diff options
| -rw-r--r-- | drivers/media/radio/Kconfig | 32 | ||||
| -rw-r--r-- | sound/oss/Kconfig | 115 |
2 files changed, 0 insertions, 147 deletions
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 6d96b17a7f81..920b63f8cf05 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -173,38 +173,6 @@ config RADIO_MAESTRO To compile this driver as a module, choose M here: the module will be called radio-maestro. -config RADIO_MIROPCM20 - tristate "miroSOUND PCM20 radio" - depends on ISA && VIDEO_V4L1 && SOUND_ACI_MIXER - ---help--- - Choose Y here if you have this FM radio card. You also need to say Y - to "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20 radio)" (in "Sound") - for this to work. - - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. - - To compile this driver as a module, choose M here: the - module will be called miropcm20. - -config RADIO_MIROPCM20_RDS - tristate "miroSOUND PCM20 radio RDS user interface (EXPERIMENTAL)" - depends on RADIO_MIROPCM20 && EXPERIMENTAL - ---help--- - Choose Y here if you want to see RDS/RBDS information like - RadioText, Programme Service name, Clock Time and date, Programme - Type and Traffic Announcement/Programme identification. - - It's not possible to read the raw RDS packets from the device, so - the driver cant provide an V4L interface for this. But the - availability of RDS is reported over V4L by the basic driver - already. Here RDS can be read from files in /dev/v4l/rds. - - To compile this driver as a module, choose M here: the - module will be called miropcm20-rds. - config RADIO_SF16FMI tristate "SF16FMI Radio" depends on ISA && VIDEO_V4L2 diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig index cc2b9ab7f4e5..a0588c21324a 100644 --- a/sound/oss/Kconfig +++ b/sound/oss/Kconfig @@ -5,20 +5,6 @@ # # Prompt user for primary drivers. -config OSS_OBSOLETE_DRIVER - bool "Obsolete OSS drivers" - depends on SOUND_PRIME - help - This option enables support for obsolete OSS drivers that - are scheduled for removal in the near future since there - are ALSA drivers for the same hardware. - - Please contact Adrian Bunk <bunk@stusta.de> if you had to - say Y here because your soundcard is not properly supported - by ALSA. - - If unsure, say N. - config SOUND_BT878 tristate "BT878 audio dma" depends on SOUND_PRIME && PCI @@ -35,40 +21,6 @@ config SOUND_BT878 To compile this driver as a module, choose M here: the module will be called btaudio. -config SOUND_EMU10K1 - tristate "Creative SBLive! (EMU10K1)" - depends on SOUND_PRIME && PCI && OSS_OBSOLETE_DRIVER - ---help--- - Say Y or M if you have a PCI sound card using the EMU10K1 chipset, - such as the Creative SBLive!, SB PCI512 or Emu-APS. - - For more information on this driver and the degree of support for - the different card models please check: - - <http://sourceforge.net/projects/emu10k1/> - - It is now possible to load dsp microcode patches into the EMU10K1 - chip. These patches are used to implement real time sound - processing effects which include for example: signal routing, - bass/treble control, AC3 passthrough, ... - Userspace tools to create new patches and load/unload them can be - found in the emu-tools package at the above URL. - -config MIDI_EMU10K1 - bool "Creative SBLive! MIDI (EXPERIMENTAL)" - depends on SOUND_EMU10K1 && EXPERIMENTAL && ISA_DMA_API - help - Say Y if you want to be able to use the OSS /dev/sequencer - interface. This code is still experimental. - -config SOUND_FUSION - tristate "Crystal SoundFusion (CS4280/461x)" - depends on SOUND_PRIME && PCI && OSS_OBSOLETE_DRIVER - help - This module drives the Crystal SoundFusion devices (CS4280/46xx - series) when wired as native sound drivers with AC97 codecs. If - this driver does not work try the CS4232 driver. - config SOUND_BCM_CS4297A tristate "Crystal Sound CS4297a (for Swarm)" depends on SOUND_PRIME && SIBYTE_SWARM @@ -448,47 +400,6 @@ config SOUND_DMAP Say Y unless you have 16MB or more RAM or a PCI sound card. -config SOUND_AD1816 - tristate "AD1816(A) based cards (EXPERIMENTAL)" - depends on EXPERIMENTAL && SOUND_OSS && OSS_OBSOLETE_DRIVER - help - Say M here if you have a sound card based on the Analog Devices - AD1816(A) chip. - - If you compile the driver into the kernel, you have to add - "ad1816=<io>,<irq>,<dma>,<dma2>" to the kernel command line. - -config SOUND_AD1889 - tristate "AD1889 based cards (AD1819 codec) (EXPERIMENTAL)" - depends on EXPERIMENTAL && SOUND_OSS && PCI && OSS_OBSOLETE_DRIVER - help - Say M here if you have a sound card based on the Analog Devices - AD1889 chip. - -config SOUND_ADLIB - tristate "Adlib Cards" - depends on SOUND_OSS && OSS_OBSOLETE_DRIVER - help - Includes ASB 64 4D. Information on programming AdLib cards is - available at <http://www.itsnet.com/home/ldragon/Specs/adlib.html>. - -config SOUND_ACI_MIXER - tristate "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20)" - depends on SOUND_OSS && OSS_OBSOLETE_DRIVER - ---help--- - ACI (Audio Command Interface) is a protocol used to communicate with - the microcontroller on some sound cards produced by miro and - Cardinal Technologies. The main function of the ACI is to control - the mixer and to get a product identification. - - This VoxWare ACI driver currently supports the ACI functions on the - miroSOUND PCM1-pro, PCM12 and PCM20 radio. On the PCM20 radio, ACI - also controls the radio tuner. This is supported in the video4linux - miropcm20 driver (say M or Y here and go back to "Multimedia - devices" -> "Radio Adapters"). - - This driver is also available as a module and will be called aci. - config SOUND_CS4232 tristate "Crystal CS4232 based (PnP) cards" depends on SOUND_OSS @@ -594,18 +505,6 @@ config SOUND_MPU401 If you compile the driver into the kernel, you have to add "mpu401=<io>,<irq>" to the kernel command line. -config SOUND_NM256 - tristate "NM256AV/NM256ZX audio support" - depends on SOUND_OSS && OSS_OBSOLETE_DRIVER - help - Say M here to include audio support for the NeoMagic 256AV/256ZX - chipsets. These are the audio chipsets found in the Sony - Z505S/SX/DX, some Sony F-series, and the Dell Latitude CPi and CPt - laptops. It includes support for an AC97-compatible mixer and an - apparently proprietary sound engine. - - See <file:Documentation/sound/oss/NM256> for further information. - config SOUND_PAS tristate "ProAudioSpectrum 16 support" depends on SOUND_OSS @@ -714,20 +613,6 @@ config SOUND_YM3812 If unsure, say Y. -config SOUND_OPL3SA2 - tristate "Yamaha OPL3-SA2 and SA3 based PnP cards" - depends on SOUND_OSS && OSS_OBSOLETE_DRIVER - help - Say Y or M if you have a card based on one of these Yamaha sound - chipsets or the "SAx", which is actually a SA3. Read - <file:Documentation/sound/oss/OPL3-SA2> for more information on - configuring these cards. - - If you compile the driver into the kernel and do not also - configure in the optional ISA PnP support, you will have to add - "opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel - command line. - config SOUND_UART6850 tristate "6850 UART support" depends on SOUND_OSS |