diff options
60 files changed, 475 insertions, 426 deletions
diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt index eb0fae18ffb1..771d48d3b335 100644 --- a/Documentation/arm/memory.txt +++ b/Documentation/arm/memory.txt @@ -33,7 +33,13 @@ ffff0000 ffff0fff CPU vector page. fffe0000 fffeffff XScale cache flush area. This is used in proc-xscale.S to flush the whole data - cache. Free for other usage on non-XScale. + cache. (XScale does not have TCM.) + +fffe8000 fffeffff DTCM mapping area for platforms with + DTCM mounted inside the CPU. + +fffe0000 fffe7fff ITCM mapping area for platforms with + ITCM mounted inside the CPU. fff00000 fffdffff Fixmap mapping region. Addresses provided by fix_to_virt() will be located here. diff --git a/Documentation/arm/tcm.txt b/Documentation/arm/tcm.txt index 77fd9376e6d7..7c15871c1885 100644 --- a/Documentation/arm/tcm.txt +++ b/Documentation/arm/tcm.txt @@ -19,8 +19,8 @@ defines a CPUID_TCM register that you can read out from the system control coprocessor. Documentation from ARM can be found at http://infocenter.arm.com, search for "TCM Status Register" to see documents for all CPUs. Reading this register you can -determine if ITCM (bit 0) and/or DTCM (bit 16) is present in the -machine. +determine if ITCM (bits 1-0) and/or DTCM (bit 17-16) is present +in the machine. There is further a TCM region register (search for "TCM Region Registers" at the ARM site) that can report and modify the location @@ -35,7 +35,15 @@ The TCM memory can then be remapped to another address again using the MMU, but notice that the TCM if often used in situations where the MMU is turned off. To avoid confusion the current Linux implementation will map the TCM 1 to 1 from physical to virtual -memory in the location specified by the machine. +memory in the location specified by the kernel. Currently Linux +will map ITCM to 0xfffe0000 and on, and DTCM to 0xfffe8000 and +on, supporting a maximum of 32KiB of ITCM and 32KiB of DTCM. + +Newer versions of the region registers also support dividing these +TCMs in two separate banks, so for example an 8KiB ITCM is divided +into two 4KiB banks with its own control registers. The idea is to +be able to lock and hide one of the banks for use by the secure +world (TrustZone). TCM is used for a few things: @@ -65,18 +73,18 @@ in <asm/tcm.h>. Using this interface it is possible to: memory. Such a heap is great for things like saving device state when shutting off device power domains. -A machine that has TCM memory shall select HAVE_TCM in -arch/arm/Kconfig for itself, and then the -rest of the functionality will depend on the physical -location and size of ITCM and DTCM to be defined in -mach/memory.h for the machine. Code that needs to use -TCM shall #include <asm/tcm.h> If the TCM is not located -at the place given in memory.h it will be moved using -the TCM Region registers. +A machine that has TCM memory shall select HAVE_TCM from +arch/arm/Kconfig for itself. Code that needs to use TCM shall +#include <asm/tcm.h> Functions to go into itcm can be tagged like this: int __tcmfunc foo(int bar); +Since these are marked to become long_calls and you may want +to have functions called locally inside the TCM without +wasting space, there is also the __tcmlocalfunc prefix that +will make the call relative. + Variables to go into dtcm can be tagged like this: int __tcmdata foo; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4047f5724da3..ba1ac08b4e02 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -57,7 +57,7 @@ config GENERIC_CLOCKEVENTS config GENERIC_CLOCKEVENTS_BROADCAST bool depends on GENERIC_CLOCKEVENTS - default y if SMP && !LOCAL_TIMERS + default y if SMP config HAVE_TCM bool @@ -1263,8 +1263,7 @@ config HW_PERF_EVENTS disabled, perf events will use software events only. config SPARSE_IRQ - bool "Support sparse irq numbering" - depends on EXPERIMENTAL + def_bool n help This enables support for sparse irqs. This is useful in general as most CPUs have a fairly sparse array of IRQ vectors, which @@ -1272,8 +1271,6 @@ config SPARSE_IRQ number of off-chip IRQs will want to treat this as experimental until they have been independently verified. - If you don't know what to do here, say N. - source "mm/Kconfig" config FORCE_MAX_ZONEORDER diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index 742c2aaeb020..d2fedb5aeb1f 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -27,6 +27,8 @@ struct map_desc { #define MT_MEMORY 9 #define MT_ROM 10 #define MT_MEMORY_NONCACHED 11 +#define MT_MEMORY_DTCM 12 +#define MT_MEMORY_ITCM 13 #ifdef CONFIG_MMU extern void iotable_init(struct map_desc *, int); diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 82df0ae71bb4..23c2e8e5c0fa 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -124,6 +124,15 @@ #endif /* !CONFIG_MMU */ /* + * We fix the TCM memories max 32 KiB ITCM resp DTCM at these + * locations + */ +#ifdef CONFIG_HAVE_TCM +#define ITCM_OFFSET UL(0xfffe0000) +#define DTCM_OFFSET UL(0xfffe8000) +#endif + +/* * Physical vs virtual RAM address space conversion. These are * private definitions which should NOT be used outside memory.h * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 5f4f48002734..8ba1ccf82a02 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -83,7 +83,7 @@ void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *), - int sig, const char *name); + int sig, int code, const char *name); #define xchg(ptr,x) \ ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 81e989858d42..1fc74cbd1a19 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -37,10 +37,6 @@ void machine_kexec_cleanup(struct kimage *image) { } -void machine_shutdown(void) -{ -} - void machine_crash_shutdown(struct pt_regs *regs) { local_irq_disable(); @@ -78,7 +74,11 @@ void machine_kexec(struct kimage *image) (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE); printk(KERN_INFO "Bye!\n"); - cpu_proc_fin(); + local_irq_disable(); + local_fiq_disable(); setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/ + flush_cache_all(); + cpu_proc_fin(); + flush_cache_all(); cpu_reset(reboot_code_buffer_phys); } diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index a4a9cc88bec7..2e2ec97cc50c 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -29,6 +29,7 @@ #include <linux/utsname.h> #include <linux/uaccess.h> +#include <asm/cacheflush.h> #include <asm/leds.h> #include <asm/processor.h> #include <asm/system.h> @@ -84,10 +85,9 @@ __setup("hlt", hlt_setup); void arm_machine_restart(char mode, const char *cmd) { - /* - * Clean and disable cache, and turn off interrupts - */ - cpu_proc_fin(); + /* Disable interrupts first */ + local_irq_disable(); + local_fiq_disable(); /* * Tell the mm system that we are going to reboot - @@ -96,6 +96,15 @@ void arm_machine_restart(char mode, const char *cmd) */ setup_mm_for_reboot(mode); + /* Clean and invalidate caches */ + flush_cache_all(); + + /* Turn off caching */ + cpu_proc_fin(); + + /* Push out any further dirty data, and ensure cache is empty */ + flush_cache_all(); + /* * Now call the architecture specific reboot code. */ @@ -189,19 +198,29 @@ int __init reboot_setup(char *str) __setup("reboot=", reboot_setup); -void machine_halt(void) +void machine_shutdown(void) { +#ifdef CONFIG_SMP + smp_send_stop(); +#endif } +void machine_halt(void) +{ + machine_shutdown(); + while (1); +} void machine_power_off(void) { + machine_shutdown(); if (pm_power_off) pm_power_off(); } void machine_restart(char *cmd) { + machine_shutdown(); arm_pm_restart(reboot_mode, cmd); } diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index b8c3d0f689d9..40dc74f2b27f 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -429,7 +429,11 @@ static void smp_timer_broadcast(const struct cpumask *mask) { send_ipi_message(mask, IPI_TIMER); } +#else +#define smp_timer_broadcast NULL +#endif +#ifndef CONFIG_LOCAL_TIMERS static void broadcast_timer_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { @@ -444,7 +448,6 @@ static void local_timer_setup(struct clock_event_device *evt) evt->rating = 400; evt->mult = 1; evt->set_mode = broadcast_timer_set_mode; - evt->broadcast = smp_timer_broadcast; clockevents_register_device(evt); } @@ -456,6 +459,7 @@ void __cpuinit percpu_timer_setup(void) struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu); evt->cpumask = cpumask_of(cpu); + evt->broadcast = smp_timer_broadcast; local_timer_setup(evt); } @@ -467,10 +471,13 @@ static DEFINE_SPINLOCK(stop_lock); */ static void ipi_cpu_stop(unsigned int cpu) { - spin_lock(&stop_lock); - printk(KERN_CRIT "CPU%u: stopping\n", cpu); - dump_stack(); - spin_unlock(&stop_lock); + if (system_state == SYSTEM_BOOTING || + system_state == SYSTEM_RUNNING) { + spin_lock(&stop_lock); + printk(KERN_CRIT "CPU%u: stopping\n", cpu); + dump_stack(); + spin_unlock(&stop_lock); + } set_cpu_online(cpu, false); diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 7c5f0c024db7..35882fbf37f9 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -132,7 +132,8 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) twd_calibrate_rate(); clk->name = "local_timer"; - clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT | + CLOCK_EVT_FEAT_C3STOP; clk->rating = 350; clk->set_mode = twd_set_mode; clk->set_next_event = twd_set_next_event; diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index e50303868f1b..26685c2f7a49 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -13,38 +13,35 @@ #include <linux/ioport.h> #include <linux/genalloc.h> #include <linux/string.h> /* memcpy */ -#include <asm/page.h> /* PAGE_SHIFT */ #include <asm/cputype.h> #include <asm/mach/map.h> #include <mach/memory.h> #include "tcm.h" -/* Scream and warn about misuse */ -#if !defined(ITCM_OFFSET) || !defined(ITCM_END) || \ - !defined(DTCM_OFFSET) || !defined(DTCM_END) -#error "TCM support selected but offsets not defined!" -#endif - static struct gen_pool *tcm_pool; /* TCM section definitions from the linker */ extern char __itcm_start, __sitcm_text, __eitcm_text; extern char __dtcm_start, __sdtcm_data, __edtcm_data; +/* These will be increased as we run */ +u32 dtcm_end = DTCM_OFFSET; +u32 itcm_end = ITCM_OFFSET; + /* * TCM memory resources */ static struct resource dtcm_res = { .name = "DTCM RAM", .start = DTCM_OFFSET, - .end = DTCM_END, + .end = DTCM_OFFSET, .flags = IORESOURCE_MEM }; static struct resource itcm_res = { .name = "ITCM RAM", .start = ITCM_OFFSET, - .end = ITCM_END, + .end = ITCM_OFFSET, .flags = IORESOURCE_MEM }; @@ -52,8 +49,8 @@ static struct map_desc dtcm_iomap[] __initdata = { { .virtual = DTCM_OFFSET, .pfn = __phys_to_pfn(DTCM_OFFSET), - .length = (DTCM_END - DTCM_OFFSET + 1), - .type = MT_UNCACHED + .length = 0, + .type = MT_MEMORY_DTCM } }; @@ -61,8 +58,8 @@ static struct map_desc itcm_iomap[] __initdata = { { .virtual = ITCM_OFFSET, .pfn = __phys_to_pfn(ITCM_OFFSET), - .length = (ITCM_END - ITCM_OFFSET + 1), - .type = MT_UNCACHED + .length = 0, + .type = MT_MEMORY_ITCM } }; @@ -93,14 +90,24 @@ void tcm_free(void *addr, size_t len) } EXPORT_SYMBOL(tcm_free); - -static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size) +static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks, + u32 *offset) { const int tcm_sizes[16] = { 0, -1, -1, 4, 8, 16, 32, 64, 128, 256, 512, 1024, -1, -1, -1, -1 }; u32 tcm_region; int tcm_size; + /* + * If there are more than one TCM bank of this type, + * select the TCM bank to operate on in the TCM selection + * register. + */ + if (banks > 1) + asm("mcr p15, 0, %0, c9, c2, 0" + : /* No output operands */ + : "r" (bank)); + /* Read the special TCM region register c9, 0 */ if (!type) asm("mrc p15, 0, %0, c9, c1, 0" @@ -111,26 +118,24 @@ static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size) tcm_size = tcm_sizes[(tcm_region >> 2) & 0x0f]; if (tcm_size < 0) { - pr_err("CPU: %sTCM of unknown size!\n", - type ? "I" : "D"); + pr_err("CPU: %sTCM%d of unknown size\n", + type ? "I" : "D", bank); + return -EINVAL; + } else if (tcm_size > 32) { + pr_err("CPU: %sTCM%d larger than 32k found\n", + type ? "I" : "D", bank); + return -EINVAL; } else { - pr_info("CPU: found %sTCM %dk @ %08x, %senabled\n", + pr_info("CPU: found %sTCM%d %dk @ %08x, %senabled\n", type ? "I" : "D", + bank, tcm_size, (tcm_region & 0xfffff000U), (tcm_region & 1) ? "" : "not "); } - if (tcm_size != expected_size) { - pr_crit("CPU: %sTCM was detected %dk but expected %dk!\n", - type ? "I" : "D", - tcm_size, - expected_size); - /* Adjust to the expected size? what can we do... */ - } - /* Force move the TCM bank to where we want it, enable */ - tcm_region = offset | (tcm_region & 0x00000ffeU) | 1; + tcm_region = *offset | (tcm_region & 0x00000ffeU) | 1; if (!type) asm("mcr p15, 0, %0, c9, c1, 0" @@ -141,10 +146,15 @@ static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size) : /* No output operands */ : "r" (tcm_region)); - pr_debug("CPU: moved %sTCM %dk to %08x, enabled\n", - type ? "I" : "D", - tcm_size, - (tcm_region & 0xfffff000U)); + /* Increase offset */ + *offset += (tcm_size << 10); + + pr_info("CPU: moved %sTCM%d %dk to %08x, enabled\n", + type ? "I" : "D", + bank, + tcm_size, + (tcm_region & 0xfffff000U)); + return 0; } /* @@ -153,34 +163,52 @@ static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size) void __init tcm_init(void) { u32 tcm_status = read_cpuid_tcmstatus(); + u8 dtcm_banks = (tcm_status >> 16) & 0x03; + u8 itcm_banks = (tcm_status & 0x03); char *start; char *end; char *ram; + int ret; + int i; /* Setup DTCM if present */ - if (tcm_status & (1 << 16)) { - setup_tcm_bank(0, DTCM_OFFSET, - (DTCM_END - DTCM_OFFSET + 1) >> 10); + if (dtcm_banks > 0) { + for (i = 0; i < dtcm_banks; i++) { + ret = setup_tcm_bank(0, i, dtcm_banks, &dtcm_end); + if (ret) + return; + } + dtcm_res.end = dtcm_end - 1; request_resource(&iomem_resource, &dtcm_res); + dtcm_iomap[0].length = dtcm_end - DTCM_OFFSET; iotable_init(dtcm_iomap, 1); /* Copy data from RAM to DTCM */ start = &__sdtcm_data; end = &__edtcm_data; ram = &__dtcm_start; + /* This means you compiled more code than fits into DTCM */ + BUG_ON((end - start) > (dtcm_end - DTCM_OFFSET)); memcpy(start, ram, (end-start)); pr_debug("CPU DTCM: copied data from %p - %p\n", start, end); } /* Setup ITCM if present */ - if (tcm_status & 1) { - setup_tcm_bank(1, ITCM_OFFSET, - (ITCM_END - ITCM_OFFSET + 1) >> 10); + if (itcm_banks > 0) { + for (i = 0; i < itcm_banks; i++) { + ret = setup_tcm_bank(1, i, itcm_banks, &itcm_end); + if (ret) + return; + } + itcm_res.end = itcm_end - 1; request_resource(&iomem_resource, &itcm_res); + itcm_iomap[0].length = itcm_end - ITCM_OFFSET; iotable_init(itcm_iomap, 1); /* Copy code from RAM to ITCM */ start = &__sitcm_text; end = &__eitcm_text; ram = &__itcm_start; + /* This means you compiled more code than fits into ITCM */ + BUG_ON((end - start) > (itcm_end - ITCM_OFFSET)); memcpy(start, ram, (end-start)); pr_debug("CPU ITCM: copied code from %p - %p\n", start, end); } @@ -208,10 +236,10 @@ static int __init setup_tcm_pool(void) pr_debug("Setting up TCM memory pool\n"); /* Add the rest of DTCM to the TCM pool */ - if (tcm_status & (1 << 16)) { - if (dtcm_pool_start < DTCM_END) { + if (tcm_status & (0x03 << 16)) { + if (dtcm_pool_start < dtcm_end) { ret = gen_pool_add(tcm_pool, dtcm_pool_start, - DTCM_END - dtcm_pool_start + 1, -1); + dtcm_end - dtcm_pool_start, -1); if (ret) { pr_err("CPU DTCM: could not add DTCM " \ "remainder to pool!\n"); @@ -219,16 +247,16 @@ static int __init setup_tcm_pool(void) } pr_debug("CPU DTCM: Added %08x bytes @ %08x to " \ "the TCM memory pool\n", - DTCM_END - dtcm_pool_start + 1, + dtcm_end - dtcm_pool_start, dtcm_pool_start); } } /* Add the rest of ITCM to the TCM pool */ - if (tcm_status & 1) { - if (itcm_pool_start < ITCM_END) { + if (tcm_status & 0x03) { + if (itcm_pool_start < itcm_end) { ret = gen_pool_add(tcm_pool, itcm_pool_start, - ITCM_END - itcm_pool_start + 1, -1); + itcm_end - itcm_pool_start, -1); if (ret) { pr_err("CPU ITCM: could not add ITCM " \ "remainder to pool!\n"); @@ -236,7 +264,7 @@ static int __init setup_tcm_pool(void) } pr_debug("CPU ITCM: Added %08x bytes @ %08x to " \ "the TCM memory pool\n", - ITCM_END - itcm_pool_start + 1, + itcm_end - itcm_pool_start, itcm_pool_start); } } diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index 9cef0590d5aa..6467d99fa2ee 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -505,10 +505,10 @@ void __init pci_v3_preinit(void) /* * Hook in our fault handler for PCI errors */ - hook_fault_code(4, v3_pci_fault, SIGBUS, "external abort on linefetch"); - hook_fault_code(6, v3_pci_fault, SIGBUS, "external abort on linefetch"); - hook_fault_code(8, v3_pci_fault, SIGBUS, "external abort on non-linefetch"); - hook_fault_code(10, v3_pci_fault, SIGBUS, "external abort on non-linefetch"); + hook_fault_code(4, v3_pci_fault, SIGBUS, 0, "external abort on linefetch"); + hook_fault_code(6, v3_pci_fault, SIGBUS, 0, "external abort on linefetch"); + hook_fault_code(8, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); + hook_fault_code(10, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); spin_lock_irqsave(&v3_lock, flags); diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 6d5a90813d31..773ea0c95b9f 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -987,7 +987,7 @@ void __init iop13xx_pci_init(void) iop13xx_atux_setup(); } - hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS, + hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS, 0, "imprecise external abort"); } diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c index 90771cad06f8..f797c5f538b0 100644 --- a/arch/arm/mach-ixp2000/pci.c +++ b/arch/arm/mach-ixp2000/pci.c @@ -209,7 +209,7 @@ ixp2000_pci_preinit(void) "the needed workaround has not been configured in"); #endif - hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, + hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, 0, "PCI config cycle to non-existent device"); } diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c index 4b0e598a91c9..563819a83292 100644 --- a/arch/arm/mach-ixp23xx/pci.c +++ b/arch/arm/mach-ixp23xx/pci.c @@ -229,7 +229,7 @@ void __init ixp23xx_pci_preinit(void) { ixp23xx_pci_common_init(); - hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, + hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, 0, "PCI config cycle to non-existent device"); *IXP23XX_PCI_ADDR_EXT = 0x0000e000; diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 333d04c53650..61cd4d64b985 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -382,7 +382,8 @@ void __init ixp4xx_pci_preinit(void) /* hook in our fault handler for PCI errors */ - hook_fault_code(16+6, abort_handler, SIGBUS, "imprecise external abort"); + hook_fault_code(16+6, abort_handler, SIGBUS, 0, + "imprecise external abort"); pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n"); diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c index 78499667eb7b..5fcd082a17f9 100644 --- a/arch/arm/mach-ks8695/pci.c +++ b/arch/arm/mach-ks8695/pci.c @@ -268,8 +268,8 @@ static void __init ks8695_pci_preinit(void) __raw_writel(0, KS8695_PCI_VA + KS8695_PIOBAC); /* hook in fault handlers */ - hook_fault_code(8, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch"); - hook_fault_code(10, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch"); + hook_fault_code(8, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); + hook_fault_code(10, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); } static void ks8695_show_pciregs(void) diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h index ab000df7fc03..bf134bcc129d 100644 --- a/arch/arm/mach-u300/include/mach/memory.h +++ b/arch/arm/mach-u300/include/mach/memory.h @@ -35,14 +35,6 @@ #endif /* - * TCM memory whereabouts - */ -#define ITCM_OFFSET 0xffff2000 -#define ITCM_END 0xffff3fff -#define DTCM_OFFSET 0xffff4000 -#define DTCM_END 0xffff5fff - -/* * We enable a real big DMA buffer if need be. */ #define CONSISTENT_DMA_SIZE SZ_4M diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 6f98c358989a..d073b64ae87e 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -924,8 +924,20 @@ static int __init alignment_init(void) ai_usermode = UM_FIXUP; } - hook_fault_code(1, do_alignment, SIGILL, "alignment exception"); - hook_fault_code(3, do_alignment, SIGILL, "alignment exception"); + hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN, + "alignment exception"); + + /* + * ARMv6K and ARMv7 use fault status 3 (0b00011) as Access Flag section + * fault, not as alignment error. + * + * TODO: handle ARMv6K properly. Runtime check for 'K' extension is + * needed. + */ + if (cpu_architecture() <= CPU_ARCH_ARMv6) { + hook_fault_code(3, do_alignment, SIGBUS, BUS_ADRALN, + "alignment exception"); + } return 0; } diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 9e7742f0a102..c704eed63c5d 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -183,6 +183,8 @@ static void * __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot) { struct arm_vmregion *c; + size_t align; + int bit; if (!consistent_pte[0]) { printk(KERN_ERR "%s: not initialised\n", __func__); @@ -191,9 +193,20 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot) } /* + * Align the virtual region allocation - maximum alignment is + * a section size, minimum is a page size. This helps reduce + * fragmentation of the DMA space, and also prevents allocations + * smaller than a section from crossing a section boundary. + */ + bit = fls(size - 1) + 1; + if (bit > SECTION_SHIFT) + bit = SECTION_SHIFT; + align = 1 << bit; + + /* * Allocate a virtual address in the consistent mapping region. */ - c = arm_vmregion_alloc(&consistent_head, size, + c = arm_vmregion_alloc(&consistent_head, align, size, gfp & ~(__GFP_DMA | __GFP_HIGHMEM)); if (c) { pte_t *pte; diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index cbfb2edcf7d1..23b0b03af5ea 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -413,7 +413,16 @@ do_translation_fault(unsigned long addr, unsigned int fsr, pmd_k = pmd_offset(pgd_k, addr); pmd = pmd_offset(pgd, addr); - if (pmd_none(*pmd_k)) + /* + * On ARM one Linux PGD entry contains two hardware entries (see page + * tables layout in pgtable.h). We normally guarantee that we always + * fill both L1 entries. But create_mapping() doesn't follow the rule. + * It can create inidividual L1 entries, so here we have to call + * pmd_none() check for the entry really corresponded to address, not + * for the first of pair. + */ + index = (addr >> SECTION_SHIFT) & 1; + if (pmd_none(pmd_k[index])) goto bad_area; copy_pmd(pmd, pmd_k); @@ -463,15 +472,10 @@ static struct fsr_info { * defines these to be "precise" aborts. */ { do_bad, SIGSEGV, 0, "vector exception" }, - { do_bad, SIGILL, BUS_ADRALN, "alignment exception" }, + { do_bad, SIGBUS, BUS_ADRALN, "alignment exception" }, { do_bad, SIGKILL, 0, "terminal exception" }, - { do_bad, SIGILL, BUS_ADRALN, "alignment exception" }, -/* Do we need runtime check ? */ -#if __LINUX_ARM_ARCH__ < 6 + { do_bad, SIGBUS, BUS_ADRALN, "alignment exception" }, { do_bad, SIGBUS, 0, "external abort on linefetch" }, -#else - { do_translation_fault, SIGSEGV, SEGV_MAPERR, "I-cache maintenance fault" }, -#endif { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" }, { do_bad, SIGBUS, 0, "external abort on linefetch" }, { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" }, @@ -508,13 +512,15 @@ static struct fsr_info { void __init hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *), - int sig, const char *name) + int sig, int code, const char *name) { - if (nr >= 0 && nr < ARRAY_SIZE(fsr_info)) { - fsr_info[nr].fn = fn; - fsr_info[nr].sig = sig; - fsr_info[nr].name = name; - } + if (nr < 0 || nr >= ARRAY_SIZE(fsr_info)) + BUG(); + + fsr_info[nr].fn = fn; + fsr_info[nr].sig = sig; + fsr_info[nr].code = code; + fsr_info[nr].name = name; } /* @@ -594,3 +600,25 @@ do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs) arm_notify_die("", regs, &info, ifsr, 0); } +static int __init exceptions_init(void) +{ + if (cpu_architecture() >= CPU_ARCH_ARMv6) { + hook_fault_code(4, do_translation_fault, SIGSEGV, SEGV_MAPERR, + "I-cache maintenance fault"); + } + + if (cpu_architecture() >= CPU_ARCH_ARMv7) { + /* + * TODO: Access flag faults introduced in ARMv6K. + * Runtime check for 'K' extension is needed + */ + hook_fault_code(3, do_bad, SIGSEGV, SEGV_MAPERR, + "section access flag fault"); + hook_fault_code(6, do_bad, SIGSEGV, SEGV_MAPERR, + "section access flag fault"); + } + + return 0; +} + +arch_initcall(exceptions_init); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 599d121c81e7..240b68d511dc 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -432,6 +432,11 @@ void __init mem_init(void) { unsigned long reserved_pages, free_pages; int i; +#ifdef CONFIG_HAVE_TCM + /* These pointers are filled in on TCM detection */ + extern u32 dtcm_end; + extern u32 itcm_end; +#endif max_mapnr = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map; @@ -503,6 +508,10 @@ void __init mem_init(void) printk(KERN_NOTICE "Virtual kernel memory layout:\n" " vector : 0x%08lx - 0x%08lx (%4ld kB)\n" +#ifdef CONFIG_HAVE_TCM + " DTCM : 0x%08lx - 0x%08lx (%4ld kB)\n" + " ITCM : 0x%08lx - 0x%08lx (%4ld kB)\n" +#endif " fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n" #ifdef CONFIG_MMU " DMA : 0x%08lx - 0x%08lx (%4ld MB)\n" @@ -519,6 +528,10 @@ void __init mem_init(void) MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) + (PAGE_SIZE)), +#ifdef CONFIG_HAVE_TCM + MLK(DTCM_OFFSET, (unsigned long) dtcm_end), + MLK(ITCM_OFFSET, (unsigned long) itcm_end), +#endif MLK(FIXADDR_START, FIXADDR_TOP), #ifdef CONFIG_MMU MLM(CONSISTENT_BASE, CONSISTENT_END), diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 03f11935ed08..ab506272b2d3 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -42,78 +42,11 @@ */ #define VM_ARM_SECTION_MAPPING 0x80000000 -static int remap_area_pte(pmd_t *pmd, unsigned long addr, unsigned long end, - unsigned long phys_addr, const struct mem_type *type) -{ - pgprot_t prot = __pgprot(type->prot_pte); - pte_t *pte; - - pte = pte_alloc_kernel(pmd, addr); - if (!pte) - return -ENOMEM; - - do { - if (!pte_none(*pte)) - goto bad; - - set_pte_ext(pte, pfn_pte(phys_addr >> PAGE_SHIFT, prot), 0); - phys_addr += PAGE_SIZE; - } while (pte++, addr += PAGE_SIZE, addr != end); - return 0; - - bad: - printk(KERN_CRIT "remap_area_pte: page already exists\n"); - BUG(); -} - -static inline int remap_area_pmd(pgd_t *pgd, unsigned long addr, - unsigned long end, unsigned long phys_addr, - const struct mem_type *type) -{ - unsigned long next; - pmd_t *pmd; - int ret = 0; - - pmd = pmd_alloc(&init_mm, pgd, addr); - if (!pmd) - return -ENOMEM; - - do { - next = pmd_addr_end(addr, end); - ret = remap_area_pte(pmd, addr, next, phys_addr, type); - if (ret) - return ret; - phys_addr += next - addr; - } while (pmd++, addr = next, addr != end); - return ret; -} - -static int remap_area_pages(unsigned long start, unsigned long pfn, - size_t size, const struct mem_type *type) -{ - unsigned long addr = start; - unsigned long next, end = start + size; - unsigned long phys_addr = __pfn_to_phys(pfn); - pgd_t *pgd; - int err = 0; - - BUG_ON(addr >= end); - pgd = pgd_offset_k(addr); - do { - next = pgd_addr_end(addr, end); - err = remap_area_pmd(pgd, addr, next, phys_addr, type); - if (err) - break; - phys_addr += next - addr; - } while (pgd++, addr = next, addr != end); - - return err; -} - int ioremap_page(unsigned long virt, unsigned long phys, const struct mem_type *mtype) { - return remap_area_pages(virt, __phys_to_pfn(phys), PAGE_SIZE, mtype); + return ioremap_page_range(virt, virt + PAGE_SIZE, phys, + __pgprot(mtype->prot_pte)); } EXPORT_SYMBOL(ioremap_page); @@ -300,7 +233,8 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, err = remap_area_sections(addr, pfn, size, type); } else #endif - err = remap_area_pages(addr, pfn, size, type); + err = ioremap_page_range(addr, addr + size, __pfn_to_phys(pfn), + __pgprot(type->prot_pte)); if (err) { vunmap((void *)addr); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index d5541adc3520..6e1c4f6a2b3f 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -257,6 +257,19 @@ static struct mem_type mem_types[] = { .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE, .domain = DOMAIN_KERNEL, }, + [MT_MEMORY_DTCM] = { + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | + L_PTE_DIRTY | L_PTE_WRITE, + .prot_l1 = PMD_TYPE_TABLE, + .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN, + .domain = DOMAIN_KERNEL, + }, + [MT_MEMORY_ITCM] = { + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | + L_PTE_USER | L_PTE_EXEC, + .prot_l1 = PMD_TYPE_TABLE, + .domain = DOMAIN_IO, + }, }; const struct mem_type *get_mem_type(unsigned int type) diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 72507c630ceb..203a4e944d9e 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -79,15 +79,11 @@ ENTRY(cpu_arm1020_proc_init) * cpu_arm1020_proc_fin() */ ENTRY(cpu_arm1020_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl arm1020_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm1020_reset(loc) diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index d27829805609..1a511e765909 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -79,15 +79,11 @@ ENTRY(cpu_arm1020e_proc_init) * cpu_arm1020e_proc_fin() */ ENTRY(cpu_arm1020e_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl arm1020e_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm1020e_reset(loc) diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index ce13e4a827de..1ffa4eb9c34f 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -68,15 +68,11 @@ ENTRY(cpu_arm1022_proc_init) * cpu_arm1022_proc_fin() */ ENTRY(cpu_arm1022_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl arm1022_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm1022_reset(loc) diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 636672a29c6d..5697c34b95b0 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -68,15 +68,11 @@ ENTRY(cpu_arm1026_proc_init) * cpu_arm1026_proc_fin() */ ENTRY(cpu_arm1026_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl arm1026_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm1026_reset(loc) diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 795dc615f43b..64e0b327c7c5 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -184,8 +184,6 @@ ENTRY(cpu_arm7_proc_init) ENTRY(cpu_arm6_proc_fin) ENTRY(cpu_arm7_proc_fin) - mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, r0 mov r0, #0x31 @ ....S..DP...M mcr p15, 0, r0, c1, c0, 0 @ disable caches mov pc, lr diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 0b62de244666..9d96824134fc 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -54,15 +54,11 @@ ENTRY(cpu_arm720_proc_init) mov pc, lr ENTRY(cpu_arm720_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip mrc p15, 0, r0, c1, c0, 0 bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mcr p15, 0, r1, c7, c7, 0 @ invalidate cache - ldmfd sp!, {pc} + mov pc, lr /* * Function: arm720_proc_do_idle(void) diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index 01860cdeb2ec..6c1a9ab059ae 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -36,15 +36,11 @@ ENTRY(cpu_arm740_switch_mm) * cpu_arm740_proc_fin() */ ENTRY(cpu_arm740_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip mrc p15, 0, r0, c1, c0, 0 bic r0, r0, #0x3f000000 @ bank/f/lock/s bic r0, r0, #0x0000000c @ w-buffer/cache mcr p15, 0, r0, c1, c0, 0 @ disable caches - mcr p15, 0, r0, c7, c0, 0 @ invalidate cache - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm740_reset(loc) diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index 1201b9863829..6a850dbba22e 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -36,8 +36,6 @@ ENTRY(cpu_arm7tdmi_switch_mm) * cpu_arm7tdmi_proc_fin() */ ENTRY(cpu_arm7tdmi_proc_fin) - mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, r0 mov pc, lr /* diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 8be81992645d..86f80aa56216 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -69,19 +69,11 @@ ENTRY(cpu_arm920_proc_init) * cpu_arm920_proc_fin() */ ENTRY(cpu_arm920_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH - bl arm920_flush_kern_cache_all -#else - bl v4wt_flush_kern_cache_all -#endif mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm920_reset(loc) diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index c0ff8e4b1074..f76ce9b62883 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -71,19 +71,11 @@ ENTRY(cpu_arm922_proc_init) * cpu_arm922_proc_fin() */ ENTRY(cpu_arm922_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH - bl arm922_flush_kern_cache_all -#else - bl v4wt_flush_kern_cache_all -#endif mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm922_reset(loc) diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 3c6cffe400f6..657bd3f7c153 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -92,15 +92,11 @@ ENTRY(cpu_arm925_proc_init) * cpu_arm925_proc_fin() */ ENTRY(cpu_arm925_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl arm925_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm925_reset(loc) diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 75b707c9cce1..73f1f3c68910 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -61,15 +61,11 @@ ENTRY(cpu_arm926_proc_init) * cpu_arm926_proc_fin() */ ENTRY(cpu_arm926_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl arm926_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm926_reset(loc) diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index 1af1657819eb..fffb061a45a5 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -37,15 +37,11 @@ ENTRY(cpu_arm940_switch_mm) * cpu_arm940_proc_fin() */ ENTRY(cpu_arm940_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl arm940_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x00001000 @ i-cache bic r0, r0, #0x00000004 @ d-cache mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm940_reset(loc) diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index 1664b6aaff79..249a6053760a 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -44,15 +44,11 @@ ENTRY(cpu_arm946_switch_mm) * cpu_arm946_proc_fin() */ ENTRY(cpu_arm946_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl arm946_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x00001000 @ i-cache bic r0, r0, #0x00000004 @ d-cache mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm946_reset(loc) diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index 28545c29dbcd..db475667fac2 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -36,8 +36,6 @@ ENTRY(cpu_arm9tdmi_switch_mm) * cpu_arm9tdmi_proc_fin() */ ENTRY(cpu_arm9tdmi_proc_fin) - mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, r0 mov pc, lr /* diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index 08f5ac237ad4..7803fdf70029 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -39,17 +39,13 @@ ENTRY(cpu_fa526_proc_init) * cpu_fa526_proc_fin() */ ENTRY(cpu_fa526_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl fa_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches nop nop - ldmfd sp!, {pc} + mov pc, lr /* * cpu_fa526_reset(loc) diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index 53e632343849..b304d0104a4e 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -75,11 +75,6 @@ ENTRY(cpu_feroceon_proc_init) * cpu_feroceon_proc_fin() */ ENTRY(cpu_feroceon_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl feroceon_flush_kern_cache_all - #if defined(CONFIG_CACHE_FEROCEON_L2) && \ !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH) mov r0, #0 @@ -91,7 +86,7 @@ ENTRY(cpu_feroceon_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_feroceon_reset(loc) diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index caa31154e7db..5f6892fcc167 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -51,15 +51,11 @@ ENTRY(cpu_mohawk_proc_init) * cpu_mohawk_proc_fin() */ ENTRY(cpu_mohawk_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl mohawk_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1800 @ ...iz........... bic r0, r0, #0x0006 @ .............ca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_mohawk_reset(loc) diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index 7b706b389906..a201eb04b5e1 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -44,17 +44,13 @@ ENTRY(cpu_sa110_proc_init) * cpu_sa110_proc_fin() */ ENTRY(cpu_sa110_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl v4wb_flush_kern_cache_all @ clean caches -1: mov r0, #0 + mov r0, #0 mcr p15, 0, r0, c15, c2, 2 @ Disable clock switching mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_sa110_reset(loc) diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 5c47760c2064..7ddc4805bf97 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -55,16 +55,12 @@ ENTRY(cpu_sa1100_proc_init) * - Clean and turn off caches. */ ENTRY(cpu_sa1100_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl v4wb_flush_kern_cache_all mcr p15, 0, ip, c15, c2, 2 @ Disable clock switching mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_sa1100_reset(loc) diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 2f5a3c23a0fe..22aac8515196 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -42,14 +42,11 @@ ENTRY(cpu_v6_proc_init) mov pc, lr ENTRY(cpu_v6_proc_fin) - stmfd sp!, {lr} - cpsid if @ disable interrupts - bl v6_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x0006 @ .............ca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_v6_reset(loc) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 8071bcd4c995..6a8506d99ee9 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -45,14 +45,11 @@ ENTRY(cpu_v7_proc_init) ENDPROC(cpu_v7_proc_init) ENTRY(cpu_v7_proc_fin) - stmfd sp!, {lr} - cpsid if @ disable interrupts - bl v7_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x0006 @ .............ca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr ENDPROC(cpu_v7_proc_fin) /* diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index e5797f1c1db7..361a51e49030 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -90,15 +90,11 @@ ENTRY(cpu_xsc3_proc_init) * cpu_xsc3_proc_fin() */ ENTRY(cpu_xsc3_proc_fin) - str lr, [sp, #-4]! - mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE - msr cpsr_c, r0 - bl xsc3_flush_kern_cache_all @ clean caches mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1800 @ ...IZ........... bic r0, r0, #0x0006 @ .............CA. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldr pc, [sp], #4 + mov pc, lr /* * cpu_xsc3_reset(loc) diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 63037e2162f2..14075979bcba 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -124,15 +124,11 @@ ENTRY(cpu_xscale_proc_init) * cpu_xscale_proc_fin() */ ENTRY(cpu_xscale_proc_fin) - str lr, [sp, #-4]! - mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE - msr cpsr_c, r0 - bl xscale_flush_kern_cache_all @ clean caches mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1800 @ ...IZ........... bic r0, r0, #0x0006 @ .............CA. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldr pc, [sp], #4 + mov pc, lr /* * cpu_xscale_reset(loc) diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c index 19e09bdb1b8a..935993e1b1ef 100644 --- a/arch/arm/mm/vmregion.c +++ b/arch/arm/mm/vmregion.c @@ -35,7 +35,8 @@ */ struct arm_vmregion * -arm_vmregion_alloc(struct arm_vmregion_head *head, size_t size, gfp_t gfp) +arm_vmregion_alloc(struct arm_vmregion_head *head, size_t align, + size_t size, gfp_t gfp) { unsigned long addr = head->vm_start, end = head->vm_end - size; unsigned long flags; @@ -58,7 +59,7 @@ arm_vmregion_alloc(struct arm_vmregion_head *head, size_t size, gfp_t gfp) goto nospc; if ((addr + size) <= c->vm_start) goto found; - addr = c->vm_end; + addr = ALIGN(c->vm_end, align); if (addr > end) goto nospc; } diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h index 6b2cdbdf3a85..15e9f044db9f 100644 --- a/arch/arm/mm/vmregion.h +++ b/arch/arm/mm/vmregion.h @@ -21,7 +21,7 @@ struct arm_vmregion { int vm_active; }; -struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, gfp_t); +struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, size_t, gfp_t); struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *, unsigned long); struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *, unsigned long); void arm_vmregion_free(struct arm_vmregion_head *, struct arm_vmregion *); diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index ce31f316ac75..43f2b158237c 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -359,7 +359,7 @@ static void __init iop3xx_atu_debug(void) DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD); DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR); - hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, "imprecise external abort"); + hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, 0, "imprecise external abort"); } /* for platforms that might be host-bus-adapters */ diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c index ee568c8fcbd0..5005990f751f 100644 --- a/drivers/gpio/pl061.c +++ b/drivers/gpio/pl061.c @@ -232,7 +232,7 @@ static void pl061_irq_handler(unsigned irq, struct irq_desc *desc) desc->chip->unmask(irq); } -static int __init pl061_probe(struct amba_device *dev, struct amba_id *id) +static int pl061_probe(struct amba_device *dev, struct amba_id *id) { struct pl061_platform_data *pdata; struct pl061_gpio *chip; @@ -333,7 +333,7 @@ free_mem: return ret; } -static struct amba_id pl061_ids[] __initdata = { +static struct amba_id pl061_ids[] = { { .id = 0x00041061, .mask = 0x000fffff, diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 4917af96bae1..7edae83603dd 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -26,7 +26,6 @@ #include <linux/amba/mmci.h> #include <linux/regulator/consumer.h> -#include <asm/cacheflush.h> #include <asm/div64.h> #include <asm/io.h> #include <asm/sizes.h> @@ -37,12 +36,39 @@ static unsigned int fmax = 515633; +/** + * struct variant_data - MMCI variant-specific quirks + * @clkreg: default value for MCICLOCK register + * @clkreg_enable: enable value for MMCICLOCK register + * @datalength_bits: number of bits in the MMCIDATALENGTH register + */ +struct variant_data { + unsigned int clkreg; + unsigned int clkreg_enable; + unsigned int datalength_bits; +}; + +static struct variant_data variant_arm = { + .datalength_bits = 16, +}; + +static struct variant_data variant_u300 = { + .clkreg_enable = 1 << 13, /* HWFCEN */ + .datalength_bits = 16, +}; + +static struct variant_data variant_ux500 = { + .clkreg = MCI_CLK_ENABLE, + .clkreg_enable = 1 << 14, /* HWFCEN */ + .datalength_bits = 24, +}; /* * This must be called with host->lock held */ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) { - u32 clk = 0; + struct variant_data *variant = host->variant; + u32 clk = variant->clkreg; if (desired) { if (desired >= host->mclk) { @@ -54,8 +80,8 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) clk = 255; host->cclk = host->mclk / (2 * (clk + 1)); } - if (host->hw_designer == AMBA_VENDOR_ST) - clk |= MCI_ST_FCEN; /* Bug fix in ST IP block */ + + clk |= variant->clkreg_enable; clk |= MCI_CLK_ENABLE; /* This hasn't proven to be worthwhile */ /* clk |= MCI_CLK_PWRSAVE; */ @@ -98,6 +124,18 @@ static void mmci_stop_data(struct mmci_host *host) host->data = NULL; } +static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data) +{ + unsigned int flags = SG_MITER_ATOMIC; + + if (data->flags & MMC_DATA_READ) + flags |= SG_MITER_TO_SG; + else + flags |= SG_MITER_FROM_SG; + + sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); +} + static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) { unsigned int datactrl, timeout, irqmask; @@ -109,7 +147,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) data->blksz, data->blocks, data->flags); host->data = data; - host->size = data->blksz; + host->size = data->blksz * data->blocks; host->data_xfered = 0; mmci_init_sg(host, data); @@ -210,8 +248,17 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, * We hit an error condition. Ensure that any data * partially written to a page is properly coherent. */ - if (host->sg_len && data->flags & MMC_DATA_READ) - flush_dcache_page(sg_page(host->sg_ptr)); + if (data->flags & MMC_DATA_READ) { + struct sg_mapping_iter *sg_miter = &host->sg_miter; + unsigned long flags; + + local_irq_save(flags); + if (sg_miter_next(sg_miter)) { + flush_dcache_page(sg_miter->page); + sg_miter_stop(sg_miter); + } + local_irq_restore(flags); + } } if (status & MCI_DATAEND) { mmci_stop_data(host); @@ -314,15 +361,18 @@ static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int rem static irqreturn_t mmci_pio_irq(int irq, void *dev_id) { struct mmci_host *host = dev_id; + struct sg_mapping_iter *sg_miter = &host->sg_miter; void __iomem *base = host->base; + unsigned long flags; u32 status; status = readl(base + MMCISTATUS); dev_dbg(mmc_dev(host->mmc), "irq1 (pio) %08x\n", status); + local_irq_save(flags); + do { - unsigned long flags; unsigned int remain, len; char *buffer; @@ -336,11 +386,11 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) if (!(status & (MCI_TXFIFOHALFEMPTY|MCI_RXDATAAVLBL))) break; - /* - * Map the current scatter buffer. - */ - buffer = mmci_kmap_atomic(host, &flags) + host->sg_off; - remain = host->sg_ptr->length - host->sg_off; + if (!sg_miter_next(sg_miter)) + break; + + buffer = sg_miter->addr; + remain = sg_miter->length; len = 0; if (status & MCI_RXACTIVE) @@ -348,31 +398,24 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) if (status & MCI_TXACTIVE) len = mmci_pio_write(host, buffer, remain, status); - /* - * Unmap the buffer. - */ - mmci_kunmap_atomic(host, buffer, &flags); + sg_miter->consumed = len; - host->sg_off += len; host->size -= len; remain -= len; if (remain) break; - /* - * If we were reading, and we have completed this - * page, ensure that the data cache is coherent. - */ if (status & MCI_RXACTIVE) - flush_dcache_page(sg_page(host->sg_ptr)); - - if (!mmci_next_sg(host)) - break; + flush_dcache_page(sg_miter->page); status = readl(base + MMCISTATUS); } while (1); + sg_miter_stop(sg_miter); + + local_irq_restore(flags); + /* * If we're nearing the end of the read, switch to * "any data available" mode. @@ -477,16 +520,9 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) /* This implicitly enables the regulator */ mmc_regulator_set_ocr(host->vcc, ios->vdd); #endif - /* - * The translate_vdd function is not used if you have - * an external regulator, or your design is really weird. - * Using it would mean sending in power control BOTH using - * a regulator AND the 4 MMCIPWR bits. If we don't have - * a regulator, we might have some other platform specific - * power control behind this translate function. - */ - if (!host->vcc && host->plat->translate_vdd) - pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd); + if (host->plat->vdd_handler) + pwr |= host->plat->vdd_handler(mmc_dev(mmc), ios->vdd, + ios->power_mode); /* The ST version does not have this, fall through to POWER_ON */ if (host->hw_designer != AMBA_VENDOR_ST) { pwr |= MCI_PWR_UP; @@ -551,21 +587,10 @@ static const struct mmc_host_ops mmci_ops = { .get_cd = mmci_get_cd, }; -static void mmci_check_status(unsigned long data) -{ - struct mmci_host *host = (struct mmci_host *)data; - unsigned int status = mmci_get_cd(host->mmc); - - if (status ^ host->oldstat) - mmc_detect_change(host->mmc, 0); - - host->oldstat = status; - mod_timer(&host->timer, jiffies + HZ); -} - static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) { struct mmci_platform_data *plat = dev->dev.platform_data; + struct variant_data *variant = id->data; struct mmci_host *host; struct mmc_host *mmc; int ret; @@ -609,6 +634,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) goto clk_free; host->plat = plat; + host->variant = variant; host->mclk = clk_get_rate(host->clk); /* * According to the spec, mclk is max 100 MHz, @@ -669,6 +695,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) if (host->vcc == NULL) mmc->ocr_avail = plat->ocr_mask; mmc->caps = plat->capabilities; + mmc->caps |= MMC_CAP_NEEDS_POLL; /* * We can do SGIO @@ -677,10 +704,11 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) mmc->max_phys_segs = NR_SG; /* - * Since we only have a 16-bit data length register, we must - * ensure that we don't exceed 2^16-1 bytes in a single request. + * Since only a certain number of bits are valid in the data length + * register, we must ensure that we don't exceed 2^num-1 bytes in a + * single request. */ - mmc->max_req_size = 65535; + mmc->max_req_size = (1 << variant->datalength_bits) - 1; /* * Set the maximum segment size. Since we aren't doing DMA @@ -734,7 +762,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) writel(MCI_IRQENABLE, host->base + MMCIMASK0); amba_set_drvdata(dev, mmc); - host->oldstat = mmci_get_cd(host->mmc); mmc_add_host(mmc); @@ -742,12 +769,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) mmc_hostname(mmc), amba_rev(dev), amba_config(dev), (unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]); - init_timer(&host->timer); - host->timer.data = (unsigned long)host; - host->timer.function = mmci_check_status; - host->timer.expires = jiffies + HZ; - add_timer(&host->timer); - return 0; irq0_free: @@ -781,8 +802,6 @@ static int __devexit mmci_remove(struct amba_device *dev) if (mmc) { struct mmci_host *host = mmc_priv(mmc); - del_timer_sync(&host->timer); - mmc_remove_host(mmc); writel(0, host->base + MMCIMASK0); @@ -856,19 +875,28 @@ static struct amba_id mmci_ids[] = { { .id = 0x00041180, .mask = 0x000fffff, + .data = &variant_arm, }, { .id = 0x00041181, .mask = 0x000fffff, + .data = &variant_arm, }, /* ST Micro variants */ { .id = 0x00180180, .mask = 0x00ffffff, + .data = &variant_u300, }, { .id = 0x00280180, .mask = 0x00ffffff, + .data = &variant_u300, + }, + { + .id = 0x00480180, + .mask = 0x00ffffff, + .data = &variant_ux500, }, { 0, 0 }, }; diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index d77062e5e3af..68970cfb81e1 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -28,8 +28,6 @@ #define MCI_4BIT_BUS (1 << 11) /* 8bit wide buses supported in ST Micro versions */ #define MCI_ST_8BIT_BUS (1 << 12) -/* HW flow control on the ST Micro version */ -#define MCI_ST_FCEN (1 << 13) #define MMCIARGUMENT 0x008 #define MMCICOMMAND 0x00c @@ -145,6 +143,7 @@ #define NR_SG 16 struct clk; +struct variant_data; struct mmci_host { void __iomem *base; @@ -164,6 +163,7 @@ struct mmci_host { unsigned int cclk; u32 pwr; struct mmci_platform_data *plat; + struct variant_data *variant; u8 hw_designer; u8 hw_revision:4; @@ -171,42 +171,9 @@ struct mmci_host { struct timer_list timer; unsigned int oldstat; - unsigned int sg_len; - /* pio stuff */ - struct scatterlist *sg_ptr; - unsigned int sg_off; + struct sg_mapping_iter sg_miter; unsigned int size; struct regulator *vcc; }; -static inline void mmci_init_sg(struct mmci_host *host, struct mmc_data *data) -{ - /* - * Ideally, we want the higher levels to pass us a scatter list. - */ - host->sg_len = data->sg_len; - host->sg_ptr = data->sg; - host->sg_off = 0; -} - -static inline int mmci_next_sg(struct mmci_host *host) -{ - host->sg_ptr++; - host->sg_off = 0; - return --host->sg_len; -} - -static inline char *mmci_kmap_atomic(struct mmci_host *host, unsigned long *flags) -{ - struct scatterlist *sg = host->sg_ptr; - - local_irq_save(*flags); - return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset; -} - -static inline void mmci_kunmap_atomic(struct mmci_host *host, void *buffer, unsigned long *flags) -{ - kunmap_atomic(buffer, KM_BIO_SRC_IRQ); - local_irq_restore(*flags); -} diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index 3587d9922f28..71bbefc3544e 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -456,7 +456,7 @@ static struct rtc_class_ops stv2_pl031_ops = { .irq_set_freq = pl031_irq_set_freq, }; -static struct amba_id pl031_ids[] __initdata = { +static struct amba_id pl031_ids[] = { { .id = 0x00041031, .mask = 0x000fffff, diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index b09a638d051f..50441ffe8e38 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -782,7 +782,7 @@ static int pl010_resume(struct amba_device *dev) return 0; } -static struct amba_id pl010_ids[] __initdata = { +static struct amba_id pl010_ids[] = { { .id = 0x00041010, .mask = 0x000fffff, diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index eb4cb480b93e..6ca7a44f29c2 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -69,9 +69,12 @@ struct uart_amba_port { struct uart_port port; struct clk *clk; - unsigned int im; /* interrupt mask */ + unsigned int im; /* interrupt mask */ unsigned int old_status; - unsigned int ifls; /* vendor-specific */ + unsigned int ifls; /* vendor-specific */ + unsigned int lcrh_tx; /* vendor-specific */ + unsigned int lcrh_rx; /* vendor-specific */ + bool oversampling; /* vendor-specific */ bool autorts; }; @@ -79,16 +82,25 @@ struct uart_amba_port { struct vendor_data { unsigned int ifls; unsigned int fifosize; + unsigned int lcrh_tx; + unsigned int lcrh_rx; + bool oversampling; }; static struct vendor_data vendor_arm = { .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, .fifosize = 16, + .lcrh_tx = UART011_LCRH, + .lcrh_rx = UART011_LCRH, + .oversampling = false, }; static struct vendor_data vendor_st = { .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, .fifosize = 64, + .lcrh_tx = ST_UART011_LCRH_TX, + .lcrh_rx = ST_UART011_LCRH_RX, + .oversampling = true, }; static void pl011_stop_tx(struct uart_port *port) @@ -327,12 +339,12 @@ static void pl011_break_ctl(struct uart_port *port, int break_state) unsigned int lcr_h; spin_lock_irqsave(&uap->port.lock, flags); - lcr_h = readw(uap->port.membase + UART011_LCRH); + lcr_h = readw(uap->port.membase + uap->lcrh_tx); if (break_state == -1) lcr_h |= UART01x_LCRH_BRK; else lcr_h &= ~UART01x_LCRH_BRK; - writew(lcr_h, uap->port.membase + UART011_LCRH); + writew(lcr_h, uap->port.membase + uap->lcrh_tx); spin_unlock_irqrestore(&uap->port.lock, flags); } @@ -393,7 +405,17 @@ static int pl011_startup(struct uart_port *port) writew(cr, uap->port.membase + UART011_CR); writew(0, uap->port.membase + UART011_FBRD); writew(1, uap->port.membase + UART011_IBRD); - writew(0, uap->port.membase + UART011_LCRH); + writew(0, uap->port.membase + uap->lcrh_rx); + if (uap->lcrh_tx != uap->lcrh_rx) { + int i; + /* + * Wait 10 PCLKs before writing LCRH_TX register, + * to get this delay write read only register 10 times + */ + for (i = 0; i < 10; ++i) + writew(0xff, uap->port.membase + UART011_MIS); + writew(0, uap->port.membase + uap->lcrh_tx); + } writew(0, uap->port.membase + UART01x_DR); while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY) barrier(); @@ -422,10 +444,19 @@ static int pl011_startup(struct uart_port *port) return retval; } +static void pl011_shutdown_channel(struct uart_amba_port *uap, + unsigned int lcrh) +{ + unsigned long val; + + val = readw(uap->port.membase + lcrh); + val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); + writew(val, uap->port.membase + lcrh); +} + static void pl011_shutdown(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned long val; /* * disable all interrupts @@ -450,9 +481,9 @@ static void pl011_shutdown(struct uart_port *port) /* * disable break condition and fifos */ - val = readw(uap->port.membase + UART011_LCRH); - val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); - writew(val, uap->port.membase + UART011_LCRH); + pl011_shutdown_channel(uap, uap->lcrh_rx); + if (uap->lcrh_rx != uap->lcrh_tx) + pl011_shutdown_channel(uap, uap->lcrh_tx); /* * Shut down the clock producer @@ -472,8 +503,13 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, /* * Ask the core to calculate the divisor for us. */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = port->uartclk * 4 / baud; + baud = uart_get_baud_rate(port, termios, old, 0, + port->uartclk/(uap->oversampling ? 8 : 16)); + + if (baud > port->uartclk/16) + quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud); + else + quot = DIV_ROUND_CLOSEST(port->uartclk * 4, baud); switch (termios->c_cflag & CSIZE) { case CS5: @@ -552,6 +588,13 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, uap->autorts = false; } + if (uap->oversampling) { + if (baud > port->uartclk/16) + old_cr |= ST_UART011_CR_OVSFACT; + else + old_cr &= ~ST_UART011_CR_OVSFACT; + } + /* Set baud rate */ writew(quot & 0x3f, port->membase + UART011_FBRD); writew(quot >> 6, port->membase + UART011_IBRD); @@ -561,7 +604,17 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L * ----------^----------^----------^----------^----- */ - writew(lcr_h, port->membase + UART011_LCRH); + writew(lcr_h, port->membase + uap->lcrh_rx); + if (uap->lcrh_rx != uap->lcrh_tx) { + int i; + /* + * Wait 10 PCLKs before writing LCRH_TX register, + * to get this delay write read only register 10 times + */ + for (i = 0; i < 10; ++i) + writew(0xff, uap->port.membase + UART011_MIS); + writew(lcr_h, port->membase + uap->lcrh_tx); + } writew(old_cr, port->membase + UART011_CR); spin_unlock_irqrestore(&port->lock, flags); @@ -688,7 +741,7 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud, if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) { unsigned int lcr_h, ibrd, fbrd; - lcr_h = readw(uap->port.membase + UART011_LCRH); + lcr_h = readw(uap->port.membase + uap->lcrh_tx); *parity = 'n'; if (lcr_h & UART01x_LCRH_PEN) { @@ -707,6 +760,12 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud, fbrd = readw(uap->port.membase + UART011_FBRD); *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd); + + if (uap->oversampling) { + if (readw(uap->port.membase + UART011_CR) + & ST_UART011_CR_OVSFACT) + *baud *= 2; + } } } @@ -800,6 +859,9 @@ static int pl011_probe(struct amba_device *dev, struct amba_id *id) } uap->ifls = vendor->ifls; + uap->lcrh_rx = vendor->lcrh_rx; + uap->lcrh_tx = vendor->lcrh_tx; + uap->oversampling = vendor->oversampling; uap->port.dev = &dev->dev; uap->port.mapbase = dev->res.start; uap->port.membase = base; @@ -868,7 +930,7 @@ static int pl011_resume(struct amba_device *dev) } #endif -static struct amba_id pl011_ids[] __initdata = { +static struct amba_id pl011_ids[] = { { .id = 0x00041011, .mask = 0x000fffff, diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index 7e466fe72025..ca84ce70d5d5 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -15,9 +15,10 @@ * @ocr_mask: available voltages on the 4 pins from the block, this * is ignored if a regulator is used, see the MMC_VDD_* masks in * mmc/host.h - * @translate_vdd: a callback function to translate a MMC_VDD_* - * mask into a value to be binary or:ed and written into the - * MMCIPWR register of the block + * @vdd_handler: a callback function to translate a MMC_VDD_* + * mask into a value to be binary (or set some other custom bits + * in MMCIPWR) or:ed and written into the MMCIPWR register of the + * block. May also control external power based on the power_mode. * @status: if no GPIO read function was given to the block in * gpio_wp (below) this function will be called to determine * whether a card is present in the MMC slot or not @@ -29,7 +30,8 @@ struct mmci_platform_data { unsigned int f_max; unsigned int ocr_mask; - u32 (*translate_vdd)(struct device *, unsigned int); + u32 (*vdd_handler)(struct device *, unsigned int vdd, + unsigned char power_mode); unsigned int (*status)(struct device *); int gpio_wp; int gpio_cd; diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index 5a5a7fd62490..e1b634b635f2 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -38,10 +38,12 @@ #define UART01x_FR 0x18 /* Flag register (Read only). */ #define UART010_IIR 0x1C /* Interrupt indentification register (Read). */ #define UART010_ICR 0x1C /* Interrupt clear register (Write). */ +#define ST_UART011_LCRH_RX 0x1C /* Rx line control register. */ #define UART01x_ILPR 0x20 /* IrDA low power counter register. */ #define UART011_IBRD 0x24 /* Integer baud rate divisor register. */ #define UART011_FBRD 0x28 /* Fractional baud rate divisor register. */ #define UART011_LCRH 0x2c /* Line control register. */ +#define ST_UART011_LCRH_TX 0x2c /* Tx Line control register. */ #define UART011_CR 0x30 /* Control register. */ #define UART011_IFLS 0x34 /* Interrupt fifo level select. */ #define UART011_IMSC 0x38 /* Interrupt mask. */ @@ -84,6 +86,7 @@ #define UART010_CR_TIE 0x0020 #define UART010_CR_RIE 0x0010 #define UART010_CR_MSIE 0x0008 +#define ST_UART011_CR_OVSFACT 0x0008 /* Oversampling factor */ #define UART01x_CR_IIRLP 0x0004 /* SIR low power mode */ #define UART01x_CR_SIREN 0x0002 /* SIR enable */ #define UART01x_CR_UARTEN 0x0001 /* UART enable */ diff --git a/lib/atomic64_test.c b/lib/atomic64_test.c index 250ed11d3ed2..44524cc8c32a 100644 --- a/lib/atomic64_test.c +++ b/lib/atomic64_test.c @@ -114,7 +114,7 @@ static __init int test_atomic64(void) BUG_ON(v.counter != r); #if defined(CONFIG_X86) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \ - defined(CONFIG_S390) || defined(_ASM_GENERIC_ATOMIC64_H) + defined(CONFIG_S390) || defined(_ASM_GENERIC_ATOMIC64_H) || defined(CONFIG_ARM) INIT(onestwos); BUG_ON(atomic64_dec_if_positive(&v) != (onestwos - 1)); r -= one; |