diff options
25 files changed, 2650 insertions, 810 deletions
diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt index 4cf024929a3f..4698e0edc205 100644 --- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt @@ -5,17 +5,9 @@ Required properties: - compatible: Should be set to one of the following: marvell,armada370-thermal marvell,armada375-thermal - marvell,armada375-z1-thermal marvell,armada380-thermal marvell,armadaxp-thermal - Note: As the name suggests, "marvell,armada375-z1-thermal" - applies for the SoC Z1 stepping only. On such stepping - some quirks need to be done and the register offset differs - from the one in the A0 stepping. - The operating system may auto-detect the SoC stepping and - update the compatible and register offsets at runtime. - - reg: Device's register space. Two entries are expected, see the examples below. The first one is required for the sensor register; diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt new file mode 100644 index 000000000000..ef802de4957a --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt @@ -0,0 +1,68 @@ +* Temperature Sensor ADC (TSADC) on rockchip SoCs + +Required properties: +- compatible : "rockchip,rk3288-tsadc" +- reg : physical base address of the controller and length of memory mapped + region. +- interrupts : The interrupt number to the cpu. The interrupt specifier format + depends on the interrupt controller. +- clocks : Must contain an entry for each entry in clock-names. +- clock-names : Shall be "tsadc" for the converter-clock, and "apb_pclk" for + the peripheral clock. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the name "tsadc-apb". +- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. +- rockchip,hw-tshut-temp : The hardware-controlled shutdown temperature value. +- rockchip,hw-tshut-mode : The hardware-controlled shutdown mode 0:CRU 1:GPIO. +- rockchip,hw-tshut-polarity : The hardware-controlled active polarity 0:LOW + 1:HIGH. + +Exiample: +tsadc: tsadc@ff280000 { + compatible = "rockchip,rk3288-tsadc"; + reg = <0xff280000 0x100>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + resets = <&cru SRST_TSADC>; + reset-names = "tsadc-apb"; + pinctrl-names = "default"; + pinctrl-0 = <&otp_out>; + #thermal-sensor-cells = <1>; + rockchip,hw-tshut-temp = <95000>; + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; +}; + +Example: referring to thermal sensors: +thermal-zones { + cpu_thermal: cpu_thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&tsadc 1>; + + trips { + cpu_alert0: cpu_alert { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt new file mode 100644 index 000000000000..ecf3ed76cd46 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt @@ -0,0 +1,53 @@ +Tegra124 SOCTHERM thermal management system + +The SOCTHERM IP block contains thermal sensors, support for polled +or interrupt-based thermal monitoring, CPU and GPU throttling based +on temperature trip points, and handling external overcurrent +notifications. It is also used to manage emergency shutdown in an +overheating situation. + +Required properties : +- compatible : "nvidia,tegra124-soctherm". +- reg : Should contain 1 entry: + - SOCTHERM register set +- interrupts : Defines the interrupt used by SOCTHERM +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names : Must include the following entries: + - tsensor + - soctherm +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - soctherm +- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description + of this property. See <dt-bindings/thermal/tegra124-soctherm.h> for a + list of valid values when referring to thermal sensors. + + +Example : + + soctherm@0,700e2000 { + compatible = "nvidia,tegra124-soctherm"; + reg = <0x0 0x700e2000 0x0 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, + <&tegra_car TEGRA124_CLK_SOC_THERM>; + clock-names = "tsensor", "soctherm"; + resets = <&tegra_car 78>; + reset-names = "soctherm"; + + #thermal-sensor-cells = <1>; + }; + +Example: referring to thermal sensors : + + thermal-zones { + cpu { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>; + }; + }; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 51b373ff1065..4eb540be368f 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1942,4 +1942,48 @@ <&tegra_car TEGRA124_CLK_EXTERN1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + thermal-zones { + cpu { + trips { + trip@0 { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + /* There are currently no cooling maps because there are no cooling devices */ + }; + }; + + mem { + trips { + trip@0 { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + /* There are currently no cooling maps because there are no cooling devices */ + }; + }; + + gpu { + trips { + trip@0 { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + /* There are currently no cooling maps because there are no cooling devices */ + }; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index df2b06b29985..b92ac360b5b0 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/tegra124-soctherm.h> #include "skeleton.dtsi" @@ -640,6 +641,18 @@ status = "disabled"; }; + soctherm: thermal-sensor@0,700e2000 { + compatible = "nvidia,tegra124-soctherm"; + reg = <0x0 0x700e2000 0x0 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, + <&tegra_car TEGRA124_CLK_SOC_THERM>; + clock-names = "tsensor", "soctherm"; + resets = <&tegra_car 78>; + reset-names = "soctherm"; + #thermal-sensor-cells = <1>; + }; + ahub@0,70300000 { compatible = "nvidia,tegra124-ahub"; reg = <0x0 0x70300000 0x0 0x200>, @@ -881,6 +894,40 @@ }; }; + thermal-zones { + cpu { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>; + }; + + mem { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>; + }; + + gpu { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>; + }; + + pllx { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index d16dbb33a531..e7c8bf9093ea 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -176,6 +176,10 @@ static struct attribute *lm75_attrs[] = { }; ATTRIBUTE_GROUPS(lm75); +static const struct thermal_zone_of_device_ops lm75_of_thermal_ops = { + .get_temp = lm75_read_temp, +}; + /*-----------------------------------------------------------------------*/ /* device probe and removal */ @@ -291,10 +295,9 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) if (IS_ERR(data->hwmon_dev)) return PTR_ERR(data->hwmon_dev); - data->tz = thermal_zone_of_sensor_register(data->hwmon_dev, - 0, + data->tz = thermal_zone_of_sensor_register(data->hwmon_dev, 0, data->hwmon_dev, - lm75_read_temp, NULL); + &lm75_of_thermal_ops); if (IS_ERR(data->tz)) data->tz = NULL; diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c index 4ff89b2482e4..bca8521c8a9b 100644 --- a/drivers/hwmon/ntc_thermistor.c +++ b/drivers/hwmon/ntc_thermistor.c @@ -486,6 +486,10 @@ static const struct attribute_group ntc_attr_group = { .attrs = ntc_attributes, }; +static const struct thermal_zone_of_device_ops ntc_of_thermal_ops = { + .get_temp = ntc_read_temp, +}; + static int ntc_thermistor_probe(struct platform_device *pdev) { const struct of_device_id *of_id = @@ -579,7 +583,7 @@ static int ntc_thermistor_probe(struct platform_device *pdev) pdev_id->name); data->tz = thermal_zone_of_sensor_register(data->dev, 0, data->dev, - ntc_read_temp, NULL); + &ntc_of_thermal_ops); if (IS_ERR(data->tz)) { dev_dbg(&pdev->dev, "Failed to register to thermal fw.\n"); data->tz = NULL; diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c index 51719956cc03..ba9f478f64ee 100644 --- a/drivers/hwmon/tmp102.c +++ b/drivers/hwmon/tmp102.c @@ -158,6 +158,10 @@ ATTRIBUTE_GROUPS(tmp102); #define TMP102_CONFIG (TMP102_CONF_TM | TMP102_CONF_EM | TMP102_CONF_CR1) #define TMP102_CONFIG_RD_ONLY (TMP102_CONF_R0 | TMP102_CONF_R1 | TMP102_CONF_AL) +static const struct thermal_zone_of_device_ops tmp102_of_thermal_ops = { + .get_temp = tmp102_read_temp, +}; + static int tmp102_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -215,7 +219,7 @@ static int tmp102_probe(struct i2c_client *client, } tmp102->hwmon_dev = hwmon_dev; tmp102->tz = thermal_zone_of_sensor_register(hwmon_dev, 0, hwmon_dev, - tmp102_read_temp, NULL); + &tmp102_of_thermal_ops); if (IS_ERR(tmp102->tz)) tmp102->tz = NULL; diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index f554d25b4399..af40db0df58e 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -112,6 +112,18 @@ config CPU_THERMAL If you want this support, you should say Y here. +config CLOCK_THERMAL + bool "Generic clock cooling support" + depends on COMMON_CLK + depends on PM_OPP + help + This entry implements the generic clock cooling mechanism through + frequency clipping. Typically used to cool off co-processors. The + device that is configured to use this cooling mechanism will be + controlled to reduce clock frequency whenever temperature is high. + + If you want this support, you should say Y here. + config THERMAL_EMULATION bool "Thermal emulation mode support" help @@ -143,6 +155,16 @@ config SPEAR_THERMAL Enable this to plug the SPEAr thermal sensor driver into the Linux thermal framework. +config ROCKCHIP_THERMAL + tristate "Rockchip thermal driver" + depends on ARCH_ROCKCHIP + depends on RESET_CONTROLLER + help + Rockchip thermal driver provides support for Temperature sensor + ADC (TS-ADC) found on Rockchip SoCs. It supports one critical + trip point. Cpufreq is used as the cooling device and will throttle + CPUs when the Temperature crosses the passive trip point. + config RCAR_THERMAL tristate "Renesas R-Car thermal driver" depends on ARCH_SHMOBILE || COMPILE_TEST @@ -185,6 +207,16 @@ config ARMADA_THERMAL Enable this option if you want to have support for thermal management controller present in Armada 370 and Armada XP SoC. +config TEGRA_SOCTHERM + tristate "Tegra SOCTHERM thermal management" + depends on ARCH_TEGRA + help + Enable this option for integrated thermal management support on NVIDIA + Tegra124 systems-on-chip. The driver supports four thermal zones + (CPU, GPU, MEM, PLLX). Cooling devices can be bound to the thermal + zones to manage temperatures. This option is also required for the + emergency thermal reset (thermtrip) feature to function. + config DB8500_CPUFREQ_COOLING tristate "DB8500 cpufreq cooling" depends on ARCH_U8500 diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 39c4fe87da2f..fa0dc486790f 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -18,8 +18,12 @@ thermal_sys-$(CONFIG_THERMAL_GOV_USER_SPACE) += user_space.o # cpufreq cooling thermal_sys-$(CONFIG_CPU_THERMAL) += cpu_cooling.o +# clock cooling +thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o + # platform thermal drivers obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o +obj-$(CONFIG_ROCKCHIP_THERMAL) += rockchip_thermal.o obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o obj-$(CONFIG_KIRKWOOD_THERMAL) += kirkwood_thermal.o obj-y += samsung/ @@ -34,3 +38,4 @@ obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ obj-$(CONFIG_ST_THERMAL) += st/ +obj-$(CONFIG_TEGRA_SOCTHERM) += tegra_soctherm.o diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c index 9d1420acb391..9c8e7834e4ae 100644 --- a/drivers/thermal/armada_thermal.c +++ b/drivers/thermal/armada_thermal.c @@ -35,10 +35,6 @@ #define PMU_TDC0_OTF_CAL_MASK (0x1 << 30) #define PMU_TDC0_START_CAL_MASK (0x1 << 25) -#define A375_Z1_CAL_RESET_LSB 0x8011e214 -#define A375_Z1_CAL_RESET_MSB 0x30a88019 -#define A375_Z1_WORKAROUND_BIT BIT(9) - #define A375_UNIT_CONTROL_SHIFT 27 #define A375_UNIT_CONTROL_MASK 0x7 #define A375_READOUT_INVERT BIT(15) @@ -124,24 +120,12 @@ static void armada375_init_sensor(struct platform_device *pdev, struct armada_thermal_priv *priv) { unsigned long reg; - bool quirk_needed = - !!of_device_is_compatible(pdev->dev.of_node, - "marvell,armada375-z1-thermal"); - - if (quirk_needed) { - /* Ensure these registers have the default (reset) values */ - writel(A375_Z1_CAL_RESET_LSB, priv->control); - writel(A375_Z1_CAL_RESET_MSB, priv->control + 0x4); - } reg = readl(priv->control + 4); reg &= ~(A375_UNIT_CONTROL_MASK << A375_UNIT_CONTROL_SHIFT); reg &= ~A375_READOUT_INVERT; reg &= ~A375_HW_RESETn; - if (quirk_needed) - reg |= A375_Z1_WORKAROUND_BIT; - writel(reg, priv->control + 4); mdelay(20); @@ -260,10 +244,6 @@ static const struct of_device_id armada_thermal_id_table[] = { .data = &armada375_data, }, { - .compatible = "marvell,armada375-z1-thermal", - .data = &armada375_data, - }, - { .compatible = "marvell,armada380-thermal", .data = &armada380_data, }, diff --git a/drivers/thermal/clock_cooling.c b/drivers/thermal/clock_cooling.c new file mode 100644 index 000000000000..1b4ff0f4c716 --- /dev/null +++ b/drivers/thermal/clock_cooling.c @@ -0,0 +1,485 @@ +/* + * drivers/thermal/clock_cooling.c + * + * Copyright (C) 2014 Eduardo Valentin <edubezval@gmail.com> + * + * Copyright (C) 2013 Texas Instruments Inc. + * Contact: Eduardo Valentin <eduardo.valentin@ti.com> + * + * Highly based on cpu_cooling.c. + * Copyright (C) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com) + * Copyright (C) 2012 Amit Daniel <amit.kachhap@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ +#include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/idr.h> +#include <linux/mutex.h> +#include <linux/pm_opp.h> +#include <linux/slab.h> +#include <linux/thermal.h> +#include <linux/clock_cooling.h> + +/** + * struct clock_cooling_device - data for cooling device with clock + * @id: unique integer value corresponding to each clock_cooling_device + * registered. + * @dev: struct device pointer to the device being used to cool off using + * clock frequencies. + * @cdev: thermal_cooling_device pointer to keep track of the + * registered cooling device. + * @clk_rate_change_nb: reference to notifier block used to receive clock + * rate changes. + * @freq_table: frequency table used to keep track of available frequencies. + * @clock_state: integer value representing the current state of clock + * cooling devices. + * @clock_val: integer value representing the absolute value of the clipped + * frequency. + * @clk: struct clk reference used to enforce clock limits. + * @lock: mutex lock to protect this struct. + * + * This structure is required for keeping information of each + * clock_cooling_device registered. In order to prevent corruption of this a + * mutex @lock is used. + */ +struct clock_cooling_device { + int id; + struct device *dev; + struct thermal_cooling_device *cdev; + struct notifier_block clk_rate_change_nb; + struct cpufreq_frequency_table *freq_table; + unsigned long clock_state; + unsigned long clock_val; + struct clk *clk; + struct mutex lock; /* lock to protect the content of this struct */ +}; +#define to_clock_cooling_device(x) \ + container_of(x, struct clock_cooling_device, clk_rate_change_nb) +static DEFINE_IDR(clock_idr); +static DEFINE_MUTEX(cooling_clock_lock); + +/** + * clock_cooling_get_idr - function to get an unique id. + * @id: int * value generated by this function. + * + * This function will populate @id with an unique + * id, using the idr API. + * + * Return: 0 on success, an error code on failure. + */ +static int clock_cooling_get_idr(int *id) +{ + int ret; + + mutex_lock(&cooling_clock_lock); + ret = idr_alloc(&clock_idr, NULL, 0, 0, GFP_KERNEL); + mutex_unlock(&cooling_clock_lock); + if (unlikely(ret < 0)) + return ret; + *id = ret; + + return 0; +} + +/** + * release_idr - function to free the unique id. + * @id: int value representing the unique id. + */ +static void release_idr(int id) +{ + mutex_lock(&cooling_clock_lock); + idr_remove(&clock_idr, id); + mutex_unlock(&cooling_clock_lock); +} + +/* Below code defines functions to be used for clock as cooling device */ + +enum clock_cooling_property { + GET_LEVEL, + GET_FREQ, + GET_MAXL, +}; + +/** + * clock_cooling_get_property - fetch a property of interest for a give cpu. + * @ccdev: clock cooling device reference + * @input: query parameter + * @output: query return + * @property: type of query (frequency, level, max level) + * + * This is the common function to + * 1. get maximum clock cooling states + * 2. translate frequency to cooling state + * 3. translate cooling state to frequency + * Note that the code may be not in good shape + * but it is written in this way in order to: + * a) reduce duplicate code as most of the code can be shared. + * b) make sure the logic is consistent when translating between + * cooling states and frequencies. + * + * Return: 0 on success, -EINVAL when invalid parameters are passed. + */ +static int clock_cooling_get_property(struct clock_cooling_device *ccdev, + unsigned long input, + unsigned long *output, + enum clock_cooling_property property) +{ + int i; + unsigned long max_level = 0, level = 0; + unsigned int freq = CPUFREQ_ENTRY_INVALID; + int descend = -1; + struct cpufreq_frequency_table *pos, *table = ccdev->freq_table; + + if (!output) + return -EINVAL; + + if (!table) + return -EINVAL; + + cpufreq_for_each_valid_entry(pos, table) { + /* ignore duplicate entry */ + if (freq == pos->frequency) + continue; + + /* get the frequency order */ + if (freq != CPUFREQ_ENTRY_INVALID && descend == -1) + descend = freq > pos->frequency; + + freq = pos->frequency; + max_level++; + } + + /* No valid cpu frequency entry */ + if (max_level == 0) + return -EINVAL; + + /* max_level is an index, not a counter */ + max_level--; + + /* get max level */ + if (property == GET_MAXL) { + *output = max_level; + return 0; + } + + if (property == GET_FREQ) + level = descend ? input : (max_level - input); + + i = 0; + cpufreq_for_each_valid_entry(pos, table) { + /* ignore duplicate entry */ + if (freq == pos->frequency) + continue; + + /* now we have a valid frequency entry */ + freq = pos->frequency; + + if (property == GET_LEVEL && (unsigned int)input == freq) { + /* get level by frequency */ + *output = descend ? i : (max_level - i); + return 0; + } + if (property == GET_FREQ && level == i) { + /* get frequency by level */ + *output = freq; + return 0; + } + i++; + } + + return -EINVAL; +} + +/** + * clock_cooling_get_level - return the cooling level of given clock cooling. + * @cdev: reference of a thermal cooling device of used as clock cooling device + * @freq: the frequency of interest + * + * This function will match the cooling level corresponding to the + * requested @freq and return it. + * + * Return: The matched cooling level on success or THERMAL_CSTATE_INVALID + * otherwise. + */ +unsigned long clock_cooling_get_level(struct thermal_cooling_device *cdev, + unsigned long freq) +{ + struct clock_cooling_device *ccdev = cdev->devdata; + unsigned long val; + + if (clock_cooling_get_property(ccdev, (unsigned long)freq, &val, + GET_LEVEL)) + return THERMAL_CSTATE_INVALID; + + return val; +} +EXPORT_SYMBOL_GPL(clock_cooling_get_level); + +/** + * clock_cooling_get_frequency - get the absolute value of frequency from level. + * @ccdev: clock cooling device reference + * @level: cooling level + * + * This function matches cooling level with frequency. Based on a cooling level + * of frequency, equals cooling state of cpu cooling device, it will return + * the corresponding frequency. + * e.g level=0 --> 1st MAX FREQ, level=1 ---> 2nd MAX FREQ, .... etc + * + * Return: 0 on error, the corresponding frequency otherwise. + */ +static unsigned long +clock_cooling_get_frequency(struct clock_cooling_device *ccdev, + unsigned long level) +{ + int ret = 0; + unsigned long freq; + + ret = clock_cooling_get_property(ccdev, level, &freq, GET_FREQ); + if (ret) + return 0; + + return freq; +} + +/** + * clock_cooling_apply - function to apply frequency clipping. + * @ccdev: clock_cooling_device pointer containing frequency clipping data. + * @cooling_state: value of the cooling state. + * + * Function used to make sure the clock layer is aware of current thermal + * limits. The limits are applied by updating the clock rate in case it is + * higher than the corresponding frequency based on the requested cooling_state. + * + * Return: 0 on success, an error code otherwise (-EINVAL in case wrong + * cooling state). + */ +static int clock_cooling_apply(struct clock_cooling_device *ccdev, + unsigned long cooling_state) +{ + unsigned long clip_freq, cur_freq; + int ret = 0; + + /* Here we write the clipping */ + /* Check if the old cooling action is same as new cooling action */ + if (ccdev->clock_state == cooling_state) + return 0; + + clip_freq = clock_cooling_get_frequency(ccdev, cooling_state); + if (!clip_freq) + return -EINVAL; + + cur_freq = clk_get_rate(ccdev->clk); + + mutex_lock(&ccdev->lock); + ccdev->clock_state = cooling_state; + ccdev->clock_val = clip_freq; + /* enforce clock level */ + if (cur_freq > clip_freq) + ret = clk_set_rate(ccdev->clk, clip_freq); + mutex_unlock(&ccdev->lock); + + return ret; +} + +/** + * clock_cooling_clock_notifier - notifier callback on clock rate changes. + * @nb: struct notifier_block * with callback info. + * @event: value showing clock event for which this function invoked. + * @data: callback-specific data + * + * Callback to hijack the notification on clock transition. + * Every time there is a clock change, we intercept all pre change events + * and block the transition in case the new rate infringes thermal limits. + * + * Return: NOTIFY_DONE (success) or NOTIFY_BAD (new_rate > thermal limit). + */ +static int clock_cooling_clock_notifier(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct clk_notifier_data *ndata = data; + struct clock_cooling_device *ccdev = to_clock_cooling_device(nb); + + switch (event) { + case PRE_RATE_CHANGE: + /* + * checks on current state + * TODO: current method is not best we can find as it + * allows possibly voltage transitions, in case DVFS + * layer is also hijacking clock pre notifications. + */ + if (ndata->new_rate > ccdev->clock_val) + return NOTIFY_BAD; + /* fall through */ + case POST_RATE_CHANGE: + case ABORT_RATE_CHANGE: + default: + return NOTIFY_DONE; + } +} + +/* clock cooling device thermal callback functions are defined below */ + +/** + * clock_cooling_get_max_state - callback function to get the max cooling state. + * @cdev: thermal cooling device pointer. + * @state: fill this variable with the max cooling state. + * + * Callback for the thermal cooling device to return the clock + * max cooling state. + * + * Return: 0 on success, an error code otherwise. + */ +static int clock_cooling_get_max_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + struct clock_cooling_device *ccdev = cdev->devdata; + unsigned long count = 0; + int ret; + + ret = clock_cooling_get_property(ccdev, 0, &count, GET_MAXL); + if (!ret) + *state = count; + + return ret; +} + +/** + * clock_cooling_get_cur_state - function to get the current cooling state. + * @cdev: thermal cooling device pointer. + * @state: fill this variable with the current cooling state. + * + * Callback for the thermal cooling device to return the clock + * current cooling state. + * + * Return: 0 (success) + */ +static int clock_cooling_get_cur_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + struct clock_cooling_device *ccdev = cdev->devdata; + + *state = ccdev->clock_state; + + return 0; +} + +/** + * clock_cooling_set_cur_state - function to set the current cooling state. + * @cdev: thermal cooling device pointer. + * @state: set this variable to the current cooling state. + * + * Callback for the thermal cooling device to change the clock cooling + * current cooling state. + * + * Return: 0 on success, an error code otherwise. + */ +static int clock_cooling_set_cur_state(struct thermal_cooling_device *cdev, + unsigned long state) +{ + struct clock_cooling_device *clock_device = cdev->devdata; + + return clock_cooling_apply(clock_device, state); +} + +/* Bind clock callbacks to thermal cooling device ops */ +static struct thermal_cooling_device_ops const clock_cooling_ops = { + .get_max_state = clock_cooling_get_max_state, + .get_cur_state = clock_cooling_get_cur_state, + .set_cur_state = clock_cooling_set_cur_state, +}; + +/** + * clock_cooling_register - function to create clock cooling device. + * @dev: struct device pointer to the device used as clock cooling device. + * @clock_name: string containing the clock used as cooling mechanism. + * + * This interface function registers the clock cooling device with the name + * "thermal-clock-%x". The cooling device is based on clock frequencies. + * The struct device is assumed to be capable of DVFS transitions. + * The OPP layer is used to fetch and fill the available frequencies for + * the referred device. The ordered frequency table is used to control + * the clock cooling device cooling states and to limit clock transitions + * based on the cooling state requested by the thermal framework. + * + * Return: a valid struct thermal_cooling_device pointer on success, + * on failure, it returns a corresponding ERR_PTR(). + */ +struct thermal_cooling_device * +clock_cooling_register(struct device *dev, const char *clock_name) +{ + struct thermal_cooling_device *cdev; + struct clock_cooling_device *ccdev = NULL; + char dev_name[THERMAL_NAME_LENGTH]; + int ret = 0; + + ccdev = devm_kzalloc(dev, sizeof(*ccdev), GFP_KERNEL); + if (!ccdev) + return ERR_PTR(-ENOMEM); + + ccdev->dev = dev; + ccdev->clk = devm_clk_get(dev, clock_name); + if (IS_ERR(ccdev->clk)) + return ERR_CAST(ccdev->clk); + + ret = clock_cooling_get_idr(&ccdev->id); + if (ret) + return ERR_PTR(-EINVAL); + + snprintf(dev_name, sizeof(dev_name), "thermal-clock-%d", ccdev->id); + + cdev = thermal_cooling_device_register(dev_name, ccdev, + &clock_cooling_ops); + if (IS_ERR(cdev)) { + release_idr(ccdev->id); + return ERR_PTR(-EINVAL); + } + ccdev->cdev = cdev; + ccdev->clk_rate_change_nb.notifier_call = clock_cooling_clock_notifier; + + /* Assuming someone has already filled the opp table for this device */ + ret = dev_pm_opp_init_cpufreq_table(dev, &ccdev->freq_table); + if (ret) { + release_idr(ccdev->id); + return ERR_PTR(ret); + } + ccdev->clock_state = 0; + ccdev->clock_val = clock_cooling_get_frequency(ccdev, 0); + + clk_notifier_register(ccdev->clk, &ccdev->clk_rate_change_nb); + + return cdev; +} +EXPORT_SYMBOL_GPL(clock_cooling_register); + +/** + * clock_cooling_unregister - function to remove clock cooling device. + * @cdev: thermal cooling device pointer. + * + * This interface function unregisters the "thermal-clock-%x" cooling device. + */ +void clock_cooling_unregister(struct thermal_cooling_device *cdev) +{ + struct clock_cooling_device *ccdev; + + if (!cdev) + return; + + ccdev = cdev->devdata; + + clk_notifier_unregister(ccdev->clk, &ccdev->clk_rate_change_nb); + dev_pm_opp_free_cpufreq_table(ccdev->dev, &ccdev->freq_table); + + thermal_cooling_device_unregister(ccdev->cdev); + release_idr(ccdev->id); +} +EXPORT_SYMBOL_GPL(clock_cooling_unregister); diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index 62143ba31001..e145b66df444 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -30,27 +30,13 @@ #include <linux/err.h> #include <linux/export.h> #include <linux/string.h> +#include <linux/thermal.h> #include "thermal_core.h" /*** Private data structures to represent thermal device tree data ***/ /** - * struct __thermal_trip - representation of a point in temperature domain - * @np: pointer to struct device_node that this trip point was created from - * @temperature: temperature value in miliCelsius - * @hysteresis: relative hysteresis in miliCelsius - * @type: trip point type - */ - -struct __thermal_trip { - struct device_node *np; - unsigned long int temperature; - unsigned long int hysteresis; - enum thermal_trip_type type; -}; - -/** * struct __thermal_bind_param - a match between trip and cooling device * @cooling_device: a pointer to identify the referred cooling device * @trip_id: the trip point index @@ -77,8 +63,7 @@ struct __thermal_bind_params { * @num_tbps: number of thermal bind params * @tbps: an array of thermal bind params (0..num_tbps - 1) * @sensor_data: sensor private data used while reading temperature and trend - * @get_temp: sensor callback to read temperature - * @get_trend: sensor callback to read temperature trend + * @ops: set of callbacks to handle the thermal zone based on DT */ struct __thermal_zone { @@ -88,7 +73,7 @@ struct __thermal_zone { /* trip data */ int ntrips; - struct __thermal_trip *trips; + struct thermal_trip *trips; /* cooling binding data */ int num_tbps; @@ -96,8 +81,7 @@ struct __thermal_zone { /* sensor interface */ void *sensor_data; - int (*get_temp)(void *, long *); - int (*get_trend)(void *, long *); + const struct thermal_zone_of_device_ops *ops; }; /*** DT thermal zone device callbacks ***/ @@ -107,10 +91,96 @@ static int of_thermal_get_temp(struct thermal_zone_device *tz, { struct __thermal_zone *data = tz->devdata; - if (!data->get_temp) + if (!data->ops->get_temp) return -EINVAL; - return data->get_temp(data->sensor_data, temp); + return data->ops->get_temp(data->sensor_data, temp); +} + +/** + * of_thermal_get_ntrips - function to export number of available trip + * points. + * @tz: pointer to a thermal zone + * + * This function is a globally visible wrapper to get number of trip points + * stored in the local struct __thermal_zone + * + * Return: number of available trip points, -ENODEV when data not available + */ +int of_thermal_get_ntrips(struct thermal_zone_device *tz) +{ + struct __thermal_zone *data = tz->devdata; + + if (!data || IS_ERR(data)) + return -ENODEV; + + return data->ntrips; +} +EXPORT_SYMBOL_GPL(of_thermal_get_ntrips); + +/** + * of_thermal_is_trip_valid - function to check if trip point is valid + * + * @tz: pointer to a thermal zone + * @trip: trip point to evaluate + * + * This function is responsible for checking if passed trip point is valid + * + * Return: true if trip point is valid, false otherwise + */ +bool of_thermal_is_trip_valid(struct thermal_zone_device *tz, int trip) +{ + struct __thermal_zone *data = tz->devdata; + + if (!data || trip >= data->ntrips || trip < 0) + return false; + + return true; +} +EXPORT_SYMBOL_GPL(of_thermal_is_trip_valid); + +/** + * of_thermal_get_trip_points - function to get access to a globally exported + * trip points + * + * @tz: pointer to a thermal zone + * + * This function provides a pointer to trip points table + * + * Return: pointer to trip points table, NULL otherwise + */ +const struct thermal_trip * const +of_thermal_get_trip_points(struct thermal_zone_device *tz) +{ + struct __thermal_zone *data = tz->devdata; + + if (!data) + return NULL; + + return data->trips; +} +EXPORT_SYMBOL_GPL(of_thermal_get_trip_points); + +/** + * of_thermal_set_emul_temp - function to set emulated temperature + * + * @tz: pointer to a thermal zone + * @temp: temperature to set + * + * This function gives the ability to set emulated value of temperature, + * which is handy for debugging + * + * Return: zero on success, error code otherwise + */ +static int of_thermal_set_emul_temp(struct thermal_zone_device *tz, + unsigned long temp) +{ + struct __thermal_zone *data = tz->devdata; + + if (!data->ops || !data->ops->set_emul_temp) + return -EINVAL; + + return data->ops->set_emul_temp(data->sensor_data, temp); } static int of_thermal_get_trend(struct thermal_zone_device *tz, int trip, @@ -120,10 +190,10 @@ static int of_thermal_get_trend(struct thermal_zone_device *tz, int trip, long dev_trend; int r; - if (!data->get_trend) + if (!data->ops->get_trend) return -EINVAL; - r = data->get_trend(data->sensor_data, &dev_trend); + r = data->ops->get_trend(data->sensor_data, &dev_trend); if (r) return r; @@ -324,8 +394,7 @@ static struct thermal_zone_device_ops of_thermal_ops = { static struct thermal_zone_device * thermal_zone_of_add_sensor(struct device_node *zone, struct device_node *sensor, void *data, - int (*get_temp)(void *, long *), - int (*get_trend)(void *, long *)) + const struct thermal_zone_of_device_ops *ops) { struct thermal_zone_device *tzd; struct __thermal_zone *tz; @@ -336,13 +405,16 @@ thermal_zone_of_add_sensor(struct device_node *zone, tz = tzd->devdata; + if (!ops) + return ERR_PTR(-EINVAL); + mutex_lock(&tzd->lock); - tz->get_temp = get_temp; - tz->get_trend = get_trend; + tz->ops = ops; tz->sensor_data = data; tzd->ops->get_temp = of_thermal_get_temp; tzd->ops->get_trend = of_thermal_get_trend; + tzd->ops->set_emul_temp = of_thermal_set_emul_temp; mutex_unlock(&tzd->lock); return tzd; @@ -356,8 +428,7 @@ thermal_zone_of_add_sensor(struct device_node *zone, * than one sensors * @data: a private pointer (owned by the caller) that will be passed * back, when a temperature reading is needed. - * @get_temp: a pointer to a function that reads the sensor temperature. - * @get_trend: a pointer to a function that reads the sensor temperature trend. + * @ops: struct thermal_zone_of_device_ops *. Must contain at least .get_temp. * * This function will search the list of thermal zones described in device * tree and look for the zone that refer to the sensor device pointed by @@ -382,9 +453,8 @@ thermal_zone_of_add_sensor(struct device_node *zone, * check the return value with help of IS_ERR() helper. */ struct thermal_zone_device * -thermal_zone_of_sensor_register(struct device *dev, int sensor_id, - void *data, int (*get_temp)(void *, long *), - int (*get_trend)(void *, long *)) +thermal_zone_of_sensor_register(struct device *dev, int sensor_id, void *data, + const struct thermal_zone_of_device_ops *ops) { struct device_node *np, *child, *sensor_np; struct thermal_zone_device *tzd = ERR_PTR(-ENODEV); @@ -426,9 +496,7 @@ thermal_zone_of_sensor_register(struct device *dev, int sensor_id, if (sensor_specs.np == sensor_np && id == sensor_id) { tzd = thermal_zone_of_add_sensor(child, sensor_np, - data, - get_temp, - get_trend); + data, ops); of_node_put(sensor_specs.np); of_node_put(child); goto exit; @@ -475,9 +543,9 @@ void thermal_zone_of_sensor_unregister(struct device *dev, mutex_lock(&tzd->lock); tzd->ops->get_temp = NULL; tzd->ops->get_trend = NULL; + tzd->ops->set_emul_temp = NULL; - tz->get_temp = NULL; - tz->get_trend = NULL; + tz->ops = NULL; tz->sensor_data = NULL; mutex_unlock(&tzd->lock); } @@ -501,7 +569,7 @@ EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_unregister); */ static int thermal_of_populate_bind_params(struct device_node *np, struct __thermal_bind_params *__tbp, - struct __thermal_trip *trips, + struct thermal_trip *trips, int ntrips) { struct of_phandle_args cooling_spec; @@ -604,7 +672,7 @@ static int thermal_of_get_trip_type(struct device_node *np, * Return: 0 on success, proper error code otherwise */ static int thermal_of_populate_trip(struct device_node *np, - struct __thermal_trip *trip) + struct thermal_trip *trip) { int prop; int ret; diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c new file mode 100644 index 000000000000..1bcddfc60e91 --- /dev/null +++ b/drivers/thermal/rockchip_thermal.c @@ -0,0 +1,693 @@ +/* + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/reset.h> +#include <linux/thermal.h> + +/** + * If the temperature over a period of time High, + * the resulting TSHUT gave CRU module,let it reset the entire chip, + * or via GPIO give PMIC. + */ +enum tshut_mode { + TSHUT_MODE_CRU = 0, + TSHUT_MODE_GPIO, +}; + +/** + * the system Temperature Sensors tshut(tshut) polarity + * the bit 8 is tshut polarity. + * 0: low active, 1: high active + */ +enum tshut_polarity { + TSHUT_LOW_ACTIVE = 0, + TSHUT_HIGH_ACTIVE, +}; + +/** + * The system has three Temperature Sensors. channel 0 is reserved, + * channel 1 is for CPU, and channel 2 is for GPU. + */ +enum sensor_id { + SENSOR_CPU = 1, + SENSOR_GPU, +}; + +struct rockchip_tsadc_chip { + /* The hardware-controlled tshut property */ + long tshut_temp; + enum tshut_mode tshut_mode; + enum tshut_polarity tshut_polarity; + + /* Chip-wide methods */ + void (*initialize)(void __iomem *reg, enum tshut_polarity p); + void (*irq_ack)(void __iomem *reg); + void (*control)(void __iomem *reg, bool on); + + /* Per-sensor methods */ + int (*get_temp)(int chn, void __iomem *reg, long *temp); + void (*set_tshut_temp)(int chn, void __iomem *reg, long temp); + void (*set_tshut_mode)(int chn, void __iomem *reg, enum tshut_mode m); +}; + +struct rockchip_thermal_sensor { + struct rockchip_thermal_data *thermal; + struct thermal_zone_device *tzd; + enum sensor_id id; +}; + +#define NUM_SENSORS 2 /* Ignore unused sensor 0 */ + +struct rockchip_thermal_data { + const struct rockchip_tsadc_chip *chip; + struct platform_device *pdev; + struct reset_control *reset; + + struct rockchip_thermal_sensor sensors[NUM_SENSORS]; + + struct clk *clk; + struct clk *pclk; + + void __iomem *regs; + + long tshut_temp; + enum tshut_mode tshut_mode; + enum tshut_polarity tshut_polarity; +}; + +/* TSADC V2 Sensor info define: */ +#define TSADCV2_AUTO_CON 0x04 +#define TSADCV2_INT_EN 0x08 +#define TSADCV2_INT_PD 0x0c +#define TSADCV2_DATA(chn) (0x20 + (chn) * 0x04) +#define TSADCV2_COMP_SHUT(chn) (0x40 + (chn) * 0x04) +#define TSADCV2_HIGHT_INT_DEBOUNCE 0x60 +#define TSADCV2_HIGHT_TSHUT_DEBOUNCE 0x64 +#define TSADCV2_AUTO_PERIOD 0x68 +#define TSADCV2_AUTO_PERIOD_HT 0x6c + +#define TSADCV2_AUTO_EN BIT(0) +#define TSADCV2_AUTO_DISABLE ~BIT(0) +#define TSADCV2_AUTO_SRC_EN(chn) BIT(4 + (chn)) +#define TSADCV2_AUTO_TSHUT_POLARITY_HIGH BIT(8) +#define TSADCV2_AUTO_TSHUT_POLARITY_LOW ~BIT(8) + +#define TSADCV2_INT_SRC_EN(chn) BIT(chn) +#define TSADCV2_SHUT_2GPIO_SRC_EN(chn) BIT(4 + (chn)) +#define TSADCV2_SHUT_2CRU_SRC_EN(chn) BIT(8 + (chn)) + +#define TSADCV2_INT_PD_CLEAR ~BIT(8) + +#define TSADCV2_DATA_MASK 0xfff +#define TSADCV2_HIGHT_INT_DEBOUNCE_COUNT 4 +#define TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT 4 +#define TSADCV2_AUTO_PERIOD_TIME 250 /* msec */ +#define TSADCV2_AUTO_PERIOD_HT_TIME 50 /* msec */ + +struct tsadc_table { + unsigned long code; + long temp; +}; + +static const struct tsadc_table v2_code_table[] = { + {TSADCV2_DATA_MASK, -40000}, + {3800, -40000}, + {3792, -35000}, + {3783, -30000}, + {3774, -25000}, + {3765, -20000}, + {3756, -15000}, + {3747, -10000}, + {3737, -5000}, + {3728, 0}, + {3718, 5000}, + {3708, 10000}, + {3698, 15000}, + {3688, 20000}, + {3678, 25000}, + {3667, 30000}, + {3656, 35000}, + {3645, 40000}, + {3634, 45000}, + {3623, 50000}, + {3611, 55000}, + {3600, 60000}, + {3588, 65000}, + {3575, 70000}, + {3563, 75000}, + {3550, 80000}, + {3537, 85000}, + {3524, 90000}, + {3510, 95000}, + {3496, 100000}, + {3482, 105000}, + {3467, 110000}, + {3452, 115000}, + {3437, 120000}, + {3421, 125000}, + {0, 125000}, +}; + +static u32 rk_tsadcv2_temp_to_code(long temp) +{ + int high, low, mid; + + low = 0; + high = ARRAY_SIZE(v2_code_table) - 1; + mid = (high + low) / 2; + + if (temp < v2_code_table[low].temp || temp > v2_code_table[high].temp) + return 0; + + while (low <= high) { + if (temp == v2_code_table[mid].temp) + return v2_code_table[mid].code; + else if (temp < v2_code_table[mid].temp) + high = mid - 1; + else + low = mid + 1; + mid = (low + high) / 2; + } + + return 0; +} + +static long rk_tsadcv2_code_to_temp(u32 code) +{ + int high, low, mid; + + low = 0; + high = ARRAY_SIZE(v2_code_table) - 1; + mid = (high + low) / 2; + + if (code > v2_code_table[low].code || code < v2_code_table[high].code) + return 125000; /* No code available, return max temperature */ + + while (low <= high) { + if (code >= v2_code_table[mid].code && code < + v2_code_table[mid - 1].code) + return v2_code_table[mid].temp; + else if (code < v2_code_table[mid].code) + low = mid + 1; + else + high = mid - 1; + mid = (low + high) / 2; + } + + return 125000; +} + +/** + * rk_tsadcv2_initialize - initialize TASDC Controller + * (1) Set TSADCV2_AUTO_PERIOD, configure the interleave between + * every two accessing of TSADC in normal operation. + * (2) Set TSADCV2_AUTO_PERIOD_HT, configure the interleave between + * every two accessing of TSADC after the temperature is higher + * than COM_SHUT or COM_INT. + * (3) Set TSADCV2_HIGH_INT_DEBOUNCE and TSADC_HIGHT_TSHUT_DEBOUNCE, + * if the temperature is higher than COMP_INT or COMP_SHUT for + * "debounce" times, TSADC controller will generate interrupt or TSHUT. + */ +static void rk_tsadcv2_initialize(void __iomem *regs, + enum tshut_polarity tshut_polarity) +{ + if (tshut_polarity == TSHUT_HIGH_ACTIVE) + writel_relaxed(0 | (TSADCV2_AUTO_TSHUT_POLARITY_HIGH), + regs + TSADCV2_AUTO_CON); + else + writel_relaxed(0 | (TSADCV2_AUTO_TSHUT_POLARITY_LOW), + regs + TSADCV2_AUTO_CON); + + writel_relaxed(TSADCV2_AUTO_PERIOD_TIME, regs + TSADCV2_AUTO_PERIOD); + writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT, + regs + TSADCV2_HIGHT_INT_DEBOUNCE); + writel_relaxed(TSADCV2_AUTO_PERIOD_HT_TIME, + regs + TSADCV2_AUTO_PERIOD_HT); + writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT, + regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE); +} + +static void rk_tsadcv2_irq_ack(void __iomem *regs) +{ + u32 val; + + val = readl_relaxed(regs + TSADCV2_INT_PD); + writel_relaxed(val & TSADCV2_INT_PD_CLEAR, regs + TSADCV2_INT_PD); +} + +static void rk_tsadcv2_control(void __iomem *regs, bool enable) +{ + u32 val; + + val = readl_relaxed(regs + TSADCV2_AUTO_CON); + if (enable) + val |= TSADCV2_AUTO_EN; + else + val &= ~TSADCV2_AUTO_EN; + + writel_relaxed(val, regs + TSADCV2_AUTO_CON); +} + +static int rk_tsadcv2_get_temp(int chn, void __iomem *regs, long *temp) +{ + u32 val; + + /* the A/D value of the channel last conversion need some time */ + val = readl_relaxed(regs + TSADCV2_DATA(chn)); + if (val == 0) + return -EAGAIN; + + *temp = rk_tsadcv2_code_to_temp(val); + + return 0; +} + +static void rk_tsadcv2_tshut_temp(int chn, void __iomem *regs, long temp) +{ + u32 tshut_value, val; + + tshut_value = rk_tsadcv2_temp_to_code(temp); + writel_relaxed(tshut_value, regs + TSADCV2_COMP_SHUT(chn)); + + /* TSHUT will be valid */ + val = readl_relaxed(regs + TSADCV2_AUTO_CON); + writel_relaxed(val | TSADCV2_AUTO_SRC_EN(chn), regs + TSADCV2_AUTO_CON); +} + +static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs, + enum tshut_mode mode) +{ + u32 val; + + val = readl_relaxed(regs + TSADCV2_INT_EN); + if (mode == TSHUT_MODE_GPIO) { + val &= ~TSADCV2_SHUT_2CRU_SRC_EN(chn); + val |= TSADCV2_SHUT_2GPIO_SRC_EN(chn); + } else { + val &= ~TSADCV2_SHUT_2GPIO_SRC_EN(chn); + val |= TSADCV2_SHUT_2CRU_SRC_EN(chn); + } + + writel_relaxed(val, regs + TSADCV2_INT_EN); +} + +static const struct rockchip_tsadc_chip rk3288_tsadc_data = { + .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */ + .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */ + .tshut_temp = 95000, + + .initialize = rk_tsadcv2_initialize, + .irq_ack = rk_tsadcv2_irq_ack, + .control = rk_tsadcv2_control, + .get_temp = rk_tsadcv2_get_temp, + .set_tshut_temp = rk_tsadcv2_tshut_temp, + .set_tshut_mode = rk_tsadcv2_tshut_mode, +}; + +static const struct of_device_id of_rockchip_thermal_match[] = { + { + .compatible = "rockchip,rk3288-tsadc", + .data = (void *)&rk3288_tsadc_data, + }, + { /* end */ }, +}; +MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match); + +static void +rockchip_thermal_toggle_sensor(struct rockchip_thermal_sensor *sensor, bool on) +{ + struct thermal_zone_device *tzd = sensor->tzd; + + tzd->ops->set_mode(tzd, + on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED); +} + +static irqreturn_t rockchip_thermal_alarm_irq_thread(int irq, void *dev) +{ + struct rockchip_thermal_data *thermal = dev; + int i; + + dev_dbg(&thermal->pdev->dev, "thermal alarm\n"); + + thermal->chip->irq_ack(thermal->regs); + + for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++) + thermal_zone_device_update(thermal->sensors[i].tzd); + + return IRQ_HANDLED; +} + +static int rockchip_thermal_get_temp(void *_sensor, long *out_temp) +{ + struct rockchip_thermal_sensor *sensor = _sensor; + struct rockchip_thermal_data *thermal = sensor->thermal; + const struct rockchip_tsadc_chip *tsadc = sensor->thermal->chip; + int retval; + + retval = tsadc->get_temp(sensor->id, thermal->regs, out_temp); + dev_dbg(&thermal->pdev->dev, "sensor %d - temp: %ld, retval: %d\n", + sensor->id, *out_temp, retval); + + return retval; +} + +static const struct thermal_zone_of_device_ops rockchip_of_thermal_ops = { + .get_temp = rockchip_thermal_get_temp, +}; + +static int rockchip_configure_from_dt(struct device *dev, + struct device_node *np, + struct rockchip_thermal_data *thermal) +{ + u32 shut_temp, tshut_mode, tshut_polarity; + + if (of_property_read_u32(np, "rockchip,hw-tshut-temp", &shut_temp)) { + dev_warn(dev, + "Missing tshut temp property, using default %ld\n", + thermal->chip->tshut_temp); + thermal->tshut_temp = thermal->chip->tshut_temp; + } else { + thermal->tshut_temp = shut_temp; + } + + if (thermal->tshut_temp > INT_MAX) { + dev_err(dev, "Invalid tshut temperature specified: %ld\n", + thermal->tshut_temp); + return -ERANGE; + } + + if (of_property_read_u32(np, "rockchip,hw-tshut-mode", &tshut_mode)) { + dev_warn(dev, + "Missing tshut mode property, using default (%s)\n", + thermal->chip->tshut_mode == TSHUT_MODE_GPIO ? + "gpio" : "cru"); + thermal->tshut_mode = thermal->chip->tshut_mode; + } else { + thermal->tshut_mode = tshut_mode; + } + + if (thermal->tshut_mode > 1) { + dev_err(dev, "Invalid tshut mode specified: %d\n", + thermal->tshut_mode); + return -EINVAL; + } + + if (of_property_read_u32(np, "rockchip,hw-tshut-polarity", + &tshut_polarity)) { + dev_warn(dev, + "Missing tshut-polarity property, using default (%s)\n", + thermal->chip->tshut_polarity == TSHUT_LOW_ACTIVE ? + "low" : "high"); + thermal->tshut_polarity = thermal->chip->tshut_polarity; + } else { + thermal->tshut_polarity = tshut_polarity; + } + + if (thermal->tshut_polarity > 1) { + dev_err(dev, "Invalid tshut-polarity specified: %d\n", + thermal->tshut_polarity); + return -EINVAL; + } + + return 0; +} + +static int +rockchip_thermal_register_sensor(struct platform_device *pdev, + struct rockchip_thermal_data *thermal, + struct rockchip_thermal_sensor *sensor, + enum sensor_id id) +{ + const struct rockchip_tsadc_chip *tsadc = thermal->chip; + int error; + + tsadc->set_tshut_mode(id, thermal->regs, thermal->tshut_mode); + tsadc->set_tshut_temp(id, thermal->regs, thermal->tshut_temp); + + sensor->thermal = thermal; + sensor->id = id; + sensor->tzd = thermal_zone_of_sensor_register(&pdev->dev, id, sensor, + &rockchip_of_thermal_ops); + if (IS_ERR(sensor->tzd)) { + error = PTR_ERR(sensor->tzd); + dev_err(&pdev->dev, "failed to register sensor %d: %d\n", + id, error); + return error; + } + + return 0; +} + +/* + * Reset TSADC Controller, reset all tsadc registers. + */ +static void rockchip_thermal_reset_controller(struct reset_control *reset) +{ + reset_control_assert(reset); + usleep_range(10, 20); + reset_control_deassert(reset); +} + +static int rockchip_thermal_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct rockchip_thermal_data *thermal; + const struct of_device_id *match; + struct resource *res; + int irq; + int i; + int error; + + match = of_match_node(of_rockchip_thermal_match, np); + if (!match) + return -ENXIO; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no irq resource?\n"); + return -EINVAL; + } + + thermal = devm_kzalloc(&pdev->dev, sizeof(struct rockchip_thermal_data), + GFP_KERNEL); + if (!thermal) + return -ENOMEM; + + thermal->pdev = pdev; + + thermal->chip = (const struct rockchip_tsadc_chip *)match->data; + if (!thermal->chip) + return -EINVAL; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + thermal->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(thermal->regs)) + return PTR_ERR(thermal->regs); + + thermal->reset = devm_reset_control_get(&pdev->dev, "tsadc-apb"); + if (IS_ERR(thermal->reset)) { + error = PTR_ERR(thermal->reset); + dev_err(&pdev->dev, "failed to get tsadc reset: %d\n", error); + return error; + } + + thermal->clk = devm_clk_get(&pdev->dev, "tsadc"); + if (IS_ERR(thermal->clk)) { + error = PTR_ERR(thermal->clk); + dev_err(&pdev->dev, "failed to get tsadc clock: %d\n", error); + return error; + } + + thermal->pclk = devm_clk_get(&pdev->dev, "apb_pclk"); + if (IS_ERR(thermal->pclk)) { + error = PTR_ERR(thermal->clk); + dev_err(&pdev->dev, "failed to get apb_pclk clock: %d\n", + error); + return error; + } + + error = clk_prepare_enable(thermal->clk); + if (error) { + dev_err(&pdev->dev, "failed to enable converter clock: %d\n", + error); + return error; + } + + error = clk_prepare_enable(thermal->pclk); + if (error) { + dev_err(&pdev->dev, "failed to enable pclk: %d\n", error); + goto err_disable_clk; + } + + rockchip_thermal_reset_controller(thermal->reset); + + error = rockchip_configure_from_dt(&pdev->dev, np, thermal); + if (error) { + dev_err(&pdev->dev, "failed to parse device tree data: %d\n", + error); + goto err_disable_pclk; + } + + thermal->chip->initialize(thermal->regs, thermal->tshut_polarity); + + error = rockchip_thermal_register_sensor(pdev, thermal, + &thermal->sensors[0], + SENSOR_CPU); + if (error) { + dev_err(&pdev->dev, + "failed to register CPU thermal sensor: %d\n", error); + goto err_disable_pclk; + } + + error = rockchip_thermal_register_sensor(pdev, thermal, + &thermal->sensors[1], + SENSOR_GPU); + if (error) { + dev_err(&pdev->dev, + "failed to register GPU thermal sensor: %d\n", error); + goto err_unregister_cpu_sensor; + } + + error = devm_request_threaded_irq(&pdev->dev, irq, NULL, + &rockchip_thermal_alarm_irq_thread, + IRQF_ONESHOT, + "rockchip_thermal", thermal); + if (error) { + dev_err(&pdev->dev, + "failed to request tsadc irq: %d\n", error); + goto err_unregister_gpu_sensor; + } + + thermal->chip->control(thermal->regs, true); + + for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++) + rockchip_thermal_toggle_sensor(&thermal->sensors[i], true); + + platform_set_drvdata(pdev, thermal); + + return 0; + +err_unregister_gpu_sensor: + thermal_zone_of_sensor_unregister(&pdev->dev, thermal->sensors[1].tzd); +err_unregister_cpu_sensor: + thermal_zone_of_sensor_unregister(&pdev->dev, thermal->sensors[0].tzd); +err_disable_pclk: + clk_disable_unprepare(thermal->pclk); +err_disable_clk: + clk_disable_unprepare(thermal->clk); + + return error; +} + +static int rockchip_thermal_remove(struct platform_device *pdev) +{ + struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++) { + struct rockchip_thermal_sensor *sensor = &thermal->sensors[i]; + + rockchip_thermal_toggle_sensor(sensor, false); + thermal_zone_of_sensor_unregister(&pdev->dev, sensor->tzd); + } + + thermal->chip->control(thermal->regs, false); + + clk_disable_unprepare(thermal->pclk); + clk_disable_unprepare(thermal->clk); + + return 0; +} + +static int __maybe_unused rockchip_thermal_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++) + rockchip_thermal_toggle_sensor(&thermal->sensors[i], false); + + thermal->chip->control(thermal->regs, false); + + clk_disable(thermal->pclk); + clk_disable(thermal->clk); + + return 0; +} + +static int __maybe_unused rockchip_thermal_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev); + int i; + int error; + + error = clk_enable(thermal->clk); + if (error) + return error; + + error = clk_enable(thermal->pclk); + if (error) + return error; + + rockchip_thermal_reset_controller(thermal->reset); + + thermal->chip->initialize(thermal->regs, thermal->tshut_polarity); + + for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++) { + enum sensor_id id = thermal->sensors[i].id; + + thermal->chip->set_tshut_mode(id, thermal->regs, + thermal->tshut_mode); + thermal->chip->set_tshut_temp(id, thermal->regs, + thermal->tshut_temp); + } + + thermal->chip->control(thermal->regs, true); + + for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++) + rockchip_thermal_toggle_sensor(&thermal->sensors[i], true); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(rockchip_thermal_pm_ops, + rockchip_thermal_suspend, rockchip_thermal_resume); + +static struct platform_driver rockchip_thermal_driver = { + .driver = { + .name = "rockchip-thermal", + .owner = THIS_MODULE, + .pm = &rockchip_thermal_pm_ops, + .of_match_table = of_rockchip_thermal_match, + }, + .probe = rockchip_thermal_probe, + .remove = rockchip_thermal_remove, +}; + +module_platform_driver(rockchip_thermal_driver); + +MODULE_DESCRIPTION("ROCKCHIP THERMAL Driver"); +MODULE_AUTHOR("Rockchip, Inc."); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:rockchip-thermal"); diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h index 158f5aa8dc5d..cd4471925cdd 100644 --- a/drivers/thermal/samsung/exynos_thermal_common.h +++ b/drivers/thermal/samsung/exynos_thermal_common.h @@ -27,7 +27,6 @@ #define SENSOR_NAME_LEN 16 #define MAX_TRIP_COUNT 8 #define MAX_COOLING_DEVICE 4 -#define MAX_TRIMINFO_CTRL_REG 2 #define ACTIVE_INTERVAL 500 #define IDLE_INTERVAL 10000 diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 49c09243fd38..2a1c4c7a7c1b 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -33,7 +33,87 @@ #include "exynos_thermal_common.h" #include "exynos_tmu.h" -#include "exynos_tmu_data.h" + +/* Exynos generic registers */ +#define EXYNOS_TMU_REG_TRIMINFO 0x0 +#define EXYNOS_TMU_REG_CONTROL 0x20 +#define EXYNOS_TMU_REG_STATUS 0x28 +#define EXYNOS_TMU_REG_CURRENT_TEMP 0x40 +#define EXYNOS_TMU_REG_INTEN 0x70 +#define EXYNOS_TMU_REG_INTSTAT 0x74 +#define EXYNOS_TMU_REG_INTCLEAR 0x78 + +#define EXYNOS_TMU_TEMP_MASK 0xff +#define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24 +#define EXYNOS_TMU_REF_VOLTAGE_MASK 0x1f +#define EXYNOS_TMU_BUF_SLOPE_SEL_MASK 0xf +#define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8 +#define EXYNOS_TMU_CORE_EN_SHIFT 0 + +/* Exynos3250 specific registers */ +#define EXYNOS_TMU_TRIMINFO_CON1 0x10 + +/* Exynos4210 specific registers */ +#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44 +#define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50 + +/* Exynos5250, Exynos4412, Exynos3250 specific registers */ +#define EXYNOS_TMU_TRIMINFO_CON2 0x14 +#define EXYNOS_THD_TEMP_RISE 0x50 +#define EXYNOS_THD_TEMP_FALL 0x54 +#define EXYNOS_EMUL_CON 0x80 + +#define EXYNOS_TRIMINFO_RELOAD_ENABLE 1 +#define EXYNOS_TRIMINFO_25_SHIFT 0 +#define EXYNOS_TRIMINFO_85_SHIFT 8 +#define EXYNOS_TMU_TRIP_MODE_SHIFT 13 +#define EXYNOS_TMU_TRIP_MODE_MASK 0x7 +#define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12 + +#define EXYNOS_TMU_INTEN_RISE0_SHIFT 0 +#define EXYNOS_TMU_INTEN_RISE1_SHIFT 4 +#define EXYNOS_TMU_INTEN_RISE2_SHIFT 8 +#define EXYNOS_TMU_INTEN_RISE3_SHIFT 12 +#define EXYNOS_TMU_INTEN_FALL0_SHIFT 16 + +#define EXYNOS_EMUL_TIME 0x57F0 +#define EXYNOS_EMUL_TIME_MASK 0xffff +#define EXYNOS_EMUL_TIME_SHIFT 16 +#define EXYNOS_EMUL_DATA_SHIFT 8 +#define EXYNOS_EMUL_DATA_MASK 0xFF +#define EXYNOS_EMUL_ENABLE 0x1 + +/* Exynos5260 specific */ +#define EXYNOS5260_TMU_REG_INTEN 0xC0 +#define EXYNOS5260_TMU_REG_INTSTAT 0xC4 +#define EXYNOS5260_TMU_REG_INTCLEAR 0xC8 +#define EXYNOS5260_EMUL_CON 0x100 + +/* Exynos4412 specific */ +#define EXYNOS4412_MUX_ADDR_VALUE 6 +#define EXYNOS4412_MUX_ADDR_SHIFT 20 + +/*exynos5440 specific registers*/ +#define EXYNOS5440_TMU_S0_7_TRIM 0x000 +#define EXYNOS5440_TMU_S0_7_CTRL 0x020 +#define EXYNOS5440_TMU_S0_7_DEBUG 0x040 +#define EXYNOS5440_TMU_S0_7_TEMP 0x0f0 +#define EXYNOS5440_TMU_S0_7_TH0 0x110 +#define EXYNOS5440_TMU_S0_7_TH1 0x130 +#define EXYNOS5440_TMU_S0_7_TH2 0x150 +#define EXYNOS5440_TMU_S0_7_IRQEN 0x210 +#define EXYNOS5440_TMU_S0_7_IRQ 0x230 +/* exynos5440 common registers */ +#define EXYNOS5440_TMU_IRQ_STATUS 0x000 +#define EXYNOS5440_TMU_PMIN 0x004 + +#define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0 +#define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1 +#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2 +#define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3 +#define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4 +#define EXYNOS5440_TMU_TH_RISE4_SHIFT 24 +#define EXYNOS5440_EFUSE_SWAP_OFFSET 8 /** * struct exynos_tmu_data : A structure to hold the private data of the TMU @@ -52,6 +132,11 @@ * @temp_error2: fused value of the second point trim. * @regulator: pointer to the TMU regulator structure. * @reg_conf: pointer to structure to register with core thermal. + * @tmu_initialize: SoC specific TMU initialization method + * @tmu_control: SoC specific TMU control method + * @tmu_read: SoC specific TMU temperature read method + * @tmu_set_emulation: SoC specific TMU emulation setting method + * @tmu_clear_irqs: SoC specific TMU interrupts clearing method */ struct exynos_tmu_data { int id; @@ -66,6 +151,12 @@ struct exynos_tmu_data { u8 temp_error1, temp_error2; struct regulator *regulator; struct thermal_sensor_conf *reg_conf; + int (*tmu_initialize)(struct platform_device *pdev); + void (*tmu_control)(struct platform_device *pdev, bool on); + int (*tmu_read)(struct exynos_tmu_data *data); + void (*tmu_set_emulation)(struct exynos_tmu_data *data, + unsigned long temp); + void (*tmu_clear_irqs)(struct exynos_tmu_data *data); }; /* @@ -122,83 +213,10 @@ static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code) return temp; } -static void exynos_tmu_clear_irqs(struct exynos_tmu_data *data) -{ - const struct exynos_tmu_registers *reg = data->pdata->registers; - unsigned int val_irq; - - val_irq = readl(data->base + reg->tmu_intstat); - /* - * Clear the interrupts. Please note that the documentation for - * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly - * states that INTCLEAR register has a different placing of bits - * responsible for FALL IRQs than INTSTAT register. Exynos5420 - * and Exynos5440 documentation is correct (Exynos4210 doesn't - * support FALL IRQs at all). - */ - writel(val_irq, data->base + reg->tmu_intclear); -} - -static int exynos_tmu_initialize(struct platform_device *pdev) +static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info) { - struct exynos_tmu_data *data = platform_get_drvdata(pdev); struct exynos_tmu_platform_data *pdata = data->pdata; - const struct exynos_tmu_registers *reg = pdata->registers; - unsigned int status, trim_info = 0, con, ctrl; - unsigned int rising_threshold = 0, falling_threshold = 0; - int ret = 0, threshold_code, i; - - mutex_lock(&data->lock); - clk_enable(data->clk); - if (!IS_ERR(data->clk_sec)) - clk_enable(data->clk_sec); - if (TMU_SUPPORTS(pdata, READY_STATUS)) { - status = readb(data->base + reg->tmu_status); - if (!status) { - ret = -EBUSY; - goto out; - } - } - - if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) { - for (i = 0; i < reg->triminfo_ctrl_count; i++) { - if (pdata->triminfo_reload[i]) { - ctrl = readl(data->base + - reg->triminfo_ctrl[i]); - ctrl |= pdata->triminfo_reload[i]; - writel(ctrl, data->base + - reg->triminfo_ctrl[i]); - } - } - } - - /* Save trimming info in order to perform calibration */ - if (data->soc == SOC_ARCH_EXYNOS5440) { - /* - * For exynos5440 soc triminfo value is swapped between TMU0 and - * TMU2, so the below logic is needed. - */ - switch (data->id) { - case 0: - trim_info = readl(data->base + - EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data); - break; - case 1: - trim_info = readl(data->base + reg->triminfo_data); - break; - case 2: - trim_info = readl(data->base - - EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data); - } - } else { - /* On exynos5420 the triminfo register is in the shared space */ - if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) - trim_info = readl(data->base_second + - reg->triminfo_data); - else - trim_info = readl(data->base + reg->triminfo_data); - } data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK; data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) & EXYNOS_TMU_TEMP_MASK); @@ -212,69 +230,37 @@ static int exynos_tmu_initialize(struct platform_device *pdev) data->temp_error2 = (pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) & EXYNOS_TMU_TEMP_MASK; +} - rising_threshold = readl(data->base + reg->threshold_th0); +static u32 get_th_reg(struct exynos_tmu_data *data, u32 threshold, bool falling) +{ + struct exynos_tmu_platform_data *pdata = data->pdata; + int i; - if (data->soc == SOC_ARCH_EXYNOS4210) { - /* Write temperature code for threshold */ - threshold_code = temp_to_code(data, pdata->threshold); - writeb(threshold_code, - data->base + reg->threshold_temp); - for (i = 0; i < pdata->non_hw_trigger_levels; i++) - writeb(pdata->trigger_levels[i], data->base + - reg->threshold_th0 + i * sizeof(reg->threshold_th0)); + for (i = 0; i < pdata->non_hw_trigger_levels; i++) { + u8 temp = pdata->trigger_levels[i]; - exynos_tmu_clear_irqs(data); - } else { - /* Write temperature code for rising and falling threshold */ - for (i = 0; i < pdata->non_hw_trigger_levels; i++) { - threshold_code = temp_to_code(data, - pdata->trigger_levels[i]); - rising_threshold &= ~(0xff << 8 * i); - rising_threshold |= threshold_code << 8 * i; - if (pdata->threshold_falling) { - threshold_code = temp_to_code(data, - pdata->trigger_levels[i] - - pdata->threshold_falling); - falling_threshold |= threshold_code << 8 * i; - } - } + if (falling) + temp -= pdata->threshold_falling; + else + threshold &= ~(0xff << 8 * i); - writel(rising_threshold, - data->base + reg->threshold_th0); - writel(falling_threshold, - data->base + reg->threshold_th1); - - exynos_tmu_clear_irqs(data); - - /* if last threshold limit is also present */ - i = pdata->max_trigger_level - 1; - if (pdata->trigger_levels[i] && - (pdata->trigger_type[i] == HW_TRIP)) { - threshold_code = temp_to_code(data, - pdata->trigger_levels[i]); - if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) { - /* 1-4 level to be assigned in th0 reg */ - rising_threshold &= ~(0xff << 8 * i); - rising_threshold |= threshold_code << 8 * i; - writel(rising_threshold, - data->base + reg->threshold_th0); - } else if (i == EXYNOS_MAX_TRIGGER_PER_REG) { - /* 5th level to be assigned in th2 reg */ - rising_threshold = - threshold_code << reg->threshold_th3_l0_shift; - writel(rising_threshold, - data->base + reg->threshold_th2); - } - con = readl(data->base + reg->tmu_ctrl); - con |= (1 << reg->therm_trip_en_shift); - writel(con, data->base + reg->tmu_ctrl); - } + threshold |= temp_to_code(data, temp) << 8 * i; } - /*Clear the PMIN in the common TMU register*/ - if (reg->tmu_pmin && !data->id) - writel(0, data->base_second + reg->tmu_pmin); -out: + + return threshold; +} + +static int exynos_tmu_initialize(struct platform_device *pdev) +{ + struct exynos_tmu_data *data = platform_get_drvdata(pdev); + int ret; + + mutex_lock(&data->lock); + clk_enable(data->clk); + if (!IS_ERR(data->clk_sec)) + clk_enable(data->clk_sec); + ret = data->tmu_initialize(pdev); clk_disable(data->clk); mutex_unlock(&data->lock); if (!IS_ERR(data->clk_sec)) @@ -283,20 +269,13 @@ out: return ret; } -static void exynos_tmu_control(struct platform_device *pdev, bool on) +static u32 get_con_reg(struct exynos_tmu_data *data, u32 con) { - struct exynos_tmu_data *data = platform_get_drvdata(pdev); struct exynos_tmu_platform_data *pdata = data->pdata; - const struct exynos_tmu_registers *reg = pdata->registers; - unsigned int con, interrupt_en; - mutex_lock(&data->lock); - clk_enable(data->clk); - - con = readl(data->base + reg->tmu_ctrl); - - if (pdata->test_mux) - con |= (pdata->test_mux << reg->test_mux_addr_shift); + if (data->soc == SOC_ARCH_EXYNOS4412 || + data->soc == SOC_ARCH_EXYNOS3250) + con |= (EXYNOS4412_MUX_ADDR_VALUE << EXYNOS4412_MUX_ADDR_SHIFT); con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT); con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT; @@ -305,95 +284,287 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); if (pdata->noise_cancel_mode) { - con &= ~(reg->therm_trip_mode_mask << - reg->therm_trip_mode_shift); - con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift); + con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT); + con |= (pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT); } - if (on) { - con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); - interrupt_en = - pdata->trigger_enable[3] << reg->inten_rise3_shift | - pdata->trigger_enable[2] << reg->inten_rise2_shift | - pdata->trigger_enable[1] << reg->inten_rise1_shift | - pdata->trigger_enable[0] << reg->inten_rise0_shift; - if (TMU_SUPPORTS(pdata, FALLING_TRIP)) - interrupt_en |= - interrupt_en << reg->inten_fall0_shift; - } else { - con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); - interrupt_en = 0; /* Disable all interrupts */ - } - writel(interrupt_en, data->base + reg->tmu_inten); - writel(con, data->base + reg->tmu_ctrl); + return con; +} + +static void exynos_tmu_control(struct platform_device *pdev, bool on) +{ + struct exynos_tmu_data *data = platform_get_drvdata(pdev); + mutex_lock(&data->lock); + clk_enable(data->clk); + data->tmu_control(pdev, on); clk_disable(data->clk); mutex_unlock(&data->lock); } -static int exynos_tmu_read(struct exynos_tmu_data *data) +static int exynos4210_tmu_initialize(struct platform_device *pdev) { + struct exynos_tmu_data *data = platform_get_drvdata(pdev); struct exynos_tmu_platform_data *pdata = data->pdata; - const struct exynos_tmu_registers *reg = pdata->registers; - u8 temp_code; - int temp; + unsigned int status; + int ret = 0, threshold_code, i; - mutex_lock(&data->lock); - clk_enable(data->clk); + status = readb(data->base + EXYNOS_TMU_REG_STATUS); + if (!status) { + ret = -EBUSY; + goto out; + } - temp_code = readb(data->base + reg->tmu_cur_temp); + sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO)); - if (data->soc == SOC_ARCH_EXYNOS4210) - /* temp_code should range between 75 and 175 */ - if (temp_code < 75 || temp_code > 175) { - temp = -ENODATA; - goto out; + /* Write temperature code for threshold */ + threshold_code = temp_to_code(data, pdata->threshold); + writeb(threshold_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP); + + for (i = 0; i < pdata->non_hw_trigger_levels; i++) + writeb(pdata->trigger_levels[i], data->base + + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4); + + data->tmu_clear_irqs(data); +out: + return ret; +} + +static int exynos4412_tmu_initialize(struct platform_device *pdev) +{ + struct exynos_tmu_data *data = platform_get_drvdata(pdev); + struct exynos_tmu_platform_data *pdata = data->pdata; + unsigned int status, trim_info, con, ctrl, rising_threshold; + int ret = 0, threshold_code, i; + + status = readb(data->base + EXYNOS_TMU_REG_STATUS); + if (!status) { + ret = -EBUSY; + goto out; + } + + if (data->soc == SOC_ARCH_EXYNOS3250 || + data->soc == SOC_ARCH_EXYNOS4412 || + data->soc == SOC_ARCH_EXYNOS5250) { + if (data->soc == SOC_ARCH_EXYNOS3250) { + ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON1); + ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE; + writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON1); } + ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON2); + ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE; + writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON2); + } - temp = code_to_temp(data, temp_code); + /* On exynos5420 the triminfo register is in the shared space */ + if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) + trim_info = readl(data->base_second + EXYNOS_TMU_REG_TRIMINFO); + else + trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); + + sanitize_temp_error(data, trim_info); + + /* Write temperature code for rising and falling threshold */ + rising_threshold = readl(data->base + EXYNOS_THD_TEMP_RISE); + rising_threshold = get_th_reg(data, rising_threshold, false); + writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE); + writel(get_th_reg(data, 0, true), data->base + EXYNOS_THD_TEMP_FALL); + + data->tmu_clear_irqs(data); + + /* if last threshold limit is also present */ + i = pdata->max_trigger_level - 1; + if (pdata->trigger_levels[i] && pdata->trigger_type[i] == HW_TRIP) { + threshold_code = temp_to_code(data, pdata->trigger_levels[i]); + /* 1-4 level to be assigned in th0 reg */ + rising_threshold &= ~(0xff << 8 * i); + rising_threshold |= threshold_code << 8 * i; + writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE); + con = readl(data->base + EXYNOS_TMU_REG_CONTROL); + con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT); + writel(con, data->base + EXYNOS_TMU_REG_CONTROL); + } out: - clk_disable(data->clk); - mutex_unlock(&data->lock); + return ret; +} - return temp; +static int exynos5440_tmu_initialize(struct platform_device *pdev) +{ + struct exynos_tmu_data *data = platform_get_drvdata(pdev); + struct exynos_tmu_platform_data *pdata = data->pdata; + unsigned int trim_info = 0, con, rising_threshold; + int ret = 0, threshold_code, i; + + /* + * For exynos5440 soc triminfo value is swapped between TMU0 and + * TMU2, so the below logic is needed. + */ + switch (data->id) { + case 0: + trim_info = readl(data->base + EXYNOS5440_EFUSE_SWAP_OFFSET + + EXYNOS5440_TMU_S0_7_TRIM); + break; + case 1: + trim_info = readl(data->base + EXYNOS5440_TMU_S0_7_TRIM); + break; + case 2: + trim_info = readl(data->base - EXYNOS5440_EFUSE_SWAP_OFFSET + + EXYNOS5440_TMU_S0_7_TRIM); + } + sanitize_temp_error(data, trim_info); + + /* Write temperature code for rising and falling threshold */ + rising_threshold = readl(data->base + EXYNOS5440_TMU_S0_7_TH0); + rising_threshold = get_th_reg(data, rising_threshold, false); + writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH0); + writel(0, data->base + EXYNOS5440_TMU_S0_7_TH1); + + data->tmu_clear_irqs(data); + + /* if last threshold limit is also present */ + i = pdata->max_trigger_level - 1; + if (pdata->trigger_levels[i] && pdata->trigger_type[i] == HW_TRIP) { + threshold_code = temp_to_code(data, pdata->trigger_levels[i]); + /* 5th level to be assigned in th2 reg */ + rising_threshold = + threshold_code << EXYNOS5440_TMU_TH_RISE4_SHIFT; + writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH2); + con = readl(data->base + EXYNOS5440_TMU_S0_7_CTRL); + con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT); + writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL); + } + /* Clear the PMIN in the common TMU register */ + if (!data->id) + writel(0, data->base_second + EXYNOS5440_TMU_PMIN); + return ret; } -#ifdef CONFIG_THERMAL_EMULATION -static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp) +static void exynos4210_tmu_control(struct platform_device *pdev, bool on) { - struct exynos_tmu_data *data = drv_data; + struct exynos_tmu_data *data = platform_get_drvdata(pdev); struct exynos_tmu_platform_data *pdata = data->pdata; - const struct exynos_tmu_registers *reg = pdata->registers; - unsigned int val; - int ret = -EINVAL; + unsigned int con, interrupt_en; - if (!TMU_SUPPORTS(pdata, EMULATION)) - goto out; + con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); - if (temp && temp < MCELSIUS) - goto out; + if (on) { + con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); + interrupt_en = + pdata->trigger_enable[3] << EXYNOS_TMU_INTEN_RISE3_SHIFT | + pdata->trigger_enable[2] << EXYNOS_TMU_INTEN_RISE2_SHIFT | + pdata->trigger_enable[1] << EXYNOS_TMU_INTEN_RISE1_SHIFT | + pdata->trigger_enable[0] << EXYNOS_TMU_INTEN_RISE0_SHIFT; + if (data->soc != SOC_ARCH_EXYNOS4210) + interrupt_en |= + interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; + } else { + con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); + interrupt_en = 0; /* Disable all interrupts */ + } + writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN); + writel(con, data->base + EXYNOS_TMU_REG_CONTROL); +} + +static void exynos5440_tmu_control(struct platform_device *pdev, bool on) +{ + struct exynos_tmu_data *data = platform_get_drvdata(pdev); + struct exynos_tmu_platform_data *pdata = data->pdata; + unsigned int con, interrupt_en; + + con = get_con_reg(data, readl(data->base + EXYNOS5440_TMU_S0_7_CTRL)); + + if (on) { + con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); + interrupt_en = + pdata->trigger_enable[3] << EXYNOS5440_TMU_INTEN_RISE3_SHIFT | + pdata->trigger_enable[2] << EXYNOS5440_TMU_INTEN_RISE2_SHIFT | + pdata->trigger_enable[1] << EXYNOS5440_TMU_INTEN_RISE1_SHIFT | + pdata->trigger_enable[0] << EXYNOS5440_TMU_INTEN_RISE0_SHIFT; + interrupt_en |= interrupt_en << EXYNOS5440_TMU_INTEN_FALL0_SHIFT; + } else { + con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); + interrupt_en = 0; /* Disable all interrupts */ + } + writel(interrupt_en, data->base + EXYNOS5440_TMU_S0_7_IRQEN); + writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL); +} + +static int exynos_tmu_read(struct exynos_tmu_data *data) +{ + int ret; mutex_lock(&data->lock); clk_enable(data->clk); + ret = data->tmu_read(data); + if (ret >= 0) + ret = code_to_temp(data, ret); + clk_disable(data->clk); + mutex_unlock(&data->lock); - val = readl(data->base + reg->emul_con); + return ret; +} +#ifdef CONFIG_THERMAL_EMULATION +static u32 get_emul_con_reg(struct exynos_tmu_data *data, unsigned int val, + unsigned long temp) +{ if (temp) { temp /= MCELSIUS; - if (TMU_SUPPORTS(pdata, EMUL_TIME)) { - val &= ~(EXYNOS_EMUL_TIME_MASK << reg->emul_time_shift); - val |= (EXYNOS_EMUL_TIME << reg->emul_time_shift); + if (data->soc != SOC_ARCH_EXYNOS5440) { + val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT); + val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT); } - val &= ~(EXYNOS_EMUL_DATA_MASK << reg->emul_temp_shift); - val |= (temp_to_code(data, temp) << reg->emul_temp_shift) | + val &= ~(EXYNOS_EMUL_DATA_MASK << EXYNOS_EMUL_DATA_SHIFT); + val |= (temp_to_code(data, temp) << EXYNOS_EMUL_DATA_SHIFT) | EXYNOS_EMUL_ENABLE; } else { val &= ~EXYNOS_EMUL_ENABLE; } - writel(val, data->base + reg->emul_con); + return val; +} + +static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data, + unsigned long temp) +{ + unsigned int val; + u32 emul_con; + + if (data->soc == SOC_ARCH_EXYNOS5260) + emul_con = EXYNOS5260_EMUL_CON; + else + emul_con = EXYNOS_EMUL_CON; + + val = readl(data->base + emul_con); + val = get_emul_con_reg(data, val, temp); + writel(val, data->base + emul_con); +} + +static void exynos5440_tmu_set_emulation(struct exynos_tmu_data *data, + unsigned long temp) +{ + unsigned int val; + + val = readl(data->base + EXYNOS5440_TMU_S0_7_DEBUG); + val = get_emul_con_reg(data, val, temp); + writel(val, data->base + EXYNOS5440_TMU_S0_7_DEBUG); +} + +static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp) +{ + struct exynos_tmu_data *data = drv_data; + int ret = -EINVAL; + + if (data->soc == SOC_ARCH_EXYNOS4210) + goto out; + if (temp && temp < MCELSIUS) + goto out; + + mutex_lock(&data->lock); + clk_enable(data->clk); + data->tmu_set_emulation(data, temp); clk_disable(data->clk); mutex_unlock(&data->lock); return 0; @@ -401,23 +572,41 @@ out: return ret; } #else +#define exynos4412_tmu_set_emulation NULL +#define exynos5440_tmu_set_emulation NULL static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp) { return -EINVAL; } #endif/*CONFIG_THERMAL_EMULATION*/ +static int exynos4210_tmu_read(struct exynos_tmu_data *data) +{ + int ret = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP); + + /* "temp_code" should range between 75 and 175 */ + return (ret < 75 || ret > 175) ? -ENODATA : ret; +} + +static int exynos4412_tmu_read(struct exynos_tmu_data *data) +{ + return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP); +} + +static int exynos5440_tmu_read(struct exynos_tmu_data *data) +{ + return readb(data->base + EXYNOS5440_TMU_S0_7_TEMP); +} + static void exynos_tmu_work(struct work_struct *work) { struct exynos_tmu_data *data = container_of(work, struct exynos_tmu_data, irq_work); - struct exynos_tmu_platform_data *pdata = data->pdata; - const struct exynos_tmu_registers *reg = pdata->registers; unsigned int val_type; if (!IS_ERR(data->clk_sec)) clk_enable(data->clk_sec); /* Find which sensor generated this interrupt */ - if (reg->tmu_irqstatus) { - val_type = readl(data->base_second + reg->tmu_irqstatus); + if (data->soc == SOC_ARCH_EXYNOS5440) { + val_type = readl(data->base_second + EXYNOS5440_TMU_IRQ_STATUS); if (!((val_type >> data->id) & 0x1)) goto out; } @@ -429,7 +618,7 @@ static void exynos_tmu_work(struct work_struct *work) clk_enable(data->clk); /* TODO: take action based on particular interrupt */ - exynos_tmu_clear_irqs(data); + data->tmu_clear_irqs(data); clk_disable(data->clk); mutex_unlock(&data->lock); @@ -437,6 +626,40 @@ out: enable_irq(data->irq); } +static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data) +{ + unsigned int val_irq; + u32 tmu_intstat, tmu_intclear; + + if (data->soc == SOC_ARCH_EXYNOS5260) { + tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT; + tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR; + } else { + tmu_intstat = EXYNOS_TMU_REG_INTSTAT; + tmu_intclear = EXYNOS_TMU_REG_INTCLEAR; + } + + val_irq = readl(data->base + tmu_intstat); + /* + * Clear the interrupts. Please note that the documentation for + * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly + * states that INTCLEAR register has a different placing of bits + * responsible for FALL IRQs than INTSTAT register. Exynos5420 + * and Exynos5440 documentation is correct (Exynos4210 doesn't + * support FALL IRQs at all). + */ + writel(val_irq, data->base + tmu_intclear); +} + +static void exynos5440_tmu_clear_irqs(struct exynos_tmu_data *data) +{ + unsigned int val_irq; + + val_irq = readl(data->base + EXYNOS5440_TMU_S0_7_IRQ); + /* clear the interrupts */ + writel(val_irq, data->base + EXYNOS5440_TMU_S0_7_IRQ); +} + static irqreturn_t exynos_tmu_irq(int irq, void *id) { struct exynos_tmu_data *data = id; @@ -450,35 +673,35 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id) static const struct of_device_id exynos_tmu_match[] = { { .compatible = "samsung,exynos3250-tmu", - .data = (void *)EXYNOS3250_TMU_DRV_DATA, + .data = &exynos3250_default_tmu_data, }, { .compatible = "samsung,exynos4210-tmu", - .data = (void *)EXYNOS4210_TMU_DRV_DATA, + .data = &exynos4210_default_tmu_data, }, { .compatible = "samsung,exynos4412-tmu", - .data = (void *)EXYNOS4412_TMU_DRV_DATA, + .data = &exynos4412_default_tmu_data, }, { .compatible = "samsung,exynos5250-tmu", - .data = (void *)EXYNOS5250_TMU_DRV_DATA, + .data = &exynos5250_default_tmu_data, }, { .compatible = "samsung,exynos5260-tmu", - .data = (void *)EXYNOS5260_TMU_DRV_DATA, + .data = &exynos5260_default_tmu_data, }, { .compatible = "samsung,exynos5420-tmu", - .data = (void *)EXYNOS5420_TMU_DRV_DATA, + .data = &exynos5420_default_tmu_data, }, { .compatible = "samsung,exynos5420-tmu-ext-triminfo", - .data = (void *)EXYNOS5420_TMU_DRV_DATA, + .data = &exynos5420_default_tmu_data, }, { .compatible = "samsung,exynos5440-tmu", - .data = (void *)EXYNOS5440_TMU_DRV_DATA, + .data = &exynos5440_default_tmu_data, }, {}, }; @@ -553,12 +776,47 @@ static int exynos_map_dt_data(struct platform_device *pdev) dev_err(&pdev->dev, "No platform init data supplied.\n"); return -ENODEV; } + data->pdata = pdata; + data->soc = pdata->type; + + switch (data->soc) { + case SOC_ARCH_EXYNOS4210: + data->tmu_initialize = exynos4210_tmu_initialize; + data->tmu_control = exynos4210_tmu_control; + data->tmu_read = exynos4210_tmu_read; + data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; + break; + case SOC_ARCH_EXYNOS3250: + case SOC_ARCH_EXYNOS4412: + case SOC_ARCH_EXYNOS5250: + case SOC_ARCH_EXYNOS5260: + case SOC_ARCH_EXYNOS5420: + case SOC_ARCH_EXYNOS5420_TRIMINFO: + data->tmu_initialize = exynos4412_tmu_initialize; + data->tmu_control = exynos4210_tmu_control; + data->tmu_read = exynos4412_tmu_read; + data->tmu_set_emulation = exynos4412_tmu_set_emulation; + data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; + break; + case SOC_ARCH_EXYNOS5440: + data->tmu_initialize = exynos5440_tmu_initialize; + data->tmu_control = exynos5440_tmu_control; + data->tmu_read = exynos5440_tmu_read; + data->tmu_set_emulation = exynos5440_tmu_set_emulation; + data->tmu_clear_irqs = exynos5440_tmu_clear_irqs; + break; + default: + dev_err(&pdev->dev, "Platform not supported\n"); + return -EINVAL; + } + /* * Check if the TMU shares some registers and then try to map the * memory of common registers. */ - if (!TMU_SUPPORTS(pdata, ADDRESS_MULTIPLE)) + if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO && + data->soc != SOC_ARCH_EXYNOS5440) return 0; if (of_address_to_resource(pdev->dev.of_node, 1, &res)) { @@ -625,20 +883,6 @@ static int exynos_tmu_probe(struct platform_device *pdev) goto err_clk_sec; } - if (pdata->type == SOC_ARCH_EXYNOS3250 || - pdata->type == SOC_ARCH_EXYNOS4210 || - pdata->type == SOC_ARCH_EXYNOS4412 || - pdata->type == SOC_ARCH_EXYNOS5250 || - pdata->type == SOC_ARCH_EXYNOS5260 || - pdata->type == SOC_ARCH_EXYNOS5420_TRIMINFO || - pdata->type == SOC_ARCH_EXYNOS5440) - data->soc = pdata->type; - else { - ret = -EINVAL; - dev_err(&pdev->dev, "Platform not supported\n"); - goto err_clk; - } - ret = exynos_tmu_initialize(pdev); if (ret) { dev_err(&pdev->dev, "Failed to initialize TMU\n"); diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h index c58c7663a3fe..da3009bff6c4 100644 --- a/drivers/thermal/samsung/exynos_tmu.h +++ b/drivers/thermal/samsung/exynos_tmu.h @@ -40,115 +40,12 @@ enum soc_type { SOC_ARCH_EXYNOS4412, SOC_ARCH_EXYNOS5250, SOC_ARCH_EXYNOS5260, + SOC_ARCH_EXYNOS5420, SOC_ARCH_EXYNOS5420_TRIMINFO, SOC_ARCH_EXYNOS5440, }; /** - * EXYNOS TMU supported features. - * TMU_SUPPORT_EMULATION - This features is used to set user defined - * temperature to the TMU controller. - * TMU_SUPPORT_MULTI_INST - This features denotes that the soc - * has many instances of TMU. - * TMU_SUPPORT_TRIM_RELOAD - This features shows that trimming can - * be reloaded. - * TMU_SUPPORT_FALLING_TRIP - This features shows that interrupt can - * be registered for falling trips also. - * TMU_SUPPORT_READY_STATUS - This feature tells that the TMU current - * state(active/idle) can be checked. - * TMU_SUPPORT_EMUL_TIME - This features allows to set next temp emulation - * sample time. - * TMU_SUPPORT_ADDRESS_MULTIPLE - This feature tells that the different TMU - * sensors shares some common registers. - * TMU_SUPPORT - macro to compare the above features with the supplied. - */ -#define TMU_SUPPORT_EMULATION BIT(0) -#define TMU_SUPPORT_MULTI_INST BIT(1) -#define TMU_SUPPORT_TRIM_RELOAD BIT(2) -#define TMU_SUPPORT_FALLING_TRIP BIT(3) -#define TMU_SUPPORT_READY_STATUS BIT(4) -#define TMU_SUPPORT_EMUL_TIME BIT(5) -#define TMU_SUPPORT_ADDRESS_MULTIPLE BIT(6) - -#define TMU_SUPPORTS(a, b) (a->features & TMU_SUPPORT_ ## b) - -/** - * struct exynos_tmu_register - register descriptors to access registers and - * bitfields. The register validity, offsets and bitfield values may vary - * slightly across different exynos SOC's. - * @triminfo_data: register containing 2 pont trimming data - * @triminfo_ctrl: trim info controller register. - * @triminfo_ctrl_count: the number of trim info controller register. - * @tmu_ctrl: TMU main controller register. - * @test_mux_addr_shift: shift bits of test mux address. - * @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register. - * @therm_trip_mode_mask: mask bits of tripping mode in tmu_ctrl register. - * @therm_trip_en_shift: shift bits of tripping enable in tmu_ctrl register. - * @tmu_status: register drescribing the TMU status. - * @tmu_cur_temp: register containing the current temperature of the TMU. - * @threshold_temp: register containing the base threshold level. - * @threshold_th0: Register containing first set of rising levels. - * @threshold_th1: Register containing second set of rising levels. - * @threshold_th2: Register containing third set of rising levels. - * @threshold_th3_l0_shift: shift bits of level0 threshold temperature. - * @tmu_inten: register containing the different threshold interrupt - enable bits. - * @inten_rise0_shift: shift bits of rising 0 interrupt bits. - * @inten_rise1_shift: shift bits of rising 1 interrupt bits. - * @inten_rise2_shift: shift bits of rising 2 interrupt bits. - * @inten_rise3_shift: shift bits of rising 3 interrupt bits. - * @inten_fall0_shift: shift bits of falling 0 interrupt bits. - * @tmu_intstat: Register containing the interrupt status values. - * @tmu_intclear: Register for clearing the raised interrupt status. - * @emul_con: TMU emulation controller register. - * @emul_temp_shift: shift bits of emulation temperature. - * @emul_time_shift: shift bits of emulation time. - * @tmu_irqstatus: register to find which TMU generated interrupts. - * @tmu_pmin: register to get/set the Pmin value. - */ -struct exynos_tmu_registers { - u32 triminfo_data; - - u32 triminfo_ctrl[MAX_TRIMINFO_CTRL_REG]; - u32 triminfo_ctrl_count; - - u32 tmu_ctrl; - u32 test_mux_addr_shift; - u32 therm_trip_mode_shift; - u32 therm_trip_mode_mask; - u32 therm_trip_en_shift; - - u32 tmu_status; - - u32 tmu_cur_temp; - - u32 threshold_temp; - - u32 threshold_th0; - u32 threshold_th1; - u32 threshold_th2; - u32 threshold_th3_l0_shift; - - u32 tmu_inten; - u32 inten_rise0_shift; - u32 inten_rise1_shift; - u32 inten_rise2_shift; - u32 inten_rise3_shift; - u32 inten_fall0_shift; - - u32 tmu_intstat; - - u32 tmu_intclear; - - u32 emul_con; - u32 emul_temp_shift; - u32 emul_time_shift; - - u32 tmu_irqstatus; - u32 tmu_pmin; -}; - -/** * struct exynos_tmu_platform_data * @threshold: basic temperature for generating interrupt * 25 <= threshold <= 125 [unit: degree Celsius] @@ -192,16 +89,10 @@ struct exynos_tmu_registers { * @first_point_trim: temp value of the first point trimming * @second_point_trim: temp value of the second point trimming * @default_temp_offset: default temperature offset in case of no trimming - * @test_mux; information if SoC supports test MUX - * @triminfo_reload: reload value to read TRIMINFO register * @cal_type: calibration type for temperature * @freq_clip_table: Table representing frequency reduction percentage. * @freq_tab_count: Count of the above table as frequency reduction may * applicable to only some of the trigger levels. - * @registers: Pointer to structure containing all the TMU controller registers - * and bitfields shifts and masks. - * @features: a bitfield value indicating the features supported in SOC like - * emulation, multi instance etc * * This structure is required for configuration of exynos_tmu driver. */ @@ -223,15 +114,11 @@ struct exynos_tmu_platform_data { u8 first_point_trim; u8 second_point_trim; u8 default_temp_offset; - u8 test_mux; - u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG]; enum calibration_type cal_type; enum soc_type type; struct freq_clip_table freq_tab[4]; unsigned int freq_tab_count; - const struct exynos_tmu_registers *registers; - unsigned int features; }; /** @@ -246,4 +133,12 @@ struct exynos_tmu_init_data { struct exynos_tmu_platform_data tmu_data[]; }; +extern struct exynos_tmu_init_data const exynos3250_default_tmu_data; +extern struct exynos_tmu_init_data const exynos4210_default_tmu_data; +extern struct exynos_tmu_init_data const exynos4412_default_tmu_data; +extern struct exynos_tmu_init_data const exynos5250_default_tmu_data; +extern struct exynos_tmu_init_data const exynos5260_default_tmu_data; +extern struct exynos_tmu_init_data const exynos5420_default_tmu_data; +extern struct exynos_tmu_init_data const exynos5440_default_tmu_data; + #endif /* _EXYNOS_TMU_H */ diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c index 1724f6cdaef8..b23910069f68 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.c +++ b/drivers/thermal/samsung/exynos_tmu_data.c @@ -22,24 +22,6 @@ #include "exynos_thermal_common.h" #include "exynos_tmu.h" -#include "exynos_tmu_data.h" - -#if defined(CONFIG_CPU_EXYNOS4210) -static const struct exynos_tmu_registers exynos4210_tmu_registers = { - .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, - .tmu_status = EXYNOS_TMU_REG_STATUS, - .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, - .threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP, - .threshold_th0 = EXYNOS4210_TMU_REG_TRIG_LEVEL0, - .tmu_inten = EXYNOS_TMU_REG_INTEN, - .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT, - .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT, - .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT, - .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT, - .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, - .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, -}; struct exynos_tmu_init_data const exynos4210_default_tmu_data = { .tmu_data = { @@ -75,40 +57,10 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = { }, .freq_tab_count = 2, .type = SOC_ARCH_EXYNOS4210, - .registers = &exynos4210_tmu_registers, - .features = TMU_SUPPORT_READY_STATUS, }, }, .tmu_count = 1, }; -#endif - -#if defined(CONFIG_SOC_EXYNOS3250) -static const struct exynos_tmu_registers exynos3250_tmu_registers = { - .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON1, - .triminfo_ctrl[1] = EXYNOS_TMU_TRIMINFO_CON2, - .triminfo_ctrl_count = 2, - .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, - .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT, - .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, - .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, - .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .tmu_status = EXYNOS_TMU_REG_STATUS, - .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, - .threshold_th0 = EXYNOS_THD_TEMP_RISE, - .threshold_th1 = EXYNOS_THD_TEMP_FALL, - .tmu_inten = EXYNOS_TMU_REG_INTEN, - .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT, - .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT, - .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT, - .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, - .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, - .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, - .emul_con = EXYNOS_EMUL_CON, - .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, - .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, -}; #define EXYNOS3250_TMU_DATA \ .threshold_falling = 10, \ @@ -144,54 +96,17 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = { .freq_clip_max = 400 * 1000, \ .temp_level = 95, \ }, \ - .freq_tab_count = 2, \ - .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \ - .triminfo_reload[1] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \ - .registers = &exynos3250_tmu_registers, \ - .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ - TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ - TMU_SUPPORT_EMUL_TIME) -#endif + .freq_tab_count = 2 -#if defined(CONFIG_SOC_EXYNOS3250) struct exynos_tmu_init_data const exynos3250_default_tmu_data = { .tmu_data = { { EXYNOS3250_TMU_DATA, .type = SOC_ARCH_EXYNOS3250, - .test_mux = EXYNOS4412_MUX_ADDR_VALUE, }, }, .tmu_count = 1, }; -#endif - -#if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) -static const struct exynos_tmu_registers exynos4412_tmu_registers = { - .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON2, - .triminfo_ctrl_count = 1, - .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, - .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT, - .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, - .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, - .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .tmu_status = EXYNOS_TMU_REG_STATUS, - .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, - .threshold_th0 = EXYNOS_THD_TEMP_RISE, - .threshold_th1 = EXYNOS_THD_TEMP_FALL, - .tmu_inten = EXYNOS_TMU_REG_INTEN, - .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT, - .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT, - .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT, - .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT, - .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, - .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, - .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, - .emul_con = EXYNOS_EMUL_CON, - .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, - .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, -}; #define EXYNOS4412_TMU_DATA \ .threshold_falling = 10, \ @@ -227,28 +142,18 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = { .freq_clip_max = 400 * 1000, \ .temp_level = 95, \ }, \ - .freq_tab_count = 2, \ - .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \ - .registers = &exynos4412_tmu_registers, \ - .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ - TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ - TMU_SUPPORT_EMUL_TIME) -#endif + .freq_tab_count = 2 -#if defined(CONFIG_SOC_EXYNOS4412) struct exynos_tmu_init_data const exynos4412_default_tmu_data = { .tmu_data = { { EXYNOS4412_TMU_DATA, .type = SOC_ARCH_EXYNOS4412, - .test_mux = EXYNOS4412_MUX_ADDR_VALUE, }, }, .tmu_count = 1, }; -#endif -#if defined(CONFIG_SOC_EXYNOS5250) struct exynos_tmu_init_data const exynos5250_default_tmu_data = { .tmu_data = { { @@ -258,31 +163,6 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = { }, .tmu_count = 1, }; -#endif - -#if defined(CONFIG_SOC_EXYNOS5260) -static const struct exynos_tmu_registers exynos5260_tmu_registers = { - .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, - .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, - .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, - .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .tmu_status = EXYNOS_TMU_REG_STATUS, - .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, - .threshold_th0 = EXYNOS_THD_TEMP_RISE, - .threshold_th1 = EXYNOS_THD_TEMP_FALL, - .tmu_inten = EXYNOS5260_TMU_REG_INTEN, - .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT, - .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT, - .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT, - .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT, - .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, - .tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT, - .tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR, - .emul_con = EXYNOS5260_EMUL_CON, - .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, - .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, -}; #define __EXYNOS5260_TMU_DATA \ .threshold_falling = 10, \ @@ -319,13 +199,10 @@ static const struct exynos_tmu_registers exynos5260_tmu_registers = { .temp_level = 103, \ }, \ .freq_tab_count = 2, \ - .registers = &exynos5260_tmu_registers, \ #define EXYNOS5260_TMU_DATA \ __EXYNOS5260_TMU_DATA \ - .type = SOC_ARCH_EXYNOS5260, \ - .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \ - TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME) + .type = SOC_ARCH_EXYNOS5260 struct exynos_tmu_init_data const exynos5260_default_tmu_data = { .tmu_data = { @@ -337,82 +214,14 @@ struct exynos_tmu_init_data const exynos5260_default_tmu_data = { }, .tmu_count = 5, }; -#endif - -#if defined(CONFIG_SOC_EXYNOS5420) -static const struct exynos_tmu_registers exynos5420_tmu_registers = { - .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, - .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, - .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, - .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .tmu_status = EXYNOS_TMU_REG_STATUS, - .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, - .threshold_th0 = EXYNOS_THD_TEMP_RISE, - .threshold_th1 = EXYNOS_THD_TEMP_FALL, - .tmu_inten = EXYNOS_TMU_REG_INTEN, - .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT, - .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT, - .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT, - /* INTEN_RISE3 Not availble in exynos5420 */ - .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT, - .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, - .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, - .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, - .emul_con = EXYNOS_EMUL_CON, - .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, - .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, -}; - -#define __EXYNOS5420_TMU_DATA \ - .threshold_falling = 10, \ - .trigger_levels[0] = 85, \ - .trigger_levels[1] = 103, \ - .trigger_levels[2] = 110, \ - .trigger_levels[3] = 120, \ - .trigger_enable[0] = true, \ - .trigger_enable[1] = true, \ - .trigger_enable[2] = true, \ - .trigger_enable[3] = false, \ - .trigger_type[0] = THROTTLE_ACTIVE, \ - .trigger_type[1] = THROTTLE_ACTIVE, \ - .trigger_type[2] = SW_TRIP, \ - .trigger_type[3] = HW_TRIP, \ - .max_trigger_level = 4, \ - .non_hw_trigger_levels = 3, \ - .gain = 8, \ - .reference_voltage = 16, \ - .noise_cancel_mode = 4, \ - .cal_type = TYPE_ONE_POINT_TRIMMING, \ - .efuse_value = 55, \ - .min_efuse_value = 40, \ - .max_efuse_value = 100, \ - .first_point_trim = 25, \ - .second_point_trim = 85, \ - .default_temp_offset = 50, \ - .freq_tab[0] = { \ - .freq_clip_max = 800 * 1000, \ - .temp_level = 85, \ - }, \ - .freq_tab[1] = { \ - .freq_clip_max = 200 * 1000, \ - .temp_level = 103, \ - }, \ - .freq_tab_count = 2, \ - .registers = &exynos5420_tmu_registers, \ #define EXYNOS5420_TMU_DATA \ - __EXYNOS5420_TMU_DATA \ - .type = SOC_ARCH_EXYNOS5250, \ - .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \ - TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME) + __EXYNOS5260_TMU_DATA \ + .type = SOC_ARCH_EXYNOS5420 #define EXYNOS5420_TMU_DATA_SHARED \ - __EXYNOS5420_TMU_DATA \ - .type = SOC_ARCH_EXYNOS5420_TRIMINFO, \ - .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \ - TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME | \ - TMU_SUPPORT_ADDRESS_MULTIPLE) + __EXYNOS5260_TMU_DATA \ + .type = SOC_ARCH_EXYNOS5420_TRIMINFO struct exynos_tmu_init_data const exynos5420_default_tmu_data = { .tmu_data = { @@ -424,34 +233,6 @@ struct exynos_tmu_init_data const exynos5420_default_tmu_data = { }, .tmu_count = 5, }; -#endif - -#if defined(CONFIG_SOC_EXYNOS5440) -static const struct exynos_tmu_registers exynos5440_tmu_registers = { - .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM, - .tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL, - .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, - .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, - .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .tmu_status = EXYNOS5440_TMU_S0_7_STATUS, - .tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP, - .threshold_th0 = EXYNOS5440_TMU_S0_7_TH0, - .threshold_th1 = EXYNOS5440_TMU_S0_7_TH1, - .threshold_th2 = EXYNOS5440_TMU_S0_7_TH2, - .threshold_th3_l0_shift = EXYNOS5440_TMU_TH_RISE4_SHIFT, - .tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN, - .inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT, - .inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT, - .inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT, - .inten_rise3_shift = EXYNOS5440_TMU_INTEN_RISE3_SHIFT, - .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT, - .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ, - .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ, - .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS, - .emul_con = EXYNOS5440_TMU_S0_7_DEBUG, - .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, - .tmu_pmin = EXYNOS5440_TMU_PMIN, -}; #define EXYNOS5440_TMU_DATA \ .trigger_levels[0] = 100, \ @@ -471,10 +252,7 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = { .first_point_trim = 25, \ .second_point_trim = 70, \ .default_temp_offset = 25, \ - .type = SOC_ARCH_EXYNOS5440, \ - .registers = &exynos5440_tmu_registers, \ - .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \ - TMU_SUPPORT_MULTI_INST | TMU_SUPPORT_ADDRESS_MULTIPLE), + .type = SOC_ARCH_EXYNOS5440 struct exynos_tmu_init_data const exynos5440_default_tmu_data = { .tmu_data = { @@ -484,4 +262,3 @@ struct exynos_tmu_init_data const exynos5440_default_tmu_data = { }, .tmu_count = 3, }; -#endif diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h deleted file mode 100644 index 63de598c9c2c..000000000000 --- a/drivers/thermal/samsung/exynos_tmu_data.h +++ /dev/null @@ -1,159 +0,0 @@ -/* - * exynos_tmu_data.h - Samsung EXYNOS tmu data header file - * - * Copyright (C) 2013 Samsung Electronics - * Amit Daniel Kachhap <amit.daniel@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef _EXYNOS_TMU_DATA_H -#define _EXYNOS_TMU_DATA_H - -/* Exynos generic registers */ -#define EXYNOS_TMU_REG_TRIMINFO 0x0 -#define EXYNOS_TMU_REG_CONTROL 0x20 -#define EXYNOS_TMU_REG_STATUS 0x28 -#define EXYNOS_TMU_REG_CURRENT_TEMP 0x40 -#define EXYNOS_TMU_REG_INTEN 0x70 -#define EXYNOS_TMU_REG_INTSTAT 0x74 -#define EXYNOS_TMU_REG_INTCLEAR 0x78 - -#define EXYNOS_TMU_TEMP_MASK 0xff -#define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24 -#define EXYNOS_TMU_REF_VOLTAGE_MASK 0x1f -#define EXYNOS_TMU_BUF_SLOPE_SEL_MASK 0xf -#define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8 -#define EXYNOS_TMU_CORE_EN_SHIFT 0 - -/* Exynos3250 specific registers */ -#define EXYNOS_TMU_TRIMINFO_CON1 0x10 - -/* Exynos4210 specific registers */ -#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44 -#define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50 - -/* Exynos5250, Exynos4412, Exynos3250 specific registers */ -#define EXYNOS_TMU_TRIMINFO_CON2 0x14 -#define EXYNOS_THD_TEMP_RISE 0x50 -#define EXYNOS_THD_TEMP_FALL 0x54 -#define EXYNOS_EMUL_CON 0x80 - -#define EXYNOS_TRIMINFO_RELOAD_ENABLE 1 -#define EXYNOS_TRIMINFO_25_SHIFT 0 -#define EXYNOS_TRIMINFO_85_SHIFT 8 -#define EXYNOS_TMU_TRIP_MODE_SHIFT 13 -#define EXYNOS_TMU_TRIP_MODE_MASK 0x7 -#define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12 - -#define EXYNOS_TMU_INTEN_RISE0_SHIFT 0 -#define EXYNOS_TMU_INTEN_RISE1_SHIFT 4 -#define EXYNOS_TMU_INTEN_RISE2_SHIFT 8 -#define EXYNOS_TMU_INTEN_RISE3_SHIFT 12 -#define EXYNOS_TMU_INTEN_FALL0_SHIFT 16 - -#define EXYNOS_EMUL_TIME 0x57F0 -#define EXYNOS_EMUL_TIME_MASK 0xffff -#define EXYNOS_EMUL_TIME_SHIFT 16 -#define EXYNOS_EMUL_DATA_SHIFT 8 -#define EXYNOS_EMUL_DATA_MASK 0xFF -#define EXYNOS_EMUL_ENABLE 0x1 - -#define EXYNOS_MAX_TRIGGER_PER_REG 4 - -/* Exynos5260 specific */ -#define EXYNOS5260_TMU_REG_INTEN 0xC0 -#define EXYNOS5260_TMU_REG_INTSTAT 0xC4 -#define EXYNOS5260_TMU_REG_INTCLEAR 0xC8 -#define EXYNOS5260_EMUL_CON 0x100 - -/* Exynos4412 specific */ -#define EXYNOS4412_MUX_ADDR_VALUE 6 -#define EXYNOS4412_MUX_ADDR_SHIFT 20 - -/*exynos5440 specific registers*/ -#define EXYNOS5440_TMU_S0_7_TRIM 0x000 -#define EXYNOS5440_TMU_S0_7_CTRL 0x020 -#define EXYNOS5440_TMU_S0_7_DEBUG 0x040 -#define EXYNOS5440_TMU_S0_7_STATUS 0x060 -#define EXYNOS5440_TMU_S0_7_TEMP 0x0f0 -#define EXYNOS5440_TMU_S0_7_TH0 0x110 -#define EXYNOS5440_TMU_S0_7_TH1 0x130 -#define EXYNOS5440_TMU_S0_7_TH2 0x150 -#define EXYNOS5440_TMU_S0_7_IRQEN 0x210 -#define EXYNOS5440_TMU_S0_7_IRQ 0x230 -/* exynos5440 common registers */ -#define EXYNOS5440_TMU_IRQ_STATUS 0x000 -#define EXYNOS5440_TMU_PMIN 0x004 - -#define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0 -#define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1 -#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2 -#define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3 -#define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4 -#define EXYNOS5440_TMU_TH_RISE4_SHIFT 24 -#define EXYNOS5440_EFUSE_SWAP_OFFSET 8 - -#if defined(CONFIG_SOC_EXYNOS3250) -extern struct exynos_tmu_init_data const exynos3250_default_tmu_data; -#define EXYNOS3250_TMU_DRV_DATA (&exynos3250_default_tmu_data) -#else -#define EXYNOS3250_TMU_DRV_DATA (NULL) -#endif - -#if defined(CONFIG_CPU_EXYNOS4210) -extern struct exynos_tmu_init_data const exynos4210_default_tmu_data; -#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data) -#else -#define EXYNOS4210_TMU_DRV_DATA (NULL) -#endif - -#if defined(CONFIG_SOC_EXYNOS4412) -extern struct exynos_tmu_init_data const exynos4412_default_tmu_data; -#define EXYNOS4412_TMU_DRV_DATA (&exynos4412_default_tmu_data) -#else -#define EXYNOS4412_TMU_DRV_DATA (NULL) -#endif - -#if defined(CONFIG_SOC_EXYNOS5250) -extern struct exynos_tmu_init_data const exynos5250_default_tmu_data; -#define EXYNOS5250_TMU_DRV_DATA (&exynos5250_default_tmu_data) -#else -#define EXYNOS5250_TMU_DRV_DATA (NULL) -#endif - -#if defined(CONFIG_SOC_EXYNOS5260) -extern struct exynos_tmu_init_data const exynos5260_default_tmu_data; -#define EXYNOS5260_TMU_DRV_DATA (&exynos5260_default_tmu_data) -#else -#define EXYNOS5260_TMU_DRV_DATA (NULL) -#endif - -#if defined(CONFIG_SOC_EXYNOS5420) -extern struct exynos_tmu_init_data const exynos5420_default_tmu_data; -#define EXYNOS5420_TMU_DRV_DATA (&exynos5420_default_tmu_data) -#else -#define EXYNOS5420_TMU_DRV_DATA (NULL) -#endif - -#if defined(CONFIG_SOC_EXYNOS5440) -extern struct exynos_tmu_init_data const exynos5440_default_tmu_data; -#define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data) -#else -#define EXYNOS5440_TMU_DRV_DATA (NULL) -#endif - -#endif /*_EXYNOS_TMU_DATA_H*/ diff --git a/drivers/thermal/tegra_soctherm.c b/drivers/thermal/tegra_soctherm.c new file mode 100644 index 000000000000..9197fc05c5cc --- /dev/null +++ b/drivers/thermal/tegra_soctherm.c @@ -0,0 +1,476 @@ +/* + * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved. + * + * Author: + * Mikko Perttunen <mperttunen@nvidia.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/reset.h> +#include <linux/thermal.h> + +#include <soc/tegra/fuse.h> + +#define SENSOR_CONFIG0 0 +#define SENSOR_CONFIG0_STOP BIT(0) +#define SENSOR_CONFIG0_TALL_SHIFT 8 +#define SENSOR_CONFIG0_TCALC_OVER BIT(4) +#define SENSOR_CONFIG0_OVER BIT(3) +#define SENSOR_CONFIG0_CPTR_OVER BIT(2) + +#define SENSOR_CONFIG1 4 +#define SENSOR_CONFIG1_TSAMPLE_SHIFT 0 +#define SENSOR_CONFIG1_TIDDQ_EN_SHIFT 15 +#define SENSOR_CONFIG1_TEN_COUNT_SHIFT 24 +#define SENSOR_CONFIG1_TEMP_ENABLE BIT(31) + +#define SENSOR_CONFIG2 8 +#define SENSOR_CONFIG2_THERMA_SHIFT 16 +#define SENSOR_CONFIG2_THERMB_SHIFT 0 + +#define SENSOR_PDIV 0x1c0 +#define SENSOR_PDIV_T124 0x8888 +#define SENSOR_HOTSPOT_OFF 0x1c4 +#define SENSOR_HOTSPOT_OFF_T124 0x00060600 +#define SENSOR_TEMP1 0x1c8 +#define SENSOR_TEMP2 0x1cc + +#define SENSOR_TEMP_MASK 0xffff +#define READBACK_VALUE_MASK 0xff00 +#define READBACK_VALUE_SHIFT 8 +#define READBACK_ADD_HALF BIT(7) +#define READBACK_NEGATE BIT(1) + +#define FUSE_TSENSOR8_CALIB 0x180 +#define FUSE_SPARE_REALIGNMENT_REG_0 0x1fc + +#define FUSE_TSENSOR_CALIB_CP_TS_BASE_MASK 0x1fff +#define FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK (0x1fff << 13) +#define FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT 13 + +#define FUSE_TSENSOR8_CALIB_CP_TS_BASE_MASK 0x3ff +#define FUSE_TSENSOR8_CALIB_FT_TS_BASE_MASK (0x7ff << 10) +#define FUSE_TSENSOR8_CALIB_FT_TS_BASE_SHIFT 10 + +#define FUSE_SPARE_REALIGNMENT_REG_SHIFT_CP_MASK 0x3f +#define FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_MASK (0x1f << 21) +#define FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_SHIFT 21 + +#define NOMINAL_CALIB_FT_T124 105 +#define NOMINAL_CALIB_CP_T124 25 + +struct tegra_tsensor_configuration { + u32 tall, tsample, tiddq_en, ten_count, pdiv, tsample_ate, pdiv_ate; +}; + +struct tegra_tsensor { + const struct tegra_tsensor_configuration *config; + u32 base, calib_fuse_offset; + /* Correction values used to modify values read from calibration fuses */ + s32 fuse_corr_alpha, fuse_corr_beta; +}; + +struct tegra_thermctl_zone { + void __iomem *reg; + unsigned int shift; +}; + +static const struct tegra_tsensor_configuration t124_tsensor_config = { + .tall = 16300, + .tsample = 120, + .tiddq_en = 1, + .ten_count = 1, + .pdiv = 8, + .tsample_ate = 480, + .pdiv_ate = 8 +}; + +static const struct tegra_tsensor t124_tsensors[] = { + { + .config = &t124_tsensor_config, + .base = 0xc0, + .calib_fuse_offset = 0x098, + .fuse_corr_alpha = 1135400, + .fuse_corr_beta = -6266900, + }, + { + .config = &t124_tsensor_config, + .base = 0xe0, + .calib_fuse_offset = 0x084, + .fuse_corr_alpha = 1122220, + .fuse_corr_beta = -5700700, + }, + { + .config = &t124_tsensor_config, + .base = 0x100, + .calib_fuse_offset = 0x088, + .fuse_corr_alpha = 1127000, + .fuse_corr_beta = -6768200, + }, + { + .config = &t124_tsensor_config, + .base = 0x120, + .calib_fuse_offset = 0x12c, + .fuse_corr_alpha = 1110900, + .fuse_corr_beta = -6232000, + }, + { + .config = &t124_tsensor_config, + .base = 0x140, + .calib_fuse_offset = 0x158, + .fuse_corr_alpha = 1122300, + .fuse_corr_beta = -5936400, + }, + { + .config = &t124_tsensor_config, + .base = 0x160, + .calib_fuse_offset = 0x15c, + .fuse_corr_alpha = 1145700, + .fuse_corr_beta = -7124600, + }, + { + .config = &t124_tsensor_config, + .base = 0x180, + .calib_fuse_offset = 0x154, + .fuse_corr_alpha = 1120100, + .fuse_corr_beta = -6000500, + }, + { + .config = &t124_tsensor_config, + .base = 0x1a0, + .calib_fuse_offset = 0x160, + .fuse_corr_alpha = 1106500, + .fuse_corr_beta = -6729300, + }, +}; + +struct tegra_soctherm { + struct reset_control *reset; + struct clk *clock_tsensor; + struct clk *clock_soctherm; + void __iomem *regs; + + struct thermal_zone_device *thermctl_tzs[4]; +}; + +struct tsensor_shared_calibration { + u32 base_cp, base_ft; + u32 actual_temp_cp, actual_temp_ft; +}; + +static int calculate_shared_calibration(struct tsensor_shared_calibration *r) +{ + u32 val, shifted_cp, shifted_ft; + int err; + + err = tegra_fuse_readl(FUSE_TSENSOR8_CALIB, &val); + if (err) + return err; + r->base_cp = val & FUSE_TSENSOR8_CALIB_CP_TS_BASE_MASK; + r->base_ft = (val & FUSE_TSENSOR8_CALIB_FT_TS_BASE_MASK) + >> FUSE_TSENSOR8_CALIB_FT_TS_BASE_SHIFT; + val = ((val & FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_MASK) + >> FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_SHIFT); + shifted_ft = sign_extend32(val, 4); + + err = tegra_fuse_readl(FUSE_SPARE_REALIGNMENT_REG_0, &val); + if (err) + return err; + shifted_cp = sign_extend32(val, 5); + + r->actual_temp_cp = 2 * NOMINAL_CALIB_CP_T124 + shifted_cp; + r->actual_temp_ft = 2 * NOMINAL_CALIB_FT_T124 + shifted_ft; + + return 0; +} + +static s64 div64_s64_precise(s64 a, s64 b) +{ + s64 r, al; + + /* Scale up for increased precision division */ + al = a << 16; + + r = div64_s64(al * 2 + 1, 2 * b); + return r >> 16; +} + +static int +calculate_tsensor_calibration(const struct tegra_tsensor *sensor, + const struct tsensor_shared_calibration *shared, + u32 *calib) +{ + u32 val; + s32 actual_tsensor_ft, actual_tsensor_cp, delta_sens, delta_temp, + mult, div; + s16 therma, thermb; + s64 tmp; + int err; + + err = tegra_fuse_readl(sensor->calib_fuse_offset, &val); + if (err) + return err; + + actual_tsensor_cp = (shared->base_cp * 64) + sign_extend32(val, 12); + val = (val & FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK) + >> FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT; + actual_tsensor_ft = (shared->base_ft * 32) + sign_extend32(val, 12); + + delta_sens = actual_tsensor_ft - actual_tsensor_cp; + delta_temp = shared->actual_temp_ft - shared->actual_temp_cp; + + mult = sensor->config->pdiv * sensor->config->tsample_ate; + div = sensor->config->tsample * sensor->config->pdiv_ate; + + therma = div64_s64_precise((s64) delta_temp * (1LL << 13) * mult, + (s64) delta_sens * div); + + tmp = (s64)actual_tsensor_ft * shared->actual_temp_cp - + (s64)actual_tsensor_cp * shared->actual_temp_ft; + thermb = div64_s64_precise(tmp, (s64)delta_sens); + + therma = div64_s64_precise((s64)therma * sensor->fuse_corr_alpha, + (s64)1000000LL); + thermb = div64_s64_precise((s64)thermb * sensor->fuse_corr_alpha + + sensor->fuse_corr_beta, (s64)1000000LL); + + *calib = ((u16)therma << SENSOR_CONFIG2_THERMA_SHIFT) | + ((u16)thermb << SENSOR_CONFIG2_THERMB_SHIFT); + + return 0; +} + +static int enable_tsensor(struct tegra_soctherm *tegra, + const struct tegra_tsensor *sensor, + const struct tsensor_shared_calibration *shared) +{ + void __iomem *base = tegra->regs + sensor->base; + unsigned int val; + u32 calib; + int err; + + err = calculate_tsensor_calibration(sensor, shared, &calib); + if (err) + return err; + + val = sensor->config->tall << SENSOR_CONFIG0_TALL_SHIFT; + writel(val, base + SENSOR_CONFIG0); + + val = (sensor->config->tsample - 1) << SENSOR_CONFIG1_TSAMPLE_SHIFT; + val |= sensor->config->tiddq_en << SENSOR_CONFIG1_TIDDQ_EN_SHIFT; + val |= sensor->config->ten_count << SENSOR_CONFIG1_TEN_COUNT_SHIFT; + val |= SENSOR_CONFIG1_TEMP_ENABLE; + writel(val, base + SENSOR_CONFIG1); + + writel(calib, base + SENSOR_CONFIG2); + + return 0; +} + +/* + * Translate from soctherm readback format to millicelsius. + * The soctherm readback format in bits is as follows: + * TTTTTTTT H______N + * where T's contain the temperature in Celsius, + * H denotes an addition of 0.5 Celsius and N denotes negation + * of the final value. + */ +static long translate_temp(u16 val) +{ + long t; + + t = ((val & READBACK_VALUE_MASK) >> READBACK_VALUE_SHIFT) * 1000; + if (val & READBACK_ADD_HALF) + t += 500; + if (val & READBACK_NEGATE) + t *= -1; + + return t; +} + +static int tegra_thermctl_get_temp(void *data, long *out_temp) +{ + struct tegra_thermctl_zone *zone = data; + u32 val; + + val = (readl(zone->reg) >> zone->shift) & SENSOR_TEMP_MASK; + *out_temp = translate_temp(val); + + return 0; +} + +static const struct thermal_zone_of_device_ops tegra_of_thermal_ops = { + .get_temp = tegra_thermctl_get_temp, +}; + +static const struct of_device_id tegra_soctherm_of_match[] = { + { .compatible = "nvidia,tegra124-soctherm" }, + { }, +}; +MODULE_DEVICE_TABLE(of, tegra_soctherm_of_match); + +struct thermctl_zone_desc { + unsigned int offset; + unsigned int shift; +}; + +static const struct thermctl_zone_desc t124_thermctl_temp_zones[] = { + { SENSOR_TEMP1, 16 }, + { SENSOR_TEMP2, 16 }, + { SENSOR_TEMP1, 0 }, + { SENSOR_TEMP2, 0 } +}; + +static int tegra_soctherm_probe(struct platform_device *pdev) +{ + struct tegra_soctherm *tegra; + struct thermal_zone_device *tz; + struct tsensor_shared_calibration shared_calib; + struct resource *res; + unsigned int i; + int err; + + const struct tegra_tsensor *tsensors = t124_tsensors; + + tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL); + if (!tegra) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + tegra->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(tegra->regs)) + return PTR_ERR(tegra->regs); + + tegra->reset = devm_reset_control_get(&pdev->dev, "soctherm"); + if (IS_ERR(tegra->reset)) { + dev_err(&pdev->dev, "can't get soctherm reset\n"); + return PTR_ERR(tegra->reset); + } + + tegra->clock_tsensor = devm_clk_get(&pdev->dev, "tsensor"); + if (IS_ERR(tegra->clock_tsensor)) { + dev_err(&pdev->dev, "can't get tsensor clock\n"); + return PTR_ERR(tegra->clock_tsensor); + } + + tegra->clock_soctherm = devm_clk_get(&pdev->dev, "soctherm"); + if (IS_ERR(tegra->clock_soctherm)) { + dev_err(&pdev->dev, "can't get soctherm clock\n"); + return PTR_ERR(tegra->clock_soctherm); + } + + reset_control_assert(tegra->reset); + + err = clk_prepare_enable(tegra->clock_soctherm); + if (err) + return err; + + err = clk_prepare_enable(tegra->clock_tsensor); + if (err) { + clk_disable_unprepare(tegra->clock_soctherm); + return err; + } + + reset_control_deassert(tegra->reset); + + /* Initialize raw sensors */ + + err = calculate_shared_calibration(&shared_calib); + if (err) + goto disable_clocks; + + for (i = 0; i < ARRAY_SIZE(t124_tsensors); ++i) { + err = enable_tsensor(tegra, tsensors + i, &shared_calib); + if (err) + goto disable_clocks; + } + + writel(SENSOR_PDIV_T124, tegra->regs + SENSOR_PDIV); + writel(SENSOR_HOTSPOT_OFF_T124, tegra->regs + SENSOR_HOTSPOT_OFF); + + /* Initialize thermctl sensors */ + + for (i = 0; i < ARRAY_SIZE(tegra->thermctl_tzs); ++i) { + struct tegra_thermctl_zone *zone = + devm_kzalloc(&pdev->dev, sizeof(*zone), GFP_KERNEL); + if (!zone) { + err = -ENOMEM; + goto unregister_tzs; + } + + zone->reg = tegra->regs + t124_thermctl_temp_zones[i].offset; + zone->shift = t124_thermctl_temp_zones[i].shift; + + tz = thermal_zone_of_sensor_register(&pdev->dev, i, zone, + &tegra_of_thermal_ops); + if (IS_ERR(tz)) { + err = PTR_ERR(tz); + dev_err(&pdev->dev, "failed to register sensor: %d\n", + err); + goto unregister_tzs; + } + + tegra->thermctl_tzs[i] = tz; + } + + return 0; + +unregister_tzs: + while (i--) + thermal_zone_of_sensor_unregister(&pdev->dev, + tegra->thermctl_tzs[i]); + +disable_clocks: + clk_disable_unprepare(tegra->clock_tsensor); + clk_disable_unprepare(tegra->clock_soctherm); + + return err; +} + +static int tegra_soctherm_remove(struct platform_device *pdev) +{ + struct tegra_soctherm *tegra = platform_get_drvdata(pdev); + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(tegra->thermctl_tzs); ++i) { + thermal_zone_of_sensor_unregister(&pdev->dev, + tegra->thermctl_tzs[i]); + } + + clk_disable_unprepare(tegra->clock_tsensor); + clk_disable_unprepare(tegra->clock_soctherm); + + return 0; +} + +static struct platform_driver tegra_soctherm_driver = { + .probe = tegra_soctherm_probe, + .remove = tegra_soctherm_remove, + .driver = { + .name = "tegra-soctherm", + .of_match_table = tegra_soctherm_of_match, + }, +}; +module_platform_driver(tegra_soctherm_driver); + +MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>"); +MODULE_DESCRIPTION("NVIDIA Tegra SOCTHERM thermal management driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h index d15d243de27a..9083e7520623 100644 --- a/drivers/thermal/thermal_core.h +++ b/drivers/thermal/thermal_core.h @@ -89,9 +89,27 @@ static inline void thermal_gov_user_space_unregister(void) {} #ifdef CONFIG_THERMAL_OF int of_parse_thermal_zones(void); void of_thermal_destroy_zones(void); +int of_thermal_get_ntrips(struct thermal_zone_device *); +bool of_thermal_is_trip_valid(struct thermal_zone_device *, int); +const struct thermal_trip * const +of_thermal_get_trip_points(struct thermal_zone_device *); #else static inline int of_parse_thermal_zones(void) { return 0; } static inline void of_thermal_destroy_zones(void) { } +static inline int of_thermal_get_ntrips(struct thermal_zone_device *tz) +{ + return 0; +} +static inline bool of_thermal_is_trip_valid(struct thermal_zone_device *tz, + int trip) +{ + return 0; +} +static inline const struct thermal_trip * const +of_thermal_get_trip_points(struct thermal_zone_device *tz) +{ + return NULL; +} #endif #endif /* __THERMAL_CORE_H__ */ diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index 9eec26dc0448..5fd03865e396 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -286,6 +286,11 @@ static int ti_thermal_get_crit_temp(struct thermal_zone_device *thermal, return ti_thermal_get_trip_temp(thermal, OMAP_TRIP_NUMBER - 1, temp); } +static const struct thermal_zone_of_device_ops ti_of_thermal_ops = { + .get_temp = __ti_thermal_get_temp, + .get_trend = __ti_thermal_get_trend, +}; + static struct thermal_zone_device_ops ti_thermal_ops = { .get_temp = ti_thermal_get_temp, .get_trend = ti_thermal_get_trend, @@ -333,8 +338,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, /* in case this is specified by DT */ data->ti_thermal = thermal_zone_of_sensor_register(bgp->dev, id, - data, __ti_thermal_get_temp, - __ti_thermal_get_trend); + data, &ti_of_thermal_ops); if (IS_ERR(data->ti_thermal)) { /* Create thermal zone */ data->ti_thermal = thermal_zone_device_register(domain, diff --git a/include/dt-bindings/thermal/tegra124-soctherm.h b/include/dt-bindings/thermal/tegra124-soctherm.h new file mode 100644 index 000000000000..85aaf66690f9 --- /dev/null +++ b/include/dt-bindings/thermal/tegra124-soctherm.h @@ -0,0 +1,13 @@ +/* + * This header provides constants for binding nvidia,tegra124-soctherm. + */ + +#ifndef _DT_BINDINGS_THERMAL_TEGRA124_SOCTHERM_H +#define _DT_BINDINGS_THERMAL_TEGRA124_SOCTHERM_H + +#define TEGRA124_SOCTHERM_SENSOR_CPU 0 +#define TEGRA124_SOCTHERM_SENSOR_MEM 1 +#define TEGRA124_SOCTHERM_SENSOR_GPU 2 +#define TEGRA124_SOCTHERM_SENSOR_PLLX 3 + +#endif diff --git a/include/linux/clock_cooling.h b/include/linux/clock_cooling.h new file mode 100644 index 000000000000..4d1019d56f7f --- /dev/null +++ b/include/linux/clock_cooling.h @@ -0,0 +1,65 @@ +/* + * linux/include/linux/clock_cooling.h + * + * Copyright (C) 2014 Eduardo Valentin <edubezval@gmail.com> + * + * Copyright (C) 2013 Texas Instruments Inc. + * Contact: Eduardo Valentin <eduardo.valentin@ti.com> + * + * Highly based on cpu_cooling.c. + * Copyright (C) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com) + * Copyright (C) 2012 Amit Daniel <amit.kachhap@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef __CPU_COOLING_H__ +#define __CPU_COOLING_H__ + +#include <linux/of.h> +#include <linux/thermal.h> +#include <linux/cpumask.h> + +#ifdef CONFIG_CLOCK_THERMAL +/** + * clock_cooling_register - function to create clock cooling device. + * @dev: struct device pointer to the device used as clock cooling device. + * @clock_name: string containing the clock used as cooling mechanism. + */ +struct thermal_cooling_device * +clock_cooling_register(struct device *dev, const char *clock_name); + +/** + * clock_cooling_unregister - function to remove clock cooling device. + * @cdev: thermal cooling device pointer. + */ +void clock_cooling_unregister(struct thermal_cooling_device *cdev); + +unsigned long clock_cooling_get_level(struct thermal_cooling_device *cdev, + unsigned long freq); +#else /* !CONFIG_CLOCK_THERMAL */ +static inline struct thermal_cooling_device * +clock_cooling_register(struct device *dev, const char *clock_name) +{ + return NULL; +} +static inline +void clock_cooling_unregister(struct thermal_cooling_device *cdev) +{ +} +static inline +unsigned long clock_cooling_get_level(struct thermal_cooling_device *cdev, + unsigned long freq) +{ + return THERMAL_CSTATE_INVALID; +} +#endif /* CONFIG_CLOCK_THERMAL */ + +#endif /* __CPU_COOLING_H__ */ diff --git a/include/linux/thermal.h b/include/linux/thermal.h index ef90838b36a0..99be7fc79c3b 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -289,19 +289,49 @@ struct thermal_genl_event { enum events event; }; +/** + * struct thermal_zone_of_device_ops - scallbacks for handling DT based zones + * + * Mandatory: + * @get_temp: a pointer to a function that reads the sensor temperature. + * + * Optional: + * @get_trend: a pointer to a function that reads the sensor temperature trend. + * @set_emul_temp: a pointer to a function that sets sensor emulated + * temperature. + */ +struct thermal_zone_of_device_ops { + int (*get_temp)(void *, long *); + int (*get_trend)(void *, long *); + int (*set_emul_temp)(void *, unsigned long); +}; + +/** + * struct thermal_trip - representation of a point in temperature domain + * @np: pointer to struct device_node that this trip point was created from + * @temperature: temperature value in miliCelsius + * @hysteresis: relative hysteresis in miliCelsius + * @type: trip point type + */ + +struct thermal_trip { + struct device_node *np; + unsigned long int temperature; + unsigned long int hysteresis; + enum thermal_trip_type type; +}; + /* Function declarations */ #ifdef CONFIG_THERMAL_OF struct thermal_zone_device * -thermal_zone_of_sensor_register(struct device *dev, int id, - void *data, int (*get_temp)(void *, long *), - int (*get_trend)(void *, long *)); +thermal_zone_of_sensor_register(struct device *dev, int id, void *data, + const struct thermal_zone_of_device_ops *ops); void thermal_zone_of_sensor_unregister(struct device *dev, struct thermal_zone_device *tz); #else static inline struct thermal_zone_device * -thermal_zone_of_sensor_register(struct device *dev, int id, - void *data, int (*get_temp)(void *, long *), - int (*get_trend)(void *, long *)) +thermal_zone_of_sensor_register(struct device *dev, int id, void *data, + const struct thermal_zone_of_device_ops *ops) { return NULL; } |