diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/x86/Kconfig | 37 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/Makefile | 1 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/summit_32.c | 550 | ||||
| -rw-r--r-- | drivers/clocksource/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clocksource/cyclone.c | 113 |
5 files changed, 9 insertions, 693 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index c6a864748c38..4c33fc2336e7 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -350,7 +350,6 @@ config X86_EXTENDED_PLATFORM RDC R-321x SoC SGI 320/540 (Visual Workstation) STA2X11-based (e.g. Northville) - Summit/EXA (IBM x440) Moorestown MID devices If you have one of these systems, or if you want to build a @@ -488,10 +487,10 @@ config X86_32_NON_STANDARD depends on X86_32 && SMP depends on X86_EXTENDED_PLATFORM ---help--- - This option compiles in the NUMAQ, Summit, bigsmp, - STA2X11, default subarchitectures. It is intended for a generic - binary kernel. If you select them all, kernel will probe it - one by one and will fallback to default. + This option compiles in the NUMAQ, bigsmp, and STA2X11 default + subarchitectures. It is intended for a generic binary kernel. If you + select them all, kernel will probe it one by one and will fallback to + default. # Alphabetically sorted list of Non standard 32 bit platforms @@ -547,13 +546,6 @@ config STA2X11 option is selected the kernel will still be able to boot on standard PC machines. -config X86_SUMMIT - bool "Summit/EXA (IBM x440)" - depends on X86_32_NON_STANDARD - ---help--- - This option is needed for IBM systems that use the Summit/EXA chipset. - In particular, it is needed for the x440. - config X86_32_IRIS tristate "Eurobraille/Iris poweroff module" depends on X86_32 @@ -676,14 +668,6 @@ config MEMTEST memtest=4, mean do 4 test patterns. If you are unsure how to answer this question, answer N. -config X86_SUMMIT_NUMA - def_bool y - depends on X86_32 && NUMA && X86_32_NON_STANDARD - -config X86_CYCLONE_TIMER - def_bool y - depends on X86_SUMMIT - source "arch/x86/Kconfig.cpu" config HPET_TIMER @@ -812,7 +796,7 @@ config NR_CPUS range 2 8192 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64 default "1" if !SMP default "8192" if MAXSMP - default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP) + default "32" if SMP && (X86_NUMAQ || X86_BIGSMP) default "8" if SMP ---help--- This allows you to specify the maximum number of CPUs which this @@ -1232,8 +1216,8 @@ config DIRECT_GBPAGES config NUMA bool "Numa Memory Allocation and Scheduler Support" depends on SMP - depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI)) - default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP) + depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP)) + default y if (X86_NUMAQ || X86_BIGSMP) ---help--- Enable NUMA (Non Uniform Memory Access) support. @@ -1245,14 +1229,11 @@ config NUMA (or later), AMD Opteron, or EM64T NUMA. For 32-bit this is only needed on (rare) 32-bit-only platforms - that support NUMA topologies, such as NUMAQ / Summit, or if you - boot a 32-bit kernel on a 64-bit NUMA platform. + that support NUMA topologies, such as NUMAQ, or if you boot a 32-bit + kernel on a 64-bit NUMA platform. Otherwise, you should say N. -comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI" - depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI) - config AMD_NUMA def_bool y prompt "Old style AMD Opteron NUMA detection" diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile index 7b600c68ed20..70e141520ad7 100644 --- a/arch/x86/kernel/apic/Makefile +++ b/arch/x86/kernel/apic/Makefile @@ -19,7 +19,6 @@ endif # APIC probe will depend on the listing order here obj-$(CONFIG_X86_NUMAQ) += numaq_32.o -obj-$(CONFIG_X86_SUMMIT) += summit_32.o obj-$(CONFIG_X86_BIGSMP) += bigsmp_32.o # For 32bit, probe_32 need to be listed last diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c deleted file mode 100644 index b656128611cd..000000000000 --- a/arch/x86/kernel/apic/summit_32.c +++ /dev/null @@ -1,550 +0,0 @@ -/* - * IBM Summit-Specific Code - * - * Written By: Matthew Dobson, IBM Corporation - * - * Copyright (c) 2003 IBM Corp. - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to <colpatch@us.ibm.com> - * - */ - -#define pr_fmt(fmt) "summit: %s: " fmt, __func__ - -#include <linux/mm.h> -#include <asm/io.h> -#include <asm/bios_ebda.h> - -/* - * APIC driver for the IBM "Summit" chipset. - */ -#include <linux/threads.h> -#include <linux/cpumask.h> -#include <asm/mpspec.h> -#include <asm/apic.h> -#include <asm/smp.h> -#include <asm/fixmap.h> -#include <asm/apicdef.h> -#include <asm/ipi.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/gfp.h> -#include <linux/smp.h> - -static unsigned summit_get_apic_id(unsigned long x) -{ - return (x >> 24) & 0xFF; -} - -static inline void summit_send_IPI_mask(const struct cpumask *mask, int vector) -{ - default_send_IPI_mask_sequence_logical(mask, vector); -} - -static void summit_send_IPI_allbutself(int vector) -{ - default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector); -} - -static void summit_send_IPI_all(int vector) -{ - summit_send_IPI_mask(cpu_online_mask, vector); -} - -#include <asm/tsc.h> - -extern int use_cyclone; - -#ifdef CONFIG_X86_SUMMIT_NUMA -static void setup_summit(void); -#else -static inline void setup_summit(void) {} -#endif - -static int summit_mps_oem_check(struct mpc_table *mpc, char *oem, - char *productid) -{ - if (!strncmp(oem, "IBM ENSW", 8) && - (!strncmp(productid, "VIGIL SMP", 9) - || !strncmp(productid, "EXA", 3) - || !strncmp(productid, "RUTHLESS SMP", 12))){ - mark_tsc_unstable("Summit based system"); - use_cyclone = 1; /*enable cyclone-timer*/ - setup_summit(); - return 1; - } - return 0; -} - -/* Hook from generic ACPI tables.c */ -static int summit_acpi_madt_oem_check(char *oem_id, char *oem_table_id) -{ - if (!strncmp(oem_id, "IBM", 3) && - (!strncmp(oem_table_id, "SERVIGIL", 8) - || !strncmp(oem_table_id, "EXA", 3))){ - mark_tsc_unstable("Summit based system"); - use_cyclone = 1; /*enable cyclone-timer*/ - setup_summit(); - return 1; - } - return 0; -} - -struct rio_table_hdr { - unsigned char version; /* Version number of this data structure */ - /* Version 3 adds chassis_num & WP_index */ - unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil) */ - unsigned char num_rio_dev; /* # of RIO I/O devices (Cyclones and Winnipegs) */ -} __attribute__((packed)); - -struct scal_detail { - unsigned char node_id; /* Scalability Node ID */ - unsigned long CBAR; /* Address of 1MB register space */ - unsigned char port0node; /* Node ID port connected to: 0xFF=None */ - unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char port1node; /* Node ID port connected to: 0xFF = None */ - unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char port2node; /* Node ID port connected to: 0xFF = None */ - unsigned char port2port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char chassis_num; /* 1 based Chassis number (1 = boot node) */ -} __attribute__((packed)); - -struct rio_detail { - unsigned char node_id; /* RIO Node ID */ - unsigned long BBAR; /* Address of 1MB register space */ - unsigned char type; /* Type of device */ - unsigned char owner_id; /* For WPEG: Node ID of Cyclone that owns this WPEG*/ - /* For CYC: Node ID of Twister that owns this CYC */ - unsigned char port0node; /* Node ID port connected to: 0xFF=None */ - unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char port1node; /* Node ID port connected to: 0xFF=None */ - unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char first_slot; /* For WPEG: Lowest slot number below this WPEG */ - /* For CYC: 0 */ - unsigned char status; /* For WPEG: Bit 0 = 1 : the XAPIC is used */ - /* = 0 : the XAPIC is not used, ie:*/ - /* ints fwded to another XAPIC */ - /* Bits1:7 Reserved */ - /* For CYC: Bits0:7 Reserved */ - unsigned char WP_index; /* For WPEG: WPEG instance index - lower ones have */ - /* lower slot numbers/PCI bus numbers */ - /* For CYC: No meaning */ - unsigned char chassis_num; /* 1 based Chassis number */ - /* For LookOut WPEGs this field indicates the */ - /* Expansion Chassis #, enumerated from Boot */ - /* Node WPEG external port, then Boot Node CYC */ - /* external port, then Next Vigil chassis WPEG */ - /* external port, etc. */ - /* Shared Lookouts have only 1 chassis number (the */ - /* first one assigned) */ -} __attribute__((packed)); - - -typedef enum { - CompatTwister = 0, /* Compatibility Twister */ - AltTwister = 1, /* Alternate Twister of internal 8-way */ - CompatCyclone = 2, /* Compatibility Cyclone */ - AltCyclone = 3, /* Alternate Cyclone of internal 8-way */ - CompatWPEG = 4, /* Compatibility WPEG */ - AltWPEG = 5, /* Second Planar WPEG */ - LookOutAWPEG = 6, /* LookOut WPEG */ - LookOutBWPEG = 7, /* LookOut WPEG */ -} node_type; - -static inline int is_WPEG(struct rio_detail *rio){ - return (rio->type == CompatWPEG || rio->type == AltWPEG || - rio->type == LookOutAWPEG || rio->type == LookOutBWPEG); -} - -#define SUMMIT_APIC_DFR_VALUE (APIC_DFR_CLUSTER) - -static const struct cpumask *summit_target_cpus(void) -{ - /* CPU_MASK_ALL (0xff) has undefined behaviour with - * dest_LowestPrio mode logical clustered apic interrupt routing - * Just start on cpu 0. IRQ balancing will spread load - */ - return cpumask_of(0); -} - -static unsigned long summit_check_apicid_used(physid_mask_t *map, int apicid) -{ - return 0; -} - -/* we don't use the phys_cpu_present_map to indicate apicid presence */ -static unsigned long summit_check_apicid_present(int bit) -{ - return 1; -} - -static int summit_early_logical_apicid(int cpu) -{ - int count = 0; - u8 my_id = early_per_cpu(x86_cpu_to_apicid, cpu); - u8 my_cluster = APIC_CLUSTER(my_id); -#ifdef CONFIG_SMP - u8 lid; - int i; - - /* Create logical APIC IDs by counting CPUs already in cluster. */ - for (count = 0, i = nr_cpu_ids; --i >= 0; ) { - lid = early_per_cpu(x86_cpu_to_logical_apicid, i); - if (lid != BAD_APICID && APIC_CLUSTER(lid) == my_cluster) - ++count; - } -#endif - /* We only have a 4 wide bitmap in cluster mode. If a deranged - * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */ - BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT); - return my_cluster | (1UL << count); -} - -static void summit_init_apic_ldr(void) -{ - int cpu = smp_processor_id(); - unsigned long id = early_per_cpu(x86_cpu_to_logical_apicid, cpu); - unsigned long val; - - apic_write(APIC_DFR, SUMMIT_APIC_DFR_VALUE); - val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; - val |= SET_APIC_LOGICAL_ID(id); - apic_write(APIC_LDR, val); -} - -static int summit_apic_id_registered(void) -{ - return 1; -} - -static void summit_setup_apic_routing(void) -{ - pr_info("Enabling APIC mode: Summit. Using %d I/O APICs\n", - nr_ioapics); -} - -static int summit_cpu_present_to_apicid(int mps_cpu) -{ - if (mps_cpu < nr_cpu_ids) - return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu); - else - return BAD_APICID; -} - -static void summit_ioapic_phys_id_map(physid_mask_t *phys_id_map, physid_mask_t *retmap) -{ - /* For clustered we don't have a good way to do this yet - hack */ - physids_promote(0x0FL, retmap); -} - -static void summit_apicid_to_cpu_present(int apicid, physid_mask_t *retmap) -{ - physid_set_mask_of_physid(0, retmap); -} - -static int summit_check_phys_apicid_present(int physical_apicid) -{ - return 1; -} - -static inline int -summit_cpu_mask_to_apicid(const struct cpumask *cpumask, unsigned int *dest_id) -{ - unsigned int round = 0; - unsigned int cpu, apicid = 0; - - /* - * The cpus in the mask must all be on the apic cluster. - */ - for_each_cpu_and(cpu, cpumask, cpu_online_mask) { - int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu); - - if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) { - pr_err("Not a valid mask!\n"); - return -EINVAL; - } - apicid |= new_apicid; - round++; - } - if (!round) - return -EINVAL; - *dest_id = apicid; - return 0; -} - -static int -summit_cpu_mask_to_apicid_and(const struct cpumask *inmask, - const struct cpumask *andmask, - unsigned int *apicid) -{ - cpumask_var_t cpumask; - *apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0); - - if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC)) - return 0; - - cpumask_and(cpumask, inmask, andmask); - summit_cpu_mask_to_apicid(cpumask, apicid); - - free_cpumask_var(cpumask); - - return 0; -} - -/* - * cpuid returns the value latched in the HW at reset, not the APIC ID - * register's value. For any box whose BIOS changes APIC IDs, like - * clustered APIC systems, we must use hard_smp_processor_id. - * - * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID. - */ -static int summit_phys_pkg_id(int cpuid_apic, int index_msb) -{ - return hard_smp_processor_id() >> index_msb; -} - -static int probe_summit(void) -{ - /* probed later in mptable/ACPI hooks */ - return 0; -} - -#ifdef CONFIG_X86_SUMMIT_NUMA -static struct rio_table_hdr *rio_table_hdr; -static struct scal_detail *scal_devs[MAX_NUMNODES]; -static struct rio_detail *rio_devs[MAX_NUMNODES*4]; - -#ifndef CONFIG_X86_NUMAQ -static int mp_bus_id_to_node[MAX_MP_BUSSES]; -#endif - -static int setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus) -{ - int twister = 0, node = 0; - int i, bus, num_buses; - - for (i = 0; i < rio_table_hdr->num_rio_dev; i++) { - if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id) { - twister = rio_devs[i]->owner_id; - break; - } - } - if (i == rio_table_hdr->num_rio_dev) { - pr_err("Couldn't find owner Cyclone for Winnipeg!\n"); - return last_bus; - } - - for (i = 0; i < rio_table_hdr->num_scal_dev; i++) { - if (scal_devs[i]->node_id == twister) { - node = scal_devs[i]->node_id; - break; - } - } - if (i == rio_table_hdr->num_scal_dev) { - pr_err("Couldn't find owner Twister for Cyclone!\n"); - return last_bus; - } - - switch (rio_devs[wpeg_num]->type) { - case CompatWPEG: - /* - * The Compatibility Winnipeg controls the 2 legacy buses, - * the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case - * a PCI-PCI bridge card is used in either slot: total 5 buses. - */ - num_buses = 5; - break; - case AltWPEG: - /* - * The Alternate Winnipeg controls the 2 133MHz buses [1 slot - * each], their 2 "extra" buses, the 100MHz bus [2 slots] and - * the "extra" buses for each of those slots: total 7 buses. - */ - num_buses = 7; - break; - case LookOutAWPEG: - case LookOutBWPEG: - /* - * A Lookout Winnipeg controls 3 100MHz buses [2 slots each] - * & the "extra" buses for each of those slots: total 9 buses. - */ - num_buses = 9; - break; - default: - pr_info("Unsupported Winnipeg type!\n"); - return last_bus; - } - - for (bus = last_bus; bus < last_bus + num_buses; bus++) - mp_bus_id_to_node[bus] = node; - return bus; -} - -static int build_detail_arrays(void) -{ - unsigned long ptr; - int i, scal_detail_size, rio_detail_size; - - if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) { - pr_warn("MAX_NUMNODES too low! Defined as %d, but system has %d nodes\n", - MAX_NUMNODES, rio_table_hdr->num_scal_dev); - return 0; - } - - switch (rio_table_hdr->version) { - default: - pr_warn("Invalid Rio Grande Table Version: %d\n", - rio_table_hdr->version); - return 0; - case 2: - scal_detail_size = 11; - rio_detail_size = 13; - break; - case 3: - scal_detail_size = 12; - rio_detail_size = 15; - break; - } - - ptr = (unsigned long)rio_table_hdr + 3; - for (i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size) - scal_devs[i] = (struct scal_detail *)ptr; - - for (i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size) - rio_devs[i] = (struct rio_detail *)ptr; - - return 1; -} - -void setup_summit(void) -{ - unsigned long ptr; - unsigned short offset; - int i, next_wpeg, next_bus = 0; - - /* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */ - ptr = get_bios_ebda(); - ptr = (unsigned long)phys_to_virt(ptr); - - rio_table_hdr = NULL; - offset = 0x180; - while (offset) { - /* The block id is stored in the 2nd word */ - if (*((unsigned short *)(ptr + offset + 2)) == 0x4752) { - /* set the pointer past the offset & block id */ - rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4); - break; - } - /* The next offset is stored in the 1st word. 0 means no more */ - offset = *((unsigned short *)(ptr + offset)); - } - if (!rio_table_hdr) { - pr_err("Unable to locate Rio Grande Table in EBDA - bailing!\n"); - return; - } - - if (!build_detail_arrays()) - return; - - /* The first Winnipeg we're looking for has an index of 0 */ - next_wpeg = 0; - do { - for (i = 0; i < rio_table_hdr->num_rio_dev; i++) { - if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg) { - /* It's the Winnipeg we're looking for! */ - next_bus = setup_pci_node_map_for_wpeg(i, next_bus); - next_wpeg++; - break; - } - } - /* - * If we go through all Rio devices and don't find one with - * the next index, it means we've found all the Winnipegs, - * and thus all the PCI buses. - */ - if (i == rio_table_hdr->num_rio_dev) - next_wpeg = 0; - } while (next_wpeg != 0); -} -#endif - -static struct apic apic_summit = { - - .name = "summit", - .probe = probe_summit, - .acpi_madt_oem_check = summit_acpi_madt_oem_check, - .apic_id_valid = default_apic_id_valid, - .apic_id_registered = summit_apic_id_registered, - - .irq_delivery_mode = dest_LowestPrio, - /* logical delivery broadcast to all CPUs: */ - .irq_dest_mode = 1, - - .target_cpus = summit_target_cpus, - .disable_esr = 1, - .dest_logical = APIC_DEST_LOGICAL, - .check_apicid_used = summit_check_apicid_used, - .check_apicid_present = summit_check_apicid_present, - - .vector_allocation_domain = flat_vector_allocation_domain, - .init_apic_ldr = summit_init_apic_ldr, - - .ioapic_phys_id_map = summit_ioapic_phys_id_map, - .setup_apic_routing = summit_setup_apic_routing, - .multi_timer_check = NULL, - .cpu_present_to_apicid = summit_cpu_present_to_apicid, - .apicid_to_cpu_present = summit_apicid_to_cpu_present, - .setup_portio_remap = NULL, - .check_phys_apicid_present = summit_check_phys_apicid_present, - .enable_apic_mode = NULL, - .phys_pkg_id = summit_phys_pkg_id, - .mps_oem_check = summit_mps_oem_check, - - .get_apic_id = summit_get_apic_id, - .set_apic_id = NULL, - .apic_id_mask = 0xFF << 24, - - .cpu_mask_to_apicid_and = summit_cpu_mask_to_apicid_and, - - .send_IPI_mask = summit_send_IPI_mask, - .send_IPI_mask_allbutself = NULL, - .send_IPI_allbutself = summit_send_IPI_allbutself, - .send_IPI_all = summit_send_IPI_all, - .send_IPI_self = default_send_IPI_self, - - .trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW, - .trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH, - - .wait_for_init_deassert = true, - .smp_callin_clear_local_apic = NULL, - .inquire_remote_apic = default_inquire_remote_apic, - - .read = native_apic_mem_read, - .write = native_apic_mem_write, - .eoi_write = native_apic_mem_write, - .icr_read = native_apic_icr_read, - .icr_write = native_apic_icr_write, - .wait_icr_idle = native_apic_wait_icr_idle, - .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, - - .x86_32_early_logical_apicid = summit_early_logical_apicid, -}; - -apic_driver(apic_summit); diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index c7ca50a9c232..3a85bf3f1390 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -1,6 +1,5 @@ obj-$(CONFIG_CLKSRC_OF) += clksrc-of.o obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o -obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC) += cs5535-clockevt.o diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c deleted file mode 100644 index 9e0998f22885..000000000000 --- a/drivers/clocksource/cyclone.c +++ /dev/null @@ -1,113 +0,0 @@ -#include <linux/clocksource.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/timex.h> -#include <linux/init.h> - -#include <asm/pgtable.h> -#include <asm/io.h> - -#include <asm/mach_timer.h> - -#define CYCLONE_CBAR_ADDR 0xFEB00CD0 /* base address ptr */ -#define CYCLONE_PMCC_OFFSET 0x51A0 /* offset to control register */ -#define CYCLONE_MPCS_OFFSET 0x51A8 /* offset to select register */ -#define CYCLONE_MPMC_OFFSET 0x51D0 /* offset to count register */ -#define CYCLONE_TIMER_FREQ 99780000 /* 100Mhz, but not really */ -#define CYCLONE_TIMER_MASK CLOCKSOURCE_MASK(32) /* 32 bit mask */ - -int use_cyclone = 0; -static void __iomem *cyclone_ptr; - -static cycle_t read_cyclone(struct clocksource *cs) -{ - return (cycle_t)readl(cyclone_ptr); -} - -static struct clocksource clocksource_cyclone = { - .name = "cyclone", - .rating = 250, - .read = read_cyclone, - .mask = CYCLONE_TIMER_MASK, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int __init init_cyclone_clocksource(void) -{ - unsigned long base; /* saved value from CBAR */ - unsigned long offset; - u32 __iomem* volatile cyclone_timer; /* Cyclone MPMC0 register */ - u32 __iomem* reg; - int i; - - /* make sure we're on a summit box: */ - if (!use_cyclone) - return -ENODEV; - - printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n"); - - /* find base address: */ - offset = CYCLONE_CBAR_ADDR; - reg = ioremap_nocache(offset, sizeof(reg)); - if (!reg) { - printk(KERN_ERR "Summit chipset: Could not find valid CBAR register.\n"); - return -ENODEV; - } - /* even on 64bit systems, this is only 32bits: */ - base = readl(reg); - iounmap(reg); - if (!base) { - printk(KERN_ERR "Summit chipset: Could not find valid CBAR value.\n"); - return -ENODEV; - } - - /* setup PMCC: */ - offset = base + CYCLONE_PMCC_OFFSET; - reg = ioremap_nocache(offset, sizeof(reg)); - if (!reg) { - printk(KERN_ERR "Summit chipset: Could not find valid PMCC register.\n"); - return -ENODEV; - } - writel(0x00000001,reg); - iounmap(reg); - - /* setup MPCS: */ - offset = base + CYCLONE_MPCS_OFFSET; - reg = ioremap_nocache(offset, sizeof(reg)); - if (!reg) { - printk(KERN_ERR "Summit chipset: Could not find valid MPCS register.\n"); - return -ENODEV; - } - writel(0x00000001,reg); - iounmap(reg); - - /* map in cyclone_timer: */ - offset = base + CYCLONE_MPMC_OFFSET; - cyclone_timer = ioremap_nocache(offset, sizeof(u64)); - if (!cyclone_timer) { - printk(KERN_ERR "Summit chipset: Could not find valid MPMC register.\n"); - return -ENODEV; - } - - /* quick test to make sure its ticking: */ - for (i = 0; i < 3; i++){ - u32 old = readl(cyclone_timer); - int stall = 100; - - while (stall--) - barrier(); - - if (readl(cyclone_timer) == old) { - printk(KERN_ERR "Summit chipset: Counter not counting! DISABLED\n"); - iounmap(cyclone_timer); - cyclone_timer = NULL; - return -ENODEV; - } - } - cyclone_ptr = cyclone_timer; - - return clocksource_register_hz(&clocksource_cyclone, - CYCLONE_TIMER_FREQ); -} - -arch_initcall(init_cyclone_clocksource); |