aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/cpu-freq/governors.txt62
-rw-r--r--arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c3
-rw-r--r--arch/i386/kernel/cpu/cpufreq/powernow-k8.c50
-rw-r--r--arch/i386/kernel/cpu/cpufreq/powernow-k8.h9
-rw-r--r--arch/i386/kernel/cpu/cpufreq/speedstep-ich.c47
-rw-r--r--arch/i386/kernel/cpu/cpufreq/speedstep-lib.c32
-rw-r--r--arch/i386/kernel/cpu/cpufreq/speedstep-lib.h1
-rw-r--r--arch/i386/kernel/cpu/cpufreq/speedstep-smi.c1
-rw-r--r--arch/i386/kernel/cpu/proc.c6
-rw-r--r--arch/ia64/kernel/setup.c8
-rw-r--r--arch/mips/kernel/linux32.c4
-rw-r--r--arch/x86_64/kernel/setup.c6
-rw-r--r--drivers/char/ip2/i2pack.h2
-rw-r--r--drivers/cpufreq/cpufreq.c24
-rw-r--r--drivers/cpufreq/cpufreq_conservative.c10
-rw-r--r--drivers/cpufreq/cpufreq_ondemand.c10
-rw-r--r--fs/compat.c2
-rw-r--r--fs/read_write.c34
-rw-r--r--include/linux/cpufreq.h10
19 files changed, 249 insertions, 72 deletions
diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt
index 933fae74c337..f4b8dc4237e6 100644
--- a/Documentation/cpu-freq/governors.txt
+++ b/Documentation/cpu-freq/governors.txt
@@ -27,6 +27,7 @@ Contents:
2.2 Powersave
2.3 Userspace
2.4 Ondemand
+2.5 Conservative
3. The Governor Interface in the CPUfreq Core
@@ -110,9 +111,64 @@ directory.
The CPUfreq govenor "ondemand" sets the CPU depending on the
current usage. To do this the CPU must have the capability to
-switch the frequency very fast.
-
-
+switch the frequency very quickly. There are a number of sysfs file
+accessible parameters:
+
+sampling_rate: measured in uS (10^-6 seconds), this is how often you
+want the kernel to look at the CPU usage and to make decisions on
+what to do about the frequency. Typically this is set to values of
+around '10000' or more.
+
+show_sampling_rate_(min|max): the minimum and maximum sampling rates
+available that you may set 'sampling_rate' to.
+
+up_threshold: defines what the average CPU usaged between the samplings
+of 'sampling_rate' needs to be for the kernel to make a decision on
+whether it should increase the frequency. For example when it is set
+to its default value of '80' it means that between the checking
+intervals the CPU needs to be on average more than 80% in use to then
+decide that the CPU frequency needs to be increased.
+
+sampling_down_factor: this parameter controls the rate that the CPU
+makes a decision on when to decrease the frequency. When set to its
+default value of '5' it means that at 1/5 the sampling_rate the kernel
+makes a decision to lower the frequency. Five "lower rate" decisions
+have to be made in a row before the CPU frequency is actually lower.
+If set to '1' then the frequency decreases as quickly as it increases,
+if set to '2' it decreases at half the rate of the increase.
+
+ignore_nice_load: this parameter takes a value of '0' or '1', when set
+to '0' (its default) then all processes are counted towards towards the
+'cpu utilisation' value. When set to '1' then processes that are
+run with a 'nice' value will not count (and thus be ignored) in the
+overal usage calculation. This is useful if you are running a CPU
+intensive calculation on your laptop that you do not care how long it
+takes to complete as you can 'nice' it and prevent it from taking part
+in the deciding process of whether to increase your CPU frequency.
+
+
+2.5 Conservative
+----------------
+
+The CPUfreq governor "conservative", much like the "ondemand"
+governor, sets the CPU depending on the current usage. It differs in
+behaviour in that it gracefully increases and decreases the CPU speed
+rather than jumping to max speed the moment there is any load on the
+CPU. This behaviour more suitable in a battery powered environment.
+The governor is tweaked in the same manner as the "ondemand" governor
+through sysfs with the addition of:
+
+freq_step: this describes what percentage steps the cpu freq should be
+increased and decreased smoothly by. By default the cpu frequency will
+increase in 5% chunks of your maximum cpu frequency. You can change this
+value to anywhere between 0 and 100 where '0' will effectively lock your
+CPU at a speed regardless of its load whilst '100' will, in theory, make
+it behave identically to the "ondemand" governor.
+
+down_threshold: same as the 'up_threshold' found for the "ondemand"
+governor but for the opposite direction. For example when set to its
+default value of '20' it means that if the CPU usage needs to be below
+20% between samples to have the frequency decreased.
3. The Governor Interface in the CPUfreq Core
=============================================
diff --git a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
index 04a405345203..2b62dee35c6c 100644
--- a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
+++ b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
@@ -177,9 +177,10 @@ static unsigned int nforce2_fsb_read(int bootfsb)
*/
static int nforce2_set_fsb(unsigned int fsb)
{
- u32 pll, temp = 0;
+ u32 temp = 0;
unsigned int tfsb;
int diff;
+ int pll = 0;
if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) {
printk(KERN_ERR "cpufreq: FSB %d is out of range!\n", fsb);
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
index 68a1fc87f4ca..0fbbd4c1072e 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
@@ -45,7 +45,7 @@
#define PFX "powernow-k8: "
#define BFX PFX "BIOS error: "
-#define VERSION "version 1.50.4"
+#define VERSION "version 1.60.0"
#include "powernow-k8.h"
/* serialize freq changes */
@@ -216,10 +216,10 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid)
do {
wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
- if (i++ > 100) {
- printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
- return 1;
- }
+ if (i++ > 100) {
+ printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
+ return 1;
+ }
} while (query_current_values_with_pending_wait(data));
if (savefid != data->currfid) {
@@ -336,7 +336,7 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid
/* Phase 2 - core frequency transition */
static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
{
- u32 vcoreqfid, vcocurrfid, vcofiddiff, savevid = data->currvid;
+ u32 vcoreqfid, vcocurrfid, vcofiddiff, fid_interval, savevid = data->currvid;
if ((reqfid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
printk(KERN_ERR PFX "ph2: illegal lo-lo transition 0x%x 0x%x\n",
@@ -359,9 +359,11 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
: vcoreqfid - vcocurrfid;
while (vcofiddiff > 2) {
+ (data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2);
+
if (reqfid > data->currfid) {
if (data->currfid > LO_FID_TABLE_TOP) {
- if (write_new_fid(data, data->currfid + 2)) {
+ if (write_new_fid(data, data->currfid + fid_interval)) {
return 1;
}
} else {
@@ -371,7 +373,7 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
}
}
} else {
- if (write_new_fid(data, data->currfid - 2))
+ if (write_new_fid(data, data->currfid - fid_interval))
return 1;
}
@@ -464,7 +466,7 @@ static int check_supported_cpu(unsigned int cpu)
set_cpus_allowed(current, cpumask_of_cpu(cpu));
if (smp_processor_id() != cpu) {
- printk(KERN_ERR "limiting to cpu %u failed\n", cpu);
+ printk(KERN_ERR PFX "limiting to cpu %u failed\n", cpu);
goto out;
}
@@ -474,7 +476,7 @@ static int check_supported_cpu(unsigned int cpu)
eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
((eax & CPUID_XFAM) != CPUID_XFAM_K8) ||
- ((eax & CPUID_XMOD) > CPUID_XMOD_REV_F)) {
+ ((eax & CPUID_XMOD) > CPUID_XMOD_REV_G)) {
printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
goto out;
}
@@ -517,22 +519,24 @@ static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8
printk(KERN_ERR BFX "maxvid exceeded with pstate %d\n", j);
return -ENODEV;
}
- if ((pst[j].fid > MAX_FID)
- || (pst[j].fid & 1)
- || (j && (pst[j].fid < HI_FID_TABLE_BOTTOM))) {
+ if (pst[j].fid > MAX_FID) {
+ printk(KERN_ERR BFX "maxfid exceeded with pstate %d\n", j);
+ return -ENODEV;
+ }
+ if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) {
/* Only first fid is allowed to be in "low" range */
- printk(KERN_ERR PFX "two low fids - %d : 0x%x\n", j, pst[j].fid);
+ printk(KERN_ERR BFX "two low fids - %d : 0x%x\n", j, pst[j].fid);
return -EINVAL;
}
if (pst[j].fid < lastfid)
lastfid = pst[j].fid;
}
if (lastfid & 1) {
- printk(KERN_ERR PFX "lastfid invalid\n");
+ printk(KERN_ERR BFX "lastfid invalid\n");
return -EINVAL;
}
if (lastfid > LO_FID_TABLE_TOP)
- printk(KERN_INFO PFX "first fid not from lo freq table\n");
+ printk(KERN_INFO BFX "first fid not from lo freq table\n");
return 0;
}
@@ -631,7 +635,7 @@ static int find_psb_table(struct powernow_k8_data *data)
dprintk("table vers: 0x%x\n", psb->tableversion);
if (psb->tableversion != PSB_VERSION_1_4) {
- printk(KERN_INFO BFX "PSB table is not v1.4\n");
+ printk(KERN_ERR BFX "PSB table is not v1.4\n");
return -ENODEV;
}
@@ -689,7 +693,7 @@ static int find_psb_table(struct powernow_k8_data *data)
* BIOS and Kernel Developer's Guide, which is available on
* www.amd.com
*/
- printk(KERN_INFO PFX "BIOS error - no PSB or ACPI _PSS objects\n");
+ printk(KERN_ERR PFX "BIOS error - no PSB or ACPI _PSS objects\n");
return -ENODEV;
}
@@ -912,7 +916,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
set_cpus_allowed(current, cpumask_of_cpu(pol->cpu));
if (smp_processor_id() != pol->cpu) {
- printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu);
+ printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
goto err_out;
}
@@ -982,6 +986,9 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
cpumask_t oldmask = CPU_MASK_ALL;
int rc, i;
+ if (!cpu_online(pol->cpu))
+ return -ENODEV;
+
if (!check_supported_cpu(pol->cpu))
return -ENODEV;
@@ -1021,7 +1028,7 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
set_cpus_allowed(current, cpumask_of_cpu(pol->cpu));
if (smp_processor_id() != pol->cpu) {
- printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu);
+ printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
goto err_out;
}
@@ -1162,10 +1169,9 @@ static void __exit powernowk8_exit(void)
cpufreq_unregister_driver(&cpufreq_amd64_driver);
}
-MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com.");
+MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com>");
MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver.");
MODULE_LICENSE("GPL");
late_initcall(powernowk8_init);
module_exit(powernowk8_exit);
-
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
index b1e85bb36396..d0de37d58e9a 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
@@ -42,7 +42,7 @@ struct powernow_k8_data {
#define CPUID_XFAM 0x0ff00000 /* extended family */
#define CPUID_XFAM_K8 0
#define CPUID_XMOD 0x000f0000 /* extended model */
-#define CPUID_XMOD_REV_F 0x00040000
+#define CPUID_XMOD_REV_G 0x00060000
#define CPUID_USE_XFAM_XMOD 0x00000f00
#define CPUID_GET_MAX_CAPABILITIES 0x80000000
#define CPUID_FREQ_VOLT_CAPABILITIES 0x80000007
@@ -86,13 +86,14 @@ struct powernow_k8_data {
* low fid table
* - lowest entry in the high fid table must be a <= 200MHz + 2 * the entry
* in the low fid table
- * - the parts can only step at 200 MHz intervals, so 1.9 GHz is never valid
+ * - the parts can only step at <= 200 MHz intervals, odd fid values are
+ * supported in revision G and later revisions.
* - lowest frequency must be >= interprocessor hypertransport link speed
* (only applies to MP systems obviously)
*/
/* fids (frequency identifiers) are arranged in 2 tables - lo and hi */
-#define LO_FID_TABLE_TOP 6 /* fid values marking the boundary */
+#define LO_FID_TABLE_TOP 7 /* fid values marking the boundary */
#define HI_FID_TABLE_BOTTOM 8 /* between the low and high tables */
#define LO_VCOFREQ_TABLE_TOP 1400 /* corresponding vco frequency values */
@@ -106,7 +107,7 @@ struct powernow_k8_data {
#define MIN_FREQ 800 /* Min and max freqs, per spec */
#define MAX_FREQ 5000
-#define INVALID_FID_MASK 0xffffffc1 /* not a valid fid if these bits are set */
+#define INVALID_FID_MASK 0xffffffc0 /* not a valid fid if these bits are set */
#define INVALID_VID_MASK 0xffffffc0 /* not a valid vid if these bits are set */
#define VID_OFF 0x3f
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c
index 5b7d18a06afa..b425cd3d1838 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c
@@ -40,6 +40,7 @@ static struct pci_dev *speedstep_chipset_dev;
*/
static unsigned int speedstep_processor = 0;
+static u32 pmbase;
/*
* There are only two frequency states for each processor. Values
@@ -56,34 +57,47 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
/**
- * speedstep_set_state - set the SpeedStep state
- * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
+ * speedstep_find_register - read the PMBASE address
*
- * Tries to change the SpeedStep state.
+ * Returns: -ENODEV if no register could be found
*/
-static void speedstep_set_state (unsigned int state)
+static int speedstep_find_register (void)
{
- u32 pmbase;
- u8 pm2_blk;
- u8 value;
- unsigned long flags;
-
- if (!speedstep_chipset_dev || (state > 0x1))
- return;
+ if (!speedstep_chipset_dev)
+ return -ENODEV;
/* get PMBASE */
pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase);
if (!(pmbase & 0x01)) {
printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
- return;
+ return -ENODEV;
}
pmbase &= 0xFFFFFFFE;
if (!pmbase) {
printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
- return;
+ return -ENODEV;
}
+ dprintk("pmbase is 0x%x\n", pmbase);
+ return 0;
+}
+
+/**
+ * speedstep_set_state - set the SpeedStep state
+ * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
+ *
+ * Tries to change the SpeedStep state.
+ */
+static void speedstep_set_state (unsigned int state)
+{
+ u8 pm2_blk;
+ u8 value;
+ unsigned long flags;
+
+ if (state > 0x1)
+ return;
+
/* Disable IRQs */
local_irq_save(flags);
@@ -315,10 +329,11 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
cpus_allowed = current->cpus_allowed;
set_cpus_allowed(current, policy->cpus);
- /* detect low and high frequency */
+ /* detect low and high frequency and transition latency */
result = speedstep_get_freqs(speedstep_processor,
&speedstep_freqs[SPEEDSTEP_LOW].frequency,
&speedstep_freqs[SPEEDSTEP_HIGH].frequency,
+ &policy->cpuinfo.transition_latency,
&speedstep_set_state);
set_cpus_allowed(current, cpus_allowed);
if (result)
@@ -335,7 +350,6 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
/* cpuinfo and default policy values */
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
- policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
policy->cur = speed;
result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
@@ -400,6 +414,9 @@ static int __init speedstep_init(void)
return -EINVAL;
}
+ if (speedstep_find_register())
+ return -ENODEV;
+
return cpufreq_register_driver(&speedstep_driver);
}
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
index d368b3f5fce8..7c47005a1805 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
@@ -320,11 +320,13 @@ EXPORT_SYMBOL_GPL(speedstep_detect_processor);
unsigned int speedstep_get_freqs(unsigned int processor,
unsigned int *low_speed,
unsigned int *high_speed,
+ unsigned int *transition_latency,
void (*set_state) (unsigned int state))
{
unsigned int prev_speed;
unsigned int ret = 0;
unsigned long flags;
+ struct timeval tv1, tv2;
if ((!processor) || (!low_speed) || (!high_speed) || (!set_state))
return -EINVAL;
@@ -337,7 +339,7 @@ unsigned int speedstep_get_freqs(unsigned int processor,
return -EIO;
dprintk("previous speed is %u\n", prev_speed);
-
+
local_irq_save(flags);
/* switch to low state */
@@ -350,8 +352,17 @@ unsigned int speedstep_get_freqs(unsigned int processor,
dprintk("low speed is %u\n", *low_speed);
+ /* start latency measurement */
+ if (transition_latency)
+ do_gettimeofday(&tv1);
+
/* switch to high state */
set_state(SPEEDSTEP_HIGH);
+
+ /* end latency measurement */
+ if (transition_latency)
+ do_gettimeofday(&tv2);
+
*high_speed = speedstep_get_processor_frequency(processor);
if (!*high_speed) {
ret = -EIO;
@@ -369,6 +380,25 @@ unsigned int speedstep_get_freqs(unsigned int processor,
if (*high_speed != prev_speed)
set_state(SPEEDSTEP_LOW);
+ if (transition_latency) {
+ *transition_latency = (tv2.tv_sec - tv1.tv_sec) * USEC_PER_SEC +
+ tv2.tv_usec - tv1.tv_usec;
+ dprintk("transition latency is %u uSec\n", *transition_latency);
+
+ /* convert uSec to nSec and add 20% for safety reasons */
+ *transition_latency *= 1200;
+
+ /* check if the latency measurement is too high or too low
+ * and set it to a safe value (500uSec) in that case
+ */
+ if (*transition_latency > 10000000 || *transition_latency < 50000) {
+ printk (KERN_WARNING "speedstep: frequency transition measured seems out of "
+ "range (%u nSec), falling back to a safe one of %u nSec.\n",
+ *transition_latency, 500000);
+ *transition_latency = 500000;
+ }
+ }
+
out:
local_irq_restore(flags);
return (ret);
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h
index 261a2c9b7f6b..6a727fd3a77e 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h
@@ -44,4 +44,5 @@ extern unsigned int speedstep_get_processor_frequency(unsigned int processor);
extern unsigned int speedstep_get_freqs(unsigned int processor,
unsigned int *low_speed,
unsigned int *high_speed,
+ unsigned int *transition_latency,
void (*set_state) (unsigned int state));
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
index 2718fb6f6aba..28cc5d524afc 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
@@ -269,6 +269,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
result = speedstep_get_freqs(speedstep_processor,
&speedstep_freqs[SPEEDSTEP_LOW].frequency,
&speedstep_freqs[SPEEDSTEP_HIGH].frequency,
+ NULL,
&speedstep_set_state);
if (result) {
diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c
index e7921315ae9d..6d91b274589c 100644
--- a/arch/i386/kernel/cpu/proc.c
+++ b/arch/i386/kernel/cpu/proc.c
@@ -3,6 +3,7 @@
#include <linux/string.h>
#include <asm/semaphore.h>
#include <linux/seq_file.h>
+#include <linux/cpufreq.h>
/*
* Get CPU information for use by the procfs.
@@ -86,8 +87,11 @@ static int show_cpuinfo(struct seq_file *m, void *v)
seq_printf(m, "stepping\t: unknown\n");
if ( cpu_has(c, X86_FEATURE_TSC) ) {
+ unsigned int freq = cpufreq_quick_get(n);
+ if (!freq)
+ freq = cpu_khz;
seq_printf(m, "cpu MHz\t\t: %u.%03u\n",
- cpu_khz / 1000, (cpu_khz % 1000));
+ freq / 1000, (freq % 1000));
}
/* Cache size */
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 5add0bcf87a7..088e5dded8dc 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -43,6 +43,7 @@
#include <linux/initrd.h>
#include <linux/platform.h>
#include <linux/pm.h>
+#include <linux/cpufreq.h>
#include <asm/ia32.h>
#include <asm/machvec.h>
@@ -517,6 +518,7 @@ show_cpuinfo (struct seq_file *m, void *v)
char family[32], features[128], *cp, sep;
struct cpuinfo_ia64 *c = v;
unsigned long mask;
+ unsigned int proc_freq;
int i;
mask = c->features;
@@ -549,6 +551,10 @@ show_cpuinfo (struct seq_file *m, void *v)
sprintf(cp, " 0x%lx", mask);
}
+ proc_freq = cpufreq_quick_get(cpunum);
+ if (!proc_freq)
+ proc_freq = c->proc_freq / 1000;
+
seq_printf(m,
"processor : %d\n"
"vendor : %s\n"
@@ -565,7 +571,7 @@ show_cpuinfo (struct seq_file *m, void *v)
"BogoMIPS : %lu.%02lu\n",
cpunum, c->vendor, family, c->model, c->revision, c->archrev,
features, c->ppn, c->number,
- c->proc_freq / 1000000, c->proc_freq % 1000000,
+ proc_freq / 1000, proc_freq % 1000,
c->itc_freq / 1000000, c->itc_freq % 1000000,
lpj*HZ/500000, (lpj*HZ/5000) % 100);
#ifdef CONFIG_SMP
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 330cf84d21fe..60353f5acc48 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -420,7 +420,7 @@ asmlinkage ssize_t sys32_pread(unsigned int fd, char * buf,
goto out;
pos = merge_64(a4, a5);
ret = rw_verify_area(READ, file, &pos, count);
- if (ret)
+ if (ret < 0)
goto out;
ret = -EINVAL;
if (!file->f_op || !(read = file->f_op->read))
@@ -455,7 +455,7 @@ asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char * buf,
goto out;
pos = merge_64(a4, a5);
ret = rw_verify_area(WRITE, file, &pos, count);
- if (ret)
+ if (ret < 0)
goto out;
ret = -EINVAL;
if (!file->f_op || !(write = file->f_op->write))
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index 750e01dcbdf4..64c4534b930c 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -42,6 +42,7 @@
#include <linux/edd.h>
#include <linux/mmzone.h>
#include <linux/kexec.h>
+#include <linux/cpufreq.h>
#include <asm/mtrr.h>
#include <asm/uaccess.h>
@@ -1256,8 +1257,11 @@ static int show_cpuinfo(struct seq_file *m, void *v)
seq_printf(m, "stepping\t: unknown\n");
if (cpu_has(c,X86_FEATURE_TSC)) {
+ unsigned int freq = cpufreq_quick_get((unsigned)(c-cpu_data));
+ if (!freq)
+ freq = cpu_khz;
seq_printf(m, "cpu MHz\t\t: %u.%03u\n",
- cpu_khz / 1000, (cpu_khz % 1000));
+ freq / 1000, (freq % 1000));
}
/* Cache size */
diff --git a/drivers/char/ip2/i2pack.h b/drivers/char/ip2/i2pack.h
index e9b87a78622c..00342a677c90 100644
--- a/drivers/char/ip2/i2pack.h
+++ b/drivers/char/ip2/i2pack.h
@@ -358,7 +358,7 @@ typedef struct _failStat
#define MB_OUT_STRIPPED 0x40 // Board has read all output from fifo
#define MB_FATAL_ERROR 0x20 // Board has encountered a fatal error
-#pragma pack(4) // Reset padding to command-line default
+#pragma pack() // Reset padding to command-line default
#endif // I2PACK_H
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 815902c2c856..a9163d02983a 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -823,6 +823,30 @@ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq, unsigne
/**
+ * cpufreq_quick_get - get the CPU frequency (in kHz) frpm policy->cur
+ * @cpu: CPU number
+ *
+ * This is the last known freq, without actually getting it from the driver.
+ * Return value will be same as what is shown in scaling_cur_freq in sysfs.
+ */
+unsigned int cpufreq_quick_get(unsigned int cpu)
+{
+ struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+ unsigned int ret = 0;
+
+ if (policy) {
+ down(&policy->lock);
+ ret = policy->cur;
+ up(&policy->lock);
+ cpufreq_cpu_put(policy);
+ }
+
+ return (ret);
+}
+EXPORT_SYMBOL(cpufreq_quick_get);
+
+
+/**
* cpufreq_get - get the current CPU frequency (in kHz)
* @cpu: CPU number
*
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 2ed5c4363b53..39543a2bed0f 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -93,7 +93,7 @@ static inline unsigned int get_cpu_idle_time(unsigned int cpu)
{
return kstat_cpu(cpu).cpustat.idle +
kstat_cpu(cpu).cpustat.iowait +
- ( !dbs_tuners_ins.ignore_nice ?
+ ( dbs_tuners_ins.ignore_nice ?
kstat_cpu(cpu).cpustat.nice :
0);
}
@@ -127,7 +127,7 @@ show_one(sampling_rate, sampling_rate);
show_one(sampling_down_factor, sampling_down_factor);
show_one(up_threshold, up_threshold);
show_one(down_threshold, down_threshold);
-show_one(ignore_nice, ignore_nice);
+show_one(ignore_nice_load, ignore_nice);
show_one(freq_step, freq_step);
static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused,
@@ -207,7 +207,7 @@ static ssize_t store_down_threshold(struct cpufreq_policy *unused,
return count;
}
-static ssize_t store_ignore_nice(struct cpufreq_policy *policy,
+static ssize_t store_ignore_nice_load(struct cpufreq_policy *policy,
const char *buf, size_t count)
{
unsigned int input;
@@ -272,7 +272,7 @@ define_one_rw(sampling_rate);
define_one_rw(sampling_down_factor);
define_one_rw(up_threshold);
define_one_rw(down_threshold);
-define_one_rw(ignore_nice);
+define_one_rw(ignore_nice_load);
define_one_rw(freq_step);
static struct attribute * dbs_attributes[] = {
@@ -282,7 +282,7 @@ static struct attribute * dbs_attributes[] = {
&sampling_down_factor.attr,
&up_threshold.attr,
&down_threshold.attr,
- &ignore_nice.attr,
+ &ignore_nice_load.attr,
&freq_step.attr,
NULL
};
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 17741111246b..e69fd8dd1f1c 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -89,7 +89,7 @@ static inline unsigned int get_cpu_idle_time(unsigned int cpu)
{
return kstat_cpu(cpu).cpustat.idle +
kstat_cpu(cpu).cpustat.iowait +
- ( !dbs_tuners_ins.ignore_nice ?
+ ( dbs_tuners_ins.ignore_nice ?
kstat_cpu(cpu).cpustat.nice :
0);
}
@@ -122,7 +122,7 @@ static ssize_t show_##file_name \
show_one(sampling_rate, sampling_rate);
show_one(sampling_down_factor, sampling_down_factor);
show_one(up_threshold, up_threshold);
-show_one(ignore_nice, ignore_nice);
+show_one(ignore_nice_load, ignore_nice);
static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused,
const char *buf, size_t count)
@@ -182,7 +182,7 @@ static ssize_t store_up_threshold(struct cpufreq_policy *unused,
return count;
}
-static ssize_t store_ignore_nice(struct cpufreq_policy *policy,
+static ssize_t store_ignore_nice_load(struct cpufreq_policy *policy,
const char *buf, size_t count)
{
unsigned int input;
@@ -223,7 +223,7 @@ __ATTR(_name, 0644, show_##_name, store_##_name)
define_one_rw(sampling_rate);
define_one_rw(sampling_down_factor);
define_one_rw(up_threshold);
-define_one_rw(ignore_nice);
+define_one_rw(ignore_nice_load);
static struct attribute * dbs_attributes[] = {
&sampling_rate_max.attr,
@@ -231,7 +231,7 @@ static struct attribute * dbs_attributes[] = {
&sampling_rate.attr,
&sampling_down_factor.attr,
&up_threshold.attr,
- &ignore_nice.attr,
+ &ignore_nice_load.attr,
NULL
};
diff --git a/fs/compat.c b/fs/compat.c
index 818634120b69..55ac0324aaf1 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1170,7 +1170,7 @@ static ssize_t compat_do_readv_writev(int type, struct file *file,
}
ret = rw_verify_area(type, file, pos, tot_len);
- if (ret)
+ if (ret < 0)
goto out;
fnv = NULL;
diff --git a/fs/read_write.c b/fs/read_write.c
index a091ee4f430d..df3468a22fea 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -14,6 +14,7 @@
#include <linux/security.h>
#include <linux/module.h>
#include <linux/syscalls.h>
+#include <linux/pagemap.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
@@ -182,22 +183,33 @@ bad:
}
#endif
+/*
+ * rw_verify_area doesn't like huge counts. We limit
+ * them to something that fits in "int" so that others
+ * won't have to do range checks all the time.
+ */
+#define MAX_RW_COUNT (INT_MAX & PAGE_CACHE_MASK)
int rw_verify_area(int read_write, struct file *file, loff_t *ppos, size_t count)
{
struct inode *inode;
loff_t pos;
- if (unlikely(count > INT_MAX))
+ if (unlikely((ssize_t) count < 0))
goto Einval;
pos = *ppos;
if (unlikely((pos < 0) || (loff_t) (pos + count) < 0))
goto Einval;
inode = file->f_dentry->d_inode;
- if (inode->i_flock && MANDATORY_LOCK(inode))
- return locks_mandatory_area(read_write == READ ? FLOCK_VERIFY_READ : FLOCK_VERIFY_WRITE, inode, file, pos, count);
- return 0;
+ if (inode->i_flock && MANDATORY_LOCK(inode)) {
+ int retval = locks_mandatory_area(
+ read_write == READ ? FLOCK_VERIFY_READ : FLOCK_VERIFY_WRITE,
+ inode, file, pos, count);
+ if (retval < 0)
+ return retval;
+ }
+ return count > MAX_RW_COUNT ? MAX_RW_COUNT : count;
Einval:
return -EINVAL;
@@ -244,7 +256,8 @@ ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos)
return -EFAULT;
ret = rw_verify_area(READ, file, pos, count);
- if (!ret) {
+ if (ret >= 0) {
+ count = ret;
ret = security_file_permission (file, MAY_READ);
if (!ret) {
if (file->f_op->read)
@@ -295,7 +308,8 @@ ssize_t vfs_write(struct file *file, const char __user *buf, size_t count, loff_
return -EFAULT;
ret = rw_verify_area(WRITE, file, pos, count);
- if (!ret) {
+ if (ret >= 0) {
+ count = ret;
ret = security_file_permission (file, MAY_WRITE);
if (!ret) {
if (file->f_op->write)
@@ -497,7 +511,7 @@ static ssize_t do_readv_writev(int type, struct file *file,
}
ret = rw_verify_area(type, file, pos, tot_len);
- if (ret)
+ if (ret < 0)
goto out;
ret = security_file_permission(file, type == READ ? MAY_READ : MAY_WRITE);
if (ret)
@@ -653,8 +667,9 @@ static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos,
if (!(in_file->f_mode & FMODE_PREAD))
goto fput_in;
retval = rw_verify_area(READ, in_file, ppos, count);
- if (retval)
+ if (retval < 0)
goto fput_in;
+ count = retval;
retval = security_file_permission (in_file, MAY_READ);
if (retval)
@@ -674,8 +689,9 @@ static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos,
goto fput_out;
out_inode = out_file->f_dentry->d_inode;
retval = rw_verify_area(WRITE, out_file, &out_file->f_pos, count);
- if (retval)
+ if (retval < 0)
goto fput_out;
+ count = retval;
retval = security_file_permission (out_file, MAY_WRITE);
if (retval)
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index d068176b7ad7..c31650df9241 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -256,6 +256,16 @@ int cpufreq_update_policy(unsigned int cpu);
/* query the current CPU frequency (in kHz). If zero, cpufreq couldn't detect it */
unsigned int cpufreq_get(unsigned int cpu);
+/* query the last known CPU freq (in kHz). If zero, cpufreq couldn't detect it */
+#ifdef CONFIG_CPU_FREQ
+unsigned int cpufreq_quick_get(unsigned int cpu);
+#else
+static inline unsigned int cpufreq_quick_get(unsigned int cpu)
+{
+ return 0;
+}
+#endif
+
/*********************************************************************
* CPUFREQ DEFAULT GOVERNOR *
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.