 -#define DVO_PORT_MIPID 24 +/* MIPI Sequence Block definitions */ +enum mipi_seq { + MIPI_SEQ_END = 0, + MIPI_SEQ_ASSERT_RESET, + MIPI_SEQ_INIT_OTP, + MIPI_SEQ_DISPLAY_ON, + MIPI_SEQ_DISPLAY_OFF, + MIPI_SEQ_DEASSERT_RESET, + MIPI_SEQ_BACKLIGHT_ON, /* sequence block v2+ */ + MIPI_SEQ_BACKLIGHT_OFF, /* sequence block v2+ */ + MIPI_SEQ_TEAR_ON, /* sequence block v2+ */ + MIPI_SEQ_TEAR_OFF, /* sequence block v3+ */ + MIPI_SEQ_POWER_ON, /* sequence block v3+ */ + MIPI_SEQ_POWER_OFF, /* sequence block v3+ */ + MIPI_SEQ_MAX +}; -/* Block 52 contains MIPI Panel info - * 6 such enteries will there. Index into correct - * entery is based on the panel_index in #40 LFP - */ -#define MAX_MIPI_CONFIGURATIONS 6 +enum mipi_seq_element { + MIPI_SEQ_ELEM_END = 0, + MIPI_SEQ_ELEM_SEND_PKT, + MIPI_SEQ_ELEM_DELAY, + MIPI_SEQ_ELEM_GPIO, + MIPI_SEQ_ELEM_I2C, /* sequence block v2+ */ + MIPI_SEQ_ELEM_SPI, /* sequence block v3+ */ + MIPI_SEQ_ELEM_PMIC, /* sequence block v3+ */ + MIPI_SEQ_ELEM_MAX +}; #define MIPI_DSI_UNDEFINED_PANEL_ID 0 #define MIPI_DSI_GENERIC_PANEL_ID 1 -/* - * PMIC vs SoC Backlight support specified in pwm_blc - * field in mipi_config block below. -*/ -#define PPS_BLC_PMIC 0 -#define PPS_BLC_SOC 1 - struct mipi_config { u16 panel_id; @@ -821,6 +86,8 @@ struct mipi_config { u32 video_transfer_mode:2; u32 cabc_supported:1; +#define PPS_BLC_PMIC 0 +#define PPS_BLC_SOC 1 u32 pwm_blc:1; /* Bit 13:10 */ @@ -924,12 +191,7 @@ struct mipi_config { } __packed; -/* Block 52 contains MIPI configuration block - * 6 * bdb_mipi_config, followed by 6 pps data - * block below - * - * all delays has a unit of 100us - */ +/* all delays have a unit of 100us */ struct mipi_pps_data { u16 panel_on_delay; u16 bl_enable_delay; @@ -938,57 +200,4 @@ struct mipi_pps_data { u16 panel_power_cycle_delay; } __packed; -struct bdb_mipi_config { - struct mipi_config config[MAX_MIPI_CONFIGURATIONS]; - struct mipi_pps_data pps[MAX_MIPI_CONFIGURATIONS]; -} __packed; - -/* Block 53 contains MIPI sequences as needed by the panel - * for enabling it. This block can be variable in size and - * can be maximum of 6 blocks - */ -struct bdb_mipi_sequence { - u8 version; - u8 data[0]; -} __packed; - -/* MIPI Sequnece Block definitions */ -enum mipi_seq { - MIPI_SEQ_END = 0, - MIPI_SEQ_ASSERT_RESET, - MIPI_SEQ_INIT_OTP, - MIPI_SEQ_DISPLAY_ON, - MIPI_SEQ_DISPLAY_OFF, - MIPI_SEQ_DEASSERT_RESET, - MIPI_SEQ_BACKLIGHT_ON, /* sequence block v2+ */ - MIPI_SEQ_BACKLIGHT_OFF, /* sequence block v2+ */ - MIPI_SEQ_TEAR_ON, /* sequence block v2+ */ - MIPI_SEQ_TEAR_OFF, /* sequence block v3+ */ - MIPI_SEQ_POWER_ON, /* sequence block v3+ */ - MIPI_SEQ_POWER_OFF, /* sequence block v3+ */ - MIPI_SEQ_MAX -}; - -enum mipi_seq_element { - MIPI_SEQ_ELEM_END = 0, - MIPI_SEQ_ELEM_SEND_PKT, - MIPI_SEQ_ELEM_DELAY, - MIPI_SEQ_ELEM_GPIO, - MIPI_SEQ_ELEM_I2C, /* sequence block v2+ */ - MIPI_SEQ_ELEM_SPI, /* sequence block v3+ */ - MIPI_SEQ_ELEM_PMIC, /* sequence block v3+ */ - MIPI_SEQ_ELEM_MAX -}; - -enum mipi_gpio_pin_index { - MIPI_GPIO_UNDEFINED = 0, - MIPI_GPIO_PANEL_ENABLE, - MIPI_GPIO_BL_ENABLE, - MIPI_GPIO_PWM_ENABLE, - MIPI_GPIO_RESET_N, - MIPI_GPIO_PWR_DOWN_R, - MIPI_GPIO_STDBY_RST_N, - MIPI_GPIO_MAX -}; - #endif /* _INTEL_BIOS_H_ */ diff --git a/drivers/gpu/drm/i915/intel_vbt_defs.h b/drivers/gpu/drm/i915/intel_vbt_defs.h new file mode 100644 index 000000000000..749dceab7c02 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_vbt_defs.h @@ -0,0 +1,826 @@ +/* + * Copyright © 2006-2016 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * + */ + +/* + * This information is private to VBT parsing in intel_bios.c. + * + * Please do NOT include anywhere else. + */ +#ifndef _INTEL_BIOS_PRIVATE +#error "intel_vbt_defs.h is private to intel_bios.c" +#endif + +#ifndef _INTEL_VBT_DEFS_H_ +#define _INTEL_VBT_DEFS_H_ + +#include "intel_bios.h" + +/** + * struct vbt_header - VBT Header structure + * @signature: VBT signature, always starts with "$VBT" + * @version: Version of this structure + * @header_size: Size of this structure + * @vbt_size: Size of VBT (VBT Header, BDB Header and data blocks) + * @vbt_checksum: Checksum + * @reserved0: Reserved + * @bdb_offset: Offset of &struct bdb_header from beginning of VBT + * @aim_offset: Offsets of add-in data blocks from beginning of VBT + */ +struct vbt_header { + u8 signature[20]; + u16 version; + u16 header_size; + u16 vbt_size; + u8 vbt_checksum; + u8 reserved0; + u32 bdb_offset; + u32 aim_offset[4]; +} __packed; + +/** + * struct bdb_header - BDB Header structure + * @signature: BDB signature "BIOS_DATA_BLOCK" + * @version: Version of the data block definitions + * @header_size: Size of this structure + * @bdb_size: Size of BDB (BDB Header and data blocks) + */ +struct bdb_header { + u8 signature[16]; + u16 version; + u16 header_size; + u16 bdb_size; +} __packed; + +/* strictly speaking, this is a "skip" block, but it has interesting info */ +struct vbios_data { + u8 type; /* 0 == desktop, 1 == mobile */ + u8 relstage; + u8 chipset; + u8 lvds_present:1; + u8 tv_present:1; + u8 rsvd2:6; /* finish byte */ + u8 rsvd3[4]; + u8 signon[155]; + u8 copyright[61]; + u16 code_segment; + u8 dos_boot_mode; + u8 bandwidth_percent; + u8 rsvd4; /* popup memory size */ + u8 resize_pci_bios; + u8 rsvd5; /* is crt already on ddc2 */ +} __packed; + +/* + * There are several types of BIOS data blocks (BDBs), each block has + * an ID and size in the first 3 bytes (ID in first, size in next 2). + * Known types are listed below. + */ +#define BDB_GENERAL_FEATURES 1 +#define BDB_GENERAL_DEFINITIONS 2 +#define BDB_OLD_TOGGLE_LIST 3 +#define BDB_MODE_SUPPORT_LIST 4 +#define BDB_GENERIC_MODE_TABLE 5 +#define BDB_EXT_MMIO_REGS 6 +#define BDB_SWF_IO 7 +#define BDB_SWF_MMIO 8 +#define BDB_PSR 9 +#define BDB_MODE_REMOVAL_TABLE 10 +#define BDB_CHILD_DEVICE_TABLE 11 +#define BDB_DRIVER_FEATURES 12 +#define BDB_DRIVER_PERSISTENCE 13 +#define BDB_EXT_TABLE_PTRS 14 +#define BDB_DOT_CLOCK_OVERRIDE 15 +#define BDB_DISPLAY_SELECT 16 +/* 17 rsvd */ +#define BDB_DRIVER_ROTATION 18 +#define BDB_DISPLAY_REMOVE 19 +#define BDB_OEM_CUSTOM 20 +#define BDB_EFP_LIST 21 /* workarounds for VGA hsync/vsync */ +#define BDB_SDVO_LVDS_OPTIONS 22 +#define BDB_SDVO_PANEL_DTDS 23 +#define BDB_SDVO_LVDS_PNP_IDS 24 +#define BDB_SDVO_LVDS_POWER_SEQ 25 +#define BDB_TV_OPTIONS 26 +#define BDB_EDP 27 +#define BDB_LVDS_OPTIONS 40 +#define BDB_LVDS_LFP_DATA_PTRS 41 +#define BDB_LVDS_LFP_DATA 42 +#define BDB_LVDS_BACKLIGHT 43 +#define BDB_LVDS_POWER 44 +#define BDB_MIPI_CONFIG 52 +#define BDB_MIPI_SEQUENCE 53 +#define BDB_SKIP 254 /* VBIOS private block, ignore */ + +struct bdb_general_features { + /* bits 1 */ + u8 panel_fitting:2; + u8 flexaim:1; + u8 msg_enable:1; + u8 clear_screen:3; + u8 color_flip:1; + + /* bits 2 */ + u8 download_ext_vbt:1; + u8 enable_ssc:1; + u8 ssc_freq:1; + u8 enable_lfp_on_override:1; + u8 disable_ssc_ddt:1; + u8 rsvd7:1; + u8 display_clock_mode:1; + u8 rsvd8:1; /* finish byte */ + + /* bits 3 */ + u8 disable_smooth_vision:1; + u8 single_dvi:1; + u8 rsvd9:1; + u8 fdi_rx_polarity_inverted:1; + u8 rsvd10:4; /* finish byte */ + + /* bits 4 */ + u8 legacy_monitor_detect; + + /* bits 5 */ + u8 int_crt_support:1; + u8 int_tv_support:1; + u8 int_efp_support:1; + u8 dp_ssc_enb:1; /* PCH attached eDP supports SSC */ + u8 dp_ssc_freq:1; /* SSC freq for PCH attached eDP */ + u8 rsvd11:3; /* finish byte */ +} __packed; + +/* pre-915 */ +#define GPIO_PIN_DVI_LVDS 0x03 /* "DVI/LVDS DDC GPIO pins" */ +#define GPIO_PIN_ADD_I2C 0x05 /* "ADDCARD I2C GPIO pins" */ +#define GPIO_PIN_ADD_DDC 0x04 /* "ADDCARD DDC GPIO pins" */ +#define GPIO_PIN_ADD_DDC_I2C 0x06 /* "ADDCARD DDC/I2C GPIO pins" */ + +/* Pre 915 */ +#define DEVICE_TYPE_NONE 0x00 +#define DEVICE_TYPE_CRT 0x01 +#define DEVICE_TYPE_TV 0x09 +#define DEVICE_TYPE_EFP 0x12 +#define DEVICE_TYPE_LFP 0x22 +/* On 915+ */ +#define DEVICE_TYPE_CRT_DPMS 0x6001 +#define DEVICE_TYPE_CRT_DPMS_HOTPLUG 0x4001 +#define DEVICE_TYPE_TV_COMPOSITE 0x0209 +#define DEVICE_TYPE_TV_MACROVISION 0x0289 +#define DEVICE_TYPE_TV_RF_COMPOSITE 0x020c +#define DEVICE_TYPE_TV_SVIDEO_COMPOSITE 0x0609 +#define DEVICE_TYPE_TV_SCART 0x0209 +#define DEVICE_TYPE_TV_CODEC_HOTPLUG_PWR 0x6009 +#define DEVICE_TYPE_EFP_HOTPLUG_PWR 0x6012 +#define DEVICE_TYPE_EFP_DVI_HOTPLUG_PWR 0x6052 +#define DEVICE_TYPE_EFP_DVI_I 0x6053 +#define DEVICE_TYPE_EFP_DVI_D_DUAL 0x6152 +#define DEVICE_TYPE_EFP_DVI_D_HDCP 0x60d2 +#define DEVICE_TYPE_OPENLDI_HOTPLUG_PWR 0x6062 +#define DEVICE_TYPE_OPENLDI_DUALPIX 0x6162 +#define DEVICE_TYPE_LFP_PANELLINK 0x5012 +#define DEVICE_TYPE_LFP_CMOS_PWR 0x5042 +#define DEVICE_TYPE_LFP_LVDS_PWR 0x5062 +#define DEVICE_TYPE_LFP_LVDS_DUAL 0x5162 +#define DEVICE_TYPE_LFP_LVDS_DUAL_HDCP 0x51e2 + +#define DEVICE_CFG_NONE 0x00 +#define DEVICE_CFG_12BIT_DVOB 0x01 +#define DEVICE_CFG_12BIT_DVOC 0x02 +#define DEVICE_CFG_24BIT_DVOBC 0x09 +#define DEVICE_CFG_24BIT_DVOCB 0x0a +#define DEVICE_CFG_DUAL_DVOB 0x11 +#define DEVICE_CFG_DUAL_DVOC 0x12 +#define DEVICE_CFG_DUAL_DVOBC 0x13 +#define DEVICE_CFG_DUAL_LINK_DVOBC 0x19 +#define DEVICE_CFG_DUAL_LINK_DVOCB 0x1a + +#define DEVICE_WIRE_NONE 0x00 +#define DEVICE_WIRE_DVOB 0x01 +#define DEVICE_WIRE_DVOC 0x02 +#define DEVICE_WIRE_DVOBC 0x03 +#define DEVICE_WIRE_DVOBB 0x05 +#define DEVICE_WIRE_DVOCC 0x06 +#define DEVICE_WIRE_DVOB_MASTER 0x0d +#define DEVICE_WIRE_DVOC_MASTER 0x0e + +#define DEVICE_PORT_DVOA 0x00 /* none on 845+ */ +#define DEVICE_PORT_DVOB 0x01 +#define DEVICE_PORT_DVOC 0x02 + +/* + * We used to keep this struct but without any version control. We should avoid + * using it in the future, but it should be safe to keep using it in the old + * code. Do not change; we rely on its size. + */ +struct old_child_dev_config { + u16 handle; + u16 device_type; + u8 device_id[10]; /* ascii string */ + u16 addin_offset; + u8 dvo_port; /* See Device_PORT_* above */ + u8 i2c_pin; + u8 slave_addr; + u8 ddc_pin; + u16 edid_ptr; + u8 dvo_cfg; /* See DEVICE_CFG_* above */ + u8 dvo2_port; + u8 i2c2_pin; + u8 slave2_addr; + u8 ddc2_pin; + u8 capabilities; + u8 dvo_wiring;/* See DEVICE_WIRE_* above */ + u8 dvo2_wiring; + u16 extended_type; + u8 dvo_function; +} __packed; + +/* This one contains field offsets that are known to be common for all BDB + * versions. Notice that the meaning of the contents contents may still change, + * but at least the offsets are consistent. */ + +/* Definitions for flags_1 */ +#define IBOOST_ENABLE (1<<3) + +struct common_child_dev_config { + u16 handle; + u16 device_type; + u8 not_common1[12]; + u8 dvo_port; + u8 not_common2[2]; + u8 ddc_pin; + u16 edid_ptr; + u8 obsolete; + u8 flags_1; + u8 not_common3[13]; + u8 iboost_level; +} __packed; + + +/* This field changes depending on the BDB version, so the most reliable way to + * read it is by checking the BDB version and reading the raw pointer. */ +union child_device_config { + /* This one is safe to be used anywhere, but the code should still check + * the BDB version. */ + u8 raw[33]; + /* This one should only be kept for legacy code. */ + struct old_child_dev_config old; + /* This one should also be safe to use anywhere, even without version + * checks. */ + struct common_child_dev_config common; +} __packed; + +struct bdb_general_definitions { + /* DDC GPIO */ + u8 crt_ddc_gmbus_pin; + + /* DPMS bits */ + u8 dpms_acpi:1; + u8 skip_boot_crt_detect:1; + u8 dpms_aim:1; + u8 rsvd1:5; /* finish byte */ + + /* boot device bits */ + u8 boot_display[2]; + u8 child_dev_size; + + /* + * Device info: + * If TV is present, it'll be at devices[0]. + * LVDS will be next, either devices[0] or [1], if present. + * On some platforms the number of device is 6. But could be as few as + * 4 if both TV and LVDS are missing. + * And the device num is related with the size of general definition + * block. It is obtained by using the following formula: + * number = (block_size - sizeof(bdb_general_definitions))/ + * defs->child_dev_size; + */ + uint8_t devices[0]; +} __packed; + +/* Mask for DRRS / Panel Channel / SSC / BLT control bits extraction */ +#define MODE_MASK 0x3 + +struct bdb_lvds_options { + u8 panel_type; + u8 rsvd1; + /* LVDS capabilities, stored in a dword */ + u8 pfit_mode:2; + u8 pfit_text_mode_enhanced:1; + u8 pfit_gfx_mode_enhanced:1; + u8 pfit_ratio_auto:1; + u8 pixel_dither:1; + u8 lvds_edid:1; + u8 rsvd2:1; + u8 rsvd4; + /* LVDS Panel channel bits stored here */ + u32 lvds_panel_channel_bits; + /* LVDS SSC (Spread Spectrum Clock) bits stored here. */ + u16 ssc_bits; + u16 ssc_freq; + u16 ssc_ddt; + /* Panel color depth defined here */ + u16 panel_color_depth; + /* LVDS panel type bits stored here */ + u32 dps_panel_type_bits; + /* LVDS backlight control type bits stored here */ + u32 blt_control_type_bits; +} __packed; + +/* LFP pointer table contains entries to the struct below */ +struct bdb_lvds_lfp_data_ptr { + u16 fp_timing_offset; /* offsets are from start of bdb */ + u8 fp_table_size; + u16 dvo_timing_offset; + u8 dvo_table_size; + u16 panel_pnp_id_offset; + u8 pnp_table_size; +} __packed; + +struct bdb_lvds_lfp_data_ptrs { + u8 lvds_entries; /* followed by one or more lvds_data_ptr structs */ + struct bdb_lvds_lfp_data_ptr ptr[16]; +} __packed; + +/* LFP data has 3 blocks per entry */ +struct lvds_fp_timing { + u16 x_res; + u16 y_res; + u32 lvds_reg; + u32 lvds_reg_val; + u32 pp_on_reg; + u32 pp_on_reg_val; + u32 pp_off_reg; + u32 pp_off_reg_val; + u32 pp_cycle_reg; + u32 pp_cycle_reg_val; + u32 pfit_reg; + u32 pfit_reg_val; + u16 terminator; +} __packed; + +struct lvds_dvo_timing { + u16 clock; /**< In 10khz */ + u8 hactive_lo; + u8 hblank_lo; + u8 hblank_hi:4; + u8 hactive_hi:4; + u8 vactive_lo; + u8 vblank_lo; + u8 vblank_hi:4; + u8 vactive_hi:4; + u8 hsync_off_lo; + u8 hsync_pulse_width; + u8 vsync_pulse_width:4; + u8 vsync_off:4; + u8 rsvd0:6; + u8 hsync_off_hi:2; + u8 h_image; + u8 v_image; + u8 max_hv; + u8 h_border; + u8 v_border; + u8 rsvd1:3; + u8 digital:2; + u8 vsync_positive:1; + u8 hsync_positive:1; + u8 rsvd2:1; +} __packed; + +struct lvds_pnp_id { + u16 mfg_name; + u16 product_code; + u32 serial; + u8 mfg_week; + u8 mfg_year; +} __packed; + +struct bdb_lvds_lfp_data_entry { + struct lvds_fp_timing fp_timing; + struct lvds_dvo_timing dvo_timing; + struct lvds_pnp_id pnp_id; +} __packed; + +struct bdb_lvds_lfp_data { + struct bdb_lvds_lfp_data_entry data[16]; +} __packed; + +#define BDB_BACKLIGHT_TYPE_NONE 0 +#define BDB_BACKLIGHT_TYPE_PWM 2 + +struct bdb_lfp_backlight_data_entry { + u8 type:2; + u8 active_low_pwm:1; + u8 obsolete1:5; + u16 pwm_freq_hz; + u8 min_brightness; + u8 obsolete2; + u8 obsolete3; +} __packed; + +struct bdb_lfp_backlight_data { + u8 entry_size; + struct bdb_lfp_backlight_data_entry data[16]; + u8 level[16]; +} __packed; + +struct aimdb_header { + char signature[16]; + char oem_device[20]; + u16 aimdb_version; + u16 aimdb_header_size; + u16 aimdb_size; +} __packed; + +struct aimdb_block { + u8 aimdb_id; + u16 aimdb_size; +} __packed; + +struct vch_panel_data { + u16 fp_timing_offset; + u8 fp_timing_size; + u16 dvo_timing_offset; + u8 dvo_timing_size; + u16 text_fitting_offset; + u8 text_fitting_size; + u16 graphics_fitting_offset; + u8 graphics_fitting_size; +} __packed; + +struct vch_bdb_22 { + struct aimdb_block aimdb_block; + struct vch_panel_data panels[16]; +} __packed; + +struct bdb_sdvo_lvds_options { + u8 panel_backlight; + u8 h40_set_panel_type; + u8 panel_type; + u8 ssc_clk_freq; + u16 als_low_trip; + u16 als_high_trip; + u8 sclalarcoeff_tab_row_num; + u8 sclalarcoeff_tab_row_size; + u8 coefficient[8]; + u8 panel_misc_bits_1; + u8 panel_misc_bits_2; + u8 panel_misc_bits_3; + u8 panel_misc_bits_4; +} __packed; + + +#define BDB_DRIVER_FEATURE_NO_LVDS 0 +#define BDB_DRIVER_FEATURE_INT_LVDS 1 +#define BDB_DRIVER_FEATURE_SDVO_LVDS 2 +#define BDB_DRIVER_FEATURE_EDP 3 + +struct bdb_driver_features { + u8 boot_dev_algorithm:1; + u8 block_display_switch:1; + u8 allow_display_switch:1; + u8 hotplug_dvo:1; + u8 dual_view_zoom:1; + u8 int15h_hook:1; + u8 sprite_in_clone:1; + u8 primary_lfp_id:1; + + u16 boot_mode_x; + u16 boot_mode_y; + u8 boot_mode_bpp; + u8 boot_mode_refresh; + + u16 enable_lfp_primary:1; + u16 selective_mode_pruning:1; + u16 dual_frequency:1; + u16 render_clock_freq:1; /* 0: high freq; 1: low freq */ + u16 nt_clone_support:1; + u16 power_scheme_ui:1; /* 0: CUI; 1: 3rd party */ + u16 sprite_display_assign:1; /* 0: secondary; 1: primary */ + u16 cui_aspect_scaling:1; + u16 preserve_aspect_ratio:1; + u16 sdvo_device_power_down:1; + u16 crt_hotplug:1; + u16 lvds_config:2; + u16 tv_hotplug:1; + u16 hdmi_config:2; + + u8 static_display:1; + u8 reserved2:7; + u16 legacy_crt_max_x; + u16 legacy_crt_max_y; + u8 legacy_crt_max_refresh; + + u8 hdmi_termination; + u8 custom_vbt_version; + /* Driver features data block */ + u16 rmpm_enabled:1; + u16 s2ddt_enabled:1; + u16 dpst_enabled:1; + u16 bltclt_enabled:1; + u16 adb_enabled:1; + u16 drrs_enabled:1; + u16 grs_enabled:1; + u16 gpmt_enabled:1; + u16 tbt_enabled:1; + u16 psr_enabled:1; + u16 ips_enabled:1; + u16 reserved3:4; + u16 pc_feature_valid:1; +} __packed; + +#define EDP_18BPP 0 +#define EDP_24BPP 1 +#define EDP_30BPP 2 +#define EDP_RATE_1_62 0 +#define EDP_RATE_2_7 1 +#define EDP_LANE_1 0 +#define EDP_LANE_2 1 +#define EDP_LANE_4 3 +#define EDP_PREEMPHASIS_NONE 0 +#define EDP_PREEMPHASIS_3_5dB 1 +#define EDP_PREEMPHASIS_6dB 2 +#define EDP_PREEMPHASIS_9_5dB 3 +#define EDP_VSWING_0_4V 0 +#define EDP_VSWING_0_6V 1 +#define EDP_VSWING_0_8V 2 +#define EDP_VSWING_1_2V 3 + + +struct edp_link_params { + u8 rate:4; + u8 lanes:4; + u8 preemphasis:4; + u8 vswing:4; +} __packed; + +struct bdb_edp { + struct edp_power_seq power_seqs[16]; + u32 color_depth; + struct edp_link_params link_params[16]; + u32 sdrrs_msa_timing_delay; + + /* ith bit indicates enabled/disabled for (i+1)th panel */ + u16 edp_s3d_feature; + u16 edp_t3_optimization; + u64 edp_vswing_preemph; /* v173 */ +} __packed; + +struct psr_table { + /* Feature bits */ + u8 full_link:1; + u8 require_aux_to_wakeup:1; + u8 feature_bits_rsvd:6; + + /* Wait times */ + u8 idle_frames:4; + u8 lines_to_wait:3; + u8 wait_times_rsvd:1; + + /* TP wake up time in multiple of 100 */ + u16 tp1_wakeup_time; + u16 tp2_tp3_wakeup_time; +} __packed; + +struct bdb_psr { + struct psr_table psr_table[16]; +} __packed; + +/* + * Driver<->VBIOS interaction occurs through scratch bits in + * GR18 & SWF*. + */ + +/* GR18 bits are set on display switch and hotkey events */ +#define GR18_DRIVER_SWITCH_EN (1<<7) /* 0: VBIOS control, 1: driver control */ +#define GR18_HOTKEY_MASK 0x78 /* See also SWF4 15:0 */ +#define GR18_HK_NONE (0x0<<3) +#define GR18_HK_LFP_STRETCH (0x1<<3) +#define GR18_HK_TOGGLE_DISP (0x2<<3) +#define GR18_HK_DISP_SWITCH (0x4<<3) /* see SWF14 15:0 for what to enable */ +#define GR18_HK_POPUP_DISABLED (0x6<<3) +#define GR18_HK_POPUP_ENABLED (0x7<<3) +#define GR18_HK_PFIT (0x8<<3) +#define GR18_HK_APM_CHANGE (0xa<<3) +#define GR18_HK_MULTIPLE (0xc<<3) +#define GR18_USER_INT_EN (1<<2) +#define GR18_A0000_FLUSH_EN (1<<1) +#define GR18_SMM_EN (1<<0) + +/* Set by driver, cleared by VBIOS */ +#define SWF00_YRES_SHIFT 16 +#define SWF00_XRES_SHIFT 0 +#define SWF00_RES_MASK 0xffff + +/* Set by VBIOS at boot time and driver at runtime */ +#define SWF01_TV2_FORMAT_SHIFT 8 +#define SWF01_TV1_FORMAT_SHIFT 0 +#define SWF01_TV_FORMAT_MASK 0xffff + +#define SWF10_VBIOS_BLC_I2C_EN (1<<29) +#define SWF10_GTT_OVERRIDE_EN (1<<28) +#define SWF10_LFP_DPMS_OVR (1<<27) /* override DPMS on display switch */ +#define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24) +#define SWF10_OLD_TOGGLE 0x0 +#define SWF10_TOGGLE_LIST_1 0x1 +#define SWF10_TOGGLE_LIST_2 0x2 +#define SWF10_TOGGLE_LIST_3 0x3 +#define SWF10_TOGGLE_LIST_4 0x4 +#define SWF10_PANNING_EN (1<<23) +#define SWF10_DRIVER_LOADED (1<<22) +#define SWF10_EXTENDED_DESKTOP (1<<21) +#define SWF10_EXCLUSIVE_MODE (1<<20) +#define SWF10_OVERLAY_EN (1<<19) +#define SWF10_PLANEB_HOLDOFF (1<<18) +#define SWF10_PLANEA_HOLDOFF (1<<17) +#define SWF10_VGA_HOLDOFF (1<<16) +#define SWF10_ACTIVE_DISP_MASK 0xffff +#define SWF10_PIPEB_LFP2 (1<<15) +#define SWF10_PIPEB_EFP2 (1<<14) +#define SWF10_PIPEB_TV2 (1<<13) +#define SWF10_PIPEB_CRT2 (1<<12) +#define SWF10_PIPEB_LFP (1<<11) +#define SWF10_PIPEB_EFP (1<<10) +#define SWF10_PIPEB_TV (1<<9) +#define SWF10_PIPEB_CRT (1<<8) +#define SWF10_PIPEA_LFP2 (1<<7) +#define SWF10_PIPEA_EFP2 (1<<6) +#define SWF10_PIPEA_TV2 (1<<5) +#define SWF10_PIPEA_CRT2 (1<<4) +#define SWF10_PIPEA_LFP (1<<3) +#define SWF10_PIPEA_EFP (1<<2) +#define SWF10_PIPEA_TV (1<<1) +#define SWF10_PIPEA_CRT (1<<0) + +#define SWF11_MEMORY_SIZE_SHIFT 16 +#define SWF11_SV_TEST_EN (1<<15) +#define SWF11_IS_AGP (1<<14) +#define SWF11_DISPLAY_HOLDOFF (1<<13) +#define SWF11_DPMS_REDUCED (1<<12) +#define SWF11_IS_VBE_MODE (1<<11) +#define SWF11_PIPEB_ACCESS (1<<10) /* 0 here means pipe a */ +#define SWF11_DPMS_MASK 0x07 +#define SWF11_DPMS_OFF (1<<2) +#define SWF11_DPMS_SUSPEND (1<<1) +#define SWF11_DPMS_STANDBY (1<<0) +#define SWF11_DPMS_ON 0 + +#define SWF14_GFX_PFIT_EN (1<<31) +#define SWF14_TEXT_PFIT_EN (1<<30) +#define SWF14_LID_STATUS_CLOSED (1<<29) /* 0 here means open */ +#define SWF14_POPUP_EN (1<<28) +#define SWF14_DISPLAY_HOLDOFF (1<<27) +#define SWF14_DISP_DETECT_EN (1<<26) +#define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */ +#define SWF14_DRIVER_STATUS (1<<24) +#define SWF14_OS_TYPE_WIN9X (1<<23) +#define SWF14_OS_TYPE_WINNT (1<<22) +/* 21:19 rsvd */ +#define SWF14_PM_TYPE_MASK 0x00070000 +#define SWF14_PM_ACPI_VIDEO (0x4 << 16) +#define SWF14_PM_ACPI (0x3 << 16) +#define SWF14_PM_APM_12 (0x2 << 16) +#define SWF14_PM_APM_11 (0x1 << 16) +#define SWF14_HK_REQUEST_MASK 0x0000ffff /* see GR18 6:3 for event type */ + /* if GR18 indicates a display switch */ +#define SWF14_DS_PIPEB_LFP2_EN (1<<15) +#define SWF14_DS_PIPEB_EFP2_EN (1<<14) +#define SWF14_DS_PIPEB_TV2_EN (1<<13) +#define SWF14_DS_PIPEB_CRT2_EN (1<<12) +#define SWF14_DS_PIPEB_LFP_EN (1<<11) +#define SWF14_DS_PIPEB_EFP_EN (1<<10) +#define SWF14_DS_PIPEB_TV_EN (1<<9) +#define SWF14_DS_PIPEB_CRT_EN (1<<8) +#define SWF14_DS_PIPEA_LFP2_EN (1<<7) +#define SWF14_DS_PIPEA_EFP2_EN (1<<6) +#define SWF14_DS_PIPEA_TV2_EN (1<<5) +#define SWF14_DS_PIPEA_CRT2_EN (1<<4) +#define SWF14_DS_PIPEA_LFP_EN (1<<3) +#define SWF14_DS_PIPEA_EFP_EN (1<<2) +#define SWF14_DS_PIPEA_TV_EN (1<<1) +#define SWF14_DS_PIPEA_CRT_EN (1<<0) + /* if GR18 indicates a panel fitting request */ +#define SWF14_PFIT_EN (1<<0) /* 0 means disable */ + /* if GR18 indicates an APM change request */ +#define SWF14_APM_HIBERNATE 0x4 +#define SWF14_APM_SUSPEND 0x3 +#define SWF14_APM_STANDBY 0x1 +#define SWF14_APM_RESTORE 0x0 + +/* Add the device class for LFP, TV, HDMI */ +#define DEVICE_TYPE_INT_LFP 0x1022 +#define DEVICE_TYPE_INT_TV 0x1009 +#define DEVICE_TYPE_HDMI 0x60D2 +#define DEVICE_TYPE_DP 0x68C6 +#define DEVICE_TYPE_eDP 0x78C6 + +#define DEVICE_TYPE_CLASS_EXTENSION (1 << 15) +#define DEVICE_TYPE_POWER_MANAGEMENT (1 << 14) +#define DEVICE_TYPE_HOTPLUG_SIGNALING (1 << 13) +#define DEVICE_TYPE_INTERNAL_CONNECTOR (1 << 12) +#define DEVICE_TYPE_NOT_HDMI_OUTPUT (1 << 11) +#define DEVICE_TYPE_MIPI_OUTPUT (1 << 10) +#define DEVICE_TYPE_COMPOSITE_OUTPUT (1 << 9) +#define DEVICE_TYPE_DUAL_CHANNEL (1 << 8) +#define DEVICE_TYPE_HIGH_SPEED_LINK (1 << 6) +#define DEVICE_TYPE_LVDS_SINGALING (1 << 5) +#define DEVICE_TYPE_TMDS_DVI_SIGNALING (1 << 4) +#define DEVICE_TYPE_VIDEO_SIGNALING (1 << 3) +#define DEVICE_TYPE_DISPLAYPORT_OUTPUT (1 << 2) +#define DEVICE_TYPE_DIGITAL_OUTPUT (1 << 1) +#define DEVICE_TYPE_ANALOG_OUTPUT (1 << 0) + +/* + * Bits we care about when checking for DEVICE_TYPE_eDP + * Depending on the system, the other bits may or may not + * be set for eDP outputs. + */ +#define DEVICE_TYPE_eDP_BITS \ + (DEVICE_TYPE_INTERNAL_CONNECTOR | \ + DEVICE_TYPE_MIPI_OUTPUT | \ + DEVICE_TYPE_COMPOSITE_OUTPUT | \ + DEVICE_TYPE_DUAL_CHANNEL | \ + DEVICE_TYPE_LVDS_SINGALING | \ + DEVICE_TYPE_TMDS_DVI_SIGNALING | \ + DEVICE_TYPE_VIDEO_SIGNALING | \ + DEVICE_TYPE_DISPLAYPORT_OUTPUT | \ + DEVICE_TYPE_ANALOG_OUTPUT) + +/* define the DVO port for HDMI output type */ +#define DVO_B 1 +#define DVO_C 2 +#define DVO_D 3 + +/* Possible values for the "DVO Port" field for versions >= 155: */ +#define DVO_PORT_HDMIA 0 +#define DVO_PORT_HDMIB 1 +#define DVO_PORT_HDMIC 2 +#define DVO_PORT_HDMID 3 +#define DVO_PORT_LVDS 4 +#define DVO_PORT_TV 5 +#define DVO_PORT_CRT 6 +#define DVO_PORT_DPB 7 +#define DVO_PORT_DPC 8 +#define DVO_PORT_DPD 9 +#define DVO_PORT_DPA 10 +#define DVO_PORT_DPE 11 +#define DVO_PORT_HDMIE 12 +#define DVO_PORT_MIPIA 21 +#define DVO_PORT_MIPIB 22 +#define DVO_PORT_MIPIC 23 +#define DVO_PORT_MIPID 24 + +/* Block 52 contains MIPI configuration block + * 6 * bdb_mipi_config, followed by 6 pps data block + * block below + */ +#define MAX_MIPI_CONFIGURATIONS 6 + +struct bdb_mipi_config { + struct mipi_config config[MAX_MIPI_CONFIGURATIONS]; + struct mipi_pps_data pps[MAX_MIPI_CONFIGURATIONS]; +} __packed; + +/* Block 53 contains MIPI sequences as needed by the panel + * for enabling it. This block can be variable in size and + * can be maximum of 6 blocks + */ +struct bdb_mipi_sequence { + u8 version; + u8 data[0]; +} __packed; + +enum mipi_gpio_pin_index { + MIPI_GPIO_UNDEFINED = 0, + MIPI_GPIO_PANEL_ENABLE, + MIPI_GPIO_BL_ENABLE, + MIPI_GPIO_PWM_ENABLE, + MIPI_GPIO_RESET_N, + MIPI_GPIO_PWR_DOWN_R, + MIPI_GPIO_STDBY_RST_N, + MIPI_GPIO_MAX +}; + +#endif /* _INTEL_VBT_DEFS_H_ */ |