diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-cards.c | 24 |
1 files changed, 13 insertions, 11 deletions
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 11ce63578e9b..c427c0eeba1d 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1403,6 +1403,17 @@ EXPORT_SYMBOL_GPL(em28xx_tuner_callback); static void inline em28xx_set_model(struct em28xx *dev) { memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board)); + + /* Those are the default values for the majority of boards + Use those values if not specified otherwise at boards entry + */ + if (!dev->board.xclk) + dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE | + EM28XX_XCLK_FREQUENCY_12MHZ; + + if (!dev->board.i2c_speed) + dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_100_KHZ; } /* Since em28xx_pre_card_setup() requires a proper dev->model, @@ -1464,17 +1475,8 @@ void em28xx_pre_card_setup(struct em28xx *dev) if (rc >= 0) dev->reg_gpo = rc; - /* Those are the default values for the majority of boards - Use those values if not specified otherwise at boards entry - */ - if (!dev->board.xclk) - dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE | - EM28XX_XCLK_FREQUENCY_12MHZ; - - if (!dev->board.i2c_speed) - dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | - EM28XX_I2C_FREQ_100_KHZ; - + /* Set the initial XCLK and I2C clock values based on the board + definition */ em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f); em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); msleep(50); |