aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c42
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h4
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c2
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c153
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c33
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c23
6 files changed, 134 insertions, 123 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index d724a18b5285..3254b9e7c2ea 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -953,15 +953,16 @@ void __bnx2x_link_report(struct bnx2x *bp)
netdev_err(bp->dev, "NIC Link is Down\n");
return;
} else {
+ const char *duplex;
+ const char *flow;
+
netif_carrier_on(bp->dev);
- netdev_info(bp->dev, "NIC Link is Up, ");
- pr_cont("%d Mbps ", cur_data.line_speed);
if (test_and_clear_bit(BNX2X_LINK_REPORT_FD,
&cur_data.link_report_flags))
- pr_cont("full duplex");
+ duplex = "full";
else
- pr_cont("half duplex");
+ duplex = "half";
/* Handle the FC at the end so that only these flags would be
* possibly set. This way we may easily check if there is no FC
@@ -970,16 +971,19 @@ void __bnx2x_link_report(struct bnx2x *bp)
if (cur_data.link_report_flags) {
if (test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
&cur_data.link_report_flags)) {
- pr_cont(", receive ");
if (test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
&cur_data.link_report_flags))
- pr_cont("& transmit ");
+ flow = "ON - receive & transmit";
+ else
+ flow = "ON - receive";
} else {
- pr_cont(", transmit ");
+ flow = "ON - transmit";
}
- pr_cont("flow control ON");
+ } else {
+ flow = "none";
}
- pr_cont("\n");
+ netdev_info(bp->dev, "NIC Link is Up, %d Mbps %s duplex, Flow control: %s\n",
+ cur_data.line_speed, duplex, flow);
}
}
@@ -2584,7 +2588,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
#endif
/* enable this debug print to view the transmission queue being used
- DP(BNX2X_MSG_FP, "indices: txq %d, fp %d, txdata %d",
+ DP(BNX2X_MSG_FP, "indices: txq %d, fp %d, txdata %d\n",
txq_index, fp_index, txdata_index); */
/* locate the fastpath and the txdata */
@@ -2593,7 +2597,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
/* enable this debug print to view the tranmission details
DP(BNX2X_MSG_FP,"transmitting packet cid %d fp index %d txdata_index %d"
- " tx_data ptr %p fp pointer %p",
+ " tx_data ptr %p fp pointer %p\n",
txdata->cid, fp_index, txdata_index, txdata, fp); */
if (unlikely(bnx2x_tx_avail(bp, txdata) <
@@ -2910,14 +2914,14 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
/* requested to support too many traffic classes */
if (num_tc > bp->max_cos) {
DP(NETIF_MSG_TX_ERR, "support for too many traffic classes"
- " requested: %d. max supported is %d",
+ " requested: %d. max supported is %d\n",
num_tc, bp->max_cos);
return -EINVAL;
}
/* declare amount of supported traffic classes */
if (netdev_set_num_tc(dev, num_tc)) {
- DP(NETIF_MSG_TX_ERR, "failed to declare %d traffic classes",
+ DP(NETIF_MSG_TX_ERR, "failed to declare %d traffic classes\n",
num_tc);
return -EINVAL;
}
@@ -2925,7 +2929,7 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
/* configure priority to traffic class mapping */
for (prio = 0; prio < BNX2X_MAX_PRIORITY; prio++) {
netdev_set_prio_tc_map(dev, prio, bp->prio_to_cos[prio]);
- DP(BNX2X_MSG_SP, "mapping priority %d to tc %d",
+ DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n",
prio, bp->prio_to_cos[prio]);
}
@@ -2934,10 +2938,10 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
This can be used for ets or pfc, and save the effort of setting
up a multio class queue disc or negotiating DCBX with a switch
netdev_set_prio_tc_map(dev, 0, 0);
- DP(BNX2X_MSG_SP, "mapping priority %d to tc %d", 0, 0);
+ DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n", 0, 0);
for (prio = 1; prio < 16; prio++) {
netdev_set_prio_tc_map(dev, prio, 1);
- DP(BNX2X_MSG_SP, "mapping priority %d to tc %d", prio, 1);
+ DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n", prio, 1);
} */
/* configure traffic class to transmission queue mapping */
@@ -2945,7 +2949,7 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
count = BNX2X_NUM_ETH_QUEUES(bp);
offset = cos * MAX_TXQS_PER_COS;
netdev_set_tc_queue(dev, cos, count, offset);
- DP(BNX2X_MSG_SP, "mapping tc %d to offset %d count %d",
+ DP(BNX2X_MSG_SP, "mapping tc %d to offset %d count %d\n",
cos, offset, count);
}
@@ -3033,7 +3037,7 @@ static void bnx2x_free_fp_mem_at(struct bnx2x *bp, int fp_index)
struct bnx2x_fp_txdata *txdata = &fp->txdata[cos];
DP(BNX2X_MSG_SP,
- "freeing tx memory of fp %d cos %d cid %d",
+ "freeing tx memory of fp %d cos %d cid %d\n",
fp_index, cos, txdata->cid);
BNX2X_FREE(txdata->tx_buf_ring);
@@ -3115,7 +3119,7 @@ static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index)
struct bnx2x_fp_txdata *txdata = &fp->txdata[cos];
DP(BNX2X_MSG_SP, "allocating tx memory of "
- "fp %d cos %d",
+ "fp %d cos %d\n",
index, cos);
BNX2X_ALLOC(txdata->tx_buf_ring,
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index 223bfeebc597..501a24b4767e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -1289,7 +1289,7 @@ static inline void bnx2x_init_txdata(struct bnx2x *bp,
txdata->txq_index = txq_index;
txdata->tx_cons_sb = tx_cons_sb;
- DP(BNX2X_MSG_SP, "created tx data cid %d, txq %d",
+ DP(BNX2X_MSG_SP, "created tx data cid %d, txq %d\n",
txdata->cid, txdata->txq_index);
}
@@ -1333,7 +1333,7 @@ static inline void bnx2x_init_fcoe_fp(struct bnx2x *bp)
bnx2x_init_txdata(bp, &bnx2x_fcoe(bp, txdata[0]),
fp->cid, FCOE_TXQ_IDX(bp), BNX2X_FCOE_L2_TX_INDEX);
- DP(BNX2X_MSG_SP, "created fcoe tx data (fp index %d)", fp->index);
+ DP(BNX2X_MSG_SP, "created fcoe tx data (fp index %d)\n", fp->index);
/* qZone id equals to FW (per path) client id */
bnx2x_fcoe(bp, cl_qzone_id) = bnx2x_fp_qzone_id(fp);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
index a4ea35f6a456..38b5ca527a32 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
@@ -350,7 +350,7 @@ static void bnx2x_dcbx_map_nw(struct bnx2x *bp)
if (cos_params[i].pri_bitmask & nw_prio) {
/* extend the bitmask with unmapped */
DP(NETIF_MSG_LINK,
- "cos %d extended with 0x%08x", i, unmapped);
+ "cos %d extended with 0x%08x\n", i, unmapped);
cos_params[i].pri_bitmask |= unmapped;
break;
}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index d45b1555a602..e3de6fedf218 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -694,8 +694,8 @@ static int bnx2x_ets_e3b0_disabled(const struct link_params *params,
struct bnx2x *bp = params->bp;
if (!CHIP_IS_E3B0(bp)) {
- DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_disabled the chip isn't E3B0"
- "\n");
+ DP(NETIF_MSG_LINK,
+ "bnx2x_ets_e3b0_disabled the chip isn't E3B0\n");
return -EINVAL;
}
@@ -854,8 +854,8 @@ static int bnx2x_ets_e3b0_get_total_bw(
if (bnx2x_cos_state_bw == ets_params->cos[cos_idx].state) {
if (0 == ets_params->cos[cos_idx].params.bw_params.bw) {
- DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config BW"
- "was set to 0\n");
+ DP(NETIF_MSG_LINK,
+ "bnx2x_ets_E3B0_config BW was set to 0\n");
return -EINVAL;
}
*total_bw +=
@@ -866,12 +866,12 @@ static int bnx2x_ets_e3b0_get_total_bw(
/*Check taotl BW is valid */
if ((100 != *total_bw) || (0 == *total_bw)) {
if (0 == *total_bw) {
- DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW"
- "shouldn't be 0\n");
+ DP(NETIF_MSG_LINK,
+ "bnx2x_ets_E3B0_config toatl BW shouldn't be 0\n");
return -EINVAL;
}
- DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW should be"
- "100\n");
+ DP(NETIF_MSG_LINK,
+ "bnx2x_ets_E3B0_config toatl BW should be 100\n");
/**
* We can handle a case whre the BW isn't 100 this can happen
* if the TC are joined.
@@ -908,13 +908,13 @@ static int bnx2x_ets_e3b0_sp_pri_to_cos_set(const struct link_params *params,
if (DCBX_INVALID_COS != sp_pri_to_cos[pri]) {
DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid "
- "parameter There can't be two COS's with"
+ "parameter There can't be two COS's with "
"the same strict pri\n");
return -EINVAL;
}
if (pri > max_num_of_cos) {
- DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid"
+ DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid "
"parameter Illegal strict priority\n");
return -EINVAL;
}
@@ -1090,8 +1090,8 @@ int bnx2x_ets_e3b0_config(const struct link_params *params,
u8 cos_entry = 0;
if (!CHIP_IS_E3B0(bp)) {
- DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_disabled the chip isn't E3B0"
- "\n");
+ DP(NETIF_MSG_LINK,
+ "bnx2x_ets_e3b0_disabled the chip isn't E3B0\n");
return -EINVAL;
}
@@ -1108,8 +1108,8 @@ int bnx2x_ets_e3b0_config(const struct link_params *params,
bnx2x_status = bnx2x_ets_e3b0_get_total_bw(params, ets_params,
&total_bw);
if (0 != bnx2x_status) {
- DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config get_total_bw failed "
- "\n");
+ DP(NETIF_MSG_LINK,
+ "bnx2x_ets_E3B0_config get_total_bw failed\n");
return -EINVAL;
}
@@ -1144,13 +1144,13 @@ int bnx2x_ets_e3b0_config(const struct link_params *params,
cos_entry);
} else {
- DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_config cos state not"
- " valid\n");
+ DP(NETIF_MSG_LINK,
+ "bnx2x_ets_e3b0_config cos state not valid\n");
return -EINVAL;
}
if (0 != bnx2x_status) {
- DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_config set cos bw "
- "failed\n");
+ DP(NETIF_MSG_LINK,
+ "bnx2x_ets_e3b0_config set cos bw failed\n");
return bnx2x_status;
}
}
@@ -1160,8 +1160,8 @@ int bnx2x_ets_e3b0_config(const struct link_params *params,
sp_pri_to_cos);
if (0 != bnx2x_status) {
- DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config set_pri_cli_reg "
- "failed\n");
+ DP(NETIF_MSG_LINK,
+ "bnx2x_ets_E3B0_config set_pri_cli_reg failed\n");
return bnx2x_status;
}
@@ -1618,8 +1618,8 @@ static void bnx2x_xmac_init(struct bnx2x *bp, u32 max_speed)
if (is_port4mode && (REG_RD(bp, MISC_REG_RESET_REG_2) &
MISC_REGISTERS_RESET_REG_2_XMAC)) {
- DP(NETIF_MSG_LINK, "XMAC already out of reset"
- " in 4-port mode\n");
+ DP(NETIF_MSG_LINK,
+ "XMAC already out of reset in 4-port mode\n");
return;
}
@@ -1642,13 +1642,13 @@ static void bnx2x_xmac_init(struct bnx2x *bp, u32 max_speed)
/* Set the number of ports on the system side to 1 */
REG_WR(bp, MISC_REG_XMAC_CORE_PORT_MODE, 0);
if (max_speed == SPEED_10000) {
- DP(NETIF_MSG_LINK, "Init XMAC to 10G x 1"
- " port per path\n");
+ DP(NETIF_MSG_LINK,
+ "Init XMAC to 10G x 1 port per path\n");
/* Set the number of ports on the Warp Core to 10G */
REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 3);
} else {
- DP(NETIF_MSG_LINK, "Init XMAC to 20G x 2 ports"
- " per path\n");
+ DP(NETIF_MSG_LINK,
+ "Init XMAC to 20G x 2 ports per path\n");
/* Set the number of ports on the Warp Core to 20G */
REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 1);
}
@@ -3959,8 +3959,8 @@ static void bnx2x_warpcore_set_sgmii_speed(struct bnx2x_phy *phy,
val16 |= 0x0040;
break;
default:
- DP(NETIF_MSG_LINK, "Speed not supported: 0x%x"
- "\n", phy->req_line_speed);
+ DP(NETIF_MSG_LINK,
+ "Speed not supported: 0x%x\n", phy->req_line_speed);
return;
}
@@ -4092,9 +4092,9 @@ static int bnx2x_get_mod_abs_int_cfg(struct bnx2x *bp,
*/
if ((cfg_pin < PIN_CFG_GPIO0_P0) ||
(cfg_pin > PIN_CFG_GPIO3_P1)) {
- DP(NETIF_MSG_LINK, "ERROR: Invalid cfg pin %x for "
- "module detect indication\n",
- cfg_pin);
+ DP(NETIF_MSG_LINK,
+ "ERROR: Invalid cfg pin %x for module detect indication\n",
+ cfg_pin);
return -EINVAL;
}
@@ -4222,8 +4222,9 @@ static void bnx2x_warpcore_config_init(struct bnx2x_phy *phy,
break;
default:
- DP(NETIF_MSG_LINK, "Unsupported Serdes Net Interface "
- "0x%x\n", serdes_net_if);
+ DP(NETIF_MSG_LINK,
+ "Unsupported Serdes Net Interface 0x%x\n",
+ serdes_net_if);
return;
}
}
@@ -6127,8 +6128,8 @@ static int bnx2x_link_initialize(struct link_params *params,
if (phy_index == EXT_PHY2 &&
(bnx2x_phy_selection(params) ==
PORT_HW_CFG_PHY_SELECTION_FIRST_PHY)) {
- DP(NETIF_MSG_LINK, "Not initializing"
- " second phy\n");
+ DP(NETIF_MSG_LINK,
+ "Not initializing second phy\n");
continue;
}
params->phy[phy_index].config_init(
@@ -6447,8 +6448,8 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars)
*/
if (active_external_phy == EXT_PHY1) {
if (params->phy[EXT_PHY2].phy_specific_func) {
- DP(NETIF_MSG_LINK, "Disabling TX on"
- " EXT_PHY2\n");
+ DP(NETIF_MSG_LINK,
+ "Disabling TX on EXT_PHY2\n");
params->phy[EXT_PHY2].phy_specific_func(
&params->phy[EXT_PHY2],
params, DISABLE_TX);
@@ -7341,8 +7342,8 @@ static int bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy,
u16 val = 0;
u16 i;
if (byte_cnt > 16) {
- DP(NETIF_MSG_LINK, "Reading from eeprom is"
- " is limited to 0xf\n");
+ DP(NETIF_MSG_LINK,
+ "Reading from eeprom is limited to 0xf\n");
return -EINVAL;
}
/* Set the read command byte count */
@@ -7413,8 +7414,8 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
" addr %d, cnt %d\n",
addr, byte_cnt);*/
if (byte_cnt > 16) {
- DP(NETIF_MSG_LINK, "Reading from eeprom is"
- " is limited to 16 bytes\n");
+ DP(NETIF_MSG_LINK,
+ "Reading from eeprom is limited to 16 bytes\n");
return -EINVAL;
}
@@ -7443,8 +7444,8 @@ static int bnx2x_8727_read_sfp_module_eeprom(struct bnx2x_phy *phy,
u16 val, i;
if (byte_cnt > 16) {
- DP(NETIF_MSG_LINK, "Reading from eeprom is"
- " is limited to 0xf\n");
+ DP(NETIF_MSG_LINK,
+ "Reading from eeprom is limited to 0xf\n");
return -EINVAL;
}
@@ -7591,13 +7592,14 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy,
check_limiting_mode = 1;
} else if (copper_module_type &
SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) {
- DP(NETIF_MSG_LINK, "Passive Copper"
- " cable detected\n");
+ DP(NETIF_MSG_LINK,
+ "Passive Copper cable detected\n");
*edc_mode =
EDC_MODE_PASSIVE_DAC;
} else {
- DP(NETIF_MSG_LINK, "Unknown copper-cable-"
- "type 0x%x !!!\n", copper_module_type);
+ DP(NETIF_MSG_LINK,
+ "Unknown copper-cable-type 0x%x !!!\n",
+ copper_module_type);
return -EINVAL;
}
break;
@@ -7635,8 +7637,8 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy,
SFP_EEPROM_OPTIONS_ADDR,
SFP_EEPROM_OPTIONS_SIZE,
options) != 0) {
- DP(NETIF_MSG_LINK, "Failed to read Option"
- " field from module EEPROM\n");
+ DP(NETIF_MSG_LINK,
+ "Failed to read Option field from module EEPROM\n");
return -EINVAL;
}
if ((options[0] & SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK))
@@ -7677,15 +7679,15 @@ static int bnx2x_verify_sfp_module(struct bnx2x_phy *phy,
FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY) {
/* Use first phy request only in case of non-dual media*/
if (DUAL_MEDIA(params)) {
- DP(NETIF_MSG_LINK, "FW does not support OPT MDL "
- "verification\n");
+ DP(NETIF_MSG_LINK,
+ "FW does not support OPT MDL verification\n");
return -EINVAL;
}
cmd = DRV_MSG_CODE_VRFY_FIRST_PHY_OPT_MDL;
} else {
/* No support in OPT MDL detection */
- DP(NETIF_MSG_LINK, "FW does not support OPT MDL "
- "verification\n");
+ DP(NETIF_MSG_LINK,
+ "FW does not support OPT MDL verification\n");
return -EINVAL;
}
@@ -7736,8 +7738,9 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy,
for (timeout = 0; timeout < 60; timeout++) {
if (bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val)
== 0) {
- DP(NETIF_MSG_LINK, "SFP+ module initialization "
- "took %d ms\n", timeout * 5);
+ DP(NETIF_MSG_LINK,
+ "SFP+ module initialization took %d ms\n",
+ timeout * 5);
return 0;
}
msleep(5);
@@ -8506,8 +8509,8 @@ static int bnx2x_8726_config_init(struct bnx2x_phy *phy,
/* Set TX PreEmphasis if needed */
if ((params->feature_config_flags &
FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
- DP(NETIF_MSG_LINK, "Setting TX_CTRL1 0x%x,"
- "TX_CTRL2 0x%x\n",
+ DP(NETIF_MSG_LINK,
+ "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x\n",
phy->tx_preemphasis[0],
phy->tx_preemphasis[1]);
bnx2x_cl45_write(bp, phy,
@@ -8788,8 +8791,8 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy,
if (mod_abs & (1<<8)) {
/* Module is absent */
- DP(NETIF_MSG_LINK, "MOD_ABS indication "
- "show module is absent\n");
+ DP(NETIF_MSG_LINK,
+ "MOD_ABS indication show module is absent\n");
phy->media_type = ETH_PHY_NOT_PRESENT;
/*
* 1. Set mod_abs to detect next module
@@ -8816,8 +8819,8 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy,
} else {
/* Module is present */
- DP(NETIF_MSG_LINK, "MOD_ABS indication "
- "show module is present\n");
+ DP(NETIF_MSG_LINK,
+ "MOD_ABS indication show module is present\n");
/*
* First disable transmitter, and if the module is ok, the
* module_detection will enable it
@@ -8908,8 +8911,9 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy,
if ((val1 & (1<<8)) == 0) {
if (!CHIP_IS_E1x(bp))
oc_port = BP_PATH(bp) + (params->port << 1);
- DP(NETIF_MSG_LINK, "8727 Power fault has been detected"
- " on port %d\n", oc_port);
+ DP(NETIF_MSG_LINK,
+ "8727 Power fault has been detected on port %d\n",
+ oc_port);
netdev_err(bp->dev, "Error: Power fault on Port %d has"
" been detected and the power to "
"that SFP+ module has been removed"
@@ -9690,8 +9694,8 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy,
MDIO_AN_REG_8481_EXPANSION_REG_RD_RW,
&legacy_status);
- DP(NETIF_MSG_LINK, "Legacy speed status"
- " = 0x%x\n", legacy_status);
+ DP(NETIF_MSG_LINK, "Legacy speed status = 0x%x\n",
+ legacy_status);
link_up = ((legacy_status & (1<<11)) == (1<<11));
if (link_up) {
legacy_speed = (legacy_status & (3<<9));
@@ -9709,9 +9713,10 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy,
else
vars->duplex = DUPLEX_HALF;
- DP(NETIF_MSG_LINK, "Link is up in %dMbps,"
- " is_duplex_full= %d\n", vars->line_speed,
- (vars->duplex == DUPLEX_FULL));
+ DP(NETIF_MSG_LINK,
+ "Link is up in %dMbps, is_duplex_full= %d\n",
+ vars->line_speed,
+ (vars->duplex == DUPLEX_FULL));
/* Check legacy speed AN resolution */
bnx2x_cl45_read(bp, phy,
MDIO_AN_DEVAD,
@@ -10286,9 +10291,10 @@ static u8 bnx2x_54618se_read_status(struct bnx2x_phy *phy,
} else /* Should not happen */
vars->line_speed = 0;
- DP(NETIF_MSG_LINK, "Link is up in %dMbps,"
- " is_duplex_full= %d\n", vars->line_speed,
- (vars->duplex == DUPLEX_FULL));
+ DP(NETIF_MSG_LINK,
+ "Link is up in %dMbps, is_duplex_full= %d\n",
+ vars->line_speed,
+ (vars->duplex == DUPLEX_FULL));
/* Check legacy speed AN resolution */
bnx2x_cl22_read(bp, phy,
@@ -11336,8 +11342,9 @@ static void bnx2x_phy_def_cfg(struct link_params *params,
dev_info.
port_hw_config[params->port].speed_capability_mask));
}
- DP(NETIF_MSG_LINK, "Default config phy idx %x cfg 0x%x speed_cap_mask"
- " 0x%x\n", phy_index, link_config, phy->speed_cap_mask);
+ DP(NETIF_MSG_LINK,
+ "Default config phy idx %x cfg 0x%x speed_cap_mask 0x%x\n",
+ phy_index, link_config, phy->speed_cap_mask);
phy->req_duplex = DUPLEX_FULL;
switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 173b258b855f..e899e87f722d 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -4388,7 +4388,7 @@ static inline void bnx2x_handle_rx_mode_eqe(struct bnx2x *bp)
static inline struct bnx2x_queue_sp_obj *bnx2x_cid_to_q_obj(
struct bnx2x *bp, u32 cid)
{
- DP(BNX2X_MSG_SP, "retrieving fp from cid %d", cid);
+ DP(BNX2X_MSG_SP, "retrieving fp from cid %d\n", cid);
#ifdef BCM_CNIC
if (cid == BNX2X_FCOE_ETH_CID)
return &bnx2x_fcoe(bp, q_obj);
@@ -7176,7 +7176,7 @@ static inline void bnx2x_pf_q_prep_init(struct bnx2x *bp,
/* set maximum number of COSs supported by this queue */
init_params->max_cos = fp->max_cos;
- DP(BNX2X_MSG_SP, "fp: %d setting queue params max cos to: %d",
+ DP(BNX2X_MSG_SP, "fp: %d setting queue params max cos to: %d\n",
fp->index, init_params->max_cos);
/* set the context pointers queue object */
@@ -7209,7 +7209,7 @@ int bnx2x_setup_tx_only(struct bnx2x *bp, struct bnx2x_fastpath *fp,
DP(BNX2X_MSG_SP, "preparing to send tx-only ramrod for connection:"
"cos %d, primary cid %d, cid %d, "
- "client id %d, sp-client id %d, flags %lx",
+ "client id %d, sp-client id %d, flags %lx\n",
tx_index, q_params->q_obj->cids[FIRST_TX_COS_INDEX],
q_params->q_obj->cids[tx_index], q_params->q_obj->cl_id,
tx_only_params->gen_params.spcl_id, tx_only_params->flags);
@@ -7241,7 +7241,7 @@ int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp,
int rc;
u8 tx_index;
- DP(BNX2X_MSG_SP, "setting up queue %d", fp->index);
+ DP(BNX2X_MSG_SP, "setting up queue %d\n", fp->index);
/* reset IGU state skip FCoE L2 queue */
if (!IS_FCOE_FP(fp))
@@ -7265,7 +7265,7 @@ int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp,
return rc;
}
- DP(BNX2X_MSG_SP, "init complete");
+ DP(BNX2X_MSG_SP, "init complete\n");
/* Now move the Queue to the SETUP state... */
@@ -7319,7 +7319,7 @@ static int bnx2x_stop_queue(struct bnx2x *bp, int index)
struct bnx2x_queue_state_params q_params = {0};
int rc, tx_index;
- DP(BNX2X_MSG_SP, "stopping queue %d cid %d", index, fp->cid);
+ DP(BNX2X_MSG_SP, "stopping queue %d cid %d\n", index, fp->cid);
q_params.q_obj = &fp->q_obj;
/* We want to wait for completion in this context */
@@ -7334,7 +7334,7 @@ static int bnx2x_stop_queue(struct bnx2x *bp, int index)
/* ascertain this is a normal queue*/
txdata = &fp->txdata[tx_index];
- DP(BNX2X_MSG_SP, "stopping tx-only queue %d",
+ DP(BNX2X_MSG_SP, "stopping tx-only queue %d\n",
txdata->txq_index);
/* send halt terminate on tx-only connection */
@@ -10704,7 +10704,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
return rc;
}
- DP(NETIF_MSG_DRV, "max_non_def_sbs %d", max_non_def_sbs);
+ DP(NETIF_MSG_DRV, "max_non_def_sbs %d\n", max_non_def_sbs);
rc = bnx2x_init_bp(bp);
if (rc)
@@ -10759,15 +10759,14 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed);
- netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx,"
- " IRQ %d, ", board_info[ent->driver_data].name,
- (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
- pcie_width,
- ((!CHIP_IS_E2(bp) && pcie_speed == 2) ||
- (CHIP_IS_E2(bp) && pcie_speed == 1)) ?
- "5GHz (Gen2)" : "2.5GHz",
- dev->base_addr, bp->pdev->irq);
- pr_cont("node addr %pM\n", dev->dev_addr);
+ netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n",
+ board_info[ent->driver_data].name,
+ (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
+ pcie_width,
+ ((!CHIP_IS_E2(bp) && pcie_speed == 2) ||
+ (CHIP_IS_E2(bp) && pcie_speed == 1)) ?
+ "5GHz (Gen2)" : "2.5GHz",
+ dev->base_addr, bp->pdev->irq, dev->dev_addr);
return 0;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index b4d9c16ff152..1f88c1913bb6 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -3045,8 +3045,8 @@ static int bnx2x_mcast_setup_e1h(struct bnx2x *bp,
break;
case BNX2X_MCAST_CMD_DEL:
- DP(BNX2X_MSG_SP, "Invalidating multicast "
- "MACs configuration\n");
+ DP(BNX2X_MSG_SP,
+ "Invalidating multicast MACs configuration\n");
/* clear the registry */
memset(o->registry.aprox_match.vec, 0,
@@ -4239,7 +4239,7 @@ static int bnx2x_queue_comp_cmd(struct bnx2x *bp,
o->cids[BNX2X_PRIMARY_CID_INDEX], o->next_state);
if (o->next_tx_only) /* print num tx-only if any exist */
- DP(BNX2X_MSG_SP, "primary cid %d: num tx-only cons %d",
+ DP(BNX2X_MSG_SP, "primary cid %d: num tx-only cons %d\n",
o->cids[BNX2X_PRIMARY_CID_INDEX], o->next_tx_only);
o->state = o->next_state;
@@ -4301,7 +4301,7 @@ static void bnx2x_q_fill_init_general_data(struct bnx2x *bp,
test_bit(BNX2X_Q_FLG_FCOE, flags) ?
LLFC_TRAFFIC_TYPE_FCOE : LLFC_TRAFFIC_TYPE_NW;
- DP(BNX2X_MSG_SP, "flags: active %d, cos %d, stats en %d",
+ DP(BNX2X_MSG_SP, "flags: active %d, cos %d, stats en %d\n",
gen_data->activate_flg, gen_data->cos, gen_data->statistics_en_flg);
}
@@ -4454,7 +4454,7 @@ static void bnx2x_q_fill_setup_tx_only(struct bnx2x *bp,
&data->tx,
&cmd_params->params.tx_only.flags);
- DP(BNX2X_MSG_SP, "cid %d, tx bd page lo %x hi %x",cmd_params->q_obj->cids[0],
+ DP(BNX2X_MSG_SP, "cid %d, tx bd page lo %x hi %x\n",cmd_params->q_obj->cids[0],
data->tx.tx_bd_page_base.lo, data->tx.tx_bd_page_base.hi);
}
@@ -4501,9 +4501,9 @@ static inline int bnx2x_q_init(struct bnx2x *bp,
/* Set CDU context validation values */
for (cos = 0; cos < o->max_cos; cos++) {
- DP(BNX2X_MSG_SP, "setting context validation. cid %d, cos %d",
+ DP(BNX2X_MSG_SP, "setting context validation. cid %d, cos %d\n",
o->cids[cos], cos);
- DP(BNX2X_MSG_SP, "context pointer %p", init->cxts[cos]);
+ DP(BNX2X_MSG_SP, "context pointer %p\n", init->cxts[cos]);
bnx2x_set_ctx_validation(bp, init->cxts[cos], o->cids[cos]);
}
@@ -4592,7 +4592,7 @@ static inline int bnx2x_q_send_setup_tx_only(struct bnx2x *bp,
return -EINVAL;
}
- DP(BNX2X_MSG_SP, "parameters received: cos: %d sp-id: %d",
+ DP(BNX2X_MSG_SP, "parameters received: cos: %d sp-id: %d\n",
tx_only_params->gen_params.cos,
tx_only_params->gen_params.spcl_id);
@@ -4603,7 +4603,7 @@ static inline int bnx2x_q_send_setup_tx_only(struct bnx2x *bp,
bnx2x_q_fill_setup_tx_only(bp, params, rdata);
DP(BNX2X_MSG_SP, "sending tx-only ramrod: cid %d, client-id %d,"
- "sp-client id %d, cos %d",
+ "sp-client id %d, cos %d\n",
o->cids[cid_index],
rdata->general.client_id,
rdata->general.sp_client_id, rdata->general.cos);
@@ -5160,8 +5160,9 @@ static inline int bnx2x_func_state_change_comp(struct bnx2x *bp,
return -EINVAL;
}
- DP(BNX2X_MSG_SP, "Completing command %d for func %d, setting state to "
- "%d\n", cmd, BP_FUNC(bp), o->next_state);
+ DP(BNX2X_MSG_SP,
+ "Completing command %d for func %d, setting state to %d\n",
+ cmd, BP_FUNC(bp), o->next_state);
o->state = o->next_state;
o->next_state = BNX2X_F_STATE_MAX;
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.