aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/accounting/getdelays.c2
-rw-r--r--Documentation/vm/numa_memory_policy.txt332
-rw-r--r--MAINTAINERS2
-rw-r--r--arch/h8300/kernel/process.c1
-rw-r--r--arch/h8300/kernel/sys_h8300.c1
-rw-r--r--arch/i386/xen/xen-head.S6
-rw-r--r--arch/m68k/kernel/setup.c2
-rw-r--r--arch/m68k/kernel/vmlinux-std.lds4
-rw-r--r--arch/m68k/mm/motorola.c6
-rw-r--r--arch/m68knommu/kernel/process.c1
-rw-r--r--arch/m68knommu/kernel/sys_m68k.c1
-rw-r--r--arch/um/drivers/ubd_kern.c4
-rw-r--r--drivers/ata/pata_it821x.c2
-rw-r--r--drivers/auxdisplay/cfag12864b.c2
-rw-r--r--drivers/block/Kconfig1
-rw-r--r--drivers/char/ipmi/ipmi_si_intf.c2
-rw-r--r--drivers/char/keyboard.c4
-rw-r--r--drivers/char/synclink_gt.c4
-rw-r--r--drivers/char/tpm/tpm.c2
-rw-r--r--drivers/char/tpm/tpm.h2
-rw-r--r--drivers/char/tpm/tpm_atmel.c2
-rw-r--r--drivers/char/tpm/tpm_atmel.h2
-rw-r--r--drivers/char/tpm/tpm_bios.c2
-rw-r--r--drivers/char/tpm/tpm_nsc.c2
-rw-r--r--drivers/char/tpm/tpm_tis.c2
-rw-r--r--drivers/input/misc/Kconfig1
-rw-r--r--drivers/lguest/Kconfig2
-rw-r--r--drivers/macintosh/mac_hid.c1
-rw-r--r--drivers/macintosh/via-pmu68k.c240
-rw-r--r--drivers/md/raid1.c25
-rw-r--r--drivers/rtc/rtc-m41t80.c2
-rw-r--r--drivers/rtc/rtc-max6902.c6
-rw-r--r--drivers/scsi/Kconfig10
-rw-r--r--drivers/serial/8250.c85
-rw-r--r--drivers/serial/8250_pci.c192
-rw-r--r--drivers/serial/serial_core.c7
-rw-r--r--drivers/serial/serial_txx9.c14
-rw-r--r--drivers/video/au1100fb.c92
-rw-r--r--drivers/video/console/newport_con.c3
-rw-r--r--drivers/video/imsttfb.c2
-rw-r--r--drivers/w1/w1_int.c10
-rw-r--r--drivers/zorro/zorro-sysfs.c2
-rw-r--r--fs/autofs4/root.c31
-rw-r--r--fs/ecryptfs/inode.c4
-rw-r--r--fs/exec.c12
-rw-r--r--fs/signalfd.c14
-rw-r--r--include/asm-m68k/ioctls.h4
-rw-r--r--include/asm-m68k/page.h10
-rw-r--r--include/asm-m68k/processor.h4
-rw-r--r--include/asm-m68k/termbits.h5
-rw-r--r--include/asm-m68k/termios.h6
-rw-r--r--include/asm-m68knommu/pgtable.h2
-rw-r--r--include/linux/kbd_kern.h3
-rw-r--r--include/linux/mempolicy.h2
-rw-r--r--include/linux/mm.h2
-rw-r--r--include/linux/mmzone.h18
-rw-r--r--include/linux/security.h20
-rw-r--r--include/linux/selection.h2
-rw-r--r--include/linux/serial_reg.h1
-rw-r--r--kernel/auditsc.c2
-rw-r--r--kernel/futex.c1
-rw-r--r--kernel/irq/manage.c2
-rw-r--r--kernel/posix-timers.c9
-rw-r--r--kernel/signal.c4
-rw-r--r--lib/Kconfig3
-rw-r--r--lib/Makefile3
-rw-r--r--mm/hugetlb.c2
-rw-r--r--mm/mempolicy.c2
-rw-r--r--mm/mmap.c6
-rw-r--r--mm/nommu.c2
-rw-r--r--mm/page_alloc.c13
-rw-r--r--mm/slab.c14
-rw-r--r--mm/slub.c15
-rw-r--r--mm/sparse.c14
-rw-r--r--mm/vmscan.c69
-rw-r--r--security/commoncap.c4
-rw-r--r--security/dummy.c4
-rw-r--r--security/selinux/hooks.c4
78 files changed, 945 insertions, 453 deletions
diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index 24c5aade8998..cbee3a27f768 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -196,7 +196,7 @@ void print_delayacct(struct taskstats *t)
"IO %15s%15s\n"
" %15llu%15llu\n"
"MEM %15s%15s\n"
- " %15llu%15llu\n"
+ " %15llu%15llu\n",
"count", "real total", "virtual total", "delay total",
t->cpu_count, t->cpu_run_real_total, t->cpu_run_virtual_total,
t->cpu_delay_total,
diff --git a/Documentation/vm/numa_memory_policy.txt b/Documentation/vm/numa_memory_policy.txt
new file mode 100644
index 000000000000..8242f52d0f22
--- /dev/null
+++ b/Documentation/vm/numa_memory_policy.txt
@@ -0,0 +1,332 @@
+
+What is Linux Memory Policy?
+
+In the Linux kernel, "memory policy" determines from which node the kernel will
+allocate memory in a NUMA system or in an emulated NUMA system. Linux has
+supported platforms with Non-Uniform Memory Access architectures since 2.4.?.
+The current memory policy support was added to Linux 2.6 around May 2004. This
+document attempts to describe the concepts and APIs of the 2.6 memory policy
+support.
+
+Memory policies should not be confused with cpusets (Documentation/cpusets.txt)
+which is an administrative mechanism for restricting the nodes from which
+memory may be allocated by a set of processes. Memory policies are a
+programming interface that a NUMA-aware application can take advantage of. When
+both cpusets and policies are applied to a task, the restrictions of the cpuset
+takes priority. See "MEMORY POLICIES AND CPUSETS" below for more details.
+
+MEMORY POLICY CONCEPTS
+
+Scope of Memory Policies
+
+The Linux kernel supports _scopes_ of memory policy, described here from
+most general to most specific:
+
+ System Default Policy: this policy is "hard coded" into the kernel. It
+ is the policy that governs all page allocations that aren't controlled
+ by one of the more specific policy scopes discussed below. When the
+ system is "up and running", the system default policy will use "local
+ allocation" described below. However, during boot up, the system
+ default policy will be set to interleave allocations across all nodes
+ with "sufficient" memory, so as not to overload the initial boot node
+ with boot-time allocations.
+
+ Task/Process Policy: this is an optional, per-task policy. When defined
+ for a specific task, this policy controls all page allocations made by or
+ on behalf of the task that aren't controlled by a more specific scope.
+ If a task does not define a task policy, then all page allocations that
+ would have been controlled by the task policy "fall back" to the System
+ Default Policy.
+
+ The task policy applies to the entire address space of a task. Thus,
+ it is inheritable, and indeed is inherited, across both fork()
+ [clone() w/o the CLONE_VM flag] and exec*(). This allows a parent task
+ to establish the task policy for a child task exec()'d from an
+ executable image that has no awareness of memory policy. See the
+ MEMORY POLICY APIS section, below, for an overview of the system call
+ that a task may use to set/change it's task/process policy.
+
+ In a multi-threaded task, task policies apply only to the thread
+ [Linux kernel task] that installs the policy and any threads
+ subsequently created by that thread. Any sibling threads existing
+ at the time a new task policy is installed retain their current
+ policy.
+
+ A task policy applies only to pages allocated after the policy is
+ installed. Any pages already faulted in by the task when the task
+ changes its task policy remain where they were allocated based on
+ the policy at the time they were allocated.
+
+ VMA Policy: A "VMA" or "Virtual Memory Area" refers to a range of a task's
+ virtual adddress space. A task may define a specific policy for a range
+ of its virtual address space. See the MEMORY POLICIES APIS section,
+ below, for an overview of the mbind() system call used to set a VMA
+ policy.
+
+ A VMA policy will govern the allocation of pages that back this region of
+ the address space. Any regions of the task's address space that don't
+ have an explicit VMA policy will fall back to the task policy, which may
+ itself fall back to the System Default Policy.
+
+ VMA policies have a few complicating details:
+
+ VMA policy applies ONLY to anonymous pages. These include pages
+ allocated for anonymous segments, such as the task stack and heap, and
+ any regions of the address space mmap()ed with the MAP_ANONYMOUS flag.
+ If a VMA policy is applied to a file mapping, it will be ignored if
+ the mapping used the MAP_SHARED flag. If the file mapping used the
+ MAP_PRIVATE flag, the VMA policy will only be applied when an
+ anonymous page is allocated on an attempt to write to the mapping--
+ i.e., at Copy-On-Write.
+
+ VMA policies are shared between all tasks that share a virtual address
+ space--a.k.a. threads--independent of when the policy is installed; and
+ they are inherited across fork(). However, because VMA policies refer
+ to a specific region of a task's address space, and because the address
+ space is discarded and recreated on exec*(), VMA policies are NOT
+ inheritable across exec(). Thus, only NUMA-aware applications may
+ use VMA policies.
+
+ A task may install a new VMA policy on a sub-range of a previously
+ mmap()ed region. When this happens, Linux splits the existing virtual
+ memory area into 2 or 3 VMAs, each with it's own policy.
+
+ By default, VMA policy applies only to pages allocated after the policy
+ is installed. Any pages already faulted into the VMA range remain
+ where they were allocated based on the policy at the time they were
+ allocated. However, since 2.6.16, Linux supports page migration via
+ the mbind() system call, so that page contents can be moved to match
+ a newly installed policy.
+
+ Shared Policy: Conceptually, shared policies apply to "memory objects"
+ mapped shared into one or more tasks' distinct address spaces. An
+ application installs a shared policies the same way as VMA policies--using
+ the mbind() system call specifying a range of virtual addresses that map
+ the shared object. However, unlike VMA policies, which can be considered
+ to be an attribute of a range of a task's address space, shared policies
+ apply directly to the shared object. Thus, all tasks that attach to the
+ object share the policy, and all pages allocated for the shared object,
+ by any task, will obey the shared policy.
+
+ As of 2.6.22, only shared memory segments, created by shmget() or
+ mmap(MAP_ANONYMOUS|MAP_SHARED), support shared policy. When shared
+ policy support was added to Linux, the associated data structures were
+ added to hugetlbfs shmem segments. At the time, hugetlbfs did not
+ support allocation at fault time--a.k.a lazy allocation--so hugetlbfs
+ shmem segments were never "hooked up" to the shared policy support.
+ Although hugetlbfs segments now support lazy allocation, their support
+ for shared policy has not been completed.
+
+ As mentioned above [re: VMA policies], allocations of page cache
+ pages for regular files mmap()ed with MAP_SHARED ignore any VMA
+ policy installed on the virtual address range backed by the shared
+ file mapping. Rather, shared page cache pages, including pages backing
+ private mappings that have not yet been written by the task, follow
+ task policy, if any, else System Default Policy.
+
+ The shared policy infrastructure supports different policies on subset
+ ranges of the shared object. However, Linux still splits the VMA of
+ the task that installs the policy for each range of distinct policy.
+ Thus, different tasks that attach to a shared memory segment can have
+ different VMA configurations mapping that one shared object. This
+ can be seen by examining the /proc/<pid>/numa_maps of tasks sharing
+ a shared memory region, when one task has installed shared policy on
+ one or more ranges of the region.
+
+Components of Memory Policies
+
+ A Linux memory policy is a tuple consisting of a "mode" and an optional set
+ of nodes. The mode determine the behavior of the policy, while the
+ optional set of nodes can be viewed as the arguments to the behavior.
+
+ Internally, memory policies are implemented by a reference counted
+ structure, struct mempolicy. Details of this structure will be discussed
+ in context, below, as required to explain the behavior.
+
+ Note: in some functions AND in the struct mempolicy itself, the mode
+ is called "policy". However, to avoid confusion with the policy tuple,
+ this document will continue to use the term "mode".
+
+ Linux memory policy supports the following 4 behavioral modes:
+
+ Default Mode--MPOL_DEFAULT: The behavior specified by this mode is
+ context or scope dependent.
+
+ As mentioned in the Policy Scope section above, during normal
+ system operation, the System Default Policy is hard coded to
+ contain the Default mode.
+
+ In this context, default mode means "local" allocation--that is
+ attempt to allocate the page from the node associated with the cpu
+ where the fault occurs. If the "local" node has no memory, or the
+ node's memory can be exhausted [no free pages available], local
+ allocation will "fallback to"--attempt to allocate pages from--
+ "nearby" nodes, in order of increasing "distance".
+
+ Implementation detail -- subject to change: "Fallback" uses
+ a per node list of sibling nodes--called zonelists--built at
+ boot time, or when nodes or memory are added or removed from
+ the system [memory hotplug]. These per node zonelist are
+ constructed with nodes in order of increasing distance based
+ on information provided by the platform firmware.
+
+ When a task/process policy or a shared policy contains the Default
+ mode, this also means "local allocation", as described above.
+
+ In the context of a VMA, Default mode means "fall back to task
+ policy"--which may or may not specify Default mode. Thus, Default
+ mode can not be counted on to mean local allocation when used
+ on a non-shared region of the address space. However, see
+ MPOL_PREFERRED below.
+
+ The Default mode does not use the optional set of nodes.
+
+ MPOL_BIND: This mode specifies that memory must come from the
+ set of nodes specified by the policy.
+
+ The memory policy APIs do not specify an order in which the nodes
+ will be searched. However, unlike "local allocation", the Bind
+ policy does not consider the distance between the nodes. Rather,
+ allocations will fallback to the nodes specified by the policy in
+ order of numeric node id. Like everything in Linux, this is subject
+ to change.
+
+ MPOL_PREFERRED: This mode specifies that the allocation should be
+ attempted from the single node specified in the policy. If that
+ allocation fails, the kernel will search other nodes, exactly as
+ it would for a local allocation that started at the preferred node
+ in increasing distance from the preferred node. "Local" allocation
+ policy can be viewed as a Preferred policy that starts at the node
+ containing the cpu where the allocation takes place.
+
+ Internally, the Preferred policy uses a single node--the
+ preferred_node member of struct mempolicy. A "distinguished
+ value of this preferred_node, currently '-1', is interpreted
+ as "the node containing the cpu where the allocation takes
+ place"--local allocation. This is the way to specify
+ local allocation for a specific range of addresses--i.e. for
+ VMA policies.
+
+ MPOL_INTERLEAVED: This mode specifies that page allocations be
+ interleaved, on a page granularity, across the nodes specified in
+ the policy. This mode also behaves slightly differently, based on
+ the context where it is used:
+
+ For allocation of anonymous pages and shared memory pages,
+ Interleave mode indexes the set of nodes specified by the policy
+ using the page offset of the faulting address into the segment
+ [VMA] containing the address modulo the number of nodes specified
+ by the policy. It then attempts to allocate a page, starting at
+ the selected node, as if the node had been specified by a Preferred
+ policy or had been selected by a local allocation. That is,
+ allocation will follow the per node zonelist.
+
+ For allocation of page cache pages, Interleave mode indexes the set
+ of nodes specified by the policy using a node counter maintained
+ per task. This counter wraps around to the lowest specified node
+ after it reaches the highest specified node. This will tend to
+ spread the pages out over the nodes specified by the policy based
+ on the order in which they are allocated, rather than based on any
+ page offset into an address range or file. During system boot up,
+ the temporary interleaved system default policy works in this
+ mode.
+
+MEMORY POLICY APIs
+
+Linux supports 3 system calls for controlling memory policy. These APIS
+always affect only the calling task, the calling task's address space, or
+some shared object mapped into the calling task's address space.
+
+ Note: the headers that define these APIs and the parameter data types
+ for user space applications reside in a package that is not part of
+ the Linux kernel. The kernel system call interfaces, with the 'sys_'
+ prefix, are defined in <linux/syscalls.h>; the mode and flag
+ definitions are defined in <linux/mempolicy.h>.
+
+Set [Task] Memory Policy:
+
+ long set_mempolicy(int mode, const unsigned long *nmask,
+ unsigned long maxnode);
+
+ Set's the calling task's "task/process memory policy" to mode
+ specified by the 'mode' argument and the set of nodes defined
+ by 'nmask'. 'nmask' points to a bit mask of node ids containing
+ at least 'maxnode' ids.
+
+ See the set_mempolicy(2) man page for more details
+
+
+Get [Task] Memory Policy or Related Information
+
+ long get_mempolicy(int *mode,
+ const unsigned long *nmask, unsigned long maxnode,
+ void *addr, int flags);
+
+ Queries the "task/process memory policy" of the calling task, or
+ the policy or location of a specified virtual address, depending
+ on the 'flags' argument.
+
+ See the get_mempolicy(2) man page for more details
+
+
+Install VMA/Shared Policy for a Range of Task's Address Space
+
+ long mbind(void *start, unsigned long len, int mode,
+ const unsigned long *nmask, unsigned long maxnode,
+ unsigned flags);
+
+ mbind() installs the policy specified by (mode, nmask, maxnodes) as
+ a VMA policy for the range of the calling task's address space
+ specified by the 'start' and 'len' arguments. Additional actions
+ may be requested via the 'flags' argument.
+
+ See the mbind(2) man page for more details.
+
+MEMORY POLICY COMMAND LINE INTERFACE
+
+Although not strictly part of the Linux implementation of memory policy,
+a command line tool, numactl(8), exists that allows one to:
+
++ set the task policy for a specified program via set_mempolicy(2), fork(2) and
+ exec(2)
+
++ set the shared policy for a shared memory segment via mbind(2)
+
+The numactl(8) tool is packages with the run-time version of the library
+containing the memory policy system call wrappers. Some distributions
+package the headers and compile-time libraries in a separate development
+package.
+
+
+MEMORY POLICIES AND CPUSETS
+
+Memory policies work within cpusets as described above. For memory policies
+that require a node or set of nodes, the nodes are restricted to the set of
+nodes whose memories are allowed by the cpuset constraints. If the
+intersection of the set of nodes specified for the policy and the set of nodes
+allowed by the cpuset is the empty set, the policy is considered invalid and
+cannot be installed.
+
+The interaction of memory policies and cpusets can be problematic for a
+couple of reasons:
+
+1) the memory policy APIs take physical node id's as arguments. However, the
+ memory policy APIs do not provide a way to determine what nodes are valid
+ in the context where the application is running. An application MAY consult
+ the cpuset file system [directly or via an out of tree, and not generally
+ available, libcpuset API] to obtain this information, but then the
+ application must be aware that it is running in a cpuset and use what are
+ intended primarily as administrative APIs.
+
+ However, as long as the policy specifies at least one node that is valid
+ in the controlling cpuset, the policy can be used.
+
+2) when tasks in two cpusets share access to a memory region, such as shared
+ memory segments created by shmget() of mmap() with the MAP_ANONYMOUS and
+ MAP_SHARED flags, and any of the tasks install shared policy on the region,
+ only nodes whose memories are allowed in both cpusets may be used in the
+ policies. Again, obtaining this information requires "stepping outside"
+ the memory policy APIs, as well as knowing in what cpusets other task might
+ be attaching to the shared region, to use the cpuset information.
+ Furthermore, if the cpusets' allowed memory sets are disjoint, "local"
+ allocation is the only valid policy.
diff --git a/MAINTAINERS b/MAINTAINERS
index 371fe67a4eef..abe5fa7f9c33 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3452,7 +3452,7 @@ S: Maintained
TPM DEVICE DRIVER
P: Kylene Hall
-M: kjhall@us.ibm.com
+M: tpmdd-devel@lists.sourceforge.net
W: http://tpmdd.sourceforge.net
P: Marcel Selhorst
M: tpm@selhorst.net
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
index e061b63a0038..dfbe7ab9ffe2 100644
--- a/arch/h8300/kernel/process.c
+++ b/arch/h8300/kernel/process.c
@@ -37,6 +37,7 @@
#include <linux/a.out.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
+#include <linux/fs.h>
#include <asm/uaccess.h>
#include <asm/system.h>
diff --git a/arch/h8300/kernel/sys_h8300.c b/arch/h8300/kernel/sys_h8300.c
index de7688cfd573..ddc62727dc9f 100644
--- a/arch/h8300/kernel/sys_h8300.c
+++ b/arch/h8300/kernel/sys_h8300.c
@@ -18,6 +18,7 @@
#include <linux/mman.h>
#include <linux/file.h>
#include <linux/utsname.h>
+#include <linux/fs.h>
#include <asm/setup.h>
#include <asm/uaccess.h>
diff --git a/arch/i386/xen/xen-head.S b/arch/i386/xen/xen-head.S
index bc71f3bc4014..f8d6937db2ec 100644
--- a/arch/i386/xen/xen-head.S
+++ b/arch/i386/xen/xen-head.S
@@ -7,20 +7,20 @@
#include <asm/boot.h>
#include <xen/interface/elfnote.h>
- .section .init.text
+.pushsection .init.text
ENTRY(startup_xen)
movl %esi,xen_start_info
cld
movl $(init_thread_union+THREAD_SIZE),%esp
jmp xen_start_kernel
+.popsection
-.pushsection ".bss.page_aligned"
+.pushsection .bss.page_aligned
.align PAGE_SIZE_asm
ENTRY(hypercall_page)
.skip 0x1000
.popsection
- .section .text
ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS, .asciz "linux")
ELFNOTE(Xen, XEN_ELFNOTE_GUEST_VERSION, .asciz "2.6")
ELFNOTE(Xen, XEN_ELFNOTE_XEN_VERSION, .asciz "xen-3.0")
diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c
index 7e6d5fb75390..ed3a4caec620 100644
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -62,7 +62,6 @@ EXPORT_SYMBOL(m68k_num_memory);
int m68k_realnum_memory;
EXPORT_SYMBOL(m68k_realnum_memory);
unsigned long m68k_memoffset;
-EXPORT_SYMBOL(m68k_memoffset);
struct mem_info m68k_memory[NUM_MEMINFO];
EXPORT_SYMBOL(m68k_memory);
@@ -200,7 +199,6 @@ static void __init m68k_parse_bootinfo(const struct bi_record *record)
(m68k_num_memory - 1));
m68k_num_memory = 1;
}
- m68k_memoffset = m68k_memory[0].addr-PAGE_OFFSET;
#endif
}
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index c42245775a4d..59fe285865ec 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -19,6 +19,8 @@ SECTIONS
*(.gnu.warning)
} :text = 0x4e75
+ _etext = .; /* End of text section */
+
. = ALIGN(16); /* Exception table */
__start___ex_table = .;
__ex_table : { *(__ex_table) }
@@ -26,8 +28,6 @@ SECTIONS
RODATA
- _etext = .; /* End of text section */
-
.data : { /* Data */
DATA_DATA
CONSTRUCTORS
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index 7d571a2b44dd..30d34f285024 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -210,11 +210,7 @@ void __init paging_init(void)
int i;
#ifdef DEBUG
- {
- extern unsigned long availmem;
- printk ("start of paging_init (%p, %lx)\n",
- kernel_pg_dir, availmem);
- }
+ printk ("start of paging_init (%p, %lx)\n", kernel_pg_dir, availmem);
#endif
/* Fix the cache mode in the page descriptors for the 680[46]0. */
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 846f97534685..47502d5ec19f 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -28,6 +28,7 @@
#include <linux/a.out.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
+#include <linux/fs.h>
#include <asm/uaccess.h>
#include <asm/system.h>
diff --git a/arch/m68knommu/kernel/sys_m68k.c b/arch/m68knommu/kernel/sys_m68k.c
index 48e6b33e8b44..15d62c5279a9 100644
--- a/arch/m68knommu/kernel/sys_m68k.c
+++ b/arch/m68knommu/kernel/sys_m68k.c
@@ -18,6 +18,7 @@
#include <linux/mman.h>
#include <linux/file.h>
#include <linux/utsname.h>
+#include <linux/fs.h>
#include <asm/setup.h>
#include <asm/uaccess.h>
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index aff661fe2ee1..0eabe73c964d 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -612,6 +612,8 @@ static int ubd_open_dev(struct ubd *ubd_dev)
ubd_dev->fd = fd;
if(ubd_dev->cow.file != NULL){
+ blk_queue_max_sectors(ubd_dev->queue, 8 * sizeof(long));
+
err = -ENOMEM;
ubd_dev->cow.bitmap = (void *) vmalloc(ubd_dev->cow.bitmap_len);
if(ubd_dev->cow.bitmap == NULL){
@@ -712,8 +714,6 @@ static int ubd_add(int n, char **error_out)
ubd_dev->queue->queuedata = ubd_dev;
blk_queue_max_hw_segments(ubd_dev->queue, MAX_SG);
- if(ubd_dev->cow.file != NULL)
- blk_queue_max_sectors(ubd_dev->queue, 8 * sizeof(long));
err = ubd_disk_register(MAJOR_NR, ubd_dev->size, n, &ubd_gendisk[n]);
if(err){
*error_out = "Failed to register device";
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 430673be1df7..7225124d96c2 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -587,7 +587,7 @@ static int it821x_port_start(struct ata_port *ap)
itdev->want[1][1] = ATA_ANY;
itdev->last_device = -1;
- if (pdev->revision == 0x11) {
+ if (pdev->revision == 0x10) {
itdev->timing10 = 1;
/* Need to disable ATAPI DMA for this case */
if (!itdev->smart)
diff --git a/drivers/auxdisplay/cfag12864b.c b/drivers/auxdisplay/cfag12864b.c
index cb44cb4f6a47..80bb06105387 100644
--- a/drivers/auxdisplay/cfag12864b.c
+++ b/drivers/auxdisplay/cfag12864b.c
@@ -355,7 +355,7 @@ static int __init cfag12864b_init(void)
cfag12864b_cache = kmalloc(sizeof(unsigned char) *
CFAG12864B_SIZE, GFP_KERNEL);
- if (cfag12864b_buffer == NULL) {
+ if (cfag12864b_cache == NULL) {
printk(KERN_ERR CFAG12864B_NAME ": ERROR: "
"can't alloc cache buffer (%i bytes)\n",
CFAG12864B_SIZE);
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index ef32e977d307..4245b7f80a49 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -68,6 +68,7 @@ config AMIGA_Z2RAM
config BLK_DEV_XD
tristate "XT hard disk support"
depends on ISA && ISA_DMA_API
+ select CHECK_SIGNATURE
help
Very old 8 bit hard disk controllers used in the IBM XT computer
will be supported if you say Y here.
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 96d2f9ee42d6..9b07f7851061 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2292,7 +2292,7 @@ static int __devinit ipmi_of_probe(struct of_device *dev,
info->irq = irq_of_parse_and_map(dev->node, 0);
info->dev = &dev->dev;
- dev_dbg(&dev->dev, "addr 0x%lx regsize %ld spacing %ld irq %x\n",
+ dev_dbg(&dev->dev, "addr 0x%lx regsize %d spacing %d irq %x\n",
info->io.addr_data, info->io.regsize, info->io.regspacing,
info->irq);
diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index 2ce0af1bd588..d95f316afb5a 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -1022,10 +1022,6 @@ static const unsigned short x86_keycodes[256] =
308,310,313,314,315,317,318,319,320,357,322,323,324,325,276,330,
332,340,365,342,343,344,345,346,356,270,341,368,369,370,371,372 };
-#ifdef CONFIG_MAC_EMUMOUSEBTN
-extern int mac_hid_mouse_emulate_buttons(int, int, int);
-#endif /* CONFIG_MAC_EMUMOUSEBTN */
-
#ifdef CONFIG_SPARC
static int sparc_l1_a_state = 0;
extern void sun_do_break(void);
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index bbb7f1292665..2f97d2f8f916 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -1565,6 +1565,9 @@ static int hdlcdev_open(struct net_device *dev)
int rc;
unsigned long flags;
+ if (!try_module_get(THIS_MODULE))
+ return -EBUSY;
+
DBGINFO(("%s hdlcdev_open\n", dev->name));
/* generic HDLC layer open processing */
@@ -1634,6 +1637,7 @@ static int hdlcdev_close(struct net_device *dev)
info->netcount=0;
spin_unlock_irqrestore(&info->netlock, flags);
+ module_put(THIS_MODULE);
return 0;
}
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index 9bb542913b86..39564b76d4a3 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -7,7 +7,7 @@
* Reiner Sailer <sailer@watson.ibm.com>
* Kylene Hall <kjhall@us.ibm.com>
*
- * Maintained by: <tpmdd_devel@lists.sourceforge.net>
+ * Maintained by: <tpmdd-devel@lists.sourceforge.net>
*
* Device driver for TCG/TCPA TPM (trusted platform module).
* Specifications at www.trustedcomputinggroup.org
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index b2e2b002a1bb..d15ccddc92eb 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -7,7 +7,7 @@
* Reiner Sailer <sailer@watson.ibm.com>
* Kylene Hall <kjhall@us.ibm.com>
*
- * Maintained by: <tpmdd_devel@lists.sourceforge.net>
+ * Maintained by: <tpmdd-devel@lists.sourceforge.net>
*
* Device driver for TCG/TCPA TPM (trusted platform module).
* Specifications at www.trustedcomputinggroup.org
diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c
index 1ab0896070be..d0e7926eb486 100644
--- a/drivers/char/tpm/tpm_atmel.c
+++ b/drivers/char/tpm/tpm_atmel.c
@@ -7,7 +7,7 @@
* Reiner Sailer <sailer@watson.ibm.com>
* Kylene Hall <kjhall@us.ibm.com>
*
- * Maintained by: <tpmdd_devel@lists.sourceforge.net>
+ * Maintained by: <tpmdd-devel@lists.sourceforge.net>
*
* Device driver for TCG/TCPA TPM (trusted platform module).
* Specifications at www.trustedcomputinggroup.org
diff --git a/drivers/char/tpm/tpm_atmel.h b/drivers/char/tpm/tpm_atmel.h
index 9363bcf0a402..6c831f9466b7 100644
--- a/drivers/char/tpm/tpm_atmel.h
+++ b/drivers/char/tpm/tpm_atmel.h
@@ -4,7 +4,7 @@
* Authors:
* Kylene Hall <kjhall@us.ibm.com>
*
- * Maintained by: <tpmdd_devel@lists.sourceforge.net>
+ * Maintained by: <tpmdd-devel@lists.sourceforge.net>
*
* Device driver for TCG/TCPA TPM (trusted platform module).
* Specifications at www.trustedcomputinggroup.org
diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c
index 8677fc6a545e..60a2d2630e36 100644
--- a/drivers/char/tpm/tpm_bios.c
+++ b/drivers/char/tpm/tpm_bios.c
@@ -7,6 +7,8 @@
* Reiner Sailer <sailer@watson.ibm.com>
* Kylene Hall <kjhall@us.ibm.com>
*
+ * Maintained by: <tpmdd-devel@lists.sourceforge.net>
+ *
* Access to the eventlog extended by the TCG BIOS of PC platform
*
* This program is free software; you can redistribute it and/or
diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c
index 608f73071bef..6313326bc41f 100644
--- a/drivers/char/tpm/tpm_nsc.c
+++ b/drivers/char/tpm/tpm_nsc.c
@@ -7,7 +7,7 @@
* Reiner Sailer <sailer@watson.ibm.com>
* Kylene Hall <kjhall@us.ibm.com>
*
- * Maintained by: <tpmdd_devel@lists.sourceforge.net>
+ * Maintained by: <tpmdd-devel@lists.sourceforge.net>
*
* Device driver for TCG/TCPA TPM (trusted platform module).
* Specifications at www.trustedcomputinggroup.org
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 483f3f60013c..23fa18a6654c 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -5,6 +5,8 @@
* Leendert van Doorn <leendert@watson.ibm.com>
* Kylene Hall <kjhall@us.ibm.com>
*
+ * Maintained by: <tpmdd-devel@lists.sourceforge.net>
+ *
* Device driver for TCG/TCPA TPM (trusted platform module).
* Specifications at www.trustedcomputinggroup.org
*
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 9b26574f1466..d602b8fa7d46 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -68,6 +68,7 @@ config INPUT_WISTRON_BTNS
select INPUT_POLLDEV
select NEW_LEDS
select LEDS_CLASS
+ select CHECK_SIGNATURE
help
Say Y here for support of Winstron laptop button interface, used on
laptops of various brands, including Acer and Fujitsu-Siemens. If
diff --git a/drivers/lguest/Kconfig b/drivers/lguest/Kconfig
index fd6925f41647..41e2250613a1 100644
--- a/drivers/lguest/Kconfig
+++ b/drivers/lguest/Kconfig
@@ -1,6 +1,6 @@
config LGUEST
tristate "Linux hypervisor example code"
- depends on X86 && PARAVIRT && EXPERIMENTAL && !X86_PAE
+ depends on X86 && PARAVIRT && EXPERIMENTAL && !X86_PAE && FUTEX
select LGUEST_GUEST
select HVC_DRIVER
---help---
diff --git a/drivers/macintosh/mac_hid.c b/drivers/macintosh/mac_hid.c
index 76c1e8e4a487..33dee3a773ed 100644
--- a/drivers/macintosh/mac_hid.c
+++ b/drivers/macintosh/mac_hid.c
@@ -13,6 +13,7 @@
#include <linux/sysctl.h>
#include <linux/input.h>
#include <linux/module.h>
+#include <linux/kbd_kern.h>
static struct input_dev *emumousebtn;
diff --git a/drivers/macintosh/via-pmu68k.c b/drivers/macintosh/via-pmu68k.c
index dfdf11c1eec4..e2f84da09e7c 100644
--- a/drivers/macintosh/via-pmu68k.c
+++ b/drivers/macintosh/via-pmu68k.c
@@ -818,243 +818,3 @@ pmu_present(void)
{
return (pmu_kind != PMU_UNKNOWN);
}
-
-#if 0 /* needs some work for 68K */
-
-/*
- * This struct is used to store config register values for
- * PCI devices which may get powered off when we sleep.
- */
-static struct pci_save {
- u16 command;
- u16 cache_lat;
- u16 intr;
-} *pbook_pci_saves;
-static int n_pbook_pci_saves;
-
-static inline void
-pbook_pci_save(void)
-{
- int npci;
- struct pci_dev *pd = NULL;
- struct pci_save *ps;
-
- npci = 0;
- while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL)
- ++npci;
- n_pbook_pci_saves = npci;
- if (npci == 0)
- return;
- ps = kmalloc(npci * sizeof(*ps), GFP_KERNEL);
- pbook_pci_saves = ps;
- if (ps == NULL)
- return;
-
- pd = NULL;
- while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) {
- pci_read_config_word(pd, PCI_COMMAND, &ps->command);
- pci_read_config_word(pd, PCI_CACHE_LINE_SIZE, &ps->cache_lat);
- pci_read_config_word(pd, PCI_INTERRUPT_LINE, &ps->intr);
- ++ps;
- --npci;
- }
-}
-
-static inline void
-pbook_pci_restore(void)
-{
- u16 cmd;
- struct pci_save *ps = pbook_pci_saves;
- struct pci_dev *pd = NULL;
- int j;
-
- while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) {
- if (ps->command == 0)
- continue;
- pci_read_config_word(pd, PCI_COMMAND, &cmd);
- if ((ps->command & ~cmd) == 0)
- continue;
- switch (pd->hdr_type) {
- case PCI_HEADER_TYPE_NORMAL:
- for (j = 0; j < 6; ++j)
- pci_write_config_dword(pd,
- PCI_BASE_ADDRESS_0 + j*4,
- pd->resource[j].start);
- pci_write_config_dword(pd, PCI_ROM_ADDRESS,
- pd->resource[PCI_ROM_RESOURCE].start);
- pci_write_config_word(pd, PCI_CACHE_LINE_SIZE,
- ps->cache_lat);
- pci_write_config_word(pd, PCI_INTERRUPT_LINE,
- ps->intr);
- pci_write_config_word(pd, PCI_COMMAND, ps->command);
- break;
- /* other header types not restored at present */
- }
- }
-}
-
-/*
- * Put the powerbook to sleep.
- */
-#define IRQ_ENABLE ((unsigned int *)0xf3000024)
-#define MEM_CTRL ((unsigned int *)0xf8000070)
-
-int powerbook_sleep(void)
-{
- int ret, i, x;
- static int save_backlight;
- static unsigned int save_irqen;
- unsigned long msr;
- unsigned int hid0;
- unsigned long p, wait;
- struct adb_request sleep_req;
-
- /* Notify device drivers */
- ret = blocking_notifier_call_chain(&sleep_notifier_list,
- PBOOK_SLEEP, NULL);
- if (ret & NOTIFY_STOP_MASK)
- return -EBUSY;
-
- /* Sync the disks. */
- /* XXX It would be nice to have some way to ensure that
- * nobody is dirtying any new buffers while we wait. */
- sys_sync();
-
- /* Turn off the display backlight */
- save_backlight = backlight_enabled;
- if (save_backlight)
- pmu_enable_backlight(0);
-
- /* Give the disks a little time to actually finish writing */
- for (wait = jiffies + (HZ/4); time_before(jiffies, wait); )
- mb();
-
- /* Disable all interrupts except pmu */
- save_irqen = in_le32(IRQ_ENABLE);
- for (i = 0; i < 32; ++i)
- if (i != vias->intrs[0].line && (save_irqen & (1 << i)))
- disable_irq(i);
- asm volatile("mtdec %0" : : "r" (0x7fffffff));
-
- /* Save the state of PCI config space for some slots */
- pbook_pci_save();
-
- /* Set the memory controller to keep the memory refreshed
- while we're asleep */
- for (i = 0x403f; i >= 0x4000; --i) {
- out_be32(MEM_CTRL, i);
- do {
- x = (in_be32(MEM_CTRL) >> 16) & 0x3ff;
- } while (x == 0);
- if (x >= 0x100)
- break;
- }
-
- /* Ask the PMU to put us to sleep */
- pmu_request(&sleep_req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
- while (!sleep_req.complete)
- mb();
- /* displacement-flush the L2 cache - necessary? */
- for (p = KERNELBASE; p < KERNELBASE + 0x100000; p += 0x1000)
- i = *(volatile int *)p;
- asleep = 1;
-
- /* Put the CPU into sleep mode */
- asm volatile("mfspr %0,1008" : "=r" (hid0) :);
- hid0 = (hid0 & ~(HID0_NAP | HID0_DOZE)) | HID0_SLEEP;
- asm volatile("mtspr 1008,%0" : : "r" (hid0));
- local_save_flags(msr);
- msr |= MSR_POW | MSR_EE;
- local_irq_restore(msr);
- udelay(10);
-
- /* OK, we're awake again, start restoring things */
- out_be32(MEM_CTRL, 0x3f);
- pbook_pci_restore();
-
- /* wait for the PMU interrupt sequence to complete */
- while (asleep)
- mb();
-
- /* reenable interrupts */
- for (i = 0; i < 32; ++i)
- if (i != vias->intrs[0].line && (save_irqen & (1 << i)))
- enable_irq(i);
-
- /* Notify drivers */
- blocking_notifier_call_chain(&sleep_notifier_list, PBOOK_WAKE, NULL);
-
- /* reenable ADB autopoll */
- pmu_adb_autopoll(adb_dev_map);
-
- /* Turn on the screen backlight, if it was on before */
- if (save_backlight)
- pmu_enable_backlight(1);
-
- /* Wait for the hard disk to spin up */
-
- return 0;
-}
-
-/*
- * Support for /dev/pmu device
- */
-static int pmu_open(struct inode *inode, struct file *file)
-{
- return 0;
-}
-
-static ssize_t pmu_read(struct file *file, char *buf,
- size_t count, loff_t *ppos)
-{
- return 0;
-}
-
-static ssize_t pmu_write(struct file *file, const char *buf,
- size_t count, loff_t *ppos)
-{
- return 0;
-}
-
-static int pmu_ioctl(struct inode * inode, struct file *filp,
- u_int cmd, u_long arg)
-{
- int error;
- __u32 value;
-
- switch (cmd) {
- case PMU_IOC_SLEEP:
- return -ENOSYS;
- case PMU_IOC_GET_BACKLIGHT:
- return put_user(backlight_level, (__u32 *)arg);
- case PMU_IOC_SET_BACKLIGHT:
- error = get_user(value, (__u32 *)arg);
- if (!error)
- pmu_set_brightness(value);
- return error;
- case PMU_IOC_GET_MODEL:
- return put_user(pmu_kind, (__u32 *)arg);
- }
- return -EINVAL;
-}
-
-static const struct file_operations pmu_device_fops = {
- .read = pmu_read,
- .write = pmu_write,
- .ioctl = pmu_ioctl,
- .open = pmu_open,
-};
-
-static struct miscdevice pmu_device = {
- PMU_MINOR, "pmu", &pmu_device_fops
-};
-
-void pmu_device_init(void)
-{
- if (!via)
- return;
- if (misc_register(&pmu_device) < 0)
- printk(KERN_ERR "via-pmu68k: cannot register misc device.\n");
-}
-#endif /* CONFIG_PMAC_PBOOK */
-
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 650991bddd8e..f33a729960ca 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1972,7 +1972,8 @@ static int run(mddev_t *mddev)
!test_bit(In_sync, &disk->rdev->flags)) {
disk->head_position = 0;
mddev->degraded++;
- conf->fullsync = 1;
+ if (disk->rdev)
+ conf->fullsync = 1;
}
}
if (mddev->degraded == conf->raid_disks) {
@@ -2153,11 +2154,25 @@ static int raid1_reshape(mddev_t *mddev)
oldpool = conf->r1bio_pool;
conf->r1bio_pool = newpool;
- for (d=d2=0; d < conf->raid_disks; d++)
- if (conf->mirrors[d].rdev) {
- conf->mirrors[d].rdev->raid_disk = d2;
- newmirrors[d2++].rdev = conf->mirrors[d].rdev;
+ for (d = d2 = 0; d < conf->raid_disks; d++) {
+ mdk_rdev_t *rdev = conf->mirrors[d].rdev;
+ if (rdev && rdev->raid_disk != d2) {
+ char nm[20];
+ sprintf(nm, "rd%d", rdev->raid_disk);
+ sysfs_remove_link(&mddev->kobj, nm);
+ rdev->raid_disk = d2;
+ sprintf(nm, "rd%d", rdev->raid_disk);
+ sysfs_remove_link(&mddev->kobj, nm);
+ if (sysfs_create_link(&mddev->kobj,
+ &rdev->kobj, nm))
+ printk(KERN_WARNING
+ "md/raid1: cannot register "
+ "%s for %s\n",
+ nm, mdname(mddev));
}
+ if (rdev)
+ newmirrors[d2++].rdev = rdev;
+ }
kfree(conf->mirrors);
conf->mirrors = newmirrors;
kfree(conf->poolinfo);
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index 80c4a8463065..1cb33cac1237 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -892,7 +892,7 @@ static int m41t80_remove(struct i2c_client *client)
static struct i2c_driver m41t80_driver = {
.driver = {
- .name = "m41t80",
+ .name = "rtc-m41t80",
},
.probe = m41t80_probe,
.remove = m41t80_remove,
diff --git a/drivers/rtc/rtc-max6902.c b/drivers/rtc/rtc-max6902.c
index d94170728075..3e183cfee10f 100644
--- a/drivers/rtc/rtc-max6902.c
+++ b/drivers/rtc/rtc-max6902.c
@@ -13,7 +13,7 @@
*
* 24-May-2006: Raphael Assenat <raph@8d.com>
* - Major rework
- * Converted to rtc_device and uses the SPI layer.
+ * Converted to rtc_device and uses the SPI layer.
*
* ??-???-2005: Someone at Compulab
* - Initial driver creation.
@@ -259,11 +259,11 @@ static int __devexit max6902_remove(struct spi_device *spi)
static struct spi_driver max6902_driver = {
.driver = {
- .name = "max6902",
+ .name = "rtc-max6902",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
},
- .probe = max6902_probe,
+ .probe = max6902_probe,
.remove = __devexit_p(max6902_remove),
};
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index d2b3898b750a..6f2c71ef47ee 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -367,6 +367,7 @@ config SCSI_3W_9XXX
config SCSI_7000FASST
tristate "7000FASST SCSI support"
depends on ISA && SCSI && ISA_DMA_API
+ select CHECK_SIGNATURE
help
This driver supports the Western Digital 7000 SCSI host adapter
family. Some information is in the source:
@@ -388,6 +389,7 @@ config SCSI_AHA152X
tristate "Adaptec AHA152X/2825 support"
depends on ISA && SCSI && !64BIT
select SCSI_SPI_ATTRS
+ select CHECK_SIGNATURE
---help---
This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
@@ -583,6 +585,7 @@ config SCSI_DTC3280
tristate "DTC3180/3280 SCSI support"
depends on ISA && SCSI
select SCSI_SPI_ATTRS
+ select CHECK_SIGNATURE
help
This is support for DTC 3180/3280 SCSI Host Adapters. Please read
the SCSI-HOWTO, available from
@@ -657,6 +660,7 @@ config SCSI_EATA_PIO
config SCSI_FUTURE_DOMAIN
tristate "Future Domain 16xx SCSI/AHA-2920A support"
depends on (ISA || PCI) && SCSI
+ select CHECK_SIGNATURE
---help---
This is support for Future Domain's 16-bit SCSI host adapters
(TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and
@@ -1324,6 +1328,7 @@ config SCSI_LPFC
config SCSI_SEAGATE
tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
depends on X86 && ISA && SCSI
+ select CHECK_SIGNATURE
---help---
These are 8-bit SCSI controllers; the ST-01 is also supported by
this driver. It is explained in section 3.9 of the SCSI-HOWTO,
@@ -1397,6 +1402,7 @@ config SCSI_T128
tristate "Trantor T128/T128F/T228 SCSI support"
depends on ISA && SCSI
select SCSI_SPI_ATTRS
+ select CHECK_SIGNATURE
---help---
This is support for a SCSI host adapter. It is explained in section
3.11 of the SCSI-HOWTO, available from
@@ -1561,7 +1567,7 @@ config A3000_SCSI
built-in SCSI controller, say Y. Otherwise, say N.
To compile this driver as a module, choose M here: the
- module will be called wd33c93.
+ module will be called a3000.
config A2091_SCSI
tristate "A2091/A590 WD33C93A support"
@@ -1571,7 +1577,7 @@ config A2091_SCSI
say N.
To compile this driver as a module, choose M here: the
- module will be called wd33c93.
+ module will be called a2091.
config GVP11_SCSI
tristate "GVP Series II WD33C93A support"
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 301313002f6b..f94109cbb46e 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -129,7 +129,16 @@ struct uart_8250_port {
unsigned char mcr;
unsigned char mcr_mask; /* mask of user bits */
unsigned char mcr_force; /* mask of forced bits */
- unsigned char lsr_break_flag;
+
+ /*
+ * Some bits in registers are cleared on a read, so they must
+ * be saved whenever the register is read but the bits will not
+ * be immediately processed.
+ */
+#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
+ unsigned char lsr_saved_flags;
+#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
+ unsigned char msr_saved_flags;
/*
* We provide a per-port pm hook.
@@ -1238,6 +1247,7 @@ static void serial8250_start_tx(struct uart_port *port)
if (up->bugs & UART_BUG_TXEN) {
unsigned char lsr, iir;
lsr = serial_in(up, UART_LSR);
+ up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
iir = serial_in(up, UART_IIR) & 0x0f;
if ((up->port.type == PORT_RM9000) ?
(lsr & UART_LSR_THRE &&
@@ -1290,18 +1300,10 @@ receive_chars(struct uart_8250_port *up, unsigned int *status)
flag = TTY_NORMAL;
up->port.icount.rx++;
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- /*
- * Recover the break flag from console xmit
- */
- if (up->port.line == up->port.cons->index) {
- lsr |= up->lsr_break_flag;
- up->lsr_break_flag = 0;
- }
-#endif
+ lsr |= up->lsr_saved_flags;
+ up->lsr_saved_flags = 0;
- if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE |
- UART_LSR_FE | UART_LSR_OE))) {
+ if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
/*
* For statistics only
*/
@@ -1392,6 +1394,8 @@ static unsigned int check_modem_status(struct uart_8250_port *up)
{
unsigned int status = serial_in(up, UART_MSR);
+ status |= up->msr_saved_flags;
+ up->msr_saved_flags = 0;
if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
up->port.info != NULL) {
if (status & UART_MSR_TERI)
@@ -1591,7 +1595,8 @@ static void serial8250_timeout(unsigned long data)
static void serial8250_backup_timeout(unsigned long data)
{
struct uart_8250_port *up = (struct uart_8250_port *)data;
- unsigned int iir, ier = 0;
+ unsigned int iir, ier = 0, lsr;
+ unsigned long flags;
/*
* Must disable interrupts or else we risk racing with the interrupt
@@ -1610,9 +1615,13 @@ static void serial8250_backup_timeout(unsigned long data)
* the "Diva" UART used on the management processor on many HP
* ia64 and parisc boxes.
*/
+ spin_lock_irqsave(&up->port.lock, flags);
+ lsr = serial_in(up, UART_LSR);
+ up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+ spin_unlock_irqrestore(&up->port.lock, flags);
if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
(!uart_circ_empty(&up->port.info->xmit) || up->port.x_char) &&
- (serial_in(up, UART_LSR) & UART_LSR_THRE)) {
+ (lsr & UART_LSR_THRE)) {
iir &= ~(UART_IIR_ID | UART_IIR_NO_INT);
iir |= UART_IIR_THRI;
}
@@ -1631,13 +1640,14 @@ static unsigned int serial8250_tx_empty(struct uart_port *port)
{
struct uart_8250_port *up = (struct uart_8250_port *)port;
unsigned long flags;
- unsigned int ret;
+ unsigned int lsr;
spin_lock_irqsave(&up->port.lock, flags);
- ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+ lsr = serial_in(up, UART_LSR);
+ up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
spin_unlock_irqrestore(&up->port.lock, flags);
- return ret;
+ return lsr & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
}
static unsigned int serial8250_get_mctrl(struct uart_port *port)
@@ -1708,8 +1718,7 @@ static inline void wait_for_xmitr(struct uart_8250_port *up, int bits)
do {
status = serial_in(up, UART_LSR);
- if (status & UART_LSR_BI)
- up->lsr_break_flag = UART_LSR_BI;
+ up->lsr_saved_flags |= status & LSR_SAVE_FLAGS;
if (--tmout == 0)
break;
@@ -1718,8 +1727,12 @@ static inline void wait_for_xmitr(struct uart_8250_port *up, int bits)
/* Wait up to 1s for flow control if necessary */
if (up->port.flags & UPF_CONS_FLOW) {
- tmout = 1000000;
- while (!(serial_in(up, UART_MSR) & UART_MSR_CTS) && --tmout) {
+ unsigned int tmout;
+ for (tmout = 1000000; tmout; tmout--) {
+ unsigned int msr = serial_in(up, UART_MSR);
+ up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;
+ if (msr & UART_MSR_CTS)
+ break;
udelay(1);
touch_nmi_watchdog();
}
@@ -1889,6 +1902,18 @@ static int serial8250_startup(struct uart_port *port)
spin_unlock_irqrestore(&up->port.lock, flags);
/*
+ * Clear the interrupt registers again for luck, and clear the
+ * saved flags to avoid getting false values from polling
+ * routines or the previous session.
+ */
+ serial_inp(up, UART_LSR);
+ serial_inp(up, UART_RX);
+ serial_inp(up, UART_IIR);
+ serial_inp(up, UART_MSR);
+ up->lsr_saved_flags = 0;
+ up->msr_saved_flags = 0;
+
+ /*
* Finally, enable interrupts. Note: Modem status interrupts
* are set via set_termios(), which will be occurring imminently
* anyway, so we don't enable them here.
@@ -1906,14 +1931,6 @@ static int serial8250_startup(struct uart_port *port)
(void) inb_p(icp);
}
- /*
- * And clear the interrupt registers again for luck.
- */
- (void) serial_inp(up, UART_LSR);
- (void) serial_inp(up, UART_RX);
- (void) serial_inp(up, UART_IIR);
- (void) serial_inp(up, UART_MSR);
-
return 0;
}
@@ -2484,6 +2501,16 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
wait_for_xmitr(up, BOTH_EMPTY);
serial_out(up, UART_IER, ier);
+ /*
+ * The receive handling will happen properly because the
+ * receive ready bit will still be set; it is not cleared
+ * on read. However, modem control will not, we must
+ * call it if we have saved something in the saved flags
+ * while processing with interrupts off.
+ */
+ if (up->msr_saved_flags)
+ check_modem_status(up);
+
if (locked)
spin_unlock(&up->port.lock);
local_irq_restore(flags);
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 5e485876f54c..bd66339f7a3f 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -580,6 +580,138 @@ static int pci_netmos_init(struct pci_dev *dev)
return num_serial;
}
+/*
+ * ITE support by Niels de Vos <niels.devos@wincor-nixdorf.com>
+ *
+ * These chips are available with optionally one parallel port and up to
+ * two serial ports. Unfortunately they all have the same product id.
+ *
+ * Basic configuration is done over a region of 32 I/O ports. The base
+ * ioport is called INTA or INTC, depending on docs/other drivers.
+ *
+ * The region of the 32 I/O ports is configured in POSIO0R...
+ */
+
+/* registers */
+#define ITE_887x_MISCR 0x9c
+#define ITE_887x_INTCBAR 0x78
+#define ITE_887x_UARTBAR 0x7c
+#define ITE_887x_PS0BAR 0x10
+#define ITE_887x_POSIO0 0x60
+
+/* I/O space size */
+#define ITE_887x_IOSIZE 32
+/* I/O space size (bits 26-24; 8 bytes = 011b) */
+#define ITE_887x_POSIO_IOSIZE_8 (3 << 24)
+/* I/O space size (bits 26-24; 32 bytes = 101b) */
+#define ITE_887x_POSIO_IOSIZE_32 (5 << 24)
+/* Decoding speed (1 = slow, 2 = medium, 3 = fast) */
+#define ITE_887x_POSIO_SPEED (3 << 29)
+/* enable IO_Space bit */
+#define ITE_887x_POSIO_ENABLE (1 << 31)
+
+static int __devinit pci_ite887x_init(struct pci_dev *dev)
+{
+ /* inta_addr are the configuration addresses of the ITE */
+ static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0,
+ 0x200, 0x280, 0 };
+ int ret, i, type;
+ struct resource *iobase = NULL;
+ u32 miscr, uartbar, ioport;
+
+ /* search for the base-ioport */
+ i = 0;
+ while (inta_addr[i] && iobase == NULL) {
+ iobase = request_region(inta_addr[i], ITE_887x_IOSIZE,
+ "ite887x");
+ if (iobase != NULL) {
+ /* write POSIO0R - speed | size | ioport */
+ pci_write_config_dword(dev, ITE_887x_POSIO0,
+ ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
+ ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]);
+ /* write INTCBAR - ioport */
+ pci_write_config_dword(dev, ITE_887x_INTCBAR, inta_addr[i]);
+ ret = inb(inta_addr[i]);
+ if (ret != 0xff) {
+ /* ioport connected */
+ break;
+ }
+ release_region(iobase->start, ITE_887x_IOSIZE);
+ iobase = NULL;
+ }
+ i++;
+ }
+
+ if (!inta_addr[i]) {
+ printk(KERN_ERR "ite887x: could not find iobase\n");
+ return -ENODEV;
+ }
+
+ /* start of undocumented type checking (see parport_pc.c) */
+ type = inb(iobase->start + 0x18) & 0x0f;
+
+ switch (type) {
+ case 0x2: /* ITE8871 (1P) */
+ case 0xa: /* ITE8875 (1P) */
+ ret = 0;
+ break;
+ case 0xe: /* ITE8872 (2S1P) */
+ ret = 2;
+ break;
+ case 0x6: /* ITE8873 (1S) */
+ ret = 1;
+ break;
+ case 0x8: /* ITE8874 (2S) */
+ ret = 2;
+ break;
+ default:
+ moan_device("Unknown ITE887x", dev);
+ ret = -ENODEV;
+ }
+
+ /* configure all serial ports */
+ for (i = 0; i < ret; i++) {
+ /* read the I/O port from the device */
+ pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)),
+ &ioport);
+ ioport &= 0x0000FF00; /* the actual base address */
+ pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)),
+ ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
+ ITE_887x_POSIO_IOSIZE_8 | ioport);
+
+ /* write the ioport to the UARTBAR */
+ pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar);
+ uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */
+ uartbar |= (ioport << (16 * i)); /* set the ioport */
+ pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar);
+
+ /* get current config */
+ pci_read_config_dword(dev, ITE_887x_MISCR, &miscr);
+ /* disable interrupts (UARTx_Routing[3:0]) */
+ miscr &= ~(0xf << (12 - 4 * i));
+ /* activate the UART (UARTx_En) */
+ miscr |= 1 << (23 - i);
+ /* write new config with activated UART */
+ pci_write_config_dword(dev, ITE_887x_MISCR, miscr);
+ }
+
+ if (ret <= 0) {
+ /* the device has no UARTs if we get here */
+ release_region(iobase->start, ITE_887x_IOSIZE);
+ }
+
+ return ret;
+}
+
+static void __devexit pci_ite887x_exit(struct pci_dev *dev)
+{
+ u32 ioport;
+ /* the ioport is bit 0-15 in POSIO0R */
+ pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport);
+ ioport &= 0xffff;
+ release_region(ioport, ITE_887x_IOSIZE);
+}
+
static int
pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
struct uart_port *port, int idx)
@@ -653,6 +785,18 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
.setup = pci_default_setup,
},
/*
+ * ITE
+ */
+ {
+ .vendor = PCI_VENDOR_ID_ITE,
+ .device = PCI_DEVICE_ID_ITE_8872,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ite887x_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_ite887x_exit),
+ },
+ /*
* Panacom
*/
{
@@ -933,6 +1077,7 @@ enum pci_board_num_t {
pbn_b1_2_1250000,
+ pbn_b1_bt_1_115200,
pbn_b1_bt_2_921600,
pbn_b1_1_1382400,
@@ -983,6 +1128,7 @@ enum pci_board_num_t {
pbn_exar_XR17C152,
pbn_exar_XR17C154,
pbn_exar_XR17C158,
+ pbn_pasemi_1682M,
};
/*
@@ -1211,6 +1357,13 @@ static struct pciserial_board pci_boards[] __devinitdata = {
.uart_offset = 8,
},
+ [pbn_b1_bt_1_115200] = {
+ .flags = FL_BASE1|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
[pbn_b1_bt_2_921600] = {
.flags = FL_BASE1|FL_BASE_BARS,
.num_ports = 2,
@@ -1498,6 +1651,18 @@ static struct pciserial_board pci_boards[] __devinitdata = {
.base_baud = 921600,
.uart_offset = 0x200,
},
+ /*
+ * PA Semi PWRficient PA6T-1682M on-chip UART
+ */
+ [pbn_pasemi_1682M] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 8333333,
+ },
+};
+
+static const struct pci_device_id softmodem_blacklist[] = {
+ { PCI_VDEVICE ( AL, 0x5457 ), }, /* ALi Corporation M5457 AC'97 Modem */
};
/*
@@ -1508,6 +1673,7 @@ static struct pciserial_board pci_boards[] __devinitdata = {
static int __devinit
serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
{
+ const struct pci_device_id *blacklist;
int num_iomem, num_port, first_port = -1, i;
/*
@@ -1522,6 +1688,18 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
(dev->class & 0xff) > 6)
return -ENODEV;
+ /*
+ * Do not access blacklisted devices that are known not to
+ * feature serial ports.
+ */
+ for (blacklist = softmodem_blacklist;
+ blacklist < softmodem_blacklist + ARRAY_SIZE(softmodem_blacklist);
+ blacklist++) {
+ if (dev->vendor == blacklist->vendor &&
+ dev->device == blacklist->device)
+ return -ENODEV;
+ }
+
num_iomem = num_port = 0;
for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
@@ -2364,6 +2542,13 @@ static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_115200 },
+ /*
+ * ITE
+ */
+ { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_b1_bt_1_115200 },
/*
* IntaShield IS-200
@@ -2382,6 +2567,13 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8,
0, 0, pbn_b2_8_921600 },
/*
+ * PA Semi PA6T-1682M on-chip UART
+ */
+ { PCI_VENDOR_ID_PASEMI, 0xa004,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pasemi_1682M },
+
+ /*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
*/
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 030a6063541d..a055f58f342f 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1146,11 +1146,14 @@ static void uart_set_termios(struct tty_struct *tty, struct ktermios *old_termio
/*
* These are the bits that are used to setup various
- * flags in the low level driver.
+ * flags in the low level driver. We can ignore the Bfoo
+ * bits in c_cflag; c_[io]speed will always be set
+ * appropriately by set_termios() in tty_ioctl.c
*/
#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
if ((cflag ^ old_termios->c_cflag) == 0 &&
+ tty->termios->c_ospeed == old_termios->c_ospeed &&
+ tty->termios->c_ispeed == old_termios->c_ispeed &&
RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0)
return;
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index b8f91e018b21..0930e2a85514 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -37,7 +37,7 @@
#include <asm/io.h>
-static char *serial_version = "1.09";
+static char *serial_version = "1.10";
static char *serial_name = "TX39/49 Serial driver";
#define PASS_LIMIT 256
@@ -436,8 +436,10 @@ static unsigned int serial_txx9_get_mctrl(struct uart_port *port)
struct uart_txx9_port *up = (struct uart_txx9_port *)port;
unsigned int ret;
- ret = ((sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS)
- | ((sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS);
+ /* no modem control lines */
+ ret = TIOCM_CAR | TIOCM_DSR;
+ ret |= (sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS;
+ ret |= (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS;
return ret;
}
@@ -557,6 +559,12 @@ serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios,
unsigned long flags;
unsigned int baud, quot;
+ /*
+ * We don't support modem control lines.
+ */
+ termios->c_cflag &= ~(HUPCL | CMSPAR);
+ termios->c_cflag |= CLOCAL;
+
cval = sio_in(up, TXX9_SILCR);
/* byte size and parity */
cval &= ~TXX9_SILCR_UMODE_MASK;
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index 80a81eccad36..832e4613673a 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -115,6 +115,52 @@ static int nocursor = 0;
module_param(nocursor, int, 0644);
MODULE_PARM_DESC(nocursor, "cursor enable/disable");
+/* fb_blank
+ * Blank the screen. Depending on the mode, the screen will be
+ * activated with the backlight color, or desactivated
+ */
+static int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
+{
+ struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+
+ print_dbg("fb_blank %d %p", blank_mode, fbi);
+
+ switch (blank_mode) {
+
+ case VESA_NO_BLANKING:
+ /* Turn on panel */
+ fbdev->regs->lcd_control |= LCD_CONTROL_GO;
+#ifdef CONFIG_MIPS_PB1100
+ if (drv_info.panel_idx == 1) {
+ au_writew(au_readw(PB1100_G_CONTROL)
+ | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
+ PB1100_G_CONTROL);
+ }
+#endif
+ au_sync();
+ break;
+
+ case VESA_VSYNC_SUSPEND:
+ case VESA_HSYNC_SUSPEND:
+ case VESA_POWERDOWN:
+ /* Turn off panel */
+ fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
+#ifdef CONFIG_MIPS_PB1100
+ if (drv_info.panel_idx == 1) {
+ au_writew(au_readw(PB1100_G_CONTROL)
+ & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
+ PB1100_G_CONTROL);
+ }
+#endif
+ au_sync();
+ break;
+ default:
+ break;
+
+ }
+ return 0;
+}
+
/*
* Set hardware with var settings. This will enable the controller with a specific
* mode, normally validated with the fb_check_var method
@@ -272,52 +318,6 @@ int au1100fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned
return 0;
}
-/* fb_blank
- * Blank the screen. Depending on the mode, the screen will be
- * activated with the backlight color, or desactivated
- */
-int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
-{
- struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
-
- print_dbg("fb_blank %d %p", blank_mode, fbi);
-
- switch (blank_mode) {
-
- case VESA_NO_BLANKING:
- /* Turn on panel */
- fbdev->regs->lcd_control |= LCD_CONTROL_GO;
-#ifdef CONFIG_MIPS_PB1100
- if (drv_info.panel_idx == 1) {
- au_writew(au_readw(PB1100_G_CONTROL)
- | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
- PB1100_G_CONTROL);
- }
-#endif
- au_sync();
- break;
-
- case VESA_VSYNC_SUSPEND:
- case VESA_HSYNC_SUSPEND:
- case VESA_POWERDOWN:
- /* Turn off panel */
- fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
-#ifdef CONFIG_MIPS_PB1100
- if (drv_info.panel_idx == 1) {
- au_writew(au_readw(PB1100_G_CONTROL)
- & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
- PB1100_G_CONTROL);
- }
-#endif
- au_sync();
- break;
- default:
- break;
-
- }
- return 0;
-}
-
/* fb_pan_display
* Pan display in x and/or y as specified
*/
diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c
index 7fa1afeae8dc..dda0586ab3f3 100644
--- a/drivers/video/console/newport_con.c
+++ b/drivers/video/console/newport_con.c
@@ -738,9 +738,8 @@ const struct consw newport_con = {
#ifdef MODULE
static int __init newport_console_init(void)
{
-
if (!sgi_gfxaddr)
- return NULL;
+ return 0;
if (!npregs)
npregs = (struct newport_regs *)/* ioremap cannot fail */
diff --git a/drivers/video/imsttfb.c b/drivers/video/imsttfb.c
index 5715b8ad0ddc..94f4511023d8 100644
--- a/drivers/video/imsttfb.c
+++ b/drivers/video/imsttfb.c
@@ -1391,7 +1391,7 @@ init_imstt(struct fb_info *info)
}
}
-#if USE_NV_MODES && defined(CONFIG_PPC)
+#if USE_NV_MODES && defined(CONFIG_PPC32)
{
int vmode = init_vmode, cmode = init_cmode;
diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c
index 2fbd8dd16df5..6840dfebe4d4 100644
--- a/drivers/w1/w1_int.c
+++ b/drivers/w1/w1_int.c
@@ -170,22 +170,24 @@ void __w1_remove_master_device(struct w1_master *dev)
void w1_remove_master_device(struct w1_bus_master *bm)
{
- struct w1_master *dev = NULL;
+ struct w1_master *dev, *found = NULL;
list_for_each_entry(dev, &w1_masters, w1_master_entry) {
if (!dev->initialized)
continue;
- if (dev->bus_master->data == bm->data)
+ if (dev->bus_master->data == bm->data) {
+ found = dev;
break;
+ }
}
- if (!dev) {
+ if (!found) {
printk(KERN_ERR "Device doesn't exist.\n");
return;
}
- __w1_remove_master_device(dev);
+ __w1_remove_master_device(found);
}
EXPORT_SYMBOL(w1_add_master_device);
diff --git a/drivers/zorro/zorro-sysfs.c b/drivers/zorro/zorro-sysfs.c
index 9130f1c12c26..808b4f8675c5 100644
--- a/drivers/zorro/zorro-sysfs.c
+++ b/drivers/zorro/zorro-sysfs.c
@@ -78,7 +78,7 @@ static ssize_t zorro_read_config(struct kobject *kobj,
static struct bin_attribute zorro_config_attr = {
.attr = {
.name = "config",
- .mode = S_IRUGO | S_IWUSR,
+ .mode = S_IRUGO,
},
.size = sizeof(struct ConfigDev),
.read = zorro_read_config,
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index 2d4c8a3e604e..45ff3d63b758 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -587,19 +587,20 @@ static struct dentry *autofs4_lookup(struct inode *dir, struct dentry *dentry, s
unhashed = autofs4_lookup_unhashed(sbi, dentry->d_parent, &dentry->d_name);
if (!unhashed) {
/*
- * Mark the dentry incomplete, but add it. This is needed so
- * that the VFS layer knows about the dentry, and we can count
- * on catching any lookups through the revalidate.
- *
- * Let all the hard work be done by the revalidate function that
- * needs to be able to do this anyway..
- *
- * We need to do this before we release the directory semaphore.
+ * Mark the dentry incomplete but don't hash it. We do this
+ * to serialize our inode creation operations (symlink and
+ * mkdir) which prevents deadlock during the callback to
+ * the daemon. Subsequent user space lookups for the same
+ * dentry are placed on the wait queue while the daemon
+ * itself is allowed passage unresticted so the create
+ * operation itself can then hash the dentry. Finally,
+ * we check for the hashed dentry and return the newly
+ * hashed dentry.
*/
dentry->d_op = &autofs4_root_dentry_operations;
dentry->d_fsdata = NULL;
- d_add(dentry, NULL);
+ d_instantiate(dentry, NULL);
} else {
struct autofs_info *ino = autofs4_dentry_ino(unhashed);
DPRINTK("rehash %p with %p", dentry, unhashed);
@@ -607,15 +608,17 @@ static struct dentry *autofs4_lookup(struct inode *dir, struct dentry *dentry, s
* If we are racing with expire the request might not
* be quite complete but the directory has been removed
* so it must have been successful, so just wait for it.
+ * We need to ensure the AUTOFS_INF_EXPIRING flag is clear
+ * before continuing as revalidate may fail when calling
+ * try_to_fill_dentry (returning EAGAIN) if we don't.
*/
- if (ino && (ino->flags & AUTOFS_INF_EXPIRING)) {
+ while (ino && (ino->flags & AUTOFS_INF_EXPIRING)) {
DPRINTK("wait for incomplete expire %p name=%.*s",
unhashed, unhashed->d_name.len,
unhashed->d_name.name);
autofs4_wait(sbi, unhashed, NFY_NONE);
DPRINTK("request completed");
}
- d_rehash(unhashed);
dentry = unhashed;
}
@@ -658,7 +661,7 @@ static struct dentry *autofs4_lookup(struct inode *dir, struct dentry *dentry, s
* for all system calls, but it should be OK for the operations
* we permit from an autofs.
*/
- if (dentry->d_inode && d_unhashed(dentry)) {
+ if (!oz_mode && d_unhashed(dentry)) {
/*
* A user space application can (and has done in the past)
* remove and re-create this directory during the callback.
@@ -716,7 +719,7 @@ static int autofs4_dir_symlink(struct inode *dir,
strcpy(cp, symname);
inode = autofs4_get_inode(dir->i_sb, ino);
- d_instantiate(dentry, inode);
+ d_add(dentry, inode);
if (dir == dir->i_sb->s_root->d_inode)
dentry->d_op = &autofs4_root_dentry_operations;
@@ -844,7 +847,7 @@ static int autofs4_dir_mkdir(struct inode *dir, struct dentry *dentry, int mode)
return -ENOSPC;
inode = autofs4_get_inode(dir->i_sb, ino);
- d_instantiate(dentry, inode);
+ d_add(dentry, inode);
if (dir == dir->i_sb->s_root->d_inode)
dentry->d_op = &autofs4_root_dentry_operations;
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 131954b3fb98..5d40ad13ab5c 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -357,6 +357,10 @@ static struct dentry *ecryptfs_lookup(struct inode *dir, struct dentry *dentry,
ecryptfs_printk(KERN_DEBUG, "Is a special file; returning\n");
goto out;
}
+ if (special_file(lower_inode->i_mode)) {
+ ecryptfs_printk(KERN_DEBUG, "Is a special file; returning\n");
+ goto out;
+ }
if (!nd) {
ecryptfs_printk(KERN_DEBUG, "We have a NULL nd, just leave"
"as we *think* we are about to unlink\n");
diff --git a/fs/exec.c b/fs/exec.c
index ce62f7b65f17..c21a8cc06277 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -780,18 +780,11 @@ static int de_thread(struct task_struct *tsk)
int count;
/*
- * Tell all the sighand listeners that this sighand has
- * been detached. The signalfd_detach() function grabs the
- * sighand lock, if signal listeners are present on the sighand.
- */
- signalfd_detach(tsk);
-
- /*
* If we don't share sighandlers, then we aren't sharing anything
* and we can just re-use it all.
*/
if (atomic_read(&oldsighand->count) <= 1) {
- BUG_ON(atomic_read(&sig->count) != 1);
+ signalfd_detach(tsk);
exit_itimers(sig);
return 0;
}
@@ -930,12 +923,11 @@ static int de_thread(struct task_struct *tsk)
sig->flags = 0;
no_thread_group:
+ signalfd_detach(tsk);
exit_itimers(sig);
if (leader)
release_task(leader);
- BUG_ON(atomic_read(&sig->count) != 1);
-
if (atomic_read(&oldsighand->count) == 1) {
/*
* Now that we nuked the rest of the thread group,
diff --git a/fs/signalfd.c b/fs/signalfd.c
index 7b941abbcde0..a8e293d30034 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -56,12 +56,18 @@ static int signalfd_lock(struct signalfd_ctx *ctx, struct signalfd_lockctx *lk)
sighand = lock_task_sighand(lk->tsk, &lk->flags);
rcu_read_unlock();
- if (sighand && !ctx->tsk) {
+ if (!sighand)
+ return 0;
+
+ if (!ctx->tsk) {
unlock_task_sighand(lk->tsk, &lk->flags);
- sighand = NULL;
+ return 0;
}
- return sighand != NULL;
+ if (lk->tsk->tgid == current->tgid)
+ lk->tsk = current;
+
+ return 1;
}
static void signalfd_unlock(struct signalfd_lockctx *lk)
@@ -331,7 +337,7 @@ asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemas
init_waitqueue_head(&ctx->wqh);
ctx->sigmask = sigmask;
- ctx->tsk = current;
+ ctx->tsk = current->group_leader;
sighand = current->sighand;
/*
diff --git a/include/asm-m68k/ioctls.h b/include/asm-m68k/ioctls.h
index 0c48929ab444..b8d2f4be7fd7 100644
--- a/include/asm-m68k/ioctls.h
+++ b/include/asm-m68k/ioctls.h
@@ -46,6 +46,10 @@
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
+#define TCGETS2 _IOR('T',0x2A, struct termios2)
+#define TCSETS2 _IOW('T',0x2B, struct termios2)
+#define TCSETSW2 _IOW('T',0x2C, struct termios2)
+#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
diff --git a/include/asm-m68k/page.h b/include/asm-m68k/page.h
index 9e6d0d6debdb..1431ea0b59e0 100644
--- a/include/asm-m68k/page.h
+++ b/include/asm-m68k/page.h
@@ -4,17 +4,15 @@
#ifdef __KERNEL__
+#include <linux/const.h>
+
/* PAGE_SHIFT determines the page size */
#ifndef CONFIG_SUN3
#define PAGE_SHIFT (12)
#else
#define PAGE_SHIFT (13)
#endif
-#ifdef __ASSEMBLY__
-#define PAGE_SIZE (1 << PAGE_SHIFT)
-#else
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
-#endif
+#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
#include <asm/setup.h>
@@ -27,6 +25,8 @@
#ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+
#include <asm/module.h>
#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
diff --git a/include/asm-m68k/processor.h b/include/asm-m68k/processor.h
index 8455f778b601..4453ec379c5d 100644
--- a/include/asm-m68k/processor.h
+++ b/include/asm-m68k/processor.h
@@ -38,12 +38,8 @@ static inline void wrusp(unsigned long usp)
#ifndef CONFIG_SUN3
#define TASK_SIZE (0xF0000000UL)
#else
-#ifdef __ASSEMBLY__
-#define TASK_SIZE (0x0E000000)
-#else
#define TASK_SIZE (0x0E000000UL)
#endif
-#endif
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
diff --git a/include/asm-m68k/termbits.h b/include/asm-m68k/termbits.h
index 0e520f328f53..8c14170996bb 100644
--- a/include/asm-m68k/termbits.h
+++ b/include/asm-m68k/termbits.h
@@ -141,6 +141,7 @@ struct ktermios {
#define HUPCL 0002000
#define CLOCAL 0004000
#define CBAUDEX 0010000
+#define BOTHER 0010000
#define B57600 0010001
#define B115200 0010002
#define B230400 0010003
@@ -156,10 +157,12 @@ struct ktermios {
#define B3000000 0010015
#define B3500000 0010016
#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate (not used) */
+#define CIBAUD 002003600000 /* input baud rate */
#define CMSPAR 010000000000 /* mark or space (stick) parity */
#define CRTSCTS 020000000000 /* flow control */
+#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
+
/* c_lflag bits */
#define ISIG 0000001
#define ICANON 0000002
diff --git a/include/asm-m68k/termios.h b/include/asm-m68k/termios.h
index 00edabd76168..0823032e4045 100644
--- a/include/asm-m68k/termios.h
+++ b/include/asm-m68k/termios.h
@@ -82,8 +82,10 @@ struct termio {
copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
})
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
#endif /* __KERNEL__ */
diff --git a/include/asm-m68knommu/pgtable.h b/include/asm-m68knommu/pgtable.h
index e1e6a1d2333a..46251016e821 100644
--- a/include/asm-m68knommu/pgtable.h
+++ b/include/asm-m68knommu/pgtable.h
@@ -65,4 +65,6 @@ extern unsigned int kobjsize(const void *objp);
#define VMALLOC_START 0
#define VMALLOC_END 0xffffffff
+#include <asm-generic/pgtable.h>
+
#endif /* _M68KNOMMU_PGTABLE_H */
diff --git a/include/linux/kbd_kern.h b/include/linux/kbd_kern.h
index 506ad20c18f8..8bdb16bfe5fb 100644
--- a/include/linux/kbd_kern.h
+++ b/include/linux/kbd_kern.h
@@ -161,4 +161,7 @@ static inline void con_schedule_flip(struct tty_struct *t)
schedule_delayed_work(&t->buf.work, 0);
}
+/* mac_hid.c */
+extern int mac_hid_mouse_emulate_buttons(int, unsigned int, int);
+
#endif
diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h
index e147cf50529f..5bdd656e88cf 100644
--- a/include/linux/mempolicy.h
+++ b/include/linux/mempolicy.h
@@ -166,7 +166,7 @@ extern enum zone_type policy_zone;
static inline void check_highest_zone(enum zone_type k)
{
- if (k > policy_zone)
+ if (k > policy_zone && k != ZONE_MOVABLE)
policy_zone = k;
}
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 655094dc9440..1692dd6cb915 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1042,7 +1042,7 @@ static inline void vma_nonlinear_insert(struct vm_area_struct *vma,
}
/* mmap.c */
-extern int __vm_enough_memory(long pages, int cap_sys_admin);
+extern int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin);
extern void vma_adjust(struct vm_area_struct *vma, unsigned long start,
unsigned long end, pgoff_t pgoff, struct vm_area_struct *insert);
extern struct vm_area_struct *vma_merge(struct mm_struct *,
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 3ea68cd3b61f..4e5627379b09 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -410,6 +410,24 @@ struct zonelist {
#endif
};
+#ifdef CONFIG_NUMA
+/*
+ * Only custom zonelists like MPOL_BIND need to be filtered as part of
+ * policies. As described in the comment for struct zonelist_cache, these
+ * zonelists will not have a zlcache so zlcache_ptr will not be set. Use
+ * that to determine if the zonelists needs to be filtered or not.
+ */
+static inline int alloc_should_filter_zonelist(struct zonelist *zonelist)
+{
+ return !zonelist->zlcache_ptr;
+}
+#else
+static inline int alloc_should_filter_zonelist(struct zonelist *zonelist)
+{
+ return 0;
+}
+#endif /* CONFIG_NUMA */
+
#ifdef CONFIG_ARCH_POPULATES_NODE_MAP
struct node_active_region {
unsigned long start_pfn;
diff --git a/include/linux/security.h b/include/linux/security.h
index c11dc8aa0351..1a15526e9f67 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -54,7 +54,7 @@ extern int cap_inode_removexattr(struct dentry *dentry, char *name);
extern int cap_task_post_setuid (uid_t old_ruid, uid_t old_euid, uid_t old_suid, int flags);
extern void cap_task_reparent_to_init (struct task_struct *p);
extern int cap_syslog (int type);
-extern int cap_vm_enough_memory (long pages);
+extern int cap_vm_enough_memory (struct mm_struct *mm, long pages);
struct msghdr;
struct sk_buff;
@@ -1125,6 +1125,7 @@ struct request_sock;
* Return 0 if permission is granted.
* @vm_enough_memory:
* Check permissions for allocating a new virtual mapping.
+ * @mm contains the mm struct it is being added to.
* @pages contains the number of pages.
* Return 0 if permission is granted.
*
@@ -1169,7 +1170,7 @@ struct security_operations {
int (*quota_on) (struct dentry * dentry);
int (*syslog) (int type);
int (*settime) (struct timespec *ts, struct timezone *tz);
- int (*vm_enough_memory) (long pages);
+ int (*vm_enough_memory) (struct mm_struct *mm, long pages);
int (*bprm_alloc_security) (struct linux_binprm * bprm);
void (*bprm_free_security) (struct linux_binprm * bprm);
@@ -1469,10 +1470,14 @@ static inline int security_settime(struct timespec *ts, struct timezone *tz)
return security_ops->settime(ts, tz);
}
-
static inline int security_vm_enough_memory(long pages)
{
- return security_ops->vm_enough_memory(pages);
+ return security_ops->vm_enough_memory(current->mm, pages);
+}
+
+static inline int security_vm_enough_memory_mm(struct mm_struct *mm, long pages)
+{
+ return security_ops->vm_enough_memory(mm, pages);
}
static inline int security_bprm_alloc (struct linux_binprm *bprm)
@@ -2219,7 +2224,12 @@ static inline int security_settime(struct timespec *ts, struct timezone *tz)
static inline int security_vm_enough_memory(long pages)
{
- return cap_vm_enough_memory(pages);
+ return cap_vm_enough_memory(current->mm, pages);
+}
+
+static inline int security_vm_enough_memory_mm(struct mm_struct *mm, long pages)
+{
+ return cap_vm_enough_memory(mm, pages);
}
static inline int security_bprm_alloc (struct linux_binprm *bprm)
diff --git a/include/linux/selection.h b/include/linux/selection.h
index ed3408b400f1..f9457861937c 100644
--- a/include/linux/selection.h
+++ b/include/linux/selection.h
@@ -10,6 +10,8 @@
#include <linux/tiocl.h>
#include <linux/vt_buffer.h>
+struct tty_struct;
+
extern struct vc_data *sel_cons;
extern void clear_selection(void);
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index 1c5ed7d92b0f..96c0d93fc2ca 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -118,6 +118,7 @@
#define UART_LSR_PE 0x04 /* Parity error indicator */
#define UART_LSR_OE 0x02 /* Overrun error indicator */
#define UART_LSR_DR 0x01 /* Receiver data ready */
+#define UART_LSR_BRK_ERROR_BITS 0x1E /* BI, FE, PE, OE bits */
#define UART_MSR 6 /* In: Modem Status Register */
#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 3401293359e8..04f3ffb8d9d4 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -2023,7 +2023,7 @@ int __audit_signal_info(int sig, struct task_struct *t)
axp->d.next = ctx->aux_pids;
ctx->aux_pids = (void *)axp;
}
- BUG_ON(axp->pid_count > AUDIT_AUX_PIDS);
+ BUG_ON(axp->pid_count >= AUDIT_AUX_PIDS);
axp->target_pid[axp->pid_count] = t->tgid;
selinux_get_task_sid(t, &axp->target_sid[axp->pid_count]);
diff --git a/kernel/futex.c b/kernel/futex.c
index 3415e9ad1391..e8935b195e88 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -1670,6 +1670,7 @@ pi_faulted:
attempt);
if (ret)
goto out;
+ uval = 0;
goto retry_unlocked;
}
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 203a518b6f14..853aefbd184b 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -462,7 +462,9 @@ void free_irq(unsigned int irq, void *dev_id)
* We do this after actually deregistering it, to make sure that
* a 'real' IRQ doesn't run in parallel with our fake
*/
+ local_irq_save(flags);
handler(irq, dev_id);
+ local_irq_restore(flags);
}
#endif
}
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 55b3761edaa9..7a15afb73ed0 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -547,9 +547,9 @@ sys_timer_create(const clockid_t which_clock,
new_timer->it_process = process;
list_add(&new_timer->list,
&process->signal->posix_timers);
- spin_unlock_irqrestore(&process->sighand->siglock, flags);
if (new_timer->it_sigev_notify == (SIGEV_SIGNAL|SIGEV_THREAD_ID))
get_task_struct(process);
+ spin_unlock_irqrestore(&process->sighand->siglock, flags);
} else {
spin_unlock_irqrestore(&process->sighand->siglock, flags);
process = NULL;
@@ -605,13 +605,14 @@ static struct k_itimer * lock_timer(timer_t timer_id, unsigned long *flags)
timr = (struct k_itimer *) idr_find(&posix_timers_id, (int) timer_id);
if (timr) {
spin_lock(&timr->it_lock);
- spin_unlock(&idr_lock);
if ((timr->it_id != timer_id) || !(timr->it_process) ||
timr->it_process->tgid != current->tgid) {
- unlock_timer(timr, *flags);
+ spin_unlock(&timr->it_lock);
+ spin_unlock_irqrestore(&idr_lock, *flags);
timr = NULL;
- }
+ } else
+ spin_unlock(&idr_lock);
} else
spin_unlock_irqrestore(&idr_lock, *flags);
diff --git a/kernel/signal.c b/kernel/signal.c
index b27c01a66448..ad63109e413c 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -378,7 +378,7 @@ int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
/* We only dequeue private signals from ourselves, we don't let
* signalfd steal them
*/
- if (tsk == current)
+ if (likely(tsk == current))
signr = __dequeue_signal(&tsk->pending, mask, info);
if (!signr) {
signr = __dequeue_signal(&tsk->signal->shared_pending,
@@ -425,7 +425,7 @@ int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
if (!(tsk->signal->flags & SIGNAL_GROUP_EXIT))
tsk->signal->flags |= SIGNAL_STOP_DEQUEUED;
}
- if ( signr &&
+ if (signr && likely(tsk == current) &&
((info->si_code & __SI_MASK) == __SI_TIMER) &&
info->si_sys_private){
/*
diff --git a/lib/Kconfig b/lib/Kconfig
index e5c2c514174a..ba3d104994d9 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -138,4 +138,7 @@ config HAS_DMA
depends on !NO_DMA
default y
+config CHECK_SIGNATURE
+ bool
+
endmenu
diff --git a/lib/Makefile b/lib/Makefile
index d9e5f1cd0bfb..6b0ba8cf4e5f 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -21,7 +21,8 @@ CFLAGS_kobject_uevent.o += -DDEBUG
endif
obj-$(CONFIG_GENERIC_IOMAP) += iomap.o
-obj-$(CONFIG_HAS_IOMEM) += iomap_copy.o devres.o check_signature.o
+obj-$(CONFIG_HAS_IOMEM) += iomap_copy.o devres.o
+obj-$(CONFIG_CHECK_SIGNATURE) += check_signature.o
obj-$(CONFIG_DEBUG_LOCKING_API_SELFTESTS) += locking-selftest.o
obj-$(CONFIG_DEBUG_SPINLOCK) += spinlock_debug.o
lib-$(CONFIG_RWSEM_GENERIC_SPINLOCK) += rwsem-spinlock.o
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index d7ca59d66c59..de4cf458d6e1 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -643,7 +643,7 @@ int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma,
spin_unlock(&mm->page_table_lock);
ret = hugetlb_fault(mm, vma, vaddr, 0);
spin_lock(&mm->page_table_lock);
- if (!(ret & VM_FAULT_MAJOR))
+ if (!(ret & VM_FAULT_ERROR))
continue;
remainder = 0;
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 71b84b45154a..172abffeb2e3 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -149,7 +149,7 @@ static struct zonelist *bind_zonelist(nodemask_t *nodes)
lower zones etc. Avoid empty zones because the memory allocator
doesn't like them. If you implement node hot removal you
have to fix that. */
- k = policy_zone;
+ k = MAX_NR_ZONES - 1;
while (1) {
for_each_node_mask(nd, *nodes) {
struct zone *z = &NODE_DATA(nd)->node_zones[k];
diff --git a/mm/mmap.c b/mm/mmap.c
index b6537211b9cc..0d40e66c841b 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -93,7 +93,7 @@ atomic_t vm_committed_space = ATOMIC_INIT(0);
* Note this is a helper function intended to be used by LSMs which
* wish to use this logic.
*/
-int __vm_enough_memory(long pages, int cap_sys_admin)
+int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin)
{
unsigned long free, allowed;
@@ -166,7 +166,7 @@ int __vm_enough_memory(long pages, int cap_sys_admin)
/* Don't let a single process grow too big:
leave 3% of the size of this process for other processes */
- allowed -= current->mm->total_vm / 32;
+ allowed -= mm->total_vm / 32;
/*
* cast `allowed' as a signed long because vm_committed_space
@@ -2077,7 +2077,7 @@ int insert_vm_struct(struct mm_struct * mm, struct vm_area_struct * vma)
if (__vma && __vma->vm_start < vma->vm_end)
return -ENOMEM;
if ((vma->vm_flags & VM_ACCOUNT) &&
- security_vm_enough_memory(vma_pages(vma)))
+ security_vm_enough_memory_mm(mm, vma_pages(vma)))
return -ENOMEM;
vma_link(mm, vma, prev, rb_link, rb_parent);
return 0;
diff --git a/mm/nommu.c b/mm/nommu.c
index 9eef6a398555..8ed0cb43118a 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -1270,7 +1270,7 @@ EXPORT_SYMBOL(get_unmapped_area);
* Note this is a helper function intended to be used by LSMs which
* wish to use this logic.
*/
-int __vm_enough_memory(long pages, int cap_sys_admin)
+int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin)
{
unsigned long free, allowed;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 3da85b81dabb..6427653023aa 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1157,6 +1157,7 @@ get_page_from_freelist(gfp_t gfp_mask, unsigned int order,
nodemask_t *allowednodes = NULL;/* zonelist_cache approximation */
int zlc_active = 0; /* set if using zonelist_cache */
int did_zlc_setup = 0; /* just call zlc_setup() one time */
+ enum zone_type highest_zoneidx = -1; /* Gets set for policy zonelists */
zonelist_scan:
/*
@@ -1166,6 +1167,18 @@ zonelist_scan:
z = zonelist->zones;
do {
+ /*
+ * In NUMA, this could be a policy zonelist which contains
+ * zones that may not be allowed by the current gfp_mask.
+ * Check the zone is allowed by the current flags
+ */
+ if (unlikely(alloc_should_filter_zonelist(zonelist))) {
+ if (highest_zoneidx == -1)
+ highest_zoneidx = gfp_zone(gfp_mask);
+ if (zone_idx(*z) > highest_zoneidx)
+ continue;
+ }
+
if (NUMA_BUILD && zlc_active &&
!zlc_zone_worth_trying(zonelist, z, allowednodes))
continue;
diff --git a/mm/slab.c b/mm/slab.c
index a684778b2b41..6f6abef83a1a 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -883,6 +883,7 @@ static void __slab_error(const char *function, struct kmem_cache *cachep,
*/
static int use_alien_caches __read_mostly = 1;
+static int numa_platform __read_mostly = 1;
static int __init noaliencache_setup(char *s)
{
use_alien_caches = 0;
@@ -1399,8 +1400,10 @@ void __init kmem_cache_init(void)
int order;
int node;
- if (num_possible_nodes() == 1)
+ if (num_possible_nodes() == 1) {
use_alien_caches = 0;
+ numa_platform = 0;
+ }
for (i = 0; i < NUM_INIT_LISTS; i++) {
kmem_list3_init(&initkmem_list3[i]);
@@ -3558,7 +3561,14 @@ static inline void __cache_free(struct kmem_cache *cachep, void *objp)
check_irq_off();
objp = cache_free_debugcheck(cachep, objp, __builtin_return_address(0));
- if (cache_free_alien(cachep, objp))
+ /*
+ * Skip calling cache_free_alien() when the platform is not numa.
+ * This will avoid cache misses that happen while accessing slabp (which
+ * is per page memory reference) to get nodeid. Instead use a global
+ * variable to skip the call, which is mostly likely to be present in
+ * the cache.
+ */
+ if (numa_platform && cache_free_alien(cachep, objp))
return;
if (likely(ac->avail < ac->limit)) {
diff --git a/mm/slub.c b/mm/slub.c
index 69d02e3e439e..04151da399c6 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1877,9 +1877,16 @@ static struct kmem_cache_node * __init early_kmem_cache_node_alloc(gfp_t gfpflag
BUG_ON(kmalloc_caches->size < sizeof(struct kmem_cache_node));
- page = new_slab(kmalloc_caches, gfpflags | GFP_THISNODE, node);
+ page = new_slab(kmalloc_caches, gfpflags, node);
BUG_ON(!page);
+ if (page_to_nid(page) != node) {
+ printk(KERN_ERR "SLUB: Unable to allocate memory from "
+ "node %d\n", node);
+ printk(KERN_ERR "SLUB: Allocating a useless per node structure "
+ "in order to be able to continue\n");
+ }
+
n = page->freelist;
BUG_ON(!n);
page->freelist = get_freepointer(kmalloc_caches, n);
@@ -3112,7 +3119,7 @@ static int list_locations(struct kmem_cache *s, char *buf,
unsigned long flags;
struct page *page;
- if (!atomic_read(&n->nr_slabs))
+ if (!atomic_long_read(&n->nr_slabs))
continue;
spin_lock_irqsave(&n->list_lock, flags);
@@ -3247,7 +3254,7 @@ static unsigned long slab_objects(struct kmem_cache *s,
}
if (flags & SO_FULL) {
- int full_slabs = atomic_read(&n->nr_slabs)
+ int full_slabs = atomic_long_read(&n->nr_slabs)
- per_cpu[node]
- n->nr_partial;
@@ -3283,7 +3290,7 @@ static int any_slab_objects(struct kmem_cache *s)
for_each_node(node) {
struct kmem_cache_node *n = get_node(s, node);
- if (n->nr_partial || atomic_read(&n->nr_slabs))
+ if (n->nr_partial || atomic_long_read(&n->nr_slabs))
return 1;
}
return 0;
diff --git a/mm/sparse.c b/mm/sparse.c
index 3047bf06c1f3..239f5a720d38 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -41,6 +41,15 @@ int page_to_nid(struct page *page)
return section_to_node_table[page_to_section(page)];
}
EXPORT_SYMBOL(page_to_nid);
+
+static void set_section_nid(unsigned long section_nr, int nid)
+{
+ section_to_node_table[section_nr] = nid;
+}
+#else /* !NODE_NOT_IN_PAGE_FLAGS */
+static inline void set_section_nid(unsigned long section_nr, int nid)
+{
+}
#endif
#ifdef CONFIG_SPARSEMEM_EXTREME
@@ -68,10 +77,6 @@ static int __meminit sparse_index_init(unsigned long section_nr, int nid)
struct mem_section *section;
int ret = 0;
-#ifdef NODE_NOT_IN_PAGE_FLAGS
- section_to_node_table[section_nr] = nid;
-#endif
-
if (mem_section[root])
return -EEXIST;
@@ -148,6 +153,7 @@ void __init memory_present(int nid, unsigned long start, unsigned long end)
struct mem_section *ms;
sparse_index_init(section, nid);
+ set_section_nid(section, nid);
ms = __nr_to_section(section);
if (!ms->section_mem_map)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index d419e10e3daa..a6e65d024995 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -271,6 +271,12 @@ static void handle_write_error(struct address_space *mapping,
unlock_page(page);
}
+/* Request for sync pageout. */
+enum pageout_io {
+ PAGEOUT_IO_ASYNC,
+ PAGEOUT_IO_SYNC,
+};
+
/* possible outcome of pageout() */
typedef enum {
/* failed to write page out, page is locked */
@@ -287,7 +293,8 @@ typedef enum {
* pageout is called by shrink_page_list() for each dirty page.
* Calls ->writepage().
*/
-static pageout_t pageout(struct page *page, struct address_space *mapping)
+static pageout_t pageout(struct page *page, struct address_space *mapping,
+ enum pageout_io sync_writeback)
{
/*
* If the page is dirty, only perform writeback if that write
@@ -346,6 +353,15 @@ static pageout_t pageout(struct page *page, struct address_space *mapping)
ClearPageReclaim(page);
return PAGE_ACTIVATE;
}
+
+ /*
+ * Wait on writeback if requested to. This happens when
+ * direct reclaiming a large contiguous area and the
+ * first attempt to free a range of pages fails.
+ */
+ if (PageWriteback(page) && sync_writeback == PAGEOUT_IO_SYNC)
+ wait_on_page_writeback(page);
+
if (!PageWriteback(page)) {
/* synchronous write or broken a_ops? */
ClearPageReclaim(page);
@@ -423,7 +439,8 @@ cannot_free:
* shrink_page_list() returns the number of reclaimed pages
*/
static unsigned long shrink_page_list(struct list_head *page_list,
- struct scan_control *sc)
+ struct scan_control *sc,
+ enum pageout_io sync_writeback)
{
LIST_HEAD(ret_pages);
struct pagevec freed_pvec;
@@ -458,8 +475,23 @@ static unsigned long shrink_page_list(struct list_head *page_list,
if (page_mapped(page) || PageSwapCache(page))
sc->nr_scanned++;
- if (PageWriteback(page))
- goto keep_locked;
+ may_enter_fs = (sc->gfp_mask & __GFP_FS) ||
+ (PageSwapCache(page) && (sc->gfp_mask & __GFP_IO));
+
+ if (PageWriteback(page)) {
+ /*
+ * Synchronous reclaim is performed in two passes,
+ * first an asynchronous pass over the list to
+ * start parallel writeback, and a second synchronous
+ * pass to wait for the IO to complete. Wait here
+ * for any page for which writeback has already
+ * started.
+ */
+ if (sync_writeback == PAGEOUT_IO_SYNC && may_enter_fs)
+ wait_on_page_writeback(page);
+ else
+ goto keep_locked;
+ }
referenced = page_referenced(page, 1);
/* In active use or really unfreeable? Activate it. */
@@ -478,8 +510,6 @@ static unsigned long shrink_page_list(struct list_head *page_list,
#endif /* CONFIG_SWAP */
mapping = page_mapping(page);
- may_enter_fs = (sc->gfp_mask & __GFP_FS) ||
- (PageSwapCache(page) && (sc->gfp_mask & __GFP_IO));
/*
* The page is mapped into the page tables of one or more
@@ -505,7 +535,7 @@ static unsigned long shrink_page_list(struct list_head *page_list,
goto keep_locked;
/* Page is dirty, try to write it out here */
- switch(pageout(page, mapping)) {
+ switch (pageout(page, mapping, sync_writeback)) {
case PAGE_KEEP:
goto keep_locked;
case PAGE_ACTIVATE:
@@ -777,6 +807,7 @@ static unsigned long shrink_inactive_list(unsigned long max_scan,
(sc->order > PAGE_ALLOC_COSTLY_ORDER)?
ISOLATE_BOTH : ISOLATE_INACTIVE);
nr_active = clear_active_flags(&page_list);
+ __count_vm_events(PGDEACTIVATE, nr_active);
__mod_zone_page_state(zone, NR_ACTIVE, -nr_active);
__mod_zone_page_state(zone, NR_INACTIVE,
@@ -785,7 +816,29 @@ static unsigned long shrink_inactive_list(unsigned long max_scan,
spin_unlock_irq(&zone->lru_lock);
nr_scanned += nr_scan;
- nr_freed = shrink_page_list(&page_list, sc);
+ nr_freed = shrink_page_list(&page_list, sc, PAGEOUT_IO_ASYNC);
+
+ /*
+ * If we are direct reclaiming for contiguous pages and we do
+ * not reclaim everything in the list, try again and wait
+ * for IO to complete. This will stall high-order allocations
+ * but that should be acceptable to the caller
+ */
+ if (nr_freed < nr_taken && !current_is_kswapd() &&
+ sc->order > PAGE_ALLOC_COSTLY_ORDER) {
+ congestion_wait(WRITE, HZ/10);
+
+ /*
+ * The attempt at page out may have made some
+ * of the pages active, mark them inactive again.
+ */
+ nr_active = clear_active_flags(&page_list);
+ count_vm_events(PGDEACTIVATE, nr_active);
+
+ nr_freed += shrink_page_list(&page_list, sc,
+ PAGEOUT_IO_SYNC);
+ }
+
nr_reclaimed += nr_freed;
local_irq_disable();
if (current_is_kswapd()) {
diff --git a/security/commoncap.c b/security/commoncap.c
index 338606eb7238..7520361663e8 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -315,13 +315,13 @@ int cap_syslog (int type)
return 0;
}
-int cap_vm_enough_memory(long pages)
+int cap_vm_enough_memory(struct mm_struct *mm, long pages)
{
int cap_sys_admin = 0;
if (cap_capable(current, CAP_SYS_ADMIN) == 0)
cap_sys_admin = 1;
- return __vm_enough_memory(pages, cap_sys_admin);
+ return __vm_enough_memory(mm, pages, cap_sys_admin);
}
EXPORT_SYMBOL(cap_capable);
diff --git a/security/dummy.c b/security/dummy.c
index 19d813d5e083..853ec2292798 100644
--- a/security/dummy.c
+++ b/security/dummy.c
@@ -108,13 +108,13 @@ static int dummy_settime(struct timespec *ts, struct timezone *tz)
return 0;
}
-static int dummy_vm_enough_memory(long pages)
+static int dummy_vm_enough_memory(struct mm_struct *mm, long pages)
{
int cap_sys_admin = 0;
if (dummy_capable(current, CAP_SYS_ADMIN) == 0)
cap_sys_admin = 1;
- return __vm_enough_memory(pages, cap_sys_admin);
+ return __vm_enough_memory(mm, pages, cap_sys_admin);
}
static int dummy_bprm_alloc_security (struct linux_binprm *bprm)
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 6237933f7d82..d8bc4172819c 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -1584,7 +1584,7 @@ static int selinux_syslog(int type)
* Do not audit the selinux permission check, as this is applied to all
* processes that allocate mappings.
*/
-static int selinux_vm_enough_memory(long pages)
+static int selinux_vm_enough_memory(struct mm_struct *mm, long pages)
{
int rc, cap_sys_admin = 0;
struct task_security_struct *tsec = current->security;
@@ -1600,7 +1600,7 @@ static int selinux_vm_enough_memory(long pages)
if (rc == 0)
cap_sys_admin = 1;
- return __vm_enough_memory(pages, cap_sys_admin);
+ return __vm_enough_memory(mm, pages, cap_sys_admin);
}
/* binprm security operations */