diff options
| -rw-r--r-- | Documentation/devicetree/bindings/net/stmmac.txt | 6 | ||||
| -rw-r--r-- | Documentation/networking/stmmac.txt | 19 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 12 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 12 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 2 | ||||
| -rw-r--r-- | include/linux/stmmac.h | 2 |
6 files changed, 35 insertions, 18 deletions
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index b95ff998ba73..8080038ff1b2 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -34,7 +34,11 @@ Optional properties: platforms. - tx-fifo-depth: See ethernet.txt file in the same directory - rx-fifo-depth: See ethernet.txt file in the same directory -- snps,pbl Programmable Burst Length +- snps,pbl Programmable Burst Length (tx and rx) +- snps,txpbl Tx Programmable Burst Length. Only for GMAC and newer. + If set, DMA tx will use this value rather than snps,pbl. +- snps,rxpbl Rx Programmable Burst Length. Only for GMAC and newer. + If set, DMA rx will use this value rather than snps,pbl. - snps,aal Address-Aligned Beats - snps,fixed-burst Program the DMA to use the fixed burst mode - snps,mixed-burst Program the DMA to use the mixed burst mode diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt index 014f4f756cb7..6add57374f70 100644 --- a/Documentation/networking/stmmac.txt +++ b/Documentation/networking/stmmac.txt @@ -153,7 +153,8 @@ Where: o pbl: the Programmable Burst Length is maximum number of beats to be transferred in one DMA transaction. GMAC also enables the 4xPBL by default. - o fixed_burst/mixed_burst/burst_len + o txpbl/rxpbl: GMAC and newer supports independent DMA pbl for tx/rx. + o fixed_burst/mixed_burst/aal o clk_csr: fixed CSR Clock range selection. o has_gmac: uses the GMAC core. o enh_desc: if sets the MAC will use the enhanced descriptor structure. @@ -205,16 +206,22 @@ tuned according to the HW capabilities. struct stmmac_dma_cfg { int pbl; + int txpbl; + int rxpbl; int fixed_burst; - int burst_len_supported; + int mixed_burst; + bool aal; }; Where: - o pbl: Programmable Burst Length + o pbl: Programmable Burst Length (tx and rx) + o txpbl: Transmit Programmable Burst Length. Only for GMAC and newer. + If set, DMA tx will use this value rather than pbl. + o rxpbl: Receive Programmable Burst Length. Only for GMAC and newer. + If set, DMA rx will use this value rather than pbl. o fixed_burst: program the DMA to use the fixed burst mode - o burst_len: this is the value we put in the register - supported values are provided as macros in - linux/stmmac.h header file. + o mixed_burst: program the DMA to use the mixed burst mode + o aal: Address-Aligned Beats --- diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c index 318ae9f10104..99b8040af592 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c @@ -89,20 +89,20 @@ static void dwmac1000_dma_init(void __iomem *ioaddr, u32 dma_tx, u32 dma_rx, int atds) { u32 value = readl(ioaddr + DMA_BUS_MODE); + int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl; + int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl; /* * Set the DMA PBL (Programmable Burst Length) mode. * * Note: before stmmac core 3.50 this mode bit was 4xPBL, and * post 3.5 mode bit acts as 8*PBL. - * - * This configuration doesn't take care about the Separate PBL - * so only the bits: 13-8 are programmed with the PBL passed from the - * platform. */ value |= DMA_BUS_MODE_MAXPBL; - value &= ~DMA_BUS_MODE_PBL_MASK; - value |= (dma_cfg->pbl << DMA_BUS_MODE_PBL_SHIFT); + value |= DMA_BUS_MODE_USP; + value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK); + value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT); + value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT); /* Set the Fixed burst mode */ if (dma_cfg->fixed_burst) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c index 7d82a3464097..2c3b2098f350 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c @@ -71,11 +71,14 @@ static void dwmac4_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi) writel(value, ioaddr + DMA_SYS_BUS_MODE); } -static void dwmac4_dma_init_channel(void __iomem *ioaddr, int pbl, +static void dwmac4_dma_init_channel(void __iomem *ioaddr, + struct stmmac_dma_cfg *dma_cfg, u32 dma_tx_phy, u32 dma_rx_phy, u32 channel) { u32 value; + int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl; + int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl; /* set PBL for each channels. Currently we affect same configuration * on each channel @@ -85,11 +88,11 @@ static void dwmac4_dma_init_channel(void __iomem *ioaddr, int pbl, writel(value, ioaddr + DMA_CHAN_CONTROL(channel)); value = readl(ioaddr + DMA_CHAN_TX_CONTROL(channel)); - value = value | (pbl << DMA_BUS_MODE_PBL_SHIFT); + value = value | (txpbl << DMA_BUS_MODE_PBL_SHIFT); writel(value, ioaddr + DMA_CHAN_TX_CONTROL(channel)); value = readl(ioaddr + DMA_CHAN_RX_CONTROL(channel)); - value = value | (pbl << DMA_BUS_MODE_RPBL_SHIFT); + value = value | (rxpbl << DMA_BUS_MODE_RPBL_SHIFT); writel(value, ioaddr + DMA_CHAN_RX_CONTROL(channel)); /* Mask interrupts by writing to CSR7 */ @@ -120,8 +123,7 @@ static void dwmac4_dma_init(void __iomem *ioaddr, writel(value, ioaddr + DMA_SYS_BUS_MODE); for (i = 0; i < DMA_CHANNEL_NB_MAX; i++) - dwmac4_dma_init_channel(ioaddr, dma_cfg->pbl, - dma_tx, dma_rx, i); + dwmac4_dma_init_channel(ioaddr, dma_cfg, dma_tx, dma_rx, i); } static void _dwmac4_dump_dma_regs(void __iomem *ioaddr, u32 channel) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 81800f23a9c4..96afe0561c99 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -315,6 +315,8 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl); if (!dma_cfg->pbl) dma_cfg->pbl = DEFAULT_DMA_PBL; + of_property_read_u32(np, "snps,txpbl", &dma_cfg->txpbl); + of_property_read_u32(np, "snps,rxpbl", &dma_cfg->rxpbl); dma_cfg->aal = of_property_read_bool(np, "snps,aal"); dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst"); diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 3537fb33cc90..e6d7a5940819 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -88,6 +88,8 @@ struct stmmac_mdio_bus_data { struct stmmac_dma_cfg { int pbl; + int txpbl; + int rxpbl; int fixed_burst; int mixed_burst; bool aal; |