diff options
| -rw-r--r-- | Documentation/devicetree/bindings/input/touchscreen/ads7846.txt | 29 | ||||
| -rw-r--r-- | drivers/input/touchscreen/ads7846.c | 38 |
2 files changed, 51 insertions, 16 deletions
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt index ce540ddac902..81f6bda97d3c 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt @@ -32,7 +32,6 @@ Optional properties: (ADS7846). ti,keep-vref-on set to keep vref on for differential measurements as well - ti,swap-xy swap x and y axis ti,settle-delay-usec Settling time of the analog signals; a function of Vcc and the capacitance on the X/Y drivers. If set to non-zero, @@ -51,13 +50,6 @@ Optional properties: in Ohms (u16). ti,x-min Minimum value on the X axis (u16). ti,y-min Minimum value on the Y axis (u16). - ti,x-max Maximum value on the X axis (u16). - ti,y-max Maximum value on the Y axis (u16). - ti,pressure-min Minimum reported pressure value - (threshold) - u16. - ti,pressure-max Maximum reported pressure value (u16). - ti,debounce-max Max number of additional readings per - sample (u16). ti,debounce-tol Tolerance used for filtering (u16). ti,debounce-rep Additional consecutive good readings required after the first two (u16). @@ -67,7 +59,28 @@ Optional properties: line is connected to. wakeup-source use any event on touchscreen as wakeup event. (Legacy property support: "linux,wakeup") + touchscreen-size-x General touchscreen binding, see [1]. + touchscreen-size-y General touchscreen binding, see [1]. + touchscreen-max-pressure General touchscreen binding, see [1]. + touchscreen-min-pressure General touchscreen binding, see [1]. + touchscreen-average-samples General touchscreen binding, see [1]. + touchscreen-inverted-x General touchscreen binding, see [1]. + touchscreen-inverted-y General touchscreen binding, see [1]. + touchscreen-swapped-x-y General touchscreen binding, see [1]. + +[1] All general touchscreen properties are described in + Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt. +Deprecated properties: + + ti,swap-xy swap x and y axis + ti,x-max Maximum value on the X axis (u16). + ti,y-max Maximum value on the Y axis (u16). + ti,pressure-min Minimum reported pressure value + (threshold) - u16. + ti,pressure-max Maximum reported pressure value (u16). + ti,debounce-max Max number of additional readings per + sample (u16). Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC:: diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index accbbe8d2966..51ddb204ca1b 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -20,6 +20,7 @@ #include <linux/sched.h> #include <linux/delay.h> #include <linux/input.h> +#include <linux/input/touchscreen.h> #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/pm.h> @@ -129,6 +130,8 @@ struct ads7846 { u16 penirq_recheck_delay_usecs; + struct touchscreen_properties core_prop; + struct mutex lock; bool stopped; /* P: lock */ bool disabled; /* P: lock */ @@ -823,17 +826,13 @@ static void ads7846_report_state(struct ads7846 *ts) if (Rt) { struct input_dev *input = ts->input; - if (ts->swap_xy) - swap(x, y); - if (!ts->pendown) { input_report_key(input, BTN_TOUCH, 1); ts->pendown = true; dev_vdbg(&ts->spi->dev, "DOWN\n"); } - input_report_abs(input, ABS_X, x); - input_report_abs(input, ABS_Y, y); + touchscreen_report_pos(input, &ts->core_prop, x, y, false); input_report_abs(input, ABS_PRESSURE, ts->pressure_max - Rt); input_sync(input); @@ -1185,6 +1184,7 @@ static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev) struct ads7846_platform_data *pdata; struct device_node *node = dev->of_node; const struct of_device_id *match; + u32 value; if (!node) { dev_err(dev, "Device does not have associated DT data\n"); @@ -1223,10 +1223,18 @@ static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev) of_property_read_u16(node, "ti,x-max", &pdata->x_max); of_property_read_u16(node, "ti,y-max", &pdata->y_max); + /* + * touchscreen-max-pressure gets parsed during + * touchscreen_parse_properties() + */ of_property_read_u16(node, "ti,pressure-min", &pdata->pressure_min); + if (!of_property_read_u32(node, "touchscreen-min-pressure", &value)) + pdata->pressure_min = (u16) value; of_property_read_u16(node, "ti,pressure-max", &pdata->pressure_max); of_property_read_u16(node, "ti,debounce-max", &pdata->debounce_max); + if (!of_property_read_u32(node, "touchscreen-average-samples", &value)) + pdata->debounce_max = (u16) value; of_property_read_u16(node, "ti,debounce-tol", &pdata->debounce_tol); of_property_read_u16(node, "ti,debounce-rep", &pdata->debounce_rep); @@ -1309,10 +1317,7 @@ static int ads7846_probe(struct spi_device *spi) ts->model = pdata->model ? : 7846; ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100; ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; - ts->pressure_max = pdata->pressure_max ? : ~0; - ts->vref_mv = pdata->vref_mv; - ts->swap_xy = pdata->swap_xy; if (pdata->filter != NULL) { if (pdata->filter_init != NULL) { @@ -1364,6 +1369,23 @@ static int ads7846_probe(struct spi_device *spi) input_set_abs_params(input_dev, ABS_PRESSURE, pdata->pressure_min, pdata->pressure_max, 0, 0); + /* + * Parse common framework properties. Must be done here to ensure the + * correct behaviour in case of using the legacy vendor bindings. The + * general binding value overrides the vendor specific one. + */ + touchscreen_parse_properties(ts->input, false, &ts->core_prop); + ts->pressure_max = input_abs_get_max(input_dev, ABS_PRESSURE) ? : ~0; + + /* + * Check if legacy ti,swap-xy binding is used instead of + * touchscreen-swapped-x-y + */ + if (!ts->core_prop.swap_x_y && pdata->swap_xy) { + swap(input_dev->absinfo[ABS_X], input_dev->absinfo[ABS_Y]); + ts->core_prop.swap_x_y = true; + } + ads7846_setup_spi_msg(ts, pdata); ts->reg = regulator_get(&spi->dev, "vcc"); |