aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/boot/dts/mpc832x_rdb.dts2
-rw-r--r--arch/powerpc/platforms/83xx/mpc832x_rdb.c46
2 files changed, 47 insertions, 1 deletions
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index cdc4a94e9c28..388c8a7012e1 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -175,7 +175,7 @@
reg = <4c0 40>;
interrupts = <2>;
interrupt-parent = <&qeic>;
- mode = "cpu";
+ mode = "cpu-qe";
};
spi@500 {
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index e6c1760f36ef..24a790c79ec0 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -15,6 +15,7 @@
*/
#include <linux/pci.h>
+#include <linux/spi/spi.h>
#include <asm/of_platform.h>
#include <asm/time.h>
@@ -22,6 +23,7 @@
#include <asm/udbg.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>
+#include <sysdev/fsl_soc.h>
#include "mpc83xx.h"
@@ -32,6 +34,50 @@
#define DBG(fmt...)
#endif
+static void mpc83xx_spi_activate_cs(u8 cs, u8 polarity)
+{
+ pr_debug("%s %d %d\n", __func__, cs, polarity);
+ par_io_data_set(3, 13, polarity);
+}
+
+static void mpc83xx_spi_deactivate_cs(u8 cs, u8 polarity)
+{
+ pr_debug("%s %d %d\n", __func__, cs, polarity);
+ par_io_data_set(3, 13, !polarity);
+}
+
+static struct spi_board_info mpc832x_spi_boardinfo = {
+ .bus_num = 0x4c0,
+ .chip_select = 0,
+ .max_speed_hz = 50000000,
+ /*
+ * XXX: This is spidev (spi in userspace) stub, should
+ * be replaced by "mmc_spi" when mmc_spi will hit mainline.
+ */
+ .modalias = "spidev",
+};
+
+static int __init mpc832x_spi_init(void)
+{
+ if (!machine_is(mpc832x_rdb))
+ return 0;
+
+ par_io_config_pin(3, 0, 3, 0, 1, 0); /* SPI1 MOSI, I/O */
+ par_io_config_pin(3, 1, 3, 0, 1, 0); /* SPI1 MISO, I/O */
+ par_io_config_pin(3, 2, 3, 0, 1, 0); /* SPI1 CLK, I/O */
+ par_io_config_pin(3, 3, 2, 0, 1, 0); /* SPI1 SEL, I */
+
+ par_io_config_pin(3, 13, 1, 0, 0, 0); /* !SD_CS, O */
+ par_io_config_pin(3, 14, 2, 0, 0, 0); /* SD_INSERT, I */
+ par_io_config_pin(3, 15, 2, 0, 0, 0); /* SD_PROTECT,I */
+
+ return fsl_spi_init(&mpc832x_spi_boardinfo, 1,
+ mpc83xx_spi_activate_cs,
+ mpc83xx_spi_deactivate_cs);
+}
+
+device_initcall(mpc832x_spi_init);
+
/* ************************************************************************
*
* Setup the architecture