diff options
129 files changed, 11582 insertions, 4345 deletions
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt index cf1333d1dd52..21641236c095 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys.txt +++ b/Documentation/devicetree/bindings/input/gpio-keys.txt @@ -6,6 +6,7 @@ Required properties: Optional properties: - autorepeat: Boolean, Enable auto repeat feature of Linux input subsystem. + - label: String, name of the input device. Each button (key) is represented as a sub-node of "gpio-keys": Subnode properties: diff --git a/MAINTAINERS b/MAINTAINERS index b8a717c4f863..fc1718500181 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10453,9 +10453,11 @@ S: Maintained F: drivers/net/ethernet/dlink/sundance.c SUPERH +M: Yoshinori Sato <ysato@users.sourceforge.jp> +M: Rich Felker <dalias@libc.org> L: linux-sh@vger.kernel.org Q: http://patchwork.kernel.org/project/linux-sh/list/ -S: Orphan +S: Maintained F: Documentation/sh/ F: arch/sh/ F: drivers/sh/ diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 5c0e5cc8ed10..c6b6175d0203 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -153,10 +153,9 @@ choice mobile SoCs in the Kona family of chips (e.g. bcm28155, bcm11351, etc...) - config DEBUG_BCM63XX + config DEBUG_BCM63XX_UART bool "Kernel low-level debugging on BCM63XX UART" depends on ARCH_BCM_63XX - select DEBUG_UART_BCM63XX config DEBUG_BERLIN_UART bool "Marvell Berlin SoC Debug UART" @@ -1414,7 +1413,7 @@ config DEBUG_LL_INCLUDE default "debug/vf.S" if DEBUG_VF_UART default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 - default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX + default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0 default "mach/debug-macro.S" @@ -1428,10 +1427,6 @@ config DEBUG_UART_8250 ARCH_IOP13XX || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || \ ARCH_RPC -# Compatibility options for BCM63xx -config DEBUG_UART_BCM63XX - def_bool ARCH_BCM_63XX - config DEBUG_UART_PHYS hex "Physical base address of debug UART" default 0x00100a00 if DEBUG_NETX_UART @@ -1529,7 +1524,7 @@ config DEBUG_UART_PHYS default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 - default 0xfffe8600 if DEBUG_UART_BCM63XX + default 0xfffe8600 if DEBUG_BCM63XX_UART default 0xfffff700 if ARCH_IOP33X depends on ARCH_EP93XX || \ DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ @@ -1542,7 +1537,7 @@ config DEBUG_UART_PHYS DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ DEBUG_S3C64XX_UART || \ - DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \ + DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ DEBUG_AT91_UART @@ -1588,7 +1583,7 @@ config DEBUG_UART_VIRT default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT default 0xfc40ab00 if DEBUG_BRCMSTB_UART default 0xfc705000 if DEBUG_ZTE_ZX - default 0xfcfe8600 if DEBUG_UART_BCM63XX + default 0xfcfe8600 if DEBUG_BCM63XX_UART default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX default 0xfd012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_MV78XX0 default 0xfd883000 if DEBUG_ALPINE_UART0 @@ -1638,7 +1633,7 @@ config DEBUG_UART_VIRT DEBUG_NETX_UART || \ DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ DEBUG_S3C64XX_UART || \ - DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \ + DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 config DEBUG_UART_8250_SHIFT diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 78a21f2828df..c548cabb102f 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -180,7 +180,7 @@ }; &extal1_clk { - clock-frequency = <25000000>; + clock-frequency = <24000000>; }; &extal2_clk { clock-frequency = <48000000>; diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index 8be6632407d8..dae8d86ef4cc 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -4,10 +4,9 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ -I$(srctree)/arch/arm/plat-versatile/include - +obj-y := core.o obj-$(CONFIG_REALVIEW_DT) += realview-dt.o obj-$(CONFIG_SMP) += platsmp-dt.o -obj-y := core.o ifdef CONFIG_ATAGS obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index a90f3556017f..0fa8b84ed657 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -13,57 +13,5 @@ menuconfig ARCH_TEGRA select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER select SOC_BUS - select USB_ULPI if USB_PHY - select USB_ULPI_VIEWPORT if USB_PHY help This enables support for NVIDIA Tegra based systems. - -if ARCH_TEGRA - -config ARCH_TEGRA_2x_SOC - bool "Enable support for Tegra20 family" - select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP - select ARM_ERRATA_720789 - select ARM_ERRATA_754327 if SMP - select ARM_ERRATA_764369 if SMP - select PINCTRL_TEGRA20 - select PL310_ERRATA_727915 if CACHE_L2X0 - select PL310_ERRATA_769419 if CACHE_L2X0 - select TEGRA_TIMER - help - Support for NVIDIA Tegra AP20 and T20 processors, based on the - ARM CortexA9MP CPU and the ARM PL310 L2 cache controller - -config ARCH_TEGRA_3x_SOC - bool "Enable support for Tegra30 family" - select ARM_ERRATA_754322 - select ARM_ERRATA_764369 if SMP - select PINCTRL_TEGRA30 - select PL310_ERRATA_769419 if CACHE_L2X0 - select TEGRA_TIMER - help - Support for NVIDIA Tegra T30 processor family, based on the - ARM CortexA9MP CPU and the ARM PL310 L2 cache controller - -config ARCH_TEGRA_114_SOC - bool "Enable support for Tegra114 family" - select ARM_ERRATA_798181 if SMP - select ARM_L1_CACHE_SHIFT_6 - select HAVE_ARM_ARCH_TIMER - select PINCTRL_TEGRA114 - select TEGRA_TIMER - help - Support for NVIDIA Tegra T114 processor family, based on the - ARM CortexA15MP CPU - -config ARCH_TEGRA_124_SOC - bool "Enable support for Tegra124 family" - select ARM_L1_CACHE_SHIFT_6 - select HAVE_ARM_ARCH_TIMER - select PINCTRL_TEGRA124 - select TEGRA_TIMER - help - Support for NVIDIA Tegra T124 processor family, based on the - ARM CortexA15MP CPU - -endif diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S index e6b684e14322..f5d19667484e 100644 --- a/arch/arm/mach-tegra/sleep-tegra20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -231,8 +231,11 @@ ENDPROC(tegra20_cpu_is_resettable_soon) * tegra20_tear_down_core in IRAM */ ENTRY(tegra20_sleep_core_finish) + mov r4, r0 /* Flush, disable the L1 data cache and exit SMP */ + mov r0, #TEGRA_FLUSH_CACHE_ALL bl tegra_disable_clean_inv_dcache + mov r0, r4 mov32 r3, tegra_shut_off_mmu add r3, r3, r0 diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 9a2f0b051e10..16e5ff03383c 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -242,8 +242,11 @@ ENDPROC(tegra30_cpu_shutdown) * tegra30_tear_down_core in IRAM */ ENTRY(tegra30_sleep_core_finish) + mov r4, r0 /* Flush, disable the L1 data cache and exit SMP */ + mov r0, #TEGRA_FLUSH_CACHE_ALL bl tegra_disable_clean_inv_dcache + mov r0, r4 /* * Preload all the address literals that are needed for the diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 534a60ae282e..0eca3812527e 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1200,10 +1200,7 @@ error: while (i--) if (pages[i]) __free_pages(pages[i], 0); - if (array_size <= PAGE_SIZE) - kfree(pages); - else - vfree(pages); + kvfree(pages); return NULL; } @@ -1211,7 +1208,6 @@ static int __iommu_free_buffer(struct device *dev, struct page **pages, size_t size, struct dma_attrs *attrs) { int count = size >> PAGE_SHIFT; - int array_size = count * sizeof(struct page *); int i; if (dma_get_attr(DMA_ATTR_FORCE_CONTIGUOUS, attrs)) { @@ -1222,10 +1218,7 @@ static int __iommu_free_buffer(struct device *dev, struct page **pages, __free_pages(pages[i], 0); } - if (array_size <= PAGE_SIZE) - kfree(pages); - else - vfree(pages); + kvfree(pages); return 0; } diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 2c400412b3bc..21074f674bde 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -105,18 +105,6 @@ config ARCH_TEGRA help This enables support for the NVIDIA Tegra SoC family. -config ARCH_TEGRA_132_SOC - bool "NVIDIA Tegra132 SoC" - depends on ARCH_TEGRA - select PINCTRL_TEGRA124 - select USB_ULPI if USB_PHY - select USB_ULPI_VIEWPORT if USB_PHY - help - Enable support for NVIDIA Tegra132 SoC, based on the Denver - ARMv8 CPU. The Tegra132 SoC is similar to the Tegra124 SoC, - but contains an NVIDIA Denver CPU complex in place of - Tegra124's "4+1" Cortex-A15 CPU complex. - config ARCH_SPRD bool "Spreadtrum SoC platform" help diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 76e7510835b2..f832b8a7453a 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -9,6 +9,7 @@ dts-dirs += freescale dts-dirs += hisilicon dts-dirs += marvell dts-dirs += mediatek +dts-dirs += nvidia dts-dirs += qcom dts-dirs += renesas dts-dirs += rockchip diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile new file mode 100644 index 000000000000..a7e865da1005 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -0,0 +1,7 @@ +dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb +dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb +dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb +dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb + +always := $(dtb-y) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts new file mode 100644 index 000000000000..7dfe1c085966 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -0,0 +1,1130 @@ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra132.dtsi" + +/ { + model = "NVIDIA Tegra132 Norrin"; + compatible = "nvidia,norrin", "nvidia,tegra132", "nvidia,tegra124"; + + aliases { + rtc0 = "/i2c@0,7000d000/as3722@40"; + rtc1 = "/rtc@0,7000e000"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + host1x@0,50000000 { + hdmi@0,54280000 { + status = "disabled"; + + vdd-supply = <&vdd_3v3_hdmi>; + pll-supply = <&vdd_hdmi_pll>; + hdmi-supply = <&vdd_5v0_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + + sor@0,54540000 { + status = "okay"; + + nvidia,dpaux = <&dpaux>; + nvidia,panel = <&panel>; + }; + + dpaux: dpaux@0,545c0000 { + vdd-supply = <&vdd_3v3_panel>; + status = "okay"; + }; + }; + + gpu@0,57000000 { + status = "okay"; + + vdd-supply = <&vdd_gpu>; + }; + + pinmux@0,70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_default>; + + pinmux_default: pinmux@0 { + dap_mclk1_pw4 { + nvidia,pins = "dap_mclk1_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5", + "dap2_fs_pa2", + "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_dout_pp2 { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0", + "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_nxt_py2", + "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pj7 { + nvidia,pins = "pj7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk7 { + nvidia,pins = "pk7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg4 { + nvidia,pins = "pg4", + "pg5", + "pg6", + "pi3"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg7 { + nvidia,pins = "pg7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ph1 { + nvidia,pins = "ph1"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk0 { + nvidia,pins = "pk0", + "kb_row15_ps7", + "clk_32k_out_pa0"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "kb_col4_pq4", + "sdmmc3_clk_lb_out_pee4", + "sdmmc3_clk_lb_in_pee5", + "sdmmc3_cd_n_pv2"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + mic_det_l { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "rtck"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col0_ap { + nvidia,pins = "kb_col0_pq0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + en_vdd_sd { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lid_open { + nvidia,pins = "kb_row4_pr4"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4", + "usb_vbus_en1_pn5", + "usb_vbus_en2_pff1"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + drive_sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <36>; + nvidia,pull-up-strength = <20>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>; + }; + drive_sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <22>; + nvidia,pull-up-strength = <36>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + }; + drive_gma { + nvidia,pins = "drive_gma"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <2>; + nvidia,pull-up-strength = <1>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,drive-type = <1>; + }; + ac_ok { + nvidia,pins = "pj0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + codec_irq_l { + nvidia,pins = "ph4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_bl_en { + nvidia,pins = "ph2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + touch_irq_l { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + tpm_davint_l { + nvidia,pins = "ph6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ts_irq_l { + nvidia,pins = "pk2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ts_reset_l { + nvidia,pins = "pk4"; + nvidia,function = "gmi"; + nvidia,pull = <1>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ts_shdn_l { + nvidia,pins = "pk1"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph7 { + nvidia,pins = "ph7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sensor_irq_l { + nvidia,pins = "pi6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + wifi_en { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + chromeos_write_protect { + nvidia,pins = "kb_row1_pr1"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + hp_det_l { + nvidia,pins = "pi7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + soc_warm_reset_l { + nvidia,pins = "pi5"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + }; + }; + + serial@0,70006000 { + status = "okay"; + }; + + pwm: pwm@0,7000a000 { + status = "okay"; + }; + + /* HDMI DDC */ + hdmi_ddc: i2c@0,7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@0,7000d000 { + status = "okay"; + clock-frequency = <400000>; + + as3722: pmic@40 { + compatible = "ams,as3722"; + reg = <0x40>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + + ams,system-power-controller; + + #interrupt-cells = <2>; + interrupt-controller; + + #gpio-cells = <2>; + gpio-controller; + + pinctrl-names = "default"; + pinctrl-0 = <&as3722_default>; + + as3722_default: pinmux@0 { + gpio0 { + pins = "gpio0"; + function = "gpio"; + bias-pull-down; + }; + + gpio1 { + pins = "gpio1"; + function = "gpio"; + bias-pull-up; + }; + + gpio2_4_7 { + pins = "gpio2", "gpio4", "gpio7"; + function = "gpio"; + bias-pull-up; + }; + + gpio3 { + pins = "gpio3"; + function = "gpio"; + bias-high-impedance; + }; + + gpio5 { + pins = "gpio5"; + function = "clk32k-out"; + bias-pull-down; + }; + + gpio6 { + pins = "gpio6"; + function = "clk32k-out"; + bias-pull-down; + }; + }; + + regulators { + vsup-sd2-supply = <&vdd_5v0_sys>; + vsup-sd3-supply = <&vdd_5v0_sys>; + vsup-sd4-supply = <&vdd_5v0_sys>; + vsup-sd5-supply = <&vdd_5v0_sys>; + vin-ldo0-supply = <&vdd_1v35_lp0>; + vin-ldo1-6-supply = <&vdd_3v3_sys>; + vin-ldo2-5-7-supply = <&vddio_1v8>; + vin-ldo3-4-supply = <&vdd_3v3_sys>; + vin-ldo9-10-supply = <&vdd_5v0_sys>; + vin-ldo11-supply = <&vdd_3v3_run>; + + sd0 { + regulator-name = "+VDD_CPU_AP"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-max-microamp = <3500000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <2>; + }; + + sd1 { + regulator-name = "+VDD_CORE"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-max-microamp = <4000000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <1>; + }; + + vdd_1v35_lp0: sd2 { + regulator-name = "+1.35V_LP0(sd2)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + sd3 { + regulator-name = "+1.35V_LP0(sd3)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v05_run: sd4 { + regulator-name = "+1.05V_RUN"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + vddio_1v8: sd5 { + regulator-name = "+1.8V_VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_gpu: sd6 { + regulator-name = "+VDD_GPU_AP"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo0 { + regulator-name = "+1.05_RUN_AVDD"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <1>; + }; + + ldo1 { + regulator-name = "+1.8V_RUN_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2 { + regulator-name = "+1.2V_GEN_AVDD"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3 { + regulator-name = "+1.00V_LP0_VDD_RTC"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + ams,enable-tracking; + }; + + vdd_run_cam: ldo4 { + regulator-name = "+2.8V_RUN_CAM"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo5 { + regulator-name = "+1.2V_RUN_CAM_FRONT"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vddio_sdmmc3: ldo6 { + regulator-name = "+VDDIO_SDMMC3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-name = "+1.05V_RUN_CAM_REAR"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo9 { + regulator-name = "+2.8V_RUN_TOUCH"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo10 { + regulator-name = "+2.8V_RUN_CAM_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo11 { + regulator-name = "+1.8V_RUN_VPP_FUSE"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + }; + + spi@0,7000d400 { + status = "okay"; + + ec: cros-ec@0 { + compatible = "google,cros-ec-spi"; + spi-max-frequency = <3000000>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>; + reg = <0>; + + google,cros-ec-spi-msg-delay = <2000>; + + i2c_20: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + #address-cells = <1>; + #size-cells = <0>; + + google,remote-bus = <0>; + + charger: bq24735 { + compatible = "ti,bq24735"; + reg = <0x9>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(J, 0) + GPIO_ACTIVE_HIGH>; + ti,ac-detect-gpios = <&gpio + TEGRA_GPIO(J, 0) + GPIO_ACTIVE_HIGH>; + }; + + battery: smart-battery { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + battery-name = "battery"; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <10>; + /* power-supplies = <&charger>; */ + }; + }; + + keyboard-controller { + compatible = "google,cros-ec-keyb"; + keypad,num-rows = <8>; + keypad,num-columns = <13>; + google,needs-ghost-filter; + linux,keymap = + <MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA) + MATRIX_KEY(0x00, 0x02, KEY_F1) + MATRIX_KEY(0x00, 0x03, KEY_B) + MATRIX_KEY(0x00, 0x04, KEY_F10) + MATRIX_KEY(0x00, 0x06, KEY_N) + MATRIX_KEY(0x00, 0x08, KEY_EQUAL) + MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT) + + MATRIX_KEY(0x01, 0x01, KEY_ESC) + MATRIX_KEY(0x01, 0x02, KEY_F4) + MATRIX_KEY(0x01, 0x03, KEY_G) + MATRIX_KEY(0x01, 0x04, KEY_F7) + MATRIX_KEY(0x01, 0x06, KEY_H) + MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE) + MATRIX_KEY(0x01, 0x09, KEY_F9) + MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE) + + MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL) + MATRIX_KEY(0x02, 0x01, KEY_TAB) + MATRIX_KEY(0x02, 0x02, KEY_F3) + MATRIX_KEY(0x02, 0x03, KEY_T) + MATRIX_KEY(0x02, 0x04, KEY_F6) + MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE) + MATRIX_KEY(0x02, 0x06, KEY_Y) + MATRIX_KEY(0x02, 0x07, KEY_102ND) + MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE) + MATRIX_KEY(0x02, 0x09, KEY_F8) + + MATRIX_KEY(0x03, 0x01, KEY_GRAVE) + MATRIX_KEY(0x03, 0x02, KEY_F2) + MATRIX_KEY(0x03, 0x03, KEY_5) + MATRIX_KEY(0x03, 0x04, KEY_F5) + MATRIX_KEY(0x03, 0x06, KEY_6) + MATRIX_KEY(0x03, 0x08, KEY_MINUS) + MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH) + + MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL) + MATRIX_KEY(0x04, 0x01, KEY_A) + MATRIX_KEY(0x04, 0x02, KEY_D) + MATRIX_KEY(0x04, 0x03, KEY_F) + MATRIX_KEY(0x04, 0x04, KEY_S) + MATRIX_KEY(0x04, 0x05, KEY_K) + MATRIX_KEY(0x04, 0x06, KEY_J) + MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON) + MATRIX_KEY(0x04, 0x09, KEY_L) + MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH) + MATRIX_KEY(0x04, 0x0b, KEY_ENTER) + + MATRIX_KEY(0x05, 0x01, KEY_Z) + MATRIX_KEY(0x05, 0x02, KEY_C) + MATRIX_KEY(0x05, 0x03, KEY_V) + MATRIX_KEY(0x05, 0x04, KEY_X) + MATRIX_KEY(0x05, 0x05, KEY_COMMA) + MATRIX_KEY(0x05, 0x06, KEY_M) + MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT) + MATRIX_KEY(0x05, 0x08, KEY_SLASH) + MATRIX_KEY(0x05, 0x09, KEY_DOT) + MATRIX_KEY(0x05, 0x0b, KEY_SPACE) + + MATRIX_KEY(0x06, 0x01, KEY_1) + MATRIX_KEY(0x06, 0x02, KEY_3) + MATRIX_KEY(0x06, 0x03, KEY_4) + MATRIX_KEY(0x06, 0x04, KEY_2) + MATRIX_KEY(0x06, 0x05, KEY_8) + MATRIX_KEY(0x06, 0x06, KEY_7) + MATRIX_KEY(0x06, 0x08, KEY_0) + MATRIX_KEY(0x06, 0x09, KEY_9) + MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT) + MATRIX_KEY(0x06, 0x0b, KEY_DOWN) + MATRIX_KEY(0x06, 0x0c, KEY_RIGHT) + + MATRIX_KEY(0x07, 0x01, KEY_Q) + MATRIX_KEY(0x07, 0x02, KEY_E) + MATRIX_KEY(0x07, 0x03, KEY_R) + MATRIX_KEY(0x07, 0x04, KEY_W) + MATRIX_KEY(0x07, 0x05, KEY_I) + MATRIX_KEY(0x07, 0x06, KEY_U) + MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT) + MATRIX_KEY(0x07, 0x08, KEY_P) + MATRIX_KEY(0x07, 0x09, KEY_O) + MATRIX_KEY(0x07, 0x0b, KEY_UP) + MATRIX_KEY(0x07, 0x0c, KEY_LEFT)>; + }; + }; + }; + + pmc@0,7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + #wake-cells = <3>; + nvidia,cpu-pwr-good-time = <500>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <641 3845>; + nvidia,core-pwr-off-time = <61036>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + nvidia,reset-gpio = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + }; + + /* WIFI/BT module */ + sdhci@0,700b0000 { + status = "disabled"; + }; + + /* external SD/MMC */ + sdhci@0,700b0400 { + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>; + status = "okay"; + bus-width = <4>; + vqmmc-supply = <&vddio_sdmmc3>; + }; + + /* EMMC 4.51 */ + sdhci@0,700b0600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + usb@0,7d000000 { + status = "okay"; + }; + + usb-phy@0,7d000000 { + status = "okay"; + vbus-supply = <&vdd_usb1_vbus>; + }; + + usb@0,7d004000 { + status = "okay"; + }; + + usb-phy@0,7d004000 { + status = "okay"; + vbus-supply = <&vdd_run_cam>; + }; + + usb@0,7d008000 { + status = "okay"; + }; + + usb-phy@0,7d008000 { + status = "okay"; + vbus-supply = <&vdd_usb3_vbus>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_led>; + pwms = <&pwm 1 1000000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + + backlight-boot-off; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + lid { + label = "Lid"; + gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>; + linux,input-type = <5>; + linux,code = <0>; + debounce-interval = <1>; + gpio-key,wakeup; + }; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + panel: panel { + compatible = "innolux,n116bge", "simple-panel"; + backlight = <&backlight>; + ddc-i2c-bus = <&dpaux>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_mux: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "+VDD_MUX"; + regulator-min-microvolt = <19000000>; + regulator-max-microvolt = <19000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "+5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_sys: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "+3.3V_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_run: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "+3.3V_RUN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&as3722 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_3v3_hdmi: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_run>; + }; + + vdd_led: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "+VDD_LED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_mux>; + }; + + vdd_usb1_vbus: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "+5V_USB_HS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb3_vbus: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "+5V_USB_SS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_3v3_panel: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "+3.3V_PANEL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&as3722 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_hdmi_pll: regulator@9 { + compatible = "regulator-fixed"; + reg = <9>; + regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL_AP_GATE"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05_run>; + }; + + vdd_5v0_hdmi: regulator@10 { + compatible = "regulator-fixed"; + reg = <10>; + regulator-name = "+5V_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_5v0_ts: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + regulator-name = "+5V_VDD_TS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi new file mode 100644 index 000000000000..e8bb46027bed --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -0,0 +1,990 @@ +#include <dt-bindings/clock/tegra124-car.h> +#include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/memory/tegra124-mc.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> +#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "nvidia,tegra132", "nvidia,tegra124"; + interrupt-parent = <&lic>; + #address-cells = <2>; + #size-cells = <2>; + + pcie-controller@0,01003000 { + compatible = "nvidia,tegra124-pcie"; + device_type = "pci"; + reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ + 0x0 0x01003800 0x0 0x00000800 /* AFI registers */ + 0x0 0x02000000 0x0 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */ + 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */ + 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */ + 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ + + clocks = <&tegra_car TEGRA124_CLK_PCIE>, + <&tegra_car TEGRA124_CLK_AFI>, + <&tegra_car TEGRA124_CLK_PLL_E>, + <&tegra_car TEGRA124_CLK_CML0>; + clock-names = "pex", "afi", "pll_e", "cml"; + resets = <&tegra_car 70>, + <&tegra_car 72>, + <&tegra_car 74>; + reset-names = "pex", "afi", "pcie_x"; + status = "disabled"; + + phys = <&padctl TEGRA_XUSB_PADCTL_PCIE>; + phy-names = "pcie"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + }; + + host1x@0,50000000 { + compatible = "nvidia,tegra124-host1x", "simple-bus"; + reg = <0x0 0x50000000 0x0 0x00034000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */ + clocks = <&tegra_car TEGRA124_CLK_HOST1X>; + clock-names = "host1x"; + resets = <&tegra_car 28>; + reset-names = "host1x"; + + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0 0x54000000 0 0x54000000 0 0x01000000>; + + dc@0,54200000 { + compatible = "nvidia,tegra124-dc"; + reg = <0x0 0x54200000 0x0 0x00040000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_DISP1>, + <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 27>; + reset-names = "dc"; + + iommus = <&mc TEGRA_SWGROUP_DC>; + + nvidia,head = <0>; + }; + + dc@0,54240000 { + compatible = "nvidia,tegra124-dc"; + reg = <0x0 0x54240000 0x0 0x00040000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_DISP2>, + <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 26>; + reset-names = "dc"; + + iommus = <&mc TEGRA_SWGROUP_DCB>; + + nvidia,head = <1>; + }; + + hdmi@0,54280000 { + compatible = "nvidia,tegra124-hdmi"; + reg = <0x0 0x54280000 0x0 0x00040000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_HDMI>, + <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>; + clock-names = "hdmi", "parent"; + resets = <&tegra_car 51>; + reset-names = "hdmi"; + status = "disabled"; + }; + + sor@0,54540000 { + compatible = "nvidia,tegra124-sor"; + reg = <0x0 0x54540000 0x0 0x00040000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_SOR0>, + <&tegra_car TEGRA124_CLK_PLL_D_OUT0>, + <&tegra_car TEGRA124_CLK_PLL_DP>, + <&tegra_car TEGRA124_CLK_CLK_M>; + clock-names = "sor", "parent", "dp", "safe"; + resets = <&tegra_car 182>; + reset-names = "sor"; + status = "disabled"; + }; + + dpaux: dpaux@0,545c0000 { + compatible = "nvidia,tegra124-dpaux"; + reg = <0x0 0x545c0000 0x0 0x00040000>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_DPAUX>, + <&tegra_car TEGRA124_CLK_PLL_DP>; + clock-names = "dpaux", "parent"; + resets = <&tegra_car 181>; + reset-names = "dpaux"; + status = "disabled"; + }; + }; + + gic: interrupt-controller@0,50041000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x50041000 0x0 0x1000>, + <0x0 0x50042000 0x0 0x2000>, + <0x0 0x50044000 0x0 0x2000>, + <0x0 0x50046000 0x0 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-parent = <&gic>; + }; + + gpu@0,57000000 { + compatible = "nvidia,gk20a"; + reg = <0x0 0x57000000 0x0 0x01000000>, + <0x0 0x58000000 0x0 0x01000000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "stall", "nonstall"; + clocks = <&tegra_car TEGRA124_CLK_GPU>, + <&tegra_car TEGRA124_CLK_PLL_P_OUT5>; + clock-names = "gpu", "pwr"; + resets = <&tegra_car 184>; + reset-names = "gpu"; + status = "disabled"; + }; + + lic: interrupt-controller@60004000 { + compatible = "nvidia,tegra124-ictlr", "nvidia,tegra30-ictlr"; + reg = <0x0 0x60004000 0x0 0x100>, + <0x0 0x60004100 0x0 0x100>, + <0x0 0x60004200 0x0 0x100>, + <0x0 0x60004300 0x0 0x100>, + <0x0 0x60004400 0x0 0x100>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + }; + + timer@0,60005000 { + compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer"; + reg = <0x0 0x60005000 0x0 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_TIMER>; + clock-names = "timer"; + }; + + tegra_car: clock@0,60006000 { + compatible = "nvidia,tegra132-car"; + reg = <0x0 0x60006000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + nvidia,external-memory-controller = <&emc>; + }; + + flow-controller@0,60007000 { + compatible = "nvidia,tegra124-flowctrl"; + reg = <0x0 0x60007000 0x0 0x1000>; + }; + + actmon@0,6000c800 { + compatible = "nvidia,tegra124-actmon"; + reg = <0x0 0x6000c800 0x0 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_ACTMON>, + <&tegra_car TEGRA124_CLK_EMC>; + clock-names = "actmon", "emc"; + resets = <&tegra_car 119>; + reset-names = "actmon"; + }; + + gpio: gpio@0,6000d000 { + compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio"; + reg = <0x0 0x6000d000 0x0 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + apbdma: dma@0,60020000 { + compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma"; + reg = <0x0 0x60020000 0x0 0x1400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_APBDMA>; + clock-names = "dma"; + resets = <&tegra_car 34>; + reset-names = "dma"; + #dma-cells = <1>; + }; + + apbmisc@0,70000800 { + compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc"; + reg = <0x0 0x70000800 0x0 0x64>, /* Chip revision */ + <0x0 0x7000e864 0x0 0x04>; /* Strapping options */ + }; + + pinmux: pinmux@0,70000868 { + compatible = "nvidia,tegra124-pinmux"; + reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */ + <0x0 0x70003000 0x0 0x434>, /* Mux registers */ + <0x0 0x70000820 0x0 0x008>; /* MIPI pad control */ + }; + + /* + * There are two serial driver i.e. 8250 based simple serial + * driver and APB DMA based serial driver for higher baudrate + * and performace. To enable the 8250 based driver, the compatible + * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable + * the APB DMA based serial driver, the comptible is + * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart". + */ + uarta: serial@0,70006000 { + compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x70006000 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_UARTA>; + clock-names = "serial"; + resets = <&tegra_car 6>; + reset-names = "serial"; + dmas = <&apbdma 8>, <&apbdma 8>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uartb: serial@0,70006040 { + compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x70006040 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_UARTB>; + clock-names = "serial"; + resets = <&tegra_car 7>; + reset-names = "serial"; + dmas = <&apbdma 9>, <&apbdma 9>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uartc: serial@0,70006200 { + compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x70006200 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_UARTC>; + clock-names = "serial"; + resets = <&tegra_car 55>; + reset-names = "serial"; + dmas = <&apbdma 10>, <&apbdma 10>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uartd: serial@0,70006300 { + compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x70006300 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_UARTD>; + clock-names = "serial"; + resets = <&tegra_car 65>; + reset-names = "serial"; + dmas = <&apbdma 19>, <&apbdma 19>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + pwm: pwm@0,7000a000 { + compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm"; + reg = <0x0 0x7000a000 0x0 0x100>; + #pwm-cells = <2>; + clocks = <&tegra_car TEGRA124_CLK_PWM>; + clock-names = "pwm"; + resets = <&tegra_car 17>; + reset-names = "pwm"; + status = "disabled"; + }; + + i2c@0,7000c000 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c000 0x0 0x100>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_I2C1>; + clock-names = "div-clk"; + resets = <&tegra_car 12>; + reset-names = "i2c"; + dmas = <&apbdma 21>, <&apbdma 21>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@0,7000c400 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c400 0x0 0x100>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_I2C2>; + clock-names = "div-clk"; + resets = <&tegra_car 54>; + reset-names = "i2c"; + dmas = <&apbdma 22>, <&apbdma 22>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@0,7000c500 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c500 0x0 0x100>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_I2C3>; + clock-names = "div-clk"; + resets = <&tegra_car 67>; + reset-names = "i2c"; + dmas = <&apbdma 23>, <&apbdma 23>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@0,7000c700 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c700 0x0 0x100>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_I2C4>; + clock-names = "div-clk"; + resets = <&tegra_car 103>; + reset-names = "i2c"; + dmas = <&apbdma 26>, <&apbdma 26>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@0,7000d000 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000d000 0x0 0x100>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_I2C5>; + clock-names = "div-clk"; + resets = <&tegra_car 47>; + reset-names = "i2c"; + dmas = <&apbdma 24>, <&apbdma 24>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@0,7000d100 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000d100 0x0 0x100>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_I2C6>; + clock-names = "div-clk"; + resets = <&tegra_car 166>; + reset-names = "i2c"; + dmas = <&apbdma 30>, <&apbdma 30>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@0,7000d400 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x0 0x7000d400 0x0 0x200>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_SBC1>; + clock-names = "spi"; + resets = <&tegra_car 41>; + reset-names = "spi"; + dmas = <&apbdma 15>, <&apbdma 15>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@0,7000d600 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x0 0x7000d600 0x0 0x200>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_SBC2>; + clock-names = "spi"; + resets = <&tegra_car 44>; + reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@0,7000d800 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x0 0x7000d800 0x0 0x200>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_SBC3>; + clock-names = "spi"; + resets = <&tegra_car 46>; + reset-names = "spi"; + dmas = <&apbdma 17>, <&apbdma 17>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@0,7000da00 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x0 0x7000da00 0x0 0x200>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_SBC4>; + clock-names = "spi"; + resets = <&tegra_car 68>; + reset-names = "spi"; + dmas = <&apbdma 18>, <&apbdma 18>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@0,7000dc00 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x0 0x7000dc00 0x0 0x200>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_SBC5>; + clock-names = "spi"; + resets = <&tegra_car 104>; + reset-names = "spi"; + dmas = <&apbdma 27>, <&apbdma 27>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@0,7000de00 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x0 0x7000de00 0x0 0x200>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_SBC6>; + clock-names = "spi"; + resets = <&tegra_car 105>; + reset-names = "spi"; + dmas = <&apbdma 28>, <&apbdma 28>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + rtc@0,7000e000 { + compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc"; + reg = <0x0 0x7000e000 0x0 0x100>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_RTC>; + clock-names = "rtc"; + }; + + pmc@0,7000e400 { + compatible = "nvidia,tegra124-pmc"; + reg = <0x0 0x7000e400 0x0 0x400>; + clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; + }; + + fuse@0,7000f800 { + compatible = "nvidia,tegra124-efuse"; + reg = <0x0 0x7000f800 0x0 0x400>; + clocks = <&tegra_car TEGRA124_CLK_FUSE>; + clock-names = "fuse"; + resets = <&tegra_car 39>; + reset-names = "fuse"; + }; + + mc: memory-controller@0,70019000 { + compatible = "nvidia,tegra132-mc"; + reg = <0x0 0x70019000 0x0 0x1000>; + clocks = <&tegra_car TEGRA124_CLK_MC>; + clock-names = "mc"; + + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + + #iommu-cells = <1>; + }; + + emc: emc@0,7001b000 { + compatible = "nvidia,tegra132-emc", "nvidia,tegra124-emc"; + reg = <0x0 0x7001b000 0x0 0x1000>; + + nvidia,memory-controller = <&mc>; + }; + + sata@0,70020000 { + compatible = "nvidia,tegra124-ahci"; + reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */ + <0x0 0x70020000 0x0 0x7000>; /* SATA */ + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_SATA>, + <&tegra_car TEGRA124_CLK_SATA_OOB>, + <&tegra_car TEGRA124_CLK_CML1>, + <&tegra_car TEGRA124_CLK_PLL_E>; + clock-names = "sata", "sata-oob", "cml1", "pll_e"; + resets = <&tegra_car 124>, + <&tegra_car 123>, + <&tegra_car 129>; + reset-names = "sata", "sata-oob", "sata-cold"; + phys = <&padctl TEGRA_XUSB_PADCTL_SATA>; + phy-names = "sata-phy"; + status = "disabled"; + }; + + hda@0,70030000 { + compatible = "nvidia,tegra132-hda", "nvidia,tegra124-hda", + "nvidia,tegra30-hda"; + reg = <0x0 0x70030000 0x0 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_HDA>, + <&tegra_car TEGRA124_CLK_HDA2HDMI>, + <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>; + clock-names = "hda", "hda2hdmi", "hda2codec_2x"; + resets = <&tegra_car 125>, /* hda */ + <&tegra_car 128>, /* hda2hdmi */ + <&tegra_car 111>; /* hda2codec_2x */ + reset-names = "hda", "hda2hdmi", "hda2codec_2x"; + status = "disabled"; + }; + + padctl: padctl@0,7009f000 { + compatible = "nvidia,tegra132-xusb-padctl", + "nvidia,tegra124-xusb-padctl"; + reg = <0x0 0x7009f000 0x0 0x1000>; + resets = <&tegra_car 142>; + reset-names = "padctl"; + + #phy-cells = <1>; + + phys { + pcie-0 { + status = "disabled"; + }; + + sata-0 { + status = "disabled"; + }; + + usb3-0 { + status = "disabled"; + }; + + usb3-1 { + status = "disabled"; + }; + + utmi-0 { + status = "disabled"; + }; + + utmi-1 { + status = "disabled"; + }; + + utmi-2 { + status = "disabled"; + }; + }; + }; + + sdhci@0,700b0000 { + compatible = "nvidia,tegra124-sdhci"; + reg = <0x0 0x700b0000 0x0 0x200>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_SDMMC1>; + clock-names = "sdhci"; + resets = <&tegra_car 14>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdhci@0,700b0200 { + compatible = "nvidia,tegra124-sdhci"; + reg = <0x0 0x700b0200 0x0 0x200>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_SDMMC2>; + clock-names = "sdhci"; + resets = <&tegra_car 9>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdhci@0,700b0400 { + compatible = "nvidia,tegra124-sdhci"; + reg = <0x0 0x700b0400 0x0 0x200>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_SDMMC3>; + clock-names = "sdhci"; + resets = <&tegra_car 69>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdhci@0,700b0600 { + compatible = "nvidia,tegra124-sdhci"; + reg = <0x0 0x700b0600 0x0 0x200>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_SDMMC4>; + clock-names = "sdhci"; + resets = <&tegra_car 15>; + reset-names = "sdhci"; + status = "disabled"; + }; + + soctherm: thermal-sensor@0,700e2000 { + compatible = "nvidia,tegra124-soctherm"; + reg = <0x0 0x700e2000 0x0 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, + <&tegra_car TEGRA124_CLK_SOC_THERM>; + clock-names = "tsensor", "soctherm"; + resets = <&tegra_car 78>; + reset-names = "soctherm"; + #thermal-sensor-cells = <1>; + }; + + ahub@0,70300000 { + compatible = "nvidia,tegra124-ahub"; + reg = <0x0 0x70300000 0x0 0x200>, + <0x0 0x70300800 0x0 0x800>, + <0x0 0x70300200 0x0 0x600>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>, + <&tegra_car TEGRA124_CLK_APBIF>; + clock-names = "d_audio", "apbif"; + resets = <&tegra_car 106>, /* d_audio */ + <&tegra_car 107>, /* apbif */ + <&tegra_car 30>, /* i2s0 */ + <&tegra_car 11>, /* i2s1 */ + <&tegra_car 18>, /* i2s2 */ + <&tegra_car 101>, /* i2s3 */ + <&tegra_car 102>, /* i2s4 */ + <&tegra_car 108>, /* dam0 */ + <&tegra_car 109>, /* dam1 */ + <&tegra_car 110>, /* dam2 */ + <&tegra_car 10>, /* spdif */ + <&tegra_car 153>, /* amx */ + <&tegra_car 185>, /* amx1 */ + <&tegra_car 154>, /* adx */ + <&tegra_car 180>, /* adx1 */ + <&tegra_car 186>, /* afc0 */ + <&tegra_car 187>, /* afc1 */ + <&tegra_car 188>, /* afc2 */ + <&tegra_car 189>, /* afc3 */ + <&tegra_car 190>, /* afc4 */ + <&tegra_car 191>; /* afc5 */ + reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2", + "i2s3", "i2s4", "dam0", "dam1", "dam2", + "spdif", "amx", "amx1", "adx", "adx1", + "afc0", "afc1", "afc2", "afc3", "afc4", "afc5"; + dmas = <&apbdma 1>, <&apbdma 1>, + <&apbdma 2>, <&apbdma 2>, + <&apbdma 3>, <&apbdma 3>, + <&apbdma 4>, <&apbdma 4>, + <&apbdma 6>, <&apbdma 6>, + <&apbdma 7>, <&apbdma 7>, + <&apbdma 12>, <&apbdma 12>, + <&apbdma 13>, <&apbdma 13>, + <&apbdma 14>, <&apbdma 14>, + <&apbdma 29>, <&apbdma 29>; + dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2", + "rx3", "tx3", "rx4", "tx4", "rx5", "tx5", + "rx6", "tx6", "rx7", "tx7", "rx8", "tx8", + "rx9", "tx9"; + ranges; + #address-cells = <2>; + #size-cells = <2>; + + tegra_i2s0: i2s@0,70301000 { + compatible = "nvidia,tegra124-i2s"; + reg = <0x0 0x70301000 0x0 0x100>; + nvidia,ahub-cif-ids = <4 4>; + clocks = <&tegra_car TEGRA124_CLK_I2S0>; + clock-names = "i2s"; + resets = <&tegra_car 30>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s1: i2s@0,70301100 { + compatible = "nvidia,tegra124-i2s"; + reg = <0x0 0x70301100 0x0 0x100>; + nvidia,ahub-cif-ids = <5 5>; + clocks = <&tegra_car TEGRA124_CLK_I2S1>; + clock-names = "i2s"; + resets = <&tegra_car 11>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s2: i2s@0,70301200 { + compatible = "nvidia,tegra124-i2s"; + reg = <0x0 0x70301200 0x0 0x100>; + nvidia,ahub-cif-ids = <6 6>; + clocks = <&tegra_car TEGRA124_CLK_I2S2>; + clock-names = "i2s"; + resets = <&tegra_car 18>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s3: i2s@0,70301300 { + compatible = "nvidia,tegra124-i2s"; + reg = <0x0 0x70301300 0x0 0x100>; + nvidia,ahub-cif-ids = <7 7>; + clocks = <&tegra_car TEGRA124_CLK_I2S3>; + clock-names = "i2s"; + resets = <&tegra_car 101>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s4: i2s@0,70301400 { + compatible = "nvidia,tegra124-i2s"; + reg = <0x0 0x70301400 0x0 0x100>; + nvidia,ahub-cif-ids = <8 8>; + clocks = <&tegra_car TEGRA124_CLK_I2S4>; + clock-names = "i2s"; + resets = <&tegra_car 102>; + reset-names = "i2s"; + status = "disabled"; + }; + }; + + usb@0,7d000000 { + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + reg = <0x0 0x7d000000 0x0 0x4000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA124_CLK_USBD>; + clock-names = "usb"; + resets = <&tegra_car 22>; + reset-names = "usb"; + nvidia,phy = <&phy1>; + status = "disabled"; + }; + + phy1: usb-phy@0,7d000000 { + compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; + reg = <0x0 0x7d000000 0x0 0x4000>, + <0x0 0x7d000000 0x0 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA124_CLK_USBD>, + <&tegra_car TEGRA124_CLK_PLL_U>, + <&tegra_car TEGRA124_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; + nvidia,hssync-start-delay = <0>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <9>; + nvidia,xcvr-lsfslew = <0>; + nvidia,xcvr-lsrslew = <3>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + nvidia,xcvr-hsslew = <12>; + nvidia,has-utmi-pad-registers; + status = "disabled"; + }; + + usb@0,7d004000 { + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + reg = <0x0 0x7d004000 0x0 0x4000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA124_CLK_USB2>; + clock-names = "usb"; + resets = <&tegra_car 58>; + reset-names = "usb"; + nvidia,phy = <&phy2>; + status = "disabled"; + }; + + phy2: usb-phy@0,7d004000 { + compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; + reg = <0x0 0x7d004000 0x0 0x4000>, + <0x0 0x7d000000 0x0 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA124_CLK_USB2>, + <&tegra_car TEGRA124_CLK_PLL_U>, + <&tegra_car TEGRA124_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 58>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; + nvidia,hssync-start-delay = <0>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <9>; + nvidia,xcvr-lsfslew = <0>; + nvidia,xcvr-lsrslew = <3>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + nvidia,xcvr-hsslew = <12>; + status = "disabled"; + }; + + usb@0,7d008000 { + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + reg = <0x0 0x7d008000 0x0 0x4000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA124_CLK_USB3>; + clock-names = "usb"; + resets = <&tegra_car 59>; + reset-names = "usb"; + nvidia,phy = <&phy3>; + status = "disabled"; + }; + + phy3: usb-phy@0,7d008000 { + compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; + reg = <0x0 0x7d008000 0x0 0x4000>, + <0x0 0x7d000000 0x0 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA124_CLK_USB3>, + <&tegra_car TEGRA124_CLK_PLL_U>, + <&tegra_car TEGRA124_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 59>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; + nvidia,hssync-start-delay = <0>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <9>; + nvidia,xcvr-lsfslew = <0>; + nvidia,xcvr-lsrslew = <3>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + nvidia,xcvr-hsslew = <12>; + status = "disabled"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "nvidia,denver", "arm,armv8"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "nvidia,denver", "arm,armv8"; + reg = <1>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi new file mode 100644 index 000000000000..2b7f88950d1e --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -0,0 +1,45 @@ +#include "tegra210.dtsi" + +/ { + model = "NVIDIA Jetson TX1"; + compatible = "nvidia,p2180", "nvidia,tegra210"; + + aliases { + rtc1 = "/rtc@0,7000e000"; + serial0 = &uarta; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x80000000 0x1 0x0>; + }; + + /* debug port */ + serial@0,70006000 { + status = "okay"; + }; + + pmc@0,7000e400 { + nvidia,invert-interrupt; + }; + + /* eMMC */ + sdhci@0,700b0600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-0000.dts new file mode 100644 index 000000000000..1ddd8512e100 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-0000.dts @@ -0,0 +1,9 @@ +/dts-v1/; + +#include "tegra210-p2530.dtsi" +#include "tegra210-p2595.dtsi" + +/ { + model = "NVIDIA Tegra210 P2371 (P2530/P2595) reference design"; + compatible = "nvidia,p2371-0000", "nvidia,tegra210"; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts new file mode 100644 index 000000000000..683b339a980c --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts @@ -0,0 +1,9 @@ +/dts-v1/; + +#include "tegra210-p2180.dtsi" +#include "tegra210-p2597.dtsi" + +/ { + model = "NVIDIA Jetson TX1 Developer Kit"; + compatible = "nvidia,p2371-2180", "nvidia,tegra210"; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi new file mode 100644 index 000000000000..ece0dec61fae --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi @@ -0,0 +1,50 @@ +#include "tegra210.dtsi" + +/ { + model = "NVIDIA Tegra210 P2530 main board"; + compatible = "nvidia,p2530", "nvidia,tegra210"; + + aliases { + rtc1 = "/rtc@0,7000e000"; + serial0 = &uarta; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0xc0000000>; + }; + + /* debug port */ + serial@0,70006000 { + status = "okay"; + }; + + i2c@0,7000d000 { + status = "okay"; + clock-frequency = <400000>; + }; + + pmc@0,7000e400 { + nvidia,invert-interrupt; + }; + + /* eMMC */ + sdhci@0,700b0600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2571.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2571.dts new file mode 100644 index 000000000000..58d27ddd57ff --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2571.dts @@ -0,0 +1,1302 @@ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra210-p2530.dtsi" + +/ { + model = "NVIDIA Tegra210 P2571 reference design"; + compatible = "nvidia,p2571", "nvidia,tegra210"; + + pinmux: pinmux@0,700008d4 { + pinctrl-names = "boot"; + pinctrl-0 = <&state_boot>; + + state_boot: pinmux { + pex_l0_rst_n_pa0 { + nvidia,pins = "pex_l0_rst_n_pa0"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + pex_l0_clkreq_n_pa1 { + nvidia,pins = "pex_l0_clkreq_n_pa1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + pex_wake_n_pa2 { + nvidia,pins = "pex_wake_n_pa2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + pex_l1_rst_n_pa3 { + nvidia,pins = "pex_l1_rst_n_pa3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + pex_l1_clkreq_n_pa4 { + nvidia,pins = "pex_l1_clkreq_n_pa4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + sata_led_active_pa5 { + nvidia,pins = "sata_led_active_pa5"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pa6 { + nvidia,pins = "pa6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_fs_pb0 { + nvidia,pins = "dap1_fs_pb0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_din_pb1 { + nvidia,pins = "dap1_din_pb1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_dout_pb2 { + nvidia,pins = "dap1_dout_pb2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_sclk_pb3 { + nvidia,pins = "dap1_sclk_pb3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_mosi_pb4 { + nvidia,pins = "spi2_mosi_pb4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_miso_pb5 { + nvidia,pins = "spi2_miso_pb5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_sck_pb6 { + nvidia,pins = "spi2_sck_pb6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_cs0_pb7 { + nvidia,pins = "spi2_cs0_pb7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_mosi_pc0 { + nvidia,pins = "spi1_mosi_pc0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_miso_pc1 { + nvidia,pins = "spi1_miso_pc1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_sck_pc2 { + nvidia,pins = "spi1_sck_pc2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_cs0_pc3 { + nvidia,pins = "spi1_cs0_pc3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_cs1_pc4 { + nvidia,pins = "spi1_cs1_pc4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_sck_pc5 { + nvidia,pins = "spi4_sck_pc5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_cs0_pc6 { + nvidia,pins = "spi4_cs0_pc6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_mosi_pc7 { + nvidia,pins = "spi4_mosi_pc7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_miso_pd0 { + nvidia,pins = "spi4_miso_pd0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_tx_pd1 { + nvidia,pins = "uart3_tx_pd1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_rx_pd2 { + nvidia,pins = "uart3_rx_pd2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_rts_pd3 { + nvidia,pins = "uart3_rts_pd3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_cts_pd4 { + nvidia,pins = "uart3_cts_pd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic1_clk_pe0 { + nvidia,pins = "dmic1_clk_pe0"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic1_dat_pe1 { + nvidia,pins = "dmic1_dat_pe1"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic2_clk_pe2 { + nvidia,pins = "dmic2_clk_pe2"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic2_dat_pe3 { + nvidia,pins = "dmic2_dat_pe3"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic3_clk_pe4 { + nvidia,pins = "dmic3_clk_pe4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic3_dat_pe5 { + nvidia,pins = "dmic3_dat_pe5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pe6 { + nvidia,pins = "pe6"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pe7 { + nvidia,pins = "pe7"; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gen3_i2c_scl_pf0 { + nvidia,pins = "gen3_i2c_scl_pf0"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + gen3_i2c_sda_pf1 { + nvidia,pins = "gen3_i2c_sda_pf1"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + uart2_tx_pg0 { + nvidia,pins = "uart2_tx_pg0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart2_rx_pg1 { + nvidia,pins = "uart2_rx_pg1"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart2_rts_pg2 { + nvidia,pins = "uart2_rts_pg2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart2_cts_pg3 { + nvidia,pins = "uart2_cts_pg3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + wifi_en_ph0 { + nvidia,pins = "wifi_en_ph0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + wifi_rst_ph1 { + nvidia,pins = "wifi_rst_ph1"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + wifi_wake_ap_ph2 { + nvidia,pins = "wifi_wake_ap_ph2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ap_wake_bt_ph3 { + nvidia,pins = "ap_wake_bt_ph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + bt_rst_ph4 { + nvidia,pins = "bt_rst_ph4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + bt_wake_ap_ph5 { + nvidia,pins = "bt_wake_ap_ph5"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ph6 { + nvidia,pins = "ph6"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ap_wake_nfc_ph7 { + nvidia,pins = "ap_wake_nfc_ph7"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + nfc_en_pi0 { + nvidia,pins = "nfc_en_pi0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + nfc_int_pi1 { + nvidia,pins = "nfc_int_pi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gps_en_pi2 { + nvidia,pins = "gps_en_pi2"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gps_rst_pi3 { + nvidia,pins = "gps_rst_pi3"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_tx_pi4 { + nvidia,pins = "uart4_tx_pi4"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_rx_pi5 { + nvidia,pins = "uart4_rx_pi5"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_rts_pi6 { + nvidia,pins = "uart4_rts_pi6"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_cts_pi7 { + nvidia,pins = "uart4_cts_pi7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_sda_pj0 { + nvidia,pins = "gen1_i2c_sda_pj0"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_scl_pj1 { + nvidia,pins = "gen1_i2c_scl_pj1"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + gen2_i2c_scl_pj2 { + nvidia,pins = "gen2_i2c_scl_pj2"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_sda_pj3 { + nvidia,pins = "gen2_i2c_sda_pj3"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + dap4_fs_pj4 { + nvidia,pins = "dap4_fs_pj4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap4_din_pj5 { + nvidia,pins = "dap4_din_pj5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap4_dout_pj6 { + nvidia,pins = "dap4_dout_pj6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap4_sclk_pj7 { + nvidia,pins = "dap4_sclk_pj7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk0 { + nvidia,pins = "pk0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk1 { + nvidia,pins = "pk1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk2 { + nvidia,pins = "pk2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk3 { + nvidia,pins = "pk3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk4 { + nvidia,pins = "pk4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk5 { + nvidia,pins = "pk5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk6 { + nvidia,pins = "pk6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk7 { + nvidia,pins = "pk7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pl0 { + nvidia,pins = "pl0"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pl1 { + nvidia,pins = "pl1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_clk_pm0 { + nvidia,pins = "sdmmc1_clk_pm0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_cmd_pm1 { + nvidia,pins = "sdmmc1_cmd_pm1"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat3_pm2 { + nvidia,pins = "sdmmc1_dat3_pm2"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat2_pm3 { + nvidia,pins = "sdmmc1_dat2_pm3"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat1_pm4 { + nvidia,pins = "sdmmc1_dat1_pm4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat0_pm5 { + nvidia,pins = "sdmmc1_dat0_pm5"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_clk_pp0 { + nvidia,pins = "sdmmc3_clk_pp0"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cmd_pp1 { + nvidia,pins = "sdmmc3_cmd_pp1"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat3_pp2 { + nvidia,pins = "sdmmc3_dat3_pp2"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat2_pp3 { + nvidia,pins = "sdmmc3_dat2_pp3"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat1_pp4 { + nvidia,pins = "sdmmc3_dat1_pp4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat0_pp5 { + nvidia,pins = "sdmmc3_dat0_pp5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam1_mclk_ps0 { + nvidia,pins = "cam1_mclk_ps0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam2_mclk_ps1 { + nvidia,pins = "cam2_mclk_ps1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_ps2 { + nvidia,pins = "cam_i2c_scl_ps2"; + nvidia,function = "i2cvi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_sda_ps3 { + nvidia,pins = "cam_i2c_sda_ps3"; + nvidia,function = "i2cvi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + cam_rst_ps4 { + nvidia,pins = "cam_rst_ps4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_af_en_ps5 { + nvidia,pins = "cam_af_en_ps5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_flash_en_ps6 { + nvidia,pins = "cam_flash_en_ps6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam1_pwdn_ps7 { + nvidia,pins = "cam1_pwdn_ps7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam2_pwdn_pt0 { + nvidia,pins = "cam2_pwdn_pt0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam1_strobe_pt1 { + nvidia,pins = "cam1_strobe_pt1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_tx_pu0 { + nvidia,pins = "uart1_tx_pu0"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_rx_pu1 { + nvidia,pins = "uart1_rx_pu1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_rts_pu2 { + nvidia,pins = "uart1_rts_pu2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_cts_pu3 { + nvidia,pins = "uart1_cts_pu3"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_bl_pwm_pv0 { + nvidia,pins = "lcd_bl_pwm_pv0"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_bl_en_pv1 { + nvidia,pins = "lcd_bl_en_pv1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_rst_pv2 { + nvidia,pins = "lcd_rst_pv2"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_gpio1_pv3 { + nvidia,pins = "lcd_gpio1_pv3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_gpio2_pv4 { + nvidia,pins = "lcd_gpio2_pv4"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ap_ready_pv5 { + nvidia,pins = "ap_ready_pv5"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + touch_rst_pv6 { + nvidia,pins = "touch_rst_pv6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + touch_clk_pv7 { + nvidia,pins = "touch_clk_pv7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + modem_wake_ap_px0 { + nvidia,pins = "modem_wake_ap_px0"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + touch_int_px1 { + nvidia,pins = "touch_int_px1"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + motion_int_px2 { + nvidia,pins = "motion_int_px2"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + als_prox_int_px3 { + nvidia,pins = "als_prox_int_px3"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + temp_alert_px4 { + nvidia,pins = "temp_alert_px4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_power_on_px5 { + nvidia,pins = "button_power_on_px5"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_vol_up_px6 { + nvidia,pins = "button_vol_up_px6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_vol_down_px7 { + nvidia,pins = "button_vol_down_px7"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_slide_sw_py0 { + nvidia,pins = "button_slide_sw_py0"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_home_py1 { + nvidia,pins = "button_home_py1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_te_py2 { + nvidia,pins = "lcd_te_py2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_scl_py3 { + nvidia,pins = "pwr_i2c_scl_py3"; + nvidia,function = "i2cpmu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_sda_py4 { + nvidia,pins = "pwr_i2c_sda_py4"; + nvidia,function = "i2cpmu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + clk_32k_out_py5 { + nvidia,pins = "clk_32k_out_py5"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz0 { + nvidia,pins = "pz0"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz1 { + nvidia,pins = "pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz2 { + nvidia,pins = "pz2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz3 { + nvidia,pins = "pz3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz4 { + nvidia,pins = "pz4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz5 { + nvidia,pins = "pz5"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_fs_paa0 { + nvidia,pins = "dap2_fs_paa0"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_sclk_paa1 { + nvidia,pins = "dap2_sclk_paa1"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_din_paa2 { + nvidia,pins = "dap2_din_paa2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_dout_paa3 { + nvidia,pins = "dap2_dout_paa3"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + aud_mclk_pbb0 { + nvidia,pins = "aud_mclk_pbb0"; + nvidia,function = "aud"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dvfs_clk_pbb2 { + nvidia,pins = "dvfs_clk_pbb2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gpio_x1_aud_pbb3 { + nvidia,pins = "gpio_x1_aud_pbb3"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gpio_x3_aud_pbb4 { + nvidia,pins = "gpio_x3_aud_pbb4"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + hdmi_cec_pcc0 { + nvidia,pins = "hdmi_cec_pcc0"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + hdmi_int_dp_hpd_pcc1 { + nvidia,pins = "hdmi_int_dp_hpd_pcc1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + spdif_out_pcc2 { + nvidia,pins = "spdif_out_pcc2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spdif_in_pcc3 { + nvidia,pins = "spdif_in_pcc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + usb_vbus_en0_pcc4 { + nvidia,pins = "usb_vbus_en0_pcc4"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en1_pcc5 { + nvidia,pins = "usb_vbus_en1_pcc5"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + dp_hpd0_pcc6 { + nvidia,pins = "dp_hpd0_pcc6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pcc7 { + nvidia,pins = "pcc7"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + spi2_cs1_pdd0 { + nvidia,pins = "spi2_cs1_pdd0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_sck_pee0 { + nvidia,pins = "qspi_sck_pee0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_cs_n_pee1 { + nvidia,pins = "qspi_cs_n_pee1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io0_pee2 { + nvidia,pins = "qspi_io0_pee2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io1_pee3 { + nvidia,pins = "qspi_io1_pee3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io2_pee4 { + nvidia,pins = "qspi_io2_pee4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io3_pee5 { + nvidia,pins = "qspi_io3_pee5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "core"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "jtag"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + clk_req { + nvidia,pins = "clk_req"; + nvidia,function = "sys"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + shutdown { + nvidia,pins = "shutdown"; + nvidia,function = "shutdown"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi new file mode 100644 index 000000000000..f3f91392214e --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi @@ -0,0 +1,1272 @@ +/ { + model = "NVIDIA Tegra210 P2595 I/O board"; + compatible = "nvidia,p2595", "nvidia,tegra210"; + + pinmux: pinmux@0,700008d4 { + pinctrl-names = "boot"; + pinctrl-0 = <&state_boot>; + + state_boot: pinmux { + pex_l0_rst_n_pa0 { + nvidia,pins = "pex_l0_rst_n_pa0"; + nvidia,function = "pe0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + pex_l0_clkreq_n_pa1 { + nvidia,pins = "pex_l0_clkreq_n_pa1"; + nvidia,function = "pe0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + pex_wake_n_pa2 { + nvidia,pins = "pex_wake_n_pa2"; + nvidia,function = "pe"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + pex_l1_rst_n_pa3 { + nvidia,pins = "pex_l1_rst_n_pa3"; + nvidia,function = "pe1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + pex_l1_clkreq_n_pa4 { + nvidia,pins = "pex_l1_clkreq_n_pa4"; + nvidia,function = "pe1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + sata_led_active_pa5 { + nvidia,pins = "sata_led_active_pa5"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pa6 { + nvidia,pins = "pa6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_fs_pb0 { + nvidia,pins = "dap1_fs_pb0"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_din_pb1 { + nvidia,pins = "dap1_din_pb1"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_dout_pb2 { + nvidia,pins = "dap1_dout_pb2"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_sclk_pb3 { + nvidia,pins = "dap1_sclk_pb3"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_mosi_pb4 { + nvidia,pins = "spi2_mosi_pb4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_miso_pb5 { + nvidia,pins = "spi2_miso_pb5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_sck_pb6 { + nvidia,pins = "spi2_sck_pb6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_cs0_pb7 { + nvidia,pins = "spi2_cs0_pb7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_mosi_pc0 { + nvidia,pins = "spi1_mosi_pc0"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_miso_pc1 { + nvidia,pins = "spi1_miso_pc1"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_sck_pc2 { + nvidia,pins = "spi1_sck_pc2"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_cs0_pc3 { + nvidia,pins = "spi1_cs0_pc3"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_cs1_pc4 { + nvidia,pins = "spi1_cs1_pc4"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_sck_pc5 { + nvidia,pins = "spi4_sck_pc5"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_cs0_pc6 { + nvidia,pins = "spi4_cs0_pc6"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_mosi_pc7 { + nvidia,pins = "spi4_mosi_pc7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_miso_pd0 { + nvidia,pins = "spi4_miso_pd0"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_tx_pd1 { + nvidia,pins = "uart3_tx_pd1"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_rx_pd2 { + nvidia,pins = "uart3_rx_pd2"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_rts_pd3 { + nvidia,pins = "uart3_rts_pd3"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_cts_pd4 { + nvidia,pins = "uart3_cts_pd4"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic1_clk_pe0 { + nvidia,pins = "dmic1_clk_pe0"; + nvidia,function = "dmic1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic1_dat_pe1 { + nvidia,pins = "dmic1_dat_pe1"; + nvidia,function = "dmic1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic2_clk_pe2 { + nvidia,pins = "dmic2_clk_pe2"; + nvidia,function = "dmic2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic2_dat_pe3 { + nvidia,pins = "dmic2_dat_pe3"; + nvidia,function = "dmic2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic3_clk_pe4 { + nvidia,pins = "dmic3_clk_pe4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic3_dat_pe5 { + nvidia,pins = "dmic3_dat_pe5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pe6 { + nvidia,pins = "pe6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pe7 { + nvidia,pins = "pe7"; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gen3_i2c_scl_pf0 { + nvidia,pins = "gen3_i2c_scl_pf0"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + gen3_i2c_sda_pf1 { + nvidia,pins = "gen3_i2c_sda_pf1"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + uart2_tx_pg0 { + nvidia,pins = "uart2_tx_pg0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart2_rx_pg1 { + nvidia,pins = "uart2_rx_pg1"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart2_rts_pg2 { + nvidia,pins = "uart2_rts_pg2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart2_cts_pg3 { + nvidia,pins = "uart2_cts_pg3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + wifi_en_ph0 { + nvidia,pins = "wifi_en_ph0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + wifi_rst_ph1 { + nvidia,pins = "wifi_rst_ph1"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + wifi_wake_ap_ph2 { + nvidia,pins = "wifi_wake_ap_ph2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ap_wake_bt_ph3 { + nvidia,pins = "ap_wake_bt_ph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + bt_rst_ph4 { + nvidia,pins = "bt_rst_ph4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + bt_wake_ap_ph5 { + nvidia,pins = "bt_wake_ap_ph5"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ph6 { + nvidia,pins = "ph6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ap_wake_nfc_ph7 { + nvidia,pins = "ap_wake_nfc_ph7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + nfc_en_pi0 { + nvidia,pins = "nfc_en_pi0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + nfc_int_pi1 { + nvidia,pins = "nfc_int_pi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gps_en_pi2 { + nvidia,pins = "gps_en_pi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gps_rst_pi3 { + nvidia,pins = "gps_rst_pi3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_tx_pi4 { + nvidia,pins = "uart4_tx_pi4"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_rx_pi5 { + nvidia,pins = "uart4_rx_pi5"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_rts_pi6 { + nvidia,pins = "uart4_rts_pi6"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_cts_pi7 { + nvidia,pins = "uart4_cts_pi7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_sda_pj0 { + nvidia,pins = "gen1_i2c_sda_pj0"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_scl_pj1 { + nvidia,pins = "gen1_i2c_scl_pj1"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + gen2_i2c_scl_pj2 { + nvidia,pins = "gen2_i2c_scl_pj2"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_sda_pj3 { + nvidia,pins = "gen2_i2c_sda_pj3"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + dap4_fs_pj4 { + nvidia,pins = "dap4_fs_pj4"; + nvidia,function = "i2s4b"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap4_din_pj5 { + nvidia,pins = "dap4_din_pj5"; + nvidia,function = "i2s4b"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap4_dout_pj6 { + nvidia,pins = "dap4_dout_pj6"; + nvidia,function = "i2s4b"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap4_sclk_pj7 { + nvidia,pins = "dap4_sclk_pj7"; + nvidia,function = "i2s4b"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk0 { + nvidia,pins = "pk0"; + nvidia,function = "i2s5b"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk1 { + nvidia,pins = "pk1"; + nvidia,function = "i2s5b"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk2 { + nvidia,pins = "pk2"; + nvidia,function = "i2s5b"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk3 { + nvidia,pins = "pk3"; + nvidia,function = "i2s5b"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk4 { + nvidia,pins = "pk4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk5 { + nvidia,pins = "pk5"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk6 { + nvidia,pins = "pk6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk7 { + nvidia,pins = "pk7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pl0 { + nvidia,pins = "pl0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pl1 { + nvidia,pins = "pl1"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_clk_pm0 { + nvidia,pins = "sdmmc1_clk_pm0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_cmd_pm1 { + nvidia,pins = "sdmmc1_cmd_pm1"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat3_pm2 { + nvidia,pins = "sdmmc1_dat3_pm2"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat2_pm3 { + nvidia,pins = "sdmmc1_dat2_pm3"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat1_pm4 { + nvidia,pins = "sdmmc1_dat1_pm4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat0_pm5 { + nvidia,pins = "sdmmc1_dat0_pm5"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_clk_pp0 { + nvidia,pins = "sdmmc3_clk_pp0"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cmd_pp1 { + nvidia,pins = "sdmmc3_cmd_pp1"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat3_pp2 { + nvidia,pins = "sdmmc3_dat3_pp2"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat2_pp3 { + nvidia,pins = "sdmmc3_dat2_pp3"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat1_pp4 { + nvidia,pins = "sdmmc3_dat1_pp4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat0_pp5 { + nvidia,pins = "sdmmc3_dat0_pp5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam1_mclk_ps0 { + nvidia,pins = "cam1_mclk_ps0"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam2_mclk_ps1 { + nvidia,pins = "cam2_mclk_ps1"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_ps2 { + nvidia,pins = "cam_i2c_scl_ps2"; + nvidia,function = "i2cvi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_sda_ps3 { + nvidia,pins = "cam_i2c_sda_ps3"; + nvidia,function = "i2cvi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + cam_rst_ps4 { + nvidia,pins = "cam_rst_ps4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_af_en_ps5 { + nvidia,pins = "cam_af_en_ps5"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_flash_en_ps6 { + nvidia,pins = "cam_flash_en_ps6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam1_pwdn_ps7 { + nvidia,pins = "cam1_pwdn_ps7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam2_pwdn_pt0 { + nvidia,pins = "cam2_pwdn_pt0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam1_strobe_pt1 { + nvidia,pins = "cam1_strobe_pt1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_tx_pu0 { + nvidia,pins = "uart1_tx_pu0"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_rx_pu1 { + nvidia,pins = "uart1_rx_pu1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_rts_pu2 { + nvidia,pins = "uart1_rts_pu2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_cts_pu3 { + nvidia,pins = "uart1_cts_pu3"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_bl_pwm_pv0 { + nvidia,pins = "lcd_bl_pwm_pv0"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_bl_en_pv1 { + nvidia,pins = "lcd_bl_en_pv1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_rst_pv2 { + nvidia,pins = "lcd_rst_pv2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_gpio1_pv3 { + nvidia,pins = "lcd_gpio1_pv3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_gpio2_pv4 { + nvidia,pins = "lcd_gpio2_pv4"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ap_ready_pv5 { + nvidia,pins = "ap_ready_pv5"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + touch_rst_pv6 { + nvidia,pins = "touch_rst_pv6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + touch_clk_pv7 { + nvidia,pins = "touch_clk_pv7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + modem_wake_ap_px0 { + nvidia,pins = "modem_wake_ap_px0"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + touch_int_px1 { + nvidia,pins = "touch_int_px1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + motion_int_px2 { + nvidia,pins = "motion_int_px2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + als_prox_int_px3 { + nvidia,pins = "als_prox_int_px3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + temp_alert_px4 { + nvidia,pins = "temp_alert_px4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_power_on_px5 { + nvidia,pins = "button_power_on_px5"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_vol_up_px6 { + nvidia,pins = "button_vol_up_px6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_vol_down_px7 { + nvidia,pins = "button_vol_down_px7"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_slide_sw_py0 { + nvidia,pins = "button_slide_sw_py0"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_home_py1 { + nvidia,pins = "button_home_py1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_te_py2 { + nvidia,pins = "lcd_te_py2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_scl_py3 { + nvidia,pins = "pwr_i2c_scl_py3"; + nvidia,function = "i2cpmu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_sda_py4 { + nvidia,pins = "pwr_i2c_sda_py4"; + nvidia,function = "i2cpmu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + clk_32k_out_py5 { + nvidia,pins = "clk_32k_out_py5"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz0 { + nvidia,pins = "pz0"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz1 { + nvidia,pins = "pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz2 { + nvidia,pins = "pz2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz3 { + nvidia,pins = "pz3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz4 { + nvidia,pins = "pz4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz5 { + nvidia,pins = "pz5"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_fs_paa0 { + nvidia,pins = "dap2_fs_paa0"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_sclk_paa1 { + nvidia,pins = "dap2_sclk_paa1"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_din_paa2 { + nvidia,pins = "dap2_din_paa2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_dout_paa3 { + nvidia,pins = "dap2_dout_paa3"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + aud_mclk_pbb0 { + nvidia,pins = "aud_mclk_pbb0"; + nvidia,function = "aud"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dvfs_clk_pbb2 { + nvidia,pins = "dvfs_clk_pbb2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gpio_x1_aud_pbb3 { + nvidia,pins = "gpio_x1_aud_pbb3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gpio_x3_aud_pbb4 { + nvidia,pins = "gpio_x3_aud_pbb4"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + hdmi_cec_pcc0 { + nvidia,pins = "hdmi_cec_pcc0"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + hdmi_int_dp_hpd_pcc1 { + nvidia,pins = "hdmi_int_dp_hpd_pcc1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + spdif_out_pcc2 { + nvidia,pins = "spdif_out_pcc2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spdif_in_pcc3 { + nvidia,pins = "spdif_in_pcc3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + usb_vbus_en0_pcc4 { + nvidia,pins = "usb_vbus_en0_pcc4"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en1_pcc5 { + nvidia,pins = "usb_vbus_en1_pcc5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + dp_hpd0_pcc6 { + nvidia,pins = "dp_hpd0_pcc6"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pcc7 { + nvidia,pins = "pcc7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + spi2_cs1_pdd0 { + nvidia,pins = "spi2_cs1_pdd0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_sck_pee0 { + nvidia,pins = "qspi_sck_pee0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_cs_n_pee1 { + nvidia,pins = "qspi_cs_n_pee1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io0_pee2 { + nvidia,pins = "qspi_io0_pee2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io1_pee3 { + nvidia,pins = "qspi_io1_pee3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io2_pee4 { + nvidia,pins = "qspi_io2_pee4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io3_pee5 { + nvidia,pins = "qspi_io3_pee5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "core"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "jtag"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + clk_req { + nvidia,pins = "clk_req"; + nvidia,function = "sys"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + shutdown { + nvidia,pins = "shutdown"; + nvidia,function = "shutdown"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi new file mode 100644 index 000000000000..be3eccbe8013 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -0,0 +1,1270 @@ +/ { + model = "NVIDIA Tegra210 P2597 I/O board"; + compatible = "nvidia,p2597", "nvidia,tegra210"; + + pinmux: pinmux@0,700008d4 { + pinctrl-names = "boot"; + pinctrl-0 = <&state_boot>; + + state_boot: pinmux { + pex_l0_rst_n_pa0 { + nvidia,pins = "pex_l0_rst_n_pa0"; + nvidia,function = "pe0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + pex_l0_clkreq_n_pa1 { + nvidia,pins = "pex_l0_clkreq_n_pa1"; + nvidia,function = "pe0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + pex_wake_n_pa2 { + nvidia,pins = "pex_wake_n_pa2"; + nvidia,function = "pe"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + pex_l1_rst_n_pa3 { + nvidia,pins = "pex_l1_rst_n_pa3"; + nvidia,function = "pe1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + pex_l1_clkreq_n_pa4 { + nvidia,pins = "pex_l1_clkreq_n_pa4"; + nvidia,function = "pe1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + sata_led_active_pa5 { + nvidia,pins = "sata_led_active_pa5"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pa6 { + nvidia,pins = "pa6"; + nvidia,function = "sata"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_fs_pb0 { + nvidia,pins = "dap1_fs_pb0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_din_pb1 { + nvidia,pins = "dap1_din_pb1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_dout_pb2 { + nvidia,pins = "dap1_dout_pb2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_sclk_pb3 { + nvidia,pins = "dap1_sclk_pb3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_mosi_pb4 { + nvidia,pins = "spi2_mosi_pb4"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_miso_pb5 { + nvidia,pins = "spi2_miso_pb5"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_sck_pb6 { + nvidia,pins = "spi2_sck_pb6"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_cs0_pb7 { + nvidia,pins = "spi2_cs0_pb7"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_mosi_pc0 { + nvidia,pins = "spi1_mosi_pc0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_miso_pc1 { + nvidia,pins = "spi1_miso_pc1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_sck_pc2 { + nvidia,pins = "spi1_sck_pc2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_cs0_pc3 { + nvidia,pins = "spi1_cs0_pc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_cs1_pc4 { + nvidia,pins = "spi1_cs1_pc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_sck_pc5 { + nvidia,pins = "spi4_sck_pc5"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_cs0_pc6 { + nvidia,pins = "spi4_cs0_pc6"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_mosi_pc7 { + nvidia,pins = "spi4_mosi_pc7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_miso_pd0 { + nvidia,pins = "spi4_miso_pd0"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_tx_pd1 { + nvidia,pins = "uart3_tx_pd1"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_rx_pd2 { + nvidia,pins = "uart3_rx_pd2"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_rts_pd3 { + nvidia,pins = "uart3_rts_pd3"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_cts_pd4 { + nvidia,pins = "uart3_cts_pd4"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic1_clk_pe0 { + nvidia,pins = "dmic1_clk_pe0"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic1_dat_pe1 { + nvidia,pins = "dmic1_dat_pe1"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic2_clk_pe2 { + nvidia,pins = "dmic2_clk_pe2"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic2_dat_pe3 { + nvidia,pins = "dmic2_dat_pe3"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic3_clk_pe4 { + nvidia,pins = "dmic3_clk_pe4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic3_dat_pe5 { + nvidia,pins = "dmic3_dat_pe5"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pe6 { + nvidia,pins = "pe6"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pe7 { + nvidia,pins = "pe7"; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gen3_i2c_scl_pf0 { + nvidia,pins = "gen3_i2c_scl_pf0"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + gen3_i2c_sda_pf1 { + nvidia,pins = "gen3_i2c_sda_pf1"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + uart2_tx_pg0 { + nvidia,pins = "uart2_tx_pg0"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart2_rx_pg1 { + nvidia,pins = "uart2_rx_pg1"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart2_rts_pg2 { + nvidia,pins = "uart2_rts_pg2"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart2_cts_pg3 { + nvidia,pins = "uart2_cts_pg3"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + wifi_en_ph0 { + nvidia,pins = "wifi_en_ph0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + wifi_rst_ph1 { + nvidia,pins = "wifi_rst_ph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + wifi_wake_ap_ph2 { + nvidia,pins = "wifi_wake_ap_ph2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ap_wake_bt_ph3 { + nvidia,pins = "ap_wake_bt_ph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + bt_rst_ph4 { + nvidia,pins = "bt_rst_ph4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + bt_wake_ap_ph5 { + nvidia,pins = "bt_wake_ap_ph5"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ph6 { + nvidia,pins = "ph6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ap_wake_nfc_ph7 { + nvidia,pins = "ap_wake_nfc_ph7"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + nfc_en_pi0 { + nvidia,pins = "nfc_en_pi0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + nfc_int_pi1 { + nvidia,pins = "nfc_int_pi1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gps_en_pi2 { + nvidia,pins = "gps_en_pi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gps_rst_pi3 { + nvidia,pins = "gps_rst_pi3"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_tx_pi4 { + nvidia,pins = "uart4_tx_pi4"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_rx_pi5 { + nvidia,pins = "uart4_rx_pi5"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_rts_pi6 { + nvidia,pins = "uart4_rts_pi6"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_cts_pi7 { + nvidia,pins = "uart4_cts_pi7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_sda_pj0 { + nvidia,pins = "gen1_i2c_sda_pj0"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_scl_pj1 { + nvidia,pins = "gen1_i2c_scl_pj1"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + gen2_i2c_scl_pj2 { + nvidia,pins = "gen2_i2c_scl_pj2"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_sda_pj3 { + nvidia,pins = "gen2_i2c_sda_pj3"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + dap4_fs_pj4 { + nvidia,pins = "dap4_fs_pj4"; + nvidia,function = "i2s4b"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap4_din_pj5 { + nvidia,pins = "dap4_din_pj5"; + nvidia,function = "i2s4b"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap4_dout_pj6 { + nvidia,pins = "dap4_dout_pj6"; + nvidia,function = "i2s4b"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap4_sclk_pj7 { + nvidia,pins = "dap4_sclk_pj7"; + nvidia,function = "i2s4b"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk0 { + nvidia,pins = "pk0"; + nvidia,function = "i2s5b"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk1 { + nvidia,pins = "pk1"; + nvidia,function = "i2s5b"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk2 { + nvidia,pins = "pk2"; + nvidia,function = "i2s5b"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk3 { + nvidia,pins = "pk3"; + nvidia,function = "i2s5b"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk4 { + nvidia,pins = "pk4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk5 { + nvidia,pins = "pk5"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk6 { + nvidia,pins = "pk6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk7 { + nvidia,pins = "pk7"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pl0 { + nvidia,pins = "pl0"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pl1 { + nvidia,pins = "pl1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_clk_pm0 { + nvidia,pins = "sdmmc1_clk_pm0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_cmd_pm1 { + nvidia,pins = "sdmmc1_cmd_pm1"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat3_pm2 { + nvidia,pins = "sdmmc1_dat3_pm2"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat2_pm3 { + nvidia,pins = "sdmmc1_dat2_pm3"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat1_pm4 { + nvidia,pins = "sdmmc1_dat1_pm4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat0_pm5 { + nvidia,pins = "sdmmc1_dat0_pm5"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_clk_pp0 { + nvidia,pins = "sdmmc3_clk_pp0"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cmd_pp1 { + nvidia,pins = "sdmmc3_cmd_pp1"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat3_pp2 { + nvidia,pins = "sdmmc3_dat3_pp2"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat2_pp3 { + nvidia,pins = "sdmmc3_dat2_pp3"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat1_pp4 { + nvidia,pins = "sdmmc3_dat1_pp4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat0_pp5 { + nvidia,pins = "sdmmc3_dat0_pp5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam1_mclk_ps0 { + nvidia,pins = "cam1_mclk_ps0"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam2_mclk_ps1 { + nvidia,pins = "cam2_mclk_ps1"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_ps2 { + nvidia,pins = "cam_i2c_scl_ps2"; + nvidia,function = "i2cvi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_sda_ps3 { + nvidia,pins = "cam_i2c_sda_ps3"; + nvidia,function = "i2cvi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + cam_rst_ps4 { + nvidia,pins = "cam_rst_ps4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_af_en_ps5 { + nvidia,pins = "cam_af_en_ps5"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_flash_en_ps6 { + nvidia,pins = "cam_flash_en_ps6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam1_pwdn_ps7 { + nvidia,pins = "cam1_pwdn_ps7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam2_pwdn_pt0 { + nvidia,pins = "cam2_pwdn_pt0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam1_strobe_pt1 { + nvidia,pins = "cam1_strobe_pt1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_tx_pu0 { + nvidia,pins = "uart1_tx_pu0"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_rx_pu1 { + nvidia,pins = "uart1_rx_pu1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_rts_pu2 { + nvidia,pins = "uart1_rts_pu2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_cts_pu3 { + nvidia,pins = "uart1_cts_pu3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_bl_pwm_pv0 { + nvidia,pins = "lcd_bl_pwm_pv0"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_bl_en_pv1 { + nvidia,pins = "lcd_bl_en_pv1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_rst_pv2 { + nvidia,pins = "lcd_rst_pv2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_gpio1_pv3 { + nvidia,pins = "lcd_gpio1_pv3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_gpio2_pv4 { + nvidia,pins = "lcd_gpio2_pv4"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ap_ready_pv5 { + nvidia,pins = "ap_ready_pv5"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + touch_rst_pv6 { + nvidia,pins = "touch_rst_pv6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + touch_clk_pv7 { + nvidia,pins = "touch_clk_pv7"; + nvidia,function = "touch"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + modem_wake_ap_px0 { + nvidia,pins = "modem_wake_ap_px0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + touch_int_px1 { + nvidia,pins = "touch_int_px1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + motion_int_px2 { + nvidia,pins = "motion_int_px2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + als_prox_int_px3 { + nvidia,pins = "als_prox_int_px3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + temp_alert_px4 { + nvidia,pins = "temp_alert_px4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_power_on_px5 { + nvidia,pins = "button_power_on_px5"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_vol_up_px6 { + nvidia,pins = "button_vol_up_px6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_vol_down_px7 { + nvidia,pins = "button_vol_down_px7"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_slide_sw_py0 { + nvidia,pins = "button_slide_sw_py0"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_home_py1 { + nvidia,pins = "button_home_py1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_te_py2 { + nvidia,pins = "lcd_te_py2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_scl_py3 { + nvidia,pins = "pwr_i2c_scl_py3"; + nvidia,function = "i2cpmu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_sda_py4 { + nvidia,pins = "pwr_i2c_sda_py4"; + nvidia,function = "i2cpmu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + clk_32k_out_py5 { + nvidia,pins = "clk_32k_out_py5"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz0 { + nvidia,pins = "pz0"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz1 { + nvidia,pins = "pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz2 { + nvidia,pins = "pz2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz3 { + nvidia,pins = "pz3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz4 { + nvidia,pins = "pz4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz5 { + nvidia,pins = "pz5"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_fs_paa0 { + nvidia,pins = "dap2_fs_paa0"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_sclk_paa1 { + nvidia,pins = "dap2_sclk_paa1"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_din_paa2 { + nvidia,pins = "dap2_din_paa2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_dout_paa3 { + nvidia,pins = "dap2_dout_paa3"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + aud_mclk_pbb0 { + nvidia,pins = "aud_mclk_pbb0"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dvfs_clk_pbb2 { + nvidia,pins = "dvfs_clk_pbb2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gpio_x1_aud_pbb3 { + nvidia,pins = "gpio_x1_aud_pbb3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gpio_x3_aud_pbb4 { + nvidia,pins = "gpio_x3_aud_pbb4"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + hdmi_cec_pcc0 { + nvidia,pins = "hdmi_cec_pcc0"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + hdmi_int_dp_hpd_pcc1 { + nvidia,pins = "hdmi_int_dp_hpd_pcc1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + spdif_out_pcc2 { + nvidia,pins = "spdif_out_pcc2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spdif_in_pcc3 { + nvidia,pins = "spdif_in_pcc3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + usb_vbus_en0_pcc4 { + nvidia,pins = "usb_vbus_en0_pcc4"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en1_pcc5 { + nvidia,pins = "usb_vbus_en1_pcc5"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + dp_hpd0_pcc6 { + nvidia,pins = "dp_hpd0_pcc6"; + nvidia,function = "dp"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pcc7 { + nvidia,pins = "pcc7"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + spi2_cs1_pdd0 { + nvidia,pins = "spi2_cs1_pdd0"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_sck_pee0 { + nvidia,pins = "qspi_sck_pee0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_cs_n_pee1 { + nvidia,pins = "qspi_cs_n_pee1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io0_pee2 { + nvidia,pins = "qspi_io0_pee2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io1_pee3 { + nvidia,pins = "qspi_io1_pee3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io2_pee4 { + nvidia,pins = "qspi_io2_pee4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io3_pee5 { + nvidia,pins = "qspi_io3_pee5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "core"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "jtag"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + clk_req { + nvidia,pins = "clk_req"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + shutdown { + nvidia,pins = "shutdown"; + nvidia,function = "shutdown"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + }; + }; + + /* MMC/SD */ + sdhci@0,700b0000 { + status = "okay"; + bus-width = <4>; + no-1-8-v; + + cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi new file mode 100644 index 000000000000..bc23f4dea002 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -0,0 +1,805 @@ +#include <dt-bindings/clock/tegra210-car.h> +#include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/memory/tegra210-mc.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "nvidia,tegra210"; + interrupt-parent = <&lic>; + #address-cells = <2>; + #size-cells = <2>; + + host1x@0,50000000 { + compatible = "nvidia,tegra210-host1x", "simple-bus"; + reg = <0x0 0x50000000 0x0 0x00034000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */ + clocks = <&tegra_car TEGRA210_CLK_HOST1X>; + clock-names = "host1x"; + resets = <&tegra_car 28>; + reset-names = "host1x"; + + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x0 0x54000000 0x0 0x54000000 0x0 0x01000000>; + + dpaux1: dpaux@0,54040000 { + compatible = "nvidia,tegra210-dpaux"; + reg = <0x0 0x54040000 0x0 0x00040000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_DPAUX1>, + <&tegra_car TEGRA210_CLK_PLL_DP>; + clock-names = "dpaux", "parent"; + resets = <&tegra_car 207>; + reset-names = "dpaux"; + status = "disabled"; + }; + + vi@0,54080000 { + compatible = "nvidia,tegra210-vi"; + reg = <0x0 0x54080000 0x0 0x00040000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + tsec@0,54100000 { + compatible = "nvidia,tegra210-tsec"; + reg = <0x0 0x54100000 0x0 0x00040000>; + }; + + dc@0,54200000 { + compatible = "nvidia,tegra210-dc"; + reg = <0x0 0x54200000 0x0 0x00040000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_DISP1>, + <&tegra_car TEGRA210_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 27>; + reset-names = "dc"; + + iommus = <&mc TEGRA_SWGROUP_DC>; + + nvidia,head = <0>; + }; + + dc@0,54240000 { + compatible = "nvidia,tegra210-dc"; + reg = <0x0 0x54240000 0x0 0x00040000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_DISP2>, + <&tegra_car TEGRA210_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 26>; + reset-names = "dc"; + + iommus = <&mc TEGRA_SWGROUP_DCB>; + + nvidia,head = <1>; + }; + + dsi@0,54300000 { + compatible = "nvidia,tegra210-dsi"; + reg = <0x0 0x54300000 0x0 0x00040000>; + clocks = <&tegra_car TEGRA210_CLK_DSIA>, + <&tegra_car TEGRA210_CLK_DSIALP>, + <&tegra_car TEGRA210_CLK_PLL_D_OUT0>; + clock-names = "dsi", "lp", "parent"; + resets = <&tegra_car 48>; + reset-names = "dsi"; + nvidia,mipi-calibrate = <&mipi 0x0c0>; /* DSIA & DSIB pads */ + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + vic@0,54340000 { + compatible = "nvidia,tegra210-vic"; + reg = <0x0 0x54340000 0x0 0x00040000>; + status = "disabled"; + }; + + nvjpg@0,54380000 { + compatible = "nvidia,tegra210-nvjpg"; + reg = <0x0 0x54380000 0x0 0x00040000>; + status = "disabled"; + }; + + dsi@0,54400000 { + compatible = "nvidia,tegra210-dsi"; + reg = <0x0 0x54400000 0x0 0x00040000>; + clocks = <&tegra_car TEGRA210_CLK_DSIB>, + <&tegra_car TEGRA210_CLK_DSIBLP>, + <&tegra_car TEGRA210_CLK_PLL_D_OUT0>; + clock-names = "dsi", "lp", "parent"; + resets = <&tegra_car 82>; + reset-names = "dsi"; + nvidia,mipi-calibrate = <&mipi 0x300>; /* DSIC & DSID pads */ + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + nvdec@0,54480000 { + compatible = "nvidia,tegra210-nvdec"; + reg = <0x0 0x54480000 0x0 0x00040000>; + status = "disabled"; + }; + + nvenc@0,544c0000 { + compatible = "nvidia,tegra210-nvenc"; + reg = <0x0 0x544c0000 0x0 0x00040000>; + status = "disabled"; + }; + + tsec@0,54500000 { + compatible = "nvidia,tegra210-tsec"; + reg = <0x0 0x54500000 0x0 0x00040000>; + status = "disabled"; + }; + + sor@0,54540000 { + compatible = "nvidia,tegra210-sor"; + reg = <0x0 0x54540000 0x0 0x00040000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_SOR0>, + <&tegra_car TEGRA210_CLK_PLL_D_OUT0>, + <&tegra_car TEGRA210_CLK_PLL_DP>, + <&tegra_car TEGRA210_CLK_SOR_SAFE>; + clock-names = "sor", "parent", "dp", "safe"; + resets = <&tegra_car 182>; + reset-names = "sor"; + status = "disabled"; + }; + + sor@0,54580000 { + compatible = "nvidia,tegra210-sor1"; + reg = <0x0 0x54580000 0x0 0x00040000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_SOR1>, + <&tegra_car TEGRA210_CLK_PLL_D2_OUT0>, + <&tegra_car TEGRA210_CLK_PLL_DP>, + <&tegra_car TEGRA210_CLK_SOR_SAFE>; + clock-names = "sor", "parent", "dp", "safe"; + resets = <&tegra_car 183>; + reset-names = "sor"; + status = "disabled"; + }; + + dpaux: dpaux@0,545c0000 { + compatible = "nvidia,tegra124-dpaux"; + reg = <0x0 0x545c0000 0x0 0x00040000>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_DPAUX>, + <&tegra_car TEGRA210_CLK_PLL_DP>; + clock-names = "dpaux", "parent"; + resets = <&tegra_car 181>; + reset-names = "dpaux"; + status = "disabled"; + }; + + isp@0,54600000 { + compatible = "nvidia,tegra210-isp"; + reg = <0x0 0x54600000 0x0 0x00040000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + isp@0,54680000 { + compatible = "nvidia,tegra210-isp"; + reg = <0x0 0x54680000 0x0 0x00040000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c@0,546c0000 { + compatible = "nvidia,tegra210-i2c-vi"; + reg = <0x0 0x546c0000 0x0 0x00040000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + gic: interrupt-controller@0,50041000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x50041000 0x0 0x1000>, + <0x0 0x50042000 0x0 0x2000>, + <0x0 0x50044000 0x0 0x2000>, + <0x0 0x50046000 0x0 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-parent = <&gic>; + }; + + gpu@0,57000000 { + compatible = "nvidia,gm20b"; + reg = <0x0 0x57000000 0x0 0x01000000>, + <0x0 0x58000000 0x0 0x01000000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "stall", "nonstall"; + clocks = <&tegra_car TEGRA210_CLK_GPU>, + <&tegra_car TEGRA210_CLK_PLL_P_OUT5>; + clock-names = "gpu", "pwr"; + resets = <&tegra_car 184>; + reset-names = "gpu"; + status = "disabled"; + }; + + lic: interrupt-controller@0,60004000 { + compatible = "nvidia,tegra210-ictlr"; + reg = <0x0 0x60004000 0x0 0x40>, /* primary controller */ + <0x0 0x60004100 0x0 0x40>, /* secondary controller */ + <0x0 0x60004200 0x0 0x40>, /* tertiary controller */ + <0x0 0x60004300 0x0 0x40>, /* quaternary controller */ + <0x0 0x60004400 0x0 0x40>, /* quinary controller */ + <0x0 0x60004500 0x0 0x40>; /* senary controller */ + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + }; + + timer@0,60005000 { + compatible = "nvidia,tegra210-timer", "nvidia,tegra20-timer"; + reg = <0x0 0x60005000 0x0 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_TIMER>; + clock-names = "timer"; + }; + + tegra_car: clock@0,60006000 { + compatible = "nvidia,tegra210-car"; + reg = <0x0 0x60006000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + flow-controller@0,60007000 { + compatible = "nvidia,tegra210-flowctrl"; + reg = <0x0 0x60007000 0x0 0x1000>; + }; + + gpio: gpio@0,6000d000 { + compatible = "nvidia,tegra210-gpio", "nvidia,tegra124-gpio", "nvidia,tegra30-gpio"; + reg = <0x0 0x6000d000 0x0 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + apbdma: dma@0,60020000 { + compatible = "nvidia,tegra210-apbdma", "nvidia,tegra148-apbdma"; + reg = <0x0 0x60020000 0x0 0x1400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_APBDMA>; + clock-names = "dma"; + resets = <&tegra_car 34>; + reset-names = "dma"; + #dma-cells = <1>; + }; + + apbmisc@0,70000800 { + compatible = "nvidia,tegra210-apbmisc", "nvidia,tegra20-apbmisc"; + reg = <0x0 0x70000800 0x0 0x64>, /* Chip revision */ + <0x0 0x7000e864 0x0 0x04>; /* Strapping options */ + }; + + pinmux: pinmux@0,700008d4 { + compatible = "nvidia,tegra210-pinmux"; + reg = <0x0 0x700008d4 0x0 0x29c>, /* Pad control registers */ + <0x0 0x70003000 0x0 0x294>; /* Mux registers */ + }; + + /* + * There are two serial driver i.e. 8250 based simple serial + * driver and APB DMA based serial driver for higher baudrate + * and performace. To enable the 8250 based driver, the compatible + * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable + * the APB DMA based serial driver, the comptible is + * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart". + */ + uarta: serial@0,70006000 { + compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x70006000 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_UARTA>; + clock-names = "serial"; + resets = <&tegra_car 6>; + reset-names = "serial"; + dmas = <&apbdma 8>, <&apbdma 8>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uartb: serial@0,70006040 { + compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x70006040 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_UARTB>; + clock-names = "serial"; + resets = <&tegra_car 7>; + reset-names = "serial"; + dmas = <&apbdma 9>, <&apbdma 9>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uartc: serial@0,70006200 { + compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x70006200 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_UARTC>; + clock-names = "serial"; + resets = <&tegra_car 55>; + reset-names = "serial"; + dmas = <&apbdma 10>, <&apbdma 10>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uartd: serial@0,70006300 { + compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x70006300 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_UARTD>; + clock-names = "serial"; + resets = <&tegra_car 65>; + reset-names = "serial"; + dmas = <&apbdma 19>, <&apbdma 19>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + pwm: pwm@0,7000a000 { + compatible = "nvidia,tegra210-pwm", "nvidia,tegra20-pwm"; + reg = <0x0 0x7000a000 0x0 0x100>; + #pwm-cells = <2>; + clocks = <&tegra_car TEGRA210_CLK_PWM>; + clock-names = "pwm"; + resets = <&tegra_car 17>; + reset-names = "pwm"; + status = "disabled"; + }; + + i2c@0,7000c000 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c000 0x0 0x100>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_I2C1>; + clock-names = "div-clk"; + resets = <&tegra_car 12>; + reset-names = "i2c"; + dmas = <&apbdma 21>, <&apbdma 21>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@0,7000c400 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c400 0x0 0x100>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_I2C2>; + clock-names = "div-clk"; + resets = <&tegra_car 54>; + reset-names = "i2c"; + dmas = <&apbdma 22>, <&apbdma 22>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@0,7000c500 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c500 0x0 0x100>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_I2C3>; + clock-names = "div-clk"; + resets = <&tegra_car 67>; + reset-names = "i2c"; + dmas = <&apbdma 23>, <&apbdma 23>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@0,7000c700 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c700 0x0 0x100>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_I2C4>; + clock-names = "div-clk"; + resets = <&tegra_car 103>; + reset-names = "i2c"; + dmas = <&apbdma 26>, <&apbdma 26>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@0,7000d000 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000d000 0x0 0x100>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_I2C5>; + clock-names = "div-clk"; + resets = <&tegra_car 47>; + reset-names = "i2c"; + dmas = <&apbdma 24>, <&apbdma 24>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@0,7000d100 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000d100 0x0 0x100>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_I2C6>; + clock-names = "div-clk"; + resets = <&tegra_car 166>; + reset-names = "i2c"; + dmas = <&apbdma 30>, <&apbdma 30>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@0,7000d400 { + compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; + reg = <0x0 0x7000d400 0x0 0x200>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_SBC1>; + clock-names = "spi"; + resets = <&tegra_car 41>; + reset-names = "spi"; + dmas = <&apbdma 15>, <&apbdma 15>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@0,7000d600 { + compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; + reg = <0x0 0x7000d600 0x0 0x200>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_SBC2>; + clock-names = "spi"; + resets = <&tegra_car 44>; + reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@0,7000d800 { + compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; + reg = <0x0 0x7000d800 0x0 0x200>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_SBC3>; + clock-names = "spi"; + resets = <&tegra_car 46>; + reset-names = "spi"; + dmas = <&apbdma 17>, <&apbdma 17>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@0,7000da00 { + compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; + reg = <0x0 0x7000da00 0x0 0x200>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_SBC4>; + clock-names = "spi"; + resets = <&tegra_car 68>; + reset-names = "spi"; + dmas = <&apbdma 18>, <&apbdma 18>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + rtc@0,7000e000 { + compatible = "nvidia,tegra210-rtc", "nvidia,tegra20-rtc"; + reg = <0x0 0x7000e000 0x0 0x100>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_RTC>; + clock-names = "rtc"; + }; + + pmc: pmc@0,7000e400 { + compatible = "nvidia,tegra210-pmc"; + reg = <0x0 0x7000e400 0x0 0x400>; + clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; + + #power-domain-cells = <1>; + }; + + fuse@0,7000f800 { + compatible = "nvidia,tegra210-efuse"; + reg = <0x0 0x7000f800 0x0 0x400>; + clocks = <&tegra_car TEGRA210_CLK_FUSE>; + clock-names = "fuse"; + resets = <&tegra_car 39>; + reset-names = "fuse"; + }; + + mc: memory-controller@0,70019000 { + compatible = "nvidia,tegra210-mc"; + reg = <0x0 0x70019000 0x0 0x1000>; + clocks = <&tegra_car TEGRA210_CLK_MC>; + clock-names = "mc"; + + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + + #iommu-cells = <1>; + }; + + hda@0,70030000 { + compatible = "nvidia,tegra210-hda", "nvidia,tegra30-hda"; + reg = <0x0 0x70030000 0x0 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_HDA>, + <&tegra_car TEGRA210_CLK_HDA2HDMI>, + <&tegra_car TEGRA210_CLK_HDA2CODEC_2X>; + clock-names = "hda", "hda2hdmi", "hda2codec_2x"; + resets = <&tegra_car 125>, /* hda */ + <&tegra_car 128>, /* hda2hdmi */ + <&tegra_car 111>; /* hda2codec_2x */ + reset-names = "hda", "hda2hdmi", "hda2codec_2x"; + status = "disabled"; + }; + + sdhci@0,700b0000 { + compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; + reg = <0x0 0x700b0000 0x0 0x200>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_SDMMC1>; + clock-names = "sdhci"; + resets = <&tegra_car 14>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdhci@0,700b0200 { + compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; + reg = <0x0 0x700b0200 0x0 0x200>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_SDMMC2>; + clock-names = "sdhci"; + resets = <&tegra_car 9>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdhci@0,700b0400 { + compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; + reg = <0x0 0x700b0400 0x0 0x200>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_SDMMC3>; + clock-names = "sdhci"; + resets = <&tegra_car 69>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdhci@0,700b0600 { + compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; + reg = <0x0 0x700b0600 0x0 0x200>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_SDMMC4>; + clock-names = "sdhci"; + resets = <&tegra_car 15>; + reset-names = "sdhci"; + status = "disabled"; + }; + + mipi: mipi@0,700e3000 { + compatible = "nvidia,tegra210-mipi"; + reg = <0x0 0x700e3000 0x0 0x100>; + clocks = <&tegra_car TEGRA210_CLK_MIPI_CAL>; + clock-names = "mipi-cal"; + #nvidia,mipi-calibrate-cells = <1>; + }; + + spi@0,70410000 { + compatible = "nvidia,tegra210-qspi"; + reg = <0x0 0x70410000 0x0 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_QSPI>; + clock-names = "qspi"; + resets = <&tegra_car 211>; + reset-names = "qspi"; + dmas = <&apbdma 5>, <&apbdma 5>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + usb@0,7d000000 { + compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + reg = <0x0 0x7d000000 0x0 0x4000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA210_CLK_USBD>; + clock-names = "usb"; + resets = <&tegra_car 22>; + reset-names = "usb"; + nvidia,phy = <&phy1>; + status = "disabled"; + }; + + phy1: usb-phy@0,7d000000 { + compatible = "nvidia,tegra210-usb-phy", "nvidia,tegra30-usb-phy"; + reg = <0x0 0x7d000000 0x0 0x4000>, + <0x0 0x7d000000 0x0 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA210_CLK_USBD>, + <&tegra_car TEGRA210_CLK_PLL_U>, + <&tegra_car TEGRA210_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; + nvidia,hssync-start-delay = <0>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <9>; + nvidia,xcvr-lsfslew = <0>; + nvidia,xcvr-lsrslew = <3>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + nvidia,xcvr-hsslew = <12>; + nvidia,has-utmi-pad-registers; + status = "disabled"; + }; + + usb@0,7d004000 { + compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + reg = <0x0 0x7d004000 0x0 0x4000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA210_CLK_USB2>; + clock-names = "usb"; + resets = <&tegra_car 58>; + reset-names = "usb"; + nvidia,phy = <&phy2>; + status = "disabled"; + }; + + phy2: usb-phy@0,7d004000 { + compatible = "nvidia,tegra210-usb-phy", "nvidia,tegra30-usb-phy"; + reg = <0x0 0x7d004000 0x0 0x4000>, + <0x0 0x7d000000 0x0 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA210_CLK_USB2>, + <&tegra_car TEGRA210_CLK_PLL_U>, + <&tegra_car TEGRA210_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 58>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; + nvidia,hssync-start-delay = <0>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <9>; + nvidia,xcvr-lsfslew = <0>; + nvidia,xcvr-lsrslew = <3>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + nvidia,xcvr-hsslew = <12>; + status = "disabled"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <3>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; + }; +}; diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h index 74c132d901bd..6a8685051b67 100644 --- a/arch/ia64/include/asm/unistd.h +++ b/arch/ia64/include/asm/unistd.h @@ -11,7 +11,7 @@ -#define NR_syscalls 323 /* length of syscall table */ +#define NR_syscalls 324 /* length of syscall table */ /* * The following defines stop scripts/checksyscalls.sh from complaining about diff --git a/arch/ia64/include/uapi/asm/unistd.h b/arch/ia64/include/uapi/asm/unistd.h index 762edce7572e..41369a103838 100644 --- a/arch/ia64/include/uapi/asm/unistd.h +++ b/arch/ia64/include/uapi/asm/unistd.h @@ -336,5 +336,6 @@ #define __NR_membarrier 1344 #define __NR_kcmp 1345 #define __NR_mlock2 1346 +#define __NR_copy_file_range 1347 #endif /* _UAPI_ASM_IA64_UNISTD_H */ diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 534a74acb849..477c55e244ec 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1772,5 +1772,6 @@ sys_call_table: data8 sys_membarrier data8 sys_kcmp // 1345 data8 sys_mlock2 + data8 sys_copy_file_range .org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls diff --git a/arch/x86/include/asm/pmem.h b/arch/x86/include/asm/pmem.h index 1544fabcd7f9..c57fd1ea9689 100644 --- a/arch/x86/include/asm/pmem.h +++ b/arch/x86/include/asm/pmem.h @@ -67,18 +67,19 @@ static inline void arch_wmb_pmem(void) } /** - * __arch_wb_cache_pmem - write back a cache range with CLWB + * arch_wb_cache_pmem - write back a cache range with CLWB * @vaddr: virtual start address * @size: number of bytes to write back * * Write back a cache range using the CLWB (cache line write back) * instruction. This function requires explicit ordering with an - * arch_wmb_pmem() call. This API is internal to the x86 PMEM implementation. + * arch_wmb_pmem() call. */ -static inline void __arch_wb_cache_pmem(void *vaddr, size_t size) +static inline void arch_wb_cache_pmem(void __pmem *addr, size_t size) { u16 x86_clflush_size = boot_cpu_data.x86_clflush_size; unsigned long clflush_mask = x86_clflush_size - 1; + void *vaddr = (void __force *)addr; void *vend = vaddr + size; void *p; @@ -115,7 +116,7 @@ static inline size_t arch_copy_from_iter_pmem(void __pmem *addr, size_t bytes, len = copy_from_iter_nocache(vaddr, bytes, i); if (__iter_needs_pmem_wb(i)) - __arch_wb_cache_pmem(vaddr, bytes); + arch_wb_cache_pmem(addr, bytes); return len; } @@ -133,7 +134,7 @@ static inline void arch_clear_pmem(void __pmem *addr, size_t size) void *vaddr = (void __force *)addr; memset(vaddr, 0, size); - __arch_wb_cache_pmem(vaddr, size); + arch_wb_cache_pmem(addr, size); } static inline bool __arch_has_wmb_pmem(void) diff --git a/crypto/af_alg.c b/crypto/af_alg.c index a8e7aa3e257b..f5e18c2a4852 100644 --- a/crypto/af_alg.c +++ b/crypto/af_alg.c @@ -76,6 +76,8 @@ int af_alg_register_type(const struct af_alg_type *type) goto unlock; type->ops->owner = THIS_MODULE; + if (type->ops_nokey) + type->ops_nokey->owner = THIS_MODULE; node->type = type; list_add(&node->list, &alg_types); err = 0; @@ -125,6 +127,26 @@ int af_alg_release(struct socket *sock) } EXPORT_SYMBOL_GPL(af_alg_release); +void af_alg_release_parent(struct sock *sk) +{ + struct alg_sock *ask = alg_sk(sk); + unsigned int nokey = ask->nokey_refcnt; + bool last = nokey && !ask->refcnt; + + sk = ask->parent; + ask = alg_sk(sk); + + lock_sock(sk); + ask->nokey_refcnt -= nokey; + if (!last) + last = !--ask->refcnt; + release_sock(sk); + + if (last) + sock_put(sk); +} +EXPORT_SYMBOL_GPL(af_alg_release_parent); + static int alg_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) { const u32 forbidden = CRYPTO_ALG_INTERNAL; @@ -133,6 +155,7 @@ static int alg_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) struct sockaddr_alg *sa = (void *)uaddr; const struct af_alg_type *type; void *private; + int err; if (sock->state == SS_CONNECTED) return -EINVAL; @@ -160,16 +183,22 @@ static int alg_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) return PTR_ERR(private); } + err = -EBUSY; lock_sock(sk); + if (ask->refcnt | ask->nokey_refcnt) + goto unlock; swap(ask->type, type); swap(ask->private, private); + err = 0; + +unlock: release_sock(sk); alg_do_release(type, private); - return 0; + return err; } static int alg_setkey(struct sock *sk, char __user *ukey, @@ -202,11 +231,15 @@ static int alg_setsockopt(struct socket *sock, int level, int optname, struct sock *sk = sock->sk; struct alg_sock *ask = alg_sk(sk); const struct af_alg_type *type; - int err = -ENOPROTOOPT; + int err = -EBUSY; lock_sock(sk); + if (ask->refcnt) + goto unlock; + type = ask->type; + err = -ENOPROTOOPT; if (level != SOL_ALG || !type) goto unlock; @@ -238,6 +271,7 @@ int af_alg_accept(struct sock *sk, struct socket *newsock) struct alg_sock *ask = alg_sk(sk); const struct af_alg_type *type; struct sock *sk2; + unsigned int nokey; int err; lock_sock(sk); @@ -257,20 +291,29 @@ int af_alg_accept(struct sock *sk, struct socket *newsock) security_sk_clone(sk, sk2); err = type->accept(ask->private, sk2); - if (err) { - sk_free(sk2); + + nokey = err == -ENOKEY; + if (nokey && type->accept_nokey) + err = type->accept_nokey(ask->private, sk2); + + if (err) goto unlock; - } sk2->sk_family = PF_ALG; - sock_hold(sk); + if (nokey || !ask->refcnt++) + sock_hold(sk); + ask->nokey_refcnt += nokey; alg_sk(sk2)->parent = sk; alg_sk(sk2)->type = type; + alg_sk(sk2)->nokey_refcnt = nokey; newsock->ops = type->ops; newsock->state = SS_CONNECTED; + if (nokey) + newsock->ops = type->ops_nokey; + err = 0; unlock: diff --git a/crypto/ahash.c b/crypto/ahash.c index 9c1dc8d6106a..d19b52324cf5 100644 --- a/crypto/ahash.c +++ b/crypto/ahash.c @@ -451,6 +451,7 @@ static int crypto_ahash_init_tfm(struct crypto_tfm *tfm) struct ahash_alg *alg = crypto_ahash_alg(hash); hash->setkey = ahash_nosetkey; + hash->has_setkey = false; hash->export = ahash_no_export; hash->import = ahash_no_import; @@ -463,8 +464,10 @@ static int crypto_ahash_init_tfm(struct crypto_tfm *tfm) hash->finup = alg->finup ?: ahash_def_finup; hash->digest = alg->digest; - if (alg->setkey) + if (alg->setkey) { hash->setkey = alg->setkey; + hash->has_setkey = true; + } if (alg->export) hash->export = alg->export; if (alg->import) diff --git a/crypto/algif_hash.c b/crypto/algif_hash.c index b4c24fe3dcfb..608a7562839d 100644 --- a/crypto/algif_hash.c +++ b/crypto/algif_hash.c @@ -34,6 +34,11 @@ struct hash_ctx { struct ahash_request req; }; +struct algif_hash_tfm { + struct crypto_ahash *hash; + bool has_key; +}; + static int hash_sendmsg(struct socket *sock, struct msghdr *msg, size_t ignored) { @@ -235,19 +240,151 @@ static struct proto_ops algif_hash_ops = { .accept = hash_accept, }; +static int hash_check_key(struct socket *sock) +{ + int err = 0; + struct sock *psk; + struct alg_sock *pask; + struct algif_hash_tfm *tfm; + struct sock *sk = sock->sk; + struct alg_sock *ask = alg_sk(sk); + + lock_sock(sk); + if (ask->refcnt) + goto unlock_child; + + psk = ask->parent; + pask = alg_sk(ask->parent); + tfm = pask->private; + + err = -ENOKEY; + lock_sock_nested(psk, SINGLE_DEPTH_NESTING); + if (!tfm->has_key) + goto unlock; + + if (!pask->refcnt++) + sock_hold(psk); + + ask->refcnt = 1; + sock_put(psk); + + err = 0; + +unlock: + release_sock(psk); +unlock_child: + release_sock(sk); + + return err; +} + +static int hash_sendmsg_nokey(struct socket *sock, struct msghdr *msg, + size_t size) +{ + int err; + + err = hash_check_key(sock); + if (err) + return err; + + return hash_sendmsg(sock, msg, size); +} + +static ssize_t hash_sendpage_nokey(struct socket *sock, struct page *page, + int offset, size_t size, int flags) +{ + int err; + + err = hash_check_key(sock); + if (err) + return err; + + return hash_sendpage(sock, page, offset, size, flags); +} + +static int hash_recvmsg_nokey(struct socket *sock, struct msghdr *msg, + size_t ignored, int flags) +{ + int err; + + err = hash_check_key(sock); + if (err) + return err; + + return hash_recvmsg(sock, msg, ignored, flags); +} + +static int hash_accept_nokey(struct socket *sock, struct socket *newsock, + int flags) +{ + int err; + + err = hash_check_key(sock); + if (err) + return err; + + return hash_accept(sock, newsock, flags); +} + +static struct proto_ops algif_hash_ops_nokey = { + .family = PF_ALG, + + .connect = sock_no_connect, + .socketpair = sock_no_socketpair, + .getname = sock_no_getname, + .ioctl = sock_no_ioctl, + .listen = sock_no_listen, + .shutdown = sock_no_shutdown, + .getsockopt = sock_no_getsockopt, + .mmap = sock_no_mmap, + .bind = sock_no_bind, + .setsockopt = sock_no_setsockopt, + .poll = sock_no_poll, + + .release = af_alg_release, + .sendmsg = hash_sendmsg_nokey, + .sendpage = hash_sendpage_nokey, + .recvmsg = hash_recvmsg_nokey, + .accept = hash_accept_nokey, +}; + static void *hash_bind(const char *name, u32 type, u32 mask) { - return crypto_alloc_ahash(name, type, mask); + struct algif_hash_tfm *tfm; + struct crypto_ahash *hash; + + tfm = kzalloc(sizeof(*tfm), GFP_KERNEL); + if (!tfm) + return ERR_PTR(-ENOMEM); + + hash = crypto_alloc_ahash(name, type, mask); + if (IS_ERR(hash)) { + kfree(tfm); + return ERR_CAST(hash); + } + + tfm->hash = hash; + + return tfm; } static void hash_release(void *private) { - crypto_free_ahash(private); + struct algif_hash_tfm *tfm = private; + + crypto_free_ahash(tfm->hash); + kfree(tfm); } static int hash_setkey(void *private, const u8 *key, unsigned int keylen) { - return crypto_ahash_setkey(private, key, keylen); + struct algif_hash_tfm *tfm = private; + int err; + + err = crypto_ahash_setkey(tfm->hash, key, keylen); + tfm->has_key = !err; + + return err; } static void hash_sock_destruct(struct sock *sk) @@ -261,12 +398,14 @@ static void hash_sock_destruct(struct sock *sk) af_alg_release_parent(sk); } -static int hash_accept_parent(void *private, struct sock *sk) +static int hash_accept_parent_nokey(void *private, struct sock *sk) { struct hash_ctx *ctx; struct alg_sock *ask = alg_sk(sk); - unsigned len = sizeof(*ctx) + crypto_ahash_reqsize(private); - unsigned ds = crypto_ahash_digestsize(private); + struct algif_hash_tfm *tfm = private; + struct crypto_ahash *hash = tfm->hash; + unsigned len = sizeof(*ctx) + crypto_ahash_reqsize(hash); + unsigned ds = crypto_ahash_digestsize(hash); ctx = sock_kmalloc(sk, len, GFP_KERNEL); if (!ctx) @@ -286,7 +425,7 @@ static int hash_accept_parent(void *private, struct sock *sk) ask->private = ctx; - ahash_request_set_tfm(&ctx->req, private); + ahash_request_set_tfm(&ctx->req, hash); ahash_request_set_callback(&ctx->req, CRYPTO_TFM_REQ_MAY_BACKLOG, af_alg_complete, &ctx->completion); @@ -295,12 +434,24 @@ static int hash_accept_parent(void *private, struct sock *sk) return 0; } +static int hash_accept_parent(void *private, struct sock *sk) +{ + struct algif_hash_tfm *tfm = private; + + if (!tfm->has_key && crypto_ahash_has_setkey(tfm->hash)) + return -ENOKEY; + + return hash_accept_parent_nokey(private, sk); +} + static const struct af_alg_type algif_type_hash = { .bind = hash_bind, .release = hash_release, .setkey = hash_setkey, .accept = hash_accept_parent, + .accept_nokey = hash_accept_parent_nokey, .ops = &algif_hash_ops, + .ops_nokey = &algif_hash_ops_nokey, .name = "hash", .owner = THIS_MODULE }; diff --git a/crypto/algif_skcipher.c b/crypto/algif_skcipher.c index eaa9f9be5b87..38c1aa89d3a0 100644 --- a/crypto/algif_skcipher.c +++ b/crypto/algif_skcipher.c @@ -31,6 +31,11 @@ struct skcipher_sg_list { struct scatterlist sg[0]; }; +struct skcipher_tfm { + struct crypto_skcipher *skcipher; + bool has_key; +}; + struct skcipher_ctx { struct list_head tsgl; struct af_alg_sgl rsgl; @@ -387,7 +392,8 @@ static int skcipher_sendmsg(struct socket *sock, struct msghdr *msg, sgl = list_entry(ctx->tsgl.prev, struct skcipher_sg_list, list); sg = sgl->sg; - sg_unmark_end(sg + sgl->cur); + if (sgl->cur) + sg_unmark_end(sg + sgl->cur - 1); do { i = sgl->cur; plen = min_t(size_t, len, PAGE_SIZE); @@ -642,13 +648,6 @@ static int skcipher_recvmsg_sync(struct socket *sock, struct msghdr *msg, lock_sock(sk); while (msg_data_left(msg)) { - sgl = list_first_entry(&ctx->tsgl, - struct skcipher_sg_list, list); - sg = sgl->sg; - - while (!sg->length) - sg++; - if (!ctx->used) { err = skcipher_wait_for_data(sk, flags); if (err) @@ -669,6 +668,13 @@ static int skcipher_recvmsg_sync(struct socket *sock, struct msghdr *msg, if (!used) goto free; + sgl = list_first_entry(&ctx->tsgl, + struct skcipher_sg_list, list); + sg = sgl->sg; + + while (!sg->length) + sg++; + skcipher_request_set_crypt(&ctx->req, sg, ctx->rsgl.sg, used, ctx->iv); @@ -748,19 +754,139 @@ static struct proto_ops algif_skcipher_ops = { .poll = skcipher_poll, }; +static int skcipher_check_key(struct socket *sock) +{ + int err = 0; + struct sock *psk; + struct alg_sock *pask; + struct skcipher_tfm *tfm; + struct sock *sk = sock->sk; + struct alg_sock *ask = alg_sk(sk); + + lock_sock(sk); + if (ask->refcnt) + goto unlock_child; + + psk = ask->parent; + pask = alg_sk(ask->parent); + tfm = pask->private; + + err = -ENOKEY; + lock_sock_nested(psk, SINGLE_DEPTH_NESTING); + if (!tfm->has_key) + goto unlock; + + if (!pask->refcnt++) + sock_hold(psk); + + ask->refcnt = 1; + sock_put(psk); + + err = 0; + +unlock: + release_sock(psk); +unlock_child: + release_sock(sk); + + return err; +} + +static int skcipher_sendmsg_nokey(struct socket *sock, struct msghdr *msg, + size_t size) +{ + int err; + + err = skcipher_check_key(sock); + if (err) + return err; + + return skcipher_sendmsg(sock, msg, size); +} + +static ssize_t skcipher_sendpage_nokey(struct socket *sock, struct page *page, + int offset, size_t size, int flags) +{ + int err; + + err = skcipher_check_key(sock); + if (err) + return err; + + return skcipher_sendpage(sock, page, offset, size, flags); +} + +static int skcipher_recvmsg_nokey(struct socket *sock, struct msghdr *msg, + size_t ignored, int flags) +{ + int err; + + err = skcipher_check_key(sock); + if (err) + return err; + + return skcipher_recvmsg(sock, msg, ignored, flags); +} + +static struct proto_ops algif_skcipher_ops_nokey = { + .family = PF_ALG, + + .connect = sock_no_connect, + .socketpair = sock_no_socketpair, + .getname = sock_no_getname, + .ioctl = sock_no_ioctl, + .listen = sock_no_listen, + .shutdown = sock_no_shutdown, + .getsockopt = sock_no_getsockopt, + .mmap = sock_no_mmap, + .bind = sock_no_bind, + .accept = sock_no_accept, + .setsockopt = sock_no_setsockopt, + + .release = af_alg_release, + .sendmsg = skcipher_sendmsg_nokey, + .sendpage = skcipher_sendpage_nokey, + .recvmsg = skcipher_recvmsg_nokey, + .poll = skcipher_poll, +}; + static void *skcipher_bind(const char *name, u32 type, u32 mask) { - return crypto_alloc_skcipher(name, type, mask); + struct skcipher_tfm *tfm; + struct crypto_skcipher *skcipher; + + tfm = kzalloc(sizeof(*tfm), GFP_KERNEL); + if (!tfm) + return ERR_PTR(-ENOMEM); + + skcipher = crypto_alloc_skcipher(name, type, mask); + if (IS_ERR(skcipher)) { + kfree(tfm); + return ERR_CAST(skcipher); + } + + tfm->skcipher = skcipher; + + return tfm; } static void skcipher_release(void *private) { - crypto_free_skcipher(private); + struct skcipher_tfm *tfm = private; + + crypto_free_skcipher(tfm->skcipher); + kfree(tfm); } static int skcipher_setkey(void *private, const u8 *key, unsigned int keylen) { - return crypto_skcipher_setkey(private, key, keylen); + struct skcipher_tfm *tfm = private; + int err; + + err = crypto_skcipher_setkey(tfm->skcipher, key, keylen); + tfm->has_key = !err; + + return err; } static void skcipher_wait(struct sock *sk) @@ -788,24 +914,26 @@ static void skcipher_sock_destruct(struct sock *sk) af_alg_release_parent(sk); } -static int skcipher_accept_parent(void *private, struct sock *sk) +static int skcipher_accept_parent_nokey(void *private, struct sock *sk) { struct skcipher_ctx *ctx; struct alg_sock *ask = alg_sk(sk); - unsigned int len = sizeof(*ctx) + crypto_skcipher_reqsize(private); + struct skcipher_tfm *tfm = private; + struct crypto_skcipher *skcipher = tfm->skcipher; + unsigned int len = sizeof(*ctx) + crypto_skcipher_reqsize(skcipher); ctx = sock_kmalloc(sk, len, GFP_KERNEL); if (!ctx) return -ENOMEM; - ctx->iv = sock_kmalloc(sk, crypto_skcipher_ivsize(private), + ctx->iv = sock_kmalloc(sk, crypto_skcipher_ivsize(skcipher), GFP_KERNEL); if (!ctx->iv) { sock_kfree_s(sk, ctx, len); return -ENOMEM; } - memset(ctx->iv, 0, crypto_skcipher_ivsize(private)); + memset(ctx->iv, 0, crypto_skcipher_ivsize(skcipher)); INIT_LIST_HEAD(&ctx->tsgl); ctx->len = len; @@ -818,7 +946,7 @@ static int skcipher_accept_parent(void *private, struct sock *sk) ask->private = ctx; - skcipher_request_set_tfm(&ctx->req, private); + skcipher_request_set_tfm(&ctx->req, skcipher); skcipher_request_set_callback(&ctx->req, CRYPTO_TFM_REQ_MAY_BACKLOG, af_alg_complete, &ctx->completion); @@ -827,12 +955,24 @@ static int skcipher_accept_parent(void *private, struct sock *sk) return 0; } +static int skcipher_accept_parent(void *private, struct sock *sk) +{ + struct skcipher_tfm *tfm = private; + + if (!tfm->has_key && crypto_skcipher_has_setkey(tfm->skcipher)) + return -ENOKEY; + + return skcipher_accept_parent_nokey(private, sk); +} + static const struct af_alg_type algif_type_skcipher = { .bind = skcipher_bind, .release = skcipher_release, .setkey = skcipher_setkey, .accept = skcipher_accept_parent, + .accept_nokey = skcipher_accept_parent_nokey, .ops = &algif_skcipher_ops, + .ops_nokey = &algif_skcipher_ops_nokey, .name = "skcipher", .owner = THIS_MODULE }; diff --git a/crypto/crc32c_generic.c b/crypto/crc32c_generic.c index 06f1b60f02b2..4c0a0e271876 100644 --- a/crypto/crc32c_generic.c +++ b/crypto/crc32c_generic.c @@ -172,4 +172,3 @@ MODULE_DESCRIPTION("CRC32c (Castagnoli) calculations wrapper for lib/crc32c"); MODULE_LICENSE("GPL"); MODULE_ALIAS_CRYPTO("crc32c"); MODULE_ALIAS_CRYPTO("crc32c-generic"); -MODULE_SOFTDEP("pre: crc32c"); diff --git a/crypto/shash.c b/crypto/shash.c index ecb1e3d39bf0..88a27de79848 100644 --- a/crypto/shash.c +++ b/crypto/shash.c @@ -355,8 +355,10 @@ int crypto_init_shash_ops_async(struct crypto_tfm *tfm) crt->finup = shash_async_finup; crt->digest = shash_async_digest; - if (alg->setkey) + if (alg->setkey) { crt->setkey = shash_async_setkey; + crt->has_setkey = true; + } if (alg->export) crt->export = shash_async_export; if (alg->import) diff --git a/crypto/skcipher.c b/crypto/skcipher.c index 7591928be7ca..d199c0b1751c 100644 --- a/crypto/skcipher.c +++ b/crypto/skcipher.c @@ -118,6 +118,7 @@ static int crypto_init_skcipher_ops_blkcipher(struct crypto_tfm *tfm) skcipher->decrypt = skcipher_decrypt_blkcipher; skcipher->ivsize = crypto_blkcipher_ivsize(blkcipher); + skcipher->has_setkey = calg->cra_blkcipher.max_keysize; return 0; } @@ -210,6 +211,7 @@ static int crypto_init_skcipher_ops_ablkcipher(struct crypto_tfm *tfm) skcipher->ivsize = crypto_ablkcipher_ivsize(ablkcipher); skcipher->reqsize = crypto_ablkcipher_reqsize(ablkcipher) + sizeof(struct ablkcipher_request); + skcipher->has_setkey = calg->cra_ablkcipher.max_keysize; return 0; } diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c index 6682c5daf742..6e6bc1059301 100644 --- a/drivers/acpi/apei/erst.c +++ b/drivers/acpi/apei/erst.c @@ -32,6 +32,7 @@ #include <linux/hardirq.h> #include <linux/pstore.h> #include <linux/vmalloc.h> +#include <linux/mm.h> /* kvfree() */ #include <acpi/apei.h> #include "apei-internal.h" @@ -532,10 +533,7 @@ retry: return -ENOMEM; memcpy(new_entries, entries, erst_record_id_cache.len * sizeof(entries[0])); - if (erst_record_id_cache.size < PAGE_SIZE) - kfree(entries); - else - vfree(entries); + kvfree(entries); erst_record_id_cache.entries = entries = new_entries; erst_record_id_cache.size = new_size; } diff --git a/drivers/amba/Kconfig b/drivers/amba/Kconfig index 4a5c9d279059..294ba6f36396 100644 --- a/drivers/amba/Kconfig +++ b/drivers/amba/Kconfig @@ -4,7 +4,7 @@ config ARM_AMBA if ARM_AMBA config TEGRA_AHB - bool "Enable AHB driver for NVIDIA Tegra SoCs" + bool default y if ARCH_TEGRA help Adds AHB configuration functionality for NVIDIA Tegra SoCs, diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c index 0dabc9b93725..92d6fc020a65 100644 --- a/drivers/block/drbd/drbd_bitmap.c +++ b/drivers/block/drbd/drbd_bitmap.c @@ -364,12 +364,9 @@ static void bm_free_pages(struct page **pages, unsigned long number) } } -static void bm_vk_free(void *ptr, int v) +static inline void bm_vk_free(void *ptr) { - if (v) - vfree(ptr); - else - kfree(ptr); + kvfree(ptr); } /* @@ -379,7 +376,7 @@ static struct page **bm_realloc_pages(struct drbd_bitmap *b, unsigned long want) { struct page **old_pages = b->bm_pages; struct page **new_pages, *page; - unsigned int i, bytes, vmalloced = 0; + unsigned int i, bytes; unsigned long have = b->bm_number_of_pages; BUG_ON(have == 0 && old_pages != NULL); @@ -401,7 +398,6 @@ static struct page **bm_realloc_pages(struct drbd_bitmap *b, unsigned long want) PAGE_KERNEL); if (!new_pages) return NULL; - vmalloced = 1; } if (want >= have) { @@ -411,7 +407,7 @@ static struct page **bm_realloc_pages(struct drbd_bitmap *b, unsigned long want) page = alloc_page(GFP_NOIO | __GFP_HIGHMEM); if (!page) { bm_free_pages(new_pages + have, i - have); - bm_vk_free(new_pages, vmalloced); + bm_vk_free(new_pages); return NULL; } /* we want to know which page it is @@ -427,11 +423,6 @@ static struct page **bm_realloc_pages(struct drbd_bitmap *b, unsigned long want) */ } - if (vmalloced) - b->bm_flags |= BM_P_VMALLOCED; - else - b->bm_flags &= ~BM_P_VMALLOCED; - return new_pages; } @@ -469,7 +460,7 @@ void drbd_bm_cleanup(struct drbd_device *device) if (!expect(device->bitmap)) return; bm_free_pages(device->bitmap->bm_pages, device->bitmap->bm_number_of_pages); - bm_vk_free(device->bitmap->bm_pages, (BM_P_VMALLOCED & device->bitmap->bm_flags)); + bm_vk_free(device->bitmap->bm_pages); kfree(device->bitmap); device->bitmap = NULL; } @@ -643,7 +634,6 @@ int drbd_bm_resize(struct drbd_device *device, sector_t capacity, int set_new_bi unsigned long want, have, onpages; /* number of pages */ struct page **npages, **opages = NULL; int err = 0, growing; - int opages_vmalloced; if (!expect(b)) return -ENOMEM; @@ -656,8 +646,6 @@ int drbd_bm_resize(struct drbd_device *device, sector_t capacity, int set_new_bi if (capacity == b->bm_dev_capacity) goto out; - opages_vmalloced = (BM_P_VMALLOCED & b->bm_flags); - if (capacity == 0) { spin_lock_irq(&b->bm_lock); opages = b->bm_pages; @@ -671,7 +659,7 @@ int drbd_bm_resize(struct drbd_device *device, sector_t capacity, int set_new_bi b->bm_dev_capacity = 0; spin_unlock_irq(&b->bm_lock); bm_free_pages(opages, onpages); - bm_vk_free(opages, opages_vmalloced); + bm_vk_free(opages); goto out; } bits = BM_SECT_TO_BIT(ALIGN(capacity, BM_SECT_PER_BIT)); @@ -744,7 +732,7 @@ int drbd_bm_resize(struct drbd_device *device, sector_t capacity, int set_new_bi spin_unlock_irq(&b->bm_lock); if (opages != npages) - bm_vk_free(opages, opages_vmalloced); + bm_vk_free(opages); if (!growing) b->bm_set = bm_count_bits(b); drbd_info(device, "resync bitmap: bits=%lu words=%lu pages=%lu\n", bits, words, want); diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index b6844feb9f9b..34bc84efc29e 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -536,9 +536,6 @@ struct drbd_bitmap; /* opaque for drbd_device */ /* definition of bits in bm_flags to be used in drbd_bm_lock * and drbd_bitmap_io and friends. */ enum bm_flag { - /* do we need to kfree, or vfree bm_pages? */ - BM_P_VMALLOCED = 0x10000, /* internal use only, will be masked out */ - /* currently locked for bulk operation */ BM_LOCKED_MASK = 0xf, diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c index f1d7fa45c275..f3f92d5fcda0 100644 --- a/drivers/char/mspec.c +++ b/drivers/char/mspec.c @@ -93,14 +93,11 @@ struct vma_data { spinlock_t lock; /* Serialize access to this structure. */ int count; /* Number of pages allocated. */ enum mspec_page_type type; /* Type of pages allocated. */ - int flags; /* See VMD_xxx below. */ unsigned long vm_start; /* Original (unsplit) base. */ unsigned long vm_end; /* Original (unsplit) end. */ unsigned long maddr[0]; /* Array of MSPEC addresses. */ }; -#define VMD_VMALLOCED 0x1 /* vmalloc'd rather than kmalloc'd */ - /* used on shub2 to clear FOP cache in the HUB */ static unsigned long scratch_page[MAX_NUMNODES]; #define SH2_AMO_CACHE_ENTRIES 4 @@ -185,10 +182,7 @@ mspec_close(struct vm_area_struct *vma) "failed to zero page %ld\n", my_page); } - if (vdata->flags & VMD_VMALLOCED) - vfree(vdata); - else - kfree(vdata); + kvfree(vdata); } /* @@ -256,7 +250,7 @@ mspec_mmap(struct file *file, struct vm_area_struct *vma, enum mspec_page_type type) { struct vma_data *vdata; - int pages, vdata_size, flags = 0; + int pages, vdata_size; if (vma->vm_pgoff != 0) return -EINVAL; @@ -271,16 +265,13 @@ mspec_mmap(struct file *file, struct vm_area_struct *vma, vdata_size = sizeof(struct vma_data) + pages * sizeof(long); if (vdata_size <= PAGE_SIZE) vdata = kzalloc(vdata_size, GFP_KERNEL); - else { + else vdata = vzalloc(vdata_size); - flags = VMD_VMALLOCED; - } if (!vdata) return -ENOMEM; vdata->vm_start = vma->vm_start; vdata->vm_end = vma->vm_end; - vdata->flags = flags; vdata->type = type; spin_lock_init(&vdata->lock); atomic_set(&vdata->refcnt, 1); diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index 3dd69df9c970..07d494276aad 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -381,6 +381,7 @@ config CRYPTO_DEV_BFIN_CRC config CRYPTO_DEV_ATMEL_AES tristate "Support for Atmel AES hw accelerator" + depends on HAS_DMA depends on AT_XDMAC || AT_HDMAC || COMPILE_TEST select CRYPTO_AES select CRYPTO_AEAD diff --git a/drivers/crypto/atmel-aes.c b/drivers/crypto/atmel-aes.c index 5621612ee921..6dd3317ca365 100644 --- a/drivers/crypto/atmel-aes.c +++ b/drivers/crypto/atmel-aes.c @@ -280,6 +280,7 @@ static const char *atmel_aes_reg_name(u32 offset, char *tmp, size_t sz) case AES_GCMHR(2): case AES_GCMHR(3): snprintf(tmp, sz, "GCMHR[%u]", (offset - AES_GCMHR(0)) >> 2); + break; default: snprintf(tmp, sz, "0x%02x", offset); diff --git a/drivers/crypto/qat/qat_common/qat_hal.c b/drivers/crypto/qat/qat_common/qat_hal.c index 0ac0ba867611..1e480f140663 100644 --- a/drivers/crypto/qat/qat_common/qat_hal.c +++ b/drivers/crypto/qat/qat_common/qat_hal.c @@ -389,7 +389,7 @@ static int qat_hal_check_ae_alive(struct icp_qat_fw_loader_handle *handle) { unsigned int base_cnt, cur_cnt; unsigned char ae; - unsigned int times = MAX_RETRY_TIMES; + int times = MAX_RETRY_TIMES; for (ae = 0; ae < handle->hal_handle->ae_max_num; ae++) { qat_hal_rd_ae_csr(handle, ae, PROFILE_COUNT, @@ -402,7 +402,7 @@ static int qat_hal_check_ae_alive(struct icp_qat_fw_loader_handle *handle) cur_cnt &= 0xffff; } while (times-- && (cur_cnt == base_cnt)); - if (!times) { + if (times < 0) { pr_err("QAT: AE%d is inactive!!\n", ae); return -EFAULT; } @@ -453,7 +453,11 @@ static int qat_hal_init_esram(struct icp_qat_fw_loader_handle *handle) void __iomem *csr_addr = (void __iomem *)((uintptr_t)handle->hal_ep_csr_addr_v + ESRAM_AUTO_INIT_CSR_OFFSET); - unsigned int csr_val, times = 30; + unsigned int csr_val; + int times = 30; + + if (handle->pci_dev->device == ADF_C3XXX_PCI_DEVICE_ID) + return 0; csr_val = ADF_CSR_RD(csr_addr, 0); if ((csr_val & ESRAM_AUTO_TINIT) && (csr_val & ESRAM_AUTO_TINIT_DONE)) @@ -467,7 +471,7 @@ static int qat_hal_init_esram(struct icp_qat_fw_loader_handle *handle) qat_hal_wait_cycles(handle, 0, ESRAM_AUTO_INIT_USED_CYCLES, 0); csr_val = ADF_CSR_RD(csr_addr, 0); } while (!(csr_val & ESRAM_AUTO_TINIT_DONE) && times--); - if ((!times)) { + if ((times < 0)) { pr_err("QAT: Fail to init eSram!\n"); return -EFAULT; } @@ -658,7 +662,7 @@ static int qat_hal_clear_gpr(struct icp_qat_fw_loader_handle *handle) ret = qat_hal_wait_cycles(handle, ae, 20, 1); } while (ret && times--); - if (!times) { + if (times < 0) { pr_err("QAT: clear GPR of AE %d failed", ae); return -EINVAL; } @@ -693,14 +697,12 @@ int qat_hal_init(struct adf_accel_dev *accel_dev) struct adf_hw_device_data *hw_data = accel_dev->hw_device; struct adf_bar *misc_bar = &pci_info->pci_bars[hw_data->get_misc_bar_id(hw_data)]; - struct adf_bar *sram_bar = - &pci_info->pci_bars[hw_data->get_sram_bar_id(hw_data)]; + struct adf_bar *sram_bar; handle = kzalloc(sizeof(*handle), GFP_KERNEL); if (!handle) return -ENOMEM; - handle->hal_sram_addr_v = sram_bar->virt_addr; handle->hal_cap_g_ctl_csr_addr_v = (void __iomem *)((uintptr_t)misc_bar->virt_addr + ICP_QAT_CAP_OFFSET); @@ -714,6 +716,11 @@ int qat_hal_init(struct adf_accel_dev *accel_dev) (void __iomem *)((uintptr_t)handle->hal_cap_ae_xfer_csr_addr_v + LOCAL_TO_XFER_REG_OFFSET); handle->pci_dev = pci_info->pci_dev; + if (handle->pci_dev->device != ADF_C3XXX_PCI_DEVICE_ID) { + sram_bar = + &pci_info->pci_bars[hw_data->get_sram_bar_id(hw_data)]; + handle->hal_sram_addr_v = sram_bar->virt_addr; + } handle->fw_auth = (handle->pci_dev->device == ADF_DH895XCC_PCI_DEVICE_ID) ? false : true; handle->hal_handle = kzalloc(sizeof(*handle->hal_handle), GFP_KERNEL); diff --git a/drivers/gpu/drm/drm_hashtab.c b/drivers/gpu/drm/drm_hashtab.c index c3b80fd65d62..7b30b307674b 100644 --- a/drivers/gpu/drm/drm_hashtab.c +++ b/drivers/gpu/drm/drm_hashtab.c @@ -198,10 +198,7 @@ EXPORT_SYMBOL(drm_ht_remove_item); void drm_ht_remove(struct drm_open_hash *ht) { if (ht->table) { - if ((PAGE_SIZE / sizeof(*ht->table)) >> ht->order) - kfree(ht->table); - else - vfree(ht->table); + kvfree(ht->table); ht->table = NULL; } } diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index fd4100d56d8c..6727954ab74b 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -76,10 +76,13 @@ */ #include <linux/kernel.h> +#include <linux/input.h> +#include <linux/rcupdate.h> #include <linux/slab.h> #include <linux/stat.h> #include <linux/module.h> #include <linux/usb/input.h> +#include <linux/usb/quirks.h> #define DRIVER_AUTHOR "Marko Friedemann <mfr@bmx-chemnitz.de>" #define DRIVER_DESC "X-Box pad driver" @@ -125,7 +128,7 @@ static const struct xpad_device { { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX }, { 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 }, { 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE }, - { 0x045e, 0x02dd, "Microsoft X-Box One pad (Covert Forces)", 0, XTYPE_XBOXONE }, + { 0x045e, 0x02dd, "Microsoft X-Box One pad (Firmware 2015)", 0, XTYPE_XBOXONE }, { 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W }, { 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W }, { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX }, @@ -317,21 +320,42 @@ static struct usb_device_id xpad_table[] = { MODULE_DEVICE_TABLE(usb, xpad_table); +struct xpad_output_packet { + u8 data[XPAD_PKT_LEN]; + u8 len; + bool pending; +}; + +#define XPAD_OUT_CMD_IDX 0 +#define XPAD_OUT_FF_IDX 1 +#define XPAD_OUT_LED_IDX (1 + IS_ENABLED(CONFIG_JOYSTICK_XPAD_FF)) +#define XPAD_NUM_OUT_PACKETS (1 + \ + IS_ENABLED(CONFIG_JOYSTICK_XPAD_FF) + \ + IS_ENABLED(CONFIG_JOYSTICK_XPAD_LEDS)) + struct usb_xpad { struct input_dev *dev; /* input device interface */ + struct input_dev __rcu *x360w_dev; struct usb_device *udev; /* usb device */ struct usb_interface *intf; /* usb interface */ - int pad_present; + bool pad_present; + bool input_created; struct urb *irq_in; /* urb for interrupt in report */ unsigned char *idata; /* input data */ dma_addr_t idata_dma; struct urb *irq_out; /* urb for interrupt out report */ + struct usb_anchor irq_out_anchor; + bool irq_out_active; /* we must not use an active URB */ + u8 odata_serial; /* serial number for xbox one protocol */ unsigned char *odata; /* output data */ dma_addr_t odata_dma; - struct mutex odata_mutex; + spinlock_t odata_lock; + + struct xpad_output_packet out_packets[XPAD_NUM_OUT_PACKETS]; + int last_out_packet; #if defined(CONFIG_JOYSTICK_XPAD_LEDS) struct xpad_led *led; @@ -343,8 +367,12 @@ struct usb_xpad { int xtype; /* type of xbox device */ int pad_nr; /* the order x360 pads were attached */ const char *name; /* name of the device */ + struct work_struct work; /* init/remove device from callback */ }; +static int xpad_init_input(struct usb_xpad *xpad); +static void xpad_deinit_input(struct usb_xpad *xpad); + /* * xpad_process_packet * @@ -424,11 +452,9 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d * http://www.free60.org/wiki/Gamepad */ -static void xpad360_process_packet(struct usb_xpad *xpad, +static void xpad360_process_packet(struct usb_xpad *xpad, struct input_dev *dev, u16 cmd, unsigned char *data) { - struct input_dev *dev = xpad->dev; - /* digital pad */ if (xpad->mapping & MAP_DPAD_TO_BUTTONS) { /* dpad as buttons (left, right, up, down) */ @@ -495,7 +521,30 @@ static void xpad360_process_packet(struct usb_xpad *xpad, input_sync(dev); } -static void xpad_identify_controller(struct usb_xpad *xpad); +static void xpad_presence_work(struct work_struct *work) +{ + struct usb_xpad *xpad = container_of(work, struct usb_xpad, work); + int error; + + if (xpad->pad_present) { + error = xpad_init_input(xpad); + if (error) { + /* complain only, not much else we can do here */ + dev_err(&xpad->dev->dev, + "unable to init device: %d\n", error); + } else { + rcu_assign_pointer(xpad->x360w_dev, xpad->dev); + } + } else { + RCU_INIT_POINTER(xpad->x360w_dev, NULL); + synchronize_rcu(); + /* + * Now that we are sure xpad360w_process_packet is not + * using input device we can get rid of it. + */ + xpad_deinit_input(xpad); + } +} /* * xpad360w_process_packet @@ -513,24 +562,28 @@ static void xpad_identify_controller(struct usb_xpad *xpad); */ static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data) { + struct input_dev *dev; + bool present; + /* Presence change */ if (data[0] & 0x08) { - if (data[1] & 0x80) { - xpad->pad_present = 1; - /* - * Light up the segment corresponding to - * controller number. - */ - xpad_identify_controller(xpad); - } else - xpad->pad_present = 0; + present = (data[1] & 0x80) != 0; + + if (xpad->pad_present != present) { + xpad->pad_present = present; + schedule_work(&xpad->work); + } } /* Valid pad data */ - if (!(data[1] & 0x1)) + if (data[1] != 0x1) return; - xpad360_process_packet(xpad, cmd, &data[4]); + rcu_read_lock(); + dev = rcu_dereference(xpad->x360w_dev); + if (dev) + xpad360_process_packet(xpad, dev, cmd, &data[4]); + rcu_read_unlock(); } /* @@ -659,7 +712,7 @@ static void xpad_irq_in(struct urb *urb) switch (xpad->xtype) { case XTYPE_XBOX360: - xpad360_process_packet(xpad, 0, xpad->idata); + xpad360_process_packet(xpad, xpad->dev, 0, xpad->idata); break; case XTYPE_XBOX360W: xpad360w_process_packet(xpad, 0, xpad->idata); @@ -678,18 +731,73 @@ exit: __func__, retval); } +/* Callers must hold xpad->odata_lock spinlock */ +static bool xpad_prepare_next_out_packet(struct usb_xpad *xpad) +{ + struct xpad_output_packet *pkt, *packet = NULL; + int i; + + for (i = 0; i < XPAD_NUM_OUT_PACKETS; i++) { + if (++xpad->last_out_packet >= XPAD_NUM_OUT_PACKETS) + xpad->last_out_packet = 0; + + pkt = &xpad->out_packets[xpad->last_out_packet]; + if (pkt->pending) { + dev_dbg(&xpad->intf->dev, + "%s - found pending output packet %d\n", + __func__, xpad->last_out_packet); + packet = pkt; + break; + } + } + + if (packet) { + memcpy(xpad->odata, packet->data, packet->len); + xpad->irq_out->transfer_buffer_length = packet->len; + return true; + } + + return false; +} + +/* Callers must hold xpad->odata_lock spinlock */ +static int xpad_try_sending_next_out_packet(struct usb_xpad *xpad) +{ + int error; + + if (!xpad->irq_out_active && xpad_prepare_next_out_packet(xpad)) { + usb_anchor_urb(xpad->irq_out, &xpad->irq_out_anchor); + error = usb_submit_urb(xpad->irq_out, GFP_ATOMIC); + if (error) { + dev_err(&xpad->intf->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, error); + usb_unanchor_urb(xpad->irq_out); + return -EIO; + } + + xpad->irq_out_active = true; + } + + return 0; +} + static void xpad_irq_out(struct urb *urb) { struct usb_xpad *xpad = urb->context; struct device *dev = &xpad->intf->dev; - int retval, status; + int status = urb->status; + int error; + unsigned long flags; - status = urb->status; + spin_lock_irqsave(&xpad->odata_lock, flags); switch (status) { case 0: /* success */ - return; + xpad->out_packets[xpad->last_out_packet].pending = false; + xpad->irq_out_active = xpad_prepare_next_out_packet(xpad); + break; case -ECONNRESET: case -ENOENT: @@ -697,19 +805,28 @@ static void xpad_irq_out(struct urb *urb) /* this urb is terminated, clean up */ dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); - return; + xpad->irq_out_active = false; + break; default: dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); - goto exit; + break; } -exit: - retval = usb_submit_urb(urb, GFP_ATOMIC); - if (retval) - dev_err(dev, "%s - usb_submit_urb failed with result %d\n", - __func__, retval); + if (xpad->irq_out_active) { + usb_anchor_urb(urb, &xpad->irq_out_anchor); + error = usb_submit_urb(urb, GFP_ATOMIC); + if (error) { + dev_err(dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, error); + usb_unanchor_urb(urb); + xpad->irq_out_active = false; + } + } + + spin_unlock_irqrestore(&xpad->odata_lock, flags); } static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) @@ -721,6 +838,8 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) if (xpad->xtype == XTYPE_UNKNOWN) return 0; + init_usb_anchor(&xpad->irq_out_anchor); + xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN, GFP_KERNEL, &xpad->odata_dma); if (!xpad->odata) { @@ -728,7 +847,7 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) goto fail1; } - mutex_init(&xpad->odata_mutex); + spin_lock_init(&xpad->odata_lock); xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL); if (!xpad->irq_out) { @@ -755,8 +874,14 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) static void xpad_stop_output(struct usb_xpad *xpad) { - if (xpad->xtype != XTYPE_UNKNOWN) - usb_kill_urb(xpad->irq_out); + if (xpad->xtype != XTYPE_UNKNOWN) { + if (!usb_wait_anchor_empty_timeout(&xpad->irq_out_anchor, + 5000)) { + dev_warn(&xpad->intf->dev, + "timed out waiting for output URB to complete, killing\n"); + usb_kill_anchored_urbs(&xpad->irq_out_anchor); + } + } } static void xpad_deinit_output(struct usb_xpad *xpad) @@ -770,27 +895,60 @@ static void xpad_deinit_output(struct usb_xpad *xpad) static int xpad_inquiry_pad_presence(struct usb_xpad *xpad) { + struct xpad_output_packet *packet = + &xpad->out_packets[XPAD_OUT_CMD_IDX]; + unsigned long flags; int retval; - mutex_lock(&xpad->odata_mutex); + spin_lock_irqsave(&xpad->odata_lock, flags); + + packet->data[0] = 0x08; + packet->data[1] = 0x00; + packet->data[2] = 0x0F; + packet->data[3] = 0xC0; + packet->data[4] = 0x00; + packet->data[5] = 0x00; + packet->data[6] = 0x00; + packet->data[7] = 0x00; + packet->data[8] = 0x00; + packet->data[9] = 0x00; + packet->data[10] = 0x00; + packet->data[11] = 0x00; + packet->len = 12; + packet->pending = true; + + /* Reset the sequence so we send out presence first */ + xpad->last_out_packet = -1; + retval = xpad_try_sending_next_out_packet(xpad); + + spin_unlock_irqrestore(&xpad->odata_lock, flags); - xpad->odata[0] = 0x08; - xpad->odata[1] = 0x00; - xpad->odata[2] = 0x0F; - xpad->odata[3] = 0xC0; - xpad->odata[4] = 0x00; - xpad->odata[5] = 0x00; - xpad->odata[6] = 0x00; - xpad->odata[7] = 0x00; - xpad->odata[8] = 0x00; - xpad->odata[9] = 0x00; - xpad->odata[10] = 0x00; - xpad->odata[11] = 0x00; - xpad->irq_out->transfer_buffer_length = 12; + return retval; +} + +static int xpad_start_xbox_one(struct usb_xpad *xpad) +{ + struct xpad_output_packet *packet = + &xpad->out_packets[XPAD_OUT_CMD_IDX]; + unsigned long flags; + int retval; - retval = usb_submit_urb(xpad->irq_out, GFP_KERNEL); + spin_lock_irqsave(&xpad->odata_lock, flags); - mutex_unlock(&xpad->odata_mutex); + /* Xbox one controller needs to be initialized. */ + packet->data[0] = 0x05; + packet->data[1] = 0x20; + packet->data[2] = xpad->odata_serial++; /* packet serial */ + packet->data[3] = 0x01; /* rumble bit enable? */ + packet->data[4] = 0x00; + packet->len = 5; + packet->pending = true; + + /* Reset the sequence so we send out start packet first */ + xpad->last_out_packet = -1; + retval = xpad_try_sending_next_out_packet(xpad); + + spin_unlock_irqrestore(&xpad->odata_lock, flags); return retval; } @@ -799,8 +957,11 @@ static int xpad_inquiry_pad_presence(struct usb_xpad *xpad) static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect) { struct usb_xpad *xpad = input_get_drvdata(dev); + struct xpad_output_packet *packet = &xpad->out_packets[XPAD_OUT_FF_IDX]; __u16 strong; __u16 weak; + int retval; + unsigned long flags; if (effect->type != FF_RUMBLE) return 0; @@ -808,69 +969,81 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect strong = effect->u.rumble.strong_magnitude; weak = effect->u.rumble.weak_magnitude; + spin_lock_irqsave(&xpad->odata_lock, flags); + switch (xpad->xtype) { case XTYPE_XBOX: - xpad->odata[0] = 0x00; - xpad->odata[1] = 0x06; - xpad->odata[2] = 0x00; - xpad->odata[3] = strong / 256; /* left actuator */ - xpad->odata[4] = 0x00; - xpad->odata[5] = weak / 256; /* right actuator */ - xpad->irq_out->transfer_buffer_length = 6; + packet->data[0] = 0x00; + packet->data[1] = 0x06; + packet->data[2] = 0x00; + packet->data[3] = strong / 256; /* left actuator */ + packet->data[4] = 0x00; + packet->data[5] = weak / 256; /* right actuator */ + packet->len = 6; + packet->pending = true; break; case XTYPE_XBOX360: - xpad->odata[0] = 0x00; - xpad->odata[1] = 0x08; - xpad->odata[2] = 0x00; - xpad->odata[3] = strong / 256; /* left actuator? */ - xpad->odata[4] = weak / 256; /* right actuator? */ - xpad->odata[5] = 0x00; - xpad->odata[6] = 0x00; - xpad->odata[7] = 0x00; - xpad->irq_out->transfer_buffer_length = 8; + packet->data[0] = 0x00; + packet->data[1] = 0x08; + packet->data[2] = 0x00; + packet->data[3] = strong / 256; /* left actuator? */ + packet->data[4] = weak / 256; /* right actuator? */ + packet->data[5] = 0x00; + packet->data[6] = 0x00; + packet->data[7] = 0x00; + packet->len = 8; + packet->pending = true; break; case XTYPE_XBOX360W: - xpad->odata[0] = 0x00; - xpad->odata[1] = 0x01; - xpad->odata[2] = 0x0F; - xpad->odata[3] = 0xC0; - xpad->odata[4] = 0x00; - xpad->odata[5] = strong / 256; - xpad->odata[6] = weak / 256; - xpad->odata[7] = 0x00; - xpad->odata[8] = 0x00; - xpad->odata[9] = 0x00; - xpad->odata[10] = 0x00; - xpad->odata[11] = 0x00; - xpad->irq_out->transfer_buffer_length = 12; + packet->data[0] = 0x00; + packet->data[1] = 0x01; + packet->data[2] = 0x0F; + packet->data[3] = 0xC0; + packet->data[4] = 0x00; + packet->data[5] = strong / 256; + packet->data[6] = weak / 256; + packet->data[7] = 0x00; + packet->data[8] = 0x00; + packet->data[9] = 0x00; + packet->data[10] = 0x00; + packet->data[11] = 0x00; + packet->len = 12; + packet->pending = true; break; case XTYPE_XBOXONE: - xpad->odata[0] = 0x09; /* activate rumble */ - xpad->odata[1] = 0x08; - xpad->odata[2] = 0x00; - xpad->odata[3] = 0x08; /* continuous effect */ - xpad->odata[4] = 0x00; /* simple rumble mode */ - xpad->odata[5] = 0x03; /* L and R actuator only */ - xpad->odata[6] = 0x00; /* TODO: LT actuator */ - xpad->odata[7] = 0x00; /* TODO: RT actuator */ - xpad->odata[8] = strong / 256; /* left actuator */ - xpad->odata[9] = weak / 256; /* right actuator */ - xpad->odata[10] = 0x80; /* length of pulse */ - xpad->odata[11] = 0x00; /* stop period of pulse */ - xpad->irq_out->transfer_buffer_length = 12; + packet->data[0] = 0x09; /* activate rumble */ + packet->data[1] = 0x08; + packet->data[2] = xpad->odata_serial++; + packet->data[3] = 0x08; /* continuous effect */ + packet->data[4] = 0x00; /* simple rumble mode */ + packet->data[5] = 0x03; /* L and R actuator only */ + packet->data[6] = 0x00; /* TODO: LT actuator */ + packet->data[7] = 0x00; /* TODO: RT actuator */ + packet->data[8] = strong / 512; /* left actuator */ + packet->data[9] = weak / 512; /* right actuator */ + packet->data[10] = 0x80; /* length of pulse */ + packet->data[11] = 0x00; /* stop period of pulse */ + packet->data[12] = 0x00; + packet->len = 13; + packet->pending = true; break; default: dev_dbg(&xpad->dev->dev, "%s - rumble command sent to unsupported xpad type: %d\n", __func__, xpad->xtype); - return -EINVAL; + retval = -EINVAL; + goto out; } - return usb_submit_urb(xpad->irq_out, GFP_ATOMIC); + retval = xpad_try_sending_next_out_packet(xpad); + +out: + spin_unlock_irqrestore(&xpad->odata_lock, flags); + return retval; } static int xpad_init_ff(struct usb_xpad *xpad) @@ -921,36 +1094,44 @@ struct xpad_led { */ static void xpad_send_led_command(struct usb_xpad *xpad, int command) { + struct xpad_output_packet *packet = + &xpad->out_packets[XPAD_OUT_LED_IDX]; + unsigned long flags; + command %= 16; - mutex_lock(&xpad->odata_mutex); + spin_lock_irqsave(&xpad->odata_lock, flags); switch (xpad->xtype) { case XTYPE_XBOX360: - xpad->odata[0] = 0x01; - xpad->odata[1] = 0x03; - xpad->odata[2] = command; - xpad->irq_out->transfer_buffer_length = 3; + packet->data[0] = 0x01; + packet->data[1] = 0x03; + packet->data[2] = command; + packet->len = 3; + packet->pending = true; break; + case XTYPE_XBOX360W: - xpad->odata[0] = 0x00; - xpad->odata[1] = 0x00; - xpad->odata[2] = 0x08; - xpad->odata[3] = 0x40 + command; - xpad->odata[4] = 0x00; - xpad->odata[5] = 0x00; - xpad->odata[6] = 0x00; - xpad->odata[7] = 0x00; - xpad->odata[8] = 0x00; - xpad->odata[9] = 0x00; - xpad->odata[10] = 0x00; - xpad->odata[11] = 0x00; - xpad->irq_out->transfer_buffer_length = 12; + packet->data[0] = 0x00; + packet->data[1] = 0x00; + packet->data[2] = 0x08; + packet->data[3] = 0x40 + command; + packet->data[4] = 0x00; + packet->data[5] = 0x00; + packet->data[6] = 0x00; + packet->data[7] = 0x00; + packet->data[8] = 0x00; + packet->data[9] = 0x00; + packet->data[10] = 0x00; + packet->data[11] = 0x00; + packet->len = 12; + packet->pending = true; break; } - usb_submit_urb(xpad->irq_out, GFP_KERNEL); - mutex_unlock(&xpad->odata_mutex); + xpad_try_sending_next_out_packet(xpad); + + spin_unlock_irqrestore(&xpad->odata_lock, flags); } /* @@ -959,7 +1140,7 @@ static void xpad_send_led_command(struct usb_xpad *xpad, int command) */ static void xpad_identify_controller(struct usb_xpad *xpad) { - xpad_send_led_command(xpad, (xpad->pad_nr % 4) + 2); + led_set_brightness(&xpad->led->led_cdev, (xpad->pad_nr % 4) + 2); } static void xpad_led_set(struct led_classdev *led_cdev, @@ -1001,14 +1182,7 @@ static int xpad_led_probe(struct usb_xpad *xpad) if (error) goto err_free_id; - if (xpad->xtype == XTYPE_XBOX360) { - /* - * Light up the segment corresponding to controller - * number on wired devices. On wireless we'll do that - * when they respond to "presence" packet. - */ - xpad_identify_controller(xpad); - } + xpad_identify_controller(xpad); return 0; @@ -1036,37 +1210,73 @@ static void xpad_led_disconnect(struct usb_xpad *xpad) { } static void xpad_identify_controller(struct usb_xpad *xpad) { } #endif -static int xpad_open(struct input_dev *dev) +static int xpad_start_input(struct usb_xpad *xpad) { - struct usb_xpad *xpad = input_get_drvdata(dev); - - /* URB was submitted in probe */ - if (xpad->xtype == XTYPE_XBOX360W) - return 0; + int error; - xpad->irq_in->dev = xpad->udev; if (usb_submit_urb(xpad->irq_in, GFP_KERNEL)) return -EIO; if (xpad->xtype == XTYPE_XBOXONE) { - /* Xbox one controller needs to be initialized. */ - xpad->odata[0] = 0x05; - xpad->odata[1] = 0x20; - xpad->irq_out->transfer_buffer_length = 2; - return usb_submit_urb(xpad->irq_out, GFP_KERNEL); + error = xpad_start_xbox_one(xpad); + if (error) { + usb_kill_urb(xpad->irq_in); + return error; + } } return 0; } -static void xpad_close(struct input_dev *dev) +static void xpad_stop_input(struct usb_xpad *xpad) { - struct usb_xpad *xpad = input_get_drvdata(dev); + usb_kill_urb(xpad->irq_in); +} + +static int xpad360w_start_input(struct usb_xpad *xpad) +{ + int error; - if (xpad->xtype != XTYPE_XBOX360W) + error = usb_submit_urb(xpad->irq_in, GFP_KERNEL); + if (error) + return -EIO; + + /* + * Send presence packet. + * This will force the controller to resend connection packets. + * This is useful in the case we activate the module after the + * adapter has been plugged in, as it won't automatically + * send us info about the controllers. + */ + error = xpad_inquiry_pad_presence(xpad); + if (error) { usb_kill_urb(xpad->irq_in); + return error; + } - xpad_stop_output(xpad); + return 0; +} + +static void xpad360w_stop_input(struct usb_xpad *xpad) +{ + usb_kill_urb(xpad->irq_in); + + /* Make sure we are done with presence work if it was scheduled */ + flush_work(&xpad->work); +} + +static int xpad_open(struct input_dev *dev) +{ + struct usb_xpad *xpad = input_get_drvdata(dev); + + return xpad_start_input(xpad); +} + +static void xpad_close(struct input_dev *dev) +{ + struct usb_xpad *xpad = input_get_drvdata(dev); + + xpad_stop_input(xpad); } static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs) @@ -1097,8 +1307,11 @@ static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs) static void xpad_deinit_input(struct usb_xpad *xpad) { - xpad_led_disconnect(xpad); - input_unregister_device(xpad->dev); + if (xpad->input_created) { + xpad->input_created = false; + xpad_led_disconnect(xpad); + input_unregister_device(xpad->dev); + } } static int xpad_init_input(struct usb_xpad *xpad) @@ -1118,8 +1331,10 @@ static int xpad_init_input(struct usb_xpad *xpad) input_set_drvdata(input_dev, xpad); - input_dev->open = xpad_open; - input_dev->close = xpad_close; + if (xpad->xtype != XTYPE_XBOX360W) { + input_dev->open = xpad_open; + input_dev->close = xpad_close; + } __set_bit(EV_KEY, input_dev->evbit); @@ -1181,6 +1396,7 @@ static int xpad_init_input(struct usb_xpad *xpad) if (error) goto err_disconnect_led; + xpad->input_created = true; return 0; err_disconnect_led: @@ -1241,6 +1457,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id xpad->mapping = xpad_device[i].mapping; xpad->xtype = xpad_device[i].xtype; xpad->name = xpad_device[i].name; + INIT_WORK(&xpad->work, xpad_presence_work); if (xpad->xtype == XTYPE_UNKNOWN) { if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) { @@ -1277,10 +1494,6 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id usb_set_intfdata(intf, xpad); - error = xpad_init_input(xpad); - if (error) - goto err_deinit_output; - if (xpad->xtype == XTYPE_XBOX360W) { /* * Submit the int URB immediately rather than waiting for open @@ -1289,28 +1502,24 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id * exactly the message that a controller has arrived that * we're waiting for. */ - xpad->irq_in->dev = xpad->udev; - error = usb_submit_urb(xpad->irq_in, GFP_KERNEL); + error = xpad360w_start_input(xpad); if (error) - goto err_deinit_input; - + goto err_deinit_output; /* - * Send presence packet. - * This will force the controller to resend connection packets. - * This is useful in the case we activate the module after the - * adapter has been plugged in, as it won't automatically - * send us info about the controllers. + * Wireless controllers require RESET_RESUME to work properly + * after suspend. Ideally this quirk should be in usb core + * quirk list, but we have too many vendors producing these + * controllers and we'd need to maintain 2 identical lists + * here in this driver and in usb core. */ - error = xpad_inquiry_pad_presence(xpad); + udev->quirks |= USB_QUIRK_RESET_RESUME; + } else { + error = xpad_init_input(xpad); if (error) - goto err_kill_in_urb; + goto err_deinit_output; } return 0; -err_kill_in_urb: - usb_kill_urb(xpad->irq_in); -err_deinit_input: - xpad_deinit_input(xpad); err_deinit_output: xpad_deinit_output(xpad); err_free_in_urb: @@ -1320,19 +1529,24 @@ err_free_idata: err_free_mem: kfree(xpad); return error; - } static void xpad_disconnect(struct usb_interface *intf) { - struct usb_xpad *xpad = usb_get_intfdata (intf); + struct usb_xpad *xpad = usb_get_intfdata(intf); + + if (xpad->xtype == XTYPE_XBOX360W) + xpad360w_stop_input(xpad); xpad_deinit_input(xpad); - xpad_deinit_output(xpad); - if (xpad->xtype == XTYPE_XBOX360W) { - usb_kill_urb(xpad->irq_in); - } + /* + * Now that both input device and LED device are gone we can + * stop output URB. + */ + xpad_stop_output(xpad); + + xpad_deinit_output(xpad); usb_free_urb(xpad->irq_in); usb_free_coherent(xpad->udev, XPAD_PKT_LEN, @@ -1343,10 +1557,55 @@ static void xpad_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); } +static int xpad_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct usb_xpad *xpad = usb_get_intfdata(intf); + struct input_dev *input = xpad->dev; + + if (xpad->xtype == XTYPE_XBOX360W) { + /* + * Wireless controllers always listen to input so + * they are notified when controller shows up + * or goes away. + */ + xpad360w_stop_input(xpad); + } else { + mutex_lock(&input->mutex); + if (input->users) + xpad_stop_input(xpad); + mutex_unlock(&input->mutex); + } + + xpad_stop_output(xpad); + + return 0; +} + +static int xpad_resume(struct usb_interface *intf) +{ + struct usb_xpad *xpad = usb_get_intfdata(intf); + struct input_dev *input = xpad->dev; + int retval = 0; + + if (xpad->xtype == XTYPE_XBOX360W) { + retval = xpad360w_start_input(xpad); + } else { + mutex_lock(&input->mutex); + if (input->users) + retval = xpad_start_input(xpad); + mutex_unlock(&input->mutex); + } + + return retval; +} + static struct usb_driver xpad_driver = { .name = "xpad", .probe = xpad_probe, .disconnect = xpad_disconnect, + .suspend = xpad_suspend, + .resume = xpad_resume, + .reset_resume = xpad_resume, .id_table = xpad_table, }; diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index b9f01bd1b7ef..29093657f2ef 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -630,7 +630,7 @@ gpio_keys_get_devtree_pdata(struct device *dev) if (!node) return ERR_PTR(-ENODEV); - nbuttons = of_get_child_count(node); + nbuttons = of_get_available_child_count(node); if (nbuttons == 0) return ERR_PTR(-ENODEV); @@ -645,8 +645,10 @@ gpio_keys_get_devtree_pdata(struct device *dev) pdata->rep = !!of_get_property(node, "autorepeat", NULL); + of_property_read_string(node, "label", &pdata->name); + i = 0; - for_each_child_of_node(node, pp) { + for_each_available_child_of_node(node, pp) { enum of_gpio_flags flags; button = &pdata->buttons[i++]; diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 2d5794ec338b..2160512e861a 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -113,8 +113,8 @@ struct t7_config { #define MXT_T9_DETECT (1 << 7) struct t9_range { - u16 x; - u16 y; + __le16 x; + __le16 y; } __packed; /* MXT_TOUCH_MULTI_T9 orient */ @@ -216,6 +216,7 @@ struct mxt_data { unsigned int irq; unsigned int max_x; unsigned int max_y; + bool xy_switch; bool in_bootloader; u16 mem_size; u8 t100_aux_ampl; @@ -1665,8 +1666,8 @@ static int mxt_read_t9_resolution(struct mxt_data *data) if (error) return error; - le16_to_cpus(&range.x); - le16_to_cpus(&range.y); + data->max_x = get_unaligned_le16(&range.x); + data->max_y = get_unaligned_le16(&range.y); error = __mxt_read_reg(client, object->start_address + MXT_T9_ORIENT, @@ -1674,23 +1675,7 @@ static int mxt_read_t9_resolution(struct mxt_data *data) if (error) return error; - /* Handle default values */ - if (range.x == 0) - range.x = 1023; - - if (range.y == 0) - range.y = 1023; - - if (orient & MXT_T9_ORIENT_SWITCH) { - data->max_x = range.y; - data->max_y = range.x; - } else { - data->max_x = range.x; - data->max_y = range.y; - } - - dev_dbg(&client->dev, - "Touchscreen size X%uY%u\n", data->max_x, data->max_y); + data->xy_switch = orient & MXT_T9_ORIENT_SWITCH; return 0; } @@ -1708,13 +1693,14 @@ static int mxt_read_t100_config(struct mxt_data *data) if (!object) return -EINVAL; + /* read touchscreen dimensions */ error = __mxt_read_reg(client, object->start_address + MXT_T100_XRANGE, sizeof(range_x), &range_x); if (error) return error; - le16_to_cpus(&range_x); + data->max_x = get_unaligned_le16(&range_x); error = __mxt_read_reg(client, object->start_address + MXT_T100_YRANGE, @@ -1722,36 +1708,24 @@ static int mxt_read_t100_config(struct mxt_data *data) if (error) return error; - le16_to_cpus(&range_y); + data->max_y = get_unaligned_le16(&range_y); + /* read orientation config */ error = __mxt_read_reg(client, object->start_address + MXT_T100_CFG1, 1, &cfg); if (error) return error; + data->xy_switch = cfg & MXT_T100_CFG_SWITCHXY; + + /* allocate aux bytes */ error = __mxt_read_reg(client, object->start_address + MXT_T100_TCHAUX, 1, &tchaux); if (error) return error; - /* Handle default values */ - if (range_x == 0) - range_x = 1023; - - if (range_y == 0) - range_y = 1023; - - if (cfg & MXT_T100_CFG_SWITCHXY) { - data->max_x = range_y; - data->max_y = range_x; - } else { - data->max_x = range_x; - data->max_y = range_y; - } - - /* allocate aux bytes */ aux = 6; if (tchaux & MXT_T100_TCHAUX_VECT) @@ -1767,9 +1741,6 @@ static int mxt_read_t100_config(struct mxt_data *data) "T100 aux mappings vect:%u ampl:%u area:%u\n", data->t100_aux_vect, data->t100_aux_ampl, data->t100_aux_area); - dev_info(&client->dev, - "T100 Touchscreen size X%uY%u\n", data->max_x, data->max_y); - return 0; } @@ -1828,6 +1799,19 @@ static int mxt_initialize_input_device(struct mxt_data *data) return -EINVAL; } + /* Handle default values and orientation switch */ + if (data->max_x == 0) + data->max_x = 1023; + + if (data->max_y == 0) + data->max_y = 1023; + + if (data->xy_switch) + swap(data->max_x, data->max_y); + + dev_info(dev, "Touchscreen size X%uY%u\n", data->max_x, data->max_y); + + /* Register input device */ input_dev = input_allocate_device(); if (!input_dev) { dev_err(dev, "Failed to allocate memory\n"); diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c index 154aced0b91b..65cc0ac9b82d 100644 --- a/drivers/mmc/core/debugfs.c +++ b/drivers/mmc/core/debugfs.c @@ -170,7 +170,7 @@ static int mmc_ios_show(struct seq_file *s, void *data) str = "invalid"; break; } - seq_printf(s, "signal voltage:\t%u (%s)\n", ios->chip_select, str); + seq_printf(s, "signal voltage:\t%u (%s)\n", ios->signal_voltage, str); switch (ios->drv_type) { case MMC_SET_DRIVER_TYPE_A: diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c index 2b16263458af..aba786daebca 100644 --- a/drivers/mmc/core/pwrseq_simple.c +++ b/drivers/mmc/core/pwrseq_simple.c @@ -29,15 +29,18 @@ struct mmc_pwrseq_simple { static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq, int value) { - int i; struct gpio_descs *reset_gpios = pwrseq->reset_gpios; - int values[reset_gpios->ndescs]; - for (i = 0; i < reset_gpios->ndescs; i++) - values[i] = value; + if (!IS_ERR(reset_gpios)) { + int i; + int values[reset_gpios->ndescs]; - gpiod_set_array_value_cansleep(reset_gpios->ndescs, reset_gpios->desc, - values); + for (i = 0; i < reset_gpios->ndescs; i++) + values[i] = value; + + gpiod_set_array_value_cansleep( + reset_gpios->ndescs, reset_gpios->desc, values); + } } static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host) @@ -79,7 +82,8 @@ static void mmc_pwrseq_simple_free(struct mmc_host *host) struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq, struct mmc_pwrseq_simple, pwrseq); - gpiod_put_array(pwrseq->reset_gpios); + if (!IS_ERR(pwrseq->reset_gpios)) + gpiod_put_array(pwrseq->reset_gpios); if (!IS_ERR(pwrseq->ext_clk)) clk_put(pwrseq->ext_clk); @@ -112,7 +116,9 @@ struct mmc_pwrseq *mmc_pwrseq_simple_alloc(struct mmc_host *host, } pwrseq->reset_gpios = gpiod_get_array(dev, "reset", GPIOD_OUT_HIGH); - if (IS_ERR(pwrseq->reset_gpios)) { + if (IS_ERR(pwrseq->reset_gpios) && + PTR_ERR(pwrseq->reset_gpios) != -ENOENT && + PTR_ERR(pwrseq->reset_gpios) != -ENOSYS) { ret = PTR_ERR(pwrseq->reset_gpios); goto clk_put; } diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index f2b164b214ae..bb39a29b2db6 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -329,6 +329,7 @@ static int mmc_read_switch(struct mmc_card *card) card->sw_caps.sd3_bus_mode = status[13]; /* Driver Strengths supported by the card */ card->sw_caps.sd3_drv_type = status[9]; + card->sw_caps.sd3_curr_limit = status[7] | status[6] << 8; } out: @@ -545,14 +546,25 @@ static int sd_set_current_limit(struct mmc_card *card, u8 *status) * when we set current limit to 200ma, the card will draw 200ma, and * when we set current limit to 400/600/800ma, the card will draw its * maximum 300ma from the host. + * + * The above is incorrect: if we try to set a current limit that is + * not supported by the card, the card can rightfully error out the + * attempt, and remain at the default current limit. This results + * in a 300mA card being limited to 200mA even though the host + * supports 800mA. Failures seen with SanDisk 8GB UHS cards with + * an iMX6 host. --rmk */ - if (max_current >= 800) + if (max_current >= 800 && + card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_800) current_limit = SD_SET_CURRENT_LIMIT_800; - else if (max_current >= 600) + else if (max_current >= 600 && + card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_600) current_limit = SD_SET_CURRENT_LIMIT_600; - else if (max_current >= 400) + else if (max_current >= 400 && + card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_400) current_limit = SD_SET_CURRENT_LIMIT_400; - else if (max_current >= 200) + else if (max_current >= 200 && + card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_200) current_limit = SD_SET_CURRENT_LIMIT_200; if (current_limit != SD_SET_CURRENT_NO_CHANGE) { @@ -626,9 +638,9 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card) * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104. */ if (!mmc_host_is_spi(card->host) && - (card->sd_bus_speed == UHS_SDR50_BUS_SPEED || - card->sd_bus_speed == UHS_DDR50_BUS_SPEED || - card->sd_bus_speed == UHS_SDR104_BUS_SPEED)) { + (card->host->ios.timing == MMC_TIMING_UHS_SDR50 || + card->host->ios.timing == MMC_TIMING_UHS_DDR50 || + card->host->ios.timing == MMC_TIMING_UHS_SDR104)) { err = mmc_execute_tuning(card); /* @@ -638,7 +650,7 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card) * difference between v3.00 and 3.01 spec means that CMD19 * tuning is also available for DDR50 mode. */ - if (err && card->sd_bus_speed == UHS_DDR50_BUS_SPEED) { + if (err && card->host->ios.timing == MMC_TIMING_UHS_DDR50) { pr_warn("%s: ddr50 tuning failed\n", mmc_hostname(card->host)); err = 0; diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index d61ba1a0495e..467b3cf80c44 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -535,8 +535,8 @@ static int mmc_sdio_init_uhs_card(struct mmc_card *card) * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104. */ if (!mmc_host_is_spi(card->host) && - ((card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR50) || - (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104))) + ((card->host->ios.timing == MMC_TIMING_UHS_SDR50) || + (card->host->ios.timing == MMC_TIMING_UHS_SDR104))) err = mmc_execute_tuning(card); out: return err; diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c index 8e94e555b788..6f6fc527a263 100644 --- a/drivers/mmc/core/sdio_cis.c +++ b/drivers/mmc/core/sdio_cis.c @@ -223,6 +223,7 @@ static const struct cis_tpl cis_tpl_list[] = { { 0x20, 4, cistpl_manfid }, { 0x21, 2, /* cistpl_funcid */ }, { 0x22, 0, cistpl_funce }, + { 0x91, 2, /* cistpl_sdio_std */ }, }; static int sdio_read_cis(struct mmc_card *card, struct sdio_func *func) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index fb266745f824..0d6ca4116f3d 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -151,6 +151,7 @@ static struct variant_data variant_nomadik = { .fifosize = 16 * 4, .fifohalfsize = 8 * 4, .clkreg = MCI_CLK_ENABLE, + .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS, .datalength_bits = 24, .datactrl_mask_sdio = MCI_ST_DPSM_SDIOEN, .st_sdio = true, @@ -1886,7 +1887,7 @@ static struct amba_id mmci_ids[] = { { .id = 0x00280180, .mask = 0x00ffffff, - .data = &variant_u300, + .data = &variant_nomadik, }, { .id = 0x00480180, diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c index e4b05dbb9ca8..4a0d6b80eaa3 100644 --- a/drivers/mmc/host/tmio_mmc_dma.c +++ b/drivers/mmc/host/tmio_mmc_dma.c @@ -94,9 +94,9 @@ static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) desc = NULL; ret = cookie; } + dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", + __func__, host->sg_len, ret, cookie, host->mrq); } - dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", - __func__, host->sg_len, ret, cookie, host->mrq); pio: if (!desc) { @@ -116,8 +116,8 @@ pio: "DMA failed: %d, falling back to PIO\n", ret); } - dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d, sg[%d]\n", __func__, - desc, cookie, host->sg_len); + dev_dbg(&host->pdev->dev, "%s(): desc %p, sg[%d]\n", __func__, + desc, host->sg_len); } static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) @@ -174,9 +174,9 @@ static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) desc = NULL; ret = cookie; } + dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", + __func__, host->sg_len, ret, cookie, host->mrq); } - dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", - __func__, host->sg_len, ret, cookie, host->mrq); pio: if (!desc) { @@ -196,8 +196,7 @@ pio: "DMA failed: %d, falling back to PIO\n", ret); } - dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d\n", __func__, - desc, cookie); + dev_dbg(&host->pdev->dev, "%s(): desc %p\n", __func__, desc); } void tmio_mmc_start_dma(struct tmio_mmc_host *host, diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c index 2940bd769936..25aba1613e21 100644 --- a/drivers/scsi/3w-xxxx.c +++ b/drivers/scsi/3w-xxxx.c @@ -1045,6 +1045,9 @@ static int tw_chrdev_open(struct inode *inode, struct file *file) static const struct file_operations tw_fops = { .owner = THIS_MODULE, .unlocked_ioctl = tw_chrdev_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = tw_chrdev_ioctl, +#endif .open = tw_chrdev_open, .release = NULL, .llseek = noop_llseek, diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index c1fe0d2f90ca..23d862dfdde3 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1620,23 +1620,6 @@ config ATARI_SCSI ST-DMA, replacing ACSI). It does NOT support other schemes, like in the Hades (without DMA). -config ATARI_SCSI_TOSHIBA_DELAY - bool "Long delays for Toshiba CD-ROMs" - depends on ATARI_SCSI - help - This option increases the delay after a SCSI arbitration to - accommodate some flaky Toshiba CD-ROM drives. Say Y if you intend to - use a Toshiba CD-ROM drive; otherwise, the option is not needed and - would impact performance a bit, so say N. - -config ATARI_SCSI_RESET_BOOT - bool "Reset SCSI-devices at boottime" - depends on ATARI_SCSI - help - Reset the devices on your Atari whenever it boots. This makes the - boot process fractionally longer but may assist recovery from errors - that leave the devices with SCSI operations partway completed. - config MAC_SCSI tristate "Macintosh NCR5380 SCSI" depends on MAC && SCSI=y diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index a777e5c412df..d72867257346 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -1,17 +1,17 @@ -/* +/* * NCR 5380 generic driver routines. These should make it *trivial* - * to implement 5380 SCSI drivers under Linux with a non-trantor - * architecture. + * to implement 5380 SCSI drivers under Linux with a non-trantor + * architecture. * - * Note that these routines also work with NR53c400 family chips. + * Note that these routines also work with NR53c400 family chips. * * Copyright 1993, Drew Eckhardt - * Visionary Computing - * (Unix and Linux consulting and custom programming) - * drew@colorado.edu - * +1 (303) 666-5836 + * Visionary Computing + * (Unix and Linux consulting and custom programming) + * drew@colorado.edu + * +1 (303) 666-5836 * - * For more information, please consult + * For more information, please consult * * NCR 5380 Family * SCSI Protocol Controller @@ -25,84 +25,28 @@ */ /* - * Revision 1.10 1998/9/2 Alan Cox - * (alan@lxorguk.ukuu.org.uk) - * Fixed up the timer lockups reported so far. Things still suck. Looking - * forward to 2.3 and per device request queues. Then it'll be possible to - * SMP thread this beast and improve life no end. - - * Revision 1.9 1997/7/27 Ronald van Cuijlenborg - * (ronald.van.cuijlenborg@tip.nl or nutty@dds.nl) - * (hopefully) fixed and enhanced USLEEP - * added support for DTC3181E card (for Mustek scanner) - * - - * Revision 1.8 Ingmar Baumgart - * (ingmar@gonzo.schwaben.de) - * added support for NCR53C400a card - * - - * Revision 1.7 1996/3/2 Ray Van Tassle (rayvt@comm.mot.com) - * added proc_info - * added support needed for DTC 3180/3280 - * fixed a couple of bugs - * - - * Revision 1.5 1994/01/19 09:14:57 drew - * Fixed udelay() hack that was being used on DATAOUT phases - * instead of a proper wait for the final handshake. - * - * Revision 1.4 1994/01/19 06:44:25 drew - * *** empty log message *** - * - * Revision 1.3 1994/01/19 05:24:40 drew - * Added support for TCR LAST_BYTE_SENT bit. - * - * Revision 1.2 1994/01/15 06:14:11 drew - * REAL DMA support, bug fixes. - * - * Revision 1.1 1994/01/15 06:00:54 drew - * Initial revision - * + * With contributions from Ray Van Tassle, Ingmar Baumgart, + * Ronald van Cuijlenborg, Alan Cox and others. */ /* - * Further development / testing that should be done : + * Further development / testing that should be done : * 1. Cleanup the NCR5380_transfer_dma function and DMA operation complete - * code so that everything does the same thing that's done at the - * end of a pseudo-DMA read operation. + * code so that everything does the same thing that's done at the + * end of a pseudo-DMA read operation. * * 2. Fix REAL_DMA (interrupt driven, polled works fine) - - * basically, transfer size needs to be reduced by one - * and the last byte read as is done with PSEUDO_DMA. - * - * 4. Test SCSI-II tagged queueing (I have no devices which support - * tagged queueing) - * - * 5. Test linked command handling code after Eric is ready with - * the high level code. + * basically, transfer size needs to be reduced by one + * and the last byte read as is done with PSEUDO_DMA. + * + * 4. Test SCSI-II tagged queueing (I have no devices which support + * tagged queueing) */ -#include <scsi/scsi_dbg.h> -#include <scsi/scsi_transport_spi.h> - -#if (NDEBUG & NDEBUG_LISTS) -#define LIST(x,y) {printk("LINE:%d Adding %p to %p\n", __LINE__, (void*)(x), (void*)(y)); if ((x)==(y)) udelay(5); } -#define REMOVE(w,x,y,z) {printk("LINE:%d Removing: %p->%p %p->%p \n", __LINE__, (void*)(w), (void*)(x), (void*)(y), (void*)(z)); if ((x)==(y)) udelay(5); } -#else -#define LIST(x,y) -#define REMOVE(w,x,y,z) -#endif #ifndef notyet -#undef LINKED #undef REAL_DMA #endif -#ifdef REAL_DMA_POLL -#undef READ_OVERRUNS -#define READ_OVERRUNS -#endif - #ifdef BOARD_REQUIRES_NO_DELAY #define io_recovery_delay(x) #else @@ -112,44 +56,28 @@ /* * Design * - * This is a generic 5380 driver. To use it on a different platform, + * This is a generic 5380 driver. To use it on a different platform, * one simply writes appropriate system specific macros (ie, data - * transfer - some PC's will use the I/O bus, 68K's must use + * transfer - some PC's will use the I/O bus, 68K's must use * memory mapped) and drops this file in their 'C' wrapper. * - * (Note from hch: unfortunately it was not enough for the different - * m68k folks and instead of improving this driver they copied it - * and hacked it up for their needs. As a consequence they lost - * most updates to this driver. Maybe someone will fix all these - * drivers to use a common core one day..) - * - * As far as command queueing, two queues are maintained for + * As far as command queueing, two queues are maintained for * each 5380 in the system - commands that haven't been issued yet, - * and commands that are currently executing. This means that an - * unlimited number of commands may be queued, letting - * more commands propagate from the higher driver levels giving higher - * throughput. Note that both I_T_L and I_T_L_Q nexuses are supported, - * allowing multiple commands to propagate all the way to a SCSI-II device + * and commands that are currently executing. This means that an + * unlimited number of commands may be queued, letting + * more commands propagate from the higher driver levels giving higher + * throughput. Note that both I_T_L and I_T_L_Q nexuses are supported, + * allowing multiple commands to propagate all the way to a SCSI-II device * while a command is already executing. * * - * Issues specific to the NCR5380 : + * Issues specific to the NCR5380 : * - * When used in a PIO or pseudo-dma mode, the NCR5380 is a braindead - * piece of hardware that requires you to sit in a loop polling for - * the REQ signal as long as you are connected. Some devices are - * brain dead (ie, many TEXEL CD ROM drives) and won't disconnect - * while doing long seek operations. - * - * The workaround for this is to keep track of devices that have - * disconnected. If the device hasn't disconnected, for commands that - * should disconnect, we do something like - * - * while (!REQ is asserted) { sleep for N usecs; poll for M usecs } - * - * Some tweaking of N and M needs to be done. An algorithm based - * on "time to data" would give the best results as long as short time - * to datas (ie, on the same track) were considered, however these + * When used in a PIO or pseudo-dma mode, the NCR5380 is a braindead + * piece of hardware that requires you to sit in a loop polling for + * the REQ signal as long as you are connected. Some devices are + * brain dead (ie, many TEXEL CD ROM drives) and won't disconnect + * while doing long seek operations. [...] These * broken devices are the exception rather than the rule and I'd rather * spend my time optimizing for the normal case. * @@ -159,23 +87,23 @@ * which is started from a workqueue for each NCR5380 host in the * system. It attempts to establish I_T_L or I_T_L_Q nexuses by * removing the commands from the issue queue and calling - * NCR5380_select() if a nexus is not established. + * NCR5380_select() if a nexus is not established. * * Once a nexus is established, the NCR5380_information_transfer() * phase goes through the various phases as instructed by the target. * if the target goes into MSG IN and sends a DISCONNECT message, * the command structure is placed into the per instance disconnected - * queue, and NCR5380_main tries to find more work. If the target is + * queue, and NCR5380_main tries to find more work. If the target is * idle for too long, the system will try to sleep. * * If a command has disconnected, eventually an interrupt will trigger, * calling NCR5380_intr() which will in turn call NCR5380_reselect * to reestablish a nexus. This will run main if necessary. * - * On command termination, the done function will be called as + * On command termination, the done function will be called as * appropriate. * - * SCSI pointers are maintained in the SCp field of SCSI command + * SCSI pointers are maintained in the SCp field of SCSI command * structures, being initialized after the command is connected * in NCR5380_select, and set as appropriate in NCR5380_information_transfer. * Note that in violation of the standard, an implicit SAVE POINTERS operation @@ -185,73 +113,48 @@ /* * Using this file : * This file a skeleton Linux SCSI driver for the NCR 5380 series - * of chips. To use it, you write an architecture specific functions + * of chips. To use it, you write an architecture specific functions * and macros and include this file in your driver. * - * These macros control options : - * AUTOPROBE_IRQ - if defined, the NCR5380_probe_irq() function will be - * defined. - * + * These macros control options : + * AUTOPROBE_IRQ - if defined, the NCR5380_probe_irq() function will be + * defined. + * * AUTOSENSE - if defined, REQUEST SENSE will be performed automatically - * for commands that return with a CHECK CONDITION status. + * for commands that return with a CHECK CONDITION status. * * DIFFERENTIAL - if defined, NCR53c81 chips will use external differential - * transceivers. + * transceivers. * * DONT_USE_INTR - if defined, never use interrupts, even if we probe or - * override-configure an IRQ. - * - * LIMIT_TRANSFERSIZE - if defined, limit the pseudo-dma transfers to 512 - * bytes at a time. Since interrupts are disabled by default during - * these transfers, we might need this to give reasonable interrupt - * service time if the transfer size gets too large. - * - * LINKED - if defined, linked commands are supported. + * override-configure an IRQ. * * PSEUDO_DMA - if defined, PSEUDO DMA is used during the data transfer phases. * * REAL_DMA - if defined, REAL DMA is used during the data transfer phases. * * REAL_DMA_POLL - if defined, REAL DMA is used but the driver doesn't - * rely on phase mismatch and EOP interrupts to determine end - * of phase. - * - * UNSAFE - leave interrupts enabled during pseudo-DMA transfers. You - * only really want to use this if you're having a problem with - * dropped characters during high speed communications, and even - * then, you're going to be better off twiddling with transfersize - * in the high level code. - * - * Defaults for these will be provided although the user may want to adjust - * these to allocate CPU resources to the SCSI driver or "real" code. - * - * USLEEP_SLEEP - amount of time, in jiffies, to sleep - * - * USLEEP_POLL - amount of time, in jiffies, to poll + * rely on phase mismatch and EOP interrupts to determine end + * of phase. * * These macros MUST be defined : - * NCR5380_local_declare() - declare any local variables needed for your - * transfer routines. * - * NCR5380_setup(instance) - initialize any local variables needed from a given - * instance of the host adapter for NCR5380_{read,write,pread,pwrite} - * * NCR5380_read(register) - read from the specified register * - * NCR5380_write(register, value) - write to the specific register + * NCR5380_write(register, value) - write to the specific register * - * NCR5380_implementation_fields - additional fields needed for this - * specific implementation of the NCR5380 + * NCR5380_implementation_fields - additional fields needed for this + * specific implementation of the NCR5380 * * Either real DMA *or* pseudo DMA may be implemented - * REAL functions : + * REAL functions : * NCR5380_REAL_DMA should be defined if real DMA is to be used. - * Note that the DMA setup functions should return the number of bytes - * that they were able to program the controller for. + * Note that the DMA setup functions should return the number of bytes + * that they were able to program the controller for. * - * Also note that generic i386/PC versions of these macros are - * available as NCR5380_i386_dma_write_setup, - * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual. + * Also note that generic i386/PC versions of these macros are + * available as NCR5380_i386_dma_write_setup, + * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual. * * NCR5380_dma_write_setup(instance, src, count) - initialize * NCR5380_dma_read_setup(instance, dst, count) - initialize @@ -262,25 +165,25 @@ * NCR5380_pread(instance, dst, count); * * The generic driver is initialized by calling NCR5380_init(instance), - * after setting the appropriate host specific fields and ID. If the + * after setting the appropriate host specific fields and ID. If the * driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance, * possible) function may be used. */ -static int do_abort(struct Scsi_Host *host); -static void do_reset(struct Scsi_Host *host); +static int do_abort(struct Scsi_Host *); +static void do_reset(struct Scsi_Host *); -/* - * initialize_SCp - init the scsi pointer field - * @cmd: command block to set up +/** + * initialize_SCp - init the scsi pointer field + * @cmd: command block to set up * - * Set up the internal fields in the SCSI command. + * Set up the internal fields in the SCSI command. */ static inline void initialize_SCp(struct scsi_cmnd *cmd) { - /* - * Initialize the Scsi Pointer field so that all of the commands in the + /* + * Initialize the Scsi Pointer field so that all of the commands in the * various queues are valid. */ @@ -295,120 +198,123 @@ static inline void initialize_SCp(struct scsi_cmnd *cmd) cmd->SCp.ptr = NULL; cmd->SCp.this_residual = 0; } + + cmd->SCp.Status = 0; + cmd->SCp.Message = 0; } /** - * NCR5380_poll_politely - wait for NCR5380 status bits - * @instance: controller to poll - * @reg: 5380 register to poll - * @bit: Bitmask to check - * @val: Value required to exit - * - * Polls the NCR5380 in a reasonably efficient manner waiting for - * an event to occur, after a short quick poll we begin giving the - * CPU back in non IRQ contexts - * - * Returns the value of the register or a negative error code. + * NCR5380_poll_politely2 - wait for two chip register values + * @instance: controller to poll + * @reg1: 5380 register to poll + * @bit1: Bitmask to check + * @val1: Expected value + * @reg2: Second 5380 register to poll + * @bit2: Second bitmask to check + * @val2: Second expected value + * @wait: Time-out in jiffies + * + * Polls the chip in a reasonably efficient manner waiting for an + * event to occur. After a short quick poll we begin to yield the CPU + * (if possible). In irq contexts the time-out is arbitrarily limited. + * Callers may hold locks as long as they are held in irq mode. + * + * Returns 0 if either or both event(s) occurred otherwise -ETIMEDOUT. */ - -static int NCR5380_poll_politely(struct Scsi_Host *instance, int reg, int bit, int val, int t) + +static int NCR5380_poll_politely2(struct Scsi_Host *instance, + int reg1, int bit1, int val1, + int reg2, int bit2, int val2, int wait) { - NCR5380_local_declare(); - int n = 500; /* At about 8uS a cycle for the cpu access */ - unsigned long end = jiffies + t; - int r; - - NCR5380_setup(instance); - - while( n-- > 0) - { - r = NCR5380_read(reg); - if((r & bit) == val) + struct NCR5380_hostdata *hostdata = shost_priv(instance); + unsigned long deadline = jiffies + wait; + unsigned long n; + + /* Busy-wait for up to 10 ms */ + n = min(10000U, jiffies_to_usecs(wait)); + n *= hostdata->accesses_per_ms; + n /= 2000; + do { + if ((NCR5380_read(reg1) & bit1) == val1) + return 0; + if ((NCR5380_read(reg2) & bit2) == val2) return 0; cpu_relax(); - } - - /* t time yet ? */ - while(time_before(jiffies, end)) - { - r = NCR5380_read(reg); - if((r & bit) == val) + } while (n--); + + if (irqs_disabled() || in_interrupt()) + return -ETIMEDOUT; + + /* Repeatedly sleep for 1 ms until deadline */ + while (time_is_after_jiffies(deadline)) { + schedule_timeout_uninterruptible(1); + if ((NCR5380_read(reg1) & bit1) == val1) + return 0; + if ((NCR5380_read(reg2) & bit2) == val2) return 0; - if(!in_interrupt()) - cond_resched(); - else - cpu_relax(); } + return -ETIMEDOUT; } -static struct { - unsigned char value; - const char *name; -} phases[] __maybe_unused = { - {PHASE_DATAOUT, "DATAOUT"}, - {PHASE_DATAIN, "DATAIN"}, - {PHASE_CMDOUT, "CMDOUT"}, - {PHASE_STATIN, "STATIN"}, - {PHASE_MSGOUT, "MSGOUT"}, - {PHASE_MSGIN, "MSGIN"}, - {PHASE_UNKNOWN, "UNKNOWN"} -}; +static inline int NCR5380_poll_politely(struct Scsi_Host *instance, + int reg, int bit, int val, int wait) +{ + return NCR5380_poll_politely2(instance, reg, bit, val, + reg, bit, val, wait); +} #if NDEBUG static struct { unsigned char mask; const char *name; -} signals[] = { - {SR_DBP, "PARITY"}, - {SR_RST, "RST"}, - {SR_BSY, "BSY"}, - {SR_REQ, "REQ"}, - {SR_MSG, "MSG"}, - {SR_CD, "CD"}, - {SR_IO, "IO"}, - {SR_SEL, "SEL"}, +} signals[] = { + {SR_DBP, "PARITY"}, + {SR_RST, "RST"}, + {SR_BSY, "BSY"}, + {SR_REQ, "REQ"}, + {SR_MSG, "MSG"}, + {SR_CD, "CD"}, + {SR_IO, "IO"}, + {SR_SEL, "SEL"}, {0, NULL} -}, +}, basrs[] = { - {BASR_ATN, "ATN"}, - {BASR_ACK, "ACK"}, + {BASR_ATN, "ATN"}, + {BASR_ACK, "ACK"}, {0, NULL} -}, -icrs[] = { - {ICR_ASSERT_RST, "ASSERT RST"}, - {ICR_ASSERT_ACK, "ASSERT ACK"}, - {ICR_ASSERT_BSY, "ASSERT BSY"}, - {ICR_ASSERT_SEL, "ASSERT SEL"}, - {ICR_ASSERT_ATN, "ASSERT ATN"}, - {ICR_ASSERT_DATA, "ASSERT DATA"}, +}, +icrs[] = { + {ICR_ASSERT_RST, "ASSERT RST"}, + {ICR_ASSERT_ACK, "ASSERT ACK"}, + {ICR_ASSERT_BSY, "ASSERT BSY"}, + {ICR_ASSERT_SEL, "ASSERT SEL"}, + {ICR_ASSERT_ATN, "ASSERT ATN"}, + {ICR_ASSERT_DATA, "ASSERT DATA"}, {0, NULL} -}, -mrs[] = { - {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"}, - {MR_TARGET, "MODE TARGET"}, - {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"}, - {MR_ENABLE_PAR_INTR, "MODE PARITY INTR"}, - {MR_MONITOR_BSY, "MODE MONITOR BSY"}, - {MR_DMA_MODE, "MODE DMA"}, - {MR_ARBITRATE, "MODE ARBITRATION"}, +}, +mrs[] = { + {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"}, + {MR_TARGET, "MODE TARGET"}, + {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"}, + {MR_ENABLE_PAR_INTR, "MODE PARITY INTR"}, + {MR_ENABLE_EOP_INTR, "MODE EOP INTR"}, + {MR_MONITOR_BSY, "MODE MONITOR BSY"}, + {MR_DMA_MODE, "MODE DMA"}, + {MR_ARBITRATE, "MODE ARBITRATION"}, {0, NULL} }; /** - * NCR5380_print - print scsi bus signals - * @instance: adapter state to dump - * - * Print the SCSI bus signals for debugging purposes + * NCR5380_print - print scsi bus signals + * @instance: adapter state to dump * - * Locks: caller holds hostdata lock (not essential) + * Print the SCSI bus signals for debugging purposes */ static void NCR5380_print(struct Scsi_Host *instance) { - NCR5380_local_declare(); unsigned char status, data, basr, mr, icr, i; - NCR5380_setup(instance); data = NCR5380_read(CURRENT_SCSI_DATA_REG); status = NCR5380_read(STATUS_REG); @@ -435,117 +341,56 @@ static void NCR5380_print(struct Scsi_Host *instance) printk("\n"); } +static struct { + unsigned char value; + const char *name; +} phases[] = { + {PHASE_DATAOUT, "DATAOUT"}, + {PHASE_DATAIN, "DATAIN"}, + {PHASE_CMDOUT, "CMDOUT"}, + {PHASE_STATIN, "STATIN"}, + {PHASE_MSGOUT, "MSGOUT"}, + {PHASE_MSGIN, "MSGIN"}, + {PHASE_UNKNOWN, "UNKNOWN"} +}; -/* - * NCR5380_print_phase - show SCSI phase - * @instance: adapter to dump - * - * Print the current SCSI phase for debugging purposes +/** + * NCR5380_print_phase - show SCSI phase + * @instance: adapter to dump * - * Locks: none + * Print the current SCSI phase for debugging purposes */ static void NCR5380_print_phase(struct Scsi_Host *instance) { - NCR5380_local_declare(); unsigned char status; int i; - NCR5380_setup(instance); status = NCR5380_read(STATUS_REG); if (!(status & SR_REQ)) - printk("scsi%d : REQ not asserted, phase unknown.\n", instance->host_no); + shost_printk(KERN_DEBUG, instance, "REQ not asserted, phase unknown.\n"); else { - for (i = 0; (phases[i].value != PHASE_UNKNOWN) && (phases[i].value != (status & PHASE_MASK)); ++i); - printk("scsi%d : phase %s\n", instance->host_no, phases[i].name); + for (i = 0; (phases[i].value != PHASE_UNKNOWN) && + (phases[i].value != (status & PHASE_MASK)); ++i) + ; + shost_printk(KERN_DEBUG, instance, "phase %s\n", phases[i].name); } } #endif -/* - * These need tweaking, and would probably work best as per-device - * flags initialized differently for disk, tape, cd, etc devices. - * People with broken devices are free to experiment as to what gives - * the best results for them. - * - * USLEEP_SLEEP should be a minimum seek time. - * - * USLEEP_POLL should be a maximum rotational latency. - */ -#ifndef USLEEP_SLEEP -/* 20 ms (reasonable hard disk speed) */ -#define USLEEP_SLEEP msecs_to_jiffies(20) -#endif -/* 300 RPM (floppy speed) */ -#ifndef USLEEP_POLL -#define USLEEP_POLL msecs_to_jiffies(200) -#endif -#ifndef USLEEP_WAITLONG -/* RvC: (reasonable time to wait on select error) */ -#define USLEEP_WAITLONG USLEEP_SLEEP -#endif -/* - * Function : int should_disconnect (unsigned char cmd) - * - * Purpose : decide whether a command would normally disconnect or - * not, since if it won't disconnect we should go to sleep. - * - * Input : cmd - opcode of SCSI command - * - * Returns : DISCONNECT_LONG if we should disconnect for a really long - * time (ie always, sleep, look for REQ active, sleep), - * DISCONNECT_TIME_TO_DATA if we would only disconnect for a normal - * time-to-data delay, DISCONNECT_NONE if this command would return - * immediately. - * - * Future sleep algorithms based on time to data can exploit - * something like this so they can differentiate between "normal" - * (ie, read, write, seek) and unusual commands (ie, * format). - * - * Note : We don't deal with commands that handle an immediate disconnect, - * - */ - -static int should_disconnect(unsigned char cmd) -{ - switch (cmd) { - case READ_6: - case WRITE_6: - case SEEK_6: - case READ_10: - case WRITE_10: - case SEEK_10: - return DISCONNECT_TIME_TO_DATA; - case FORMAT_UNIT: - case SEARCH_HIGH: - case SEARCH_LOW: - case SEARCH_EQUAL: - return DISCONNECT_LONG; - default: - return DISCONNECT_NONE; - } -} - -static void NCR5380_set_timer(struct NCR5380_hostdata *hostdata, unsigned long timeout) -{ - hostdata->time_expires = jiffies + timeout; - schedule_delayed_work(&hostdata->coroutine, timeout); -} - - -static int probe_irq __initdata = 0; +static int probe_irq __initdata; /** - * probe_intr - helper for IRQ autoprobe - * @irq: interrupt number - * @dev_id: unused - * @regs: unused + * probe_intr - helper for IRQ autoprobe + * @irq: interrupt number + * @dev_id: unused + * @regs: unused * - * Set a flag to indicate the IRQ in question was received. This is - * used by the IRQ probe code. + * Set a flag to indicate the IRQ in question was received. This is + * used by the IRQ probe code. */ - + static irqreturn_t __init probe_intr(int irq, void *dev_id) { probe_irq = irq; @@ -553,24 +398,20 @@ static irqreturn_t __init probe_intr(int irq, void *dev_id) } /** - * NCR5380_probe_irq - find the IRQ of an NCR5380 - * @instance: NCR5380 controller - * @possible: bitmask of ISA IRQ lines + * NCR5380_probe_irq - find the IRQ of an NCR5380 + * @instance: NCR5380 controller + * @possible: bitmask of ISA IRQ lines * - * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ - * and then looking to see what interrupt actually turned up. - * - * Locks: none, irqs must be enabled on entry + * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ + * and then looking to see what interrupt actually turned up. */ static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance, int possible) { - NCR5380_local_declare(); - struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; + struct NCR5380_hostdata *hostdata = shost_priv(instance); unsigned long timeout; int trying_irqs, i, mask; - NCR5380_setup(instance); for (trying_irqs = 0, i = 1, mask = 2; i < 16; ++i, mask <<= 1) if ((mask & possible) && (request_irq(i, &probe_intr, 0, "NCR-probe", NULL) == 0)) @@ -581,7 +422,7 @@ static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance, /* * A interrupt is triggered whenever BSY = false, SEL = true - * and a bit set in the SELECT_ENABLE_REG is asserted on the + * and a bit set in the SELECT_ENABLE_REG is asserted on the * SCSI bus. * * Note that the bus is only driven when the phase control signals @@ -596,7 +437,7 @@ static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance, while (probe_irq == NO_IRQ && time_before(jiffies, timeout)) schedule_timeout_uninterruptible(1); - + NCR5380_write(SELECT_ENABLE_REG, 0); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); @@ -608,12 +449,10 @@ static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance, } /** - * NCR58380_info - report driver and host information - * @instance: relevant scsi host instance - * - * For use as the host template info() handler. + * NCR58380_info - report driver and host information + * @instance: relevant scsi host instance * - * Locks: none + * For use as the host template info() handler. */ static const char *NCR5380_info(struct Scsi_Host *instance) @@ -633,20 +472,14 @@ static void prepare_info(struct Scsi_Host *instance) "can_queue %d, cmd_per_lun %d, " "sg_tablesize %d, this_id %d, " "flags { %s%s%s}, " -#if defined(USLEEP_POLL) && defined(USLEEP_WAITLONG) - "USLEEP_POLL %lu, USLEEP_WAITLONG %lu, " -#endif "options { %s} ", instance->hostt->name, instance->io_port, instance->n_io_port, instance->base, instance->irq, instance->can_queue, instance->cmd_per_lun, instance->sg_tablesize, instance->this_id, - hostdata->flags & FLAG_NCR53C400 ? "NCR53C400 " : "", - hostdata->flags & FLAG_DTC3181E ? "DTC3181E " : "", + hostdata->flags & FLAG_NO_DMA_FIXUP ? "NO_DMA_FIXUP " : "", hostdata->flags & FLAG_NO_PSEUDO_DMA ? "NO_PSEUDO_DMA " : "", -#if defined(USLEEP_POLL) && defined(USLEEP_WAITLONG) - USLEEP_POLL, USLEEP_WAITLONG, -#endif + hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY " : "", #ifdef AUTOPROBE_IRQ "AUTOPROBE_IRQ " #endif @@ -665,46 +498,10 @@ static void prepare_info(struct Scsi_Host *instance) #ifdef PSEUDO_DMA "PSEUDO_DMA " #endif -#ifdef UNSAFE - "UNSAFE " -#endif -#ifdef NCR53C400 - "NCR53C400 " -#endif ""); } -/** - * NCR5380_print_status - dump controller info - * @instance: controller to dump - * - * Print commands in the various queues, called from NCR5380_abort - * and NCR5380_debug to aid debugging. - * - * Locks: called functions disable irqs - */ - -static void NCR5380_print_status(struct Scsi_Host *instance) -{ - NCR5380_dprint(NDEBUG_ANY, instance); - NCR5380_dprint_phase(NDEBUG_ANY, instance); -} - #ifdef PSEUDO_DMA -/******************************************/ -/* - * /proc/scsi/[dtc pas16 t128 generic]/[0-ASC_NUM_BOARD_SUPPORTED] - * - * *buffer: I/O buffer - * **start: if inout == FALSE pointer into buffer where user read should start - * offset: current offset - * length: length of buffer - * hostno: Scsi_Host host_no - * inout: TRUE - user is writing; FALSE - user is reading - * - * Return the number of bytes read from or written - */ - static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance, char *buffer, int length) { @@ -714,104 +511,41 @@ static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance, hostdata->spin_max_w = 0; return 0; } -#endif - -static -void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m); -static -void lprint_command(unsigned char *cmd, struct seq_file *m); -static -void lprint_opcode(int opcode, struct seq_file *m); static int __maybe_unused NCR5380_show_info(struct seq_file *m, - struct Scsi_Host *instance) + struct Scsi_Host *instance) { - struct NCR5380_hostdata *hostdata; - struct scsi_cmnd *ptr; - - hostdata = (struct NCR5380_hostdata *) instance->hostdata; + struct NCR5380_hostdata *hostdata = shost_priv(instance); -#ifdef PSEUDO_DMA seq_printf(m, "Highwater I/O busy spin counts: write %d, read %d\n", hostdata->spin_max_w, hostdata->spin_max_r); -#endif - spin_lock_irq(instance->host_lock); - if (!hostdata->connected) - seq_printf(m, "scsi%d: no currently connected command\n", instance->host_no); - else - lprint_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected, m); - seq_printf(m, "scsi%d: issue_queue\n", instance->host_no); - for (ptr = (struct scsi_cmnd *) hostdata->issue_queue; ptr; ptr = (struct scsi_cmnd *) ptr->host_scribble) - lprint_Scsi_Cmnd(ptr, m); - - seq_printf(m, "scsi%d: disconnected_queue\n", instance->host_no); - for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr; ptr = (struct scsi_cmnd *) ptr->host_scribble) - lprint_Scsi_Cmnd(ptr, m); - spin_unlock_irq(instance->host_lock); return 0; } - -static void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m) -{ - seq_printf(m, "scsi%d : destination target %d, lun %llu\n", cmd->device->host->host_no, cmd->device->id, cmd->device->lun); - seq_puts(m, " command = "); - lprint_command(cmd->cmnd, m); -} - -static void lprint_command(unsigned char *command, struct seq_file *m) -{ - int i, s; - lprint_opcode(command[0], m); - for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i) - seq_printf(m, "%02x ", command[i]); - seq_putc(m, '\n'); -} - -static void lprint_opcode(int opcode, struct seq_file *m) -{ - seq_printf(m, "%2d (0x%02x)", opcode, opcode); -} - +#endif /** - * NCR5380_init - initialise an NCR5380 - * @instance: adapter to configure - * @flags: control flags + * NCR5380_init - initialise an NCR5380 + * @instance: adapter to configure + * @flags: control flags * - * Initializes *instance and corresponding 5380 chip, - * with flags OR'd into the initial flags value. + * Initializes *instance and corresponding 5380 chip, + * with flags OR'd into the initial flags value. * - * Notes : I assume that the host, hostno, and id bits have been - * set correctly. I don't care about the irq and other fields. + * Notes : I assume that the host, hostno, and id bits have been + * set correctly. I don't care about the irq and other fields. * - * Returns 0 for success - * - * Locks: interrupts must be enabled when we are called + * Returns 0 for success */ static int NCR5380_init(struct Scsi_Host *instance, int flags) { - NCR5380_local_declare(); - int i, pass; - unsigned long timeout; - struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; - - if(in_interrupt()) - printk(KERN_ERR "NCR5380_init called with interrupts off!\n"); - /* - * On NCR53C400 boards, NCR5380 registers are mapped 8 past - * the base address. - */ - -#ifdef NCR53C400 - if (flags & FLAG_NCR53C400) - instance->NCR5380_instance_name += NCR53C400_address_adjust; -#endif - - NCR5380_setup(instance); + struct NCR5380_hostdata *hostdata = shost_priv(instance); + int i; + unsigned long deadline; - hostdata->aborted = 0; + hostdata->host = instance; hostdata->id_mask = 1 << instance->this_id; + hostdata->id_higher_mask = 0; for (i = hostdata->id_mask; i <= 0x80; i <<= 1) if (i > hostdata->id_mask) hostdata->id_higher_mask |= i; @@ -820,21 +554,21 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags) #ifdef REAL_DMA hostdata->dmalen = 0; #endif - hostdata->targets_present = 0; + spin_lock_init(&hostdata->lock); hostdata->connected = NULL; - hostdata->issue_queue = NULL; - hostdata->disconnected_queue = NULL; - - INIT_DELAYED_WORK(&hostdata->coroutine, NCR5380_main); - - /* The CHECK code seems to break the 53C400. Will check it later maybe */ - if (flags & FLAG_NCR53C400) - hostdata->flags = FLAG_HAS_LAST_BYTE_SENT | flags; - else - hostdata->flags = FLAG_CHECK_LAST_BYTE_SENT | flags; + hostdata->sensing = NULL; + INIT_LIST_HEAD(&hostdata->autosense); + INIT_LIST_HEAD(&hostdata->unissued); + INIT_LIST_HEAD(&hostdata->disconnected); - hostdata->host = instance; - hostdata->time_expires = 0; + hostdata->flags = flags; + + INIT_WORK(&hostdata->main_task, NCR5380_main); + hostdata->work_q = alloc_workqueue("ncr5380_%d", + WQ_UNBOUND | WQ_MEM_RECLAIM, + 1, instance->host_no); + if (!hostdata->work_q) + return -ENOMEM; prepare_info(instance); @@ -843,43 +577,69 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags) NCR5380_write(TARGET_COMMAND_REG, 0); NCR5380_write(SELECT_ENABLE_REG, 0); -#ifdef NCR53C400 - if (hostdata->flags & FLAG_NCR53C400) { - NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE); - } -#endif + /* Calibrate register polling loop */ + i = 0; + deadline = jiffies + 1; + do { + cpu_relax(); + } while (time_is_after_jiffies(deadline)); + deadline += msecs_to_jiffies(256); + do { + NCR5380_read(STATUS_REG); + ++i; + cpu_relax(); + } while (time_is_after_jiffies(deadline)); + hostdata->accesses_per_ms = i / 256; - /* - * Detect and correct bus wedge problems. - * - * If the system crashed, it may have crashed in a state - * where a SCSI command was still executing, and the - * SCSI bus is not in a BUS FREE STATE. - * - * If this is the case, we'll try to abort the currently - * established nexus which we know nothing about, and that - * failing, do a hard reset of the SCSI bus - */ + return 0; +} + +/** + * NCR5380_maybe_reset_bus - Detect and correct bus wedge problems. + * @instance: adapter to check + * + * If the system crashed, it may have crashed with a connected target and + * the SCSI bus busy. Check for BUS FREE phase. If not, try to abort the + * currently established nexus, which we know nothing about. Failing that + * do a bus reset. + * + * Note that a bus reset will cause the chip to assert IRQ. + * + * Returns 0 if successful, otherwise -ENXIO. + */ + +static int NCR5380_maybe_reset_bus(struct Scsi_Host *instance) +{ + struct NCR5380_hostdata *hostdata = shost_priv(instance); + int pass; for (pass = 1; (NCR5380_read(STATUS_REG) & SR_BSY) && pass <= 6; ++pass) { switch (pass) { case 1: case 3: case 5: - printk(KERN_INFO "scsi%d: SCSI bus busy, waiting up to five seconds\n", instance->host_no); - timeout = jiffies + 5 * HZ; - NCR5380_poll_politely(instance, STATUS_REG, SR_BSY, 0, 5*HZ); + shost_printk(KERN_ERR, instance, "SCSI bus busy, waiting up to five seconds\n"); + NCR5380_poll_politely(instance, + STATUS_REG, SR_BSY, 0, 5 * HZ); break; case 2: - printk(KERN_WARNING "scsi%d: bus busy, attempting abort\n", instance->host_no); + shost_printk(KERN_ERR, instance, "bus busy, attempting abort\n"); do_abort(instance); break; case 4: - printk(KERN_WARNING "scsi%d: bus busy, attempting reset\n", instance->host_no); + shost_printk(KERN_ERR, instance, "bus busy, attempting reset\n"); do_reset(instance); + /* Wait after a reset; the SCSI standard calls for + * 250ms, we wait 500ms to be on the safe side. + * But some Toshiba CD-ROMs need ten times that. + */ + if (hostdata->flags & FLAG_TOSHIBA_DELAY) + msleep(2500); + else + msleep(500); break; case 6: - printk(KERN_ERR "scsi%d: bus locked solid or invalid override\n", instance->host_no); + shost_printk(KERN_ERR, instance, "bus locked solid\n"); return -ENXIO; } } @@ -887,450 +647,513 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags) } /** - * NCR5380_exit - remove an NCR5380 - * @instance: adapter to remove + * NCR5380_exit - remove an NCR5380 + * @instance: adapter to remove + * + * Assumes that no more work can be queued (e.g. by NCR5380_intr). */ static void NCR5380_exit(struct Scsi_Host *instance) { - struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; + struct NCR5380_hostdata *hostdata = shost_priv(instance); - cancel_delayed_work_sync(&hostdata->coroutine); + cancel_work_sync(&hostdata->main_task); + destroy_workqueue(hostdata->work_q); } /** - * NCR5380_queue_command - queue a command - * @cmd: SCSI command - * @done: completion handler - * - * cmd is added to the per instance issue_queue, with minor - * twiddling done to the host specific fields of cmd. If the - * main coroutine is not running, it is restarted. + * complete_cmd - finish processing a command and return it to the SCSI ML + * @instance: the host instance + * @cmd: command to complete + */ + +static void complete_cmd(struct Scsi_Host *instance, + struct scsi_cmnd *cmd) +{ + struct NCR5380_hostdata *hostdata = shost_priv(instance); + + dsprintk(NDEBUG_QUEUES, instance, "complete_cmd: cmd %p\n", cmd); + + if (hostdata->sensing == cmd) { + /* Autosense processing ends here */ + if ((cmd->result & 0xff) != SAM_STAT_GOOD) { + scsi_eh_restore_cmnd(cmd, &hostdata->ses); + set_host_byte(cmd, DID_ERROR); + } else + scsi_eh_restore_cmnd(cmd, &hostdata->ses); + hostdata->sensing = NULL; + } + + hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun); + + cmd->scsi_done(cmd); +} + +/** + * NCR5380_queue_command - queue a command + * @instance: the relevant SCSI adapter + * @cmd: SCSI command * - * Locks: host lock taken by caller + * cmd is added to the per-instance issue queue, with minor + * twiddling done to the host specific fields of cmd. If the + * main coroutine is not running, it is restarted. */ -static int NCR5380_queue_command_lck(struct scsi_cmnd *cmd, void (*done) (struct scsi_cmnd *)) +static int NCR5380_queue_command(struct Scsi_Host *instance, + struct scsi_cmnd *cmd) { - struct Scsi_Host *instance = cmd->device->host; - struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; - struct scsi_cmnd *tmp; + struct NCR5380_hostdata *hostdata = shost_priv(instance); + struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd); + unsigned long flags; #if (NDEBUG & NDEBUG_NO_WRITE) switch (cmd->cmnd[0]) { case WRITE_6: case WRITE_10: - printk("scsi%d : WRITE attempted with NO_WRITE debugging flag set\n", instance->host_no); + shost_printk(KERN_DEBUG, instance, "WRITE attempted with NDEBUG_NO_WRITE set\n"); cmd->result = (DID_ERROR << 16); - done(cmd); + cmd->scsi_done(cmd); return 0; } -#endif /* (NDEBUG & NDEBUG_NO_WRITE) */ - - /* - * We use the host_scribble field as a pointer to the next command - * in a queue - */ +#endif /* (NDEBUG & NDEBUG_NO_WRITE) */ - cmd->host_scribble = NULL; - cmd->scsi_done = done; cmd->result = 0; - /* - * Insert the cmd into the issue queue. Note that REQUEST SENSE + spin_lock_irqsave(&hostdata->lock, flags); + + /* + * Insert the cmd into the issue queue. Note that REQUEST SENSE * commands are added to the head of the queue since any command will - * clear the contingent allegiance condition that exists and the + * clear the contingent allegiance condition that exists and the * sense data is only guaranteed to be valid while the condition exists. */ - if (!(hostdata->issue_queue) || (cmd->cmnd[0] == REQUEST_SENSE)) { - LIST(cmd, hostdata->issue_queue); - cmd->host_scribble = (unsigned char *) hostdata->issue_queue; - hostdata->issue_queue = cmd; - } else { - for (tmp = (struct scsi_cmnd *) hostdata->issue_queue; tmp->host_scribble; tmp = (struct scsi_cmnd *) tmp->host_scribble); - LIST(cmd, tmp); - tmp->host_scribble = (unsigned char *) cmd; - } - dprintk(NDEBUG_QUEUES, "scsi%d : command added to %s of queue\n", instance->host_no, (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail"); + if (cmd->cmnd[0] == REQUEST_SENSE) + list_add(&ncmd->list, &hostdata->unissued); + else + list_add_tail(&ncmd->list, &hostdata->unissued); + + spin_unlock_irqrestore(&hostdata->lock, flags); + + dsprintk(NDEBUG_QUEUES, instance, "command %p added to %s of queue\n", + cmd, (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail"); - /* Run the coroutine if it isn't already running. */ /* Kick off command processing */ - schedule_delayed_work(&hostdata->coroutine, 0); + queue_work(hostdata->work_q, &hostdata->main_task); return 0; } -static DEF_SCSI_QCMD(NCR5380_queue_command) +/** + * dequeue_next_cmd - dequeue a command for processing + * @instance: the scsi host instance + * + * Priority is given to commands on the autosense queue. These commands + * need autosense because of a CHECK CONDITION result. + * + * Returns a command pointer if a command is found for a target that is + * not already busy. Otherwise returns NULL. + */ + +static struct scsi_cmnd *dequeue_next_cmd(struct Scsi_Host *instance) +{ + struct NCR5380_hostdata *hostdata = shost_priv(instance); + struct NCR5380_cmd *ncmd; + struct scsi_cmnd *cmd; + + if (list_empty(&hostdata->autosense)) { + list_for_each_entry(ncmd, &hostdata->unissued, list) { + cmd = NCR5380_to_scmd(ncmd); + dsprintk(NDEBUG_QUEUES, instance, "dequeue: cmd=%p target=%d busy=0x%02x lun=%llu\n", + cmd, scmd_id(cmd), hostdata->busy[scmd_id(cmd)], cmd->device->lun); + + if (!(hostdata->busy[scmd_id(cmd)] & (1 << cmd->device->lun))) { + list_del(&ncmd->list); + dsprintk(NDEBUG_QUEUES, instance, + "dequeue: removed %p from issue queue\n", cmd); + return cmd; + } + } + } else { + /* Autosense processing begins here */ + ncmd = list_first_entry(&hostdata->autosense, + struct NCR5380_cmd, list); + list_del(&ncmd->list); + cmd = NCR5380_to_scmd(ncmd); + dsprintk(NDEBUG_QUEUES, instance, + "dequeue: removed %p from autosense queue\n", cmd); + scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0); + hostdata->sensing = cmd; + return cmd; + } + return NULL; +} + +static void requeue_cmd(struct Scsi_Host *instance, struct scsi_cmnd *cmd) +{ + struct NCR5380_hostdata *hostdata = shost_priv(instance); + struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd); + + if (hostdata->sensing) { + scsi_eh_restore_cmnd(cmd, &hostdata->ses); + list_add(&ncmd->list, &hostdata->autosense); + hostdata->sensing = NULL; + } else + list_add(&ncmd->list, &hostdata->unissued); +} /** - * NCR5380_main - NCR state machines - * - * NCR5380_main is a coroutine that runs as long as more work can - * be done on the NCR5380 host adapters in a system. Both - * NCR5380_queue_command() and NCR5380_intr() will try to start it - * in case it is not running. - * - * Locks: called as its own thread with no locks held. Takes the - * host lock and called routines may take the isa dma lock. + * NCR5380_main - NCR state machines + * + * NCR5380_main is a coroutine that runs as long as more work can + * be done on the NCR5380 host adapters in a system. Both + * NCR5380_queue_command() and NCR5380_intr() will try to start it + * in case it is not running. */ static void NCR5380_main(struct work_struct *work) { struct NCR5380_hostdata *hostdata = - container_of(work, struct NCR5380_hostdata, coroutine.work); + container_of(work, struct NCR5380_hostdata, main_task); struct Scsi_Host *instance = hostdata->host; - struct scsi_cmnd *tmp, *prev; + struct scsi_cmnd *cmd; int done; - - spin_lock_irq(instance->host_lock); + do { - /* Lock held here */ done = 1; - if (!hostdata->connected && !hostdata->selecting) { - dprintk(NDEBUG_MAIN, "scsi%d : not connected\n", instance->host_no); - /* - * Search through the issue_queue for a command destined - * for a target that's not busy. - */ - for (tmp = (struct scsi_cmnd *) hostdata->issue_queue, prev = NULL; tmp; prev = tmp, tmp = (struct scsi_cmnd *) tmp->host_scribble) - { - if (prev != tmp) - dprintk(NDEBUG_LISTS, "MAIN tmp=%p target=%d busy=%d lun=%llu\n", tmp, tmp->device->id, hostdata->busy[tmp->device->id], tmp->device->lun); - /* When we find one, remove it from the issue queue. */ - if (!(hostdata->busy[tmp->device->id] & - (1 << (u8)(tmp->device->lun & 0xff)))) { - if (prev) { - REMOVE(prev, prev->host_scribble, tmp, tmp->host_scribble); - prev->host_scribble = tmp->host_scribble; - } else { - REMOVE(-1, hostdata->issue_queue, tmp, tmp->host_scribble); - hostdata->issue_queue = (struct scsi_cmnd *) tmp->host_scribble; - } - tmp->host_scribble = NULL; - /* - * Attempt to establish an I_T_L nexus here. - * On success, instance->hostdata->connected is set. - * On failure, we must add the command back to the - * issue queue so we can keep trying. - */ - dprintk(NDEBUG_MAIN|NDEBUG_QUEUES, "scsi%d : main() : command for target %d lun %llu removed from issue_queue\n", instance->host_no, tmp->device->id, tmp->device->lun); - - /* - * A successful selection is defined as one that - * leaves us with the command connected and - * in hostdata->connected, OR has terminated the - * command. - * - * With successful commands, we fall through - * and see if we can do an information transfer, - * with failures we will restart. - */ - hostdata->selecting = NULL; - /* RvC: have to preset this to indicate a new command is being performed */ + spin_lock_irq(&hostdata->lock); + while (!hostdata->connected && + (cmd = dequeue_next_cmd(instance))) { - /* - * REQUEST SENSE commands are issued without tagged - * queueing, even on SCSI-II devices because the - * contingent allegiance condition exists for the - * entire unit. - */ + dsprintk(NDEBUG_MAIN, instance, "main: dequeued %p\n", cmd); - if (!NCR5380_select(instance, tmp)) { - break; - } else { - LIST(tmp, hostdata->issue_queue); - tmp->host_scribble = (unsigned char *) hostdata->issue_queue; - hostdata->issue_queue = tmp; - done = 0; - dprintk(NDEBUG_MAIN|NDEBUG_QUEUES, "scsi%d : main(): select() failed, returned to issue_queue\n", instance->host_no); - } - /* lock held here still */ - } /* if target/lun is not busy */ - } /* for */ - /* exited locked */ - } /* if (!hostdata->connected) */ - if (hostdata->selecting) { - tmp = (struct scsi_cmnd *) hostdata->selecting; - /* Selection will drop and retake the lock */ - if (!NCR5380_select(instance, tmp)) { - /* Ok ?? */ + /* + * Attempt to establish an I_T_L nexus here. + * On success, instance->hostdata->connected is set. + * On failure, we must add the command back to the + * issue queue so we can keep trying. + */ + /* + * REQUEST SENSE commands are issued without tagged + * queueing, even on SCSI-II devices because the + * contingent allegiance condition exists for the + * entire unit. + */ + + cmd = NCR5380_select(instance, cmd); + if (!cmd) { + dsprintk(NDEBUG_MAIN, instance, "main: select complete\n"); } else { - /* RvC: device failed, so we wait a long time - this is needed for Mustek scanners, that - do not respond to commands immediately - after a scan */ - printk(KERN_DEBUG "scsi%d: device %d did not respond in time\n", instance->host_no, tmp->device->id); - LIST(tmp, hostdata->issue_queue); - tmp->host_scribble = (unsigned char *) hostdata->issue_queue; - hostdata->issue_queue = tmp; - NCR5380_set_timer(hostdata, USLEEP_WAITLONG); + dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES, instance, + "main: select failed, returning %p to queue\n", cmd); + requeue_cmd(instance, cmd); } - } /* if hostdata->selecting */ + } if (hostdata->connected #ifdef REAL_DMA && !hostdata->dmalen #endif - && (!hostdata->time_expires || time_before_eq(hostdata->time_expires, jiffies)) ) { - dprintk(NDEBUG_MAIN, "scsi%d : main() : performing information transfer\n", instance->host_no); + dsprintk(NDEBUG_MAIN, instance, "main: performing information transfer\n"); NCR5380_information_transfer(instance); - dprintk(NDEBUG_MAIN, "scsi%d : main() : done set false\n", instance->host_no); done = 0; - } else - break; + } + spin_unlock_irq(&hostdata->lock); + if (!done) + cond_resched(); } while (!done); - - spin_unlock_irq(instance->host_lock); } #ifndef DONT_USE_INTR /** - * NCR5380_intr - generic NCR5380 irq handler - * @irq: interrupt number - * @dev_id: device info - * - * Handle interrupts, reestablishing I_T_L or I_T_L_Q nexuses - * from the disconnected queue, and restarting NCR5380_main() - * as required. - * - * Locks: takes the needed instance locks + * NCR5380_intr - generic NCR5380 irq handler + * @irq: interrupt number + * @dev_id: device info + * + * Handle interrupts, reestablishing I_T_L or I_T_L_Q nexuses + * from the disconnected queue, and restarting NCR5380_main() + * as required. + * + * The chip can assert IRQ in any of six different conditions. The IRQ flag + * is then cleared by reading the Reset Parity/Interrupt Register (RPIR). + * Three of these six conditions are latched in the Bus and Status Register: + * - End of DMA (cleared by ending DMA Mode) + * - Parity error (cleared by reading RPIR) + * - Loss of BSY (cleared by reading RPIR) + * Two conditions have flag bits that are not latched: + * - Bus phase mismatch (non-maskable in DMA Mode, cleared by ending DMA Mode) + * - Bus reset (non-maskable) + * The remaining condition has no flag bit at all: + * - Selection/reselection + * + * Hence, establishing the cause(s) of any interrupt is partly guesswork. + * In "The DP8490 and DP5380 Comparison Guide", National Semiconductor + * claimed that "the design of the [DP8490] interrupt logic ensures + * interrupts will not be lost (they can be on the DP5380)." + * The L5380/53C80 datasheet from LOGIC Devices has more details. + * + * Checking for bus reset by reading RST is futile because of interrupt + * latency, but a bus reset will reset chip logic. Checking for parity error + * is unnecessary because that interrupt is never enabled. A Loss of BSY + * condition will clear DMA Mode. We can tell when this occurs because the + * the Busy Monitor interrupt is enabled together with DMA Mode. */ -static irqreturn_t NCR5380_intr(int dummy, void *dev_id) +static irqreturn_t NCR5380_intr(int irq, void *dev_id) { - NCR5380_local_declare(); struct Scsi_Host *instance = dev_id; - struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; - int done; + struct NCR5380_hostdata *hostdata = shost_priv(instance); + int handled = 0; unsigned char basr; unsigned long flags; - dprintk(NDEBUG_INTR, "scsi : NCR5380 irq %d triggered\n", - instance->irq); + spin_lock_irqsave(&hostdata->lock, flags); + + basr = NCR5380_read(BUS_AND_STATUS_REG); + if (basr & BASR_IRQ) { + unsigned char mr = NCR5380_read(MODE_REG); + unsigned char sr = NCR5380_read(STATUS_REG); + + dsprintk(NDEBUG_INTR, instance, "IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n", + irq, basr, sr, mr); - do { - done = 1; - spin_lock_irqsave(instance->host_lock, flags); - /* Look for pending interrupts */ - NCR5380_setup(instance); - basr = NCR5380_read(BUS_AND_STATUS_REG); - /* XXX dispatch to appropriate routine if found and done=0 */ - if (basr & BASR_IRQ) { - NCR5380_dprint(NDEBUG_INTR, instance); - if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) == (SR_SEL | SR_IO)) { - done = 0; - dprintk(NDEBUG_INTR, "scsi%d : SEL interrupt\n", instance->host_no); - NCR5380_reselect(instance); - (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG); - } else if (basr & BASR_PARITY_ERROR) { - dprintk(NDEBUG_INTR, "scsi%d : PARITY interrupt\n", instance->host_no); - (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG); - } else if ((NCR5380_read(STATUS_REG) & SR_RST) == SR_RST) { - dprintk(NDEBUG_INTR, "scsi%d : RESET interrupt\n", instance->host_no); - (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG); - } else { #if defined(REAL_DMA) - /* - * We should only get PHASE MISMATCH and EOP interrupts - * if we have DMA enabled, so do a sanity check based on - * the current setting of the MODE register. - */ + if ((mr & MR_DMA_MODE) || (mr & MR_MONITOR_BSY)) { + /* Probably End of DMA, Phase Mismatch or Loss of BSY. + * We ack IRQ after clearing Mode Register. Workarounds + * for End of DMA errata need to happen in DMA Mode. + */ - if ((NCR5380_read(MODE_REG) & MR_DMA) && ((basr & BASR_END_DMA_TRANSFER) || !(basr & BASR_PHASE_MATCH))) { - int transferred; + dsprintk(NDEBUG_INTR, instance, "interrupt in DMA mode\n"); - if (!hostdata->connected) - panic("scsi%d : received end of DMA interrupt with no connected cmd\n", instance->hostno); + int transferred; - transferred = (hostdata->dmalen - NCR5380_dma_residual(instance)); - hostdata->connected->SCp.this_residual -= transferred; - hostdata->connected->SCp.ptr += transferred; - hostdata->dmalen = 0; + if (!hostdata->connected) + panic("scsi%d : DMA interrupt with no connected cmd\n", + instance->hostno); - (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG); - - /* FIXME: we need to poll briefly then defer a workqueue task ! */ - NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG, BASR_ACK, 0, 2*HZ); + transferred = hostdata->dmalen - NCR5380_dma_residual(instance); + hostdata->connected->SCp.this_residual -= transferred; + hostdata->connected->SCp.ptr += transferred; + hostdata->dmalen = 0; - NCR5380_write(MODE_REG, MR_BASE); - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - } -#else - dprintk(NDEBUG_INTR, "scsi : unknown interrupt, BASR 0x%X, MR 0x%X, SR 0x%x\n", basr, NCR5380_read(MODE_REG), NCR5380_read(STATUS_REG)); - (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG); -#endif + /* FIXME: we need to poll briefly then defer a workqueue task ! */ + NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG, BASR_ACK, 0, 2 * HZ); + + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); + NCR5380_write(MODE_REG, MR_BASE); + NCR5380_read(RESET_PARITY_INTERRUPT_REG); + } else +#endif /* REAL_DMA */ + if ((NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_mask) && + (sr & (SR_SEL | SR_IO | SR_BSY | SR_RST)) == (SR_SEL | SR_IO)) { + /* Probably reselected */ + NCR5380_write(SELECT_ENABLE_REG, 0); + NCR5380_read(RESET_PARITY_INTERRUPT_REG); + + dsprintk(NDEBUG_INTR, instance, "interrupt with SEL and IO\n"); + + if (!hostdata->connected) { + NCR5380_reselect(instance); + queue_work(hostdata->work_q, &hostdata->main_task); } - } /* if BASR_IRQ */ - spin_unlock_irqrestore(instance->host_lock, flags); - if(!done) - schedule_delayed_work(&hostdata->coroutine, 0); - } while (!done); - return IRQ_HANDLED; + if (!hostdata->connected) + NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); + } else { + /* Probably Bus Reset */ + NCR5380_read(RESET_PARITY_INTERRUPT_REG); + + dsprintk(NDEBUG_INTR, instance, "unknown interrupt\n"); + } + handled = 1; + } else { + shost_printk(KERN_NOTICE, instance, "interrupt without IRQ bit\n"); + } + + spin_unlock_irqrestore(&hostdata->lock, flags); + + return IRQ_RETVAL(handled); } -#endif +#endif -/* +/* * Function : int NCR5380_select(struct Scsi_Host *instance, - * struct scsi_cmnd *cmd) + * struct scsi_cmnd *cmd) * * Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command, - * including ARBITRATION, SELECTION, and initial message out for - * IDENTIFY and queue messages. - * - * Inputs : instance - instantiation of the 5380 driver on which this - * target lives, cmd - SCSI command to execute. - * - * Returns : -1 if selection could not execute for some reason, - * 0 if selection succeeded or failed because the target - * did not respond. - * - * Side effects : - * If bus busy, arbitration failed, etc, NCR5380_select() will exit - * with registers as they should have been on entry - ie - * SELECT_ENABLE will be set appropriately, the NCR5380 - * will cease to drive any SCSI bus signals. - * - * If successful : I_T_L or I_T_L_Q nexus will be established, - * instance->connected will be set to cmd. - * SELECT interrupt will be disabled. - * - * If failed (no target) : cmd->scsi_done() will be called, and the - * cmd->result host byte set to DID_BAD_TARGET. - * - * Locks: caller holds hostdata lock in IRQ mode + * including ARBITRATION, SELECTION, and initial message out for + * IDENTIFY and queue messages. + * + * Inputs : instance - instantiation of the 5380 driver on which this + * target lives, cmd - SCSI command to execute. + * + * Returns cmd if selection failed but should be retried, + * NULL if selection failed and should not be retried, or + * NULL if selection succeeded (hostdata->connected == cmd). + * + * Side effects : + * If bus busy, arbitration failed, etc, NCR5380_select() will exit + * with registers as they should have been on entry - ie + * SELECT_ENABLE will be set appropriately, the NCR5380 + * will cease to drive any SCSI bus signals. + * + * If successful : I_T_L or I_T_L_Q nexus will be established, + * instance->connected will be set to cmd. + * SELECT interrupt will be disabled. + * + * If failed (no target) : cmd->scsi_done() will be called, and the + * cmd->result host byte set to DID_BAD_TARGET. */ - -static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) + +static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance, + struct scsi_cmnd *cmd) { - NCR5380_local_declare(); - struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; + struct NCR5380_hostdata *hostdata = shost_priv(instance); unsigned char tmp[3], phase; unsigned char *data; int len; - unsigned long timeout; - unsigned char value; int err; - NCR5380_setup(instance); - - if (hostdata->selecting) - goto part2; - - hostdata->restart_select = 0; NCR5380_dprint(NDEBUG_ARBITRATION, instance); - dprintk(NDEBUG_ARBITRATION, "scsi%d : starting arbitration, id = %d\n", instance->host_no, instance->this_id); + dsprintk(NDEBUG_ARBITRATION, instance, "starting arbitration, id = %d\n", + instance->this_id); + + /* + * Arbitration and selection phases are slow and involve dropping the + * lock, so we have to watch out for EH. An exception handler may + * change 'selecting' to NULL. This function will then return NULL + * so that the caller will forget about 'cmd'. (During information + * transfer phases, EH may change 'connected' to NULL.) + */ + hostdata->selecting = cmd; - /* - * Set the phase bits to 0, otherwise the NCR5380 won't drive the + /* + * Set the phase bits to 0, otherwise the NCR5380 won't drive the * data bus during SELECTION. */ NCR5380_write(TARGET_COMMAND_REG, 0); - /* + /* * Start arbitration. */ NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask); NCR5380_write(MODE_REG, MR_ARBITRATE); + /* The chip now waits for BUS FREE phase. Then after the 800 ns + * Bus Free Delay, arbitration will begin. + */ - /* We can be relaxed here, interrupts are on, we are - in workqueue context, the birds are singing in the trees */ - spin_unlock_irq(instance->host_lock); - err = NCR5380_poll_politely(instance, INITIATOR_COMMAND_REG, ICR_ARBITRATION_PROGRESS, ICR_ARBITRATION_PROGRESS, 5*HZ); - spin_lock_irq(instance->host_lock); + spin_unlock_irq(&hostdata->lock); + err = NCR5380_poll_politely2(instance, MODE_REG, MR_ARBITRATE, 0, + INITIATOR_COMMAND_REG, ICR_ARBITRATION_PROGRESS, + ICR_ARBITRATION_PROGRESS, HZ); + spin_lock_irq(&hostdata->lock); + if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) { + /* Reselection interrupt */ + goto out; + } if (err < 0) { - printk(KERN_DEBUG "scsi: arbitration timeout at %d\n", __LINE__); NCR5380_write(MODE_REG, MR_BASE); - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - goto failed; + shost_printk(KERN_ERR, instance, + "select: arbitration timeout\n"); + goto out; } + spin_unlock_irq(&hostdata->lock); - dprintk(NDEBUG_ARBITRATION, "scsi%d : arbitration complete\n", instance->host_no); - - /* - * The arbitration delay is 2.2us, but this is a minimum and there is - * no maximum so we can safely sleep for ceil(2.2) usecs to accommodate - * the integral nature of udelay(). - * - */ - + /* The SCSI-2 arbitration delay is 2.4 us */ udelay(3); /* Check for lost arbitration */ - if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) || (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) || (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) { - NCR5380_write(MODE_REG, MR_BASE); - dprintk(NDEBUG_ARBITRATION, "scsi%d : lost arbitration, deasserting MR_ARBITRATE\n", instance->host_no); - goto failed; - } - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_SEL); - - if (!(hostdata->flags & FLAG_DTC3181E) && - /* RvC: DTC3181E has some trouble with this - * so we simply removed it. Seems to work with - * only Mustek scanner attached - */ + if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) || + (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) || (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) { NCR5380_write(MODE_REG, MR_BASE); - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - dprintk(NDEBUG_ARBITRATION, "scsi%d : lost arbitration, deasserting ICR_ASSERT_SEL\n", instance->host_no); - goto failed; + dsprintk(NDEBUG_ARBITRATION, instance, "lost arbitration, deasserting MR_ARBITRATE\n"); + spin_lock_irq(&hostdata->lock); + goto out; } - /* - * Again, bus clear + bus settle time is 1.2us, however, this is + + /* After/during arbitration, BSY should be asserted. + * IBM DPES-31080 Version S31Q works now + * Tnx to Thomas_Roesch@m2.maus.de for finding this! (Roman) + */ + NCR5380_write(INITIATOR_COMMAND_REG, + ICR_BASE | ICR_ASSERT_SEL | ICR_ASSERT_BSY); + + /* + * Again, bus clear + bus settle time is 1.2us, however, this is * a minimum so we'll udelay ceil(1.2) */ - udelay(2); + if (hostdata->flags & FLAG_TOSHIBA_DELAY) + udelay(15); + else + udelay(2); + + spin_lock_irq(&hostdata->lock); + + /* NCR5380_reselect() clears MODE_REG after a reselection interrupt */ + if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) + goto out; + + if (!hostdata->selecting) { + NCR5380_write(MODE_REG, MR_BASE); + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); + goto out; + } - dprintk(NDEBUG_ARBITRATION, "scsi%d : won arbitration\n", instance->host_no); + dsprintk(NDEBUG_ARBITRATION, instance, "won arbitration\n"); - /* - * Now that we have won arbitration, start Selection process, asserting + /* + * Now that we have won arbitration, start Selection process, asserting * the host and target ID's on the SCSI bus. */ - NCR5380_write(OUTPUT_DATA_REG, (hostdata->id_mask | (1 << scmd_id(cmd)))); + NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask | (1 << scmd_id(cmd))); - /* + /* * Raise ATN while SEL is true before BSY goes false from arbitration, * since this is the only way to guarantee that we'll get a MESSAGE OUT * phase immediately after selection. */ - NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_BSY | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL)); + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY | + ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL); NCR5380_write(MODE_REG, MR_BASE); - /* + /* * Reselect interrupts must be turned off prior to the dropping of BSY, * otherwise we will trigger an interrupt. */ NCR5380_write(SELECT_ENABLE_REG, 0); + spin_unlock_irq(&hostdata->lock); + /* - * The initiator shall then wait at least two deskew delays and release + * The initiator shall then wait at least two deskew delays and release * the BSY signal. */ - udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */ + udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */ /* Reset BSY */ - NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL)); + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | + ICR_ASSERT_ATN | ICR_ASSERT_SEL); - /* + /* * Something weird happens when we cease to drive BSY - looks - * like the board/chip is letting us do another read before the + * like the board/chip is letting us do another read before the * appropriate propagation delay has expired, and we're confusing * a BSY signal from ourselves as the target's response to SELECTION. * * A small delay (the 'C++' frontend breaks the pipeline with an * unnecessary jump, making it work on my 386-33/Trantor T128, the - * tighter 'C' code breaks and requires this) solves the problem - - * the 1 us delay is arbitrary, and only used because this delay will - * be the same on other platforms and since it works here, it should + * tighter 'C' code breaks and requires this) solves the problem - + * the 1 us delay is arbitrary, and only used because this delay will + * be the same on other platforms and since it works here, it should * work there. * * wingel suggests that this could be due to failing to wait @@ -1339,50 +1162,43 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) udelay(1); - dprintk(NDEBUG_SELECTION, "scsi%d : selecting target %d\n", instance->host_no, scmd_id(cmd)); + dsprintk(NDEBUG_SELECTION, instance, "selecting target %d\n", scmd_id(cmd)); - /* - * The SCSI specification calls for a 250 ms timeout for the actual + /* + * The SCSI specification calls for a 250 ms timeout for the actual * selection. */ - timeout = jiffies + msecs_to_jiffies(250); - - /* - * XXX very interesting - we're seeing a bounce where the BSY we - * asserted is being reflected / still asserted (propagation delay?) - * and it's detecting as true. Sigh. - */ - - hostdata->select_time = 0; /* we count the clock ticks at which we polled */ - hostdata->selecting = cmd; + err = NCR5380_poll_politely(instance, STATUS_REG, SR_BSY, SR_BSY, + msecs_to_jiffies(250)); -part2: - /* RvC: here we enter after a sleeping period, or immediately after - execution of part 1 - we poll only once ech clock tick */ - value = NCR5380_read(STATUS_REG) & (SR_BSY | SR_IO); - - if (!value && (hostdata->select_time < HZ/4)) { - /* RvC: we still must wait for a device response */ - hostdata->select_time++; /* after 25 ticks the device has failed */ - NCR5380_set_timer(hostdata, 1); - return 0; /* RvC: we return here with hostdata->selecting set, - to go to sleep */ - } - - hostdata->selecting = NULL;/* clear this pointer, because we passed the - waiting period */ if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) == (SR_SEL | SR_IO)) { + spin_lock_irq(&hostdata->lock); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); NCR5380_reselect(instance); - printk("scsi%d : reselection after won arbitration?\n", instance->host_no); + if (!hostdata->connected) + NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); + shost_printk(KERN_ERR, instance, "reselection after won arbitration?\n"); + goto out; + } + + if (err < 0) { + spin_lock_irq(&hostdata->lock); + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - return -1; + /* Can't touch cmd if it has been reclaimed by the scsi ML */ + if (hostdata->selecting) { + cmd->result = DID_BAD_TARGET << 16; + complete_cmd(instance, cmd); + dsprintk(NDEBUG_SELECTION, instance, "target did not respond within 250ms\n"); + cmd = NULL; + } + goto out; } - /* - * No less than two deskew delays after the initiator detects the - * BSY signal is true, it shall release the SEL signal and may + + /* + * No less than two deskew delays after the initiator detects the + * BSY signal is true, it shall release the SEL signal and may * change the DATA BUS. -wingel */ @@ -1390,53 +1206,38 @@ part2: NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); - if (!(NCR5380_read(STATUS_REG) & SR_BSY)) { - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - if (hostdata->targets_present & (1 << scmd_id(cmd))) { - printk(KERN_DEBUG "scsi%d : weirdness\n", instance->host_no); - if (hostdata->restart_select) - printk(KERN_DEBUG "\trestart select\n"); - NCR5380_dprint(NDEBUG_SELECTION, instance); - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - return -1; - } - cmd->result = DID_BAD_TARGET << 16; - cmd->scsi_done(cmd); - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - dprintk(NDEBUG_SELECTION, "scsi%d : target did not respond within 250ms\n", instance->host_no); - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - return 0; - } - hostdata->targets_present |= (1 << scmd_id(cmd)); - /* - * Since we followed the SCSI spec, and raised ATN while SEL + * Since we followed the SCSI spec, and raised ATN while SEL * was true but before BSY was false during selection, the information * transfer phase should be a MESSAGE OUT phase so that we can send the * IDENTIFY message. - * + * * If SCSI-II tagged queuing is enabled, we also send a SIMPLE_QUEUE_TAG * message (2 bytes) with a tag ID that we increment with every command * until it wraps back to 0. * * XXX - it turns out that there are some broken SCSI-II devices, - * which claim to support tagged queuing but fail when more than - * some number of commands are issued at once. + * which claim to support tagged queuing but fail when more than + * some number of commands are issued at once. */ /* Wait for start of REQ/ACK handshake */ - spin_unlock_irq(instance->host_lock); err = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ); - spin_lock_irq(instance->host_lock); - - if(err) { - printk(KERN_ERR "scsi%d: timeout at NCR5380.c:%d\n", instance->host_no, __LINE__); + spin_lock_irq(&hostdata->lock); + if (err < 0) { + shost_printk(KERN_ERR, instance, "select: REQ timeout\n"); + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - goto failed; + goto out; + } + if (!hostdata->selecting) { + do_abort(instance); + goto out; } - dprintk(NDEBUG_SELECTION, "scsi%d : target %d selected, going into MESSAGE OUT phase.\n", instance->host_no, cmd->device->id); + dsprintk(NDEBUG_SELECTION, instance, "target %d selected, going into MESSAGE OUT phase.\n", + scmd_id(cmd)); tmp[0] = IDENTIFY(((instance->irq == NO_IRQ) ? 0 : 1), cmd->device->lun); len = 1; @@ -1446,104 +1247,82 @@ part2: data = tmp; phase = PHASE_MSGOUT; NCR5380_transfer_pio(instance, &phase, &len, &data); - dprintk(NDEBUG_SELECTION, "scsi%d : nexus established.\n", instance->host_no); + dsprintk(NDEBUG_SELECTION, instance, "nexus established.\n"); /* XXX need to handle errors here */ + hostdata->connected = cmd; - hostdata->busy[cmd->device->id] |= (1 << (cmd->device->lun & 0xFF)); + hostdata->busy[cmd->device->id] |= 1 << cmd->device->lun; initialize_SCp(cmd); - return 0; - - /* Selection failed */ -failed: - return -1; + cmd = NULL; +out: + if (!hostdata->selecting) + return NULL; + hostdata->selecting = NULL; + return cmd; } -/* - * Function : int NCR5380_transfer_pio (struct Scsi_Host *instance, - * unsigned char *phase, int *count, unsigned char **data) +/* + * Function : int NCR5380_transfer_pio (struct Scsi_Host *instance, + * unsigned char *phase, int *count, unsigned char **data) * * Purpose : transfers data in given phase using polled I/O * - * Inputs : instance - instance of driver, *phase - pointer to - * what phase is expected, *count - pointer to number of - * bytes to transfer, **data - pointer to data pointer. - * + * Inputs : instance - instance of driver, *phase - pointer to + * what phase is expected, *count - pointer to number of + * bytes to transfer, **data - pointer to data pointer. + * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes or transferred or exit - * is in same phase. + * maximum number of bytes, 0 if all bytes are transferred or exit + * is in same phase. * - * Also, *phase, *count, *data are modified in place. + * Also, *phase, *count, *data are modified in place. * * XXX Note : handling for bus free may be useful. */ /* - * Note : this code is not as quick as it could be, however it + * Note : this code is not as quick as it could be, however it * IS 100% reliable, and for the actual data transfer where speed * counts, we will always do a pseudo DMA or DMA transfer. */ -static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data) { - NCR5380_local_declare(); +static int NCR5380_transfer_pio(struct Scsi_Host *instance, + unsigned char *phase, int *count, + unsigned char **data) +{ unsigned char p = *phase, tmp; int c = *count; unsigned char *d = *data; - /* - * RvC: some administrative data to process polling time - */ - int break_allowed = 0; - struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; - NCR5380_setup(instance); - - if (!(p & SR_IO)) - dprintk(NDEBUG_PIO, "scsi%d : pio write %d bytes\n", instance->host_no, c); - else - dprintk(NDEBUG_PIO, "scsi%d : pio read %d bytes\n", instance->host_no, c); - /* - * The NCR5380 chip will only drive the SCSI bus when the + /* + * The NCR5380 chip will only drive the SCSI bus when the * phase specified in the appropriate bits of the TARGET COMMAND * REGISTER match the STATUS REGISTER */ - NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p)); + NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p)); - /* RvC: don't know if this is necessary, but other SCSI I/O is short - * so breaks are not necessary there - */ - if ((p == PHASE_DATAIN) || (p == PHASE_DATAOUT)) { - break_allowed = 1; - } do { - /* - * Wait for assertion of REQ, after which the phase bits will be - * valid - */ - - /* RvC: we simply poll once, after that we stop temporarily - * and let the device buffer fill up - * if breaking is not allowed, we keep polling as long as needed + /* + * Wait for assertion of REQ, after which the phase bits will be + * valid */ - /* FIXME */ - while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ) && !break_allowed); - if (!(tmp & SR_REQ)) { - /* timeout condition */ - NCR5380_set_timer(hostdata, USLEEP_SLEEP); + if (NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ) < 0) break; - } - dprintk(NDEBUG_HANDSHAKE, "scsi%d : REQ detected\n", instance->host_no); + dsprintk(NDEBUG_HANDSHAKE, instance, "REQ asserted\n"); /* Check for phase mismatch */ - if ((tmp & PHASE_MASK) != p) { - dprintk(NDEBUG_HANDSHAKE, "scsi%d : phase mismatch\n", instance->host_no); - NCR5380_dprint_phase(NDEBUG_HANDSHAKE, instance); + if ((NCR5380_read(STATUS_REG) & PHASE_MASK) != p) { + dsprintk(NDEBUG_PIO, instance, "phase mismatch\n"); + NCR5380_dprint_phase(NDEBUG_PIO, instance); break; } + /* Do actual transfer from SCSI bus to / from memory */ if (!(p & SR_IO)) NCR5380_write(OUTPUT_DATA_REG, *d); @@ -1552,7 +1331,7 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase ++d; - /* + /* * The SCSI standard suggests that in MSGOUT phase, the initiator * should drop ATN on the last byte of the message phase * after REQ has been asserted for the handshake but before @@ -1563,29 +1342,34 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase if (!((p & SR_MSG) && c > 1)) { NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA); NCR5380_dprint(NDEBUG_PIO, instance); - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ACK); + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | + ICR_ASSERT_DATA | ICR_ASSERT_ACK); } else { - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ATN); + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | + ICR_ASSERT_DATA | ICR_ASSERT_ATN); NCR5380_dprint(NDEBUG_PIO, instance); - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK); + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | + ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK); } } else { NCR5380_dprint(NDEBUG_PIO, instance); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK); } - /* FIXME - if this fails bus reset ?? */ - NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 5*HZ); - dprintk(NDEBUG_HANDSHAKE, "scsi%d : req false, handshake complete\n", instance->host_no); + if (NCR5380_poll_politely(instance, + STATUS_REG, SR_REQ, 0, 5 * HZ) < 0) + break; + + dsprintk(NDEBUG_HANDSHAKE, instance, "REQ negated, handshake complete\n"); /* - * We have several special cases to consider during REQ/ACK handshaking : - * 1. We were in MSGOUT phase, and we are on the last byte of the - * message. ATN must be dropped as ACK is dropped. + * We have several special cases to consider during REQ/ACK handshaking : + * 1. We were in MSGOUT phase, and we are on the last byte of the + * message. ATN must be dropped as ACK is dropped. * - * 2. We are in a MSGIN phase, and we are on the last byte of the - * message. We must exit with ACK asserted, so that the calling - * code may raise ATN before dropping ACK to reject the message. + * 2. We are in a MSGIN phase, and we are on the last byte of the + * message. We must exit with ACK asserted, so that the calling + * code may raise ATN before dropping ACK to reject the message. * * 3. ACK and ATN are clear and the target may proceed as normal. */ @@ -1597,12 +1381,16 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase } } while (--c); - dprintk(NDEBUG_PIO, "scsi%d : residual %d\n", instance->host_no, c); + dsprintk(NDEBUG_PIO, instance, "residual %d\n", c); *count = c; *data = d; tmp = NCR5380_read(STATUS_REG); - if (tmp & SR_REQ) + /* The phase read from the bus is valid if either REQ is (already) + * asserted or if ACK hasn't been released yet. The latter applies if + * we're in MSG IN, DATA IN or STATUS and all bytes have been received. + */ + if ((tmp & SR_REQ) || ((tmp & SR_IO) && c == 0)) *phase = tmp & PHASE_MASK; else *phase = PHASE_UNKNOWN; @@ -1614,79 +1402,80 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase } /** - * do_reset - issue a reset command - * @host: adapter to reset + * do_reset - issue a reset command + * @instance: adapter to reset * - * Issue a reset sequence to the NCR5380 and try and get the bus - * back into sane shape. + * Issue a reset sequence to the NCR5380 and try and get the bus + * back into sane shape. * - * Locks: caller holds queue lock + * This clears the reset interrupt flag because there may be no handler for + * it. When the driver is initialized, the NCR5380_intr() handler has not yet + * been installed. And when in EH we may have released the ST DMA interrupt. */ - -static void do_reset(struct Scsi_Host *host) { - NCR5380_local_declare(); - NCR5380_setup(host); - NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK)); +static void do_reset(struct Scsi_Host *instance) +{ + unsigned long flags; + + local_irq_save(flags); + NCR5380_write(TARGET_COMMAND_REG, + PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK)); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST); - udelay(25); + udelay(50); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); + (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG); + local_irq_restore(flags); } -/* - * Function : do_abort (Scsi_Host *host) - * - * Purpose : abort the currently established nexus. Should only be - * called from a routine which can drop into a - * - * Returns : 0 on success, -1 on failure. - * - * Locks: queue lock held by caller - * FIXME: sort this out and get new_eh running +/** + * do_abort - abort the currently established nexus by going to + * MESSAGE OUT phase and sending an ABORT message. + * @instance: relevant scsi host instance + * + * Returns 0 on success, -1 on failure. */ -static int do_abort(struct Scsi_Host *host) { - NCR5380_local_declare(); +static int do_abort(struct Scsi_Host *instance) +{ unsigned char *msgptr, phase, tmp; int len; int rc; - NCR5380_setup(host); - /* Request message out phase */ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); - /* - * Wait for the target to indicate a valid phase by asserting - * REQ. Once this happens, we'll have either a MSGOUT phase - * and can immediately send the ABORT message, or we'll have some + /* + * Wait for the target to indicate a valid phase by asserting + * REQ. Once this happens, we'll have either a MSGOUT phase + * and can immediately send the ABORT message, or we'll have some * other phase and will have to source/sink data. - * + * * We really don't care what value was on the bus or what value * the target sees, so we just handshake. */ - rc = NCR5380_poll_politely(host, STATUS_REG, SR_REQ, SR_REQ, 60 * HZ); - - if(rc < 0) - return -1; + rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 10 * HZ); + if (rc < 0) + goto timeout; + + tmp = NCR5380_read(STATUS_REG) & PHASE_MASK; - tmp = (unsigned char)rc; - NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp)); - if ((tmp & PHASE_MASK) != PHASE_MSGOUT) { - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK); - rc = NCR5380_poll_politely(host, STATUS_REG, SR_REQ, 0, 3*HZ); + if (tmp != PHASE_MSGOUT) { + NCR5380_write(INITIATOR_COMMAND_REG, + ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK); + rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 3 * HZ); + if (rc < 0) + goto timeout; NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); - if(rc == -1) - return -1; } + tmp = ABORT; msgptr = &tmp; len = 1; phase = PHASE_MSGOUT; - NCR5380_transfer_pio(host, &phase, &len, &msgptr); + NCR5380_transfer_pio(instance, &phase, &len, &msgptr); /* * If we got here, and the command completed successfully, @@ -1694,32 +1483,37 @@ static int do_abort(struct Scsi_Host *host) { */ return len ? -1 : 0; + +timeout: + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); + return -1; } #if defined(REAL_DMA) || defined(PSEUDO_DMA) || defined (REAL_DMA_POLL) -/* - * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance, - * unsigned char *phase, int *count, unsigned char **data) +/* + * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance, + * unsigned char *phase, int *count, unsigned char **data) * * Purpose : transfers data in given phase using either real - * or pseudo DMA. + * or pseudo DMA. * - * Inputs : instance - instance of driver, *phase - pointer to - * what phase is expected, *count - pointer to number of - * bytes to transfer, **data - pointer to data pointer. - * - * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes or transferred or exit - * is in same phase. + * Inputs : instance - instance of driver, *phase - pointer to + * what phase is expected, *count - pointer to number of + * bytes to transfer, **data - pointer to data pointer. * - * Also, *phase, *count, *data are modified in place. + * Returns : -1 when different phase is entered without transferring + * maximum number of bytes, 0 if all bytes or transferred or exit + * is in same phase. * - * Locks: io_request lock held by caller + * Also, *phase, *count, *data are modified in place. */ -static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data) { - NCR5380_local_declare(); +static int NCR5380_transfer_dma(struct Scsi_Host *instance, + unsigned char *phase, int *count, + unsigned char **data) +{ + struct NCR5380_hostdata *hostdata = shost_priv(instance); register int c = *count; register unsigned char p = *phase; register unsigned char *d = *data; @@ -1730,54 +1524,47 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase unsigned char saved_data = 0, overrun = 0, residue; #endif - struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; - - NCR5380_setup(instance); - if ((tmp = (NCR5380_read(STATUS_REG) & PHASE_MASK)) != p) { *phase = tmp; return -1; } #if defined(REAL_DMA) || defined(REAL_DMA_POLL) -#ifdef READ_OVERRUNS if (p & SR_IO) { - c -= 2; + if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS)) + c -= 2; } -#endif - dprintk(NDEBUG_DMA, "scsi%d : initializing DMA channel %d for %s, %d bytes %s %0x\n", instance->host_no, instance->dma_channel, (p & SR_IO) ? "reading" : "writing", c, (p & SR_IO) ? "to" : "from", (unsigned) d); hostdata->dma_len = (p & SR_IO) ? NCR5380_dma_read_setup(instance, d, c) : NCR5380_dma_write_setup(instance, d, c); + + dsprintk(NDEBUG_DMA, instance, "initializing DMA %s: length %d, address %p\n", + (p & SR_IO) ? "receive" : "send", c, *data); #endif NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p)); #ifdef REAL_DMA - NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_ENABLE_EOP_INTR | MR_MONITOR_BSY); + NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY | + MR_ENABLE_EOP_INTR); #elif defined(REAL_DMA_POLL) - NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE); + NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY); #else /* * Note : on my sample board, watch-dog timeouts occurred when interrupts - * were not disabled for the duration of a single DMA transfer, from + * were not disabled for the duration of a single DMA transfer, from * before the setting of DMA mode to after transfer of the last byte. */ -#if defined(PSEUDO_DMA) && defined(UNSAFE) - spin_unlock_irq(instance->host_lock); -#endif - /* KLL May need eop and parity in 53c400 */ - if (hostdata->flags & FLAG_NCR53C400) - NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | - MR_ENABLE_PAR_CHECK | MR_ENABLE_PAR_INTR | - MR_ENABLE_EOP_INTR | MR_MONITOR_BSY); + if (hostdata->flags & FLAG_NO_DMA_FIXUP) + NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY | + MR_ENABLE_EOP_INTR); else - NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE); + NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY); #endif /* def REAL_DMA */ dprintk(NDEBUG_DMA, "scsi%d : mode reg = 0x%X\n", instance->host_no, NCR5380_read(MODE_REG)); - /* - * On the PAS16 at least I/O recovery delays are not needed here. - * Everyone else seems to want them. + /* + * On the PAS16 at least I/O recovery delays are not needed here. + * Everyone else seems to want them. */ if (p & SR_IO) { @@ -1797,49 +1584,49 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase } while ((tmp & BASR_PHASE_MATCH) && !(tmp & (BASR_BUSY_ERROR | BASR_END_DMA_TRANSFER))); /* - At this point, either we've completed DMA, or we have a phase mismatch, - or we've unexpectedly lost BUSY (which is a real error). - - For write DMAs, we want to wait until the last byte has been - transferred out over the bus before we turn off DMA mode. Alas, there - seems to be no terribly good way of doing this on a 5380 under all - conditions. For non-scatter-gather operations, we can wait until REQ - and ACK both go false, or until a phase mismatch occurs. Gather-writes - are nastier, since the device will be expecting more data than we - are prepared to send it, and REQ will remain asserted. On a 53C8[01] we - could test LAST BIT SENT to assure transfer (I imagine this is precisely - why this signal was added to the newer chips) but on the older 538[01] - this signal does not exist. The workaround for this lack is a watchdog; - we bail out of the wait-loop after a modest amount of wait-time if - the usual exit conditions are not met. Not a terribly clean or - correct solution :-% - - Reads are equally tricky due to a nasty characteristic of the NCR5380. - If the chip is in DMA mode for an READ, it will respond to a target's - REQ by latching the SCSI data into the INPUT DATA register and asserting - ACK, even if it has _already_ been notified by the DMA controller that - the current DMA transfer has completed! If the NCR5380 is then taken - out of DMA mode, this already-acknowledged byte is lost. - - This is not a problem for "one DMA transfer per command" reads, because - the situation will never arise... either all of the data is DMA'ed - properly, or the target switches to MESSAGE IN phase to signal a - disconnection (either operation bringing the DMA to a clean halt). - However, in order to handle scatter-reads, we must work around the - problem. The chosen fix is to DMA N-2 bytes, then check for the - condition before taking the NCR5380 out of DMA mode. One or two extra - bytes are transferred via PIO as necessary to fill out the original - request. + * At this point, either we've completed DMA, or we have a phase mismatch, + * or we've unexpectedly lost BUSY (which is a real error). + * + * For DMA sends, we want to wait until the last byte has been + * transferred out over the bus before we turn off DMA mode. Alas, there + * seems to be no terribly good way of doing this on a 5380 under all + * conditions. For non-scatter-gather operations, we can wait until REQ + * and ACK both go false, or until a phase mismatch occurs. Gather-sends + * are nastier, since the device will be expecting more data than we + * are prepared to send it, and REQ will remain asserted. On a 53C8[01] we + * could test Last Byte Sent to assure transfer (I imagine this is precisely + * why this signal was added to the newer chips) but on the older 538[01] + * this signal does not exist. The workaround for this lack is a watchdog; + * we bail out of the wait-loop after a modest amount of wait-time if + * the usual exit conditions are not met. Not a terribly clean or + * correct solution :-% + * + * DMA receive is equally tricky due to a nasty characteristic of the NCR5380. + * If the chip is in DMA receive mode, it will respond to a target's + * REQ by latching the SCSI data into the INPUT DATA register and asserting + * ACK, even if it has _already_ been notified by the DMA controller that + * the current DMA transfer has completed! If the NCR5380 is then taken + * out of DMA mode, this already-acknowledged byte is lost. This is + * not a problem for "one DMA transfer per READ command", because + * the situation will never arise... either all of the data is DMA'ed + * properly, or the target switches to MESSAGE IN phase to signal a + * disconnection (either operation bringing the DMA to a clean halt). + * However, in order to handle scatter-receive, we must work around the + * problem. The chosen fix is to DMA N-2 bytes, then check for the + * condition before taking the NCR5380 out of DMA mode. One or two extra + * bytes are transferred via PIO as necessary to fill out the original + * request. */ if (p & SR_IO) { -#ifdef READ_OVERRUNS - udelay(10); - if (((NCR5380_read(BUS_AND_STATUS_REG) & (BASR_PHASE_MATCH | BASR_ACK)) == (BASR_PHASE_MATCH | BASR_ACK))) { - saved_data = NCR5380_read(INPUT_DATA_REGISTER); - overrun = 1; + if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS)) { + udelay(10); + if ((NCR5380_read(BUS_AND_STATUS_REG) & (BASR_PHASE_MATCH | BASR_ACK)) == + (BASR_PHASE_MATCH | BASR_ACK)) { + saved_data = NCR5380_read(INPUT_DATA_REGISTER); + overrun = 1; + } } -#endif } else { int limit = 100; while (((tmp = NCR5380_read(BUS_AND_STATUS_REG)) & BASR_ACK) || (NCR5380_read(STATUS_REG) & SR_REQ)) { @@ -1850,7 +1637,8 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase } } - dprintk(NDEBUG_DMA, "scsi%d : polled DMA transfer complete, basr 0x%X, sr 0x%X\n", instance->host_no, tmp, NCR5380_read(STATUS_REG)); + dsprintk(NDEBUG_DMA, "polled DMA transfer complete, basr 0x%02x, sr 0x%02x\n", + tmp, NCR5380_read(STATUS_REG)); NCR5380_write(MODE_REG, MR_BASE); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); @@ -1861,8 +1649,8 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase *data += c; *phase = NCR5380_read(STATUS_REG) & PHASE_MASK; -#ifdef READ_OVERRUNS - if (*phase == p && (p & SR_IO) && residue == 0) { + if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS) && + *phase == p && (p & SR_IO) && residue == 0) { if (overrun) { dprintk(NDEBUG_DMA, "Got an input overrun, using saved byte\n"); **data = saved_data; @@ -1877,7 +1665,6 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase NCR5380_transfer_pio(instance, phase, &cnt, data); *count -= toPIO - cnt; } -#endif dprintk(NDEBUG_DMA, "Return with data ptr = 0x%X, count %d, last 0x%X, next 0x%X\n", *data, *count, *(*data + *count - 1), *(*data + *count)); return 0; @@ -1886,95 +1673,64 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase return 0; #else /* defined(REAL_DMA_POLL) */ if (p & SR_IO) { -#ifdef DMA_WORKS_RIGHT - foo = NCR5380_pread(instance, d, c); -#else - int diff = 1; - if (hostdata->flags & FLAG_NCR53C400) { - diff = 0; - } - if (!(foo = NCR5380_pread(instance, d, c - diff))) { + foo = NCR5380_pread(instance, d, + hostdata->flags & FLAG_NO_DMA_FIXUP ? c : c - 1); + if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) { /* - * We can't disable DMA mode after successfully transferring + * We can't disable DMA mode after successfully transferring * what we plan to be the last byte, since that would open up - * a race condition where if the target asserted REQ before + * a race condition where if the target asserted REQ before * we got the DMA mode reset, the NCR5380 would have latched * an additional byte into the INPUT DATA register and we'd * have dropped it. - * - * The workaround was to transfer one fewer bytes than we - * intended to with the pseudo-DMA read function, wait for + * + * The workaround was to transfer one fewer bytes than we + * intended to with the pseudo-DMA read function, wait for * the chip to latch the last byte, read it, and then disable * pseudo-DMA mode. - * + * * After REQ is asserted, the NCR5380 asserts DRQ and ACK. * REQ is deasserted when ACK is asserted, and not reasserted * until ACK goes false. Since the NCR5380 won't lower ACK * until DACK is asserted, which won't happen unless we twiddle - * the DMA port or we take the NCR5380 out of DMA mode, we - * can guarantee that we won't handshake another extra + * the DMA port or we take the NCR5380 out of DMA mode, we + * can guarantee that we won't handshake another extra * byte. */ - if (!(hostdata->flags & FLAG_NCR53C400)) { - while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)); - /* Wait for clean handshake */ - while (NCR5380_read(STATUS_REG) & SR_REQ); - d[c - 1] = NCR5380_read(INPUT_DATA_REG); + if (NCR5380_poll_politely(instance, BUS_AND_STATUS_REG, + BASR_DRQ, BASR_DRQ, HZ) < 0) { + foo = -1; + shost_printk(KERN_ERR, instance, "PDMA read: DRQ timeout\n"); + } + if (NCR5380_poll_politely(instance, STATUS_REG, + SR_REQ, 0, HZ) < 0) { + foo = -1; + shost_printk(KERN_ERR, instance, "PDMA read: !REQ timeout\n"); } + d[c - 1] = NCR5380_read(INPUT_DATA_REG); } -#endif } else { -#ifdef DMA_WORKS_RIGHT foo = NCR5380_pwrite(instance, d, c); -#else - int timeout; - dprintk(NDEBUG_C400_PWRITE, "About to pwrite %d bytes\n", c); - if (!(foo = NCR5380_pwrite(instance, d, c))) { + if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) { /* - * Wait for the last byte to be sent. If REQ is being asserted for - * the byte we're interested, we'll ACK it and it will go false. + * Wait for the last byte to be sent. If REQ is being asserted for + * the byte we're interested, we'll ACK it and it will go false. */ - if (!(hostdata->flags & FLAG_HAS_LAST_BYTE_SENT)) { - timeout = 20000; - while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) && (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)); - - if (!timeout) - dprintk(NDEBUG_LAST_BYTE_SENT, "scsi%d : timed out on last byte\n", instance->host_no); - - if (hostdata->flags & FLAG_CHECK_LAST_BYTE_SENT) { - hostdata->flags &= ~FLAG_CHECK_LAST_BYTE_SENT; - if (NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT) { - hostdata->flags |= FLAG_HAS_LAST_BYTE_SENT; - dprintk(NDEBUG_LAST_BYTE_SENT, "scsi%d : last byte sent works\n", instance->host_no); - } - } - } else { - dprintk(NDEBUG_C400_PWRITE, "Waiting for LASTBYTE\n"); - while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT)); - dprintk(NDEBUG_C400_PWRITE, "Got LASTBYTE\n"); + if (NCR5380_poll_politely2(instance, + BUS_AND_STATUS_REG, BASR_DRQ, BASR_DRQ, + BUS_AND_STATUS_REG, BASR_PHASE_MATCH, 0, HZ) < 0) { + foo = -1; + shost_printk(KERN_ERR, instance, "PDMA write: DRQ and phase timeout\n"); } } -#endif } NCR5380_write(MODE_REG, MR_BASE); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - - if ((!(p & SR_IO)) && (hostdata->flags & FLAG_NCR53C400)) { - dprintk(NDEBUG_C400_PWRITE, "53C400w: Checking for IRQ\n"); - if (NCR5380_read(BUS_AND_STATUS_REG) & BASR_IRQ) { - dprintk(NDEBUG_C400_PWRITE, "53C400w: got it, reading reset interrupt reg\n"); - NCR5380_read(RESET_PARITY_INTERRUPT_REG); - } else { - printk("53C400w: IRQ NOT THERE!\n"); - } - } + NCR5380_read(RESET_PARITY_INTERRUPT_REG); *data = d + c; *count = 0; *phase = NCR5380_read(STATUS_REG) & PHASE_MASK; -#if defined(PSEUDO_DMA) && defined(UNSAFE) - spin_lock_irq(instance->host_lock); -#endif /* defined(REAL_DMA_POLL) */ return foo; #endif /* def REAL_DMA */ } @@ -1983,25 +1739,23 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase /* * Function : NCR5380_information_transfer (struct Scsi_Host *instance) * - * Purpose : run through the various SCSI phases and do as the target - * directs us to. Operates on the currently connected command, - * instance->connected. + * Purpose : run through the various SCSI phases and do as the target + * directs us to. Operates on the currently connected command, + * instance->connected. * * Inputs : instance, instance for which we are doing commands * - * Side effects : SCSI things happen, the disconnected queue will be - * modified if a command disconnects, *instance->connected will - * change. - * - * XXX Note : we need to watch for bus free or a reset condition here - * to recover from an unexpected bus free condition. + * Side effects : SCSI things happen, the disconnected queue will be + * modified if a command disconnects, *instance->connected will + * change. * - * Locks: io_request_lock held by caller in IRQ mode + * XXX Note : we need to watch for bus free or a reset condition here + * to recover from an unexpected bus free condition. */ -static void NCR5380_information_transfer(struct Scsi_Host *instance) { - NCR5380_local_declare(); - struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *)instance->hostdata; +static void NCR5380_information_transfer(struct Scsi_Host *instance) +{ + struct NCR5380_hostdata *hostdata = shost_priv(instance); unsigned char msgout = NOP; int sink = 0; int len; @@ -2010,13 +1764,11 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) { #endif unsigned char *data; unsigned char phase, tmp, extended_msg[10], old_phase = 0xff; - struct scsi_cmnd *cmd = (struct scsi_cmnd *) hostdata->connected; - /* RvC: we need to set the end of the polling time */ - unsigned long poll_time = jiffies + USLEEP_POLL; + struct scsi_cmnd *cmd; - NCR5380_setup(instance); + while ((cmd = hostdata->connected)) { + struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd); - while (1) { tmp = NCR5380_read(STATUS_REG); /* We only have a valid SCSI phase when REQ is asserted */ if (tmp & SR_REQ) { @@ -2028,24 +1780,28 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) { if (sink && (phase != PHASE_MSGOUT)) { NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp)); - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK); - while (NCR5380_read(STATUS_REG) & SR_REQ); - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | + ICR_ASSERT_ACK); + while (NCR5380_read(STATUS_REG) & SR_REQ) + ; + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | + ICR_ASSERT_ATN); sink = 0; continue; } + switch (phase) { - case PHASE_DATAIN: case PHASE_DATAOUT: #if (NDEBUG & NDEBUG_NO_DATAOUT) - printk("scsi%d : NDEBUG_NO_DATAOUT set, attempted DATAOUT aborted\n", instance->host_no); + shost_printk(KERN_DEBUG, instance, "NDEBUG_NO_DATAOUT set, attempted DATAOUT aborted\n"); sink = 1; do_abort(instance); cmd->result = DID_ERROR << 16; - cmd->scsi_done(cmd); + complete_cmd(instance, cmd); return; #endif - /* + case PHASE_DATAIN: + /* * If there is no room left in the current buffer in the * scatter-gather list, move onto the next one. */ @@ -2055,10 +1811,13 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) { --cmd->SCp.buffers_residual; cmd->SCp.this_residual = cmd->SCp.buffer->length; cmd->SCp.ptr = sg_virt(cmd->SCp.buffer); - dprintk(NDEBUG_INFORMATION, "scsi%d : %d bytes and %d buffers left\n", instance->host_no, cmd->SCp.this_residual, cmd->SCp.buffers_residual); + dsprintk(NDEBUG_INFORMATION, instance, "%d bytes and %d buffers left\n", + cmd->SCp.this_residual, + cmd->SCp.buffers_residual); } + /* - * The preferred transfer method is going to be + * The preferred transfer method is going to be * PSEUDO-DMA for systems that are strictly PIO, * since we can let the hardware do the handshaking. * @@ -2068,50 +1827,39 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) { */ #if defined(PSEUDO_DMA) || defined(REAL_DMA_POLL) - /* KLL - * PSEUDO_DMA is defined here. If this is the g_NCR5380 - * driver then it will always be defined, so the - * FLAG_NO_PSEUDO_DMA is used to inhibit PDMA in the base - * NCR5380 case. I think this is a fairly clean solution. - * We supplement these 2 if's with the flag. - */ -#ifdef NCR5380_dma_xfer_len - if (!cmd->device->borken && !(hostdata->flags & FLAG_NO_PSEUDO_DMA) && (transfersize = NCR5380_dma_xfer_len(instance, cmd)) != 0) { -#else - transfersize = cmd->transfersize; - -#ifdef LIMIT_TRANSFERSIZE /* If we have problems with interrupt service */ - if (transfersize > 512) - transfersize = 512; -#endif /* LIMIT_TRANSFERSIZE */ - - if (!cmd->device->borken && transfersize && !(hostdata->flags & FLAG_NO_PSEUDO_DMA) && cmd->SCp.this_residual && !(cmd->SCp.this_residual % transfersize)) { - /* Limit transfers to 32K, for xx400 & xx406 - * pseudoDMA that transfers in 128 bytes blocks. */ - if (transfersize > 32 * 1024) - transfersize = 32 * 1024; -#endif + transfersize = 0; + if (!cmd->device->borken && + !(hostdata->flags & FLAG_NO_PSEUDO_DMA)) + transfersize = NCR5380_dma_xfer_len(instance, cmd, phase); + + if (transfersize) { len = transfersize; - if (NCR5380_transfer_dma(instance, &phase, &len, (unsigned char **) &cmd->SCp.ptr)) { + if (NCR5380_transfer_dma(instance, &phase, + &len, (unsigned char **)&cmd->SCp.ptr)) { /* - * If the watchdog timer fires, all future accesses to this - * device will use the polled-IO. + * If the watchdog timer fires, all future + * accesses to this device will use the + * polled-IO. */ scmd_printk(KERN_INFO, cmd, - "switching to slow handshake\n"); + "switching to slow handshake\n"); cmd->device->borken = 1; - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); sink = 1; do_abort(instance); cmd->result = DID_ERROR << 16; - cmd->scsi_done(cmd); + complete_cmd(instance, cmd); /* XXX - need to source or sink data here, as appropriate */ } else cmd->SCp.this_residual -= transfersize - len; } else #endif /* defined(PSEUDO_DMA) || defined(REAL_DMA_POLL) */ - NCR5380_transfer_pio(instance, &phase, (int *) &cmd->SCp.this_residual, (unsigned char **) - &cmd->SCp.ptr); + { + spin_unlock_irq(&hostdata->lock); + NCR5380_transfer_pio(instance, &phase, + (int *)&cmd->SCp.this_residual, + (unsigned char **)&cmd->SCp.ptr); + spin_lock_irq(&hostdata->lock); + } break; case PHASE_MSGIN: len = 1; @@ -2120,101 +1868,42 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) { cmd->SCp.Message = tmp; switch (tmp) { - /* - * Linking lets us reduce the time required to get the - * next command out to the device, hopefully this will - * mean we don't waste another revolution due to the delays - * required by ARBITRATION and another SELECTION. - * - * In the current implementation proposal, low level drivers - * merely have to start the next command, pointed to by - * next_link, done() is called as with unlinked commands. - */ -#ifdef LINKED - case LINKED_CMD_COMPLETE: - case LINKED_FLG_CMD_COMPLETE: - /* Accept message by clearing ACK */ - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - dprintk(NDEBUG_LINKED, "scsi%d : target %d lun %llu linked command complete.\n", instance->host_no, cmd->device->id, cmd->device->lun); - /* - * Sanity check : A linked command should only terminate with - * one of these messages if there are more linked commands - * available. - */ - if (!cmd->next_link) { - printk("scsi%d : target %d lun %llu linked command complete, no next_link\n" instance->host_no, cmd->device->id, cmd->device->lun); - sink = 1; - do_abort(instance); - return; - } - initialize_SCp(cmd->next_link); - /* The next command is still part of this process */ - cmd->next_link->tag = cmd->tag; - cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8); - dprintk(NDEBUG_LINKED, "scsi%d : target %d lun %llu linked request done, calling scsi_done().\n", instance->host_no, cmd->device->id, cmd->device->lun); - cmd->scsi_done(cmd); - cmd = hostdata->connected; - break; -#endif /* def LINKED */ case ABORT: case COMMAND_COMPLETE: /* Accept message by clearing ACK */ sink = 1; NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - hostdata->connected = NULL; - dprintk(NDEBUG_QUEUES, "scsi%d : command for target %d, lun %llu completed\n", instance->host_no, cmd->device->id, cmd->device->lun); - hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun & 0xFF)); - - /* - * I'm not sure what the correct thing to do here is : - * - * If the command that just executed is NOT a request - * sense, the obvious thing to do is to set the result - * code to the values of the stored parameters. - * - * If it was a REQUEST SENSE command, we need some way - * to differentiate between the failure code of the original - * and the failure code of the REQUEST sense - the obvious - * case is success, where we fall through and leave the result - * code unchanged. - * - * The non-obvious place is where the REQUEST SENSE failed - */ - - if (cmd->cmnd[0] != REQUEST_SENSE) - cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8); - else if (status_byte(cmd->SCp.Status) != GOOD) - cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16); + dsprintk(NDEBUG_QUEUES, instance, + "COMMAND COMPLETE %p target %d lun %llu\n", + cmd, scmd_id(cmd), cmd->device->lun); - if ((cmd->cmnd[0] == REQUEST_SENSE) && - hostdata->ses.cmd_len) { - scsi_eh_restore_cmnd(cmd, &hostdata->ses); - hostdata->ses.cmd_len = 0 ; - } - - if ((cmd->cmnd[0] != REQUEST_SENSE) && (status_byte(cmd->SCp.Status) == CHECK_CONDITION)) { - scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0); - - dprintk(NDEBUG_AUTOSENSE, "scsi%d : performing request sense\n", instance->host_no); + hostdata->connected = NULL; - LIST(cmd, hostdata->issue_queue); - cmd->host_scribble = (unsigned char *) - hostdata->issue_queue; - hostdata->issue_queue = (struct scsi_cmnd *) cmd; - dprintk(NDEBUG_QUEUES, "scsi%d : REQUEST SENSE added to head of issue queue\n", instance->host_no); - } else { - cmd->scsi_done(cmd); + cmd->result &= ~0xffff; + cmd->result |= cmd->SCp.Status; + cmd->result |= cmd->SCp.Message << 8; + + if (cmd->cmnd[0] == REQUEST_SENSE) + complete_cmd(instance, cmd); + else { + if (cmd->SCp.Status == SAM_STAT_CHECK_CONDITION || + cmd->SCp.Status == SAM_STAT_COMMAND_TERMINATED) { + dsprintk(NDEBUG_QUEUES, instance, "autosense: adding cmd %p to tail of autosense queue\n", + cmd); + list_add_tail(&ncmd->list, + &hostdata->autosense); + } else + complete_cmd(instance, cmd); } - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - /* - * Restore phase bits to 0 so an interrupted selection, + /* + * Restore phase bits to 0 so an interrupted selection, * arbitration can resume. */ NCR5380_write(TARGET_COMMAND_REG, 0); - while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected) - barrier(); + /* Enable reselect interrupts */ + NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); return; case MESSAGE_REJECT: /* Accept message by clearing ACK */ @@ -2229,38 +1918,33 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) { default: break; } - case DISCONNECT:{ - /* Accept message by clearing ACK */ - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - cmd->device->disconnect = 1; - LIST(cmd, hostdata->disconnected_queue); - cmd->host_scribble = (unsigned char *) - hostdata->disconnected_queue; - hostdata->connected = NULL; - hostdata->disconnected_queue = cmd; - dprintk(NDEBUG_QUEUES, "scsi%d : command for target %d lun %llu was moved from connected to" " the disconnected_queue\n", instance->host_no, cmd->device->id, cmd->device->lun); - /* - * Restore phase bits to 0 so an interrupted selection, - * arbitration can resume. - */ - NCR5380_write(TARGET_COMMAND_REG, 0); - - /* Enable reselect interrupts */ - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - /* Wait for bus free to avoid nasty timeouts - FIXME timeout !*/ - /* NCR538_poll_politely(instance, STATUS_REG, SR_BSY, 0, 30 * HZ); */ - while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected) - barrier(); - return; - } - /* + break; + case DISCONNECT: + /* Accept message by clearing ACK */ + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); + hostdata->connected = NULL; + list_add(&ncmd->list, &hostdata->disconnected); + dsprintk(NDEBUG_INFORMATION | NDEBUG_QUEUES, + instance, "connected command %p for target %d lun %llu moved to disconnected queue\n", + cmd, scmd_id(cmd), cmd->device->lun); + + /* + * Restore phase bits to 0 so an interrupted selection, + * arbitration can resume. + */ + NCR5380_write(TARGET_COMMAND_REG, 0); + + /* Enable reselect interrupts */ + NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); + return; + /* * The SCSI data pointer is *IMPLICITLY* saved on a disconnect - * operation, in violation of the SCSI spec so we can safely + * operation, in violation of the SCSI spec so we can safely * ignore SAVE/RESTORE pointers calls. * - * Unfortunately, some disks violate the SCSI spec and + * Unfortunately, some disks violate the SCSI spec and * don't issue the required SAVE_POINTERS message before - * disconnecting, and we have to break spec to remain + * disconnecting, and we have to break spec to remain * compatible. */ case SAVE_POINTERS: @@ -2269,31 +1953,28 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) { NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); break; case EXTENDED_MESSAGE: -/* - * Extended messages are sent in the following format : - * Byte - * 0 EXTENDED_MESSAGE == 1 - * 1 length (includes one byte for code, doesn't - * include first two bytes) - * 2 code - * 3..length+1 arguments - * - * Start the extended message buffer with the EXTENDED_MESSAGE - * byte, since spi_print_msg() wants the whole thing. - */ + /* + * Start the message buffer with the EXTENDED_MESSAGE + * byte, since spi_print_msg() wants the whole thing. + */ extended_msg[0] = EXTENDED_MESSAGE; /* Accept first byte by clearing ACK */ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - dprintk(NDEBUG_EXTENDED, "scsi%d : receiving extended message\n", instance->host_no); + + spin_unlock_irq(&hostdata->lock); + + dsprintk(NDEBUG_EXTENDED, instance, "receiving extended message\n"); len = 2; data = extended_msg + 1; phase = PHASE_MSGIN; NCR5380_transfer_pio(instance, &phase, &len, &data); + dsprintk(NDEBUG_EXTENDED, instance, "length %d, code 0x%02x\n", + (int)extended_msg[1], + (int)extended_msg[2]); - dprintk(NDEBUG_EXTENDED, "scsi%d : length=%d, code=0x%02x\n", instance->host_no, (int) extended_msg[1], (int) extended_msg[2]); - - if (!len && extended_msg[1] <= (sizeof(extended_msg) - 1)) { + if (!len && extended_msg[1] > 0 && + extended_msg[1] <= sizeof(extended_msg) - 2) { /* Accept third byte by clearing ACK */ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); len = extended_msg[1] - 1; @@ -2301,7 +1982,8 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) { phase = PHASE_MSGIN; NCR5380_transfer_pio(instance, &phase, &len, &data); - dprintk(NDEBUG_EXTENDED, "scsi%d : message received, residual %d\n", instance->host_no, len); + dsprintk(NDEBUG_EXTENDED, instance, "message received, residual %d\n", + len); switch (extended_msg[2]) { case EXTENDED_SDTR: @@ -2311,34 +1993,42 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) { tmp = 0; } } else if (len) { - printk("scsi%d: error receiving extended message\n", instance->host_no); + shost_printk(KERN_ERR, instance, "error receiving extended message\n"); tmp = 0; } else { - printk("scsi%d: extended message code %02x length %d is too long\n", instance->host_no, extended_msg[2], extended_msg[1]); + shost_printk(KERN_NOTICE, instance, "extended message code %02x length %d is too long\n", + extended_msg[2], extended_msg[1]); tmp = 0; } + + spin_lock_irq(&hostdata->lock); + if (!hostdata->connected) + return; + /* Fall through to reject message */ - /* - * If we get something weird that we aren't expecting, + /* + * If we get something weird that we aren't expecting, * reject it. */ default: if (!tmp) { - printk("scsi%d: rejecting message ", instance->host_no); + shost_printk(KERN_ERR, instance, "rejecting message "); spi_print_msg(extended_msg); printk("\n"); } else if (tmp != EXTENDED_MESSAGE) scmd_printk(KERN_INFO, cmd, - "rejecting unknown message %02x\n",tmp); + "rejecting unknown message %02x\n", + tmp); else scmd_printk(KERN_INFO, cmd, - "rejecting unknown extended message code %02x, length %d\n", extended_msg[1], extended_msg[0]); + "rejecting unknown extended message code %02x, length %d\n", + extended_msg[1], extended_msg[0]); msgout = MESSAGE_REJECT; NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); break; - } /* switch (tmp) */ + } /* switch (tmp) */ break; case PHASE_MSGOUT: len = 1; @@ -2346,10 +2036,9 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) { hostdata->last_message = msgout; NCR5380_transfer_pio(instance, &phase, &len, &data); if (msgout == ABORT) { - hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun & 0xFF)); hostdata->connected = NULL; cmd->result = DID_ERROR << 16; - cmd->scsi_done(cmd); + complete_cmd(instance, cmd); NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); return; } @@ -2358,17 +2047,12 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) { case PHASE_CMDOUT: len = cmd->cmd_len; data = cmd->cmnd; - /* - * XXX for performance reasons, on machines with a - * PSEUDO-DMA architecture we should probably - * use the dma transfer function. + /* + * XXX for performance reasons, on machines with a + * PSEUDO-DMA architecture we should probably + * use the dma transfer function. */ NCR5380_transfer_pio(instance, &phase, &len, &data); - if (!cmd->device->disconnect && should_disconnect(cmd->cmnd[0])) { - NCR5380_set_timer(hostdata, USLEEP_SLEEP); - dprintk(NDEBUG_USLEEP, "scsi%d : issued command, sleeping until %lu\n", instance->host_no, hostdata->time_expires); - return; - } break; case PHASE_STATIN: len = 1; @@ -2377,46 +2061,37 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) { cmd->SCp.Status = tmp; break; default: - printk("scsi%d : unknown phase\n", instance->host_no); + shost_printk(KERN_ERR, instance, "unknown phase\n"); NCR5380_dprint(NDEBUG_ANY, instance); - } /* switch(phase) */ - } /* if (tmp * SR_REQ) */ - else { - /* RvC: go to sleep if polling time expired - */ - if (!cmd->device->disconnect && time_after_eq(jiffies, poll_time)) { - NCR5380_set_timer(hostdata, USLEEP_SLEEP); - dprintk(NDEBUG_USLEEP, "scsi%d : poll timed out, sleeping until %lu\n", instance->host_no, hostdata->time_expires); - return; - } + } /* switch(phase) */ + } else { + spin_unlock_irq(&hostdata->lock); + NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ); + spin_lock_irq(&hostdata->lock); } - } /* while (1) */ + } } /* * Function : void NCR5380_reselect (struct Scsi_Host *instance) * - * Purpose : does reselection, initializing the instance->connected - * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q - * nexus has been reestablished, - * - * Inputs : instance - this instance of the NCR5380. + * Purpose : does reselection, initializing the instance->connected + * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q + * nexus has been reestablished, * - * Locks: io_request_lock held by caller if IRQ driven + * Inputs : instance - this instance of the NCR5380. */ -static void NCR5380_reselect(struct Scsi_Host *instance) { - NCR5380_local_declare(); - struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) - instance->hostdata; +static void NCR5380_reselect(struct Scsi_Host *instance) +{ + struct NCR5380_hostdata *hostdata = shost_priv(instance); unsigned char target_mask; unsigned char lun, phase; int len; unsigned char msg[3]; unsigned char *data; - struct scsi_cmnd *tmp = NULL, *prev; - int abort = 0; - NCR5380_setup(instance); + struct NCR5380_cmd *ncmd; + struct scsi_cmnd *tmp; /* * Disable arbitration, etc. since the host adapter obviously @@ -2424,12 +2099,12 @@ static void NCR5380_reselect(struct Scsi_Host *instance) { */ NCR5380_write(MODE_REG, MR_BASE); - hostdata->restart_select = 1; target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask); - dprintk(NDEBUG_SELECTION, "scsi%d : reselect\n", instance->host_no); - /* + dsprintk(NDEBUG_RESELECTION, instance, "reselect\n"); + + /* * At this point, we have detected that our SCSI ID is on the bus, * SEL is true and BSY was false for at least one bus settle delay * (400 ns). @@ -2439,103 +2114,110 @@ static void NCR5380_reselect(struct Scsi_Host *instance) { */ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY); - - /* FIXME: timeout too long, must fail to workqueue */ - if(NCR5380_poll_politely(instance, STATUS_REG, SR_SEL, 0, 2*HZ)<0) - abort = 1; - + if (NCR5380_poll_politely(instance, + STATUS_REG, SR_SEL, 0, 2 * HZ) < 0) { + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); + return; + } NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); /* * Wait for target to go into MSGIN. - * FIXME: timeout needed and fail to work queeu */ - if(NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 2*HZ)) - abort = 1; + if (NCR5380_poll_politely(instance, + STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0) { + do_abort(instance); + return; + } len = 1; data = msg; phase = PHASE_MSGIN; NCR5380_transfer_pio(instance, &phase, &len, &data); + if (len) { + do_abort(instance); + return; + } + if (!(msg[0] & 0x80)) { - printk(KERN_ERR "scsi%d : expecting IDENTIFY message, got ", instance->host_no); + shost_printk(KERN_ERR, instance, "expecting IDENTIFY message, got "); spi_print_msg(msg); - abort = 1; - } else { - /* Accept message by clearing ACK */ - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - lun = (msg[0] & 0x07); + printk("\n"); + do_abort(instance); + return; + } + lun = msg[0] & 0x07; - /* - * We need to add code for SCSI-II to track which devices have - * I_T_L_Q nexuses established, and which have simple I_T_L - * nexuses so we can chose to do additional data transfer. - */ + /* + * We need to add code for SCSI-II to track which devices have + * I_T_L_Q nexuses established, and which have simple I_T_L + * nexuses so we can chose to do additional data transfer. + */ - /* - * Find the command corresponding to the I_T_L or I_T_L_Q nexus we - * just reestablished, and remove it from the disconnected queue. - */ + /* + * Find the command corresponding to the I_T_L or I_T_L_Q nexus we + * just reestablished, and remove it from the disconnected queue. + */ + tmp = NULL; + list_for_each_entry(ncmd, &hostdata->disconnected, list) { + struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd); - for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL; tmp; prev = tmp, tmp = (struct scsi_cmnd *) tmp->host_scribble) - if ((target_mask == (1 << tmp->device->id)) && (lun == (u8)tmp->device->lun) - ) { - if (prev) { - REMOVE(prev, prev->host_scribble, tmp, tmp->host_scribble); - prev->host_scribble = tmp->host_scribble; - } else { - REMOVE(-1, hostdata->disconnected_queue, tmp, tmp->host_scribble); - hostdata->disconnected_queue = (struct scsi_cmnd *) tmp->host_scribble; - } - tmp->host_scribble = NULL; - break; - } - if (!tmp) { - printk(KERN_ERR "scsi%d : warning : target bitmask %02x lun %d not in disconnect_queue.\n", instance->host_no, target_mask, lun); - /* - * Since we have an established nexus that we can't do anything with, - * we must abort it. - */ - abort = 1; + if (target_mask == (1 << scmd_id(cmd)) && + lun == (u8)cmd->device->lun) { + list_del(&ncmd->list); + tmp = cmd; + break; } } - if (abort) { - do_abort(instance); + if (tmp) { + dsprintk(NDEBUG_RESELECTION | NDEBUG_QUEUES, instance, + "reselect: removed %p from disconnected queue\n", tmp); } else { - hostdata->connected = tmp; - dprintk(NDEBUG_RESELECTION, "scsi%d : nexus established, target = %d, lun = %llu, tag = %d\n", instance->host_no, tmp->device->id, tmp->device->lun, tmp->tag); + shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d not in disconnected queue.\n", + target_mask, lun); + /* + * Since we have an established nexus that we can't do anything + * with, we must abort it. + */ + do_abort(instance); + return; } + + /* Accept message by clearing ACK */ + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); + + hostdata->connected = tmp; + dsprintk(NDEBUG_RESELECTION, instance, "nexus established, target %d, lun %llu, tag %d\n", + scmd_id(tmp), tmp->device->lun, tmp->tag); } /* * Function : void NCR5380_dma_complete (struct Scsi_Host *instance) * * Purpose : called by interrupt handler when DMA finishes or a phase - * mismatch occurs (which would finish the DMA transfer). + * mismatch occurs (which would finish the DMA transfer). * * Inputs : instance - this instance of the NCR5380. * * Returns : pointer to the scsi_cmnd structure for which the I_T_L - * nexus has been reestablished, on failure NULL is returned. + * nexus has been reestablished, on failure NULL is returned. */ #ifdef REAL_DMA static void NCR5380_dma_complete(NCR5380_instance * instance) { - NCR5380_local_declare(); - struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; + struct NCR5380_hostdata *hostdata = shost_priv(instance); int transferred; - NCR5380_setup(instance); /* * XXX this might not be right. * * Wait for final byte to transfer, ie wait for ACK to go false. * - * We should use the Last Byte Sent bit, unfortunately this is + * We should use the Last Byte Sent bit, unfortunately this is * not available on the 5380/5381 (only the various CMOS chips) * * FIXME: timeout, and need to handle long timeout/irq case @@ -2543,7 +2225,6 @@ static void NCR5380_dma_complete(NCR5380_instance * instance) { NCR5380_poll_politely(instance, BUS_AND_STATUS_REG, BASR_ACK, 0, 5*HZ); - NCR5380_write(MODE_REG, MR_BASE); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); /* @@ -2560,190 +2241,251 @@ static void NCR5380_dma_complete(NCR5380_instance * instance) { } #endif /* def REAL_DMA */ -/* - * Function : int NCR5380_abort (struct scsi_cmnd *cmd) - * - * Purpose : abort a command - * - * Inputs : cmd - the scsi_cmnd to abort, code - code to set the - * host byte of the result field to, if zero DID_ABORTED is - * used. - * - * Returns : SUCCESS - success, FAILED on failure. - * - * XXX - there is no way to abort the command that is currently - * connected, you have to wait for it to complete. If this is - * a problem, we could implement longjmp() / setjmp(), setjmp() - * called where the loop started in NCR5380_main(). - * - * Locks: host lock taken by caller +/** + * list_find_cmd - test for presence of a command in a linked list + * @haystack: list of commands + * @needle: command to search for */ -static int NCR5380_abort(struct scsi_cmnd *cmd) +static bool list_find_cmd(struct list_head *haystack, + struct scsi_cmnd *needle) { - NCR5380_local_declare(); - struct Scsi_Host *instance = cmd->device->host; - struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; - struct scsi_cmnd *tmp, **prev; + struct NCR5380_cmd *ncmd; - scmd_printk(KERN_WARNING, cmd, "aborting command\n"); + list_for_each_entry(ncmd, haystack, list) + if (NCR5380_to_scmd(ncmd) == needle) + return true; + return false; +} - NCR5380_print_status(instance); +/** + * list_remove_cmd - remove a command from linked list + * @haystack: list of commands + * @needle: command to remove + */ - NCR5380_setup(instance); +static bool list_del_cmd(struct list_head *haystack, + struct scsi_cmnd *needle) +{ + if (list_find_cmd(haystack, needle)) { + struct NCR5380_cmd *ncmd = scsi_cmd_priv(needle); - dprintk(NDEBUG_ABORT, "scsi%d : abort called\n", instance->host_no); - dprintk(NDEBUG_ABORT, " basr 0x%X, sr 0x%X\n", NCR5380_read(BUS_AND_STATUS_REG), NCR5380_read(STATUS_REG)); + list_del(&ncmd->list); + return true; + } + return false; +} -#if 0 -/* - * Case 1 : If the command is the currently executing command, - * we'll set the aborted flag and return control so that - * information transfer routine can exit cleanly. +/** + * NCR5380_abort - scsi host eh_abort_handler() method + * @cmd: the command to be aborted + * + * Try to abort a given command by removing it from queues and/or sending + * the target an abort message. This may not succeed in causing a target + * to abort the command. Nonetheless, the low-level driver must forget about + * the command because the mid-layer reclaims it and it may be re-issued. + * + * The normal path taken by a command is as follows. For EH we trace this + * same path to locate and abort the command. + * + * unissued -> selecting -> [unissued -> selecting ->]... connected -> + * [disconnected -> connected ->]... + * [autosense -> connected ->] done + * + * If cmd is unissued then just remove it. + * If cmd is disconnected, try to select the target. + * If cmd is connected, try to send an abort message. + * If cmd is waiting for autosense, give it a chance to complete but check + * that it isn't left connected. + * If cmd was not found at all then presumably it has already been completed, + * in which case return SUCCESS to try to avoid further EH measures. + * If the command has not completed yet, we must not fail to find it. */ - if (hostdata->connected == cmd) { - dprintk(NDEBUG_ABORT, "scsi%d : aborting connected command\n", instance->host_no); - hostdata->aborted = 1; -/* - * We should perform BSY checking, and make sure we haven't slipped - * into BUS FREE. - */ +static int NCR5380_abort(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *instance = cmd->device->host; + struct NCR5380_hostdata *hostdata = shost_priv(instance); + unsigned long flags; + int result = SUCCESS; - NCR5380_write(INITIATOR_COMMAND_REG, ICR_ASSERT_ATN); -/* - * Since we can't change phases until we've completed the current - * handshake, we have to source or sink a byte of data if the current - * phase is not MSGOUT. - */ + spin_lock_irqsave(&hostdata->lock, flags); -/* - * Return control to the executing NCR drive so we can clear the - * aborted flag and get back into our main loop. - */ +#if (NDEBUG & NDEBUG_ANY) + scmd_printk(KERN_INFO, cmd, __func__); +#endif + NCR5380_dprint(NDEBUG_ANY, instance); + NCR5380_dprint_phase(NDEBUG_ANY, instance); - return SUCCESS; + if (list_del_cmd(&hostdata->unissued, cmd)) { + dsprintk(NDEBUG_ABORT, instance, + "abort: removed %p from issue queue\n", cmd); + cmd->result = DID_ABORT << 16; + cmd->scsi_done(cmd); /* No tag or busy flag to worry about */ } -#endif -/* - * Case 2 : If the command hasn't been issued yet, we simply remove it - * from the issue queue. - */ - - dprintk(NDEBUG_ABORT, "scsi%d : abort going into loop.\n", instance->host_no); - for (prev = (struct scsi_cmnd **) &(hostdata->issue_queue), tmp = (struct scsi_cmnd *) hostdata->issue_queue; tmp; prev = (struct scsi_cmnd **) &(tmp->host_scribble), tmp = (struct scsi_cmnd *) tmp->host_scribble) - if (cmd == tmp) { - REMOVE(5, *prev, tmp, tmp->host_scribble); - (*prev) = (struct scsi_cmnd *) tmp->host_scribble; - tmp->host_scribble = NULL; - tmp->result = DID_ABORT << 16; - dprintk(NDEBUG_ABORT, "scsi%d : abort removed command from issue queue.\n", instance->host_no); - tmp->scsi_done(tmp); - return SUCCESS; + if (hostdata->selecting == cmd) { + dsprintk(NDEBUG_ABORT, instance, + "abort: cmd %p == selecting\n", cmd); + hostdata->selecting = NULL; + cmd->result = DID_ABORT << 16; + complete_cmd(instance, cmd); + goto out; + } + + if (list_del_cmd(&hostdata->disconnected, cmd)) { + dsprintk(NDEBUG_ABORT, instance, + "abort: removed %p from disconnected list\n", cmd); + cmd->result = DID_ERROR << 16; + if (!hostdata->connected) + NCR5380_select(instance, cmd); + if (hostdata->connected != cmd) { + complete_cmd(instance, cmd); + result = FAILED; + goto out; + } + } + + if (hostdata->connected == cmd) { + dsprintk(NDEBUG_ABORT, instance, "abort: cmd %p is connected\n", cmd); + hostdata->connected = NULL; + if (do_abort(instance)) { + set_host_byte(cmd, DID_ERROR); + complete_cmd(instance, cmd); + result = FAILED; + goto out; } -#if (NDEBUG & NDEBUG_ABORT) - /* KLL */ - else if (prev == tmp) - printk(KERN_ERR "scsi%d : LOOP\n", instance->host_no); + set_host_byte(cmd, DID_ABORT); +#ifdef REAL_DMA + hostdata->dma_len = 0; #endif + if (cmd->cmnd[0] == REQUEST_SENSE) + complete_cmd(instance, cmd); + else { + struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd); -/* - * Case 3 : If any commands are connected, we're going to fail the abort - * and let the high level SCSI driver retry at a later time or - * issue a reset. - * - * Timeouts, and therefore aborted commands, will be highly unlikely - * and handling them cleanly in this situation would make the common - * case of noresets less efficient, and would pollute our code. So, - * we fail. - */ + /* Perform autosense for this command */ + list_add(&ncmd->list, &hostdata->autosense); + } + } - if (hostdata->connected) { - dprintk(NDEBUG_ABORT, "scsi%d : abort failed, command connected.\n", instance->host_no); - return FAILED; + if (list_find_cmd(&hostdata->autosense, cmd)) { + dsprintk(NDEBUG_ABORT, instance, + "abort: found %p on sense queue\n", cmd); + spin_unlock_irqrestore(&hostdata->lock, flags); + queue_work(hostdata->work_q, &hostdata->main_task); + msleep(1000); + spin_lock_irqsave(&hostdata->lock, flags); + if (list_del_cmd(&hostdata->autosense, cmd)) { + dsprintk(NDEBUG_ABORT, instance, + "abort: removed %p from sense queue\n", cmd); + set_host_byte(cmd, DID_ABORT); + complete_cmd(instance, cmd); + goto out; + } } -/* - * Case 4: If the command is currently disconnected from the bus, and - * there are no connected commands, we reconnect the I_T_L or - * I_T_L_Q nexus associated with it, go into message out, and send - * an abort message. - * - * This case is especially ugly. In order to reestablish the nexus, we - * need to call NCR5380_select(). The easiest way to implement this - * function was to abort if the bus was busy, and let the interrupt - * handler triggered on the SEL for reselect take care of lost arbitrations - * where necessary, meaning interrupts need to be enabled. - * - * When interrupts are enabled, the queues may change - so we - * can't remove it from the disconnected queue before selecting it - * because that could cause a failure in hashing the nexus if that - * device reselected. - * - * Since the queues may change, we can't use the pointers from when we - * first locate it. - * - * So, we must first locate the command, and if NCR5380_select() - * succeeds, then issue the abort, relocate the command and remove - * it from the disconnected queue. - */ - for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp; tmp = (struct scsi_cmnd *) tmp->host_scribble) - if (cmd == tmp) { - dprintk(NDEBUG_ABORT, "scsi%d : aborting disconnected command.\n", instance->host_no); + if (hostdata->connected == cmd) { + dsprintk(NDEBUG_ABORT, instance, "abort: cmd %p is connected\n", cmd); + hostdata->connected = NULL; + if (do_abort(instance)) { + set_host_byte(cmd, DID_ERROR); + complete_cmd(instance, cmd); + result = FAILED; + goto out; + } + set_host_byte(cmd, DID_ABORT); +#ifdef REAL_DMA + hostdata->dma_len = 0; +#endif + complete_cmd(instance, cmd); + } - if (NCR5380_select(instance, cmd)) - return FAILED; - dprintk(NDEBUG_ABORT, "scsi%d : nexus reestablished.\n", instance->host_no); +out: + if (result == FAILED) + dsprintk(NDEBUG_ABORT, instance, "abort: failed to abort %p\n", cmd); + else + dsprintk(NDEBUG_ABORT, instance, "abort: successfully aborted %p\n", cmd); - do_abort(instance); + queue_work(hostdata->work_q, &hostdata->main_task); + spin_unlock_irqrestore(&hostdata->lock, flags); - for (prev = (struct scsi_cmnd **) &(hostdata->disconnected_queue), tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp; prev = (struct scsi_cmnd **) &(tmp->host_scribble), tmp = (struct scsi_cmnd *) tmp->host_scribble) - if (cmd == tmp) { - REMOVE(5, *prev, tmp, tmp->host_scribble); - *prev = (struct scsi_cmnd *) tmp->host_scribble; - tmp->host_scribble = NULL; - tmp->result = DID_ABORT << 16; - tmp->scsi_done(tmp); - return SUCCESS; - } - } -/* - * Case 5 : If we reached this point, the command was not found in any of - * the queues. - * - * We probably reached this point because of an unlikely race condition - * between the command completing successfully and the abortion code, - * so we won't panic, but we will notify the user in case something really - * broke. - */ - printk(KERN_WARNING "scsi%d : warning : SCSI command probably completed successfully\n" - " before abortion\n", instance->host_no); - return FAILED; + return result; } -/* - * Function : int NCR5380_bus_reset (struct scsi_cmnd *cmd) - * - * Purpose : reset the SCSI bus. - * - * Returns : SUCCESS +/** + * NCR5380_bus_reset - reset the SCSI bus + * @cmd: SCSI command undergoing EH * - * Locks: host lock taken by caller + * Returns SUCCESS */ static int NCR5380_bus_reset(struct scsi_cmnd *cmd) { struct Scsi_Host *instance = cmd->device->host; + struct NCR5380_hostdata *hostdata = shost_priv(instance); + int i; + unsigned long flags; + struct NCR5380_cmd *ncmd; - NCR5380_local_declare(); - NCR5380_setup(instance); - NCR5380_print_status(instance); + spin_lock_irqsave(&hostdata->lock, flags); + +#if (NDEBUG & NDEBUG_ANY) + scmd_printk(KERN_INFO, cmd, __func__); +#endif + NCR5380_dprint(NDEBUG_ANY, instance); + NCR5380_dprint_phase(NDEBUG_ANY, instance); - spin_lock_irq(instance->host_lock); do_reset(instance); - spin_unlock_irq(instance->host_lock); + + /* reset NCR registers */ + NCR5380_write(MODE_REG, MR_BASE); + NCR5380_write(TARGET_COMMAND_REG, 0); + NCR5380_write(SELECT_ENABLE_REG, 0); + + /* After the reset, there are no more connected or disconnected commands + * and no busy units; so clear the low-level status here to avoid + * conflicts when the mid-level code tries to wake up the affected + * commands! + */ + + hostdata->selecting = NULL; + + list_for_each_entry(ncmd, &hostdata->disconnected, list) { + struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd); + + set_host_byte(cmd, DID_RESET); + cmd->scsi_done(cmd); + } + + list_for_each_entry(ncmd, &hostdata->autosense, list) { + struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd); + + set_host_byte(cmd, DID_RESET); + cmd->scsi_done(cmd); + } + + if (hostdata->connected) { + set_host_byte(hostdata->connected, DID_RESET); + complete_cmd(instance, hostdata->connected); + hostdata->connected = NULL; + } + + if (hostdata->sensing) { + set_host_byte(hostdata->connected, DID_RESET); + complete_cmd(instance, hostdata->sensing); + hostdata->sensing = NULL; + } + + for (i = 0; i < 8; ++i) + hostdata->busy[i] = 0; +#ifdef REAL_DMA + hostdata->dma_len = 0; +#endif + + queue_work(hostdata->work_q, &hostdata->main_task); + spin_unlock_irqrestore(&hostdata->lock, flags); return SUCCESS; } diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h index 162112dd1bf8..a79288682a74 100644 --- a/drivers/scsi/NCR5380.h +++ b/drivers/scsi/NCR5380.h @@ -22,8 +22,13 @@ #ifndef NCR5380_H #define NCR5380_H +#include <linux/delay.h> #include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/workqueue.h> +#include <scsi/scsi_dbg.h> #include <scsi/scsi_eh.h> +#include <scsi/scsi_transport_spi.h> #define NDEBUG_ARBITRATION 0x1 #define NDEBUG_AUTOSENSE 0x2 @@ -158,8 +163,7 @@ /* Write any value to this register to start an ini mode DMA receive */ #define START_DMA_INITIATOR_RECEIVE_REG 7 /* wo */ -#define C400_CONTROL_STATUS_REG NCR53C400_register_offset-8 /* rw */ - +/* NCR 53C400(A) Control Status Register bits: */ #define CSR_RESET 0x80 /* wo Resets 53c400 */ #define CSR_53C80_REG 0x80 /* ro 5380 registers busy */ #define CSR_TRANS_DIR 0x40 /* rw Data transfer direction */ @@ -176,16 +180,6 @@ #define CSR_BASE CSR_53C80_INTR #endif -/* Number of 128-byte blocks to be transferred */ -#define C400_BLOCK_COUNTER_REG NCR53C400_register_offset-7 /* rw */ - -/* Resume transfer after disconnect */ -#define C400_RESUME_TRANSFER_REG NCR53C400_register_offset-6 /* wo */ - -/* Access to host buffer stack */ -#define C400_HOST_BUFFER NCR53C400_register_offset-4 /* rw */ - - /* Note : PHASE_* macros are based on the values of the STATUS register */ #define PHASE_MASK (SR_MSG | SR_CD | SR_IO) @@ -205,16 +199,6 @@ #define PHASE_SR_TO_TCR(phase) ((phase) >> 2) -/* - * The internal should_disconnect() function returns these based on the - * expected length of a disconnect if a device supports disconnect/ - * reconnect. - */ - -#define DISCONNECT_NONE 0 -#define DISCONNECT_TIME_TO_DATA 1 -#define DISCONNECT_LONG 2 - /* * "Special" value for the (unsigned char) command tag, to indicate * I_T_L nexus instead of I_T_L_Q. @@ -236,15 +220,11 @@ #define NO_IRQ 0 #endif -#define FLAG_HAS_LAST_BYTE_SENT 1 /* NCR53c81 or better */ -#define FLAG_CHECK_LAST_BYTE_SENT 2 /* Only test once */ -#define FLAG_NCR53C400 4 /* NCR53c400 */ +#define FLAG_NO_DMA_FIXUP 1 /* No DMA errata workarounds */ #define FLAG_NO_PSEUDO_DMA 8 /* Inhibit DMA */ -#define FLAG_DTC3181E 16 /* DTC3181E */ #define FLAG_LATE_DMA_SETUP 32 /* Setup NCR before DMA H/W */ #define FLAG_TAGGED_QUEUING 64 /* as X3T9.2 spelled it */ - -#ifndef ASM +#define FLAG_TOSHIBA_DELAY 128 /* Allow for borken CD-ROMs */ #ifdef SUPPORT_TAGS struct tag_alloc { @@ -258,33 +238,24 @@ struct NCR5380_hostdata { NCR5380_implementation_fields; /* implementation specific */ struct Scsi_Host *host; /* Host backpointer */ unsigned char id_mask, id_higher_mask; /* 1 << id, all bits greater */ - unsigned char targets_present; /* targets we have connected - to, so we can call a select - failure a retryable condition */ - volatile unsigned char busy[8]; /* index = target, bit = lun */ + unsigned char busy[8]; /* index = target, bit = lun */ #if defined(REAL_DMA) || defined(REAL_DMA_POLL) - volatile int dma_len; /* requested length of DMA */ + int dma_len; /* requested length of DMA */ #endif - volatile unsigned char last_message; /* last message OUT */ - volatile struct scsi_cmnd *connected; /* currently connected command */ - volatile struct scsi_cmnd *issue_queue; /* waiting to be issued */ - volatile struct scsi_cmnd *disconnected_queue; /* waiting for reconnect */ - volatile int restart_select; /* we have disconnected, - used to restart - NCR5380_select() */ - volatile unsigned aborted:1; /* flag, says aborted */ + unsigned char last_message; /* last message OUT */ + struct scsi_cmnd *connected; /* currently connected cmnd */ + struct scsi_cmnd *selecting; /* cmnd to be connected */ + struct list_head unissued; /* waiting to be issued */ + struct list_head autosense; /* priority issue queue */ + struct list_head disconnected; /* waiting for reconnect */ + spinlock_t lock; /* protects this struct */ int flags; - unsigned long time_expires; /* in jiffies, set prior to sleeping */ - int select_time; /* timer in select for target response */ - volatile struct scsi_cmnd *selecting; - struct delayed_work coroutine; /* our co-routine */ struct scsi_eh_save ses; + struct scsi_cmnd *sensing; char info[256]; int read_overruns; /* number of bytes to cut from a * transfer to handle chip overruns */ - int retain_dma_intr; struct work_struct main_task; - volatile int main_running; #ifdef SUPPORT_TAGS struct tag_alloc TagAlloc[8][8]; /* 8 targets and 8 LUNs */ #endif @@ -292,10 +263,23 @@ struct NCR5380_hostdata { unsigned spin_max_r; unsigned spin_max_w; #endif + struct workqueue_struct *work_q; + unsigned long accesses_per_ms; /* chip register accesses per ms */ }; #ifdef __KERNEL__ +struct NCR5380_cmd { + struct list_head list; +}; + +#define NCR5380_CMD_SIZE (sizeof(struct NCR5380_cmd)) + +static inline struct scsi_cmnd *NCR5380_to_scmd(struct NCR5380_cmd *ncmd_ptr) +{ + return ((struct scsi_cmnd *)ncmd_ptr) - 1; +} + #ifndef NDEBUG #define NDEBUG (0) #endif @@ -304,6 +288,11 @@ struct NCR5380_hostdata { do { if ((NDEBUG) & (flg)) \ printk(KERN_DEBUG fmt, ## __VA_ARGS__); } while (0) +#define dsprintk(flg, host, fmt, ...) \ + do { if ((NDEBUG) & (flg)) \ + shost_printk(KERN_DEBUG, host, fmt, ## __VA_ARGS__); \ + } while (0) + #if NDEBUG #define NCR5380_dprint(flg, arg) \ do { if ((NDEBUG) & (flg)) NCR5380_print(arg); } while (0) @@ -320,6 +309,7 @@ static void NCR5380_print(struct Scsi_Host *instance); static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible); #endif static int NCR5380_init(struct Scsi_Host *instance, int flags); +static int NCR5380_maybe_reset_bus(struct Scsi_Host *); static void NCR5380_exit(struct Scsi_Host *instance); static void NCR5380_information_transfer(struct Scsi_Host *instance); #ifndef DONT_USE_INTR @@ -328,7 +318,7 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id); static void NCR5380_main(struct work_struct *work); static const char *NCR5380_info(struct Scsi_Host *instance); static void NCR5380_reselect(struct Scsi_Host *instance); -static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd); +static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *, struct scsi_cmnd *); #if defined(PSEUDO_DMA) || defined(REAL_DMA) || defined(REAL_DMA_POLL) static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data); #endif @@ -443,5 +433,4 @@ static __inline__ int NCR5380_pc_dma_residual(struct Scsi_Host *instance) #endif /* defined(i386) || defined(__alpha__) */ #endif /* defined(REAL_DMA) */ #endif /* __KERNEL__ */ -#endif /* ndef ASM */ #endif /* NCR5380_H */ diff --git a/drivers/scsi/arm/cumana_1.c b/drivers/scsi/arm/cumana_1.c index d28d6c0f18c0..221f18c5df93 100644 --- a/drivers/scsi/arm/cumana_1.c +++ b/drivers/scsi/arm/cumana_1.c @@ -4,9 +4,7 @@ * Copyright 1995-2002, Russell King */ #include <linux/module.h> -#include <linux/signal.h> #include <linux/ioport.h> -#include <linux/delay.h> #include <linux/blkdev.h> #include <linux/init.h> @@ -15,15 +13,14 @@ #include <scsi/scsi_host.h> -#include <scsi/scsicam.h> - #define PSEUDO_DMA #define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata) -#define NCR5380_local_declare() struct Scsi_Host *_instance -#define NCR5380_setup(instance) _instance = instance -#define NCR5380_read(reg) cumanascsi_read(_instance, reg) -#define NCR5380_write(reg, value) cumanascsi_write(_instance, reg, value) +#define NCR5380_read(reg) cumanascsi_read(instance, reg) +#define NCR5380_write(reg, value) cumanascsi_write(instance, reg, value) + +#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize) + #define NCR5380_intr cumanascsi_intr #define NCR5380_queue_command cumanascsi_queue_command #define NCR5380_info cumanascsi_info @@ -211,6 +208,8 @@ static struct scsi_host_template cumanascsi_template = { .cmd_per_lun = 2, .use_clustering = DISABLE_CLUSTERING, .proc_name = "CumanaSCSI-1", + .cmd_size = NCR5380_CMD_SIZE, + .max_sectors = 128, }; static int cumanascsi1_probe(struct expansion_card *ec, @@ -240,23 +239,21 @@ static int cumanascsi1_probe(struct expansion_card *ec, host->irq = ec->irq; - NCR5380_init(host, 0); + ret = NCR5380_init(host, 0); + if (ret) + goto out_unmap; + + NCR5380_maybe_reset_bus(host); priv(host)->ctrl = 0; writeb(0, priv(host)->base + CTRL); - host->n_io_port = 255; - if (!(request_region(host->io_port, host->n_io_port, "CumanaSCSI-1"))) { - ret = -EBUSY; - goto out_unmap; - } - ret = request_irq(host->irq, cumanascsi_intr, 0, "CumanaSCSI-1", host); if (ret) { printk("scsi%d: IRQ%d not free: %d\n", host->host_no, host->irq, ret); - goto out_unmap; + goto out_exit; } ret = scsi_add_host(host, &ec->dev); @@ -268,6 +265,8 @@ static int cumanascsi1_probe(struct expansion_card *ec, out_free_irq: free_irq(host->irq, host); + out_exit: + NCR5380_exit(host); out_unmap: iounmap(priv(host)->base); iounmap(priv(host)->dma); diff --git a/drivers/scsi/arm/oak.c b/drivers/scsi/arm/oak.c index 7c6fa1479c9c..1fab1d1896b1 100644 --- a/drivers/scsi/arm/oak.c +++ b/drivers/scsi/arm/oak.c @@ -5,9 +5,7 @@ */ #include <linux/module.h> -#include <linux/signal.h> #include <linux/ioport.h> -#include <linux/delay.h> #include <linux/blkdev.h> #include <linux/init.h> @@ -20,14 +18,16 @@ #define DONT_USE_INTR #define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata) -#define NCR5380_local_declare() void __iomem *_base -#define NCR5380_setup(host) _base = priv(host)->base -#define NCR5380_read(reg) readb(_base + ((reg) << 2)) -#define NCR5380_write(reg, value) writeb(value, _base + ((reg) << 2)) +#define NCR5380_read(reg) \ + readb(priv(instance)->base + ((reg) << 2)) +#define NCR5380_write(reg, value) \ + writeb(value, priv(instance)->base + ((reg) << 2)) + +#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize) + #define NCR5380_queue_command oakscsi_queue_command #define NCR5380_info oakscsi_info -#define NCR5380_show_info oakscsi_show_info #define NCR5380_implementation_fields \ void __iomem *base @@ -103,7 +103,6 @@ printk("reading %p len %d\n", addr, len); static struct scsi_host_template oakscsi_template = { .module = THIS_MODULE, - .show_info = oakscsi_show_info, .name = "Oak 16-bit SCSI", .info = oakscsi_info, .queuecommand = oakscsi_queue_command, @@ -115,6 +114,8 @@ static struct scsi_host_template oakscsi_template = { .cmd_per_lun = 2, .use_clustering = DISABLE_CLUSTERING, .proc_name = "oakscsi", + .cmd_size = NCR5380_CMD_SIZE, + .max_sectors = 128, }; static int oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id) @@ -142,15 +143,21 @@ static int oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id) host->irq = NO_IRQ; host->n_io_port = 255; - NCR5380_init(host, 0); + ret = NCR5380_init(host, 0); + if (ret) + goto out_unmap; + + NCR5380_maybe_reset_bus(host); ret = scsi_add_host(host, &ec->dev); if (ret) - goto out_unmap; + goto out_exit; scsi_scan_host(host); goto out; + out_exit: + NCR5380_exit(host); out_unmap: iounmap(priv(host)->base); unreg: diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c index db87ece6edb2..e65478651ca9 100644 --- a/drivers/scsi/atari_NCR5380.c +++ b/drivers/scsi/atari_NCR5380.c @@ -1,15 +1,15 @@ /* * NCR 5380 generic driver routines. These should make it *trivial* - * to implement 5380 SCSI drivers under Linux with a non-trantor - * architecture. + * to implement 5380 SCSI drivers under Linux with a non-trantor + * architecture. * - * Note that these routines also work with NR53c400 family chips. + * Note that these routines also work with NR53c400 family chips. * * Copyright 1993, Drew Eckhardt - * Visionary Computing - * (Unix and Linux consulting and custom programming) - * drew@colorado.edu - * +1 (303) 666-5836 + * Visionary Computing + * (Unix and Linux consulting and custom programming) + * drew@colorado.edu + * +1 (303) 666-5836 * * For more information, please consult * @@ -24,84 +24,10 @@ * 1+ (800) 334-5454 */ -/* - * ++roman: To port the 5380 driver to the Atari, I had to do some changes in - * this file, too: - * - * - Some of the debug statements were incorrect (undefined variables and the - * like). I fixed that. - * - * - In information_transfer(), I think a #ifdef was wrong. Looking at the - * possible DMA transfer size should also happen for REAL_DMA. I added this - * in the #if statement. - * - * - When using real DMA, information_transfer() should return in a DATAOUT - * phase after starting the DMA. It has nothing more to do. - * - * - The interrupt service routine should run main after end of DMA, too (not - * only after RESELECTION interrupts). Additionally, it should _not_ test - * for more interrupts after running main, since a DMA process may have - * been started and interrupts are turned on now. The new int could happen - * inside the execution of NCR5380_intr(), leading to recursive - * calls. - * - * - I've added a function merge_contiguous_buffers() that tries to - * merge scatter-gather buffers that are located at contiguous - * physical addresses and can be processed with the same DMA setup. - * Since most scatter-gather operations work on a page (4K) of - * 4 buffers (1K), in more than 90% of all cases three interrupts and - * DMA setup actions are saved. - * - * - I've deleted all the stuff for AUTOPROBE_IRQ, REAL_DMA_POLL, PSEUDO_DMA - * and USLEEP, because these were messing up readability and will never be - * needed for Atari SCSI. - * - * - I've revised the NCR5380_main() calling scheme (relax the 'main_running' - * stuff), and 'main' is executed in a bottom half if awoken by an - * interrupt. - * - * - The code was quite cluttered up by "#if (NDEBUG & NDEBUG_*) printk..." - * constructs. In my eyes, this made the source rather unreadable, so I - * finally replaced that by the *_PRINTK() macros. - * - */ - -/* - * Further development / testing that should be done : - * 1. Test linked command handling code after Eric is ready with - * the high level code. - */ +/* Ported to Atari by Roman Hodek and others. */ /* Adapted for the sun3 by Sam Creasey. */ -#include <scsi/scsi_dbg.h> -#include <scsi/scsi_transport_spi.h> - -#if (NDEBUG & NDEBUG_LISTS) -#define LIST(x, y) \ - do { \ - printk("LINE:%d Adding %p to %p\n", \ - __LINE__, (void*)(x), (void*)(y)); \ - if ((x) == (y)) \ - udelay(5); \ - } while (0) -#define REMOVE(w, x, y, z) \ - do { \ - printk("LINE:%d Removing: %p->%p %p->%p \n", \ - __LINE__, (void*)(w), (void*)(x), \ - (void*)(y), (void*)(z)); \ - if ((x) == (y)) \ - udelay(5); \ - } while (0) -#else -#define LIST(x,y) -#define REMOVE(w,x,y,z) -#endif - -#ifndef notyet -#undef LINKED -#endif - /* * Design * @@ -126,17 +52,7 @@ * piece of hardware that requires you to sit in a loop polling for * the REQ signal as long as you are connected. Some devices are * brain dead (ie, many TEXEL CD ROM drives) and won't disconnect - * while doing long seek operations. - * - * The workaround for this is to keep track of devices that have - * disconnected. If the device hasn't disconnected, for commands that - * should disconnect, we do something like - * - * while (!REQ is asserted) { sleep for N usecs; poll for M usecs } - * - * Some tweaking of N and M needs to be done. An algorithm based - * on "time to data" would give the best results as long as short time - * to datas (ie, on the same track) were considered, however these + * while doing long seek operations. [...] These * broken devices are the exception rather than the rule and I'd rather * spend my time optimizing for the normal case. * @@ -177,12 +93,10 @@ * * These macros control options : * AUTOSENSE - if defined, REQUEST SENSE will be performed automatically - * for commands that return with a CHECK CONDITION status. + * for commands that return with a CHECK CONDITION status. * * DIFFERENTIAL - if defined, NCR53c81 chips will use external differential - * transceivers. - * - * LINKED - if defined, linked commands are supported. + * transceivers. * * REAL_DMA - if defined, REAL DMA is used during the data transfer phases. * @@ -195,17 +109,17 @@ * NCR5380_write(register, value) - write to the specific register * * NCR5380_implementation_fields - additional fields needed for this - * specific implementation of the NCR5380 + * specific implementation of the NCR5380 * * Either real DMA *or* pseudo DMA may be implemented * REAL functions : * NCR5380_REAL_DMA should be defined if real DMA is to be used. * Note that the DMA setup functions should return the number of bytes - * that they were able to program the controller for. + * that they were able to program the controller for. * * Also note that generic i386/PC versions of these macros are - * available as NCR5380_i386_dma_write_setup, - * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual. + * available as NCR5380_i386_dma_write_setup, + * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual. * * NCR5380_dma_write_setup(instance, src, count) - initialize * NCR5380_dma_read_setup(instance, dst, count) - initialize @@ -221,18 +135,8 @@ * possible) function may be used. */ -/* Macros ease life... :-) */ -#define SETUP_HOSTDATA(in) \ - struct NCR5380_hostdata *hostdata = \ - (struct NCR5380_hostdata *)(in)->hostdata -#define HOSTDATA(in) ((struct NCR5380_hostdata *)(in)->hostdata) - -#define NEXT(cmd) ((struct scsi_cmnd *)(cmd)->host_scribble) -#define SET_NEXT(cmd,next) ((cmd)->host_scribble = (void *)(next)) -#define NEXTADDR(cmd) ((struct scsi_cmnd **)&(cmd)->host_scribble) - -#define HOSTNO instance->host_no -#define H_NO(cmd) (cmd)->device->host->host_no +static int do_abort(struct Scsi_Host *); +static void do_reset(struct Scsi_Host *); #ifdef SUPPORT_TAGS @@ -251,9 +155,7 @@ * cannot know it in advance :-( We just see a QUEUE_FULL status being * returned. So, in this case, the driver internal queue size assumption is * reduced to the number of active tags if QUEUE_FULL is returned by the - * target. The command is returned to the mid-level, but with status changed - * to BUSY, since --as I've seen-- the mid-level can't handle QUEUE_FULL - * correctly. + * target. * * We're also not allowed running tagged commands as long as an untagged * command is active. And REQUEST SENSE commands after a contingent allegiance @@ -304,7 +206,8 @@ static void __init init_tags(struct NCR5380_hostdata *hostdata) static int is_lun_busy(struct scsi_cmnd *cmd, int should_be_tagged) { u8 lun = cmd->device->lun; - SETUP_HOSTDATA(cmd->device->host); + struct Scsi_Host *instance = cmd->device->host; + struct NCR5380_hostdata *hostdata = shost_priv(instance); if (hostdata->busy[cmd->device->id] & (1 << lun)) return 1; @@ -314,8 +217,8 @@ static int is_lun_busy(struct scsi_cmnd *cmd, int should_be_tagged) return 0; if (hostdata->TagAlloc[scmd_id(cmd)][lun].nr_allocated >= hostdata->TagAlloc[scmd_id(cmd)][lun].queue_size) { - dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d: no free tags\n", - H_NO(cmd), cmd->device->id, lun); + dsprintk(NDEBUG_TAGS, instance, "target %d lun %d: no free tags\n", + scmd_id(cmd), lun); return 1; } return 0; @@ -330,7 +233,8 @@ static int is_lun_busy(struct scsi_cmnd *cmd, int should_be_tagged) static void cmd_get_tag(struct scsi_cmnd *cmd, int should_be_tagged) { u8 lun = cmd->device->lun; - SETUP_HOSTDATA(cmd->device->host); + struct Scsi_Host *instance = cmd->device->host; + struct NCR5380_hostdata *hostdata = shost_priv(instance); /* If we or the target don't support tagged queuing, allocate the LUN for * an untagged command. @@ -340,18 +244,16 @@ static void cmd_get_tag(struct scsi_cmnd *cmd, int should_be_tagged) !cmd->device->tagged_supported) { cmd->tag = TAG_NONE; hostdata->busy[cmd->device->id] |= (1 << lun); - dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d now allocated by untagged " - "command\n", H_NO(cmd), cmd->device->id, lun); + dsprintk(NDEBUG_TAGS, instance, "target %d lun %d now allocated by untagged command\n", + scmd_id(cmd), lun); } else { struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][lun]; cmd->tag = find_first_zero_bit(ta->allocated, MAX_TAGS); set_bit(cmd->tag, ta->allocated); ta->nr_allocated++; - dprintk(NDEBUG_TAGS, "scsi%d: using tag %d for target %d lun %d " - "(now %d tags in use)\n", - H_NO(cmd), cmd->tag, cmd->device->id, - lun, ta->nr_allocated); + dsprintk(NDEBUG_TAGS, instance, "using tag %d for target %d lun %d (%d tags allocated)\n", + cmd->tag, scmd_id(cmd), lun, ta->nr_allocated); } } @@ -363,21 +265,22 @@ static void cmd_get_tag(struct scsi_cmnd *cmd, int should_be_tagged) static void cmd_free_tag(struct scsi_cmnd *cmd) { u8 lun = cmd->device->lun; - SETUP_HOSTDATA(cmd->device->host); + struct Scsi_Host *instance = cmd->device->host; + struct NCR5380_hostdata *hostdata = shost_priv(instance); if (cmd->tag == TAG_NONE) { hostdata->busy[cmd->device->id] &= ~(1 << lun); - dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d untagged cmd finished\n", - H_NO(cmd), cmd->device->id, lun); + dsprintk(NDEBUG_TAGS, instance, "target %d lun %d untagged cmd freed\n", + scmd_id(cmd), lun); } else if (cmd->tag >= MAX_TAGS) { - printk(KERN_NOTICE "scsi%d: trying to free bad tag %d!\n", - H_NO(cmd), cmd->tag); + shost_printk(KERN_NOTICE, instance, + "trying to free bad tag %d!\n", cmd->tag); } else { struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][lun]; clear_bit(cmd->tag, ta->allocated); ta->nr_allocated--; - dprintk(NDEBUG_TAGS, "scsi%d: freed tag %d for target %d lun %d\n", - H_NO(cmd), cmd->tag, cmd->device->id, lun); + dsprintk(NDEBUG_TAGS, instance, "freed tag %d for target %d lun %d\n", + cmd->tag, scmd_id(cmd), lun); } } @@ -401,17 +304,15 @@ static void free_all_tags(struct NCR5380_hostdata *hostdata) #endif /* SUPPORT_TAGS */ - -/* - * Function: void merge_contiguous_buffers( struct scsi_cmnd *cmd ) - * - * Purpose: Try to merge several scatter-gather requests into one DMA - * transfer. This is possible if the scatter buffers lie on - * physical contiguous addresses. - * - * Parameters: struct scsi_cmnd *cmd - * The command to work on. The first scatter buffer's data are - * assumed to be already transferred into ptr/this_residual. +/** + * merge_contiguous_buffers - coalesce scatter-gather list entries + * @cmd: command requesting IO + * + * Try to merge several scatter-gather buffers into one DMA transfer. + * This is possible if the scatter buffers lie on physically + * contiguous addresses. The first scatter-gather buffer's data are + * assumed to be already transferred into cmd->SCp.this_residual. + * Every buffer merged avoids an interrupt and a DMA setup operation. */ static void merge_contiguous_buffers(struct scsi_cmnd *cmd) @@ -463,9 +364,7 @@ static inline void initialize_SCp(struct scsi_cmnd *cmd) cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1; cmd->SCp.ptr = sg_virt(cmd->SCp.buffer); cmd->SCp.this_residual = cmd->SCp.buffer->length; - /* ++roman: Try to merge some scatter-buffers if they are at - * contiguous physical addresses. - */ + merge_contiguous_buffers(cmd); } else { cmd->SCp.buffer = NULL; @@ -473,31 +372,110 @@ static inline void initialize_SCp(struct scsi_cmnd *cmd) cmd->SCp.ptr = NULL; cmd->SCp.this_residual = 0; } + + cmd->SCp.Status = 0; + cmd->SCp.Message = 0; +} + +/** + * NCR5380_poll_politely2 - wait for two chip register values + * @instance: controller to poll + * @reg1: 5380 register to poll + * @bit1: Bitmask to check + * @val1: Expected value + * @reg2: Second 5380 register to poll + * @bit2: Second bitmask to check + * @val2: Second expected value + * @wait: Time-out in jiffies + * + * Polls the chip in a reasonably efficient manner waiting for an + * event to occur. After a short quick poll we begin to yield the CPU + * (if possible). In irq contexts the time-out is arbitrarily limited. + * Callers may hold locks as long as they are held in irq mode. + * + * Returns 0 if either or both event(s) occurred otherwise -ETIMEDOUT. + */ + +static int NCR5380_poll_politely2(struct Scsi_Host *instance, + int reg1, int bit1, int val1, + int reg2, int bit2, int val2, int wait) +{ + struct NCR5380_hostdata *hostdata = shost_priv(instance); + unsigned long deadline = jiffies + wait; + unsigned long n; + + /* Busy-wait for up to 10 ms */ + n = min(10000U, jiffies_to_usecs(wait)); + n *= hostdata->accesses_per_ms; + n /= 2000; + do { + if ((NCR5380_read(reg1) & bit1) == val1) + return 0; + if ((NCR5380_read(reg2) & bit2) == val2) + return 0; + cpu_relax(); + } while (n--); + + if (irqs_disabled() || in_interrupt()) + return -ETIMEDOUT; + + /* Repeatedly sleep for 1 ms until deadline */ + while (time_is_after_jiffies(deadline)) { + schedule_timeout_uninterruptible(1); + if ((NCR5380_read(reg1) & bit1) == val1) + return 0; + if ((NCR5380_read(reg2) & bit2) == val2) + return 0; + } + + return -ETIMEDOUT; } -#include <linux/delay.h> +static inline int NCR5380_poll_politely(struct Scsi_Host *instance, + int reg, int bit, int val, int wait) +{ + return NCR5380_poll_politely2(instance, reg, bit, val, + reg, bit, val, wait); +} #if NDEBUG static struct { unsigned char mask; const char *name; } signals[] = { - { SR_DBP, "PARITY"}, { SR_RST, "RST" }, { SR_BSY, "BSY" }, - { SR_REQ, "REQ" }, { SR_MSG, "MSG" }, { SR_CD, "CD" }, { SR_IO, "IO" }, - { SR_SEL, "SEL" }, {0, NULL} -}, basrs[] = { - {BASR_ATN, "ATN"}, {BASR_ACK, "ACK"}, {0, NULL} -}, icrs[] = { - {ICR_ASSERT_RST, "ASSERT RST"},{ICR_ASSERT_ACK, "ASSERT ACK"}, - {ICR_ASSERT_BSY, "ASSERT BSY"}, {ICR_ASSERT_SEL, "ASSERT SEL"}, - {ICR_ASSERT_ATN, "ASSERT ATN"}, {ICR_ASSERT_DATA, "ASSERT DATA"}, + {SR_DBP, "PARITY"}, + {SR_RST, "RST"}, + {SR_BSY, "BSY"}, + {SR_REQ, "REQ"}, + {SR_MSG, "MSG"}, + {SR_CD, "CD"}, + {SR_IO, "IO"}, + {SR_SEL, "SEL"}, + {0, NULL} +}, +basrs[] = { + {BASR_ATN, "ATN"}, + {BASR_ACK, "ACK"}, {0, NULL} -}, mrs[] = { - {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"}, {MR_TARGET, "MODE TARGET"}, - {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"}, {MR_ENABLE_PAR_INTR, - "MODE PARITY INTR"}, {MR_ENABLE_EOP_INTR,"MODE EOP INTR"}, +}, +icrs[] = { + {ICR_ASSERT_RST, "ASSERT RST"}, + {ICR_ASSERT_ACK, "ASSERT ACK"}, + {ICR_ASSERT_BSY, "ASSERT BSY"}, + {ICR_ASSERT_SEL, "ASSERT SEL"}, + {ICR_ASSERT_ATN, "ASSERT ATN"}, + {ICR_ASSERT_DATA, "ASSERT DATA"}, + {0, NULL} +}, +mrs[] = { + {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"}, + {MR_TARGET, "MODE TARGET"}, + {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"}, + {MR_ENABLE_PAR_INTR, "MODE PARITY INTR"}, + {MR_ENABLE_EOP_INTR, "MODE EOP INTR"}, {MR_MONITOR_BSY, "MODE MONITOR BSY"}, - {MR_DMA_MODE, "MODE DMA"}, {MR_ARBITRATE, "MODE ARBITRATION"}, + {MR_DMA_MODE, "MODE DMA"}, + {MR_ARBITRATE, "MODE ARBITRATION"}, {0, NULL} }; @@ -511,15 +489,13 @@ static struct { static void NCR5380_print(struct Scsi_Host *instance) { unsigned char status, data, basr, mr, icr, i; - unsigned long flags; - local_irq_save(flags); data = NCR5380_read(CURRENT_SCSI_DATA_REG); status = NCR5380_read(STATUS_REG); mr = NCR5380_read(MODE_REG); icr = NCR5380_read(INITIATOR_COMMAND_REG); basr = NCR5380_read(BUS_AND_STATUS_REG); - local_irq_restore(flags); + printk("STATUS_REG: %02x ", status); for (i = 0; signals[i].mask; ++i) if (status & signals[i].mask) @@ -543,8 +519,12 @@ static struct { unsigned char value; const char *name; } phases[] = { - {PHASE_DATAOUT, "DATAOUT"}, {PHASE_DATAIN, "DATAIN"}, {PHASE_CMDOUT, "CMDOUT"}, - {PHASE_STATIN, "STATIN"}, {PHASE_MSGOUT, "MSGOUT"}, {PHASE_MSGIN, "MSGIN"}, + {PHASE_DATAOUT, "DATAOUT"}, + {PHASE_DATAIN, "DATAIN"}, + {PHASE_CMDOUT, "CMDOUT"}, + {PHASE_STATIN, "STATIN"}, + {PHASE_MSGOUT, "MSGOUT"}, + {PHASE_MSGIN, "MSGIN"}, {PHASE_UNKNOWN, "UNKNOWN"} }; @@ -553,8 +533,6 @@ static struct { * @instance: adapter to dump * * Print the current SCSI phase for debugging purposes - * - * Locks: none */ static void NCR5380_print_phase(struct Scsi_Host *instance) @@ -564,54 +542,21 @@ static void NCR5380_print_phase(struct Scsi_Host *instance) status = NCR5380_read(STATUS_REG); if (!(status & SR_REQ)) - printk(KERN_DEBUG "scsi%d: REQ not asserted, phase unknown.\n", HOSTNO); + shost_printk(KERN_DEBUG, instance, "REQ not asserted, phase unknown.\n"); else { for (i = 0; (phases[i].value != PHASE_UNKNOWN) && (phases[i].value != (status & PHASE_MASK)); ++i) ; - printk(KERN_DEBUG "scsi%d: phase %s\n", HOSTNO, phases[i].name); + shost_printk(KERN_DEBUG, instance, "phase %s\n", phases[i].name); } } - #endif -/* - * ++roman: New scheme of calling NCR5380_main() - * - * If we're not in an interrupt, we can call our main directly, it cannot be - * already running. Else, we queue it on a task queue, if not 'main_running' - * tells us that a lower level is already executing it. This way, - * 'main_running' needs not be protected in a special way. - * - * queue_main() is a utility function for putting our main onto the task - * queue, if main_running is false. It should be called only from a - * interrupt or bottom half. - */ - -#include <linux/gfp.h> -#include <linux/workqueue.h> -#include <linux/interrupt.h> - -static inline void queue_main(struct NCR5380_hostdata *hostdata) -{ - if (!hostdata->main_running) { - /* If in interrupt and NCR5380_main() not already running, - queue it on the 'immediate' task queue, to be processed - immediately after the current interrupt processing has - finished. */ - schedule_work(&hostdata->main_task); - } - /* else: nothing to do: the running NCR5380_main() will pick up - any newly queued command. */ -} - /** * NCR58380_info - report driver and host information * @instance: relevant scsi host instance * * For use as the host template info() handler. - * - * Locks: none */ static const char *NCR5380_info(struct Scsi_Host *instance) @@ -630,13 +575,14 @@ static void prepare_info(struct Scsi_Host *instance) "base 0x%lx, irq %d, " "can_queue %d, cmd_per_lun %d, " "sg_tablesize %d, this_id %d, " - "flags { %s}, " + "flags { %s%s}, " "options { %s} ", instance->hostt->name, instance->io_port, instance->n_io_port, instance->base, instance->irq, instance->can_queue, instance->cmd_per_lun, instance->sg_tablesize, instance->this_id, hostdata->flags & FLAG_TAGGED_QUEUING ? "TAGGED_QUEUING " : "", + hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY " : "", #ifdef DIFFERENTIAL "DIFFERENTIAL " #endif @@ -653,102 +599,6 @@ static void prepare_info(struct Scsi_Host *instance) } /** - * NCR5380_print_status - dump controller info - * @instance: controller to dump - * - * Print commands in the various queues, called from NCR5380_abort - * to aid debugging. - */ - -static void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd) -{ - int i, s; - unsigned char *command; - printk("scsi%d: destination target %d, lun %llu\n", - H_NO(cmd), cmd->device->id, cmd->device->lun); - printk(KERN_CONT " command = "); - command = cmd->cmnd; - printk(KERN_CONT "%2d (0x%02x)", command[0], command[0]); - for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i) - printk(KERN_CONT " %02x", command[i]); - printk("\n"); -} - -static void NCR5380_print_status(struct Scsi_Host *instance) -{ - struct NCR5380_hostdata *hostdata; - struct scsi_cmnd *ptr; - unsigned long flags; - - NCR5380_dprint(NDEBUG_ANY, instance); - NCR5380_dprint_phase(NDEBUG_ANY, instance); - - hostdata = (struct NCR5380_hostdata *)instance->hostdata; - - local_irq_save(flags); - printk("NCR5380: coroutine is%s running.\n", - hostdata->main_running ? "" : "n't"); - if (!hostdata->connected) - printk("scsi%d: no currently connected command\n", HOSTNO); - else - lprint_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected); - printk("scsi%d: issue_queue\n", HOSTNO); - for (ptr = (struct scsi_cmnd *)hostdata->issue_queue; ptr; ptr = NEXT(ptr)) - lprint_Scsi_Cmnd(ptr); - - printk("scsi%d: disconnected_queue\n", HOSTNO); - for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr; - ptr = NEXT(ptr)) - lprint_Scsi_Cmnd(ptr); - - local_irq_restore(flags); - printk("\n"); -} - -static void show_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m) -{ - int i, s; - unsigned char *command; - seq_printf(m, "scsi%d: destination target %d, lun %llu\n", - H_NO(cmd), cmd->device->id, cmd->device->lun); - seq_puts(m, " command = "); - command = cmd->cmnd; - seq_printf(m, "%2d (0x%02x)", command[0], command[0]); - for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i) - seq_printf(m, " %02x", command[i]); - seq_putc(m, '\n'); -} - -static int __maybe_unused NCR5380_show_info(struct seq_file *m, - struct Scsi_Host *instance) -{ - struct NCR5380_hostdata *hostdata; - struct scsi_cmnd *ptr; - unsigned long flags; - - hostdata = (struct NCR5380_hostdata *)instance->hostdata; - - local_irq_save(flags); - seq_printf(m, "NCR5380: coroutine is%s running.\n", - hostdata->main_running ? "" : "n't"); - if (!hostdata->connected) - seq_printf(m, "scsi%d: no currently connected command\n", HOSTNO); - else - show_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected, m); - seq_printf(m, "scsi%d: issue_queue\n", HOSTNO); - for (ptr = (struct scsi_cmnd *)hostdata->issue_queue; ptr; ptr = NEXT(ptr)) - show_Scsi_Cmnd(ptr, m); - - seq_printf(m, "scsi%d: disconnected_queue\n", HOSTNO); - for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr; - ptr = NEXT(ptr)) - show_Scsi_Cmnd(ptr, m); - - local_irq_restore(flags); - return 0; -} - -/** * NCR5380_init - initialise an NCR5380 * @instance: adapter to configure * @flags: control flags @@ -764,11 +614,11 @@ static int __maybe_unused NCR5380_show_info(struct seq_file *m, static int __init NCR5380_init(struct Scsi_Host *instance, int flags) { + struct NCR5380_hostdata *hostdata = shost_priv(instance); int i; - SETUP_HOSTDATA(instance); + unsigned long deadline; hostdata->host = instance; - hostdata->aborted = 0; hostdata->id_mask = 1 << instance->this_id; hostdata->id_higher_mask = 0; for (i = hostdata->id_mask; i <= 0x80; i <<= 1) @@ -782,13 +632,21 @@ static int __init NCR5380_init(struct Scsi_Host *instance, int flags) #if defined (REAL_DMA) hostdata->dma_len = 0; #endif - hostdata->targets_present = 0; + spin_lock_init(&hostdata->lock); hostdata->connected = NULL; - hostdata->issue_queue = NULL; - hostdata->disconnected_queue = NULL; + hostdata->sensing = NULL; + INIT_LIST_HEAD(&hostdata->autosense); + INIT_LIST_HEAD(&hostdata->unissued); + INIT_LIST_HEAD(&hostdata->disconnected); + hostdata->flags = flags; INIT_WORK(&hostdata->main_task, NCR5380_main); + hostdata->work_q = alloc_workqueue("ncr5380_%d", + WQ_UNBOUND | WQ_MEM_RECLAIM, + 1, instance->host_no); + if (!hostdata->work_q) + return -ENOMEM; prepare_info(instance); @@ -797,6 +655,72 @@ static int __init NCR5380_init(struct Scsi_Host *instance, int flags) NCR5380_write(TARGET_COMMAND_REG, 0); NCR5380_write(SELECT_ENABLE_REG, 0); + /* Calibrate register polling loop */ + i = 0; + deadline = jiffies + 1; + do { + cpu_relax(); + } while (time_is_after_jiffies(deadline)); + deadline += msecs_to_jiffies(256); + do { + NCR5380_read(STATUS_REG); + ++i; + cpu_relax(); + } while (time_is_after_jiffies(deadline)); + hostdata->accesses_per_ms = i / 256; + + return 0; +} + +/** + * NCR5380_maybe_reset_bus - Detect and correct bus wedge problems. + * @instance: adapter to check + * + * If the system crashed, it may have crashed with a connected target and + * the SCSI bus busy. Check for BUS FREE phase. If not, try to abort the + * currently established nexus, which we know nothing about. Failing that + * do a bus reset. + * + * Note that a bus reset will cause the chip to assert IRQ. + * + * Returns 0 if successful, otherwise -ENXIO. + */ + +static int NCR5380_maybe_reset_bus(struct Scsi_Host *instance) +{ + struct NCR5380_hostdata *hostdata = shost_priv(instance); + int pass; + + for (pass = 1; (NCR5380_read(STATUS_REG) & SR_BSY) && pass <= 6; ++pass) { + switch (pass) { + case 1: + case 3: + case 5: + shost_printk(KERN_ERR, instance, "SCSI bus busy, waiting up to five seconds\n"); + NCR5380_poll_politely(instance, + STATUS_REG, SR_BSY, 0, 5 * HZ); + break; + case 2: + shost_printk(KERN_ERR, instance, "bus busy, attempting abort\n"); + do_abort(instance); + break; + case 4: + shost_printk(KERN_ERR, instance, "bus busy, attempting reset\n"); + do_reset(instance); + /* Wait after a reset; the SCSI standard calls for + * 250ms, we wait 500ms to be on the safe side. + * But some Toshiba CD-ROMs need ten times that. + */ + if (hostdata->flags & FLAG_TOSHIBA_DELAY) + msleep(2500); + else + msleep(500); + break; + case 6: + shost_printk(KERN_ERR, instance, "bus locked solid\n"); + return -ENXIO; + } + } return 0; } @@ -812,6 +736,38 @@ static void NCR5380_exit(struct Scsi_Host *instance) struct NCR5380_hostdata *hostdata = shost_priv(instance); cancel_work_sync(&hostdata->main_task); + destroy_workqueue(hostdata->work_q); +} + +/** + * complete_cmd - finish processing a command and return it to the SCSI ML + * @instance: the host instance + * @cmd: command to complete + */ + +static void complete_cmd(struct Scsi_Host *instance, + struct scsi_cmnd *cmd) +{ + struct NCR5380_hostdata *hostdata = shost_priv(instance); + + dsprintk(NDEBUG_QUEUES, instance, "complete_cmd: cmd %p\n", cmd); + + if (hostdata->sensing == cmd) { + /* Autosense processing ends here */ + if ((cmd->result & 0xff) != SAM_STAT_GOOD) { + scsi_eh_restore_cmnd(cmd, &hostdata->ses); + set_host_byte(cmd, DID_ERROR); + } else + scsi_eh_restore_cmnd(cmd, &hostdata->ses); + hostdata->sensing = NULL; + } + +#ifdef SUPPORT_TAGS + cmd_free_tag(cmd); +#else + hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun); +#endif + cmd->scsi_done(cmd); } /** @@ -819,7 +775,7 @@ static void NCR5380_exit(struct Scsi_Host *instance) * @instance: the relevant SCSI adapter * @cmd: SCSI command * - * cmd is added to the per instance issue_queue, with minor + * cmd is added to the per-instance issue queue, with minor * twiddling done to the host specific fields of cmd. If the * main coroutine is not running, it is restarted. */ @@ -828,44 +784,23 @@ static int NCR5380_queue_command(struct Scsi_Host *instance, struct scsi_cmnd *cmd) { struct NCR5380_hostdata *hostdata = shost_priv(instance); - struct scsi_cmnd *tmp; + struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd); unsigned long flags; #if (NDEBUG & NDEBUG_NO_WRITE) switch (cmd->cmnd[0]) { case WRITE_6: case WRITE_10: - printk(KERN_NOTICE "scsi%d: WRITE attempted with NO_WRITE debugging flag set\n", - H_NO(cmd)); + shost_printk(KERN_DEBUG, instance, "WRITE attempted with NDEBUG_NO_WRITE set\n"); cmd->result = (DID_ERROR << 16); cmd->scsi_done(cmd); return 0; } #endif /* (NDEBUG & NDEBUG_NO_WRITE) */ - /* - * We use the host_scribble field as a pointer to the next command - * in a queue - */ - - SET_NEXT(cmd, NULL); cmd->result = 0; /* - * Insert the cmd into the issue queue. Note that REQUEST SENSE - * commands are added to the head of the queue since any command will - * clear the contingent allegiance condition that exists and the - * sense data is only guaranteed to be valid while the condition exists. - */ - - /* ++guenther: now that the issue queue is being set up, we can lock ST-DMA. - * Otherwise a running NCR5380_main may steal the lock. - * Lock before actually inserting due to fairness reasons explained in - * atari_scsi.c. If we insert first, then it's impossible for this driver - * to release the lock. - * Stop timer for this command while waiting for the lock, or timeouts - * may happen (and they really do), and it's no good if the command doesn't - * appear in any of the queues. * ++roman: Just disabling the NCR interrupt isn't sufficient here, * because also a timer int can trigger an abort or reset, which would * alter queues and touch the lock. @@ -873,7 +808,7 @@ static int NCR5380_queue_command(struct Scsi_Host *instance, if (!NCR5380_acquire_dma_irq(instance)) return SCSI_MLQUEUE_HOST_BUSY; - local_irq_save(flags); + spin_lock_irqsave(&hostdata->lock, flags); /* * Insert the cmd into the issue queue. Note that REQUEST SENSE @@ -882,33 +817,18 @@ static int NCR5380_queue_command(struct Scsi_Host *instance, * sense data is only guaranteed to be valid while the condition exists. */ - if (!(hostdata->issue_queue) || (cmd->cmnd[0] == REQUEST_SENSE)) { - LIST(cmd, hostdata->issue_queue); - SET_NEXT(cmd, hostdata->issue_queue); - hostdata->issue_queue = cmd; - } else { - for (tmp = (struct scsi_cmnd *)hostdata->issue_queue; - NEXT(tmp); tmp = NEXT(tmp)) - ; - LIST(cmd, tmp); - SET_NEXT(tmp, cmd); - } - local_irq_restore(flags); + if (cmd->cmnd[0] == REQUEST_SENSE) + list_add(&ncmd->list, &hostdata->unissued); + else + list_add_tail(&ncmd->list, &hostdata->unissued); - dprintk(NDEBUG_QUEUES, "scsi%d: command added to %s of queue\n", H_NO(cmd), - (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail"); + spin_unlock_irqrestore(&hostdata->lock, flags); - /* If queue_command() is called from an interrupt (real one or bottom - * half), we let queue_main() do the job of taking care about main. If it - * is already running, this is a no-op, else main will be queued. - * - * If we're not in an interrupt, we can call NCR5380_main() - * unconditionally, because it cannot be already running. - */ - if (in_interrupt() || irqs_disabled()) - queue_main(hostdata); - else - NCR5380_main(&hostdata->main_task); + dsprintk(NDEBUG_QUEUES, instance, "command %p added to %s of queue\n", + cmd, (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail"); + + /* Kick off command processing */ + queue_work(hostdata->work_q, &hostdata->main_task); return 0; } @@ -917,22 +837,85 @@ static inline void maybe_release_dma_irq(struct Scsi_Host *instance) struct NCR5380_hostdata *hostdata = shost_priv(instance); /* Caller does the locking needed to set & test these data atomically */ - if (!hostdata->disconnected_queue && - !hostdata->issue_queue && + if (list_empty(&hostdata->disconnected) && + list_empty(&hostdata->unissued) && + list_empty(&hostdata->autosense) && !hostdata->connected && - !hostdata->retain_dma_intr) + !hostdata->selecting) NCR5380_release_dma_irq(instance); } /** + * dequeue_next_cmd - dequeue a command for processing + * @instance: the scsi host instance + * + * Priority is given to commands on the autosense queue. These commands + * need autosense because of a CHECK CONDITION result. + * + * Returns a command pointer if a command is found for a target that is + * not already busy. Otherwise returns NULL. + */ + +static struct scsi_cmnd *dequeue_next_cmd(struct Scsi_Host *instance) +{ + struct NCR5380_hostdata *hostdata = shost_priv(instance); + struct NCR5380_cmd *ncmd; + struct scsi_cmnd *cmd; + + if (list_empty(&hostdata->autosense)) { + list_for_each_entry(ncmd, &hostdata->unissued, list) { + cmd = NCR5380_to_scmd(ncmd); + dsprintk(NDEBUG_QUEUES, instance, "dequeue: cmd=%p target=%d busy=0x%02x lun=%llu\n", + cmd, scmd_id(cmd), hostdata->busy[scmd_id(cmd)], cmd->device->lun); + + if ( +#ifdef SUPPORT_TAGS + !is_lun_busy(cmd, 1) +#else + !(hostdata->busy[scmd_id(cmd)] & (1 << cmd->device->lun)) +#endif + ) { + list_del(&ncmd->list); + dsprintk(NDEBUG_QUEUES, instance, + "dequeue: removed %p from issue queue\n", cmd); + return cmd; + } + } + } else { + /* Autosense processing begins here */ + ncmd = list_first_entry(&hostdata->autosense, + struct NCR5380_cmd, list); + list_del(&ncmd->list); + cmd = NCR5380_to_scmd(ncmd); + dsprintk(NDEBUG_QUEUES, instance, + "dequeue: removed %p from autosense queue\n", cmd); + scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0); + hostdata->sensing = cmd; + return cmd; + } + return NULL; +} + +static void requeue_cmd(struct Scsi_Host *instance, struct scsi_cmnd *cmd) +{ + struct NCR5380_hostdata *hostdata = shost_priv(instance); + struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd); + + if (hostdata->sensing) { + scsi_eh_restore_cmnd(cmd, &hostdata->ses); + list_add(&ncmd->list, &hostdata->autosense); + hostdata->sensing = NULL; + } else + list_add(&ncmd->list, &hostdata->unissued); +} + +/** * NCR5380_main - NCR state machines * * NCR5380_main is a coroutine that runs as long as more work can * be done on the NCR5380 host adapters in a system. Both * NCR5380_queue_command() and NCR5380_intr() will try to start it * in case it is not running. - * - * Locks: called as its own thread with no locks held. */ static void NCR5380_main(struct work_struct *work) @@ -940,154 +923,69 @@ static void NCR5380_main(struct work_struct *work) struct NCR5380_hostdata *hostdata = container_of(work, struct NCR5380_hostdata, main_task); struct Scsi_Host *instance = hostdata->host; - struct scsi_cmnd *tmp, *prev; + struct scsi_cmnd *cmd; int done; - unsigned long flags; /* - * We run (with interrupts disabled) until we're sure that none of - * the host adapters have anything that can be done, at which point - * we set main_running to 0 and exit. - * - * Interrupts are enabled before doing various other internal - * instructions, after we've decided that we need to run through - * the loop again. - * - * this should prevent any race conditions. - * * ++roman: Just disabling the NCR interrupt isn't sufficient here, * because also a timer int can trigger an abort or reset, which can * alter queues and touch the Falcon lock. */ - /* Tell int handlers main() is now already executing. Note that - no races are possible here. If an int comes in before - 'main_running' is set here, and queues/executes main via the - task queue, it doesn't do any harm, just this instance of main - won't find any work left to do. */ - if (hostdata->main_running) - return; - hostdata->main_running = 1; - - local_save_flags(flags); do { - local_irq_disable(); /* Freeze request queues */ done = 1; - if (!hostdata->connected) { - dprintk(NDEBUG_MAIN, "scsi%d: not connected\n", HOSTNO); - /* - * Search through the issue_queue for a command destined - * for a target that's not busy. - */ -#if (NDEBUG & NDEBUG_LISTS) - for (tmp = (struct scsi_cmnd *) hostdata->issue_queue, prev = NULL; - tmp && (tmp != prev); prev = tmp, tmp = NEXT(tmp)) - ; - /*printk("%p ", tmp);*/ - if ((tmp == prev) && tmp) - printk(" LOOP\n"); - /* else printk("\n"); */ -#endif - for (tmp = (struct scsi_cmnd *) hostdata->issue_queue, - prev = NULL; tmp; prev = tmp, tmp = NEXT(tmp)) { - u8 lun = tmp->device->lun; - - dprintk(NDEBUG_LISTS, - "MAIN tmp=%p target=%d busy=%d lun=%d\n", - tmp, scmd_id(tmp), hostdata->busy[scmd_id(tmp)], - lun); - /* When we find one, remove it from the issue queue. */ - /* ++guenther: possible race with Falcon locking */ - if ( -#ifdef SUPPORT_TAGS - !is_lun_busy( tmp, tmp->cmnd[0] != REQUEST_SENSE) -#else - !(hostdata->busy[tmp->device->id] & (1 << lun)) -#endif - ) { - /* ++guenther: just to be sure, this must be atomic */ - local_irq_disable(); - if (prev) { - REMOVE(prev, NEXT(prev), tmp, NEXT(tmp)); - SET_NEXT(prev, NEXT(tmp)); - } else { - REMOVE(-1, hostdata->issue_queue, tmp, NEXT(tmp)); - hostdata->issue_queue = NEXT(tmp); - } - SET_NEXT(tmp, NULL); - hostdata->retain_dma_intr++; + spin_lock_irq(&hostdata->lock); + while (!hostdata->connected && + (cmd = dequeue_next_cmd(instance))) { - /* reenable interrupts after finding one */ - local_irq_restore(flags); + dsprintk(NDEBUG_MAIN, instance, "main: dequeued %p\n", cmd); - /* - * Attempt to establish an I_T_L nexus here. - * On success, instance->hostdata->connected is set. - * On failure, we must add the command back to the - * issue queue so we can keep trying. - */ - dprintk(NDEBUG_MAIN, "scsi%d: main(): command for target %d " - "lun %d removed from issue_queue\n", - HOSTNO, tmp->device->id, lun); - /* - * REQUEST SENSE commands are issued without tagged - * queueing, even on SCSI-II devices because the - * contingent allegiance condition exists for the - * entire unit. - */ - /* ++roman: ...and the standard also requires that - * REQUEST SENSE command are untagged. - */ + /* + * Attempt to establish an I_T_L nexus here. + * On success, instance->hostdata->connected is set. + * On failure, we must add the command back to the + * issue queue so we can keep trying. + */ + /* + * REQUEST SENSE commands are issued without tagged + * queueing, even on SCSI-II devices because the + * contingent allegiance condition exists for the + * entire unit. + */ + /* ++roman: ...and the standard also requires that + * REQUEST SENSE command are untagged. + */ #ifdef SUPPORT_TAGS - cmd_get_tag(tmp, tmp->cmnd[0] != REQUEST_SENSE); + cmd_get_tag(cmd, cmd->cmnd[0] != REQUEST_SENSE); #endif - if (!NCR5380_select(instance, tmp)) { - local_irq_disable(); - hostdata->retain_dma_intr--; - /* release if target did not response! */ - maybe_release_dma_irq(instance); - local_irq_restore(flags); - break; - } else { - local_irq_disable(); - LIST(tmp, hostdata->issue_queue); - SET_NEXT(tmp, hostdata->issue_queue); - hostdata->issue_queue = tmp; + cmd = NCR5380_select(instance, cmd); + if (!cmd) { + dsprintk(NDEBUG_MAIN, instance, "main: select complete\n"); + maybe_release_dma_irq(instance); + } else { + dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES, instance, + "main: select failed, returning %p to queue\n", cmd); + requeue_cmd(instance, cmd); #ifdef SUPPORT_TAGS - cmd_free_tag(tmp); + cmd_free_tag(cmd); #endif - hostdata->retain_dma_intr--; - local_irq_restore(flags); - dprintk(NDEBUG_MAIN, "scsi%d: main(): select() failed, " - "returned to issue_queue\n", HOSTNO); - if (hostdata->connected) - break; - } - } /* if target/lun/target queue is not busy */ - } /* for issue_queue */ - } /* if (!hostdata->connected) */ - + } + } if (hostdata->connected #ifdef REAL_DMA && !hostdata->dma_len #endif ) { - local_irq_restore(flags); - dprintk(NDEBUG_MAIN, "scsi%d: main: performing information transfer\n", - HOSTNO); + dsprintk(NDEBUG_MAIN, instance, "main: performing information transfer\n"); NCR5380_information_transfer(instance); - dprintk(NDEBUG_MAIN, "scsi%d: main: done set false\n", HOSTNO); done = 0; } + spin_unlock_irq(&hostdata->lock); + if (!done) + cond_resched(); } while (!done); - - /* Better allow ints _after_ 'main_running' has been cleared, else - an interrupt could believe we'll pick up the work it left for - us, but we won't see it anymore here... */ - hostdata->main_running = 0; - local_irq_restore(flags); } @@ -1096,27 +994,20 @@ static void NCR5380_main(struct work_struct *work) * Function : void NCR5380_dma_complete (struct Scsi_Host *instance) * * Purpose : Called by interrupt handler when DMA finishes or a phase - * mismatch occurs (which would finish the DMA transfer). + * mismatch occurs (which would finish the DMA transfer). * * Inputs : instance - this instance of the NCR5380. - * */ static void NCR5380_dma_complete(struct Scsi_Host *instance) { - SETUP_HOSTDATA(instance); + struct NCR5380_hostdata *hostdata = shost_priv(instance); int transferred; unsigned char **data; - volatile int *count; + int *count; int saved_data = 0, overrun = 0; unsigned char p; - if (!hostdata->connected) { - printk(KERN_WARNING "scsi%d: received end of DMA interrupt with " - "no connected cmd\n", HOSTNO); - return; - } - if (hostdata->read_overruns) { p = hostdata->connected->SCp.phase; if (p & SR_IO) { @@ -1126,15 +1017,11 @@ static void NCR5380_dma_complete(struct Scsi_Host *instance) (BASR_PHASE_MATCH|BASR_ACK)) { saved_data = NCR5380_read(INPUT_DATA_REG); overrun = 1; - dprintk(NDEBUG_DMA, "scsi%d: read overrun handled\n", HOSTNO); + dsprintk(NDEBUG_DMA, instance, "read overrun handled\n"); } } } - dprintk(NDEBUG_DMA, "scsi%d: real DMA transfer complete, basr 0x%X, sr 0x%X\n", - HOSTNO, NCR5380_read(BUS_AND_STATUS_REG), - NCR5380_read(STATUS_REG)); - #if defined(CONFIG_SUN3) if ((sun3scsi_dma_finish(rq_data_dir(hostdata->connected->request)))) { pr_err("scsi%d: overrun in UDC counter -- not prepared to deal with this!\n", @@ -1153,9 +1040,9 @@ static void NCR5380_dma_complete(struct Scsi_Host *instance) } #endif - (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG); NCR5380_write(MODE_REG, MR_BASE); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); + NCR5380_read(RESET_PARITY_INTERRUPT_REG); transferred = hostdata->dma_len - NCR5380_dma_residual(instance); hostdata->dma_len = 0; @@ -1194,140 +1081,160 @@ static void NCR5380_dma_complete(struct Scsi_Host *instance) * Handle interrupts, reestablishing I_T_L or I_T_L_Q nexuses * from the disconnected queue, and restarting NCR5380_main() * as required. + * + * The chip can assert IRQ in any of six different conditions. The IRQ flag + * is then cleared by reading the Reset Parity/Interrupt Register (RPIR). + * Three of these six conditions are latched in the Bus and Status Register: + * - End of DMA (cleared by ending DMA Mode) + * - Parity error (cleared by reading RPIR) + * - Loss of BSY (cleared by reading RPIR) + * Two conditions have flag bits that are not latched: + * - Bus phase mismatch (non-maskable in DMA Mode, cleared by ending DMA Mode) + * - Bus reset (non-maskable) + * The remaining condition has no flag bit at all: + * - Selection/reselection + * + * Hence, establishing the cause(s) of any interrupt is partly guesswork. + * In "The DP8490 and DP5380 Comparison Guide", National Semiconductor + * claimed that "the design of the [DP8490] interrupt logic ensures + * interrupts will not be lost (they can be on the DP5380)." + * The L5380/53C80 datasheet from LOGIC Devices has more details. + * + * Checking for bus reset by reading RST is futile because of interrupt + * latency, but a bus reset will reset chip logic. Checking for parity error + * is unnecessary because that interrupt is never enabled. A Loss of BSY + * condition will clear DMA Mode. We can tell when this occurs because the + * the Busy Monitor interrupt is enabled together with DMA Mode. */ static irqreturn_t NCR5380_intr(int irq, void *dev_id) { struct Scsi_Host *instance = dev_id; - int done = 1, handled = 0; + struct NCR5380_hostdata *hostdata = shost_priv(instance); + int handled = 0; unsigned char basr; + unsigned long flags; - dprintk(NDEBUG_INTR, "scsi%d: NCR5380 irq triggered\n", HOSTNO); + spin_lock_irqsave(&hostdata->lock, flags); - /* Look for pending interrupts */ basr = NCR5380_read(BUS_AND_STATUS_REG); - dprintk(NDEBUG_INTR, "scsi%d: BASR=%02x\n", HOSTNO, basr); - /* dispatch to appropriate routine if found and done=0 */ if (basr & BASR_IRQ) { - NCR5380_dprint(NDEBUG_INTR, instance); - if ((NCR5380_read(STATUS_REG) & (SR_SEL|SR_IO)) == (SR_SEL|SR_IO)) { - done = 0; - dprintk(NDEBUG_INTR, "scsi%d: SEL interrupt\n", HOSTNO); - NCR5380_reselect(instance); - (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG); - } else if (basr & BASR_PARITY_ERROR) { - dprintk(NDEBUG_INTR, "scsi%d: PARITY interrupt\n", HOSTNO); - (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG); - } else if ((NCR5380_read(STATUS_REG) & SR_RST) == SR_RST) { - dprintk(NDEBUG_INTR, "scsi%d: RESET interrupt\n", HOSTNO); - (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG); - } else { - /* - * The rest of the interrupt conditions can occur only during a - * DMA transfer - */ + unsigned char mr = NCR5380_read(MODE_REG); + unsigned char sr = NCR5380_read(STATUS_REG); + + dsprintk(NDEBUG_INTR, instance, "IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n", + irq, basr, sr, mr); #if defined(REAL_DMA) - /* - * We should only get PHASE MISMATCH and EOP interrupts if we have - * DMA enabled, so do a sanity check based on the current setting - * of the MODE register. + if ((mr & MR_DMA_MODE) || (mr & MR_MONITOR_BSY)) { + /* Probably End of DMA, Phase Mismatch or Loss of BSY. + * We ack IRQ after clearing Mode Register. Workarounds + * for End of DMA errata need to happen in DMA Mode. */ - if ((NCR5380_read(MODE_REG) & MR_DMA_MODE) && - ((basr & BASR_END_DMA_TRANSFER) || - !(basr & BASR_PHASE_MATCH))) { + dsprintk(NDEBUG_INTR, instance, "interrupt in DMA mode\n"); - dprintk(NDEBUG_INTR, "scsi%d: PHASE MISM or EOP interrupt\n", HOSTNO); - NCR5380_dma_complete( instance ); - done = 0; - } else + if (hostdata->connected) { + NCR5380_dma_complete(instance); + queue_work(hostdata->work_q, &hostdata->main_task); + } else { + NCR5380_write(MODE_REG, MR_BASE); + NCR5380_read(RESET_PARITY_INTERRUPT_REG); + } + } else #endif /* REAL_DMA */ - { -/* MS: Ignore unknown phase mismatch interrupts (caused by EOP interrupt) */ - if (basr & BASR_PHASE_MATCH) - dprintk(NDEBUG_INTR, "scsi%d: unknown interrupt, " - "BASR 0x%x, MR 0x%x, SR 0x%x\n", - HOSTNO, basr, NCR5380_read(MODE_REG), - NCR5380_read(STATUS_REG)); - (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG); + if ((NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_mask) && + (sr & (SR_SEL | SR_IO | SR_BSY | SR_RST)) == (SR_SEL | SR_IO)) { + /* Probably reselected */ + NCR5380_write(SELECT_ENABLE_REG, 0); + NCR5380_read(RESET_PARITY_INTERRUPT_REG); + + dsprintk(NDEBUG_INTR, instance, "interrupt with SEL and IO\n"); + + if (!hostdata->connected) { + NCR5380_reselect(instance); + queue_work(hostdata->work_q, &hostdata->main_task); + } + if (!hostdata->connected) + NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); + } else { + /* Probably Bus Reset */ + NCR5380_read(RESET_PARITY_INTERRUPT_REG); + + dsprintk(NDEBUG_INTR, instance, "unknown interrupt\n"); #ifdef SUN3_SCSI_VME - dregs->csr |= CSR_DMA_ENABLE; + dregs->csr |= CSR_DMA_ENABLE; #endif - } - } /* if !(SELECTION || PARITY) */ + } handled = 1; - } /* BASR & IRQ */ else { - printk(KERN_NOTICE "scsi%d: interrupt without IRQ bit set in BASR, " - "BASR 0x%X, MR 0x%X, SR 0x%x\n", HOSTNO, basr, - NCR5380_read(MODE_REG), NCR5380_read(STATUS_REG)); - (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG); + } else { + shost_printk(KERN_NOTICE, instance, "interrupt without IRQ bit\n"); #ifdef SUN3_SCSI_VME dregs->csr |= CSR_DMA_ENABLE; #endif } - if (!done) { - dprintk(NDEBUG_INTR, "scsi%d: in int routine, calling main\n", HOSTNO); - /* Put a call to NCR5380_main() on the queue... */ - queue_main(shost_priv(instance)); - } + spin_unlock_irqrestore(&hostdata->lock, flags); + return IRQ_RETVAL(handled); } /* * Function : int NCR5380_select(struct Scsi_Host *instance, - * struct scsi_cmnd *cmd) + * struct scsi_cmnd *cmd) * * Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command, - * including ARBITRATION, SELECTION, and initial message out for - * IDENTIFY and queue messages. + * including ARBITRATION, SELECTION, and initial message out for + * IDENTIFY and queue messages. * * Inputs : instance - instantiation of the 5380 driver on which this - * target lives, cmd - SCSI command to execute. + * target lives, cmd - SCSI command to execute. * - * Returns : -1 if selection could not execute for some reason, - * 0 if selection succeeded or failed because the target - * did not respond. + * Returns cmd if selection failed but should be retried, + * NULL if selection failed and should not be retried, or + * NULL if selection succeeded (hostdata->connected == cmd). * * Side effects : - * If bus busy, arbitration failed, etc, NCR5380_select() will exit - * with registers as they should have been on entry - ie - * SELECT_ENABLE will be set appropriately, the NCR5380 - * will cease to drive any SCSI bus signals. + * If bus busy, arbitration failed, etc, NCR5380_select() will exit + * with registers as they should have been on entry - ie + * SELECT_ENABLE will be set appropriately, the NCR5380 + * will cease to drive any SCSI bus signals. * - * If successful : I_T_L or I_T_L_Q nexus will be established, - * instance->connected will be set to cmd. - * SELECT interrupt will be disabled. + * If successful : I_T_L or I_T_L_Q nexus will be established, + * instance->connected will be set to cmd. + * SELECT interrupt will be disabled. * - * If failed (no target) : cmd->scsi_done() will be called, and the - * cmd->result host byte set to DID_BAD_TARGET. + * If failed (no target) : cmd->scsi_done() will be called, and the + * cmd->result host byte set to DID_BAD_TARGET. */ -static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) +static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance, + struct scsi_cmnd *cmd) { - SETUP_HOSTDATA(instance); + struct NCR5380_hostdata *hostdata = shost_priv(instance); unsigned char tmp[3], phase; unsigned char *data; int len; - unsigned long timeout; - unsigned long flags; + int err; - hostdata->restart_select = 0; NCR5380_dprint(NDEBUG_ARBITRATION, instance); - dprintk(NDEBUG_ARBITRATION, "scsi%d: starting arbitration, id = %d\n", HOSTNO, - instance->this_id); + dsprintk(NDEBUG_ARBITRATION, instance, "starting arbitration, id = %d\n", + instance->this_id); + + /* + * Arbitration and selection phases are slow and involve dropping the + * lock, so we have to watch out for EH. An exception handler may + * change 'selecting' to NULL. This function will then return NULL + * so that the caller will forget about 'cmd'. (During information + * transfer phases, EH may change 'connected' to NULL.) + */ + hostdata->selecting = cmd; /* * Set the phase bits to 0, otherwise the NCR5380 won't drive the * data bus during SELECTION. */ - local_irq_save(flags); - if (hostdata->connected) { - local_irq_restore(flags); - return -1; - } NCR5380_write(TARGET_COMMAND_REG, 0); /* @@ -1337,96 +1244,77 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask); NCR5380_write(MODE_REG, MR_ARBITRATE); - local_irq_restore(flags); - - /* Wait for arbitration logic to complete */ -#if defined(NCR_TIMEOUT) - { - unsigned long timeout = jiffies + 2*NCR_TIMEOUT; + /* The chip now waits for BUS FREE phase. Then after the 800 ns + * Bus Free Delay, arbitration will begin. + */ - while (!(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS) && - time_before(jiffies, timeout) && !hostdata->connected) - ; - if (time_after_eq(jiffies, timeout)) { - printk("scsi : arbitration timeout at %d\n", __LINE__); - NCR5380_write(MODE_REG, MR_BASE); - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - return -1; - } + spin_unlock_irq(&hostdata->lock); + err = NCR5380_poll_politely2(instance, MODE_REG, MR_ARBITRATE, 0, + INITIATOR_COMMAND_REG, ICR_ARBITRATION_PROGRESS, + ICR_ARBITRATION_PROGRESS, HZ); + spin_lock_irq(&hostdata->lock); + if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) { + /* Reselection interrupt */ + goto out; } -#else /* NCR_TIMEOUT */ - while (!(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS) && - !hostdata->connected) - ; -#endif - - dprintk(NDEBUG_ARBITRATION, "scsi%d: arbitration complete\n", HOSTNO); - - if (hostdata->connected) { + if (err < 0) { NCR5380_write(MODE_REG, MR_BASE); - return -1; + shost_printk(KERN_ERR, instance, + "select: arbitration timeout\n"); + goto out; } - /* - * The arbitration delay is 2.2us, but this is a minimum and there is - * no maximum so we can safely sleep for ceil(2.2) usecs to accommodate - * the integral nature of udelay(). - * - */ + spin_unlock_irq(&hostdata->lock); + /* The SCSI-2 arbitration delay is 2.4 us */ udelay(3); /* Check for lost arbitration */ if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) || (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) || - (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) || - hostdata->connected) { + (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) { NCR5380_write(MODE_REG, MR_BASE); - dprintk(NDEBUG_ARBITRATION, "scsi%d: lost arbitration, deasserting MR_ARBITRATE\n", - HOSTNO); - return -1; + dsprintk(NDEBUG_ARBITRATION, instance, "lost arbitration, deasserting MR_ARBITRATE\n"); + spin_lock_irq(&hostdata->lock); + goto out; } - /* after/during arbitration, BSY should be asserted. - IBM DPES-31080 Version S31Q works now */ - /* Tnx to Thomas_Roesch@m2.maus.de for finding this! (Roman) */ + /* After/during arbitration, BSY should be asserted. + * IBM DPES-31080 Version S31Q works now + * Tnx to Thomas_Roesch@m2.maus.de for finding this! (Roman) + */ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_SEL | ICR_ASSERT_BSY); - if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) || - hostdata->connected) { - NCR5380_write(MODE_REG, MR_BASE); - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - dprintk(NDEBUG_ARBITRATION, "scsi%d: lost arbitration, deasserting ICR_ASSERT_SEL\n", - HOSTNO); - return -1; - } - /* * Again, bus clear + bus settle time is 1.2us, however, this is * a minimum so we'll udelay ceil(1.2) */ -#ifdef CONFIG_ATARI_SCSI_TOSHIBA_DELAY - /* ++roman: But some targets (see above :-) seem to need a bit more... */ - udelay(15); -#else - udelay(2); -#endif + if (hostdata->flags & FLAG_TOSHIBA_DELAY) + udelay(15); + else + udelay(2); - if (hostdata->connected) { + spin_lock_irq(&hostdata->lock); + + /* NCR5380_reselect() clears MODE_REG after a reselection interrupt */ + if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) + goto out; + + if (!hostdata->selecting) { NCR5380_write(MODE_REG, MR_BASE); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - return -1; + goto out; } - dprintk(NDEBUG_ARBITRATION, "scsi%d: won arbitration\n", HOSTNO); + dsprintk(NDEBUG_ARBITRATION, instance, "won arbitration\n"); /* * Now that we have won arbitration, start Selection process, asserting * the host and target ID's on the SCSI bus. */ - NCR5380_write(OUTPUT_DATA_REG, (hostdata->id_mask | (1 << cmd->device->id))); + NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask | (1 << scmd_id(cmd))); /* * Raise ATN while SEL is true before BSY goes false from arbitration, @@ -1434,22 +1322,18 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) * phase immediately after selection. */ - NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_BSY | - ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL )); + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY | + ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL); NCR5380_write(MODE_REG, MR_BASE); /* * Reselect interrupts must be turned off prior to the dropping of BSY, * otherwise we will trigger an interrupt. */ - - if (hostdata->connected) { - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - return -1; - } - NCR5380_write(SELECT_ENABLE_REG, 0); + spin_unlock_irq(&hostdata->lock); + /* * The initiator shall then wait at least two deskew delays and release * the BSY signal. @@ -1457,8 +1341,8 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */ /* Reset BSY */ - NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_DATA | - ICR_ASSERT_ATN | ICR_ASSERT_SEL)); + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | + ICR_ASSERT_ATN | ICR_ASSERT_SEL); /* * Something weird happens when we cease to drive BSY - looks @@ -1479,45 +1363,39 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) udelay(1); - dprintk(NDEBUG_SELECTION, "scsi%d: selecting target %d\n", HOSTNO, cmd->device->id); + dsprintk(NDEBUG_SELECTION, instance, "selecting target %d\n", scmd_id(cmd)); /* * The SCSI specification calls for a 250 ms timeout for the actual * selection. */ - timeout = jiffies + msecs_to_jiffies(250); - - /* - * XXX very interesting - we're seeing a bounce where the BSY we - * asserted is being reflected / still asserted (propagation delay?) - * and it's detecting as true. Sigh. - */ - -#if 0 - /* ++roman: If a target conformed to the SCSI standard, it wouldn't assert - * IO while SEL is true. But again, there are some disks out the in the - * world that do that nevertheless. (Somebody claimed that this announces - * reselection capability of the target.) So we better skip that test and - * only wait for BSY... (Famous german words: Der Klügere gibt nach :-) - */ - - while (time_before(jiffies, timeout) && - !(NCR5380_read(STATUS_REG) & (SR_BSY | SR_IO))) - ; + err = NCR5380_poll_politely(instance, STATUS_REG, SR_BSY, SR_BSY, + msecs_to_jiffies(250)); if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) == (SR_SEL | SR_IO)) { + spin_lock_irq(&hostdata->lock); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); NCR5380_reselect(instance); - printk(KERN_ERR "scsi%d: reselection after won arbitration?\n", - HOSTNO); + if (!hostdata->connected) + NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); + shost_printk(KERN_ERR, instance, "reselection after won arbitration?\n"); + goto out; + } + + if (err < 0) { + spin_lock_irq(&hostdata->lock); + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - return -1; + /* Can't touch cmd if it has been reclaimed by the scsi ML */ + if (hostdata->selecting) { + cmd->result = DID_BAD_TARGET << 16; + complete_cmd(instance, cmd); + dsprintk(NDEBUG_SELECTION, instance, "target did not respond within 250ms\n"); + cmd = NULL; + } + goto out; } -#else - while (time_before(jiffies, timeout) && !(NCR5380_read(STATUS_REG) & SR_BSY)) - ; -#endif /* * No less than two deskew delays after the initiator detects the @@ -1529,29 +1407,6 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); - if (!(NCR5380_read(STATUS_REG) & SR_BSY)) { - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - if (hostdata->targets_present & (1 << cmd->device->id)) { - printk(KERN_ERR "scsi%d: weirdness\n", HOSTNO); - if (hostdata->restart_select) - printk(KERN_NOTICE "\trestart select\n"); - NCR5380_dprint(NDEBUG_ANY, instance); - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - return -1; - } - cmd->result = DID_BAD_TARGET << 16; -#ifdef SUPPORT_TAGS - cmd_free_tag(cmd); -#endif - cmd->scsi_done(cmd); - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - dprintk(NDEBUG_SELECTION, "scsi%d: target did not respond within 250ms\n", HOSTNO); - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - return 0; - } - - hostdata->targets_present |= (1 << cmd->device->id); - /* * Since we followed the SCSI spec, and raised ATN while SEL * was true but before BSY was false during selection, the information @@ -1563,16 +1418,27 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) * until it wraps back to 0. * * XXX - it turns out that there are some broken SCSI-II devices, - * which claim to support tagged queuing but fail when more than - * some number of commands are issued at once. + * which claim to support tagged queuing but fail when more than + * some number of commands are issued at once. */ /* Wait for start of REQ/ACK handshake */ - while (!(NCR5380_read(STATUS_REG) & SR_REQ)) - ; - dprintk(NDEBUG_SELECTION, "scsi%d: target %d selected, going into MESSAGE OUT phase.\n", - HOSTNO, cmd->device->id); + err = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ); + spin_lock_irq(&hostdata->lock); + if (err < 0) { + shost_printk(KERN_ERR, instance, "select: REQ timeout\n"); + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); + NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); + goto out; + } + if (!hostdata->selecting) { + do_abort(instance); + goto out; + } + + dsprintk(NDEBUG_SELECTION, instance, "target %d selected, going into MESSAGE OUT phase.\n", + scmd_id(cmd)); tmp[0] = IDENTIFY(1, cmd->device->lun); #ifdef SUPPORT_TAGS @@ -1591,11 +1457,12 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) data = tmp; phase = PHASE_MSGOUT; NCR5380_transfer_pio(instance, &phase, &len, &data); - dprintk(NDEBUG_SELECTION, "scsi%d: nexus established.\n", HOSTNO); + dsprintk(NDEBUG_SELECTION, instance, "nexus established.\n"); /* XXX need to handle errors here */ + hostdata->connected = cmd; #ifndef SUPPORT_TAGS - hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun); + hostdata->busy[cmd->device->id] |= 1 << cmd->device->lun; #endif #ifdef SUN3_SCSI_VME dregs->csr |= CSR_INTR; @@ -1603,24 +1470,30 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) initialize_SCp(cmd); - return 0; + cmd = NULL; + +out: + if (!hostdata->selecting) + return NULL; + hostdata->selecting = NULL; + return cmd; } /* * Function : int NCR5380_transfer_pio (struct Scsi_Host *instance, - * unsigned char *phase, int *count, unsigned char **data) + * unsigned char *phase, int *count, unsigned char **data) * * Purpose : transfers data in given phase using polled I/O * * Inputs : instance - instance of driver, *phase - pointer to - * what phase is expected, *count - pointer to number of - * bytes to transfer, **data - pointer to data pointer. + * what phase is expected, *count - pointer to number of + * bytes to transfer, **data - pointer to data pointer. * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes are transferred or exit - * is in same phase. + * maximum number of bytes, 0 if all bytes are transferred or exit + * is in same phase. * - * Also, *phase, *count, *data are modified in place. + * Also, *phase, *count, *data are modified in place. * * XXX Note : handling for bus free may be useful. */ @@ -1635,9 +1508,9 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data) { - register unsigned char p = *phase, tmp; - register int c = *count; - register unsigned char *d = *data; + unsigned char p = *phase, tmp; + int c = *count; + unsigned char *d = *data; /* * The NCR5380 chip will only drive the SCSI bus when the @@ -1652,14 +1525,15 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance, * Wait for assertion of REQ, after which the phase bits will be * valid */ - while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ)) - ; - dprintk(NDEBUG_HANDSHAKE, "scsi%d: REQ detected\n", HOSTNO); + if (NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ) < 0) + break; + + dsprintk(NDEBUG_HANDSHAKE, instance, "REQ asserted\n"); /* Check for phase mismatch */ - if ((tmp & PHASE_MASK) != p) { - dprintk(NDEBUG_PIO, "scsi%d: phase mismatch\n", HOSTNO); + if ((NCR5380_read(STATUS_REG) & PHASE_MASK) != p) { + dsprintk(NDEBUG_PIO, instance, "phase mismatch\n"); NCR5380_dprint_phase(NDEBUG_PIO, instance); break; } @@ -1684,35 +1558,36 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance, NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA); NCR5380_dprint(NDEBUG_PIO, instance); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | - ICR_ASSERT_DATA | ICR_ASSERT_ACK); + ICR_ASSERT_DATA | ICR_ASSERT_ACK); } else { NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | - ICR_ASSERT_DATA | ICR_ASSERT_ATN); + ICR_ASSERT_DATA | ICR_ASSERT_ATN); NCR5380_dprint(NDEBUG_PIO, instance); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | - ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK); + ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK); } } else { NCR5380_dprint(NDEBUG_PIO, instance); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK); } - while (NCR5380_read(STATUS_REG) & SR_REQ) - ; + if (NCR5380_poll_politely(instance, + STATUS_REG, SR_REQ, 0, 5 * HZ) < 0) + break; - dprintk(NDEBUG_HANDSHAKE, "scsi%d: req false, handshake complete\n", HOSTNO); + dsprintk(NDEBUG_HANDSHAKE, instance, "REQ negated, handshake complete\n"); - /* - * We have several special cases to consider during REQ/ACK handshaking : - * 1. We were in MSGOUT phase, and we are on the last byte of the - * message. ATN must be dropped as ACK is dropped. - * - * 2. We are in a MSGIN phase, and we are on the last byte of the - * message. We must exit with ACK asserted, so that the calling - * code may raise ATN before dropping ACK to reject the message. - * - * 3. ACK and ATN are clear and the target may proceed as normal. - */ +/* + * We have several special cases to consider during REQ/ACK handshaking : + * 1. We were in MSGOUT phase, and we are on the last byte of the + * message. ATN must be dropped as ACK is dropped. + * + * 2. We are in a MSGIN phase, and we are on the last byte of the + * message. We must exit with ACK asserted, so that the calling + * code may raise ATN before dropping ACK to reject the message. + * + * 3. ACK and ATN are clear and the target may proceed as normal. + */ if (!(p == PHASE_MSGIN && c == 1)) { if (p == PHASE_MSGOUT && c > 1) NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); @@ -1721,16 +1596,16 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance, } } while (--c); - dprintk(NDEBUG_PIO, "scsi%d: residual %d\n", HOSTNO, c); + dsprintk(NDEBUG_PIO, instance, "residual %d\n", c); *count = c; *data = d; tmp = NCR5380_read(STATUS_REG); /* The phase read from the bus is valid if either REQ is (already) - * asserted or if ACK hasn't been released yet. The latter is the case if - * we're in MSGIN and all wanted bytes have been received. + * asserted or if ACK hasn't been released yet. The latter applies if + * we're in MSG IN, DATA IN or STATUS and all bytes have been received. */ - if ((tmp & SR_REQ) || (p == PHASE_MSGIN && c == 0)) + if ((tmp & SR_REQ) || ((tmp & SR_IO) && c == 0)) *phase = tmp & PHASE_MASK; else *phase = PHASE_UNKNOWN; @@ -1741,19 +1616,45 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance, return -1; } -/* - * Function : do_abort (Scsi_Host *host) +/** + * do_reset - issue a reset command + * @instance: adapter to reset * - * Purpose : abort the currently established nexus. Should only be - * called from a routine which can drop into a + * Issue a reset sequence to the NCR5380 and try and get the bus + * back into sane shape. * - * Returns : 0 on success, -1 on failure. + * This clears the reset interrupt flag because there may be no handler for + * it. When the driver is initialized, the NCR5380_intr() handler has not yet + * been installed. And when in EH we may have released the ST DMA interrupt. + */ + +static void do_reset(struct Scsi_Host *instance) +{ + unsigned long flags; + + local_irq_save(flags); + NCR5380_write(TARGET_COMMAND_REG, + PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK)); + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST); + udelay(50); + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); + (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG); + local_irq_restore(flags); +} + +/** + * do_abort - abort the currently established nexus by going to + * MESSAGE OUT phase and sending an ABORT message. + * @instance: relevant scsi host instance + * + * Returns 0 on success, -1 on failure. */ static int do_abort(struct Scsi_Host *instance) { - unsigned char tmp, *msgptr, phase; + unsigned char *msgptr, phase, tmp; int len; + int rc; /* Request message out phase */ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); @@ -1768,16 +1669,20 @@ static int do_abort(struct Scsi_Host *instance) * the target sees, so we just handshake. */ - while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ)) - ; + rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 10 * HZ); + if (rc < 0) + goto timeout; + + tmp = NCR5380_read(STATUS_REG) & PHASE_MASK; NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp)); - if ((tmp & PHASE_MASK) != PHASE_MSGOUT) { - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | - ICR_ASSERT_ACK); - while (NCR5380_read(STATUS_REG) & SR_REQ) - ; + if (tmp != PHASE_MSGOUT) { + NCR5380_write(INITIATOR_COMMAND_REG, + ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK); + rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 3 * HZ); + if (rc < 0) + goto timeout; NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); } @@ -1793,26 +1698,29 @@ static int do_abort(struct Scsi_Host *instance) */ return len ? -1 : 0; + +timeout: + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); + return -1; } #if defined(REAL_DMA) /* * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance, - * unsigned char *phase, int *count, unsigned char **data) + * unsigned char *phase, int *count, unsigned char **data) * * Purpose : transfers data in given phase using either real - * or pseudo DMA. + * or pseudo DMA. * * Inputs : instance - instance of driver, *phase - pointer to - * what phase is expected, *count - pointer to number of - * bytes to transfer, **data - pointer to data pointer. + * what phase is expected, *count - pointer to number of + * bytes to transfer, **data - pointer to data pointer. * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes or transferred or exit - * is in same phase. - * - * Also, *phase, *count, *data are modified in place. + * maximum number of bytes, 0 if all bytes or transferred or exit + * is in same phase. * + * Also, *phase, *count, *data are modified in place. */ @@ -1820,10 +1728,9 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data) { - SETUP_HOSTDATA(instance); + struct NCR5380_hostdata *hostdata = shost_priv(instance); register int c = *count; register unsigned char p = *phase; - unsigned long flags; #if defined(CONFIG_SUN3) /* sanity check */ @@ -1834,29 +1741,22 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, } hostdata->dma_len = c; - dprintk(NDEBUG_DMA, "scsi%d: initializing DMA for %s, %d bytes %s %p\n", - instance->host_no, (p & SR_IO) ? "reading" : "writing", - c, (p & SR_IO) ? "to" : "from", *data); + dsprintk(NDEBUG_DMA, instance, "initializing DMA %s: length %d, address %p\n", + (p & SR_IO) ? "receive" : "send", c, *data); /* netbsd turns off ints here, why not be safe and do it too */ - local_irq_save(flags); /* send start chain */ sun3scsi_dma_start(c, *data); + NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p)); + NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY | + MR_ENABLE_EOP_INTR); if (p & SR_IO) { - NCR5380_write(TARGET_COMMAND_REG, 1); - NCR5380_read(RESET_PARITY_INTERRUPT_REG); NCR5380_write(INITIATOR_COMMAND_REG, 0); - NCR5380_write(MODE_REG, - (NCR5380_read(MODE_REG) | MR_DMA_MODE | MR_ENABLE_EOP_INTR)); NCR5380_write(START_DMA_INITIATOR_RECEIVE_REG, 0); } else { - NCR5380_write(TARGET_COMMAND_REG, 0); - NCR5380_read(RESET_PARITY_INTERRUPT_REG); NCR5380_write(INITIATOR_COMMAND_REG, ICR_ASSERT_DATA); - NCR5380_write(MODE_REG, - (NCR5380_read(MODE_REG) | MR_DMA_MODE | MR_ENABLE_EOP_INTR)); NCR5380_write(START_DMA_SEND_REG, 0); } @@ -1864,8 +1764,6 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, dregs->csr |= CSR_DMA_ENABLE; #endif - local_irq_restore(flags); - sun3_dma_active = 1; #else /* !defined(CONFIG_SUN3) */ @@ -1880,25 +1778,20 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, if (hostdata->read_overruns && (p & SR_IO)) c -= hostdata->read_overruns; - dprintk(NDEBUG_DMA, "scsi%d: initializing DMA for %s, %d bytes %s %p\n", - HOSTNO, (p & SR_IO) ? "reading" : "writing", - c, (p & SR_IO) ? "to" : "from", d); + dsprintk(NDEBUG_DMA, instance, "initializing DMA %s: length %d, address %p\n", + (p & SR_IO) ? "receive" : "send", c, d); NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p)); - -#ifdef REAL_DMA - NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_ENABLE_EOP_INTR | MR_MONITOR_BSY); -#endif /* def REAL_DMA */ + NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY | + MR_ENABLE_EOP_INTR); if (!(hostdata->flags & FLAG_LATE_DMA_SETUP)) { /* On the Medusa, it is a must to initialize the DMA before * starting the NCR. This is also the cleaner way for the TT. */ - local_irq_save(flags); hostdata->dma_len = (p & SR_IO) ? NCR5380_dma_read_setup(instance, d, c) : NCR5380_dma_write_setup(instance, d, c); - local_irq_restore(flags); } if (p & SR_IO) @@ -1912,11 +1805,9 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, /* On the Falcon, the DMA setup must be done after the last */ /* NCR access, else the DMA setup gets trashed! */ - local_irq_save(flags); hostdata->dma_len = (p & SR_IO) ? NCR5380_dma_read_setup(instance, d, c) : NCR5380_dma_write_setup(instance, d, c); - local_irq_restore(flags); } #endif /* !defined(CONFIG_SUN3) */ @@ -1928,23 +1819,22 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, * Function : NCR5380_information_transfer (struct Scsi_Host *instance) * * Purpose : run through the various SCSI phases and do as the target - * directs us to. Operates on the currently connected command, - * instance->connected. + * directs us to. Operates on the currently connected command, + * instance->connected. * * Inputs : instance, instance for which we are doing commands * * Side effects : SCSI things happen, the disconnected queue will be - * modified if a command disconnects, *instance->connected will - * change. + * modified if a command disconnects, *instance->connected will + * change. * * XXX Note : we need to watch for bus free or a reset condition here - * to recover from an unexpected bus free condition. + * to recover from an unexpected bus free condition. */ static void NCR5380_information_transfer(struct Scsi_Host *instance) { - SETUP_HOSTDATA(instance); - unsigned long flags; + struct NCR5380_hostdata *hostdata = shost_priv(instance); unsigned char msgout = NOP; int sink = 0; int len; @@ -1953,13 +1843,15 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) #endif unsigned char *data; unsigned char phase, tmp, extended_msg[10], old_phase = 0xff; - struct scsi_cmnd *cmd = (struct scsi_cmnd *) hostdata->connected; + struct scsi_cmnd *cmd; #ifdef SUN3_SCSI_VME dregs->csr |= CSR_INTR; #endif - while (1) { + while ((cmd = hostdata->connected)) { + struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd); + tmp = NCR5380_read(STATUS_REG); /* We only have a valid SCSI phase when REQ is asserted */ if (tmp & SR_REQ) { @@ -1984,7 +1876,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) /* this command setup for dma yet? */ if ((count >= DMA_MIN_SIZE) && (sun3_dma_setup_done != cmd)) { if (cmd->request->cmd_type == REQ_TYPE_FS) { - sun3scsi_dma_setup(d, count, + sun3scsi_dma_setup(instance, d, count, rq_data_dir(cmd->request)); sun3_dma_setup_done = cmd; } @@ -2000,11 +1892,11 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp)); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | - ICR_ASSERT_ACK); + ICR_ASSERT_ACK); while (NCR5380_read(STATUS_REG) & SR_REQ) ; NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | - ICR_ASSERT_ATN); + ICR_ASSERT_ATN); sink = 0; continue; } @@ -2012,12 +1904,11 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) switch (phase) { case PHASE_DATAOUT: #if (NDEBUG & NDEBUG_NO_DATAOUT) - printk("scsi%d: NDEBUG_NO_DATAOUT set, attempted DATAOUT " - "aborted\n", HOSTNO); + shost_printk(KERN_DEBUG, instance, "NDEBUG_NO_DATAOUT set, attempted DATAOUT aborted\n"); sink = 1; do_abort(instance); cmd->result = DID_ERROR << 16; - cmd->scsi_done(cmd); + complete_cmd(instance, cmd); return; #endif case PHASE_DATAIN: @@ -2031,13 +1922,10 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) --cmd->SCp.buffers_residual; cmd->SCp.this_residual = cmd->SCp.buffer->length; cmd->SCp.ptr = sg_virt(cmd->SCp.buffer); - /* ++roman: Try to merge some scatter-buffers if - * they are at contiguous physical addresses. - */ merge_contiguous_buffers(cmd); - dprintk(NDEBUG_INFORMATION, "scsi%d: %d bytes and %d buffers left\n", - HOSTNO, cmd->SCp.this_residual, - cmd->SCp.buffers_residual); + dsprintk(NDEBUG_INFORMATION, instance, "%d bytes and %d buffers left\n", + cmd->SCp.this_residual, + cmd->SCp.buffers_residual); } /* @@ -2051,16 +1939,18 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) */ /* ++roman: I suggest, this should be - * #if def(REAL_DMA) + * #if def(REAL_DMA) * instead of leaving REAL_DMA out. */ #if defined(REAL_DMA) - if ( #if !defined(CONFIG_SUN3) - !cmd->device->borken && + transfersize = 0; + if (!cmd->device->borken) #endif - (transfersize = NCR5380_dma_xfer_len(instance, cmd, phase)) >= DMA_MIN_SIZE) { + transfersize = NCR5380_dma_xfer_len(instance, cmd, phase); + + if (transfersize >= DMA_MIN_SIZE) { len = transfersize; cmd->SCp.phase = phase; if (NCR5380_transfer_dma(instance, &phase, @@ -2068,16 +1958,15 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) /* * If the watchdog timer fires, all future * accesses to this device will use the - * polled-IO. */ + * polled-IO. + */ scmd_printk(KERN_INFO, cmd, "switching to slow handshake\n"); cmd->device->borken = 1; - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | - ICR_ASSERT_ATN); sink = 1; do_abort(instance); cmd->result = DID_ERROR << 16; - cmd->scsi_done(cmd); + complete_cmd(instance, cmd); /* XXX - need to source or sink data here, as appropriate */ } else { #ifdef REAL_DMA @@ -2093,9 +1982,13 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) } } else #endif /* defined(REAL_DMA) */ + { + spin_unlock_irq(&hostdata->lock); NCR5380_transfer_pio(instance, &phase, - (int *)&cmd->SCp.this_residual, - (unsigned char **)&cmd->SCp.ptr); + (int *)&cmd->SCp.this_residual, + (unsigned char **)&cmd->SCp.ptr); + spin_lock_irq(&hostdata->lock); + } #if defined(CONFIG_SUN3) && defined(REAL_DMA) /* if we had intended to dma that command clear it */ if (sun3_dma_setup_done == cmd) @@ -2105,162 +1998,64 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) case PHASE_MSGIN: len = 1; data = &tmp; - NCR5380_write(SELECT_ENABLE_REG, 0); /* disable reselects */ NCR5380_transfer_pio(instance, &phase, &len, &data); cmd->SCp.Message = tmp; switch (tmp) { - /* - * Linking lets us reduce the time required to get the - * next command out to the device, hopefully this will - * mean we don't waste another revolution due to the delays - * required by ARBITRATION and another SELECTION. - * - * In the current implementation proposal, low level drivers - * merely have to start the next command, pointed to by - * next_link, done() is called as with unlinked commands. - */ -#ifdef LINKED - case LINKED_CMD_COMPLETE: - case LINKED_FLG_CMD_COMPLETE: - /* Accept message by clearing ACK */ - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - - dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %llu linked command " - "complete.\n", HOSTNO, cmd->device->id, cmd->device->lun); - - /* Enable reselect interrupts */ - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - /* - * Sanity check : A linked command should only terminate - * with one of these messages if there are more linked - * commands available. - */ - - if (!cmd->next_link) { - printk(KERN_NOTICE "scsi%d: target %d lun %llu " - "linked command complete, no next_link\n", - HOSTNO, cmd->device->id, cmd->device->lun); - sink = 1; - do_abort(instance); - return; - } - - initialize_SCp(cmd->next_link); - /* The next command is still part of this process; copy it - * and don't free it! */ - cmd->next_link->tag = cmd->tag; - cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8); - dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %llu linked request " - "done, calling scsi_done().\n", - HOSTNO, cmd->device->id, cmd->device->lun); - cmd->scsi_done(cmd); - cmd = hostdata->connected; - break; -#endif /* def LINKED */ case ABORT: case COMMAND_COMPLETE: /* Accept message by clearing ACK */ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - dprintk(NDEBUG_QUEUES, "scsi%d: command for target %d, lun %llu " - "completed\n", HOSTNO, cmd->device->id, cmd->device->lun); + dsprintk(NDEBUG_QUEUES, instance, + "COMMAND COMPLETE %p target %d lun %llu\n", + cmd, scmd_id(cmd), cmd->device->lun); - local_irq_save(flags); - hostdata->retain_dma_intr++; hostdata->connected = NULL; #ifdef SUPPORT_TAGS cmd_free_tag(cmd); if (status_byte(cmd->SCp.Status) == QUEUE_FULL) { - /* Turn a QUEUE FULL status into BUSY, I think the - * mid level cannot handle QUEUE FULL :-( (The - * command is retried after BUSY). Also update our - * queue size to the number of currently issued - * commands now. - */ - /* ++Andreas: the mid level code knows about - QUEUE_FULL now. */ - struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][cmd->device->lun]; - dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %llu returned " - "QUEUE_FULL after %d commands\n", - HOSTNO, cmd->device->id, cmd->device->lun, - ta->nr_allocated); + u8 lun = cmd->device->lun; + struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][lun]; + + dsprintk(NDEBUG_TAGS, instance, + "QUEUE_FULL %p target %d lun %d nr_allocated %d\n", + cmd, scmd_id(cmd), lun, ta->nr_allocated); if (ta->queue_size > ta->nr_allocated) - ta->nr_allocated = ta->queue_size; + ta->queue_size = ta->nr_allocated; } -#else - hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun); #endif - /* Enable reselect interrupts */ - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - - /* - * I'm not sure what the correct thing to do here is : - * - * If the command that just executed is NOT a request - * sense, the obvious thing to do is to set the result - * code to the values of the stored parameters. - * - * If it was a REQUEST SENSE command, we need some way to - * differentiate between the failure code of the original - * and the failure code of the REQUEST sense - the obvious - * case is success, where we fall through and leave the - * result code unchanged. - * - * The non-obvious place is where the REQUEST SENSE failed - */ - - if (cmd->cmnd[0] != REQUEST_SENSE) - cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8); - else if (status_byte(cmd->SCp.Status) != GOOD) - cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16); - - if ((cmd->cmnd[0] == REQUEST_SENSE) && - hostdata->ses.cmd_len) { - scsi_eh_restore_cmnd(cmd, &hostdata->ses); - hostdata->ses.cmd_len = 0 ; - } - - if ((cmd->cmnd[0] != REQUEST_SENSE) && - (status_byte(cmd->SCp.Status) == CHECK_CONDITION)) { - scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0); - - dprintk(NDEBUG_AUTOSENSE, "scsi%d: performing request sense\n", HOSTNO); - LIST(cmd,hostdata->issue_queue); - SET_NEXT(cmd, hostdata->issue_queue); - hostdata->issue_queue = (struct scsi_cmnd *) cmd; - dprintk(NDEBUG_QUEUES, "scsi%d: REQUEST SENSE added to head of " - "issue queue\n", H_NO(cmd)); - } else { - cmd->scsi_done(cmd); + cmd->result &= ~0xffff; + cmd->result |= cmd->SCp.Status; + cmd->result |= cmd->SCp.Message << 8; + + if (cmd->cmnd[0] == REQUEST_SENSE) + complete_cmd(instance, cmd); + else { + if (cmd->SCp.Status == SAM_STAT_CHECK_CONDITION || + cmd->SCp.Status == SAM_STAT_COMMAND_TERMINATED) { + dsprintk(NDEBUG_QUEUES, instance, "autosense: adding cmd %p to tail of autosense queue\n", + cmd); + list_add_tail(&ncmd->list, + &hostdata->autosense); + } else + complete_cmd(instance, cmd); } - local_irq_restore(flags); - - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); /* * Restore phase bits to 0 so an interrupted selection, * arbitration can resume. */ NCR5380_write(TARGET_COMMAND_REG, 0); - while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected) - barrier(); + /* Enable reselect interrupts */ + NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - local_irq_save(flags); - hostdata->retain_dma_intr--; - /* ++roman: For Falcon SCSI, release the lock on the - * ST-DMA here if no other commands are waiting on the - * disconnected queue. - */ maybe_release_dma_irq(instance); - local_irq_restore(flags); return; case MESSAGE_REJECT: /* Accept message by clearing ACK */ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - /* Enable reselect interrupts */ - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); switch (hostdata->last_message) { case HEAD_OF_QUEUE_TAG: case ORDERED_QUEUE_TAG: @@ -2274,27 +2069,20 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) cmd->device->tagged_supported = 0; hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun); cmd->tag = TAG_NONE; - dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %llu rejected " - "QUEUE_TAG message; tagged queuing " - "disabled\n", - HOSTNO, cmd->device->id, cmd->device->lun); + dsprintk(NDEBUG_TAGS, instance, "target %d lun %llu rejected QUEUE_TAG message; tagged queuing disabled\n", + scmd_id(cmd), cmd->device->lun); break; } break; case DISCONNECT: /* Accept message by clearing ACK */ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - local_irq_save(flags); - cmd->device->disconnect = 1; - LIST(cmd,hostdata->disconnected_queue); - SET_NEXT(cmd, hostdata->disconnected_queue); hostdata->connected = NULL; - hostdata->disconnected_queue = cmd; - local_irq_restore(flags); - dprintk(NDEBUG_QUEUES, "scsi%d: command for target %d lun %llu was " - "moved from connected to the " - "disconnected_queue\n", HOSTNO, - cmd->device->id, cmd->device->lun); + list_add(&ncmd->list, &hostdata->disconnected); + dsprintk(NDEBUG_INFORMATION | NDEBUG_QUEUES, + instance, "connected command %p for target %d lun %llu moved to disconnected queue\n", + cmd, scmd_id(cmd), cmd->device->lun); + /* * Restore phase bits to 0 so an interrupted selection, * arbitration can resume. @@ -2303,9 +2091,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) /* Enable reselect interrupts */ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - /* Wait for bus free to avoid nasty timeouts */ - while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected) - barrier(); #ifdef SUN3_SCSI_VME dregs->csr |= CSR_DMA_ENABLE; #endif @@ -2324,37 +2109,30 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) case RESTORE_POINTERS: /* Accept message by clearing ACK */ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - /* Enable reselect interrupts */ - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); break; case EXTENDED_MESSAGE: /* - * Extended messages are sent in the following format : - * Byte - * 0 EXTENDED_MESSAGE == 1 - * 1 length (includes one byte for code, doesn't - * include first two bytes) - * 2 code - * 3..length+1 arguments - * - * Start the extended message buffer with the EXTENDED_MESSAGE + * Start the message buffer with the EXTENDED_MESSAGE * byte, since spi_print_msg() wants the whole thing. */ extended_msg[0] = EXTENDED_MESSAGE; /* Accept first byte by clearing ACK */ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - dprintk(NDEBUG_EXTENDED, "scsi%d: receiving extended message\n", HOSTNO); + spin_unlock_irq(&hostdata->lock); + + dsprintk(NDEBUG_EXTENDED, instance, "receiving extended message\n"); len = 2; data = extended_msg + 1; phase = PHASE_MSGIN; NCR5380_transfer_pio(instance, &phase, &len, &data); - dprintk(NDEBUG_EXTENDED, "scsi%d: length=%d, code=0x%02x\n", HOSTNO, - (int)extended_msg[1], (int)extended_msg[2]); + dsprintk(NDEBUG_EXTENDED, instance, "length %d, code 0x%02x\n", + (int)extended_msg[1], + (int)extended_msg[2]); - if (!len && extended_msg[1] <= - (sizeof(extended_msg) - 1)) { + if (!len && extended_msg[1] > 0 && + extended_msg[1] <= sizeof(extended_msg) - 2) { /* Accept third byte by clearing ACK */ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); len = extended_msg[1] - 1; @@ -2362,8 +2140,8 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) phase = PHASE_MSGIN; NCR5380_transfer_pio(instance, &phase, &len, &data); - dprintk(NDEBUG_EXTENDED, "scsi%d: message received, residual %d\n", - HOSTNO, len); + dsprintk(NDEBUG_EXTENDED, instance, "message received, residual %d\n", + len); switch (extended_msg[2]) { case EXTENDED_SDTR: @@ -2373,15 +2151,18 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) tmp = 0; } } else if (len) { - printk(KERN_NOTICE "scsi%d: error receiving " - "extended message\n", HOSTNO); + shost_printk(KERN_ERR, instance, "error receiving extended message\n"); tmp = 0; } else { - printk(KERN_NOTICE "scsi%d: extended message " - "code %02x length %d is too long\n", - HOSTNO, extended_msg[2], extended_msg[1]); + shost_printk(KERN_NOTICE, instance, "extended message code %02x length %d is too long\n", + extended_msg[2], extended_msg[1]); tmp = 0; } + + spin_lock_irq(&hostdata->lock); + if (!hostdata->connected) + return; + /* Fall through to reject message */ /* @@ -2390,8 +2171,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) */ default: if (!tmp) { - printk(KERN_INFO "scsi%d: rejecting message ", - instance->host_no); + shost_printk(KERN_ERR, instance, "rejecting message "); spi_print_msg(extended_msg); printk("\n"); } else if (tmp != EXTENDED_MESSAGE) @@ -2414,18 +2194,11 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) hostdata->last_message = msgout; NCR5380_transfer_pio(instance, &phase, &len, &data); if (msgout == ABORT) { - local_irq_save(flags); -#ifdef SUPPORT_TAGS - cmd_free_tag(cmd); -#else - hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun); -#endif hostdata->connected = NULL; cmd->result = DID_ERROR << 16; - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); + complete_cmd(instance, cmd); maybe_release_dma_irq(instance); - local_irq_restore(flags); - cmd->scsi_done(cmd); + NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); return; } msgout = NOP; @@ -2447,22 +2220,25 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) cmd->SCp.Status = tmp; break; default: - printk("scsi%d: unknown phase\n", HOSTNO); + shost_printk(KERN_ERR, instance, "unknown phase\n"); NCR5380_dprint(NDEBUG_ANY, instance); } /* switch(phase) */ - } /* if (tmp * SR_REQ) */ - } /* while (1) */ + } else { + spin_unlock_irq(&hostdata->lock); + NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ); + spin_lock_irq(&hostdata->lock); + } + } } /* * Function : void NCR5380_reselect (struct Scsi_Host *instance) * * Purpose : does reselection, initializing the instance->connected - * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q - * nexus has been reestablished, + * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q + * nexus has been reestablished, * * Inputs : instance - this instance of the NCR5380. - * */ @@ -2471,7 +2247,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) static void NCR5380_reselect(struct Scsi_Host *instance) { - SETUP_HOSTDATA(instance); + struct NCR5380_hostdata *hostdata = shost_priv(instance); unsigned char target_mask; unsigned char lun; #ifdef SUPPORT_TAGS @@ -2480,7 +2256,8 @@ static void NCR5380_reselect(struct Scsi_Host *instance) unsigned char msg[3]; int __maybe_unused len; unsigned char __maybe_unused *data, __maybe_unused phase; - struct scsi_cmnd *tmp = NULL, *prev; + struct NCR5380_cmd *ncmd; + struct scsi_cmnd *tmp; /* * Disable arbitration, etc. since the host adapter obviously @@ -2488,11 +2265,10 @@ static void NCR5380_reselect(struct Scsi_Host *instance) */ NCR5380_write(MODE_REG, MR_BASE); - hostdata->restart_select = 1; target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask); - dprintk(NDEBUG_RESELECTION, "scsi%d: reselect\n", HOSTNO); + dsprintk(NDEBUG_RESELECTION, instance, "reselect\n"); /* * At this point, we have detected that our SCSI ID is on the bus, @@ -2504,17 +2280,22 @@ static void NCR5380_reselect(struct Scsi_Host *instance) */ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY); - - while (NCR5380_read(STATUS_REG) & SR_SEL) - ; + if (NCR5380_poll_politely(instance, + STATUS_REG, SR_SEL, 0, 2 * HZ) < 0) { + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); + return; + } NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); /* * Wait for target to go into MSGIN. */ - while (!(NCR5380_read(STATUS_REG) & SR_REQ)) - ; + if (NCR5380_poll_politely(instance, + STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0) { + do_abort(instance); + return; + } #if defined(CONFIG_SUN3) && defined(REAL_DMA) /* acknowledge toggle to MSGIN */ @@ -2527,15 +2308,21 @@ static void NCR5380_reselect(struct Scsi_Host *instance) data = msg; phase = PHASE_MSGIN; NCR5380_transfer_pio(instance, &phase, &len, &data); + + if (len) { + do_abort(instance); + return; + } #endif if (!(msg[0] & 0x80)) { - printk(KERN_DEBUG "scsi%d: expecting IDENTIFY message, got ", HOSTNO); + shost_printk(KERN_ERR, instance, "expecting IDENTIFY message, got "); spi_print_msg(msg); + printk("\n"); do_abort(instance); return; } - lun = (msg[0] & 0x07); + lun = msg[0] & 0x07; #if defined(SUPPORT_TAGS) && !defined(CONFIG_SUN3) /* If the phase is still MSGIN, the target wants to send some more @@ -2551,8 +2338,8 @@ static void NCR5380_reselect(struct Scsi_Host *instance) if (!NCR5380_transfer_pio(instance, &phase, &len, &data) && msg[1] == SIMPLE_QUEUE_TAG) tag = msg[2]; - dprintk(NDEBUG_TAGS, "scsi%d: target mask %02x, lun %d sent tag %d at " - "reselection\n", HOSTNO, target_mask, lun, tag); + dsprintk(NDEBUG_TAGS, instance, "reselect: target mask %02x, lun %d sent tag %d\n", + target_mask, lun, tag); } #endif @@ -2561,36 +2348,34 @@ static void NCR5380_reselect(struct Scsi_Host *instance) * just reestablished, and remove it from the disconnected queue. */ - for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL; - tmp; prev = tmp, tmp = NEXT(tmp)) { - if ((target_mask == (1 << tmp->device->id)) && (lun == tmp->device->lun) + tmp = NULL; + list_for_each_entry(ncmd, &hostdata->disconnected, list) { + struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd); + + if (target_mask == (1 << scmd_id(cmd)) && + lun == (u8)cmd->device->lun #ifdef SUPPORT_TAGS - && (tag == tmp->tag) + && (tag == cmd->tag) #endif ) { - if (prev) { - REMOVE(prev, NEXT(prev), tmp, NEXT(tmp)); - SET_NEXT(prev, NEXT(tmp)); - } else { - REMOVE(-1, hostdata->disconnected_queue, tmp, NEXT(tmp)); - hostdata->disconnected_queue = NEXT(tmp); - } - SET_NEXT(tmp, NULL); + list_del(&ncmd->list); + tmp = cmd; break; } } - if (!tmp) { - printk(KERN_WARNING "scsi%d: warning: target bitmask %02x lun %d " -#ifdef SUPPORT_TAGS - "tag %d " -#endif - "not in disconnected_queue.\n", - HOSTNO, target_mask, lun + if (tmp) { + dsprintk(NDEBUG_RESELECTION | NDEBUG_QUEUES, instance, + "reselect: removed %p from disconnected queue\n", tmp); + } else { + #ifdef SUPPORT_TAGS - , tag + shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d tag %d not in disconnected queue.\n", + target_mask, lun, tag); +#else + shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d not in disconnected queue.\n", + target_mask, lun); #endif - ); /* * Since we have an established nexus that we can't do anything * with, we must abort it. @@ -2614,7 +2399,8 @@ static void NCR5380_reselect(struct Scsi_Host *instance) } /* setup this command for dma if not already */ if ((count >= DMA_MIN_SIZE) && (sun3_dma_setup_done != tmp)) { - sun3scsi_dma_setup(d, count, rq_data_dir(tmp->request)); + sun3scsi_dma_setup(instance, d, count, + rq_data_dir(tmp->request)); sun3_dma_setup_done = tmp; } } @@ -2639,235 +2425,196 @@ static void NCR5380_reselect(struct Scsi_Host *instance) if (!NCR5380_transfer_pio(instance, &phase, &len, &data) && msg[1] == SIMPLE_QUEUE_TAG) tag = msg[2]; - dprintk(NDEBUG_TAGS, "scsi%d: target mask %02x, lun %d sent tag %d at reselection\n" - HOSTNO, target_mask, lun, tag); + dsprintk(NDEBUG_TAGS, instance, "reselect: target mask %02x, lun %d sent tag %d\n" + target_mask, lun, tag); } #endif hostdata->connected = tmp; - dprintk(NDEBUG_RESELECTION, "scsi%d: nexus established, target = %d, lun = %llu, tag = %d\n", - HOSTNO, tmp->device->id, tmp->device->lun, tmp->tag); + dsprintk(NDEBUG_RESELECTION, instance, "nexus established, target %d, lun %llu, tag %d\n", + scmd_id(tmp), tmp->device->lun, tmp->tag); } -/* - * Function : int NCR5380_abort (struct scsi_cmnd *cmd) - * - * Purpose : abort a command - * - * Inputs : cmd - the scsi_cmnd to abort, code - code to set the - * host byte of the result field to, if zero DID_ABORTED is - * used. - * - * Returns : SUCCESS - success, FAILED on failure. - * - * XXX - there is no way to abort the command that is currently - * connected, you have to wait for it to complete. If this is - * a problem, we could implement longjmp() / setjmp(), setjmp() - * called where the loop started in NCR5380_main(). +/** + * list_find_cmd - test for presence of a command in a linked list + * @haystack: list of commands + * @needle: command to search for */ -static -int NCR5380_abort(struct scsi_cmnd *cmd) +static bool list_find_cmd(struct list_head *haystack, + struct scsi_cmnd *needle) { - struct Scsi_Host *instance = cmd->device->host; - SETUP_HOSTDATA(instance); - struct scsi_cmnd *tmp, **prev; - unsigned long flags; + struct NCR5380_cmd *ncmd; - scmd_printk(KERN_NOTICE, cmd, "aborting command\n"); + list_for_each_entry(ncmd, haystack, list) + if (NCR5380_to_scmd(ncmd) == needle) + return true; + return false; +} - NCR5380_print_status(instance); +/** + * list_remove_cmd - remove a command from linked list + * @haystack: list of commands + * @needle: command to remove + */ - local_irq_save(flags); +static bool list_del_cmd(struct list_head *haystack, + struct scsi_cmnd *needle) +{ + if (list_find_cmd(haystack, needle)) { + struct NCR5380_cmd *ncmd = scsi_cmd_priv(needle); - dprintk(NDEBUG_ABORT, "scsi%d: abort called basr 0x%02x, sr 0x%02x\n", HOSTNO, - NCR5380_read(BUS_AND_STATUS_REG), - NCR5380_read(STATUS_REG)); + list_del(&ncmd->list); + return true; + } + return false; +} -#if 1 - /* - * Case 1 : If the command is the currently executing command, - * we'll set the aborted flag and return control so that - * information transfer routine can exit cleanly. - */ +/** + * NCR5380_abort - scsi host eh_abort_handler() method + * @cmd: the command to be aborted + * + * Try to abort a given command by removing it from queues and/or sending + * the target an abort message. This may not succeed in causing a target + * to abort the command. Nonetheless, the low-level driver must forget about + * the command because the mid-layer reclaims it and it may be re-issued. + * + * The normal path taken by a command is as follows. For EH we trace this + * same path to locate and abort the command. + * + * unissued -> selecting -> [unissued -> selecting ->]... connected -> + * [disconnected -> connected ->]... + * [autosense -> connected ->] done + * + * If cmd is unissued then just remove it. + * If cmd is disconnected, try to select the target. + * If cmd is connected, try to send an abort message. + * If cmd is waiting for autosense, give it a chance to complete but check + * that it isn't left connected. + * If cmd was not found at all then presumably it has already been completed, + * in which case return SUCCESS to try to avoid further EH measures. + * If the command has not completed yet, we must not fail to find it. + */ - if (hostdata->connected == cmd) { +static int NCR5380_abort(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *instance = cmd->device->host; + struct NCR5380_hostdata *hostdata = shost_priv(instance); + unsigned long flags; + int result = SUCCESS; - dprintk(NDEBUG_ABORT, "scsi%d: aborting connected command\n", HOSTNO); - /* - * We should perform BSY checking, and make sure we haven't slipped - * into BUS FREE. - */ + spin_lock_irqsave(&hostdata->lock, flags); - /* NCR5380_write(INITIATOR_COMMAND_REG, ICR_ASSERT_ATN); */ - /* - * Since we can't change phases until we've completed the current - * handshake, we have to source or sink a byte of data if the current - * phase is not MSGOUT. - */ +#if (NDEBUG & NDEBUG_ANY) + scmd_printk(KERN_INFO, cmd, __func__); +#endif + NCR5380_dprint(NDEBUG_ANY, instance); + NCR5380_dprint_phase(NDEBUG_ANY, instance); - /* - * Return control to the executing NCR drive so we can clear the - * aborted flag and get back into our main loop. - */ + if (list_del_cmd(&hostdata->unissued, cmd)) { + dsprintk(NDEBUG_ABORT, instance, + "abort: removed %p from issue queue\n", cmd); + cmd->result = DID_ABORT << 16; + cmd->scsi_done(cmd); /* No tag or busy flag to worry about */ + } - if (do_abort(instance) == 0) { - hostdata->aborted = 1; - hostdata->connected = NULL; - cmd->result = DID_ABORT << 16; -#ifdef SUPPORT_TAGS - cmd_free_tag(cmd); -#else - hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun); -#endif - maybe_release_dma_irq(instance); - local_irq_restore(flags); - cmd->scsi_done(cmd); - return SUCCESS; - } else { - local_irq_restore(flags); - printk("scsi%d: abort of connected command failed!\n", HOSTNO); - return FAILED; - } + if (hostdata->selecting == cmd) { + dsprintk(NDEBUG_ABORT, instance, + "abort: cmd %p == selecting\n", cmd); + hostdata->selecting = NULL; + cmd->result = DID_ABORT << 16; + complete_cmd(instance, cmd); + goto out; } -#endif - /* - * Case 2 : If the command hasn't been issued yet, we simply remove it - * from the issue queue. - */ - for (prev = (struct scsi_cmnd **)&(hostdata->issue_queue), - tmp = (struct scsi_cmnd *)hostdata->issue_queue; - tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp)) { - if (cmd == tmp) { - REMOVE(5, *prev, tmp, NEXT(tmp)); - (*prev) = NEXT(tmp); - SET_NEXT(tmp, NULL); - tmp->result = DID_ABORT << 16; - maybe_release_dma_irq(instance); - local_irq_restore(flags); - dprintk(NDEBUG_ABORT, "scsi%d: abort removed command from issue queue.\n", - HOSTNO); - /* Tagged queuing note: no tag to free here, hasn't been assigned - * yet... */ - tmp->scsi_done(tmp); - return SUCCESS; + if (list_del_cmd(&hostdata->disconnected, cmd)) { + dsprintk(NDEBUG_ABORT, instance, + "abort: removed %p from disconnected list\n", cmd); + cmd->result = DID_ERROR << 16; + if (!hostdata->connected) + NCR5380_select(instance, cmd); + if (hostdata->connected != cmd) { + complete_cmd(instance, cmd); + result = FAILED; + goto out; } } - /* - * Case 3 : If any commands are connected, we're going to fail the abort - * and let the high level SCSI driver retry at a later time or - * issue a reset. - * - * Timeouts, and therefore aborted commands, will be highly unlikely - * and handling them cleanly in this situation would make the common - * case of noresets less efficient, and would pollute our code. So, - * we fail. - */ + if (hostdata->connected == cmd) { + dsprintk(NDEBUG_ABORT, instance, "abort: cmd %p is connected\n", cmd); + hostdata->connected = NULL; + if (do_abort(instance)) { + set_host_byte(cmd, DID_ERROR); + complete_cmd(instance, cmd); + result = FAILED; + goto out; + } + set_host_byte(cmd, DID_ABORT); +#ifdef REAL_DMA + hostdata->dma_len = 0; +#endif + if (cmd->cmnd[0] == REQUEST_SENSE) + complete_cmd(instance, cmd); + else { + struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd); - if (hostdata->connected) { - local_irq_restore(flags); - dprintk(NDEBUG_ABORT, "scsi%d: abort failed, command connected.\n", HOSTNO); - return FAILED; + /* Perform autosense for this command */ + list_add(&ncmd->list, &hostdata->autosense); + } } - /* - * Case 4: If the command is currently disconnected from the bus, and - * there are no connected commands, we reconnect the I_T_L or - * I_T_L_Q nexus associated with it, go into message out, and send - * an abort message. - * - * This case is especially ugly. In order to reestablish the nexus, we - * need to call NCR5380_select(). The easiest way to implement this - * function was to abort if the bus was busy, and let the interrupt - * handler triggered on the SEL for reselect take care of lost arbitrations - * where necessary, meaning interrupts need to be enabled. - * - * When interrupts are enabled, the queues may change - so we - * can't remove it from the disconnected queue before selecting it - * because that could cause a failure in hashing the nexus if that - * device reselected. - * - * Since the queues may change, we can't use the pointers from when we - * first locate it. - * - * So, we must first locate the command, and if NCR5380_select() - * succeeds, then issue the abort, relocate the command and remove - * it from the disconnected queue. - */ - - for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp; - tmp = NEXT(tmp)) { - if (cmd == tmp) { - local_irq_restore(flags); - dprintk(NDEBUG_ABORT, "scsi%d: aborting disconnected command.\n", HOSTNO); - - if (NCR5380_select(instance, cmd)) - return FAILED; - - dprintk(NDEBUG_ABORT, "scsi%d: nexus reestablished.\n", HOSTNO); - - do_abort(instance); - - local_irq_save(flags); - for (prev = (struct scsi_cmnd **)&(hostdata->disconnected_queue), - tmp = (struct scsi_cmnd *)hostdata->disconnected_queue; - tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp)) { - if (cmd == tmp) { - REMOVE(5, *prev, tmp, NEXT(tmp)); - *prev = NEXT(tmp); - SET_NEXT(tmp, NULL); - tmp->result = DID_ABORT << 16; - /* We must unlock the tag/LUN immediately here, since the - * target goes to BUS FREE and doesn't send us another - * message (COMMAND_COMPLETE or the like) - */ -#ifdef SUPPORT_TAGS - cmd_free_tag(tmp); -#else - hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun); -#endif - maybe_release_dma_irq(instance); - local_irq_restore(flags); - tmp->scsi_done(tmp); - return SUCCESS; - } - } + if (list_find_cmd(&hostdata->autosense, cmd)) { + dsprintk(NDEBUG_ABORT, instance, + "abort: found %p on sense queue\n", cmd); + spin_unlock_irqrestore(&hostdata->lock, flags); + queue_work(hostdata->work_q, &hostdata->main_task); + msleep(1000); + spin_lock_irqsave(&hostdata->lock, flags); + if (list_del_cmd(&hostdata->autosense, cmd)) { + dsprintk(NDEBUG_ABORT, instance, + "abort: removed %p from sense queue\n", cmd); + set_host_byte(cmd, DID_ABORT); + complete_cmd(instance, cmd); + goto out; } } - /* Maybe it is sufficient just to release the ST-DMA lock... (if - * possible at all) At least, we should check if the lock could be - * released after the abort, in case it is kept due to some bug. - */ - maybe_release_dma_irq(instance); - local_irq_restore(flags); + if (hostdata->connected == cmd) { + dsprintk(NDEBUG_ABORT, instance, "abort: cmd %p is connected\n", cmd); + hostdata->connected = NULL; + if (do_abort(instance)) { + set_host_byte(cmd, DID_ERROR); + complete_cmd(instance, cmd); + result = FAILED; + goto out; + } + set_host_byte(cmd, DID_ABORT); +#ifdef REAL_DMA + hostdata->dma_len = 0; +#endif + complete_cmd(instance, cmd); + } - /* - * Case 5 : If we reached this point, the command was not found in any of - * the queues. - * - * We probably reached this point because of an unlikely race condition - * between the command completing successfully and the abortion code, - * so we won't panic, but we will notify the user in case something really - * broke. - */ +out: + if (result == FAILED) + dsprintk(NDEBUG_ABORT, instance, "abort: failed to abort %p\n", cmd); + else + dsprintk(NDEBUG_ABORT, instance, "abort: successfully aborted %p\n", cmd); - printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO); + queue_work(hostdata->work_q, &hostdata->main_task); + maybe_release_dma_irq(instance); + spin_unlock_irqrestore(&hostdata->lock, flags); - return FAILED; + return result; } -/* - * Function : int NCR5380_reset (struct scsi_cmnd *cmd) - * - * Purpose : reset the SCSI bus. - * - * Returns : SUCCESS or FAILURE +/** + * NCR5380_bus_reset - reset the SCSI bus + * @cmd: SCSI command undergoing EH * + * Returns SUCCESS */ static int NCR5380_bus_reset(struct scsi_cmnd *cmd) @@ -2876,23 +2623,22 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd) struct NCR5380_hostdata *hostdata = shost_priv(instance); int i; unsigned long flags; + struct NCR5380_cmd *ncmd; - NCR5380_print_status(instance); + spin_lock_irqsave(&hostdata->lock, flags); + +#if (NDEBUG & NDEBUG_ANY) + scmd_printk(KERN_INFO, cmd, __func__); +#endif + NCR5380_dprint(NDEBUG_ANY, instance); + NCR5380_dprint_phase(NDEBUG_ANY, instance); + + do_reset(instance); - /* get in phase */ - NCR5380_write(TARGET_COMMAND_REG, - PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG))); - /* assert RST */ - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST); - udelay(40); /* reset NCR registers */ - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); NCR5380_write(MODE_REG, MR_BASE); NCR5380_write(TARGET_COMMAND_REG, 0); NCR5380_write(SELECT_ENABLE_REG, 0); - /* ++roman: reset interrupt condition! otherwise no interrupts don't get - * through anymore ... */ - (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG); /* After the reset, there are no more connected or disconnected commands * and no busy units; so clear the low-level status here to avoid @@ -2900,17 +2646,34 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd) * commands! */ - if (hostdata->issue_queue) - dprintk(NDEBUG_ABORT, "scsi%d: reset aborted issued command(s)\n", H_NO(cmd)); - if (hostdata->connected) - dprintk(NDEBUG_ABORT, "scsi%d: reset aborted a connected command\n", H_NO(cmd)); - if (hostdata->disconnected_queue) - dprintk(NDEBUG_ABORT, "scsi%d: reset aborted disconnected command(s)\n", H_NO(cmd)); + hostdata->selecting = NULL; + + list_for_each_entry(ncmd, &hostdata->disconnected, list) { + struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd); + + set_host_byte(cmd, DID_RESET); + cmd->scsi_done(cmd); + } + + list_for_each_entry(ncmd, &hostdata->autosense, list) { + struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd); + + set_host_byte(cmd, DID_RESET); + cmd->scsi_done(cmd); + } + + if (hostdata->connected) { + set_host_byte(hostdata->connected, DID_RESET); + complete_cmd(instance, hostdata->connected); + hostdata->connected = NULL; + } + + if (hostdata->sensing) { + set_host_byte(hostdata->connected, DID_RESET); + complete_cmd(instance, hostdata->sensing); + hostdata->sensing = NULL; + } - local_irq_save(flags); - hostdata->issue_queue = NULL; - hostdata->connected = NULL; - hostdata->disconnected_queue = NULL; #ifdef SUPPORT_TAGS free_all_tags(hostdata); #endif @@ -2920,8 +2683,9 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd) hostdata->dma_len = 0; #endif + queue_work(hostdata->work_q, &hostdata->main_task); maybe_release_dma_irq(instance); - local_irq_restore(flags); + spin_unlock_irqrestore(&hostdata->lock, flags); return SUCCESS; } diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c index 5ede3daa93dc..78d1b2963f2c 100644 --- a/drivers/scsi/atari_scsi.c +++ b/drivers/scsi/atari_scsi.c @@ -66,7 +66,6 @@ #include <linux/module.h> #include <linux/types.h> -#include <linux/delay.h> #include <linux/blkdev.h> #include <linux/interrupt.h> #include <linux/init.h> @@ -98,7 +97,6 @@ #define NCR5380_queue_command atari_scsi_queue_command #define NCR5380_abort atari_scsi_abort -#define NCR5380_show_info atari_scsi_show_info #define NCR5380_info atari_scsi_info #define NCR5380_dma_read_setup(instance, data, count) \ @@ -161,23 +159,10 @@ static inline unsigned long SCSI_DMA_GETADR(void) return adr; } -#define HOSTDATA_DMALEN (((struct NCR5380_hostdata *) \ - (atari_scsi_host->hostdata))->dma_len) - -/* Time (in jiffies) to wait after a reset; the SCSI standard calls for 250ms, - * we usually do 0.5s to be on the safe side. But Toshiba CD-ROMs once more - * need ten times the standard value... */ -#ifndef CONFIG_ATARI_SCSI_TOSHIBA_DELAY -#define AFTER_RESET_DELAY (HZ/2) -#else -#define AFTER_RESET_DELAY (5*HZ/2) -#endif - #ifdef REAL_DMA static void atari_scsi_fetch_restbytes(void); #endif -static struct Scsi_Host *atari_scsi_host; static unsigned char (*atari_scsi_reg_read)(unsigned char reg); static void (*atari_scsi_reg_write)(unsigned char reg, unsigned char value); @@ -208,12 +193,12 @@ static int setup_cmd_per_lun = -1; module_param(setup_cmd_per_lun, int, 0); static int setup_sg_tablesize = -1; module_param(setup_sg_tablesize, int, 0); -#ifdef SUPPORT_TAGS static int setup_use_tagged_queuing = -1; module_param(setup_use_tagged_queuing, int, 0); -#endif static int setup_hostid = -1; module_param(setup_hostid, int, 0); +static int setup_toshiba_delay = -1; +module_param(setup_toshiba_delay, int, 0); #if defined(REAL_DMA) @@ -273,15 +258,17 @@ static void scsi_dma_buserr(int irq, void *dummy) #endif -static irqreturn_t scsi_tt_intr(int irq, void *dummy) +static irqreturn_t scsi_tt_intr(int irq, void *dev) { #ifdef REAL_DMA + struct Scsi_Host *instance = dev; + struct NCR5380_hostdata *hostdata = shost_priv(instance); int dma_stat; dma_stat = tt_scsi_dma.dma_ctrl; - dprintk(NDEBUG_INTR, "scsi%d: NCR5380 interrupt, DMA status = %02x\n", - atari_scsi_host->host_no, dma_stat & 0xff); + dsprintk(NDEBUG_INTR, instance, "NCR5380 interrupt, DMA status = %02x\n", + dma_stat & 0xff); /* Look if it was the DMA that has interrupted: First possibility * is that a bus error occurred... @@ -304,7 +291,8 @@ static irqreturn_t scsi_tt_intr(int irq, void *dummy) * data reg! */ if ((dma_stat & 0x02) && !(dma_stat & 0x40)) { - atari_dma_residual = HOSTDATA_DMALEN - (SCSI_DMA_READ_P(dma_addr) - atari_dma_startaddr); + atari_dma_residual = hostdata->dma_len - + (SCSI_DMA_READ_P(dma_addr) - atari_dma_startaddr); dprintk(NDEBUG_DMA, "SCSI DMA: There are %ld residual bytes.\n", atari_dma_residual); @@ -356,15 +344,17 @@ static irqreturn_t scsi_tt_intr(int irq, void *dummy) #endif /* REAL_DMA */ - NCR5380_intr(irq, dummy); + NCR5380_intr(irq, dev); return IRQ_HANDLED; } -static irqreturn_t scsi_falcon_intr(int irq, void *dummy) +static irqreturn_t scsi_falcon_intr(int irq, void *dev) { #ifdef REAL_DMA + struct Scsi_Host *instance = dev; + struct NCR5380_hostdata *hostdata = shost_priv(instance); int dma_stat; /* Turn off DMA and select sector counter register before @@ -399,7 +389,7 @@ static irqreturn_t scsi_falcon_intr(int irq, void *dummy) printk(KERN_ERR "SCSI DMA error: %ld bytes lost in " "ST-DMA fifo\n", transferred & 15); - atari_dma_residual = HOSTDATA_DMALEN - transferred; + atari_dma_residual = hostdata->dma_len - transferred; dprintk(NDEBUG_DMA, "SCSI DMA: There are %ld residual bytes.\n", atari_dma_residual); } else @@ -411,13 +401,14 @@ static irqreturn_t scsi_falcon_intr(int irq, void *dummy) * data to the original destination address. */ memcpy(atari_dma_orig_addr, phys_to_virt(atari_dma_startaddr), - HOSTDATA_DMALEN - atari_dma_residual); + hostdata->dma_len - atari_dma_residual); atari_dma_orig_addr = NULL; } #endif /* REAL_DMA */ - NCR5380_intr(irq, dummy); + NCR5380_intr(irq, dev); + return IRQ_HANDLED; } @@ -488,7 +479,7 @@ static int __init atari_scsi_setup(char *str) * Defaults depend on TT or Falcon, determined at run time. * Negative values mean don't change. */ - int ints[6]; + int ints[8]; get_options(str, ARRAY_SIZE(ints), ints); @@ -504,10 +495,11 @@ static int __init atari_scsi_setup(char *str) setup_sg_tablesize = ints[3]; if (ints[0] >= 4) setup_hostid = ints[4]; -#ifdef SUPPORT_TAGS if (ints[0] >= 5) setup_use_tagged_queuing = ints[5]; -#endif + /* ints[6] (use_pdma) is ignored */ + if (ints[0] >= 7) + setup_toshiba_delay = ints[7]; return 1; } @@ -516,38 +508,6 @@ __setup("atascsi=", atari_scsi_setup); #endif /* !MODULE */ -#ifdef CONFIG_ATARI_SCSI_RESET_BOOT -static void __init atari_scsi_reset_boot(void) -{ - unsigned long end; - - /* - * Do a SCSI reset to clean up the bus during initialization. No messing - * with the queues, interrupts, or locks necessary here. - */ - - printk("Atari SCSI: resetting the SCSI bus..."); - - /* get in phase */ - NCR5380_write(TARGET_COMMAND_REG, - PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG))); - - /* assert RST */ - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST); - /* The min. reset hold time is 25us, so 40us should be enough */ - udelay(50); - /* reset RST and interrupt */ - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - NCR5380_read(RESET_PARITY_INTERRUPT_REG); - - end = jiffies + AFTER_RESET_DELAY; - while (time_before(jiffies, end)) - barrier(); - - printk(" done\n"); -} -#endif - #if defined(REAL_DMA) static unsigned long atari_scsi_dma_setup(struct Scsi_Host *instance, @@ -815,14 +775,14 @@ static int atari_scsi_bus_reset(struct scsi_cmnd *cmd) static struct scsi_host_template atari_scsi_template = { .module = THIS_MODULE, .proc_name = DRV_MODULE_NAME, - .show_info = atari_scsi_show_info, .name = "Atari native SCSI", .info = atari_scsi_info, .queuecommand = atari_scsi_queue_command, .eh_abort_handler = atari_scsi_abort, .eh_bus_reset_handler = atari_scsi_bus_reset, .this_id = 7, - .use_clustering = DISABLE_CLUSTERING + .use_clustering = DISABLE_CLUSTERING, + .cmd_size = NCR5380_CMD_SIZE, }; static int __init atari_scsi_probe(struct platform_device *pdev) @@ -880,7 +840,7 @@ static int __init atari_scsi_probe(struct platform_device *pdev) } else { /* Test if a host id is set in the NVRam */ if (ATARIHW_PRESENT(TT_CLK) && nvram_check_checksum()) { - unsigned char b = nvram_read_byte(14); + unsigned char b = nvram_read_byte(16); /* Arbitration enabled? (for TOS) * If yes, use configured host ID @@ -915,21 +875,18 @@ static int __init atari_scsi_probe(struct platform_device *pdev) error = -ENOMEM; goto fail_alloc; } - atari_scsi_host = instance; - -#ifdef CONFIG_ATARI_SCSI_RESET_BOOT - atari_scsi_reset_boot(); -#endif instance->irq = irq->start; host_flags |= IS_A_TT() ? 0 : FLAG_LATE_DMA_SETUP; - #ifdef SUPPORT_TAGS host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0; #endif + host_flags |= setup_toshiba_delay > 0 ? FLAG_TOSHIBA_DELAY : 0; - NCR5380_init(instance, host_flags); + error = NCR5380_init(instance, host_flags); + if (error) + goto fail_init; if (IS_A_TT()) { error = request_irq(instance->irq, scsi_tt_intr, 0, @@ -975,6 +932,8 @@ static int __init atari_scsi_probe(struct platform_device *pdev) #endif } + NCR5380_maybe_reset_bus(instance); + error = scsi_add_host(instance, NULL); if (error) goto fail_host; @@ -989,6 +948,7 @@ fail_host: free_irq(instance->irq, instance); fail_irq: NCR5380_exit(instance); +fail_init: scsi_host_put(instance); fail_alloc: if (atari_dma_buffer) diff --git a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c index 0e2bee937fe8..e22a268fd311 100644 --- a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c +++ b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c @@ -57,7 +57,7 @@ MODULE_PARM_DESC(cxgb3i_snd_win, "TCP send window in bytes (default=128KB)"); static int cxgb3i_rx_credit_thres = 10 * 1024; module_param(cxgb3i_rx_credit_thres, int, 0644); -MODULE_PARM_DESC(rx_credit_thres, +MODULE_PARM_DESC(cxgb3i_rx_credit_thres, "RX credits return threshold in bytes (default=10KB)"); static unsigned int cxgb3i_max_connect = 8 * 1024; diff --git a/drivers/scsi/dmx3191d.c b/drivers/scsi/dmx3191d.c index 3e088125a8be..6c14e68b9e1a 100644 --- a/drivers/scsi/dmx3191d.c +++ b/drivers/scsi/dmx3191d.c @@ -36,17 +36,10 @@ #define DONT_USE_INTR -#define NCR5380_read(reg) inb(port + reg) -#define NCR5380_write(reg, value) outb(value, port + reg) +#define NCR5380_read(reg) inb(instance->io_port + reg) +#define NCR5380_write(reg, value) outb(value, instance->io_port + reg) #define NCR5380_implementation_fields /* none */ -#define NCR5380_local_declare() unsigned int port -#define NCR5380_setup(instance) port = instance->io_port - -/* - * Includes needed for NCR5380.[ch] (XXX: Move them to NCR5380.h) - */ -#include <linux/delay.h> #include "NCR5380.h" #include "NCR5380.c" @@ -56,6 +49,7 @@ static struct scsi_host_template dmx3191d_driver_template = { + .module = THIS_MODULE, .proc_name = DMX3191D_DRIVER_NAME, .name = "Domex DMX3191D", .info = NCR5380_info, @@ -67,6 +61,8 @@ static struct scsi_host_template dmx3191d_driver_template = { .sg_tablesize = SG_ALL, .cmd_per_lun = 2, .use_clustering = DISABLE_CLUSTERING, + .cmd_size = NCR5380_CMD_SIZE, + .max_sectors = 128, }; static int dmx3191d_probe_one(struct pci_dev *pdev, @@ -97,17 +93,25 @@ static int dmx3191d_probe_one(struct pci_dev *pdev, */ shost->irq = NO_IRQ; - NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E); + error = NCR5380_init(shost, FLAG_NO_PSEUDO_DMA); + if (error) + goto out_host_put; + + NCR5380_maybe_reset_bus(shost); pci_set_drvdata(pdev, shost); error = scsi_add_host(shost, &pdev->dev); if (error) - goto out_release_region; + goto out_exit; scsi_scan_host(shost); return 0; +out_exit: + NCR5380_exit(shost); +out_host_put: + scsi_host_put(shost); out_release_region: release_region(io, DMX3191D_REGION_LEN); out_disable_device: @@ -119,15 +123,14 @@ static int dmx3191d_probe_one(struct pci_dev *pdev, static void dmx3191d_remove_one(struct pci_dev *pdev) { struct Scsi_Host *shost = pci_get_drvdata(pdev); + unsigned long io = shost->io_port; scsi_remove_host(shost); NCR5380_exit(shost); - - release_region(shost->io_port, DMX3191D_REGION_LEN); - pci_disable_device(pdev); - scsi_host_put(shost); + release_region(io, DMX3191D_REGION_LEN); + pci_disable_device(pdev); } static struct pci_device_id dmx3191d_pci_tbl[] = { diff --git a/drivers/scsi/dtc.c b/drivers/scsi/dtc.c index 4c74c7ba2dff..6c736b071cf4 100644 --- a/drivers/scsi/dtc.c +++ b/drivers/scsi/dtc.c @@ -1,9 +1,5 @@ - #define PSEUDO_DMA #define DONT_USE_INTR -#define UNSAFE /* Leave interrupts enabled during pseudo-dma I/O */ -#define DMA_WORKS_RIGHT - /* * DTC 3180/3280 driver, by @@ -50,15 +46,13 @@ #include <linux/module.h> -#include <linux/signal.h> #include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/stat.h> #include <linux/string.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> #include <scsi/scsi_host.h> + #include "dtc.h" #define AUTOPROBE_IRQ #include "NCR5380.h" @@ -150,7 +144,7 @@ static const struct signature { static int __init dtc_setup(char *str) { - static int commandline_current = 0; + static int commandline_current; int i; int ints[10]; @@ -188,7 +182,7 @@ __setup("dtc=", dtc_setup); static int __init dtc_detect(struct scsi_host_template * tpnt) { - static int current_override = 0, current_base = 0; + static int current_override, current_base; struct Scsi_Host *instance; unsigned int addr; void __iomem *base; @@ -205,9 +199,8 @@ static int __init dtc_detect(struct scsi_host_template * tpnt) addr = 0; } else for (; !addr && (current_base < NO_BASES); ++current_base) { -#if (DTCDEBUG & DTCDEBUG_INIT) - printk(KERN_DEBUG "scsi-dtc : probing address %08x\n", bases[current_base].address); -#endif + dprintk(NDEBUG_INIT, "dtc: probing address 0x%08x\n", + (unsigned int)bases[current_base].address); if (bases[current_base].noauto) continue; base = ioremap(bases[current_base].address, 0x2000); @@ -216,18 +209,14 @@ static int __init dtc_detect(struct scsi_host_template * tpnt) for (sig = 0; sig < NO_SIGNATURES; ++sig) { if (check_signature(base + signatures[sig].offset, signatures[sig].string, strlen(signatures[sig].string))) { addr = bases[current_base].address; -#if (DTCDEBUG & DTCDEBUG_INIT) - printk(KERN_DEBUG "scsi-dtc : detected board.\n"); -#endif + dprintk(NDEBUG_INIT, "dtc: detected board\n"); goto found; } } iounmap(base); } -#if defined(DTCDEBUG) && (DTCDEBUG & DTCDEBUG_INIT) - printk(KERN_DEBUG "scsi-dtc : base = %08x\n", addr); -#endif + dprintk(NDEBUG_INIT, "dtc: addr = 0x%08x\n", addr); if (!addr) break; @@ -235,12 +224,15 @@ static int __init dtc_detect(struct scsi_host_template * tpnt) found: instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata)); if (instance == NULL) - break; + goto out_unmap; instance->base = addr; ((struct NCR5380_hostdata *)(instance)->hostdata)->base = base; - NCR5380_init(instance, 0); + if (NCR5380_init(instance, FLAG_NO_DMA_FIXUP)) + goto out_unregister; + + NCR5380_maybe_reset_bus(instance); NCR5380_write(DTC_CONTROL_REG, CSR_5380_INTR); /* Enable int's */ if (overrides[current_override].irq != IRQ_AUTO) @@ -271,14 +263,19 @@ found: printk(KERN_WARNING "scsi%d : interrupts not used. Might as well not jumper it.\n", instance->host_no); instance->irq = NO_IRQ; #endif -#if defined(DTCDEBUG) && (DTCDEBUG & DTCDEBUG_INIT) - printk("scsi%d : irq = %d\n", instance->host_no, instance->irq); -#endif + dprintk(NDEBUG_INIT, "scsi%d : irq = %d\n", + instance->host_no, instance->irq); ++current_override; ++count; } return count; + +out_unregister: + scsi_unregister(instance); +out_unmap: + iounmap(base); + return count; } /* @@ -331,12 +328,8 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, unsigned char *d = dst; int i; /* For counting time spent in the poll-loop */ struct NCR5380_hostdata *hostdata = shost_priv(instance); - NCR5380_local_declare(); - NCR5380_setup(instance); i = 0; - NCR5380_read(RESET_PARITY_INTERRUPT_REG); - NCR5380_write(MODE_REG, MR_ENABLE_EOP_INTR | MR_DMA_MODE); if (instance->irq == NO_IRQ) NCR5380_write(DTC_CONTROL_REG, CSR_DIR_READ); else @@ -348,7 +341,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, while (NCR5380_read(DTC_CONTROL_REG) & CSR_HOST_BUF_NOT_RDY) ++i; rtrc(3); - memcpy_fromio(d, base + DTC_DATA_BUF, 128); + memcpy_fromio(d, hostdata->base + DTC_DATA_BUF, 128); d += 128; len -= 128; rtrc(7); @@ -358,9 +351,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, rtrc(4); while (!(NCR5380_read(DTC_CONTROL_REG) & D_CR_ACCESS)) ++i; - NCR5380_write(MODE_REG, 0); /* Clear the operating mode */ rtrc(0); - NCR5380_read(RESET_PARITY_INTERRUPT_REG); if (i > hostdata->spin_max_r) hostdata->spin_max_r = i; return (0); @@ -383,12 +374,7 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, { int i; struct NCR5380_hostdata *hostdata = shost_priv(instance); - NCR5380_local_declare(); - NCR5380_setup(instance); - NCR5380_read(RESET_PARITY_INTERRUPT_REG); - NCR5380_write(MODE_REG, MR_ENABLE_EOP_INTR | MR_DMA_MODE); - /* set direction (write) */ if (instance->irq == NO_IRQ) NCR5380_write(DTC_CONTROL_REG, 0); else @@ -400,7 +386,7 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, while (NCR5380_read(DTC_CONTROL_REG) & CSR_HOST_BUF_NOT_RDY) ++i; rtrc(3); - memcpy_toio(base + DTC_DATA_BUF, src, 128); + memcpy_toio(hostdata->base + DTC_DATA_BUF, src, 128); src += 128; len -= 128; } @@ -413,47 +399,60 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, ++i; rtrc(7); /* Check for parity error here. fixme. */ - NCR5380_write(MODE_REG, 0); /* Clear the operating mode */ rtrc(0); if (i > hostdata->spin_max_w) hostdata->spin_max_w = i; return (0); } +static int dtc_dma_xfer_len(struct scsi_cmnd *cmd) +{ + int transfersize = cmd->transfersize; + + /* Limit transfers to 32K, for xx400 & xx406 + * pseudoDMA that transfers in 128 bytes blocks. + */ + if (transfersize > 32 * 1024 && cmd->SCp.this_residual && + !(cmd->SCp.this_residual % transfersize)) + transfersize = 32 * 1024; + + return transfersize; +} + MODULE_LICENSE("GPL"); #include "NCR5380.c" static int dtc_release(struct Scsi_Host *shost) { - NCR5380_local_declare(); - NCR5380_setup(shost); + struct NCR5380_hostdata *hostdata = shost_priv(shost); + if (shost->irq != NO_IRQ) free_irq(shost->irq, shost); NCR5380_exit(shost); - if (shost->io_port && shost->n_io_port) - release_region(shost->io_port, shost->n_io_port); scsi_unregister(shost); - iounmap(base); + iounmap(hostdata->base); return 0; } static struct scsi_host_template driver_template = { - .name = "DTC 3180/3280 ", - .detect = dtc_detect, - .release = dtc_release, - .proc_name = "dtc3x80", - .show_info = dtc_show_info, - .write_info = dtc_write_info, - .info = dtc_info, - .queuecommand = dtc_queue_command, - .eh_abort_handler = dtc_abort, - .eh_bus_reset_handler = dtc_bus_reset, - .bios_param = dtc_biosparam, - .can_queue = CAN_QUEUE, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = CMD_PER_LUN, - .use_clustering = DISABLE_CLUSTERING, + .name = "DTC 3180/3280", + .detect = dtc_detect, + .release = dtc_release, + .proc_name = "dtc3x80", + .show_info = dtc_show_info, + .write_info = dtc_write_info, + .info = dtc_info, + .queuecommand = dtc_queue_command, + .eh_abort_handler = dtc_abort, + .eh_bus_reset_handler = dtc_bus_reset, + .bios_param = dtc_biosparam, + .can_queue = 32, + .this_id = 7, + .sg_tablesize = SG_ALL, + .cmd_per_lun = 2, + .use_clustering = DISABLE_CLUSTERING, + .cmd_size = NCR5380_CMD_SIZE, + .max_sectors = 128, }; #include "scsi_module.c" diff --git a/drivers/scsi/dtc.h b/drivers/scsi/dtc.h index 78a2332e9064..56732cba8aba 100644 --- a/drivers/scsi/dtc.h +++ b/drivers/scsi/dtc.h @@ -10,54 +10,17 @@ #ifndef DTC3280_H #define DTC3280_H -#define DTCDEBUG 0 -#define DTCDEBUG_INIT 0x1 -#define DTCDEBUG_TRANSFER 0x2 - -#ifndef CMD_PER_LUN -#define CMD_PER_LUN 2 -#endif - -#ifndef CAN_QUEUE -#define CAN_QUEUE 32 -#endif - #define NCR5380_implementation_fields \ void __iomem *base -#define NCR5380_local_declare() \ - void __iomem *base - -#define NCR5380_setup(instance) \ - base = ((struct NCR5380_hostdata *)(instance)->hostdata)->base +#define DTC_address(reg) \ + (((struct NCR5380_hostdata *)shost_priv(instance))->base + DTC_5380_OFFSET + reg) -#define DTC_address(reg) (base + DTC_5380_OFFSET + reg) - -#define dbNCR5380_read(reg) \ - (rval=readb(DTC_address(reg)), \ - (((unsigned char) printk("DTC : read register %d at addr %p is: %02x\n"\ - , (reg), DTC_address(reg), rval)), rval ) ) - -#define dbNCR5380_write(reg, value) do { \ - printk("DTC : write %02x to register %d at address %p\n", \ - (value), (reg), DTC_address(reg)); \ - writeb(value, DTC_address(reg));} while(0) - - -#if !(DTCDEBUG & DTCDEBUG_TRANSFER) #define NCR5380_read(reg) (readb(DTC_address(reg))) #define NCR5380_write(reg, value) (writeb(value, DTC_address(reg))) -#else -#define NCR5380_read(reg) (readb(DTC_address(reg))) -#define xNCR5380_read(reg) \ - (((unsigned char) printk("DTC : read register %d at address %p\n"\ - , (reg), DTC_address(reg))), readb(DTC_address(reg))) -#define NCR5380_write(reg, value) do { \ - printk("DTC : write %02x to register %d at address %p\n", \ - (value), (reg), DTC_address(reg)); \ - writeb(value, DTC_address(reg));} while(0) -#endif +#define NCR5380_dma_xfer_len(instance, cmd, phase) \ + dtc_dma_xfer_len(cmd) #define NCR5380_intr dtc_intr #define NCR5380_queue_command dtc_queue_command diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c index f8d2478b11cc..90091e693020 100644 --- a/drivers/scsi/g_NCR5380.c +++ b/drivers/scsi/g_NCR5380.c @@ -56,40 +56,31 @@ * */ -/* settings for DTC3181E card with only Mustek scanner attached */ -#define USLEEP_POLL msecs_to_jiffies(10) -#define USLEEP_SLEEP msecs_to_jiffies(200) -#define USLEEP_WAITLONG msecs_to_jiffies(5000) - #define AUTOPROBE_IRQ #ifdef CONFIG_SCSI_GENERIC_NCR53C400 -#define NCR53C400_PSEUDO_DMA 1 #define PSEUDO_DMA -#define NCR53C400 #endif #include <asm/io.h> -#include <linux/signal.h> #include <linux/blkdev.h> +#include <linux/module.h> #include <scsi/scsi_host.h> #include "g_NCR5380.h" #include "NCR5380.h" -#include <linux/stat.h> #include <linux/init.h> #include <linux/ioport.h> #include <linux/isapnp.h> -#include <linux/delay.h> #include <linux/interrupt.h> -#define NCR_NOT_SET 0 -static int ncr_irq = NCR_NOT_SET; -static int ncr_dma = NCR_NOT_SET; -static int ncr_addr = NCR_NOT_SET; -static int ncr_5380 = NCR_NOT_SET; -static int ncr_53c400 = NCR_NOT_SET; -static int ncr_53c400a = NCR_NOT_SET; -static int dtc_3181e = NCR_NOT_SET; +static int ncr_irq; +static int ncr_dma; +static int ncr_addr; +static int ncr_5380; +static int ncr_53c400; +static int ncr_53c400a; +static int dtc_3181e; +static int hp_c2502; static struct override { NCR5380_map_type NCR5380_map_name; @@ -121,7 +112,7 @@ static struct override { static void __init internal_setup(int board, char *str, int *ints) { - static int commandline_current = 0; + static int commandline_current; switch (board) { case BOARD_NCR5380: if (ints[0] != 2 && ints[0] != 3) { @@ -235,6 +226,30 @@ static int __init do_DTC3181E_setup(char *str) #endif +#ifndef SCSI_G_NCR5380_MEM +/* + * Configure I/O address of 53C400A or DTC436 by writing magic numbers + * to ports 0x779 and 0x379. + */ +static void magic_configure(int idx, u8 irq, u8 magic[]) +{ + u8 cfg = 0; + + outb(magic[0], 0x779); + outb(magic[1], 0x379); + outb(magic[2], 0x379); + outb(magic[3], 0x379); + outb(magic[4], 0x379); + + /* allowed IRQs for HP C2502 */ + if (irq != 2 && irq != 3 && irq != 4 && irq != 5 && irq != 7) + irq = 0; + if (idx >= 0 && idx <= 7) + cfg = 0x80 | idx | (irq << 4); + outb(cfg, 0x379); +} +#endif + /** * generic_NCR5380_detect - look for NCR5380 controllers * @tpnt: the scsi template @@ -243,19 +258,18 @@ static int __init do_DTC3181E_setup(char *str) * and DTC436(ISAPnP) controllers. If overrides have been set we use * them. * - * The caller supplied NCR5380_init function is invoked from here, before - * the interrupt line is taken. - * * Locks: none */ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) { - static int current_override = 0; + static int current_override; int count; unsigned int *ports; + u8 *magic = NULL; #ifndef SCSI_G_NCR5380_MEM int i; + int port_idx = -1; unsigned long region_size = 16; #endif static unsigned int __initdata ncr_53c400a_ports[] = { @@ -264,27 +278,36 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) static unsigned int __initdata dtc_3181e_ports[] = { 0x220, 0x240, 0x280, 0x2a0, 0x2c0, 0x300, 0x320, 0x340, 0 }; - int flags = 0; + static u8 ncr_53c400a_magic[] __initdata = { /* 53C400A & DTC436 */ + 0x59, 0xb9, 0xc5, 0xae, 0xa6 + }; + static u8 hp_c2502_magic[] __initdata = { /* HP C2502 */ + 0x0f, 0x22, 0xf0, 0x20, 0x80 + }; + int flags; struct Scsi_Host *instance; + struct NCR5380_hostdata *hostdata; #ifdef SCSI_G_NCR5380_MEM unsigned long base; void __iomem *iomem; #endif - if (ncr_irq != NCR_NOT_SET) + if (ncr_irq) overrides[0].irq = ncr_irq; - if (ncr_dma != NCR_NOT_SET) + if (ncr_dma) overrides[0].dma = ncr_dma; - if (ncr_addr != NCR_NOT_SET) + if (ncr_addr) overrides[0].NCR5380_map_name = (NCR5380_map_type) ncr_addr; - if (ncr_5380 != NCR_NOT_SET) + if (ncr_5380) overrides[0].board = BOARD_NCR5380; - else if (ncr_53c400 != NCR_NOT_SET) + else if (ncr_53c400) overrides[0].board = BOARD_NCR53C400; - else if (ncr_53c400a != NCR_NOT_SET) + else if (ncr_53c400a) overrides[0].board = BOARD_NCR53C400A; - else if (dtc_3181e != NCR_NOT_SET) + else if (dtc_3181e) overrides[0].board = BOARD_DTC3181E; + else if (hp_c2502) + overrides[0].board = BOARD_HP_C2502; #ifndef SCSI_G_NCR5380_MEM if (!current_override && isapnp_present()) { struct pnp_dev *dev = NULL; @@ -318,41 +341,45 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) } } #endif - tpnt->proc_name = "g_NCR5380"; for (count = 0; current_override < NO_OVERRIDES; ++current_override) { if (!(overrides[current_override].NCR5380_map_name)) continue; ports = NULL; + flags = 0; switch (overrides[current_override].board) { case BOARD_NCR5380: flags = FLAG_NO_PSEUDO_DMA; break; case BOARD_NCR53C400: - flags = FLAG_NCR53C400; +#ifdef PSEUDO_DMA + flags = FLAG_NO_DMA_FIXUP; +#endif break; case BOARD_NCR53C400A: - flags = FLAG_NO_PSEUDO_DMA; + flags = FLAG_NO_DMA_FIXUP; + ports = ncr_53c400a_ports; + magic = ncr_53c400a_magic; + break; + case BOARD_HP_C2502: + flags = FLAG_NO_DMA_FIXUP; ports = ncr_53c400a_ports; + magic = hp_c2502_magic; break; case BOARD_DTC3181E: - flags = FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E; + flags = FLAG_NO_DMA_FIXUP; ports = dtc_3181e_ports; + magic = ncr_53c400a_magic; break; } #ifndef SCSI_G_NCR5380_MEM - if (ports) { + if (ports && magic) { /* wakeup sequence for the NCR53C400A and DTC3181E */ /* Disable the adapter and look for a free io port */ - outb(0x59, 0x779); - outb(0xb9, 0x379); - outb(0xc5, 0x379); - outb(0xae, 0x379); - outb(0xa6, 0x379); - outb(0x00, 0x379); + magic_configure(-1, 0, magic); if (overrides[current_override].NCR5380_map_name != PORT_AUTO) for (i = 0; ports[i]; i++) { @@ -371,17 +398,12 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) } if (ports[i]) { /* At this point we have our region reserved */ - outb(0x59, 0x779); - outb(0xb9, 0x379); - outb(0xc5, 0x379); - outb(0xae, 0x379); - outb(0xa6, 0x379); - outb(0x80 | i, 0x379); /* set io port to be used */ + magic_configure(i, 0, magic); /* no IRQ yet */ outb(0xc0, ports[i] + 9); if (inb(ports[i] + 9) != 0x80) continue; - else - overrides[current_override].NCR5380_map_name = ports[i]; + overrides[current_override].NCR5380_map_name = ports[i]; + port_idx = i; } else continue; } @@ -403,24 +425,65 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) } #endif instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata)); - if (instance == NULL) { -#ifndef SCSI_G_NCR5380_MEM - release_region(overrides[current_override].NCR5380_map_name, region_size); -#else - iounmap(iomem); - release_mem_region(base, NCR5380_region_size); -#endif - continue; - } + if (instance == NULL) + goto out_release; + hostdata = shost_priv(instance); - instance->NCR5380_instance_name = overrides[current_override].NCR5380_map_name; #ifndef SCSI_G_NCR5380_MEM + instance->io_port = overrides[current_override].NCR5380_map_name; instance->n_io_port = region_size; + hostdata->io_width = 1; /* 8-bit PDMA by default */ + + /* + * On NCR53C400 boards, NCR5380 registers are mapped 8 past + * the base address. + */ + switch (overrides[current_override].board) { + case BOARD_NCR53C400: + instance->io_port += 8; + hostdata->c400_ctl_status = 0; + hostdata->c400_blk_cnt = 1; + hostdata->c400_host_buf = 4; + break; + case BOARD_DTC3181E: + hostdata->io_width = 2; /* 16-bit PDMA */ + /* fall through */ + case BOARD_NCR53C400A: + case BOARD_HP_C2502: + hostdata->c400_ctl_status = 9; + hostdata->c400_blk_cnt = 10; + hostdata->c400_host_buf = 8; + break; + } #else - ((struct NCR5380_hostdata *)instance->hostdata)->iomem = iomem; + instance->base = overrides[current_override].NCR5380_map_name; + hostdata->iomem = iomem; + switch (overrides[current_override].board) { + case BOARD_NCR53C400: + hostdata->c400_ctl_status = 0x100; + hostdata->c400_blk_cnt = 0x101; + hostdata->c400_host_buf = 0x104; + break; + case BOARD_DTC3181E: + case BOARD_NCR53C400A: + case BOARD_HP_C2502: + pr_err(DRV_MODULE_NAME ": unknown register offsets\n"); + goto out_unregister; + } #endif - NCR5380_init(instance, flags); + if (NCR5380_init(instance, flags)) + goto out_unregister; + + switch (overrides[current_override].board) { + case BOARD_NCR53C400: + case BOARD_DTC3181E: + case BOARD_NCR53C400A: + case BOARD_HP_C2502: + NCR5380_write(hostdata->c400_ctl_status, CSR_BASE); + } + + NCR5380_maybe_reset_bus(instance); if (overrides[current_override].irq != IRQ_AUTO) instance->irq = overrides[current_override].irq; @@ -431,12 +494,18 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) if (instance->irq == 255) instance->irq = NO_IRQ; - if (instance->irq != NO_IRQ) + if (instance->irq != NO_IRQ) { +#ifndef SCSI_G_NCR5380_MEM + /* set IRQ for HP C2502 */ + if (overrides[current_override].board == BOARD_HP_C2502) + magic_configure(port_idx, instance->irq, magic); +#endif if (request_irq(instance->irq, generic_NCR5380_intr, 0, "NCR5380", instance)) { printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq); instance->irq = NO_IRQ; } + } if (instance->irq == NO_IRQ) { printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no); @@ -447,6 +516,17 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) ++count; } return count; + +out_unregister: + scsi_unregister(instance); +out_release: +#ifndef SCSI_G_NCR5380_MEM + release_region(overrides[current_override].NCR5380_map_name, region_size); +#else + iounmap(iomem); + release_mem_region(base, NCR5380_region_size); +#endif + return count; } /** @@ -460,21 +540,15 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) static int generic_NCR5380_release_resources(struct Scsi_Host *instance) { - NCR5380_local_declare(); - NCR5380_setup(instance); - if (instance->irq != NO_IRQ) free_irq(instance->irq, instance); NCR5380_exit(instance); - #ifndef SCSI_G_NCR5380_MEM - release_region(instance->NCR5380_instance_name, instance->n_io_port); + release_region(instance->io_port, instance->n_io_port); #else iounmap(((struct NCR5380_hostdata *)instance->hostdata)->iomem); - release_mem_region(instance->NCR5380_instance_name, NCR5380_region_size); + release_mem_region(instance->base, NCR5380_region_size); #endif - - return 0; } @@ -507,7 +581,7 @@ generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev, } #endif -#ifdef NCR53C400_PSEUDO_DMA +#ifdef PSEUDO_DMA /** * NCR5380_pread - pseudo DMA read @@ -521,75 +595,68 @@ generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev, static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len) { + struct NCR5380_hostdata *hostdata = shost_priv(instance); int blocks = len / 128; int start = 0; - int bl; - - NCR5380_local_declare(); - NCR5380_setup(instance); - NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE | CSR_TRANS_DIR); - NCR5380_write(C400_BLOCK_COUNTER_REG, blocks); + NCR5380_write(hostdata->c400_ctl_status, CSR_BASE | CSR_TRANS_DIR); + NCR5380_write(hostdata->c400_blk_cnt, blocks); while (1) { - if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) { + if (NCR5380_read(hostdata->c400_blk_cnt) == 0) break; - } - if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) { + if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) { printk(KERN_ERR "53C400r: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks); return -1; } - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY); + while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY) + ; /* FIXME - no timeout */ #ifndef SCSI_G_NCR5380_MEM - { - int i; - for (i = 0; i < 128; i++) - dst[start + i] = NCR5380_read(C400_HOST_BUFFER); - } + if (hostdata->io_width == 2) + insw(instance->io_port + hostdata->c400_host_buf, + dst + start, 64); + else + insb(instance->io_port + hostdata->c400_host_buf, + dst + start, 128); #else /* implies SCSI_G_NCR5380_MEM */ - memcpy_fromio(dst + start, iomem + NCR53C400_host_buffer, 128); + memcpy_fromio(dst + start, + hostdata->iomem + NCR53C400_host_buffer, 128); #endif start += 128; blocks--; } if (blocks) { - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY) - { - // FIXME - no timeout - } + while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY) + ; /* FIXME - no timeout */ #ifndef SCSI_G_NCR5380_MEM - { - int i; - for (i = 0; i < 128; i++) - dst[start + i] = NCR5380_read(C400_HOST_BUFFER); - } + if (hostdata->io_width == 2) + insw(instance->io_port + hostdata->c400_host_buf, + dst + start, 64); + else + insb(instance->io_port + hostdata->c400_host_buf, + dst + start, 128); #else /* implies SCSI_G_NCR5380_MEM */ - memcpy_fromio(dst + start, iomem + NCR53C400_host_buffer, 128); + memcpy_fromio(dst + start, + hostdata->iomem + NCR53C400_host_buffer, 128); #endif start += 128; blocks--; } - if (!(NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ)) + if (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ)) printk("53C400r: no 53C80 gated irq after transfer"); -#if 0 - /* - * DON'T DO THIS - THEY NEVER ARRIVE! - */ - printk("53C400r: Waiting for 53C80 registers\n"); - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG) + /* wait for 53C80 registers to be available */ + while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)) ; -#endif + if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER)) printk(KERN_ERR "53C400r: no end dma signal\n"); - NCR5380_write(MODE_REG, MR_BASE); - NCR5380_read(RESET_PARITY_INTERRUPT_REG); return 0; } @@ -605,89 +672,91 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len) { + struct NCR5380_hostdata *hostdata = shost_priv(instance); int blocks = len / 128; int start = 0; - int bl; - int i; - NCR5380_local_declare(); - NCR5380_setup(instance); - - NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE); - NCR5380_write(C400_BLOCK_COUNTER_REG, blocks); + NCR5380_write(hostdata->c400_ctl_status, CSR_BASE); + NCR5380_write(hostdata->c400_blk_cnt, blocks); while (1) { - if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) { + if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) { printk(KERN_ERR "53C400w: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks); return -1; } - if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) { + if (NCR5380_read(hostdata->c400_blk_cnt) == 0) break; - } - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY) + while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY) ; // FIXME - timeout #ifndef SCSI_G_NCR5380_MEM - { - for (i = 0; i < 128; i++) - NCR5380_write(C400_HOST_BUFFER, src[start + i]); - } + if (hostdata->io_width == 2) + outsw(instance->io_port + hostdata->c400_host_buf, + src + start, 64); + else + outsb(instance->io_port + hostdata->c400_host_buf, + src + start, 128); #else /* implies SCSI_G_NCR5380_MEM */ - memcpy_toio(iomem + NCR53C400_host_buffer, src + start, 128); + memcpy_toio(hostdata->iomem + NCR53C400_host_buffer, + src + start, 128); #endif start += 128; blocks--; } if (blocks) { - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY) + while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY) ; // FIXME - no timeout #ifndef SCSI_G_NCR5380_MEM - { - for (i = 0; i < 128; i++) - NCR5380_write(C400_HOST_BUFFER, src[start + i]); - } + if (hostdata->io_width == 2) + outsw(instance->io_port + hostdata->c400_host_buf, + src + start, 64); + else + outsb(instance->io_port + hostdata->c400_host_buf, + src + start, 128); #else /* implies SCSI_G_NCR5380_MEM */ - memcpy_toio(iomem + NCR53C400_host_buffer, src + start, 128); + memcpy_toio(hostdata->iomem + NCR53C400_host_buffer, + src + start, 128); #endif start += 128; blocks--; } -#if 0 - printk("53C400w: waiting for registers to be available\n"); - THEY NEVER DO ! while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG); - printk("53C400w: Got em\n"); -#endif - - /* Let's wait for this instead - could be ugly */ - /* All documentation says to check for this. Maybe my hardware is too - * fast. Waiting for it seems to work fine! KLL - */ - while (!(i = NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ)) - ; // FIXME - no timeout - - /* - * I know. i is certainly != 0 here but the loop is new. See previous - * comment. - */ - if (i) { - if (!((i = NCR5380_read(BUS_AND_STATUS_REG)) & BASR_END_DMA_TRANSFER)) - printk(KERN_ERR "53C400w: No END OF DMA bit - WHOOPS! BASR=%0x\n", i); - } else - printk(KERN_ERR "53C400w: no 53C80 gated irq after transfer (last block)\n"); + /* wait for 53C80 registers to be available */ + while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)) { + udelay(4); /* DTC436 chip hangs without this */ + /* FIXME - no timeout */ + } -#if 0 if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER)) { printk(KERN_ERR "53C400w: no end dma signal\n"); } -#endif + while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT)) ; // TIMEOUT return 0; } -#endif /* PSEUDO_DMA */ + +static int generic_NCR5380_dma_xfer_len(struct scsi_cmnd *cmd) +{ + int transfersize = cmd->transfersize; + + /* Limit transfers to 32K, for xx400 & xx406 + * pseudoDMA that transfers in 128 bytes blocks. + */ + if (transfersize > 32 * 1024 && cmd->SCp.this_residual && + !(cmd->SCp.this_residual % transfersize)) + transfersize = 32 * 1024; + + /* 53C400 datasheet: non-modulo-128-byte transfers should use PIO */ + if (transfersize % 128) + transfersize = 0; + + return transfersize; +} + +#endif /* PSEUDO_DMA */ /* * Include the NCR5380 core code that we build our driver around @@ -696,22 +765,24 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, #include "NCR5380.c" static struct scsi_host_template driver_template = { - .show_info = generic_NCR5380_show_info, - .name = "Generic NCR5380/NCR53C400 SCSI", - .detect = generic_NCR5380_detect, - .release = generic_NCR5380_release_resources, - .info = generic_NCR5380_info, - .queuecommand = generic_NCR5380_queue_command, + .proc_name = DRV_MODULE_NAME, + .name = "Generic NCR5380/NCR53C400 SCSI", + .detect = generic_NCR5380_detect, + .release = generic_NCR5380_release_resources, + .info = generic_NCR5380_info, + .queuecommand = generic_NCR5380_queue_command, .eh_abort_handler = generic_NCR5380_abort, .eh_bus_reset_handler = generic_NCR5380_bus_reset, - .bios_param = NCR5380_BIOSPARAM, - .can_queue = CAN_QUEUE, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = CMD_PER_LUN, - .use_clustering = DISABLE_CLUSTERING, + .bios_param = NCR5380_BIOSPARAM, + .can_queue = 16, + .this_id = 7, + .sg_tablesize = SG_ALL, + .cmd_per_lun = 2, + .use_clustering = DISABLE_CLUSTERING, + .cmd_size = NCR5380_CMD_SIZE, + .max_sectors = 128, }; -#include <linux/module.h> + #include "scsi_module.c" module_param(ncr_irq, int, 0); @@ -721,6 +792,7 @@ module_param(ncr_5380, int, 0); module_param(ncr_53c400, int, 0); module_param(ncr_53c400a, int, 0); module_param(dtc_3181e, int, 0); +module_param(hp_c2502, int, 0); MODULE_LICENSE("GPL"); #if !defined(SCSI_G_NCR5380_MEM) && defined(MODULE) diff --git a/drivers/scsi/g_NCR5380.h b/drivers/scsi/g_NCR5380.h index bea1a3b9b862..6f3d2ac4f185 100644 --- a/drivers/scsi/g_NCR5380.h +++ b/drivers/scsi/g_NCR5380.h @@ -14,81 +14,67 @@ #ifndef GENERIC_NCR5380_H #define GENERIC_NCR5380_H -#ifdef NCR53C400 +#ifdef CONFIG_SCSI_GENERIC_NCR53C400 #define BIOSPARAM #define NCR5380_BIOSPARAM generic_NCR5380_biosparam #else #define NCR5380_BIOSPARAM NULL #endif -#ifndef ASM - -#ifndef CMD_PER_LUN -#define CMD_PER_LUN 2 -#endif - -#ifndef CAN_QUEUE -#define CAN_QUEUE 16 -#endif - #define __STRVAL(x) #x #define STRVAL(x) __STRVAL(x) #ifndef SCSI_G_NCR5380_MEM +#define DRV_MODULE_NAME "g_NCR5380" -#define NCR5380_map_config port #define NCR5380_map_type int #define NCR5380_map_name port -#define NCR5380_instance_name io_port -#define NCR53C400_register_offset 0 -#define NCR53C400_address_adjust 8 -#ifdef NCR53C400 +#ifdef CONFIG_SCSI_GENERIC_NCR53C400 #define NCR5380_region_size 16 #else #define NCR5380_region_size 8 #endif -#define NCR5380_read(reg) (inb(NCR5380_map_name + (reg))) -#define NCR5380_write(reg, value) (outb((value), (NCR5380_map_name + (reg)))) +#define NCR5380_read(reg) \ + inb(instance->io_port + (reg)) +#define NCR5380_write(reg, value) \ + outb(value, instance->io_port + (reg)) #define NCR5380_implementation_fields \ - NCR5380_map_type NCR5380_map_name - -#define NCR5380_local_declare() \ - register NCR5380_implementation_fields - -#define NCR5380_setup(instance) \ - NCR5380_map_name = (NCR5380_map_type)((instance)->NCR5380_instance_name) + int c400_ctl_status; \ + int c400_blk_cnt; \ + int c400_host_buf; \ + int io_width; #else /* therefore SCSI_G_NCR5380_MEM */ +#define DRV_MODULE_NAME "g_NCR5380_mmio" -#define NCR5380_map_config memory #define NCR5380_map_type unsigned long #define NCR5380_map_name base -#define NCR5380_instance_name base -#define NCR53C400_register_offset 0x108 -#define NCR53C400_address_adjust 0 #define NCR53C400_mem_base 0x3880 #define NCR53C400_host_buffer 0x3900 #define NCR5380_region_size 0x3a00 -#define NCR5380_read(reg) readb(iomem + NCR53C400_mem_base + (reg)) -#define NCR5380_write(reg, value) writeb(value, iomem + NCR53C400_mem_base + (reg)) +#define NCR5380_read(reg) \ + readb(((struct NCR5380_hostdata *)shost_priv(instance))->iomem + \ + NCR53C400_mem_base + (reg)) +#define NCR5380_write(reg, value) \ + writeb(value, ((struct NCR5380_hostdata *)shost_priv(instance))->iomem + \ + NCR53C400_mem_base + (reg)) #define NCR5380_implementation_fields \ - NCR5380_map_type NCR5380_map_name; \ - void __iomem *iomem; - -#define NCR5380_local_declare() \ - register void __iomem *iomem - -#define NCR5380_setup(instance) \ - iomem = (((struct NCR5380_hostdata *)(instance)->hostdata)->iomem) + void __iomem *iomem; \ + int c400_ctl_status; \ + int c400_blk_cnt; \ + int c400_host_buf; #endif +#define NCR5380_dma_xfer_len(instance, cmd, phase) \ + generic_NCR5380_dma_xfer_len(cmd) + #define NCR5380_intr generic_NCR5380_intr #define NCR5380_queue_command generic_NCR5380_queue_command #define NCR5380_abort generic_NCR5380_abort @@ -102,7 +88,7 @@ #define BOARD_NCR53C400 1 #define BOARD_NCR53C400A 2 #define BOARD_DTC3181E 3 +#define BOARD_HP_C2502 4 -#endif /* ndef ASM */ #endif /* GENERIC_NCR5380_H */ diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c index d54381149c0d..057fdeb720ac 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c @@ -247,41 +247,36 @@ /* ITCT header */ /* qw0 */ #define ITCT_HDR_DEV_TYPE_OFF 0 -#define ITCT_HDR_DEV_TYPE_MSK (0x3 << ITCT_HDR_DEV_TYPE_OFF) +#define ITCT_HDR_DEV_TYPE_MSK (0x3ULL << ITCT_HDR_DEV_TYPE_OFF) #define ITCT_HDR_VALID_OFF 2 -#define ITCT_HDR_VALID_MSK (0x1 << ITCT_HDR_VALID_OFF) -#define ITCT_HDR_BREAK_REPLY_ENA_OFF 3 -#define ITCT_HDR_BREAK_REPLY_ENA_MSK (0x1 << ITCT_HDR_BREAK_REPLY_ENA_OFF) +#define ITCT_HDR_VALID_MSK (0x1ULL << ITCT_HDR_VALID_OFF) #define ITCT_HDR_AWT_CONTROL_OFF 4 -#define ITCT_HDR_AWT_CONTROL_MSK (0x1 << ITCT_HDR_AWT_CONTROL_OFF) +#define ITCT_HDR_AWT_CONTROL_MSK (0x1ULL << ITCT_HDR_AWT_CONTROL_OFF) #define ITCT_HDR_MAX_CONN_RATE_OFF 5 -#define ITCT_HDR_MAX_CONN_RATE_MSK (0xf << ITCT_HDR_MAX_CONN_RATE_OFF) +#define ITCT_HDR_MAX_CONN_RATE_MSK (0xfULL << ITCT_HDR_MAX_CONN_RATE_OFF) #define ITCT_HDR_VALID_LINK_NUM_OFF 9 -#define ITCT_HDR_VALID_LINK_NUM_MSK (0xf << ITCT_HDR_VALID_LINK_NUM_OFF) +#define ITCT_HDR_VALID_LINK_NUM_MSK (0xfULL << ITCT_HDR_VALID_LINK_NUM_OFF) #define ITCT_HDR_PORT_ID_OFF 13 -#define ITCT_HDR_PORT_ID_MSK (0x7 << ITCT_HDR_PORT_ID_OFF) +#define ITCT_HDR_PORT_ID_MSK (0x7ULL << ITCT_HDR_PORT_ID_OFF) #define ITCT_HDR_SMP_TIMEOUT_OFF 16 -#define ITCT_HDR_SMP_TIMEOUT_MSK (0xffff << ITCT_HDR_SMP_TIMEOUT_OFF) -#define ITCT_HDR_MAX_BURST_BYTES_OFF 16 -#define ITCT_HDR_MAX_BURST_BYTES_MSK (0xffffffff << \ - ITCT_MAX_BURST_BYTES_OFF) +#define ITCT_HDR_SMP_TIMEOUT_MSK (0xffffULL << ITCT_HDR_SMP_TIMEOUT_OFF) /* qw1 */ #define ITCT_HDR_MAX_SAS_ADDR_OFF 0 #define ITCT_HDR_MAX_SAS_ADDR_MSK (0xffffffffffffffff << \ ITCT_HDR_MAX_SAS_ADDR_OFF) /* qw2 */ #define ITCT_HDR_IT_NEXUS_LOSS_TL_OFF 0 -#define ITCT_HDR_IT_NEXUS_LOSS_TL_MSK (0xffff << \ +#define ITCT_HDR_IT_NEXUS_LOSS_TL_MSK (0xffffULL << \ ITCT_HDR_IT_NEXUS_LOSS_TL_OFF) #define ITCT_HDR_BUS_INACTIVE_TL_OFF 16 -#define ITCT_HDR_BUS_INACTIVE_TL_MSK (0xffff << \ +#define ITCT_HDR_BUS_INACTIVE_TL_MSK (0xffffULL << \ ITCT_HDR_BUS_INACTIVE_TL_OFF) #define ITCT_HDR_MAX_CONN_TL_OFF 32 -#define ITCT_HDR_MAX_CONN_TL_MSK (0xffff << \ +#define ITCT_HDR_MAX_CONN_TL_MSK (0xffffULL << \ ITCT_HDR_MAX_CONN_TL_OFF) #define ITCT_HDR_REJ_OPEN_TL_OFF 48 -#define ITCT_HDR_REJ_OPEN_TL_MSK (0xffff << \ - ITCT_REJ_OPEN_TL_OFF) +#define ITCT_HDR_REJ_OPEN_TL_MSK (0xffffULL << \ + ITCT_HDR_REJ_OPEN_TL_OFF) /* Err record header */ #define ERR_HDR_DMA_TX_ERR_TYPE_OFF 0 @@ -533,10 +528,10 @@ static void setup_itct_v1_hw(struct hisi_hba *hisi_hba, itct->sas_addr = __swab64(itct->sas_addr); /* qw2 */ - itct->qw2 = cpu_to_le64((500 < ITCT_HDR_IT_NEXUS_LOSS_TL_OFF) | - (0xff00 < ITCT_HDR_BUS_INACTIVE_TL_OFF) | - (0xff00 < ITCT_HDR_MAX_CONN_TL_OFF) | - (0xff00 < ITCT_HDR_REJ_OPEN_TL_OFF)); + itct->qw2 = cpu_to_le64((500ULL << ITCT_HDR_IT_NEXUS_LOSS_TL_OFF) | + (0xff00ULL << ITCT_HDR_BUS_INACTIVE_TL_OFF) | + (0xff00ULL << ITCT_HDR_MAX_CONN_TL_OFF) | + (0xff00ULL << ITCT_HDR_REJ_OPEN_TL_OFF)); } static void free_device_v1_hw(struct hisi_hba *hisi_hba, @@ -544,7 +539,8 @@ static void free_device_v1_hw(struct hisi_hba *hisi_hba, { u64 dev_id = sas_dev->device_id; struct hisi_sas_itct *itct = &hisi_hba->itct[dev_id]; - u32 qw0, reg_val = hisi_sas_read32(hisi_hba, CFG_AGING_TIME); + u64 qw0; + u32 reg_val = hisi_sas_read32(hisi_hba, CFG_AGING_TIME); reg_val |= CFG_AGING_TIME_ITCT_REL_MSK; hisi_sas_write32(hisi_hba, CFG_AGING_TIME, reg_val); diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c index 4e1a632ccf16..f8b88fa78e62 100644 --- a/drivers/scsi/imm.c +++ b/drivers/scsi/imm.c @@ -43,6 +43,7 @@ typedef struct { unsigned dp:1; /* Data phase present */ unsigned rd:1; /* Read data in data phase */ unsigned wanted:1; /* Parport sharing busy flag */ + unsigned int dev_no; /* Device number */ wait_queue_head_t *waiting; struct Scsi_Host *host; struct list_head list; @@ -1120,15 +1121,40 @@ static struct scsi_host_template imm_template = { static LIST_HEAD(imm_hosts); +/* + * Finds the first available device number that can be alloted to the + * new imm device and returns the address of the previous node so that + * we can add to the tail and have a list in the ascending order. + */ + +static inline imm_struct *find_parent(void) +{ + imm_struct *dev, *par = NULL; + unsigned int cnt = 0; + + if (list_empty(&imm_hosts)) + return NULL; + + list_for_each_entry(dev, &imm_hosts, list) { + if (dev->dev_no != cnt) + return par; + cnt++; + par = dev; + } + + return par; +} + static int __imm_attach(struct parport *pb) { struct Scsi_Host *host; - imm_struct *dev; + imm_struct *dev, *temp; DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waiting); DEFINE_WAIT(wait); int ports; int modes, ppb; int err = -ENOMEM; + struct pardev_cb imm_cb; init_waitqueue_head(&waiting); @@ -1141,9 +1167,15 @@ static int __imm_attach(struct parport *pb) dev->mode = IMM_AUTODETECT; INIT_LIST_HEAD(&dev->list); - dev->dev = parport_register_device(pb, "imm", NULL, imm_wakeup, - NULL, 0, dev); + temp = find_parent(); + if (temp) + dev->dev_no = temp->dev_no + 1; + + memset(&imm_cb, 0, sizeof(imm_cb)); + imm_cb.private = dev; + imm_cb.wakeup = imm_wakeup; + dev->dev = parport_register_dev_model(pb, "imm", &imm_cb, dev->dev_no); if (!dev->dev) goto out; @@ -1207,7 +1239,10 @@ static int __imm_attach(struct parport *pb) host->unique_id = pb->number; *(imm_struct **)&host->hostdata = dev; dev->host = host; - list_add_tail(&dev->list, &imm_hosts); + if (!temp) + list_add_tail(&dev->list, &imm_hosts); + else + list_add_tail(&dev->list, &temp->list); err = scsi_add_host(host, NULL); if (err) goto out2; @@ -1245,9 +1280,10 @@ static void imm_detach(struct parport *pb) } static struct parport_driver imm_driver = { - .name = "imm", - .attach = imm_attach, - .detach = imm_detach, + .name = "imm", + .match_port = imm_attach, + .detach = imm_detach, + .devmodel = true, }; static int __init imm_driver_init(void) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 536cd5a80422..1c3759bab80b 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -4003,13 +4003,12 @@ static ssize_t ipr_store_update_fw(struct device *dev, struct ipr_sglist *sglist; char fname[100]; char *src; - int len, result, dnld_size; + int result, dnld_size; if (!capable(CAP_SYS_ADMIN)) return -EACCES; - len = snprintf(fname, 99, "%s", buf); - fname[len-1] = '\0'; + snprintf(fname, sizeof(fname), "%s", buf); if (request_firmware(&fw_entry, fname, &ioa_cfg->pdev->dev)) { dev_err(&ioa_cfg->pdev->dev, "Firmware file %s not found\n", fname); diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c index d64a769b8155..bb2381314a2b 100644 --- a/drivers/scsi/mac_scsi.c +++ b/drivers/scsi/mac_scsi.c @@ -12,7 +12,6 @@ */ #include <linux/types.h> -#include <linux/delay.h> #include <linux/module.h> #include <linux/ioport.h> #include <linux/init.h> @@ -32,14 +31,13 @@ #define PSEUDO_DMA #define NCR5380_implementation_fields unsigned char *pdma_base -#define NCR5380_local_declare() struct Scsi_Host *_instance -#define NCR5380_setup(instance) _instance = instance -#define NCR5380_read(reg) macscsi_read(_instance, reg) -#define NCR5380_write(reg, value) macscsi_write(_instance, reg, value) +#define NCR5380_read(reg) macscsi_read(instance, reg) +#define NCR5380_write(reg, value) macscsi_write(instance, reg, value) #define NCR5380_pread macscsi_pread #define NCR5380_pwrite macscsi_pwrite +#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize) #define NCR5380_intr macscsi_intr #define NCR5380_queue_command macscsi_queue_command @@ -51,8 +49,6 @@ #include "NCR5380.h" -#define RESET_BOOT - static int setup_can_queue = -1; module_param(setup_can_queue, int, 0); static int setup_cmd_per_lun = -1; @@ -65,17 +61,8 @@ static int setup_use_tagged_queuing = -1; module_param(setup_use_tagged_queuing, int, 0); static int setup_hostid = -1; module_param(setup_hostid, int, 0); - -/* Time (in jiffies) to wait after a reset; the SCSI standard calls for 250ms, - * we usually do 0.5s to be on the safe side. But Toshiba CD-ROMs once more - * need ten times the standard value... */ -#define TOSHIBA_DELAY - -#ifdef TOSHIBA_DELAY -#define AFTER_RESET_DELAY (5*HZ/2) -#else -#define AFTER_RESET_DELAY (HZ/2) -#endif +static int setup_toshiba_delay = -1; +module_param(setup_toshiba_delay, int, 0); /* * NCR 5380 register access functions @@ -94,12 +81,12 @@ static inline void macscsi_write(struct Scsi_Host *instance, int reg, int value) #ifndef MODULE static int __init mac_scsi_setup(char *str) { - int ints[7]; + int ints[8]; (void)get_options(str, ARRAY_SIZE(ints), ints); - if (ints[0] < 1 || ints[0] > 6) { - pr_err("Usage: mac5380=<can_queue>[,<cmd_per_lun>[,<sg_tablesize>[,<hostid>[,<use_tags>[,<use_pdma>]]]]]\n"); + if (ints[0] < 1) { + pr_err("Usage: mac5380=<can_queue>[,<cmd_per_lun>[,<sg_tablesize>[,<hostid>[,<use_tags>[,<use_pdma>[,<toshiba_delay>]]]]]]\n"); return 0; } if (ints[0] >= 1) @@ -114,50 +101,14 @@ static int __init mac_scsi_setup(char *str) setup_use_tagged_queuing = ints[5]; if (ints[0] >= 6) setup_use_pdma = ints[6]; + if (ints[0] >= 7) + setup_toshiba_delay = ints[7]; return 1; } __setup("mac5380=", mac_scsi_setup); #endif /* !MODULE */ -#ifdef RESET_BOOT -/* - * Our 'bus reset on boot' function - */ - -static void mac_scsi_reset_boot(struct Scsi_Host *instance) -{ - unsigned long end; - - NCR5380_local_declare(); - NCR5380_setup(instance); - - /* - * Do a SCSI reset to clean up the bus during initialization. No messing - * with the queues, interrupts, or locks necessary here. - */ - - printk(KERN_INFO "Macintosh SCSI: resetting the SCSI bus..." ); - - /* get in phase */ - NCR5380_write( TARGET_COMMAND_REG, - PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) )); - - /* assert RST */ - NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST ); - /* The min. reset hold time is 25us, so 40us should be enough */ - udelay( 50 ); - /* reset RST and interrupt */ - NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE ); - NCR5380_read( RESET_PARITY_INTERRUPT_REG ); - - for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); ) - barrier(); - - printk(KERN_INFO " done\n" ); -} -#endif - #ifdef PSEUDO_DMA /* Pseudo-DMA: (Ove Edlund) @@ -235,9 +186,6 @@ static int macscsi_pread(struct Scsi_Host *instance, unsigned char *d; unsigned char *s; - NCR5380_local_declare(); - NCR5380_setup(instance); - s = hostdata->pdma_base + (INPUT_DATA_REG << 4); d = dst; @@ -329,9 +277,6 @@ static int macscsi_pwrite(struct Scsi_Host *instance, unsigned char *s; unsigned char *d; - NCR5380_local_declare(); - NCR5380_setup(instance); - s = src; d = hostdata->pdma_base + (OUTPUT_DATA_REG << 4); @@ -364,20 +309,22 @@ static int macscsi_pwrite(struct Scsi_Host *instance, #define PFX DRV_MODULE_NAME ": " static struct scsi_host_template mac_scsi_template = { - .module = THIS_MODULE, - .proc_name = DRV_MODULE_NAME, - .show_info = macscsi_show_info, - .write_info = macscsi_write_info, - .name = "Macintosh NCR5380 SCSI", - .info = macscsi_info, - .queuecommand = macscsi_queue_command, - .eh_abort_handler = macscsi_abort, - .eh_bus_reset_handler = macscsi_bus_reset, - .can_queue = 16, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 2, - .use_clustering = DISABLE_CLUSTERING + .module = THIS_MODULE, + .proc_name = DRV_MODULE_NAME, + .show_info = macscsi_show_info, + .write_info = macscsi_write_info, + .name = "Macintosh NCR5380 SCSI", + .info = macscsi_info, + .queuecommand = macscsi_queue_command, + .eh_abort_handler = macscsi_abort, + .eh_bus_reset_handler = macscsi_bus_reset, + .can_queue = 16, + .this_id = 7, + .sg_tablesize = SG_ALL, + .cmd_per_lun = 2, + .use_clustering = DISABLE_CLUSTERING, + .cmd_size = NCR5380_CMD_SIZE, + .max_sectors = 128, }; static int __init mac_scsi_probe(struct platform_device *pdev) @@ -432,15 +379,14 @@ static int __init mac_scsi_probe(struct platform_device *pdev) } else host_flags |= FLAG_NO_PSEUDO_DMA; -#ifdef RESET_BOOT - mac_scsi_reset_boot(instance); -#endif - #ifdef SUPPORT_TAGS host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0; #endif + host_flags |= setup_toshiba_delay > 0 ? FLAG_TOSHIBA_DELAY : 0; - NCR5380_init(instance, host_flags); + error = NCR5380_init(instance, host_flags); + if (error) + goto fail_init; if (instance->irq != NO_IRQ) { error = request_irq(instance->irq, macscsi_intr, IRQF_SHARED, @@ -449,6 +395,8 @@ static int __init mac_scsi_probe(struct platform_device *pdev) goto fail_irq; } + NCR5380_maybe_reset_bus(instance); + error = scsi_add_host(instance, NULL); if (error) goto fail_host; @@ -463,6 +411,7 @@ fail_host: free_irq(instance->irq, instance); fail_irq: NCR5380_exit(instance); +fail_init: scsi_host_put(instance); return error; } diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c index a70692779a16..4cf9ed96414f 100644 --- a/drivers/scsi/megaraid/megaraid_mm.c +++ b/drivers/scsi/megaraid/megaraid_mm.c @@ -179,8 +179,12 @@ mraid_mm_ioctl(struct file *filep, unsigned int cmd, unsigned long arg) /* * The following call will block till a kioc is available + * or return NULL if the list head is empty for the pointer + * of type mraid_mmapt passed to mraid_mm_alloc_kioc */ kioc = mraid_mm_alloc_kioc(adp); + if (!kioc) + return -ENXIO; /* * User sent the old mimd_t ioctl packet. Convert it to uioc_t. diff --git a/drivers/scsi/pas16.c b/drivers/scsi/pas16.c index e81eadd08afc..512037e27783 100644 --- a/drivers/scsi/pas16.c +++ b/drivers/scsi/pas16.c @@ -1,6 +1,4 @@ #define PSEUDO_DMA -#define UNSAFE /* Not unsafe for PAS16 -- use it */ -#define PDEBUG 0 /* * This driver adapted from Drew Eckhardt's Trantor T128 driver @@ -71,14 +69,10 @@ #include <linux/module.h> -#include <linux/signal.h> -#include <linux/proc_fs.h> #include <asm/io.h> #include <asm/dma.h> #include <linux/blkdev.h> -#include <linux/delay.h> #include <linux/interrupt.h> -#include <linux/stat.h> #include <linux/init.h> #include <scsi/scsi_host.h> @@ -87,8 +81,8 @@ #include "NCR5380.h" -static unsigned short pas16_addr = 0; -static int pas16_irq = 0; +static unsigned short pas16_addr; +static int pas16_irq; static const int scsi_irq_translate[] = @@ -146,22 +140,6 @@ static const unsigned short pas16_offset[ 8 ] = * START_DMA_INITIATOR_RECEIVE_REG wo */ }; -/*----------------------------------------------------------------*/ -/* the following will set the monitor border color (useful to find - where something crashed or gets stuck at */ -/* 1 = blue - 2 = green - 3 = cyan - 4 = red - 5 = magenta - 6 = yellow - 7 = white -*/ -#if 1 -#define rtrc(i) {inb(0x3da); outb(0x31, 0x3c0); outb((i), 0x3c0);} -#else -#define rtrc(i) {} -#endif /* @@ -205,7 +183,7 @@ static void __init outb( 0x01, io_port + P_TIMEOUT_STATUS_REG_OFFSET ); /* Reset TC */ outb( 0x01, io_port + WAIT_STATE ); /* 1 Wait state */ - NCR5380_read( RESET_PARITY_INTERRUPT_REG ); + inb(io_port + pas16_offset[RESET_PARITY_INTERRUPT_REG]); /* Set the SCSI interrupt pointer without mucking up the sound * interrupt pointer in the same byte. @@ -280,13 +258,13 @@ static int __init * put in an additional test to try to weed them out. */ - outb( 0x01, io_port + WAIT_STATE ); /* 1 Wait state */ - NCR5380_write( MODE_REG, 0x20 ); /* Is it really SCSI? */ - if( NCR5380_read( MODE_REG ) != 0x20 ) /* Write to a reg. */ - return 0; /* and try to read */ - NCR5380_write( MODE_REG, 0x00 ); /* it back. */ - if( NCR5380_read( MODE_REG ) != 0x00 ) - return 0; + outb(0x01, io_port + WAIT_STATE); /* 1 Wait state */ + outb(0x20, io_port + pas16_offset[MODE_REG]); /* Is it really SCSI? */ + if (inb(io_port + pas16_offset[MODE_REG]) != 0x20) /* Write to a reg. */ + return 0; /* and try to read */ + outb(0x00, io_port + pas16_offset[MODE_REG]); /* it back. */ + if (inb(io_port + pas16_offset[MODE_REG]) != 0x00) + return 0; return 1; } @@ -305,7 +283,7 @@ static int __init static int __init pas16_setup(char *str) { - static int commandline_current = 0; + static int commandline_current; int i; int ints[10]; @@ -344,8 +322,8 @@ __setup("pas16=", pas16_setup); static int __init pas16_detect(struct scsi_host_template *tpnt) { - static int current_override = 0; - static unsigned short current_base = 0; + static int current_override; + static unsigned short current_base; struct Scsi_Host *instance; unsigned short io_port; int count; @@ -377,34 +355,32 @@ static int __init pas16_detect(struct scsi_host_template *tpnt) } else for (; !io_port && (current_base < NO_BASES); ++current_base) { -#if (PDEBUG & PDEBUG_INIT) - printk("scsi-pas16 : probing io_port %04x\n", (unsigned int) bases[current_base].io_port); -#endif + dprintk(NDEBUG_INIT, "pas16: probing io_port 0x%04x\n", + (unsigned int)bases[current_base].io_port); if ( !bases[current_base].noauto && pas16_hw_detect( current_base ) ){ io_port = bases[current_base].io_port; init_board( io_port, default_irqs[ current_base ], 0 ); -#if (PDEBUG & PDEBUG_INIT) - printk("scsi-pas16 : detected board.\n"); -#endif + dprintk(NDEBUG_INIT, "pas16: detected board\n"); } } - -#if defined(PDEBUG) && (PDEBUG & PDEBUG_INIT) - printk("scsi-pas16 : io_port = %04x\n", (unsigned int) io_port); -#endif + dprintk(NDEBUG_INIT, "pas16: io_port = 0x%04x\n", + (unsigned int)io_port); if (!io_port) break; instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata)); if(instance == NULL) - break; + goto out; instance->io_port = io_port; - NCR5380_init(instance, 0); + if (NCR5380_init(instance, 0)) + goto out_unregister; + + NCR5380_maybe_reset_bus(instance); if (overrides[current_override].irq != IRQ_AUTO) instance->irq = overrides[current_override].irq; @@ -431,14 +407,18 @@ static int __init pas16_detect(struct scsi_host_template *tpnt) outb( (inb(io_port + IO_CONFIG_3) & 0x0f), io_port + IO_CONFIG_3 ); } -#if defined(PDEBUG) && (PDEBUG & PDEBUG_INIT) - printk("scsi%d : irq = %d\n", instance->host_no, instance->irq); -#endif + dprintk(NDEBUG_INIT, "scsi%d : irq = %d\n", + instance->host_no, instance->irq); ++current_override; ++count; } return count; + +out_unregister: + scsi_unregister(instance); +out: + return count; } /* @@ -561,29 +541,29 @@ static int pas16_release(struct Scsi_Host *shost) if (shost->irq != NO_IRQ) free_irq(shost->irq, shost); NCR5380_exit(shost); - if (shost->io_port && shost->n_io_port) - release_region(shost->io_port, shost->n_io_port); scsi_unregister(shost); return 0; } static struct scsi_host_template driver_template = { - .name = "Pro Audio Spectrum-16 SCSI", - .detect = pas16_detect, - .release = pas16_release, - .proc_name = "pas16", - .show_info = pas16_show_info, - .write_info = pas16_write_info, - .info = pas16_info, - .queuecommand = pas16_queue_command, - .eh_abort_handler = pas16_abort, - .eh_bus_reset_handler = pas16_bus_reset, - .bios_param = pas16_biosparam, - .can_queue = CAN_QUEUE, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = CMD_PER_LUN, - .use_clustering = DISABLE_CLUSTERING, + .name = "Pro Audio Spectrum-16 SCSI", + .detect = pas16_detect, + .release = pas16_release, + .proc_name = "pas16", + .show_info = pas16_show_info, + .write_info = pas16_write_info, + .info = pas16_info, + .queuecommand = pas16_queue_command, + .eh_abort_handler = pas16_abort, + .eh_bus_reset_handler = pas16_bus_reset, + .bios_param = pas16_biosparam, + .can_queue = 32, + .this_id = 7, + .sg_tablesize = SG_ALL, + .cmd_per_lun = 2, + .use_clustering = DISABLE_CLUSTERING, + .cmd_size = NCR5380_CMD_SIZE, + .max_sectors = 128, }; #include "scsi_module.c" diff --git a/drivers/scsi/pas16.h b/drivers/scsi/pas16.h index c6109c80050b..d37527717225 100644 --- a/drivers/scsi/pas16.h +++ b/drivers/scsi/pas16.h @@ -24,9 +24,6 @@ #ifndef PAS16_H #define PAS16_H -#define PDEBUG_INIT 0x1 -#define PDEBUG_TRANSFER 0x2 - #define PAS16_DEFAULT_BASE_1 0x388 #define PAS16_DEFAULT_BASE_2 0x384 #define PAS16_DEFAULT_BASE_3 0x38c @@ -98,46 +95,16 @@ #define OPERATION_MODE_1 0xec03 #define IO_CONFIG_3 0xf002 +#define NCR5380_implementation_fields /* none */ -#ifndef ASM - -#ifndef CMD_PER_LUN -#define CMD_PER_LUN 2 -#endif - -#ifndef CAN_QUEUE -#define CAN_QUEUE 32 -#endif - -#define NCR5380_implementation_fields \ - volatile unsigned short io_port - -#define NCR5380_local_declare() \ - volatile unsigned short io_port +#define PAS16_io_port(reg) (instance->io_port + pas16_offset[(reg)]) -#define NCR5380_setup(instance) \ - io_port = (instance)->io_port - -#define PAS16_io_port(reg) ( io_port + pas16_offset[(reg)] ) - -#if !(PDEBUG & PDEBUG_TRANSFER) #define NCR5380_read(reg) ( inb(PAS16_io_port(reg)) ) #define NCR5380_write(reg, value) ( outb((value),PAS16_io_port(reg)) ) -#else -#define NCR5380_read(reg) \ - (((unsigned char) printk("scsi%d : read register %d at io_port %04x\n"\ - , instance->hostno, (reg), PAS16_io_port(reg))), inb( PAS16_io_port(reg)) ) - -#define NCR5380_write(reg, value) \ - (printk("scsi%d : write %02x to register %d at io_port %04x\n", \ - instance->hostno, (value), (reg), PAS16_io_port(reg)), \ - outb( (value),PAS16_io_port(reg) ) ) - -#endif +#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize) #define NCR5380_intr pas16_intr -#define do_NCR5380_intr do_pas16_intr #define NCR5380_queue_command pas16_queue_command #define NCR5380_abort pas16_abort #define NCR5380_bus_reset pas16_bus_reset @@ -150,5 +117,4 @@ #define PAS16_IRQS 0xd4a8 -#endif /* ndef ASM */ #endif /* PAS16_H */ diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index 2c1160c7ec92..47b9d13f97b8 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -227,6 +227,7 @@ static struct { {"Promise", "VTrak E610f", NULL, BLIST_SPARSELUN | BLIST_NO_RSOC}, {"Promise", "", NULL, BLIST_SPARSELUN}, {"QNAP", "iSCSI Storage", NULL, BLIST_MAX_1024}, + {"SYNOLOGY", "iSCSI Storage", NULL, BLIST_MAX_1024}, {"QUANTUM", "XP34301", "1071", BLIST_NOTQ}, {"REGAL", "CDC-4X", NULL, BLIST_MAX5LUN | BLIST_SINGLELUN}, {"SanDisk", "ImageMate CF-SD1", NULL, BLIST_FORCELUN}, diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index 41c115c230d9..55627d097873 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -390,7 +390,7 @@ module_param(storvsc_ringbuffer_size, int, S_IRUGO); MODULE_PARM_DESC(storvsc_ringbuffer_size, "Ring buffer size (bytes)"); module_param(storvsc_vcpus_per_sub_channel, int, S_IRUGO); -MODULE_PARM_DESC(vcpus_per_sub_channel, "Ratio of VCPUs to subchannels"); +MODULE_PARM_DESC(storvsc_vcpus_per_sub_channel, "Ratio of VCPUs to subchannels"); /* * Timeout in seconds for all devices managed by this driver. */ diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c index 22a42836d193..b9de487bbd31 100644 --- a/drivers/scsi/sun3_scsi.c +++ b/drivers/scsi/sun3_scsi.c @@ -53,13 +53,12 @@ #define NCR5380_queue_command sun3scsi_queue_command #define NCR5380_bus_reset sun3scsi_bus_reset #define NCR5380_abort sun3scsi_abort -#define NCR5380_show_info sun3scsi_show_info #define NCR5380_info sun3scsi_info #define NCR5380_dma_read_setup(instance, data, count) \ - sun3scsi_dma_setup(data, count, 0) + sun3scsi_dma_setup(instance, data, count, 0) #define NCR5380_dma_write_setup(instance, data, count) \ - sun3scsi_dma_setup(data, count, 1) + sun3scsi_dma_setup(instance, data, count, 1) #define NCR5380_dma_residual(instance) \ sun3scsi_dma_residual(instance) #define NCR5380_dma_xfer_len(instance, cmd, phase) \ @@ -86,10 +85,6 @@ module_param(setup_use_tagged_queuing, int, 0); static int setup_hostid = -1; module_param(setup_hostid, int, 0); -/* #define RESET_BOOT */ - -#define AFTER_RESET_DELAY (HZ/2) - /* ms to wait after hitting dma regs */ #define SUN3_DMA_DELAY 10 @@ -100,11 +95,10 @@ static struct scsi_cmnd *sun3_dma_setup_done; static unsigned char *sun3_scsi_regp; static volatile struct sun3_dma_regs *dregs; static struct sun3_udc_regs *udc_regs; -static unsigned char *sun3_dma_orig_addr = NULL; -static unsigned long sun3_dma_orig_count = 0; -static int sun3_dma_active = 0; -static unsigned long last_residual = 0; -static struct Scsi_Host *default_instance; +static unsigned char *sun3_dma_orig_addr; +static unsigned long sun3_dma_orig_count; +static int sun3_dma_active; +static unsigned long last_residual; /* * NCR 5380 register access functions @@ -144,50 +138,12 @@ static inline void sun3_udc_write(unsigned short val, unsigned char reg) } #endif -#ifdef RESET_BOOT -static void sun3_scsi_reset_boot(struct Scsi_Host *instance) -{ - unsigned long end; - - /* - * Do a SCSI reset to clean up the bus during initialization. No - * messing with the queues, interrupts, or locks necessary here. - */ - - printk( "Sun3 SCSI: resetting the SCSI bus..." ); - - /* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */ -// sun3_disable_irq( IRQ_SUN3_SCSI ); - - /* get in phase */ - NCR5380_write( TARGET_COMMAND_REG, - PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) )); - - /* assert RST */ - NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST ); - - /* The min. reset hold time is 25us, so 40us should be enough */ - udelay( 50 ); - - /* reset RST and interrupt */ - NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE ); - NCR5380_read( RESET_PARITY_INTERRUPT_REG ); - - for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); ) - barrier(); - - /* switch on SCSI IRQ again */ -// sun3_enable_irq( IRQ_SUN3_SCSI ); - - printk( " done\n" ); -} -#endif - // safe bits for the CSR #define CSR_GOOD 0x060f -static irqreturn_t scsi_sun3_intr(int irq, void *dummy) +static irqreturn_t scsi_sun3_intr(int irq, void *dev) { + struct Scsi_Host *instance = dev; unsigned short csr = dregs->csr; int handled = 0; @@ -196,46 +152,24 @@ static irqreturn_t scsi_sun3_intr(int irq, void *dummy) #endif if(csr & ~CSR_GOOD) { - if(csr & CSR_DMA_BUSERR) { - printk("scsi%d: bus error in dma\n", default_instance->host_no); - } - - if(csr & CSR_DMA_CONFLICT) { - printk("scsi%d: dma conflict\n", default_instance->host_no); - } + if (csr & CSR_DMA_BUSERR) + shost_printk(KERN_ERR, instance, "bus error in DMA\n"); + if (csr & CSR_DMA_CONFLICT) + shost_printk(KERN_ERR, instance, "DMA conflict\n"); handled = 1; } if(csr & (CSR_SDB_INT | CSR_DMA_INT)) { - NCR5380_intr(irq, dummy); + NCR5380_intr(irq, dev); handled = 1; } return IRQ_RETVAL(handled); } -/* - * Debug stuff - to be called on NMI, or sysrq key. Use at your own risk; - * reentering NCR5380_print_status seems to have ugly side effects - */ - -/* this doesn't seem to get used at all -- sam */ -#if 0 -void sun3_sun3_debug (void) -{ - unsigned long flags; - - if (default_instance) { - local_irq_save(flags); - NCR5380_print_status(default_instance); - local_irq_restore(flags); - } -} -#endif - - /* sun3scsi_dma_setup() -- initialize the dma controller for a read/write */ -static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int write_flag) +static unsigned long sun3scsi_dma_setup(struct Scsi_Host *instance, + void *data, unsigned long count, int write_flag) { void *addr; @@ -287,10 +221,9 @@ static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int wri dregs->csr |= CSR_FIFO; if(dregs->fifo_count != count) { - printk("scsi%d: fifo_mismatch %04x not %04x\n", - default_instance->host_no, dregs->fifo_count, - (unsigned int) count); - NCR5380_dprint(NDEBUG_DMA, default_instance); + shost_printk(KERN_ERR, instance, "FIFO mismatch %04x not %04x\n", + dregs->fifo_count, (unsigned int) count); + NCR5380_dprint(NDEBUG_DMA, instance); } /* setup udc */ @@ -325,21 +258,6 @@ static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int wri } -#ifndef SUN3_SCSI_VME -static inline unsigned long sun3scsi_dma_count(struct Scsi_Host *instance) -{ - unsigned short resid; - - dregs->udc_addr = 0x32; - udelay(SUN3_DMA_DELAY); - resid = dregs->udc_data; - udelay(SUN3_DMA_DELAY); - resid *= 2; - - return (unsigned long) resid; -} -#endif - static inline unsigned long sun3scsi_dma_residual(struct Scsi_Host *instance) { return last_residual; @@ -437,7 +355,10 @@ static int sun3scsi_dma_finish(int write_flag) } } - count = sun3scsi_dma_count(default_instance); + dregs->udc_addr = 0x32; + udelay(SUN3_DMA_DELAY); + count = 2 * dregs->udc_data; + udelay(SUN3_DMA_DELAY); fifo = dregs->fifo_count; last_residual = fifo; @@ -502,17 +423,17 @@ static int sun3scsi_dma_finish(int write_flag) static struct scsi_host_template sun3_scsi_template = { .module = THIS_MODULE, .proc_name = DRV_MODULE_NAME, - .show_info = sun3scsi_show_info, .name = SUN3_SCSI_NAME, .info = sun3scsi_info, .queuecommand = sun3scsi_queue_command, - .eh_abort_handler = sun3scsi_abort, - .eh_bus_reset_handler = sun3scsi_bus_reset, + .eh_abort_handler = sun3scsi_abort, + .eh_bus_reset_handler = sun3scsi_bus_reset, .can_queue = 16, .this_id = 7, .sg_tablesize = SG_NONE, .cmd_per_lun = 2, - .use_clustering = DISABLE_CLUSTERING + .use_clustering = DISABLE_CLUSTERING, + .cmd_size = NCR5380_CMD_SIZE, }; static int __init sun3_scsi_probe(struct platform_device *pdev) @@ -591,7 +512,6 @@ static int __init sun3_scsi_probe(struct platform_device *pdev) error = -ENOMEM; goto fail_alloc; } - default_instance = instance; instance->io_port = (unsigned long)ioaddr; instance->irq = irq->start; @@ -600,7 +520,9 @@ static int __init sun3_scsi_probe(struct platform_device *pdev) host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0; #endif - NCR5380_init(instance, host_flags); + error = NCR5380_init(instance, host_flags); + if (error) + goto fail_init; error = request_irq(instance->irq, scsi_sun3_intr, 0, "NCR5380", instance); @@ -631,9 +553,7 @@ static int __init sun3_scsi_probe(struct platform_device *pdev) dregs->ivect = VME_DATA24 | (instance->irq & 0xff); #endif -#ifdef RESET_BOOT - sun3_scsi_reset_boot(instance); -#endif + NCR5380_maybe_reset_bus(instance); error = scsi_add_host(instance, NULL); if (error) @@ -649,6 +569,7 @@ fail_host: free_irq(instance->irq, instance); fail_irq: NCR5380_exit(instance); +fail_init: scsi_host_put(instance); fail_alloc: if (udc_regs) diff --git a/drivers/scsi/t128.c b/drivers/scsi/t128.c index 87828acbf7c6..4615fda60dbd 100644 --- a/drivers/scsi/t128.c +++ b/drivers/scsi/t128.c @@ -68,14 +68,11 @@ * 15 9-11 */ -#include <linux/signal.h> #include <linux/io.h> #include <linux/blkdev.h> #include <linux/interrupt.h> -#include <linux/stat.h> #include <linux/init.h> #include <linux/module.h> -#include <linux/delay.h> #include <scsi/scsi_host.h> #include "t128.h" @@ -126,7 +123,7 @@ static struct signature { static int __init t128_setup(char *str) { - static int commandline_current = 0; + static int commandline_current; int i; int ints[10]; @@ -165,7 +162,7 @@ __setup("t128=", t128_setup); static int __init t128_detect(struct scsi_host_template *tpnt) { - static int current_override = 0, current_base = 0; + static int current_override, current_base; struct Scsi_Host *instance; unsigned long base; void __iomem *p; @@ -182,9 +179,8 @@ static int __init t128_detect(struct scsi_host_template *tpnt) base = 0; } else for (; !base && (current_base < NO_BASES); ++current_base) { -#if (TDEBUG & TDEBUG_INIT) - printk("scsi-t128 : probing address %08x\n", bases[current_base].address); -#endif + dprintk(NDEBUG_INIT, "t128: probing address 0x%08x\n", + bases[current_base].address); if (bases[current_base].noauto) continue; p = ioremap(bases[current_base].address, 0x2000); @@ -195,17 +191,13 @@ static int __init t128_detect(struct scsi_host_template *tpnt) signatures[sig].string, strlen(signatures[sig].string))) { base = bases[current_base].address; -#if (TDEBUG & TDEBUG_INIT) - printk("scsi-t128 : detected board.\n"); -#endif + dprintk(NDEBUG_INIT, "t128: detected board\n"); goto found; } iounmap(p); } -#if defined(TDEBUG) && (TDEBUG & TDEBUG_INIT) - printk("scsi-t128 : base = %08x\n", (unsigned int) base); -#endif + dprintk(NDEBUG_INIT, "t128: base = 0x%08x\n", (unsigned int)base); if (!base) break; @@ -213,12 +205,15 @@ static int __init t128_detect(struct scsi_host_template *tpnt) found: instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata)); if(instance == NULL) - break; - + goto out_unmap; + instance->base = base; ((struct NCR5380_hostdata *)instance->hostdata)->base = p; - NCR5380_init(instance, 0); + if (NCR5380_init(instance, 0)) + goto out_unregister; + + NCR5380_maybe_reset_bus(instance); if (overrides[current_override].irq != IRQ_AUTO) instance->irq = overrides[current_override].irq; @@ -242,27 +237,30 @@ found: printk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no); } -#if defined(TDEBUG) && (TDEBUG & TDEBUG_INIT) - printk("scsi%d : irq = %d\n", instance->host_no, instance->irq); -#endif + dprintk(NDEBUG_INIT, "scsi%d: irq = %d\n", + instance->host_no, instance->irq); ++current_override; ++count; } return count; + +out_unregister: + scsi_unregister(instance); +out_unmap: + iounmap(p); + return count; } static int t128_release(struct Scsi_Host *shost) { - NCR5380_local_declare(); - NCR5380_setup(shost); + struct NCR5380_hostdata *hostdata = shost_priv(shost); + if (shost->irq != NO_IRQ) free_irq(shost->irq, shost); NCR5380_exit(shost); - if (shost->io_port && shost->n_io_port) - release_region(shost->io_port, shost->n_io_port); scsi_unregister(shost); - iounmap(base); + iounmap(hostdata->base); return 0; } @@ -308,14 +306,14 @@ static int t128_biosparam(struct scsi_device *sdev, struct block_device *bdev, * timeout. */ -static inline int NCR5380_pread (struct Scsi_Host *instance, unsigned char *dst, - int len) { - NCR5380_local_declare(); - void __iomem *reg; +static inline int +NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len) +{ + struct NCR5380_hostdata *hostdata = shost_priv(instance); + void __iomem *reg, *base = hostdata->base; unsigned char *d = dst; register int i = len; - NCR5380_setup(instance); reg = base + T_DATA_REG_OFFSET; #if 0 @@ -354,14 +352,14 @@ static inline int NCR5380_pread (struct Scsi_Host *instance, unsigned char *dst, * timeout. */ -static inline int NCR5380_pwrite (struct Scsi_Host *instance, unsigned char *src, - int len) { - NCR5380_local_declare(); - void __iomem *reg; +static inline int +NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len) +{ + struct NCR5380_hostdata *hostdata = shost_priv(instance); + void __iomem *reg, *base = hostdata->base; unsigned char *s = src; register int i = len; - NCR5380_setup(instance); reg = base + T_DATA_REG_OFFSET; #if 0 @@ -392,21 +390,23 @@ MODULE_LICENSE("GPL"); #include "NCR5380.c" static struct scsi_host_template driver_template = { - .name = "Trantor T128/T128F/T228", - .detect = t128_detect, - .release = t128_release, - .proc_name = "t128", - .show_info = t128_show_info, - .write_info = t128_write_info, - .info = t128_info, - .queuecommand = t128_queue_command, - .eh_abort_handler = t128_abort, - .eh_bus_reset_handler = t128_bus_reset, - .bios_param = t128_biosparam, - .can_queue = CAN_QUEUE, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = CMD_PER_LUN, - .use_clustering = DISABLE_CLUSTERING, + .name = "Trantor T128/T128F/T228", + .detect = t128_detect, + .release = t128_release, + .proc_name = "t128", + .show_info = t128_show_info, + .write_info = t128_write_info, + .info = t128_info, + .queuecommand = t128_queue_command, + .eh_abort_handler = t128_abort, + .eh_bus_reset_handler = t128_bus_reset, + .bios_param = t128_biosparam, + .can_queue = 32, + .this_id = 7, + .sg_tablesize = SG_ALL, + .cmd_per_lun = 2, + .use_clustering = DISABLE_CLUSTERING, + .cmd_size = NCR5380_CMD_SIZE, + .max_sectors = 128, }; #include "scsi_module.c" diff --git a/drivers/scsi/t128.h b/drivers/scsi/t128.h index 2c7371454dfd..dd16d85497e1 100644 --- a/drivers/scsi/t128.h +++ b/drivers/scsi/t128.h @@ -23,10 +23,6 @@ #ifndef T128_H #define T128_H -#define TDEBUG 0 -#define TDEBUG_INIT 0x1 -#define TDEBUG_TRANSFER 0x2 - /* * The trantor boards are memory mapped. They use an NCR5380 or * equivalent (my sample board had part second sourced from ZILOG). @@ -71,44 +67,18 @@ #define T_DATA_REG_OFFSET 0x1e00 /* rw 512 bytes long */ -#ifndef ASM - -#ifndef CMD_PER_LUN -#define CMD_PER_LUN 2 -#endif - -#ifndef CAN_QUEUE -#define CAN_QUEUE 32 -#endif - #define NCR5380_implementation_fields \ void __iomem *base -#define NCR5380_local_declare() \ - void __iomem *base - -#define NCR5380_setup(instance) \ - base = ((struct NCR5380_hostdata *)(instance->hostdata))->base +#define T128_address(reg) \ + (((struct NCR5380_hostdata *)shost_priv(instance))->base + T_5380_OFFSET + ((reg) * 0x20)) -#define T128_address(reg) (base + T_5380_OFFSET + ((reg) * 0x20)) - -#if !(TDEBUG & TDEBUG_TRANSFER) #define NCR5380_read(reg) readb(T128_address(reg)) #define NCR5380_write(reg, value) writeb((value),(T128_address(reg))) -#else -#define NCR5380_read(reg) \ - (((unsigned char) printk("scsi%d : read register %d at address %08x\n"\ - , instance->hostno, (reg), T128_address(reg))), readb(T128_address(reg))) - -#define NCR5380_write(reg, value) { \ - printk("scsi%d : write %02x to register %d at address %08x\n", \ - instance->hostno, (value), (reg), T128_address(reg)); \ - writeb((value), (T128_address(reg))); \ -} -#endif + +#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize) #define NCR5380_intr t128_intr -#define do_NCR5380_intr do_t128_intr #define NCR5380_queue_command t128_queue_command #define NCR5380_abort t128_abort #define NCR5380_bus_reset t128_bus_reset @@ -121,5 +91,4 @@ #define T128_IRQS 0xc4a8 -#endif /* ndef ASM */ #endif /* T128_H */ diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig index fb2b3935b658..88260205a261 100644 --- a/drivers/soc/Kconfig +++ b/drivers/soc/Kconfig @@ -7,6 +7,7 @@ source "drivers/soc/mediatek/Kconfig" source "drivers/soc/qcom/Kconfig" source "drivers/soc/rockchip/Kconfig" source "drivers/soc/sunxi/Kconfig" +source "drivers/soc/tegra/Kconfig" source "drivers/soc/ti/Kconfig" source "drivers/soc/versatile/Kconfig" diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c index 0ad66fa9bb1a..5548a31e1a39 100644 --- a/drivers/soc/qcom/spm.c +++ b/drivers/soc/qcom/spm.c @@ -288,7 +288,7 @@ static struct spm_driver_data *spm_get_drv(struct platform_device *pdev, struct spm_driver_data *drv = NULL; struct device_node *cpu_node, *saw_node; int cpu; - bool found; + bool found = 0; for_each_possible_cpu(cpu) { cpu_node = of_cpu_device_node_get(cpu); diff --git a/drivers/soc/tegra/Kconfig b/drivers/soc/tegra/Kconfig new file mode 100644 index 000000000000..d0c3c3e085e3 --- /dev/null +++ b/drivers/soc/tegra/Kconfig @@ -0,0 +1,83 @@ +if ARCH_TEGRA + +# 32-bit ARM SoCs +if ARM + +config ARCH_TEGRA_2x_SOC + bool "Enable support for Tegra20 family" + select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP + select ARM_ERRATA_720789 + select ARM_ERRATA_754327 if SMP + select ARM_ERRATA_764369 if SMP + select PINCTRL_TEGRA20 + select PL310_ERRATA_727915 if CACHE_L2X0 + select PL310_ERRATA_769419 if CACHE_L2X0 + select TEGRA_TIMER + help + Support for NVIDIA Tegra AP20 and T20 processors, based on the + ARM CortexA9MP CPU and the ARM PL310 L2 cache controller + +config ARCH_TEGRA_3x_SOC + bool "Enable support for Tegra30 family" + select ARM_ERRATA_754322 + select ARM_ERRATA_764369 if SMP + select PINCTRL_TEGRA30 + select PL310_ERRATA_769419 if CACHE_L2X0 + select TEGRA_TIMER + help + Support for NVIDIA Tegra T30 processor family, based on the + ARM CortexA9MP CPU and the ARM PL310 L2 cache controller + +config ARCH_TEGRA_114_SOC + bool "Enable support for Tegra114 family" + select ARM_ERRATA_798181 if SMP + select ARM_L1_CACHE_SHIFT_6 + select HAVE_ARM_ARCH_TIMER + select PINCTRL_TEGRA114 + select TEGRA_TIMER + help + Support for NVIDIA Tegra T114 processor family, based on the + ARM CortexA15MP CPU + +config ARCH_TEGRA_124_SOC + bool "Enable support for Tegra124 family" + select ARM_L1_CACHE_SHIFT_6 + select HAVE_ARM_ARCH_TIMER + select PINCTRL_TEGRA124 + select TEGRA_TIMER + help + Support for NVIDIA Tegra T124 processor family, based on the + ARM CortexA15MP CPU + +endif + +# 64-bit ARM SoCs +if ARM64 + +config ARCH_TEGRA_132_SOC + bool "NVIDIA Tegra132 SoC" + select PINCTRL_TEGRA124 + help + Enable support for NVIDIA Tegra132 SoC, based on the Denver + ARMv8 CPU. The Tegra132 SoC is similar to the Tegra124 SoC, + but contains an NVIDIA Denver CPU complex in place of + Tegra124's "4+1" Cortex-A15 CPU complex. + +config ARCH_TEGRA_210_SOC + bool "NVIDIA Tegra210 SoC" + select PINCTRL_TEGRA210 + help + Enable support for the NVIDIA Tegra210 SoC. Also known as Tegra X1, + the Tegra210 has four Cortex-A57 cores paired with four Cortex-A53 + cores in a switched configuration. It features a GPU of the Maxwell + architecture with support for DX11, SM4, OpenGL 4.5, OpenGL ES 3.1 + and providing 256 CUDA cores. It supports hardware-accelerated en- + and decoding of various video standards including H.265, H.264 and + VP8 at 4K resolution and up to 60 fps. + + Besides the multimedia features it also comes with a variety of I/O + controllers, such as GPIO, I2C, SPI, SDHCI, PCIe, SATA and XHCI, to + name only a few. + +endif +endif diff --git a/drivers/staging/lustre/include/linux/libcfs/libcfs_private.h b/drivers/staging/lustre/include/linux/libcfs/libcfs_private.h index d6273e143324..a80d993b882e 100644 --- a/drivers/staging/lustre/include/linux/libcfs/libcfs_private.h +++ b/drivers/staging/lustre/include/linux/libcfs/libcfs_private.h @@ -151,16 +151,12 @@ do { \ #define LIBCFS_FREE(ptr, size) \ do { \ - int s = (size); \ if (unlikely((ptr) == NULL)) { \ CERROR("LIBCFS: free NULL '" #ptr "' (%d bytes) at " \ - "%s:%d\n", s, __FILE__, __LINE__); \ + "%s:%d\n", (int)(size), __FILE__, __LINE__); \ break; \ } \ - if (unlikely(s > LIBCFS_VMALLOC_SIZE)) \ - vfree(ptr); \ - else \ - kfree(ptr); \ + kvfree(ptr); \ } while (0) /******************************************************************************/ diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index daa563ff1fa0..1f117c360ebb 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -229,6 +229,8 @@ config USB_EHCI_TEGRA depends on ARCH_TEGRA select USB_EHCI_ROOT_HUB_TT select USB_PHY + select USB_ULPI + select USB_ULPI_VIEWPORT help This driver enables support for the internal USB Host Controllers found in NVIDIA Tegra SoCs. The controllers are EHCI compliant. diff --git a/fs/block_dev.c b/fs/block_dev.c index 2c3aeab17e20..7b9cd49622b1 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -75,7 +75,7 @@ void kill_bdev(struct block_device *bdev) { struct address_space *mapping = bdev->bd_inode->i_mapping; - if (mapping->nrpages == 0 && mapping->nrshadows == 0) + if (mapping->nrpages == 0 && mapping->nrexceptional == 0) return; invalidate_bh_lrus(); diff --git a/fs/coda/coda_linux.h b/fs/coda/coda_linux.h index f829fe963f5b..5104d84c4f64 100644 --- a/fs/coda/coda_linux.h +++ b/fs/coda/coda_linux.h @@ -72,8 +72,7 @@ void coda_sysctl_clean(void); } while (0) -#define CODA_FREE(ptr,size) \ - do { if (size < PAGE_SIZE) kfree((ptr)); else vfree((ptr)); } while (0) +#define CODA_FREE(ptr, size) kvfree((ptr)) /* inode to cnode access functions */ @@ -24,6 +24,7 @@ #include <linux/memcontrol.h> #include <linux/mm.h> #include <linux/mutex.h> +#include <linux/pagevec.h> #include <linux/pmem.h> #include <linux/sched.h> #include <linux/uio.h> @@ -245,6 +246,7 @@ ssize_t dax_do_io(struct kiocb *iocb, struct inode *inode, loff_t end = pos + iov_iter_count(iter); memset(&bh, 0, sizeof(bh)); + bh.b_bdev = inode->i_sb->s_bdev; if ((flags & DIO_LOCKING) && iov_iter_rw(iter) == READ) { struct address_space *mapping = inode->i_mapping; @@ -324,6 +326,199 @@ static int copy_user_bh(struct page *to, struct inode *inode, return 0; } +#define NO_SECTOR -1 +#define DAX_PMD_INDEX(page_index) (page_index & (PMD_MASK >> PAGE_CACHE_SHIFT)) + +static int dax_radix_entry(struct address_space *mapping, pgoff_t index, + sector_t sector, bool pmd_entry, bool dirty) +{ + struct radix_tree_root *page_tree = &mapping->page_tree; + pgoff_t pmd_index = DAX_PMD_INDEX(index); + int type, error = 0; + void *entry; + + WARN_ON_ONCE(pmd_entry && !dirty); + __mark_inode_dirty(mapping->host, I_DIRTY_PAGES); + + spin_lock_irq(&mapping->tree_lock); + + entry = radix_tree_lookup(page_tree, pmd_index); + if (entry && RADIX_DAX_TYPE(entry) == RADIX_DAX_PMD) { + index = pmd_index; + goto dirty; + } + + entry = radix_tree_lookup(page_tree, index); + if (entry) { + type = RADIX_DAX_TYPE(entry); + if (WARN_ON_ONCE(type != RADIX_DAX_PTE && + type != RADIX_DAX_PMD)) { + error = -EIO; + goto unlock; + } + + if (!pmd_entry || type == RADIX_DAX_PMD) + goto dirty; + + /* + * We only insert dirty PMD entries into the radix tree. This + * means we don't need to worry about removing a dirty PTE + * entry and inserting a clean PMD entry, thus reducing the + * range we would flush with a follow-up fsync/msync call. + */ + radix_tree_delete(&mapping->page_tree, index); + mapping->nrexceptional--; + } + + if (sector == NO_SECTOR) { + /* + * This can happen during correct operation if our pfn_mkwrite + * fault raced against a hole punch operation. If this + * happens the pte that was hole punched will have been + * unmapped and the radix tree entry will have been removed by + * the time we are called, but the call will still happen. We + * will return all the way up to wp_pfn_shared(), where the + * pte_same() check will fail, eventually causing page fault + * to be retried by the CPU. + */ + goto unlock; + } + + error = radix_tree_insert(page_tree, index, + RADIX_DAX_ENTRY(sector, pmd_entry)); + if (error) + goto unlock; + + mapping->nrexceptional++; + dirty: + if (dirty) + radix_tree_tag_set(page_tree, index, PAGECACHE_TAG_DIRTY); + unlock: + spin_unlock_irq(&mapping->tree_lock); + return error; +} + +static int dax_writeback_one(struct block_device *bdev, + struct address_space *mapping, pgoff_t index, void *entry) +{ + struct radix_tree_root *page_tree = &mapping->page_tree; + int type = RADIX_DAX_TYPE(entry); + struct radix_tree_node *node; + struct blk_dax_ctl dax; + void **slot; + int ret = 0; + + spin_lock_irq(&mapping->tree_lock); + /* + * Regular page slots are stabilized by the page lock even + * without the tree itself locked. These unlocked entries + * need verification under the tree lock. + */ + if (!__radix_tree_lookup(page_tree, index, &node, &slot)) + goto unlock; + if (*slot != entry) + goto unlock; + + /* another fsync thread may have already written back this entry */ + if (!radix_tree_tag_get(page_tree, index, PAGECACHE_TAG_TOWRITE)) + goto unlock; + + if (WARN_ON_ONCE(type != RADIX_DAX_PTE && type != RADIX_DAX_PMD)) { + ret = -EIO; + goto unlock; + } + + dax.sector = RADIX_DAX_SECTOR(entry); + dax.size = (type == RADIX_DAX_PMD ? PMD_SIZE : PAGE_SIZE); + spin_unlock_irq(&mapping->tree_lock); + + /* + * We cannot hold tree_lock while calling dax_map_atomic() because it + * eventually calls cond_resched(). + */ + ret = dax_map_atomic(bdev, &dax); + if (ret < 0) + return ret; + + if (WARN_ON_ONCE(ret < dax.size)) { + ret = -EIO; + goto unmap; + } + + wb_cache_pmem(dax.addr, dax.size); + + spin_lock_irq(&mapping->tree_lock); + radix_tree_tag_clear(page_tree, index, PAGECACHE_TAG_TOWRITE); + spin_unlock_irq(&mapping->tree_lock); + unmap: + dax_unmap_atomic(bdev, &dax); + return ret; + + unlock: + spin_unlock_irq(&mapping->tree_lock); + return ret; +} + +/* + * Flush the mapping to the persistent domain within the byte range of [start, + * end]. This is required by data integrity operations to ensure file data is + * on persistent storage prior to completion of the operation. + */ +int dax_writeback_mapping_range(struct address_space *mapping, loff_t start, + loff_t end) +{ + struct inode *inode = mapping->host; + struct block_device *bdev = inode->i_sb->s_bdev; + pgoff_t start_index, end_index, pmd_index; + pgoff_t indices[PAGEVEC_SIZE]; + struct pagevec pvec; + bool done = false; + int i, ret = 0; + void *entry; + + if (WARN_ON_ONCE(inode->i_blkbits != PAGE_SHIFT)) + return -EIO; + + start_index = start >> PAGE_CACHE_SHIFT; + end_index = end >> PAGE_CACHE_SHIFT; + pmd_index = DAX_PMD_INDEX(start_index); + + rcu_read_lock(); + entry = radix_tree_lookup(&mapping->page_tree, pmd_index); + rcu_read_unlock(); + + /* see if the start of our range is covered by a PMD entry */ + if (entry && RADIX_DAX_TYPE(entry) == RADIX_DAX_PMD) + start_index = pmd_index; + + tag_pages_for_writeback(mapping, start_index, end_index); + + pagevec_init(&pvec, 0); + while (!done) { + pvec.nr = find_get_entries_tag(mapping, start_index, + PAGECACHE_TAG_TOWRITE, PAGEVEC_SIZE, + pvec.pages, indices); + + if (pvec.nr == 0) + break; + + for (i = 0; i < pvec.nr; i++) { + if (indices[i] > end_index) { + done = true; + break; + } + + ret = dax_writeback_one(bdev, mapping, indices[i], + pvec.pages[i]); + if (ret < 0) + return ret; + } + } + wmb_pmem(); + return 0; +} +EXPORT_SYMBOL_GPL(dax_writeback_mapping_range); + static int dax_insert_mapping(struct inode *inode, struct buffer_head *bh, struct vm_area_struct *vma, struct vm_fault *vmf) { @@ -363,6 +558,11 @@ static int dax_insert_mapping(struct inode *inode, struct buffer_head *bh, } dax_unmap_atomic(bdev, &dax); + error = dax_radix_entry(mapping, vmf->pgoff, dax.sector, false, + vmf->flags & FAULT_FLAG_WRITE); + if (error) + goto out; + error = vm_insert_mixed(vma, vaddr, dax.pfn); out: @@ -408,6 +608,7 @@ int __dax_fault(struct vm_area_struct *vma, struct vm_fault *vmf, memset(&bh, 0, sizeof(bh)); block = (sector_t)vmf->pgoff << (PAGE_SHIFT - blkbits); + bh.b_bdev = inode->i_sb->s_bdev; bh.b_size = PAGE_SIZE; repeat: @@ -487,6 +688,7 @@ int __dax_fault(struct vm_area_struct *vma, struct vm_fault *vmf, delete_from_page_cache(page); unlock_page(page); page_cache_release(page); + page = NULL; } /* @@ -590,7 +792,8 @@ int __dax_pmd_fault(struct vm_area_struct *vma, unsigned long address, struct block_device *bdev; pgoff_t size, pgoff; sector_t block; - int result = 0; + int error, result = 0; + bool alloc = false; /* dax pmd mappings require pfn_t_devmap() */ if (!IS_ENABLED(CONFIG_FS_DAX_PMD)) @@ -624,13 +827,21 @@ int __dax_pmd_fault(struct vm_area_struct *vma, unsigned long address, } memset(&bh, 0, sizeof(bh)); + bh.b_bdev = inode->i_sb->s_bdev; block = (sector_t)pgoff << (PAGE_SHIFT - blkbits); bh.b_size = PMD_SIZE; - if (get_block(inode, block, &bh, write) != 0) + + if (get_block(inode, block, &bh, 0) != 0) return VM_FAULT_SIGBUS; + + if (!buffer_mapped(&bh) && write) { + if (get_block(inode, block, &bh, 1) != 0) + return VM_FAULT_SIGBUS; + alloc = true; + } + bdev = bh.b_bdev; - i_mmap_lock_read(mapping); /* * If the filesystem isn't willing to tell us the length of a hole, @@ -639,19 +850,22 @@ int __dax_pmd_fault(struct vm_area_struct *vma, unsigned long address, */ if (!buffer_size_valid(&bh) || bh.b_size < PMD_SIZE) { dax_pmd_dbg(&bh, address, "allocated block too small"); - goto fallback; + return VM_FAULT_FALLBACK; } /* * If we allocated new storage, make sure no process has any * zero pages covering this hole */ - if (buffer_new(&bh)) { - i_mmap_unlock_read(mapping); - unmap_mapping_range(mapping, pgoff << PAGE_SHIFT, PMD_SIZE, 0); - i_mmap_lock_read(mapping); + if (alloc) { + loff_t lstart = pgoff << PAGE_SHIFT; + loff_t lend = lstart + PMD_SIZE - 1; /* inclusive */ + + truncate_pagecache_range(inode, lstart, lend); } + i_mmap_lock_read(mapping); + /* * If a truncate happened while we were allocating blocks, we may * leave blocks allocated to the file that are beyond EOF. We can't @@ -664,7 +878,8 @@ int __dax_pmd_fault(struct vm_area_struct *vma, unsigned long address, goto out; } if ((pgoff | PG_PMD_COLOUR) >= size) { - dax_pmd_dbg(&bh, address, "pgoff unaligned"); + dax_pmd_dbg(&bh, address, + "offset + huge page size > file size"); goto fallback; } @@ -732,6 +947,31 @@ int __dax_pmd_fault(struct vm_area_struct *vma, unsigned long address, } dax_unmap_atomic(bdev, &dax); + /* + * For PTE faults we insert a radix tree entry for reads, and + * leave it clean. Then on the first write we dirty the radix + * tree entry via the dax_pfn_mkwrite() path. This sequence + * allows the dax_pfn_mkwrite() call to be simpler and avoid a + * call into get_block() to translate the pgoff to a sector in + * order to be able to create a new radix tree entry. + * + * The PMD path doesn't have an equivalent to + * dax_pfn_mkwrite(), though, so for a read followed by a + * write we traverse all the way through __dax_pmd_fault() + * twice. This means we can just skip inserting a radix tree + * entry completely on the initial read and just wait until + * the write to insert a dirty entry. + */ + if (write) { + error = dax_radix_entry(mapping, pgoff, dax.sector, + true, true); + if (error) { + dax_pmd_dbg(&bh, address, + "PMD radix insertion failed"); + goto fallback; + } + } + dev_dbg(part_to_dev(bdev->bd_part), "%s: %s addr: %lx pfn: %lx sect: %llx\n", __func__, current->comm, address, @@ -790,15 +1030,20 @@ EXPORT_SYMBOL_GPL(dax_pmd_fault); * dax_pfn_mkwrite - handle first write to DAX page * @vma: The virtual memory area where the fault occurred * @vmf: The description of the fault - * */ int dax_pfn_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf) { - struct super_block *sb = file_inode(vma->vm_file)->i_sb; + struct file *file = vma->vm_file; - sb_start_pagefault(sb); - file_update_time(vma->vm_file); - sb_end_pagefault(sb); + /* + * We pass NO_SECTOR to dax_radix_entry() because we expect that a + * RADIX_DAX_PTE entry already exists in the radix tree from a + * previous call to __dax_fault(). We just want to look up that PTE + * entry using vmf->pgoff and make sure the dirty tag is set. This + * saves us from having to make a call to get_block() here to look + * up the sector. + */ + dax_radix_entry(file->f_mapping, vmf->pgoff, NO_SECTOR, false, true); return VM_FAULT_NOPAGE; } EXPORT_SYMBOL_GPL(dax_pfn_mkwrite); @@ -835,6 +1080,7 @@ int dax_zero_page_range(struct inode *inode, loff_t from, unsigned length, BUG_ON((offset + length) > PAGE_CACHE_SIZE); memset(&bh, 0, sizeof(bh)); + bh.b_bdev = inode->i_sb->s_bdev; bh.b_size = PAGE_CACHE_SIZE; err = get_block(inode, index, &bh, 0); if (err < 0) diff --git a/fs/ext2/file.c b/fs/ext2/file.c index 11a42c5a09ae..2c88d683cd91 100644 --- a/fs/ext2/file.c +++ b/fs/ext2/file.c @@ -102,8 +102,8 @@ static int ext2_dax_pfn_mkwrite(struct vm_area_struct *vma, { struct inode *inode = file_inode(vma->vm_file); struct ext2_inode_info *ei = EXT2_I(inode); - int ret = VM_FAULT_NOPAGE; loff_t size; + int ret; sb_start_pagefault(inode->i_sb); file_update_time(vma->vm_file); @@ -113,6 +113,8 @@ static int ext2_dax_pfn_mkwrite(struct vm_area_struct *vma, size = (i_size_read(inode) + PAGE_SIZE - 1) >> PAGE_SHIFT; if (vmf->pgoff >= size) ret = VM_FAULT_SIGBUS; + else + ret = dax_pfn_mkwrite(vma, vmf); up_read(&ei->dax_sem); sb_end_pagefault(inode->i_sb); diff --git a/fs/ext4/file.c b/fs/ext4/file.c index 8eb87e3e2752..1126436dada1 100644 --- a/fs/ext4/file.c +++ b/fs/ext4/file.c @@ -291,8 +291,8 @@ static int ext4_dax_pfn_mkwrite(struct vm_area_struct *vma, { struct inode *inode = file_inode(vma->vm_file); struct super_block *sb = inode->i_sb; - int ret = VM_FAULT_NOPAGE; loff_t size; + int ret; sb_start_pagefault(sb); file_update_time(vma->vm_file); @@ -300,6 +300,8 @@ static int ext4_dax_pfn_mkwrite(struct vm_area_struct *vma, size = (i_size_read(inode) + PAGE_SIZE - 1) >> PAGE_SHIFT; if (vmf->pgoff >= size) ret = VM_FAULT_SIGBUS; + else + ret = dax_pfn_mkwrite(vma, vmf); up_read(&EXT4_I(inode)->i_mmap_sem); sb_end_pagefault(sb); diff --git a/fs/inode.c b/fs/inode.c index bb8685220292..9f62db3bcc3e 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -495,7 +495,7 @@ void clear_inode(struct inode *inode) */ spin_lock_irq(&inode->i_data.tree_lock); BUG_ON(inode->i_data.nrpages); - BUG_ON(inode->i_data.nrshadows); + BUG_ON(inode->i_data.nrexceptional); spin_unlock_irq(&inode->i_data.tree_lock); BUG_ON(!list_empty(&inode->i_data.private_list)); BUG_ON(!(inode->i_state & I_FREEING)); diff --git a/fs/jffs2/build.c b/fs/jffs2/build.c index a3750f902adc..0ae91ad6df2d 100644 --- a/fs/jffs2/build.c +++ b/fs/jffs2/build.c @@ -17,6 +17,7 @@ #include <linux/slab.h> #include <linux/vmalloc.h> #include <linux/mtd/mtd.h> +#include <linux/mm.h> /* kvfree() */ #include "nodelist.h" static void jffs2_build_remove_unlinked_inode(struct jffs2_sb_info *, @@ -383,12 +384,7 @@ int jffs2_do_mount_fs(struct jffs2_sb_info *c) return 0; out_free: -#ifndef __ECOS - if (jffs2_blocks_use_vmalloc(c)) - vfree(c->blocks); - else -#endif - kfree(c->blocks); + kvfree(c->blocks); return ret; } diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c index 2caf1682036d..bead25ae8fe4 100644 --- a/fs/jffs2/fs.c +++ b/fs/jffs2/fs.c @@ -596,10 +596,7 @@ int jffs2_do_fill_super(struct super_block *sb, void *data, int silent) out_root: jffs2_free_ino_caches(c); jffs2_free_raw_node_refs(c); - if (jffs2_blocks_use_vmalloc(c)) - vfree(c->blocks); - else - kfree(c->blocks); + kvfree(c->blocks); out_inohash: jffs2_clear_xattr_subsystem(c); kfree(c->inocache_list); diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c index bb080c272149..0a9a114bb9d1 100644 --- a/fs/jffs2/super.c +++ b/fs/jffs2/super.c @@ -331,10 +331,7 @@ static void jffs2_put_super (struct super_block *sb) jffs2_free_ino_caches(c); jffs2_free_raw_node_refs(c); - if (jffs2_blocks_use_vmalloc(c)) - vfree(c->blocks); - else - kfree(c->blocks); + kvfree(c->blocks); jffs2_flash_cleanup(c); kfree(c->inocache_list); jffs2_clear_xattr_subsystem(c); diff --git a/fs/nfs/filelayout/filelayout.c b/fs/nfs/filelayout/filelayout.c index bb1f4e7a3270..3384dc8e6683 100644 --- a/fs/nfs/filelayout/filelayout.c +++ b/fs/nfs/filelayout/filelayout.c @@ -971,7 +971,7 @@ filelayout_mark_request_commit(struct nfs_page *req, u32 i, j; if (fl->commit_through_mds) { - nfs_request_add_commit_list(req, &cinfo->mds->list, cinfo); + nfs_request_add_commit_list(req, cinfo); } else { /* Note that we are calling nfs4_fl_calc_j_index on each page * that ends up being committed to a data server. An attractive diff --git a/fs/nfs/flexfilelayout/flexfilelayout.c b/fs/nfs/flexfilelayout/flexfilelayout.c index 6594e9f903a0..5bcd92d50e82 100644 --- a/fs/nfs/flexfilelayout/flexfilelayout.c +++ b/fs/nfs/flexfilelayout/flexfilelayout.c @@ -1948,11 +1948,9 @@ ff_layout_encode_layoutreturn(struct pnfs_layout_hdr *lo, start = xdr_reserve_space(xdr, 4); BUG_ON(!start); - if (ff_layout_encode_ioerr(flo, xdr, args)) - goto out; - + ff_layout_encode_ioerr(flo, xdr, args); ff_layout_encode_iostats(flo, xdr, args); -out: + *start = cpu_to_be32((xdr->p - start - 1) * 4); dprintk("%s: Return\n", __func__); } diff --git a/fs/nfs/flexfilelayout/flexfilelayoutdev.c b/fs/nfs/flexfilelayout/flexfilelayoutdev.c index bd0327541366..29898a9550fa 100644 --- a/fs/nfs/flexfilelayout/flexfilelayoutdev.c +++ b/fs/nfs/flexfilelayout/flexfilelayoutdev.c @@ -218,63 +218,55 @@ static void extend_ds_error(struct nfs4_ff_layout_ds_err *err, err->length = end - err->offset; } -static bool ds_error_can_merge(struct nfs4_ff_layout_ds_err *err, u64 offset, - u64 length, int status, enum nfs_opnum4 opnum, - nfs4_stateid *stateid, - struct nfs4_deviceid *deviceid) +static int +ff_ds_error_match(const struct nfs4_ff_layout_ds_err *e1, + const struct nfs4_ff_layout_ds_err *e2) { - return err->status == status && err->opnum == opnum && - nfs4_stateid_match(&err->stateid, stateid) && - !memcmp(&err->deviceid, deviceid, sizeof(*deviceid)) && - end_offset(err->offset, err->length) >= offset && - err->offset <= end_offset(offset, length); -} - -static bool merge_ds_error(struct nfs4_ff_layout_ds_err *old, - struct nfs4_ff_layout_ds_err *new) -{ - if (!ds_error_can_merge(old, new->offset, new->length, new->status, - new->opnum, &new->stateid, &new->deviceid)) - return false; - - extend_ds_error(old, new->offset, new->length); - return true; + int ret; + + if (e1->opnum != e2->opnum) + return e1->opnum < e2->opnum ? -1 : 1; + if (e1->status != e2->status) + return e1->status < e2->status ? -1 : 1; + ret = memcmp(&e1->stateid, &e2->stateid, sizeof(e1->stateid)); + if (ret != 0) + return ret; + ret = memcmp(&e1->deviceid, &e2->deviceid, sizeof(e1->deviceid)); + if (ret != 0) + return ret; + if (end_offset(e1->offset, e1->length) < e2->offset) + return -1; + if (e1->offset > end_offset(e2->offset, e2->length)) + return 1; + /* If ranges overlap or are contiguous, they are the same */ + return 0; } -static bool +static void ff_layout_add_ds_error_locked(struct nfs4_flexfile_layout *flo, struct nfs4_ff_layout_ds_err *dserr) { - struct nfs4_ff_layout_ds_err *err; - - list_for_each_entry(err, &flo->error_list, list) { - if (merge_ds_error(err, dserr)) { - return true; - } - } - - list_add(&dserr->list, &flo->error_list); - return false; -} - -static bool -ff_layout_update_ds_error(struct nfs4_flexfile_layout *flo, u64 offset, - u64 length, int status, enum nfs_opnum4 opnum, - nfs4_stateid *stateid, struct nfs4_deviceid *deviceid) -{ - bool found = false; - struct nfs4_ff_layout_ds_err *err; - - list_for_each_entry(err, &flo->error_list, list) { - if (ds_error_can_merge(err, offset, length, status, opnum, - stateid, deviceid)) { - found = true; - extend_ds_error(err, offset, length); + struct nfs4_ff_layout_ds_err *err, *tmp; + struct list_head *head = &flo->error_list; + int match; + + /* Do insertion sort w/ merges */ + list_for_each_entry_safe(err, tmp, &flo->error_list, list) { + match = ff_ds_error_match(err, dserr); + if (match < 0) + continue; + if (match > 0) { + /* Add entry "dserr" _before_ entry "err" */ + head = &err->list; break; } + /* Entries match, so merge "err" into "dserr" */ + extend_ds_error(dserr, err->offset, err->length); + list_del(&err->list); + kfree(err); } - return found; + list_add_tail(&dserr->list, head); } int ff_layout_track_ds_error(struct nfs4_flexfile_layout *flo, @@ -283,7 +275,6 @@ int ff_layout_track_ds_error(struct nfs4_flexfile_layout *flo, gfp_t gfp_flags) { struct nfs4_ff_layout_ds_err *dserr; - bool needfree; if (status == 0) return 0; @@ -291,14 +282,6 @@ int ff_layout_track_ds_error(struct nfs4_flexfile_layout *flo, if (mirror->mirror_ds == NULL) return -EINVAL; - spin_lock(&flo->generic_hdr.plh_inode->i_lock); - if (ff_layout_update_ds_error(flo, offset, length, status, opnum, - &mirror->stateid, - &mirror->mirror_ds->id_node.deviceid)) { - spin_unlock(&flo->generic_hdr.plh_inode->i_lock); - return 0; - } - spin_unlock(&flo->generic_hdr.plh_inode->i_lock); dserr = kmalloc(sizeof(*dserr), gfp_flags); if (!dserr) return -ENOMEM; @@ -313,10 +296,8 @@ int ff_layout_track_ds_error(struct nfs4_flexfile_layout *flo, NFS4_DEVICEID4_SIZE); spin_lock(&flo->generic_hdr.plh_inode->i_lock); - needfree = ff_layout_add_ds_error_locked(flo, dserr); + ff_layout_add_ds_error_locked(flo, dserr); spin_unlock(&flo->generic_hdr.plh_inode->i_lock); - if (needfree) - kfree(dserr); return 0; } diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index 4e8cc942336c..9a547aa3ec8e 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -484,7 +484,7 @@ void nfs_retry_commit(struct list_head *page_list, struct nfs_commit_info *cinfo, u32 ds_commit_idx); void nfs_commitdata_release(struct nfs_commit_data *data); -void nfs_request_add_commit_list(struct nfs_page *req, struct list_head *dst, +void nfs_request_add_commit_list(struct nfs_page *req, struct nfs_commit_info *cinfo); void nfs_request_add_commit_list_locked(struct nfs_page *req, struct list_head *dst, diff --git a/fs/nfs/write.c b/fs/nfs/write.c index ce43cd6d88c6..5754835a2886 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -830,11 +830,10 @@ EXPORT_SYMBOL_GPL(nfs_request_add_commit_list_locked); * holding the nfs_page lock. */ void -nfs_request_add_commit_list(struct nfs_page *req, struct list_head *dst, - struct nfs_commit_info *cinfo) +nfs_request_add_commit_list(struct nfs_page *req, struct nfs_commit_info *cinfo) { spin_lock(cinfo->lock); - nfs_request_add_commit_list_locked(req, dst, cinfo); + nfs_request_add_commit_list_locked(req, &cinfo->mds->list, cinfo); spin_unlock(cinfo->lock); nfs_mark_page_unstable(req->wb_page, cinfo); } @@ -892,7 +891,7 @@ nfs_mark_request_commit(struct nfs_page *req, struct pnfs_layout_segment *lseg, { if (pnfs_mark_request_commit(req, lseg, cinfo, ds_commit_idx)) return; - nfs_request_add_commit_list(req, &cinfo->mds->list, cinfo); + nfs_request_add_commit_list(req, cinfo); } static void diff --git a/fs/udf/super.c b/fs/udf/super.c index 0fbb4c7c72e8..a522c15a0bfd 100644 --- a/fs/udf/super.c +++ b/fs/udf/super.c @@ -279,17 +279,12 @@ static void udf_sb_free_bitmap(struct udf_bitmap *bitmap) { int i; int nr_groups = bitmap->s_nr_groups; - int size = sizeof(struct udf_bitmap) + (sizeof(struct buffer_head *) * - nr_groups); for (i = 0; i < nr_groups; i++) if (bitmap->s_block_bitmap[i]) brelse(bitmap->s_block_bitmap[i]); - if (size <= PAGE_SIZE) - kfree(bitmap); - else - vfree(bitmap); + kvfree(bitmap); } static void udf_free_partition(struct udf_part_map *map) diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c index bb2b8f354041..52883ac3cf84 100644 --- a/fs/xfs/xfs_file.c +++ b/fs/xfs/xfs_file.c @@ -1610,9 +1610,8 @@ xfs_filemap_pmd_fault( /* * pfn_mkwrite was originally inteneded to ensure we capture time stamp * updates on write faults. In reality, it's need to serialise against - * truncate similar to page_mkwrite. Hence we open-code dax_pfn_mkwrite() - * here and cycle the XFS_MMAPLOCK_SHARED to ensure we serialise the fault - * barrier in place. + * truncate similar to page_mkwrite. Hence we cycle the XFS_MMAPLOCK_SHARED + * to ensure we serialise the fault barrier in place. */ static int xfs_filemap_pfn_mkwrite( @@ -1635,6 +1634,8 @@ xfs_filemap_pfn_mkwrite( size = (i_size_read(inode) + PAGE_SIZE - 1) >> PAGE_SHIFT; if (vmf->pgoff >= size) ret = VM_FAULT_SIGBUS; + else if (IS_DAX(inode)) + ret = dax_pfn_mkwrite(vma, vmf); xfs_iunlock(ip, XFS_MMAPLOCK_SHARED); sb_end_pagefault(inode->i_sb); return ret; diff --git a/include/crypto/hash.h b/include/crypto/hash.h index 3d69c93d50e8..6361892ea737 100644 --- a/include/crypto/hash.h +++ b/include/crypto/hash.h @@ -204,6 +204,7 @@ struct crypto_ahash { unsigned int keylen); unsigned int reqsize; + bool has_setkey; struct crypto_tfm base; }; @@ -375,6 +376,11 @@ static inline void *ahash_request_ctx(struct ahash_request *req) int crypto_ahash_setkey(struct crypto_ahash *tfm, const u8 *key, unsigned int keylen); +static inline bool crypto_ahash_has_setkey(struct crypto_ahash *tfm) +{ + return tfm->has_setkey; +} + /** * crypto_ahash_finup() - update and finalize message digest * @req: reference to the ahash_request handle that holds all information diff --git a/include/crypto/if_alg.h b/include/crypto/if_alg.h index 018afb264ac2..a2bfd7843f18 100644 --- a/include/crypto/if_alg.h +++ b/include/crypto/if_alg.h @@ -30,6 +30,9 @@ struct alg_sock { struct sock *parent; + unsigned int refcnt; + unsigned int nokey_refcnt; + const struct af_alg_type *type; void *private; }; @@ -50,9 +53,11 @@ struct af_alg_type { void (*release)(void *private); int (*setkey)(void *private, const u8 *key, unsigned int keylen); int (*accept)(void *private, struct sock *sk); + int (*accept_nokey)(void *private, struct sock *sk); int (*setauthsize)(void *private, unsigned int authsize); struct proto_ops *ops; + struct proto_ops *ops_nokey; struct module *owner; char name[14]; }; @@ -67,6 +72,7 @@ int af_alg_register_type(const struct af_alg_type *type); int af_alg_unregister_type(const struct af_alg_type *type); int af_alg_release(struct socket *sock); +void af_alg_release_parent(struct sock *sk); int af_alg_accept(struct sock *sk, struct socket *newsock); int af_alg_make_sg(struct af_alg_sgl *sgl, struct iov_iter *iter, int len); @@ -83,11 +89,6 @@ static inline struct alg_sock *alg_sk(struct sock *sk) return (struct alg_sock *)sk; } -static inline void af_alg_release_parent(struct sock *sk) -{ - sock_put(alg_sk(sk)->parent); -} - static inline void af_alg_init_completion(struct af_alg_completion *completion) { init_completion(&completion->completion); diff --git a/include/crypto/skcipher.h b/include/crypto/skcipher.h index d8dd41fb034f..fd8742a40ff3 100644 --- a/include/crypto/skcipher.h +++ b/include/crypto/skcipher.h @@ -61,6 +61,8 @@ struct crypto_skcipher { unsigned int ivsize; unsigned int reqsize; + bool has_setkey; + struct crypto_tfm base; }; @@ -305,6 +307,11 @@ static inline int crypto_skcipher_setkey(struct crypto_skcipher *tfm, return tfm->setkey(tfm, key, keylen); } +static inline bool crypto_skcipher_has_setkey(struct crypto_skcipher *tfm) +{ + return tfm->has_setkey; +} + /** * crypto_skcipher_reqtfm() - obtain cipher handle from request * @req: skcipher_request out of which the cipher handle is to be obtained diff --git a/include/linux/dax.h b/include/linux/dax.h index b415e521528d..8204c3dc3800 100644 --- a/include/linux/dax.h +++ b/include/linux/dax.h @@ -36,4 +36,11 @@ static inline bool vma_is_dax(struct vm_area_struct *vma) { return vma->vm_file && IS_DAX(vma->vm_file->f_mapping->host); } + +static inline bool dax_mapping(struct address_space *mapping) +{ + return mapping->host && IS_DAX(mapping->host); +} +int dax_writeback_mapping_range(struct address_space *mapping, loff_t start, + loff_t end); #endif diff --git a/include/linux/fs.h b/include/linux/fs.h index 2df6c033c3f5..1a2046275cdf 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -433,7 +433,8 @@ struct address_space { struct rw_semaphore i_mmap_rwsem; /* protect tree, count, list */ /* Protected by tree_lock together with the radix tree */ unsigned long nrpages; /* number of total pages */ - unsigned long nrshadows; /* number of shadow entries */ + /* number of shadow or DAX exceptional entries */ + unsigned long nrexceptional; pgoff_t writeback_index;/* writeback starts here */ const struct address_space_operations *a_ops; /* methods */ unsigned long flags; /* error bits/gfp mask */ diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index 4d08b6c33557..92395a0a7dc5 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -361,6 +361,9 @@ unsigned find_get_pages_contig(struct address_space *mapping, pgoff_t start, unsigned int nr_pages, struct page **pages); unsigned find_get_pages_tag(struct address_space *mapping, pgoff_t *index, int tag, unsigned int nr_pages, struct page **pages); +unsigned find_get_entries_tag(struct address_space *mapping, pgoff_t start, + int tag, unsigned int nr_entries, + struct page **entries, pgoff_t *indices); struct page *grab_cache_page_write_begin(struct address_space *mapping, pgoff_t index, unsigned flags); diff --git a/include/linux/pmem.h b/include/linux/pmem.h index acfea8ce4a07..7c3d11a6b4ad 100644 --- a/include/linux/pmem.h +++ b/include/linux/pmem.h @@ -53,12 +53,18 @@ static inline void arch_clear_pmem(void __pmem *addr, size_t size) { BUG(); } + +static inline void arch_wb_cache_pmem(void __pmem *addr, size_t size) +{ + BUG(); +} #endif /* * Architectures that define ARCH_HAS_PMEM_API must provide * implementations for arch_memcpy_to_pmem(), arch_wmb_pmem(), - * arch_copy_from_iter_pmem(), arch_clear_pmem() and arch_has_wmb_pmem(). + * arch_copy_from_iter_pmem(), arch_clear_pmem(), arch_wb_cache_pmem() + * and arch_has_wmb_pmem(). */ static inline void memcpy_from_pmem(void *dst, void __pmem const *src, size_t size) { @@ -178,4 +184,18 @@ static inline void clear_pmem(void __pmem *addr, size_t size) else default_clear_pmem(addr, size); } + +/** + * wb_cache_pmem - write back processor cache for PMEM memory range + * @addr: virtual start address + * @size: number of bytes to write back + * + * Write back the processor cache range starting at 'addr' for 'size' bytes. + * This function requires explicit ordering with a wmb_pmem() call. + */ +static inline void wb_cache_pmem(void __pmem *addr, size_t size) +{ + if (arch_has_pmem_api()) + arch_wb_cache_pmem(addr, size); +} #endif /* __PMEM_H__ */ diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h index 57e7d87d2d4c..7c88ad156a29 100644 --- a/include/linux/radix-tree.h +++ b/include/linux/radix-tree.h @@ -51,6 +51,15 @@ #define RADIX_TREE_EXCEPTIONAL_ENTRY 2 #define RADIX_TREE_EXCEPTIONAL_SHIFT 2 +#define RADIX_DAX_MASK 0xf +#define RADIX_DAX_SHIFT 4 +#define RADIX_DAX_PTE (0x4 | RADIX_TREE_EXCEPTIONAL_ENTRY) +#define RADIX_DAX_PMD (0x8 | RADIX_TREE_EXCEPTIONAL_ENTRY) +#define RADIX_DAX_TYPE(entry) ((unsigned long)entry & RADIX_DAX_MASK) +#define RADIX_DAX_SECTOR(entry) (((unsigned long)entry >> RADIX_DAX_SHIFT)) +#define RADIX_DAX_ENTRY(sector, pmd) ((void *)((unsigned long)sector << \ + RADIX_DAX_SHIFT | (pmd ? RADIX_DAX_PMD : RADIX_DAX_PTE))) + static inline int radix_tree_is_indirect_ptr(void *ptr) { return (int)((unsigned long)ptr & RADIX_TREE_INDIRECT_PTR); diff --git a/include/sound/timer.h b/include/sound/timer.h index 7990469a44ce..c4d76ff056c6 100644 --- a/include/sound/timer.h +++ b/include/sound/timer.h @@ -104,6 +104,7 @@ struct snd_timer_instance { int event, struct timespec * tstamp, unsigned long resolution); + void (*disconnect)(struct snd_timer_instance *timeri); void *callback_data; unsigned long ticks; /* auto-load ticks when expired */ unsigned long cticks; /* current ticks */ diff --git a/ipc/sem.c b/ipc/sem.c index b471e5a3863d..cddd5b5fde51 100644 --- a/ipc/sem.c +++ b/ipc/sem.c @@ -1493,7 +1493,7 @@ out_rcu_wakeup: wake_up_sem_queue_do(&tasks); out_free: if (sem_io != fast_sem_io) - ipc_free(sem_io, sizeof(ushort)*nsems); + ipc_free(sem_io); return err; } diff --git a/ipc/util.c b/ipc/util.c index 0f401d94b7c6..798cad18dd87 100644 --- a/ipc/util.c +++ b/ipc/util.c @@ -414,17 +414,12 @@ void *ipc_alloc(int size) /** * ipc_free - free ipc space * @ptr: pointer returned by ipc_alloc - * @size: size of block * - * Free a block created with ipc_alloc(). The caller must know the size - * used in the allocation call. + * Free a block created with ipc_alloc(). */ -void ipc_free(void *ptr, int size) +void ipc_free(void *ptr) { - if (size > PAGE_SIZE) - vfree(ptr); - else - kfree(ptr); + kvfree(ptr); } /** diff --git a/ipc/util.h b/ipc/util.h index 3a8a5a0eca62..51f7ca58ac67 100644 --- a/ipc/util.h +++ b/ipc/util.h @@ -118,7 +118,7 @@ int ipcperms(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp, short flg); * both function can sleep */ void *ipc_alloc(int size); -void ipc_free(void *ptr, int size); +void ipc_free(void *ptr); /* * For allocation that need to be freed by RCU. diff --git a/lib/Kconfig b/lib/Kconfig index 5a0c1c83cdf0..435f7315bc89 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -210,9 +210,11 @@ config RANDOM32_SELFTEST # compression support is select'ed if needed # config 842_COMPRESS + select CRC32 tristate config 842_DECOMPRESS + select CRC32 tristate config ZLIB_INFLATE diff --git a/lib/libcrc32c.c b/lib/libcrc32c.c index 31ce853fbfb1..74a54b7f2562 100644 --- a/lib/libcrc32c.c +++ b/lib/libcrc32c.c @@ -75,3 +75,4 @@ module_exit(libcrc32c_mod_fini); MODULE_AUTHOR("Clay Haapala <chaapala@cisco.com>"); MODULE_DESCRIPTION("CRC32c (Castagnoli) calculations"); MODULE_LICENSE("GPL"); +MODULE_SOFTDEP("pre: crc32c"); diff --git a/mm/filemap.c b/mm/filemap.c index 30ab120b33db..bc943867d68c 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -11,6 +11,7 @@ */ #include <linux/export.h> #include <linux/compiler.h> +#include <linux/dax.h> #include <linux/fs.h> #include <linux/uaccess.h> #include <linux/capability.h> @@ -123,9 +124,9 @@ static void page_cache_tree_delete(struct address_space *mapping, __radix_tree_lookup(&mapping->page_tree, page->index, &node, &slot); if (shadow) { - mapping->nrshadows++; + mapping->nrexceptional++; /* - * Make sure the nrshadows update is committed before + * Make sure the nrexceptional update is committed before * the nrpages update so that final truncate racing * with reclaim does not see both counters 0 at the * same time and miss a shadow entry. @@ -481,6 +482,12 @@ int filemap_write_and_wait_range(struct address_space *mapping, { int err = 0; + if (dax_mapping(mapping) && mapping->nrexceptional) { + err = dax_writeback_mapping_range(mapping, lstart, lend); + if (err) + return err; + } + if (mapping->nrpages) { err = __filemap_fdatawrite_range(mapping, lstart, lend, WB_SYNC_ALL); @@ -579,9 +586,13 @@ static int page_cache_tree_insert(struct address_space *mapping, p = radix_tree_deref_slot_protected(slot, &mapping->tree_lock); if (!radix_tree_exceptional_entry(p)) return -EEXIST; + + if (WARN_ON(dax_mapping(mapping))) + return -EINVAL; + if (shadowp) *shadowp = p; - mapping->nrshadows--; + mapping->nrexceptional--; if (node) workingset_node_shadows_dec(node); } @@ -1245,9 +1256,9 @@ repeat: if (radix_tree_deref_retry(page)) goto restart; /* - * A shadow entry of a recently evicted page, - * or a swap entry from shmem/tmpfs. Return - * it without attempting to raise page count. + * A shadow entry of a recently evicted page, a swap + * entry from shmem/tmpfs or a DAX entry. Return it + * without attempting to raise page count. */ goto export; } @@ -1494,6 +1505,74 @@ repeat: } EXPORT_SYMBOL(find_get_pages_tag); +/** + * find_get_entries_tag - find and return entries that match @tag + * @mapping: the address_space to search + * @start: the starting page cache index + * @tag: the tag index + * @nr_entries: the maximum number of entries + * @entries: where the resulting entries are placed + * @indices: the cache indices corresponding to the entries in @entries + * + * Like find_get_entries, except we only return entries which are tagged with + * @tag. + */ +unsigned find_get_entries_tag(struct address_space *mapping, pgoff_t start, + int tag, unsigned int nr_entries, + struct page **entries, pgoff_t *indices) +{ + void **slot; + unsigned int ret = 0; + struct radix_tree_iter iter; + + if (!nr_entries) + return 0; + + rcu_read_lock(); +restart: + radix_tree_for_each_tagged(slot, &mapping->page_tree, + &iter, start, tag) { + struct page *page; +repeat: + page = radix_tree_deref_slot(slot); + if (unlikely(!page)) + continue; + if (radix_tree_exception(page)) { + if (radix_tree_deref_retry(page)) { + /* + * Transient condition which can only trigger + * when entry at index 0 moves out of or back + * to root: none yet gotten, safe to restart. + */ + goto restart; + } + + /* + * A shadow entry of a recently evicted page, a swap + * entry from shmem/tmpfs or a DAX entry. Return it + * without attempting to raise page count. + */ + goto export; + } + if (!page_cache_get_speculative(page)) + goto repeat; + + /* Has the page moved? */ + if (unlikely(page != *slot)) { + page_cache_release(page); + goto repeat; + } +export: + indices[ret] = iter.index; + entries[ret] = page; + if (++ret == nr_entries) + break; + } + rcu_read_unlock(); + return ret; +} +EXPORT_SYMBOL(find_get_entries_tag); + /* * CD/DVDs are error prone. When a medium error occurs, the driver may fail * a _large_ part of the i/o request. Imagine the worst scenario: diff --git a/mm/percpu.c b/mm/percpu.c index 8a943b97a053..998607adf6eb 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -305,16 +305,12 @@ static void *pcpu_mem_zalloc(size_t size) /** * pcpu_mem_free - free memory * @ptr: memory to free - * @size: size of the area * * Free @ptr. @ptr should have been allocated using pcpu_mem_zalloc(). */ -static void pcpu_mem_free(void *ptr, size_t size) +static void pcpu_mem_free(void *ptr) { - if (size <= PAGE_SIZE) - kfree(ptr); - else - vfree(ptr); + kvfree(ptr); } /** @@ -463,8 +459,8 @@ out_unlock: * pcpu_mem_free() might end up calling vfree() which uses * IRQ-unsafe lock and thus can't be called under pcpu_lock. */ - pcpu_mem_free(old, old_size); - pcpu_mem_free(new, new_size); + pcpu_mem_free(old); + pcpu_mem_free(new); return 0; } @@ -732,7 +728,7 @@ static struct pcpu_chunk *pcpu_alloc_chunk(void) chunk->map = pcpu_mem_zalloc(PCPU_DFL_MAP_ALLOC * sizeof(chunk->map[0])); if (!chunk->map) { - pcpu_mem_free(chunk, pcpu_chunk_struct_size); + pcpu_mem_free(chunk); return NULL; } @@ -753,8 +749,8 @@ static void pcpu_free_chunk(struct pcpu_chunk *chunk) { if (!chunk) return; - pcpu_mem_free(chunk->map, chunk->map_alloc * sizeof(chunk->map[0])); - pcpu_mem_free(chunk, pcpu_chunk_struct_size); + pcpu_mem_free(chunk->map); + pcpu_mem_free(chunk); } /** diff --git a/mm/truncate.c b/mm/truncate.c index 76e35ad97102..e3ee0e27cd17 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <linux/backing-dev.h> +#include <linux/dax.h> #include <linux/gfp.h> #include <linux/mm.h> #include <linux/swap.h> @@ -34,31 +35,39 @@ static void clear_exceptional_entry(struct address_space *mapping, return; spin_lock_irq(&mapping->tree_lock); - /* - * Regular page slots are stabilized by the page lock even - * without the tree itself locked. These unlocked entries - * need verification under the tree lock. - */ - if (!__radix_tree_lookup(&mapping->page_tree, index, &node, &slot)) - goto unlock; - if (*slot != entry) - goto unlock; - radix_tree_replace_slot(slot, NULL); - mapping->nrshadows--; - if (!node) - goto unlock; - workingset_node_shadows_dec(node); - /* - * Don't track node without shadow entries. - * - * Avoid acquiring the list_lru lock if already untracked. - * The list_empty() test is safe as node->private_list is - * protected by mapping->tree_lock. - */ - if (!workingset_node_shadows(node) && - !list_empty(&node->private_list)) - list_lru_del(&workingset_shadow_nodes, &node->private_list); - __radix_tree_delete_node(&mapping->page_tree, node); + + if (dax_mapping(mapping)) { + if (radix_tree_delete_item(&mapping->page_tree, index, entry)) + mapping->nrexceptional--; + } else { + /* + * Regular page slots are stabilized by the page lock even + * without the tree itself locked. These unlocked entries + * need verification under the tree lock. + */ + if (!__radix_tree_lookup(&mapping->page_tree, index, &node, + &slot)) + goto unlock; + if (*slot != entry) + goto unlock; + radix_tree_replace_slot(slot, NULL); + mapping->nrexceptional--; + if (!node) + goto unlock; + workingset_node_shadows_dec(node); + /* + * Don't track node without shadow entries. + * + * Avoid acquiring the list_lru lock if already untracked. + * The list_empty() test is safe as node->private_list is + * protected by mapping->tree_lock. + */ + if (!workingset_node_shadows(node) && + !list_empty(&node->private_list)) + list_lru_del(&workingset_shadow_nodes, + &node->private_list); + __radix_tree_delete_node(&mapping->page_tree, node); + } unlock: spin_unlock_irq(&mapping->tree_lock); } @@ -228,7 +237,7 @@ void truncate_inode_pages_range(struct address_space *mapping, int i; cleancache_invalidate_inode(mapping); - if (mapping->nrpages == 0 && mapping->nrshadows == 0) + if (mapping->nrpages == 0 && mapping->nrexceptional == 0) return; /* Offsets within partial pages */ @@ -402,7 +411,7 @@ EXPORT_SYMBOL(truncate_inode_pages); */ void truncate_inode_pages_final(struct address_space *mapping) { - unsigned long nrshadows; + unsigned long nrexceptional; unsigned long nrpages; /* @@ -416,14 +425,14 @@ void truncate_inode_pages_final(struct address_space *mapping) /* * When reclaim installs eviction entries, it increases - * nrshadows first, then decreases nrpages. Make sure we see + * nrexceptional first, then decreases nrpages. Make sure we see * this in the right order or we might miss an entry. */ nrpages = mapping->nrpages; smp_rmb(); - nrshadows = mapping->nrshadows; + nrexceptional = mapping->nrexceptional; - if (nrpages || nrshadows) { + if (nrpages || nrexceptional) { /* * As truncation uses a lockless tree lookup, cycle * the tree lock to make sure any ongoing tree diff --git a/mm/vmscan.c b/mm/vmscan.c index bd620b65db52..eb3dd37ccd7c 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -46,6 +46,7 @@ #include <linux/oom.h> #include <linux/prefetch.h> #include <linux/printk.h> +#include <linux/dax.h> #include <asm/tlbflush.h> #include <asm/div64.h> @@ -671,9 +672,15 @@ static int __remove_mapping(struct address_space *mapping, struct page *page, * inode reclaim needs to empty out the radix tree or * the nodes are lost. Don't plant shadows behind its * back. + * + * We also don't store shadows for DAX mappings because the + * only page cache pages found in these are zero pages + * covering holes, and because we don't want to mix DAX + * exceptional entries and shadow exceptional entries in the + * same page_tree. */ if (reclaimed && page_is_file_cache(page) && - !mapping_exiting(mapping)) + !mapping_exiting(mapping) && !dax_mapping(mapping)) shadow = workingset_eviction(mapping, page); __delete_from_page_cache(page, shadow, memcg); spin_unlock_irqrestore(&mapping->tree_lock, flags); diff --git a/mm/workingset.c b/mm/workingset.c index aa017133744b..61ead9e5549d 100644 --- a/mm/workingset.c +++ b/mm/workingset.c @@ -351,8 +351,8 @@ static enum lru_status shadow_lru_isolate(struct list_head *item, node->slots[i] = NULL; BUG_ON(node->count < (1U << RADIX_TREE_COUNT_SHIFT)); node->count -= 1U << RADIX_TREE_COUNT_SHIFT; - BUG_ON(!mapping->nrshadows); - mapping->nrshadows--; + BUG_ON(!mapping->nrexceptional); + mapping->nrexceptional--; } } BUG_ON(node->count); diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index 744e5936c10d..7aea0ccb6be6 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -289,10 +289,8 @@ static void __node_free_rcu(struct rcu_head *head) if (!n->tn_bits) kmem_cache_free(trie_leaf_kmem, n); - else if (n->tn_bits <= TNODE_KMALLOC_MAX) - kfree(n); else - vfree(n); + kvfree(n); } #define node_free(n) call_rcu(&tn_info(n)->rcu, __node_free_rcu) diff --git a/sound/core/control.c b/sound/core/control.c index 196a6fe100ca..a85d45595d02 100644 --- a/sound/core/control.c +++ b/sound/core/control.c @@ -1405,6 +1405,8 @@ static int snd_ctl_tlv_ioctl(struct snd_ctl_file *file, return -EFAULT; if (tlv.length < sizeof(unsigned int) * 2) return -EINVAL; + if (!tlv.numid) + return -EINVAL; down_read(&card->controls_rwsem); kctl = snd_ctl_find_numid(card, tlv.numid); if (kctl == NULL) { diff --git a/sound/core/hrtimer.c b/sound/core/hrtimer.c index f845ecf7e172..656d9a9032dc 100644 --- a/sound/core/hrtimer.c +++ b/sound/core/hrtimer.c @@ -90,7 +90,7 @@ static int snd_hrtimer_start(struct snd_timer *t) struct snd_hrtimer *stime = t->private_data; atomic_set(&stime->running, 0); - hrtimer_cancel(&stime->hrt); + hrtimer_try_to_cancel(&stime->hrt); hrtimer_start(&stime->hrt, ns_to_ktime(t->sticks * resolution), HRTIMER_MODE_REL); atomic_set(&stime->running, 1); @@ -101,6 +101,7 @@ static int snd_hrtimer_stop(struct snd_timer *t) { struct snd_hrtimer *stime = t->private_data; atomic_set(&stime->running, 0); + hrtimer_try_to_cancel(&stime->hrt); return 0; } diff --git a/sound/core/pcm_compat.c b/sound/core/pcm_compat.c index b48b434444ed..9630e9f72b7b 100644 --- a/sound/core/pcm_compat.c +++ b/sound/core/pcm_compat.c @@ -255,10 +255,15 @@ static int snd_pcm_ioctl_hw_params_compat(struct snd_pcm_substream *substream, if (! (runtime = substream->runtime)) return -ENOTTY; - /* only fifo_size is different, so just copy all */ - data = memdup_user(data32, sizeof(*data32)); - if (IS_ERR(data)) - return PTR_ERR(data); + data = kmalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* only fifo_size (RO from userspace) is different, so just copy all */ + if (copy_from_user(data, data32, sizeof(*data32))) { + err = -EFAULT; + goto error; + } if (refine) err = snd_pcm_hw_refine(substream, data); diff --git a/sound/core/seq/seq_compat.c b/sound/core/seq/seq_compat.c index 81f7c109dc46..65175902a68a 100644 --- a/sound/core/seq/seq_compat.c +++ b/sound/core/seq/seq_compat.c @@ -49,11 +49,12 @@ static int snd_seq_call_port_info_ioctl(struct snd_seq_client *client, unsigned struct snd_seq_port_info *data; mm_segment_t fs; - data = memdup_user(data32, sizeof(*data32)); - if (IS_ERR(data)) - return PTR_ERR(data); + data = kmalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; - if (get_user(data->flags, &data32->flags) || + if (copy_from_user(data, data32, sizeof(*data32)) || + get_user(data->flags, &data32->flags) || get_user(data->time_queue, &data32->time_queue)) goto error; data->kernel = NULL; diff --git a/sound/core/timer.c b/sound/core/timer.c index cb25aded5349..af1f68f7e315 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -65,6 +65,7 @@ struct snd_timer_user { int qtail; int qused; int queue_size; + bool disconnected; struct snd_timer_read *queue; struct snd_timer_tread *tqueue; spinlock_t qlock; @@ -290,6 +291,9 @@ int snd_timer_open(struct snd_timer_instance **ti, mutex_unlock(®ister_mutex); return -ENOMEM; } + /* take a card refcount for safe disconnection */ + if (timer->card) + get_device(&timer->card->card_dev); timeri->slave_class = tid->dev_sclass; timeri->slave_id = slave_id; if (list_empty(&timer->open_list_head) && timer->hw.open) @@ -359,6 +363,9 @@ int snd_timer_close(struct snd_timer_instance *timeri) } spin_unlock(&timer->lock); spin_unlock_irq(&slave_active_lock); + /* release a card refcount for safe disconnection */ + if (timer->card) + put_device(&timer->card->card_dev); mutex_unlock(®ister_mutex); } out: @@ -474,6 +481,8 @@ int snd_timer_start(struct snd_timer_instance *timeri, unsigned int ticks) timer = timeri->timer; if (timer == NULL) return -EINVAL; + if (timer->card && timer->card->shutdown) + return -ENODEV; spin_lock_irqsave(&timer->lock, flags); timeri->ticks = timeri->cticks = ticks; timeri->pticks = 0; @@ -505,6 +514,10 @@ static int _snd_timer_stop(struct snd_timer_instance *timeri, int event) spin_lock_irqsave(&timer->lock, flags); list_del_init(&timeri->ack_list); list_del_init(&timeri->active_list); + if (timer->card && timer->card->shutdown) { + spin_unlock_irqrestore(&timer->lock, flags); + return 0; + } if ((timeri->flags & SNDRV_TIMER_IFLG_RUNNING) && !(--timer->running)) { timer->hw.stop(timer); @@ -565,6 +578,8 @@ int snd_timer_continue(struct snd_timer_instance *timeri) timer = timeri->timer; if (! timer) return -EINVAL; + if (timer->card && timer->card->shutdown) + return -ENODEV; spin_lock_irqsave(&timer->lock, flags); if (!timeri->cticks) timeri->cticks = 1; @@ -628,6 +643,9 @@ static void snd_timer_tasklet(unsigned long arg) unsigned long resolution, ticks; unsigned long flags; + if (timer->card && timer->card->shutdown) + return; + spin_lock_irqsave(&timer->lock, flags); /* now process all callbacks */ while (!list_empty(&timer->sack_list_head)) { @@ -668,6 +686,9 @@ void snd_timer_interrupt(struct snd_timer * timer, unsigned long ticks_left) if (timer == NULL) return; + if (timer->card && timer->card->shutdown) + return; + spin_lock_irqsave(&timer->lock, flags); /* remember the current resolution */ @@ -881,8 +902,15 @@ static int snd_timer_dev_register(struct snd_device *dev) static int snd_timer_dev_disconnect(struct snd_device *device) { struct snd_timer *timer = device->device_data; + struct snd_timer_instance *ti; + mutex_lock(®ister_mutex); list_del_init(&timer->device_list); + /* wake up pending sleepers */ + list_for_each_entry(ti, &timer->open_list_head, open_list) { + if (ti->disconnect) + ti->disconnect(ti); + } mutex_unlock(®ister_mutex); return 0; } @@ -893,6 +921,8 @@ void snd_timer_notify(struct snd_timer *timer, int event, struct timespec *tstam unsigned long resolution = 0; struct snd_timer_instance *ti, *ts; + if (timer->card && timer->card->shutdown) + return; if (! (timer->hw.flags & SNDRV_TIMER_HW_SLAVE)) return; if (snd_BUG_ON(event < SNDRV_TIMER_EVENT_MSTART || @@ -1051,6 +1081,8 @@ static void snd_timer_proc_read(struct snd_info_entry *entry, mutex_lock(®ister_mutex); list_for_each_entry(timer, &snd_timer_list, device_list) { + if (timer->card && timer->card->shutdown) + continue; switch (timer->tmr_class) { case SNDRV_TIMER_CLASS_GLOBAL: snd_iprintf(buffer, "G%i: ", timer->tmr_device); @@ -1185,6 +1217,14 @@ static void snd_timer_user_ccallback(struct snd_timer_instance *timeri, wake_up(&tu->qchange_sleep); } +static void snd_timer_user_disconnect(struct snd_timer_instance *timeri) +{ + struct snd_timer_user *tu = timeri->callback_data; + + tu->disconnected = true; + wake_up(&tu->qchange_sleep); +} + static void snd_timer_user_tinterrupt(struct snd_timer_instance *timeri, unsigned long resolution, unsigned long ticks) @@ -1558,6 +1598,7 @@ static int snd_timer_user_tselect(struct file *file, ? snd_timer_user_tinterrupt : snd_timer_user_interrupt; tu->timeri->ccallback = snd_timer_user_ccallback; tu->timeri->callback_data = (void *)tu; + tu->timeri->disconnect = snd_timer_user_disconnect; } __err: @@ -1876,6 +1917,10 @@ static ssize_t snd_timer_user_read(struct file *file, char __user *buffer, remove_wait_queue(&tu->qchange_sleep, &wait); + if (tu->disconnected) { + err = -ENODEV; + break; + } if (signal_pending(current)) { err = -ERESTARTSYS; break; @@ -1925,6 +1970,8 @@ static unsigned int snd_timer_user_poll(struct file *file, poll_table * wait) mask = 0; if (tu->qused) mask |= POLLIN | POLLRDNORM; + if (tu->disconnected) + mask |= POLLERR; return mask; } diff --git a/sound/hda/hdac_i915.c b/sound/hda/hdac_i915.c index c50177fb469f..f6854dbd7d8d 100644 --- a/sound/hda/hdac_i915.c +++ b/sound/hda/hdac_i915.c @@ -306,7 +306,7 @@ out_master_del: out_err: kfree(acomp); bus->audio_component = NULL; - dev_err(dev, "failed to add i915 component master (%d)\n", ret); + dev_info(dev, "failed to add i915 component master (%d)\n", ret); return ret; } diff --git a/sound/pci/hda/hda_bind.c b/sound/pci/hda/hda_bind.c index 70671ad65d24..6efadbfb3fe3 100644 --- a/sound/pci/hda/hda_bind.c +++ b/sound/pci/hda/hda_bind.c @@ -174,14 +174,40 @@ static inline bool codec_probed(struct hda_codec *codec) return device_attach(hda_codec_dev(codec)) > 0 && codec->preset; } -/* try to auto-load and bind the codec module */ -static void codec_bind_module(struct hda_codec *codec) +/* try to auto-load codec module */ +static void request_codec_module(struct hda_codec *codec) { #ifdef MODULE char modalias[32]; + const char *mod = NULL; + + switch (codec->probe_id) { + case HDA_CODEC_ID_GENERIC_HDMI: +#if IS_MODULE(CONFIG_SND_HDA_CODEC_HDMI) + mod = "snd-hda-codec-hdmi"; +#endif + break; + case HDA_CODEC_ID_GENERIC: +#if IS_MODULE(CONFIG_SND_HDA_GENERIC) + mod = "snd-hda-codec-generic"; +#endif + break; + default: + snd_hdac_codec_modalias(&codec->core, modalias, sizeof(modalias)); + mod = modalias; + break; + } + + if (mod) + request_module(mod); +#endif /* MODULE */ +} - snd_hdac_codec_modalias(&codec->core, modalias, sizeof(modalias)); - request_module(modalias); +/* try to auto-load and bind the codec module */ +static void codec_bind_module(struct hda_codec *codec) +{ +#ifdef MODULE + request_codec_module(codec); if (codec_probed(codec)) return; #endif @@ -218,17 +244,13 @@ static int codec_bind_generic(struct hda_codec *codec) if (is_likely_hdmi_codec(codec)) { codec->probe_id = HDA_CODEC_ID_GENERIC_HDMI; -#if IS_MODULE(CONFIG_SND_HDA_CODEC_HDMI) - request_module("snd-hda-codec-hdmi"); -#endif + request_codec_module(codec); if (codec_probed(codec)) return 0; } codec->probe_id = HDA_CODEC_ID_GENERIC; -#if IS_MODULE(CONFIG_SND_HDA_GENERIC) - request_module("snd-hda-codec-generic"); -#endif + request_codec_module(codec); if (codec_probed(codec)) return 0; return -ENODEV; diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index c0bef11afa7e..256e6cda218f 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2078,9 +2078,11 @@ static int azx_probe_continue(struct azx *chip) * for other chips, still continue probing as other * codecs can be on the same link. */ - if (CONTROLLER_IN_GPU(pci)) + if (CONTROLLER_IN_GPU(pci)) { + dev_err(chip->card->dev, + "HSW/BDW HD-audio HDMI/DP requires binding with gfx driver\n"); goto out_free; - else + } else goto skip_i915; } @@ -2149,9 +2151,17 @@ i915_power_fail: static void azx_remove(struct pci_dev *pci) { struct snd_card *card = pci_get_drvdata(pci); + struct azx *chip; + struct hda_intel *hda; + + if (card) { + /* flush the pending probing work */ + chip = card->private_data; + hda = container_of(chip, struct hda_intel, chip); + flush_work(&hda->probe_work); - if (card) snd_card_free(card); + } } static void azx_shutdown(struct pci_dev *pci) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8143c0e24a27..33753244f48f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6566,6 +6566,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x069f, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800), SND_PCI_QUIRK(0x1043, 0x11cd, "Asus N550", ALC662_FIXUP_BASS_1A), + SND_PCI_QUIRK(0x1043, 0x13df, "Asus N550JX", ALC662_FIXUP_BASS_1A), SND_PCI_QUIRK(0x1043, 0x1477, "ASUS N56VZ", ALC662_FIXUP_BASS_MODE4_CHMAP), SND_PCI_QUIRK(0x1043, 0x15a7, "ASUS UX51VZH", ALC662_FIXUP_BASS_16), SND_PCI_QUIRK(0x1043, 0x1b73, "ASUS N55SF", ALC662_FIXUP_BASS_16), diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c index 39522367897c..fac7e6eb9529 100644 --- a/sound/spi/at73c213.c +++ b/sound/spi/at73c213.c @@ -221,6 +221,8 @@ static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream) runtime->hw = snd_at73c213_playback_hw; chip->substream = substream; + clk_enable(chip->ssc->clk); + return 0; } @@ -228,6 +230,7 @@ static int snd_at73c213_pcm_close(struct snd_pcm_substream *substream) { struct snd_at73c213 *chip = snd_pcm_substream_chip(substream); chip->substream = NULL; + clk_disable(chip->ssc->clk); return 0; } @@ -897,6 +900,8 @@ static int snd_at73c213_dev_init(struct snd_card *card, chip->card = card; chip->irq = -1; + clk_enable(chip->ssc->clk); + retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip); if (retval) { dev_dbg(&chip->spi->dev, "unable to request irq %d\n", irq); @@ -935,6 +940,8 @@ out_irq: free_irq(chip->irq, chip); chip->irq = -1; out: + clk_disable(chip->ssc->clk); + return retval; } @@ -1012,7 +1019,9 @@ static int snd_at73c213_remove(struct spi_device *spi) int retval; /* Stop playback. */ + clk_enable(chip->ssc->clk); ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS)); + clk_disable(chip->ssc->clk); /* Mute sound. */ retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f); @@ -1080,6 +1089,7 @@ static int snd_at73c213_suspend(struct device *dev) struct snd_at73c213 *chip = card->private_data; ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS)); + clk_disable(chip->ssc->clk); clk_disable(chip->board->dac_clk); return 0; @@ -1091,6 +1101,7 @@ static int snd_at73c213_resume(struct device *dev) struct snd_at73c213 *chip = card->private_data; clk_enable(chip->board->dac_clk); + clk_enable(chip->ssc->clk); ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN)); return 0; |