diff options
| -rw-r--r-- | drivers/usb/core/buffer.c | 10 | ||||
| -rw-r--r-- | drivers/usb/core/hcd.c | 4 | ||||
| -rw-r--r-- | drivers/usb/dwc2/hcd.c | 2 | ||||
| -rw-r--r-- | include/linux/usb.h | 2 | ||||
| -rw-r--r-- | include/linux/usb/hcd.h | 3 |
5 files changed, 10 insertions, 11 deletions
diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index 1a5b3dcae930..6cf22c27f2d2 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -66,9 +66,7 @@ int hcd_buffer_create(struct usb_hcd *hcd) char name[16]; int i, size; - if (hcd->localmem_pool || - !IS_ENABLED(CONFIG_HAS_DMA) || - !is_device_dma_capable(hcd->self.sysdev)) + if (hcd->localmem_pool || !hcd_uses_dma(hcd)) return 0; for (i = 0; i < HCD_BUFFER_POOLS; i++) { @@ -129,8 +127,7 @@ void *hcd_buffer_alloc( return gen_pool_dma_alloc(hcd->localmem_pool, size, dma); /* some USB hosts just use PIO */ - if (!IS_ENABLED(CONFIG_HAS_DMA) || - !is_device_dma_capable(bus->sysdev)) { + if (!hcd_uses_dma(hcd)) { *dma = ~(dma_addr_t) 0; return kmalloc(size, mem_flags); } @@ -160,8 +157,7 @@ void hcd_buffer_free( return; } - if (!IS_ENABLED(CONFIG_HAS_DMA) || - !is_device_dma_capable(bus->sysdev)) { + if (!hcd_uses_dma(hcd)) { kfree(addr); return; } diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 2ccbc2f83570..8592c0344fe8 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1412,7 +1412,7 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, if (usb_endpoint_xfer_control(&urb->ep->desc)) { if (hcd->self.uses_pio_for_control) return ret; - if (IS_ENABLED(CONFIG_HAS_DMA) && hcd->self.uses_dma) { + if (hcd_uses_dma(hcd)) { if (is_vmalloc_addr(urb->setup_packet)) { WARN_ONCE(1, "setup packet is not dma capable\n"); return -EAGAIN; @@ -1446,7 +1446,7 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; if (urb->transfer_buffer_length != 0 && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) { - if (IS_ENABLED(CONFIG_HAS_DMA) && hcd->self.uses_dma) { + if (hcd_uses_dma(hcd)) { if (urb->num_sgs) { int n; diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index ee144ff8af5b..111787a137ee 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -4608,7 +4608,7 @@ static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, buf = urb->transfer_buffer; - if (hcd->self.uses_dma) { + if (hcd_uses_dma(hcd)) { if (!buf && (urb->transfer_dma & 3)) { dev_err(hsotg->dev, "%s: unaligned transfer with no transfer_buffer", diff --git a/include/linux/usb.h b/include/linux/usb.h index 83d35d993e8c..e87826e23d59 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1457,7 +1457,7 @@ typedef void (*usb_complete_t)(struct urb *); * field rather than determining a dma address themselves. * * Note that transfer_buffer must still be set if the controller - * does not support DMA (as indicated by bus.uses_dma) and when talking + * does not support DMA (as indicated by hcd_uses_dma()) and when talking * to root hub. If you have to trasfer between highmem zone and the device * on such controller, create a bounce buffer or bail out with an error. * If transfer_buffer cannot be set (is in highmem) and the controller is DMA diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index bab27ccc8ff5..a20e7815d814 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -422,6 +422,9 @@ static inline bool hcd_periodic_completion_in_progress(struct usb_hcd *hcd, return hcd->high_prio_bh.completing_ep == ep; } +#define hcd_uses_dma(hcd) \ + (IS_ENABLED(CONFIG_HAS_DMA) && (hcd)->self.uses_dma) + extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb); extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb, int status); |