diff options
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 11 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 189 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 29 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/sge.c | 322 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 41 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_hw.h | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_values.h | 6 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h | 24 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4vf/sge.c | 27 |
9 files changed, 571 insertions, 79 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h index 568715a13b5c..b7b0eb104430 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h @@ -617,6 +617,7 @@ enum { /* adapter flags */ FW_OFLD_CONN = (1 << 9), ROOT_NO_RELAXED_ORDERING = (1 << 10), SHUTTING_DOWN = (1 << 11), + SGE_DBQ_TIMER = (1 << 12), }; enum { @@ -756,6 +757,8 @@ struct sge_eth_txq { /* state for an SGE Ethernet Tx queue */ #ifdef CONFIG_CHELSIO_T4_DCB u8 dcb_prio; /* DCB Priority bound to queue */ #endif + u8 dbqt; /* SGE Doorbell Queue Timer in use */ + unsigned int dbqtimerix; /* SGE Doorbell Queue Timer Index */ unsigned long tso; /* # of TSO requests */ unsigned long tx_cso; /* # of Tx checksum offloads */ unsigned long vlan_ins; /* # of Tx VLAN insertions */ @@ -816,6 +819,8 @@ struct sge { u16 nqs_per_uld; /* # of Rx queues per ULD */ u16 timer_val[SGE_NTIMERS]; u8 counter_val[SGE_NCOUNTERS]; + u16 dbqtimer_tick; + u16 dbqtimer_val[SGE_NDBQTIMERS]; u32 fl_pg_order; /* large page allocation size */ u32 stat_len; /* length of status page at ring end */ u32 pktshift; /* padding between CPL & packet data */ @@ -1402,7 +1407,7 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq, rspq_flush_handler_t flush_handler, int cong); int t4_sge_alloc_eth_txq(struct adapter *adap, struct sge_eth_txq *txq, struct net_device *dev, struct netdev_queue *netdevq, - unsigned int iqid); + unsigned int iqid, u8 dbqt); int t4_sge_alloc_ctrl_txq(struct adapter *adap, struct sge_ctrl_txq *txq, struct net_device *dev, unsigned int iqid, unsigned int cmplqid); @@ -1415,6 +1420,8 @@ irqreturn_t t4_sge_intr_msix(int irq, void *cookie); int t4_sge_init(struct adapter *adap); void t4_sge_start(struct adapter *adap); void t4_sge_stop(struct adapter *adap); +int t4_sge_eth_txq_egress_update(struct adapter *adap, struct sge_eth_txq *q, + int maxreclaim); void cxgb4_set_ethtool_ops(struct net_device *netdev); int cxgb4_write_rss(const struct port_info *pi, const u16 *queues); enum cpl_tx_tnl_lso_type cxgb_encap_offload_supported(struct sk_buff *skb); @@ -1821,6 +1828,8 @@ int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, int t4_ofld_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, unsigned int vf, unsigned int eqid); int t4_sge_ctxt_flush(struct adapter *adap, unsigned int mbox, int ctxt_type); +int t4_read_sge_dbqtimers(struct adapter *adap, unsigned int ndbqtimers, + u16 *dbqtimers); void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl); int t4_update_port_info(struct port_info *pi); int t4_get_link_params(struct port_info *pi, unsigned int *link_okp, diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c index 796043544fc3..65b8dc706c1d 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c @@ -932,11 +932,190 @@ static int get_adaptive_rx_setting(struct net_device *dev) return q->rspq.adaptive_rx; } -static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) +/* Return the current global Adapter SGE Doorbell Queue Timer Tick for all + * Ethernet TX Queues. + */ +static int get_dbqtimer_tick(struct net_device *dev) +{ + struct port_info *pi = netdev_priv(dev); + struct adapter *adap = pi->adapter; + + if (!(adap->flags & SGE_DBQ_TIMER)) + return 0; + + return adap->sge.dbqtimer_tick; +} + +/* Return the SGE Doorbell Queue Timer Value for the Ethernet TX Queues + * associated with a Network Device. + */ +static int get_dbqtimer(struct net_device *dev) +{ + struct port_info *pi = netdev_priv(dev); + struct adapter *adap = pi->adapter; + struct sge_eth_txq *txq; + + txq = &adap->sge.ethtxq[pi->first_qset]; + + if (!(adap->flags & SGE_DBQ_TIMER)) + return 0; + + /* all of the TX Queues use the same Timer Index */ + return adap->sge.dbqtimer_val[txq->dbqtimerix]; +} + +/* Set the global Adapter SGE Doorbell Queue Timer Tick for all Ethernet TX + * Queues. This is the fundamental "Tick" that sets the scale of values which + * can be used. Individual Ethernet TX Queues index into a relatively small + * array of Tick Multipliers. Changing the base Tick will thus change all of + * the resulting Timer Values associated with those multipliers for all + * Ethernet TX Queues. + */ +static int set_dbqtimer_tick(struct net_device *dev, int usecs) +{ + struct port_info *pi = netdev_priv(dev); + struct adapter *adap = pi->adapter; + struct sge *s = &adap->sge; + u32 param, val; + int ret; + + if (!(adap->flags & SGE_DBQ_TIMER)) + return 0; + + /* return early if it's the same Timer Tick we're already using */ + if (s->dbqtimer_tick == usecs) + return 0; + + /* attempt to set the new Timer Tick value */ + param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_DBQ_TIMERTICK)); + val = usecs; + ret = t4_set_params(adap, adap->mbox, adap->pf, 0, 1, ¶m, &val); + if (ret) + return ret; + s->dbqtimer_tick = usecs; + + /* if successful, reread resulting dependent Timer values */ + ret = t4_read_sge_dbqtimers(adap, ARRAY_SIZE(s->dbqtimer_val), + s->dbqtimer_val); + return ret; +} + +/* Set the SGE Doorbell Queue Timer Value for the Ethernet TX Queues + * associated with a Network Device. There is a relatively small array of + * possible Timer Values so we need to pick the closest value available. + */ +static int set_dbqtimer(struct net_device *dev, int usecs) +{ + int qix, timerix, min_timerix, delta, min_delta; + struct port_info *pi = netdev_priv(dev); + struct adapter *adap = pi->adapter; + struct sge *s = &adap->sge; + struct sge_eth_txq *txq; + u32 param, val; + int ret; + + if (!(adap->flags & SGE_DBQ_TIMER)) + return 0; + + /* Find the SGE Doorbell Timer Value that's closest to the requested + * value. + */ + min_delta = INT_MAX; + min_timerix = 0; + for (timerix = 0; timerix < ARRAY_SIZE(s->dbqtimer_val); timerix++) { + delta = s->dbqtimer_val[timerix] - usecs; + if (delta < 0) + delta = -delta; + if (delta < min_delta) { + min_delta = delta; + min_timerix = timerix; + } + } + + /* Return early if it's the same Timer Index we're already using. + * We use the same Timer Index for all of the TX Queues for an + * interface so it's only necessary to check the first one. + */ + txq = &s->ethtxq[pi->first_qset]; + if (txq->dbqtimerix == min_timerix) + return 0; + + for (qix = 0; qix < pi->nqsets; qix++, txq++) { + if (adap->flags & FULL_INIT_DONE) { + param = + (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DMAQ) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DMAQ_EQ_TIMERIX) | + FW_PARAMS_PARAM_YZ_V(txq->q.cntxt_id)); + val = min_timerix; + ret = t4_set_params(adap, adap->mbox, adap->pf, 0, + 1, ¶m, &val); + if (ret) + return ret; + } + txq->dbqtimerix = min_timerix; + } + return 0; +} + +/* Set the global Adapter SGE Doorbell Queue Timer Tick for all Ethernet TX + * Queues and the Timer Value for the Ethernet TX Queues associated with a + * Network Device. Since changing the global Tick changes all of the + * available Timer Values, we need to do this first before selecting the + * resulting closest Timer Value. Moreover, since the Tick is global, + * changing it affects the Timer Values for all Network Devices on the + * adapter. So, before changing the Tick, we grab all of the current Timer + * Values for other Network Devices on this Adapter and then attempt to select + * new Timer Values which are close to the old values ... + */ +static int set_dbqtimer_tickval(struct net_device *dev, + int tick_usecs, int timer_usecs) +{ + struct port_info *pi = netdev_priv(dev); + struct adapter *adap = pi->adapter; + int timer[MAX_NPORTS]; + unsigned int port; + int ret; + + /* Grab the other adapter Network Interface current timers and fill in + * the new one for this Network Interface. + */ + for_each_port(adap, port) + if (port == pi->port_id) + timer[port] = timer_usecs; + else + timer[port] = get_dbqtimer(adap->port[port]); + + /* Change the global Tick first ... */ + ret = set_dbqtimer_tick(dev, tick_usecs); + if (ret) + return ret; + + /* ... and then set all of the Network Interface Timer Values ... */ + for_each_port(adap, port) { + ret = set_dbqtimer(adap->port[port], timer[port]); + if (ret) + return ret; + } + + return 0; +} + +static int set_coalesce(struct net_device *dev, + struct ethtool_coalesce *coalesce) { - set_adaptive_rx_setting(dev, c->use_adaptive_rx_coalesce); - return set_rx_intr_params(dev, c->rx_coalesce_usecs, - c->rx_max_coalesced_frames); + int ret; + + set_adaptive_rx_setting(dev, coalesce->use_adaptive_rx_coalesce); + + ret = set_rx_intr_params(dev, coalesce->rx_coalesce_usecs, + coalesce->rx_max_coalesced_frames); + if (ret) + return ret; + + return set_dbqtimer_tickval(dev, + coalesce->tx_coalesce_usecs_irq, + coalesce->tx_coalesce_usecs); } static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) @@ -949,6 +1128,8 @@ static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) c->rx_max_coalesced_frames = (rq->intr_params & QINTR_CNT_EN_F) ? adap->sge.counter_val[rq->pktcnt_idx] : 0; c->use_adaptive_rx_coalesce = get_adaptive_rx_setting(dev); + c->tx_coalesce_usecs_irq = get_dbqtimer_tick(dev); + c->tx_coalesce_usecs = get_dbqtimer(dev); return 0; } diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index adf75d16e6d3..bcbac247a73d 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -575,7 +575,7 @@ static int fwevtq_handler(struct sge_rspq *q, const __be64 *rsp, struct sge_eth_txq *eq; eq = container_of(txq, struct sge_eth_txq, q); - netif_tx_wake_queue(eq->txq); + t4_sge_eth_txq_egress_update(q->adap, eq, -1); } else { struct sge_uld_txq *oq; @@ -933,10 +933,13 @@ static int setup_sge_queues(struct adapter *adap) q->rspq.idx = j; memset(&q->stats, 0, sizeof(q->stats)); } - for (j = 0; j < pi->nqsets; j++, t++) { + + q = &s->ethrxq[pi->first_qset]; + for (j = 0; j < pi->nqsets; j++, t++, q++) { err = t4_sge_alloc_eth_txq(adap, t, dev, netdev_get_tx_queue(dev, j), - s->fw_evtq.cntxt_id); + q->rspq.cntxt_id, + !!(adap->flags & SGE_DBQ_TIMER)); if (err) goto freeout; } @@ -958,7 +961,7 @@ static int setup_sge_queues(struct adapter *adap) if (!is_t4(adap->params.chip)) { err = t4_sge_alloc_eth_txq(adap, &s->ptptxq, adap->port[0], netdev_get_tx_queue(adap->port[0], 0) - , s->fw_evtq.cntxt_id); + , s->fw_evtq.cntxt_id, false); if (err) goto freeout; } @@ -4325,6 +4328,24 @@ static int adap_init0(struct adapter *adap) if (ret < 0) goto bye; + /* Grab the SGE Doorbell Queue Timer values. If successful, that + * indicates that the Firmware and Hardware support this. + */ + params[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_DBQ_TIMERTICK)); + ret = t4_query_params(adap, adap->mbox, adap->pf, 0, + 1, params, val); + + if (!ret) { + adap->sge.dbqtimer_tick = val[0]; + ret = t4_read_sge_dbqtimers(adap, + ARRAY_SIZE(adap->sge.dbqtimer_val), + adap->sge.dbqtimer_val); + } + + if (!ret) + adap->flags |= SGE_DBQ_TIMER; + if (is_bypass_device(adap->pdev->device)) adap->params.bypass = 1; diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c index fc0bc6458e84..f18493fb32aa 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -80,9 +80,10 @@ * Max number of Tx descriptors we clean up at a time. Should be modest as * freeing skbs isn't cheap and it happens while holding locks. We just need * to free packets faster than they arrive, we eventually catch up and keep - * the amortized cost reasonable. Must be >= 2 * TXQ_STOP_THRES. + * the amortized cost reasonable. Must be >= 2 * TXQ_STOP_THRES. It should + * also match the CIDX Flush Threshold. */ -#define MAX_TX_RECLAIM 16 +#define MAX_TX_RECLAIM 32 /* * Max number of Rx buffers we replenish at a time. Again keep this modest, @@ -401,31 +402,52 @@ static inline int reclaimable(const struct sge_txq *q) } /** - * cxgb4_reclaim_completed_tx - reclaims completed Tx descriptors + * reclaim_completed_tx - reclaims completed TX Descriptors * @adap: the adapter * @q: the Tx queue to reclaim completed descriptors from + * @maxreclaim: the maximum number of TX Descriptors to reclaim or -1 * @unmap: whether the buffers should be unmapped for DMA * - * Reclaims Tx descriptors that the SGE has indicated it has processed, - * and frees the associated buffers if possible. Called with the Tx - * queue locked. + * Reclaims Tx Descriptors that the SGE has indicated it has processed, + * and frees the associated buffers if possible. If @max == -1, then + * we'll use a defaiult maximum. Called with the TX Queue locked. */ -inline void cxgb4_reclaim_completed_tx(struct adapter *adap, struct sge_txq *q, - bool unmap) +static inline int reclaim_completed_tx(struct adapter *adap, struct sge_txq *q, + int maxreclaim, bool unmap) { - int avail = reclaimable(q); + int reclaim = reclaimable(q); - if (avail) { + if (reclaim) { /* * Limit the amount of clean up work we do at a time to keep * the Tx lock hold time O(1). */ - if (avail > MAX_TX_RECLAIM) - avail = MAX_TX_RECLAIM; + if (maxreclaim < 0) + maxreclaim = MAX_TX_RECLAIM; + if (reclaim > maxreclaim) + reclaim = maxreclaim; - free_tx_desc(adap, q, avail, unmap); - q->in_use -= avail; + free_tx_desc(adap, q, reclaim, unmap); + q->in_use -= reclaim; } + + return reclaim; +} + +/** + * cxgb4_reclaim_completed_tx - reclaims completed Tx descriptors + * @adap: the adapter + * @q: the Tx queue to reclaim completed descriptors from + * @unmap: whether the buffers should be unmapped for DMA + * + * Reclaims Tx descriptors that the SGE has indicated it has processed, + * and frees the associated buffers if possible. Called with the Tx + * queue locked. + */ +void cxgb4_reclaim_completed_tx(struct adapter *adap, struct sge_txq *q, + bool unmap) +{ + (void)reclaim_completed_tx(adap, q, -1, unmap); } EXPORT_SYMBOL(cxgb4_reclaim_completed_tx); @@ -1288,6 +1310,44 @@ static inline void t6_fill_tnl_lso(struct sk_buff *skb, } /** + * t4_sge_eth_txq_egress_update - handle Ethernet TX Queue update + * @adap: the adapter + * @eq: the Ethernet TX Queue + * @maxreclaim: the maximum number of TX Descriptors to reclaim or -1 + * + * We're typically called here to update the state of an Ethernet TX + * Queue with respect to the hardware's progress in consuming the TX + * Work Requests that we've put on that Egress Queue. This happens + * when we get Egress Queue Update messages and also prophylactically + * in regular timer-based Ethernet TX Queue maintenance. + */ +int t4_sge_eth_txq_egress_update(struct adapter *adap, struct sge_eth_txq *eq, + int maxreclaim) +{ + struct sge_txq *q = &eq->q; + unsigned int reclaimed; + + if (!q->in_use || !__netif_tx_trylock(eq->txq)) + return 0; + + /* Reclaim pending completed TX Descriptors. */ + reclaimed = reclaim_completed_tx(adap, &eq->q, maxreclaim, true); + + /* If the TX Queue is currently stopped and there's now more than half + * the queue available, restart it. Otherwise bail out since the rest + * of what we want do here is with the possibility of shipping any + * currently buffered Coalesced TX Work Request. + */ + if (netif_tx_queue_stopped(eq->txq) && txq_avail(q) > (q->size / 2)) { + netif_tx_wake_queue(eq->txq); + eq->q.restarts++; + } + + __netif_tx_unlock(eq->txq); + return reclaimed; +} + +/** * cxgb4_eth_xmit - add a packet to an Ethernet Tx queue * @skb: the packet * @dev: the egress net device @@ -1357,7 +1417,7 @@ out_free: dev_kfree_skb_any(skb); } skb_tx_timestamp(skb); - cxgb4_reclaim_completed_tx(adap, &q->q, true); + reclaim_completed_tx(adap, &q->q, -1, true); cntrl = TXPKT_L4CSUM_DIS_F | TXPKT_IPCSUM_DIS_F; #ifdef CONFIG_CHELSIO_T4_FCOE @@ -1400,8 +1460,25 @@ out_free: dev_kfree_skb_any(skb); wr_mid = FW_WR_LEN16_V(DIV_ROUND_UP(flits, 2)); if (unlikely(credits < ETHTXQ_STOP_THRES)) { + /* After we're done injecting the Work Request for this + * packet, we'll be below our "stop threshold" so stop the TX + * Queue now and schedule a request for an SGE Egress Queue + * Update message. The queue will get started later on when + * the firmware processes this Work Request and sends us an + * Egress Queue Status Update message indicating that space + * has opened up. + */ eth_txq_stop(q); - wr_mid |= FW_WR_EQUEQ_F | FW_WR_EQUIQ_F; + + /* If we're using the SGE Doorbell Queue Timer facility, we + * don't need to ask the Firmware to send us Egress Queue CIDX + * Updates: the Hardware will do this automatically. And + * since we send the Ingress Queue CIDX Updates to the + * corresponding Ethernet Response Queue, we'll get them very + * quickly. + */ + if (!q->dbqt) + wr_mid |= FW_WR_EQUEQ_F | FW_WR_EQUIQ_F; } wr = (void *)&q->q.desc[q->q.pidx]; @@ -1671,7 +1748,7 @@ static netdev_tx_t cxgb4_vf_eth_xmit(struct sk_buff *skb, /* Take this opportunity to reclaim any TX Descriptors whose DMA * transfers have completed. */ - cxgb4_reclaim_completed_tx(adapter, &txq->q, true); + reclaim_completed_tx(adapter, &txq->q, -1, true); /* Calculate the number of flits and TX Descriptors we're going to * need along with how many TX Descriptors will be left over after @@ -1715,7 +1792,16 @@ static netdev_tx_t cxgb4_vf_eth_xmit(struct sk_buff *skb, * has opened up. */ eth_txq_stop(txq); - wr_mid |= FW_WR_EQUEQ_F | FW_WR_EQUIQ_F; + + /* If we're using the SGE Doorbell Queue Timer facility, we + * don't need to ask the Firmware to send us Egress Queue CIDX + * Updates: the Hardware will do this automatically. And + * since we send the Ingress Queue CIDX Updates to the + * corresponding Ethernet Response Queue, we'll get them very + * quickly. + */ + if (!txq->dbqt) + wr_mid |= FW_WR_EQUEQ_F | FW_WR_EQUIQ_F; } /* Start filling in our Work Request. Note that we do _not_ handle @@ -2794,6 +2880,74 @@ static int t4_tx_hststamp(struct adapter *adapter, struct sk_buff *skb, } /** + * t4_tx_completion_handler - handle CPL_SGE_EGR_UPDATE messages + * @rspq: Ethernet RX Response Queue associated with Ethernet TX Queue + * @rsp: Response Entry pointer into Response Queue + * @gl: Gather List pointer + * + * For adapters which support the SGE Doorbell Queue Timer facility, + * we configure the Ethernet TX Queues to send CIDX Updates to the + * Associated Ethernet RX Response Queue with CPL_SGE_EGR_UPDATE + * messages. This adds a small load to PCIe Link RX bandwidth and, + * potentially, higher CPU Interrupt load, but allows us to respond + * much more quickly to the CIDX Updates. This is important for + * Upper Layer Software which isn't willing to have a large amount + * of TX Data outstanding before receiving DMA Completions. + */ +static void t4_tx_completion_handler(struct sge_rspq *rspq, + const __be64 *rsp, + const struct pkt_gl *gl) +{ + u8 opcode = ((const struct rss_header *)rsp)->opcode; + struct port_info *pi = netdev_priv(rspq->netdev); + struct adapter *adapter = rspq->adap; + struct sge *s = &adapter->sge; + struct sge_eth_txq *txq; + + /* skip RSS header */ + rsp++; + + /* FW can send EGR_UPDATEs encapsulated in a CPL_FW4_MSG. + */ + if (unlikely(opcode == CPL_FW4_MSG && + ((const struct cpl_fw4_msg *)rsp)->type == + FW_TYPE_RSSCPL)) { + rsp++; + opcode = ((const struct rss_header *)rsp)->opcode; + rsp++; + } + + if (unlikely(opcode != CPL_SGE_EGR_UPDATE)) { + pr_info("%s: unexpected FW4/CPL %#x on Rx queue\n", + __func__, opcode); + return; + } + + txq = &s->ethtxq[pi->first_qset + rspq->idx]; + + /* We've got the Hardware Consumer Index Update in the Egress Update + * message. If we're using the SGE Doorbell Queue Timer mechanism, + * these Egress Update messages will be our sole CIDX Updates we get + * since we don't want to chew up PCIe bandwidth for both Ingress + * Messages and Status Page writes. However, The code which manages + * reclaiming successfully DMA'ed TX Work Requests uses the CIDX value + * stored in the Status Page at the end of the TX Queue. It's easiest + * to simply copy the CIDX Update value from the Egress Update message + * to the Status Page. Also note that no Endian issues need to be + * considered here since both are Big Endian and we're just copying + * bytes consistently ... + */ + if (txq->dbqt) { + struct cpl_sge_egr_update *egr; + + egr = (struct cpl_sge_egr_update *)rsp; + WRITE_ONCE(txq->q.stat->cidx, egr->cidx); + } + + t4_sge_eth_txq_egress_update(adapter, txq, -1); +} + +/** * t4_ethrx_handler - process an ingress ethernet packet * @q: the response queue that received the packet * @rsp: the response queue descriptor holding the RX_PKT message @@ -2816,6 +2970,15 @@ int t4_ethrx_handler(struct sge_rspq *q, const __be64 *rsp, struct port_info *pi; int ret = 0; + /* If we're looking at TX Queue CIDX Update, handle that separately + * and return. + */ + if (unlikely((*(u8 *)rsp == CPL_FW4_MSG) || + (*(u8 *)rsp == CPL_SGE_EGR_UPDATE))) { + t4_tx_completion_handler(q, rsp, si); + return 0; + } + if (unlikely(*(u8 *)rsp == cpl_trace_pkt)) return handle_trace_pkt(q->adap, si); @@ -3289,10 +3452,10 @@ done: static void sge_tx_timer_cb(struct timer_list *t) { - unsigned long m; - unsigned int i, budget; struct adapter *adap = from_timer(adap, t, sge.tx_timer); struct sge *s = &adap->sge; + unsigned long m, period; + unsigned int i, budget; for (i = 0; i < BITS_TO_LONGS(s->egr_sz); i++) for (m = s->txq_maperr[i]; m; m &= m - 1) { @@ -3320,29 +3483,29 @@ static void sge_tx_timer_cb(struct timer_list *t) budget = MAX_TIMER_TX_RECLAIM; i = s->ethtxq_rover; do { - struct sge_eth_txq *q = &s->ethtxq[i]; - - if (q->q.in_use && - time_after_eq(jiffies, q->txq->trans_start + HZ / 100) && - __netif_tx_trylock(q->txq)) { - int avail = reclaimable(&q->q); - - if (avail) { - if (avail > budget) - avail = budget; - - free_tx_desc(adap, &q->q, avail, true); - q->q.in_use -= avail; - budget -= avail; - } - __netif_tx_unlock(q->txq); - } + budget -= t4_sge_eth_txq_egress_update(adap, &s->ethtxq[i], + budget); + if (!budget) + break; if (++i >= s->ethqsets) i = 0; - } while (budget && i != s->ethtxq_rover); + } while (i != s->ethtxq_rover); s->ethtxq_rover = i; - mod_timer(&s->tx_timer, jiffies + (budget ? TX_QCHECK_PERIOD : 2)); + + if (budget == 0) { + /* If we found too many reclaimable packets schedule a timer + * in the near future to continue where we left off. + */ + period = 2; + } else { + /* We reclaimed all reclaimable TX Descriptors, so reschedule + * at the normal period. + */ + period = TX_QCHECK_PERIOD; + } + + mod_timer(&s->tx_timer, jiffies + period); } /** @@ -3421,7 +3584,8 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq, : FW_IQ_IQTYPE_OFLD)); if (fl) { - enum chip_type chip = CHELSIO_CHIP_VERSION(adap->params.chip); + unsigned int chip_ver = + CHELSIO_CHIP_VERSION(adap->params.chip); /* Allocate the ring for the hardware free list (with space * for its status page) along with the associated software @@ -3459,10 +3623,10 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq, * the smaller 64-byte value there). */ c.fl0dcaen_to_fl0cidxfthresh = - htons(FW_IQ_CMD_FL0FBMIN_V(chip <= CHELSIO_T5 ? + htons(FW_IQ_CMD_FL0FBMIN_V(chip_ver <= CHELSIO_T5 ? FETCHBURSTMIN_128B_X : - FETCHBURSTMIN_64B_X) | - FW_IQ_CMD_FL0FBMAX_V((chip <= CHELSIO_T5) ? + FETCHBURSTMIN_64B_T6_X) | + FW_IQ_CMD_FL0FBMAX_V((chip_ver <= CHELSIO_T5) ? FETCHBURSTMAX_512B_X : FETCHBURSTMAX_256B_X)); c.fl0size = htons(flsz); @@ -3584,14 +3748,24 @@ static void init_txq(struct adapter *adap, struct sge_txq *q, unsigned int id) adap->sge.egr_map[id - adap->sge.egr_start] = q; } +/** + * t4_sge_alloc_eth_txq - allocate an Ethernet TX Queue + * @adap: the adapter + * @txq: the SGE Ethernet TX Queue to initialize + * @dev: the Linux Network Device + * @netdevq: the corresponding Linux TX Queue + * @iqid: the Ingress Queue to which to deliver CIDX Update messages + * @dbqt: whether this TX Queue will use the SGE Doorbell Queue Timers + */ int t4_sge_alloc_eth_txq(struct adapter *adap, struct sge_eth_txq *txq, struct net_device *dev, struct netdev_queue *netdevq, - unsigned int iqid) + unsigned int iqid, u8 dbqt) { - int ret, nentries; - struct fw_eq_eth_cmd c; - struct sge *s = &adap->sge; + unsigned int chip_ver = CHELSIO_CHIP_VERSION(adap->params.chip); struct port_info *pi = netdev_priv(dev); + struct sge *s = &adap->sge; + struct fw_eq_eth_cmd c; + int ret, nentries; /* Add status entries */ nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc); @@ -3610,19 +3784,47 @@ int t4_sge_alloc_eth_txq(struct adapter *adap, struct sge_eth_txq *txq, FW_EQ_ETH_CMD_VFN_V(0)); c.alloc_to_len16 = htonl(FW_EQ_ETH_CMD_ALLOC_F | FW_EQ_ETH_CMD_EQSTART_F | FW_LEN16(c)); - c.viid_pkd = htonl(FW_EQ_ETH_CMD_AUTOEQUEQE_F | - FW_EQ_ETH_CMD_VIID_V(pi->viid)); + + /* For TX Ethernet Queues using the SGE Doorbell Queue Timer + * mechanism, we use Ingress Queue messages for Hardware Consumer + * Index Updates on the TX Queue. Otherwise we have the Hardware + * write the CIDX Updates into the Status Page at the end of the + * TX Queue. + */ + c.autoequiqe_to_viid = htonl((dbqt + ? FW_EQ_ETH_CMD_AUTOEQUIQE_F + : FW_EQ_ETH_CMD_AUTOEQUEQE_F) | + FW_EQ_ETH_CMD_VIID_V(pi->viid)); + c.fetchszm_to_iqid = - htonl(FW_EQ_ETH_CMD_HOSTFCMODE_V(HOSTFCMODE_STATUS_PAGE_X) | + htonl(FW_EQ_ETH_CMD_HOSTFCMODE_V(dbqt + ? HOSTFCMODE_INGRESS_QUEUE_X + : HOSTFCMODE_STATUS_PAGE_X) | FW_EQ_ETH_CMD_PCIECHN_V(pi->tx_chan) | FW_EQ_ETH_CMD_FETCHRO_F | FW_EQ_ETH_CMD_IQID_V(iqid)); + + /* Note that the CIDX Flush Threshold should match MAX_TX_RECLAIM. */ c.dcaen_to_eqsize = - htonl(FW_EQ_ETH_CMD_FBMIN_V(FETCHBURSTMIN_64B_X) | + htonl(FW_EQ_ETH_CMD_FBMIN_V(chip_ver <= CHELSIO_T5 + ? FETCHBURSTMIN_64B_X + : FETCHBURSTMIN_64B_T6_X) | FW_EQ_ETH_CMD_FBMAX_V(FETCHBURSTMAX_512B_X) | FW_EQ_ETH_CMD_CIDXFTHRESH_V(CIDXFLUSHTHRESH_32_X) | FW_EQ_ETH_CMD_EQSIZE_V(nentries)); + c.eqaddr = cpu_to_be64(txq->q.phys_addr); + /* If we're using the SGE Doorbell Queue Timer mechanism, pass in the + * currently configured Timer Index. THis can be changed later via an + * ethtool -C tx-usecs {Timer Val} command. Note that the SGE + * Doorbell Queue mode is currently automatically enabled in the + * Firmware by setting either AUTOEQUEQE or AUTOEQUIQE ... + */ + if (dbqt) + c.timeren_timerix = + cpu_to_be32(FW_EQ_ETH_CMD_TIMEREN_F | + FW_EQ_ETH_CMD_TIMERIX_V(txq->dbqtimerix)); + ret = t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), &c); if (ret) { kfree(txq->q.sdesc); @@ -3639,6 +3841,8 @@ int t4_sge_alloc_eth_txq(struct adapter *adap, struct sge_eth_txq *txq, txq->txq = netdevq; txq->tso = txq->tx_cso = txq->vlan_ins = 0; txq->mapping_err = 0; + txq->dbqt = dbqt; + return 0; } @@ -3646,10 +3850,11 @@ int t4_sge_alloc_ctrl_txq(struct adapter *adap, struct sge_ctrl_txq *txq, struct net_device *dev, unsigned int iqid, unsigned int cmplqid) { - int ret, nentries; - struct fw_eq_ctrl_cmd c; - struct sge *s = &adap->sge; + unsigned int chip_ver = CHELSIO_CHIP_VERSION(adap->params.chip); struct port_info *pi = netdev_priv(dev); + struct sge *s = &adap->sge; + struct fw_eq_ctrl_cmd c; + int ret, nentries; /* Add status entries */ nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc); @@ -3673,7 +3878,9 @@ int t4_sge_alloc_ctrl_txq(struct adapter *adap, struct sge_ctrl_txq *txq, FW_EQ_CTRL_CMD_PCIECHN_V(pi->tx_chan) | FW_EQ_CTRL_CMD_FETCHRO_F | FW_EQ_CTRL_CMD_IQID_V(iqid)); c.dcaen_to_eqsize = - htonl(FW_EQ_CTRL_CMD_FBMIN_V(FETCHBURSTMIN_64B_X) | + htonl(FW_EQ_CTRL_CMD_FBMIN_V(chip_ver <= CHELSIO_T5 + ? FETCHBURSTMIN_64B_X + : FETCHBURSTMIN_64B_T6_X) | FW_EQ_CTRL_CMD_FBMAX_V(FETCHBURSTMAX_512B_X) | FW_EQ_CTRL_CMD_CIDXFTHRESH_V(CIDXFLUSHTHRESH_32_X) | FW_EQ_CTRL_CMD_EQSIZE_V(nentries)); @@ -3713,6 +3920,7 @@ int t4_sge_alloc_uld_txq(struct adapter *adap, struct sge_uld_txq *txq, struct net_device *dev, unsigned int iqid, unsigned int uld_type) { + unsigned int chip_ver = CHELSIO_CHIP_VERSION(adap->params.chip); int ret, nentries; struct fw_eq_ofld_cmd c; struct sge *s = &adap->sge; @@ -3743,7 +3951,9 @@ int t4_sge_alloc_uld_txq(struct adapter *adap, struct sge_uld_txq *txq, FW_EQ_OFLD_CMD_PCIECHN_V(pi->tx_chan) | FW_EQ_OFLD_CMD_FETCHRO_F | FW_EQ_OFLD_CMD_IQID_V(iqid)); c.dcaen_to_eqsize = - htonl(FW_EQ_OFLD_CMD_FBMIN_V(FETCHBURSTMIN_64B_X) | + htonl(FW_EQ_OFLD_CMD_FBMIN_V(chip_ver <= CHELSIO_T5 + ? FETCHBURSTMIN_64B_X + : FETCHBURSTMIN_64B_T6_X) | FW_EQ_OFLD_CMD_FBMAX_V(FETCHBURSTMAX_512B_X) | FW_EQ_OFLD_CMD_CIDXFTHRESH_V(CIDXFLUSHTHRESH_32_X) | FW_EQ_OFLD_CMD_EQSIZE_V(nentries)); diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index c5e5466ee38b..27af347be4af 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -6713,6 +6713,47 @@ int t4_sge_ctxt_flush(struct adapter *adap, unsigned int mbox, int ctxt_type) } /** + * t4_read_sge_dbqtimers - reag SGE Doorbell Queue Timer values + * @adap - the adapter + * @ndbqtimers: size of the provided SGE Doorbell Queue Timer table + * @dbqtimers: SGE Doorbell Queue Timer table + * + * Reads the SGE Doorbell Queue Timer values into the provided table. + * Returns 0 on success (Firmware and Hardware support this feature), + * an error on failure. + */ +int t4_read_sge_dbqtimers(struct adapter *adap, unsigned int ndbqtimers, + u16 *dbqtimers) +{ + int ret, dbqtimerix; + + ret = 0; + dbqtimerix = 0; + while (dbqtimerix < ndbqtimers) { + int nparams, param; + u32 params[7], vals[7]; + + nparams = ndbqtimers - dbqtimerix; + if (nparams > ARRAY_SIZE(params)) + nparams = ARRAY_SIZE(params); + + for (param = 0; param < nparams; param++) + params[param] = + (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_DBQ_TIMER) | + FW_PARAMS_PARAM_Y_V(dbqtimerix + param)); + ret = t4_query_params(adap, adap->mbox, adap->pf, 0, + nparams, params, vals); + if (ret) + break; + + for (param = 0; param < nparams; param++) + dbqtimers[dbqtimerix++] = vals[param]; + } + return ret; +} + +/** * t4_fw_hello - establish communication with FW * @adap: the adapter * @mbox: mailbox to use for the FW command diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h index 361d5032c288..002fc62ea726 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h @@ -91,6 +91,7 @@ enum { SGE_CTXT_SIZE = 24, /* size of SGE context */ SGE_NTIMERS = 6, /* # of interrupt holdoff timer values */ SGE_NCOUNTERS = 4, /* # of interrupt packet counter values */ + SGE_NDBQTIMERS = 8, /* # of Doorbell Queue Timer values */ SGE_MAX_IQ_SIZE = 65520, SGE_TIMER_RSTRT_CNTR = 6, /* restart RX packet threshold counter */ diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_values.h b/drivers/net/ethernet/chelsio/cxgb4/t4_values.h index f6558cbfc54e..eb1aa82149db 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_values.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_values.h @@ -71,12 +71,18 @@ #define FETCHBURSTMIN_64B_X 2 #define FETCHBURSTMIN_128B_X 3 +/* T6 and later use a single-bit encoding for FetchBurstMin */ +#define FETCHBURSTMIN_64B_T6_X 0 +#define FETCHBURSTMIN_128B_T6_X 1 + #define FETCHBURSTMAX_256B_X 2 #define FETCHBURSTMAX_512B_X 3 +#define HOSTFCMODE_INGRESS_QUEUE_X 1 #define HOSTFCMODE_STATUS_PAGE_X 2 #define CIDXFLUSHTHRESH_32_X 5 +#define CIDXFLUSHTHRESH_128_X 7 #define UPDATEDELIVERY_INTERRUPT_X 1 diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h index 1d9b3e1e5f94..631f1663f4e0 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h @@ -1254,6 +1254,8 @@ enum fw_params_param_dev { FW_PARAMS_PARAM_DEV_RDMA_WRITE_WITH_IMM = 0x21, FW_PARAMS_PARAM_DEV_RI_WRITE_CMPL_WR = 0x24, FW_PARAMS_PARAM_DEV_OPAQUE_VIID_SMT_EXTN = 0x27, + FW_PARAMS_PARAM_DEV_DBQ_TIMER = 0x29, + FW_PARAMS_PARAM_DEV_DBQ_TIMERTICK = 0x2A, }; /* @@ -1322,6 +1324,7 @@ enum fw_params_param_dmaq { FW_PARAMS_PARAM_DMAQ_EQ_CMPLIQID_CTRL = 0x11, FW_PARAMS_PARAM_DMAQ_EQ_SCHEDCLASS_ETH = 0x12, FW_PARAMS_PARAM_DMAQ_EQ_DCBPRIO_ETH = 0x13, + FW_PARAMS_PARAM_DMAQ_EQ_TIMERIX = 0x15, FW_PARAMS_PARAM_DMAQ_CONM_CTXT = 0x20, }; @@ -1751,8 +1754,8 @@ struct fw_eq_eth_cmd { __be32 fetchszm_to_iqid; __be32 dcaen_to_eqsize; __be64 eqaddr; - __be32 viid_pkd; - __be32 r8_lo; + __be32 autoequiqe_to_viid; + __be32 timeren_timerix; __be64 r9; }; @@ -1847,6 +1850,10 @@ struct fw_eq_eth_cmd { #define FW_EQ_ETH_CMD_EQSIZE_S 0 #define FW_EQ_ETH_CMD_EQSIZE_V(x) ((x) << FW_EQ_ETH_CMD_EQSIZE_S) +#define FW_EQ_ETH_CMD_AUTOEQUIQE_S 31 +#define FW_EQ_ETH_CMD_AUTOEQUIQE_V(x) ((x) << FW_EQ_ETH_CMD_AUTOEQUIQE_S) +#define FW_EQ_ETH_CMD_AUTOEQUIQE_F FW_EQ_ETH_CMD_AUTOEQUIQE_V(1U) + #define FW_EQ_ETH_CMD_AUTOEQUEQE_S 30 #define FW_EQ_ETH_CMD_AUTOEQUEQE_V(x) ((x) << FW_EQ_ETH_CMD_AUTOEQUEQE_S) #define FW_EQ_ETH_CMD_AUTOEQUEQE_F FW_EQ_ETH_CMD_AUTOEQUEQE_V(1U) @@ -1854,6 +1861,19 @@ struct fw_eq_eth_cmd { #define FW_EQ_ETH_CMD_VIID_S 16 #define FW_EQ_ETH_CMD_VIID_V(x) ((x) << FW_EQ_ETH_CMD_VIID_S) +#define FW_EQ_ETH_CMD_TIMEREN_S 3 +#define FW_EQ_ETH_CMD_TIMEREN_M 0x1 +#define FW_EQ_ETH_CMD_TIMEREN_V(x) ((x) << FW_EQ_ETH_CMD_TIMEREN_S) +#define FW_EQ_ETH_CMD_TIMEREN_G(x) \ + (((x) >> FW_EQ_ETH_CMD_TIMEREN_S) & FW_EQ_ETH_CMD_TIMEREN_M) +#define FW_EQ_ETH_CMD_TIMEREN_F FW_EQ_ETH_CMD_TIMEREN_V(1U) + +#define FW_EQ_ETH_CMD_TIMERIX_S 0 +#define FW_EQ_ETH_CMD_TIMERIX_M 0x7 +#define FW_EQ_ETH_CMD_TIMERIX_V(x) ((x) << FW_EQ_ETH_CMD_TIMERIX_S) +#define FW_EQ_ETH_CMD_TIMERIX_G(x) \ + (((x) >> FW_EQ_ETH_CMD_TIMERIX_S) & FW_EQ_ETH_CMD_TIMERIX_M) + struct fw_eq_ctrl_cmd { __be32 op_to_vfn; __be32 alloc_to_len16; diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c index 1d534f0baa69..11d2ba0a2bf5 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c @@ -2268,7 +2268,7 @@ int t4vf_sge_alloc_rxq(struct adapter *adapter, struct sge_rspq *rspq, cmd.iqaddr = cpu_to_be64(rspq->phys_addr); if (fl) { - enum chip_type chip = + unsigned int chip_ver = CHELSIO_CHIP_VERSION(adapter->params.chip); /* * Allocate the ring for the hardware free list (with space @@ -2319,10 +2319,10 @@ int t4vf_sge_alloc_rxq(struct adapter *adapter, struct sge_rspq *rspq, */ cmd.fl0dcaen_to_fl0cidxfthresh = cpu_to_be16( - FW_IQ_CMD_FL0FBMIN_V(chip <= CHELSIO_T5 ? - FETCHBURSTMIN_128B_X : - FETCHBURSTMIN_64B_X) | - FW_IQ_CMD_FL0FBMAX_V((chip <= CHELSIO_T5) ? + FW_IQ_CMD_FL0FBMIN_V(chip_ver <= CHELSIO_T5 + ? FETCHBURSTMIN_128B_X + : FETCHBURSTMIN_64B_T6_X) | + FW_IQ_CMD_FL0FBMAX_V((chip_ver <= CHELSIO_T5) ? FETCHBURSTMAX_512B_X : FETCHBURSTMAX_256B_X)); cmd.fl0size = cpu_to_be16(flsz); @@ -2411,10 +2411,11 @@ int t4vf_sge_alloc_eth_txq(struct adapter *adapter, struct sge_eth_txq *txq, struct net_device *dev, struct netdev_queue *devq, unsigned int iqid) { + unsigned int chip_ver = CHELSIO_CHIP_VERSION(adapter->params.chip); + struct port_info *pi = netdev_priv(dev); + struct fw_eq_eth_cmd cmd, rpl; struct sge *s = &adapter->sge; int ret, nentries; - struct fw_eq_eth_cmd cmd, rpl; - struct port_info *pi = netdev_priv(dev); /* * Calculate the size of the hardware TX Queue (including the Status @@ -2448,17 +2449,19 @@ int t4vf_sge_alloc_eth_txq(struct adapter *adapter, struct sge_eth_txq *txq, cmd.alloc_to_len16 = cpu_to_be32(FW_EQ_ETH_CMD_ALLOC_F | FW_EQ_ETH_CMD_EQSTART_F | FW_LEN16(cmd)); - cmd.viid_pkd = cpu_to_be32(FW_EQ_ETH_CMD_AUTOEQUEQE_F | - FW_EQ_ETH_CMD_VIID_V(pi->viid)); + cmd.autoequiqe_to_viid = cpu_to_be32(FW_EQ_ETH_CMD_AUTOEQUEQE_F | + FW_EQ_ETH_CMD_VIID_V(pi->viid)); cmd.fetchszm_to_iqid = cpu_to_be32(FW_EQ_ETH_CMD_HOSTFCMODE_V(SGE_HOSTFCMODE_STPG) | FW_EQ_ETH_CMD_PCIECHN_V(pi->port_id) | FW_EQ_ETH_CMD_IQID_V(iqid)); cmd.dcaen_to_eqsize = - cpu_to_be32(FW_EQ_ETH_CMD_FBMIN_V(SGE_FETCHBURSTMIN_64B) | - FW_EQ_ETH_CMD_FBMAX_V(SGE_FETCHBURSTMAX_512B) | + cpu_to_be32(FW_EQ_ETH_CMD_FBMIN_V(chip_ver <= CHELSIO_T5 + ? FETCHBURSTMIN_64B_X + : FETCHBURSTMIN_64B_T6_X) | + FW_EQ_ETH_CMD_FBMAX_V(FETCHBURSTMAX_512B_X) | FW_EQ_ETH_CMD_CIDXFTHRESH_V( - SGE_CIDXFLUSHTHRESH_32) | + CIDXFLUSHTHRESH_32_X) | FW_EQ_ETH_CMD_EQSIZE_V(nentries)); cmd.eqaddr = cpu_to_be64(txq->q.phys_addr); |