diff options
177 files changed, 10011 insertions, 1540 deletions
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 6c1e36c33faa..6015a92bc2a0 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -63,8 +63,7 @@ endif LDFLAGS_vmlinux := -Bstatic -# The -Iarch/$(ARCH)/include is temporary while we are merging -CPPFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH) -Iarch/$(ARCH)/include +CPPFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH) AFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH) CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=none -mcall-aixdesc CFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH) -ffixed-r2 -mmultiple @@ -72,9 +71,6 @@ CPPFLAGS += $(CPPFLAGS-y) AFLAGS += $(AFLAGS-y) CFLAGS += -msoft-float -pipe $(CFLAGS-y) CPP = $(CC) -E $(CFLAGS) -# Temporary hack until we have migrated to asm-powerpc -LINUXINCLUDE-$(CONFIG_PPC32) := -Iarch/$(ARCH)/include -LINUXINCLUDE += $(LINUXINCLUDE-y) CHECKFLAGS += -m$(SZ) -D__powerpc__ -D__powerpc$(SZ)__ @@ -123,7 +119,7 @@ CFLAGS += $(cpu-as-y) head-y := arch/powerpc/kernel/head_32.o head-$(CONFIG_PPC64) := arch/powerpc/kernel/head_64.o head-$(CONFIG_8xx) := arch/powerpc/kernel/head_8xx.o -head-$(CONFIG_4xx) := arch/powerpc/kernel/head_4xx.o +head-$(CONFIG_40x) := arch/powerpc/kernel/head_40x.o head-$(CONFIG_44x) := arch/powerpc/kernel/head_44x.o head-$(CONFIG_FSL_BOOKE) := arch/powerpc/kernel/head_fsl_booke.o @@ -172,19 +168,8 @@ install: archclean: $(Q)$(MAKE) $(clean)=$(boot) -archmrproper: - $(Q)rm -rf arch/$(ARCH)/include - archprepare: checkbin -ifeq ($(CONFIG_PPC32),y) -# Temporary hack until we have migrated to asm-powerpc -include/asm: arch/$(ARCH)/include/asm -arch/$(ARCH)/include/asm: FORCE - $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi - $(Q)ln -fsn $(srctree)/include/asm-$(OLDARCH) arch/$(ARCH)/include/asm -endif - # Use the file '.tmp_gas_check' for binutils tests, as gas won't output # to stdout and these checks are run even on install targets. TOUT := .tmp_gas_check diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore index eec7af7e5993..2c187ca05982 100644 --- a/arch/powerpc/boot/.gitignore +++ b/arch/powerpc/boot/.gitignore @@ -18,14 +18,14 @@ kernel-vmlinux.strip.c kernel-vmlinux.strip.gz mktree uImage -cuImage -cuImage.bin.gz -cuImage.elf +cuImage.* zImage +zImage.bin.* zImage.chrp zImage.coff zImage.coff.lds -zImage.lds +zImage.ep* +zImage.*lds zImage.miboot zImage.pmac zImage.pseries diff --git a/arch/powerpc/boot/44x.c b/arch/powerpc/boot/44x.c deleted file mode 100644 index 9f64e840bef6..000000000000 --- a/arch/powerpc/boot/44x.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright 2007 David Gibson, IBM Corporation. - * - * Based on earlier code: - * Matt Porter <mporter@kernel.crashing.org> - * Copyright 2002-2005 MontaVista Software Inc. - * - * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * Copyright (c) 2003, 2004 Zultys Technologies - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <stddef.h> -#include "types.h" -#include "string.h" -#include "stdio.h" -#include "ops.h" -#include "reg.h" -#include "dcr.h" - -/* Read the 44x memory controller to get size of system memory. */ -void ibm44x_fixup_memsize(void) -{ - int i; - unsigned long memsize, bank_config; - - memsize = 0; - for (i = 0; i < ARRAY_SIZE(sdram_bxcr); i++) { - mtdcr(DCRN_SDRAM0_CFGADDR, sdram_bxcr[i]); - bank_config = mfdcr(DCRN_SDRAM0_CFGDATA); - - if (bank_config & SDRAM_CONFIG_BANK_ENABLE) - memsize += SDRAM_CONFIG_BANK_SIZE(bank_config); - } - - dt_fixup_memory(0, memsize); -} - -#define SPRN_DBCR0 0x134 -#define DBCR0_RST_SYSTEM 0x30000000 - -void ibm44x_dbcr_reset(void) -{ - unsigned long tmp; - - asm volatile ( - "mfspr %0,%1\n" - "oris %0,%0,%2@h\n" - "mtspr %1,%0" - : "=&r"(tmp) : "i"(SPRN_DBCR0), "i"(DBCR0_RST_SYSTEM) - ); - -} - -/* Read 4xx EBC bus bridge registers to get mappings of the peripheral - * banks into the OPB address space */ -void ibm4xx_fixup_ebc_ranges(const char *ebc) -{ - void *devp; - u32 bxcr; - u32 ranges[EBC_NUM_BANKS*4]; - u32 *p = ranges; - int i; - - for (i = 0; i < EBC_NUM_BANKS; i++) { - mtdcr(DCRN_EBC0_CFGADDR, EBC_BXCR(i)); - bxcr = mfdcr(DCRN_EBC0_CFGDATA); - - if ((bxcr & EBC_BXCR_BU) != EBC_BXCR_BU_OFF) { - *p++ = i; - *p++ = 0; - *p++ = bxcr & EBC_BXCR_BAS; - *p++ = EBC_BXCR_BANK_SIZE(bxcr); - } - } - - devp = finddevice(ebc); - if (! devp) - fatal("Couldn't locate EBC node %s\n\r", ebc); - - setprop(devp, "ranges", ranges, (p - ranges) * sizeof(u32)); -} diff --git a/arch/powerpc/boot/44x.h b/arch/powerpc/boot/44x.h index 577982c9a3cd..ad33dcc95ae5 100644 --- a/arch/powerpc/boot/44x.h +++ b/arch/powerpc/boot/44x.h @@ -10,10 +10,7 @@ #ifndef _PPC_BOOT_44X_H_ #define _PPC_BOOT_44X_H_ -void ibm44x_fixup_memsize(void); -void ibm4xx_fixup_ebc_ranges(const char *ebc); - -void ibm44x_dbcr_reset(void); void ebony_init(void *mac0, void *mac1); +void bamboo_init(void); #endif /* _PPC_BOOT_44X_H_ */ diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c new file mode 100644 index 000000000000..ebf9e217612d --- /dev/null +++ b/arch/powerpc/boot/4xx.c @@ -0,0 +1,300 @@ +/* + * Copyright 2007 David Gibson, IBM Corporation. + * + * Based on earlier code: + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * Copyright (c) 2003, 2004 Zultys Technologies + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <stddef.h> +#include "types.h" +#include "string.h" +#include "stdio.h" +#include "ops.h" +#include "reg.h" +#include "dcr.h" + +/* Read the 4xx SDRAM controller to get size of system memory. */ +void ibm4xx_fixup_memsize(void) +{ + int i; + unsigned long memsize, bank_config; + + memsize = 0; + for (i = 0; i < ARRAY_SIZE(sdram_bxcr); i++) { + mtdcr(DCRN_SDRAM0_CFGADDR, sdram_bxcr[i]); + bank_config = mfdcr(DCRN_SDRAM0_CFGDATA); + + if (bank_config & SDRAM_CONFIG_BANK_ENABLE) + memsize += SDRAM_CONFIG_BANK_SIZE(bank_config); + } + + dt_fixup_memory(0, memsize); +} + +/* 4xx DDR1/2 Denali memory controller support */ +/* DDR0 registers */ +#define DDR0_02 2 +#define DDR0_08 8 +#define DDR0_10 10 +#define DDR0_14 14 +#define DDR0_42 42 +#define DDR0_43 43 + +/* DDR0_02 */ +#define DDR_START 0x1 +#define DDR_START_SHIFT 0 +#define DDR_MAX_CS_REG 0x3 +#define DDR_MAX_CS_REG_SHIFT 24 +#define DDR_MAX_COL_REG 0xf +#define DDR_MAX_COL_REG_SHIFT 16 +#define DDR_MAX_ROW_REG 0xf +#define DDR_MAX_ROW_REG_SHIFT 8 +/* DDR0_08 */ +#define DDR_DDR2_MODE 0x1 +#define DDR_DDR2_MODE_SHIFT 0 +/* DDR0_10 */ +#define DDR_CS_MAP 0x3 +#define DDR_CS_MAP_SHIFT 8 +/* DDR0_14 */ +#define DDR_REDUC 0x1 +#define DDR_REDUC_SHIFT 16 +/* DDR0_42 */ +#define DDR_APIN 0x7 +#define DDR_APIN_SHIFT 24 +/* DDR0_43 */ +#define DDR_COL_SZ 0x7 +#define DDR_COL_SZ_SHIFT 8 +#define DDR_BANK8 0x1 +#define DDR_BANK8_SHIFT 0 + +#define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask)) + +static inline u32 mfdcr_sdram0(u32 reg) +{ + mtdcr(DCRN_SDRAM0_CFGADDR, reg); + return mfdcr(DCRN_SDRAM0_CFGDATA); +} + +void ibm4xx_denali_fixup_memsize(void) +{ + u32 val, max_cs, max_col, max_row; + u32 cs, col, row, bank, dpath; + unsigned long memsize; + + val = mfdcr_sdram0(DDR0_02); + if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT)) + fatal("DDR controller is not initialized\n"); + + /* get maximum cs col and row values */ + max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT); + max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT); + max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT); + + /* get CS value */ + val = mfdcr_sdram0(DDR0_10); + + val = DDR_GET_VAL(val, DDR_CS_MAP, DDR_CS_MAP_SHIFT); + cs = 0; + while (val) { + if (val && 0x1) + cs++; + val = val >> 1; + } + + if (!cs) + fatal("No memory installed\n"); + if (cs > max_cs) + fatal("DDR wrong CS configuration\n"); + + /* get data path bytes */ + val = mfdcr_sdram0(DDR0_14); + + if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT)) + dpath = 8; /* 64 bits */ + else + dpath = 4; /* 32 bits */ + + /* get adress pins (rows) */ + val = mfdcr_sdram0(DDR0_42); + + row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT); + if (row > max_row) + fatal("DDR wrong APIN configuration\n"); + row = max_row - row; + + /* get collomn size and banks */ + val = mfdcr_sdram0(DDR0_43); + + col = DDR_GET_VAL(val, DDR_COL_SZ, DDR_COL_SZ_SHIFT); + if (col > max_col) + fatal("DDR wrong COL configuration\n"); + col = max_col - col; + + if (DDR_GET_VAL(val, DDR_BANK8, DDR_BANK8_SHIFT)) + bank = 8; /* 8 banks */ + else + bank = 4; /* 4 banks */ + + memsize = cs * (1 << (col+row)) * bank * dpath; + dt_fixup_memory(0, memsize); +} + +#define SPRN_DBCR0_40X 0x3F2 +#define SPRN_DBCR0_44X 0x134 +#define DBCR0_RST_SYSTEM 0x30000000 + +void ibm44x_dbcr_reset(void) +{ + unsigned long tmp; + + asm volatile ( + "mfspr %0,%1\n" + "oris %0,%0,%2@h\n" + "mtspr %1,%0" + : "=&r"(tmp) : "i"(SPRN_DBCR0_44X), "i"(DBCR0_RST_SYSTEM) + ); + +} + +void ibm40x_dbcr_reset(void) +{ + unsigned long tmp; + + asm volatile ( + "mfspr %0,%1\n" + "oris %0,%0,%2@h\n" + "mtspr %1,%0" + : "=&r"(tmp) : "i"(SPRN_DBCR0_40X), "i"(DBCR0_RST_SYSTEM) + ); +} + +#define EMAC_RESET 0x20000000 +void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1) +{ + /* Quiesce the MAL and EMAC(s) since PIBS/OpenBIOS don't do this for us */ + if (emac0) + *emac0 = EMAC_RESET; + if (emac1) + *emac1 = EMAC_RESET; + + mtdcr(DCRN_MAL0_CFG, MAL_RESET); +} + +/* Read 4xx EBC bus bridge registers to get mappings of the peripheral + * banks into the OPB address space */ +void ibm4xx_fixup_ebc_ranges(const char *ebc) +{ + void *devp; + u32 bxcr; + u32 ranges[EBC_NUM_BANKS*4]; + u32 *p = ranges; + int i; + + for (i = 0; i < EBC_NUM_BANKS; i++) { + mtdcr(DCRN_EBC0_CFGADDR, EBC_BXCR(i)); + bxcr = mfdcr(DCRN_EBC0_CFGDATA); + + if ((bxcr & EBC_BXCR_BU) != EBC_BXCR_BU_OFF) { + *p++ = i; + *p++ = 0; + *p++ = bxcr & EBC_BXCR_BAS; + *p++ = EBC_BXCR_BANK_SIZE(bxcr); + } + } + + devp = finddevice(ebc); + if (! devp) + fatal("Couldn't locate EBC node %s\n\r", ebc); + + setprop(devp, "ranges", ranges, (p - ranges) * sizeof(u32)); +} + +#define SPRN_CCR1 0x378 +void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk) +{ + u32 cpu, plb, opb, ebc, tb, uart0, m, vco; + u32 reg; + u32 fwdva, fwdvb, fbdv, lfbdv, opbdv0, perdv0, spcid0, prbdv0, tmp; + + mtdcr(DCRN_CPR0_ADDR, CPR0_PLLD0); + reg = mfdcr(DCRN_CPR0_DATA); + tmp = (reg & 0x000F0000) >> 16; + fwdva = tmp ? tmp : 16; + tmp = (reg & 0x00000700) >> 8; + fwdvb = tmp ? tmp : 8; + tmp = (reg & 0x1F000000) >> 24; + fbdv = tmp ? tmp : 32; + lfbdv = (reg & 0x0000007F); + + mtdcr(DCRN_CPR0_ADDR, CPR0_OPBD0); + reg = mfdcr(DCRN_CPR0_DATA); + tmp = (reg & 0x03000000) >> 24; + opbdv0 = tmp ? tmp : 4; + + mtdcr(DCRN_CPR0_ADDR, CPR0_PERD0); + reg = mfdcr(DCRN_CPR0_DATA); + tmp = (reg & 0x07000000) >> 24; + perdv0 = tmp ? tmp : 8; + + mtdcr(DCRN_CPR0_ADDR, CPR0_PRIMBD0); + reg = mfdcr(DCRN_CPR0_DATA); + tmp = (reg & 0x07000000) >> 24; + prbdv0 = tmp ? tmp : 8; + + mtdcr(DCRN_CPR0_ADDR, CPR0_SCPID); + reg = mfdcr(DCRN_CPR0_DATA); + tmp = (reg & 0x03000000) >> 24; + spcid0 = tmp ? tmp : 4; + + /* Calculate M */ + mtdcr(DCRN_CPR0_ADDR, CPR0_PLLC0); + reg = mfdcr(DCRN_CPR0_DATA); + tmp = (reg & 0x03000000) >> 24; + if (tmp == 0) { /* PLL output */ + tmp = (reg & 0x20000000) >> 29; + if (!tmp) /* PLLOUTA */ + m = fbdv * lfbdv * fwdva; + else + m = fbdv * lfbdv * fwdvb; + } + else if (tmp == 1) /* CPU output */ + m = fbdv * fwdva; + else + m = perdv0 * opbdv0 * fwdvb; + + vco = (m * sysclk) + (m >> 1); + cpu = vco / fwdva; + plb = vco / fwdvb / prbdv0; + opb = plb / opbdv0; + ebc = plb / perdv0; + + /* FIXME */ + uart0 = ser_clk; + + /* Figure out timebase. Either CPU or default TmrClk */ + asm volatile ( + "mfspr %0,%1\n" + : + "=&r"(reg) : "i"(SPRN_CCR1)); + if (reg & 0x0080) + tb = 25000000; /* TmrClk is 25MHz */ + else + tb = cpu; + + dt_fixup_cpu_clocks(cpu, tb, 0); + dt_fixup_clock("/plb", plb); + dt_fixup_clock("/plb/opb", opb); + dt_fixup_clock("/plb/opb/ebc", ebc); + dt_fixup_clock("/plb/opb/serial@ef600300", uart0); + dt_fixup_clock("/plb/opb/serial@ef600400", uart0); + dt_fixup_clock("/plb/opb/serial@ef600500", uart0); + dt_fixup_clock("/plb/opb/serial@ef600600", uart0); +} diff --git a/arch/powerpc/boot/4xx.h b/arch/powerpc/boot/4xx.h new file mode 100644 index 000000000000..adba6a599a93 --- /dev/null +++ b/arch/powerpc/boot/4xx.h @@ -0,0 +1,22 @@ +/* + * PowerPC 4xx related functions + * + * Copyright 2007 IBM Corporation. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#ifndef _POWERPC_BOOT_4XX_H_ +#define _POWERPC_BOOT_4XX_H_ + +void ibm4xx_fixup_memsize(void); +void ibm4xx_denali_fixup_memsize(void); +void ibm44x_dbcr_reset(void); +void ibm40x_dbcr_reset(void); +void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1); +void ibm4xx_fixup_ebc_ranges(const char *ebc); +void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk); + +#endif /* _POWERPC_BOOT_4XX_H_ */ diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 61a6f34ca5ed..fd16577a40d5 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -31,7 +31,7 @@ endif BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -$(obj)/44x.o: BOOTCFLAGS += -mcpu=440 +$(obj)/4xx.o: BOOTCFLAGS += -mcpu=440 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=440 zlib := inffast.c inflate.c inftrees.c @@ -44,10 +44,12 @@ $(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \ src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \ ns16550.c serial.c simple_alloc.c div64.S util.S \ gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \ - 44x.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c + 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \ + cpm-serial.c src-plat := of.c cuboot-83xx.c cuboot-85xx.c holly.c \ cuboot-ebony.c treeboot-ebony.c prpmc2800.c \ - ps3-head.S ps3-hvcall.S ps3.c + ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \ + cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) @@ -139,9 +141,14 @@ image-$(CONFIG_PPC_ISERIES) += zImage.iseries image-$(CONFIG_DEFAULT_UIMAGE) += uImage ifneq ($(CONFIG_DEVICE_TREE),"") +image-$(CONFIG_PPC_8xx) += cuImage.8xx +image-$(CONFIG_8260) += cuImage.pq2 image-$(CONFIG_PPC_83xx) += cuImage.83xx image-$(CONFIG_PPC_85xx) += cuImage.85xx image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony +image-$(CONFIG_BAMBOO) += treeImage.bamboo +image-$(CONFIG_SEQUOIA) += cuImage.sequoia +image-$(CONFIG_WALNUT) += treeImage.walnut endif # For 32-bit powermacs, build the COFF and miboot images diff --git a/arch/powerpc/boot/bamboo.c b/arch/powerpc/boot/bamboo.c new file mode 100644 index 000000000000..bc097694b445 --- /dev/null +++ b/arch/powerpc/boot/bamboo.c @@ -0,0 +1,45 @@ +/* + * Copyright IBM Corporation, 2007 + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * Based on ebony wrapper: + * Copyright 2007 David Gibson, IBM Corporation. + * + * Clocking code based on code by: + * Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 of the License + */ +#include <stdarg.h> +#include <stddef.h> +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" + +extern char _dtb_start[]; +extern char _dtb_end[]; + +static void bamboo_fixups(void) +{ + unsigned long sysclk = 33333333; + + ibm440ep_fixup_clocks(sysclk, 11059200); + ibm4xx_fixup_memsize(); + ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00); +} + +void bamboo_init(void) +{ + platform_ops.fixups = bamboo_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + ft_init(_dtb_start, 0, 32); + serial_console_init(); +} diff --git a/arch/powerpc/boot/cpm-serial.c b/arch/powerpc/boot/cpm-serial.c new file mode 100644 index 000000000000..fcb8b5e956bd --- /dev/null +++ b/arch/powerpc/boot/cpm-serial.c @@ -0,0 +1,249 @@ +/* + * CPM serial console support. + * + * Copyright 2007 Freescale Semiconductor, Inc. + * Author: Scott Wood <scottwood@freescale.com> + * + * It is assumed that the firmware (or the platform file) has already set + * up the port. + */ + +#include "types.h" +#include "io.h" +#include "ops.h" + +struct cpm_scc { + u32 gsmrl; + u32 gsmrh; + u16 psmr; + u8 res1[2]; + u16 todr; + u16 dsr; + u16 scce; + u8 res2[2]; + u16 sccm; + u8 res3; + u8 sccs; + u8 res4[8]; +}; + +struct cpm_smc { + u8 res1[2]; + u16 smcmr; + u8 res2[2]; + u8 smce; + u8 res3[3]; + u8 smcm; + u8 res4[5]; +}; + +struct cpm_param { + u16 rbase; + u16 tbase; + u8 rfcr; + u8 tfcr; +}; + +struct cpm_bd { + u16 sc; /* Status and Control */ + u16 len; /* Data length in buffer */ + u8 *addr; /* Buffer address in host memory */ +}; + +static void *cpcr; +static struct cpm_param *param; +static struct cpm_smc *smc; +static struct cpm_scc *scc; +struct cpm_bd *tbdf, *rbdf; +static u32 cpm_cmd; +static u8 *dpram_start; + +static void (*do_cmd)(int op); +static void (*enable_port)(void); +static void (*disable_port)(void); + +#define CPM_CMD_STOP_TX 4 +#define CPM_CMD_RESTART_TX 6 +#define CPM_CMD_INIT_RX_TX 0 + +static void cpm1_cmd(int op) +{ + while (in_be16(cpcr) & 1) + ; + + out_be16(cpcr, (op << 8) | cpm_cmd | 1); + + while (in_be16(cpcr) & 1) + ; +} + +static void cpm2_cmd(int op) +{ + while (in_be32(cpcr) & 0x10000) + ; + + out_be32(cpcr, op | cpm_cmd | 0x10000); + + while (in_be32(cpcr) & 0x10000) + ; +} + +static void smc_disable_port(void) +{ + do_cmd(CPM_CMD_STOP_TX); + out_be16(&smc->smcmr, in_be16(&smc->smcmr) & ~3); +} + +static void scc_disable_port(void) +{ + do_cmd(CPM_CMD_STOP_TX); + out_be32(&scc->gsmrl, in_be32(&scc->gsmrl) & ~0x30); +} + +static void smc_enable_port(void) +{ + out_be16(&smc->smcmr, in_be16(&smc->smcmr) | 3); + do_cmd(CPM_CMD_RESTART_TX); +} + +static void scc_enable_port(void) +{ + out_be32(&scc->gsmrl, in_be32(&scc->gsmrl) | 0x30); + do_cmd(CPM_CMD_RESTART_TX); +} + +static int cpm_serial_open(void) +{ + int dpaddr = 0x800; + disable_port(); + + out_8(¶m->rfcr, 0x10); + out_8(¶m->tfcr, 0x10); + + rbdf = (struct cpm_bd *)(dpram_start + dpaddr); + rbdf->addr = (u8 *)(rbdf + 2); + rbdf->sc = 0xa000; + rbdf->len = 1; + + tbdf = rbdf + 1; + tbdf->addr = (u8 *)(rbdf + 2) + 1; + tbdf->sc = 0x2000; + tbdf->len = 1; + + sync(); + out_be16(¶m->rbase, dpaddr); + out_be16(¶m->tbase, dpaddr + sizeof(struct cpm_bd)); + + do_cmd(CPM_CMD_INIT_RX_TX); + + enable_port(); + return 0; +} + +static void cpm_serial_putc(unsigned char c) +{ + while (tbdf->sc & 0x8000) + barrier(); + + sync(); + + tbdf->addr[0] = c; + eieio(); + tbdf->sc |= 0x8000; +} + +static unsigned char cpm_serial_tstc(void) +{ + barrier(); + return !(rbdf->sc & 0x8000); +} + +static unsigned char cpm_serial_getc(void) +{ + unsigned char c; + + while (!cpm_serial_tstc()) + ; + + sync(); + c = rbdf->addr[0]; + eieio(); + rbdf->sc |= 0x8000; + + return c; +} + +int cpm_console_init(void *devp, struct serial_console_data *scdp) +{ + void *reg_virt[2]; + int is_smc = 0, is_cpm2 = 0, n; + unsigned long reg_phys; + void *parent; + + if (dt_is_compatible(devp, "fsl,cpm1-smc-uart")) { + is_smc = 1; + } else if (dt_is_compatible(devp, "fsl,cpm2-scc-uart")) { + is_cpm2 = 1; + } else if (dt_is_compatible(devp, "fsl,cpm2-smc-uart")) { + is_cpm2 = 1; + is_smc = 1; + } + + if (is_smc) { + enable_port = smc_enable_port; + disable_port = smc_disable_port; + } else { + enable_port = scc_enable_port; + disable_port = scc_disable_port; + } + + if (is_cpm2) + do_cmd = cpm2_cmd; + else + do_cmd = cpm1_cmd; + + n = getprop(devp, "fsl,cpm-command", &cpm_cmd, 4); + if (n < 4) + return -1; + + n = getprop(devp, "virtual-reg", reg_virt, sizeof(reg_virt)); + if (n < (int)sizeof(reg_virt)) { + for (n = 0; n < 2; n++) { + if (!dt_xlate_reg(devp, n, ®_phys, NULL)) + return -1; + + reg_virt[n] = (void *)reg_phys; + } + } + + if (is_smc) + smc = reg_virt[0]; + else + scc = reg_virt[0]; + + param = reg_virt[1]; + + parent = get_parent(devp); + if (!parent) + return -1; + + n = getprop(parent, "virtual-reg", reg_virt, sizeof(reg_virt)); + if (n < (int)sizeof(reg_virt)) { + for (n = 0; n < 2; n++) { + if (!dt_xlate_reg(parent, n, ®_phys, NULL)) + return -1; + + reg_virt[n] = (void *)reg_phys; + } + } + + cpcr = reg_virt[0]; + dpram_start = reg_virt[1]; + + scdp->open = cpm_serial_open; + scdp->putc = cpm_serial_putc; + scdp->getc = cpm_serial_getc; + scdp->tstc = cpm_serial_tstc; + + return 0; +} diff --git a/arch/powerpc/boot/cuboot-83xx.c b/arch/powerpc/boot/cuboot-83xx.c index 296025d8b295..a0505509abcc 100644 --- a/arch/powerpc/boot/cuboot-83xx.c +++ b/arch/powerpc/boot/cuboot-83xx.c @@ -18,7 +18,6 @@ #include "ppcboot.h" static bd_t bd; -extern char _dtb_start[], _dtb_end[]; static void platform_fixups(void) { diff --git a/arch/powerpc/boot/cuboot-85xx.c b/arch/powerpc/boot/cuboot-85xx.c index 10f0f697c935..345dcbecef0f 100644 --- a/arch/powerpc/boot/cuboot-85xx.c +++ b/arch/powerpc/boot/cuboot-85xx.c @@ -18,7 +18,6 @@ #include "ppcboot.h" static bd_t bd; -extern char _dtb_start[], _dtb_end[]; static void platform_fixups(void) { diff --git a/arch/powerpc/boot/cuboot-8xx.c b/arch/powerpc/boot/cuboot-8xx.c new file mode 100644 index 000000000000..88ed84015a8b --- /dev/null +++ b/arch/powerpc/boot/cuboot-8xx.c @@ -0,0 +1,45 @@ +/* + * Old U-boot compatibility for 8xx + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" + +#define TARGET_8xx +#define TARGET_HAS_ETH1 +#include "ppcboot.h" + +static bd_t bd; + +static void platform_fixups(void) +{ + void *node; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 16, bd.bi_busfreq); + + node = finddevice("/soc/cpm"); + if (node) { + setprop(node, "clock-frequency", &bd.bi_busfreq, 4); + setprop(node, "fsl,brg-frequency", &bd.bi_busfreq, 4); + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/cuboot-pq2.c b/arch/powerpc/boot/cuboot-pq2.c new file mode 100644 index 000000000000..8021fd4a43bc --- /dev/null +++ b/arch/powerpc/boot/cuboot-pq2.c @@ -0,0 +1,283 @@ +/* + * Old U-boot compatibility for PowerQUICC II + * (a.k.a. 82xx with CPM, not the 8240 family of chips) + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" +#include "io.h" + +#define TARGET_CPM2 +#define TARGET_HAS_ETH1 +#include "ppcboot.h" + +static bd_t bd; + +struct cs_range { + u32 csnum; + u32 base; /* must be zero */ + u32 addr; + u32 size; +}; + +struct pci_range { + u32 flags; + u32 pci_addr[2]; + u32 phys_addr; + u32 size[2]; +}; + +struct cs_range cs_ranges_buf[MAX_PROP_LEN / sizeof(struct cs_range)]; +struct pci_range pci_ranges_buf[MAX_PROP_LEN / sizeof(struct pci_range)]; + +/* Different versions of u-boot put the BCSR in different places, and + * some don't set up the PCI PIC at all, so we assume the device tree is + * sane and update the BRx registers appropriately. + * + * For any node defined as compatible with fsl,pq2-chipselect, + * #address/#size must be 2/1 for chipselect bus, 1/1 for parent bus, + * and ranges must be for whole chip selects. + */ +static void update_cs_ranges(void) +{ + u32 ctrl_ph; + void *ctrl_node, *bus_node, *parent_node; + u32 *ctrl_addr; + unsigned long ctrl_size; + u32 naddr, nsize; + int len; + int i; + + bus_node = finddevice("/chipselect"); + if (!bus_node || !dt_is_compatible(bus_node, "fsl,pq2-chipselect")) + return; + + dt_get_reg_format(bus_node, &naddr, &nsize); + if (naddr != 2 || nsize != 1) + goto err; + + parent_node = get_parent(bus_node); + if (!parent_node) + goto err; + + dt_get_reg_format(parent_node, &naddr, &nsize); + if (naddr != 1 || nsize != 1) + goto err; + + len = getprop(bus_node, "fsl,ctrl", &ctrl_ph, 4); + if (len != 4) + goto err; + + ctrl_node = find_node_by_prop_value(NULL, "linux,phandle", + (char *)&ctrl_ph, 4); + if (!ctrl_node) + goto err; + + if (!dt_is_compatible(ctrl_node, "fsl,pq2-chipselect-ctrl")) + goto err; + + if (!dt_xlate_reg(ctrl_node, 0, (unsigned long *)&ctrl_addr, + &ctrl_size)) + goto err; + + len = getprop(bus_node, "ranges", cs_ranges_buf, sizeof(cs_ranges_buf)); + + for (i = 0; i < len / sizeof(struct cs_range); i++) { + u32 base, option; + int cs = cs_ranges_buf[i].csnum; + if (cs >= ctrl_size / 8) + goto err; + + if (cs_ranges_buf[i].base != 0) + goto err; + + base = in_be32(&ctrl_addr[cs * 2]); + + /* If CS is already valid, use the existing flags. + * Otherwise, guess a sane default. + */ + if (base & 1) { + base &= 0x7fff; + option = in_be32(&ctrl_addr[cs * 2 + 1]) & 0x7fff; + } else { + base = 0x1801; + option = 0x10; + } + + out_be32(&ctrl_addr[cs * 2], 0); + out_be32(&ctrl_addr[cs * 2 + 1], + option | ~(cs_ranges_buf[i].size - 1)); + out_be32(&ctrl_addr[cs * 2], base | cs_ranges_buf[i].addr); + } + + return; + +err: + printf("Bad /chipselect or fsl,pq2-chipselect-ctrl node\r\n"); +} + +/* Older u-boots don't set PCI up properly. Update the hardware to match + * the device tree. The prefetch mem region and non-prefetch mem region + * must be contiguous in the host bus. As required by the PCI binding, + * PCI #addr/#size must be 3/2. The parent bus must be 1/1. Only + * 32-bit PCI is supported. All three region types (prefetchable mem, + * non-prefetchable mem, and I/O) must be present. + */ +static void fixup_pci(void) +{ + struct pci_range *mem = NULL, *mmio = NULL, + *io = NULL, *mem_base = NULL; + u32 *pci_regs[3]; + u8 *soc_regs; + int i, len; + void *ctrl_node, *bus_node, *parent_node, *soc_node; + u32 naddr, nsize, bus_ph, mem_log2; + + ctrl_node = finddevice("/soc/pci"); + if (!ctrl_node || !dt_is_compatible(ctrl_node, "fsl,pq2-pci")) + return; + + soc_node = finddevice("/soc"); + if (!soc_node || !dt_is_compatible(soc_node, "fsl,pq2-soc")) + goto err; + + for (i = 0; i < 3; i++) + if (!dt_xlate_reg(ctrl_node, i, + (unsigned long *)&pci_regs[i], NULL)) + goto err; + + if (!dt_xlate_reg(soc_node, 0, (unsigned long *)&soc_regs, NULL)) + goto err; + + len = getprop(ctrl_node, "fsl,bus", &bus_ph, 4); + if (len != 4) + goto err; + + bus_node = find_node_by_prop_value(NULL, "linux,phandle", + (char *)&bus_ph, 4); + if (!bus_node) + goto err; + + dt_get_reg_format(bus_node, &naddr, &nsize); + if (naddr != 3 || nsize != 2) + goto err; + + parent_node = get_parent(bus_node); + if (!parent_node) + goto err; + + dt_get_reg_format(parent_node, &naddr, &nsize); + if (naddr != 1 || nsize != 1) + goto err; + + len = getprop(bus_node, "ranges", pci_ranges_buf, + sizeof(pci_ranges_buf)); + + for (i = 0; i < len / sizeof(struct pci_range); i++) { + u32 flags = pci_ranges_buf[i].flags & 0x43000000; + + if (flags == 0x42000000) + mem = &pci_ranges_buf[i]; + else if (flags == 0x02000000) + mmio = &pci_ranges_buf[i]; + else if (flags == 0x01000000) + io = &pci_ranges_buf[i]; + } + + if (!mem || !mmio || !io) + goto err; + + if (mem->phys_addr + mem->size[1] == mmio->phys_addr) + mem_base = mem; + else if (mmio->phys_addr + mmio->size[1] == mem->phys_addr) + mem_base = mmio; + else + goto err; + + out_be32(&pci_regs[1][0], mem_base->phys_addr | 1); + out_be32(&pci_regs[2][0], ~(mem->size[1] + mmio->size[1] - 1)); + + out_be32(&pci_regs[1][1], io->phys_addr | 1); + out_be32(&pci_regs[2][1], ~(io->size[1] - 1)); + + out_le32(&pci_regs[0][0], mem->pci_addr[1] >> 12); + out_le32(&pci_regs[0][2], mem->phys_addr >> 12); + out_le32(&pci_regs[0][4], (~(mem->size[1] - 1) >> 12) | 0xa0000000); + + out_le32(&pci_regs[0][6], mmio->pci_addr[1] >> 12); + out_le32(&pci_regs[0][8], mmio->phys_addr >> 12); + out_le32(&pci_regs[0][10], (~(mmio->size[1] - 1) >> 12) | 0x80000000); + + out_le32(&pci_regs[0][12], io->pci_addr[1] >> 12); + out_le32(&pci_regs[0][14], io->phys_addr >> 12); + out_le32(&pci_regs[0][16], (~(io->size[1] - 1) >> 12) | 0xc0000000); + + /* Inbound translation */ + out_le32(&pci_regs[0][58], 0); + out_le32(&pci_regs[0][60], 0); + + mem_log2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1); + out_le32(&pci_regs[0][62], 0xa0000000 | ~((1 << (mem_log2 - 12)) - 1)); + + /* If PCI is disabled, drive RST high to enable. */ + if (!(in_le32(&pci_regs[0][32]) & 1)) { + /* Tpvrh (Power valid to RST# high) 100 ms */ + udelay(100000); + + out_le32(&pci_regs[0][32], 1); + + /* Trhfa (RST# high to first cfg access) 2^25 clocks */ + udelay(1020000); + } + + /* Enable bus master and memory access */ + out_le32(&pci_regs[0][64], 0x80000004); + out_le32(&pci_regs[0][65], in_le32(&pci_regs[0][65]) | 6); + + /* Park the bus on PCI, and elevate PCI's arbitration priority, + * as required by section 9.6 of the user's manual. + */ + out_8(&soc_regs[0x10028], 3); + out_be32((u32 *)&soc_regs[0x1002c], 0x01236745); + + return; + +err: + printf("Bad PCI node\r\n"); +} + +static void pq2_platform_fixups(void) +{ + void *node; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq); + + node = finddevice("/soc/cpm"); + if (node) { + setprop(node, "clock-frequency", &bd.bi_cpmfreq, 4); + setprop(node, "fsl,brg-frequency", &bd.bi_brgfreq, 4); + } + + update_cs_ranges(); + fixup_pci(); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + serial_console_init(); + platform_ops.fixups = pq2_platform_fixups; +} diff --git a/arch/powerpc/boot/cuboot-sequoia.c b/arch/powerpc/boot/cuboot-sequoia.c new file mode 100644 index 000000000000..ec635e0bd4ec --- /dev/null +++ b/arch/powerpc/boot/cuboot-sequoia.c @@ -0,0 +1,56 @@ +/* + * Old U-boot compatibility for Sequoia + * + * Valentine Barshak <vbarshak@ru.mvista.com> + * Copyright 2007 MontaVista Software, Inc + * + * Based on Ebony code by David Gibson <david@gibson.dropbear.id.au> + * Copyright IBM Corporation, 2007 + * + * Based on Bamboo code by Josh Boyer <jwboyer@linux.vnet.ibm.com> + * Copyright IBM Corporation, 2007 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 of the License + */ + +#include <stdarg.h> +#include <stddef.h> +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + + +static void sequoia_fixups(void) +{ + unsigned long sysclk = 33333333; + + ibm440ep_fixup_clocks(sysclk, 11059200); + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); + ibm4xx_denali_fixup_memsize(); + dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + platform_ops.fixups = sequoia_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + ft_init(_dtb_start, 0, 32); + serial_console_init(); +} diff --git a/arch/powerpc/boot/cuboot.c b/arch/powerpc/boot/cuboot.c index 65795468ad6f..7768b2306b7a 100644 --- a/arch/powerpc/boot/cuboot.c +++ b/arch/powerpc/boot/cuboot.c @@ -17,9 +17,6 @@ #include "ppcboot.h" -extern char _end[]; -extern char _dtb_start[], _dtb_end[]; - void cuboot_init(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, unsigned long end_of_ram) diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h index 14b44aa96fea..83b88aa92888 100644 --- a/arch/powerpc/boot/dcr.h +++ b/arch/powerpc/boot/dcr.h @@ -121,4 +121,22 @@ static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, SDRAM0_B2C #define DCRN_CPC0_MIRQ1 0x0ed #define DCRN_CPC0_JTAGID 0x0ef +#define DCRN_MAL0_CFG 0x180 +#define MAL_RESET 0x80000000 + +/* 440EP Clock/Power-on Reset regs */ +#define DCRN_CPR0_ADDR 0xc +#define DCRN_CPR0_DATA 0xd +#define CPR0_PLLD0 0x60 +#define CPR0_OPBD0 0xc0 +#define CPR0_PERD0 0xe0 +#define CPR0_PRIMBD0 0xa0 +#define CPR0_SCPID 0x120 +#define CPR0_PLLC0 0x40 + +/* 405GP Clocking/Power Management/Chip Control regs */ +#define DCRN_CPC0_PLLMR 0xb0 +#define DCRN_405_CPC0_CR0 0xb1 +#define DCRN_405_CPC0_CR1 0xb2 + #endif /* _PPC_BOOT_DCR_H_ */ diff --git a/arch/powerpc/boot/devtree.c b/arch/powerpc/boot/devtree.c index c9951550ed2c..e1b8122b4393 100644 --- a/arch/powerpc/boot/devtree.c +++ b/arch/powerpc/boot/devtree.c @@ -74,6 +74,8 @@ void dt_fixup_cpu_clocks(u32 cpu, u32 tb, u32 bus) if (bus > 0) setprop_val(devp, "bus-frequency", bus); } + + timebase_period_ns = 1000000000 / tb; } void dt_fixup_clock(const char *path, u32 freq) @@ -111,9 +113,8 @@ void __dt_fixup_mac_addresses(u32 startindex, ...) } #define MAX_ADDR_CELLS 4 -#define MAX_RANGES 8 -static void get_reg_format(void *node, u32 *naddr, u32 *nsize) +void dt_get_reg_format(void *node, u32 *naddr, u32 *nsize) { if (getprop(node, "#address-cells", naddr, 4) != 4) *naddr = 2; @@ -207,7 +208,7 @@ static int find_range(u32 *reg, u32 *ranges, int nregaddr, * In particular, PCI is not supported. Also, only the beginning of the * reg block is tracked; size is ignored except in ranges. */ -static u32 dt_xlate_buf[MAX_ADDR_CELLS * MAX_RANGES * 3]; +static u32 prop_buf[MAX_PROP_LEN / 4]; static int dt_xlate(void *node, int res, int reglen, unsigned long *addr, unsigned long *size) @@ -216,14 +217,14 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr, u32 this_addr[MAX_ADDR_CELLS]; void *parent; u64 ret_addr, ret_size; - u32 naddr, nsize, prev_naddr; + u32 naddr, nsize, prev_naddr, prev_nsize; int buflen, offset; parent = get_parent(node); if (!parent) return 0; - get_reg_format(parent, &naddr, &nsize); + dt_get_reg_format(parent, &naddr, &nsize); if (nsize > 2) return 0; @@ -231,41 +232,47 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr, offset = (naddr + nsize) * res; if (reglen < offset + naddr + nsize || - sizeof(dt_xlate_buf) < offset + naddr + nsize) + MAX_PROP_LEN < (offset + naddr + nsize) * 4) return 0; - copy_val(last_addr, dt_xlate_buf + offset, naddr); + copy_val(last_addr, prop_buf + offset, naddr); - ret_size = dt_xlate_buf[offset + naddr]; + ret_size = prop_buf[offset + naddr]; if (nsize == 2) { ret_size <<= 32; - ret_size |= dt_xlate_buf[offset + naddr + 1]; + ret_size |= prop_buf[offset + naddr + 1]; } - while ((node = get_parent(node))) { + for (;;) { prev_naddr = naddr; + prev_nsize = nsize; + node = parent; + + parent = get_parent(node); + if (!parent) + break; - get_reg_format(node, &naddr, &nsize); + dt_get_reg_format(parent, &naddr, &nsize); - buflen = getprop(node, "ranges", dt_xlate_buf, - sizeof(dt_xlate_buf)); - if (buflen < 0) + buflen = getprop(node, "ranges", prop_buf, + sizeof(prop_buf)); + if (buflen == 0) continue; - if (buflen > sizeof(dt_xlate_buf)) + if (buflen < 0 || buflen > sizeof(prop_buf)) return 0; - offset = find_range(last_addr, dt_xlate_buf, prev_naddr, - naddr, nsize, buflen / 4); + offset = find_range(last_addr, prop_buf, prev_naddr, + naddr, prev_nsize, buflen / 4); if (offset < 0) return 0; - copy_val(this_addr, dt_xlate_buf + offset, prev_naddr); + copy_val(this_addr, prop_buf + offset, prev_naddr); if (!sub_reg(last_addr, this_addr)) return 0; - copy_val(this_addr, dt_xlate_buf + offset + prev_naddr, naddr); + copy_val(this_addr, prop_buf + offset + prev_naddr, naddr); if (!add_reg(last_addr, this_addr, naddr)) return 0; @@ -292,16 +299,35 @@ int dt_xlate_reg(void *node, int res, unsigned long *addr, unsigned long *size) { int reglen; - reglen = getprop(node, "reg", dt_xlate_buf, sizeof(dt_xlate_buf)) / 4; + reglen = getprop(node, "reg", prop_buf, sizeof(prop_buf)) / 4; return dt_xlate(node, res, reglen, addr, size); } int dt_xlate_addr(void *node, u32 *buf, int buflen, unsigned long *xlated_addr) { - if (buflen > sizeof(dt_xlate_buf)) + if (buflen > sizeof(prop_buf)) return 0; - memcpy(dt_xlate_buf, buf, buflen); + memcpy(prop_buf, buf, buflen); return dt_xlate(node, 0, buflen / 4, xlated_addr, NULL); } + +int dt_is_compatible(void *node, const char *compat) +{ + char *buf = (char *)prop_buf; + int len, pos; + + len = getprop(node, "compatible", buf, MAX_PROP_LEN); + if (len < 0) + return 0; + + for (pos = 0; pos < len; pos++) { + if (!strcmp(buf + pos, compat)) + return 1; + + pos += strnlen(&buf[pos], len - pos); + } + + return 0; +} diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts new file mode 100644 index 000000000000..bdd56b0e9460 --- /dev/null +++ b/arch/powerpc/boot/dts/bamboo.dts @@ -0,0 +1,244 @@ +/* + * Device Tree Source for AMCC Bamboo + * + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * FIXME: Draft only! + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,bamboo"; + compatible = "amcc,bamboo"; + dcr-parent = <&/cpus/PowerPC,440EP@0>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,440EP@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440ep"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440ep"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + DMA0: dma { + compatible = "ibm,dma-440ep", "ibm,dma-440gp"; + dcr-reg = <100 027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; + dcr-reg = <180 62>; + num-tx-chans = <4>; + num-rx-chans = <4>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 3 4>; + }; + + POB0: opb { + compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Bamboo is oddball in the 44x world and doesn't use the ERPN + * bits. + */ + ranges = <00000000 0 00000000 80000000 + 80000000 0 80000000 80000000>; + interrupt-parent = <&UIC1>; + interrupts = <7 4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + ranges; + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600500 8>; + virtual-reg = <ef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600600 8>; + virtual-reg = <ef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <4 4>; + }; + + IIC0: i2c@ef600700 { + device_type = "i2c"; + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <ef600700 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600800 { + device_type = "i2c"; + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <ef600800 14>; + interrupt-parent = <&UIC0>; + interrupts = <7 4>; + }; + + ZMII0: emac-zmii@ef600d00 { + device_type = "zmii-interface"; + compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; + reg = <ef600d00 c>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <1c 4 1d 4>; + reg = <ef600e00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <1e 4 1f 4>; + reg = <ef600f00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <2 3>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + bootargs = "console=ttyS0,115200"; + }; +}; diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts index c5f99613fc7b..37599bda5500 100644 --- a/arch/powerpc/boot/dts/ebony.dts +++ b/arch/powerpc/boot/dts/ebony.dts @@ -9,10 +9,6 @@ * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without * any warranty of any kind, whether express or implied. - * - * To build: - * dtc -I dts -O asm -o ebony.S -b 0 ebony.dts - * dtc -I dts -O dtb -o ebony.dtb -b 0 ebony.dts */ / { @@ -175,6 +171,7 @@ fpga@7,0 { compatible = "Ebony-FPGA"; reg = <7 0 10>; + virtual-reg = <e8300000>; }; }; diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts index 80a4fab8ee37..1a4d0beccc99 100644 --- a/arch/powerpc/boot/dts/holly.dts +++ b/arch/powerpc/boot/dts/holly.dts @@ -8,10 +8,6 @@ * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without * any warranty of any kind, whether express or implied. - * - * To build: - * dtc -I dts -O asm -o holly.S -b 0 holly.dts - * dtc -I dts -O dtb -o holly.dtb -b 0 holly.dts */ / { diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts index 122537419d9f..b0eeff036de3 100644 --- a/arch/powerpc/boot/dts/kuroboxHD.dts +++ b/arch/powerpc/boot/dts/kuroboxHD.dts @@ -15,9 +15,6 @@ XXXX add flash parts, rtc, ?? -build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" - - */ / { diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts index 579aa8b967d9..ccd15a231a10 100644 --- a/arch/powerpc/boot/dts/kuroboxHG.dts +++ b/arch/powerpc/boot/dts/kuroboxHG.dts @@ -15,9 +15,6 @@ XXXX add flash parts, rtc, ?? -build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" - - */ / { diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 1934b800278e..4d09dcad2537 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -10,207 +10,209 @@ */ / { - model = "MPC8272ADS"; - compatible = "MPC8260ADS"; - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8272@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <4000>; // L1, 16K - i-cache-size = <4000>; // L1, 16K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - 32-bit; - }; - }; - - pci_pic: interrupt-controller@f8200000 { - #address-cells = <0>; - #interrupt-cells = <2>; - interrupt-controller; - reg = <f8200000 f8200004>; - built-in; - device_type = "pci-pic"; - }; - memory { - device_type = "memory"; - reg = <00000000 4000000 f4500000 00000020>; - }; - - chosen { - name = "chosen"; - linux,platform = <0>; + model = "MPC8272ADS"; + compatible = "MPC8260ADS"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8272@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + 32-bit; + }; + }; + + pci_pic: interrupt-controller@f8200000 { + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + reg = <f8200000 f8200004>; + built-in; + device_type = "pci-pic"; + }; + + memory { + device_type = "memory"; + reg = <00000000 4000000 f4500000 00000020>; + }; + + chosen { + name = "chosen"; + linux,platform = <0>; interrupt-controller = <&Cpm_pic>; - }; - - soc8272@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "soc"; - ranges = <00000000 f0000000 00053000>; - reg = <f0000000 10000>; - - mdio@0 { - device_type = "mdio"; - compatible = "fs_enet"; - reg = <0 0>; - #address-cells = <1>; - #size-cells = <0>; + }; + + soc8272@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <00000000 f0000000 00053000>; + reg = <f0000000 10000>; + + mdio@0 { + device_type = "mdio"; + compatible = "fs_enet"; + reg = <0 0>; + #address-cells = <1>; + #size-cells = <0>; + phy0:ethernet-phy@0 { interrupt-parent = <&Cpm_pic>; - interrupts = <17 4>; - reg = <0>; - bitbang = [ 12 12 13 02 02 01 ]; - device_type = "ethernet-phy"; - }; + interrupts = <17 4>; + reg = <0>; + bitbang = [ 12 12 13 02 02 01 ]; + device_type = "ethernet-phy"; + }; + phy1:ethernet-phy@1 { interrupt-parent = <&Cpm_pic>; - interrupts = <17 4>; - bitbang = [ 12 12 13 02 02 01 ]; - reg = <3>; - device_type = "ethernet-phy"; - }; - }; - - ethernet@24000 { - #address-cells = <1>; - #size-cells = <0>; - device_type = "network"; - device-id = <1>; - compatible = "fs_enet"; - model = "FCC"; - reg = <11300 20 8400 100 11380 30>; - mac-address = [ 00 11 2F 99 43 54 ]; - interrupts = <20 2>; + interrupts = <17 4>; + bitbang = [ 12 12 13 02 02 01 ]; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + device-id = <1>; + compatible = "fs_enet"; + model = "FCC"; + reg = <11300 20 8400 100 11380 30>; + mac-address = [ 00 11 2F 99 43 54 ]; + interrupts = <20 2>; interrupt-parent = <&Cpm_pic>; phy-handle = <&Phy0>; - rx-clock = <13>; - tx-clock = <12>; - }; - - ethernet@25000 { - device_type = "network"; - device-id = <2>; - compatible = "fs_enet"; - model = "FCC"; - reg = <11320 20 8500 100 113b0 30>; - mac-address = [ 00 11 2F 99 44 54 ]; - interrupts = <21 2>; + rx-clock = <13>; + tx-clock = <12>; + }; + + ethernet@25000 { + device_type = "network"; + device-id = <2>; + compatible = "fs_enet"; + model = "FCC"; + reg = <11320 20 8500 100 113b0 30>; + mac-address = [ 00 11 2F 99 44 54 ]; + interrupts = <21 2>; interrupt-parent = <&Cpm_pic>; phy-handle = <&Phy1>; - rx-clock = <17>; - tx-clock = <18>; - }; - - cpm@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "cpm"; - model = "CPM2"; - ranges = <00000000 00000000 20000>; - reg = <0 20000>; - command-proc = <119c0>; - brg-frequency = <17D7840>; - cpm_clk = <BEBC200>; - - scc@11a00 { - device_type = "serial"; - compatible = "cpm_uart"; - model = "SCC"; - device-id = <1>; - reg = <11a00 20 8000 100>; - current-speed = <1c200>; - interrupts = <28 2>; + rx-clock = <17>; + tx-clock = <18>; + }; + + cpm@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "cpm"; + model = "CPM2"; + ranges = <00000000 00000000 20000>; + reg = <0 20000>; + command-proc = <119c0>; + brg-frequency = <17D7840>; + cpm_clk = <BEBC200>; + + scc@11a00 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SCC"; + device-id = <1>; + reg = <11a00 20 8000 100>; + current-speed = <1c200>; + interrupts = <28 2>; interrupt-parent = <&Cpm_pic>; - clock-setup = <0 00ffffff>; - rx-clock = <1>; - tx-clock = <1>; - }; - - scc@11a60 { - device_type = "serial"; - compatible = "cpm_uart"; - model = "SCC"; - device-id = <4>; - reg = <11a60 20 8300 100>; - current-speed = <1c200>; - interrupts = <2b 2>; + clock-setup = <0 00ffffff>; + rx-clock = <1>; + tx-clock = <1>; + }; + + scc@11a60 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SCC"; + device-id = <4>; + reg = <11a60 20 8300 100>; + current-speed = <1c200>; + interrupts = <2b 2>; interrupt-parent = <&Cpm_pic>; - clock-setup = <1b ffffff00>; - rx-clock = <4>; - tx-clock = <4>; - }; - - }; - cpm_pic:interrupt-controller@10c00 { - #address-cells = <0>; - #interrupt-cells = <2>; - interrupt-controller; - reg = <10c00 80>; - built-in; - device_type = "cpm-pic"; - compatible = "CPM2"; - }; - pci@0500 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "8272"; - device_type = "pci"; - reg = <10430 4dc>; - clock-frequency = <3f940aa>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x16 */ - b000 0 0 1 f8200000 40 8 - b000 0 0 2 f8200000 41 8 - b000 0 0 3 f8200000 42 8 - b000 0 0 4 f8200000 43 8 - - /* IDSEL 0x17 */ - b800 0 0 1 f8200000 43 8 - b800 0 0 2 f8200000 40 8 - b800 0 0 3 f8200000 41 8 - b800 0 0 4 f8200000 42 8 - - /* IDSEL 0x18 */ - c000 0 0 1 f8200000 42 8 - c000 0 0 2 f8200000 43 8 - c000 0 0 3 f8200000 40 8 - c000 0 0 4 f8200000 41 8>; + clock-setup = <1b ffffff00>; + rx-clock = <4>; + tx-clock = <4>; + }; + }; + + cpm_pic:interrupt-controller@10c00 { + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + reg = <10c00 80>; + built-in; + device_type = "cpm-pic"; + compatible = "CPM2"; + }; + + pci@0500 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "8272"; + device_type = "pci"; + reg = <10430 4dc>; + clock-frequency = <3f940aa>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x16 */ + b000 0 0 1 f8200000 40 8 + b000 0 0 2 f8200000 41 8 + b000 0 0 3 f8200000 42 8 + b000 0 0 4 f8200000 43 8 + + /* IDSEL 0x17 */ + b800 0 0 1 f8200000 43 8 + b800 0 0 2 f8200000 40 8 + b800 0 0 3 f8200000 41 8 + b800 0 0 4 f8200000 42 8 + + /* IDSEL 0x18 */ + c000 0 0 1 f8200000 42 8 + c000 0 0 2 f8200000 43 8 + c000 0 0 3 f8200000 40 8 + c000 0 0 4 f8200000 41 8>; interrupt-parent = <&Cpm_pic>; - interrupts = <14 8>; - bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 40000000 - 01000000 0 00000000 f6000000 0 02000000>; - }; + interrupts = <14 8>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 40000000 + 01000000 0 00000000 f6000000 0 02000000>; + }; /* May need to remove if on a part without crypto engine */ - crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; - reg = <30000 10000>; - interrupts = <b 2>; + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 10000>; + interrupts = <b 2>; interrupt-parent = <&Cpm_pic>; - num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <0000007e>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <0000007e>; /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ - descriptor-types-mask = <01010ebf>; - }; - - }; + descriptor-types-mask = <01010ebf>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts index 5300b50cdc2f..e416ea67be49 100644 --- a/arch/powerpc/boot/dts/prpmc2800.dts +++ b/arch/powerpc/boot/dts/prpmc2800.dts @@ -9,10 +9,6 @@ * * Property values that are labeled as "Default" will be updated by bootwrapper * if it can determine the exact PrPMC type. - * - * To build: - * dtc -I dts -O asm -o prpmc2800.S -b 0 prpmc2800.dts - * dtc -I dts -O dtb -o prpmc2800.dtb -b 0 prpmc2800.dts */ / { diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts new file mode 100644 index 000000000000..af6a56b4e5b1 --- /dev/null +++ b/arch/powerpc/boot/dts/sequoia.dts @@ -0,0 +1,286 @@ +/* + * Device Tree Source for AMCC Sequoia + * + * Based on Bamboo code by Josh Boyer <jwboyer@linux.vnet.ibm.com> + * Copyright (c) 2006, 2007 IBM Corp. + * + * FIXME: Draft only! + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,sequoia"; + compatible = "amcc,sequoia"; + dcr-parent = <&/cpus/PowerPC,440EPx@0>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,440EPx@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440epx","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440epx","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440epx","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0e0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1c 4 1d 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440epx", "ibm,sdr-440ep"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440epx", "ibm,cpr-440ep"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-440epx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + device_type = "memory-controller"; + compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali"; + dcr-reg = <010 2>; + }; + + DMA0: dma { + compatible = "ibm,dma-440epx", "ibm,dma-4xx"; + dcr-reg = <100 027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440epx", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <4>; + num-rx-chans = <4>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 2 4>; + interrupt-map-mask = <ffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-440epx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <00000000 1 00000000 80000000 + 80000000 1 80000000 80000000>; + interrupt-parent = <&UIC1>; + interrupts = <7 4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440epx", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + device_type = "rom"; + compatible = "direct-mapped"; + probe-type = "CFI"; + bank-width = <2>; + partitions = < 0 180000 + 180000 200000 + 380000 3aa0000 + 3e20000 140000 + 3f60000 40000 + 3fa0000 60000>; + partition-names = "Kernel", "ramdisk", "file system", + "kozio", "env", "u-boot"; + reg = <0 000000 4000000>; + }; + + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600500 8>; + virtual-reg = <ef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <3 4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600600 8>; + virtual-reg = <ef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <4 4>; + }; + + IIC0: i2c@ef600700 { + device_type = "i2c"; + compatible = "ibm,iic-440epx", "ibm,iic"; + reg = <ef600700 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600800 { + device_type = "i2c"; + compatible = "ibm,iic-440epx", "ibm,iic"; + reg = <ef600800 14>; + interrupt-parent = <&UIC0>; + interrupts = <7 4>; + }; + + ZMII0: emac-zmii@ef600d00 { + device_type = "zmii-interface"; + compatible = "ibm,zmii-440epx", "ibm,zmii"; + reg = <ef600d00 c>; + }; + + EMAC0: ethernet@ef600e00 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-440epx", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC0 18 4 + /*Wake*/ 1 &UIC1 1d 4>; + reg = <ef600e00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + EMAC1: ethernet@ef600f00 { + linux,network-index = <1>; + device_type = "network"; + compatible = "ibm,emac-440epx", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC0 19 4 + /*Wake*/ 1 &UIC1 1f 4>; + reg = <ef600f00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <2 3>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + bootargs = "console=ttyS0,115200"; + }; +}; diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts new file mode 100644 index 000000000000..27bef06db134 --- /dev/null +++ b/arch/powerpc/boot/dts/walnut.dts @@ -0,0 +1,183 @@ +/* + * Device Tree Source for IBM Walnut + * + * Copyright 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "ibm,walnut"; + compatible = "ibm,walnut"; + dcr-parent = <&/cpus/PowerPC,405GP@0>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,405GP@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <bebc200>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <4000>; + d-cache-size = <4000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 9>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + plb { + compatible = "ibm,plb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + MAL: mcmal { + compatible = "ibm,mcmal-405gp", "ibm,mcmal"; + dcr-reg = <180 62>; + num-tx-chans = <2>; + num-rx-chans = <1>; + interrupt-parent = <&UIC0>; + interrupts = <a 4 b 4 c 4 d 4 e 4>; + }; + + POB0: opb { + compatible = "ibm,opb-405gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <ef600000 ef600000 a00000>; + dcr-reg = <0a0 5>; + clock-frequency = <0>; /* Filled in by zImage */ + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <2580>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <2580>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + IIC: i2c@ef600500 { + compatible = "ibm,iic-405gp", "ibm,iic"; + reg = <ef600500 11>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + GPIO: gpio@ef600700 { + compatible = "ibm,gpio-405gp"; + reg = <ef600700 20>; + }; + + EMAC: ethernet@ef600800 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-405gp", "ibm,emac"; + interrupt-parent = <&UIC0>; + interrupts = <9 4 f 4>; + reg = <ef600800 70>; + mal-device = <&MAL>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000001>; + }; + + }; + + EBC0: ebc { + compatible = "ibm,ebc-405gp", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + + sram@0,0 { + reg = <0 0 80000>; + }; + + flash@0,80000 { + device_type = "rom"; + compatible = "direct-mapped"; + probe-type = "JEDEC"; + bank-width = <1>; + partitions = <0 80000>; + partition-names = "OpenBIOS"; + reg = <0 80000 80000>; + }; + + ds1743@1,0 { + /* NVRAM and RTC */ + compatible = "ds1743"; + reg = <1 0 2000>; + }; + + keyboard@2,0 { + compatible = "intel,82C42PC"; + reg = <2 0 2>; + }; + + ir@3,0 { + compatible = "ti,TIR2000PAG"; + reg = <3 0 10>; + }; + + fpga@7,0 { + compatible = "Walnut-FPGA"; + reg = <7 0 10>; + virtual-reg = <f0300005>; + }; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/ebony.c b/arch/powerpc/boot/ebony.c index 75daedafd0a4..86c0f5df0a86 100644 --- a/arch/powerpc/boot/ebony.c +++ b/arch/powerpc/boot/ebony.c @@ -24,12 +24,11 @@ #include "page.h" #include "ops.h" #include "reg.h" +#include "io.h" #include "dcr.h" +#include "4xx.h" #include "44x.h" -extern char _dtb_start[]; -extern char _dtb_end[]; - static u8 *ebony_mac0, *ebony_mac1; /* Calculate 440GP clocks */ @@ -92,15 +91,53 @@ void ibm440gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk) dt_fixup_clock("/plb/opb/serial@40000300", uart1); } +#define EBONY_FPGA_PATH "/plb/opb/ebc/fpga" +#define EBONY_FPGA_FLASH_SEL 0x01 +#define EBONY_SMALL_FLASH_PATH "/plb/opb/ebc/small-flash" + +static void ebony_flashsel_fixup(void) +{ + void *devp; + u32 reg[3] = {0x0, 0x0, 0x80000}; + u8 *fpga; + u8 fpga_reg0 = 0x0; + + devp = finddevice(EBONY_FPGA_PATH); + if (!devp) + fatal("Couldn't locate FPGA node %s\n\r", EBONY_FPGA_PATH); + + if (getprop(devp, "virtual-reg", &fpga, sizeof(fpga)) != sizeof(fpga)) + fatal("%s has missing or invalid virtual-reg property\n\r", + EBONY_FPGA_PATH); + + fpga_reg0 = in_8(fpga); + + devp = finddevice(EBONY_SMALL_FLASH_PATH); + if (!devp) + fatal("Couldn't locate small flash node %s\n\r", + EBONY_SMALL_FLASH_PATH); + + if (getprop(devp, "reg", reg, sizeof(reg)) != sizeof(reg)) + fatal("%s has reg property of unexpected size\n\r", + EBONY_SMALL_FLASH_PATH); + + /* Invert address bit 14 (IBM-endian) if FLASH_SEL fpga bit is set */ + if (fpga_reg0 & EBONY_FPGA_FLASH_SEL) + reg[1] ^= 0x80000; + + setprop(devp, "reg", reg, sizeof(reg)); +} + static void ebony_fixups(void) { // FIXME: sysclk should be derived by reading the FPGA registers unsigned long sysclk = 33000000; ibm440gp_fixup_clocks(sysclk, 6 * 1843200); - ibm44x_fixup_memsize(); + ibm4xx_fixup_memsize(); dt_fixup_mac_addresses(ebony_mac0, ebony_mac1); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); + ebony_flashsel_fixup(); } void ebony_init(void *mac0, void *mac1) diff --git a/arch/powerpc/boot/holly.c b/arch/powerpc/boot/holly.c index 7d6539f5e22c..199e783aea4d 100644 --- a/arch/powerpc/boot/holly.c +++ b/arch/powerpc/boot/holly.c @@ -21,11 +21,6 @@ #include "ops.h" #include "io.h" -extern char _start[]; -extern char _end[]; -extern char _dtb_start[]; -extern char _dtb_end[]; - BSS_STACK(4096); void platform_init(unsigned long r3, unsigned long r4, unsigned long r5) diff --git a/arch/powerpc/boot/io.h b/arch/powerpc/boot/io.h index 32974ed49e02..ccaedaec50d5 100644 --- a/arch/powerpc/boot/io.h +++ b/arch/powerpc/boot/io.h @@ -1,5 +1,8 @@ #ifndef _IO_H #define __IO_H + +#include "types.h" + /* * Low-level I/O routines. * @@ -20,6 +23,37 @@ static inline void out_8(volatile unsigned char *addr, int val) : "=m" (*addr) : "r" (val)); } +static inline unsigned in_le16(const volatile u16 *addr) +{ + unsigned ret; + + __asm__ __volatile__("lhbrx %0,0,%1; twi 0,%0,0; isync" + : "=r" (ret) : "r" (addr), "m" (*addr)); + + return ret; +} + +static inline unsigned in_be16(const volatile u16 *addr) +{ + unsigned ret; + + __asm__ __volatile__("lhz%U1%X1 %0,%1; twi 0,%0,0; isync" + : "=r" (ret) : "m" (*addr)); + return ret; +} + +static inline void out_le16(volatile u16 *addr, int val) +{ + __asm__ __volatile__("sthbrx %1,0,%2; sync" : "=m" (*addr) + : "r" (val), "r" (addr)); +} + +static inline void out_be16(volatile u16 *addr, int val) +{ + __asm__ __volatile__("sth%U0%X0 %1,%0; sync" + : "=m" (*addr) : "r" (val)); +} + static inline unsigned in_le32(const volatile unsigned *addr) { unsigned ret; @@ -50,4 +84,19 @@ static inline void out_be32(volatile unsigned *addr, int val) : "=m" (*addr) : "r" (val)); } +static inline void sync(void) +{ + asm volatile("sync" : : : "memory"); +} + +static inline void eieio(void) +{ + asm volatile("eieio" : : : "memory"); +} + +static inline void barrier(void) +{ + asm volatile("" : : : "memory"); +} + #endif /* _IO_H */ diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c index 416dc3857bfe..1b496b37eca0 100644 --- a/arch/powerpc/boot/main.c +++ b/arch/powerpc/boot/main.c @@ -19,16 +19,6 @@ #include "flatdevtree.h" #include "reg.h" -extern char _start[]; -extern char __bss_start[]; -extern char _end[]; -extern char _vmlinux_start[]; -extern char _vmlinux_end[]; -extern char _initrd_start[]; -extern char _initrd_end[]; -extern char _dtb_start[]; -extern char _dtb_end[]; - static struct gunzip_state gzstate; struct addr_range { diff --git a/arch/powerpc/boot/mpsc.c b/arch/powerpc/boot/mpsc.c index f1c0e965e5ce..802ea53790d8 100644 --- a/arch/powerpc/boot/mpsc.c +++ b/arch/powerpc/boot/mpsc.c @@ -17,7 +17,6 @@ #include "io.h" #include "ops.h" -extern void udelay(long delay); #define MPSC_CHR_1 0x000c diff --git a/arch/powerpc/boot/mv64x60_i2c.c b/arch/powerpc/boot/mv64x60_i2c.c index 435fe8528680..d085377be3bc 100644 --- a/arch/powerpc/boot/mv64x60_i2c.c +++ b/arch/powerpc/boot/mv64x60_i2c.c @@ -21,8 +21,6 @@ #include "ops.h" #include "mv64x60.h" -extern void udelay(long); - /* Register defines */ #define MV64x60_I2C_REG_SLAVE_ADDR 0x00 #define MV64x60_I2C_REG_DATA 0x04 diff --git a/arch/powerpc/boot/of.c b/arch/powerpc/boot/of.c index 385e08b83b7e..61d9899aa0d0 100644 --- a/arch/powerpc/boot/of.c +++ b/arch/powerpc/boot/of.c @@ -17,8 +17,6 @@ #include "of.h" -extern char _end[]; - /* Value picked to match that used by yaboot */ #define PROG_START 0x01400000 /* only used on 64-bit systems */ #define RAM_END (512<<20) /* Fixme: use OF */ diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h index 86077066cd7c..45c2268d5c56 100644 --- a/arch/powerpc/boot/ops.h +++ b/arch/powerpc/boot/ops.h @@ -82,11 +82,14 @@ int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device); int serial_console_init(void); int ns16550_console_init(void *devp, struct serial_console_data *scdp); int mpsc_console_init(void *devp, struct serial_console_data *scdp); +int cpm_console_init(void *devp, struct serial_console_data *scdp); void *simple_alloc_init(char *base, unsigned long heap_size, unsigned long granularity, unsigned long max_allocs); extern void flush_cache(void *, unsigned long); int dt_xlate_reg(void *node, int res, unsigned long *addr, unsigned long *size); int dt_xlate_addr(void *node, u32 *buf, int buflen, unsigned long *xlated_addr); +int dt_is_compatible(void *node, const char *compat); +void dt_get_reg_format(void *node, u32 *naddr, u32 *nsize); static inline void *finddevice(const char *name) { @@ -191,4 +194,25 @@ static inline void exit(void) static char _bss_stack[size]; \ void *_platform_stack_top = _bss_stack + sizeof(_bss_stack); +extern unsigned long timebase_period_ns; +void udelay(long delay); + +extern char _start[]; +extern char __bss_start[]; +extern char _end[]; +extern char _vmlinux_start[]; +extern char _vmlinux_end[]; +extern char _initrd_start[]; +extern char _initrd_end[]; +extern char _dtb_start[]; +extern char _dtb_end[]; + +static inline __attribute__((const)) +int __ilog2_u32(u32 n) +{ + int bit; + asm ("cntlzw %0,%1" : "=r" (bit) : "r" (n)); + return 31 - bit; +} + #endif /* _PPC_BOOT_OPS_H_ */ diff --git a/arch/powerpc/boot/ppcboot.h b/arch/powerpc/boot/ppcboot.h index 5290ff2c2b2b..6ae6f9063952 100644 --- a/arch/powerpc/boot/ppcboot.h +++ b/arch/powerpc/boot/ppcboot.h @@ -78,17 +78,18 @@ typedef struct bd_info { hymod_conf_t bi_hymod_conf; /* hymod configuration information */ #endif #if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \ - defined(TARGET_85xx) || defined(TARGET_83xx) + defined(TARGET_85xx) || defined(TARGET_83xx) || defined(TARGET_HAS_ETH1) /* second onboard ethernet port */ unsigned char bi_enet1addr[6]; #define HAVE_ENET1ADDR #endif -#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || defined(TARGET_85xx) +#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \ + defined(TARGET_85xx) || defined(TARGET_HAS_ETH2) /* third onboard ethernet ports */ unsigned char bi_enet2addr[6]; #define HAVE_ENET2ADDR #endif -#if defined(TARGET_440GX) +#if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3) /* fourth onboard ethernet ports */ unsigned char bi_enet3addr[6]; #define HAVE_ENET3ADDR diff --git a/arch/powerpc/boot/prpmc2800.c b/arch/powerpc/boot/prpmc2800.c index f428bac10d4a..9614e1db9dae 100644 --- a/arch/powerpc/boot/prpmc2800.c +++ b/arch/powerpc/boot/prpmc2800.c @@ -21,12 +21,6 @@ #include "gunzip_util.h" #include "mv64x60.h" -extern char _end[]; -extern char _vmlinux_start[], _vmlinux_end[]; -extern char _dtb_start[], _dtb_end[]; - -extern void udelay(long delay); - #define KB 1024U #define MB (KB*KB) #define GB (KB*MB) diff --git a/arch/powerpc/boot/ps3.c b/arch/powerpc/boot/ps3.c index 893d59339c26..d6661151b494 100644 --- a/arch/powerpc/boot/ps3.c +++ b/arch/powerpc/boot/ps3.c @@ -120,10 +120,6 @@ void ps3_copy_vectors(void) void platform_init(void) { - extern char _end[]; - extern char _dtb_start[]; - extern char _initrd_start[]; - extern char _initrd_end[]; const u32 heapsize = 0x1000000 - (u32)_end; /* 16MiB */ void *chosen; unsigned long ft_addr; diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c index eaa0d3ae3518..d47f8e0b4b81 100644 --- a/arch/powerpc/boot/serial.c +++ b/arch/powerpc/boot/serial.c @@ -19,8 +19,6 @@ #include "io.h" #include "ops.h" -extern void udelay(long delay); - static int serial_open(void) { struct serial_console_data *scdp = console_ops.data; @@ -114,29 +112,32 @@ int serial_console_init(void) { void *devp; int rc = -1; - char compat[MAX_PROP_LEN]; devp = serial_get_stdout_devp(); if (devp == NULL) goto err_out; - if (getprop(devp, "compatible", compat, sizeof(compat)) < 0) - goto err_out; - - if (!strcmp(compat, "ns16550")) + if (dt_is_compatible(devp, "ns16550")) rc = ns16550_console_init(devp, &serial_cd); - else if (!strcmp(compat, "marvell,mpsc")) + else if (dt_is_compatible(devp, "marvell,mpsc")) rc = mpsc_console_init(devp, &serial_cd); + else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") || + dt_is_compatible(devp, "fsl,cpm1-smc-uart") || + dt_is_compatible(devp, "fsl,cpm2-scc-uart") || + dt_is_compatible(devp, "fsl,cpm2-smc-uart")) + rc = cpm_console_init(devp, &serial_cd); /* Add other serial console driver calls here */ if (!rc) { console_ops.open = serial_open; console_ops.write = serial_write; - console_ops.edit_cmdline = serial_edit_cmdline; console_ops.close = serial_close; console_ops.data = &serial_cd; + if (serial_cd.getc) + console_ops.edit_cmdline = serial_edit_cmdline; + return 0; } err_out: diff --git a/arch/powerpc/boot/treeboot-bamboo.c b/arch/powerpc/boot/treeboot-bamboo.c new file mode 100644 index 000000000000..1f1fe5aaac12 --- /dev/null +++ b/arch/powerpc/boot/treeboot-bamboo.c @@ -0,0 +1,27 @@ +/* + * Copyright IBM Corporation, 2007 + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * Based on ebony wrapper: + * Copyright 2007 David Gibson, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 of the License + */ +#include "ops.h" +#include "stdio.h" +#include "44x.h" + +extern char _end[]; + +BSS_STACK(4096); + +void platform_init(void) +{ + unsigned long end_of_ram = 0x8000000; + unsigned long avail_ram = end_of_ram - (unsigned long)_end; + + simple_alloc_init(_end, avail_ram, 32, 64); + bamboo_init(); +} diff --git a/arch/powerpc/boot/treeboot-ebony.c b/arch/powerpc/boot/treeboot-ebony.c index 8436a9c55192..21cc4834a384 100644 --- a/arch/powerpc/boot/treeboot-ebony.c +++ b/arch/powerpc/boot/treeboot-ebony.c @@ -16,8 +16,6 @@ #include "stdio.h" #include "44x.h" -extern char _end[]; - BSS_STACK(4096); #define OPENBIOS_MAC_BASE 0xfffffe0c diff --git a/arch/powerpc/boot/treeboot-walnut.c b/arch/powerpc/boot/treeboot-walnut.c new file mode 100644 index 000000000000..3adf2d08a230 --- /dev/null +++ b/arch/powerpc/boot/treeboot-walnut.c @@ -0,0 +1,131 @@ +/* + * Old U-boot compatibility for Walnut + * + * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * Copyright 2007 IBM Corporation + * Based on cuboot-83xx.c, which is: + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "dcr.h" +#include "4xx.h" +#include "io.h" + +BSS_STACK(4096); + +void ibm405gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk) +{ + u32 pllmr = mfdcr(DCRN_CPC0_PLLMR); + u32 cpc0_cr0 = mfdcr(DCRN_405_CPC0_CR0); + u32 cpc0_cr1 = mfdcr(DCRN_405_CPC0_CR1); + u32 cpu, plb, opb, ebc, tb, uart0, uart1, m; + u32 fwdv, fbdv, cbdv, opdv, epdv, udiv; + + fwdv = (8 - ((pllmr & 0xe0000000) >> 29)); + fbdv = (pllmr & 0x1e000000) >> 25; + cbdv = ((pllmr & 0x00060000) >> 17) + 1; + opdv = ((pllmr & 0x00018000) >> 15) + 1; + epdv = ((pllmr & 0x00001800) >> 13) + 2; + udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1; + + m = fwdv * fbdv * cbdv; + + cpu = sysclk * m / fwdv; + plb = cpu / cbdv; + opb = plb / opdv; + ebc = plb / epdv; + + if (cpc0_cr0 & 0x80) { + /* uart0 uses the external clock */ + uart0 = ser_clk; + } else { + uart0 = cpu / udiv; + } + + if (cpc0_cr0 & 0x40) { + /* uart1 uses the external clock */ + uart1 = ser_clk; + } else { + uart1 = cpu / udiv; + } + + /* setup the timebase clock to tick at the cpu frequency */ + cpc0_cr1 = cpc0_cr1 & ~ 0x00800000; + mtdcr(DCRN_CPC0_CR1, cpc0_cr1); + tb = cpu; + + dt_fixup_cpu_clocks(cpu, tb, 0); + dt_fixup_clock("/plb", plb); + dt_fixup_clock("/plb/opb", opb); + dt_fixup_clock("/plb/ebc", ebc); + dt_fixup_clock("/plb/opb/serial@ef600300", uart0); + dt_fixup_clock("/plb/opb/serial@ef600400", uart1); +} + +static void walnut_flashsel_fixup(void) +{ + void *devp, *sram; + u32 reg_flash[3] = {0x0, 0x0, 0x80000}; + u32 reg_sram[3] = {0x0, 0x0, 0x80000}; + u8 *fpga; + u8 fpga_brds1 = 0x0; + + devp = finddevice("/plb/ebc/fpga"); + if (!devp) + fatal("Couldn't locate FPGA node\n\r"); + + if (getprop(devp, "virtual-reg", &fpga, sizeof(fpga)) != sizeof(fpga)) + fatal("no virtual-reg property\n\r"); + + fpga_brds1 = in_8(fpga); + + devp = finddevice("/plb/ebc/flash"); + if (!devp) + fatal("Couldn't locate flash node\n\r"); + + if (getprop(devp, "reg", reg_flash, sizeof(reg_flash)) != sizeof(reg_flash)) + fatal("flash reg property has unexpected size\n\r"); + + sram = finddevice("/plb/ebc/sram"); + if (!sram) + fatal("Couldn't locate sram node\n\r"); + + if (getprop(sram, "reg", reg_sram, sizeof(reg_sram)) != sizeof(reg_sram)) + fatal("sram reg property has unexpected size\n\r"); + + if (fpga_brds1 & 0x1) { + reg_flash[1] ^= 0x80000; + reg_sram[1] ^= 0x80000; + } + + setprop(devp, "reg", reg_flash, sizeof(reg_flash)); + setprop(sram, "reg", reg_sram, sizeof(reg_sram)); +} + +static void walnut_fixups(void) +{ + ibm4xx_fixup_memsize(); + ibm405gp_fixup_clocks(33330000, 0xa8c000); + ibm4xx_quiesce_eth((u32 *)0xef600800, NULL); + ibm4xx_fixup_ebc_ranges("/plb/ebc"); + walnut_flashsel_fixup(); +} + +void platform_init(void) +{ + unsigned long end_of_ram = 0x2000000; + unsigned long avail_ram = end_of_ram - (unsigned long) _end; + + simple_alloc_init(_end, avail_ram, 32, 32); + platform_ops.fixups = walnut_fixups; + platform_ops.exit = ibm40x_dbcr_reset; + ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + serial_console_init(); +} diff --git a/arch/powerpc/configs/bamboo_defconfig b/arch/powerpc/configs/bamboo_defconfig new file mode 100644 index 000000000000..b592dec4640f --- /dev/null +++ b/arch/powerpc/configs/bamboo_defconfig @@ -0,0 +1,775 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc1 +# Fri Aug 3 10:46:53 2007 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +CONFIG_4xx=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Platform support +# +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +CONFIG_BAMBOO=y +# CONFIG_EBONY is not set +CONFIG_440EP=y +CONFIG_IBM440EP_ERR42=y +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_CPM2 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_PROC_DEVICETREE=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +CONFIG_SECCOMP=y +CONFIG_WANT_DEVICE_TREE=y +CONFIG_DEVICE_TREE="bamboo.dts" +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x01000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_MACINTOSH_DRIVERS=y +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_ARCNET is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set +# CONFIG_UCC_SLOW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_DEBUGGER=y +# CONFIG_KGDB is not set +# CONFIG_XMON is not set +# CONFIG_BDI_SWITCH is not set +CONFIG_PPC_EARLY_DEBUG=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set +# CONFIG_PPC_EARLY_DEBUG_BEAT is not set +CONFIG_PPC_EARLY_DEBUG_44x=y +CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300 +CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x0 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_HW=y diff --git a/arch/powerpc/configs/ebony_defconfig b/arch/powerpc/configs/ebony_defconfig index ebb8167608b8..3a50467b1f75 100644 --- a/arch/powerpc/configs/ebony_defconfig +++ b/arch/powerpc/configs/ebony_defconfig @@ -313,7 +313,80 @@ CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -607,6 +680,15 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -665,6 +747,7 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y diff --git a/arch/powerpc/configs/sequoia_defconfig b/arch/powerpc/configs/sequoia_defconfig new file mode 100644 index 000000000000..58256625b5b8 --- /dev/null +++ b/arch/powerpc/configs/sequoia_defconfig @@ -0,0 +1,776 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc3 +# Mon Aug 27 20:19:13 2007 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +CONFIG_4xx=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Platform support +# +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_BAMBOO is not set +# CONFIG_EBONY is not set +CONFIG_SEQUOIA=y +CONFIG_440EPX=y +CONFIG_440A=y +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_CPM2 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_PROC_DEVICETREE=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +CONFIG_SECCOMP=y +CONFIG_WANT_DEVICE_TREE=y +CONFIG_DEVICE_TREE="sequoia.dts" +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x01000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_MACINTOSH_DRIVERS=y +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_ARCNET is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set +# CONFIG_UCC_SLOW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_DEBUGGER=y +# CONFIG_KGDB is not set +# CONFIG_XMON is not set +# CONFIG_BDI_SWITCH is not set +CONFIG_PPC_EARLY_DEBUG=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set +# CONFIG_PPC_EARLY_DEBUG_BEAT is not set +CONFIG_PPC_EARLY_DEBUG_44x=y +CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300 +CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_HW=y diff --git a/arch/powerpc/configs/walnut_defconfig b/arch/powerpc/configs/walnut_defconfig new file mode 100644 index 000000000000..766bf840c18d --- /dev/null +++ b/arch/powerpc/configs/walnut_defconfig @@ -0,0 +1,773 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc4 +# Wed Sep 5 12:06:37 2007 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +CONFIG_40x=y +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_4xx=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Platform support +# +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +CONFIG_WALNUT=y +CONFIG_405GP=y +CONFIG_IBM405_ERR77=y +CONFIG_IBM405_ERR51=y +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_CPM2 is not set +# CONFIG_FSL_ULI1575 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_WANT_DEVICE_TREE=y +CONFIG_DEVICE_TREE="walnut.dts" +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_WALNUT is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set +# CONFIG_UCC_SLOW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUGGER is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_HW=y diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index b0cb2e662c25..967afc517d8f 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -46,7 +46,7 @@ ifeq ($(CONFIG_PPC_MERGE),y) extra-$(CONFIG_PPC_STD_MMU) := head_32.o extra-$(CONFIG_PPC64) := head_64.o -extra-$(CONFIG_40x) := head_4xx.o +extra-$(CONFIG_40x) := head_40x.o extra-$(CONFIG_44x) := head_44x.o extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o extra-$(CONFIG_8xx) := head_8xx.o @@ -80,13 +80,6 @@ ifneq ($(CONFIG_PPC_INDIRECT_IO),y) obj-y += iomap.o endif -ifeq ($(CONFIG_PPC_ISERIES),y) -CFLAGS_lparmap.s += -g0 -extra-y += lparmap.s -$(obj)/head_64.o: $(obj)/lparmap.s -AFLAGS_head_64.o += -I$(obj) -endif - else # stuff used from here for ARCH=ppc smpobj-$(CONFIG_SMP) += smp.o diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c index 5c9ff7f5c44e..4c47f9cc0d9a 100644 --- a/arch/powerpc/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -38,7 +38,7 @@ struct aligninfo { /* Bits in the flags field */ #define LD 0 /* load */ #define ST 1 /* store */ -#define SE 2 /* sign-extend value */ +#define SE 2 /* sign-extend value, or FP ld/st as word */ #define F 4 /* to/from fp regs */ #define U 8 /* update index register */ #define M 0x10 /* multiple load/store */ @@ -87,9 +87,9 @@ static struct aligninfo aligninfo[128] = { { 8, LD+F+U }, /* 00 1 1001: lfdu */ { 4, ST+F+S+U }, /* 00 1 1010: stfsu */ { 8, ST+F+U }, /* 00 1 1011: stfdu */ - INVALID, /* 00 1 1100 */ + { 16, LD+F }, /* 00 1 1100: lfdp */ INVALID, /* 00 1 1101 */ - INVALID, /* 00 1 1110 */ + { 16, ST+F }, /* 00 1 1110: stfdp */ INVALID, /* 00 1 1111 */ { 8, LD }, /* 01 0 0000: ldx */ INVALID, /* 01 0 0001 */ @@ -167,10 +167,10 @@ static struct aligninfo aligninfo[128] = { { 8, LD+F }, /* 11 0 1001: lfdx */ { 4, ST+F+S }, /* 11 0 1010: stfsx */ { 8, ST+F }, /* 11 0 1011: stfdx */ - INVALID, /* 11 0 1100 */ - { 8, LD+M }, /* 11 0 1101: lmd */ - INVALID, /* 11 0 1110 */ - { 8, ST+M }, /* 11 0 1111: stmd */ + { 16, LD+F }, /* 11 0 1100: lfdpx */ + { 4, LD+F+SE }, /* 11 0 1101: lfiwax */ + { 16, ST+F }, /* 11 0 1110: stfdpx */ + { 4, ST+F }, /* 11 0 1111: stfiwx */ { 4, LD+U }, /* 11 1 0000: lwzux */ INVALID, /* 11 1 0001 */ { 4, ST+U }, /* 11 1 0010: stwux */ @@ -356,6 +356,42 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr, return 1; } +/* + * Emulate floating-point pair loads and stores. + * Only POWER6 has these instructions, and it does true little-endian, + * so we don't need the address swizzling. + */ +static int emulate_fp_pair(struct pt_regs *regs, unsigned char __user *addr, + unsigned int reg, unsigned int flags) +{ + char *ptr = (char *) ¤t->thread.fpr[reg]; + int i, ret; + + if (!(flags & F)) + return 0; + if (reg & 1) + return 0; /* invalid form: FRS/FRT must be even */ + if (!(flags & SW)) { + /* not byte-swapped - easy */ + if (!(flags & ST)) + ret = __copy_from_user(ptr, addr, 16); + else + ret = __copy_to_user(addr, ptr, 16); + } else { + /* each FPR value is byte-swapped separately */ + ret = 0; + for (i = 0; i < 16; ++i) { + if (!(flags & ST)) + ret |= __get_user(ptr[i^7], addr + i); + else + ret |= __put_user(ptr[i^7], addr + i); + } + } + if (ret) + return -EFAULT; + return 1; /* exception handled and fixed up */ +} + /* * Called on alignment exception. Attempts to fixup @@ -471,6 +507,10 @@ int fix_alignment(struct pt_regs *regs) flush_fp_to_thread(current); } + /* Special case for 16-byte FP loads and stores */ + if (nb == 16) + return emulate_fp_pair(regs, addr, reg, flags); + /* If we are loading, get the data from user space, else * get it from register values */ @@ -531,7 +571,8 @@ int fix_alignment(struct pt_regs *regs) * or floating point single precision conversion */ switch (flags & ~(U|SW)) { - case LD+SE: /* sign extend */ + case LD+SE: /* sign extending integer loads */ + case LD+F+SE: /* sign extend for lfiwax */ if ( nb == 2 ) data.ll = data.x16.low16; else /* nb must be 4 */ diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 2cb1d9487796..a40805328f9b 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -312,5 +312,13 @@ int main(void) #ifdef CONFIG_BUG DEFINE(BUG_ENTRY_SIZE, sizeof(struct bug_entry)); #endif + +#ifdef CONFIG_PPC_ISERIES + /* the assembler miscalculates the VSID values */ + DEFINE(PAGE_OFFSET_ESID, GET_ESID(PAGE_OFFSET)); + DEFINE(PAGE_OFFSET_VSID, KERNEL_VSID(PAGE_OFFSET)); + DEFINE(VMALLOC_START_ESID, GET_ESID(VMALLOC_START)); + DEFINE(VMALLOC_START_VSID, KERNEL_VSID(VMALLOC_START)); +#endif return 0; } diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c index e7b684689e04..3ef51fb6f107 100644 --- a/arch/powerpc/kernel/btext.c +++ b/arch/powerpc/kernel/btext.c @@ -11,7 +11,6 @@ #include <asm/sections.h> #include <asm/prom.h> #include <asm/btext.h> -#include <asm/prom.h> #include <asm/page.h> #include <asm/mmu.h> #include <asm/pgtable.h> diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index b1f8000952f3..5873073c9045 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1132,6 +1132,24 @@ static struct cpu_spec cpu_specs[] = { .dcache_bsize = 32, .platform = "ppc440", }, + { /* 440EPX */ + .pvr_mask = 0xf0000ffb, + .pvr_value = 0x200008D0, + .cpu_name = "440EPX", + .cpu_features = CPU_FTRS_44X, + .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, + .icache_bsize = 32, + .dcache_bsize = 32, + }, + { /* 440GRX */ + .pvr_mask = 0xf0000ffb, + .pvr_value = 0x200008D8, + .cpu_name = "440GRX", + .cpu_features = CPU_FTRS_44X, + .cpu_user_features = COMMON_USER_BOOKE, + .icache_bsize = 32, + .dcache_bsize = 32, + }, { /* 440GP Rev. B */ .pvr_mask = 0xf0000fff, .pvr_value = 0x40000440, diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 37658ea417fa..77c749a13378 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -24,7 +24,6 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/types.h> -#include <linux/irq.h> #include <asm/processor.h> #include <asm/machdep.h> diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c index 2f6f5a7bc69e..ffa91d673ec8 100644 --- a/arch/powerpc/kernel/crash_dump.c +++ b/arch/powerpc/kernel/crash_dump.c @@ -25,7 +25,7 @@ #define DBG(fmt...) #endif -void reserve_kdump_trampoline(void) +void __init reserve_kdump_trampoline(void) { lmb_reserve(0, KDUMP_RESERVE_LIMIT); } diff --git a/arch/powerpc/kernel/head_4xx.S b/arch/powerpc/kernel/head_40x.S index adc7f8097cd4..a8e045773a92 100644 --- a/arch/powerpc/kernel/head_4xx.S +++ b/arch/powerpc/kernel/head_40x.S @@ -35,7 +35,6 @@ #include <asm/page.h> #include <asm/mmu.h> #include <asm/pgtable.h> -#include <asm/ibm4xx.h> #include <asm/cputable.h> #include <asm/thread_info.h> #include <asm/ppc_asm.h> @@ -772,7 +771,7 @@ finish_tlb_load: */ lwz r9, tlb_4xx_index@l(0) addi r9, r9, 1 - andi. r9, r9, (PPC4XX_TLB_SIZE-1) + andi. r9, r9, (PPC40X_TLB_SIZE-1) stw r9, tlb_4xx_index@l(0) 6: diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index 88695963f587..e26d26e31813 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -217,7 +217,7 @@ skpinv: addi r4,r4,1 /* Increment */ lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */ mtspr SPRN_IVPR,r4 -#ifdef CONFIG_440EP +#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) /* Clear DAPUIB flag in CCR0 (enable APU between CPU and FPU) */ mfspr r2,SPRN_CCR0 lis r3,0xffef diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 171800002ede..33c4e8cab0ba 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -34,6 +34,8 @@ #include <asm/iseries/lpar_map.h> #include <asm/thread_info.h> #include <asm/firmware.h> +#include <asm/page_64.h> +#include <asm/exception.h> #define DO_SOFT_DISABLE @@ -144,344 +146,9 @@ exception_marker: .text /* - * The following macros define the code that appears as - * the prologue to each of the exception handlers. They - * are split into two parts to allow a single kernel binary - * to be used for pSeries and iSeries. - * LOL. One day... - paulus - */ - -/* - * We make as much of the exception code common between native - * exception handlers (including pSeries LPAR) and iSeries LPAR - * implementations as possible. - */ - -/* * This is the start of the interrupt handlers for pSeries * This code runs with relocation off. */ -#define EX_R9 0 -#define EX_R10 8 -#define EX_R11 16 -#define EX_R12 24 -#define EX_R13 32 -#define EX_SRR0 40 -#define EX_DAR 48 -#define EX_DSISR 56 -#define EX_CCR 60 -#define EX_R3 64 -#define EX_LR 72 - -/* - * We're short on space and time in the exception prolog, so we can't - * use the normal SET_REG_IMMEDIATE macro. Normally we just need the - * low halfword of the address, but for Kdump we need the whole low - * word. - */ -#ifdef CONFIG_CRASH_DUMP -#define LOAD_HANDLER(reg, label) \ - oris reg,reg,(label)@h; /* virt addr of handler ... */ \ - ori reg,reg,(label)@l; /* .. and the rest */ -#else -#define LOAD_HANDLER(reg, label) \ - ori reg,reg,(label)@l; /* virt addr of handler ... */ -#endif - -/* - * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode. - * The firmware calls the registered system_reset_fwnmi and - * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run - * a 32bit application at the time of the event. - * This firmware bug is present on POWER4 and JS20. - */ -#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label) \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,area+EX_R9(r13); /* save r9 - r12 */ \ - std r10,area+EX_R10(r13); \ - std r11,area+EX_R11(r13); \ - std r12,area+EX_R12(r13); \ - mfspr r9,SPRN_SPRG1; \ - std r9,area+EX_R13(r13); \ - mfcr r9; \ - clrrdi r12,r13,32; /* get high part of &label */ \ - mfmsr r10; \ - /* force 64bit mode */ \ - li r11,5; /* MSR_SF_LG|MSR_ISF_LG */ \ - rldimi r10,r11,61,0; /* insert into top 3 bits */ \ - /* done 64bit mode */ \ - mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - LOAD_HANDLER(r12,label) \ - ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ - mtspr SPRN_SRR0,r12; \ - mfspr r12,SPRN_SRR1; /* and SRR1 */ \ - mtspr SPRN_SRR1,r10; \ - rfid; \ - b . /* prevent speculative execution */ - -#define EXCEPTION_PROLOG_PSERIES(area, label) \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,area+EX_R9(r13); /* save r9 - r12 */ \ - std r10,area+EX_R10(r13); \ - std r11,area+EX_R11(r13); \ - std r12,area+EX_R12(r13); \ - mfspr r9,SPRN_SPRG1; \ - std r9,area+EX_R13(r13); \ - mfcr r9; \ - clrrdi r12,r13,32; /* get high part of &label */ \ - mfmsr r10; \ - mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - LOAD_HANDLER(r12,label) \ - ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ - mtspr SPRN_SRR0,r12; \ - mfspr r12,SPRN_SRR1; /* and SRR1 */ \ - mtspr SPRN_SRR1,r10; \ - rfid; \ - b . /* prevent speculative execution */ - -/* - * This is the start of the interrupt handlers for iSeries - * This code runs with relocation on. - */ -#define EXCEPTION_PROLOG_ISERIES_1(area) \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,area+EX_R9(r13); /* save r9 - r12 */ \ - std r10,area+EX_R10(r13); \ - std r11,area+EX_R11(r13); \ - std r12,area+EX_R12(r13); \ - mfspr r9,SPRN_SPRG1; \ - std r9,area+EX_R13(r13); \ - mfcr r9 - -#define EXCEPTION_PROLOG_ISERIES_2 \ - mfmsr r10; \ - ld r12,PACALPPACAPTR(r13); \ - ld r11,LPPACASRR0(r12); \ - ld r12,LPPACASRR1(r12); \ - ori r10,r10,MSR_RI; \ - mtmsrd r10,1 - -/* - * The common exception prolog is used for all except a few exceptions - * such as a segment miss on a kernel address. We have to be prepared - * to take another exception from the point where we first touch the - * kernel stack onwards. - * - * On entry r13 points to the paca, r9-r13 are saved in the paca, - * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and - * SRR1, and relocation is on. - */ -#define EXCEPTION_PROLOG_COMMON(n, area) \ - andi. r10,r12,MSR_PR; /* See if coming from user */ \ - mr r10,r1; /* Save r1 */ \ - subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \ - beq- 1f; \ - ld r1,PACAKSAVE(r13); /* kernel stack to use */ \ -1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \ - bge- cr1,2f; /* abort if it is */ \ - b 3f; \ -2: li r1,(n); /* will be reloaded later */ \ - sth r1,PACA_TRAP_SAVE(r13); \ - b bad_stack; \ -3: std r9,_CCR(r1); /* save CR in stackframe */ \ - std r11,_NIP(r1); /* save SRR0 in stackframe */ \ - std r12,_MSR(r1); /* save SRR1 in stackframe */ \ - std r10,0(r1); /* make stack chain pointer */ \ - std r0,GPR0(r1); /* save r0 in stackframe */ \ - std r10,GPR1(r1); /* save r1 in stackframe */ \ - ACCOUNT_CPU_USER_ENTRY(r9, r10); \ - std r2,GPR2(r1); /* save r2 in stackframe */ \ - SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ - SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ - ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \ - ld r10,area+EX_R10(r13); \ - std r9,GPR9(r1); \ - std r10,GPR10(r1); \ - ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \ - ld r10,area+EX_R12(r13); \ - ld r11,area+EX_R13(r13); \ - std r9,GPR11(r1); \ - std r10,GPR12(r1); \ - std r11,GPR13(r1); \ - ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ - mflr r9; /* save LR in stackframe */ \ - std r9,_LINK(r1); \ - mfctr r10; /* save CTR in stackframe */ \ - std r10,_CTR(r1); \ - lbz r10,PACASOFTIRQEN(r13); \ - mfspr r11,SPRN_XER; /* save XER in stackframe */ \ - std r10,SOFTE(r1); \ - std r11,_XER(r1); \ - li r9,(n)+1; \ - std r9,_TRAP(r1); /* set trap number */ \ - li r10,0; \ - ld r11,exception_marker@toc(r2); \ - std r10,RESULT(r1); /* clear regs->result */ \ - std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ - -/* - * Exception vectors. - */ -#define STD_EXCEPTION_PSERIES(n, label) \ - . = n; \ - .globl label##_pSeries; \ -label##_pSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) - -#define HSTD_EXCEPTION_PSERIES(n, label) \ - . = n; \ - .globl label##_pSeries; \ -label##_pSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r20; /* save r20 */ \ - mfspr r20,SPRN_HSRR0; /* copy HSRR0 to SRR0 */ \ - mtspr SPRN_SRR0,r20; \ - mfspr r20,SPRN_HSRR1; /* copy HSRR0 to SRR0 */ \ - mtspr SPRN_SRR1,r20; \ - mfspr r20,SPRN_SPRG1; /* restore r20 */ \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) - - -#define MASKABLE_EXCEPTION_PSERIES(n, label) \ - . = n; \ - .globl label##_pSeries; \ -label##_pSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \ - std r10,PACA_EXGEN+EX_R10(r13); \ - lbz r10,PACASOFTIRQEN(r13); \ - mfcr r9; \ - cmpwi r10,0; \ - beq masked_interrupt; \ - mfspr r10,SPRN_SPRG1; \ - std r10,PACA_EXGEN+EX_R13(r13); \ - std r11,PACA_EXGEN+EX_R11(r13); \ - std r12,PACA_EXGEN+EX_R12(r13); \ - clrrdi r12,r13,32; /* get high part of &label */ \ - mfmsr r10; \ - mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - LOAD_HANDLER(r12,label##_common) \ - ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ - mtspr SPRN_SRR0,r12; \ - mfspr r12,SPRN_SRR1; /* and SRR1 */ \ - mtspr SPRN_SRR1,r10; \ - rfid; \ - b . /* prevent speculative execution */ - -#define STD_EXCEPTION_ISERIES(n, label, area) \ - .globl label##_iSeries; \ -label##_iSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - EXCEPTION_PROLOG_ISERIES_1(area); \ - EXCEPTION_PROLOG_ISERIES_2; \ - b label##_common - -#define MASKABLE_EXCEPTION_ISERIES(n, label) \ - .globl label##_iSeries; \ -label##_iSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN); \ - lbz r10,PACASOFTIRQEN(r13); \ - cmpwi 0,r10,0; \ - beq- label##_iSeries_masked; \ - EXCEPTION_PROLOG_ISERIES_2; \ - b label##_common; \ - -#ifdef CONFIG_PPC_ISERIES -#define DISABLE_INTS \ - li r11,0; \ - stb r11,PACASOFTIRQEN(r13); \ -BEGIN_FW_FTR_SECTION; \ - stb r11,PACAHARDIRQEN(r13); \ -END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \ -BEGIN_FW_FTR_SECTION; \ - mfmsr r10; \ - ori r10,r10,MSR_EE; \ - mtmsrd r10,1; \ -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) - -#else -#define DISABLE_INTS \ - li r11,0; \ - stb r11,PACASOFTIRQEN(r13); \ - stb r11,PACAHARDIRQEN(r13) - -#endif /* CONFIG_PPC_ISERIES */ - -#define ENABLE_INTS \ - ld r12,_MSR(r1); \ - mfmsr r11; \ - rlwimi r11,r12,0,MSR_EE; \ - mtmsrd r11,1 - -#define STD_EXCEPTION_COMMON(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - DISABLE_INTS; \ - bl .save_nvgprs; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except - -/* - * Like STD_EXCEPTION_COMMON, but for exceptions that can occur - * in the idle task and therefore need the special idle handling. - */ -#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - FINISH_NAP; \ - DISABLE_INTS; \ - bl .save_nvgprs; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except - -#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - FINISH_NAP; \ - DISABLE_INTS; \ - bl .ppc64_runlatch_on; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except_lite - -/* - * When the idle code in power4_idle puts the CPU into NAP mode, - * it has to do so in a loop, and relies on the external interrupt - * and decrementer interrupt entry code to get it out of the loop. - * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags - * to signal that it is in the loop and needs help to get out. - */ -#ifdef CONFIG_PPC_970_NAP -#define FINISH_NAP \ -BEGIN_FTR_SECTION \ - clrrdi r11,r1,THREAD_SHIFT; \ - ld r9,TI_LOCAL_FLAGS(r11); \ - andi. r10,r9,_TLF_NAPPING; \ - bnel power4_fixup_nap; \ -END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) -#else -#define FINISH_NAP -#endif - -/* - * Start of pSeries system interrupt routines - */ . = 0x100 .globl __start_interrupts __start_interrupts: @@ -691,192 +358,6 @@ machine_check_fwnmi: mtspr SPRN_SPRG1,r13 /* save r13 */ EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(PACA_EXMC, machine_check_common) -#ifdef CONFIG_PPC_ISERIES -/*** ISeries-LPAR interrupt handlers ***/ - - STD_EXCEPTION_ISERIES(0x200, machine_check, PACA_EXMC) - - .globl data_access_iSeries -data_access_iSeries: - mtspr SPRN_SPRG1,r13 -BEGIN_FTR_SECTION - mtspr SPRN_SPRG2,r12 - mfspr r13,SPRN_DAR - mfspr r12,SPRN_DSISR - srdi r13,r13,60 - rlwimi r13,r12,16,0x20 - mfcr r12 - cmpwi r13,0x2c - beq .do_stab_bolted_iSeries - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN) - EXCEPTION_PROLOG_ISERIES_2 - b data_access_common - -.do_stab_bolted_iSeries: - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 - EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB) - EXCEPTION_PROLOG_ISERIES_2 - b .do_stab_bolted - - .globl data_access_slb_iSeries -data_access_slb_iSeries: - mtspr SPRN_SPRG1,r13 /* save r13 */ - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - mfspr r3,SPRN_DAR - std r9,PACA_EXSLB+EX_R9(r13) - mfcr r9 -#ifdef __DISABLED__ - cmpdi r3,0 - bge slb_miss_user_iseries -#endif - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 - std r10,PACA_EXSLB+EX_R13(r13) - ld r12,PACALPPACAPTR(r13) - ld r12,LPPACASRR1(r12) - b .slb_miss_realmode - - STD_EXCEPTION_ISERIES(0x400, instruction_access, PACA_EXGEN) - - .globl instruction_access_slb_iSeries -instruction_access_slb_iSeries: - mtspr SPRN_SPRG1,r13 /* save r13 */ - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - ld r3,PACALPPACAPTR(r13) - ld r3,LPPACASRR0(r3) /* get SRR0 value */ - std r9,PACA_EXSLB+EX_R9(r13) - mfcr r9 -#ifdef __DISABLED__ - cmpdi r3,0 - bge .slb_miss_user_iseries -#endif - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 - std r10,PACA_EXSLB+EX_R13(r13) - ld r12,PACALPPACAPTR(r13) - ld r12,LPPACASRR1(r12) - b .slb_miss_realmode - -#ifdef __DISABLED__ -slb_miss_user_iseries: - std r10,PACA_EXGEN+EX_R10(r13) - std r11,PACA_EXGEN+EX_R11(r13) - std r12,PACA_EXGEN+EX_R12(r13) - mfspr r10,SPRG1 - ld r11,PACA_EXSLB+EX_R9(r13) - ld r12,PACA_EXSLB+EX_R3(r13) - std r10,PACA_EXGEN+EX_R13(r13) - std r11,PACA_EXGEN+EX_R9(r13) - std r12,PACA_EXGEN+EX_R3(r13) - EXCEPTION_PROLOG_ISERIES_2 - b slb_miss_user_common -#endif - - MASKABLE_EXCEPTION_ISERIES(0x500, hardware_interrupt) - STD_EXCEPTION_ISERIES(0x600, alignment, PACA_EXGEN) - STD_EXCEPTION_ISERIES(0x700, program_check, PACA_EXGEN) - STD_EXCEPTION_ISERIES(0x800, fp_unavailable, PACA_EXGEN) - MASKABLE_EXCEPTION_ISERIES(0x900, decrementer) - STD_EXCEPTION_ISERIES(0xa00, trap_0a, PACA_EXGEN) - STD_EXCEPTION_ISERIES(0xb00, trap_0b, PACA_EXGEN) - - .globl system_call_iSeries -system_call_iSeries: - mr r9,r13 - mfspr r13,SPRN_SPRG3 - EXCEPTION_PROLOG_ISERIES_2 - b system_call_common - - STD_EXCEPTION_ISERIES( 0xd00, single_step, PACA_EXGEN) - STD_EXCEPTION_ISERIES( 0xe00, trap_0e, PACA_EXGEN) - STD_EXCEPTION_ISERIES( 0xf00, performance_monitor, PACA_EXGEN) - - .globl system_reset_iSeries -system_reset_iSeries: - mfspr r13,SPRN_SPRG3 /* Get paca address */ - mfmsr r24 - ori r24,r24,MSR_RI - mtmsrd r24 /* RI on */ - lhz r24,PACAPACAINDEX(r13) /* Get processor # */ - cmpwi 0,r24,0 /* Are we processor 0? */ - bne 1f - b .__start_initialization_iSeries /* Start up the first processor */ -1: mfspr r4,SPRN_CTRLF - li r5,CTRL_RUNLATCH /* Turn off the run light */ - andc r4,r4,r5 - mtspr SPRN_CTRLT,r4 - -1: - HMT_LOW -#ifdef CONFIG_SMP - lbz r23,PACAPROCSTART(r13) /* Test if this processor - * should start */ - sync - LOAD_REG_IMMEDIATE(r3,current_set) - sldi r28,r24,3 /* get current_set[cpu#] */ - ldx r3,r3,r28 - addi r1,r3,THREAD_SIZE - subi r1,r1,STACK_FRAME_OVERHEAD - - cmpwi 0,r23,0 - beq iSeries_secondary_smp_loop /* Loop until told to go */ - bne __secondary_start /* Loop until told to go */ -iSeries_secondary_smp_loop: - /* Let the Hypervisor know we are alive */ - /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */ - lis r3,0x8002 - rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */ -#else /* CONFIG_SMP */ - /* Yield the processor. This is required for non-SMP kernels - which are running on multi-threaded machines. */ - lis r3,0x8000 - rldicr r3,r3,32,15 /* r3 = (r3 << 32) & 0xffff000000000000 */ - addi r3,r3,18 /* r3 = 0x8000000000000012 which is "yield" */ - li r4,0 /* "yield timed" */ - li r5,-1 /* "yield forever" */ -#endif /* CONFIG_SMP */ - li r0,-1 /* r0=-1 indicates a Hypervisor call */ - sc /* Invoke the hypervisor via a system call */ - mfspr r13,SPRN_SPRG3 /* Put r13 back ???? */ - b 1b /* If SMP not configured, secondaries - * loop forever */ - -decrementer_iSeries_masked: - /* We may not have a valid TOC pointer in here. */ - li r11,1 - ld r12,PACALPPACAPTR(r13) - stb r11,LPPACADECRINT(r12) - LOAD_REG_IMMEDIATE(r12, tb_ticks_per_jiffy) - lwz r12,0(r12) - mtspr SPRN_DEC,r12 - /* fall through */ - -hardware_interrupt_iSeries_masked: - mtcrf 0x80,r9 /* Restore regs */ - ld r12,PACALPPACAPTR(r13) - ld r11,LPPACASRR0(r12) - ld r12,LPPACASRR1(r12) - mtspr SPRN_SRR0,r11 - mtspr SPRN_SRR1,r12 - ld r9,PACA_EXGEN+EX_R9(r13) - ld r10,PACA_EXGEN+EX_R10(r13) - ld r11,PACA_EXGEN+EX_R11(r13) - ld r12,PACA_EXGEN+EX_R12(r13) - ld r13,PACA_EXGEN+EX_R13(r13) - rfid - b . /* prevent speculative execution */ -#endif /* CONFIG_PPC_ISERIES */ - /*** Common interrupt handlers ***/ STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception) @@ -1519,8 +1000,8 @@ _GLOBAL(do_stab_bolted) * Space for CPU0's segment table. * * On iSeries, the hypervisor must fill in at least one entry before - * we get control (with relocate on). The address is give to the hv - * as a page number (see xLparMap in lpardata.c), so this must be at a + * we get control (with relocate on). The address is given to the hv + * as a page number (see xLparMap below), so this must be at a * fixed address (the linker can't compute (u64)&initial_stab >> * PAGE_SHIFT). */ @@ -1542,12 +1023,22 @@ fwnmi_data_area: * both pSeries and iSeries */ #ifdef CONFIG_PPC_ISERIES . = LPARMAP_PHYS -#include "lparmap.s" -/* - * This ".text" is here for old compilers that generate a trailing - * .note section when compiling .c files to .s - */ - .text + .globl xLparMap +xLparMap: + .quad HvEsidsToMap /* xNumberEsids */ + .quad HvRangesToMap /* xNumberRanges */ + .quad STAB0_PAGE /* xSegmentTableOffs */ + .zero 40 /* xRsvd */ + /* xEsids (HvEsidsToMap entries of 2 quads) */ + .quad PAGE_OFFSET_ESID /* xKernelEsid */ + .quad PAGE_OFFSET_VSID /* xKernelVsid */ + .quad VMALLOC_START_ESID /* xKernelEsid */ + .quad VMALLOC_START_VSID /* xKernelVsid */ + /* xRanges (HvRangesToMap entries of 3 quads) */ + .quad HvPagesToMap /* xPages */ + .quad 0 /* xOffset */ + .quad PAGE_OFFSET_VSID << (SID_SHIFT - HW_PAGE_SHIFT) /* xVPN */ + #endif /* CONFIG_PPC_ISERIES */ . = 0x8000 @@ -1611,39 +1102,6 @@ _GLOBAL(generic_secondary_smp_init) b __secondary_start #endif -#ifdef CONFIG_PPC_ISERIES -_INIT_STATIC(__start_initialization_iSeries) - /* Clear out the BSS */ - LOAD_REG_IMMEDIATE(r11,__bss_stop) - LOAD_REG_IMMEDIATE(r8,__bss_start) - sub r11,r11,r8 /* bss size */ - addi r11,r11,7 /* round up to an even double word */ - rldicl. r11,r11,61,3 /* shift right by 3 */ - beq 4f - addi r8,r8,-8 - li r0,0 - mtctr r11 /* zero this many doublewords */ -3: stdu r0,8(r8) - bdnz 3b -4: - LOAD_REG_IMMEDIATE(r1,init_thread_union) - addi r1,r1,THREAD_SIZE - li r0,0 - stdu r0,-STACK_FRAME_OVERHEAD(r1) - - LOAD_REG_IMMEDIATE(r2,__toc_start) - addi r2,r2,0x4000 - addi r2,r2,0x4000 - - bl .iSeries_early_setup - bl .early_setup - - /* relocation is on at this point */ - - b .start_here_common -#endif /* CONFIG_PPC_ISERIES */ - - _STATIC(__mmu_off) mfmsr r3 andi. r0,r3,MSR_IR|MSR_DR @@ -1891,6 +1349,7 @@ _GLOBAL(pmac_secondary_start) * r13 = paca virtual address * SPRG3 = paca virtual address */ + .globl __secondary_start __secondary_start: /* Set thread priority to MEDIUM */ HMT_MEDIUM @@ -2021,7 +1480,7 @@ _INIT_STATIC(start_here_multiplatform) b . /* prevent speculative execution */ /* This is where all platforms converge execution */ -_INIT_STATIC(start_here_common) +_INIT_GLOBAL(start_here_common) /* relocation is on at this point */ /* The following code sets up the SP and TOC now that we are */ diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index c08ceca6277d..e4ec6eee81a8 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -30,7 +30,6 @@ #include <linux/spinlock.h> #include <linux/string.h> #include <linux/dma-mapping.h> -#include <linux/init.h> #include <linux/bitops.h> #include <asm/io.h> #include <asm/prom.h> diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 24bea97c736c..dfad0e469eec 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -272,7 +272,7 @@ void do_IRQ(struct pt_regs *regs) struct thread_info *curtp, *irqtp; #endif - irq_enter(); + irq_enter(); #ifdef CONFIG_DEBUG_STACKOVERFLOW /* Debugging check for stack overflow: is there less than 2KB free? */ @@ -321,7 +321,7 @@ void do_IRQ(struct pt_regs *regs) /* That's not SMP safe ... but who cares ? */ ppc_spurious_interrupts++; - irq_exit(); + irq_exit(); set_irq_regs(old_regs); #ifdef CONFIG_PPC_ISERIES diff --git a/arch/powerpc/kernel/lparmap.c b/arch/powerpc/kernel/lparmap.c deleted file mode 100644 index af11285ffbd1..000000000000 --- a/arch/powerpc/kernel/lparmap.c +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (C) 2005 Stephen Rothwell IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/iseries/lpar_map.h> - -/* The # is to stop gcc trying to make .text nonexecutable */ -const struct LparMap __attribute__((__section__(".text #"))) xLparMap = { - .xNumberEsids = HvEsidsToMap, - .xNumberRanges = HvRangesToMap, - .xSegmentTableOffs = STAB0_PAGE, - - .xEsids = { - { .xKernelEsid = GET_ESID(PAGE_OFFSET), - .xKernelVsid = KERNEL_VSID(PAGE_OFFSET), }, - { .xKernelEsid = GET_ESID(VMALLOC_START), - .xKernelVsid = KERNEL_VSID(VMALLOC_START), }, - }, - - .xRanges = { - { .xPages = HvPagesToMap, - .xOffset = 0, - .xVPN = KERNEL_VSID(PAGE_OFFSET) << (SID_SHIFT - HW_PAGE_SHIFT), - }, - }, -}; diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c index f9676f52c6d8..0ed31f220482 100644 --- a/arch/powerpc/kernel/nvram_64.c +++ b/arch/powerpc/kernel/nvram_64.c @@ -34,21 +34,10 @@ #undef DEBUG_NVRAM -static int nvram_scan_partitions(void); -static int nvram_setup_partition(void); -static int nvram_create_os_partition(void); -static int nvram_remove_os_partition(void); - static struct nvram_partition * nvram_part; static long nvram_error_log_index = -1; static long nvram_error_log_size = 0; -int no_logging = 1; /* Until we initialize everything, - * make sure we don't try logging - * anything */ - -extern volatile int error_log_cnt; - struct err_log_info { int error_type; unsigned int seq_num; @@ -636,16 +625,13 @@ void __exit nvram_cleanup(void) * sequence #: The unique sequence # for each event. (until it wraps) * error log: The error log from event_scan */ -int nvram_write_error_log(char * buff, int length, unsigned int err_type) +int nvram_write_error_log(char * buff, int length, + unsigned int err_type, unsigned int error_log_cnt) { int rc; loff_t tmp_index; struct err_log_info info; - if (no_logging) { - return -EPERM; - } - if (nvram_error_log_index == -1) { return -ESPIPE; } @@ -678,7 +664,8 @@ int nvram_write_error_log(char * buff, int length, unsigned int err_type) * * Reads nvram for error log for at most 'length' */ -int nvram_read_error_log(char * buff, int length, unsigned int * err_type) +int nvram_read_error_log(char * buff, int length, + unsigned int * err_type, unsigned int * error_log_cnt) { int rc; loff_t tmp_index; @@ -704,7 +691,7 @@ int nvram_read_error_log(char * buff, int length, unsigned int * err_type) return rc; } - error_log_cnt = info.seq_num; + *error_log_cnt = info.seq_num; *err_type = info.error_type; return 0; diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 04a3109ae3c6..0e2bee46304c 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -1457,8 +1457,8 @@ null_write_config(struct pci_bus *bus, unsigned int devfn, int offset, static struct pci_ops null_pci_ops = { - null_read_config, - null_write_config + .read = null_read_config, + .write = null_write_config, }; /* diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index a20f1951a5ce..430c502179c3 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -180,7 +180,7 @@ EXPORT_SYMBOL(cacheable_memcpy); EXPORT_SYMBOL(cpm_install_handler); EXPORT_SYMBOL(cpm_free_handler); #endif /* CONFIG_8xx */ -#if defined(CONFIG_8xx) || defined(CONFIG_40x) +#if defined(CONFIG_8xx) EXPORT_SYMBOL(__res); #endif diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index a38197b12d3e..0028fe68e09e 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -52,7 +52,6 @@ #include <asm/pSeries_reconfig.h> #include <asm/pci-bridge.h> #include <asm/kexec.h> -#include <asm/system.h> #ifdef DEBUG #define DBG(fmt...) printk(KERN_ERR fmt) diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index a1d582e38627..29c2160bcbb5 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -2046,6 +2046,7 @@ static void __init fixup_device_tree_maple(void) /* * Pegasos and BriQ lacks the "ranges" property in the isa node * Pegasos needs decimal IRQ 14/15, not hexadecimal + * Pegasos has the IDE configured in legacy mode, but advertised as native */ static void __init fixup_device_tree_chrp(void) { @@ -2083,9 +2084,13 @@ static void __init fixup_device_tree_chrp(void) prom_printf("Fixing up IDE interrupt on Pegasos...\n"); prop[0] = 14; prop[1] = 0x0; - prop[2] = 15; - prop[3] = 0x0; - prom_setprop(ph, name, "interrupts", prop, 4*sizeof(u32)); + prom_setprop(ph, name, "interrupts", prop, 2*sizeof(u32)); + prom_printf("Fixing up IDE class-code on Pegasos...\n"); + rc = prom_getprop(ph, "class-code", prop, sizeof(u32)); + if (rc == sizeof(u32)) { + prop[0] &= ~0x5; + prom_setprop(ph, name, "class-code", prop, sizeof(u32)); + } } } #else diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index a5de6211b97a..21f14e57d1f3 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -171,8 +171,8 @@ static int rtas_pci_write_config(struct pci_bus *bus, } struct pci_ops rtas_pci_ops = { - rtas_pci_read_config, - rtas_pci_write_config + .read = rtas_pci_read_config, + .write = rtas_pci_write_config, }; int is_python(struct device_node *dev) diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 7ec6ba56d83d..a288a5f2dbc6 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -18,13 +18,11 @@ #include <linux/cpu.h> #include <linux/console.h> -#include <asm/residual.h> #include <asm/io.h> #include <asm/prom.h> #include <asm/processor.h> #include <asm/pgtable.h> #include <asm/setup.h> -#include <asm/amigappc.h> #include <asm/smp.h> #include <asm/elf.h> #include <asm/cputable.h> diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 727a6699f2f4..b5944d8e3802 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -72,7 +72,6 @@ #include <asm/iseries/it_lp_queue.h> #include <asm/iseries/hv_call_xm.h> #endif -#include <asm/smp.h> /* keep track of when we need to update the rtc */ time_t last_rtc_update; @@ -867,7 +866,7 @@ void __init generic_calibrate_decr(void) "(not found)\n"); } -#ifdef CONFIG_BOOKE +#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) /* Set the time base to zero */ mtspr(SPRN_TBWL, 0); mtspr(SPRN_TBWU, 0); diff --git a/arch/powerpc/mm/4xx_mmu.c b/arch/powerpc/mm/40x_mmu.c index 7ff2609b64d1..e067df836be2 100644 --- a/arch/powerpc/mm/4xx_mmu.c +++ b/arch/powerpc/mm/40x_mmu.c @@ -108,7 +108,7 @@ unsigned long __init mmu_mapin_ram(void) pmd_t *pmdp; unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE; - pmdp = pmd_offset(pgd_offset_k(v), v); + pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v); pmd_val(*pmdp++) = val; pmd_val(*pmdp++) = val; pmd_val(*pmdp++) = val; @@ -123,7 +123,7 @@ unsigned long __init mmu_mapin_ram(void) pmd_t *pmdp; unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE; - pmdp = pmd_offset(pgd_offset_k(v), v); + pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v); pmd_val(*pmdp) = val; v += LARGE_PAGE_SIZE_4M; diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 7e4d27ad3dee..bf20fa688809 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_PPC64) += init_64.o pgtable_64.o mmu_context_64.o \ hash_utils_64.o hash_low_64.o tlb_64.o \ slb_low.o slb.o stab.o mmap.o $(hash-y) obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o hash_low_32.o tlb_32.o -obj-$(CONFIG_40x) += 4xx_mmu.o +obj-$(CONFIG_40x) += 40x_mmu.o obj-$(CONFIG_44x) += 44x_mmu.o obj-$(CONFIG_FSL_BOOKE) += fsl_booke_mmu.o obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index a47151e806ca..d525f2eba313 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -49,7 +49,6 @@ #include <asm/tlb.h> #include <asm/cacheflush.h> #include <asm/cputable.h> -#include <asm/abs_addr.h> #include <asm/sections.h> #include <asm/spu.h> @@ -602,13 +601,7 @@ static void demote_segment_4k(struct mm_struct *mm, unsigned long addr) { if (mm->context.user_psize == MMU_PAGE_4K) return; -#ifdef CONFIG_PPC_MM_SLICES slice_set_user_psize(mm, MMU_PAGE_4K); -#else /* CONFIG_PPC_MM_SLICES */ - mm->context.user_psize = MMU_PAGE_4K; - mm->context.sllp = SLB_VSID_USER | mmu_psize_defs[MMU_PAGE_4K].sllp; -#endif /* CONFIG_PPC_MM_SLICES */ - #ifdef CONFIG_SPU_BASE spu_flush_all_slbs(mm); #endif diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 4835f73af304..ba5f12a60467 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -22,11 +22,8 @@ #include <asm/mmu_context.h> #include <asm/machdep.h> #include <asm/cputable.h> -#include <asm/tlb.h> #include <asm/spu.h> -#include <linux/sysctl.h> - #define NUM_LOW_AREAS (0x100000000UL >> SID_SHIFT) #define NUM_HIGH_AREAS (PGTABLE_RANGE >> HTLB_AREA_SHIFT) diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index e1f5ded851f6..d65995ae8273 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -41,7 +41,6 @@ #include <asm/machdep.h> #include <asm/btext.h> #include <asm/tlb.h> -#include <asm/prom.h> #include <asm/lmb.h> #include <asm/sections.h> diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index f0e7eedb1ba3..32dcfc9b0082 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -42,7 +42,6 @@ #include <asm/machdep.h> #include <asm/btext.h> #include <asm/tlb.h> -#include <asm/prom.h> #include <asm/lmb.h> #include <asm/sections.h> #include <asm/vdso.h> diff --git a/arch/powerpc/mm/mmu_context_64.c b/arch/powerpc/mm/mmu_context_64.c index 7a78cdc0515a..1db38ba1f544 100644 --- a/arch/powerpc/mm/mmu_context_64.c +++ b/arch/powerpc/mm/mmu_context_64.c @@ -28,7 +28,6 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm) { int index; int err; - int new_context = (mm->context.id == 0); again: if (!idr_pre_get(&mmu_context_idr, GFP_KERNEL)) @@ -50,19 +49,13 @@ again: return -ENOMEM; } - mm->context.id = index; -#ifdef CONFIG_PPC_MM_SLICES /* The old code would re-promote on fork, we don't do that * when using slices as it could cause problem promoting slices * that have been forced down to 4K */ - if (new_context) + if (slice_mm_new_context(mm)) slice_set_user_psize(mm, mmu_virtual_psize); -#else - mm->context.user_psize = mmu_virtual_psize; - mm->context.sllp = SLB_VSID_USER | - mmu_psize_defs[mmu_virtual_psize].sllp; -#endif + mm->context.id = index; return 0; } diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c index d5fd3909d13a..319826ef1645 100644 --- a/arch/powerpc/mm/slice.c +++ b/arch/powerpc/mm/slice.c @@ -551,6 +551,7 @@ EXPORT_SYMBOL_GPL(get_slice_psize); * * This is also called in init_new_context() to change back the user * psize from whatever the parent context had it set to + * N.B. This may be called before mm->context.id has been set. * * This function will only change the content of the {low,high)_slice_psize * masks, it will not flush SLBs as this shall be handled lazily by the diff --git a/arch/powerpc/platforms/4xx/Kconfig b/arch/powerpc/platforms/40x/Kconfig index ded357c17414..c3dce3b3d524 100644 --- a/arch/powerpc/platforms/4xx/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -1,16 +1,3 @@ -config 4xx - bool - depends on 40x || 44x - default y - -config BOOKE - bool - depends on 44x - default y - -menu "AMCC 40x options" - depends on 40x - #config BUBINGA # bool "Bubinga" # depends on 40x @@ -66,13 +53,13 @@ menu "AMCC 40x options" # help # This option enables support for the IBM PPC405GPr evaluation board. -#config WALNUT -# bool "Walnut" -# depends on 40x -# default y -# select 405GP -# help -# This option enables support for the IBM PPC405GP evaluation board. +config WALNUT + bool "Walnut" + depends on 40x + default y + select 405GP + help + This option enables support for the IBM PPC405GP evaluation board. #config XILINX_ML300 # bool "Xilinx-ML300" @@ -82,8 +69,6 @@ menu "AMCC 40x options" # help # This option enables support for the Xilinx ML300 evaluation board. -endmenu - # 40x specific CPU modules, selected based on the board above. config NP405H bool @@ -126,68 +111,6 @@ config IBM405_ERR77 config IBM405_ERR51 bool -menu "AMCC 44x options" - depends on 44x - -#config BAMBOO -# bool "Bamboo" -# depends on 44x -# default n -# select 440EP -# help -# This option enables support for the IBM PPC440EP evaluation board. - -config EBONY - bool "Ebony" - depends on 44x - default y - select 440GP - help - This option enables support for the IBM PPC440GP evaluation board. - -#config LUAN -# bool "Luan" -# depends on 44x -# default n -# select 440SP -# help -# This option enables support for the IBM PPC440SP evaluation board. - -#config OCOTEA -# bool "Ocotea" -# depends on 44x -# default n -# select 440GX -# help -# This option enables support for the IBM PPC440GX evaluation board. - -endmenu - -# 44x specific CPU modules, selected based on the board above. -config 440EP - bool - select PPC_FPU - select IBM440EP_ERR42 - -config 440GP - bool - select IBM_NEW_EMAC_ZMII - -config 440GX - bool - -config 440SP - bool - -config 440A - bool - depends on 440GX - default y - -# 44x errata/workaround config symbols, selected by the CPU models above -config IBM440EP_ERR42 - bool - #config XILINX_OCP # bool # depends on XILINX_ML300 diff --git a/arch/powerpc/platforms/40x/Makefile b/arch/powerpc/platforms/40x/Makefile new file mode 100644 index 000000000000..e6c0bbd063a4 --- /dev/null +++ b/arch/powerpc/platforms/40x/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_WALNUT) += walnut.o diff --git a/arch/powerpc/platforms/40x/walnut.c b/arch/powerpc/platforms/40x/walnut.c new file mode 100644 index 000000000000..c17fdf23b492 --- /dev/null +++ b/arch/powerpc/platforms/40x/walnut.c @@ -0,0 +1,68 @@ +/* + * Architecture- / platform-specific boot-time initialization code for + * IBM PowerPC 4xx based boards. Adapted from original + * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek + * <dan@net4x.com>. + * + * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu> + * + * Rewritten and ported to the merged powerpc tree: + * Copyright 2007 IBM Corporation + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * 2002 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include <linux/init.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/of_platform.h> + +static struct of_device_id walnut_of_bus[] = { + { .compatible = "ibm,plb3", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +static int __init walnut_device_probe(void) +{ + if (!machine_is(walnut)) + return 0; + + /* FIXME: do bus probe here */ + of_platform_bus_probe(NULL, walnut_of_bus, NULL); + + return 0; +} +device_initcall(walnut_device_probe); + +static int __init walnut_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "ibm,walnut")) + return 0; + + return 1; +} + +static void __init walnut_setup_arch(void) +{ +} + +define_machine(walnut) { + .name = "Walnut", + .probe = walnut_probe, + .setup_arch = walnut_setup_arch, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 1b3e008fd148..f28acdcbd6c9 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -1,10 +1,10 @@ -#config BAMBOO -# bool "Bamboo" -# depends on 44x -# default n -# select 440EP -# help -# This option enables support for the IBM PPC440EP evaluation board. +config BAMBOO + bool "Bamboo" + depends on 44x + default n + select 440EP + help + This option enables support for the IBM PPC440EP evaluation board. config EBONY bool "Ebony" @@ -14,6 +14,14 @@ config EBONY help This option enables support for the IBM PPC440GP evaluation board. +config SEQUOIA + bool "Sequoia" + depends on 44x + default n + select 440EPX + help + This option enables support for the AMCC PPC440EPX evaluation board. + #config LUAN # bool "Luan" # depends on 44x @@ -35,6 +43,14 @@ config 440EP bool select PPC_FPU select IBM440EP_ERR42 +# select IBM_NEW_EMAC_ZMII + +config 440EPX + bool + select PPC_FPU +# Disabled until the new EMAC Driver is merged. +# select IBM_NEW_EMAC_EMAC4 +# select IBM_NEW_EMAC_ZMII config 440GP bool @@ -49,7 +65,7 @@ config 440SP config 440A bool - depends on 440GX + depends on 440GX || 440EPX default y # 44x errata/workaround config symbols, selected by the CPU models above diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 41d0a18a0e44..10ce6740cc7d 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -1,2 +1,4 @@ obj-$(CONFIG_44x) := misc_44x.o obj-$(CONFIG_EBONY) += ebony.o +obj-$(CONFIG_BAMBOO) += bamboo.o +obj-$(CONFIG_SEQUOIA) += sequoia.o diff --git a/arch/powerpc/platforms/44x/bamboo.c b/arch/powerpc/platforms/44x/bamboo.c new file mode 100644 index 000000000000..9bc45dea078f --- /dev/null +++ b/arch/powerpc/platforms/44x/bamboo.c @@ -0,0 +1,66 @@ +/* + * Bamboo board specific routines + * + * Wade Farnsworth <wfarnsworth@mvista.com> + * Copyright 2004 MontaVista Software Inc. + * + * Rewritten and ported to the merged powerpc tree: + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * Copyright 2007 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/init.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/of_platform.h> +#include "44x.h" + +static struct of_device_id bamboo_of_bus[] = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +static int __init bamboo_device_probe(void) +{ + if (!machine_is(bamboo)) + return 0; + + of_platform_bus_probe(NULL, bamboo_of_bus, NULL); + + return 0; +} +device_initcall(bamboo_device_probe); + +static int __init bamboo_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "amcc,bamboo")) + return 0; + + return 1; +} + +static void __init bamboo_setup_arch(void) +{ +} + +define_machine(bamboo) { + .name = "Bamboo", + .probe = bamboo_probe, + .setup_arch = bamboo_setup_arch, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc44x_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/44x/sequoia.c b/arch/powerpc/platforms/44x/sequoia.c new file mode 100644 index 000000000000..7d0d9d567d25 --- /dev/null +++ b/arch/powerpc/platforms/44x/sequoia.c @@ -0,0 +1,66 @@ +/* + * Sequoia board specific routines + * + * Valentine Barshak <vbarshak@ru.mvista.com> + * Copyright 2007 MontaVista Software Inc. + * + * Based on the Bamboo code by + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * Copyright 2007 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/init.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/of_platform.h> +#include "44x.h" + +static struct of_device_id sequoia_of_bus[] = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +static int __init sequoia_device_probe(void) +{ + if (!machine_is(sequoia)) + return 0; + + of_platform_bus_probe(NULL, sequoia_of_bus, NULL); + + return 0; +} +device_initcall(sequoia_device_probe); + +static int __init sequoia_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "amcc,sequoia")) + return 0; + + return 1; +} + +static void __init sequoia_setup_arch(void) +{ +} + +define_machine(sequoia) { + .name = "Sequoia", + .probe = sequoia_probe, + .setup_arch = sequoia_setup_arch, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc44x_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/4xx/Makefile b/arch/powerpc/platforms/4xx/Makefile deleted file mode 100644 index 79ff6b1e887c..000000000000 --- a/arch/powerpc/platforms/4xx/Makefile +++ /dev/null @@ -1 +0,0 @@ -# empty makefile so make clean works
\ No newline at end of file diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c index 4be6e7a17b66..4263158b3274 100644 --- a/arch/powerpc/platforms/52xx/efika.c +++ b/arch/powerpc/platforms/52xx/efika.c @@ -78,8 +78,8 @@ static int rtas_write_config(struct pci_bus *bus, unsigned int devfn, } static struct pci_ops rtas_pci_ops = { - rtas_read_config, - rtas_write_config + .read = rtas_read_config, + .write = rtas_write_config, }; diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c index 5c46e898fd45..ce3f6951828e 100644 --- a/arch/powerpc/platforms/52xx/lite5200.c +++ b/arch/powerpc/platforms/52xx/lite5200.c @@ -35,7 +35,6 @@ #include <asm/io.h> #include <asm/machdep.h> #include <asm/ipic.h> -#include <asm/bootinfo.h> #include <asm/irq.h> #include <asm/prom.h> #include <asm/udbg.h> @@ -109,22 +108,13 @@ static void lite5200_resume_finish(void __iomem *mbar) static void __init lite5200_setup_arch(void) { +#ifdef CONFIG_PCI struct device_node *np; +#endif if (ppc_md.progress) ppc_md.progress("lite5200_setup_arch()", 0); - np = of_find_node_by_type(NULL, "cpu"); - if (np) { - const unsigned int *fp = - of_get_property(np, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(np); - } - /* CPU & Port mux setup */ mpc52xx_setup_cpu(); /* Generic */ lite5200_setup_cpu(); /* Platorm specific */ diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c index fbfff95b4437..8c464c55b5d0 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c @@ -22,7 +22,6 @@ #include <linux/init.h> #include <linux/sched.h> #include <linux/signal.h> -#include <linux/stddef.h> #include <linux/delay.h> #include <linux/irq.h> #include <linux/hardirq.h> diff --git a/arch/powerpc/platforms/82xx/m82xx_pci.h b/arch/powerpc/platforms/82xx/m82xx_pci.h index 9cd8893b5a32..65e38a7ff48f 100644 --- a/arch/powerpc/platforms/82xx/m82xx_pci.h +++ b/arch/powerpc/platforms/82xx/m82xx_pci.h @@ -8,8 +8,6 @@ * 2 of the License, or (at your option) any later version. */ -#include <asm/m8260_pci.h> - #define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET) #ifndef _IO_BASE diff --git a/arch/powerpc/platforms/82xx/mpc82xx.c b/arch/powerpc/platforms/82xx/mpc82xx.c index cc9900d2e5ee..c706871aec1a 100644 --- a/arch/powerpc/platforms/82xx/mpc82xx.c +++ b/arch/powerpc/platforms/82xx/mpc82xx.c @@ -36,7 +36,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/bootinfo.h> #include <asm/pci-bridge.h> #include <asm/mpc8260.h> #include <asm/irq.h> diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c index 2d1b05b9f8ef..c0a0c56ac5b3 100644 --- a/arch/powerpc/platforms/82xx/mpc82xx_ads.c +++ b/arch/powerpc/platforms/82xx/mpc82xx_ads.c @@ -37,7 +37,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/bootinfo.h> #include <asm/pci-bridge.h> #include <asm/mpc8260.h> #include <asm/irq.h> diff --git a/arch/powerpc/platforms/82xx/pq2ads.h b/arch/powerpc/platforms/82xx/pq2ads.h index 5b5cca6c8c88..6f749b76dd8f 100644 --- a/arch/powerpc/platforms/82xx/pq2ads.h +++ b/arch/powerpc/platforms/82xx/pq2ads.h @@ -23,7 +23,6 @@ #define __MACH_ADS8260_DEFS #include <linux/seq_file.h> -#include <asm/ppcboot.h> /* For our show_cpuinfo hooks. */ #define CPUINFO_VENDOR "Freescale Semiconductor" diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index 2c8e641a739b..61e3f1cb0a7e 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -32,7 +32,6 @@ #include <asm/io.h> #include <asm/machdep.h> #include <asm/ipic.h> -#include <asm/bootinfo.h> #include <asm/irq.h> #include <asm/prom.h> #include <asm/udbg.h> diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 47ba5446f63c..6d06645e5ba8 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -30,7 +30,6 @@ #include <asm/io.h> #include <asm/machdep.h> #include <asm/ipic.h> -#include <asm/bootinfo.h> #include <asm/irq.h> #include <asm/prom.h> #include <asm/udbg.h> diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c index 4c9ff9cadfe4..f8aba9a488bc 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -30,7 +30,6 @@ #include <asm/io.h> #include <asm/machdep.h> #include <asm/ipic.h> -#include <asm/bootinfo.h> #include <asm/irq.h> #include <asm/prom.h> #include <asm/udbg.h> diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c index 84b58934aafd..69970b910c12 100644 --- a/arch/powerpc/platforms/83xx/mpc836x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c @@ -38,7 +38,6 @@ #include <asm/io.h> #include <asm/machdep.h> #include <asm/ipic.h> -#include <asm/bootinfo.h> #include <asm/irq.h> #include <asm/prom.h> #include <asm/udbg.h> diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 2d4cb7847604..b46c8d50f6d1 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -35,7 +35,6 @@ #include <asm/io.h> #include <asm/machdep.h> #include <asm/ipic.h> -#include <asm/bootinfo.h> #include <asm/pci-bridge.h> #include <asm/mpc85xx.h> #include <asm/irq.h> diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 7ca7e676f1c4..66366a023820 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -38,7 +38,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/bootinfo.h> #include <asm/pci-bridge.h> #include <asm/mpc85xx.h> #include <asm/irq.h> diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c index f1693550c70c..b2b98dd8be6a 100644 --- a/arch/powerpc/platforms/8xx/m8xx_setup.c +++ b/arch/powerpc/platforms/8xx/m8xx_setup.c @@ -36,13 +36,11 @@ #include <asm/mmu.h> #include <asm/reg.h> -#include <asm/residual.h> #include <asm/io.h> #include <asm/pgtable.h> #include <asm/mpc8xx.h> #include <asm/8xx_immap.h> #include <asm/machdep.h> -#include <asm/bootinfo.h> #include <asm/time.h> #include <asm/prom.h> #include <asm/fs_pd.h> @@ -55,7 +53,9 @@ struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops; #endif void m8xx_calibrate_decr(void); +#ifdef CONFIG_8xx_WDT extern void m8xx_wdt_handler_install(bd_t *bp); +#endif extern int cpm_pic_init(void); extern int cpm_get_irq(void); @@ -89,24 +89,24 @@ init_internal_rtc(void) static int __init get_freq(char *name, unsigned long *val) { - struct device_node *cpu; - const unsigned int *fp; - int found = 0; + struct device_node *cpu; + const unsigned int *fp; + int found = 0; - /* The cpu node should have timebase and clock frequency properties */ - cpu = of_find_node_by_type(NULL, "cpu"); + /* The cpu node should have timebase and clock frequency properties */ + cpu = of_find_node_by_type(NULL, "cpu"); - if (cpu) { - fp = of_get_property(cpu, name, NULL); - if (fp) { - found = 1; - *val = *fp; - } + if (cpu) { + fp = of_get_property(cpu, name, NULL); + if (fp) { + found = 1; + *val = *fp; + } - of_node_put(cpu); - } + of_node_put(cpu); + } - return found; + return found; } /* The decrementer counts at the system (internal) clock frequency divided by @@ -122,7 +122,7 @@ void __init mpc8xx_calibrate_decr(void) sit8xx_t *sys_tmr2; int irq, virq; - clk_r1 = (cark8xx_t *) immr_map(im_clkrstk); + clk_r1 = (cark8xx_t *) immr_map(im_clkrstk); /* Unlock the SCCR. */ out_be32(&clk_r1->cark_sccrk, ~KAPWR_KEY); @@ -130,24 +130,24 @@ void __init mpc8xx_calibrate_decr(void) immr_unmap(clk_r1); /* Force all 8xx processors to use divide by 16 processor clock. */ - clk_r2 = (car8xx_t *) immr_map(im_clkrst); + clk_r2 = (car8xx_t *) immr_map(im_clkrst); setbits32(&clk_r2->car_sccr, 0x02000000); immr_unmap(clk_r2); /* Processor frequency is MHz. */ - ppc_tb_freq = 50000000; - if (!get_freq("bus-frequency", &ppc_tb_freq)) { - printk(KERN_ERR "WARNING: Estimating decrementer frequency " - "(not found)\n"); - } - ppc_tb_freq /= 16; - ppc_proc_freq = 50000000; - if (!get_freq("clock-frequency", &ppc_proc_freq)) - printk(KERN_ERR "WARNING: Estimating processor frequency" - "(not found)\n"); - - printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq); + ppc_tb_freq = 50000000; + if (!get_freq("bus-frequency", &ppc_tb_freq)) { + printk(KERN_ERR "WARNING: Estimating decrementer frequency " + "(not found)\n"); + } + ppc_tb_freq /= 16; + ppc_proc_freq = 50000000; + if (!get_freq("clock-frequency", &ppc_proc_freq)) + printk(KERN_ERR "WARNING: Estimating processor frequency" + "(not found)\n"); + + printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq); /* Perform some more timer/timebase initialization. This used * to be done elsewhere, but other changes caused it to get @@ -164,7 +164,7 @@ void __init mpc8xx_calibrate_decr(void) * we guarantee the registers are locked, then we unlock them * for our use. */ - sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk); + sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk); out_be32(&sys_tmr1->sitk_tbscrk, ~KAPWR_KEY); out_be32(&sys_tmr1->sitk_rtcsck, ~KAPWR_KEY); out_be32(&sys_tmr1->sitk_tbk, ~KAPWR_KEY); @@ -180,8 +180,8 @@ void __init mpc8xx_calibrate_decr(void) * we have to enable the timebase). The decrementer interrupt * is wired into the vector table, nothing to do here for that. */ - cpu = of_find_node_by_type(NULL, "cpu"); - virq= irq_of_parse_and_map(cpu, 0); + cpu = of_find_node_by_type(NULL, "cpu"); + virq= irq_of_parse_and_map(cpu, 0); irq = irq_map[virq].hwirq; sys_tmr2 = (sit8xx_t *) immr_map(im_sit); @@ -211,10 +211,10 @@ int mpc8xx_set_rtc_time(struct rtc_time *tm) sit8xx_t *sys_tmr2; int time; - sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk); + sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk); sys_tmr2 = (sit8xx_t *) immr_map(im_sit); time = mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday, - tm->tm_hour, tm->tm_min, tm->tm_sec); + tm->tm_hour, tm->tm_min, tm->tm_sec); out_be32(&sys_tmr1->sitk_rtck, KAPWR_KEY); out_be32(&sys_tmr2->sit_rtc, time); @@ -233,8 +233,8 @@ void mpc8xx_get_rtc_time(struct rtc_time *tm) /* Get time from the RTC. */ data = in_be32(&sys_tmr->sit_rtc); to_tm(data, tm); - tm->tm_year -= 1900; - tm->tm_mon -= 1; + tm->tm_year -= 1900; + tm->tm_mon -= 1; immr_unmap(sys_tmr); return; } @@ -298,7 +298,7 @@ void __init m8xx_pic_init(void) int irq; if (mpc8xx_pic_init()) { - printk(KERN_ERR "Failed interrupt 8xx controller initialization\n"); + printk(KERN_ERR "Failed interrupt 8xx controller initialization\n"); return; } diff --git a/arch/powerpc/platforms/8xx/mpc86xads.h b/arch/powerpc/platforms/8xx/mpc86xads.h index 59bad2f9ae51..dd10cd20b6a7 100644 --- a/arch/powerpc/platforms/8xx/mpc86xads.h +++ b/arch/powerpc/platforms/8xx/mpc86xads.h @@ -15,7 +15,6 @@ #ifndef __ASM_MPC86XADS_H__ #define __ASM_MPC86XADS_H__ -#include <asm/ppcboot.h> #include <sysdev/fsl_soc.h> /* U-Boot maps BCSR to 0xff080000 */ diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c index cf0e7bc8c2e7..8f64f48698ab 100644 --- a/arch/powerpc/platforms/8xx/mpc86xads_setup.c +++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c @@ -31,7 +31,6 @@ #include <asm/processor.h> #include <asm/system.h> #include <asm/time.h> -#include <asm/ppcboot.h> #include <asm/mpc8xx.h> #include <asm/8xx_immap.h> #include <asm/commproc.h> @@ -254,20 +253,6 @@ int platform_device_skip(const char *model, int id) static void __init mpc86xads_setup_arch(void) { - struct device_node *cpu; - - cpu = of_find_node_by_type(NULL, "cpu"); - if (cpu != 0) { - const unsigned int *fp; - - fp = of_get_property(cpu, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(cpu); - } - cpm_reset(); mpc86xads_board_setup(); diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/platforms/8xx/mpc885ads.h index 7c31aec284c2..14db12417064 100644 --- a/arch/powerpc/platforms/8xx/mpc885ads.h +++ b/arch/powerpc/platforms/8xx/mpc885ads.h @@ -15,7 +15,6 @@ #ifndef __ASM_MPC885ADS_H__ #define __ASM_MPC885ADS_H__ -#include <asm/ppcboot.h> #include <sysdev/fsl_soc.h> /* U-Boot maps BCSR to 0xff080000 */ diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c index 5a808d611ae3..d3da38586b04 100644 --- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c +++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c @@ -32,7 +32,6 @@ #include <asm/processor.h> #include <asm/system.h> #include <asm/time.h> -#include <asm/ppcboot.h> #include <asm/mpc8xx.h> #include <asm/8xx_immap.h> #include <asm/commproc.h> @@ -406,20 +405,6 @@ int platform_device_skip(const char *model, int id) static void __init mpc885ads_setup_arch(void) { - struct device_node *cpu; - - cpu = of_find_node_by_type(NULL, "cpu"); - if (cpu != 0) { - const unsigned int *fp; - - fp = of_get_property(cpu, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(cpu); - } - cpm_reset(); mpc885ads_board_setup(); diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 19d4628edf79..065f3b19d6c7 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -19,6 +19,7 @@ config EMBEDDED6xx config PPC_82xx bool "Freescale 82xx" depends on 6xx + select WANT_DEVICE_TREE config PPC_83xx bool "Freescale 83xx" @@ -58,7 +59,7 @@ source "arch/powerpc/platforms/85xx/Kconfig" source "arch/powerpc/platforms/86xx/Kconfig" source "arch/powerpc/platforms/embedded6xx/Kconfig" source "arch/powerpc/platforms/44x/Kconfig" -#source "arch/powerpc/platforms/4xx/Kconfig +source "arch/powerpc/platforms/40x/Kconfig" config PPC_NATIVE bool diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index e4b2aee53a73..86eb4cf31f0b 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -36,10 +36,12 @@ config PPC_8xx bool "Freescale 8xx" select FSL_SOC select 8xx + select WANT_DEVICE_TREE config 40x bool "AMCC 40x" select PPC_DCR_NATIVE + select WANT_DEVICE_TREE config 44x bool "AMCC 44x" diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index d44e832b01f2..6d9079da5f5a 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -9,7 +9,7 @@ obj-$(CONFIG_PPC_PMAC) += powermac/ endif endif obj-$(CONFIG_PPC_CHRP) += chrp/ -#obj-$(CONFIG_4xx) += 4xx/ +obj-$(CONFIG_40x) += 40x/ obj-$(CONFIG_44x) += 44x/ obj-$(CONFIG_PPC_MPC52xx) += 52xx/ obj-$(CONFIG_PPC_8xx) += 8xx/ diff --git a/arch/powerpc/platforms/celleb/pci.c b/arch/powerpc/platforms/celleb/pci.c index e9ac19c4bba4..11336b40feca 100644 --- a/arch/powerpc/platforms/celleb/pci.c +++ b/arch/powerpc/platforms/celleb/pci.c @@ -242,8 +242,8 @@ static int celleb_fake_pci_write_config(struct pci_bus *bus, } static struct pci_ops celleb_fake_pci_ops = { - celleb_fake_pci_read_config, - celleb_fake_pci_write_config + .read = celleb_fake_pci_read_config, + .write = celleb_fake_pci_write_config, }; static inline void celleb_setup_pci_base_addrs(struct pci_controller *hose, @@ -288,8 +288,8 @@ static inline void celleb_setup_pci_base_addrs(struct pci_controller *hose, celleb_config_write_fake(config, PCI_COMMAND, 2, val); } -static int __devinit celleb_setup_fake_pci_device(struct device_node *node, - struct pci_controller *hose) +static int __init celleb_setup_fake_pci_device(struct device_node *node, + struct pci_controller *hose) { unsigned int rlen; int num_base_addr = 0; @@ -418,8 +418,8 @@ error: return 1; } -static int __devinit phb_set_bus_ranges(struct device_node *dev, - struct pci_controller *phb) +static int __init phb_set_bus_ranges(struct device_node *dev, + struct pci_controller *phb) { const int *bus_range; unsigned int len; @@ -434,7 +434,7 @@ static int __devinit phb_set_bus_ranges(struct device_node *dev, return 0; } -static void __devinit celleb_alloc_private_mem(struct pci_controller *hose) +static void __init celleb_alloc_private_mem(struct pci_controller *hose) { if (mem_init_done) hose->private_data = @@ -444,7 +444,7 @@ static void __devinit celleb_alloc_private_mem(struct pci_controller *hose) alloc_bootmem(sizeof(struct celleb_pci_private)); } -int __devinit celleb_setup_phb(struct pci_controller *phb) +int __init celleb_setup_phb(struct pci_controller *phb) { const char *name; struct device_node *dev = phb->arch_data; diff --git a/arch/powerpc/platforms/celleb/scc_epci.c b/arch/powerpc/platforms/celleb/scc_epci.c index c4b011094bd6..506fc8447554 100644 --- a/arch/powerpc/platforms/celleb/scc_epci.c +++ b/arch/powerpc/platforms/celleb/scc_epci.c @@ -278,12 +278,12 @@ static int celleb_epci_write_config(struct pci_bus *bus, } struct pci_ops celleb_epci_ops = { - celleb_epci_read_config, - celleb_epci_write_config, + .read = celleb_epci_read_config, + .write = celleb_epci_write_config, }; /* to be moved in FW */ -static int __devinit celleb_epci_init(struct pci_controller *hose) +static int __init celleb_epci_init(struct pci_controller *hose) { u32 val; volatile void __iomem *reg, *epci_base; @@ -403,7 +403,7 @@ static int __devinit celleb_epci_init(struct pci_controller *hose) return 0; } -int __devinit celleb_setup_epci(struct device_node *node, +int __init celleb_setup_epci(struct device_node *node, struct pci_controller *hose) { struct resource r; diff --git a/arch/powerpc/platforms/celleb/scc_sio.c b/arch/powerpc/platforms/celleb/scc_sio.c index bcd25f54d986..bb98735ac46f 100644 --- a/arch/powerpc/platforms/celleb/scc_sio.c +++ b/arch/powerpc/platforms/celleb/scc_sio.c @@ -28,18 +28,18 @@ /* sio irq0=0xb00010022 irq0=0xb00010023 irq2=0xb00010024 mmio=0xfff000-0x1000,0xff2000-0x1000 */ -static int txx9_serial_bitmap = 0; +static int txx9_serial_bitmap __initdata = 0; static struct { uint32_t offset; uint32_t index; -} txx9_scc_tab[3] = { +} txx9_scc_tab[3] __initdata = { { 0x300, 0 }, /* 0xFFF300 */ { 0x400, 0 }, /* 0xFFF400 */ { 0x800, 1 } /* 0xFF2800 */ }; -static int txx9_serial_init(void) +static int __init txx9_serial_init(void) { extern int early_serial_txx9_setup(struct uart_port *port); struct device_node *node; @@ -79,7 +79,7 @@ static int txx9_serial_init(void) return 0; } -static int txx9_serial_config(char *ptr) +static int __init txx9_serial_config(char *ptr) { int i; diff --git a/arch/powerpc/platforms/celleb/setup.c b/arch/powerpc/platforms/celleb/setup.c index 5e9f7f163571..1fca3f23533b 100644 --- a/arch/powerpc/platforms/celleb/setup.c +++ b/arch/powerpc/platforms/celleb/setup.c @@ -73,7 +73,7 @@ static void celleb_show_cpuinfo(struct seq_file *m) of_node_put(root); } -static int celleb_machine_type_hack(char *ptr) +static int __init celleb_machine_type_hack(char *ptr) { strncpy(celleb_machine_type, ptr, sizeof(celleb_machine_type)); celleb_machine_type[sizeof(celleb_machine_type)-1] = 0; @@ -135,7 +135,7 @@ static void celleb_kexec_cpu_down(int crash, int secondary) } #endif -static struct of_device_id celleb_bus_ids[] = { +static struct of_device_id celleb_bus_ids[] __initdata = { { .type = "scc", }, { .type = "ioif", }, /* old style */ {}, diff --git a/arch/powerpc/platforms/chrp/gg2.h b/arch/powerpc/platforms/chrp/gg2.h new file mode 100644 index 000000000000..341ae55b99fb --- /dev/null +++ b/arch/powerpc/platforms/chrp/gg2.h @@ -0,0 +1,61 @@ +/* + * include/asm-ppc/gg2.h -- VLSI VAS96011/12 `Golden Gate 2' register definitions + * + * Copyright (C) 1997 Geert Uytterhoeven + * + * This file is based on the following documentation: + * + * The VAS96011/12 Chipset, Data Book, Edition 1.0 + * VLSI Technology, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef _ASMPPC_GG2_H +#define _ASMPPC_GG2_H + + /* + * Memory Map (CHRP mode) + */ + +#define GG2_PCI_MEM_BASE 0xc0000000 /* Peripheral memory space */ +#define GG2_ISA_MEM_BASE 0xf7000000 /* Peripheral memory alias */ +#define GG2_ISA_IO_BASE 0xf8000000 /* Peripheral I/O space */ +#define GG2_PCI_CONFIG_BASE 0xfec00000 /* PCI configuration space */ +#define GG2_INT_ACK_SPECIAL 0xfec80000 /* Interrupt acknowledge and */ + /* special PCI cycles */ +#define GG2_ROM_BASE0 0xff000000 /* ROM bank 0 */ +#define GG2_ROM_BASE1 0xff800000 /* ROM bank 1 */ + + + /* + * GG2 specific PCI Registers + */ + +extern void __iomem *gg2_pci_config_base; /* kernel virtual address */ + +#define GG2_PCI_BUSNO 0x40 /* Bus number */ +#define GG2_PCI_SUBBUSNO 0x41 /* Subordinate bus number */ +#define GG2_PCI_DISCCTR 0x42 /* Disconnect counter */ +#define GG2_PCI_PPC_CTRL 0x50 /* PowerPC interface control register */ +#define GG2_PCI_ADDR_MAP 0x5c /* Address map */ +#define GG2_PCI_PCI_CTRL 0x60 /* PCI interface control register */ +#define GG2_PCI_ROM_CTRL 0x70 /* ROM interface control register */ +#define GG2_PCI_ROM_TIME 0x74 /* ROM timing */ +#define GG2_PCI_CC_CTRL 0x80 /* Cache controller control register */ +#define GG2_PCI_DRAM_BANK0 0x90 /* Control register for DRAM bank #0 */ +#define GG2_PCI_DRAM_BANK1 0x94 /* Control register for DRAM bank #1 */ +#define GG2_PCI_DRAM_BANK2 0x98 /* Control register for DRAM bank #2 */ +#define GG2_PCI_DRAM_BANK3 0x9c /* Control register for DRAM bank #3 */ +#define GG2_PCI_DRAM_BANK4 0xa0 /* Control register for DRAM bank #4 */ +#define GG2_PCI_DRAM_BANK5 0xa4 /* Control register for DRAM bank #5 */ +#define GG2_PCI_DRAM_TIME0 0xb0 /* Timing parameters set #0 */ +#define GG2_PCI_DRAM_TIME1 0xb4 /* Timing parameters set #1 */ +#define GG2_PCI_DRAM_CTRL 0xc0 /* DRAM control */ +#define GG2_PCI_ERR_CTRL 0xd0 /* Error control register */ +#define GG2_PCI_ERR_STATUS 0xd4 /* Error status register */ + /* Cleared when read */ + +#endif /* _ASMPPC_GG2_H */ diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c index 28d1647b204e..e43465d34d29 100644 --- a/arch/powerpc/platforms/chrp/pci.c +++ b/arch/powerpc/platforms/chrp/pci.c @@ -13,7 +13,6 @@ #include <asm/irq.h> #include <asm/hydra.h> #include <asm/prom.h> -#include <asm/gg2.h> #include <asm/machdep.h> #include <asm/sections.h> #include <asm/pci-bridge.h> @@ -21,6 +20,7 @@ #include <asm/rtas.h> #include "chrp.h" +#include "gg2.h" /* LongTrail */ void __iomem *gg2_pci_config_base; @@ -86,8 +86,8 @@ int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off, static struct pci_ops gg2_pci_ops = { - gg2_read_config, - gg2_write_config + .read = gg2_read_config, + .write = gg2_write_config, }; /* @@ -124,8 +124,8 @@ int rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset, static struct pci_ops rtas_pci_ops = { - rtas_read_config, - rtas_write_config + .read = rtas_read_config, + .write = rtas_write_config, }; volatile struct Hydra __iomem *Hydra = NULL; @@ -338,3 +338,32 @@ void chrp_pci_fixup_winbond_ata(struct pci_dev *sl82c105) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105, chrp_pci_fixup_winbond_ata); + +/* Pegasos2 firmware version 20040810 configures the built-in IDE controller + * in legacy mode, but sets the PCI registers to PCI native mode. + * The chip can only operate in legacy mode, so force the PCI class into legacy + * mode as well. The same fixup must be done to the class-code property in + * the IDE node /pci@80000000/ide@C,1 + */ +static void chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide) +{ + u8 progif; + struct pci_dev *viaisa; + + if (!machine_is(chrp) || _chrp_type != _CHRP_Pegasos) + return; + if (viaide->irq != 14) + return; + + viaisa = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL); + if (!viaisa) + return; + printk("Fixing VIA IDE, force legacy mode on '%s'\n", viaide->dev.bus_id); + + pci_read_config_byte(viaide, PCI_CLASS_PROG, &progif); + pci_write_config_byte(viaide, PCI_CLASS_PROG, progif & ~0x5); + viaide->class &= ~0x5; + + pci_dev_put(viaisa); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, chrp_pci_fixup_vt8231_ata); diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 373de4c063db..96498ad7b943 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -32,13 +32,11 @@ #include <linux/seq_file.h> #include <linux/root_dev.h> #include <linux/initrd.h> -#include <linux/module.h> #include <linux/timer.h> #include <asm/io.h> #include <asm/pgtable.h> #include <asm/prom.h> -#include <asm/gg2.h> #include <asm/pci-bridge.h> #include <asm/dma.h> #include <asm/machdep.h> @@ -52,6 +50,7 @@ #include <asm/xmon.h> #include "chrp.h" +#include "gg2.h" void rtas_indicator_progress(char *, unsigned short); diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c index 3ea0eb78568e..10a4a4d063b6 100644 --- a/arch/powerpc/platforms/chrp/smp.c +++ b/arch/powerpc/platforms/chrp/smp.c @@ -26,10 +26,8 @@ #include <asm/io.h> #include <asm/prom.h> #include <asm/smp.h> -#include <asm/residual.h> #include <asm/time.h> #include <asm/machdep.h> -#include <asm/smp.h> #include <asm/mpic.h> #include <asm/rtas.h> diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c index 6292e36dc577..b6de2b5223dd 100644 --- a/arch/powerpc/platforms/embedded6xx/holly.c +++ b/arch/powerpc/platforms/embedded6xx/holly.c @@ -113,23 +113,11 @@ static void holly_remap_bridge(void) static void __init holly_setup_arch(void) { - struct device_node *cpu; struct device_node *np; if (ppc_md.progress) ppc_md.progress("holly_setup_arch():set_bridge", 0); - cpu = of_find_node_by_type(NULL, "cpu"); - if (cpu) { - const unsigned int *fp; - - fp = of_get_property(cpu, "clock-frequency", NULL); - if (fp) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(cpu); - } tsi108_csr_vir_base = get_vir_csrbase(); /* setup PCI host bridge */ @@ -147,7 +135,7 @@ static void __init holly_setup_arch(void) } /* - * Interrupt setup and service. Interrrupts on the holly come + * Interrupt setup and service. Interrupts on the holly come * from the four external INT pins, PCI interrupts are routed via * PCI interrupt control registers, it generates internal IRQ23 * diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index bd5ca58345a1..61ca02c2d644 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -18,9 +18,10 @@ #include <asm/time.h> #include <asm/prom.h> #include <asm/mpic.h> -#include <asm/mpc10x.h> #include <asm/pci-bridge.h> +#include "mpc10x.h" + static struct mtd_partition linkstation_physmap_partitions[] = { { .name = "mtd_firmimg", @@ -99,7 +100,7 @@ static void __init linkstation_setup_arch(void) } /* - * Interrupt setup and service. Interrrupts on the linkstation come + * Interrupt setup and service. Interrupts on the linkstation come * from the four PCI slots plus onboard 8241 devices: I2C, DUART. */ static void __init linkstation_init_IRQ(void) diff --git a/arch/powerpc/platforms/embedded6xx/ls_uart.c b/arch/powerpc/platforms/embedded6xx/ls_uart.c index d0bee9f19e4e..0d9f1500a671 100644 --- a/arch/powerpc/platforms/embedded6xx/ls_uart.c +++ b/arch/powerpc/platforms/embedded6xx/ls_uart.c @@ -4,11 +4,11 @@ #include <linux/serial_reg.h> #include <linux/serial_8250.h> #include <asm/io.h> -#include <asm/mpc10x.h> -#include <asm/ppc_sys.h> #include <asm/prom.h> #include <asm/termbits.h> +#include "mpc10x.h" + static void __iomem *avr_addr; static unsigned long avr_clock; diff --git a/arch/powerpc/platforms/embedded6xx/mpc10x.h b/arch/powerpc/platforms/embedded6xx/mpc10x.h new file mode 100644 index 000000000000..b30a6a3b5bd2 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/mpc10x.h @@ -0,0 +1,180 @@ +/* + * Common routines for the Motorola SPS MPC106/8240/107 Host bridge/Mem + * ctlr/EPIC/etc. + * + * Author: Mark A. Greer + * mgreer@mvista.com + * + * 2001 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __PPC_KERNEL_MPC10X_H +#define __PPC_KERNEL_MPC10X_H + +#include <linux/pci_ids.h> +#include <asm/pci-bridge.h> + +/* + * The values here don't completely map everything but should work in most + * cases. + * + * MAP A (PReP Map) + * Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff + * Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff + * PCI MEM: 0x80000000 -> Processor System Memory: 0x00000000 + * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB) + * + * MAP B (CHRP Map) + * Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff + * Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff + * PCI MEM: 0x00000000 -> Processor System Memory: 0x00000000 + * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB) + */ + +/* + * Define the vendor/device IDs for the various bridges--should be added to + * <linux/pci_ids.h> + */ +#define MPC10X_BRIDGE_106 ((PCI_DEVICE_ID_MOTOROLA_MPC106 << 16) | \ + PCI_VENDOR_ID_MOTOROLA) +#define MPC10X_BRIDGE_8240 ((0x0003 << 16) | PCI_VENDOR_ID_MOTOROLA) +#define MPC10X_BRIDGE_107 ((0x0004 << 16) | PCI_VENDOR_ID_MOTOROLA) +#define MPC10X_BRIDGE_8245 ((0x0006 << 16) | PCI_VENDOR_ID_MOTOROLA) + +/* Define the type of map to use */ +#define MPC10X_MEM_MAP_A 1 +#define MPC10X_MEM_MAP_B 2 + +/* Map A (PReP Map) Defines */ +#define MPC10X_MAPA_CNFG_ADDR 0x80000cf8 +#define MPC10X_MAPA_CNFG_DATA 0x80000cfc + +#define MPC10X_MAPA_ISA_IO_BASE 0x80000000 +#define MPC10X_MAPA_ISA_MEM_BASE 0xc0000000 +#define MPC10X_MAPA_DRAM_OFFSET 0x80000000 + +#define MPC10X_MAPA_PCI_INTACK_ADDR 0xbffffff0 +#define MPC10X_MAPA_PCI_IO_START 0x00000000 +#define MPC10X_MAPA_PCI_IO_END (0x00800000 - 1) +#define MPC10X_MAPA_PCI_MEM_START 0x00000000 +#define MPC10X_MAPA_PCI_MEM_END (0x20000000 - 1) + +#define MPC10X_MAPA_PCI_MEM_OFFSET (MPC10X_MAPA_ISA_MEM_BASE - \ + MPC10X_MAPA_PCI_MEM_START) + +/* Map B (CHRP Map) Defines */ +#define MPC10X_MAPB_CNFG_ADDR 0xfec00000 +#define MPC10X_MAPB_CNFG_DATA 0xfee00000 + +#define MPC10X_MAPB_ISA_IO_BASE 0xfe000000 +#define MPC10X_MAPB_ISA_MEM_BASE 0x80000000 +#define MPC10X_MAPB_DRAM_OFFSET 0x00000000 + +#define MPC10X_MAPB_PCI_INTACK_ADDR 0xfef00000 +#define MPC10X_MAPB_PCI_IO_START 0x00000000 +#define MPC10X_MAPB_PCI_IO_END (0x00c00000 - 1) +#define MPC10X_MAPB_PCI_MEM_START 0x80000000 +#define MPC10X_MAPB_PCI_MEM_END (0xc0000000 - 1) + +#define MPC10X_MAPB_PCI_MEM_OFFSET (MPC10X_MAPB_ISA_MEM_BASE - \ + MPC10X_MAPB_PCI_MEM_START) + +/* Set hose members to values appropriate for the mem map used */ +#define MPC10X_SETUP_HOSE(hose, map) { \ + (hose)->pci_mem_offset = MPC10X_MAP##map##_PCI_MEM_OFFSET; \ + (hose)->io_space.start = MPC10X_MAP##map##_PCI_IO_START; \ + (hose)->io_space.end = MPC10X_MAP##map##_PCI_IO_END; \ + (hose)->mem_space.start = MPC10X_MAP##map##_PCI_MEM_START; \ + (hose)->mem_space.end = MPC10X_MAP##map##_PCI_MEM_END; \ + (hose)->io_base_virt = (void *)MPC10X_MAP##map##_ISA_IO_BASE; \ +} + + +/* Miscellaneous Configuration register offsets */ +#define MPC10X_CFG_PIR_REG 0x09 +#define MPC10X_CFG_PIR_HOST_BRIDGE 0x00 +#define MPC10X_CFG_PIR_AGENT 0x01 + +#define MPC10X_CFG_EUMBBAR 0x78 + +#define MPC10X_CFG_PICR1_REG 0xa8 +#define MPC10X_CFG_PICR1_ADDR_MAP_MASK 0x00010000 +#define MPC10X_CFG_PICR1_ADDR_MAP_A 0x00010000 +#define MPC10X_CFG_PICR1_ADDR_MAP_B 0x00000000 +#define MPC10X_CFG_PICR1_SPEC_PCI_RD 0x00000004 +#define MPC10X_CFG_PICR1_ST_GATH_EN 0x00000040 + +#define MPC10X_CFG_PICR2_REG 0xac +#define MPC10X_CFG_PICR2_COPYBACK_OPT 0x00000001 + +#define MPC10X_CFG_MAPB_OPTIONS_REG 0xe0 +#define MPC10X_CFG_MAPB_OPTIONS_CFAE 0x80 /* CPU_FD_ALIAS_EN */ +#define MPC10X_CFG_MAPB_OPTIONS_PFAE 0x40 /* PCI_FD_ALIAS_EN */ +#define MPC10X_CFG_MAPB_OPTIONS_DR 0x20 /* DLL_RESET */ +#define MPC10X_CFG_MAPB_OPTIONS_PCICH 0x08 /* PCI_COMPATIBILITY_HOLE */ +#define MPC10X_CFG_MAPB_OPTIONS_PROCCH 0x04 /* PROC_COMPATIBILITY_HOLE */ + +/* Define offsets for the memory controller registers in the config space */ +#define MPC10X_MCTLR_MEM_START_1 0x80 /* Banks 0-3 */ +#define MPC10X_MCTLR_MEM_START_2 0x84 /* Banks 4-7 */ +#define MPC10X_MCTLR_EXT_MEM_START_1 0x88 /* Banks 0-3 */ +#define MPC10X_MCTLR_EXT_MEM_START_2 0x8c /* Banks 4-7 */ + +#define MPC10X_MCTLR_MEM_END_1 0x90 /* Banks 0-3 */ +#define MPC10X_MCTLR_MEM_END_2 0x94 /* Banks 4-7 */ +#define MPC10X_MCTLR_EXT_MEM_END_1 0x98 /* Banks 0-3 */ +#define MPC10X_MCTLR_EXT_MEM_END_2 0x9c /* Banks 4-7 */ + +#define MPC10X_MCTLR_MEM_BANK_ENABLES 0xa0 + +/* Define some offset in the EUMB */ +#define MPC10X_EUMB_SIZE 0x00100000 /* Total EUMB size (1MB) */ + +#define MPC10X_EUMB_MU_OFFSET 0x00000000 /* Msg Unit reg offset */ +#define MPC10X_EUMB_MU_SIZE 0x00001000 /* Msg Unit reg size */ +#define MPC10X_EUMB_DMA_OFFSET 0x00001000 /* DMA Unit reg offset */ +#define MPC10X_EUMB_DMA_SIZE 0x00001000 /* DMA Unit reg size */ +#define MPC10X_EUMB_ATU_OFFSET 0x00002000 /* Addr xlate reg offset */ +#define MPC10X_EUMB_ATU_SIZE 0x00001000 /* Addr xlate reg size */ +#define MPC10X_EUMB_I2C_OFFSET 0x00003000 /* I2C Unit reg offset */ +#define MPC10X_EUMB_I2C_SIZE 0x00001000 /* I2C Unit reg size */ +#define MPC10X_EUMB_DUART_OFFSET 0x00004000 /* DUART Unit reg offset (8245) */ +#define MPC10X_EUMB_DUART_SIZE 0x00001000 /* DUART Unit reg size (8245) */ +#define MPC10X_EUMB_EPIC_OFFSET 0x00040000 /* EPIC offset in EUMB */ +#define MPC10X_EUMB_EPIC_SIZE 0x00030000 /* EPIC size */ +#define MPC10X_EUMB_PM_OFFSET 0x000fe000 /* Performance Monitor reg offset (8245) */ +#define MPC10X_EUMB_PM_SIZE 0x00001000 /* Performance Monitor reg size (8245) */ +#define MPC10X_EUMB_WP_OFFSET 0x000ff000 /* Data path diagnostic, watchpoint reg offset */ +#define MPC10X_EUMB_WP_SIZE 0x00001000 /* Data path diagnostic, watchpoint reg size */ + +/* + * Define some recommended places to put the EUMB regs. + * For both maps, recommend putting the EUMB from 0xeff00000 to 0xefffffff. + */ +extern unsigned long ioremap_base; +#define MPC10X_MAPA_EUMB_BASE (ioremap_base - MPC10X_EUMB_SIZE) +#define MPC10X_MAPB_EUMB_BASE MPC10X_MAPA_EUMB_BASE + +enum ppc_sys_devices { + MPC10X_IIC1, + MPC10X_DMA0, + MPC10X_DMA1, + MPC10X_UART0, + MPC10X_UART1, + NUM_PPC_SYS_DEVS, +}; + +int mpc10x_bridge_init(struct pci_controller *hose, + uint current_map, + uint new_map, + uint phys_eumb_base); +unsigned long mpc10x_get_mem_size(uint mem_map); +int mpc10x_enable_store_gathering(struct pci_controller *hose); +int mpc10x_disable_store_gathering(struct pci_controller *hose); + +/* For MPC107 boards that use the built-in openpic */ +void mpc10x_set_openpic(void); + +#endif /* __PPC_KERNEL_MPC10X_H */ diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index 1e3cc69487b5..96737e5608d3 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -40,7 +40,6 @@ #include <asm/pci-bridge.h> #include <asm/reg.h> #include <mm/mmu_decl.h> -#include "mpc7448_hpc2.h" #include <asm/tsi108_pci.h> #include <asm/tsi108_irq.h> #include <asm/mpic.h> @@ -91,7 +90,7 @@ static void __init mpc7448_hpc2_setup_arch(void) } /* - * Interrupt setup and service. Interrrupts on the mpc7448_hpc2 come + * Interrupt setup and service. Interrupts on the mpc7448_hpc2 come * from the four external INT pins, PCI interrupts are routed via * PCI interrupt control registers, it generates internal IRQ23 * diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h deleted file mode 100644 index f7e0e0c7f8d8..000000000000 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * mpc7448_hpc2.h - * - * Definitions for Freescale MPC7448_HPC2 platform - * - * Author: Jacob Pan - * jacob.pan@freescale.com - * Maintainer: Roy Zang <roy.zang@freescale.com> - * - * 2006 (c) Freescale Semiconductor, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __PPC_PLATFORMS_MPC7448_HPC2_H -#define __PPC_PLATFORMS_MPC7448_HPC2_H - -#include <asm/ppcboot.h> - -#endif /* __PPC_PLATFORMS_MPC7448_HPC2_H */ diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/prpmc2800.c index 53420951dc53..54675648d6de 100644 --- a/arch/powerpc/platforms/embedded6xx/prpmc2800.c +++ b/arch/powerpc/platforms/embedded6xx/prpmc2800.c @@ -44,7 +44,6 @@ static void __init prpmc2800_setup_arch(void) struct device_node *np; phys_addr_t paddr; const unsigned int *reg; - const unsigned int *prop; /* * ioremap mpp and gpp registers in case they are later @@ -62,12 +61,6 @@ static void __init prpmc2800_setup_arch(void) of_node_put(np); mv64x60_gpp_reg_base = ioremap(paddr, reg[1]); - np = of_find_node_by_type(NULL, "cpu"); - prop = of_get_property(np, "clock-frequency", NULL); - if (prop) - loops_per_jiffy = *prop / HZ; - of_node_put(np); - #ifdef CONFIG_PCI mv64x60_pci_init(); #endif diff --git a/arch/powerpc/platforms/iseries/Makefile b/arch/powerpc/platforms/iseries/Makefile index 13ac3015d91c..60db509638f1 100644 --- a/arch/powerpc/platforms/iseries/Makefile +++ b/arch/powerpc/platforms/iseries/Makefile @@ -2,6 +2,7 @@ EXTRA_CFLAGS += -mno-minimal-toc extra-y += dt.o +obj-y += exception.o obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt_mod.o mf.o lpevents.o \ hvcall.o proc.o htab.o iommu.o misc.o irq.o obj-$(CONFIG_PCI) += pci.o vpdinfo.o diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S new file mode 100644 index 000000000000..5381038f0881 --- /dev/null +++ b/arch/powerpc/platforms/iseries/exception.S @@ -0,0 +1,251 @@ +/* + * Low level routines for legacy iSeries support. + * + * Extracted from head_64.S + * + * PowerPC version + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP + * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> + * Adapted for Power Macintosh by Paul Mackerras. + * Low-level exception handlers and MMU support + * rewritten by Paul Mackerras. + * Copyright (C) 1996 Paul Mackerras. + * + * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com + * + * This file contains the low-level support and setup for the + * PowerPC-64 platform, including trap and interrupt dispatch. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/reg.h> +#include <asm/ppc_asm.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> +#include <asm/ptrace.h> +#include <asm/cputable.h> + +#include "exception.h" + + .text + + .globl system_reset_iSeries +system_reset_iSeries: + mfspr r13,SPRN_SPRG3 /* Get paca address */ + mfmsr r24 + ori r24,r24,MSR_RI + mtmsrd r24 /* RI on */ + lhz r24,PACAPACAINDEX(r13) /* Get processor # */ + cmpwi 0,r24,0 /* Are we processor 0? */ + bne 1f + b .__start_initialization_iSeries /* Start up the first processor */ +1: mfspr r4,SPRN_CTRLF + li r5,CTRL_RUNLATCH /* Turn off the run light */ + andc r4,r4,r5 + mtspr SPRN_CTRLT,r4 + +1: + HMT_LOW +#ifdef CONFIG_SMP + lbz r23,PACAPROCSTART(r13) /* Test if this processor + * should start */ + sync + LOAD_REG_IMMEDIATE(r3,current_set) + sldi r28,r24,3 /* get current_set[cpu#] */ + ldx r3,r3,r28 + addi r1,r3,THREAD_SIZE + subi r1,r1,STACK_FRAME_OVERHEAD + + cmpwi 0,r23,0 + beq iSeries_secondary_smp_loop /* Loop until told to go */ + b __secondary_start /* Loop until told to go */ +iSeries_secondary_smp_loop: + /* Let the Hypervisor know we are alive */ + /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */ + lis r3,0x8002 + rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */ +#else /* CONFIG_SMP */ + /* Yield the processor. This is required for non-SMP kernels + which are running on multi-threaded machines. */ + lis r3,0x8000 + rldicr r3,r3,32,15 /* r3 = (r3 << 32) & 0xffff000000000000 */ + addi r3,r3,18 /* r3 = 0x8000000000000012 which is "yield" */ + li r4,0 /* "yield timed" */ + li r5,-1 /* "yield forever" */ +#endif /* CONFIG_SMP */ + li r0,-1 /* r0=-1 indicates a Hypervisor call */ + sc /* Invoke the hypervisor via a system call */ + mfspr r13,SPRN_SPRG3 /* Put r13 back ???? */ + b 1b /* If SMP not configured, secondaries + * loop forever */ + +/*** ISeries-LPAR interrupt handlers ***/ + + STD_EXCEPTION_ISERIES(machine_check, PACA_EXMC) + + .globl data_access_iSeries +data_access_iSeries: + mtspr SPRN_SPRG1,r13 +BEGIN_FTR_SECTION + mtspr SPRN_SPRG2,r12 + mfspr r13,SPRN_DAR + mfspr r12,SPRN_DSISR + srdi r13,r13,60 + rlwimi r13,r12,16,0x20 + mfcr r12 + cmpwi r13,0x2c + beq .do_stab_bolted_iSeries + mtcrf 0x80,r12 + mfspr r12,SPRN_SPRG2 +END_FTR_SECTION_IFCLR(CPU_FTR_SLB) + EXCEPTION_PROLOG_1(PACA_EXGEN) + EXCEPTION_PROLOG_ISERIES_1 + b data_access_common + +.do_stab_bolted_iSeries: + mtcrf 0x80,r12 + mfspr r12,SPRN_SPRG2 + EXCEPTION_PROLOG_1(PACA_EXSLB) + EXCEPTION_PROLOG_ISERIES_1 + b .do_stab_bolted + + .globl data_access_slb_iSeries +data_access_slb_iSeries: + mtspr SPRN_SPRG1,r13 /* save r13 */ + mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + std r3,PACA_EXSLB+EX_R3(r13) + mfspr r3,SPRN_DAR + std r9,PACA_EXSLB+EX_R9(r13) + mfcr r9 +#ifdef __DISABLED__ + cmpdi r3,0 + bge slb_miss_user_iseries +#endif + std r10,PACA_EXSLB+EX_R10(r13) + std r11,PACA_EXSLB+EX_R11(r13) + std r12,PACA_EXSLB+EX_R12(r13) + mfspr r10,SPRN_SPRG1 + std r10,PACA_EXSLB+EX_R13(r13) + ld r12,PACALPPACAPTR(r13) + ld r12,LPPACASRR1(r12) + b .slb_miss_realmode + + STD_EXCEPTION_ISERIES(instruction_access, PACA_EXGEN) + + .globl instruction_access_slb_iSeries +instruction_access_slb_iSeries: + mtspr SPRN_SPRG1,r13 /* save r13 */ + mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + std r3,PACA_EXSLB+EX_R3(r13) + ld r3,PACALPPACAPTR(r13) + ld r3,LPPACASRR0(r3) /* get SRR0 value */ + std r9,PACA_EXSLB+EX_R9(r13) + mfcr r9 +#ifdef __DISABLED__ + cmpdi r3,0 + bge slb_miss_user_iseries +#endif + std r10,PACA_EXSLB+EX_R10(r13) + std r11,PACA_EXSLB+EX_R11(r13) + std r12,PACA_EXSLB+EX_R12(r13) + mfspr r10,SPRN_SPRG1 + std r10,PACA_EXSLB+EX_R13(r13) + ld r12,PACALPPACAPTR(r13) + ld r12,LPPACASRR1(r12) + b .slb_miss_realmode + +#ifdef __DISABLED__ +slb_miss_user_iseries: + std r10,PACA_EXGEN+EX_R10(r13) + std r11,PACA_EXGEN+EX_R11(r13) + std r12,PACA_EXGEN+EX_R12(r13) + mfspr r10,SPRG1 + ld r11,PACA_EXSLB+EX_R9(r13) + ld r12,PACA_EXSLB+EX_R3(r13) + std r10,PACA_EXGEN+EX_R13(r13) + std r11,PACA_EXGEN+EX_R9(r13) + std r12,PACA_EXGEN+EX_R3(r13) + EXCEPTION_PROLOG_ISERIES_1 + b slb_miss_user_common +#endif + + MASKABLE_EXCEPTION_ISERIES(hardware_interrupt) + STD_EXCEPTION_ISERIES(alignment, PACA_EXGEN) + STD_EXCEPTION_ISERIES(program_check, PACA_EXGEN) + STD_EXCEPTION_ISERIES(fp_unavailable, PACA_EXGEN) + MASKABLE_EXCEPTION_ISERIES(decrementer) + STD_EXCEPTION_ISERIES(trap_0a, PACA_EXGEN) + STD_EXCEPTION_ISERIES(trap_0b, PACA_EXGEN) + + .globl system_call_iSeries +system_call_iSeries: + mr r9,r13 + mfspr r13,SPRN_SPRG3 + EXCEPTION_PROLOG_ISERIES_1 + b system_call_common + + STD_EXCEPTION_ISERIES(single_step, PACA_EXGEN) + STD_EXCEPTION_ISERIES(trap_0e, PACA_EXGEN) + STD_EXCEPTION_ISERIES(performance_monitor, PACA_EXGEN) + +decrementer_iSeries_masked: + /* We may not have a valid TOC pointer in here. */ + li r11,1 + ld r12,PACALPPACAPTR(r13) + stb r11,LPPACADECRINT(r12) + LOAD_REG_IMMEDIATE(r12, tb_ticks_per_jiffy) + lwz r12,0(r12) + mtspr SPRN_DEC,r12 + /* fall through */ + +hardware_interrupt_iSeries_masked: + mtcrf 0x80,r9 /* Restore regs */ + ld r12,PACALPPACAPTR(r13) + ld r11,LPPACASRR0(r12) + ld r12,LPPACASRR1(r12) + mtspr SPRN_SRR0,r11 + mtspr SPRN_SRR1,r12 + ld r9,PACA_EXGEN+EX_R9(r13) + ld r10,PACA_EXGEN+EX_R10(r13) + ld r11,PACA_EXGEN+EX_R11(r13) + ld r12,PACA_EXGEN+EX_R12(r13) + ld r13,PACA_EXGEN+EX_R13(r13) + rfid + b . /* prevent speculative execution */ + +_INIT_STATIC(__start_initialization_iSeries) + /* Clear out the BSS */ + LOAD_REG_IMMEDIATE(r11,__bss_stop) + LOAD_REG_IMMEDIATE(r8,__bss_start) + sub r11,r11,r8 /* bss size */ + addi r11,r11,7 /* round up to an even double word */ + rldicl. r11,r11,61,3 /* shift right by 3 */ + beq 4f + addi r8,r8,-8 + li r0,0 + mtctr r11 /* zero this many doublewords */ +3: stdu r0,8(r8) + bdnz 3b +4: + LOAD_REG_IMMEDIATE(r1,init_thread_union) + addi r1,r1,THREAD_SIZE + li r0,0 + stdu r0,-STACK_FRAME_OVERHEAD(r1) + + LOAD_REG_IMMEDIATE(r2,__toc_start) + addi r2,r2,0x4000 + addi r2,r2,0x4000 + + bl .iSeries_early_setup + bl .early_setup + + /* relocation is on at this point */ + + b .start_here_common diff --git a/arch/powerpc/platforms/iseries/exception.h b/arch/powerpc/platforms/iseries/exception.h new file mode 100644 index 000000000000..ced45a8fa1aa --- /dev/null +++ b/arch/powerpc/platforms/iseries/exception.h @@ -0,0 +1,58 @@ +#ifndef _ASM_POWERPC_ISERIES_EXCEPTION_H +#define _ASM_POWERPC_ISERIES_EXCEPTION_H +/* + * Extracted from head_64.S + * + * PowerPC version + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP + * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> + * Adapted for Power Macintosh by Paul Mackerras. + * Low-level exception handlers and MMU support + * rewritten by Paul Mackerras. + * Copyright (C) 1996 Paul Mackerras. + * + * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com + * + * This file contains the low-level support and setup for the + * PowerPC-64 platform, including trap and interrupt dispatch. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <asm/exception.h> + +#define EXCEPTION_PROLOG_ISERIES_1 \ + mfmsr r10; \ + ld r12,PACALPPACAPTR(r13); \ + ld r11,LPPACASRR0(r12); \ + ld r12,LPPACASRR1(r12); \ + ori r10,r10,MSR_RI; \ + mtmsrd r10,1 + +#define STD_EXCEPTION_ISERIES(label, area) \ + .globl label##_iSeries; \ +label##_iSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + EXCEPTION_PROLOG_1(area); \ + EXCEPTION_PROLOG_ISERIES_1; \ + b label##_common + +#define MASKABLE_EXCEPTION_ISERIES(label) \ + .globl label##_iSeries; \ +label##_iSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + EXCEPTION_PROLOG_1(PACA_EXGEN); \ + lbz r10,PACASOFTIRQEN(r13); \ + cmpwi 0,r10,0; \ + beq- label##_iSeries_masked; \ + EXCEPTION_PROLOG_ISERIES_1; \ + b label##_common; \ + +#endif /* _ASM_POWERPC_ISERIES_EXCEPTION_H */ diff --git a/arch/powerpc/platforms/iseries/it_lp_naca.h b/arch/powerpc/platforms/iseries/it_lp_naca.h index 9bbf58986819..cf6dcf6ef07b 100644 --- a/arch/powerpc/platforms/iseries/it_lp_naca.h +++ b/arch/powerpc/platforms/iseries/it_lp_naca.h @@ -60,7 +60,7 @@ struct ItLpNaca { u8 xRsvd2_0[128]; // Reserved x00-x7F // CACHE_LINE_3-6 0x0100 - 0x02FF Contains LP Queue indicators -// NB: Padding required to keep xInterrruptHdlr at x300 which is required +// NB: Padding required to keep xInterruptHdlr at x300 which is required // for v4r4 PLIC. u8 xOldLpQueue[128]; // LP Queue needed for v4r4 100-17F u8 xRsvd3_0[384]; // Reserved 180-2FF diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 13a8b1908ded..fad493e29d37 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -41,7 +41,6 @@ #include <asm/time.h> #include <asm/paca.h> #include <asm/cache.h> -#include <asm/sections.h> #include <asm/abs_addr.h> #include <asm/iseries/hv_lp_config.h> #include <asm/iseries/hv_call_event.h> diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 2542403288f9..771ed0cf29a5 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -169,15 +169,12 @@ static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn, switch (len) { case 1: out_8(addr, val); - (void) in_8(addr); break; case 2: out_le16(addr, val); - (void) in_le16(addr); break; default: out_le32(addr, val); - (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -185,8 +182,8 @@ static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn, static struct pci_ops u3_agp_pci_ops = { - u3_agp_read_config, - u3_agp_write_config + .read = u3_agp_read_config, + .write = u3_agp_write_config, }; static unsigned long u3_ht_cfa0(u8 devfn, u8 off) @@ -268,15 +265,12 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, switch (len) { case 1: out_8(addr, val); - (void) in_8(addr); break; case 2: out_le16(addr, val); - (void) in_le16(addr); break; default: out_le32(addr, val); - (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -284,8 +278,8 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, static struct pci_ops u3_ht_pci_ops = { - u3_ht_read_config, - u3_ht_write_config + .read = u3_ht_read_config, + .write = u3_ht_write_config, }; static unsigned int u4_pcie_cfa0(unsigned int devfn, unsigned int off) @@ -376,15 +370,12 @@ static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn, switch (len) { case 1: out_8(addr, val); - (void) in_8(addr); break; case 2: out_le16(addr, val); - (void) in_le16(addr); break; default: out_le32(addr, val); - (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -392,8 +383,8 @@ static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn, static struct pci_ops u4_pcie_pci_ops = { - u4_pcie_read_config, - u4_pcie_write_config + .read = u4_pcie_read_config, + .write = u4_pcie_write_config, }; static void __init setup_u3_agp(struct pci_controller* hose) diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c index 9014d55c717b..6c42787fb382 100644 --- a/arch/powerpc/platforms/pasemi/iommu.c +++ b/arch/powerpc/platforms/pasemi/iommu.c @@ -187,7 +187,7 @@ static void pci_dma_dev_setup_pasemi(struct pci_dev *dev) static void pci_dma_bus_setup_null(struct pci_bus *b) { } static void pci_dma_dev_setup_null(struct pci_dev *d) { } -int iob_init(struct device_node *dn) +int __init iob_init(struct device_node *dn) { unsigned long tmp; u32 regword; @@ -233,7 +233,7 @@ int iob_init(struct device_node *dn) /* These are called very early. */ -void iommu_init_early_pasemi(void) +void __init iommu_init_early_pasemi(void) { int iommu_off; diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c index ab1f5f62bcd8..03d1d07aa2ac 100644 --- a/arch/powerpc/platforms/pasemi/pci.c +++ b/arch/powerpc/platforms/pasemi/pci.c @@ -107,23 +107,20 @@ static int pa_pxp_write_config(struct pci_bus *bus, unsigned int devfn, switch (len) { case 1: out_8(addr, val); - (void) in_8(addr); break; case 2: out_le16(addr, val); - (void) in_le16(addr); break; default: out_le32(addr, val); - (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; } static struct pci_ops pa_pxp_ops = { - pa_pxp_read_config, - pa_pxp_write_config, + .read = pa_pxp_read_config, + .write = pa_pxp_write_config, }; static void __init setup_pa_pxp(struct pci_controller *hose) diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index ffe6528048b5..05def6282f83 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -50,26 +50,30 @@ static void pas_restart(char *cmd) #ifdef CONFIG_SMP static DEFINE_SPINLOCK(timebase_lock); +static unsigned long timebase; static void __devinit pas_give_timebase(void) { - unsigned long tb; - spin_lock(&timebase_lock); mtspr(SPRN_TBCTL, TBCTL_FREEZE); - tb = mftb(); - mtspr(SPRN_TBCTL, TBCTL_UPDATE_LOWER | (tb & 0xffffffff)); - mtspr(SPRN_TBCTL, TBCTL_UPDATE_UPPER | (tb >> 32)); - mtspr(SPRN_TBCTL, TBCTL_RESTART); + isync(); + timebase = get_tb(); spin_unlock(&timebase_lock); - pr_debug("pas_give_timebase: cpu %d gave tb %lx\n", - smp_processor_id(), tb); + + while (timebase) + barrier(); + mtspr(SPRN_TBCTL, TBCTL_RESTART); } static void __devinit pas_take_timebase(void) { - pr_debug("pas_take_timebase: cpu %d has tb %lx\n", - smp_processor_id(), mftb()); + while (!timebase) + smp_rmb(); + + spin_lock(&timebase_lock); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + spin_unlock(&timebase_lock); } struct smp_ops_t pas_smp_ops = { diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c index 9d73d0234c5d..cf660916ae0b 100644 --- a/arch/powerpc/platforms/powermac/bootx_init.c +++ b/arch/powerpc/platforms/powermac/bootx_init.c @@ -17,7 +17,6 @@ #include <asm/prom.h> #include <asm/page.h> #include <asm/bootx.h> -#include <asm/bootinfo.h> #include <asm/btext.h> #include <asm/io.h> diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index efdf5eb81ecc..da2007e3db0e 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -40,7 +40,6 @@ #include <linux/completion.h> #include <linux/platform_device.h> #include <linux/interrupt.h> -#include <linux/completion.h> #include <linux/timer.h> #include <linux/mutex.h> #include <asm/keylargo.h> diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 92586db19754..ec49099830d5 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -209,15 +209,12 @@ static int macrisc_write_config(struct pci_bus *bus, unsigned int devfn, switch (len) { case 1: out_8(addr, val); - (void) in_8(addr); break; case 2: out_le16(addr, val); - (void) in_le16(addr); break; default: out_le32(addr, val); - (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -225,8 +222,8 @@ static int macrisc_write_config(struct pci_bus *bus, unsigned int devfn, static struct pci_ops macrisc_pci_ops = { - macrisc_read_config, - macrisc_write_config + .read = macrisc_read_config, + .write = macrisc_write_config, }; #ifdef CONFIG_PPC32 @@ -280,8 +277,8 @@ chaos_write_config(struct pci_bus *bus, unsigned int devfn, int offset, static struct pci_ops chaos_pci_ops = { - chaos_read_config, - chaos_write_config + .read = chaos_read_config, + .write = chaos_write_config, }; static void __init setup_chaos(struct pci_controller *hose, @@ -440,15 +437,12 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, switch (len) { case 1: out_8(addr, val); - (void) in_8(addr); break; case 2: out_le16(addr, val); - (void) in_le16(addr); break; default: out_le32((u32 __iomem *)addr, val); - (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -456,8 +450,8 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, static struct pci_ops u3_ht_pci_ops = { - u3_ht_read_config, - u3_ht_write_config + .read = u3_ht_read_config, + .write = u3_ht_write_config, }; #define U4_PCIE_CFA0(devfn, off) \ @@ -545,15 +539,12 @@ static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn, switch (len) { case 1: out_8(addr, val); - (void) in_8(addr); break; case 2: out_le16(addr, val); - (void) in_le16(addr); break; default: out_le32(addr, val); - (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -561,8 +552,8 @@ static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn, static struct pci_ops u4_pcie_pci_ops = { - u4_pcie_read_config, - u4_pcie_write_config + .read = u4_pcie_read_config, + .write = u4_pcie_write_config, }; #endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h index 6e090a7dea83..fcde070f7054 100644 --- a/arch/powerpc/platforms/powermac/pmac.h +++ b/arch/powerpc/platforms/powermac/pmac.h @@ -22,9 +22,6 @@ extern void pmac_read_rtc_time(void); extern void pmac_calibrate_decr(void); extern void pmac_pci_irq_fixup(struct pci_dev *); extern void pmac_pci_init(void); -extern unsigned long pmac_ide_get_base(int index); -extern void pmac_ide_init_hwif_ports(hw_regs_t *hw, - unsigned long data_port, unsigned long ctrl_port, int *irq); extern void pmac_nvram_update(void); extern unsigned char pmac_nvram_read_byte(int addr); @@ -33,7 +30,6 @@ extern int pmac_pci_enable_device_hook(struct pci_dev *dev, int initial); extern void pmac_pcibios_after_init(void); extern int of_show_percpuinfo(struct seq_file *m, int i); -extern void pmac_pci_init(void); extern void pmac_setup_pci_dma(void); extern void pmac_check_ht_link(void); diff --git a/arch/powerpc/platforms/powermac/udbg_adb.c b/arch/powerpc/platforms/powermac/udbg_adb.c index 6124e59e1038..44e0b55a2a02 100644 --- a/arch/powerpc/platforms/powermac/udbg_adb.c +++ b/arch/powerpc/platforms/powermac/udbg_adb.c @@ -12,7 +12,6 @@ #include <asm/xmon.h> #include <asm/prom.h> #include <asm/bootx.h> -#include <asm/machdep.h> #include <asm/errno.h> #include <asm/pmac_feature.h> #include <asm/processor.h> @@ -150,7 +149,7 @@ static void udbg_adb_putc(char c) return udbg_adb_old_putc(c); } -void udbg_adb_init_early(void) +void __init udbg_adb_init_early(void) { #ifdef CONFIG_BOOTX_TEXT if (btext_find_display(1) == 0) { @@ -160,7 +159,7 @@ void udbg_adb_init_early(void) #endif } -int udbg_adb_init(int force_btext) +int __init udbg_adb_init(int force_btext) { struct device_node *np; diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index b8770395013d..b242c6c34f81 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -169,6 +169,8 @@ static void rtas_slot_error_detail(struct pci_dn *pdn, int severity, */ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) { + struct device_node *dn; + struct pci_dev *dev = pdn->pcidev; u32 cfg; int cap, i; int n = 0; @@ -184,6 +186,17 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg); printk(KERN_WARNING "EEH: PCI cmd/status register: %08x\n", cfg); + /* Gather bridge-specific registers */ + if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) { + rtas_read_config(pdn, PCI_SEC_STATUS, 2, &cfg); + n += scnprintf(buf+n, len-n, "sec stat:%x\n", cfg); + printk(KERN_WARNING "EEH: Bridge secondary status: %04x\n", cfg); + + rtas_read_config(pdn, PCI_BRIDGE_CONTROL, 2, &cfg); + n += scnprintf(buf+n, len-n, "brdg ctl:%x\n", cfg); + printk(KERN_WARNING "EEH: Bridge control: %04x\n", cfg); + } + /* Dump out the PCI-X command and status regs */ cap = pci_find_capability(pdn->pcidev, PCI_CAP_ID_PCIX); if (cap) { @@ -209,7 +222,7 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) printk(KERN_WARNING "EEH: PCI-E %02x: %08x\n", i, cfg); } - cap = pci_find_ext_capability(pdn->pcidev,PCI_EXT_CAP_ID_ERR); + cap = pci_find_ext_capability(pdn->pcidev, PCI_EXT_CAP_ID_ERR); if (cap) { n += scnprintf(buf+n, len-n, "pci-e AER:\n"); printk(KERN_WARNING @@ -222,6 +235,18 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) } } } + + /* Gather status on devices under the bridge */ + if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) { + dn = pdn->node->child; + while (dn) { + pdn = PCI_DN(dn); + if (pdn) + n += gather_pci_data(pdn, buf+n, len-n); + dn = dn->sibling; + } + } + return n; } @@ -750,12 +775,12 @@ int rtas_set_slot_reset(struct pci_dn *pdn) return 0; if (rc < 0) { - printk (KERN_ERR "EEH: unrecoverable slot failure %s\n", - pdn->node->full_name); + printk(KERN_ERR "EEH: unrecoverable slot failure %s\n", + pdn->node->full_name); return -1; } - printk (KERN_ERR "EEH: bus reset %d failed on slot %s\n", - i+1, pdn->node->full_name); + printk(KERN_ERR "EEH: bus reset %d failed on slot %s, rc=%d\n", + i+1, pdn->node->full_name, rc); } return -1; @@ -944,23 +969,6 @@ static void *early_enable_eeh(struct device_node *dn, void *data) } pdn->class_code = *class_code; - /* - * Now decide if we are going to "Disable" EEH checking - * for this device. We still run with the EEH hardware active, - * but we won't be checking for ff's. This means a driver - * could return bad data (very bad!), an interrupt handler could - * hang waiting on status bits that won't change, etc. - * But there are a few cases like display devices that make sense. - */ - enable = 1; /* i.e. we will do checking */ -#if 0 - if ((*class_code >> 16) == PCI_BASE_CLASS_DISPLAY) - enable = 0; -#endif - - if (!enable) - pdn->eeh_mode |= EEH_MODE_NOCHECK; - /* Ok... see if this device supports EEH. Some do, some don't, * and the only way to find out is to check each and every one. */ regs = of_get_property(dn, "reg", NULL); diff --git a/arch/powerpc/platforms/pseries/eeh_cache.c b/arch/powerpc/platforms/pseries/eeh_cache.c index e49c815eae23..1e83fcd0df31 100644 --- a/arch/powerpc/platforms/pseries/eeh_cache.c +++ b/arch/powerpc/platforms/pseries/eeh_cache.c @@ -225,6 +225,10 @@ void pci_addr_cache_insert_device(struct pci_dev *dev) { unsigned long flags; + /* Ignore PCI bridges */ + if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) + return; + spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); __pci_addr_cache_insert_device(dev); spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); @@ -285,16 +289,13 @@ void __init pci_addr_cache_build(void) spin_lock_init(&pci_io_addr_cache_root.piar_lock); while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { - /* Ignore PCI bridges */ - if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) - continue; pci_addr_cache_insert_device(dev); dn = pci_device_to_OF_node(dev); if (!dn) continue; - pci_dev_get (dev); /* matching put is in eeh_remove_device() */ + pci_dev_get(dev); /* matching put is in eeh_remove_device() */ PCI_DN(dn)->pcidev = dev; eeh_sysfs_add_device(dev); diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 8cc6eeeaae2f..ea327ca345c6 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -35,7 +35,6 @@ #include <asm/tlbflush.h> #include <asm/tlb.h> #include <asm/prom.h> -#include <asm/abs_addr.h> #include <asm/cputable.h> #include <asm/udbg.h> #include <asm/smp.h> diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c index 9797b10b2935..30925d29bcea 100644 --- a/arch/powerpc/platforms/pseries/rtasd.c +++ b/arch/powerpc/platforms/pseries/rtasd.c @@ -44,15 +44,19 @@ static unsigned long rtas_log_start; static unsigned long rtas_log_size; static int surveillance_timeout = -1; -static unsigned int rtas_event_scan_rate; static unsigned int rtas_error_log_max; static unsigned int rtas_error_log_buffer_max; +/* RTAS service tokens */ +static unsigned int event_scan; +static unsigned int rtas_event_scan_rate; + static int full_rtas_msgs = 0; -extern int no_logging; +/* Stop logging to nvram after first fatal error */ +static int no_more_logging; -volatile int error_log_cnt = 0; +static int error_log_cnt; /* * Since we use 32 bit RTAS, the physical address of this must be below @@ -61,8 +65,6 @@ volatile int error_log_cnt = 0; */ static unsigned char logdata[RTAS_ERROR_LOG_MAX]; -static int get_eventscan_parms(void); - static char *rtas_type[] = { "Unknown", "Retry", "TCE Error", "Internal Device Failure", "Timeout", "Data Parity", "Address Parity", "Cache Parity", @@ -166,9 +168,9 @@ static int log_rtas_len(char * buf) len += err->extended_log_length; } - if (rtas_error_log_max == 0) { - get_eventscan_parms(); - } + if (rtas_error_log_max == 0) + rtas_error_log_max = rtas_get_error_log_max(); + if (len > rtas_error_log_max) len = rtas_error_log_max; @@ -215,8 +217,8 @@ void pSeries_log_error(char *buf, unsigned int err_type, int fatal) } /* Write error to NVRAM */ - if (!no_logging && !(err_type & ERR_FLAG_BOOT)) - nvram_write_error_log(buf, len, err_type); + if (!no_more_logging && !(err_type & ERR_FLAG_BOOT)) + nvram_write_error_log(buf, len, err_type, error_log_cnt); /* * rtas errors can occur during boot, and we do want to capture @@ -227,8 +229,8 @@ void pSeries_log_error(char *buf, unsigned int err_type, int fatal) printk_log_rtas(buf, len); /* Check to see if we need to or have stopped logging */ - if (fatal || no_logging) { - no_logging = 1; + if (fatal || no_more_logging) { + no_more_logging = 1; spin_unlock_irqrestore(&rtasd_log_lock, s); return; } @@ -300,7 +302,7 @@ static ssize_t rtas_log_read(struct file * file, char __user * buf, spin_lock_irqsave(&rtasd_log_lock, s); /* if it's 0, then we know we got the last one (the one in NVRAM) */ - if (rtas_log_size == 0 && !no_logging) + if (rtas_log_size == 0 && !no_more_logging) nvram_clear_error_log(); spin_unlock_irqrestore(&rtasd_log_lock, s); @@ -356,32 +358,7 @@ static int enable_surveillance(int timeout) return -1; } -static int get_eventscan_parms(void) -{ - struct device_node *node; - const int *ip; - - node = of_find_node_by_path("/rtas"); - - ip = of_get_property(node, "rtas-event-scan-rate", NULL); - if (ip == NULL) { - printk(KERN_ERR "rtasd: no rtas-event-scan-rate\n"); - of_node_put(node); - return -1; - } - rtas_event_scan_rate = *ip; - DEBUG("rtas-event-scan-rate %d\n", rtas_event_scan_rate); - - /* Make room for the sequence number */ - rtas_error_log_max = rtas_get_error_log_max(); - rtas_error_log_buffer_max = rtas_error_log_max + sizeof(int); - - of_node_put(node); - - return 0; -} - -static void do_event_scan(int event_scan) +static void do_event_scan(void) { int error; do { @@ -408,7 +385,7 @@ static void do_event_scan_all_cpus(long delay) cpu = first_cpu(cpu_online_map); for (;;) { set_cpus_allowed(current, cpumask_of_cpu(cpu)); - do_event_scan(rtas_token("event-scan")); + do_event_scan(); set_cpus_allowed(current, CPU_MASK_ALL); /* Drop hotplug lock, and sleep for the specified delay */ @@ -426,31 +403,17 @@ static void do_event_scan_all_cpus(long delay) static int rtasd(void *unused) { unsigned int err_type; - int event_scan = rtas_token("event-scan"); int rc; daemonize("rtasd"); - if (event_scan == RTAS_UNKNOWN_SERVICE || get_eventscan_parms() == -1) - goto error; - - rtas_log_buf = vmalloc(rtas_error_log_buffer_max*LOG_NUMBER); - if (!rtas_log_buf) { - printk(KERN_ERR "rtasd: no memory\n"); - goto error; - } - printk(KERN_DEBUG "RTAS daemon started\n"); - DEBUG("will sleep for %d milliseconds\n", (30000/rtas_event_scan_rate)); /* See if we have any error stored in NVRAM */ memset(logdata, 0, rtas_error_log_max); - - rc = nvram_read_error_log(logdata, rtas_error_log_max, &err_type); - - /* We can use rtas_log_buf now */ - no_logging = 0; + rc = nvram_read_error_log(logdata, rtas_error_log_max, + &err_type, &error_log_cnt); if (!rc) { if (err_type != ERR_FLAG_ALREADY_LOGGED) { @@ -473,8 +436,6 @@ static int rtasd(void *unused) for (;;) do_event_scan_all_cpus(30000/rtas_event_scan_rate); -error: - /* Should delete proc entries */ return -EINVAL; } @@ -486,11 +447,28 @@ static int __init rtas_init(void) return 0; /* No RTAS */ - if (rtas_token("event-scan") == RTAS_UNKNOWN_SERVICE) { + event_scan = rtas_token("event-scan"); + if (event_scan == RTAS_UNKNOWN_SERVICE) { printk(KERN_DEBUG "rtasd: no event-scan on system\n"); return -ENODEV; } + rtas_event_scan_rate = rtas_token("rtas-event-scan-rate"); + if (rtas_event_scan_rate == RTAS_UNKNOWN_SERVICE) { + printk(KERN_ERR "rtasd: no rtas-event-scan-rate on system\n"); + return -ENODEV; + } + + /* Make room for the sequence number */ + rtas_error_log_max = rtas_get_error_log_max(); + rtas_error_log_buffer_max = rtas_error_log_max + sizeof(int); + + rtas_log_buf = vmalloc(rtas_error_log_buffer_max*LOG_NUMBER); + if (!rtas_log_buf) { + printk(KERN_ERR "rtasd: no memory\n"); + return -ENOMEM; + } + entry = create_proc_entry("ppc64/rtas/error_log", S_IRUSR, NULL); if (entry) entry->proc_fops = &proc_rtas_log_operations; diff --git a/arch/powerpc/sysdev/commproc.c b/arch/powerpc/sysdev/commproc.c index 4f67b89ba1d0..e8e79f83d198 100644 --- a/arch/powerpc/sysdev/commproc.c +++ b/arch/powerpc/sysdev/commproc.c @@ -45,10 +45,10 @@ #define CPM_MAP_SIZE (0x4000) static void m8xx_cpm_dpinit(void); -static uint host_buffer; /* One page of host buffer */ -static uint host_end; /* end + 1 */ -cpm8xx_t *cpmp; /* Pointer to comm processor space */ -cpic8xx_t *cpic_reg; +static uint host_buffer; /* One page of host buffer */ +static uint host_end; /* end + 1 */ +cpm8xx_t *cpmp; /* Pointer to comm processor space */ +cpic8xx_t *cpic_reg; static struct device_node *cpm_pic_node; static struct irq_host *cpm_pic_host; @@ -115,7 +115,7 @@ static int cpm_pic_host_map(struct irq_host *h, unsigned int virq, * and return. This is a no-op function so we don't need any special * tests in the interrupt handler. */ -static irqreturn_t cpm_error_interrupt(int irq, void *dev) +static irqreturn_t cpm_error_interrupt(int irq, void *dev) { return IRQ_HANDLED; } @@ -181,7 +181,7 @@ unsigned int cpm_pic_init(void) printk(KERN_ERR "CPM PIC init: can not find cpm node\n"); goto end; } - eirq= irq_of_parse_and_map(np, 0); + eirq = irq_of_parse_and_map(np, 0); if (eirq == NO_IRQ) goto end; @@ -197,15 +197,15 @@ end: void cpm_reset(void) { - cpm8xx_t *commproc; - sysconf8xx_t *siu_conf; + cpm8xx_t *commproc; + sysconf8xx_t *siu_conf; commproc = (cpm8xx_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE); #ifdef CONFIG_UCODE_PATCH /* Perform a reset. */ - out_be16(&commproc->cp_cpcr, CPM_CR_RST | CPM_CR_FLG); + out_be16(&commproc->cp_cpcr, CPM_CR_RST | CPM_CR_FLG); /* Wait for it. */ @@ -307,7 +307,7 @@ static rh_block_t cpm_boot_dpmem_rh_block[16]; static rh_info_t cpm_dpmem_info; #define CPM_DPMEM_ALIGNMENT 8 -static u8* dpram_vbase; +static u8 *dpram_vbase; static uint dpram_pbase; void m8xx_cpm_dpinit(void) diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c index c827715a5090..3bf89b324760 100644 --- a/arch/powerpc/sysdev/cpm2_common.c +++ b/arch/powerpc/sysdev/cpm2_common.c @@ -201,7 +201,7 @@ int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode) } if (mode == CPM_CLK_RX) - shift +=3; + shift += 3; for (i=0; i<24; i++) { if (clk_map[i][0] == target && clk_map[i][1] == clock) { diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index a1d2042bb304..e0e24b01e3a6 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -204,7 +204,7 @@ static void dart_free(struct iommu_table *tbl, long index, long npages) } -static int dart_init(struct device_node *dart_node) +static int __init dart_init(struct device_node *dart_node) { unsigned int i; unsigned long tmp, base, size; @@ -313,7 +313,7 @@ static void pci_dma_bus_setup_dart(struct pci_bus *bus) PCI_DN(dn)->iommu_table = &iommu_table_dart; } -void iommu_init_early_dart(void) +void __init iommu_init_early_dart(void) { struct device_node *dn; diff --git a/arch/powerpc/sysdev/dcr.c b/arch/powerpc/sysdev/dcr.c index 574b6ef44e0b..e82d54de8a8d 100644 --- a/arch/powerpc/sysdev/dcr.c +++ b/arch/powerpc/sysdev/dcr.c @@ -33,6 +33,7 @@ unsigned int dcr_resource_start(struct device_node *np, unsigned int index) return dr[index * 2]; } +EXPORT_SYMBOL_GPL(dcr_resource_start); unsigned int dcr_resource_len(struct device_node *np, unsigned int index) { @@ -44,6 +45,7 @@ unsigned int dcr_resource_len(struct device_node *np, unsigned int index) return dr[index * 2 + 1]; } +EXPORT_SYMBOL_GPL(dcr_resource_len); #ifndef CONFIG_PPC_DCR_NATIVE @@ -122,6 +124,7 @@ dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n, ret.token -= dcr_n * ret.stride; return ret; } +EXPORT_SYMBOL_GPL(dcr_map); void dcr_unmap(dcr_host_t host, unsigned int dcr_n, unsigned int dcr_c) { @@ -133,5 +136,6 @@ void dcr_unmap(dcr_host_t host, unsigned int dcr_n, unsigned int dcr_c) iounmap(h.token); h.token = NULL; } +EXPORT_SYMBOL_GPL(dcr_unmap); #endif /* !defined(CONFIG_PPC_DCR_NATIVE) */ diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 1cf29c9d4408..f3abce11bead 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -321,21 +321,26 @@ static struct i2c_driver_device i2c_devices[] __initdata = { {"ricoh,rv5c387a", "rtc-rs5c372", "rv5c387a",}, }; -static int __init of_find_i2c_driver(struct device_node *node, struct i2c_board_info *info) +static int __init of_find_i2c_driver(struct device_node *node, + struct i2c_board_info *info) { int i; for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) { if (!of_device_is_compatible(node, i2c_devices[i].of_device)) continue; - strncpy(info->driver_name, i2c_devices[i].i2c_driver, KOBJ_NAME_LEN); - strncpy(info->type, i2c_devices[i].i2c_type, I2C_NAME_SIZE); + if (strlcpy(info->driver_name, i2c_devices[i].i2c_driver, + KOBJ_NAME_LEN) >= KOBJ_NAME_LEN || + strlcpy(info->type, i2c_devices[i].i2c_type, + I2C_NAME_SIZE) >= I2C_NAME_SIZE) + return -ENOMEM; return 0; } return -ENODEV; } -static void __init of_register_i2c_devices(struct device_node *adap_node, int bus_num) +static void __init of_register_i2c_devices(struct device_node *adap_node, + int bus_num) { struct device_node *node = NULL; diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c index 5294560c7b00..b5d068204aa3 100644 --- a/arch/powerpc/sysdev/indirect_pci.c +++ b/arch/powerpc/sysdev/indirect_pci.c @@ -144,8 +144,8 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset, static struct pci_ops indirect_pci_ops = { - indirect_read_config, - indirect_write_config + .read = indirect_read_config, + .write = indirect_write_config, }; void __init diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c index 90db8a720fed..cf0bfbd73401 100644 --- a/arch/powerpc/sysdev/tsi108_pci.c +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -193,8 +193,8 @@ void tsi108_clear_pci_cfg_error(void) } static struct pci_ops tsi108_direct_pci_ops = { - tsi108_direct_read_config, - tsi108_direct_write_config + .read = tsi108_direct_read_config, + .write = tsi108_direct_write_config, }; int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary) diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c index 89059895a20d..47180b3fca56 100644 --- a/arch/powerpc/sysdev/uic.c +++ b/arch/powerpc/sysdev/uic.c @@ -24,6 +24,7 @@ #include <linux/spinlock.h> #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/kernel_stat.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/prom.h> @@ -142,7 +143,7 @@ static int uic_set_irq_type(unsigned int virq, unsigned int flow_type) desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; - if (trigger) + if (!trigger) desc->status |= IRQ_LEVEL; spin_unlock_irqrestore(&uic->lock, flags); @@ -159,6 +160,64 @@ static struct irq_chip uic_irq_chip = { .set_type = uic_set_irq_type, }; +/** + * handle_uic_irq - irq flow handler for UIC + * @irq: the interrupt number + * @desc: the interrupt description structure for this irq + * + * This is modified version of the generic handle_level_irq() suitable + * for the UIC. On the UIC, acking (i.e. clearing the SR bit) a level + * irq will have no effect if the interrupt is still asserted by the + * device, even if the interrupt is already masked. Therefore, unlike + * the standard handle_level_irq(), we must ack the interrupt *after* + * invoking the ISR (which should have de-asserted the interrupt in + * the external source). For edge interrupts we ack at the beginning + * instead of the end, to keep the window in which we can miss an + * interrupt as small as possible. + */ +void fastcall handle_uic_irq(unsigned int irq, struct irq_desc *desc) +{ + unsigned int cpu = smp_processor_id(); + struct irqaction *action; + irqreturn_t action_ret; + + spin_lock(&desc->lock); + if (desc->status & IRQ_LEVEL) + desc->chip->mask(irq); + else + desc->chip->mask_ack(irq); + + if (unlikely(desc->status & IRQ_INPROGRESS)) + goto out_unlock; + desc->status &= ~(IRQ_REPLAY | IRQ_WAITING); + kstat_cpu(cpu).irqs[irq]++; + + /* + * If its disabled or no action available + * keep it masked and get out of here + */ + action = desc->action; + if (unlikely(!action || (desc->status & IRQ_DISABLED))) { + desc->status |= IRQ_PENDING; + goto out_unlock; + } + + desc->status |= IRQ_INPROGRESS; + desc->status &= ~IRQ_PENDING; + spin_unlock(&desc->lock); + + action_ret = handle_IRQ_event(irq, action); + + spin_lock(&desc->lock); + desc->status &= ~IRQ_INPROGRESS; + if (desc->status & IRQ_LEVEL) + desc->chip->ack(irq); + if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask) + desc->chip->unmask(irq); +out_unlock: + spin_unlock(&desc->lock); +} + static int uic_host_match(struct irq_host *h, struct device_node *node) { struct uic *uic = h->host_data; @@ -173,7 +232,7 @@ static int uic_host_map(struct irq_host *h, unsigned int virq, set_irq_chip_data(virq, uic); /* Despite the name, handle_level_irq() works for both level * and edge irqs on UIC. FIXME: check this is correct */ - set_irq_chip_and_handler(virq, &uic_irq_chip, handle_level_irq); + set_irq_chip_and_handler(virq, &uic_irq_chip, handle_uic_irq); /* Set default irq type */ set_irq_type(virq, IRQ_TYPE_NONE); @@ -207,6 +266,9 @@ irqreturn_t uic_cascade(int virq, void *data) int subvirq; msr = mfdcr(uic->dcrbase + UIC_MSR); + if (!msr) /* spurious interrupt */ + return IRQ_HANDLED; + src = 32 - ffs(msr); subvirq = irq_linear_revmap(uic->irqhost, src); diff --git a/arch/ppc/.gitignore b/arch/ppc/.gitignore index a1a869c8c840..1e79a0ae4473 100644 --- a/arch/ppc/.gitignore +++ b/arch/ppc/.gitignore @@ -1 +1 @@ -include +/include diff --git a/drivers/char/hvc_beat.c b/drivers/char/hvc_beat.c index 6f019f19be71..e74bb949c289 100644 --- a/drivers/char/hvc_beat.c +++ b/drivers/char/hvc_beat.c @@ -97,7 +97,7 @@ static int hvc_beat_config(char *p) return 0; } -static int hvc_beat_console_init(void) +static int __init hvc_beat_console_init(void) { if (hvc_beat_useit && machine_is_compatible("Beat")) { hvc_instantiate(0, 0, &hvc_beat_get_put_ops); @@ -106,7 +106,7 @@ static int hvc_beat_console_init(void) } /* temp */ -static int hvc_beat_init(void) +static int __init hvc_beat_init(void) { struct hvc_struct *hp; diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 9b07f7851061..f2e5cb1bedf3 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2251,19 +2251,19 @@ static int __devinit ipmi_of_probe(struct of_device *dev, return ret; } - regsize = get_property(np, "reg-size", &proplen); + regsize = of_get_property(np, "reg-size", &proplen); if (regsize && proplen != 4) { dev_warn(&dev->dev, PFX "invalid regsize from OF\n"); return -EINVAL; } - regspacing = get_property(np, "reg-spacing", &proplen); + regspacing = of_get_property(np, "reg-spacing", &proplen); if (regspacing && proplen != 4) { dev_warn(&dev->dev, PFX "invalid regspacing from OF\n"); return -EINVAL; } - regshift = get_property(np, "reg-shift", &proplen); + regshift = of_get_property(np, "reg-shift", &proplen); if (regshift && proplen != 4) { dev_warn(&dev->dev, PFX "invalid regshift from OF\n"); return -EINVAL; diff --git a/drivers/macintosh/adb-iop.c b/drivers/macintosh/adb-iop.c index 17ef5d3c01b4..444696625171 100644 --- a/drivers/macintosh/adb-iop.c +++ b/drivers/macintosh/adb-iop.c @@ -19,7 +19,6 @@ #include <linux/init.h> #include <linux/proc_fs.h> -#include <asm/bootinfo.h> #include <asm/macintosh.h> #include <asm/macints.h> #include <asm/mac_iop.h> diff --git a/drivers/macintosh/ans-lcd.c b/drivers/macintosh/ans-lcd.c index e54c4d9f6365..73c50bc02095 100644 --- a/drivers/macintosh/ans-lcd.c +++ b/drivers/macintosh/ans-lcd.c @@ -14,9 +14,10 @@ #include <asm/uaccess.h> #include <asm/sections.h> #include <asm/prom.h> -#include <asm/ans-lcd.h> #include <asm/io.h> +#include "ans-lcd.h" + #define ANSLCD_ADDR 0xf301c000 #define ANSLCD_CTRL_IX 0x00 #define ANSLCD_DATA_IX 0x10 diff --git a/include/asm-ppc/ans-lcd.h b/drivers/macintosh/ans-lcd.h index d795b9fd2db6..d795b9fd2db6 100644 --- a/include/asm-ppc/ans-lcd.h +++ b/drivers/macintosh/ans-lcd.h diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index f25685b9b7cf..276945d51513 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -379,13 +379,10 @@ static int attach_one_thermostat(struct i2c_adapter *adapter, int addr, if (thermostat) return 0; - th = (struct thermostat *) - kmalloc(sizeof(struct thermostat), GFP_KERNEL); - + th = kzalloc(sizeof(struct thermostat), GFP_KERNEL); if (!th) return -ENOMEM; - memset(th, 0, sizeof(*th)); th->clt.addr = addr; th->clt.adapter = adapter; th->clt.driver = &thermostat_driver; diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 04f3973e3874..f7c509b7a8ea 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -410,7 +410,7 @@ static int __init via_pmu_start(void) irq = irq_of_parse_and_map(vias, 0); if (irq == NO_IRQ) { - printk(KERN_ERR "via-pmu: can't map interruptn"); + printk(KERN_ERR "via-pmu: can't map interrupt\n"); return -ENODEV; } if (request_irq(irq, via_pmu_interrupt, 0, "VIA-PMU", (void *)0)) { diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c index 351982bcec1b..f449d775cdf4 100644 --- a/drivers/macintosh/windfarm_smu_sat.c +++ b/drivers/macintosh/windfarm_smu_sat.c @@ -380,10 +380,12 @@ static int __init sat_sensors_init(void) return i2c_add_driver(&wf_sat_driver); } +#if 0 /* uncomment when module_exit() below is uncommented */ static void __exit sat_sensors_exit(void) { i2c_del_driver(&wf_sat_driver); } +#endif module_init(sat_sensors_init); /*module_exit(sat_sensors_exit); Uncomment when cleanup is implemented */ diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index cc6c73442435..6cd132c75187 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -362,7 +362,7 @@ config MTD_WALNUT config MTD_EBONY tristate "Flash devices mapped on IBM 440GP Ebony" - depends on MTD_JEDECPROBE && EBONY + depends on MTD_JEDECPROBE && EBONY && !PPC_MERGE help This enables access routines for the flash chips on the IBM 440GP Ebony board. If you have one of these boards and would like to diff --git a/include/asm-powerpc/8xx_immap.h b/include/asm-powerpc/8xx_immap.h new file mode 100644 index 000000000000..1311cefdfd30 --- /dev/null +++ b/include/asm-powerpc/8xx_immap.h @@ -0,0 +1,564 @@ +/* + * MPC8xx Internal Memory Map + * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) + * + * The I/O on the MPC860 is comprised of blocks of special registers + * and the dual port ram for the Communication Processor Module. + * Within this space are functional units such as the SIU, memory + * controller, system timers, and other control functions. It is + * a combination that I found difficult to separate into logical + * functional files.....but anyone else is welcome to try. -- Dan + */ +#ifdef __KERNEL__ +#ifndef __IMMAP_8XX__ +#define __IMMAP_8XX__ + +/* System configuration registers. +*/ +typedef struct sys_conf { + uint sc_siumcr; + uint sc_sypcr; + uint sc_swt; + char res1[2]; + ushort sc_swsr; + uint sc_sipend; + uint sc_simask; + uint sc_siel; + uint sc_sivec; + uint sc_tesr; + char res2[0xc]; + uint sc_sdcr; + char res3[0x4c]; +} sysconf8xx_t; + +/* PCMCIA configuration registers. +*/ +typedef struct pcmcia_conf { + uint pcmc_pbr0; + uint pcmc_por0; + uint pcmc_pbr1; + uint pcmc_por1; + uint pcmc_pbr2; + uint pcmc_por2; + uint pcmc_pbr3; + uint pcmc_por3; + uint pcmc_pbr4; + uint pcmc_por4; + uint pcmc_pbr5; + uint pcmc_por5; + uint pcmc_pbr6; + uint pcmc_por6; + uint pcmc_pbr7; + uint pcmc_por7; + char res1[0x20]; + uint pcmc_pgcra; + uint pcmc_pgcrb; + uint pcmc_pscr; + char res2[4]; + uint pcmc_pipr; + char res3[4]; + uint pcmc_per; + char res4[4]; +} pcmconf8xx_t; + +/* Memory controller registers. +*/ +typedef struct mem_ctlr { + uint memc_br0; + uint memc_or0; + uint memc_br1; + uint memc_or1; + uint memc_br2; + uint memc_or2; + uint memc_br3; + uint memc_or3; + uint memc_br4; + uint memc_or4; + uint memc_br5; + uint memc_or5; + uint memc_br6; + uint memc_or6; + uint memc_br7; + uint memc_or7; + char res1[0x24]; + uint memc_mar; + uint memc_mcr; + char res2[4]; + uint memc_mamr; + uint memc_mbmr; + ushort memc_mstat; + ushort memc_mptpr; + uint memc_mdr; + char res3[0x80]; +} memctl8xx_t; + +/*----------------------------------------------------------------------- + * BR - Memory Controler: Base Register 16-9 + */ +#define BR_BA_MSK 0xffff8000 /* Base Address Mask */ +#define BR_AT_MSK 0x00007000 /* Address Type Mask */ +#define BR_PS_MSK 0x00000c00 /* Port Size Mask */ +#define BR_PS_32 0x00000000 /* 32 bit port size */ +#define BR_PS_16 0x00000800 /* 16 bit port size */ +#define BR_PS_8 0x00000400 /* 8 bit port size */ +#define BR_PARE 0x00000200 /* Parity Enable */ +#define BR_WP 0x00000100 /* Write Protect */ +#define BR_MS_MSK 0x000000c0 /* Machine Select Mask */ +#define BR_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */ +#define BR_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */ +#define BR_MS_UPMB 0x000000c0 /* U.P.M.B Machine Select */ +#define BR_V 0x00000001 /* Bank Valid */ + +/*----------------------------------------------------------------------- + * OR - Memory Controler: Option Register 16-11 + */ +#define OR_AM_MSK 0xffff8000 /* Address Mask Mask */ +#define OR_ATM_MSK 0x00007000 /* Address Type Mask Mask */ +#define OR_CSNT_SAM 0x00000800 /* Chip Select Negation Time/ Start */ + /* Address Multiplex */ +#define OR_ACS_MSK 0x00000600 /* Address to Chip Select Setup mask */ +#define OR_ACS_DIV1 0x00000000 /* CS is output at the same time */ +#define OR_ACS_DIV4 0x00000400 /* CS is output 1/4 a clock later */ +#define OR_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later */ +#define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */ +#define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/ +#define OR_BI 0x00000100 /* Burst inhibit */ +#define OR_SCY_MSK 0x000000f0 /* Cycle Lenght in Clocks */ +#define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */ +#define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */ +#define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */ +#define OR_SCY_3_CLK 0x00000030 /* 3 clock cycles wait states */ +#define OR_SCY_4_CLK 0x00000040 /* 4 clock cycles wait states */ +#define OR_SCY_5_CLK 0x00000050 /* 5 clock cycles wait states */ +#define OR_SCY_6_CLK 0x00000060 /* 6 clock cycles wait states */ +#define OR_SCY_7_CLK 0x00000070 /* 7 clock cycles wait states */ +#define OR_SCY_8_CLK 0x00000080 /* 8 clock cycles wait states */ +#define OR_SCY_9_CLK 0x00000090 /* 9 clock cycles wait states */ +#define OR_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */ +#define OR_SCY_11_CLK 0x000000b0 /* 11 clock cycles wait states */ +#define OR_SCY_12_CLK 0x000000c0 /* 12 clock cycles wait states */ +#define OR_SCY_13_CLK 0x000000d0 /* 13 clock cycles wait states */ +#define OR_SCY_14_CLK 0x000000e0 /* 14 clock cycles wait states */ +#define OR_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */ +#define OR_SETA 0x00000008 /* External Transfer Acknowledge */ +#define OR_TRLX 0x00000004 /* Timing Relaxed */ +#define OR_EHTR 0x00000002 /* Extended Hold Time on Read */ + +/* System Integration Timers. +*/ +typedef struct sys_int_timers { + ushort sit_tbscr; + char res0[0x02]; + uint sit_tbreff0; + uint sit_tbreff1; + char res1[0x14]; + ushort sit_rtcsc; + char res2[0x02]; + uint sit_rtc; + uint sit_rtsec; + uint sit_rtcal; + char res3[0x10]; + ushort sit_piscr; + char res4[2]; + uint sit_pitc; + uint sit_pitr; + char res5[0x34]; +} sit8xx_t; + +#define TBSCR_TBIRQ_MASK ((ushort)0xff00) +#define TBSCR_REFA ((ushort)0x0080) +#define TBSCR_REFB ((ushort)0x0040) +#define TBSCR_REFAE ((ushort)0x0008) +#define TBSCR_REFBE ((ushort)0x0004) +#define TBSCR_TBF ((ushort)0x0002) +#define TBSCR_TBE ((ushort)0x0001) + +#define RTCSC_RTCIRQ_MASK ((ushort)0xff00) +#define RTCSC_SEC ((ushort)0x0080) +#define RTCSC_ALR ((ushort)0x0040) +#define RTCSC_38K ((ushort)0x0010) +#define RTCSC_SIE ((ushort)0x0008) +#define RTCSC_ALE ((ushort)0x0004) +#define RTCSC_RTF ((ushort)0x0002) +#define RTCSC_RTE ((ushort)0x0001) + +#define PISCR_PIRQ_MASK ((ushort)0xff00) +#define PISCR_PS ((ushort)0x0080) +#define PISCR_PIE ((ushort)0x0004) +#define PISCR_PTF ((ushort)0x0002) +#define PISCR_PTE ((ushort)0x0001) + +/* Clocks and Reset. +*/ +typedef struct clk_and_reset { + uint car_sccr; + uint car_plprcr; + uint car_rsr; + char res[0x74]; /* Reserved area */ +} car8xx_t; + +/* System Integration Timers keys. +*/ +typedef struct sitk { + uint sitk_tbscrk; + uint sitk_tbreff0k; + uint sitk_tbreff1k; + uint sitk_tbk; + char res1[0x10]; + uint sitk_rtcsck; + uint sitk_rtck; + uint sitk_rtseck; + uint sitk_rtcalk; + char res2[0x10]; + uint sitk_piscrk; + uint sitk_pitck; + char res3[0x38]; +} sitk8xx_t; + +/* Clocks and reset keys. +*/ +typedef struct cark { + uint cark_sccrk; + uint cark_plprcrk; + uint cark_rsrk; + char res[0x474]; +} cark8xx_t; + +/* The key to unlock registers maintained by keep-alive power. +*/ +#define KAPWR_KEY ((unsigned int)0x55ccaa33) + +/* Video interface. MPC823 Only. +*/ +typedef struct vid823 { + ushort vid_vccr; + ushort res1; + u_char vid_vsr; + u_char res2; + u_char vid_vcmr; + u_char res3; + uint vid_vbcb; + uint res4; + uint vid_vfcr0; + uint vid_vfaa0; + uint vid_vfba0; + uint vid_vfcr1; + uint vid_vfaa1; + uint vid_vfba1; + u_char res5[0x18]; +} vid823_t; + +/* LCD interface. 823 Only. +*/ +typedef struct lcd { + uint lcd_lccr; + uint lcd_lchcr; + uint lcd_lcvcr; + char res1[4]; + uint lcd_lcfaa; + uint lcd_lcfba; + char lcd_lcsr; + char res2[0x7]; +} lcd823_t; + +/* I2C +*/ +typedef struct i2c { + u_char i2c_i2mod; + char res1[3]; + u_char i2c_i2add; + char res2[3]; + u_char i2c_i2brg; + char res3[3]; + u_char i2c_i2com; + char res4[3]; + u_char i2c_i2cer; + char res5[3]; + u_char i2c_i2cmr; + char res6[0x8b]; +} i2c8xx_t; + +/* DMA control/status registers. +*/ +typedef struct sdma_csr { + char res1[4]; + uint sdma_sdar; + u_char sdma_sdsr; + char res3[3]; + u_char sdma_sdmr; + char res4[3]; + u_char sdma_idsr1; + char res5[3]; + u_char sdma_idmr1; + char res6[3]; + u_char sdma_idsr2; + char res7[3]; + u_char sdma_idmr2; + char res8[0x13]; +} sdma8xx_t; + +/* Communication Processor Module Interrupt Controller. +*/ +typedef struct cpm_ic { + ushort cpic_civr; + char res[0xe]; + uint cpic_cicr; + uint cpic_cipr; + uint cpic_cimr; + uint cpic_cisr; +} cpic8xx_t; + +/* Input/Output Port control/status registers. +*/ +typedef struct io_port { + ushort iop_padir; + ushort iop_papar; + ushort iop_paodr; + ushort iop_padat; + char res1[8]; + ushort iop_pcdir; + ushort iop_pcpar; + ushort iop_pcso; + ushort iop_pcdat; + ushort iop_pcint; + char res2[6]; + ushort iop_pddir; + ushort iop_pdpar; + char res3[2]; + ushort iop_pddat; + uint utmode; + char res4[4]; +} iop8xx_t; + +/* Communication Processor Module Timers +*/ +typedef struct cpm_timers { + ushort cpmt_tgcr; + char res1[0xe]; + ushort cpmt_tmr1; + ushort cpmt_tmr2; + ushort cpmt_trr1; + ushort cpmt_trr2; + ushort cpmt_tcr1; + ushort cpmt_tcr2; + ushort cpmt_tcn1; + ushort cpmt_tcn2; + ushort cpmt_tmr3; + ushort cpmt_tmr4; + ushort cpmt_trr3; + ushort cpmt_trr4; + ushort cpmt_tcr3; + ushort cpmt_tcr4; + ushort cpmt_tcn3; + ushort cpmt_tcn4; + ushort cpmt_ter1; + ushort cpmt_ter2; + ushort cpmt_ter3; + ushort cpmt_ter4; + char res2[8]; +} cpmtimer8xx_t; + +/* Finally, the Communication Processor stuff..... +*/ +typedef struct scc { /* Serial communication channels */ + uint scc_gsmrl; + uint scc_gsmrh; + ushort scc_psmr; + char res1[2]; + ushort scc_todr; + ushort scc_dsr; + ushort scc_scce; + char res2[2]; + ushort scc_sccm; + char res3; + u_char scc_sccs; + char res4[8]; +} scc_t; + +typedef struct smc { /* Serial management channels */ + char res1[2]; + ushort smc_smcmr; + char res2[2]; + u_char smc_smce; + char res3[3]; + u_char smc_smcm; + char res4[5]; +} smc_t; + +/* MPC860T Fast Ethernet Controller. It isn't part of the CPM, but + * it fits within the address space. + */ + +typedef struct fec { + uint fec_addr_low; /* lower 32 bits of station address */ + ushort fec_addr_high; /* upper 16 bits of station address */ + ushort res1; /* reserved */ + uint fec_hash_table_high; /* upper 32-bits of hash table */ + uint fec_hash_table_low; /* lower 32-bits of hash table */ + uint fec_r_des_start; /* beginning of Rx descriptor ring */ + uint fec_x_des_start; /* beginning of Tx descriptor ring */ + uint fec_r_buff_size; /* Rx buffer size */ + uint res2[9]; /* reserved */ + uint fec_ecntrl; /* ethernet control register */ + uint fec_ievent; /* interrupt event register */ + uint fec_imask; /* interrupt mask register */ + uint fec_ivec; /* interrupt level and vector status */ + uint fec_r_des_active; /* Rx ring updated flag */ + uint fec_x_des_active; /* Tx ring updated flag */ + uint res3[10]; /* reserved */ + uint fec_mii_data; /* MII data register */ + uint fec_mii_speed; /* MII speed control register */ + uint res4[17]; /* reserved */ + uint fec_r_bound; /* end of RAM (read-only) */ + uint fec_r_fstart; /* Rx FIFO start address */ + uint res5[6]; /* reserved */ + uint fec_x_fstart; /* Tx FIFO start address */ + uint res6[17]; /* reserved */ + uint fec_fun_code; /* fec SDMA function code */ + uint res7[3]; /* reserved */ + uint fec_r_cntrl; /* Rx control register */ + uint fec_r_hash; /* Rx hash register */ + uint res8[14]; /* reserved */ + uint fec_x_cntrl; /* Tx control register */ + uint res9[0x1e]; /* reserved */ +} fec_t; + +/* The FEC and LCD color map share the same address space.... + * I guess we will never see an 823T :-). + */ +union fec_lcd { + fec_t fl_un_fec; + u_char fl_un_cmap[0x200]; +}; + +typedef struct comm_proc { + /* General control and status registers. + */ + ushort cp_cpcr; + u_char res1[2]; + ushort cp_rccr; + u_char res2; + u_char cp_rmds; + u_char res3[4]; + ushort cp_cpmcr1; + ushort cp_cpmcr2; + ushort cp_cpmcr3; + ushort cp_cpmcr4; + u_char res4[2]; + ushort cp_rter; + u_char res5[2]; + ushort cp_rtmr; + u_char res6[0x14]; + + /* Baud rate generators. + */ + uint cp_brgc1; + uint cp_brgc2; + uint cp_brgc3; + uint cp_brgc4; + + /* Serial Communication Channels. + */ + scc_t cp_scc[4]; + + /* Serial Management Channels. + */ + smc_t cp_smc[2]; + + /* Serial Peripheral Interface. + */ + ushort cp_spmode; + u_char res7[4]; + u_char cp_spie; + u_char res8[3]; + u_char cp_spim; + u_char res9[2]; + u_char cp_spcom; + u_char res10[2]; + + /* Parallel Interface Port. + */ + u_char res11[2]; + ushort cp_pipc; + u_char res12[2]; + ushort cp_ptpr; + uint cp_pbdir; + uint cp_pbpar; + u_char res13[2]; + ushort cp_pbodr; + uint cp_pbdat; + + /* Port E - MPC87x/88x only. + */ + uint cp_pedir; + uint cp_pepar; + uint cp_peso; + uint cp_peodr; + uint cp_pedat; + + /* Communications Processor Timing Register - + Contains RMII Timing for the FECs on MPC87x/88x only. + */ + uint cp_cptr; + + /* Serial Interface and Time Slot Assignment. + */ + uint cp_simode; + u_char cp_sigmr; + u_char res15; + u_char cp_sistr; + u_char cp_sicmr; + u_char res16[4]; + uint cp_sicr; + uint cp_sirp; + u_char res17[0xc]; + + /* 256 bytes of MPC823 video controller RAM array. + */ + u_char cp_vcram[0x100]; + u_char cp_siram[0x200]; + + /* The fast ethernet controller is not really part of the CPM, + * but it resides in the address space. + * The LCD color map is also here. + */ + union fec_lcd fl_un; +#define cp_fec fl_un.fl_un_fec +#define lcd_cmap fl_un.fl_un_cmap + char res18[0xE00]; + + /* The DUET family has a second FEC here */ + fec_t cp_fec2; +#define cp_fec1 cp_fec /* consistency macro */ + + /* Dual Ported RAM follows. + * There are many different formats for this memory area + * depending upon the devices used and options chosen. + * Some processors don't have all of it populated. + */ + u_char cp_dpmem[0x1C00]; /* BD / Data / ucode */ + u_char cp_dparam[0x400]; /* Parameter RAM */ +} cpm8xx_t; + +/* Internal memory map. +*/ +typedef struct immap { + sysconf8xx_t im_siu_conf; /* SIU Configuration */ + pcmconf8xx_t im_pcmcia; /* PCMCIA Configuration */ + memctl8xx_t im_memctl; /* Memory Controller */ + sit8xx_t im_sit; /* System integration timers */ + car8xx_t im_clkrst; /* Clocks and reset */ + sitk8xx_t im_sitk; /* Sys int timer keys */ + cark8xx_t im_clkrstk; /* Clocks and reset keys */ + vid823_t im_vid; /* Video (823 only) */ + lcd823_t im_lcd; /* LCD (823 only) */ + i2c8xx_t im_i2c; /* I2C control/status */ + sdma8xx_t im_sdma; /* SDMA control/status */ + cpic8xx_t im_cpic; /* CPM Interrupt Controller */ + iop8xx_t im_ioport; /* IO Port control/status */ + cpmtimer8xx_t im_cpmtimer; /* CPM timers */ + cpm8xx_t im_cpm; /* Communication processor */ +} immap_t; + +#endif /* __IMMAP_8XX__ */ +#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/atomic.h b/include/asm-powerpc/atomic.h index c44810b9d322..f3fc733758f5 100644 --- a/include/asm-powerpc/atomic.h +++ b/include/asm-powerpc/atomic.h @@ -5,7 +5,7 @@ * PowerPC atomic operations */ -typedef struct { volatile int counter; } atomic_t; +typedef struct { int counter; } atomic_t; #ifdef __KERNEL__ #include <linux/compiler.h> @@ -15,8 +15,19 @@ typedef struct { volatile int counter; } atomic_t; #define ATOMIC_INIT(i) { (i) } -#define atomic_read(v) ((v)->counter) -#define atomic_set(v,i) (((v)->counter) = (i)) +static __inline__ int atomic_read(const atomic_t *v) +{ + int t; + + __asm__ __volatile__("lwz%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter)); + + return t; +} + +static __inline__ void atomic_set(atomic_t *v, int i) +{ + __asm__ __volatile__("stw%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i)); +} static __inline__ void atomic_add(int a, atomic_t *v) { @@ -240,12 +251,23 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v) #ifdef __powerpc64__ -typedef struct { volatile long counter; } atomic64_t; +typedef struct { long counter; } atomic64_t; #define ATOMIC64_INIT(i) { (i) } -#define atomic64_read(v) ((v)->counter) -#define atomic64_set(v,i) (((v)->counter) = (i)) +static __inline__ long atomic64_read(const atomic64_t *v) +{ + long t; + + __asm__ __volatile__("ld%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter)); + + return t; +} + +static __inline__ void atomic64_set(atomic64_t *v, long i) +{ + __asm__ __volatile__("std%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i)); +} static __inline__ void atomic64_add(long a, atomic64_t *v) { diff --git a/include/asm-powerpc/commproc.h b/include/asm-powerpc/commproc.h new file mode 100644 index 000000000000..397248705e0e --- /dev/null +++ b/include/asm-powerpc/commproc.h @@ -0,0 +1,692 @@ +/* + * MPC8xx Communication Processor Module. + * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) + * + * This file contains structures and information for the communication + * processor channels. Some CPM control and status is available + * throught the MPC8xx internal memory map. See immap.h for details. + * This file only contains what I need for the moment, not the total + * CPM capabilities. I (or someone else) will add definitions as they + * are needed. -- Dan + * + * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 + * bytes of the DP RAM and relocates the I2C parameter area to the + * IDMA1 space. The remaining DP RAM is available for buffer descriptors + * or other use. + */ +#ifndef __CPM_8XX__ +#define __CPM_8XX__ + +#include <asm/8xx_immap.h> +#include <asm/ptrace.h> + +/* CPM Command register. +*/ +#define CPM_CR_RST ((ushort)0x8000) +#define CPM_CR_OPCODE ((ushort)0x0f00) +#define CPM_CR_CHAN ((ushort)0x00f0) +#define CPM_CR_FLG ((ushort)0x0001) + +/* Some commands (there are more...later) +*/ +#define CPM_CR_INIT_TRX ((ushort)0x0000) +#define CPM_CR_INIT_RX ((ushort)0x0001) +#define CPM_CR_INIT_TX ((ushort)0x0002) +#define CPM_CR_HUNT_MODE ((ushort)0x0003) +#define CPM_CR_STOP_TX ((ushort)0x0004) +#define CPM_CR_GRA_STOP_TX ((ushort)0x0005) +#define CPM_CR_RESTART_TX ((ushort)0x0006) +#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007) +#define CPM_CR_SET_GADDR ((ushort)0x0008) +#define CPM_CR_SET_TIMER CPM_CR_SET_GADDR + +/* Channel numbers. +*/ +#define CPM_CR_CH_SCC1 ((ushort)0x0000) +#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */ +#define CPM_CR_CH_SCC2 ((ushort)0x0004) +#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / IDMA2 / Timers */ +#define CPM_CR_CH_TIMER CPM_CR_CH_SPI +#define CPM_CR_CH_SCC3 ((ushort)0x0008) +#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */ +#define CPM_CR_CH_SCC4 ((ushort)0x000c) +#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */ + +#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) + +/* The dual ported RAM is multi-functional. Some areas can be (and are + * being) used for microcode. There is an area that can only be used + * as data ram for buffer descriptors, which is all we use right now. + * Currently the first 512 and last 256 bytes are used for microcode. + */ +#define CPM_DATAONLY_BASE ((uint)0x0800) +#define CPM_DATAONLY_SIZE ((uint)0x0700) +#define CPM_DP_NOSPACE ((uint)0x7fffffff) + +/* Export the base address of the communication processor registers + * and dual port ram. + */ +extern cpm8xx_t *cpmp; /* Pointer to comm processor */ +extern unsigned long cpm_dpalloc(uint size, uint align); +extern int cpm_dpfree(unsigned long offset); +extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align); +extern void cpm_dpdump(void); +extern void *cpm_dpram_addr(unsigned long offset); +extern uint cpm_dpram_phys(u8* addr); +extern void cpm_setbrg(uint brg, uint rate); + +extern uint m8xx_cpm_hostalloc(uint size); +extern int m8xx_cpm_hostfree(uint start); +extern void m8xx_cpm_hostdump(void); + +extern void cpm_load_patch(volatile immap_t *immr); + +/* Buffer descriptors used by many of the CPM protocols. +*/ +typedef struct cpm_buf_desc { + ushort cbd_sc; /* Status and Control */ + ushort cbd_datlen; /* Data length in buffer */ + uint cbd_bufaddr; /* Buffer address in host memory */ +} cbd_t; + +#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */ +#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ +#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */ +#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ +#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */ +#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */ +#define BD_SC_CM ((ushort)0x0200) /* Continous mode */ +#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */ +#define BD_SC_P ((ushort)0x0100) /* xmt preamble */ +#define BD_SC_BR ((ushort)0x0020) /* Break received */ +#define BD_SC_FR ((ushort)0x0010) /* Framing error */ +#define BD_SC_PR ((ushort)0x0008) /* Parity error */ +#define BD_SC_NAK ((ushort)0x0004) /* NAK - did not respond */ +#define BD_SC_OV ((ushort)0x0002) /* Overrun */ +#define BD_SC_UN ((ushort)0x0002) /* Underrun */ +#define BD_SC_CD ((ushort)0x0001) /* ?? */ +#define BD_SC_CL ((ushort)0x0001) /* Collision */ + +/* Parameter RAM offsets. +*/ +#define PROFF_SCC1 ((uint)0x0000) +#define PROFF_IIC ((uint)0x0080) +#define PROFF_SCC2 ((uint)0x0100) +#define PROFF_SPI ((uint)0x0180) +#define PROFF_SCC3 ((uint)0x0200) +#define PROFF_SMC1 ((uint)0x0280) +#define PROFF_SCC4 ((uint)0x0300) +#define PROFF_SMC2 ((uint)0x0380) + +/* Define enough so I can at least use the serial port as a UART. + * The MBX uses SMC1 as the host serial port. + */ +typedef struct smc_uart { + ushort smc_rbase; /* Rx Buffer descriptor base address */ + ushort smc_tbase; /* Tx Buffer descriptor base address */ + u_char smc_rfcr; /* Rx function code */ + u_char smc_tfcr; /* Tx function code */ + ushort smc_mrblr; /* Max receive buffer length */ + uint smc_rstate; /* Internal */ + uint smc_idp; /* Internal */ + ushort smc_rbptr; /* Internal */ + ushort smc_ibc; /* Internal */ + uint smc_rxtmp; /* Internal */ + uint smc_tstate; /* Internal */ + uint smc_tdp; /* Internal */ + ushort smc_tbptr; /* Internal */ + ushort smc_tbc; /* Internal */ + uint smc_txtmp; /* Internal */ + ushort smc_maxidl; /* Maximum idle characters */ + ushort smc_tmpidl; /* Temporary idle counter */ + ushort smc_brklen; /* Last received break length */ + ushort smc_brkec; /* rcv'd break condition counter */ + ushort smc_brkcr; /* xmt break count register */ + ushort smc_rmask; /* Temporary bit mask */ + char res1[8]; /* Reserved */ + ushort smc_rpbase; /* Relocation pointer */ +} smc_uart_t; + +/* Function code bits. +*/ +#define SMC_EB ((u_char)0x10) /* Set big endian byte order */ + +/* SMC uart mode register. +*/ +#define SMCMR_REN ((ushort)0x0001) +#define SMCMR_TEN ((ushort)0x0002) +#define SMCMR_DM ((ushort)0x000c) +#define SMCMR_SM_GCI ((ushort)0x0000) +#define SMCMR_SM_UART ((ushort)0x0020) +#define SMCMR_SM_TRANS ((ushort)0x0030) +#define SMCMR_SM_MASK ((ushort)0x0030) +#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ +#define SMCMR_REVD SMCMR_PM_EVEN +#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ +#define SMCMR_BS SMCMR_PEN +#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ +#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ +#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) + +/* SMC2 as Centronics parallel printer. It is half duplex, in that + * it can only receive or transmit. The parameter ram values for + * each direction are either unique or properly overlap, so we can + * include them in one structure. + */ +typedef struct smc_centronics { + ushort scent_rbase; + ushort scent_tbase; + u_char scent_cfcr; + u_char scent_smask; + ushort scent_mrblr; + uint scent_rstate; + uint scent_r_ptr; + ushort scent_rbptr; + ushort scent_r_cnt; + uint scent_rtemp; + uint scent_tstate; + uint scent_t_ptr; + ushort scent_tbptr; + ushort scent_t_cnt; + uint scent_ttemp; + ushort scent_max_sl; + ushort scent_sl_cnt; + ushort scent_character1; + ushort scent_character2; + ushort scent_character3; + ushort scent_character4; + ushort scent_character5; + ushort scent_character6; + ushort scent_character7; + ushort scent_character8; + ushort scent_rccm; + ushort scent_rccr; +} smc_cent_t; + +/* Centronics Status Mask Register. +*/ +#define SMC_CENT_F ((u_char)0x08) +#define SMC_CENT_PE ((u_char)0x04) +#define SMC_CENT_S ((u_char)0x02) + +/* SMC Event and Mask register. +*/ +#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ +#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ +#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */ +#define SMCM_BSY ((unsigned char)0x04) +#define SMCM_TX ((unsigned char)0x02) +#define SMCM_RX ((unsigned char)0x01) + +/* Baud rate generators. +*/ +#define CPM_BRG_RST ((uint)0x00020000) +#define CPM_BRG_EN ((uint)0x00010000) +#define CPM_BRG_EXTC_INT ((uint)0x00000000) +#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000) +#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000) +#define CPM_BRG_ATB ((uint)0x00002000) +#define CPM_BRG_CD_MASK ((uint)0x00001ffe) +#define CPM_BRG_DIV16 ((uint)0x00000001) + +/* SI Clock Route Register +*/ +#define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000) +#define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000) +#define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800) +#define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100) +#define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000) +#define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000) +#define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000) +#define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000) + +/* SCCs. +*/ +#define SCC_GSMRH_IRP ((uint)0x00040000) +#define SCC_GSMRH_GDE ((uint)0x00010000) +#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) +#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) +#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) +#define SCC_GSMRH_REVD ((uint)0x00002000) +#define SCC_GSMRH_TRX ((uint)0x00001000) +#define SCC_GSMRH_TTX ((uint)0x00000800) +#define SCC_GSMRH_CDP ((uint)0x00000400) +#define SCC_GSMRH_CTSP ((uint)0x00000200) +#define SCC_GSMRH_CDS ((uint)0x00000100) +#define SCC_GSMRH_CTSS ((uint)0x00000080) +#define SCC_GSMRH_TFL ((uint)0x00000040) +#define SCC_GSMRH_RFW ((uint)0x00000020) +#define SCC_GSMRH_TXSY ((uint)0x00000010) +#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) +#define SCC_GSMRH_SYNL8 ((uint)0x00000008) +#define SCC_GSMRH_SYNL4 ((uint)0x00000004) +#define SCC_GSMRH_RTSM ((uint)0x00000002) +#define SCC_GSMRH_RSYN ((uint)0x00000001) + +#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ +#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) +#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) +#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) +#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) +#define SCC_GSMRL_TCI ((uint)0x10000000) +#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) +#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) +#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) +#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) +#define SCC_GSMRL_RINV ((uint)0x02000000) +#define SCC_GSMRL_TINV ((uint)0x01000000) +#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) +#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) +#define SCC_GSMRL_TPL_48 ((uint)0x00800000) +#define SCC_GSMRL_TPL_32 ((uint)0x00600000) +#define SCC_GSMRL_TPL_16 ((uint)0x00400000) +#define SCC_GSMRL_TPL_8 ((uint)0x00200000) +#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) +#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) +#define SCC_GSMRL_TPP_01 ((uint)0x00100000) +#define SCC_GSMRL_TPP_10 ((uint)0x00080000) +#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) +#define SCC_GSMRL_TEND ((uint)0x00040000) +#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) +#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) +#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) +#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) +#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) +#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) +#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) +#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) +#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) +#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) +#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) +#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) +#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) +#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) +#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ +#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) +#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) +#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) +#define SCC_GSMRL_ENR ((uint)0x00000020) +#define SCC_GSMRL_ENT ((uint)0x00000010) +#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) +#define SCC_GSMRL_MODE_QMC ((uint)0x0000000a) +#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) +#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) +#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) +#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) +#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) +#define SCC_GSMRL_MODE_UART ((uint)0x00000004) +#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) +#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) +#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) + +#define SCC_TODR_TOD ((ushort)0x8000) + +/* SCC Event and Mask register. +*/ +#define SCCM_TXE ((unsigned char)0x10) +#define SCCM_BSY ((unsigned char)0x04) +#define SCCM_TX ((unsigned char)0x02) +#define SCCM_RX ((unsigned char)0x01) + +typedef struct scc_param { + ushort scc_rbase; /* Rx Buffer descriptor base address */ + ushort scc_tbase; /* Tx Buffer descriptor base address */ + u_char scc_rfcr; /* Rx function code */ + u_char scc_tfcr; /* Tx function code */ + ushort scc_mrblr; /* Max receive buffer length */ + uint scc_rstate; /* Internal */ + uint scc_idp; /* Internal */ + ushort scc_rbptr; /* Internal */ + ushort scc_ibc; /* Internal */ + uint scc_rxtmp; /* Internal */ + uint scc_tstate; /* Internal */ + uint scc_tdp; /* Internal */ + ushort scc_tbptr; /* Internal */ + ushort scc_tbc; /* Internal */ + uint scc_txtmp; /* Internal */ + uint scc_rcrc; /* Internal */ + uint scc_tcrc; /* Internal */ +} sccp_t; + +/* Function code bits. +*/ +#define SCC_EB ((u_char)0x10) /* Set big endian byte order */ + +/* CPM Ethernet through SCCx. + */ +typedef struct scc_enet { + sccp_t sen_genscc; + uint sen_cpres; /* Preset CRC */ + uint sen_cmask; /* Constant mask for CRC */ + uint sen_crcec; /* CRC Error counter */ + uint sen_alec; /* alignment error counter */ + uint sen_disfc; /* discard frame counter */ + ushort sen_pads; /* Tx short frame pad character */ + ushort sen_retlim; /* Retry limit threshold */ + ushort sen_retcnt; /* Retry limit counter */ + ushort sen_maxflr; /* maximum frame length register */ + ushort sen_minflr; /* minimum frame length register */ + ushort sen_maxd1; /* maximum DMA1 length */ + ushort sen_maxd2; /* maximum DMA2 length */ + ushort sen_maxd; /* Rx max DMA */ + ushort sen_dmacnt; /* Rx DMA counter */ + ushort sen_maxb; /* Max BD byte count */ + ushort sen_gaddr1; /* Group address filter */ + ushort sen_gaddr2; + ushort sen_gaddr3; + ushort sen_gaddr4; + uint sen_tbuf0data0; /* Save area 0 - current frame */ + uint sen_tbuf0data1; /* Save area 1 - current frame */ + uint sen_tbuf0rba; /* Internal */ + uint sen_tbuf0crc; /* Internal */ + ushort sen_tbuf0bcnt; /* Internal */ + ushort sen_paddrh; /* physical address (MSB) */ + ushort sen_paddrm; + ushort sen_paddrl; /* physical address (LSB) */ + ushort sen_pper; /* persistence */ + ushort sen_rfbdptr; /* Rx first BD pointer */ + ushort sen_tfbdptr; /* Tx first BD pointer */ + ushort sen_tlbdptr; /* Tx last BD pointer */ + uint sen_tbuf1data0; /* Save area 0 - current frame */ + uint sen_tbuf1data1; /* Save area 1 - current frame */ + uint sen_tbuf1rba; /* Internal */ + uint sen_tbuf1crc; /* Internal */ + ushort sen_tbuf1bcnt; /* Internal */ + ushort sen_txlen; /* Tx Frame length counter */ + ushort sen_iaddr1; /* Individual address filter */ + ushort sen_iaddr2; + ushort sen_iaddr3; + ushort sen_iaddr4; + ushort sen_boffcnt; /* Backoff counter */ + + /* NOTE: Some versions of the manual have the following items + * incorrectly documented. Below is the proper order. + */ + ushort sen_taddrh; /* temp address (MSB) */ + ushort sen_taddrm; + ushort sen_taddrl; /* temp address (LSB) */ +} scc_enet_t; + +/* SCC Event register as used by Ethernet. +*/ +#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ +#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* SCC Mode Register (PMSR) as used by Ethernet. +*/ +#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ +#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ +#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ +#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ +#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ +#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ +#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ +#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ +#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ +#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ +#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ +#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ +#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ + +/* Buffer descriptor control/status used by Ethernet receive. +*/ +#define BD_ENET_RX_EMPTY ((ushort)0x8000) +#define BD_ENET_RX_WRAP ((ushort)0x2000) +#define BD_ENET_RX_INTR ((ushort)0x1000) +#define BD_ENET_RX_LAST ((ushort)0x0800) +#define BD_ENET_RX_FIRST ((ushort)0x0400) +#define BD_ENET_RX_MISS ((ushort)0x0100) +#define BD_ENET_RX_LG ((ushort)0x0020) +#define BD_ENET_RX_NO ((ushort)0x0010) +#define BD_ENET_RX_SH ((ushort)0x0008) +#define BD_ENET_RX_CR ((ushort)0x0004) +#define BD_ENET_RX_OV ((ushort)0x0002) +#define BD_ENET_RX_CL ((ushort)0x0001) +#define BD_ENET_RX_BC ((ushort)0x0080) /* DA is Broadcast */ +#define BD_ENET_RX_MC ((ushort)0x0040) /* DA is Multicast */ +#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */ + +/* Buffer descriptor control/status used by Ethernet transmit. +*/ +#define BD_ENET_TX_READY ((ushort)0x8000) +#define BD_ENET_TX_PAD ((ushort)0x4000) +#define BD_ENET_TX_WRAP ((ushort)0x2000) +#define BD_ENET_TX_INTR ((ushort)0x1000) +#define BD_ENET_TX_LAST ((ushort)0x0800) +#define BD_ENET_TX_TC ((ushort)0x0400) +#define BD_ENET_TX_DEF ((ushort)0x0200) +#define BD_ENET_TX_HB ((ushort)0x0100) +#define BD_ENET_TX_LC ((ushort)0x0080) +#define BD_ENET_TX_RL ((ushort)0x0040) +#define BD_ENET_TX_RCMASK ((ushort)0x003c) +#define BD_ENET_TX_UN ((ushort)0x0002) +#define BD_ENET_TX_CSL ((ushort)0x0001) +#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */ + +/* SCC as UART +*/ +typedef struct scc_uart { + sccp_t scc_genscc; + char res1[8]; /* Reserved */ + ushort scc_maxidl; /* Maximum idle chars */ + ushort scc_idlc; /* temp idle counter */ + ushort scc_brkcr; /* Break count register */ + ushort scc_parec; /* receive parity error counter */ + ushort scc_frmec; /* receive framing error counter */ + ushort scc_nosec; /* receive noise counter */ + ushort scc_brkec; /* receive break condition counter */ + ushort scc_brkln; /* last received break length */ + ushort scc_uaddr1; /* UART address character 1 */ + ushort scc_uaddr2; /* UART address character 2 */ + ushort scc_rtemp; /* Temp storage */ + ushort scc_toseq; /* Transmit out of sequence char */ + ushort scc_char1; /* control character 1 */ + ushort scc_char2; /* control character 2 */ + ushort scc_char3; /* control character 3 */ + ushort scc_char4; /* control character 4 */ + ushort scc_char5; /* control character 5 */ + ushort scc_char6; /* control character 6 */ + ushort scc_char7; /* control character 7 */ + ushort scc_char8; /* control character 8 */ + ushort scc_rccm; /* receive control character mask */ + ushort scc_rccr; /* receive control character register */ + ushort scc_rlbc; /* receive last break character */ +} scc_uart_t; + +/* SCC Event and Mask registers when it is used as a UART. +*/ +#define UART_SCCM_GLR ((ushort)0x1000) +#define UART_SCCM_GLT ((ushort)0x0800) +#define UART_SCCM_AB ((ushort)0x0200) +#define UART_SCCM_IDL ((ushort)0x0100) +#define UART_SCCM_GRA ((ushort)0x0080) +#define UART_SCCM_BRKE ((ushort)0x0040) +#define UART_SCCM_BRKS ((ushort)0x0020) +#define UART_SCCM_CCR ((ushort)0x0008) +#define UART_SCCM_BSY ((ushort)0x0004) +#define UART_SCCM_TX ((ushort)0x0002) +#define UART_SCCM_RX ((ushort)0x0001) + +/* The SCC PMSR when used as a UART. +*/ +#define SCU_PSMR_FLC ((ushort)0x8000) +#define SCU_PSMR_SL ((ushort)0x4000) +#define SCU_PSMR_CL ((ushort)0x3000) +#define SCU_PSMR_UM ((ushort)0x0c00) +#define SCU_PSMR_FRZ ((ushort)0x0200) +#define SCU_PSMR_RZS ((ushort)0x0100) +#define SCU_PSMR_SYN ((ushort)0x0080) +#define SCU_PSMR_DRT ((ushort)0x0040) +#define SCU_PSMR_PEN ((ushort)0x0010) +#define SCU_PSMR_RPM ((ushort)0x000c) +#define SCU_PSMR_REVP ((ushort)0x0008) +#define SCU_PSMR_TPM ((ushort)0x0003) +#define SCU_PSMR_TEVP ((ushort)0x0002) + +/* CPM Transparent mode SCC. + */ +typedef struct scc_trans { + sccp_t st_genscc; + uint st_cpres; /* Preset CRC */ + uint st_cmask; /* Constant mask for CRC */ +} scc_trans_t; + +#define BD_SCC_TX_LAST ((ushort)0x0800) + +/* IIC parameter RAM. +*/ +typedef struct iic { + ushort iic_rbase; /* Rx Buffer descriptor base address */ + ushort iic_tbase; /* Tx Buffer descriptor base address */ + u_char iic_rfcr; /* Rx function code */ + u_char iic_tfcr; /* Tx function code */ + ushort iic_mrblr; /* Max receive buffer length */ + uint iic_rstate; /* Internal */ + uint iic_rdp; /* Internal */ + ushort iic_rbptr; /* Internal */ + ushort iic_rbc; /* Internal */ + uint iic_rxtmp; /* Internal */ + uint iic_tstate; /* Internal */ + uint iic_tdp; /* Internal */ + ushort iic_tbptr; /* Internal */ + ushort iic_tbc; /* Internal */ + uint iic_txtmp; /* Internal */ + char res1[4]; /* Reserved */ + ushort iic_rpbase; /* Relocation pointer */ + char res2[2]; /* Reserved */ +} iic_t; + +#define BD_IIC_START ((ushort)0x0400) + +/* SPI parameter RAM. +*/ +typedef struct spi { + ushort spi_rbase; /* Rx Buffer descriptor base address */ + ushort spi_tbase; /* Tx Buffer descriptor base address */ + u_char spi_rfcr; /* Rx function code */ + u_char spi_tfcr; /* Tx function code */ + ushort spi_mrblr; /* Max receive buffer length */ + uint spi_rstate; /* Internal */ + uint spi_rdp; /* Internal */ + ushort spi_rbptr; /* Internal */ + ushort spi_rbc; /* Internal */ + uint spi_rxtmp; /* Internal */ + uint spi_tstate; /* Internal */ + uint spi_tdp; /* Internal */ + ushort spi_tbptr; /* Internal */ + ushort spi_tbc; /* Internal */ + uint spi_txtmp; /* Internal */ + uint spi_res; + ushort spi_rpbase; /* Relocation pointer */ + ushort spi_res2; +} spi_t; + +/* SPI Mode register. +*/ +#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ +#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ +#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ +#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ +#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ +#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ +#define SPMODE_EN ((ushort)0x0100) /* Enable */ +#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ +#define SPMODE_LEN4 ((ushort)0x0030) /* 4 bits per char */ +#define SPMODE_LEN8 ((ushort)0x0070) /* 8 bits per char */ +#define SPMODE_LEN16 ((ushort)0x00f0) /* 16 bits per char */ +#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ + +/* SPIE fields */ +#define SPIE_MME 0x20 +#define SPIE_TXE 0x10 +#define SPIE_BSY 0x04 +#define SPIE_TXB 0x02 +#define SPIE_RXB 0x01 + +/* + * RISC Controller Configuration Register definitons + */ +#define RCCR_TIME 0x8000 /* RISC Timer Enable */ +#define RCCR_TIMEP(t) (((t) & 0x3F)<<8) /* RISC Timer Period */ +#define RCCR_TIME_MASK 0x00FF /* not RISC Timer related bits */ + +/* RISC Timer Parameter RAM offset */ +#define PROFF_RTMR ((uint)0x01B0) + +typedef struct risc_timer_pram { + unsigned short tm_base; /* RISC Timer Table Base Address */ + unsigned short tm_ptr; /* RISC Timer Table Pointer (internal) */ + unsigned short r_tmr; /* RISC Timer Mode Register */ + unsigned short r_tmv; /* RISC Timer Valid Register */ + unsigned long tm_cmd; /* RISC Timer Command Register */ + unsigned long tm_cnt; /* RISC Timer Internal Count */ +} rt_pram_t; + +/* Bits in RISC Timer Command Register */ +#define TM_CMD_VALID 0x80000000 /* Valid - Enables the timer */ +#define TM_CMD_RESTART 0x40000000 /* Restart - for automatic restart */ +#define TM_CMD_PWM 0x20000000 /* Run in Pulse Width Modulation Mode */ +#define TM_CMD_NUM(n) (((n)&0xF)<<16) /* Timer Number */ +#define TM_CMD_PERIOD(p) ((p)&0xFFFF) /* Timer Period */ + +/* CPM interrupts. There are nearly 32 interrupts generated by CPM + * channels or devices. All of these are presented to the PPC core + * as a single interrupt. The CPM interrupt handler dispatches its + * own handlers, in a similar fashion to the PPC core handler. We + * use the table as defined in the manuals (i.e. no special high + * priority and SCC1 == SCCa, etc...). + */ +#define CPMVEC_NR 32 +#define CPMVEC_PIO_PC15 ((ushort)0x1f) +#define CPMVEC_SCC1 ((ushort)0x1e) +#define CPMVEC_SCC2 ((ushort)0x1d) +#define CPMVEC_SCC3 ((ushort)0x1c) +#define CPMVEC_SCC4 ((ushort)0x1b) +#define CPMVEC_PIO_PC14 ((ushort)0x1a) +#define CPMVEC_TIMER1 ((ushort)0x19) +#define CPMVEC_PIO_PC13 ((ushort)0x18) +#define CPMVEC_PIO_PC12 ((ushort)0x17) +#define CPMVEC_SDMA_CB_ERR ((ushort)0x16) +#define CPMVEC_IDMA1 ((ushort)0x15) +#define CPMVEC_IDMA2 ((ushort)0x14) +#define CPMVEC_TIMER2 ((ushort)0x12) +#define CPMVEC_RISCTIMER ((ushort)0x11) +#define CPMVEC_I2C ((ushort)0x10) +#define CPMVEC_PIO_PC11 ((ushort)0x0f) +#define CPMVEC_PIO_PC10 ((ushort)0x0e) +#define CPMVEC_TIMER3 ((ushort)0x0c) +#define CPMVEC_PIO_PC9 ((ushort)0x0b) +#define CPMVEC_PIO_PC8 ((ushort)0x0a) +#define CPMVEC_PIO_PC7 ((ushort)0x09) +#define CPMVEC_TIMER4 ((ushort)0x07) +#define CPMVEC_PIO_PC6 ((ushort)0x06) +#define CPMVEC_SPI ((ushort)0x05) +#define CPMVEC_SMC1 ((ushort)0x04) +#define CPMVEC_SMC2 ((ushort)0x03) +#define CPMVEC_PIO_PC5 ((ushort)0x02) +#define CPMVEC_PIO_PC4 ((ushort)0x01) +#define CPMVEC_ERROR ((ushort)0x00) + +/* CPM interrupt configuration vector. +*/ +#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ +#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ +#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ +#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ +#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrrupt */ +#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ +#define CICR_IEN ((uint)0x00000080) /* Int. enable */ +#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ + +extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id); +extern void cpm_free_handler(int vec); + +#endif /* __CPM_8XX__ */ diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h new file mode 100644 index 000000000000..12a2860f9a9c --- /dev/null +++ b/include/asm-powerpc/cpm2.h @@ -0,0 +1,1248 @@ +/* + * Communication Processor Module v2. + * + * This file contains structures and information for the communication + * processor channels found in the dual port RAM or parameter RAM. + * All CPM control and status is available through the CPM2 internal + * memory map. See immap_cpm2.h for details. + */ +#ifdef __KERNEL__ +#ifndef __CPM2__ +#define __CPM2__ + +#include <asm/immap_cpm2.h> + +/* CPM Command register. +*/ +#define CPM_CR_RST ((uint)0x80000000) +#define CPM_CR_PAGE ((uint)0x7c000000) +#define CPM_CR_SBLOCK ((uint)0x03e00000) +#define CPM_CR_FLG ((uint)0x00010000) +#define CPM_CR_MCN ((uint)0x00003fc0) +#define CPM_CR_OPCODE ((uint)0x0000000f) + +/* Device sub-block and page codes. +*/ +#define CPM_CR_SCC1_SBLOCK (0x04) +#define CPM_CR_SCC2_SBLOCK (0x05) +#define CPM_CR_SCC3_SBLOCK (0x06) +#define CPM_CR_SCC4_SBLOCK (0x07) +#define CPM_CR_SMC1_SBLOCK (0x08) +#define CPM_CR_SMC2_SBLOCK (0x09) +#define CPM_CR_SPI_SBLOCK (0x0a) +#define CPM_CR_I2C_SBLOCK (0x0b) +#define CPM_CR_TIMER_SBLOCK (0x0f) +#define CPM_CR_RAND_SBLOCK (0x0e) +#define CPM_CR_FCC1_SBLOCK (0x10) +#define CPM_CR_FCC2_SBLOCK (0x11) +#define CPM_CR_FCC3_SBLOCK (0x12) +#define CPM_CR_IDMA1_SBLOCK (0x14) +#define CPM_CR_IDMA2_SBLOCK (0x15) +#define CPM_CR_IDMA3_SBLOCK (0x16) +#define CPM_CR_IDMA4_SBLOCK (0x17) +#define CPM_CR_MCC1_SBLOCK (0x1c) + +#define CPM_CR_FCC_SBLOCK(x) (x + 0x10) + +#define CPM_CR_SCC1_PAGE (0x00) +#define CPM_CR_SCC2_PAGE (0x01) +#define CPM_CR_SCC3_PAGE (0x02) +#define CPM_CR_SCC4_PAGE (0x03) +#define CPM_CR_SMC1_PAGE (0x07) +#define CPM_CR_SMC2_PAGE (0x08) +#define CPM_CR_SPI_PAGE (0x09) +#define CPM_CR_I2C_PAGE (0x0a) +#define CPM_CR_TIMER_PAGE (0x0a) +#define CPM_CR_RAND_PAGE (0x0a) +#define CPM_CR_FCC1_PAGE (0x04) +#define CPM_CR_FCC2_PAGE (0x05) +#define CPM_CR_FCC3_PAGE (0x06) +#define CPM_CR_IDMA1_PAGE (0x07) +#define CPM_CR_IDMA2_PAGE (0x08) +#define CPM_CR_IDMA3_PAGE (0x09) +#define CPM_CR_IDMA4_PAGE (0x0a) +#define CPM_CR_MCC1_PAGE (0x07) +#define CPM_CR_MCC2_PAGE (0x08) + +#define CPM_CR_FCC_PAGE(x) (x + 0x04) + +/* Some opcodes (there are more...later) +*/ +#define CPM_CR_INIT_TRX ((ushort)0x0000) +#define CPM_CR_INIT_RX ((ushort)0x0001) +#define CPM_CR_INIT_TX ((ushort)0x0002) +#define CPM_CR_HUNT_MODE ((ushort)0x0003) +#define CPM_CR_STOP_TX ((ushort)0x0004) +#define CPM_CR_GRA_STOP_TX ((ushort)0x0005) +#define CPM_CR_RESTART_TX ((ushort)0x0006) +#define CPM_CR_SET_GADDR ((ushort)0x0008) +#define CPM_CR_START_IDMA ((ushort)0x0009) +#define CPM_CR_STOP_IDMA ((ushort)0x000b) + +#define mk_cr_cmd(PG, SBC, MCN, OP) \ + ((PG << 26) | (SBC << 21) | (MCN << 6) | OP) + +/* Dual Port RAM addresses. The first 16K is available for almost + * any CPM use, so we put the BDs there. The first 128 bytes are + * used for SMC1 and SMC2 parameter RAM, so we start allocating + * BDs above that. All of this must change when we start + * downloading RAM microcode. + */ +#define CPM_DATAONLY_BASE ((uint)128) +#define CPM_DP_NOSPACE ((uint)0x7fffffff) +#if defined(CONFIG_8272) || defined(CONFIG_MPC8555) +#define CPM_DATAONLY_SIZE ((uint)(8 * 1024) - CPM_DATAONLY_BASE) +#define CPM_FCC_SPECIAL_BASE ((uint)0x00009000) +#else +#define CPM_DATAONLY_SIZE ((uint)(16 * 1024) - CPM_DATAONLY_BASE) +#define CPM_FCC_SPECIAL_BASE ((uint)0x0000b000) +#endif + +/* The number of pages of host memory we allocate for CPM. This is + * done early in kernel initialization to get physically contiguous + * pages. + */ +#define NUM_CPM_HOST_PAGES 2 + +/* Export the base address of the communication processor registers + * and dual port ram. + */ +extern cpm_cpm2_t *cpmp; /* Pointer to comm processor */ + +extern unsigned long cpm_dpalloc(uint size, uint align); +extern int cpm_dpfree(unsigned long offset); +extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align); +extern void cpm_dpdump(void); +extern void *cpm_dpram_addr(unsigned long offset); +extern void cpm_setbrg(uint brg, uint rate); +extern void cpm2_fastbrg(uint brg, uint rate, int div16); +extern void cpm2_reset(void); + + +/* Buffer descriptors used by many of the CPM protocols. +*/ +typedef struct cpm_buf_desc { + ushort cbd_sc; /* Status and Control */ + ushort cbd_datlen; /* Data length in buffer */ + uint cbd_bufaddr; /* Buffer address in host memory */ +} cbd_t; + +#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */ +#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ +#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */ +#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ +#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */ +#define BD_SC_CM ((ushort)0x0200) /* Continous mode */ +#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */ +#define BD_SC_P ((ushort)0x0100) /* xmt preamble */ +#define BD_SC_BR ((ushort)0x0020) /* Break received */ +#define BD_SC_FR ((ushort)0x0010) /* Framing error */ +#define BD_SC_PR ((ushort)0x0008) /* Parity error */ +#define BD_SC_OV ((ushort)0x0002) /* Overrun */ +#define BD_SC_CD ((ushort)0x0001) /* ?? */ + +/* Function code bits, usually generic to devices. +*/ +#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */ +#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */ +#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */ +#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */ +#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */ + +/* Parameter RAM offsets from the base. +*/ +#define PROFF_SCC1 ((uint)0x8000) +#define PROFF_SCC2 ((uint)0x8100) +#define PROFF_SCC3 ((uint)0x8200) +#define PROFF_SCC4 ((uint)0x8300) +#define PROFF_FCC1 ((uint)0x8400) +#define PROFF_FCC2 ((uint)0x8500) +#define PROFF_FCC3 ((uint)0x8600) +#define PROFF_MCC1 ((uint)0x8700) +#define PROFF_SMC1_BASE ((uint)0x87fc) +#define PROFF_IDMA1_BASE ((uint)0x87fe) +#define PROFF_MCC2 ((uint)0x8800) +#define PROFF_SMC2_BASE ((uint)0x88fc) +#define PROFF_IDMA2_BASE ((uint)0x88fe) +#define PROFF_SPI_BASE ((uint)0x89fc) +#define PROFF_IDMA3_BASE ((uint)0x89fe) +#define PROFF_TIMERS ((uint)0x8ae0) +#define PROFF_REVNUM ((uint)0x8af0) +#define PROFF_RAND ((uint)0x8af8) +#define PROFF_I2C_BASE ((uint)0x8afc) +#define PROFF_IDMA4_BASE ((uint)0x8afe) + +#define PROFF_SCC_SIZE ((uint)0x100) +#define PROFF_FCC_SIZE ((uint)0x100) +#define PROFF_SMC_SIZE ((uint)64) + +/* The SMCs are relocated to any of the first eight DPRAM pages. + * We will fix these at the first locations of DPRAM, until we + * get some microcode patches :-). + * The parameter ram space for the SMCs is fifty-some bytes, and + * they are required to start on a 64 byte boundary. + */ +#define PROFF_SMC1 (0) +#define PROFF_SMC2 (64) + + +/* Define enough so I can at least use the serial port as a UART. + */ +typedef struct smc_uart { + ushort smc_rbase; /* Rx Buffer descriptor base address */ + ushort smc_tbase; /* Tx Buffer descriptor base address */ + u_char smc_rfcr; /* Rx function code */ + u_char smc_tfcr; /* Tx function code */ + ushort smc_mrblr; /* Max receive buffer length */ + uint smc_rstate; /* Internal */ + uint smc_idp; /* Internal */ + ushort smc_rbptr; /* Internal */ + ushort smc_ibc; /* Internal */ + uint smc_rxtmp; /* Internal */ + uint smc_tstate; /* Internal */ + uint smc_tdp; /* Internal */ + ushort smc_tbptr; /* Internal */ + ushort smc_tbc; /* Internal */ + uint smc_txtmp; /* Internal */ + ushort smc_maxidl; /* Maximum idle characters */ + ushort smc_tmpidl; /* Temporary idle counter */ + ushort smc_brklen; /* Last received break length */ + ushort smc_brkec; /* rcv'd break condition counter */ + ushort smc_brkcr; /* xmt break count register */ + ushort smc_rmask; /* Temporary bit mask */ + uint smc_stmp; /* SDMA Temp */ +} smc_uart_t; + +/* SMC uart mode register (Internal memory map). +*/ +#define SMCMR_REN ((ushort)0x0001) +#define SMCMR_TEN ((ushort)0x0002) +#define SMCMR_DM ((ushort)0x000c) +#define SMCMR_SM_GCI ((ushort)0x0000) +#define SMCMR_SM_UART ((ushort)0x0020) +#define SMCMR_SM_TRANS ((ushort)0x0030) +#define SMCMR_SM_MASK ((ushort)0x0030) +#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ +#define SMCMR_REVD SMCMR_PM_EVEN +#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ +#define SMCMR_BS SMCMR_PEN +#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ +#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ +#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) + +/* SMC Event and Mask register. +*/ +#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ +#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ +#define SMCM_TXE ((unsigned char)0x10) +#define SMCM_BSY ((unsigned char)0x04) +#define SMCM_TX ((unsigned char)0x02) +#define SMCM_RX ((unsigned char)0x01) + +/* Baud rate generators. +*/ +#define CPM_BRG_RST ((uint)0x00020000) +#define CPM_BRG_EN ((uint)0x00010000) +#define CPM_BRG_EXTC_INT ((uint)0x00000000) +#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000) +#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000) +#define CPM_BRG_ATB ((uint)0x00002000) +#define CPM_BRG_CD_MASK ((uint)0x00001ffe) +#define CPM_BRG_DIV16 ((uint)0x00000001) + +/* SCCs. +*/ +#define SCC_GSMRH_IRP ((uint)0x00040000) +#define SCC_GSMRH_GDE ((uint)0x00010000) +#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) +#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) +#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) +#define SCC_GSMRH_REVD ((uint)0x00002000) +#define SCC_GSMRH_TRX ((uint)0x00001000) +#define SCC_GSMRH_TTX ((uint)0x00000800) +#define SCC_GSMRH_CDP ((uint)0x00000400) +#define SCC_GSMRH_CTSP ((uint)0x00000200) +#define SCC_GSMRH_CDS ((uint)0x00000100) +#define SCC_GSMRH_CTSS ((uint)0x00000080) +#define SCC_GSMRH_TFL ((uint)0x00000040) +#define SCC_GSMRH_RFW ((uint)0x00000020) +#define SCC_GSMRH_TXSY ((uint)0x00000010) +#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) +#define SCC_GSMRH_SYNL8 ((uint)0x00000008) +#define SCC_GSMRH_SYNL4 ((uint)0x00000004) +#define SCC_GSMRH_RTSM ((uint)0x00000002) +#define SCC_GSMRH_RSYN ((uint)0x00000001) + +#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ +#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) +#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) +#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) +#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) +#define SCC_GSMRL_TCI ((uint)0x10000000) +#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) +#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) +#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) +#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) +#define SCC_GSMRL_RINV ((uint)0x02000000) +#define SCC_GSMRL_TINV ((uint)0x01000000) +#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) +#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) +#define SCC_GSMRL_TPL_48 ((uint)0x00800000) +#define SCC_GSMRL_TPL_32 ((uint)0x00600000) +#define SCC_GSMRL_TPL_16 ((uint)0x00400000) +#define SCC_GSMRL_TPL_8 ((uint)0x00200000) +#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) +#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) +#define SCC_GSMRL_TPP_01 ((uint)0x00100000) +#define SCC_GSMRL_TPP_10 ((uint)0x00080000) +#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) +#define SCC_GSMRL_TEND ((uint)0x00040000) +#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) +#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) +#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) +#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) +#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) +#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) +#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) +#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) +#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) +#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) +#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) +#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) +#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) +#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) +#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ +#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) +#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) +#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) +#define SCC_GSMRL_ENR ((uint)0x00000020) +#define SCC_GSMRL_ENT ((uint)0x00000010) +#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) +#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) +#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) +#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) +#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) +#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) +#define SCC_GSMRL_MODE_UART ((uint)0x00000004) +#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) +#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) +#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) + +#define SCC_TODR_TOD ((ushort)0x8000) + +/* SCC Event and Mask register. +*/ +#define SCCM_TXE ((unsigned char)0x10) +#define SCCM_BSY ((unsigned char)0x04) +#define SCCM_TX ((unsigned char)0x02) +#define SCCM_RX ((unsigned char)0x01) + +typedef struct scc_param { + ushort scc_rbase; /* Rx Buffer descriptor base address */ + ushort scc_tbase; /* Tx Buffer descriptor base address */ + u_char scc_rfcr; /* Rx function code */ + u_char scc_tfcr; /* Tx function code */ + ushort scc_mrblr; /* Max receive buffer length */ + uint scc_rstate; /* Internal */ + uint scc_idp; /* Internal */ + ushort scc_rbptr; /* Internal */ + ushort scc_ibc; /* Internal */ + uint scc_rxtmp; /* Internal */ + uint scc_tstate; /* Internal */ + uint scc_tdp; /* Internal */ + ushort scc_tbptr; /* Internal */ + ushort scc_tbc; /* Internal */ + uint scc_txtmp; /* Internal */ + uint scc_rcrc; /* Internal */ + uint scc_tcrc; /* Internal */ +} sccp_t; + +/* CPM Ethernet through SCC1. + */ +typedef struct scc_enet { + sccp_t sen_genscc; + uint sen_cpres; /* Preset CRC */ + uint sen_cmask; /* Constant mask for CRC */ + uint sen_crcec; /* CRC Error counter */ + uint sen_alec; /* alignment error counter */ + uint sen_disfc; /* discard frame counter */ + ushort sen_pads; /* Tx short frame pad character */ + ushort sen_retlim; /* Retry limit threshold */ + ushort sen_retcnt; /* Retry limit counter */ + ushort sen_maxflr; /* maximum frame length register */ + ushort sen_minflr; /* minimum frame length register */ + ushort sen_maxd1; /* maximum DMA1 length */ + ushort sen_maxd2; /* maximum DMA2 length */ + ushort sen_maxd; /* Rx max DMA */ + ushort sen_dmacnt; /* Rx DMA counter */ + ushort sen_maxb; /* Max BD byte count */ + ushort sen_gaddr1; /* Group address filter */ + ushort sen_gaddr2; + ushort sen_gaddr3; + ushort sen_gaddr4; + uint sen_tbuf0data0; /* Save area 0 - current frame */ + uint sen_tbuf0data1; /* Save area 1 - current frame */ + uint sen_tbuf0rba; /* Internal */ + uint sen_tbuf0crc; /* Internal */ + ushort sen_tbuf0bcnt; /* Internal */ + ushort sen_paddrh; /* physical address (MSB) */ + ushort sen_paddrm; + ushort sen_paddrl; /* physical address (LSB) */ + ushort sen_pper; /* persistence */ + ushort sen_rfbdptr; /* Rx first BD pointer */ + ushort sen_tfbdptr; /* Tx first BD pointer */ + ushort sen_tlbdptr; /* Tx last BD pointer */ + uint sen_tbuf1data0; /* Save area 0 - current frame */ + uint sen_tbuf1data1; /* Save area 1 - current frame */ + uint sen_tbuf1rba; /* Internal */ + uint sen_tbuf1crc; /* Internal */ + ushort sen_tbuf1bcnt; /* Internal */ + ushort sen_txlen; /* Tx Frame length counter */ + ushort sen_iaddr1; /* Individual address filter */ + ushort sen_iaddr2; + ushort sen_iaddr3; + ushort sen_iaddr4; + ushort sen_boffcnt; /* Backoff counter */ + + /* NOTE: Some versions of the manual have the following items + * incorrectly documented. Below is the proper order. + */ + ushort sen_taddrh; /* temp address (MSB) */ + ushort sen_taddrm; + ushort sen_taddrl; /* temp address (LSB) */ +} scc_enet_t; + + +/* SCC Event register as used by Ethernet. +*/ +#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ +#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* SCC Mode Register (PSMR) as used by Ethernet. +*/ +#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ +#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ +#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ +#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ +#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ +#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ +#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ +#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ +#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ +#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ +#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ +#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ +#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ + +/* Buffer descriptor control/status used by Ethernet receive. + * Common to SCC and FCC. + */ +#define BD_ENET_RX_EMPTY ((ushort)0x8000) +#define BD_ENET_RX_WRAP ((ushort)0x2000) +#define BD_ENET_RX_INTR ((ushort)0x1000) +#define BD_ENET_RX_LAST ((ushort)0x0800) +#define BD_ENET_RX_FIRST ((ushort)0x0400) +#define BD_ENET_RX_MISS ((ushort)0x0100) +#define BD_ENET_RX_BC ((ushort)0x0080) /* FCC Only */ +#define BD_ENET_RX_MC ((ushort)0x0040) /* FCC Only */ +#define BD_ENET_RX_LG ((ushort)0x0020) +#define BD_ENET_RX_NO ((ushort)0x0010) +#define BD_ENET_RX_SH ((ushort)0x0008) +#define BD_ENET_RX_CR ((ushort)0x0004) +#define BD_ENET_RX_OV ((ushort)0x0002) +#define BD_ENET_RX_CL ((ushort)0x0001) +#define BD_ENET_RX_STATS ((ushort)0x01ff) /* All status bits */ + +/* Buffer descriptor control/status used by Ethernet transmit. + * Common to SCC and FCC. + */ +#define BD_ENET_TX_READY ((ushort)0x8000) +#define BD_ENET_TX_PAD ((ushort)0x4000) +#define BD_ENET_TX_WRAP ((ushort)0x2000) +#define BD_ENET_TX_INTR ((ushort)0x1000) +#define BD_ENET_TX_LAST ((ushort)0x0800) +#define BD_ENET_TX_TC ((ushort)0x0400) +#define BD_ENET_TX_DEF ((ushort)0x0200) +#define BD_ENET_TX_HB ((ushort)0x0100) +#define BD_ENET_TX_LC ((ushort)0x0080) +#define BD_ENET_TX_RL ((ushort)0x0040) +#define BD_ENET_TX_RCMASK ((ushort)0x003c) +#define BD_ENET_TX_UN ((ushort)0x0002) +#define BD_ENET_TX_CSL ((ushort)0x0001) +#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */ + +/* SCC as UART +*/ +typedef struct scc_uart { + sccp_t scc_genscc; + uint scc_res1; /* Reserved */ + uint scc_res2; /* Reserved */ + ushort scc_maxidl; /* Maximum idle chars */ + ushort scc_idlc; /* temp idle counter */ + ushort scc_brkcr; /* Break count register */ + ushort scc_parec; /* receive parity error counter */ + ushort scc_frmec; /* receive framing error counter */ + ushort scc_nosec; /* receive noise counter */ + ushort scc_brkec; /* receive break condition counter */ + ushort scc_brkln; /* last received break length */ + ushort scc_uaddr1; /* UART address character 1 */ + ushort scc_uaddr2; /* UART address character 2 */ + ushort scc_rtemp; /* Temp storage */ + ushort scc_toseq; /* Transmit out of sequence char */ + ushort scc_char1; /* control character 1 */ + ushort scc_char2; /* control character 2 */ + ushort scc_char3; /* control character 3 */ + ushort scc_char4; /* control character 4 */ + ushort scc_char5; /* control character 5 */ + ushort scc_char6; /* control character 6 */ + ushort scc_char7; /* control character 7 */ + ushort scc_char8; /* control character 8 */ + ushort scc_rccm; /* receive control character mask */ + ushort scc_rccr; /* receive control character register */ + ushort scc_rlbc; /* receive last break character */ +} scc_uart_t; + +/* SCC Event and Mask registers when it is used as a UART. +*/ +#define UART_SCCM_GLR ((ushort)0x1000) +#define UART_SCCM_GLT ((ushort)0x0800) +#define UART_SCCM_AB ((ushort)0x0200) +#define UART_SCCM_IDL ((ushort)0x0100) +#define UART_SCCM_GRA ((ushort)0x0080) +#define UART_SCCM_BRKE ((ushort)0x0040) +#define UART_SCCM_BRKS ((ushort)0x0020) +#define UART_SCCM_CCR ((ushort)0x0008) +#define UART_SCCM_BSY ((ushort)0x0004) +#define UART_SCCM_TX ((ushort)0x0002) +#define UART_SCCM_RX ((ushort)0x0001) + +/* The SCC PSMR when used as a UART. +*/ +#define SCU_PSMR_FLC ((ushort)0x8000) +#define SCU_PSMR_SL ((ushort)0x4000) +#define SCU_PSMR_CL ((ushort)0x3000) +#define SCU_PSMR_UM ((ushort)0x0c00) +#define SCU_PSMR_FRZ ((ushort)0x0200) +#define SCU_PSMR_RZS ((ushort)0x0100) +#define SCU_PSMR_SYN ((ushort)0x0080) +#define SCU_PSMR_DRT ((ushort)0x0040) +#define SCU_PSMR_PEN ((ushort)0x0010) +#define SCU_PSMR_RPM ((ushort)0x000c) +#define SCU_PSMR_REVP ((ushort)0x0008) +#define SCU_PSMR_TPM ((ushort)0x0003) +#define SCU_PSMR_TEVP ((ushort)0x0002) + +/* CPM Transparent mode SCC. + */ +typedef struct scc_trans { + sccp_t st_genscc; + uint st_cpres; /* Preset CRC */ + uint st_cmask; /* Constant mask for CRC */ +} scc_trans_t; + +#define BD_SCC_TX_LAST ((ushort)0x0800) + +/* How about some FCCs..... +*/ +#define FCC_GFMR_DIAG_NORM ((uint)0x00000000) +#define FCC_GFMR_DIAG_LE ((uint)0x40000000) +#define FCC_GFMR_DIAG_AE ((uint)0x80000000) +#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000) +#define FCC_GFMR_TCI ((uint)0x20000000) +#define FCC_GFMR_TRX ((uint)0x10000000) +#define FCC_GFMR_TTX ((uint)0x08000000) +#define FCC_GFMR_TTX ((uint)0x08000000) +#define FCC_GFMR_CDP ((uint)0x04000000) +#define FCC_GFMR_CTSP ((uint)0x02000000) +#define FCC_GFMR_CDS ((uint)0x01000000) +#define FCC_GFMR_CTSS ((uint)0x00800000) +#define FCC_GFMR_SYNL_NONE ((uint)0x00000000) +#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000) +#define FCC_GFMR_SYNL_8 ((uint)0x00008000) +#define FCC_GFMR_SYNL_16 ((uint)0x0000c000) +#define FCC_GFMR_RTSM ((uint)0x00002000) +#define FCC_GFMR_RENC_NRZ ((uint)0x00000000) +#define FCC_GFMR_RENC_NRZI ((uint)0x00000800) +#define FCC_GFMR_REVD ((uint)0x00000400) +#define FCC_GFMR_TENC_NRZ ((uint)0x00000000) +#define FCC_GFMR_TENC_NRZI ((uint)0x00000100) +#define FCC_GFMR_TCRC_16 ((uint)0x00000000) +#define FCC_GFMR_TCRC_32 ((uint)0x00000080) +#define FCC_GFMR_ENR ((uint)0x00000020) +#define FCC_GFMR_ENT ((uint)0x00000010) +#define FCC_GFMR_MODE_ENET ((uint)0x0000000c) +#define FCC_GFMR_MODE_ATM ((uint)0x0000000a) +#define FCC_GFMR_MODE_HDLC ((uint)0x00000000) + +/* Generic FCC parameter ram. +*/ +typedef struct fcc_param { + ushort fcc_riptr; /* Rx Internal temp pointer */ + ushort fcc_tiptr; /* Tx Internal temp pointer */ + ushort fcc_res1; + ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */ + uint fcc_rstate; /* Upper byte is Func code, must be set */ + uint fcc_rbase; /* Receive BD base */ + ushort fcc_rbdstat; /* RxBD status */ + ushort fcc_rbdlen; /* RxBD down counter */ + uint fcc_rdptr; /* RxBD internal data pointer */ + uint fcc_tstate; /* Upper byte is Func code, must be set */ + uint fcc_tbase; /* Transmit BD base */ + ushort fcc_tbdstat; /* TxBD status */ + ushort fcc_tbdlen; /* TxBD down counter */ + uint fcc_tdptr; /* TxBD internal data pointer */ + uint fcc_rbptr; /* Rx BD Internal buf pointer */ + uint fcc_tbptr; /* Tx BD Internal buf pointer */ + uint fcc_rcrc; /* Rx temp CRC */ + uint fcc_res2; + uint fcc_tcrc; /* Tx temp CRC */ +} fccp_t; + + +/* Ethernet controller through FCC. +*/ +typedef struct fcc_enet { + fccp_t fen_genfcc; + uint fen_statbuf; /* Internal status buffer */ + uint fen_camptr; /* CAM address */ + uint fen_cmask; /* Constant mask for CRC */ + uint fen_cpres; /* Preset CRC */ + uint fen_crcec; /* CRC Error counter */ + uint fen_alec; /* alignment error counter */ + uint fen_disfc; /* discard frame counter */ + ushort fen_retlim; /* Retry limit */ + ushort fen_retcnt; /* Retry counter */ + ushort fen_pper; /* Persistence */ + ushort fen_boffcnt; /* backoff counter */ + uint fen_gaddrh; /* Group address filter, high 32-bits */ + uint fen_gaddrl; /* Group address filter, low 32-bits */ + ushort fen_tfcstat; /* out of sequence TxBD */ + ushort fen_tfclen; + uint fen_tfcptr; + ushort fen_mflr; /* Maximum frame length (1518) */ + ushort fen_paddrh; /* MAC address */ + ushort fen_paddrm; + ushort fen_paddrl; + ushort fen_ibdcount; /* Internal BD counter */ + ushort fen_ibdstart; /* Internal BD start pointer */ + ushort fen_ibdend; /* Internal BD end pointer */ + ushort fen_txlen; /* Internal Tx frame length counter */ + uint fen_ibdbase[8]; /* Internal use */ + uint fen_iaddrh; /* Individual address filter */ + uint fen_iaddrl; + ushort fen_minflr; /* Minimum frame length (64) */ + ushort fen_taddrh; /* Filter transfer MAC address */ + ushort fen_taddrm; + ushort fen_taddrl; + ushort fen_padptr; /* Pointer to pad byte buffer */ + ushort fen_cftype; /* control frame type */ + ushort fen_cfrange; /* control frame range */ + ushort fen_maxb; /* maximum BD count */ + ushort fen_maxd1; /* Max DMA1 length (1520) */ + ushort fen_maxd2; /* Max DMA2 length (1520) */ + ushort fen_maxd; /* internal max DMA count */ + ushort fen_dmacnt; /* internal DMA counter */ + uint fen_octc; /* Total octect counter */ + uint fen_colc; /* Total collision counter */ + uint fen_broc; /* Total broadcast packet counter */ + uint fen_mulc; /* Total multicast packet count */ + uint fen_uspc; /* Total packets < 64 bytes */ + uint fen_frgc; /* Total packets < 64 bytes with errors */ + uint fen_ospc; /* Total packets > 1518 */ + uint fen_jbrc; /* Total packets > 1518 with errors */ + uint fen_p64c; /* Total packets == 64 bytes */ + uint fen_p65c; /* Total packets 64 < bytes <= 127 */ + uint fen_p128c; /* Total packets 127 < bytes <= 255 */ + uint fen_p256c; /* Total packets 256 < bytes <= 511 */ + uint fen_p512c; /* Total packets 512 < bytes <= 1023 */ + uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */ + uint fen_cambuf; /* Internal CAM buffer poiner */ + ushort fen_rfthr; /* Received frames threshold */ + ushort fen_rfcnt; /* Received frames count */ +} fcc_enet_t; + +/* FCC Event/Mask register as used by Ethernet. +*/ +#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */ +#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */ +#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */ +#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* FCC Mode Register (FPSMR) as used by Ethernet. +*/ +#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */ +#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */ +#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */ +#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */ +#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */ +#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */ +#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */ +#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */ +#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */ +#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */ +#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */ +#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */ +#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */ + +/* IIC parameter RAM. +*/ +typedef struct iic { + ushort iic_rbase; /* Rx Buffer descriptor base address */ + ushort iic_tbase; /* Tx Buffer descriptor base address */ + u_char iic_rfcr; /* Rx function code */ + u_char iic_tfcr; /* Tx function code */ + ushort iic_mrblr; /* Max receive buffer length */ + uint iic_rstate; /* Internal */ + uint iic_rdp; /* Internal */ + ushort iic_rbptr; /* Internal */ + ushort iic_rbc; /* Internal */ + uint iic_rxtmp; /* Internal */ + uint iic_tstate; /* Internal */ + uint iic_tdp; /* Internal */ + ushort iic_tbptr; /* Internal */ + ushort iic_tbc; /* Internal */ + uint iic_txtmp; /* Internal */ +} iic_t; + +/* SPI parameter RAM. +*/ +typedef struct spi { + ushort spi_rbase; /* Rx Buffer descriptor base address */ + ushort spi_tbase; /* Tx Buffer descriptor base address */ + u_char spi_rfcr; /* Rx function code */ + u_char spi_tfcr; /* Tx function code */ + ushort spi_mrblr; /* Max receive buffer length */ + uint spi_rstate; /* Internal */ + uint spi_rdp; /* Internal */ + ushort spi_rbptr; /* Internal */ + ushort spi_rbc; /* Internal */ + uint spi_rxtmp; /* Internal */ + uint spi_tstate; /* Internal */ + uint spi_tdp; /* Internal */ + ushort spi_tbptr; /* Internal */ + ushort spi_tbc; /* Internal */ + uint spi_txtmp; /* Internal */ + uint spi_res; /* Tx temp. */ + uint spi_res1[4]; /* SDMA temp. */ +} spi_t; + +/* SPI Mode register. +*/ +#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ +#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ +#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ +#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ +#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ +#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ +#define SPMODE_EN ((ushort)0x0100) /* Enable */ +#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ +#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ + +#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4) +#define SPMODE_PM(x) ((x) &0xF) + +#define SPI_EB ((u_char)0x10) /* big endian byte order */ + +#define BD_IIC_START ((ushort)0x0400) + +/* IDMA parameter RAM +*/ +typedef struct idma { + ushort ibase; /* IDMA buffer descriptor table base address */ + ushort dcm; /* DMA channel mode */ + ushort ibdptr; /* IDMA current buffer descriptor pointer */ + ushort dpr_buf; /* IDMA transfer buffer base address */ + ushort buf_inv; /* internal buffer inventory */ + ushort ss_max; /* steady-state maximum transfer size */ + ushort dpr_in_ptr; /* write pointer inside the internal buffer */ + ushort sts; /* source transfer size */ + ushort dpr_out_ptr; /* read pointer inside the internal buffer */ + ushort seob; /* source end of burst */ + ushort deob; /* destination end of burst */ + ushort dts; /* destination transfer size */ + ushort ret_add; /* return address when working in ERM=1 mode */ + ushort res0; /* reserved */ + uint bd_cnt; /* internal byte count */ + uint s_ptr; /* source internal data pointer */ + uint d_ptr; /* destination internal data pointer */ + uint istate; /* internal state */ + u_char res1[20]; /* pad to 64-byte length */ +} idma_t; + +/* DMA channel mode bit fields +*/ +#define IDMA_DCM_FB ((ushort)0x8000) /* fly-by mode */ +#define IDMA_DCM_LP ((ushort)0x4000) /* low priority */ +#define IDMA_DCM_TC2 ((ushort)0x0400) /* value driven on TC[2] */ +#define IDMA_DCM_DMA_WRAP_MASK ((ushort)0x01c0) /* mask for DMA wrap */ +#define IDMA_DCM_DMA_WRAP_64 ((ushort)0x0000) /* 64-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_128 ((ushort)0x0040) /* 128-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_256 ((ushort)0x0080) /* 256-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_512 ((ushort)0x00c0) /* 512-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_1024 ((ushort)0x0100) /* 1024-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_2048 ((ushort)0x0140) /* 2048-byte DMA xfer buffer */ +#define IDMA_DCM_SINC ((ushort)0x0020) /* source inc addr */ +#define IDMA_DCM_DINC ((ushort)0x0010) /* destination inc addr */ +#define IDMA_DCM_ERM ((ushort)0x0008) /* external request mode */ +#define IDMA_DCM_DT ((ushort)0x0004) /* DONE treatment */ +#define IDMA_DCM_SD_MASK ((ushort)0x0003) /* mask for SD bit field */ +#define IDMA_DCM_SD_MEM2MEM ((ushort)0x0000) /* memory-to-memory xfer */ +#define IDMA_DCM_SD_PER2MEM ((ushort)0x0002) /* peripheral-to-memory xfer */ +#define IDMA_DCM_SD_MEM2PER ((ushort)0x0001) /* memory-to-peripheral xfer */ + +/* IDMA Buffer Descriptors +*/ +typedef struct idma_bd { + uint flags; + uint len; /* data length */ + uint src; /* source data buffer pointer */ + uint dst; /* destination data buffer pointer */ +} idma_bd_t; + +/* IDMA buffer descriptor flag bit fields +*/ +#define IDMA_BD_V ((uint)0x80000000) /* valid */ +#define IDMA_BD_W ((uint)0x20000000) /* wrap */ +#define IDMA_BD_I ((uint)0x10000000) /* interrupt */ +#define IDMA_BD_L ((uint)0x08000000) /* last */ +#define IDMA_BD_CM ((uint)0x02000000) /* continuous mode */ +#define IDMA_BD_SDN ((uint)0x00400000) /* source done */ +#define IDMA_BD_DDN ((uint)0x00200000) /* destination done */ +#define IDMA_BD_DGBL ((uint)0x00100000) /* destination global */ +#define IDMA_BD_DBO_LE ((uint)0x00040000) /* little-end dest byte order */ +#define IDMA_BD_DBO_BE ((uint)0x00080000) /* big-end dest byte order */ +#define IDMA_BD_DDTB ((uint)0x00010000) /* destination data bus */ +#define IDMA_BD_SGBL ((uint)0x00002000) /* source global */ +#define IDMA_BD_SBO_LE ((uint)0x00000800) /* little-end src byte order */ +#define IDMA_BD_SBO_BE ((uint)0x00001000) /* big-end src byte order */ +#define IDMA_BD_SDTB ((uint)0x00000200) /* source data bus */ + +/* per-channel IDMA registers +*/ +typedef struct im_idma { + u_char idsr; /* IDMAn event status register */ + u_char res0[3]; + u_char idmr; /* IDMAn event mask register */ + u_char res1[3]; +} im_idma_t; + +/* IDMA event register bit fields +*/ +#define IDMA_EVENT_SC ((unsigned char)0x08) /* stop completed */ +#define IDMA_EVENT_OB ((unsigned char)0x04) /* out of buffers */ +#define IDMA_EVENT_EDN ((unsigned char)0x02) /* external DONE asserted */ +#define IDMA_EVENT_BC ((unsigned char)0x01) /* buffer descriptor complete */ + +/* RISC Controller Configuration Register (RCCR) bit fields +*/ +#define RCCR_TIME ((uint)0x80000000) /* timer enable */ +#define RCCR_TIMEP_MASK ((uint)0x3f000000) /* mask for timer period bit field */ +#define RCCR_DR0M ((uint)0x00800000) /* IDMA0 request mode */ +#define RCCR_DR1M ((uint)0x00400000) /* IDMA1 request mode */ +#define RCCR_DR2M ((uint)0x00000080) /* IDMA2 request mode */ +#define RCCR_DR3M ((uint)0x00000040) /* IDMA3 request mode */ +#define RCCR_DR0QP_MASK ((uint)0x00300000) /* mask for IDMA0 req priority */ +#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */ +#define RCCR_DR0QP_MED ((uint)0x00100000) /* IDMA0 has medium req priority */ +#define RCCR_DR0QP_LOW ((uint)0x00200000) /* IDMA0 has low req priority */ +#define RCCR_DR1QP_MASK ((uint)0x00030000) /* mask for IDMA1 req priority */ +#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */ +#define RCCR_DR1QP_MED ((uint)0x00010000) /* IDMA1 has medium req priority */ +#define RCCR_DR1QP_LOW ((uint)0x00020000) /* IDMA1 has low req priority */ +#define RCCR_DR2QP_MASK ((uint)0x00000030) /* mask for IDMA2 req priority */ +#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */ +#define RCCR_DR2QP_MED ((uint)0x00000010) /* IDMA2 has medium req priority */ +#define RCCR_DR2QP_LOW ((uint)0x00000020) /* IDMA2 has low req priority */ +#define RCCR_DR3QP_MASK ((uint)0x00000003) /* mask for IDMA3 req priority */ +#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */ +#define RCCR_DR3QP_MED ((uint)0x00000001) /* IDMA3 has medium req priority */ +#define RCCR_DR3QP_LOW ((uint)0x00000002) /* IDMA3 has low req priority */ +#define RCCR_EIE ((uint)0x00080000) /* external interrupt enable */ +#define RCCR_SCD ((uint)0x00040000) /* scheduler configuration */ +#define RCCR_ERAM_MASK ((uint)0x0000e000) /* mask for enable RAM microcode */ +#define RCCR_ERAM_0KB ((uint)0x00000000) /* use 0KB of dpram for microcode */ +#define RCCR_ERAM_2KB ((uint)0x00002000) /* use 2KB of dpram for microcode */ +#define RCCR_ERAM_4KB ((uint)0x00004000) /* use 4KB of dpram for microcode */ +#define RCCR_ERAM_6KB ((uint)0x00006000) /* use 6KB of dpram for microcode */ +#define RCCR_ERAM_8KB ((uint)0x00008000) /* use 8KB of dpram for microcode */ +#define RCCR_ERAM_10KB ((uint)0x0000a000) /* use 10KB of dpram for microcode */ +#define RCCR_ERAM_12KB ((uint)0x0000c000) /* use 12KB of dpram for microcode */ +#define RCCR_EDM0 ((uint)0x00000800) /* DREQ0 edge detect mode */ +#define RCCR_EDM1 ((uint)0x00000400) /* DREQ1 edge detect mode */ +#define RCCR_EDM2 ((uint)0x00000200) /* DREQ2 edge detect mode */ +#define RCCR_EDM3 ((uint)0x00000100) /* DREQ3 edge detect mode */ +#define RCCR_DEM01 ((uint)0x00000008) /* DONE0/DONE1 edge detect mode */ +#define RCCR_DEM23 ((uint)0x00000004) /* DONE2/DONE3 edge detect mode */ + +/*----------------------------------------------------------------------- + * CMXFCR - CMX FCC Clock Route Register + */ +#define CMXFCR_FC1 0x40000000 /* FCC1 connection */ +#define CMXFCR_RF1CS_MSK 0x38000000 /* Receive FCC1 Clock Source Mask */ +#define CMXFCR_TF1CS_MSK 0x07000000 /* Transmit FCC1 Clock Source Mask */ +#define CMXFCR_FC2 0x00400000 /* FCC2 connection */ +#define CMXFCR_RF2CS_MSK 0x00380000 /* Receive FCC2 Clock Source Mask */ +#define CMXFCR_TF2CS_MSK 0x00070000 /* Transmit FCC2 Clock Source Mask */ +#define CMXFCR_FC3 0x00004000 /* FCC3 connection */ +#define CMXFCR_RF3CS_MSK 0x00003800 /* Receive FCC3 Clock Source Mask */ +#define CMXFCR_TF3CS_MSK 0x00000700 /* Transmit FCC3 Clock Source Mask */ + +#define CMXFCR_RF1CS_BRG5 0x00000000 /* Receive FCC1 Clock Source is BRG5 */ +#define CMXFCR_RF1CS_BRG6 0x08000000 /* Receive FCC1 Clock Source is BRG6 */ +#define CMXFCR_RF1CS_BRG7 0x10000000 /* Receive FCC1 Clock Source is BRG7 */ +#define CMXFCR_RF1CS_BRG8 0x18000000 /* Receive FCC1 Clock Source is BRG8 */ +#define CMXFCR_RF1CS_CLK9 0x20000000 /* Receive FCC1 Clock Source is CLK9 */ +#define CMXFCR_RF1CS_CLK10 0x28000000 /* Receive FCC1 Clock Source is CLK10 */ +#define CMXFCR_RF1CS_CLK11 0x30000000 /* Receive FCC1 Clock Source is CLK11 */ +#define CMXFCR_RF1CS_CLK12 0x38000000 /* Receive FCC1 Clock Source is CLK12 */ + +#define CMXFCR_TF1CS_BRG5 0x00000000 /* Transmit FCC1 Clock Source is BRG5 */ +#define CMXFCR_TF1CS_BRG6 0x01000000 /* Transmit FCC1 Clock Source is BRG6 */ +#define CMXFCR_TF1CS_BRG7 0x02000000 /* Transmit FCC1 Clock Source is BRG7 */ +#define CMXFCR_TF1CS_BRG8 0x03000000 /* Transmit FCC1 Clock Source is BRG8 */ +#define CMXFCR_TF1CS_CLK9 0x04000000 /* Transmit FCC1 Clock Source is CLK9 */ +#define CMXFCR_TF1CS_CLK10 0x05000000 /* Transmit FCC1 Clock Source is CLK10 */ +#define CMXFCR_TF1CS_CLK11 0x06000000 /* Transmit FCC1 Clock Source is CLK11 */ +#define CMXFCR_TF1CS_CLK12 0x07000000 /* Transmit FCC1 Clock Source is CLK12 */ + +#define CMXFCR_RF2CS_BRG5 0x00000000 /* Receive FCC2 Clock Source is BRG5 */ +#define CMXFCR_RF2CS_BRG6 0x00080000 /* Receive FCC2 Clock Source is BRG6 */ +#define CMXFCR_RF2CS_BRG7 0x00100000 /* Receive FCC2 Clock Source is BRG7 */ +#define CMXFCR_RF2CS_BRG8 0x00180000 /* Receive FCC2 Clock Source is BRG8 */ +#define CMXFCR_RF2CS_CLK13 0x00200000 /* Receive FCC2 Clock Source is CLK13 */ +#define CMXFCR_RF2CS_CLK14 0x00280000 /* Receive FCC2 Clock Source is CLK14 */ +#define CMXFCR_RF2CS_CLK15 0x00300000 /* Receive FCC2 Clock Source is CLK15 */ +#define CMXFCR_RF2CS_CLK16 0x00380000 /* Receive FCC2 Clock Source is CLK16 */ + +#define CMXFCR_TF2CS_BRG5 0x00000000 /* Transmit FCC2 Clock Source is BRG5 */ +#define CMXFCR_TF2CS_BRG6 0x00010000 /* Transmit FCC2 Clock Source is BRG6 */ +#define CMXFCR_TF2CS_BRG7 0x00020000 /* Transmit FCC2 Clock Source is BRG7 */ +#define CMXFCR_TF2CS_BRG8 0x00030000 /* Transmit FCC2 Clock Source is BRG8 */ +#define CMXFCR_TF2CS_CLK13 0x00040000 /* Transmit FCC2 Clock Source is CLK13 */ +#define CMXFCR_TF2CS_CLK14 0x00050000 /* Transmit FCC2 Clock Source is CLK14 */ +#define CMXFCR_TF2CS_CLK15 0x00060000 /* Transmit FCC2 Clock Source is CLK15 */ +#define CMXFCR_TF2CS_CLK16 0x00070000 /* Transmit FCC2 Clock Source is CLK16 */ + +#define CMXFCR_RF3CS_BRG5 0x00000000 /* Receive FCC3 Clock Source is BRG5 */ +#define CMXFCR_RF3CS_BRG6 0x00000800 /* Receive FCC3 Clock Source is BRG6 */ +#define CMXFCR_RF3CS_BRG7 0x00001000 /* Receive FCC3 Clock Source is BRG7 */ +#define CMXFCR_RF3CS_BRG8 0x00001800 /* Receive FCC3 Clock Source is BRG8 */ +#define CMXFCR_RF3CS_CLK13 0x00002000 /* Receive FCC3 Clock Source is CLK13 */ +#define CMXFCR_RF3CS_CLK14 0x00002800 /* Receive FCC3 Clock Source is CLK14 */ +#define CMXFCR_RF3CS_CLK15 0x00003000 /* Receive FCC3 Clock Source is CLK15 */ +#define CMXFCR_RF3CS_CLK16 0x00003800 /* Receive FCC3 Clock Source is CLK16 */ + +#define CMXFCR_TF3CS_BRG5 0x00000000 /* Transmit FCC3 Clock Source is BRG5 */ +#define CMXFCR_TF3CS_BRG6 0x00000100 /* Transmit FCC3 Clock Source is BRG6 */ +#define CMXFCR_TF3CS_BRG7 0x00000200 /* Transmit FCC3 Clock Source is BRG7 */ +#define CMXFCR_TF3CS_BRG8 0x00000300 /* Transmit FCC3 Clock Source is BRG8 */ +#define CMXFCR_TF3CS_CLK13 0x00000400 /* Transmit FCC3 Clock Source is CLK13 */ +#define CMXFCR_TF3CS_CLK14 0x00000500 /* Transmit FCC3 Clock Source is CLK14 */ +#define CMXFCR_TF3CS_CLK15 0x00000600 /* Transmit FCC3 Clock Source is CLK15 */ +#define CMXFCR_TF3CS_CLK16 0x00000700 /* Transmit FCC3 Clock Source is CLK16 */ + +/*----------------------------------------------------------------------- + * CMXSCR - CMX SCC Clock Route Register + */ +#define CMXSCR_GR1 0x80000000 /* Grant Support of SCC1 */ +#define CMXSCR_SC1 0x40000000 /* SCC1 connection */ +#define CMXSCR_RS1CS_MSK 0x38000000 /* Receive SCC1 Clock Source Mask */ +#define CMXSCR_TS1CS_MSK 0x07000000 /* Transmit SCC1 Clock Source Mask */ +#define CMXSCR_GR2 0x00800000 /* Grant Support of SCC2 */ +#define CMXSCR_SC2 0x00400000 /* SCC2 connection */ +#define CMXSCR_RS2CS_MSK 0x00380000 /* Receive SCC2 Clock Source Mask */ +#define CMXSCR_TS2CS_MSK 0x00070000 /* Transmit SCC2 Clock Source Mask */ +#define CMXSCR_GR3 0x00008000 /* Grant Support of SCC3 */ +#define CMXSCR_SC3 0x00004000 /* SCC3 connection */ +#define CMXSCR_RS3CS_MSK 0x00003800 /* Receive SCC3 Clock Source Mask */ +#define CMXSCR_TS3CS_MSK 0x00000700 /* Transmit SCC3 Clock Source Mask */ +#define CMXSCR_GR4 0x00000080 /* Grant Support of SCC4 */ +#define CMXSCR_SC4 0x00000040 /* SCC4 connection */ +#define CMXSCR_RS4CS_MSK 0x00000038 /* Receive SCC4 Clock Source Mask */ +#define CMXSCR_TS4CS_MSK 0x00000007 /* Transmit SCC4 Clock Source Mask */ + +#define CMXSCR_RS1CS_BRG1 0x00000000 /* SCC1 Rx Clock Source is BRG1 */ +#define CMXSCR_RS1CS_BRG2 0x08000000 /* SCC1 Rx Clock Source is BRG2 */ +#define CMXSCR_RS1CS_BRG3 0x10000000 /* SCC1 Rx Clock Source is BRG3 */ +#define CMXSCR_RS1CS_BRG4 0x18000000 /* SCC1 Rx Clock Source is BRG4 */ +#define CMXSCR_RS1CS_CLK11 0x20000000 /* SCC1 Rx Clock Source is CLK11 */ +#define CMXSCR_RS1CS_CLK12 0x28000000 /* SCC1 Rx Clock Source is CLK12 */ +#define CMXSCR_RS1CS_CLK3 0x30000000 /* SCC1 Rx Clock Source is CLK3 */ +#define CMXSCR_RS1CS_CLK4 0x38000000 /* SCC1 Rx Clock Source is CLK4 */ + +#define CMXSCR_TS1CS_BRG1 0x00000000 /* SCC1 Tx Clock Source is BRG1 */ +#define CMXSCR_TS1CS_BRG2 0x01000000 /* SCC1 Tx Clock Source is BRG2 */ +#define CMXSCR_TS1CS_BRG3 0x02000000 /* SCC1 Tx Clock Source is BRG3 */ +#define CMXSCR_TS1CS_BRG4 0x03000000 /* SCC1 Tx Clock Source is BRG4 */ +#define CMXSCR_TS1CS_CLK11 0x04000000 /* SCC1 Tx Clock Source is CLK11 */ +#define CMXSCR_TS1CS_CLK12 0x05000000 /* SCC1 Tx Clock Source is CLK12 */ +#define CMXSCR_TS1CS_CLK3 0x06000000 /* SCC1 Tx Clock Source is CLK3 */ +#define CMXSCR_TS1CS_CLK4 0x07000000 /* SCC1 Tx Clock Source is CLK4 */ + +#define CMXSCR_RS2CS_BRG1 0x00000000 /* SCC2 Rx Clock Source is BRG1 */ +#define CMXSCR_RS2CS_BRG2 0x00080000 /* SCC2 Rx Clock Source is BRG2 */ +#define CMXSCR_RS2CS_BRG3 0x00100000 /* SCC2 Rx Clock Source is BRG3 */ +#define CMXSCR_RS2CS_BRG4 0x00180000 /* SCC2 Rx Clock Source is BRG4 */ +#define CMXSCR_RS2CS_CLK11 0x00200000 /* SCC2 Rx Clock Source is CLK11 */ +#define CMXSCR_RS2CS_CLK12 0x00280000 /* SCC2 Rx Clock Source is CLK12 */ +#define CMXSCR_RS2CS_CLK3 0x00300000 /* SCC2 Rx Clock Source is CLK3 */ +#define CMXSCR_RS2CS_CLK4 0x00380000 /* SCC2 Rx Clock Source is CLK4 */ + +#define CMXSCR_TS2CS_BRG1 0x00000000 /* SCC2 Tx Clock Source is BRG1 */ +#define CMXSCR_TS2CS_BRG2 0x00010000 /* SCC2 Tx Clock Source is BRG2 */ +#define CMXSCR_TS2CS_BRG3 0x00020000 /* SCC2 Tx Clock Source is BRG3 */ +#define CMXSCR_TS2CS_BRG4 0x00030000 /* SCC2 Tx Clock Source is BRG4 */ +#define CMXSCR_TS2CS_CLK11 0x00040000 /* SCC2 Tx Clock Source is CLK11 */ +#define CMXSCR_TS2CS_CLK12 0x00050000 /* SCC2 Tx Clock Source is CLK12 */ +#define CMXSCR_TS2CS_CLK3 0x00060000 /* SCC2 Tx Clock Source is CLK3 */ +#define CMXSCR_TS2CS_CLK4 0x00070000 /* SCC2 Tx Clock Source is CLK4 */ + +#define CMXSCR_RS3CS_BRG1 0x00000000 /* SCC3 Rx Clock Source is BRG1 */ +#define CMXSCR_RS3CS_BRG2 0x00000800 /* SCC3 Rx Clock Source is BRG2 */ +#define CMXSCR_RS3CS_BRG3 0x00001000 /* SCC3 Rx Clock Source is BRG3 */ +#define CMXSCR_RS3CS_BRG4 0x00001800 /* SCC3 Rx Clock Source is BRG4 */ +#define CMXSCR_RS3CS_CLK5 0x00002000 /* SCC3 Rx Clock Source is CLK5 */ +#define CMXSCR_RS3CS_CLK6 0x00002800 /* SCC3 Rx Clock Source is CLK6 */ +#define CMXSCR_RS3CS_CLK7 0x00003000 /* SCC3 Rx Clock Source is CLK7 */ +#define CMXSCR_RS3CS_CLK8 0x00003800 /* SCC3 Rx Clock Source is CLK8 */ + +#define CMXSCR_TS3CS_BRG1 0x00000000 /* SCC3 Tx Clock Source is BRG1 */ +#define CMXSCR_TS3CS_BRG2 0x00000100 /* SCC3 Tx Clock Source is BRG2 */ +#define CMXSCR_TS3CS_BRG3 0x00000200 /* SCC3 Tx Clock Source is BRG3 */ +#define CMXSCR_TS3CS_BRG4 0x00000300 /* SCC3 Tx Clock Source is BRG4 */ +#define CMXSCR_TS3CS_CLK5 0x00000400 /* SCC3 Tx Clock Source is CLK5 */ +#define CMXSCR_TS3CS_CLK6 0x00000500 /* SCC3 Tx Clock Source is CLK6 */ +#define CMXSCR_TS3CS_CLK7 0x00000600 /* SCC3 Tx Clock Source is CLK7 */ +#define CMXSCR_TS3CS_CLK8 0x00000700 /* SCC3 Tx Clock Source is CLK8 */ + +#define CMXSCR_RS4CS_BRG1 0x00000000 /* SCC4 Rx Clock Source is BRG1 */ +#define CMXSCR_RS4CS_BRG2 0x00000008 /* SCC4 Rx Clock Source is BRG2 */ +#define CMXSCR_RS4CS_BRG3 0x00000010 /* SCC4 Rx Clock Source is BRG3 */ +#define CMXSCR_RS4CS_BRG4 0x00000018 /* SCC4 Rx Clock Source is BRG4 */ +#define CMXSCR_RS4CS_CLK5 0x00000020 /* SCC4 Rx Clock Source is CLK5 */ +#define CMXSCR_RS4CS_CLK6 0x00000028 /* SCC4 Rx Clock Source is CLK6 */ +#define CMXSCR_RS4CS_CLK7 0x00000030 /* SCC4 Rx Clock Source is CLK7 */ +#define CMXSCR_RS4CS_CLK8 0x00000038 /* SCC4 Rx Clock Source is CLK8 */ + +#define CMXSCR_TS4CS_BRG1 0x00000000 /* SCC4 Tx Clock Source is BRG1 */ +#define CMXSCR_TS4CS_BRG2 0x00000001 /* SCC4 Tx Clock Source is BRG2 */ +#define CMXSCR_TS4CS_BRG3 0x00000002 /* SCC4 Tx Clock Source is BRG3 */ +#define CMXSCR_TS4CS_BRG4 0x00000003 /* SCC4 Tx Clock Source is BRG4 */ +#define CMXSCR_TS4CS_CLK5 0x00000004 /* SCC4 Tx Clock Source is CLK5 */ +#define CMXSCR_TS4CS_CLK6 0x00000005 /* SCC4 Tx Clock Source is CLK6 */ +#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */ +#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */ + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration Register 4-31 + */ +#define SIUMCR_BBD 0x80000000 /* Bus Busy Disable */ +#define SIUMCR_ESE 0x40000000 /* External Snoop Enable */ +#define SIUMCR_PBSE 0x20000000 /* Parity Byte Select Enable */ +#define SIUMCR_CDIS 0x10000000 /* Core Disable */ +#define SIUMCR_DPPC00 0x00000000 /* Data Parity Pins Configuration*/ +#define SIUMCR_DPPC01 0x04000000 /* - " - */ +#define SIUMCR_DPPC10 0x08000000 /* - " - */ +#define SIUMCR_DPPC11 0x0c000000 /* - " - */ +#define SIUMCR_L2CPC00 0x00000000 /* L2 Cache Pins Configuration */ +#define SIUMCR_L2CPC01 0x01000000 /* - " - */ +#define SIUMCR_L2CPC10 0x02000000 /* - " - */ +#define SIUMCR_L2CPC11 0x03000000 /* - " - */ +#define SIUMCR_LBPC00 0x00000000 /* Local Bus Pins Configuration */ +#define SIUMCR_LBPC01 0x00400000 /* - " - */ +#define SIUMCR_LBPC10 0x00800000 /* - " - */ +#define SIUMCR_LBPC11 0x00c00000 /* - " - */ +#define SIUMCR_APPC00 0x00000000 /* Address Parity Pins Configuration*/ +#define SIUMCR_APPC01 0x00100000 /* - " - */ +#define SIUMCR_APPC10 0x00200000 /* - " - */ +#define SIUMCR_APPC11 0x00300000 /* - " - */ +#define SIUMCR_CS10PC00 0x00000000 /* CS10 Pin Configuration */ +#define SIUMCR_CS10PC01 0x00040000 /* - " - */ +#define SIUMCR_CS10PC10 0x00080000 /* - " - */ +#define SIUMCR_CS10PC11 0x000c0000 /* - " - */ +#define SIUMCR_BCTLC00 0x00000000 /* Buffer Control Configuration */ +#define SIUMCR_BCTLC01 0x00010000 /* - " - */ +#define SIUMCR_BCTLC10 0x00020000 /* - " - */ +#define SIUMCR_BCTLC11 0x00030000 /* - " - */ +#define SIUMCR_MMR00 0x00000000 /* Mask Masters Requests */ +#define SIUMCR_MMR01 0x00004000 /* - " - */ +#define SIUMCR_MMR10 0x00008000 /* - " - */ +#define SIUMCR_MMR11 0x0000c000 /* - " - */ +#define SIUMCR_LPBSE 0x00002000 /* LocalBus Parity Byte Select Enable*/ + +/*----------------------------------------------------------------------- + * SCCR - System Clock Control Register 9-8 +*/ +#define SCCR_PCI_MODE 0x00000100 /* PCI Mode */ +#define SCCR_PCI_MODCK 0x00000080 /* Value of PCI_MODCK pin */ +#define SCCR_PCIDF_MSK 0x00000078 /* PCI division factor */ +#define SCCR_PCIDF_SHIFT 3 + +#ifndef CPM_IMMR_OFFSET +#define CPM_IMMR_OFFSET 0x101a8 +#endif + +#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */ + +/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK + * in order to use clock-computing stuff below for the FCC x + */ + +/* Automatically generates register configurations */ +#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */ + +#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */ +#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */ +#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */ +#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */ +#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */ +#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */ + +#define PC_F1RXCLK PC_CLK(F1_RXCLK) +#define PC_F1TXCLK PC_CLK(F1_TXCLK) +#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK)) +#define CMX1_CLK_MASK ((uint)0xff000000) + +#define PC_F2RXCLK PC_CLK(F2_RXCLK) +#define PC_F2TXCLK PC_CLK(F2_TXCLK) +#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK)) +#define CMX2_CLK_MASK ((uint)0x00ff0000) + +#define PC_F3RXCLK PC_CLK(F3_RXCLK) +#define PC_F3TXCLK PC_CLK(F3_TXCLK) +#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK)) +#define CMX3_CLK_MASK ((uint)0x0000ff00) + +#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK) +#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE) + +#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK) + +/* I/O Pin assignment for FCC1. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PA1_COL 0x00000001U +#define PA1_CRS 0x00000002U +#define PA1_TXER 0x00000004U +#define PA1_TXEN 0x00000008U +#define PA1_RXDV 0x00000010U +#define PA1_RXER 0x00000020U +#define PA1_TXDAT 0x00003c00U +#define PA1_RXDAT 0x0003c000U +#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT) +#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \ + PA1_RXDV | PA1_RXER) +#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV) +#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER) + + +/* I/O Pin assignment for FCC2. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB2_TXER 0x00000001U +#define PB2_RXDV 0x00000002U +#define PB2_TXEN 0x00000004U +#define PB2_RXER 0x00000008U +#define PB2_COL 0x00000010U +#define PB2_CRS 0x00000020U +#define PB2_TXDAT 0x000003c0U +#define PB2_RXDAT 0x00003c00U +#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \ + PB2_RXER | PB2_RXDV | PB2_TXER) +#define PB2_PSORB1 (PB2_TXEN) +#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV) +#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER) + + +/* I/O Pin assignment for FCC3. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB3_RXDV 0x00004000U +#define PB3_RXER 0x00008000U +#define PB3_TXER 0x00010000U +#define PB3_TXEN 0x00020000U +#define PB3_COL 0x00040000U +#define PB3_CRS 0x00080000U +#define PB3_TXDAT 0x0f000000U +#define PC3_TXDAT 0x00000010U +#define PB3_RXDAT 0x00f00000U +#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \ + PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN) +#define PB3_PSORB1 0 +#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV) +#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER) +#define PC3_DIRC1 (PC3_TXDAT) + +/* Handy macro to specify mem for FCCs*/ +#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128)) +#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0) +#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) +#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2) + +/* Clocks and GRG's */ + +enum cpm_clk_dir { + CPM_CLK_RX, + CPM_CLK_TX, + CPM_CLK_RTX +}; + +enum cpm_clk_target { + CPM_CLK_SCC1, + CPM_CLK_SCC2, + CPM_CLK_SCC3, + CPM_CLK_SCC4, + CPM_CLK_FCC1, + CPM_CLK_FCC2, + CPM_CLK_FCC3 +}; + +enum cpm_clk { + CPM_CLK_NONE = 0, + CPM_BRG1, /* Baud Rate Generator 1 */ + CPM_BRG2, /* Baud Rate Generator 2 */ + CPM_BRG3, /* Baud Rate Generator 3 */ + CPM_BRG4, /* Baud Rate Generator 4 */ + CPM_BRG5, /* Baud Rate Generator 5 */ + CPM_BRG6, /* Baud Rate Generator 6 */ + CPM_BRG7, /* Baud Rate Generator 7 */ + CPM_BRG8, /* Baud Rate Generator 8 */ + CPM_CLK1, /* Clock 1 */ + CPM_CLK2, /* Clock 2 */ + CPM_CLK3, /* Clock 3 */ + CPM_CLK4, /* Clock 4 */ + CPM_CLK5, /* Clock 5 */ + CPM_CLK6, /* Clock 6 */ + CPM_CLK7, /* Clock 7 */ + CPM_CLK8, /* Clock 8 */ + CPM_CLK9, /* Clock 9 */ + CPM_CLK10, /* Clock 10 */ + CPM_CLK11, /* Clock 11 */ + CPM_CLK12, /* Clock 12 */ + CPM_CLK13, /* Clock 13 */ + CPM_CLK14, /* Clock 14 */ + CPM_CLK15, /* Clock 15 */ + CPM_CLK16, /* Clock 16 */ + CPM_CLK17, /* Clock 17 */ + CPM_CLK18, /* Clock 18 */ + CPM_CLK19, /* Clock 19 */ + CPM_CLK20, /* Clock 20 */ + CPM_CLK_DUMMY +}; + +extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode); + +#endif /* __CPM2__ */ +#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h index 744d6bb24116..d05891608f74 100644 --- a/include/asm-powerpc/dma-mapping.h +++ b/include/asm-powerpc/dma-mapping.h @@ -249,8 +249,12 @@ dma_map_single(struct device *dev, void *ptr, size_t size, return virt_to_bus(ptr); } -/* We do nothing. */ -#define dma_unmap_single(dev, addr, size, dir) ((void)0) +static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction) +{ + /* We do nothing. */ +} static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, @@ -264,8 +268,12 @@ dma_map_page(struct device *dev, struct page *page, return page_to_bus(page) + offset; } -/* We do nothing. */ -#define dma_unmap_page(dev, handle, size, dir) ((void)0) +static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, + enum dma_data_direction direction) +{ + /* We do nothing. */ +} static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, @@ -284,8 +292,12 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, return nents; } -/* We don't do anything here. */ -#define dma_unmap_sg(dev, sg, nents, dir) ((void)0) +static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nhwentries, + enum dma_data_direction direction) +{ + /* We don't do anything here. */ +} #endif /* CONFIG_PPC64 */ diff --git a/include/asm-powerpc/exception.h b/include/asm-powerpc/exception.h new file mode 100644 index 000000000000..d850c8ea5903 --- /dev/null +++ b/include/asm-powerpc/exception.h @@ -0,0 +1,309 @@ +#ifndef _ASM_POWERPC_EXCEPTION_H +#define _ASM_POWERPC_EXCEPTION_H +/* + * Extracted from head_64.S + * + * PowerPC version + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP + * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> + * Adapted for Power Macintosh by Paul Mackerras. + * Low-level exception handlers and MMU support + * rewritten by Paul Mackerras. + * Copyright (C) 1996 Paul Mackerras. + * + * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com + * + * This file contains the low-level support and setup for the + * PowerPC-64 platform, including trap and interrupt dispatch. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +/* + * The following macros define the code that appears as + * the prologue to each of the exception handlers. They + * are split into two parts to allow a single kernel binary + * to be used for pSeries and iSeries. + * + * We make as much of the exception code common between native + * exception handlers (including pSeries LPAR) and iSeries LPAR + * implementations as possible. + */ + +#define EX_R9 0 +#define EX_R10 8 +#define EX_R11 16 +#define EX_R12 24 +#define EX_R13 32 +#define EX_SRR0 40 +#define EX_DAR 48 +#define EX_DSISR 56 +#define EX_CCR 60 +#define EX_R3 64 +#define EX_LR 72 + +/* + * We're short on space and time in the exception prolog, so we can't + * use the normal SET_REG_IMMEDIATE macro. Normally we just need the + * low halfword of the address, but for Kdump we need the whole low + * word. + */ +#ifdef CONFIG_CRASH_DUMP +#define LOAD_HANDLER(reg, label) \ + oris reg,reg,(label)@h; /* virt addr of handler ... */ \ + ori reg,reg,(label)@l; /* .. and the rest */ +#else +#define LOAD_HANDLER(reg, label) \ + ori reg,reg,(label)@l; /* virt addr of handler ... */ +#endif + +#define EXCEPTION_PROLOG_1(area) \ + mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + std r9,area+EX_R9(r13); /* save r9 - r12 */ \ + std r10,area+EX_R10(r13); \ + std r11,area+EX_R11(r13); \ + std r12,area+EX_R12(r13); \ + mfspr r9,SPRN_SPRG1; \ + std r9,area+EX_R13(r13); \ + mfcr r9 + +/* + * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode. + * The firmware calls the registered system_reset_fwnmi and + * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run + * a 32bit application at the time of the event. + * This firmware bug is present on POWER4 and JS20. + */ +#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label) \ + EXCEPTION_PROLOG_1(area); \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + /* force 64bit mode */ \ + li r11,5; /* MSR_SF_LG|MSR_ISF_LG */ \ + rldimi r10,r11,61,0; /* insert into top 3 bits */ \ + /* done 64bit mode */ \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + +#define EXCEPTION_PROLOG_PSERIES(area, label) \ + EXCEPTION_PROLOG_1(area); \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + +/* + * The common exception prolog is used for all except a few exceptions + * such as a segment miss on a kernel address. We have to be prepared + * to take another exception from the point where we first touch the + * kernel stack onwards. + * + * On entry r13 points to the paca, r9-r13 are saved in the paca, + * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and + * SRR1, and relocation is on. + */ +#define EXCEPTION_PROLOG_COMMON(n, area) \ + andi. r10,r12,MSR_PR; /* See if coming from user */ \ + mr r10,r1; /* Save r1 */ \ + subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \ + beq- 1f; \ + ld r1,PACAKSAVE(r13); /* kernel stack to use */ \ +1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \ + bge- cr1,2f; /* abort if it is */ \ + b 3f; \ +2: li r1,(n); /* will be reloaded later */ \ + sth r1,PACA_TRAP_SAVE(r13); \ + b bad_stack; \ +3: std r9,_CCR(r1); /* save CR in stackframe */ \ + std r11,_NIP(r1); /* save SRR0 in stackframe */ \ + std r12,_MSR(r1); /* save SRR1 in stackframe */ \ + std r10,0(r1); /* make stack chain pointer */ \ + std r0,GPR0(r1); /* save r0 in stackframe */ \ + std r10,GPR1(r1); /* save r1 in stackframe */ \ + ACCOUNT_CPU_USER_ENTRY(r9, r10); \ + std r2,GPR2(r1); /* save r2 in stackframe */ \ + SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ + SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ + ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \ + ld r10,area+EX_R10(r13); \ + std r9,GPR9(r1); \ + std r10,GPR10(r1); \ + ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \ + ld r10,area+EX_R12(r13); \ + ld r11,area+EX_R13(r13); \ + std r9,GPR11(r1); \ + std r10,GPR12(r1); \ + std r11,GPR13(r1); \ + ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ + mflr r9; /* save LR in stackframe */ \ + std r9,_LINK(r1); \ + mfctr r10; /* save CTR in stackframe */ \ + std r10,_CTR(r1); \ + lbz r10,PACASOFTIRQEN(r13); \ + mfspr r11,SPRN_XER; /* save XER in stackframe */ \ + std r10,SOFTE(r1); \ + std r11,_XER(r1); \ + li r9,(n)+1; \ + std r9,_TRAP(r1); /* set trap number */ \ + li r10,0; \ + ld r11,exception_marker@toc(r2); \ + std r10,RESULT(r1); /* clear regs->result */ \ + std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ + +/* + * Exception vectors. + */ +#define STD_EXCEPTION_PSERIES(n, label) \ + . = n; \ + .globl label##_pSeries; \ +label##_pSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) + +#define HSTD_EXCEPTION_PSERIES(n, label) \ + . = n; \ + .globl label##_pSeries; \ +label##_pSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r20; /* save r20 */ \ + mfspr r20,SPRN_HSRR0; /* copy HSRR0 to SRR0 */ \ + mtspr SPRN_SRR0,r20; \ + mfspr r20,SPRN_HSRR1; /* copy HSRR0 to SRR0 */ \ + mtspr SPRN_SRR1,r20; \ + mfspr r20,SPRN_SPRG1; /* restore r20 */ \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) + + +#define MASKABLE_EXCEPTION_PSERIES(n, label) \ + . = n; \ + .globl label##_pSeries; \ +label##_pSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \ + std r10,PACA_EXGEN+EX_R10(r13); \ + lbz r10,PACASOFTIRQEN(r13); \ + mfcr r9; \ + cmpwi r10,0; \ + beq masked_interrupt; \ + mfspr r10,SPRN_SPRG1; \ + std r10,PACA_EXGEN+EX_R13(r13); \ + std r11,PACA_EXGEN+EX_R11(r13); \ + std r12,PACA_EXGEN+EX_R12(r13); \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label##_common) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + +#ifdef CONFIG_PPC_ISERIES +#define DISABLE_INTS \ + li r11,0; \ + stb r11,PACASOFTIRQEN(r13); \ +BEGIN_FW_FTR_SECTION; \ + stb r11,PACAHARDIRQEN(r13); \ +END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \ +BEGIN_FW_FTR_SECTION; \ + mfmsr r10; \ + ori r10,r10,MSR_EE; \ + mtmsrd r10,1; \ +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) + +#else +#define DISABLE_INTS \ + li r11,0; \ + stb r11,PACASOFTIRQEN(r13); \ + stb r11,PACAHARDIRQEN(r13) + +#endif /* CONFIG_PPC_ISERIES */ + +#define ENABLE_INTS \ + ld r12,_MSR(r1); \ + mfmsr r11; \ + rlwimi r11,r12,0,MSR_EE; \ + mtmsrd r11,1 + +#define STD_EXCEPTION_COMMON(trap, label, hdlr) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + DISABLE_INTS; \ + bl .save_nvgprs; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except + +/* + * Like STD_EXCEPTION_COMMON, but for exceptions that can occur + * in the idle task and therefore need the special idle handling. + */ +#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + FINISH_NAP; \ + DISABLE_INTS; \ + bl .save_nvgprs; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except + +#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + FINISH_NAP; \ + DISABLE_INTS; \ + bl .ppc64_runlatch_on; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except_lite + +/* + * When the idle code in power4_idle puts the CPU into NAP mode, + * it has to do so in a loop, and relies on the external interrupt + * and decrementer interrupt entry code to get it out of the loop. + * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags + * to signal that it is in the loop and needs help to get out. + */ +#ifdef CONFIG_PPC_970_NAP +#define FINISH_NAP \ +BEGIN_FTR_SECTION \ + clrrdi r11,r1,THREAD_SHIFT; \ + ld r9,TI_LOCAL_FLAGS(r11); \ + andi. r10,r9,_TLF_NAPPING; \ + bnel power4_fixup_nap; \ +END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) +#else +#define FINISH_NAP +#endif + +#endif /* _ASM_POWERPC_EXCEPTION_H */ diff --git a/include/asm-powerpc/highmem.h b/include/asm-powerpc/highmem.h new file mode 100644 index 000000000000..f7b21ee302b4 --- /dev/null +++ b/include/asm-powerpc/highmem.h @@ -0,0 +1,135 @@ +/* + * highmem.h: virtual kernel memory mappings for high memory + * + * PowerPC version, stolen from the i386 version. + * + * Used in CONFIG_HIGHMEM systems for memory pages which + * are not addressable by direct kernel virtual addresses. + * + * Copyright (C) 1999 Gerhard Wichert, Siemens AG + * Gerhard.Wichert@pdb.siemens.de + * + * + * Redesigned the x86 32-bit VM architecture to deal with + * up to 16 Terrabyte physical memory. With current x86 CPUs + * we now support up to 64 Gigabytes physical RAM. + * + * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com> + */ + +#ifndef _ASM_HIGHMEM_H +#define _ASM_HIGHMEM_H + +#ifdef __KERNEL__ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <asm/kmap_types.h> +#include <asm/tlbflush.h> +#include <asm/page.h> + +/* undef for production */ +#define HIGHMEM_DEBUG 1 + +extern pte_t *kmap_pte; +extern pgprot_t kmap_prot; +extern pte_t *pkmap_page_table; + +/* + * Right now we initialize only a single pte table. It can be extended + * easily, subsequent pte tables have to be allocated in one physical + * chunk of RAM. + */ +#define PKMAP_BASE CONFIG_HIGHMEM_START +#define LAST_PKMAP (1 << PTE_SHIFT) +#define LAST_PKMAP_MASK (LAST_PKMAP-1) +#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT) +#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) + +#define KMAP_FIX_BEGIN (PKMAP_BASE + 0x00400000UL) + +extern void *kmap_high(struct page *page); +extern void kunmap_high(struct page *page); + +static inline void *kmap(struct page *page) +{ + might_sleep(); + if (!PageHighMem(page)) + return page_address(page); + return kmap_high(page); +} + +static inline void kunmap(struct page *page) +{ + BUG_ON(in_interrupt()); + if (!PageHighMem(page)) + return; + kunmap_high(page); +} + +/* + * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap + * gives a more generic (and caching) interface. But kmap_atomic can + * be used in IRQ contexts, so in some (very limited) cases we need + * it. + */ +static inline void *kmap_atomic(struct page *page, enum km_type type) +{ + unsigned int idx; + unsigned long vaddr; + + /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */ + pagefault_disable(); + if (!PageHighMem(page)) + return page_address(page); + + idx = type + KM_TYPE_NR*smp_processor_id(); + vaddr = KMAP_FIX_BEGIN + idx * PAGE_SIZE; +#ifdef HIGHMEM_DEBUG + BUG_ON(!pte_none(*(kmap_pte+idx))); +#endif + set_pte_at(&init_mm, vaddr, kmap_pte+idx, mk_pte(page, kmap_prot)); + flush_tlb_page(NULL, vaddr); + + return (void*) vaddr; +} + +static inline void kunmap_atomic(void *kvaddr, enum km_type type) +{ +#ifdef HIGHMEM_DEBUG + unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK; + unsigned int idx = type + KM_TYPE_NR*smp_processor_id(); + + if (vaddr < KMAP_FIX_BEGIN) { // FIXME + pagefault_enable(); + return; + } + + BUG_ON(vaddr != KMAP_FIX_BEGIN + idx * PAGE_SIZE); + + /* + * force other mappings to Oops if they'll try to access + * this pte without first remap it + */ + pte_clear(&init_mm, vaddr, kmap_pte+idx); + flush_tlb_page(NULL, vaddr); +#endif + pagefault_enable(); +} + +static inline struct page *kmap_atomic_to_page(void *ptr) +{ + unsigned long idx, vaddr = (unsigned long) ptr; + + if (vaddr < KMAP_FIX_BEGIN) + return virt_to_page(ptr); + + idx = (vaddr - KMAP_FIX_BEGIN) >> PAGE_SHIFT; + return pte_page(kmap_pte[idx]); +} + +#define flush_cache_kmaps() flush_cache_all() + +#endif /* __KERNEL__ */ + +#endif /* _ASM_HIGHMEM_H */ diff --git a/include/asm-powerpc/hydra.h b/include/asm-powerpc/hydra.h new file mode 100644 index 000000000000..1ad4eed07fbe --- /dev/null +++ b/include/asm-powerpc/hydra.h @@ -0,0 +1,102 @@ +/* + * include/asm-ppc/hydra.h -- Mac I/O `Hydra' definitions + * + * Copyright (C) 1997 Geert Uytterhoeven + * + * This file is based on the following documentation: + * + * Macintosh Technology in the Common Hardware Reference Platform + * Apple Computer, Inc. + * + * © Copyright 1995 Apple Computer, Inc. All rights reserved. + * + * It's available online from http://chrp.apple.com/MacTech.pdf. + * You can obtain paper copies of this book from computer bookstores or by + * writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San + * Francisco, CA 94104. Reference ISBN 1-55860-393-X. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef _ASMPPC_HYDRA_H +#define _ASMPPC_HYDRA_H + +#ifdef __KERNEL__ + +struct Hydra { + /* DBDMA Controller Register Space */ + char Pad1[0x30]; + u_int CachePD; + u_int IDs; + u_int Feature_Control; + char Pad2[0x7fc4]; + /* DBDMA Channel Register Space */ + char SCSI_DMA[0x100]; + char Pad3[0x300]; + char SCCA_Tx_DMA[0x100]; + char SCCA_Rx_DMA[0x100]; + char SCCB_Tx_DMA[0x100]; + char SCCB_Rx_DMA[0x100]; + char Pad4[0x7800]; + /* Device Register Space */ + char SCSI[0x1000]; + char ADB[0x1000]; + char SCC_Legacy[0x1000]; + char SCC[0x1000]; + char Pad9[0x2000]; + char VIA[0x2000]; + char Pad10[0x28000]; + char OpenPIC[0x40000]; +}; + +extern volatile struct Hydra __iomem *Hydra; + + + /* + * Feature Control Register + */ + +#define HYDRA_FC_SCC_CELL_EN 0x00000001 /* Enable SCC Clock */ +#define HYDRA_FC_SCSI_CELL_EN 0x00000002 /* Enable SCSI Clock */ +#define HYDRA_FC_SCCA_ENABLE 0x00000004 /* Enable SCC A Lines */ +#define HYDRA_FC_SCCB_ENABLE 0x00000008 /* Enable SCC B Lines */ +#define HYDRA_FC_ARB_BYPASS 0x00000010 /* Bypass Internal Arbiter */ +#define HYDRA_FC_RESET_SCC 0x00000020 /* Reset SCC */ +#define HYDRA_FC_MPIC_ENABLE 0x00000040 /* Enable OpenPIC */ +#define HYDRA_FC_SLOW_SCC_PCLK 0x00000080 /* 1=15.6672, 0=25 MHz */ +#define HYDRA_FC_MPIC_IS_MASTER 0x00000100 /* OpenPIC Master Mode */ + + + /* + * OpenPIC Interrupt Sources + */ + +#define HYDRA_INT_SIO 0 +#define HYDRA_INT_SCSI_DMA 1 +#define HYDRA_INT_SCCA_TX_DMA 2 +#define HYDRA_INT_SCCA_RX_DMA 3 +#define HYDRA_INT_SCCB_TX_DMA 4 +#define HYDRA_INT_SCCB_RX_DMA 5 +#define HYDRA_INT_SCSI 6 +#define HYDRA_INT_SCCA 7 +#define HYDRA_INT_SCCB 8 +#define HYDRA_INT_VIA 9 +#define HYDRA_INT_ADB 10 +#define HYDRA_INT_ADB_NMI 11 +#define HYDRA_INT_EXT1 12 /* PCI IRQW */ +#define HYDRA_INT_EXT2 13 /* PCI IRQX */ +#define HYDRA_INT_EXT3 14 /* PCI IRQY */ +#define HYDRA_INT_EXT4 15 /* PCI IRQZ */ +#define HYDRA_INT_EXT5 16 /* IDE Primay/Secondary */ +#define HYDRA_INT_EXT6 17 /* IDE Secondary */ +#define HYDRA_INT_EXT7 18 /* Power Off Request */ +#define HYDRA_INT_SPARE 19 + +extern int hydra_init(void); +extern void macio_adb_init(void); + +#endif /* __KERNEL__ */ + +#endif /* _ASMPPC_HYDRA_H */ diff --git a/include/asm-powerpc/immap_cpm2.h b/include/asm-powerpc/immap_cpm2.h new file mode 100644 index 000000000000..f316a91c628a --- /dev/null +++ b/include/asm-powerpc/immap_cpm2.h @@ -0,0 +1,648 @@ +/* + * CPM2 Internal Memory Map + * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) + * + * The Internal Memory Map for devices with CPM2 on them. This + * is the superset of all CPM2 devices (8260, 8266, 8280, 8272, + * 8560). + */ +#ifdef __KERNEL__ +#ifndef __IMMAP_CPM2__ +#define __IMMAP_CPM2__ + +/* System configuration registers. +*/ +typedef struct sys_82xx_conf { + u32 sc_siumcr; + u32 sc_sypcr; + u8 res1[6]; + u16 sc_swsr; + u8 res2[20]; + u32 sc_bcr; + u8 sc_ppc_acr; + u8 res3[3]; + u32 sc_ppc_alrh; + u32 sc_ppc_alrl; + u8 sc_lcl_acr; + u8 res4[3]; + u32 sc_lcl_alrh; + u32 sc_lcl_alrl; + u32 sc_tescr1; + u32 sc_tescr2; + u32 sc_ltescr1; + u32 sc_ltescr2; + u32 sc_pdtea; + u8 sc_pdtem; + u8 res5[3]; + u32 sc_ldtea; + u8 sc_ldtem; + u8 res6[163]; +} sysconf_82xx_cpm2_t; + +typedef struct sys_85xx_conf { + u32 sc_cear; + u16 sc_ceer; + u16 sc_cemr; + u8 res1[70]; + u32 sc_smaer; + u8 res2[4]; + u32 sc_smevr; + u32 sc_smctr; + u32 sc_lmaer; + u8 res3[4]; + u32 sc_lmevr; + u32 sc_lmctr; + u8 res4[144]; +} sysconf_85xx_cpm2_t; + +typedef union sys_conf { + sysconf_82xx_cpm2_t siu_82xx; + sysconf_85xx_cpm2_t siu_85xx; +} sysconf_cpm2_t; + + + +/* Memory controller registers. +*/ +typedef struct mem_ctlr { + u32 memc_br0; + u32 memc_or0; + u32 memc_br1; + u32 memc_or1; + u32 memc_br2; + u32 memc_or2; + u32 memc_br3; + u32 memc_or3; + u32 memc_br4; + u32 memc_or4; + u32 memc_br5; + u32 memc_or5; + u32 memc_br6; + u32 memc_or6; + u32 memc_br7; + u32 memc_or7; + u32 memc_br8; + u32 memc_or8; + u32 memc_br9; + u32 memc_or9; + u32 memc_br10; + u32 memc_or10; + u32 memc_br11; + u32 memc_or11; + u8 res1[8]; + u32 memc_mar; + u8 res2[4]; + u32 memc_mamr; + u32 memc_mbmr; + u32 memc_mcmr; + u8 res3[8]; + u16 memc_mptpr; + u8 res4[2]; + u32 memc_mdr; + u8 res5[4]; + u32 memc_psdmr; + u32 memc_lsdmr; + u8 memc_purt; + u8 res6[3]; + u8 memc_psrt; + u8 res7[3]; + u8 memc_lurt; + u8 res8[3]; + u8 memc_lsrt; + u8 res9[3]; + u32 memc_immr; + u32 memc_pcibr0; + u32 memc_pcibr1; + u8 res10[16]; + u32 memc_pcimsk0; + u32 memc_pcimsk1; + u8 res11[52]; +} memctl_cpm2_t; + +/* System Integration Timers. +*/ +typedef struct sys_int_timers { + u8 res1[32]; + u16 sit_tmcntsc; + u8 res2[2]; + u32 sit_tmcnt; + u8 res3[4]; + u32 sit_tmcntal; + u8 res4[16]; + u16 sit_piscr; + u8 res5[2]; + u32 sit_pitc; + u32 sit_pitr; + u8 res6[94]; + u8 res7[390]; +} sit_cpm2_t; + +#define PISCR_PIRQ_MASK ((u16)0xff00) +#define PISCR_PS ((u16)0x0080) +#define PISCR_PIE ((u16)0x0004) +#define PISCR_PTF ((u16)0x0002) +#define PISCR_PTE ((u16)0x0001) + +/* PCI Controller. +*/ +typedef struct pci_ctlr { + u32 pci_omisr; + u32 pci_omimr; + u8 res1[8]; + u32 pci_ifqpr; + u32 pci_ofqpr; + u8 res2[8]; + u32 pci_imr0; + u32 pci_imr1; + u32 pci_omr0; + u32 pci_omr1; + u32 pci_odr; + u8 res3[4]; + u32 pci_idr; + u8 res4[20]; + u32 pci_imisr; + u32 pci_imimr; + u8 res5[24]; + u32 pci_ifhpr; + u8 res6[4]; + u32 pci_iftpr; + u8 res7[4]; + u32 pci_iphpr; + u8 res8[4]; + u32 pci_iptpr; + u8 res9[4]; + u32 pci_ofhpr; + u8 res10[4]; + u32 pci_oftpr; + u8 res11[4]; + u32 pci_ophpr; + u8 res12[4]; + u32 pci_optpr; + u8 res13[8]; + u32 pci_mucr; + u8 res14[8]; + u32 pci_qbar; + u8 res15[12]; + u32 pci_dmamr0; + u32 pci_dmasr0; + u32 pci_dmacdar0; + u8 res16[4]; + u32 pci_dmasar0; + u8 res17[4]; + u32 pci_dmadar0; + u8 res18[4]; + u32 pci_dmabcr0; + u32 pci_dmandar0; + u8 res19[86]; + u32 pci_dmamr1; + u32 pci_dmasr1; + u32 pci_dmacdar1; + u8 res20[4]; + u32 pci_dmasar1; + u8 res21[4]; + u32 pci_dmadar1; + u8 res22[4]; + u32 pci_dmabcr1; + u32 pci_dmandar1; + u8 res23[88]; + u32 pci_dmamr2; + u32 pci_dmasr2; + u32 pci_dmacdar2; + u8 res24[4]; + u32 pci_dmasar2; + u8 res25[4]; + u32 pci_dmadar2; + u8 res26[4]; + u32 pci_dmabcr2; + u32 pci_dmandar2; + u8 res27[88]; + u32 pci_dmamr3; + u32 pci_dmasr3; + u32 pci_dmacdar3; + u8 res28[4]; + u32 pci_dmasar3; + u8 res29[4]; + u32 pci_dmadar3; + u8 res30[4]; + u32 pci_dmabcr3; + u32 pci_dmandar3; + u8 res31[344]; + u32 pci_potar0; + u8 res32[4]; + u32 pci_pobar0; + u8 res33[4]; + u32 pci_pocmr0; + u8 res34[4]; + u32 pci_potar1; + u8 res35[4]; + u32 pci_pobar1; + u8 res36[4]; + u32 pci_pocmr1; + u8 res37[4]; + u32 pci_potar2; + u8 res38[4]; + u32 pci_pobar2; + u8 res39[4]; + u32 pci_pocmr2; + u8 res40[50]; + u32 pci_ptcr; + u32 pci_gpcr; + u32 pci_gcr; + u32 pci_esr; + u32 pci_emr; + u32 pci_ecr; + u32 pci_eacr; + u8 res41[4]; + u32 pci_edcr; + u8 res42[4]; + u32 pci_eccr; + u8 res43[44]; + u32 pci_pitar1; + u8 res44[4]; + u32 pci_pibar1; + u8 res45[4]; + u32 pci_picmr1; + u8 res46[4]; + u32 pci_pitar0; + u8 res47[4]; + u32 pci_pibar0; + u8 res48[4]; + u32 pci_picmr0; + u8 res49[4]; + u32 pci_cfg_addr; + u32 pci_cfg_data; + u32 pci_int_ack; + u8 res50[756]; +} pci_cpm2_t; + +/* Interrupt Controller. +*/ +typedef struct interrupt_controller { + u16 ic_sicr; + u8 res1[2]; + u32 ic_sivec; + u32 ic_sipnrh; + u32 ic_sipnrl; + u32 ic_siprr; + u32 ic_scprrh; + u32 ic_scprrl; + u32 ic_simrh; + u32 ic_simrl; + u32 ic_siexr; + u8 res2[88]; +} intctl_cpm2_t; + +/* Clocks and Reset. +*/ +typedef struct clk_and_reset { + u32 car_sccr; + u8 res1[4]; + u32 car_scmr; + u8 res2[4]; + u32 car_rsr; + u32 car_rmr; + u8 res[104]; +} car_cpm2_t; + +/* Input/Output Port control/status registers. + * Names consistent with processor manual, although they are different + * from the original 8xx names....... + */ +typedef struct io_port { + u32 iop_pdira; + u32 iop_ppara; + u32 iop_psora; + u32 iop_podra; + u32 iop_pdata; + u8 res1[12]; + u32 iop_pdirb; + u32 iop_pparb; + u32 iop_psorb; + u32 iop_podrb; + u32 iop_pdatb; + u8 res2[12]; + u32 iop_pdirc; + u32 iop_pparc; + u32 iop_psorc; + u32 iop_podrc; + u32 iop_pdatc; + u8 res3[12]; + u32 iop_pdird; + u32 iop_ppard; + u32 iop_psord; + u32 iop_podrd; + u32 iop_pdatd; + u8 res4[12]; +} iop_cpm2_t; + +/* Communication Processor Module Timers +*/ +typedef struct cpm_timers { + u8 cpmt_tgcr1; + u8 res1[3]; + u8 cpmt_tgcr2; + u8 res2[11]; + u16 cpmt_tmr1; + u16 cpmt_tmr2; + u16 cpmt_trr1; + u16 cpmt_trr2; + u16 cpmt_tcr1; + u16 cpmt_tcr2; + u16 cpmt_tcn1; + u16 cpmt_tcn2; + u16 cpmt_tmr3; + u16 cpmt_tmr4; + u16 cpmt_trr3; + u16 cpmt_trr4; + u16 cpmt_tcr3; + u16 cpmt_tcr4; + u16 cpmt_tcn3; + u16 cpmt_tcn4; + u16 cpmt_ter1; + u16 cpmt_ter2; + u16 cpmt_ter3; + u16 cpmt_ter4; + u8 res3[584]; +} cpmtimer_cpm2_t; + +/* DMA control/status registers. +*/ +typedef struct sdma_csr { + u8 res0[24]; + u8 sdma_sdsr; + u8 res1[3]; + u8 sdma_sdmr; + u8 res2[3]; + u8 sdma_idsr1; + u8 res3[3]; + u8 sdma_idmr1; + u8 res4[3]; + u8 sdma_idsr2; + u8 res5[3]; + u8 sdma_idmr2; + u8 res6[3]; + u8 sdma_idsr3; + u8 res7[3]; + u8 sdma_idmr3; + u8 res8[3]; + u8 sdma_idsr4; + u8 res9[3]; + u8 sdma_idmr4; + u8 res10[707]; +} sdma_cpm2_t; + +/* Fast controllers +*/ +typedef struct fcc { + u32 fcc_gfmr; + u32 fcc_fpsmr; + u16 fcc_ftodr; + u8 res1[2]; + u16 fcc_fdsr; + u8 res2[2]; + u16 fcc_fcce; + u8 res3[2]; + u16 fcc_fccm; + u8 res4[2]; + u8 fcc_fccs; + u8 res5[3]; + u8 fcc_ftirr_phy[4]; +} fcc_t; + +/* Fast controllers continued + */ +typedef struct fcc_c { + u32 fcc_firper; + u32 fcc_firer; + u32 fcc_firsr_hi; + u32 fcc_firsr_lo; + u8 fcc_gfemr; + u8 res1[15]; +} fcc_c_t; + +/* TC Layer + */ +typedef struct tclayer { + u16 tc_tcmode; + u16 tc_cdsmr; + u16 tc_tcer; + u16 tc_rcc; + u16 tc_tcmr; + u16 tc_fcc; + u16 tc_ccc; + u16 tc_icc; + u16 tc_tcc; + u16 tc_ecc; + u8 res1[12]; +} tclayer_t; + + +/* I2C +*/ +typedef struct i2c { + u8 i2c_i2mod; + u8 res1[3]; + u8 i2c_i2add; + u8 res2[3]; + u8 i2c_i2brg; + u8 res3[3]; + u8 i2c_i2com; + u8 res4[3]; + u8 i2c_i2cer; + u8 res5[3]; + u8 i2c_i2cmr; + u8 res6[331]; +} i2c_cpm2_t; + +typedef struct scc { /* Serial communication channels */ + u32 scc_gsmrl; + u32 scc_gsmrh; + u16 scc_psmr; + u8 res1[2]; + u16 scc_todr; + u16 scc_dsr; + u16 scc_scce; + u8 res2[2]; + u16 scc_sccm; + u8 res3; + u8 scc_sccs; + u8 res4[8]; +} scc_t; + +typedef struct smc { /* Serial management channels */ + u8 res1[2]; + u16 smc_smcmr; + u8 res2[2]; + u8 smc_smce; + u8 res3[3]; + u8 smc_smcm; + u8 res4[5]; +} smc_t; + +/* Serial Peripheral Interface. +*/ +typedef struct spi_ctrl { + u16 spi_spmode; + u8 res1[4]; + u8 spi_spie; + u8 res2[3]; + u8 spi_spim; + u8 res3[2]; + u8 spi_spcom; + u8 res4[82]; +} spictl_cpm2_t; + +/* CPM Mux. +*/ +typedef struct cpmux { + u8 cmx_si1cr; + u8 res1; + u8 cmx_si2cr; + u8 res2; + u32 cmx_fcr; + u32 cmx_scr; + u8 cmx_smr; + u8 res3; + u16 cmx_uar; + u8 res4[16]; +} cpmux_t; + +/* SIRAM control +*/ +typedef struct siram { + u16 si_amr; + u16 si_bmr; + u16 si_cmr; + u16 si_dmr; + u8 si_gmr; + u8 res1; + u8 si_cmdr; + u8 res2; + u8 si_str; + u8 res3; + u16 si_rsr; +} siramctl_t; + +typedef struct mcc { + u16 mcc_mcce; + u8 res1[2]; + u16 mcc_mccm; + u8 res2[2]; + u8 mcc_mccf; + u8 res3[7]; +} mcc_t; + +typedef struct comm_proc { + u32 cp_cpcr; + u32 cp_rccr; + u8 res1[14]; + u16 cp_rter; + u8 res2[2]; + u16 cp_rtmr; + u16 cp_rtscr; + u8 res3[2]; + u32 cp_rtsr; + u8 res4[12]; +} cpm_cpm2_t; + +/* USB Controller. +*/ +typedef struct usb_ctlr { + u8 usb_usmod; + u8 usb_usadr; + u8 usb_uscom; + u8 res1[1]; + u16 usb_usep1; + u16 usb_usep2; + u16 usb_usep3; + u16 usb_usep4; + u8 res2[4]; + u16 usb_usber; + u8 res3[2]; + u16 usb_usbmr; + u8 usb_usbs; + u8 res4[7]; +} usb_cpm2_t; + +/* ...and the whole thing wrapped up.... +*/ + +typedef struct immap { + /* Some references are into the unique and known dpram spaces, + * others are from the generic base. + */ +#define im_dprambase im_dpram1 + u8 im_dpram1[16*1024]; + u8 res1[16*1024]; + u8 im_dpram2[4*1024]; + u8 res2[8*1024]; + u8 im_dpram3[4*1024]; + u8 res3[16*1024]; + + sysconf_cpm2_t im_siu_conf; /* SIU Configuration */ + memctl_cpm2_t im_memctl; /* Memory Controller */ + sit_cpm2_t im_sit; /* System Integration Timers */ + pci_cpm2_t im_pci; /* PCI Controller */ + intctl_cpm2_t im_intctl; /* Interrupt Controller */ + car_cpm2_t im_clkrst; /* Clocks and reset */ + iop_cpm2_t im_ioport; /* IO Port control/status */ + cpmtimer_cpm2_t im_cpmtimer; /* CPM timers */ + sdma_cpm2_t im_sdma; /* SDMA control/status */ + + fcc_t im_fcc[3]; /* Three FCCs */ + u8 res4z[32]; + fcc_c_t im_fcc_c[3]; /* Continued FCCs */ + + u8 res4[32]; + + tclayer_t im_tclayer[8]; /* Eight TCLayers */ + u16 tc_tcgsr; + u16 tc_tcger; + + /* First set of baud rate generators. + */ + u8 res[236]; + u32 im_brgc5; + u32 im_brgc6; + u32 im_brgc7; + u32 im_brgc8; + + u8 res5[608]; + + i2c_cpm2_t im_i2c; /* I2C control/status */ + cpm_cpm2_t im_cpm; /* Communication processor */ + + /* Second set of baud rate generators. + */ + u32 im_brgc1; + u32 im_brgc2; + u32 im_brgc3; + u32 im_brgc4; + + scc_t im_scc[4]; /* Four SCCs */ + smc_t im_smc[2]; /* Couple of SMCs */ + spictl_cpm2_t im_spi; /* A SPI */ + cpmux_t im_cpmux; /* CPM clock route mux */ + siramctl_t im_siramctl1; /* First SI RAM Control */ + mcc_t im_mcc1; /* First MCC */ + siramctl_t im_siramctl2; /* Second SI RAM Control */ + mcc_t im_mcc2; /* Second MCC */ + usb_cpm2_t im_usb; /* USB Controller */ + + u8 res6[1153]; + + u16 im_si1txram[256]; + u8 res7[512]; + u16 im_si1rxram[256]; + u8 res8[512]; + u16 im_si2txram[256]; + u8 res9[512]; + u16 im_si2rxram[256]; + u8 res10[512]; + u8 res11[4096]; +} cpm2_map_t; + +extern cpm2_map_t *cpm2_immr; + +#endif /* __IMMAP_CPM2__ */ +#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index bb8d965f96c6..4c0b55087dc7 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -734,6 +734,9 @@ static inline void * bus_to_virt(unsigned long address) #define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v)) #define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v)) +#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) | (_v)) +#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v)) + #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_IO_H */ diff --git a/include/asm-powerpc/iseries/lpar_map.h b/include/asm-powerpc/iseries/lpar_map.h index 2ec384d66abb..5e9f3e128ee2 100644 --- a/include/asm-powerpc/iseries/lpar_map.h +++ b/include/asm-powerpc/iseries/lpar_map.h @@ -22,6 +22,8 @@ #include <asm/types.h> +#endif + /* * The iSeries hypervisor will set up mapping for one or more * ESID/VSID pairs (in SLB/segment registers) and will set up @@ -56,6 +58,7 @@ /* Hypervisor initially maps 32MB of the load area */ #define HvPagesToMap 8192 +#ifndef __ASSEMBLY__ struct LparMap { u64 xNumberEsids; // Number of ESID/VSID pairs u64 xNumberRanges; // Number of VA ranges to map diff --git a/include/asm-powerpc/kgdb.h b/include/asm-powerpc/kgdb.h new file mode 100644 index 000000000000..b617dac82969 --- /dev/null +++ b/include/asm-powerpc/kgdb.h @@ -0,0 +1,57 @@ +/* + * kgdb.h: Defines and declarations for serial line source level + * remote debugging of the Linux kernel using gdb. + * + * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu) + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ +#ifdef __KERNEL__ +#ifndef _PPC_KGDB_H +#define _PPC_KGDB_H + +#ifndef __ASSEMBLY__ + +/* Things specific to the gen550 backend. */ +struct uart_port; + +extern void gen550_progress(char *, unsigned short); +extern void gen550_kgdb_map_scc(void); +extern void gen550_init(int, struct uart_port *); + +/* Things specific to the pmac backend. */ +extern void zs_kgdb_hook(int tty_num); + +/* To init the kgdb engine. (called by serial hook)*/ +extern void set_debug_traps(void); + +/* To enter the debugger explicitly. */ +extern void breakpoint(void); + +/* For taking exceptions + * these are defined in traps.c + */ +extern int (*debugger)(struct pt_regs *regs); +extern int (*debugger_bpt)(struct pt_regs *regs); +extern int (*debugger_sstep)(struct pt_regs *regs); +extern int (*debugger_iabr_match)(struct pt_regs *regs); +extern int (*debugger_dabr_match)(struct pt_regs *regs); +extern void (*debugger_fault_handler)(struct pt_regs *regs); + +/* What we bring to the party */ +int kgdb_bpt(struct pt_regs *regs); +int kgdb_sstep(struct pt_regs *regs); +void kgdb(struct pt_regs *regs); +int kgdb_iabr_match(struct pt_regs *regs); +int kgdb_dabr_match(struct pt_regs *regs); + +/* + * external low-level support routines (ie macserial.c) + */ +extern void kgdb_interruptible(int); /* control interrupts from serial */ +extern void putDebugChar(char); /* write a single character */ +extern char getDebugChar(void); /* read and return a single char */ + +#endif /* !(__ASSEMBLY__) */ +#endif /* !(_PPC_KGDB_H) */ +#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/lmb.h b/include/asm-powerpc/lmb.h index 0c5880f70225..b5f9f4c9c294 100644 --- a/include/asm-powerpc/lmb.h +++ b/include/asm-powerpc/lmb.h @@ -1,5 +1,5 @@ -#ifndef _PPC64_LMB_H -#define _PPC64_LMB_H +#ifndef _ASM_POWERPC_LMB_H +#define _ASM_POWERPC_LMB_H #ifdef __KERNEL__ /* @@ -77,4 +77,4 @@ lmb_end_pfn(struct lmb_region *type, unsigned long region_nr) } #endif /* __KERNEL__ */ -#endif /* _PPC64_LMB_H */ +#endif /* _ASM_POWERPC_LMB_H */ diff --git a/include/asm-powerpc/mmu-40x.h b/include/asm-powerpc/mmu-40x.h new file mode 100644 index 000000000000..7d37f77043ac --- /dev/null +++ b/include/asm-powerpc/mmu-40x.h @@ -0,0 +1,65 @@ +#ifndef _ASM_POWERPC_MMU_40X_H_ +#define _ASM_POWERPC_MMU_40X_H_ + +/* + * PPC40x support + */ + +#define PPC40X_TLB_SIZE 64 + +/* + * TLB entries are defined by a "high" tag portion and a "low" data + * portion. On all architectures, the data portion is 32-bits. + * + * TLB entries are managed entirely under software control by reading, + * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx + * instructions. + */ + +#define TLB_LO 1 +#define TLB_HI 0 + +#define TLB_DATA TLB_LO +#define TLB_TAG TLB_HI + +/* Tag portion */ + +#define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */ +#define TLB_PAGESZ_MASK 0x00000380 +#define TLB_PAGESZ(x) (((x) & 0x7) << 7) +#define PAGESZ_1K 0 +#define PAGESZ_4K 1 +#define PAGESZ_16K 2 +#define PAGESZ_64K 3 +#define PAGESZ_256K 4 +#define PAGESZ_1M 5 +#define PAGESZ_4M 6 +#define PAGESZ_16M 7 +#define TLB_VALID 0x00000040 /* Entry is valid */ + +/* Data portion */ + +#define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */ +#define TLB_PERM_MASK 0x00000300 +#define TLB_EX 0x00000200 /* Instruction execution allowed */ +#define TLB_WR 0x00000100 /* Writes permitted */ +#define TLB_ZSEL_MASK 0x000000F0 +#define TLB_ZSEL(x) (((x) & 0xF) << 4) +#define TLB_ATTR_MASK 0x0000000F +#define TLB_W 0x00000008 /* Caching is write-through */ +#define TLB_I 0x00000004 /* Caching is inhibited */ +#define TLB_M 0x00000002 /* Memory is coherent */ +#define TLB_G 0x00000001 /* Memory is guarded from prefetch */ + +#ifndef __ASSEMBLY__ + +typedef unsigned long phys_addr_t; + +typedef struct { + unsigned long id; + unsigned long vdso_base; +} mm_context_t; + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_MMU_40X_H_ */ diff --git a/include/asm-powerpc/mmu.h b/include/asm-powerpc/mmu.h index d44d211e7588..4c0e1b4f975c 100644 --- a/include/asm-powerpc/mmu.h +++ b/include/asm-powerpc/mmu.h @@ -8,6 +8,9 @@ #elif defined(CONFIG_PPC_STD_MMU) /* 32-bit classic hash table MMU */ # include <asm/mmu-hash32.h> +#elif defined(CONFIG_40x) +/* 40x-style software loaded TLB */ +# include <asm/mmu-40x.h> #elif defined(CONFIG_44x) /* 44x-style software loaded TLB */ # include <asm/mmu-44x.h> diff --git a/include/asm-powerpc/mpc52xx_psc.h b/include/asm-powerpc/mpc52xx_psc.h new file mode 100644 index 000000000000..26690d2b32f5 --- /dev/null +++ b/include/asm-powerpc/mpc52xx_psc.h @@ -0,0 +1,191 @@ +/* + * include/asm-ppc/mpc52xx_psc.h + * + * Definitions of consts/structs to drive the Freescale MPC52xx OnChip + * PSCs. Theses are shared between multiple drivers since a PSC can be + * UART, AC97, IR, I2S, ... So this header is in asm-ppc. + * + * + * Maintainer : Sylvain Munaut <tnt@246tNt.com> + * + * Based/Extracted from some header of the 2.4 originally written by + * Dale Farnsworth <dfarnsworth@mvista.com> + * + * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com> + * Copyright (C) 2003 MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __ASM_MPC52xx_PSC_H__ +#define __ASM_MPC52xx_PSC_H__ + +#include <asm/types.h> + +/* Max number of PSCs */ +#define MPC52xx_PSC_MAXNUM 6 + +/* Programmable Serial Controller (PSC) status register bits */ +#define MPC52xx_PSC_SR_CDE 0x0080 +#define MPC52xx_PSC_SR_RXRDY 0x0100 +#define MPC52xx_PSC_SR_RXFULL 0x0200 +#define MPC52xx_PSC_SR_TXRDY 0x0400 +#define MPC52xx_PSC_SR_TXEMP 0x0800 +#define MPC52xx_PSC_SR_OE 0x1000 +#define MPC52xx_PSC_SR_PE 0x2000 +#define MPC52xx_PSC_SR_FE 0x4000 +#define MPC52xx_PSC_SR_RB 0x8000 + +/* PSC Command values */ +#define MPC52xx_PSC_RX_ENABLE 0x0001 +#define MPC52xx_PSC_RX_DISABLE 0x0002 +#define MPC52xx_PSC_TX_ENABLE 0x0004 +#define MPC52xx_PSC_TX_DISABLE 0x0008 +#define MPC52xx_PSC_SEL_MODE_REG_1 0x0010 +#define MPC52xx_PSC_RST_RX 0x0020 +#define MPC52xx_PSC_RST_TX 0x0030 +#define MPC52xx_PSC_RST_ERR_STAT 0x0040 +#define MPC52xx_PSC_RST_BRK_CHG_INT 0x0050 +#define MPC52xx_PSC_START_BRK 0x0060 +#define MPC52xx_PSC_STOP_BRK 0x0070 + +/* PSC TxRx FIFO status bits */ +#define MPC52xx_PSC_RXTX_FIFO_ERR 0x0040 +#define MPC52xx_PSC_RXTX_FIFO_UF 0x0020 +#define MPC52xx_PSC_RXTX_FIFO_OF 0x0010 +#define MPC52xx_PSC_RXTX_FIFO_FR 0x0008 +#define MPC52xx_PSC_RXTX_FIFO_FULL 0x0004 +#define MPC52xx_PSC_RXTX_FIFO_ALARM 0x0002 +#define MPC52xx_PSC_RXTX_FIFO_EMPTY 0x0001 + +/* PSC interrupt mask bits */ +#define MPC52xx_PSC_IMR_TXRDY 0x0100 +#define MPC52xx_PSC_IMR_RXRDY 0x0200 +#define MPC52xx_PSC_IMR_DB 0x0400 +#define MPC52xx_PSC_IMR_IPC 0x8000 + +/* PSC input port change bit */ +#define MPC52xx_PSC_CTS 0x01 +#define MPC52xx_PSC_DCD 0x02 +#define MPC52xx_PSC_D_CTS 0x10 +#define MPC52xx_PSC_D_DCD 0x20 + +/* PSC mode fields */ +#define MPC52xx_PSC_MODE_5_BITS 0x00 +#define MPC52xx_PSC_MODE_6_BITS 0x01 +#define MPC52xx_PSC_MODE_7_BITS 0x02 +#define MPC52xx_PSC_MODE_8_BITS 0x03 +#define MPC52xx_PSC_MODE_BITS_MASK 0x03 +#define MPC52xx_PSC_MODE_PAREVEN 0x00 +#define MPC52xx_PSC_MODE_PARODD 0x04 +#define MPC52xx_PSC_MODE_PARFORCE 0x08 +#define MPC52xx_PSC_MODE_PARNONE 0x10 +#define MPC52xx_PSC_MODE_ERR 0x20 +#define MPC52xx_PSC_MODE_FFULL 0x40 +#define MPC52xx_PSC_MODE_RXRTS 0x80 + +#define MPC52xx_PSC_MODE_ONE_STOP_5_BITS 0x00 +#define MPC52xx_PSC_MODE_ONE_STOP 0x07 +#define MPC52xx_PSC_MODE_TWO_STOP 0x0f + +#define MPC52xx_PSC_RFNUM_MASK 0x01ff + + +/* Structure of the hardware registers */ +struct mpc52xx_psc { + u8 mode; /* PSC + 0x00 */ + u8 reserved0[3]; + union { /* PSC + 0x04 */ + u16 status; + u16 clock_select; + } sr_csr; +#define mpc52xx_psc_status sr_csr.status +#define mpc52xx_psc_clock_select sr_csr.clock_select + u16 reserved1; + u8 command; /* PSC + 0x08 */ + u8 reserved2[3]; + union { /* PSC + 0x0c */ + u8 buffer_8; + u16 buffer_16; + u32 buffer_32; + } buffer; +#define mpc52xx_psc_buffer_8 buffer.buffer_8 +#define mpc52xx_psc_buffer_16 buffer.buffer_16 +#define mpc52xx_psc_buffer_32 buffer.buffer_32 + union { /* PSC + 0x10 */ + u8 ipcr; + u8 acr; + } ipcr_acr; +#define mpc52xx_psc_ipcr ipcr_acr.ipcr +#define mpc52xx_psc_acr ipcr_acr.acr + u8 reserved3[3]; + union { /* PSC + 0x14 */ + u16 isr; + u16 imr; + } isr_imr; +#define mpc52xx_psc_isr isr_imr.isr +#define mpc52xx_psc_imr isr_imr.imr + u16 reserved4; + u8 ctur; /* PSC + 0x18 */ + u8 reserved5[3]; + u8 ctlr; /* PSC + 0x1c */ + u8 reserved6[3]; + u16 ccr; /* PSC + 0x20 */ + u8 reserved7[14]; + u8 ivr; /* PSC + 0x30 */ + u8 reserved8[3]; + u8 ip; /* PSC + 0x34 */ + u8 reserved9[3]; + u8 op1; /* PSC + 0x38 */ + u8 reserved10[3]; + u8 op0; /* PSC + 0x3c */ + u8 reserved11[3]; + u32 sicr; /* PSC + 0x40 */ + u8 ircr1; /* PSC + 0x44 */ + u8 reserved13[3]; + u8 ircr2; /* PSC + 0x44 */ + u8 reserved14[3]; + u8 irsdr; /* PSC + 0x4c */ + u8 reserved15[3]; + u8 irmdr; /* PSC + 0x50 */ + u8 reserved16[3]; + u8 irfdr; /* PSC + 0x54 */ + u8 reserved17[3]; + u16 rfnum; /* PSC + 0x58 */ + u16 reserved18; + u16 tfnum; /* PSC + 0x5c */ + u16 reserved19; + u32 rfdata; /* PSC + 0x60 */ + u16 rfstat; /* PSC + 0x64 */ + u16 reserved20; + u8 rfcntl; /* PSC + 0x68 */ + u8 reserved21[5]; + u16 rfalarm; /* PSC + 0x6e */ + u16 reserved22; + u16 rfrptr; /* PSC + 0x72 */ + u16 reserved23; + u16 rfwptr; /* PSC + 0x76 */ + u16 reserved24; + u16 rflrfptr; /* PSC + 0x7a */ + u16 reserved25; + u16 rflwfptr; /* PSC + 0x7e */ + u32 tfdata; /* PSC + 0x80 */ + u16 tfstat; /* PSC + 0x84 */ + u16 reserved26; + u8 tfcntl; /* PSC + 0x88 */ + u8 reserved27[5]; + u16 tfalarm; /* PSC + 0x8e */ + u16 reserved28; + u16 tfrptr; /* PSC + 0x92 */ + u16 reserved29; + u16 tfwptr; /* PSC + 0x96 */ + u16 reserved30; + u16 tflrfptr; /* PSC + 0x9a */ + u16 reserved31; + u16 tflwfptr; /* PSC + 0x9e */ +}; + + +#endif /* __ASM_MPC52xx_PSC_H__ */ diff --git a/include/asm-powerpc/nvram.h b/include/asm-powerpc/nvram.h index f3563e11e260..9877982508bf 100644 --- a/include/asm-powerpc/nvram.h +++ b/include/asm-powerpc/nvram.h @@ -63,8 +63,10 @@ struct nvram_partition { }; -extern int nvram_write_error_log(char * buff, int length, unsigned int err_type); -extern int nvram_read_error_log(char * buff, int length, unsigned int * err_type); +extern int nvram_write_error_log(char * buff, int length, + unsigned int err_type, unsigned int err_seq); +extern int nvram_read_error_log(char * buff, int length, + unsigned int * err_type, unsigned int *err_seq); extern int nvram_clear_error_log(void); extern struct nvram_partition *nvram_find_partition(int sig, const char *name); diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h index 3448a3d4bc64..56a2df0f6836 100644 --- a/include/asm-powerpc/page_64.h +++ b/include/asm-powerpc/page_64.h @@ -28,7 +28,7 @@ /* Segment size */ #define SID_SHIFT 28 -#define SID_MASK 0xfffffffffUL +#define SID_MASK ASM_CONST(0xfffffffff) #define ESID_MASK 0xfffffffff0000000UL #define GET_ESID(x) (((x) >> SID_SHIFT) & SID_MASK) @@ -121,6 +121,7 @@ extern unsigned int get_slice_psize(struct mm_struct *mm, extern void slice_init_context(struct mm_struct *mm, unsigned int psize); extern void slice_set_user_psize(struct mm_struct *mm, unsigned int psize); +#define slice_mm_new_context(mm) ((mm)->context.id == 0) #define ARCH_HAS_HUGEPAGE_ONLY_RANGE extern int is_hugepage_only_range(struct mm_struct *m, @@ -130,6 +131,12 @@ extern int is_hugepage_only_range(struct mm_struct *m, #endif /* __ASSEMBLY__ */ #else #define slice_init() +#define slice_set_user_psize(mm, psize) \ +do { \ + (mm)->context.user_psize = (psize); \ + (mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \ +} while (0) +#define slice_mm_new_context(mm) 1 #endif /* CONFIG_PPC_MM_SLICES */ #ifdef CONFIG_HUGETLB_PAGE diff --git a/include/asm-powerpc/ppc_asm.h b/include/asm-powerpc/ppc_asm.h index 65325721446d..211fdaeeef84 100644 --- a/include/asm-powerpc/ppc_asm.h +++ b/include/asm-powerpc/ppc_asm.h @@ -155,6 +155,20 @@ name: \ .type GLUE(.,name),@function; \ GLUE(.,name): +#define _INIT_GLOBAL(name) \ + .section ".text.init.refok"; \ + .align 2 ; \ + .globl name; \ + .globl GLUE(.,name); \ + .section ".opd","aw"; \ +name: \ + .quad GLUE(.,name); \ + .quad .TOC.@tocbase; \ + .quad 0; \ + .previous; \ + .type GLUE(.,name),@function; \ +GLUE(.,name): + #define _KPROBE(name) \ .section ".kprobes.text","a"; \ .align 2 ; \ diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h index 672083787a1d..925e2d384bb3 100644 --- a/include/asm-powerpc/prom.h +++ b/include/asm-powerpc/prom.h @@ -24,7 +24,7 @@ #define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1 #define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1 -#define of_compat_cmp(s1, s2, l) strncasecmp((s1), (s2), (l)) +#define of_compat_cmp(s1, s2, l) strcasecmp((s1), (s2)) #define of_prop_cmp(s1, s2) strcmp((s1), (s2)) #define of_node_cmp(s1, s2) strcasecmp((s1), (s2)) @@ -145,7 +145,6 @@ extern void of_detach_node(struct device_node *); extern void finish_device_tree(void); extern void unflatten_device_tree(void); extern void early_init_devtree(void *); -#define device_is_compatible(d, c) of_device_is_compatible((d), (c)) extern int machine_is_compatible(const char *compat); extern void print_properties(struct device_node *node); extern int prom_n_intr_cells(struct device_node* np); diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h index d7f5ddfbaac7..fdc271ebe41c 100644 --- a/include/asm-powerpc/time.h +++ b/include/asm-powerpc/time.h @@ -174,7 +174,7 @@ static inline unsigned int get_dec(void) static inline void set_dec(int val) { #if defined(CONFIG_40x) - return; /* Have to let it auto-reload */ + mtspr(SPRN_PIT, val); #elif defined(CONFIG_8xx_CPU6) set_dec_cpu6(val); #else diff --git a/include/asm-ppc/prom.h b/include/asm-ppc/prom.h index 901f7fa8b2d7..71f4c996fe75 100644 --- a/include/asm-ppc/prom.h +++ b/include/asm-ppc/prom.h @@ -35,7 +35,6 @@ extern unsigned long sub_reloc_offset(unsigned long); #define machine_is_compatible(x) 0 #define of_find_compatible_node(f, t, c) NULL #define of_get_property(p, n, l) NULL -#define get_property(a, b, c) of_get_property((a), (b), (c)) #endif /* _PPC_PROM_H */ #endif /* __KERNEL__ */ diff --git a/include/linux/of.h b/include/linux/of.h index 47734ffd9745..6df80e985914 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -54,7 +54,6 @@ extern int of_device_is_compatible(const struct device_node *device, extern const void *of_get_property(const struct device_node *node, const char *name, int *lenp); -#define get_property(a, b, c) of_get_property((a), (b), (c)) extern int of_n_addr_cells(struct device_node *np); extern int of_n_size_cells(struct device_node *np); |