aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen61
-rw-r--r--Documentation/arm/Sharp-LH/LCDPanels59
-rw-r--r--Documentation/feature-removal-schedule.txt9
-rw-r--r--Documentation/infiniband/ipoib.txt12
-rw-r--r--Documentation/kernel-parameters.txt9
-rw-r--r--Documentation/networking/README.ipw220010
-rw-r--r--Documentation/networking/bonding.txt323
-rw-r--r--Documentation/networking/ip-sysctl.txt7
-rw-r--r--Documentation/networking/netdevices.txt8
-rw-r--r--MAINTAINERS8
-rw-r--r--arch/arm/Kconfig5
-rw-r--r--arch/arm/Makefile1
-rw-r--r--arch/arm/boot/compressed/head.S4
-rw-r--r--arch/arm/configs/lpd7a400_defconfig135
-rw-r--r--arch/arm/configs/lpd7a404_defconfig430
-rw-r--r--arch/arm/configs/pnx4008_defconfig2072
-rw-r--r--arch/arm/kernel/entry-common.S2
-rw-r--r--arch/arm/kernel/irq.c4
-rw-r--r--arch/arm/kernel/time.c24
-rw-r--r--arch/arm/mach-lh7a40x/Kconfig5
-rw-r--r--arch/arm/mach-lh7a40x/Makefile19
-rw-r--r--arch/arm/mach-lh7a40x/arch-lpd7a40x.c200
-rw-r--r--arch/arm/mach-lh7a40x/clcd.c241
-rw-r--r--arch/arm/mach-lh7a40x/clocks.c199
-rw-r--r--arch/arm/mach-lh7a40x/common.h1
-rw-r--r--arch/arm/mach-lh7a40x/irq-lh7a404.c17
-rw-r--r--arch/arm/mach-lh7a40x/lcd-panel.h346
-rw-r--r--arch/arm/mach-lh7a40x/ssp-cpld.c343
-rw-r--r--arch/arm/mach-lh7a40x/time.c4
-rw-r--r--arch/arm/mach-pnx4008/Makefile12
-rw-r--r--arch/arm/mach-pnx4008/Makefile.boot4
-rw-r--r--arch/arm/mach-pnx4008/clock.c1010
-rw-r--r--arch/arm/mach-pnx4008/clock.h43
-rw-r--r--arch/arm/mach-pnx4008/core.c207
-rw-r--r--arch/arm/mach-pnx4008/dma.c1109
-rw-r--r--arch/arm/mach-pnx4008/gpio.c330
-rw-r--r--arch/arm/mach-pnx4008/irq.c121
-rw-r--r--arch/arm/mach-pnx4008/pm.c184
-rw-r--r--arch/arm/mach-pnx4008/serial.c69
-rw-r--r--arch/arm/mach-pnx4008/sleep.S196
-rw-r--r--arch/arm/mach-pnx4008/time.c141
-rw-r--r--arch/arm/mach-pxa/lubbock.c84
-rw-r--r--arch/arm/mach-s3c2410/Kconfig26
-rw-r--r--arch/arm/mach-s3c2410/Makefile10
-rw-r--r--arch/arm/mach-s3c2410/clock.c2
-rw-r--r--arch/arm/mach-s3c2410/common-smdk.c65
-rw-r--r--arch/arm/mach-s3c2410/cpu.c77
-rw-r--r--arch/arm/mach-s3c2410/cpu.h7
-rw-r--r--arch/arm/mach-s3c2410/devs.c78
-rw-r--r--arch/arm/mach-s3c2410/devs.h8
-rw-r--r--arch/arm/mach-s3c2410/mach-anubis.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-h1940.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-nexcoder.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-osiris.c5
-rw-r--r--arch/arm/mach-s3c2410/mach-otom.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-smdk2410.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-smdk2440.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-vr1000.c2
-rw-r--r--arch/arm/mach-s3c2410/pm.c4
-rw-r--r--arch/arm/mach-s3c2410/s3c2410.c85
-rw-r--r--arch/arm/mach-s3c2410/s3c2440-irq.c77
-rw-r--r--arch/arm/mach-s3c2410/s3c2440.c234
-rw-r--r--arch/arm/mach-s3c2410/s3c2442-clock.c171
-rw-r--r--arch/arm/mach-s3c2410/s3c2442.c52
-rw-r--r--arch/arm/mach-s3c2410/s3c2442.h17
-rw-r--r--arch/arm/mach-s3c2410/s3c244x-irq.c142
-rw-r--r--arch/arm/mach-s3c2410/s3c244x.c182
-rw-r--r--arch/arm/mach-s3c2410/s3c244x.h25
-rw-r--r--arch/arm/mach-s3c2410/sleep.S2
-rw-r--r--arch/arm/mm/Kconfig4
-rw-r--r--arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c20
-rw-r--r--arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c11
-rw-r--r--arch/i386/kernel/cpu/cpufreq/longhaul.c20
-rw-r--r--arch/i386/kernel/cpu/cpufreq/longrun.c1
-rw-r--r--arch/i386/kernel/cpu/cpufreq/powernow-k7.c13
-rw-r--r--arch/i386/kernel/cpu/cpufreq/powernow-k8.c344
-rw-r--r--arch/i386/kernel/cpu/cpufreq/powernow-k8.h40
-rw-r--r--arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c12
-rw-r--r--arch/mips/Kconfig244
-rw-r--r--arch/mips/Makefile37
-rw-r--r--arch/mips/au1000/common/au1xxx_irqmap.c4
-rw-r--r--arch/mips/au1000/common/pci.c16
-rw-r--r--arch/mips/au1000/common/setup.c6
-rw-r--r--arch/mips/au1000/common/time.c9
-rw-r--r--arch/mips/au1000/csb250/irqmap.c4
-rw-r--r--arch/mips/au1000/db1x00/irqmap.c4
-rw-r--r--arch/mips/au1000/hydrogen3/irqmap.c4
-rw-r--r--arch/mips/au1000/mtx-1/irqmap.c4
-rw-r--r--arch/mips/au1000/pb1000/irqmap.c4
-rw-r--r--arch/mips/au1000/pb1100/irqmap.c4
-rw-r--r--arch/mips/au1000/pb1200/irqmap.c4
-rw-r--r--arch/mips/au1000/pb1500/irqmap.c4
-rw-r--r--arch/mips/au1000/pb1550/irqmap.c4
-rw-r--r--arch/mips/au1000/xxs1500/irqmap.c4
-rw-r--r--arch/mips/basler/excite/Makefile9
-rw-r--r--arch/mips/basler/excite/excite_dbg_io.c122
-rw-r--r--arch/mips/basler/excite/excite_device.c404
-rw-r--r--arch/mips/basler/excite/excite_flashtest.c294
-rw-r--r--arch/mips/basler/excite/excite_fpga.h80
-rw-r--r--arch/mips/basler/excite/excite_iodev.c183
-rw-r--r--arch/mips/basler/excite/excite_iodev.h10
-rw-r--r--arch/mips/basler/excite/excite_irq.c129
-rw-r--r--arch/mips/basler/excite/excite_procfs.c81
-rw-r--r--arch/mips/basler/excite/excite_prom.c148
-rw-r--r--arch/mips/basler/excite/excite_setup.c307
-rw-r--r--arch/mips/cobalt/console.c5
-rw-r--r--arch/mips/cobalt/setup.c43
-rw-r--r--arch/mips/configs/atlas_defconfig11
-rw-r--r--arch/mips/configs/bigsur_defconfig11
-rw-r--r--arch/mips/configs/capcella_defconfig11
-rw-r--r--arch/mips/configs/cobalt_defconfig11
-rw-r--r--arch/mips/configs/db1000_defconfig11
-rw-r--r--arch/mips/configs/db1100_defconfig11
-rw-r--r--arch/mips/configs/db1200_defconfig11
-rw-r--r--arch/mips/configs/db1500_defconfig11
-rw-r--r--arch/mips/configs/db1550_defconfig11
-rw-r--r--arch/mips/configs/ddb5477_defconfig11
-rw-r--r--arch/mips/configs/decstation_defconfig13
-rw-r--r--arch/mips/configs/e55_defconfig11
-rw-r--r--arch/mips/configs/emma2rh_defconfig1207
-rw-r--r--arch/mips/configs/ev64120_defconfig11
-rw-r--r--arch/mips/configs/ev96100_defconfig11
-rw-r--r--arch/mips/configs/excite_defconfig1220
-rw-r--r--arch/mips/configs/ip22_defconfig11
-rw-r--r--arch/mips/configs/ip27_defconfig13
-rw-r--r--arch/mips/configs/ip32_defconfig11
-rw-r--r--arch/mips/configs/it8172_defconfig11
-rw-r--r--arch/mips/configs/ivr_defconfig11
-rw-r--r--arch/mips/configs/jaguar-atx_defconfig11
-rw-r--r--arch/mips/configs/jmr3927_defconfig11
-rw-r--r--arch/mips/configs/lasat200_defconfig11
-rw-r--r--arch/mips/configs/malta_defconfig11
-rw-r--r--arch/mips/configs/mipssim_defconfig11
-rw-r--r--arch/mips/configs/mpc30x_defconfig11
-rw-r--r--arch/mips/configs/ocelot_3_defconfig11
-rw-r--r--arch/mips/configs/ocelot_c_defconfig11
-rw-r--r--arch/mips/configs/ocelot_defconfig11
-rw-r--r--arch/mips/configs/ocelot_g_defconfig11
-rw-r--r--arch/mips/configs/pb1100_defconfig11
-rw-r--r--arch/mips/configs/pb1500_defconfig11
-rw-r--r--arch/mips/configs/pb1550_defconfig11
-rw-r--r--arch/mips/configs/pnx8550-jbs_defconfig11
-rw-r--r--arch/mips/configs/pnx8550-v2pci_defconfig11
-rw-r--r--arch/mips/configs/qemu_defconfig11
-rw-r--r--arch/mips/configs/rbhma4500_defconfig11
-rw-r--r--arch/mips/configs/rm200_defconfig11
-rw-r--r--arch/mips/configs/sb1250-swarm_defconfig11
-rw-r--r--arch/mips/configs/sead_defconfig11
-rw-r--r--arch/mips/configs/tb0226_defconfig11
-rw-r--r--arch/mips/configs/tb0229_defconfig11
-rw-r--r--arch/mips/configs/tb0287_defconfig11
-rw-r--r--arch/mips/configs/workpad_defconfig11
-rw-r--r--arch/mips/configs/wrppmc_defconfig (renamed from arch/mips/configs/ddb5476_defconfig)359
-rw-r--r--arch/mips/configs/yosemite_defconfig11
-rw-r--r--arch/mips/ddb5xxx/common/prom.c8
-rw-r--r--arch/mips/ddb5xxx/ddb5074/Makefile8
-rw-r--r--arch/mips/ddb5xxx/ddb5074/irq.c169
-rw-r--r--arch/mips/ddb5xxx/ddb5074/nile4_pic.c286
-rw-r--r--arch/mips/ddb5xxx/ddb5074/setup.c234
-rw-r--r--arch/mips/ddb5xxx/ddb5476/Makefile9
-rw-r--r--arch/mips/ddb5xxx/ddb5476/dbg_io.c136
-rw-r--r--arch/mips/ddb5xxx/ddb5476/irq.c165
-rw-r--r--arch/mips/ddb5xxx/ddb5476/nile4_pic.c190
-rw-r--r--arch/mips/ddb5xxx/ddb5476/setup.c296
-rw-r--r--arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c109
-rw-r--r--arch/mips/ddb5xxx/ddb5477/setup.c2
-rw-r--r--arch/mips/dec/setup.c2
-rw-r--r--arch/mips/dec/time.c2
-rw-r--r--arch/mips/defconfig11
-rw-r--r--arch/mips/emma2rh/common/Makefile13
-rw-r--r--arch/mips/emma2rh/common/irq.c108
-rw-r--r--arch/mips/emma2rh/common/irq_emma2rh.c134
-rw-r--r--arch/mips/emma2rh/common/prom.c77
-rw-r--r--arch/mips/emma2rh/markeins/Makefile13
-rw-r--r--arch/mips/emma2rh/markeins/irq.c134
-rw-r--r--arch/mips/emma2rh/markeins/irq_markeins.c197
-rw-r--r--arch/mips/emma2rh/markeins/led.c60
-rw-r--r--arch/mips/emma2rh/markeins/platform.c170
-rw-r--r--arch/mips/emma2rh/markeins/setup.c182
-rw-r--r--arch/mips/galileo-boards/ev96100/setup.c2
-rw-r--r--arch/mips/gt64120/ev64120/setup.c2
-rw-r--r--arch/mips/gt64120/momenco_ocelot/setup.c2
-rw-r--r--arch/mips/gt64120/wrppmc/Makefile14
-rw-r--r--arch/mips/gt64120/wrppmc/int-handler.S59
-rw-r--r--arch/mips/gt64120/wrppmc/irq.c63
-rw-r--r--arch/mips/gt64120/wrppmc/pci.c53
-rw-r--r--arch/mips/gt64120/wrppmc/reset.c50
-rw-r--r--arch/mips/gt64120/wrppmc/setup.c173
-rw-r--r--arch/mips/gt64120/wrppmc/time.c57
-rw-r--r--arch/mips/ite-boards/generic/it8172_setup.c76
-rw-r--r--arch/mips/jazz/setup.c2
-rw-r--r--arch/mips/jmr3927/rbhma3100/setup.c61
-rw-r--r--arch/mips/kernel/Makefile2
-rw-r--r--arch/mips/kernel/apm.c605
-rw-r--r--arch/mips/kernel/asm-offsets.c66
-rw-r--r--arch/mips/kernel/branch.c2
-rw-r--r--arch/mips/kernel/i8259.c4
-rw-r--r--arch/mips/kernel/irixsig.c2
-rw-r--r--arch/mips/kernel/ptrace.c26
-rw-r--r--arch/mips/kernel/ptrace32.c16
-rw-r--r--arch/mips/kernel/r4k_switch.S13
-rw-r--r--arch/mips/kernel/setup.c56
-rw-r--r--arch/mips/kernel/traps.c9
-rw-r--r--arch/mips/lasat/setup.c2
-rw-r--r--arch/mips/lib/Makefile3
-rw-r--r--arch/mips/lib/ashldi3.c29
-rw-r--r--arch/mips/lib/ashrdi3.c31
-rw-r--r--arch/mips/lib/libgcc.h26
-rw-r--r--arch/mips/lib/lshrdi3.c29
-rw-r--r--arch/mips/math-emu/cp1emu.c15
-rw-r--r--arch/mips/math-emu/ieee754.h2
-rw-r--r--arch/mips/math-emu/kernel_linkage.c24
-rw-r--r--arch/mips/mips-boards/atlas/atlas_setup.c2
-rw-r--r--arch/mips/mips-boards/generic/memory.c9
-rw-r--r--arch/mips/mips-boards/malta/malta_setup.c12
-rw-r--r--arch/mips/mips-boards/malta/malta_smp.c19
-rw-r--r--arch/mips/mips-boards/sead/sead_setup.c2
-rw-r--r--arch/mips/mips-boards/sim/sim_setup.c2
-rw-r--r--arch/mips/mips-boards/sim/sim_smp.c21
-rw-r--r--arch/mips/mm/tlb-r4k.c1
-rw-r--r--arch/mips/momentum/jaguar_atx/setup.c2
-rw-r--r--arch/mips/momentum/ocelot_3/setup.c2
-rw-r--r--arch/mips/momentum/ocelot_c/setup.c2
-rw-r--r--arch/mips/momentum/ocelot_g/setup.c2
-rw-r--r--arch/mips/pci/Makefile7
-rw-r--r--arch/mips/pci/fixup-ddb5074.c21
-rw-r--r--arch/mips/pci/fixup-emma2rh.c102
-rw-r--r--arch/mips/pci/fixup-excite.c36
-rw-r--r--arch/mips/pci/fixup-wrppmc.c37
-rw-r--r--arch/mips/pci/ops-bridge.c306
-rw-r--r--arch/mips/pci/ops-ddb5074.c271
-rw-r--r--arch/mips/pci/ops-ddb5476.c286
-rw-r--r--arch/mips/pci/ops-emma2rh.c186
-rw-r--r--arch/mips/pci/ops-it8172.c34
-rw-r--r--arch/mips/pci/ops-sni.c12
-rw-r--r--arch/mips/pci/ops-titan.c25
-rw-r--r--arch/mips/pci/pci-ddb5074.c79
-rw-r--r--arch/mips/pci/pci-ddb5476.c93
-rw-r--r--arch/mips/pci/pci-ddb5477.c32
-rw-r--r--arch/mips/pci/pci-emma2rh.c90
-rw-r--r--arch/mips/pci/pci-excite.c149
-rw-r--r--arch/mips/pci/pci-ip27.c295
-rw-r--r--arch/mips/pci/pci-jmr3927.c16
-rw-r--r--arch/mips/pci/pci-ocelot.c8
-rw-r--r--arch/mips/pci/pci-yosemite.c10
-rw-r--r--arch/mips/pci/pci.c5
-rw-r--r--arch/mips/philips/pnx8550/common/pci.c16
-rw-r--r--arch/mips/philips/pnx8550/common/setup.c27
-rw-r--r--arch/mips/pmc-sierra/yosemite/setup.c2
-rw-r--r--arch/mips/qemu/Makefile2
-rw-r--r--arch/mips/qemu/q-reset.c34
-rw-r--r--arch/mips/qemu/q-setup.c6
-rw-r--r--arch/mips/sgi-ip22/ip22-setup.c2
-rw-r--r--arch/mips/sgi-ip27/Kconfig38
-rw-r--r--arch/mips/sgi-ip27/ip27-init.c4
-rw-r--r--arch/mips/sgi-ip27/ip27-irq.c2
-rw-r--r--arch/mips/sgi-ip27/ip27-timer.c61
-rw-r--r--arch/mips/sgi-ip32/ip32-setup.c2
-rw-r--r--arch/mips/sibyte/bcm1480/time.c17
-rw-r--r--arch/mips/sibyte/sb1250/irq.c8
-rw-r--r--arch/mips/sibyte/swarm/setup.c4
-rw-r--r--arch/mips/sni/Makefile1
-rw-r--r--arch/mips/sni/setup.c135
-rw-r--r--arch/mips/sni/sniprom.c158
-rw-r--r--arch/mips/tx4927/common/tx4927_setup.c2
-rw-r--r--arch/mips/tx4938/common/setup.c2
-rw-r--r--arch/mips/tx4938/toshiba_rbtx4938/setup.c5
-rw-r--r--arch/mips/vr41xx/Kconfig7
-rw-r--r--arch/mips/vr41xx/common/init.c2
-rw-r--r--drivers/Kconfig2
-rw-r--r--drivers/Makefile1
-rw-r--r--drivers/acpi/pci_link.c3
-rw-r--r--drivers/block/aoe/aoenet.c3
-rw-r--r--drivers/char/agp/alpha-agp.c15
-rw-r--r--drivers/char/agp/generic.c4
-rw-r--r--drivers/char/agp/intel-agp.c2
-rw-r--r--drivers/char/agp/uninorth-agp.c4
-rw-r--r--drivers/connector/cn_queue.c2
-rw-r--r--drivers/cpufreq/cpufreq.c8
-rw-r--r--drivers/cpufreq/cpufreq_stats.c6
-rw-r--r--drivers/cpufreq/freq_table.c16
-rw-r--r--drivers/dma/Kconfig34
-rw-r--r--drivers/dma/Makefile3
-rw-r--r--drivers/dma/dmaengine.c408
-rw-r--r--drivers/dma/ioatdma.c840
-rw-r--r--drivers/dma/ioatdma.h125
-rw-r--r--drivers/dma/ioatdma_hw.h52
-rw-r--r--drivers/dma/ioatdma_io.h118
-rw-r--r--drivers/dma/ioatdma_registers.h126
-rw-r--r--drivers/dma/iovlock.c301
-rw-r--r--drivers/infiniband/Kconfig5
-rw-r--r--drivers/infiniband/core/Makefile11
-rw-r--r--drivers/infiniband/core/addr.c367
-rw-r--r--drivers/infiniband/core/cache.c30
-rw-r--r--drivers/infiniband/core/cm.c119
-rw-r--r--drivers/infiniband/core/cma.c1927
-rw-r--r--drivers/infiniband/core/fmr_pool.c30
-rw-r--r--drivers/infiniband/core/mad.c97
-rw-r--r--drivers/infiniband/core/mad_priv.h2
-rw-r--r--drivers/infiniband/core/sa_query.c31
-rw-r--r--drivers/infiniband/core/ucm.c183
-rw-r--r--drivers/infiniband/core/uverbs.h4
-rw-r--r--drivers/infiniband/core/uverbs_cmd.c971
-rw-r--r--drivers/infiniband/core/uverbs_main.c35
-rw-r--r--drivers/infiniband/core/uverbs_marshall.c138
-rw-r--r--drivers/infiniband/core/verbs.c44
-rw-r--r--drivers/infiniband/hw/ipath/ipath_mad.c42
-rw-r--r--drivers/infiniband/hw/mthca/mthca_cmd.c23
-rw-r--r--drivers/infiniband/hw/mthca/mthca_cq.c12
-rw-r--r--drivers/infiniband/hw/mthca/mthca_eq.c4
-rw-r--r--drivers/infiniband/hw/mthca/mthca_mad.c14
-rw-r--r--drivers/infiniband/hw/mthca/mthca_provider.c33
-rw-r--r--drivers/infiniband/hw/mthca/mthca_provider.h3
-rw-r--r--drivers/infiniband/hw/mthca/mthca_qp.c40
-rw-r--r--drivers/infiniband/hw/mthca/mthca_reset.c59
-rw-r--r--drivers/infiniband/hw/mthca/mthca_srq.c5
-rw-r--r--drivers/infiniband/ulp/ipoib/ipoib.h34
-rw-r--r--drivers/infiniband/ulp/ipoib/ipoib_ib.c27
-rw-r--r--drivers/infiniband/ulp/ipoib/ipoib_main.c28
-rw-r--r--drivers/infiniband/ulp/ipoib/ipoib_multicast.c17
-rw-r--r--drivers/infiniband/ulp/ipoib/ipoib_verbs.c3
-rw-r--r--drivers/infiniband/ulp/srp/ib_srp.c482
-rw-r--r--drivers/infiniband/ulp/srp/ib_srp.h33
-rw-r--r--drivers/media/dvb/dvb-core/dvb_net.c4
-rw-r--r--drivers/mmc/sdhci.c2
-rw-r--r--drivers/net/3c501.c2
-rw-r--r--drivers/net/3c503.c2
-rw-r--r--drivers/net/3c505.c2
-rw-r--r--drivers/net/3c507.c2
-rw-r--r--drivers/net/3c523.c2
-rw-r--r--drivers/net/3c527.c2
-rw-r--r--drivers/net/8139cp.c14
-rw-r--r--drivers/net/8139too.c14
-rw-r--r--drivers/net/Kconfig36
-rw-r--r--drivers/net/Makefile2
-rw-r--r--drivers/net/au1000_eth.c1802
-rw-r--r--drivers/net/au1000_eth.h134
-rw-r--r--drivers/net/bnx2.c190
-rw-r--r--drivers/net/bnx2.h15
-rw-r--r--drivers/net/bnx2_fw.h5256
-rw-r--r--drivers/net/bonding/bond_main.c9
-rw-r--r--drivers/net/cassini.c9
-rw-r--r--drivers/net/e100.c75
-rw-r--r--drivers/net/e1000/Makefile3
-rw-r--r--drivers/net/e1000/e1000.h6
-rw-r--r--drivers/net/e1000/e1000_ethtool.c41
-rw-r--r--drivers/net/e1000/e1000_hw.c115
-rw-r--r--drivers/net/e1000/e1000_hw.h7
-rw-r--r--drivers/net/e1000/e1000_main.c385
-rw-r--r--drivers/net/e1000/e1000_osdep.h3
-rw-r--r--drivers/net/e1000/e1000_param.c3
-rw-r--r--drivers/net/epic100.c56
-rw-r--r--drivers/net/forcedeth.c1779
-rw-r--r--drivers/net/hamradio/6pack.c8
-rw-r--r--drivers/net/hamradio/mkiss.c8
-rw-r--r--drivers/net/hp-plus.c2
-rw-r--r--drivers/net/hp.c4
-rw-r--r--drivers/net/ibmlana.c20
-rw-r--r--drivers/net/ibmlana.h6
-rw-r--r--drivers/net/ibmveth.c291
-rw-r--r--drivers/net/ibmveth.h11
-rw-r--r--drivers/net/ifb.c10
-rw-r--r--drivers/net/irda/Kconfig15
-rw-r--r--drivers/net/irda/Makefile1
-rw-r--r--drivers/net/irda/ali-ircc.c106
-rw-r--r--drivers/net/irda/irda-usb.c327
-rw-r--r--drivers/net/irda/irda-usb.h10
-rw-r--r--drivers/net/irda/mcs7780.c1009
-rw-r--r--drivers/net/irda/mcs7780.h167
-rw-r--r--drivers/net/irda/stir4200.c38
-rw-r--r--drivers/net/irda/vlsi_ir.c2
-rw-r--r--drivers/net/ixgb/Makefile2
-rw-r--r--drivers/net/ixgb/ixgb.h12
-rw-r--r--drivers/net/ixgb/ixgb_ee.c2
-rw-r--r--drivers/net/ixgb/ixgb_ee.h2
-rw-r--r--drivers/net/ixgb/ixgb_ethtool.c57
-rw-r--r--drivers/net/ixgb/ixgb_hw.c2
-rw-r--r--drivers/net/ixgb/ixgb_hw.h3
-rw-r--r--drivers/net/ixgb/ixgb_ids.h6
-rw-r--r--drivers/net/ixgb/ixgb_main.c304
-rw-r--r--drivers/net/ixgb/ixgb_osdep.h2
-rw-r--r--drivers/net/ixgb/ixgb_param.c26
-rw-r--r--drivers/net/mv643xx_eth.c2
-rw-r--r--drivers/net/myri10ge/Makefile5
-rw-r--r--drivers/net/myri10ge/myri10ge.c2869
-rw-r--r--drivers/net/myri10ge/myri10ge_mcp.h205
-rw-r--r--drivers/net/myri10ge/myri10ge_mcp_gen_header.h58
-rw-r--r--drivers/net/natsemi.c4
-rw-r--r--drivers/net/ne.c2
-rw-r--r--drivers/net/ne2.c2
-rw-r--r--drivers/net/pcmcia/pcnet_cs.c42
-rw-r--r--drivers/net/phy/Kconfig6
-rw-r--r--drivers/net/phy/Makefile1
-rw-r--r--drivers/net/phy/smsc.c101
-rw-r--r--drivers/net/ppp_generic.c2
-rw-r--r--drivers/net/r8169.c1
-rw-r--r--drivers/net/s2io-regs.h32
-rw-r--r--drivers/net/s2io.c1476
-rw-r--r--drivers/net/s2io.h59
-rw-r--r--drivers/net/sis900.c26
-rw-r--r--drivers/net/sis900.h10
-rw-r--r--drivers/net/skge.c232
-rw-r--r--drivers/net/skge.h6
-rw-r--r--drivers/net/smc-ultra.c2
-rw-r--r--drivers/net/smc-ultra32.c2
-rw-r--r--drivers/net/smc911x.c2307
-rw-r--r--drivers/net/smc911x.h835
-rw-r--r--drivers/net/smc9194.c7
-rw-r--r--drivers/net/smc91x.h62
-rw-r--r--drivers/net/sungem_phy.c6
-rw-r--r--drivers/net/tg3.c86
-rw-r--r--drivers/net/tg3.h21
-rw-r--r--drivers/net/tulip/de2104x.c58
-rw-r--r--drivers/net/tulip/de4x5.c716
-rw-r--r--drivers/net/tulip/de4x5.h14
-rw-r--r--drivers/net/tulip/dmfe.c2
-rw-r--r--drivers/net/tulip/eeprom.c8
-rw-r--r--drivers/net/tulip/interrupt.c126
-rw-r--r--drivers/net/tulip/media.c2
-rw-r--r--drivers/net/tulip/tulip.h2
-rw-r--r--drivers/net/tulip/tulip_core.c14
-rw-r--r--drivers/net/tulip/uli526x.c80
-rw-r--r--drivers/net/tulip/winbond-840.c33
-rw-r--r--drivers/net/tulip/xircom_cb.c208
-rw-r--r--drivers/net/via-velocity.c10
-rw-r--r--drivers/net/via-velocity.h2
-rw-r--r--drivers/net/wan/pci200syn.c27
-rw-r--r--drivers/net/wireless/Kconfig47
-rw-r--r--drivers/net/wireless/Makefile2
-rw-r--r--drivers/net/wireless/airo.c271
-rw-r--r--drivers/net/wireless/bcm43xx/bcm43xx.h1
-rw-r--r--drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c2
-rw-r--r--drivers/net/wireless/bcm43xx/bcm43xx_main.c48
-rw-r--r--drivers/net/wireless/hermes.c66
-rw-r--r--drivers/net/wireless/hermes.h43
-rw-r--r--drivers/net/wireless/hostap/hostap_80211_tx.c1
-rw-r--r--drivers/net/wireless/hostap/hostap_ap.c11
-rw-r--r--drivers/net/wireless/hostap/hostap_cs.c6
-rw-r--r--drivers/net/wireless/hostap/hostap_main.c2
-rw-r--r--drivers/net/wireless/ipw2200.c849
-rw-r--r--drivers/net/wireless/ipw2200.h83
-rw-r--r--drivers/net/wireless/orinoco.c255
-rw-r--r--drivers/net/wireless/orinoco.h19
-rw-r--r--drivers/net/wireless/orinoco_cs.c42
-rw-r--r--drivers/net/wireless/orinoco_nortel.c171
-rw-r--r--drivers/net/wireless/orinoco_pci.c210
-rw-r--r--drivers/net/wireless/orinoco_pci.h104
-rw-r--r--drivers/net/wireless/orinoco_plx.c223
-rw-r--r--drivers/net/wireless/orinoco_tmd.c99
-rw-r--r--drivers/net/wireless/spectrum_cs.c81
-rw-r--r--drivers/net/wireless/zd1201.c (renamed from drivers/usb/net/zd1201.c)67
-rw-r--r--drivers/net/wireless/zd1201.h (renamed from drivers/usb/net/zd1201.h)0
-rw-r--r--drivers/pci/pci.c3
-rw-r--r--drivers/s390/net/Makefile3
-rw-r--r--drivers/s390/net/ctcmain.c45
-rw-r--r--drivers/s390/net/ctcmain.h12
-rw-r--r--drivers/s390/net/ctctty.c1259
-rw-r--r--drivers/s390/net/ctctty.h35
-rw-r--r--drivers/scsi/libata-core.c1
-rw-r--r--drivers/serial/s3c2410.c2
-rw-r--r--drivers/serial/serial_lh7a40x.c13
-rw-r--r--drivers/usb/net/Kconfig17
-rw-r--r--drivers/usb/net/Makefile1
-rw-r--r--drivers/video/Kconfig65
-rw-r--r--drivers/video/intelfb/intelfb.h16
-rw-r--r--drivers/video/intelfb/intelfbdrv.c85
-rw-r--r--drivers/video/intelfb/intelfbhw.c494
-rw-r--r--drivers/video/intelfb/intelfbhw.h25
-rw-r--r--include/asm-arm/arch-lh7a40x/clocks.h20
-rw-r--r--include/asm-arm/arch-lh7a40x/constants.h8
-rw-r--r--include/asm-arm/arch-lh7a40x/dma.h79
-rw-r--r--include/asm-arm/arch-lh7a40x/entry-macro.S70
-rw-r--r--include/asm-arm/arch-lh7a40x/hardware.h4
-rw-r--r--include/asm-arm/arch-lh7a40x/irqs.h7
-rw-r--r--include/asm-arm/arch-lh7a40x/registers.h64
-rw-r--r--include/asm-arm/arch-lh7a40x/ssp.h71
-rw-r--r--include/asm-arm/arch-lh7a40x/uncompress.h2
-rw-r--r--include/asm-arm/arch-pnx4008/clock.h61
-rw-r--r--include/asm-arm/arch-pnx4008/debug-macro.S27
-rw-r--r--include/asm-arm/arch-pnx4008/dma.h162
-rw-r--r--include/asm-arm/arch-pnx4008/entry-macro.S121
-rw-r--r--include/asm-arm/arch-pnx4008/gpio.h139
-rw-r--r--include/asm-arm/arch-pnx4008/hardware.h32
-rw-r--r--include/asm-arm/arch-pnx4008/io.h21
-rw-r--r--include/asm-arm/arch-pnx4008/irq.h42
-rw-r--r--include/asm-arm/arch-pnx4008/irqs.h215
-rw-r--r--include/asm-arm/arch-pnx4008/memory.h24
-rw-r--r--include/asm-arm/arch-pnx4008/param.h21
-rw-r--r--include/asm-arm/arch-pnx4008/platform.h69
-rw-r--r--include/asm-arm/arch-pnx4008/pm.h62
-rw-r--r--include/asm-arm/arch-pnx4008/system.h38
-rw-r--r--include/asm-arm/arch-pnx4008/timex.h73
-rw-r--r--include/asm-arm/arch-pnx4008/uncompress.h46
-rw-r--r--include/asm-arm/arch-pnx4008/vmalloc.h20
-rw-r--r--include/asm-arm/arch-s3c2410/map.h11
-rw-r--r--include/asm-arm/arch-s3c2410/regs-clock.h6
-rw-r--r--include/asm-arm/arch-s3c2410/regs-gpio.h5
-rw-r--r--include/asm-arm/arch-s3c2410/uncompress.h5
-rw-r--r--include/asm-arm/mach/time.h1
-rw-r--r--include/asm-mips/addrspace.h35
-rw-r--r--include/asm-mips/apm.h65
-rw-r--r--include/asm-mips/asmmacro-32.h4
-rw-r--r--include/asm-mips/asmmacro-64.h19
-rw-r--r--include/asm-mips/bootinfo.h13
-rw-r--r--include/asm-mips/ddb5074.h11
-rw-r--r--include/asm-mips/ddb5xxx/ddb5074.h38
-rw-r--r--include/asm-mips/ddb5xxx/ddb5476.h157
-rw-r--r--include/asm-mips/ddb5xxx/ddb5xxx.h11
-rw-r--r--include/asm-mips/emma2rh/emma2rh.h330
-rw-r--r--include/asm-mips/emma2rh/markeins.h76
-rw-r--r--include/asm-mips/fpu.h3
-rw-r--r--include/asm-mips/fpu_emulator.h4
-rw-r--r--include/asm-mips/futex.h32
-rw-r--r--include/asm-mips/mach-ddb5074/mc146818rtc.h31
-rw-r--r--include/asm-mips/mach-dec/param.h18
-rw-r--r--include/asm-mips/mach-emma2rh/irq.h (renamed from include/asm-mips/mach-mips/param.h)8
-rw-r--r--include/asm-mips/mach-excite/cpu-feature-overrides.h40
-rw-r--r--include/asm-mips/mach-excite/excite.h155
-rw-r--r--include/asm-mips/mach-excite/excite_nandflash.h7
-rw-r--r--include/asm-mips/mach-excite/rm9k_eth.h23
-rw-r--r--include/asm-mips/mach-excite/rm9k_wdt.h12
-rw-r--r--include/asm-mips/mach-excite/rm9k_xicap.h16
-rw-r--r--include/asm-mips/mach-generic/param.h13
-rw-r--r--include/asm-mips/mach-ip22/cpu-feature-overrides.h2
-rw-r--r--include/asm-mips/mach-ip27/cpu-feature-overrides.h3
-rw-r--r--include/asm-mips/mach-ip32/cpu-feature-overrides.h2
-rw-r--r--include/asm-mips/mach-jazz/param.h16
-rw-r--r--include/asm-mips/mach-mips/cpu-feature-overrides.h4
-rw-r--r--include/asm-mips/mach-qemu/param.h13
-rw-r--r--include/asm-mips/mach-rm200/cpu-feature-overrides.h4
-rw-r--r--include/asm-mips/mach-sim/cpu-feature-overrides.h4
-rw-r--r--include/asm-mips/mach-wrppmc/mach-gt64120.h84
-rw-r--r--include/asm-mips/mipsregs.h4
-rw-r--r--include/asm-mips/mmzone.h11
-rw-r--r--include/asm-mips/page.h19
-rw-r--r--include/asm-mips/param.h2
-rw-r--r--include/asm-mips/pci/bridge.h3
-rw-r--r--include/asm-mips/pgtable.h2
-rw-r--r--include/asm-mips/processor.h16
-rw-r--r--include/asm-mips/qemu.h6
-rw-r--r--include/asm-mips/rm9k-ocd.h56
-rw-r--r--include/asm-mips/sn/addrs.h27
-rw-r--r--include/asm-mips/sn/fru.h (renamed from include/asm-mips/sn/sn0/sn0_fru.h)8
-rw-r--r--include/asm-mips/sn/klconfig.h89
-rw-r--r--include/asm-mips/sn/kldir.h34
-rw-r--r--include/asm-mips/sn/sn0/addrs.h87
-rw-r--r--include/asm-mips/sn/sn0/arch.h17
-rw-r--r--include/asm-mips/sn/sn0/hub.h4
-rw-r--r--include/asm-mips/sn/sn0/hubio.h16
-rw-r--r--include/asm-mips/sn/sn0/hubmd.h2
-rw-r--r--include/asm-mips/sn/sn0/hubpi.h18
-rw-r--r--include/asm-mips/sn/sn0/ip27.h9
-rw-r--r--include/asm-mips/sni.h7
-rw-r--r--include/asm-mips/war.h5
-rw-r--r--include/linux/console.h4
-rw-r--r--include/linux/dmaengine.h359
-rw-r--r--include/linux/igmp.h2
-rw-r--r--include/linux/netdevice.h45
-rw-r--r--include/linux/netfilter/nf_conntrack_common.h4
-rw-r--r--include/linux/netfilter/nfnetlink_conntrack.h4
-rw-r--r--include/linux/netfilter/xt_CONNSECMARK.h13
-rw-r--r--include/linux/netfilter/xt_SECMARK.h26
-rw-r--r--include/linux/netfilter/xt_quota.h16
-rw-r--r--include/linux/netfilter/xt_statistic.h32
-rw-r--r--include/linux/netfilter_ipv4/ip_conntrack.h6
-rw-r--r--include/linux/netfilter_ipv4/ip_conntrack_h323.h7
-rw-r--r--include/linux/netfilter_ipv4/ip_conntrack_helper_h323_types.h3
-rw-r--r--include/linux/netfilter_ipv4/ip_conntrack_sip.h44
-rw-r--r--include/linux/pci.h2
-rw-r--r--include/linux/pci_ids.h12
-rw-r--r--include/linux/pfkeyv2.h2
-rw-r--r--include/linux/security.h40
-rw-r--r--include/linux/selinux.h32
-rw-r--r--include/linux/skbuff.h74
-rw-r--r--include/linux/sysctl.h4
-rw-r--r--include/linux/tcp.h8
-rw-r--r--include/linux/xfrm.h4
-rw-r--r--include/net/ieee80211.h9
-rw-r--r--include/net/ieee80211softmac.h40
-rw-r--r--include/net/ieee80211softmac_wx.h5
-rw-r--r--include/net/ip.h1
-rw-r--r--include/net/llc_if.h17
-rw-r--r--include/net/netdma.h44
-rw-r--r--include/net/netfilter/nf_conntrack.h5
-rw-r--r--include/net/netfilter/nf_conntrack_compat.h26
-rw-r--r--include/net/raw.h2
-rw-r--r--include/net/sctp/sctp.h2
-rw-r--r--include/net/sctp/structs.h3
-rw-r--r--include/net/sock.h20
-rw-r--r--include/net/tcp.h15
-rw-r--r--include/net/xfrm.h26
-rw-r--r--include/rdma/ib_addr.h114
-rw-r--r--include/rdma/ib_cache.h13
-rw-r--r--include/rdma/ib_cm.h26
-rw-r--r--include/rdma/ib_marshall.h50
-rw-r--r--include/rdma/ib_sa.h7
-rw-r--r--include/rdma/ib_smi.h36
-rw-r--r--include/rdma/ib_user_cm.h86
-rw-r--r--include/rdma/ib_user_sa.h60
-rw-r--r--include/rdma/ib_user_verbs.h80
-rw-r--r--include/rdma/ib_verbs.h22
-rw-r--r--include/rdma/rdma_cm.h256
-rw-r--r--include/rdma/rdma_cm_ib.h47
-rw-r--r--include/scsi/srp.h5
-rw-r--r--kernel/power/main.c2
-rw-r--r--kernel/printk.c28
-rw-r--r--net/Kconfig22
-rw-r--r--net/atm/clip.c4
-rw-r--r--net/bridge/Makefile2
-rw-r--r--net/bridge/br.c28
-rw-r--r--net/bridge/br_device.c6
-rw-r--r--net/bridge/br_forward.c12
-rw-r--r--net/bridge/br_if.c13
-rw-r--r--net/bridge/br_netfilter.c14
-rw-r--r--net/bridge/br_netlink.c199
-rw-r--r--net/bridge/br_notify.c2
-rw-r--r--net/bridge/br_private.h12
-rw-r--r--net/bridge/br_stp_if.c4
-rw-r--r--net/core/Makefile1
-rw-r--r--net/core/dev.c185
-rw-r--r--net/core/dev_mcast.c28
-rw-r--r--net/core/ethtool.c9
-rw-r--r--net/core/netpoll.c9
-rw-r--r--net/core/pktgen.c4
-rw-r--r--net/core/skbuff.c10
-rw-r--r--net/core/sock.c6
-rw-r--r--net/core/user_dma.c131
-rw-r--r--net/dccp/proto.c4
-rw-r--r--net/decnet/dn_nsp_in.c3
-rw-r--r--net/decnet/dn_route.c3
-rw-r--r--net/ieee80211/ieee80211_crypt_tkip.c11
-rw-r--r--net/ieee80211/ieee80211_rx.c18
-rw-r--r--net/ieee80211/ieee80211_tx.c88
-rw-r--r--net/ieee80211/ieee80211_wx.c44
-rw-r--r--net/ieee80211/softmac/Kconfig1
-rw-r--r--net/ieee80211/softmac/ieee80211softmac_assoc.c96
-rw-r--r--net/ieee80211/softmac/ieee80211softmac_auth.c15
-rw-r--r--net/ieee80211/softmac/ieee80211softmac_event.c30
-rw-r--r--net/ieee80211/softmac/ieee80211softmac_io.c169
-rw-r--r--net/ieee80211/softmac/ieee80211softmac_module.c117
-rw-r--r--net/ieee80211/softmac/ieee80211softmac_priv.h5
-rw-r--r--net/ieee80211/softmac/ieee80211softmac_wx.c36
-rw-r--r--net/ipv4/Kconfig50
-rw-r--r--net/ipv4/Makefile6
-rw-r--r--net/ipv4/ah4.c15
-rw-r--r--net/ipv4/esp4.c18
-rw-r--r--net/ipv4/fib_frontend.c1
-rw-r--r--net/ipv4/icmp.c5
-rw-r--r--net/ipv4/igmp.c2
-rw-r--r--net/ipv4/ip_output.c3
-rw-r--r--net/ipv4/ipcomp.c34
-rw-r--r--net/ipv4/netfilter/Kconfig40
-rw-r--r--net/ipv4/netfilter/Makefile2
-rw-r--r--net/ipv4/netfilter/ip_conntrack_amanda.c143
-rw-r--r--net/ipv4/netfilter/ip_conntrack_core.c9
-rw-r--r--net/ipv4/netfilter/ip_conntrack_ftp.c77
-rw-r--r--net/ipv4/netfilter/ip_conntrack_helper_h323.c111
-rw-r--r--net/ipv4/netfilter/ip_conntrack_helper_h323_types.c6
-rw-r--r--net/ipv4/netfilter/ip_conntrack_netlink.c85
-rw-r--r--net/ipv4/netfilter/ip_conntrack_proto_gre.c6
-rw-r--r--net/ipv4/netfilter/ip_conntrack_proto_icmp.c2
-rw-r--r--net/ipv4/netfilter/ip_conntrack_proto_tcp.c2
-rw-r--r--net/ipv4/netfilter/ip_conntrack_proto_udp.c2
-rw-r--r--net/ipv4/netfilter/ip_conntrack_sip.c471
-rw-r--r--net/ipv4/netfilter/ip_conntrack_standalone.c18
-rw-r--r--net/ipv4/netfilter/ip_nat_helper_h323.c77
-rw-r--r--net/ipv4/netfilter/ip_nat_sip.c249
-rw-r--r--net/ipv4/netfilter/ip_nat_snmp_basic.c2
-rw-r--r--net/ipv4/netfilter/ipt_CLUSTERIP.c20
-rw-r--r--net/ipv4/netfilter/ipt_REJECT.c1
-rw-r--r--net/ipv4/netfilter/ipt_hashlimit.c73
-rw-r--r--net/ipv4/netfilter/ipt_recent.c1276
-rw-r--r--net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c2
-rw-r--r--net/ipv4/netfilter/nf_conntrack_proto_icmp.c2
-rw-r--r--net/ipv4/raw.c2
-rw-r--r--net/ipv4/sysctl_net_ipv4.c26
-rw-r--r--net/ipv4/tcp.c127
-rw-r--r--net/ipv4/tcp_bic.c7
-rw-r--r--net/ipv4/tcp_compound.c448
-rw-r--r--net/ipv4/tcp_cong.c6
-rw-r--r--net/ipv4/tcp_cubic.c6
-rw-r--r--net/ipv4/tcp_highspeed.c24
-rw-r--r--net/ipv4/tcp_htcp.c9
-rw-r--r--net/ipv4/tcp_input.c89
-rw-r--r--net/ipv4/tcp_ipv4.c18
-rw-r--r--net/ipv4/tcp_lp.c338
-rw-r--r--net/ipv4/tcp_output.c6
-rw-r--r--net/ipv4/tcp_probe.c181
-rw-r--r--net/ipv4/tcp_veno.c231
-rw-r--r--net/ipv4/tcp_westwood.c80
-rw-r--r--net/ipv4/xfrm4_input.c28
-rw-r--r--net/ipv4/xfrm4_mode_transport.c83
-rw-r--r--net/ipv4/xfrm4_mode_tunnel.c125
-rw-r--r--net/ipv4/xfrm4_output.c61
-rw-r--r--net/ipv4/xfrm4_policy.c6
-rw-r--r--net/ipv4/xfrm4_state.c1
-rw-r--r--net/ipv6/Kconfig20
-rw-r--r--net/ipv6/Makefile2
-rw-r--r--net/ipv6/addrconf.c28
-rw-r--r--net/ipv6/ah6.c10
-rw-r--r--net/ipv6/esp6.c20
-rw-r--r--net/ipv6/ip6_output.c3
-rw-r--r--net/ipv6/ipcomp6.c38
-rw-r--r--net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c2
-rw-r--r--net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c2
-rw-r--r--net/ipv6/netfilter/nf_conntrack_reasm.c10
-rw-r--r--net/ipv6/tcp_ipv6.c12
-rw-r--r--net/ipv6/xfrm6_input.c29
-rw-r--r--net/ipv6/xfrm6_mode_transport.c88
-rw-r--r--net/ipv6/xfrm6_mode_tunnel.c121
-rw-r--r--net/ipv6/xfrm6_output.c63
-rw-r--r--net/ipv6/xfrm6_policy.c6
-rw-r--r--net/ipv6/xfrm6_state.c1
-rw-r--r--net/ipx/ipx_route.c2
-rw-r--r--net/irda/irlmp.c6
-rw-r--r--net/key/af_key.c17
-rw-r--r--net/llc/af_llc.c6
-rw-r--r--net/llc/llc_if.c2
-rw-r--r--net/llc/llc_input.c10
-rw-r--r--net/llc/llc_sap.c59
-rw-r--r--net/netfilter/Kconfig48
-rw-r--r--net/netfilter/Makefile4
-rw-r--r--net/netfilter/nf_conntrack_core.c9
-rw-r--r--net/netfilter/nf_conntrack_ftp.c77
-rw-r--r--net/netfilter/nf_conntrack_netlink.c85
-rw-r--r--net/netfilter/nf_conntrack_proto_tcp.c5
-rw-r--r--net/netfilter/nf_conntrack_proto_udp.c3
-rw-r--r--net/netfilter/nf_conntrack_standalone.c16
-rw-r--r--net/netfilter/xt_CONNSECMARK.c155
-rw-r--r--net/netfilter/xt_SECMARK.c156
-rw-r--r--net/netfilter/xt_connmark.c2
-rw-r--r--net/netfilter/xt_dccp.c3
-rw-r--r--net/netfilter/xt_mark.c2
-rw-r--r--net/netfilter/xt_multiport.c7
-rw-r--r--net/netfilter/xt_quota.c96
-rw-r--r--net/netfilter/xt_sctp.c4
-rw-r--r--net/netfilter/xt_statistic.c112
-rw-r--r--net/netfilter/xt_string.c2
-rw-r--r--net/sched/sch_generic.c28
-rw-r--r--net/sched/sch_teql.c9
-rw-r--r--net/sctp/input.c6
-rw-r--r--net/sctp/ipv6.c6
-rw-r--r--net/sctp/output.c48
-rw-r--r--net/sctp/outqueue.c1
-rw-r--r--net/sctp/protocol.c8
-rw-r--r--net/sctp/sm_statefuns.c10
-rw-r--r--net/sctp/socket.c28
-rw-r--r--net/sctp/ulpevent.c30
-rw-r--r--net/xfrm/xfrm_policy.c141
-rw-r--r--net/xfrm/xfrm_state.c15
-rw-r--r--net/xfrm/xfrm_user.c19
-rw-r--r--security/dummy.c12
-rw-r--r--security/selinux/Kconfig29
-rw-r--r--security/selinux/exports.c22
-rw-r--r--security/selinux/hooks.c246
-rw-r--r--security/selinux/include/av_inherit.h1
-rw-r--r--security/selinux/include/av_perm_to_string.h3
-rw-r--r--security/selinux/include/av_permissions.h26
-rw-r--r--security/selinux/include/class_to_string.h2
-rw-r--r--security/selinux/include/flask.h2
-rw-r--r--security/selinux/include/xfrm.h4
-rw-r--r--security/selinux/selinuxfs.c66
-rw-r--r--security/selinux/xfrm.c51
-rw-r--r--sound/oss/Kconfig4
765 files changed, 50998 insertions, 18394 deletions
diff --git a/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen b/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen
new file mode 100644
index 000000000000..1e6a23fdf2fc
--- /dev/null
+++ b/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen
@@ -0,0 +1,61 @@
+README on the ADC/Touchscreen Controller
+========================================
+
+The LH79524 and LH7A404 include a built-in Analog to Digital
+controller (ADC) that is used to process input from a touchscreen.
+The driver only implements a four-wire touch panel protocol.
+
+The touchscreen driver is maintenance free except for the pen-down or
+touch threshold. Some resistive displays and board combinations may
+require tuning of this threshold. The driver exposes some of it's
+internal state in the sys filesystem. If the kernel is configured
+with it, CONFIG_SYSFS, and sysfs is mounted at /sys, there will be a
+directory
+
+ /sys/devices/platform/adc-lh7.0
+
+containing these files.
+
+ -r--r--r-- 1 root root 4096 Jan 1 00:00 samples
+ -rw-r--r-- 1 root root 4096 Jan 1 00:00 threshold
+ -r--r--r-- 1 root root 4096 Jan 1 00:00 threshold_range
+
+The threshold is the current touch threshold. It defaults to 750 on
+most targets.
+
+ # cat threshold
+ 750
+
+The threshold_range contains the range of valid values for the
+threshold. Values outside of this range will be silently ignored.
+
+ # cat threshold_range
+ 0 1023
+
+To change the threshold, write a value to the threshold file.
+
+ # echo 500 > threshold
+ # cat threshold
+ 500
+
+The samples file contains the most recently sampled values from the
+ADC. There are 12. Below are typical of the last sampled values when
+the pen has been released. The first two and last two samples are for
+detecting whether or not the pen is down. The third through sixth are
+X coordinate samples. The seventh through tenth are Y coordinate
+samples.
+
+ # cat samples
+ 1023 1023 0 0 0 0 530 529 530 529 1023 1023
+
+To determine a reasonable threshold, press on the touch panel with an
+appropriate stylus and read the values from samples.
+
+ # cat samples
+ 1023 676 92 103 101 102 855 919 922 922 1023 679
+
+The first and eleventh samples are discarded. Thus, the important
+values are the second and twelfth which are used to determine if the
+pen is down. When both are below the threshold, the driver registers
+that the pen is down. When either is above the threshold, it
+registers then pen is up.
diff --git a/Documentation/arm/Sharp-LH/LCDPanels b/Documentation/arm/Sharp-LH/LCDPanels
new file mode 100644
index 000000000000..fb1b21c2f2f4
--- /dev/null
+++ b/Documentation/arm/Sharp-LH/LCDPanels
@@ -0,0 +1,59 @@
+README on the LCD Panels
+========================
+
+Configuration options for several LCD panels, available from Logic PD,
+are included in the kernel source. This README will help you
+understand the configuration data and give you some guidance for
+adding support for other panels if you wish.
+
+
+lcd-panels.h
+------------
+
+There is no way, at present, to detect which panel is attached to the
+system at runtime. Thus the kernel configuration is static. The file
+arch/arm/mach-ld7a40x/lcd-panels.h (or similar) defines all of the
+panel specific parameters.
+
+It should be possible for this data to be shared among several device
+families. The current layout may be insufficiently general, but it is
+amenable to improvement.
+
+
+PIXEL_CLOCK
+-----------
+
+The panel data sheets will give a range of acceptable pixel clocks.
+The fundamental LCDCLK input frequency is divided down by a PCD
+constant in field '.tim2'. It may happen that it is impossible to set
+the pixel clock within this range. A clock which is too slow will
+tend to flicker. For the highest quality image, set the clock as high
+as possible.
+
+
+MARGINS
+-------
+
+These values may be difficult to glean from the panel data sheet. In
+the case of the Sharp panels, the upper margin is explicitly called
+out as a specific number of lines from the top of the frame. The
+other values may not matter as much as the panels tend to
+automatically center the image.
+
+
+Sync Sense
+----------
+
+The sense of the hsync and vsync pulses may be called out in the data
+sheet. On one panel, the sense of these pulses determine the height
+of the visible region on the panel. Most of the Sharp panels use
+negative sense sync pulses set by the TIM2_IHS and TIM2_IVS bits in
+'.tim2'.
+
+
+Pel Layout
+----------
+
+The Sharp color TFT panels are all configured for 16 bit direct color
+modes. The amba-lcd driver sets the pel mode to 565 for 5 bits of
+each red and blue and 6 bits of green.
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 43ab119963d5..f50cf8fac3f0 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -212,15 +212,6 @@ Who: Greg Kroah-Hartman <gregkh@suse.de>
---------------------------
-What: Support for NEC DDB5074 and DDB5476 evaluation boards.
-When: June 2006
-Why: Board specific code doesn't build anymore since ~2.6.0 and no
- users have complained indicating there is no more need for these
- boards. This should really be considered a last call.
-Who: Ralf Baechle <ralf@linux-mips.org>
-
----------------------------
-
What: USB driver API moves to EXPORT_SYMBOL_GPL
When: Febuary 2008
Files: include/linux/usb.h, drivers/usb/core/driver.c
diff --git a/Documentation/infiniband/ipoib.txt b/Documentation/infiniband/ipoib.txt
index 5c5a4ccce76a..187035560d7f 100644
--- a/Documentation/infiniband/ipoib.txt
+++ b/Documentation/infiniband/ipoib.txt
@@ -1,10 +1,10 @@
IP OVER INFINIBAND
The ib_ipoib driver is an implementation of the IP over InfiniBand
- protocol as specified by the latest Internet-Drafts issued by the
- IETF ipoib working group. It is a "native" implementation in the
- sense of setting the interface type to ARPHRD_INFINIBAND and the
- hardware address length to 20 (earlier proprietary implementations
+ protocol as specified by RFC 4391 and 4392, issued by the IETF ipoib
+ working group. It is a "native" implementation in the sense of
+ setting the interface type to ARPHRD_INFINIBAND and the hardware
+ address length to 20 (earlier proprietary implementations
masqueraded to the kernel as ethernet interfaces).
Partitions and P_Keys
@@ -53,3 +53,7 @@ References
IETF IP over InfiniBand (ipoib) Working Group
http://ietf.org/html.charters/ipoib-charter.html
+ Transmission of IP over InfiniBand (IPoIB) (RFC 4391)
+ http://ietf.org/rfc/rfc4391.txt
+ IP over InfiniBand (IPoIB) Architecture (RFC 4392)
+ http://ietf.org/rfc/rfc4392.txt
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index b3a6187e5305..a9d3a1794b23 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1402,6 +1402,15 @@ running once the system is up.
If enabled at boot time, /selinux/disable can be used
later to disable prior to initial policy load.
+ selinux_compat_net =
+ [SELINUX] Set initial selinux_compat_net flag value.
+ Format: { "0" | "1" }
+ 0 -- use new secmark-based packet controls
+ 1 -- use legacy packet controls
+ Default value is 0 (preferred).
+ Value can be changed at runtime via
+ /selinux/compat_net.
+
serialnumber [BUGS=IA-32]
sg_def_reserved_size= [SCSI]
diff --git a/Documentation/networking/README.ipw2200 b/Documentation/networking/README.ipw2200
index acb30c5dcff3..4f2a40f1dbc6 100644
--- a/Documentation/networking/README.ipw2200
+++ b/Documentation/networking/README.ipw2200
@@ -14,8 +14,8 @@ Copyright (C) 2004-2006, Intel Corporation
README.ipw2200
-Version: 1.0.8
-Date : October 20, 2005
+Version: 1.1.2
+Date : March 30, 2006
Index
@@ -103,7 +103,7 @@ file.
1.1. Overview of Features
-----------------------------------------------
-The current release (1.0.8) supports the following features:
+The current release (1.1.2) supports the following features:
+ BSS mode (Infrastructure, Managed)
+ IBSS mode (Ad-Hoc)
@@ -247,8 +247,8 @@ and can set the contents via echo. For example:
% cat /sys/bus/pci/drivers/ipw2200/debug_level
Will report the current debug level of the driver's logging subsystem
-(only available if CONFIG_IPW_DEBUG was configured when the driver was
-built).
+(only available if CONFIG_IPW2200_DEBUG was configured when the driver
+was built).
You can set the debug level via:
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 8d8b4e5ea184..afac780445cd 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -1,7 +1,7 @@
Linux Ethernet Bonding Driver HOWTO
- Latest update: 21 June 2005
+ Latest update: 24 April 2006
Initial release : Thomas Davis <tadavis at lbl.gov>
Corrections, HA extensions : 2000/10/03-15 :
@@ -12,6 +12,8 @@ Corrections, HA extensions : 2000/10/03-15 :
- Jay Vosburgh <fubar at us dot ibm dot com>
Reorganized and updated Feb 2005 by Jay Vosburgh
+Added Sysfs information: 2006/04/24
+ - Mitch Williams <mitch.a.williams at intel.com>
Introduction
============
@@ -38,61 +40,62 @@ Table of Contents
2. Bonding Driver Options
3. Configuring Bonding Devices
-3.1 Configuration with sysconfig support
-3.1.1 Using DHCP with sysconfig
-3.1.2 Configuring Multiple Bonds with sysconfig
-3.2 Configuration with initscripts support
-3.2.1 Using DHCP with initscripts
-3.2.2 Configuring Multiple Bonds with initscripts
-3.3 Configuring Bonding Manually
+3.1 Configuration with Sysconfig Support
+3.1.1 Using DHCP with Sysconfig
+3.1.2 Configuring Multiple Bonds with Sysconfig
+3.2 Configuration with Initscripts Support
+3.2.1 Using DHCP with Initscripts
+3.2.2 Configuring Multiple Bonds with Initscripts
+3.3 Configuring Bonding Manually with Ifenslave
3.3.1 Configuring Multiple Bonds Manually
+3.4 Configuring Bonding Manually via Sysfs
-5. Querying Bonding Configuration
-5.1 Bonding Configuration
-5.2 Network Configuration
+4. Querying Bonding Configuration
+4.1 Bonding Configuration
+4.2 Network Configuration
-6. Switch Configuration
+5. Switch Configuration
-7. 802.1q VLAN Support
+6. 802.1q VLAN Support
-8. Link Monitoring
-8.1 ARP Monitor Operation
-8.2 Configuring Multiple ARP Targets
-8.3 MII Monitor Operation
+7. Link Monitoring
+7.1 ARP Monitor Operation
+7.2 Configuring Multiple ARP Targets
+7.3 MII Monitor Operation
-9. Potential Trouble Sources
-9.1 Adventures in Routing
-9.2 Ethernet Device Renaming
-9.3 Painfully Slow Or No Failed Link Detection By Miimon
+8. Potential Trouble Sources
+8.1 Adventures in Routing
+8.2 Ethernet Device Renaming
+8.3 Painfully Slow Or No Failed Link Detection By Miimon
-10. SNMP agents
+9. SNMP agents
-11. Promiscuous mode
+10. Promiscuous mode
-12. Configuring Bonding for High Availability
-12.1 High Availability in a Single Switch Topology
-12.2 High Availability in a Multiple Switch Topology
-12.2.1 HA Bonding Mode Selection for Multiple Switch Topology
-12.2.2 HA Link Monitoring for Multiple Switch Topology
+11. Configuring Bonding for High Availability
+11.1 High Availability in a Single Switch Topology
+11.2 High Availability in a Multiple Switch Topology
+11.2.1 HA Bonding Mode Selection for Multiple Switch Topology
+11.2.2 HA Link Monitoring for Multiple Switch Topology
-13. Configuring Bonding for Maximum Throughput
-13.1 Maximum Throughput in a Single Switch Topology
-13.1.1 MT Bonding Mode Selection for Single Switch Topology
-13.1.2 MT Link Monitoring for Single Switch Topology
-13.2 Maximum Throughput in a Multiple Switch Topology
-13.2.1 MT Bonding Mode Selection for Multiple Switch Topology
-13.2.2 MT Link Monitoring for Multiple Switch Topology
+12. Configuring Bonding for Maximum Throughput
+12.1 Maximum Throughput in a Single Switch Topology
+12.1.1 MT Bonding Mode Selection for Single Switch Topology
+12.1.2 MT Link Monitoring for Single Switch Topology
+12.2 Maximum Throughput in a Multiple Switch Topology
+12.2.1 MT Bonding Mode Selection for Multiple Switch Topology
+12.2.2 MT Link Monitoring for Multiple Switch Topology
-14. Switch Behavior Issues
-14.1 Link Establishment and Failover Delays
-14.2 Duplicated Incoming Packets
+13. Switch Behavior Issues
+13.1 Link Establishment and Failover Delays
+13.2 Duplicated Incoming Packets
-15. Hardware Specific Considerations
-15.1 IBM BladeCenter
+14. Hardware Specific Considerations
+14.1 IBM BladeCenter
-16. Frequently Asked Questions
+15. Frequently Asked Questions
-17. Resources and Links
+16. Resources and Links
1. Bonding Driver Installation
@@ -156,6 +159,9 @@ you're trying to build it for. Some distros (e.g., Red Hat from 7.1
onwards) do not have /usr/include/linux symbolically linked to the
default kernel source include directory.
+SECOND IMPORTANT NOTE:
+ If you plan to configure bonding using sysfs, you do not need
+to use ifenslave.
2. Bonding Driver Options
=========================
@@ -270,7 +276,7 @@ mode
In bonding version 2.6.2 or later, when a failover
occurs in active-backup mode, bonding will issue one
or more gratuitous ARPs on the newly active slave.
- One gratutious ARP is issued for the bonding master
+ One gratuitous ARP is issued for the bonding master
interface and each VLAN interfaces configured above
it, provided that the interface has at least one IP
address configured. Gratuitous ARPs issued for VLAN
@@ -377,7 +383,7 @@ mode
When a link is reconnected or a new slave joins the
bond the receive traffic is redistributed among all
active slaves in the bond by initiating ARP Replies
- with the selected mac address to each of the
+ with the selected MAC address to each of the
clients. The updelay parameter (detailed below) must
be set to a value equal or greater than the switch's
forwarding delay so that the ARP Replies sent to the
@@ -498,11 +504,12 @@ not exist, and the layer2 policy is the only policy.
3. Configuring Bonding Devices
==============================
- There are, essentially, two methods for configuring bonding:
-with support from the distro's network initialization scripts, and
-without. Distros generally use one of two packages for the network
-initialization scripts: initscripts or sysconfig. Recent versions of
-these packages have support for bonding, while older versions do not.
+ You can configure bonding using either your distro's network
+initialization scripts, or manually using either ifenslave or the
+sysfs interface. Distros generally use one of two packages for the
+network initialization scripts: initscripts or sysconfig. Recent
+versions of these packages have support for bonding, while older
+versions do not.
We will first describe the options for configuring bonding for
distros using versions of initscripts and sysconfig with full or
@@ -530,7 +537,7 @@ $ grep ifenslave /sbin/ifup
If this returns any matches, then your initscripts or
sysconfig has support for bonding.
-3.1 Configuration with sysconfig support
+3.1 Configuration with Sysconfig Support
----------------------------------------
This section applies to distros using a version of sysconfig
@@ -538,7 +545,7 @@ with bonding support, for example, SuSE Linux Enterprise Server 9.
SuSE SLES 9's networking configuration system does support
bonding, however, at this writing, the YaST system configuration
-frontend does not provide any means to work with bonding devices.
+front end does not provide any means to work with bonding devices.
Bonding devices can be managed by hand, however, as follows.
First, if they have not already been configured, configure the
@@ -660,7 +667,7 @@ format can be found in an example ifcfg template file:
Note that the template does not document the various BONDING_
settings described above, but does describe many of the other options.
-3.1.1 Using DHCP with sysconfig
+3.1.1 Using DHCP with Sysconfig
-------------------------------
Under sysconfig, configuring a device with BOOTPROTO='dhcp'
@@ -670,7 +677,7 @@ attempt to obtain the device address from DHCP prior to adding any of
the slave devices. Without active slaves, the DHCP requests are not
sent to the network.
-3.1.2 Configuring Multiple Bonds with sysconfig
+3.1.2 Configuring Multiple Bonds with Sysconfig
-----------------------------------------------
The sysconfig network initialization system is capable of
@@ -685,7 +692,7 @@ ifcfg-bondX files.
options in the ifcfg-bondX file, it is not necessary to add them to
the system /etc/modules.conf or /etc/modprobe.conf configuration file.
-3.2 Configuration with initscripts support
+3.2 Configuration with Initscripts Support
------------------------------------------
This section applies to distros using a version of initscripts
@@ -756,7 +763,7 @@ options for your configuration.
will restart the networking subsystem and your bond link should be now
up and running.
-3.2.1 Using DHCP with initscripts
+3.2.1 Using DHCP with Initscripts
---------------------------------
Recent versions of initscripts (the version supplied with
@@ -768,7 +775,7 @@ above, except replace the line "BOOTPROTO=none" with "BOOTPROTO=dhcp"
and add a line consisting of "TYPE=Bonding". Note that the TYPE value
is case sensitive.
-3.2.2 Configuring Multiple Bonds with initscripts
+3.2.2 Configuring Multiple Bonds with Initscripts
-------------------------------------------------
At this writing, the initscripts package does not directly
@@ -784,8 +791,8 @@ Fedora Core kernels, and has been seen on RHEL 4 as well. On kernels
exhibiting this problem, it will be impossible to configure multiple
bonds with differing parameters.
-3.3 Configuring Bonding Manually
---------------------------------
+3.3 Configuring Bonding Manually with Ifenslave
+-----------------------------------------------
This section applies to distros whose network initialization
scripts (the sysconfig or initscripts package) do not have specific
@@ -889,11 +896,139 @@ install bond1 /sbin/modprobe --ignore-install bonding -o bond1 \
This may be repeated any number of times, specifying a new and
unique name in place of bond1 for each subsequent instance.
+3.4 Configuring Bonding Manually via Sysfs
+------------------------------------------
+
+ Starting with version 3.0, Channel Bonding may be configured
+via the sysfs interface. This interface allows dynamic configuration
+of all bonds in the system without unloading the module. It also
+allows for adding and removing bonds at runtime. Ifenslave is no
+longer required, though it is still supported.
+
+ Use of the sysfs interface allows you to use multiple bonds
+with different configurations without having to reload the module.
+It also allows you to use multiple, differently configured bonds when
+bonding is compiled into the kernel.
+
+ You must have the sysfs filesystem mounted to configure
+bonding this way. The examples in this document assume that you
+are using the standard mount point for sysfs, e.g. /sys. If your
+sysfs filesystem is mounted elsewhere, you will need to adjust the
+example paths accordingly.
+
+Creating and Destroying Bonds
+-----------------------------
+To add a new bond foo:
+# echo +foo > /sys/class/net/bonding_masters
+
+To remove an existing bond bar:
+# echo -bar > /sys/class/net/bonding_masters
+
+To show all existing bonds:
+# cat /sys/class/net/bonding_masters
+
+NOTE: due to 4K size limitation of sysfs files, this list may be
+truncated if you have more than a few hundred bonds. This is unlikely
+to occur under normal operating conditions.
+
+Adding and Removing Slaves
+--------------------------
+ Interfaces may be enslaved to a bond using the file
+/sys/class/net/<bond>/bonding/slaves. The semantics for this file
+are the same as for the bonding_masters file.
+
+To enslave interface eth0 to bond bond0:
+# ifconfig bond0 up
+# echo +eth0 > /sys/class/net/bond0/bonding/slaves
+
+To free slave eth0 from bond bond0:
+# echo -eth0 > /sys/class/net/bond0/bonding/slaves
+
+ NOTE: The bond must be up before slaves can be added. All
+slaves are freed when the interface is brought down.
+
+ When an interface is enslaved to a bond, symlinks between the
+two are created in the sysfs filesystem. In this case, you would get
+/sys/class/net/bond0/slave_eth0 pointing to /sys/class/net/eth0, and
+/sys/class/net/eth0/master pointing to /sys/class/net/bond0.
+
+ This means that you can tell quickly whether or not an
+interface is enslaved by looking for the master symlink. Thus:
+# echo -eth0 > /sys/class/net/eth0/master/bonding/slaves
+will free eth0 from whatever bond it is enslaved to, regardless of
+the name of the bond interface.
+
+Changing a Bond's Configuration
+-------------------------------
+ Each bond may be configured individually by manipulating the
+files located in /sys/class/net/<bond name>/bonding
+
+ The names of these files correspond directly with the command-
+line parameters described elsewhere in in this file, and, with the
+exception of arp_ip_target, they accept the same values. To see the
+current setting, simply cat the appropriate file.
+
+ A few examples will be given here; for specific usage
+guidelines for each parameter, see the appropriate section in this
+document.
+
+To configure bond0 for balance-alb mode:
+# ifconfig bond0 down
+# echo 6 > /sys/class/net/bond0/bonding/mode
+ - or -
+# echo balance-alb > /sys/class/net/bond0/bonding/mode
+ NOTE: The bond interface must be down before the mode can be
+changed.
+
+To enable MII monitoring on bond0 with a 1 second interval:
+# echo 1000 > /sys/class/net/bond0/bonding/miimon
+ NOTE: If ARP monitoring is enabled, it will disabled when MII
+monitoring is enabled, and vice-versa.
+
+To add ARP targets:
+# echo +192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
+# echo +192.168.0.101 > /sys/class/net/bond0/bonding/arp_ip_target
+ NOTE: up to 10 target addresses may be specified.
+
+To remove an ARP target:
+# echo -192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
+
+Example Configuration
+---------------------
+ We begin with the same example that is shown in section 3.3,
+executed with sysfs, and without using ifenslave.
+
+ To make a simple bond of two e100 devices (presumed to be eth0
+and eth1), and have it persist across reboots, edit the appropriate
+file (/etc/init.d/boot.local or /etc/rc.d/rc.local), and add the
+following:
+
+modprobe bonding
+modprobe e100
+echo balance-alb > /sys/class/net/bond0/bonding/mode
+ifconfig bond0 192.168.1.1 netmask 255.255.255.0 up
+echo 100 > /sys/class/net/bond0/bonding/miimon
+echo +eth0 > /sys/class/net/bond0/bonding/slaves
+echo +eth1 > /sys/class/net/bond0/bonding/slaves
+
+ To add a second bond, with two e1000 interfaces in
+active-backup mode, using ARP monitoring, add the following lines to
+your init script:
+
+modprobe e1000
+echo +bond1 > /sys/class/net/bonding_masters
+echo active-backup > /sys/class/net/bond1/bonding/mode
+ifconfig bond1 192.168.2.1 netmask 255.255.255.0 up
+echo +192.168.2.100 /sys/class/net/bond1/bonding/arp_ip_target
+echo 2000 > /sys/class/net/bond1/bonding/arp_interval
+echo +eth2 > /sys/class/net/bond1/bonding/slaves
+echo +eth3 > /sys/class/net/bond1/bonding/slaves
+
-5. Querying Bonding Configuration
+4. Querying Bonding Configuration
=================================
-5.1 Bonding Configuration
+4.1 Bonding Configuration
-------------------------
Each bonding device has a read-only file residing in the
@@ -923,7 +1058,7 @@ generally as follows:
The precise format and contents will change depending upon the
bonding configuration, state, and version of the bonding driver.
-5.2 Network configuration
+4.2 Network configuration
-------------------------
The network configuration can be inspected using the ifconfig
@@ -958,7 +1093,7 @@ eth1 Link encap:Ethernet HWaddr 00:C0:F0:1F:37:B4
collisions:0 txqueuelen:100
Interrupt:9 Base address:0x1400
-6. Switch Configuration
+5. Switch Configuration
=======================
For this section, "switch" refers to whatever system the
@@ -991,7 +1126,7 @@ transmit policy for an EtherChannel group; all three will interoperate
with another EtherChannel group.
-7. 802.1q VLAN Support
+6. 802.1q VLAN Support
======================
It is possible to configure VLAN devices over a bond interface
@@ -1042,7 +1177,7 @@ underlying device -- i.e. the bonding interface -- to promiscuous
mode, which might not be what you want.
-8. Link Monitoring
+7. Link Monitoring
==================
The bonding driver at present supports two schemes for
@@ -1053,7 +1188,7 @@ monitor.
bonding driver itself, it is not possible to enable both ARP and MII
monitoring simultaneously.
-8.1 ARP Monitor Operation
+7.1 ARP Monitor Operation
-------------------------
The ARP monitor operates as its name suggests: it sends ARP
@@ -1071,7 +1206,7 @@ those slaves will stay down. If networking monitoring (tcpdump, etc)
shows the ARP requests and replies on the network, then it may be that
your device driver is not updating last_rx and trans_start.
-8.2 Configuring Multiple ARP Targets
+7.2 Configuring Multiple ARP Targets
------------------------------------
While ARP monitoring can be done with just one target, it can
@@ -1094,7 +1229,7 @@ alias bond0 bonding
options bond0 arp_interval=60 arp_ip_target=192.168.0.100
-8.3 MII Monitor Operation
+7.3 MII Monitor Operation
-------------------------
The MII monitor monitors only the carrier state of the local
@@ -1120,14 +1255,14 @@ does not support or had some error in processing both the MII register
and ethtool requests), then the MII monitor will assume the link is
up.
-9. Potential Sources of Trouble
+8. Potential Sources of Trouble
===============================
-9.1 Adventures in Routing
+8.1 Adventures in Routing
-------------------------
When bonding is configured, it is important that the slave
-devices not have routes that supercede routes of the master (or,
+devices not have routes that supersede routes of the master (or,
generally, not have routes at all). For example, suppose the bonding
device bond0 has two slaves, eth0 and eth1, and the routing table is
as follows:
@@ -1154,11 +1289,11 @@ by the state of the routing table.
The solution here is simply to insure that slaves do not have
routes of their own, and if for some reason they must, those routes do
-not supercede routes of their master. This should generally be the
+not supersede routes of their master. This should generally be the
case, but unusual configurations or errant manual or automatic static
route additions may cause trouble.
-9.2 Ethernet Device Renaming
+8.2 Ethernet Device Renaming
----------------------------
On systems with network configuration scripts that do not
@@ -1207,7 +1342,7 @@ modprobe with --ignore-install to cause the normal action to then take
place. Full documentation on this can be found in the modprobe.conf
and modprobe manual pages.
-9.3. Painfully Slow Or No Failed Link Detection By Miimon
+8.3. Painfully Slow Or No Failed Link Detection By Miimon
---------------------------------------------------------
By default, bonding enables the use_carrier option, which
@@ -1235,7 +1370,7 @@ carrier state. It has no way to determine the state of devices on or
beyond other ports of a switch, or if a switch is refusing to pass
traffic while still maintaining carrier on.
-10. SNMP agents
+9. SNMP agents
===============
If running SNMP agents, the bonding driver should be loaded
@@ -1281,7 +1416,7 @@ ifDescr, the association between the IP address and IfIndex remains
and SNMP functions such as Interface_Scan_Next will report that
association.
-11. Promiscuous mode
+10. Promiscuous mode
====================
When running network monitoring tools, e.g., tcpdump, it is
@@ -1308,7 +1443,7 @@ sending to peers that are unassigned or if the load is unbalanced.
the active slave changes (e.g., due to a link failure), the
promiscuous setting will be propagated to the new active slave.
-12. Configuring Bonding for High Availability
+11. Configuring Bonding for High Availability
=============================================
High Availability refers to configurations that provide
@@ -1318,7 +1453,7 @@ goal is to provide the maximum availability of network connectivity
(i.e., the network always works), even though other configurations
could provide higher throughput.
-12.1 High Availability in a Single Switch Topology
+11.1 High Availability in a Single Switch Topology
--------------------------------------------------
If two hosts (or a host and a single switch) are directly
@@ -1332,7 +1467,7 @@ the load will be rebalanced across the remaining devices.
See Section 13, "Configuring Bonding for Maximum Throughput"
for information on configuring bonding with one peer device.
-12.2 High Availability in a Multiple Switch Topology
+11.2 High Availability in a Multiple Switch Topology
----------------------------------------------------
With multiple switches, the configuration of bonding and the
@@ -1359,7 +1494,7 @@ switches (ISL, or inter switch link), and multiple ports connecting to
the outside world ("port3" on each switch). There is no technical
reason that this could not be extended to a third switch.
-12.2.1 HA Bonding Mode Selection for Multiple Switch Topology
+11.2.1 HA Bonding Mode Selection for Multiple Switch Topology
-------------------------------------------------------------
In a topology such as the example above, the active-backup and
@@ -1381,7 +1516,7 @@ broadcast: This mode is really a special purpose mode, and is suitable
necessary for some specific one-way traffic to reach both
independent networks, then the broadcast mode may be suitable.
-12.2.2 HA Link Monitoring Selection for Multiple Switch Topology
+11.2.2 HA Link Monitoring Selection for Multiple Switch Topology
----------------------------------------------------------------
The choice of link monitoring ultimately depends upon your
@@ -1402,10 +1537,10 @@ regardless of which switch is active, the ARP monitor has a suitable
target to query.
-13. Configuring Bonding for Maximum Throughput
+12. Configuring Bonding for Maximum Throughput
==============================================
-13.1 Maximizing Throughput in a Single Switch Topology
+12.1 Maximizing Throughput in a Single Switch Topology
------------------------------------------------------
In a single switch configuration, the best method to maximize
@@ -1476,7 +1611,7 @@ destination to make load balancing decisions. The behavior of each
mode is described below.
-13.1.1 MT Bonding Mode Selection for Single Switch Topology
+12.1.1 MT Bonding Mode Selection for Single Switch Topology
-----------------------------------------------------------
This configuration is the easiest to set up and to understand,
@@ -1607,7 +1742,7 @@ balance-alb: This mode is everything that balance-tlb is, and more.
device driver must support changing the hardware address while
the device is open.
-13.1.2 MT Link Monitoring for Single Switch Topology
+12.1.2 MT Link Monitoring for Single Switch Topology
----------------------------------------------------
The choice of link monitoring may largely depend upon which
@@ -1616,7 +1751,7 @@ support the use of the ARP monitor, and are thus restricted to using
the MII monitor (which does not provide as high a level of end to end
assurance as the ARP monitor).
-13.2 Maximum Throughput in a Multiple Switch Topology
+12.2 Maximum Throughput in a Multiple Switch Topology
-----------------------------------------------------
Multiple switches may be utilized to optimize for throughput
@@ -1651,7 +1786,7 @@ a single 72 port switch.
can be equipped with an additional network device connected to an
external network; this host then additionally acts as a gateway.
-13.2.1 MT Bonding Mode Selection for Multiple Switch Topology
+12.2.1 MT Bonding Mode Selection for Multiple Switch Topology
-------------------------------------------------------------
In actual practice, the bonding mode typically employed in
@@ -1664,7 +1799,7 @@ packets has arrived). When employed in this fashion, the balance-rr
mode allows individual connections between two hosts to effectively
utilize greater than one interface's bandwidth.
-13.2.2 MT Link Monitoring for Multiple Switch Topology
+12.2.2 MT Link Monitoring for Multiple Switch Topology
------------------------------------------------------
Again, in actual practice, the MII monitor is most often used
@@ -1674,10 +1809,10 @@ advantages over the MII monitor are mitigated by the volume of probes
needed as the number of systems involved grows (remember that each
host in the network is configured with bonding).
-14. Switch Behavior Issues
+13. Switch Behavior Issues
==========================
-14.1 Link Establishment and Failover Delays
+13.1 Link Establishment and Failover Delays
-------------------------------------------
Some switches exhibit undesirable behavior with regard to the
@@ -1712,7 +1847,7 @@ switches take a long time to go into backup mode, it may be desirable
to not activate a backup interface immediately after a link goes down.
Failover may be delayed via the downdelay bonding module option.
-14.2 Duplicated Incoming Packets
+13.2 Duplicated Incoming Packets
--------------------------------
It is not uncommon to observe a short burst of duplicated
@@ -1751,14 +1886,14 @@ behavior, it can be induced by clearing the MAC forwarding table (on
most Cisco switches, the privileged command "clear mac address-table
dynamic" will accomplish this).
-15. Hardware Specific Considerations
+14. Hardware Specific Considerations
====================================
This section contains additional information for configuring
bonding on specific hardware platforms, or for interfacing bonding
with particular switches or other devices.
-15.1 IBM BladeCenter
+14.1 IBM BladeCenter
--------------------
This applies to the JS20 and similar systems.
@@ -1861,7 +1996,7 @@ bonding driver.
avoid fail-over delay issues when using bonding.
-16. Frequently Asked Questions
+15. Frequently Asked Questions
==============================
1. Is it SMP safe?
@@ -1925,7 +2060,7 @@ not have special switch requirements, but do need device drivers that
support specific features (described in the appropriate section under
module parameters, above).
- In 802.3ad mode, it works with with systems that support IEEE
+ In 802.3ad mode, it works with systems that support IEEE
802.3ad Dynamic Link Aggregation. Most managed and many unmanaged
switches currently available support 802.3ad.
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index f12007b80a46..d46338af6002 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -362,6 +362,13 @@ tcp_workaround_signed_windows - BOOLEAN
not receive a window scaling option from them.
Default: 0
+tcp_slow_start_after_idle - BOOLEAN
+ If set, provide RFC2861 behavior and time out the congestion
+ window after an idle period. An idle period is defined at
+ the current RTO. If unset, the congestion window will not
+ be timed out after an idle period.
+ Default: 1
+
IP Variables:
ip_local_port_range - 2 INTEGERS
diff --git a/Documentation/networking/netdevices.txt b/Documentation/networking/netdevices.txt
index 3c0a5ba614d7..847cedb238f6 100644
--- a/Documentation/networking/netdevices.txt
+++ b/Documentation/networking/netdevices.txt
@@ -42,9 +42,9 @@ dev->get_stats:
Context: nominally process, but don't sleep inside an rwlock
dev->hard_start_xmit:
- Synchronization: dev->xmit_lock spinlock.
+ Synchronization: netif_tx_lock spinlock.
When the driver sets NETIF_F_LLTX in dev->features this will be
- called without holding xmit_lock. In this case the driver
+ called without holding netif_tx_lock. In this case the driver
has to lock by itself when needed. It is recommended to use a try lock
for this and return -1 when the spin lock fails.
The locking there should also properly protect against
@@ -62,12 +62,12 @@ dev->hard_start_xmit:
Only valid when NETIF_F_LLTX is set.
dev->tx_timeout:
- Synchronization: dev->xmit_lock spinlock.
+ Synchronization: netif_tx_lock spinlock.
Context: BHs disabled
Notes: netif_queue_stopped() is guaranteed true
dev->set_multicast_list:
- Synchronization: dev->xmit_lock spinlock.
+ Synchronization: netif_tx_lock spinlock.
Context: BHs disabled
dev->poll:
diff --git a/MAINTAINERS b/MAINTAINERS
index c3c5842402df..854a152e5e95 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1425,6 +1425,8 @@ P: Jesse Brandeburg
M: jesse.brandeburg@intel.com
P: Jeff Kirsher
M: jeffrey.t.kirsher@intel.com
+P: Auke Kok
+M: auke-jan.h.kok@intel.com
W: http://sourceforge.net/projects/e1000/
S: Supported
@@ -1437,6 +1439,8 @@ P: Jesse Brandeburg
M: jesse.brandeburg@intel.com
P: Jeff Kirsher
M: jeffrey.t.kirsher@intel.com
+P: Auke Kok
+M: auke-jan.h.kok@intel.com
W: http://sourceforge.net/projects/e1000/
S: Supported
@@ -1449,6 +1453,8 @@ P: John Ronciak
M: john.ronciak@intel.com
P: Jesse Brandeburg
M: jesse.brandeburg@intel.com
+P: Auke Kok
+M: auke-jan.h.kok@intel.com
W: http://sourceforge.net/projects/e1000/
S: Supported
@@ -1889,7 +1895,7 @@ L: linux-kernel@vger.kernel.org
W: http://www.atnf.csiro.au/~rgooch/linux/kernel-patches.html
S: Maintained
-MULTIMEDIA CARD SUBSYSTEM
+MULTIMEDIA CARD (MMC) SUBSYSTEM
P: Russell King
M: rmk+mmc@arm.linux.org.uk
S: Maintained
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 08b7cc900cae..f47cf9af3bc8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -270,6 +270,11 @@ config ARCH_AT91RM9200
Say Y here if you intend to run this kernel on an Atmel
AT91RM9200-based board.
+config ARCH_PNX4008
+ bool "Philips Nexperia PNX4008 Mobile"
+ help
+ This enables support for Philips PNX4008 mobile platform.
+
endchoice
source "arch/arm/mach-clps711x/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 6f8e84c1c1f2..6c97aa70d3bc 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -116,6 +116,7 @@ endif
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
+ machine-$(CONFIG_ARCH_PNX4008) := pnx4008
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index b56f5e691d65..23016f6aa645 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -605,8 +605,8 @@ proc_types:
b __armv4_mmu_cache_off
b __armv4_mmu_cache_flush
- .word 0x00070000 @ ARMv6
- .word 0x000f0000
+ .word 0x0007b000 @ ARMv6
+ .word 0x0007f000
b __armv4_mmu_cache_on
b __armv4_mmu_cache_off
b __armv6_mmu_cache_flush
diff --git a/arch/arm/configs/lpd7a400_defconfig b/arch/arm/configs/lpd7a400_defconfig
index 67eaa26c2647..bf9cf9c6d2df 100644
--- a/arch/arm/configs/lpd7a400_defconfig
+++ b/arch/arm/configs/lpd7a400_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:06:33 2005
+# Linux kernel version: 2.6.12
+# Thu Nov 3 14:15:32 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -17,6 +17,7 @@ CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -36,6 +37,8 @@ CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
@@ -71,6 +74,7 @@ CONFIG_BASE_SMALL=0
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7952X is not set
CONFIG_ARCH_LH7A40X=y
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
@@ -84,6 +88,7 @@ CONFIG_ARCH_LH7A40X=y
CONFIG_MACH_LPD7A400=y
# CONFIG_MACH_LPD7A404 is not set
CONFIG_ARCH_LH7A400=y
+CONFIG_LPD7A40X_CPLD_SSP=y
# CONFIG_LH7A40X_CONTIGMEM is not set
# CONFIG_LH7A40X_ONE_BANK_PER_NODE is not set
@@ -110,6 +115,8 @@ CONFIG_ARM_THUMB=y
#
# Bus support
#
+CONFIG_ARM_AMBA=y
+CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
@@ -119,6 +126,7 @@ CONFIG_ARM_THUMB=y
#
# Kernel Features
#
+# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_DISCONTIGMEM=y
CONFIG_ALIGNMENT_TRAP=y
@@ -175,7 +183,7 @@ CONFIG_MTD=y
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
#
@@ -217,7 +225,10 @@ CONFIG_MTD_CFI_UTIL=y
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x04000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_EDB7312 is not set
@@ -254,7 +265,6 @@ CONFIG_MTD_CFI_UTIL=y
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -288,13 +298,15 @@ CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_POLL=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+CONFIG_IDE_ARM=y
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
@@ -302,7 +314,37 @@ CONFIG_IDE_GENERIC=y
#
# SCSI device support
#
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
@@ -331,7 +373,6 @@ CONFIG_NET=y
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -438,13 +479,10 @@ CONFIG_INPUT=y
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
@@ -453,7 +491,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_TOUCHSCREEN_ADS7843_LH7=y
+CONFIG_HAS_TOUCHSCREEN_ADS7843_LH7=y
# CONFIG_INPUT_MISC is not set
#
@@ -461,7 +505,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@@ -479,6 +522,8 @@ CONFIG_HW_CONSOLE=y
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_LH7A40X=y
@@ -510,7 +555,6 @@ CONFIG_RTC=y
#
# TPM devices
#
-# CONFIG_TCG_TPM is not set
#
# I2C support
@@ -534,18 +578,73 @@ CONFIG_RTC=y
#
# Graphics support
#
-# CONFIG_FB is not set
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_ARMCLCD=y
+CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT=y
+# CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02 is not set
+# CONFIG_FB_ARMCLCD_SHARP_LQ64D343 is not set
+# CONFIG_FB_ARMCLCD_SHARP_LQ10D368 is not set
+# CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=y
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_LH7A40X_AC97=y
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
#
# USB support
diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig
index 208d591ebfce..3a57be32e849 100644
--- a/arch/arm/configs/lpd7a404_defconfig
+++ b/arch/arm/configs/lpd7a404_defconfig
@@ -1,52 +1,58 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:14:08 2005
+# Linux kernel version: 2.6.16
+# Thu Mar 23 17:50:31 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@@ -54,6 +60,23 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
@@ -71,11 +94,15 @@ CONFIG_BASE_SMALL=0
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7952X is not set
CONFIG_ARCH_LH7A40X=y
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
#
# LH7A40X Implementations
@@ -110,6 +137,7 @@ CONFIG_ARM_THUMB=y
#
# Bus support
#
+CONFIG_ARM_AMBA=y
#
# PCCARD (PCMCIA/CardBus) support
@@ -120,7 +148,18 @@ CONFIG_ARM_THUMB=y
# Kernel Features
#
CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_AEABI is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
@@ -154,6 +193,84 @@ CONFIG_BINFMT_ELF=y
# Power management options
#
# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -168,6 +285,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
@@ -175,7 +297,7 @@ CONFIG_MTD=y
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
#
@@ -186,6 +308,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@@ -211,15 +334,18 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x04000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
@@ -243,6 +369,11 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_NAND is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
@@ -254,7 +385,6 @@ CONFIG_MTD_CFI_UTIL=y
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -262,16 +392,7 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
@@ -291,12 +412,13 @@ CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_POLL=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+CONFIG_IDE_ARM=y
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
@@ -304,6 +426,7 @@ CONFIG_IDE_GENERIC=y
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
@@ -315,6 +438,7 @@ CONFIG_SCSI=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -329,10 +453,12 @@ CONFIG_SCSI=y
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
@@ -344,6 +470,7 @@ CONFIG_SCSI=y
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -354,70 +481,8 @@ CONFIG_SCSI=y
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -425,11 +490,17 @@ CONFIG_NETDEVICES=y
# CONFIG_TUN is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
#
# Ethernet (1000 Mbit)
@@ -456,6 +527,8 @@ CONFIG_SMC91X=y
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -470,10 +543,13 @@ CONFIG_INPUT=y
#
# Userland interfaces
#
-# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
@@ -482,7 +558,13 @@ CONFIG_INPUT=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_TOUCHSCREEN_ADC_LH7=y
+CONFIG_HAS_TOUCHSCREEN_ADC_LH7=y
# CONFIG_INPUT_MISC is not set
#
@@ -490,7 +572,6 @@ CONFIG_INPUT=y
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@@ -508,6 +589,8 @@ CONFIG_HW_CONSOLE=y
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_LH7A40X=y
@@ -533,13 +616,13 @@ CONFIG_RTC=y
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -547,10 +630,33 @@ CONFIG_RTC=y
# CONFIG_I2C is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -563,18 +669,83 @@ CONFIG_RTC=y
#
# Graphics support
#
-# CONFIG_FB is not set
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_ARMCLCD=y
+CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT=y
+# CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02 is not set
+# CONFIG_FB_ARMCLCD_SHARP_LQ64D343 is not set
+# CONFIG_FB_ARMCLCD_SHARP_LQ10D368 is not set
+# CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41 is not set
+# CONFIG_FB_ARMCLCD_AUO_A070VW01_WIDE is not set
+# CONFIG_FB_ARMCLCD_HITACHI is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_ARMAACI is not set
+CONFIG_SND_LH7A40X_AC97=y
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
#
# USB support
@@ -595,6 +766,7 @@ CONFIG_USB_DEVICEFS=y
#
# USB Host Controller Drivers
#
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -603,16 +775,19 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# USB Device Class drivers
#
-# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_RW_DETECT is not set
CONFIG_USB_STORAGE_DATAFAB=y
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
@@ -621,22 +796,32 @@ CONFIG_USB_STORAGE_DATAFAB=y
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
@@ -686,16 +871,33 @@ CONFIG_USB_MON=y
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
#
# USB Gadget Support
#
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_LH7=y
+CONFIG_USB_LH7=y
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=y
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
#
# MMC/SD Card support
@@ -707,6 +909,7 @@ CONFIG_USB_MON=y
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -716,17 +919,17 @@ CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -749,12 +952,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -769,8 +971,8 @@ CONFIG_RAMFS=y
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@@ -787,12 +989,14 @@ CONFIG_CRAMFS=y
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -801,6 +1005,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -820,6 +1025,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@@ -875,19 +1081,24 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
@@ -912,6 +1123,7 @@ CONFIG_DEBUG_ERRORS=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig
new file mode 100644
index 000000000000..8a078d479d57
--- /dev/null
+++ b/arch/arm/configs/pnx4008_defconfig
@@ -0,0 +1,2072 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17-rc1
+# Thu Apr 6 17:05:58 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=m
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_PNX4008=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_APM=m
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=m
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+CONFIG_IP_NF_QUEUE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+
+#
+# DECnet: Netfilter Configuration
+#
+CONFIG_DECNET_NF_GRABULATOR=m
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+# CONFIG_BRIDGE_EBT_ULOG is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+CONFIG_ATM=y
+CONFIG_ATM_CLIP=y
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+CONFIG_X25=m
+CONFIG_LAPB=m
+# CONFIG_NET_DIVERT is not set
+CONFIG_ECONET=m
+CONFIG_ECONET_AUNUDP=y
+CONFIG_ECONET_NATIVE=y
+CONFIG_WAN_ROUTER=m
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_BAYCOM_EPP=m
+CONFIG_YAM=m
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRDA_DEBUG=y
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+# CONFIG_TOIM3232_DONGLE is not set
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+
+#
+# Old SIR device drivers
+#
+CONFIG_IRPORT_SIR=m
+
+#
+# Old Serial dongle support
+#
+# CONFIG_DONGLE_OLD is not set
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBPA10X is not set
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+# CONFIG_IEEE80211_CRYPT_WEP is not set
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=m
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=m
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLKMTD=m
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+CONFIG_MTD_DOC2000=m
+CONFIG_MTD_DOC2001=m
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+# CONFIG_MTD_DOCPROBE_ADVANCED is not set
+CONFIG_MTD_DOCPROBE_ADDRESS=0
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_PC_FIFO=y
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+CONFIG_PARPORT_NOT_PC=y
+# CONFIG_PARPORT_ARC is not set
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_1284=y
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+CONFIG_PARIDE=m
+CONFIG_PARIDE_PARPORT=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+# CONFIG_PARIDE_EPATC8 is not set
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=m
+CONFIG_BLK_DEV_IDE=m
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=m
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=m
+CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDETAPE=m
+CONFIG_BLK_DEV_IDEFLOPPY=m
+CONFIG_BLK_DEV_IDESCSI=m
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=m
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+CONFIG_SCSI_SATA=m
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_DEBUG=m
+
+#
+# PCMCIA SCSI adapter support
+#
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_NINJA_SCSI=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID5=m
+# CONFIG_MD_RAID5_RESHAPE is not set
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NET_POCKET=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+CONFIG_STRIP=m
+CONFIG_PCMCIA_WAVELAN=m
+CONFIG_PCMCIA_NETWAVE=m
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+CONFIG_PCMCIA_RAYCS=m
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+CONFIG_ATMEL=m
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_PCMCIA_WL3501=m
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_PCMCIA_AXNET=m
+
+#
+# Wan interfaces
+#
+CONFIG_WAN=y
+CONFIG_SYNCLINK_SYNCPPP=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=y
+CONFIG_HDLC_RAW_ETH=y
+CONFIG_HDLC_CISCO=y
+CONFIG_HDLC_FR=y
+CONFIG_HDLC_PPP=y
+CONFIG_HDLC_X25=y
+CONFIG_DLCI=m
+CONFIG_DLCI_COUNT=24
+CONFIG_DLCI_MAX=8
+CONFIG_WAN_ROUTER_DRIVERS=y
+CONFIG_LAPBETHER=m
+CONFIG_X25_ASY=m
+
+#
+# ATM drivers
+#
+# CONFIG_ATM_DUMMY is not set
+CONFIG_ATM_TCP=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_SHAPER=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+
+#
+# ISDN subsystem
+#
+CONFIG_ISDN=m
+
+#
+# Old ISDN4Linux
+#
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+CONFIG_ISDN_X25=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DRV_LOOP=m
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+# CONFIG_HISAX_NO_SENDCOMPLETE is not set
+# CONFIG_HISAX_NO_LLC is not set
+# CONFIG_HISAX_NO_KEYPAD is not set
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_SX=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+# CONFIG_HISAX_HFC4S8S is not set
+CONFIG_HISAX_HDLC=y
+
+#
+# Active cards
+#
+
+#
+# Siemens Gigaset
+#
+# CONFIG_ISDN_DRV_GIGASET is not set
+
+#
+# CAPI subsystem
+#
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
+CONFIG_ISDN_CAPI_CAPIFS=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+
+#
+# Active AVM cards
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+
+#
+# Active Eicon DIVA Server cards
+#
+CONFIG_CAPI_EICON=y
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_TSDEV=m
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_LKKBD=m
+CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_NEWTON=m
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+# CONFIG_JOYSTICK_TWIDJOY is not set
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_GUNZE=m
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_COMPUTONE=m
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+CONFIG_DIGIEPCA=m
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+# CONFIG_ISI is not set
+CONFIG_SYNCLINKMP=m
+CONFIG_N_HDLC=m
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+CONFIG_SX=m
+CONFIG_RIO=m
+CONFIG_RIO_OLDPCI=y
+CONFIG_STALDRV=y
+CONFIG_STALLION=m
+CONFIG_ISTALLION=m
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_PRINTER=m
+# CONFIG_LP_CONSOLE is not set
+CONFIG_PPDEV=m
+CONFIG_TIPAR=m
+
+#
+# IPMI
+#
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_NVRAM=m
+CONFIG_DTLK=m
+CONFIG_R3964=m
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCF=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_ISA=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_STUB=m
+CONFIG_I2C_PCA_ISA=m
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+# CONFIG_SENSORS_PCA9539 is not set
+CONFIG_SENSORS_PCF8591=m
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+CONFIG_W1=m
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS9490 is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1031=m
+# CONFIG_SENSORS_ADM9240 is not set
+CONFIG_SENSORS_ASB100=m
+# CONFIG_SENSORS_ATXP1 is not set
+CONFIG_SENSORS_DS1621=m
+# CONFIG_SENSORS_F71805F is not set
+CONFIG_SENSORS_FSCHER=m
+# CONFIG_SENSORS_FSCPOS is not set
+CONFIG_SENSORS_GL518SM=m
+# CONFIG_SENSORS_GL520SM is not set
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+# CONFIG_SENSORS_LM92 is not set
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_SMSC47M1=m
+# CONFIG_SENSORS_SMSC47B397 is not set
+CONFIG_SENSORS_W83781D=m
+# CONFIG_SENSORS_W83792D is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83627HF=m
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+CONFIG_DVB=y
+CONFIG_DVB_CORE=m
+
+#
+# Supported USB Adapters
+#
+# CONFIG_DVB_USB is not set
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_DVB_CINERGYT2=m
+CONFIG_DVB_CINERGYT2_TUNING=y
+CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
+CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
+CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
+CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
+CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_CX24110=m
+# CONFIG_DVB_CX24123 is not set
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_VES1X93=m
+# CONFIG_DVB_S5H1420 is not set
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+# CONFIG_DVB_ZL10353 is not set
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terresterial DTV) frontends
+#
+# CONFIG_DVB_NXT200X is not set
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+# CONFIG_DVB_BCM3510 is not set
+# CONFIG_DVB_LGDT330X is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+
+#
+# ALSA ARM devices
+#
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+
+#
+# PCMCIA devices
+#
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=m
+# CONFIG_OBSOLETE_OSS_DRIVER is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+CONFIG_SOUND_TVMIXER=m
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_BANDWIDTH=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_CS is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+CONFIG_USB_AIPTEK=m
+CONFIG_USB_WACOM=m
+# CONFIG_USB_ACECAD is not set
+CONFIG_USB_KBTAB=m
+CONFIG_USB_POWERMATE=m
+CONFIG_USB_MTOUCH=m
+# CONFIG_USB_ITMTOUCH is not set
+CONFIG_USB_EGALAX=m
+# CONFIG_USB_YEALINK is not set
+CONFIG_USB_XPAD=m
+CONFIG_USB_ATI_REMOTE=m
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+# CONFIG_USB_SERIAL_GARMIN is not set
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_TI is not set
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETSERVO=m
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+CONFIG_USB_TEST=m
+
+#
+# USB DSL modem support
+#
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+# CONFIG_USB_CXACRU is not set
+# CONFIG_USB_UEAGLEATM is not set
+# CONFIG_USB_XUSBATM is not set
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_DUMMY_HCD=y
+CONFIG_USB_DUMMY_HCD=m
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=m
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+CONFIG_JFS_STATISTICS=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_SECURITY=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+# CONFIG_OCFS2_FS is not set
+CONFIG_MINIX_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
+CONFIG_QUOTA=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=m
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS_FS=m
+CONFIG_JFFS_FS_VERBOSE=0
+CONFIG_JFFS_PROC_FS=y
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+CONFIG_VXFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_RPCSEC_GSS_SPKM3=m
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+# CONFIG_NCPFS_SMALLDOS is not set
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+# CONFIG_CODA_FS_OLD_API is not set
+CONFIG_AFS_FS=m
+CONFIG_RXRPC=m
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ACORN_PARTITION=y
+# CONFIG_ACORN_PARTITION_CUMANA is not set
+# CONFIG_ACORN_PARTITION_EESOX is not set
+CONFIG_ACORN_PARTITION_ICS=y
+# CONFIG_ACORN_PARTITION_ADFS is not set
+# CONFIG_ACORN_PARTITION_POWERTEC is not set
+CONFIG_ACORN_PARTITION_RISCIX=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+# CONFIG_LDM_DEBUG is not set
+CONFIG_SGI_PARTITION=y
+CONFIG_ULTRIX_PARTITION=y
+CONFIG_SUN_PARTITION=y
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=m
+CONFIG_SECURITY_ROOTPLUG=m
+CONFIG_SECURITY_SECLVL=m
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index dbcb11a31f78..b5bcebca1cd6 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -271,7 +271,7 @@ ENTRY(sys_call_table)
@ r8 = syscall table
.type sys_syscall, #function
sys_syscall:
- eor scno, r0, #__NR_OABI_SYSCALL_BASE
+ bic scno, r0, #__NR_OABI_SYSCALL_BASE
cmp scno, #__NR_syscall - __NR_SYSCALL_BASE
cmpne scno, #NR_syscalls @ check range
stmloia sp, {r5, r6} @ shuffle args
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 2d5896b36181..bcc19fbb32df 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -342,10 +342,10 @@ __do_irq(unsigned int irq, struct irqaction *action, struct pt_regs *regs)
#ifdef CONFIG_NO_IDLE_HZ
if (!(action->flags & SA_TIMER) && system_timer->dyn_tick != NULL) {
- write_seqlock(&xtime_lock);
+ spin_lock(&system_timer->dyn_tick->lock);
if (system_timer->dyn_tick->state & DYN_TICK_ENABLED)
system_timer->dyn_tick->handler(irq, 0, regs);
- write_sequnlock(&xtime_lock);
+ spin_unlock(&system_timer->dyn_tick->lock);
}
#endif
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index d6bd435a6857..9c12d4fefbd3 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -379,7 +379,7 @@ static int timer_dyn_tick_enable(void)
int ret = -ENODEV;
if (dyn_tick) {
- write_seqlock_irqsave(&xtime_lock, flags);
+ spin_lock_irqsave(&dyn_tick->lock, flags);
ret = 0;
if (!(dyn_tick->state & DYN_TICK_ENABLED)) {
ret = dyn_tick->enable();
@@ -387,7 +387,7 @@ static int timer_dyn_tick_enable(void)
if (ret == 0)
dyn_tick->state |= DYN_TICK_ENABLED;
}
- write_sequnlock_irqrestore(&xtime_lock, flags);
+ spin_unlock_irqrestore(&dyn_tick->lock, flags);
}
return ret;
@@ -400,7 +400,7 @@ static int timer_dyn_tick_disable(void)
int ret = -ENODEV;
if (dyn_tick) {
- write_seqlock_irqsave(&xtime_lock, flags);
+ spin_lock_irqsave(&dyn_tick->lock, flags);
ret = 0;
if (dyn_tick->state & DYN_TICK_ENABLED) {
ret = dyn_tick->disable();
@@ -408,7 +408,7 @@ static int timer_dyn_tick_disable(void)
if (ret == 0)
dyn_tick->state &= ~DYN_TICK_ENABLED;
}
- write_sequnlock_irqrestore(&xtime_lock, flags);
+ spin_unlock_irqrestore(&dyn_tick->lock, flags);
}
return ret;
@@ -422,15 +422,20 @@ static int timer_dyn_tick_disable(void)
void timer_dyn_reprogram(void)
{
struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
- unsigned long next, seq;
+ unsigned long next, seq, flags;
- if (dyn_tick && (dyn_tick->state & DYN_TICK_ENABLED)) {
+ if (!dyn_tick)
+ return;
+
+ spin_lock_irqsave(&dyn_tick->lock, flags);
+ if (dyn_tick->state & DYN_TICK_ENABLED) {
next = next_timer_interrupt();
do {
seq = read_seqbegin(&xtime_lock);
- dyn_tick->reprogram(next_timer_interrupt() - jiffies);
+ dyn_tick->reprogram(next - jiffies);
} while (read_seqretry(&xtime_lock, seq));
}
+ spin_unlock_irqrestore(&dyn_tick->lock, flags);
}
static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf)
@@ -499,5 +504,10 @@ void __init time_init(void)
if (system_timer->offset == NULL)
system_timer->offset = dummy_gettimeoffset;
system_timer->init();
+
+#ifdef CONFIG_NO_IDLE_HZ
+ if (system_timer->dyn_tick)
+ system_timer->dyn_tick->lock = SPIN_LOCK_UNLOCKED;
+#endif
}
diff --git a/arch/arm/mach-lh7a40x/Kconfig b/arch/arm/mach-lh7a40x/Kconfig
index 8a17867a6a24..558a34f53b1c 100644
--- a/arch/arm/mach-lh7a40x/Kconfig
+++ b/arch/arm/mach-lh7a40x/Kconfig
@@ -14,6 +14,7 @@ config MACH_LPD7A400
bool "LPD7A400 Card Engine"
select ARCH_LH7A400
# select IDE_POLL
+ select HAS_TOUCHSCREEN_ADS7843_LH7
help
Say Y here if you are using Logic Product Development's
LPD7A400 CardEngine. For the time being, the LPD7A400 and
@@ -23,6 +24,7 @@ config MACH_LPD7A404
bool "LPD7A404 Card Engine"
select ARCH_LH7A404
# select IDE_POLL
+ select HAS_TOUCHSCREEN_ADC_LH7
help
Say Y here if you are using Logic Product Development's
LPD7A404 CardEngine. For the time being, the LPD7A400 and
@@ -34,6 +36,9 @@ config ARCH_LH7A400
config ARCH_LH7A404
bool
+config LPD7A40X_CPLD_SSP
+ bool
+
config LH7A40X_CONTIGMEM
bool "Disable NUMA Support"
depends on ARCH_LH7A40X
diff --git a/arch/arm/mach-lh7a40x/Makefile b/arch/arm/mach-lh7a40x/Makefile
index e90512dbc2d6..94b8615fb3c3 100644
--- a/arch/arm/mach-lh7a40x/Makefile
+++ b/arch/arm/mach-lh7a40x/Makefile
@@ -4,11 +4,14 @@
# Object file lists.
-obj-y := time.o
-obj-$(CONFIG_MACH_KEV7A400) += arch-kev7a400.o irq-lh7a400.o
-obj-$(CONFIG_MACH_LPD7A400) += arch-lpd7a40x.o irq-lh7a400.o
-obj-$(CONFIG_MACH_LPD7A404) += arch-lpd7a40x.o irq-lh7a404.o
-
-obj-m :=
-obj-n :=
-obj- :=
+obj-y := time.o clocks.o
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_MACH_KEV7A400) += arch-kev7a400.o irq-lh7a400.o
+obj-$(CONFIG_MACH_LPD7A400) += arch-lpd7a40x.o irq-lh7a400.o
+obj-$(CONFIG_MACH_LPD7A404) += arch-lpd7a40x.o irq-lh7a404.o
+obj-$(CONFIG_LPD7A40X_CPLD_SSP) += ssp-cpld.o
+obj-$(CONFIG_FB_ARMCLCD) += clcd.o
+
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index 12e23277c5ea..c0e6854289f1 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -23,6 +23,28 @@
#include "common.h"
+#define CPLD_INT_NETHERNET (1<<0)
+#define CPLD_INTMASK_ETHERNET (1<<2)
+#if defined (CONFIG_MACH_LPD7A400)
+# define CPLD_INT_NTOUCH (1<<1)
+# define CPLD_INTMASK_TOUCH (1<<3)
+# define CPLD_INT_PEN (1<<4)
+# define CPLD_INTMASK_PEN (1<<4)
+# define CPLD_INT_PIRQ (1<<4)
+#endif
+#define CPLD_INTMASK_CPLD (1<<7)
+#define CPLD_INT_CPLD (1<<6)
+
+#define CPLD_CONTROL_SWINT (1<<7) /* Disable all CPLD IRQs */
+#define CPLD_CONTROL_OCMSK (1<<6) /* Mask USB1 connect IRQ */
+#define CPLD_CONTROL_PDRV (1<<5) /* PCC_nDRV high */
+#define CPLD_CONTROL_USB1C (1<<4) /* USB1 connect IRQ active */
+#define CPLD_CONTROL_USB1P (1<<3) /* USB1 power disable */
+#define CPLD_CONTROL_AWKP (1<<2) /* Auto-wakeup disabled */
+#define CPLD_CONTROL_LCD_ENABLE (1<<1) /* LCD Vee enable */
+#define CPLD_CONTROL_WRLAN_NENABLE (1<<0) /* SMC91x power disable */
+
+
static struct resource smc91x_resources[] = {
[0] = {
.start = CPLD00_PHYS,
@@ -48,12 +70,12 @@ static struct platform_device smc91x_device = {
static struct resource lh7a40x_usbclient_resources[] = {
[0] = {
.start = USB_PHYS,
- .end = (USB_PHYS + 0xFF),
+ .end = (USB_PHYS + PAGE_SIZE),
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_USBINTR,
- .end = IRQ_USBINTR,
+ .start = IRQ_USB,
+ .end = IRQ_USB,
.flags = IORESOURCE_IRQ,
},
};
@@ -61,7 +83,8 @@ static struct resource lh7a40x_usbclient_resources[] = {
static u64 lh7a40x_usbclient_dma_mask = 0xffffffffUL;
static struct platform_device lh7a40x_usbclient_device = {
- .name = "lh7a40x_udc",
+// .name = "lh7a40x_udc",
+ .name = "lh7-udc",
.id = 0,
.dev = {
.dma_mask = &lh7a40x_usbclient_dma_mask,
@@ -101,7 +124,7 @@ static struct platform_device lh7a404_usbhost_device = {
#endif
-static struct platform_device *lpd7a40x_devs[] __initdata = {
+static struct platform_device* lpd7a40x_devs[] __initdata = {
&smc91x_device,
&lh7a40x_usbclient_device,
#if defined (CONFIG_ARCH_LH7A404)
@@ -113,29 +136,52 @@ extern void lpd7a400_map_io (void);
static void __init lpd7a40x_init (void)
{
- CPLD_CONTROL |= (1<<6); /* Mask USB1 connection IRQ */
+#if defined (CONFIG_MACH_LPD7A400)
+ CPLD_CONTROL |= 0
+ | CPLD_CONTROL_SWINT /* Disable software interrupt */
+ | CPLD_CONTROL_OCMSK; /* Mask USB1 connection IRQ */
CPLD_CONTROL &= ~(0
- | (1<<1) /* Disable LCD */
- | (1<<0) /* Enable WLAN */
+ | CPLD_CONTROL_LCD_ENABLE /* Disable LCD */
+ | CPLD_CONTROL_WRLAN_NENABLE /* Enable SMC91x */
);
+#endif
+
+#if defined (CONFIG_MACH_LPD7A404)
+ CPLD_CONTROL &= ~(0
+ | CPLD_CONTROL_WRLAN_NENABLE /* Enable SMC91x */
+ );
+#endif
platform_add_devices (lpd7a40x_devs, ARRAY_SIZE (lpd7a40x_devs));
+#if defined (CONFIG_FB_ARMCLCD)
+ lh7a40x_clcd_init ();
+#endif
}
static void lh7a40x_ack_cpld_irq (u32 irq)
{
- /* CPLD doesn't have ack capability */
+ /* CPLD doesn't have ack capability, but some devices may */
+
+#if defined (CPLD_INTMASK_TOUCH)
+ /* The touch control *must* mask the the interrupt because the
+ * interrupt bit is read by the driver to determine if the pen
+ * is still down. */
+ if (irq == IRQ_TOUCH)
+ CPLD_INTERRUPTS |= CPLD_INTMASK_TOUCH;
+#endif
}
static void lh7a40x_mask_cpld_irq (u32 irq)
{
switch (irq) {
case IRQ_LPD7A40X_ETH_INT:
- CPLD_INTERRUPTS = CPLD_INTERRUPTS | 0x4;
+ CPLD_INTERRUPTS |= CPLD_INTMASK_ETHERNET;
break;
- case IRQ_LPD7A400_TS:
- CPLD_INTERRUPTS = CPLD_INTERRUPTS | 0x8;
+#if defined (IRQ_TOUCH)
+ case IRQ_TOUCH:
+ CPLD_INTERRUPTS |= CPLD_INTMASK_TOUCH;
break;
+#endif
}
}
@@ -143,11 +189,13 @@ static void lh7a40x_unmask_cpld_irq (u32 irq)
{
switch (irq) {
case IRQ_LPD7A40X_ETH_INT:
- CPLD_INTERRUPTS = CPLD_INTERRUPTS & ~ 0x4;
+ CPLD_INTERRUPTS &= ~CPLD_INTMASK_ETHERNET;
break;
- case IRQ_LPD7A400_TS:
- CPLD_INTERRUPTS = CPLD_INTERRUPTS & ~ 0x8;
+#if defined (IRQ_TOUCH)
+ case IRQ_TOUCH:
+ CPLD_INTERRUPTS &= ~CPLD_INTMASK_TOUCH;
break;
+#endif
}
}
@@ -164,11 +212,13 @@ static void lpd7a40x_cpld_handler (unsigned int irq, struct irqdesc *desc,
desc->chip->ack (irq);
- if ((mask & 0x1) == 0) /* WLAN */
+ if ((mask & (1<<0)) == 0) /* WLAN */
IRQ_DISPATCH (IRQ_LPD7A40X_ETH_INT);
- if ((mask & 0x2) == 0) /* Touch */
- IRQ_DISPATCH (IRQ_LPD7A400_TS);
+#if defined (IRQ_TOUCH)
+ if ((mask & (1<<1)) == 0) /* Touch */
+ IRQ_DISPATCH (IRQ_TOUCH);
+#endif
desc->chip->unmask (irq); /* Level-triggered need this */
}
@@ -204,9 +254,21 @@ void __init lh7a40x_init_board_irq (void)
/* Then, configure CPLD interrupt */
- CPLD_INTERRUPTS = 0x9c; /* Disable all CPLD interrupts */
+ /* Disable all CPLD interrupts */
+#if defined (CONFIG_MACH_LPD7A400)
+ CPLD_INTERRUPTS = CPLD_INTMASK_TOUCH | CPLD_INTMASK_PEN
+ | CPLD_INTMASK_ETHERNET;
+ /* *** FIXME: don't know why we need 7 and 4. 7 is way wrong
+ and 4 is uncefined. */
+ // (1<<7)|(1<<4)|(1<<3)|(1<<2);
+#endif
+#if defined (CONFIG_MACH_LPD7A404)
+ CPLD_INTERRUPTS = CPLD_INTMASK_ETHERNET;
+ /* *** FIXME: don't know why we need 6 and 5, neither is defined. */
+ // (1<<6)|(1<<5)|(1<<3);
+#endif
GPIO_PFDD &= ~(1 << pinCPLD); /* Make input */
- GPIO_INTTYPE1 |= (1 << pinCPLD); /* Edge triggered */
+ GPIO_INTTYPE1 &= ~(1 << pinCPLD); /* Level triggered */
GPIO_INTTYPE2 &= ~(1 << pinCPLD); /* Active low */
barrier ();
GPIO_GPIOFINTEN |= (1 << pinCPLD); /* Enable */
@@ -216,7 +278,7 @@ void __init lh7a40x_init_board_irq (void)
for (irq = IRQ_BOARD_START;
irq < IRQ_BOARD_START + NR_IRQ_BOARD; ++irq) {
set_irq_chip (irq, &lpd7a40x_cpld_chip);
- set_irq_handler (irq, do_edge_IRQ);
+ set_irq_handler (irq, do_level_IRQ);
set_irq_flags (irq, IRQF_VALID);
}
@@ -226,91 +288,109 @@ void __init lh7a40x_init_board_irq (void)
lpd7a40x_cpld_handler);
}
-static struct map_desc lpd7a400_io_desc[] __initdata = {
+static struct map_desc lpd7a40x_io_desc[] __initdata = {
{
- .virtual = IO_VIRT,
+ .virtual = IO_VIRT,
.pfn = __phys_to_pfn(IO_PHYS),
- .length = IO_SIZE,
+ .length = IO_SIZE,
.type = MT_DEVICE
- }, { /* Mapping added to work around chip select problems */
+ },
+ { /* Mapping added to work around chip select problems */
.virtual = IOBARRIER_VIRT,
.pfn = __phys_to_pfn(IOBARRIER_PHYS),
.length = IOBARRIER_SIZE,
.type = MT_DEVICE
- }, {
+ },
+ {
.virtual = CF_VIRT,
.pfn = __phys_to_pfn(CF_PHYS),
- .length = CF_SIZE,
+ .length = CF_SIZE,
.type = MT_DEVICE
- }, {
+ },
+ {
.virtual = CPLD02_VIRT,
.pfn = __phys_to_pfn(CPLD02_PHYS),
- .length = CPLD02_SIZE,
+ .length = CPLD02_SIZE,
.type = MT_DEVICE
- }, {
+ },
+ {
.virtual = CPLD06_VIRT,
.pfn = __phys_to_pfn(CPLD06_PHYS),
- .length = CPLD06_SIZE,
+ .length = CPLD06_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = CPLD08_VIRT,
+ .pfn = __phys_to_pfn(CPLD08_PHYS),
+ .length = CPLD08_SIZE,
.type = MT_DEVICE
- }, {
+ },
+ {
.virtual = CPLD08_VIRT,
.pfn = __phys_to_pfn(CPLD08_PHYS),
- .length = CPLD08_SIZE,
+ .length = CPLD08_SIZE,
.type = MT_DEVICE
- }, {
+ },
+ {
+ .virtual = CPLD0A_VIRT,
+ .pfn = __phys_to_pfn(CPLD0A_PHYS),
+ .length = CPLD0A_SIZE,
+ .type = MT_DEVICE
+ },
+ {
.virtual = CPLD0C_VIRT,
.pfn = __phys_to_pfn(CPLD0C_PHYS),
- .length = CPLD0C_SIZE,
+ .length = CPLD0C_SIZE,
.type = MT_DEVICE
- }, {
+ },
+ {
.virtual = CPLD0E_VIRT,
.pfn = __phys_to_pfn(CPLD0E_PHYS),
- .length = CPLD0E_SIZE,
+ .length = CPLD0E_SIZE,
.type = MT_DEVICE
- }, {
+ },
+ {
.virtual = CPLD10_VIRT,
.pfn = __phys_to_pfn(CPLD10_PHYS),
- .length = CPLD10_SIZE,
+ .length = CPLD10_SIZE,
.type = MT_DEVICE
- }, {
+ },
+ {
.virtual = CPLD12_VIRT,
.pfn = __phys_to_pfn(CPLD12_PHYS),
- .length = CPLD12_SIZE,
+ .length = CPLD12_SIZE,
.type = MT_DEVICE
- }, {
+ },
+ {
.virtual = CPLD14_VIRT,
.pfn = __phys_to_pfn(CPLD14_PHYS),
- .length = CPLD14_SIZE,
+ .length = CPLD14_SIZE,
.type = MT_DEVICE
- }, {
+ },
+ {
.virtual = CPLD16_VIRT,
.pfn = __phys_to_pfn(CPLD16_PHYS),
- .length = CPLD16_SIZE,
+ .length = CPLD16_SIZE,
.type = MT_DEVICE
- }, {
+ },
+ {
.virtual = CPLD18_VIRT,
.pfn = __phys_to_pfn(CPLD18_PHYS),
- .length = CPLD18_SIZE,
+ .length = CPLD18_SIZE,
.type = MT_DEVICE
- }, {
+ },
+ {
.virtual = CPLD1A_VIRT,
.pfn = __phys_to_pfn(CPLD1A_PHYS),
- .length = CPLD1A_SIZE,
+ .length = CPLD1A_SIZE,
.type = MT_DEVICE
},
- /* This mapping is redundant since the smc driver performs another. */
-/* { CPLD00_VIRT, CPLD00_PHYS, CPLD00_SIZE, MT_DEVICE }, */
};
void __init
-lpd7a400_map_io(void)
+lpd7a40x_map_io(void)
{
- iotable_init (lpd7a400_io_desc, ARRAY_SIZE (lpd7a400_io_desc));
-
- /* Fixup (improve) Static Memory Controller settings */
- SMC_BCR0 = 0x200039af; /* Boot Flash */
- SMC_BCR6 = 0x1000fbe0; /* CPLD */
- SMC_BCR7 = 0x1000b2c2; /* Compact Flash */
+ iotable_init (lpd7a40x_io_desc, ARRAY_SIZE (lpd7a40x_io_desc));
}
#ifdef CONFIG_MACH_LPD7A400
@@ -320,7 +400,7 @@ MACHINE_START (LPD7A400, "Logic Product Development LPD7A400-10")
.phys_io = 0x80000000,
.io_pg_offst = ((io_p2v (0x80000000))>>18) & 0xfffc,
.boot_params = 0xc0000100,
- .map_io = lpd7a400_map_io,
+ .map_io = lpd7a40x_map_io,
.init_irq = lh7a400_init_irq,
.timer = &lh7a40x_timer,
.init_machine = lpd7a40x_init,
@@ -335,7 +415,7 @@ MACHINE_START (LPD7A404, "Logic Product Development LPD7A404-10")
.phys_io = 0x80000000,
.io_pg_offst = ((io_p2v (0x80000000))>>18) & 0xfffc,
.boot_params = 0xc0000100,
- .map_io = lpd7a400_map_io,
+ .map_io = lpd7a40x_map_io,
.init_irq = lh7a404_init_irq,
.timer = &lh7a40x_timer,
.init_machine = lpd7a40x_init,
diff --git a/arch/arm/mach-lh7a40x/clcd.c b/arch/arm/mach-lh7a40x/clcd.c
new file mode 100644
index 000000000000..93751fee793d
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/clcd.c
@@ -0,0 +1,241 @@
+/*
+ * arch/arm/mach-lh7a40x/clcd.c
+ *
+ * Copyright (C) 2004 Marc Singer
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+
+//#include <linux/module.h>
+//#include <linux/time.h>
+//#include <asm/hardware.h>
+
+//#include <asm/mach/time.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <asm/system.h>
+#include <asm/hardware.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+
+#define HRTFTC_HRSETUP __REG(HRTFTC_PHYS + 0x00)
+#define HRTFTC_HRCON __REG(HRTFTC_PHYS + 0x04)
+#define HRTFTC_HRTIMING1 __REG(HRTFTC_PHYS + 0x08)
+#define HRTFTC_HRTIMING2 __REG(HRTFTC_PHYS + 0x0c)
+
+#define ALI_SETUP __REG(ALI_PHYS + 0x00)
+#define ALI_CONTROL __REG(ALI_PHYS + 0x04)
+#define ALI_TIMING1 __REG(ALI_PHYS + 0x08)
+#define ALI_TIMING2 __REG(ALI_PHYS + 0x0c)
+
+#include "lcd-panel.h"
+
+static void lh7a40x_clcd_disable (struct clcd_fb *fb)
+{
+#if defined (CONFIG_MACH_LPD7A400)
+ CPLD_CONTROL &= ~(1<<1); /* Disable LCD Vee */
+#endif
+
+#if defined (CONFIG_MACH_LPD7A404)
+ GPIO_PCD &= ~(1<<3); /* Disable LCD Vee */
+#endif
+
+#if defined (CONFIG_ARCH_LH7A400)
+ HRTFTC_HRSETUP &= ~(1<<13); /* Disable HRTFT controller */
+#endif
+
+#if defined (CONFIG_ARCH_LH7A404)
+ ALI_SETUP &= ~(1<<13); /* Disable ALI */
+#endif
+}
+
+static void lh7a40x_clcd_enable (struct clcd_fb *fb)
+{
+ struct clcd_panel_extra* extra
+ = (struct clcd_panel_extra*) fb->board_data;
+
+#if defined (CONFIG_MACH_LPD7A400)
+ CPLD_CONTROL |= (1<<1); /* Enable LCD Vee */
+#endif
+
+#if defined (CONFIG_MACH_LPD7A404)
+ GPIO_PCDD &= ~(1<<3); /* Enable LCD Vee */
+ GPIO_PCD |= (1<<3);
+#endif
+
+#if defined (CONFIG_ARCH_LH7A400)
+
+ if (extra) {
+ HRTFTC_HRSETUP
+ = (1 << 13)
+ | ((fb->fb.var.xres - 1) << 4)
+ | 0xc
+ | (extra->hrmode ? 1 : 0);
+ HRTFTC_HRCON
+ = ((extra->clsen ? 1 : 0) << 1)
+ | ((extra->spsen ? 1 : 0) << 0);
+ HRTFTC_HRTIMING1
+ = (extra->pcdel << 8)
+ | (extra->revdel << 4)
+ | (extra->lpdel << 0);
+ HRTFTC_HRTIMING2
+ = (extra->spldel << 9)
+ | (extra->pc2del << 0);
+ }
+ else
+ HRTFTC_HRSETUP
+ = (1 << 13)
+ | 0xc;
+#endif
+
+#if defined (CONFIG_ARCH_LH7A404)
+
+ if (extra) {
+ ALI_SETUP
+ = (1 << 13)
+ | ((fb->fb.var.xres - 1) << 4)
+ | 0xc
+ | (extra->hrmode ? 1 : 0);
+ ALI_CONTROL
+ = ((extra->clsen ? 1 : 0) << 1)
+ | ((extra->spsen ? 1 : 0) << 0);
+ ALI_TIMING1
+ = (extra->pcdel << 8)
+ | (extra->revdel << 4)
+ | (extra->lpdel << 0);
+ ALI_TIMING2
+ = (extra->spldel << 9)
+ | (extra->pc2del << 0);
+ }
+ else
+ ALI_SETUP
+ = (1 << 13)
+ | 0xc;
+#endif
+
+}
+
+#define FRAMESIZE(s) (((s) + PAGE_SIZE - 1)&PAGE_MASK)
+
+static int lh7a40x_clcd_setup (struct clcd_fb *fb)
+{
+ dma_addr_t dma;
+ u32 len = FRAMESIZE (lcd_panel.mode.xres*lcd_panel.mode.yres
+ *(lcd_panel.bpp/8));
+
+ fb->panel = &lcd_panel;
+
+ /* Enforce the sync polarity defaults */
+ if (!(fb->panel->tim2 & TIM2_IHS))
+ fb->fb.var.sync |= FB_SYNC_HOR_HIGH_ACT;
+ if (!(fb->panel->tim2 & TIM2_IVS))
+ fb->fb.var.sync |= FB_SYNC_VERT_HIGH_ACT;
+
+#if defined (HAS_LCD_PANEL_EXTRA)
+ fb->board_data = &lcd_panel_extra;
+#endif
+
+ fb->fb.screen_base
+ = dma_alloc_writecombine (&fb->dev->dev, len,
+ &dma, GFP_KERNEL);
+ printk ("CLCD: LCD setup fb virt 0x%p phys 0x%p l %x io 0x%p \n",
+ fb->fb.screen_base, (void*) dma, len,
+ (void*) io_p2v (CLCDC_PHYS));
+ printk ("CLCD: pixclock %d\n", lcd_panel.mode.pixclock);
+
+ if (!fb->fb.screen_base) {
+ printk(KERN_ERR "CLCD: unable to map framebuffer\n");
+ return -ENOMEM;
+ }
+
+#if defined (USE_RGB555)
+ fb->fb.var.green.length = 5; /* Panel uses RGB 5:5:5 */
+#endif
+
+ fb->fb.fix.smem_start = dma;
+ fb->fb.fix.smem_len = len;
+
+ /* Drive PE4 high to prevent CPLD crash */
+ GPIO_PEDD |= (1<<4);
+ GPIO_PED |= (1<<4);
+
+ GPIO_PINMUX |= (1<<1) | (1<<0); /* LCDVD[15:4] */
+
+// fb->fb.fbops->fb_check_var (&fb->fb.var, &fb->fb);
+// fb->fb.fbops->fb_set_par (&fb->fb);
+
+ return 0;
+}
+
+static int lh7a40x_clcd_mmap (struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+ return dma_mmap_writecombine(&fb->dev->dev, vma,
+ fb->fb.screen_base,
+ fb->fb.fix.smem_start,
+ fb->fb.fix.smem_len);
+}
+
+static void lh7a40x_clcd_remove (struct clcd_fb *fb)
+{
+ dma_free_writecombine (&fb->dev->dev, fb->fb.fix.smem_len,
+ fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+static struct clcd_board clcd_platform_data = {
+ .name = "lh7a40x FB",
+ .check = clcdfb_check,
+ .decode = clcdfb_decode,
+ .enable = lh7a40x_clcd_enable,
+ .setup = lh7a40x_clcd_setup,
+ .mmap = lh7a40x_clcd_mmap,
+ .remove = lh7a40x_clcd_remove,
+ .disable = lh7a40x_clcd_disable,
+};
+
+#define IRQ_CLCDC (IRQ_LCDINTR)
+
+#define AMBA_DEVICE(name,busid,base,plat,pid) \
+static struct amba_device name##_device = { \
+ .dev = { \
+ .coherent_dma_mask = ~0, \
+ .bus_id = busid, \
+ .platform_data = plat, \
+ }, \
+ .res = { \
+ .start = base##_PHYS, \
+ .end = (base##_PHYS) + (4*1024) - 1, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ .dma_mask = ~0, \
+ .irq = { IRQ_##base, }, \
+ /* .dma = base##_DMA,*/ \
+ .periphid = pid, \
+}
+
+AMBA_DEVICE(clcd, "cldc-lh7a40x", CLCDC, &clcd_platform_data, 0x41110);
+
+static struct amba_device *amba_devs[] __initdata = {
+ &clcd_device,
+};
+
+void __init lh7a40x_clcd_init (void)
+{
+ int i;
+ int result;
+ printk ("CLCD: registering amba devices\n");
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ struct amba_device *d = amba_devs[i];
+ result = amba_device_register(d, &iomem_resource);
+ printk (" %d -> %d\n", i ,result);
+ }
+}
diff --git a/arch/arm/mach-lh7a40x/clocks.c b/arch/arm/mach-lh7a40x/clocks.c
new file mode 100644
index 000000000000..2291afe9f23e
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/clocks.c
@@ -0,0 +1,199 @@
+/* arch/arm/mach-lh7a40x/clocks.c
+ *
+ * Copyright (C) 2004 Marc Singer
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/cpufreq.h>
+#include <asm/hardware.h>
+#include <asm/arch/clocks.h>
+#include <linux/err.h>
+
+struct module;
+struct icst525_params;
+
+struct clk {
+ struct list_head node;
+ unsigned long rate;
+ struct module *owner;
+ const char *name;
+// void *data;
+// const struct icst525_params *params;
+// void (*setvco)(struct clk *, struct icst525_vco vco);
+};
+
+int clk_register(struct clk *clk);
+void clk_unregister(struct clk *clk);
+
+/* ----- */
+
+#define MAINDIV1(c) (((c) >> 7) & 0x0f)
+#define MAINDIV2(c) (((c) >> 11) & 0x1f)
+#define PS(c) (((c) >> 18) & 0x03)
+#define PREDIV(c) (((c) >> 2) & 0x1f)
+#define HCLKDIV(c) (((c) >> 0) & 0x02)
+#define PCLKDIV(c) (((c) >> 16) & 0x03)
+
+unsigned int cpufreq_get (unsigned int cpu) /* in kHz */
+{
+ return fclkfreq_get ()/1000;
+}
+EXPORT_SYMBOL(cpufreq_get);
+
+unsigned int fclkfreq_get (void)
+{
+ unsigned int clkset = CSC_CLKSET;
+ unsigned int gclk
+ = XTAL_IN
+ / (1 << PS(clkset))
+ * (MAINDIV1(clkset) + 2)
+ / (PREDIV(clkset) + 2)
+ * (MAINDIV2(clkset) + 2)
+ ;
+ return gclk;
+}
+
+unsigned int hclkfreq_get (void)
+{
+ unsigned int clkset = CSC_CLKSET;
+ unsigned int hclk = fclkfreq_get () / (HCLKDIV(clkset) + 1);
+
+ return hclk;
+}
+
+unsigned int pclkfreq_get (void)
+{
+ unsigned int clkset = CSC_CLKSET;
+ int pclkdiv = PCLKDIV(clkset);
+ unsigned int pclk;
+ if (pclkdiv == 0x3)
+ pclkdiv = 0x2;
+ pclk = hclkfreq_get () / (1 << pclkdiv);
+
+ return pclk;
+}
+
+/* ----- */
+
+static LIST_HEAD(clocks);
+static DECLARE_MUTEX(clocks_sem);
+
+struct clk *clk_get (struct device *dev, const char *id)
+{
+ struct clk *p;
+ struct clk *clk = ERR_PTR(-ENOENT);
+
+ down (&clocks_sem);
+ list_for_each_entry (p, &clocks, node) {
+ if (strcmp (id, p->name) == 0
+ && try_module_get(p->owner)) {
+ clk = p;
+ break;
+ }
+ }
+ up (&clocks_sem);
+
+ return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put (struct clk *clk)
+{
+ module_put(clk->owner);
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_enable (struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable (struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+int clk_use (struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_use);
+
+void clk_unuse (struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_unuse);
+
+unsigned long clk_get_rate (struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate (struct clk *clk, unsigned long rate)
+{
+ return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate (struct clk *clk, unsigned long rate)
+{
+ int ret = -EIO;
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+#if 0
+/*
+ * These are fixed clocks.
+ */
+static struct clk kmi_clk = {
+ .name = "KMIREFCLK",
+ .rate = 24000000,
+};
+
+static struct clk uart_clk = {
+ .name = "UARTCLK",
+ .rate = 24000000,
+};
+
+static struct clk mmci_clk = {
+ .name = "MCLK",
+ .rate = 33000000,
+};
+#endif
+
+static struct clk clcd_clk = {
+ .name = "CLCDCLK",
+ .rate = 0,
+};
+
+int clk_register (struct clk *clk)
+{
+ down (&clocks_sem);
+ list_add (&clk->node, &clocks);
+ up (&clocks_sem);
+ return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister (struct clk *clk)
+{
+ down (&clocks_sem);
+ list_del (&clk->node);
+ up (&clocks_sem);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+static int __init clk_init (void)
+{
+ clk_register(&clcd_clk);
+ return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-lh7a40x/common.h b/arch/arm/mach-lh7a40x/common.h
index ea8de7e3ab1b..18e8bb4eb202 100644
--- a/arch/arm/mach-lh7a40x/common.h
+++ b/arch/arm/mach-lh7a40x/common.h
@@ -12,6 +12,7 @@ extern struct sys_timer lh7a40x_timer;
extern void lh7a400_init_irq (void);
extern void lh7a404_init_irq (void);
+extern void lh7a40x_clcd_init (void);
extern void lh7a40x_init_board_irq (void);
#define IRQ_DISPATCH(irq) desc_handle_irq((irq),(irq_desc + irq), regs)
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a404.c b/arch/arm/mach-lh7a40x/irq-lh7a404.c
index e902e3d87da4..2685a81454d2 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a404.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a404.c
@@ -28,13 +28,17 @@
static unsigned char irq_pri_vic1[] = {
#if defined (USE_PRIORITIES)
-IRQ_GPIO3INTR,
+ IRQ_GPIO3INTR, /* CPLD */
+ IRQ_DMAM2P4, IRQ_DMAM2P5, /* AC97 */
#endif
};
static unsigned char irq_pri_vic2[] = {
#if defined (USE_PRIORITIES)
- IRQ_T3UI, IRQ_GPIO7INTR,
+ IRQ_T3UI, /* Timer */
+ IRQ_GPIO7INTR, /* CPLD */
IRQ_UART1INTR, IRQ_UART2INTR, IRQ_UART3INTR,
+ IRQ_LCDINTR, /* LCD */
+ IRQ_TSCINTR, /* ADC/Touchscreen */
#endif
};
@@ -98,10 +102,19 @@ static struct irqchip lh7a404_gpio_vic2_chip = {
/* IRQ initialization */
+#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
+extern void* branch_irq_lh7a400;
+#endif
+
void __init lh7a404_init_irq (void)
{
int irq;
+#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
+#define NOP 0xe1a00000 /* mov r0, r0 */
+ branch_irq_lh7a400 = NOP;
+#endif
+
VIC1_INTENCLR = 0xffffffff;
VIC2_INTENCLR = 0xffffffff;
VIC1_INTSEL = 0; /* All IRQs */
diff --git a/arch/arm/mach-lh7a40x/lcd-panel.h b/arch/arm/mach-lh7a40x/lcd-panel.h
new file mode 100644
index 000000000000..4fb2efc4950f
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/lcd-panel.h
@@ -0,0 +1,346 @@
+/* lcd-panel.h
+ $Id$
+
+ written by Marc Singer
+ 18 Jul 2005
+
+ Copyright (C) 2005 Marc Singer
+
+ -----------
+ DESCRIPTION
+ -----------
+
+ Only one panel may be defined at a time.
+
+ The pixel clock is calculated to be no greater than the target.
+
+ Each timing value is accompanied by a specification comment.
+
+ UNITS/MIN/TYP/MAX
+
+ Most of the units will be in clocks.
+
+ USE_RGB555
+
+ Define this macro to configure the AMBA LCD controller to use an
+ RGB555 encoding for the pels instead of the normal RGB565.
+
+ LPD9520, LPD79524, LPD7A400, LPD7A404-10, LPD7A404-11
+
+ These boards are best approximated by 555 for all panels. Some
+ can use an extra low-order bit of blue in bit 16 of the color
+ value, but we don't have a way to communicate this non-linear
+ mapping to the kernel.
+
+*/
+
+#if !defined (__LCD_PANEL_H__)
+# define __LCD_PANEL_H__
+
+#if defined (MACH_LPD79520)\
+ || defined (MACH_LPD79524)\
+ || defined (MACH_LPD7A400)\
+ || defined (MACH_LPD7A404)
+# define USE_RGB555
+#endif
+
+struct clcd_panel_extra {
+ unsigned int hrmode;
+ unsigned int clsen;
+ unsigned int spsen;
+ unsigned int pcdel;
+ unsigned int revdel;
+ unsigned int lpdel;
+ unsigned int spldel;
+ unsigned int pc2del;
+};
+
+#define NS_TO_CLOCK(ns,c) ((((ns)*((c)/1000) + (1000000 - 1))/1000000))
+#define CLOCK_TO_DIV(e,c) (((c) + (e) - 1)/(e))
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
+
+ /* Logic Product Development LCD 3.5" QVGA HRTFT -10 */
+ /* Sharp PN LQ035Q7DB02 w/HRTFT controller chip */
+
+#define PIX_CLOCK_TARGET (6800000)
+#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+ .mode = {
+ .name = "3.5in QVGA (LQ035Q7DB02)",
+ .xres = 240,
+ .yres = 320,
+ .pixclock = PIX_CLOCK,
+ .left_margin = 16,
+ .right_margin = 21,
+ .upper_margin = 8, // line/8/8/8
+ .lower_margin = 5,
+ .hsync_len = 61,
+ .vsync_len = NS_TO_CLOCK (60, PIX_CLOCK),
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_IPC | (PIX_CLOCK_DIVIDER - 2),
+ .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
+ .bpp = 16,
+};
+
+#define HAS_LCD_PANEL_EXTRA
+
+static struct clcd_panel_extra lcd_panel_extra = {
+ .hrmode = 1,
+ .clsen = 1,
+ .spsen = 1,
+ .pcdel = 8,
+ .revdel = 7,
+ .lpdel = 13,
+ .spldel = 77,
+ .pc2del = 208,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02
+
+ /* Logic Product Development LCD 5.7" QVGA -10 */
+ /* Sharp PN LQ057Q3DC02 */
+ /* QVGA mode, V/Q=LOW */
+
+/* From Sharp on 2006.1.3. I believe some of the values are incorrect
+ * based on the datasheet.
+
+ Timing0 TIMING1 TIMING2 CONTROL
+ 0x140A0C4C 0x080504EF 0x013F380D 0x00000829
+ HBP= 20 VBP= 8 BCD= 0
+ HFP= 10 VFP= 5 CPL=319
+ HSW= 12 VSW= 1 IOE= 0
+ PPL= 19 LPP=239 IPC= 1
+ IHS= 1
+ IVS= 1
+ ACB= 0
+ CSEL= 0
+ PCD= 13
+
+ */
+
+/* The full horozontal cycle (Th) is clock/360/400/450. */
+/* The full vertical cycle (Tv) is line/251/262/280. */
+
+#define PIX_CLOCK_TARGET (6300000) /* -/6.3/7 MHz */
+#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+ .mode = {
+ .name = "5.7in QVGA (LQ057Q3DC02)",
+ .xres = 320,
+ .yres = 240,
+ .pixclock = PIX_CLOCK,
+ .left_margin = 11,
+ .right_margin = 400-11-320-2,
+ .upper_margin = 7, // line/7/7/7
+ .lower_margin = 262-7-240-2,
+ .hsync_len = 2, // clk/2/96/200
+ .vsync_len = 2, // line/2/-/34
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_IHS | TIM2_IVS
+ | (PIX_CLOCK_DIVIDER - 2),
+ .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
+ .bpp = 16,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ64D343
+
+ /* Logic Product Development LCD 6.4" VGA -10 */
+ /* Sharp PN LQ64D343 */
+
+/* The full horozontal cycle (Th) is clock/750/800/900. */
+/* The full vertical cycle (Tv) is line/515/525/560. */
+
+#define PIX_CLOCK_TARGET (28330000)
+#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+ .mode = {
+ .name = "6.4in QVGA (LQ64D343)",
+ .xres = 640,
+ .yres = 480,
+ .pixclock = PIX_CLOCK,
+ .left_margin = 32,
+ .right_margin = 800-32-640-96,
+ .upper_margin = 32, // line/34/34/34
+ .lower_margin = 540-32-480-2,
+ .hsync_len = 96, // clk/2/96/200
+ .vsync_len = 2, // line/2/-/34
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_IHS | TIM2_IVS
+ | (PIX_CLOCK_DIVIDER - 2),
+ .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
+ .bpp = 16,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ10D368
+
+ /* Logic Product Development LCD 10.4" VGA -10 */
+ /* Sharp PN LQ10D368 */
+
+#define PIX_CLOCK_TARGET (28330000)
+#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+ .mode = {
+ .name = "10.4in VGA (LQ10D368)",
+ .xres = 640,
+ .yres = 480,
+ .pixclock = PIX_CLOCK,
+ .left_margin = 21,
+ .right_margin = 15,
+ .upper_margin = 34,
+ .lower_margin = 5,
+ .hsync_len = 96,
+ .vsync_len = 16,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_IHS | TIM2_IVS
+ | (PIX_CLOCK_DIVIDER - 2),
+ .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
+ .bpp = 16,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41
+
+ /* Logic Product Development LCD 12.1" SVGA -10 */
+ /* Sharp PN LQ121S1DG41, was LQ121S1DG31 */
+
+/* Note that with a 99993900 Hz HCLK, it is not possible to hit the
+ * target clock frequency range of 35MHz to 42MHz. */
+
+/* If the target pixel clock is substantially lower than the panel
+ * spec, this is done to prevent the LCD display from glitching when
+ * the CPU is under load. A pixel clock higher than 25MHz
+ * (empirically determined) will compete with the CPU for bus cycles
+ * for the Ethernet chip. However, even a pixel clock of 10MHz
+ * competes with Compact Flash interface during some operations
+ * (fdisk, e2fsck). And, at that speed the display may have a visible
+ * flicker. */
+
+/* The full horozontal cycle (Th) is clock/832/1056/1395. */
+
+#define PIX_CLOCK_TARGET (20000000)
+#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+ .mode = {
+ .name = "12.1in SVGA (LQ121S1DG41)",
+ .xres = 800,
+ .yres = 600,
+ .pixclock = PIX_CLOCK,
+ .left_margin = 89, // ns/5/-/(1/PIX_CLOCK)-10
+ .right_margin = 1056-800-89-128,
+ .upper_margin = 23, // line/23/23/23
+ .lower_margin = 44,
+ .hsync_len = 128, // clk/2/128/200
+ .vsync_len = 4, // line/2/4/6
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_IHS | TIM2_IVS
+ | (PIX_CLOCK_DIVIDER - 2),
+ .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
+ .bpp = 16,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_HITACHI
+
+ /* Hitachi*/
+ /* Submitted by Michele Da Rold <michele.darold@ecsproject.com> */
+
+#define PIX_CLOCK_TARGET (49000000)
+#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+ .mode = {
+ .name = "Hitachi 800x480",
+ .xres = 800,
+ .yres = 480,
+ .pixclock = PIX_CLOCK,
+ .left_margin = 88,
+ .right_margin = 40,
+ .upper_margin = 32,
+ .lower_margin = 11,
+ .hsync_len = 128,
+ .vsync_len = 2,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_IPC | TIM2_IHS | TIM2_IVS
+ | (PIX_CLOCK_DIVIDER - 2),
+ .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
+ .bpp = 16,
+};
+
+#endif
+
+
+#if defined CONFIG_FB_ARMCLCD_AUO_A070VW01_WIDE
+
+ /* AU Optotronics A070VW01 7.0 Wide Screen color Display*/
+ /* Submitted by Michele Da Rold <michele.darold@ecsproject.com> */
+
+#define PIX_CLOCK_TARGET (10000000)
+#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+ .mode = {
+ .name = "7.0in Wide (A070VW01)",
+ .xres = 480,
+ .yres = 234,
+ .pixclock = PIX_CLOCK,
+ .left_margin = 30,
+ .right_margin = 25,
+ .upper_margin = 14,
+ .lower_margin = 12,
+ .hsync_len = 100,
+ .vsync_len = 1,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_IPC | TIM2_IHS | TIM2_IVS
+ | (PIX_CLOCK_DIVIDER - 2),
+ .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
+ .bpp = 16,
+};
+
+#endif
+
+#undef NS_TO_CLOCK
+#undef CLOCK_TO_DIV
+
+#endif /* __LCD_PANEL_H__ */
diff --git a/arch/arm/mach-lh7a40x/ssp-cpld.c b/arch/arm/mach-lh7a40x/ssp-cpld.c
new file mode 100644
index 000000000000..a10830186dac
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/ssp-cpld.c
@@ -0,0 +1,343 @@
+/* arch/arm/mach-lh7a40x/ssp-cpld.c
+ *
+ * Copyright (C) 2004,2005 Marc Singer
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * SSP/SPI driver for the CardEngine CPLD.
+ *
+ */
+
+/* NOTES
+ -----
+
+ o *** This driver is cribbed from the 7952x implementation.
+ Some comments may not apply.
+
+ o This driver contains sufficient logic to control either the
+ serial EEPROMs or the audio codec. It is included in the kernel
+ to support the codec. The EEPROMs are really the responsibility
+ of the boot loader and should probably be left alone.
+
+ o The code must be augmented to cope with multiple, simultaneous
+ clients.
+ o The audio codec writes to the codec chip whenever playback
+ starts.
+ o The touchscreen driver writes to the ads chip every time it
+ samples.
+ o The audio codec must write 16 bits, but the touch chip writes
+ are 8 bits long.
+ o We need to be able to keep these configurations separate while
+ simultaneously active.
+
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+//#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+//#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+
+#include <asm/arch/ssp.h>
+
+//#define TALK
+
+#if defined (TALK)
+#define PRINTK(f...) printk (f)
+#else
+#define PRINTK(f...) do {} while (0)
+#endif
+
+#if defined (CONFIG_ARCH_LH7A400)
+# define CPLD_SPID __REGP16(CPLD06_VIRT) /* SPI data */
+# define CPLD_SPIC __REGP16(CPLD08_VIRT) /* SPI control */
+# define CPLD_SPIC_CS_CODEC (1<<0)
+# define CPLD_SPIC_CS_TOUCH (1<<1)
+# define CPLD_SPIC_WRITE (0<<2)
+# define CPLD_SPIC_READ (1<<2)
+# define CPLD_SPIC_DONE (1<<3) /* r/o */
+# define CPLD_SPIC_LOAD (1<<4)
+# define CPLD_SPIC_START (1<<4)
+# define CPLD_SPIC_LOADED (1<<5) /* r/o */
+#endif
+
+#define CPLD_SPI __REGP16(CPLD0A_VIRT) /* SPI operation */
+#define CPLD_SPI_CS_EEPROM (1<<3)
+#define CPLD_SPI_SCLK (1<<2)
+#define CPLD_SPI_TX_SHIFT (1)
+#define CPLD_SPI_TX (1<<CPLD_SPI_TX_SHIFT)
+#define CPLD_SPI_RX_SHIFT (0)
+#define CPLD_SPI_RX (1<<CPLD_SPI_RX_SHIFT)
+
+/* *** FIXME: these timing values are substantially larger than the
+ *** chip requires. We may implement an nsleep () function. */
+#define T_SKH 1 /* Clock time high (us) */
+#define T_SKL 1 /* Clock time low (us) */
+#define T_CS 1 /* Minimum chip select low time (us) */
+#define T_CSS 1 /* Minimum chip select setup time (us) */
+#define T_DIS 1 /* Data setup time (us) */
+
+ /* EEPROM SPI bits */
+#define P_START (1<<9)
+#define P_WRITE (1<<7)
+#define P_READ (2<<7)
+#define P_ERASE (3<<7)
+#define P_EWDS (0<<7)
+#define P_WRAL (0<<7)
+#define P_ERAL (0<<7)
+#define P_EWEN (0<<7)
+#define P_A_EWDS (0<<5)
+#define P_A_WRAL (1<<5)
+#define P_A_ERAL (2<<5)
+#define P_A_EWEN (3<<5)
+
+struct ssp_configuration {
+ int device;
+ int mode;
+ int speed;
+ int frame_size_write;
+ int frame_size_read;
+};
+
+static struct ssp_configuration ssp_configuration;
+static spinlock_t ssp_lock;
+
+static void enable_cs (void)
+{
+ switch (ssp_configuration.device) {
+ case DEVICE_EEPROM:
+ CPLD_SPI |= CPLD_SPI_CS_EEPROM;
+ break;
+ }
+ udelay (T_CSS);
+}
+
+static void disable_cs (void)
+{
+ switch (ssp_configuration.device) {
+ case DEVICE_EEPROM:
+ CPLD_SPI &= ~CPLD_SPI_CS_EEPROM;
+ break;
+ }
+ udelay (T_CS);
+}
+
+static void pulse_clock (void)
+{
+ CPLD_SPI |= CPLD_SPI_SCLK;
+ udelay (T_SKH);
+ CPLD_SPI &= ~CPLD_SPI_SCLK;
+ udelay (T_SKL);
+}
+
+
+/* execute_spi_command
+
+ sends an spi command to a device. It first sends cwrite bits from
+ v. If cread is greater than zero it will read cread bits
+ (discarding the leading 0 bit) and return them. If cread is less
+ than zero it will check for completetion status and return 0 on
+ success or -1 on timeout. If cread is zero it does nothing other
+ than sending the command.
+
+ On the LPD7A400, we can only read or write multiples of 8 bits on
+ the codec and the touch screen device. Here, we round up.
+
+*/
+
+static int execute_spi_command (int v, int cwrite, int cread)
+{
+ unsigned long l = 0;
+
+#if defined (CONFIG_MACH_LPD7A400)
+ /* The codec and touch devices cannot be bit-banged. Instead,
+ * the CPLD provides an eight-bit shift register and a crude
+ * interface. */
+ if ( ssp_configuration.device == DEVICE_CODEC
+ || ssp_configuration.device == DEVICE_TOUCH) {
+ int select = 0;
+
+ PRINTK ("spi(%d %d.%d) 0x%04x",
+ ssp_configuration.device, cwrite, cread,
+ v);
+#if defined (TALK)
+ if (ssp_configuration.device == DEVICE_CODEC)
+ PRINTK (" 0x%03x -> %2d", v & 0x1ff, (v >> 9) & 0x7f);
+#endif
+ PRINTK ("\n");
+
+ if (ssp_configuration.device == DEVICE_CODEC)
+ select = CPLD_SPIC_CS_CODEC;
+ if (ssp_configuration.device == DEVICE_TOUCH)
+ select = CPLD_SPIC_CS_TOUCH;
+ if (cwrite) {
+ for (cwrite = (cwrite + 7)/8; cwrite-- > 0; ) {
+ CPLD_SPID = (v >> (8*cwrite)) & 0xff;
+ CPLD_SPIC = select | CPLD_SPIC_LOAD;
+ while (!(CPLD_SPIC & CPLD_SPIC_LOADED))
+ ;
+ CPLD_SPIC = select;
+ while (!(CPLD_SPIC & CPLD_SPIC_DONE))
+ ;
+ }
+ v = 0;
+ }
+ if (cread) {
+ mdelay (2); /* *** FIXME: required by ads7843? */
+ v = 0;
+ for (cread = (cread + 7)/8; cread-- > 0;) {
+ CPLD_SPID = 0;
+ CPLD_SPIC = select | CPLD_SPIC_READ
+ | CPLD_SPIC_START;
+ while (!(CPLD_SPIC & CPLD_SPIC_LOADED))
+ ;
+ CPLD_SPIC = select | CPLD_SPIC_READ;
+ while (!(CPLD_SPIC & CPLD_SPIC_DONE))
+ ;
+ v = (v << 8) | CPLD_SPID;
+ }
+ }
+ return v;
+ }
+#endif
+
+ PRINTK ("spi(%d) 0x%04x -> 0x%x\r\n", ssp_configuration.device,
+ v & 0x1ff, (v >> 9) & 0x7f);
+
+ enable_cs ();
+
+ v <<= CPLD_SPI_TX_SHIFT; /* Correction for position of SPI_TX bit */
+ while (cwrite--) {
+ CPLD_SPI
+ = (CPLD_SPI & ~CPLD_SPI_TX)
+ | ((v >> cwrite) & CPLD_SPI_TX);
+ udelay (T_DIS);
+ pulse_clock ();
+ }
+
+ if (cread < 0) {
+ int delay = 10;
+ disable_cs ();
+ udelay (1);
+ enable_cs ();
+
+ l = -1;
+ do {
+ if (CPLD_SPI & CPLD_SPI_RX) {
+ l = 0;
+ break;
+ }
+ } while (udelay (1), --delay);
+ }
+ else
+ /* We pulse the clock before the data to skip the leading zero. */
+ while (cread-- > 0) {
+ pulse_clock ();
+ l = (l<<1)
+ | (((CPLD_SPI & CPLD_SPI_RX)
+ >> CPLD_SPI_RX_SHIFT) & 0x1);
+ }
+
+ disable_cs ();
+ return l;
+}
+
+static int ssp_init (void)
+{
+ spin_lock_init (&ssp_lock);
+ memset (&ssp_configuration, 0, sizeof (ssp_configuration));
+ return 0;
+}
+
+
+/* ssp_chip_select
+
+ drops the chip select line for the CPLD shift-register controlled
+ devices. It doesn't enable chip
+
+*/
+
+static void ssp_chip_select (int enable)
+{
+#if defined (CONFIG_MACH_LPD7A400)
+ int select;
+
+ if (ssp_configuration.device == DEVICE_CODEC)
+ select = CPLD_SPIC_CS_CODEC;
+ else if (ssp_configuration.device == DEVICE_TOUCH)
+ select = CPLD_SPIC_CS_TOUCH;
+ else
+ return;
+
+ if (enable)
+ CPLD_SPIC = select;
+ else
+ CPLD_SPIC = 0;
+#endif
+}
+
+static void ssp_acquire (void)
+{
+ spin_lock (&ssp_lock);
+}
+
+static void ssp_release (void)
+{
+ ssp_chip_select (0); /* just in case */
+ spin_unlock (&ssp_lock);
+}
+
+static int ssp_configure (int device, int mode, int speed,
+ int frame_size_write, int frame_size_read)
+{
+ ssp_configuration.device = device;
+ ssp_configuration.mode = mode;
+ ssp_configuration.speed = speed;
+ ssp_configuration.frame_size_write = frame_size_write;
+ ssp_configuration.frame_size_read = frame_size_read;
+
+ return 0;
+}
+
+static int ssp_read (void)
+{
+ return execute_spi_command (0, 0, ssp_configuration.frame_size_read);
+}
+
+static int ssp_write (u16 data)
+{
+ execute_spi_command (data, ssp_configuration.frame_size_write, 0);
+ return 0;
+}
+
+static int ssp_write_read (u16 data)
+{
+ return execute_spi_command (data, ssp_configuration.frame_size_write,
+ ssp_configuration.frame_size_read);
+}
+
+struct ssp_driver lh7a40x_cpld_ssp_driver = {
+ .init = ssp_init,
+ .acquire = ssp_acquire,
+ .release = ssp_release,
+ .configure = ssp_configure,
+ .chip_select = ssp_chip_select,
+ .read = ssp_read,
+ .write = ssp_write,
+ .write_read = ssp_write_read,
+};
+
+
+MODULE_AUTHOR("Marc Singer");
+MODULE_DESCRIPTION("LPD7A40X CPLD SPI driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-lh7a40x/time.c b/arch/arm/mach-lh7a40x/time.c
index be377e331f25..ef9af375fcc4 100644
--- a/arch/arm/mach-lh7a40x/time.c
+++ b/arch/arm/mach-lh7a40x/time.c
@@ -1,4 +1,4 @@
-/*
+/*
* arch/arm/mach-lh7a40x/time.c
*
* Copyright (C) 2004 Logic Product Development
@@ -57,7 +57,7 @@ static struct irqaction lh7a40x_timer_irq = {
.handler = lh7a40x_timer_interrupt,
};
-static void __init lh7a40x_timer_init(void)
+static void __init lh7a40x_timer_init (void)
{
/* Stop/disable all timers */
TIMER_CONTROL1 = 0;
diff --git a/arch/arm/mach-pnx4008/Makefile b/arch/arm/mach-pnx4008/Makefile
new file mode 100644
index 000000000000..b457ca0a431a
--- /dev/null
+++ b/arch/arm/mach-pnx4008/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o
+obj-m :=
+obj-n :=
+obj- :=
+
+# Power Management
+obj-$(CONFIG_PM) += pm.o sleep.o
+
diff --git a/arch/arm/mach-pnx4008/Makefile.boot b/arch/arm/mach-pnx4008/Makefile.boot
new file mode 100644
index 000000000000..44c7117e20dd
--- /dev/null
+++ b/arch/arm/mach-pnx4008/Makefile.boot
@@ -0,0 +1,4 @@
+ zreladdr-y := 0x80008000
+params_phys-y := 0x80000100
+initrd_phys-y := 0x80800000
+
diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
new file mode 100644
index 000000000000..285b22f631e9
--- /dev/null
+++ b/arch/arm/mach-pnx4008/clock.c
@@ -0,0 +1,1010 @@
+/*
+ * arch/arm/mach-pnx4008/clock.c
+ *
+ * Clock control driver for PNX4008
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ * Generic clock management functions are partially based on:
+ * linux/arch/arm/mach-omap/clock.c
+ *
+ * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+
+#include <asm/semaphore.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/clock.h>
+#include "clock.h"
+
+/*forward declaration*/
+static struct clk per_ck;
+static struct clk hclk_ck;
+static struct clk ck_1MHz;
+static struct clk ck_13MHz;
+static struct clk ck_pll1;
+static int local_set_rate(struct clk *clk, u32 rate);
+
+static inline void clock_lock(void)
+{
+ local_irq_disable();
+}
+
+static inline void clock_unlock(void)
+{
+ local_irq_enable();
+}
+
+static void propagate_rate(struct clk *clk)
+{
+ struct clk *tmp_clk;
+
+ tmp_clk = clk;
+ while (tmp_clk->propagate_next) {
+ tmp_clk = tmp_clk->propagate_next;
+ local_set_rate(tmp_clk, tmp_clk->user_rate);
+ }
+}
+
+static inline void clk_reg_disable(struct clk *clk)
+{
+ if (clk->enable_reg)
+ __raw_writel(__raw_readl(clk->enable_reg) &
+ ~(1 << clk->enable_shift), clk->enable_reg);
+}
+
+static inline void clk_reg_enable(struct clk *clk)
+{
+ if (clk->enable_reg)
+ __raw_writel(__raw_readl(clk->enable_reg) |
+ (1 << clk->enable_shift), clk->enable_reg);
+}
+
+static inline void clk_reg_disable1(struct clk *clk)
+{
+ if (clk->enable_reg1)
+ __raw_writel(__raw_readl(clk->enable_reg1) &
+ ~(1 << clk->enable_shift1), clk->enable_reg1);
+}
+
+static inline void clk_reg_enable1(struct clk *clk)
+{
+ if (clk->enable_reg1)
+ __raw_writel(__raw_readl(clk->enable_reg1) |
+ (1 << clk->enable_shift1), clk->enable_reg1);
+}
+
+static int clk_wait_for_pll_lock(struct clk *clk)
+{
+ int i;
+ i = 0;
+ while (i++ < 0xFFF && !(__raw_readl(clk->scale_reg) & 1)) ; /*wait for PLL to lock */
+
+ if (!(__raw_readl(clk->scale_reg) & 1)) {
+ printk(KERN_ERR
+ "%s ERROR: failed to lock, scale reg data: %x\n",
+ clk->name, __raw_readl(clk->scale_reg));
+ return -1;
+ }
+ return 0;
+}
+
+static int switch_to_dirty_13mhz(struct clk *clk)
+{
+ int i;
+ int ret;
+ u32 tmp_reg;
+
+ ret = 0;
+
+ if (!clk->rate)
+ clk_reg_enable1(clk);
+
+ tmp_reg = __raw_readl(clk->parent_switch_reg);
+ /*if 13Mhz clock selected, select 13'MHz (dirty) source from OSC */
+ if (!(tmp_reg & 1)) {
+ tmp_reg |= (1 << 1); /* Trigger switch to 13'MHz (dirty) clock */
+ __raw_writel(tmp_reg, clk->parent_switch_reg);
+ i = 0;
+ while (i++ < 0xFFF && !(__raw_readl(clk->parent_switch_reg) & 1)) ; /*wait for 13'MHz selection status */
+
+ if (!(__raw_readl(clk->parent_switch_reg) & 1)) {
+ printk(KERN_ERR
+ "%s ERROR: failed to select 13'MHz, parent sw reg data: %x\n",
+ clk->name, __raw_readl(clk->parent_switch_reg));
+ ret = -1;
+ }
+ }
+
+ if (!clk->rate)
+ clk_reg_disable1(clk);
+
+ return ret;
+}
+
+static int switch_to_clean_13mhz(struct clk *clk)
+{
+ int i;
+ int ret;
+ u32 tmp_reg;
+
+ ret = 0;
+
+ if (!clk->rate)
+ clk_reg_enable1(clk);
+
+ tmp_reg = __raw_readl(clk->parent_switch_reg);
+ /*if 13'Mhz clock selected, select 13MHz (clean) source from OSC */
+ if (tmp_reg & 1) {
+ tmp_reg &= ~(1 << 1); /* Trigger switch to 13MHz (clean) clock */
+ __raw_writel(tmp_reg, clk->parent_switch_reg);
+ i = 0;
+ while (i++ < 0xFFF && (__raw_readl(clk->parent_switch_reg) & 1)) ; /*wait for 13MHz selection status */
+
+ if (__raw_readl(clk->parent_switch_reg) & 1) {
+ printk(KERN_ERR
+ "%s ERROR: failed to select 13MHz, parent sw reg data: %x\n",
+ clk->name, __raw_readl(clk->parent_switch_reg));
+ ret = -1;
+ }
+ }
+
+ if (!clk->rate)
+ clk_reg_disable1(clk);
+
+ return ret;
+}
+
+static int set_13MHz_parent(struct clk *clk, struct clk *parent)
+{
+ int ret = -EINVAL;
+
+ if (parent == &ck_13MHz)
+ ret = switch_to_clean_13mhz(clk);
+ else if (parent == &ck_pll1)
+ ret = switch_to_dirty_13mhz(clk);
+
+ return ret;
+}
+
+#define PLL160_MIN_FCCO 156000
+#define PLL160_MAX_FCCO 320000
+
+/*
+ * Calculate pll160 settings.
+ * Possible input: up to 320MHz with step of clk->parent->rate.
+ * In PNX4008 parent rate for pll160s may be either 1 or 13MHz.
+ * Ignored paths: "feedback" (bit 13 set), "div-by-N".
+ * Setting ARM PLL4 rate to 0 will put CPU into direct run mode.
+ * Setting PLL5 and PLL3 rate to 0 will disable USB and DSP clock input.
+ * Please refer to PNX4008 IC manual for details.
+ */
+
+static int pll160_set_rate(struct clk *clk, u32 rate)
+{
+ u32 tmp_reg, tmp_m, tmp_2p, i;
+ u32 parent_rate;
+ int ret = -EINVAL;
+
+ parent_rate = clk->parent->rate;
+
+ if (!parent_rate)
+ goto out;
+
+ /* set direct run for ARM or disable output for others */
+ clk_reg_disable(clk);
+
+ /* disable source input as well (ignored for ARM) */
+ clk_reg_disable1(clk);
+
+ tmp_reg = __raw_readl(clk->scale_reg);
+ tmp_reg &= ~0x1ffff; /*clear all settings, power down */
+ __raw_writel(tmp_reg, clk->scale_reg);
+
+ rate -= rate % parent_rate; /*round down the input */
+
+ if (rate > PLL160_MAX_FCCO)
+ rate = PLL160_MAX_FCCO;
+
+ if (!rate) {
+ clk->rate = 0;
+ ret = 0;
+ goto out;
+ }
+
+ clk_reg_enable1(clk);
+ tmp_reg = __raw_readl(clk->scale_reg);
+
+ if (rate == parent_rate) {
+ /*enter direct bypass mode */
+ tmp_reg |= ((1 << 14) | (1 << 15));
+ __raw_writel(tmp_reg, clk->scale_reg);
+ clk->rate = parent_rate;
+ clk_reg_enable(clk);
+ ret = 0;
+ goto out;
+ }
+
+ i = 0;
+ for (tmp_2p = 1; tmp_2p < 16; tmp_2p <<= 1) {
+ if (rate * tmp_2p >= PLL160_MIN_FCCO)
+ break;
+ i++;
+ }
+
+ if (tmp_2p > 1)
+ tmp_reg |= ((i - 1) << 11);
+ else
+ tmp_reg |= (1 << 14); /*direct mode, no divide */
+
+ tmp_m = rate * tmp_2p;
+ tmp_m /= parent_rate;
+
+ tmp_reg |= (tmp_m - 1) << 1; /*calculate M */
+ tmp_reg |= (1 << 16); /*power up PLL */
+ __raw_writel(tmp_reg, clk->scale_reg);
+
+ if (clk_wait_for_pll_lock(clk) < 0) {
+ clk_reg_disable(clk);
+ clk_reg_disable1(clk);
+
+ tmp_reg = __raw_readl(clk->scale_reg);
+ tmp_reg &= ~0x1ffff; /*clear all settings, power down */
+ __raw_writel(tmp_reg, clk->scale_reg);
+ clk->rate = 0;
+ ret = -EFAULT;
+ goto out;
+ }
+
+ clk->rate = (tmp_m * parent_rate) / tmp_2p;
+
+ if (clk->flags & RATE_PROPAGATES)
+ propagate_rate(clk);
+
+ clk_reg_enable(clk);
+ ret = 0;
+
+out:
+ return ret;
+}
+
+/*configure PER_CLK*/
+static int per_clk_set_rate(struct clk *clk, u32 rate)
+{
+ u32 tmp;
+
+ tmp = __raw_readl(clk->scale_reg);
+ tmp &= ~(0x1f << 2);
+ tmp |= ((clk->parent->rate / clk->rate) - 1) << 2;
+ __raw_writel(tmp, clk->scale_reg);
+ clk->rate = rate;
+ return 0;
+}
+
+/*configure HCLK*/
+static int hclk_set_rate(struct clk *clk, u32 rate)
+{
+ u32 tmp;
+ tmp = __raw_readl(clk->scale_reg);
+ tmp = tmp & ~0x3;
+ switch (rate) {
+ case 1:
+ break;
+ case 2:
+ tmp |= 1;
+ break;
+ case 4:
+ tmp |= 2;
+ break;
+ }
+
+ __raw_writel(tmp, clk->scale_reg);
+ clk->rate = rate;
+ return 0;
+}
+
+static u32 hclk_round_rate(struct clk *clk, u32 rate)
+{
+ switch (rate) {
+ case 1:
+ case 4:
+ return rate;
+ }
+ return 2;
+}
+
+static u32 per_clk_round_rate(struct clk *clk, u32 rate)
+{
+ return CLK_RATE_13MHZ;
+}
+
+static int on_off_set_rate(struct clk *clk, u32 rate)
+{
+ if (rate) {
+ clk_reg_enable(clk);
+ clk->rate = 1;
+ } else {
+ clk_reg_disable(clk);
+ clk->rate = 0;
+ }
+ return 0;
+}
+
+static int on_off_inv_set_rate(struct clk *clk, u32 rate)
+{
+ if (rate) {
+ clk_reg_disable(clk); /*enable bit is inverted */
+ clk->rate = 1;
+ } else {
+ clk_reg_enable(clk);
+ clk->rate = 0;
+ }
+ return 0;
+}
+
+static u32 on_off_round_rate(struct clk *clk, u32 rate)
+{
+ return (rate ? 1 : 0);
+}
+
+static u32 pll4_round_rate(struct clk *clk, u32 rate)
+{
+ if (rate > CLK_RATE_208MHZ)
+ rate = CLK_RATE_208MHZ;
+ if (rate == CLK_RATE_208MHZ && hclk_ck.user_rate == 1)
+ rate = CLK_RATE_208MHZ - CLK_RATE_13MHZ;
+ return (rate - (rate % (hclk_ck.user_rate * CLK_RATE_13MHZ)));
+}
+
+static u32 pll3_round_rate(struct clk *clk, u32 rate)
+{
+ if (rate > CLK_RATE_208MHZ)
+ rate = CLK_RATE_208MHZ;
+ return (rate - rate % CLK_RATE_13MHZ);
+}
+
+static u32 pll5_round_rate(struct clk *clk, u32 rate)
+{
+ return (rate ? CLK_RATE_48MHZ : 0);
+}
+
+static u32 ck_13MHz_round_rate(struct clk *clk, u32 rate)
+{
+ return (rate ? CLK_RATE_13MHZ : 0);
+}
+
+static int ck_13MHz_set_rate(struct clk *clk, u32 rate)
+{
+ if (rate) {
+ clk_reg_disable(clk); /*enable bit is inverted */
+ udelay(500);
+ clk->rate = CLK_RATE_13MHZ;
+ ck_1MHz.rate = CLK_RATE_1MHZ;
+ } else {
+ clk_reg_enable(clk);
+ clk->rate = 0;
+ ck_1MHz.rate = 0;
+ }
+ return 0;
+}
+
+static int pll1_set_rate(struct clk *clk, u32 rate)
+{
+#if 0 /* doesn't work on some boards, probably a HW BUG */
+ if (rate) {
+ clk_reg_disable(clk); /*enable bit is inverted */
+ if (!clk_wait_for_pll_lock(clk)) {
+ clk->rate = CLK_RATE_13MHZ;
+ } else {
+ clk_reg_enable(clk);
+ clk->rate = 0;
+ }
+
+ } else {
+ clk_reg_enable(clk);
+ clk->rate = 0;
+ }
+#endif
+ return 0;
+}
+
+/* Clock sources */
+
+static struct clk osc_13MHz = {
+ .name = "osc_13MHz",
+ .flags = FIXED_RATE,
+ .rate = CLK_RATE_13MHZ,
+};
+
+static struct clk ck_13MHz = {
+ .name = "ck_13MHz",
+ .parent = &osc_13MHz,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &ck_13MHz_round_rate,
+ .set_rate = &ck_13MHz_set_rate,
+ .enable_reg = OSC13CTRL_REG,
+ .enable_shift = 0,
+ .rate = CLK_RATE_13MHZ,
+};
+
+static struct clk osc_32KHz = {
+ .name = "osc_32KHz",
+ .flags = FIXED_RATE,
+ .rate = CLK_RATE_32KHZ,
+};
+
+/*attached to PLL5*/
+static struct clk ck_1MHz = {
+ .name = "ck_1MHz",
+ .flags = FIXED_RATE | PARENT_SET_RATE,
+ .parent = &ck_13MHz,
+};
+
+/* PLL1 (397) - provides 13' MHz clock */
+static struct clk ck_pll1 = {
+ .name = "ck_pll1",
+ .parent = &osc_32KHz,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &ck_13MHz_round_rate,
+ .set_rate = &pll1_set_rate,
+ .enable_reg = PLLCTRL_REG,
+ .enable_shift = 1,
+ .scale_reg = PLLCTRL_REG,
+ .rate = CLK_RATE_13MHZ,
+};
+
+/* CPU/Bus PLL */
+static struct clk ck_pll4 = {
+ .name = "ck_pll4",
+ .parent = &ck_pll1,
+ .flags = RATE_PROPAGATES | NEEDS_INITIALIZATION,
+ .propagate_next = &per_ck,
+ .round_rate = &pll4_round_rate,
+ .set_rate = &pll160_set_rate,
+ .rate = CLK_RATE_208MHZ,
+ .scale_reg = HCLKPLLCTRL_REG,
+ .enable_reg = PWRCTRL_REG,
+ .enable_shift = 2,
+ .parent_switch_reg = SYSCLKCTRL_REG,
+ .set_parent = &set_13MHz_parent,
+};
+
+/* USB PLL */
+static struct clk ck_pll5 = {
+ .name = "ck_pll5",
+ .parent = &ck_1MHz,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &pll5_round_rate,
+ .set_rate = &pll160_set_rate,
+ .scale_reg = USBCTRL_REG,
+ .enable_reg = USBCTRL_REG,
+ .enable_shift = 18,
+ .enable_reg1 = USBCTRL_REG,
+ .enable_shift1 = 17,
+};
+
+/* XPERTTeak DSP PLL */
+static struct clk ck_pll3 = {
+ .name = "ck_pll3",
+ .parent = &ck_pll1,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &pll3_round_rate,
+ .set_rate = &pll160_set_rate,
+ .scale_reg = DSPPLLCTRL_REG,
+ .enable_reg = DSPCLKCTRL_REG,
+ .enable_shift = 3,
+ .enable_reg1 = DSPCLKCTRL_REG,
+ .enable_shift1 = 2,
+ .parent_switch_reg = DSPCLKCTRL_REG,
+ .set_parent = &set_13MHz_parent,
+};
+
+static struct clk hclk_ck = {
+ .name = "hclk_ck",
+ .parent = &ck_pll4,
+ .flags = PARENT_SET_RATE,
+ .set_rate = &hclk_set_rate,
+ .round_rate = &hclk_round_rate,
+ .scale_reg = HCLKDIVCTRL_REG,
+ .rate = 2,
+ .user_rate = 2,
+};
+
+static struct clk per_ck = {
+ .name = "per_ck",
+ .parent = &ck_pll4,
+ .flags = FIXED_RATE,
+ .propagate_next = &hclk_ck,
+ .set_rate = &per_clk_set_rate,
+ .round_rate = &per_clk_round_rate,
+ .scale_reg = HCLKDIVCTRL_REG,
+ .rate = CLK_RATE_13MHZ,
+ .user_rate = CLK_RATE_13MHZ,
+};
+
+static struct clk m2hclk_ck = {
+ .name = "m2hclk_ck",
+ .parent = &hclk_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_inv_set_rate,
+ .rate = 1,
+ .enable_shift = 6,
+ .enable_reg = PWRCTRL_REG,
+};
+
+static struct clk vfp9_ck = {
+ .name = "vfp9_ck",
+ .parent = &ck_pll4,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .rate = 1,
+ .enable_shift = 4,
+ .enable_reg = VFP9CLKCTRL_REG,
+};
+
+static struct clk keyscan_ck = {
+ .name = "keyscan_ck",
+ .parent = &osc_32KHz,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 0,
+ .enable_reg = KEYCLKCTRL_REG,
+};
+
+static struct clk touch_ck = {
+ .name = "touch_ck",
+ .parent = &osc_32KHz,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 0,
+ .enable_reg = TSCLKCTRL_REG,
+};
+
+static struct clk pwm1_ck = {
+ .name = "pwm1_ck",
+ .parent = &osc_32KHz,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 0,
+ .enable_reg = PWMCLKCTRL_REG,
+};
+
+static struct clk pwm2_ck = {
+ .name = "pwm2_ck",
+ .parent = &osc_32KHz,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 2,
+ .enable_reg = PWMCLKCTRL_REG,
+};
+
+static struct clk jpeg_ck = {
+ .name = "jpeg_ck",
+ .parent = &hclk_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 0,
+ .enable_reg = JPEGCLKCTRL_REG,
+};
+
+static struct clk ms_ck = {
+ .name = "ms_ck",
+ .parent = &ck_pll4,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 5,
+ .enable_reg = MSCTRL_REG,
+};
+
+static struct clk dum_ck = {
+ .name = "dum_ck",
+ .parent = &hclk_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 0,
+ .enable_reg = DUMCLKCTRL_REG,
+};
+
+static struct clk flash_ck = {
+ .name = "flash_ck",
+ .parent = &hclk_ck,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 1, /* Only MLC clock supported */
+ .enable_reg = FLASHCLKCTRL_REG,
+};
+
+static struct clk i2c0_ck = {
+ .name = "i2c0_ck",
+ .parent = &per_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 0,
+ .enable_reg = I2CCLKCTRL_REG,
+};
+
+static struct clk i2c1_ck = {
+ .name = "i2c1_ck",
+ .parent = &per_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 1,
+ .enable_reg = I2CCLKCTRL_REG,
+};
+
+static struct clk i2c2_ck = {
+ .name = "i2c2_ck",
+ .parent = &per_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 2,
+ .enable_reg = USB_OTG_CLKCTRL_REG,
+};
+
+static struct clk spi0_ck = {
+ .name = "spi0_ck",
+ .parent = &hclk_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 0,
+ .enable_reg = SPICTRL_REG,
+};
+
+static struct clk spi1_ck = {
+ .name = "spi1_ck",
+ .parent = &hclk_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 4,
+ .enable_reg = SPICTRL_REG,
+};
+
+static struct clk dma_ck = {
+ .name = "dma_ck",
+ .parent = &hclk_ck,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 0,
+ .enable_reg = DMACLKCTRL_REG,
+};
+
+static struct clk uart3_ck = {
+ .name = "uart3_ck",
+ .parent = &per_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .rate = 1,
+ .enable_shift = 0,
+ .enable_reg = UARTCLKCTRL_REG,
+};
+
+static struct clk uart4_ck = {
+ .name = "uart4_ck",
+ .parent = &per_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 1,
+ .enable_reg = UARTCLKCTRL_REG,
+};
+
+static struct clk uart5_ck = {
+ .name = "uart5_ck",
+ .parent = &per_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .rate = 1,
+ .enable_shift = 2,
+ .enable_reg = UARTCLKCTRL_REG,
+};
+
+static struct clk uart6_ck = {
+ .name = "uart6_ck",
+ .parent = &per_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 3,
+ .enable_reg = UARTCLKCTRL_REG,
+};
+
+/* These clocks are visible outside this module
+ * and can be initialized
+ */
+static struct clk *onchip_clks[] = {
+ &ck_13MHz,
+ &ck_pll1,
+ &ck_pll4,
+ &ck_pll5,
+ &ck_pll3,
+ &vfp9_ck,
+ &m2hclk_ck,
+ &hclk_ck,
+ &dma_ck,
+ &flash_ck,
+ &dum_ck,
+ &keyscan_ck,
+ &pwm1_ck,
+ &pwm2_ck,
+ &jpeg_ck,
+ &ms_ck,
+ &touch_ck,
+ &i2c0_ck,
+ &i2c1_ck,
+ &i2c2_ck,
+ &spi0_ck,
+ &spi1_ck,
+ &uart3_ck,
+ &uart4_ck,
+ &uart5_ck,
+ &uart6_ck,
+};
+
+static int local_set_rate(struct clk *clk, u32 rate)
+{
+ int ret = -EINVAL;
+ if (clk->set_rate) {
+
+ if (clk->user_rate == clk->rate && clk->parent->rate) {
+ /* if clock enabled or rate not set */
+ clk->user_rate = clk->round_rate(clk, rate);
+ ret = clk->set_rate(clk, clk->user_rate);
+ } else
+ clk->user_rate = clk->round_rate(clk, rate);
+ ret = 0;
+ }
+ return ret;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ int ret = -EINVAL;
+
+ if (clk->flags & FIXED_RATE)
+ goto out;
+
+ clock_lock();
+ if ((clk->flags & PARENT_SET_RATE) && clk->parent) {
+
+ clk->user_rate = clk->round_rate(clk, rate);
+ /* parent clock needs to be refreshed
+ for the setting to take effect */
+ } else {
+ ret = local_set_rate(clk, rate);
+ }
+ ret = 0;
+ clock_unlock();
+
+out:
+ return ret;
+}
+
+EXPORT_SYMBOL(clk_set_rate);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ struct clk *clk = ERR_PTR(-ENOENT);
+ struct clk **clkp;
+
+ clock_lock();
+ for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
+ clkp++) {
+ if (strcmp(id, (*clkp)->name) == 0
+ && try_module_get((*clkp)->owner)) {
+ clk = (*clkp);
+ break;
+ }
+ }
+ clock_unlock();
+
+ return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+ clock_lock();
+ if (clk && !IS_ERR(clk))
+ module_put(clk->owner);
+ clock_unlock();
+}
+EXPORT_SYMBOL(clk_put);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ unsigned long ret;
+ clock_lock();
+ ret = clk->rate;
+ clock_unlock();
+ return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+static int local_clk_enable(struct clk *clk)
+{
+ int ret = 0;
+
+ if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate
+ && clk->user_rate)
+ ret = clk->set_rate(clk, clk->user_rate);
+ return ret;
+}
+
+static void local_clk_disable(struct clk *clk)
+{
+ if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate)
+ clk->set_rate(clk, 0);
+}
+
+int clk_enable(struct clk *clk)
+{
+ int ret = 0;
+
+ clock_lock();
+ ret = local_clk_enable(clk);
+ clock_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ clock_lock();
+ local_clk_disable(clk);
+ clock_unlock();
+}
+
+EXPORT_SYMBOL(clk_disable);
+
+static void local_clk_unuse(struct clk *clk)
+{
+ if (clk->usecount > 0 && !(--clk->usecount)) {
+ local_clk_disable(clk);
+ if (clk->parent)
+ local_clk_unuse(clk->parent);
+ }
+}
+
+static int local_clk_use(struct clk *clk)
+{
+ int ret = 0;
+ if (clk->usecount++ == 0) {
+ if (clk->parent)
+ ret = local_clk_use(clk->parent);
+
+ if (ret != 0) {
+ clk->usecount--;
+ goto out;
+ }
+
+ ret = local_clk_enable(clk);
+
+ if (ret != 0 && clk->parent) {
+ local_clk_unuse(clk->parent);
+ clk->usecount--;
+ }
+ }
+out:
+ return ret;
+}
+
+/* The main purpose of clk_use ans clk_unuse functions
+ * is to control switching 13MHz oscillator and PLL1 (13'MHz),
+ * so that they are disabled whenever none of PLL2-5 is using them.
+ * Although in theory these functions should work with any clock,
+ * please use them only on PLL2 - PLL5 to avoid confusion.
+ */
+int clk_use(struct clk *clk)
+{
+ int ret = 0;
+
+ clock_lock();
+ ret = local_clk_use(clk);
+ clock_unlock();
+ return ret;
+}
+EXPORT_SYMBOL(clk_use);
+
+void clk_unuse(struct clk *clk)
+{
+
+ clock_lock();
+ local_clk_unuse(clk);
+ clock_unlock();
+}
+
+EXPORT_SYMBOL(clk_unuse);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ long ret;
+ clock_lock();
+ if (clk->round_rate)
+ ret = clk->round_rate(clk, rate);
+ else
+ ret = clk->rate;
+ clock_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ int ret = -ENODEV;
+ if (!clk->set_parent)
+ goto out;
+
+ clock_lock();
+ ret = clk->set_parent(clk, parent);
+ if (!ret)
+ clk->parent = parent;
+ clock_unlock();
+
+out:
+ return ret;
+}
+
+EXPORT_SYMBOL(clk_set_parent);
+
+static int __init clk_init(void)
+{
+ struct clk **clkp;
+
+ /* Disable autoclocking, as it doesn't seem to work */
+ __raw_writel(0xff, AUTOCLK_CTRL);
+
+ for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
+ clkp++) {
+ if (((*clkp)->flags & NEEDS_INITIALIZATION)
+ && ((*clkp)->set_rate)) {
+ (*clkp)->user_rate = (*clkp)->rate;
+ local_set_rate((*clkp), (*clkp)->user_rate);
+ if ((*clkp)->set_parent)
+ (*clkp)->set_parent((*clkp), (*clkp)->parent);
+ }
+ pr_debug("%s: clock %s, rate %ld\n",
+ __FUNCTION__, (*clkp)->name, (*clkp)->rate);
+ }
+
+ clk_use(&ck_pll4);
+
+ /* if ck_13MHz is not used, disable it. */
+ if (ck_13MHz.usecount == 0)
+ local_clk_disable(&ck_13MHz);
+
+ /* Disable autoclocking */
+ __raw_writeb(0xff, AUTOCLK_CTRL);
+
+ return 0;
+}
+
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-pnx4008/clock.h b/arch/arm/mach-pnx4008/clock.h
new file mode 100644
index 000000000000..cd58f372cfd0
--- /dev/null
+++ b/arch/arm/mach-pnx4008/clock.h
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/mach-pnx4008/clock.h
+ *
+ * Clock control driver for PNX4008 - internal header file
+ *
+ * Author: Vitaly Wool <source@mvista.com>
+ *
+ * 2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ARCH_ARM_PNX4008_CLOCK_H__
+#define __ARCH_ARM_PNX4008_CLOCK_H__
+
+struct clk {
+ struct list_head node;
+ struct module *owner;
+ const char *name;
+ struct clk *parent;
+ struct clk *propagate_next;
+ u32 rate;
+ u32 user_rate;
+ s8 usecount;
+ u32 flags;
+ u32 scale_reg;
+ u8 enable_shift;
+ u32 enable_reg;
+ u8 enable_shift1;
+ u32 enable_reg1;
+ u32 parent_switch_reg;
+ u32(*round_rate) (struct clk *, u32);
+ int (*set_rate) (struct clk *, u32);
+ int (*set_parent) (struct clk * clk, struct clk * parent);
+};
+
+/* Flags */
+#define RATE_PROPAGATES (1<<0)
+#define NEEDS_INITIALIZATION (1<<1)
+#define PARENT_SET_RATE (1<<2)
+#define FIXED_RATE (1<<3)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
new file mode 100644
index 000000000000..ba91daad64fb
--- /dev/null
+++ b/arch/arm/mach-pnx4008/core.c
@@ -0,0 +1,207 @@
+/*
+ * arch/arm/mach-pnx4008/core.c
+ *
+ * PNX4008 core startup code
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev,
+ * Grigory Tolstolytkin, Dmitry Pervushin <source@mvista.com>
+ *
+ * Based on reference code received from Philips:
+ * Copyright (C) 2003 Philips Semiconductors
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/serial_8250.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/system.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <asm/arch/irq.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dma.h>
+
+struct resource spipnx_0_resources[] = {
+ {
+ .start = PNX4008_SPI1_BASE,
+ .end = PNX4008_SPI1_BASE + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = PER_SPI1_REC_XMIT,
+ .flags = IORESOURCE_DMA,
+ }, {
+ .start = SPI1_INT,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .flags = 0,
+ },
+};
+
+struct resource spipnx_1_resources[] = {
+ {
+ .start = PNX4008_SPI2_BASE,
+ .end = PNX4008_SPI2_BASE + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = PER_SPI2_REC_XMIT,
+ .flags = IORESOURCE_DMA,
+ }, {
+ .start = SPI2_INT,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+ {
+ .modalias = "m25p80",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 0,
+ },
+};
+
+static struct platform_device spipnx_1 = {
+ .name = "spipnx",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(spipnx_0_resources),
+ .resource = spipnx_0_resources,
+ .dev = {
+ .coherent_dma_mask = 0xFFFFFFFF,
+ },
+};
+
+static struct platform_device spipnx_2 = {
+ .name = "spipnx",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(spipnx_1_resources),
+ .resource = spipnx_1_resources,
+ .dev = {
+ .coherent_dma_mask = 0xFFFFFFFF,
+ },
+};
+
+static struct plat_serial8250_port platform_serial_ports[] = {
+ {
+ .membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART5_BASE)),
+ .mapbase = (unsigned long)PNX4008_UART5_BASE,
+ .irq = IIR5_INT,
+ .uartclk = PNX4008_UART_CLK,
+ .regshift = 2,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST,
+ },
+ {
+ .membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART3_BASE)),
+ .mapbase = (unsigned long)PNX4008_UART3_BASE,
+ .irq = IIR3_INT,
+ .uartclk = PNX4008_UART_CLK,
+ .regshift = 2,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST,
+ },
+ {}
+};
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = &platform_serial_ports,
+ },
+};
+
+static struct platform_device *devices[] __initdata = {
+ &spipnx_1,
+ &spipnx_2,
+ &serial_device,
+};
+
+
+extern void pnx4008_uart_init(void);
+
+static void __init pnx4008_init(void)
+{
+ /*disable all START interrupt sources,
+ and clear all START interrupt flags */
+ __raw_writel(0, START_INT_ER_REG(SE_PIN_BASE_INT));
+ __raw_writel(0, START_INT_ER_REG(SE_INT_BASE_INT));
+ __raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT));
+ __raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT));
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+ /* Switch on the UART clocks */
+ pnx4008_uart_init();
+}
+
+static struct map_desc pnx4008_io_desc[] __initdata = {
+ {
+ .virtual = IO_ADDRESS(PNX4008_IRAM_BASE),
+ .pfn = __phys_to_pfn(PNX4008_IRAM_BASE),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(PNX4008_NDF_FLASH_BASE),
+ .pfn = __phys_to_pfn(PNX4008_NDF_FLASH_BASE),
+ .length = SZ_1M - SZ_128K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(PNX4008_JPEG_CONFIG_BASE),
+ .pfn = __phys_to_pfn(PNX4008_JPEG_CONFIG_BASE),
+ .length = SZ_128K * 3,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(PNX4008_DMA_CONFIG_BASE),
+ .pfn = __phys_to_pfn(PNX4008_DMA_CONFIG_BASE),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(PNX4008_AHB2FAB_BASE),
+ .pfn = __phys_to_pfn(PNX4008_AHB2FAB_BASE),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init pnx4008_map_io(void)
+{
+ iotable_init(pnx4008_io_desc, ARRAY_SIZE(pnx4008_io_desc));
+}
+
+extern struct sys_timer pnx4008_timer;
+
+MACHINE_START(PNX4008, "Philips PNX4008")
+ /* Maintainer: MontaVista Software Inc. */
+ .phys_io = 0x40090000,
+ .io_pg_offst = (0xf4090000 >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = pnx4008_map_io,
+ .init_irq = pnx4008_init_irq,
+ .init_machine = pnx4008_init,
+ .timer = &pnx4008_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
new file mode 100644
index 000000000000..981aa9dcdede
--- /dev/null
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -0,0 +1,1109 @@
+/*
+ * linux/arch/arm/mach-pnx4008/dma.c
+ *
+ * PNX4008 DMA registration and IRQ dispatching
+ *
+ * Author: Vitaly Wool
+ * Copyright: MontaVista Software Inc. (c) 2005
+ *
+ * Based on the code from Nicolas Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/dma.h>
+#include <asm/dma-mapping.h>
+#include <asm/io.h>
+#include <asm/mach/dma.h>
+#include <asm/arch/clock.h>
+
+static struct dma_channel {
+ char *name;
+ void (*irq_handler) (int, int, void *, struct pt_regs *);
+ void *data;
+ struct pnx4008_dma_ll *ll;
+ u32 ll_dma;
+ void *target_addr;
+ int target_id;
+} dma_channels[MAX_DMA_CHANNELS];
+
+static struct ll_pool {
+ void *vaddr;
+ void *cur;
+ dma_addr_t dma_addr;
+ int count;
+} ll_pool;
+
+static spinlock_t ll_lock = SPIN_LOCK_UNLOCKED;
+
+struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t * ll_dma)
+{
+ struct pnx4008_dma_ll *ll = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ll_lock, flags);
+ if (ll_pool.count > 4) { /* can give one more */
+ ll = *(struct pnx4008_dma_ll **) ll_pool.cur;
+ *ll_dma = ll_pool.dma_addr + ((void *)ll - ll_pool.vaddr);
+ *(void **)ll_pool.cur = **(void ***)ll_pool.cur;
+ memset(ll, 0, sizeof(*ll));
+ ll_pool.count--;
+ }
+ spin_unlock_irqrestore(&ll_lock, flags);
+
+ return ll;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_alloc_ll_entry);
+
+void pnx4008_free_ll_entry(struct pnx4008_dma_ll * ll, dma_addr_t ll_dma)
+{
+ unsigned long flags;
+
+ if (ll) {
+ if ((unsigned long)((long)ll - (long)ll_pool.vaddr) > 0x4000) {
+ printk(KERN_ERR "Trying to free entry not allocated by DMA\n");
+ BUG();
+ }
+
+ if (ll->flags & DMA_BUFFER_ALLOCATED)
+ ll->free(ll->alloc_data);
+
+ spin_lock_irqsave(&ll_lock, flags);
+ *(long *)ll = *(long *)ll_pool.cur;
+ *(long *)ll_pool.cur = (long)ll;
+ ll_pool.count++;
+ spin_unlock_irqrestore(&ll_lock, flags);
+ }
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_free_ll_entry);
+
+void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll * ll)
+{
+ struct pnx4008_dma_ll *ptr;
+ u32 dma;
+
+ while (ll) {
+ dma = ll->next_dma;
+ ptr = ll->next;
+ pnx4008_free_ll_entry(ll, ll_dma);
+
+ ll_dma = dma;
+ ll = ptr;
+ }
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_free_ll);
+
+static int dma_channels_requested = 0;
+
+static inline void dma_increment_usage(void)
+{
+ if (!dma_channels_requested++) {
+ struct clk *clk = clk_get(0, "dma_ck");
+ if (!IS_ERR(clk)) {
+ clk_set_rate(clk, 1);
+ clk_put(clk);
+ }
+ pnx4008_config_dma(-1, -1, 1);
+ }
+}
+static inline void dma_decrement_usage(void)
+{
+ if (!--dma_channels_requested) {
+ struct clk *clk = clk_get(0, "dma_ck");
+ if (!IS_ERR(clk)) {
+ clk_set_rate(clk, 0);
+ clk_put(clk);
+ }
+ pnx4008_config_dma(-1, -1, 0);
+
+ }
+}
+
+static spinlock_t dma_lock = SPIN_LOCK_UNLOCKED;
+
+static inline void pnx4008_dma_lock(void)
+{
+ spin_lock_irq(&dma_lock);
+}
+
+static inline void pnx4008_dma_unlock(void)
+{
+ spin_unlock_irq(&dma_lock);
+}
+
+#define VALID_CHANNEL(c) (((c) >= 0) && ((c) < MAX_DMA_CHANNELS))
+
+int pnx4008_request_channel(char *name, int ch,
+ void (*irq_handler) (int, int, void *,
+ struct pt_regs *), void *data)
+{
+ int i, found = 0;
+
+ /* basic sanity checks */
+ if (!name || (ch != -1 && !VALID_CHANNEL(ch)))
+ return -EINVAL;
+
+ pnx4008_dma_lock();
+
+ /* try grabbing a DMA channel with the requested priority */
+ for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) {
+ if (!dma_channels[i].name && (ch == -1 || ch == i)) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found) {
+ dma_increment_usage();
+ dma_channels[i].name = name;
+ dma_channels[i].irq_handler = irq_handler;
+ dma_channels[i].data = data;
+ dma_channels[i].ll = NULL;
+ dma_channels[i].ll_dma = 0;
+ } else {
+ printk(KERN_WARNING "No more available DMA channels for %s\n",
+ name);
+ i = -ENODEV;
+ }
+
+ pnx4008_dma_unlock();
+ return i;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_request_channel);
+
+void pnx4008_free_channel(int ch)
+{
+ if (!dma_channels[ch].name) {
+ printk(KERN_CRIT
+ "%s: trying to free channel %d which is already freed\n",
+ __FUNCTION__, ch);
+ return;
+ }
+
+ pnx4008_dma_lock();
+ pnx4008_free_ll(dma_channels[ch].ll_dma, dma_channels[ch].ll);
+ dma_channels[ch].ll = NULL;
+ dma_decrement_usage();
+
+ dma_channels[ch].name = NULL;
+ pnx4008_dma_unlock();
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_free_channel);
+
+int pnx4008_config_dma(int ahb_m1_be, int ahb_m2_be, int enable)
+{
+ unsigned long dma_cfg = __raw_readl(DMAC_CONFIG);
+
+ switch (ahb_m1_be) {
+ case 0:
+ dma_cfg &= ~(1 << 1);
+ break;
+ case 1:
+ dma_cfg |= (1 << 1);
+ break;
+ default:
+ break;
+ }
+
+ switch (ahb_m2_be) {
+ case 0:
+ dma_cfg &= ~(1 << 2);
+ break;
+ case 1:
+ dma_cfg |= (1 << 2);
+ break;
+ default:
+ break;
+ }
+
+ switch (enable) {
+ case 0:
+ dma_cfg &= ~(1 << 0);
+ break;
+ case 1:
+ dma_cfg |= (1 << 0);
+ break;
+ default:
+ break;
+ }
+
+ pnx4008_dma_lock();
+ __raw_writel(dma_cfg, DMAC_CONFIG);
+ pnx4008_dma_unlock();
+
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_config_dma);
+
+int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl * ch_ctrl,
+ unsigned long *ctrl)
+{
+ int i = 0, dbsize, sbsize, err = 0;
+
+ if (!ctrl || !ch_ctrl) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ *ctrl = 0;
+
+ switch (ch_ctrl->tc_mask) {
+ case 0:
+ break;
+ case 1:
+ *ctrl |= (1 << 31);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+
+ switch (ch_ctrl->cacheable) {
+ case 0:
+ break;
+ case 1:
+ *ctrl |= (1 << 30);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_ctrl->bufferable) {
+ case 0:
+ break;
+ case 1:
+ *ctrl |= (1 << 29);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_ctrl->priv_mode) {
+ case 0:
+ break;
+ case 1:
+ *ctrl |= (1 << 28);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_ctrl->di) {
+ case 0:
+ break;
+ case 1:
+ *ctrl |= (1 << 27);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_ctrl->si) {
+ case 0:
+ break;
+ case 1:
+ *ctrl |= (1 << 26);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_ctrl->dest_ahb1) {
+ case 0:
+ break;
+ case 1:
+ *ctrl |= (1 << 25);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_ctrl->src_ahb1) {
+ case 0:
+ break;
+ case 1:
+ *ctrl |= (1 << 24);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_ctrl->dwidth) {
+ case WIDTH_BYTE:
+ *ctrl &= ~(7 << 21);
+ break;
+ case WIDTH_HWORD:
+ *ctrl &= ~(7 << 21);
+ *ctrl |= (1 << 21);
+ break;
+ case WIDTH_WORD:
+ *ctrl &= ~(7 << 21);
+ *ctrl |= (2 << 21);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_ctrl->swidth) {
+ case WIDTH_BYTE:
+ *ctrl &= ~(7 << 18);
+ break;
+ case WIDTH_HWORD:
+ *ctrl &= ~(7 << 18);
+ *ctrl |= (1 << 18);
+ break;
+ case WIDTH_WORD:
+ *ctrl &= ~(7 << 18);
+ *ctrl |= (2 << 18);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ dbsize = ch_ctrl->dbsize;
+ while (!(dbsize & 1)) {
+ i++;
+ dbsize >>= 1;
+ }
+ if (ch_ctrl->dbsize != 1 || i > 8 || i == 1) {
+ err = -EINVAL;
+ goto out;
+ } else if (i > 1)
+ i--;
+ *ctrl &= ~(7 << 15);
+ *ctrl |= (i << 15);
+
+ sbsize = ch_ctrl->sbsize;
+ while (!(sbsize & 1)) {
+ i++;
+ sbsize >>= 1;
+ }
+ if (ch_ctrl->sbsize != 1 || i > 8 || i == 1) {
+ err = -EINVAL;
+ goto out;
+ } else if (i > 1)
+ i--;
+ *ctrl &= ~(7 << 12);
+ *ctrl |= (i << 12);
+
+ if (ch_ctrl->tr_size > 0x7ff) {
+ err = -E2BIG;
+ goto out;
+ }
+ *ctrl &= ~0x7ff;
+ *ctrl |= ch_ctrl->tr_size & 0x7ff;
+
+out:
+ return err;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_pack_control);
+
+int pnx4008_dma_parse_control(unsigned long ctrl,
+ struct pnx4008_dma_ch_ctrl * ch_ctrl)
+{
+ int err = 0;
+
+ if (!ch_ctrl) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ ch_ctrl->tr_size = ctrl & 0x7ff;
+ ctrl >>= 12;
+
+ ch_ctrl->sbsize = 1 << (ctrl & 7);
+ if (ch_ctrl->sbsize > 1)
+ ch_ctrl->sbsize <<= 1;
+ ctrl >>= 3;
+
+ ch_ctrl->dbsize = 1 << (ctrl & 7);
+ if (ch_ctrl->dbsize > 1)
+ ch_ctrl->dbsize <<= 1;
+ ctrl >>= 3;
+
+ switch (ctrl & 7) {
+ case 0:
+ ch_ctrl->swidth = WIDTH_BYTE;
+ break;
+ case 1:
+ ch_ctrl->swidth = WIDTH_HWORD;
+ break;
+ case 2:
+ ch_ctrl->swidth = WIDTH_WORD;
+ break;
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ ctrl >>= 3;
+
+ switch (ctrl & 7) {
+ case 0:
+ ch_ctrl->dwidth = WIDTH_BYTE;
+ break;
+ case 1:
+ ch_ctrl->dwidth = WIDTH_HWORD;
+ break;
+ case 2:
+ ch_ctrl->dwidth = WIDTH_WORD;
+ break;
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ ctrl >>= 3;
+
+ ch_ctrl->src_ahb1 = ctrl & 1;
+ ctrl >>= 1;
+
+ ch_ctrl->dest_ahb1 = ctrl & 1;
+ ctrl >>= 1;
+
+ ch_ctrl->si = ctrl & 1;
+ ctrl >>= 1;
+
+ ch_ctrl->di = ctrl & 1;
+ ctrl >>= 1;
+
+ ch_ctrl->priv_mode = ctrl & 1;
+ ctrl >>= 1;
+
+ ch_ctrl->bufferable = ctrl & 1;
+ ctrl >>= 1;
+
+ ch_ctrl->cacheable = ctrl & 1;
+ ctrl >>= 1;
+
+ ch_ctrl->tc_mask = ctrl & 1;
+
+out:
+ return err;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_parse_control);
+
+int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config * ch_cfg,
+ unsigned long *cfg)
+{
+ int err = 0;
+
+ if (!cfg || !ch_cfg) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ *cfg = 0;
+
+ switch (ch_cfg->halt) {
+ case 0:
+ break;
+ case 1:
+ *cfg |= (1 << 18);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_cfg->active) {
+ case 0:
+ break;
+ case 1:
+ *cfg |= (1 << 17);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_cfg->lock) {
+ case 0:
+ break;
+ case 1:
+ *cfg |= (1 << 16);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_cfg->itc) {
+ case 0:
+ break;
+ case 1:
+ *cfg |= (1 << 15);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_cfg->ie) {
+ case 0:
+ break;
+ case 1:
+ *cfg |= (1 << 14);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_cfg->flow_cntrl) {
+ case FC_MEM2MEM_DMA:
+ *cfg &= ~(7 << 11);
+ break;
+ case FC_MEM2PER_DMA:
+ *cfg &= ~(7 << 11);
+ *cfg |= (1 << 11);
+ break;
+ case FC_PER2MEM_DMA:
+ *cfg &= ~(7 << 11);
+ *cfg |= (2 << 11);
+ break;
+ case FC_PER2PER_DMA:
+ *cfg &= ~(7 << 11);
+ *cfg |= (3 << 11);
+ break;
+ case FC_PER2PER_DPER:
+ *cfg &= ~(7 << 11);
+ *cfg |= (4 << 11);
+ break;
+ case FC_MEM2PER_PER:
+ *cfg &= ~(7 << 11);
+ *cfg |= (5 << 11);
+ break;
+ case FC_PER2MEM_PER:
+ *cfg &= ~(7 << 11);
+ *cfg |= (6 << 11);
+ break;
+ case FC_PER2PER_SPER:
+ *cfg |= (7 << 11);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ *cfg &= ~(0x1f << 6);
+ *cfg |= ((ch_cfg->dest_per & 0x1f) << 6);
+
+ *cfg &= ~(0x1f << 1);
+ *cfg |= ((ch_cfg->src_per & 0x1f) << 1);
+
+out:
+ return err;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_pack_config);
+
+int pnx4008_dma_parse_config(unsigned long cfg,
+ struct pnx4008_dma_ch_config * ch_cfg)
+{
+ int err = 0;
+
+ if (!ch_cfg) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ cfg >>= 1;
+
+ ch_cfg->src_per = cfg & 0x1f;
+ cfg >>= 5;
+
+ ch_cfg->dest_per = cfg & 0x1f;
+ cfg >>= 5;
+
+ switch (cfg & 7) {
+ case 0:
+ ch_cfg->flow_cntrl = FC_MEM2MEM_DMA;
+ break;
+ case 1:
+ ch_cfg->flow_cntrl = FC_MEM2PER_DMA;
+ break;
+ case 2:
+ ch_cfg->flow_cntrl = FC_PER2MEM_DMA;
+ break;
+ case 3:
+ ch_cfg->flow_cntrl = FC_PER2PER_DMA;
+ break;
+ case 4:
+ ch_cfg->flow_cntrl = FC_PER2PER_DPER;
+ break;
+ case 5:
+ ch_cfg->flow_cntrl = FC_MEM2PER_PER;
+ break;
+ case 6:
+ ch_cfg->flow_cntrl = FC_PER2MEM_PER;
+ break;
+ case 7:
+ ch_cfg->flow_cntrl = FC_PER2PER_SPER;
+ }
+ cfg >>= 3;
+
+ ch_cfg->ie = cfg & 1;
+ cfg >>= 1;
+
+ ch_cfg->itc = cfg & 1;
+ cfg >>= 1;
+
+ ch_cfg->lock = cfg & 1;
+ cfg >>= 1;
+
+ ch_cfg->active = cfg & 1;
+ cfg >>= 1;
+
+ ch_cfg->halt = cfg & 1;
+
+out:
+ return err;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_parse_config);
+
+void pnx4008_dma_split_head_entry(struct pnx4008_dma_config * config,
+ struct pnx4008_dma_ch_ctrl * ctrl)
+{
+ int new_len = ctrl->tr_size, num_entries = 0;
+ int old_len = new_len;
+ int src_width, dest_width, count = 1;
+
+ switch (ctrl->swidth) {
+ case WIDTH_BYTE:
+ src_width = 1;
+ break;
+ case WIDTH_HWORD:
+ src_width = 2;
+ break;
+ case WIDTH_WORD:
+ src_width = 4;
+ break;
+ default:
+ return;
+ }
+
+ switch (ctrl->dwidth) {
+ case WIDTH_BYTE:
+ dest_width = 1;
+ break;
+ case WIDTH_HWORD:
+ dest_width = 2;
+ break;
+ case WIDTH_WORD:
+ dest_width = 4;
+ break;
+ default:
+ return;
+ }
+
+ while (new_len > 0x7FF) {
+ num_entries++;
+ new_len = (ctrl->tr_size + num_entries) / (num_entries + 1);
+ }
+ if (num_entries != 0) {
+ struct pnx4008_dma_ll *ll = NULL;
+ config->ch_ctrl &= ~0x7ff;
+ config->ch_ctrl |= new_len;
+ if (!config->is_ll) {
+ config->is_ll = 1;
+ while (num_entries) {
+ if (!ll) {
+ config->ll =
+ pnx4008_alloc_ll_entry(&config->
+ ll_dma);
+ ll = config->ll;
+ } else {
+ ll->next =
+ pnx4008_alloc_ll_entry(&ll->
+ next_dma);
+ ll = ll->next;
+ }
+
+ if (ctrl->si)
+ ll->src_addr =
+ config->src_addr +
+ src_width * new_len * count;
+ else
+ ll->src_addr = config->src_addr;
+ if (ctrl->di)
+ ll->dest_addr =
+ config->dest_addr +
+ dest_width * new_len * count;
+ else
+ ll->dest_addr = config->dest_addr;
+ ll->ch_ctrl = config->ch_ctrl & 0x7fffffff;
+ ll->next_dma = 0;
+ ll->next = NULL;
+ num_entries--;
+ count++;
+ }
+ } else {
+ struct pnx4008_dma_ll *ll_old = config->ll;
+ unsigned long ll_dma_old = config->ll_dma;
+ while (num_entries) {
+ if (!ll) {
+ config->ll =
+ pnx4008_alloc_ll_entry(&config->
+ ll_dma);
+ ll = config->ll;
+ } else {
+ ll->next =
+ pnx4008_alloc_ll_entry(&ll->
+ next_dma);
+ ll = ll->next;
+ }
+
+ if (ctrl->si)
+ ll->src_addr =
+ config->src_addr +
+ src_width * new_len * count;
+ else
+ ll->src_addr = config->src_addr;
+ if (ctrl->di)
+ ll->dest_addr =
+ config->dest_addr +
+ dest_width * new_len * count;
+ else
+ ll->dest_addr = config->dest_addr;
+ ll->ch_ctrl = config->ch_ctrl & 0x7fffffff;
+ ll->next_dma = 0;
+ ll->next = NULL;
+ num_entries--;
+ count++;
+ }
+ ll->next_dma = ll_dma_old;
+ ll->next = ll_old;
+ }
+ /* adjust last length/tc */
+ ll->ch_ctrl = config->ch_ctrl & (~0x7ff);
+ ll->ch_ctrl |= old_len - new_len * (count - 1);
+ config->ch_ctrl &= 0x7fffffff;
+ }
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_split_head_entry);
+
+void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll * cur_ll,
+ struct pnx4008_dma_ch_ctrl * ctrl)
+{
+ int new_len = ctrl->tr_size, num_entries = 0;
+ int old_len = new_len;
+ int src_width, dest_width, count = 1;
+
+ switch (ctrl->swidth) {
+ case WIDTH_BYTE:
+ src_width = 1;
+ break;
+ case WIDTH_HWORD:
+ src_width = 2;
+ break;
+ case WIDTH_WORD:
+ src_width = 4;
+ break;
+ default:
+ return;
+ }
+
+ switch (ctrl->dwidth) {
+ case WIDTH_BYTE:
+ dest_width = 1;
+ break;
+ case WIDTH_HWORD:
+ dest_width = 2;
+ break;
+ case WIDTH_WORD:
+ dest_width = 4;
+ break;
+ default:
+ return;
+ }
+
+ while (new_len > 0x7FF) {
+ num_entries++;
+ new_len = (ctrl->tr_size + num_entries) / (num_entries + 1);
+ }
+ if (num_entries != 0) {
+ struct pnx4008_dma_ll *ll = NULL;
+ cur_ll->ch_ctrl &= ~0x7ff;
+ cur_ll->ch_ctrl |= new_len;
+ if (!cur_ll->next) {
+ while (num_entries) {
+ if (!ll) {
+ cur_ll->next =
+ pnx4008_alloc_ll_entry(&cur_ll->
+ next_dma);
+ ll = cur_ll->next;
+ } else {
+ ll->next =
+ pnx4008_alloc_ll_entry(&ll->
+ next_dma);
+ ll = ll->next;
+ }
+
+ if (ctrl->si)
+ ll->src_addr =
+ cur_ll->src_addr +
+ src_width * new_len * count;
+ else
+ ll->src_addr = cur_ll->src_addr;
+ if (ctrl->di)
+ ll->dest_addr =
+ cur_ll->dest_addr +
+ dest_width * new_len * count;
+ else
+ ll->dest_addr = cur_ll->dest_addr;
+ ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff;
+ ll->next_dma = 0;
+ ll->next = NULL;
+ num_entries--;
+ count++;
+ }
+ } else {
+ struct pnx4008_dma_ll *ll_old = cur_ll->next;
+ unsigned long ll_dma_old = cur_ll->next_dma;
+ while (num_entries) {
+ if (!ll) {
+ cur_ll->next =
+ pnx4008_alloc_ll_entry(&cur_ll->
+ next_dma);
+ ll = cur_ll->next;
+ } else {
+ ll->next =
+ pnx4008_alloc_ll_entry(&ll->
+ next_dma);
+ ll = ll->next;
+ }
+
+ if (ctrl->si)
+ ll->src_addr =
+ cur_ll->src_addr +
+ src_width * new_len * count;
+ else
+ ll->src_addr = cur_ll->src_addr;
+ if (ctrl->di)
+ ll->dest_addr =
+ cur_ll->dest_addr +
+ dest_width * new_len * count;
+ else
+ ll->dest_addr = cur_ll->dest_addr;
+ ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff;
+ ll->next_dma = 0;
+ ll->next = NULL;
+ num_entries--;
+ count++;
+ }
+
+ ll->next_dma = ll_dma_old;
+ ll->next = ll_old;
+ }
+ /* adjust last length/tc */
+ ll->ch_ctrl = cur_ll->ch_ctrl & (~0x7ff);
+ ll->ch_ctrl |= old_len - new_len * (count - 1);
+ cur_ll->ch_ctrl &= 0x7fffffff;
+ }
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_split_ll_entry);
+
+int pnx4008_config_channel(int ch, struct pnx4008_dma_config * config)
+{
+ if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
+ return -EINVAL;
+
+ pnx4008_dma_lock();
+ __raw_writel(config->src_addr, DMAC_Cx_SRC_ADDR(ch));
+ __raw_writel(config->dest_addr, DMAC_Cx_DEST_ADDR(ch));
+
+ if (config->is_ll)
+ __raw_writel(config->ll_dma, DMAC_Cx_LLI(ch));
+ else
+ __raw_writel(0, DMAC_Cx_LLI(ch));
+
+ __raw_writel(config->ch_ctrl, DMAC_Cx_CONTROL(ch));
+ __raw_writel(config->ch_cfg, DMAC_Cx_CONFIG(ch));
+ pnx4008_dma_unlock();
+
+ return 0;
+
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_config_channel);
+
+int pnx4008_channel_get_config(int ch, struct pnx4008_dma_config * config)
+{
+ if (!VALID_CHANNEL(ch) || !dma_channels[ch].name || !config)
+ return -EINVAL;
+
+ pnx4008_dma_lock();
+ config->ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
+ config->ch_ctrl = __raw_readl(DMAC_Cx_CONTROL(ch));
+
+ config->ll_dma = __raw_readl(DMAC_Cx_LLI(ch));
+ config->is_ll = config->ll_dma ? 1 : 0;
+
+ config->src_addr = __raw_readl(DMAC_Cx_SRC_ADDR(ch));
+ config->dest_addr = __raw_readl(DMAC_Cx_DEST_ADDR(ch));
+ pnx4008_dma_unlock();
+
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_channel_get_config);
+
+int pnx4008_dma_ch_enable(int ch)
+{
+ unsigned long ch_cfg;
+
+ if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
+ return -EINVAL;
+
+ pnx4008_dma_lock();
+ ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
+ ch_cfg |= 1;
+ __raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch));
+ pnx4008_dma_unlock();
+
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enable);
+
+int pnx4008_dma_ch_disable(int ch)
+{
+ unsigned long ch_cfg;
+
+ if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
+ return -EINVAL;
+
+ pnx4008_dma_lock();
+ ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
+ ch_cfg &= ~1;
+ __raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch));
+ pnx4008_dma_unlock();
+
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_ch_disable);
+
+int pnx4008_dma_ch_enabled(int ch)
+{
+ unsigned long ch_cfg;
+
+ if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
+ return -EINVAL;
+
+ pnx4008_dma_lock();
+ ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
+ pnx4008_dma_unlock();
+
+ return ch_cfg & 1;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enabled);
+
+static irqreturn_t dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+ int i;
+ unsigned long dint = __raw_readl(DMAC_INT_STAT);
+ unsigned long tcint = __raw_readl(DMAC_INT_TC_STAT);
+ unsigned long eint = __raw_readl(DMAC_INT_ERR_STAT);
+ unsigned long i_bit;
+
+ for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) {
+ i_bit = 1 << i;
+ if (dint & i_bit) {
+ struct dma_channel *channel = &dma_channels[i];
+
+ if (channel->name && channel->irq_handler) {
+ int cause = 0;
+
+ if (eint & i_bit)
+ cause |= DMA_ERR_INT;
+ if (tcint & i_bit)
+ cause |= DMA_TC_INT;
+ channel->irq_handler(i, cause, channel->data,
+ regs);
+ } else {
+ /*
+ * IRQ for an unregistered DMA channel
+ */
+ printk(KERN_WARNING
+ "spurious IRQ for DMA channel %d\n", i);
+ }
+ if (tcint & i_bit)
+ __raw_writel(i_bit, DMAC_INT_TC_CLEAR);
+ if (eint & i_bit)
+ __raw_writel(i_bit, DMAC_INT_ERR_CLEAR);
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+static int __init pnx4008_dma_init(void)
+{
+ int ret, i;
+
+ ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
+ if (ret) {
+ printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n");
+ goto out;
+ }
+
+ ll_pool.count = 0x4000 / sizeof(struct pnx4008_dma_ll);
+ ll_pool.cur = ll_pool.vaddr =
+ dma_alloc_coherent(NULL, ll_pool.count * sizeof(struct pnx4008_dma_ll),
+ &ll_pool.dma_addr, GFP_KERNEL);
+
+ if (!ll_pool.vaddr) {
+ ret = -ENOMEM;
+ free_irq(DMA_INT, NULL);
+ goto out;
+ }
+
+ for (i = 0; i < ll_pool.count - 1; i++) {
+ void **addr = ll_pool.vaddr + i * sizeof(struct pnx4008_dma_ll);
+ *addr = (void *)addr + sizeof(struct pnx4008_dma_ll);
+ }
+ *(long *)(ll_pool.vaddr +
+ (ll_pool.count - 1) * sizeof(struct pnx4008_dma_ll)) =
+ (long)ll_pool.vaddr;
+
+ __raw_writel(1, DMAC_CONFIG);
+
+out:
+ return ret;
+}
+arch_initcall(pnx4008_dma_init);
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
new file mode 100644
index 000000000000..e1ce050d8fe0
--- /dev/null
+++ b/arch/arm/mach-pnx4008/gpio.c
@@ -0,0 +1,330 @@
+/*
+ * arch/arm/mach-pnx4008/gpio.c
+ *
+ * PNX4008 GPIO driver
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
+ * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/semaphore.h>
+#include <asm/io.h>
+#include <asm/arch/platform.h>
+#include <asm/arch/gpio.h>
+
+/* register definitions */
+#define PIO_VA_BASE IO_ADDRESS(PNX4008_PIO_BASE)
+
+#define PIO_INP_STATE (0x00U)
+#define PIO_OUTP_SET (0x04U)
+#define PIO_OUTP_CLR (0x08U)
+#define PIO_OUTP_STATE (0x0CU)
+#define PIO_DRV_SET (0x10U)
+#define PIO_DRV_CLR (0x14U)
+#define PIO_DRV_STATE (0x18U)
+#define PIO_SDINP_STATE (0x1CU)
+#define PIO_SDOUTP_SET (0x20U)
+#define PIO_SDOUTP_CLR (0x24U)
+#define PIO_MUX_SET (0x28U)
+#define PIO_MUX_CLR (0x2CU)
+#define PIO_MUX_STATE (0x30U)
+
+static inline void gpio_lock(void)
+{
+ local_irq_disable();
+}
+
+static inline void gpio_unlock(void)
+{
+ local_irq_enable();
+}
+
+/* Inline functions */
+static inline int gpio_read_bit(u32 reg, int gpio)
+{
+ u32 bit, val;
+ int ret = -EFAULT;
+
+ if (gpio < 0)
+ goto out;
+
+ bit = GPIO_BIT(gpio);
+ if (bit) {
+ val = __raw_readl(PIO_VA_BASE + reg);
+ ret = (val & bit) ? 1 : 0;
+ }
+out:
+ return ret;
+}
+
+static inline int gpio_set_bit(u32 reg, int gpio)
+{
+ u32 bit, val;
+ int ret = -EFAULT;
+
+ if (gpio < 0)
+ goto out;
+
+ bit = GPIO_BIT(gpio);
+ if (bit) {
+ val = __raw_readl(PIO_VA_BASE + reg);
+ val |= bit;
+ __raw_writel(val, PIO_VA_BASE + reg);
+ ret = 0;
+ }
+out:
+ return ret;
+}
+
+/* Very simple access control, bitmap for allocated/free */
+static unsigned long access_map[4];
+#define INP_INDEX 0
+#define OUTP_INDEX 1
+#define GPIO_INDEX 2
+#define MUX_INDEX 3
+
+/*GPIO to Input Mapping */
+static short gpio_to_inp_map[32] = {
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, 10, 11, 12, 13, 14, 24, -1
+};
+
+/*GPIO to Mux Mapping */
+static short gpio_to_mux_map[32] = {
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, 0, 1, 4, 5, -1
+};
+
+/*Output to Mux Mapping */
+static short outp_to_mux_map[32] = {
+ -1, -1, -1, 6, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, 2, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1
+};
+
+int pnx4008_gpio_register_pin(unsigned short pin)
+{
+ unsigned long bit = GPIO_BIT(pin);
+ int ret = -EBUSY; /* Already in use */
+
+ gpio_lock();
+
+ if (GPIO_ISBID(pin)) {
+ if (access_map[GPIO_INDEX] & bit)
+ goto out;
+ access_map[GPIO_INDEX] |= bit;
+
+ } else if (GPIO_ISRAM(pin)) {
+ if (access_map[GPIO_INDEX] & bit)
+ goto out;
+ access_map[GPIO_INDEX] |= bit;
+
+ } else if (GPIO_ISMUX(pin)) {
+ if (access_map[MUX_INDEX] & bit)
+ goto out;
+ access_map[MUX_INDEX] |= bit;
+
+ } else if (GPIO_ISOUT(pin)) {
+ if (access_map[OUTP_INDEX] & bit)
+ goto out;
+ access_map[OUTP_INDEX] |= bit;
+
+ } else if (GPIO_ISIN(pin)) {
+ if (access_map[INP_INDEX] & bit)
+ goto out;
+ access_map[INP_INDEX] |= bit;
+ } else
+ goto out;
+ ret = 0;
+
+out:
+ gpio_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_register_pin);
+
+int pnx4008_gpio_unregister_pin(unsigned short pin)
+{
+ unsigned long bit = GPIO_BIT(pin);
+ int ret = -EFAULT; /* Not registered */
+
+ gpio_lock();
+
+ if (GPIO_ISBID(pin)) {
+ if (~access_map[GPIO_INDEX] & bit)
+ goto out;
+ access_map[GPIO_INDEX] &= ~bit;
+ } else if (GPIO_ISRAM(pin)) {
+ if (~access_map[GPIO_INDEX] & bit)
+ goto out;
+ access_map[GPIO_INDEX] &= ~bit;
+ } else if (GPIO_ISMUX(pin)) {
+ if (~access_map[MUX_INDEX] & bit)
+ goto out;
+ access_map[MUX_INDEX] &= ~bit;
+ } else if (GPIO_ISOUT(pin)) {
+ if (~access_map[OUTP_INDEX] & bit)
+ goto out;
+ access_map[OUTP_INDEX] &= ~bit;
+ } else if (GPIO_ISIN(pin)) {
+ if (~access_map[INP_INDEX] & bit)
+ goto out;
+ access_map[INP_INDEX] &= ~bit;
+ } else
+ goto out;
+ ret = 0;
+
+out:
+ gpio_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_unregister_pin);
+
+unsigned long pnx4008_gpio_read_pin(unsigned short pin)
+{
+ unsigned long ret = -EFAULT;
+ int gpio = GPIO_BIT_MASK(pin);
+ gpio_lock();
+ if (GPIO_ISOUT(pin)) {
+ ret = gpio_read_bit(PIO_OUTP_STATE, gpio);
+ } else if (GPIO_ISRAM(pin)) {
+ if (gpio_read_bit(PIO_DRV_STATE, gpio) == 0) {
+ ret = gpio_read_bit(PIO_SDINP_STATE, gpio);
+ }
+ } else if (GPIO_ISBID(pin)) {
+ ret = gpio_read_bit(PIO_DRV_STATE, gpio);
+ if (ret > 0)
+ ret = gpio_read_bit(PIO_OUTP_STATE, gpio);
+ else if (ret == 0)
+ ret =
+ gpio_read_bit(PIO_INP_STATE, gpio_to_inp_map[gpio]);
+ } else if (GPIO_ISIN(pin)) {
+ ret = gpio_read_bit(PIO_INP_STATE, gpio);
+ }
+ gpio_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_read_pin);
+
+/* Write Value to output */
+int pnx4008_gpio_write_pin(unsigned short pin, int output)
+{
+ int gpio = GPIO_BIT_MASK(pin);
+ int ret = -EFAULT;
+
+ gpio_lock();
+ if (GPIO_ISOUT(pin)) {
+ printk( "writing '%x' to '%x'\n",
+ gpio, output ? PIO_OUTP_SET : PIO_OUTP_CLR );
+ ret = gpio_set_bit(output ? PIO_OUTP_SET : PIO_OUTP_CLR, gpio);
+ } else if (GPIO_ISRAM(pin)) {
+ if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0)
+ ret = gpio_set_bit(output ? PIO_SDOUTP_SET :
+ PIO_SDOUTP_CLR, gpio);
+ } else if (GPIO_ISBID(pin)) {
+ if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0)
+ ret = gpio_set_bit(output ? PIO_OUTP_SET :
+ PIO_OUTP_CLR, gpio);
+ }
+ gpio_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_write_pin);
+
+/* Value = 1 : Set GPIO pin as output */
+/* Value = 0 : Set GPIO pin as input */
+int pnx4008_gpio_set_pin_direction(unsigned short pin, int output)
+{
+ int gpio = GPIO_BIT_MASK(pin);
+ int ret = -EFAULT;
+
+ gpio_lock();
+ if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) {
+ ret = gpio_set_bit(output ? PIO_DRV_SET : PIO_DRV_CLR, gpio);
+ }
+ gpio_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_set_pin_direction);
+
+/* Read GPIO pin direction: 0= pin used as input, 1= pin used as output*/
+int pnx4008_gpio_read_pin_direction(unsigned short pin)
+{
+ int gpio = GPIO_BIT_MASK(pin);
+ int ret = -EFAULT;
+
+ gpio_lock();
+ if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) {
+ ret = gpio_read_bit(PIO_DRV_STATE, gpio);
+ }
+ gpio_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_read_pin_direction);
+
+/* Value = 1 : Set pin to muxed function */
+/* Value = 0 : Set pin as GPIO */
+int pnx4008_gpio_set_pin_mux(unsigned short pin, int output)
+{
+ int gpio = GPIO_BIT_MASK(pin);
+ int ret = -EFAULT;
+
+ gpio_lock();
+ if (GPIO_ISBID(pin)) {
+ ret =
+ gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR,
+ gpio_to_mux_map[gpio]);
+ } else if (GPIO_ISOUT(pin)) {
+ ret =
+ gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR,
+ outp_to_mux_map[gpio]);
+ } else if (GPIO_ISMUX(pin)) {
+ ret = gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR, gpio);
+ }
+ gpio_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_set_pin_mux);
+
+/* Read pin mux function: 0= pin used as GPIO, 1= pin used for muxed function*/
+int pnx4008_gpio_read_pin_mux(unsigned short pin)
+{
+ int gpio = GPIO_BIT_MASK(pin);
+ int ret = -EFAULT;
+
+ gpio_lock();
+ if (GPIO_ISBID(pin)) {
+ ret = gpio_read_bit(PIO_MUX_STATE, gpio_to_mux_map[gpio]);
+ } else if (GPIO_ISOUT(pin)) {
+ ret = gpio_read_bit(PIO_MUX_STATE, outp_to_mux_map[gpio]);
+ } else if (GPIO_ISMUX(pin)) {
+ ret = gpio_read_bit(PIO_MUX_STATE, gpio);
+ }
+ gpio_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_read_pin_mux);
diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c
new file mode 100644
index 000000000000..9b0a8e084e99
--- /dev/null
+++ b/arch/arm/mach-pnx4008/irq.c
@@ -0,0 +1,121 @@
+/*
+ * arch/arm/mach-pnx4008/irq.c
+ *
+ * PNX4008 IRQ controller driver
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * Based on reference code received from Philips:
+ * Copyright (C) 2003 Philips Semiconductors
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/arch/irq.h>
+
+static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES;
+
+static void pnx4008_mask_irq(unsigned int irq)
+{
+ __raw_writel(__raw_readl(INTC_ER(irq)) & ~INTC_BIT(irq), INTC_ER(irq)); /* mask interrupt */
+}
+
+static void pnx4008_unmask_irq(unsigned int irq)
+{
+ __raw_writel(__raw_readl(INTC_ER(irq)) | INTC_BIT(irq), INTC_ER(irq)); /* unmask interrupt */
+}
+
+static void pnx4008_mask_ack_irq(unsigned int irq)
+{
+ __raw_writel(__raw_readl(INTC_ER(irq)) & ~INTC_BIT(irq), INTC_ER(irq)); /* mask interrupt */
+ __raw_writel(INTC_BIT(irq), INTC_SR(irq)); /* clear interrupt status */
+}
+
+static int pnx4008_set_irq_type(unsigned int irq, unsigned int type)
+{
+ switch (type) {
+ case IRQT_RISING:
+ __raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */
+ __raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /*rising edge */
+ set_irq_handler(irq, do_edge_IRQ);
+ break;
+ case IRQT_FALLING:
+ __raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */
+ __raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*falling edge */
+ set_irq_handler(irq, do_edge_IRQ);
+ break;
+ case IRQT_LOW:
+ __raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */
+ __raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*low level */
+ set_irq_handler(irq, do_level_IRQ);
+ break;
+ case IRQT_HIGH:
+ __raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */
+ __raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /* high level */
+ set_irq_handler(irq, do_level_IRQ);
+ break;
+
+ /* IRQT_BOTHEDGE is not supported */
+ default:
+ printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type);
+ return -1;
+ }
+ return 0;
+}
+
+static struct irqchip pnx4008_irq_chip = {
+ .ack = pnx4008_mask_ack_irq,
+ .mask = pnx4008_mask_irq,
+ .unmask = pnx4008_unmask_irq,
+ .set_type = pnx4008_set_irq_type,
+};
+
+void __init pnx4008_init_irq(void)
+{
+ unsigned int i;
+
+ /* configure and enable IRQ 0,1,30,31 (cascade interrupts) mask all others */
+ pnx4008_set_irq_type(SUB1_IRQ_N, pnx4008_irq_type[SUB1_IRQ_N]);
+ pnx4008_set_irq_type(SUB2_IRQ_N, pnx4008_irq_type[SUB2_IRQ_N]);
+ pnx4008_set_irq_type(SUB1_FIQ_N, pnx4008_irq_type[SUB1_FIQ_N]);
+ pnx4008_set_irq_type(SUB2_FIQ_N, pnx4008_irq_type[SUB2_FIQ_N]);
+
+ __raw_writel((1 << SUB2_FIQ_N) | (1 << SUB1_FIQ_N) |
+ (1 << SUB2_IRQ_N) | (1 << SUB1_IRQ_N),
+ INTC_ER(MAIN_BASE_INT));
+ __raw_writel(0, INTC_ER(SIC1_BASE_INT));
+ __raw_writel(0, INTC_ER(SIC2_BASE_INT));
+
+ /* configure all other IRQ's */
+ for (i = 0; i < NR_IRQS; i++) {
+ if (i == SUB2_FIQ_N || i == SUB1_FIQ_N ||
+ i == SUB2_IRQ_N || i == SUB1_IRQ_N)
+ continue;
+ set_irq_flags(i, IRQF_VALID);
+ set_irq_chip(i, &pnx4008_irq_chip);
+ pnx4008_set_irq_type(i, pnx4008_irq_type[i]);
+ }
+}
+
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
new file mode 100644
index 000000000000..3649cd3dfc9a
--- /dev/null
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -0,0 +1,184 @@
+/*
+ * arch/arm/mach-pnx4008/pm.c
+ *
+ * Power Management driver for PNX4008
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/pm.h>
+#include <linux/rtc.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/cacheflush.h>
+#include <asm/arch/pm.h>
+#include <asm/arch/clock.h>
+
+#define SRAM_VA IO_ADDRESS(PNX4008_IRAM_BASE)
+
+static void *saved_sram;
+
+static struct clk *pll4_clk;
+
+static inline void pnx4008_standby(void)
+{
+ void (*pnx4008_cpu_standby_ptr) (void);
+
+ local_irq_disable();
+ local_fiq_disable();
+
+ clk_disable(pll4_clk);
+
+ /*saving portion of SRAM to be used by suspend function. */
+ memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_standby_sz);
+
+ /*make sure SRAM copy gets physically written into SDRAM.
+ SDRAM will be placed into self-refresh during power down */
+ flush_cache_all();
+
+ /*copy suspend function into SRAM */
+ memcpy((void *)SRAM_VA, pnx4008_cpu_standby, pnx4008_cpu_standby_sz);
+
+ /*do suspend */
+ pnx4008_cpu_standby_ptr = (void *)SRAM_VA;
+ pnx4008_cpu_standby_ptr();
+
+ /*restoring portion of SRAM that was used by suspend function */
+ memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_standby_sz);
+
+ clk_enable(pll4_clk);
+
+ local_fiq_enable();
+ local_irq_enable();
+}
+
+static inline void pnx4008_suspend(void)
+{
+ void (*pnx4008_cpu_suspend_ptr) (void);
+
+ local_irq_disable();
+ local_fiq_disable();
+
+ clk_disable(pll4_clk);
+
+ __raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT));
+ __raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT));
+
+ /*saving portion of SRAM to be used by suspend function. */
+ memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_suspend_sz);
+
+ /*make sure SRAM copy gets physically written into SDRAM.
+ SDRAM will be placed into self-refresh during power down */
+ flush_cache_all();
+
+ /*copy suspend function into SRAM */
+ memcpy((void *)SRAM_VA, pnx4008_cpu_suspend, pnx4008_cpu_suspend_sz);
+
+ /*do suspend */
+ pnx4008_cpu_suspend_ptr = (void *)SRAM_VA;
+ pnx4008_cpu_suspend_ptr();
+
+ /*restoring portion of SRAM that was used by suspend function */
+ memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_suspend_sz);
+
+ clk_enable(pll4_clk);
+
+ local_fiq_enable();
+ local_irq_enable();
+}
+
+static int pnx4008_pm_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ pnx4008_standby();
+ break;
+ case PM_SUSPEND_MEM:
+ pnx4008_suspend();
+ break;
+ case PM_SUSPEND_DISK:
+ return -ENOTSUPP;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/*
+ * Called after processes are frozen, but before we shut down devices.
+ */
+static int pnx4008_pm_prepare(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ break;
+
+ case PM_SUSPEND_DISK:
+ return -ENOTSUPP;
+ break;
+
+ default:
+ return -EINVAL;
+ break;
+ }
+ return 0;
+}
+
+/*
+ * Called after devices are re-setup, but before processes are thawed.
+ */
+static int pnx4008_pm_finish(suspend_state_t state)
+{
+ return 0;
+}
+
+/*
+ * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
+ */
+static struct pm_ops pnx4008_pm_ops = {
+ .prepare = pnx4008_pm_prepare,
+ .enter = pnx4008_pm_enter,
+ .finish = pnx4008_pm_finish,
+};
+
+static int __init pnx4008_pm_init(void)
+{
+ u32 sram_size_to_allocate;
+
+ pll4_clk = clk_get(0, "ck_pll4");
+ if (IS_ERR(pll4_clk)) {
+ printk(KERN_ERR
+ "PM Suspend cannot acquire ARM(PLL4) clock control\n");
+ return PTR_ERR(pll4_clk);
+ }
+
+ if (pnx4008_cpu_standby_sz > pnx4008_cpu_suspend_sz)
+ sram_size_to_allocate = pnx4008_cpu_standby_sz;
+ else
+ sram_size_to_allocate = pnx4008_cpu_suspend_sz;
+
+ saved_sram = kmalloc(sram_size_to_allocate, GFP_ATOMIC);
+ if (!saved_sram) {
+ printk(KERN_ERR
+ "PM Suspend: cannot allocate memory to save portion of SRAM\n");
+ clk_put(pll4_clk);
+ return -ENOMEM;
+ }
+
+ pm_set_ops(&pnx4008_pm_ops);
+ return 0;
+}
+
+late_initcall(pnx4008_pm_init);
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
new file mode 100644
index 000000000000..2e1e04cc048c
--- /dev/null
+++ b/arch/arm/mach-pnx4008/serial.c
@@ -0,0 +1,69 @@
+/*
+ * linux/arch/arm/mach-pnx4008/serial.c
+ *
+ * PNX4008 UART initialization
+ *
+ * Copyright: MontaVista Software Inc. (c) 2005
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/platform.h>
+#include <asm/arch/hardware.h>
+
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <asm/arch/pm.h>
+
+#include <asm/arch/clock.h>
+
+#define UART_3 0
+#define UART_4 1
+#define UART_5 2
+#define UART_6 3
+#define UART_UNKNOWN (-1)
+
+#define UART3_BASE_VA IO_ADDRESS(PNX4008_UART3_BASE)
+#define UART4_BASE_VA IO_ADDRESS(PNX4008_UART4_BASE)
+#define UART5_BASE_VA IO_ADDRESS(PNX4008_UART5_BASE)
+#define UART6_BASE_VA IO_ADDRESS(PNX4008_UART6_BASE)
+
+#define UART_FCR_OFFSET 8
+#define UART_FIFO_SIZE 64
+
+void pnx4008_uart_init(void)
+{
+ u32 tmp;
+ int i = UART_FIFO_SIZE;
+
+ __raw_writel(0xC1, UART5_BASE_VA + UART_FCR_OFFSET);
+ __raw_writel(0xC1, UART3_BASE_VA + UART_FCR_OFFSET);
+
+ /* Send a NULL to fix the UART HW bug */
+ __raw_writel(0x00, UART5_BASE_VA);
+ __raw_writel(0x00, UART3_BASE_VA);
+
+ while (i--) {
+ tmp = __raw_readl(UART5_BASE_VA);
+ tmp = __raw_readl(UART3_BASE_VA);
+ }
+ __raw_writel(0, UART5_BASE_VA + UART_FCR_OFFSET);
+ __raw_writel(0, UART3_BASE_VA + UART_FCR_OFFSET);
+
+ /* setup wakeup interrupt */
+ start_int_set_rising_edge(SE_U3_RX_INT);
+ start_int_ack(SE_U3_RX_INT);
+ start_int_umask(SE_U3_RX_INT);
+
+ start_int_set_rising_edge(SE_U5_RX_INT);
+ start_int_ack(SE_U5_RX_INT);
+ start_int_umask(SE_U5_RX_INT);
+}
+
diff --git a/arch/arm/mach-pnx4008/sleep.S b/arch/arm/mach-pnx4008/sleep.S
new file mode 100644
index 000000000000..93c802bac269
--- /dev/null
+++ b/arch/arm/mach-pnx4008/sleep.S
@@ -0,0 +1,196 @@
+/*
+ * linux/arch/arm/mach-pnx4008/sleep.S
+ *
+ * PNX4008 support for STOP mode and SDRAM self-refresh
+ *
+ * Authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hardware.h>
+
+#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
+#define PWR_CTRL_REG_OFFS 0x44
+
+#define SDRAM_CFG_VA_BASE IO_ADDRESS(PNX4008_SDRAM_CFG_BASE)
+#define MPMC_STATUS_REG_OFFS 0x4
+
+ .text
+
+ENTRY(pnx4008_cpu_suspend)
+ @this function should be entered in Direct run mode.
+
+ @ save registers on stack
+ stmfd sp!, {r0 - r6, lr}
+
+ @ setup Power Manager base address in r4
+ @ and put it's value in r5
+ mov r4, #(PWRMAN_VA_BASE & 0xff000000)
+ orr r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000)
+ orr r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00)
+ orr r4, r4, #(PWRMAN_VA_BASE & 0x000000ff)
+ ldr r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ setup SDRAM controller base address in r2
+ @ and put it's value in r3
+ mov r2, #(SDRAM_CFG_VA_BASE & 0xff000000)
+ orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000)
+ orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00)
+ orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff)
+ ldr r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround
+
+ @ clear SDRAM self-refresh bit latch
+ and r5, r5, #(~(1 << 8))
+ @ clear SDRAM self-refresh bit
+ and r5, r5, #(~(1 << 9))
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ do save current bit settings in r1
+ mov r1, r5
+
+ @ set SDRAM self-refresh bit
+ orr r5, r5, #(1 << 9)
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ set SDRAM self-refresh bit latch
+ orr r5, r5, #(1 << 8)
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ clear SDRAM self-refresh bit latch
+ and r5, r5, #(~(1 << 8))
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ clear SDRAM self-refresh bit
+ and r5, r5, #(~(1 << 9))
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ wait for SDRAM to get into self-refresh mode
+2: ldr r3, [r2, #MPMC_STATUS_REG_OFFS]
+ tst r3, #(1 << 2)
+ beq 2b
+
+ @ to prepare SDRAM to get out of self-refresh mode after wakeup
+ orr r5, r5, #(1 << 7)
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ do enter stop mode
+ orr r5, r5, #(1 << 0)
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ @ sleeping now...
+
+ @ coming out of STOP mode into Direct Run mode
+ @ clear STOP mode and SDRAM self-refresh bits
+ str r1, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ wait for SDRAM to get out self-refresh mode
+3: ldr r3, [r2, #MPMC_STATUS_REG_OFFS]
+ tst r3, #5
+ bne 3b
+
+ @ restore regs and return
+ ldmfd sp!, {r0 - r6, pc}
+
+ENTRY(pnx4008_cpu_suspend_sz)
+ .word . - pnx4008_cpu_suspend
+
+ENTRY(pnx4008_cpu_standby)
+ @ save registers on stack
+ stmfd sp!, {r0 - r6, lr}
+
+ @ setup Power Manager base address in r4
+ @ and put it's value in r5
+ mov r4, #(PWRMAN_VA_BASE & 0xff000000)
+ orr r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000)
+ orr r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00)
+ orr r4, r4, #(PWRMAN_VA_BASE & 0x000000ff)
+ ldr r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ setup SDRAM controller base address in r2
+ @ and put it's value in r3
+ mov r2, #(SDRAM_CFG_VA_BASE & 0xff000000)
+ orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000)
+ orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00)
+ orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff)
+ ldr r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround
+
+ @ clear SDRAM self-refresh bit latch
+ and r5, r5, #(~(1 << 8))
+ @ clear SDRAM self-refresh bit
+ and r5, r5, #(~(1 << 9))
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ do save current bit settings in r1
+ mov r1, r5
+
+ @ set SDRAM self-refresh bit
+ orr r5, r5, #(1 << 9)
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ set SDRAM self-refresh bit latch
+ orr r5, r5, #(1 << 8)
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ clear SDRAM self-refresh bit latch
+ and r5, r5, #(~(1 << 8))
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ clear SDRAM self-refresh bit
+ and r5, r5, #(~(1 << 9))
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ wait for SDRAM to get into self-refresh mode
+2: ldr r3, [r2, #MPMC_STATUS_REG_OFFS]
+ tst r3, #(1 << 2)
+ beq 2b
+
+ @ set 'get out of self-refresh mode after wakeup' bit
+ orr r5, r5, #(1 << 7)
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ mcr p15, 0, r0, c7, c0, 4 @ kinda sleeping now...
+
+ @ set SDRAM self-refresh bit latch
+ orr r5, r5, #(1 << 8)
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ clear SDRAM self-refresh bit latch
+ and r5, r5, #(~(1 << 8))
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ wait for SDRAM to get out self-refresh mode
+3: ldr r3, [r2, #MPMC_STATUS_REG_OFFS]
+ tst r3, #5
+ bne 3b
+
+ @ restore regs and return
+ ldmfd sp!, {r0 - r6, pc}
+
+ENTRY(pnx4008_cpu_standby_sz)
+ .word . - pnx4008_cpu_standby
+
+ENTRY(pnx4008_cache_clean_invalidate)
+ stmfd sp!, {r0 - r6, lr}
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
+#else
+1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate
+ bne 1b
+#endif
+ ldmfd sp!, {r0 - r6, pc}
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
new file mode 100644
index 000000000000..4ce680698529
--- /dev/null
+++ b/arch/arm/mach-pnx4008/time.c
@@ -0,0 +1,141 @@
+/*
+ * arch/arm/mach-pnx4008/time.c
+ *
+ * PNX4008 Timers
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev, Grigory Tolstolytkin <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+
+#include <asm/system.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/leds.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <asm/errno.h>
+
+/*! Note: all timers are UPCOUNTING */
+
+/*!
+ * Returns number of us since last clock interrupt. Note that interrupts
+ * will have been disabled by do_gettimeoffset()
+ */
+static unsigned long pnx4008_gettimeoffset(void)
+{
+ u32 ticks_to_match =
+ __raw_readl(HSTIM_MATCH0) - __raw_readl(HSTIM_COUNTER);
+ u32 elapsed = LATCH - ticks_to_match;
+ return (elapsed * (tick_nsec / 1000)) / LATCH;
+}
+
+/*!
+ * IRQ handler for the timer
+ */
+static irqreturn_t pnx4008_timer_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ if (__raw_readl(HSTIM_INT) & MATCH0_INT) {
+
+ write_seqlock(&xtime_lock);
+
+ do {
+ timer_tick(regs);
+
+ /*
+ * this algorithm takes care of possible delay
+ * for this interrupt handling longer than a normal
+ * timer period
+ */
+ __raw_writel(__raw_readl(HSTIM_MATCH0) + LATCH,
+ HSTIM_MATCH0);
+ __raw_writel(MATCH0_INT, HSTIM_INT); /* clear interrupt */
+
+ /*
+ * The goal is to keep incrementing HSTIM_MATCH0
+ * register until HSTIM_MATCH0 indicates time after
+ * what HSTIM_COUNTER indicates.
+ */
+ } while ((signed)
+ (__raw_readl(HSTIM_MATCH0) -
+ __raw_readl(HSTIM_COUNTER)) < 0);
+
+ write_sequnlock(&xtime_lock);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction pnx4008_timer_irq = {
+ .name = "PNX4008 Tick Timer",
+ .flags = SA_INTERRUPT | SA_TIMER,
+ .handler = pnx4008_timer_interrupt
+};
+
+/*!
+ * Set up timer and timer interrupt.
+ */
+static __init void pnx4008_setup_timer(void)
+{
+ __raw_writel(RESET_COUNT, MSTIM_CTRL);
+ while (__raw_readl(MSTIM_COUNTER)) ; /* wait for reset to complete. 100% guarantee event */
+ __raw_writel(0, MSTIM_CTRL); /* stop the timer */
+ __raw_writel(0, MSTIM_MCTRL);
+
+ __raw_writel(RESET_COUNT, HSTIM_CTRL);
+ while (__raw_readl(HSTIM_COUNTER)) ; /* wait for reset to complete. 100% guarantee event */
+ __raw_writel(0, HSTIM_CTRL);
+ __raw_writel(0, HSTIM_MCTRL);
+ __raw_writel(0, HSTIM_CCR);
+ __raw_writel(12, HSTIM_PMATCH); /* scale down to 1 MHZ */
+ __raw_writel(LATCH, HSTIM_MATCH0);
+ __raw_writel(MR0_INT, HSTIM_MCTRL);
+
+ setup_irq(HSTIMER_INT, &pnx4008_timer_irq);
+
+ __raw_writel(COUNT_ENAB | DEBUG_EN, HSTIM_CTRL); /*start timer, stop when JTAG active */
+}
+
+/* Timer Clock Control in PM register */
+#define TIMCLK_CTRL_REG IO_ADDRESS((PNX4008_PWRMAN_BASE + 0xBC))
+#define WATCHDOG_CLK_EN 1
+#define TIMER_CLK_EN 2 /* HS and MS timers? */
+
+static u32 timclk_ctrl_reg_save;
+
+void pnx4008_timer_suspend(void)
+{
+ timclk_ctrl_reg_save = __raw_readl(TIMCLK_CTRL_REG);
+ __raw_writel(0, TIMCLK_CTRL_REG); /* disable timers */
+}
+
+void pnx4008_timer_resume(void)
+{
+ __raw_writel(timclk_ctrl_reg_save, TIMCLK_CTRL_REG); /* enable timers */
+}
+
+struct sys_timer pnx4008_timer = {
+ .init = pnx4008_setup_timer,
+ .offset = pnx4008_gettimeoffset,
+ .suspend = pnx4008_timer_suspend,
+ .resume = pnx4008_timer_resume,
+};
+
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 3e26d7ce5bb2..1ab26c6914f2 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -22,6 +22,10 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <asm/arch/pxa2xx_spi.h>
+
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
@@ -196,6 +200,78 @@ static struct resource smc91x_resources[] = {
},
};
+/* ADS7846 is connected through SSP ... and if your board has J5 populated,
+ * you can select it to replace the ucb1400 by switching the touchscreen cable
+ * (to J5) and poking board registers (as done below). Else it's only useful
+ * for the temperature sensors.
+ */
+static struct resource pxa_ssp_resources[] = {
+ [0] = {
+ .start = __PREG(SSCR0_P(1)),
+ .end = __PREG(SSCR0_P(1)) + 0x14,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP,
+ .end = IRQ_SSP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+ .ssp_type = PXA25x_SSP,
+ .clock_enable = CKEN3_SSP,
+ .num_chipselect = 0,
+};
+
+static struct platform_device pxa_ssp = {
+ .name = "pxa2xx-spi",
+ .id = 1,
+ .resource = pxa_ssp_resources,
+ .num_resources = ARRAY_SIZE(pxa_ssp_resources),
+ .dev = {
+ .platform_data = &pxa_ssp_master_info,
+ },
+};
+
+static int lubbock_ads7846_pendown_state(void)
+{
+ /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
+ return 0;
+}
+
+static struct ads7846_platform_data ads_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100, /* internal, no cap */
+ .get_pendown_state = lubbock_ads7846_pendown_state,
+ // .x_plate_ohms = 500, /* GUESS! */
+ // .y_plate_ohms = 500, /* GUESS! */
+};
+
+static void ads7846_cs(u32 command)
+{
+ static const unsigned TS_nCS = 1 << 11;
+ lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
+}
+
+static struct pxa2xx_spi_chip ads_hw = {
+ .tx_threshold = 1,
+ .rx_threshold = 2,
+ .cs_control = ads7846_cs,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = { {
+ .modalias = "ads7846",
+ .platform_data = &ads_info,
+ .controller_data = &ads_hw,
+ .irq = LUBBOCK_BB_IRQ,
+ .max_speed_hz = 120000 /* max sample rate at 3V */
+ * 26 /* command + data + overhead */,
+ .bus_num = 1,
+ .chip_select = 0,
+},
+};
+
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = -1,
@@ -272,6 +348,7 @@ static struct platform_device *devices[] __initdata = {
&smc91x_device,
&lubbock_flash_device[0],
&lubbock_flash_device[1],
+ &pxa_ssp,
};
static struct pxafb_mach_info sharp_lm8v31 __initdata = {
@@ -400,6 +477,8 @@ static void __init lubbock_init(void)
lubbock_flash_data[flashboot^1].name = "application-flash";
lubbock_flash_data[flashboot].name = "boot-rom";
(void) platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
}
static struct map_desc lubbock_io_desc[] __initdata = {
@@ -416,6 +495,11 @@ static void __init lubbock_map_io(void)
pxa_map_io();
iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
+ /* SSP data pins */
+ pxa_gpio_mode(GPIO23_SCLK_MD);
+ pxa_gpio_mode(GPIO25_STXD_MD);
+ pxa_gpio_mode(GPIO26_SRXD_MD);
+
/* This enables the BTUART */
pxa_gpio_mode(GPIO42_BTRXD_MD);
pxa_gpio_mode(GPIO43_BTTXD_MD);
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 970f98dadffc..0c334136db7c 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -70,6 +70,18 @@ config ARCH_S3C2440
help
Say Y here if you are using the SMDK2440.
+config SMDK2440_CPU2440
+ bool "SMDK2440 with S3C2440 cpu module"
+ depends on ARCH_S3C2440
+ default y if ARCH_S3C2440
+ select CPU_S3C2440
+
+config SMDK2440_CPU2442
+ bool "SMDM2440 with S3C2442 cpu module"
+ depends on ARCH_S3C2440
+ select CPU_S3C2442
+
+
config MACH_VR1000
bool "Thorcom VR1000"
select CPU_S3C2410
@@ -109,12 +121,26 @@ config CPU_S3C2410
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
+config CPU_S3C244X
+ bool
+ depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
+ help
+ Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+
config CPU_S3C2440
bool
depends on ARCH_S3C2410
+ select CPU_S3C244X
help
Support for S3C2440 Samsung Mobile CPU based systems.
+config CPU_S3C2442
+ bool
+ depends on ARCH_S3C2420
+ select CPU_S3C244X
+ help
+ Support for S3C2442 Samsung Mobile CPU based systems.
+
comment "S3C2410 Boot"
config S3C2410_BOOT_WATCHDOG
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 3e5712db6b52..5e09355cd4f4 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -24,6 +24,11 @@ obj-$(CONFIG_S3C2410_DMA) += dma.o
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
+# S3C244X support
+
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
+
# S3C2440 support
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o
@@ -31,6 +36,11 @@ obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o
obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o
+# S3C2442 support
+
+obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
+obj-$(CONFIG_CPU_S3C2442) += s3c2442-clock.o
+
# bast extras
obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index 6de713ad319a..99d174612b53 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -70,7 +70,7 @@ void inline s3c24xx_clk_enable(unsigned int clocks, unsigned int enable)
clkcon &= ~clocks;
/* ensure none of the special function bits set */
- clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
+ clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER | 3);
__raw_writel(clkcon, S3C2410_CLKCON);
}
diff --git a/arch/arm/mach-s3c2410/common-smdk.c b/arch/arm/mach-s3c2410/common-smdk.c
index c940890f621f..a40eaa656177 100644
--- a/arch/arm/mach-s3c2410/common-smdk.c
+++ b/arch/arm/mach-s3c2410/common-smdk.c
@@ -34,6 +34,7 @@
#include <asm/irq.h>
#include <asm/arch/regs-gpio.h>
+#include <asm/arch/leds-gpio.h>
#include <asm/arch/nand.h>
@@ -41,6 +42,66 @@
#include "devs.h"
#include "pm.h"
+/* LED devices */
+
+static struct s3c24xx_led_platdata smdk_pdata_led4 = {
+ .gpio = S3C2410_GPF4,
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .name = "led4",
+ .def_trigger = "timer",
+};
+
+static struct s3c24xx_led_platdata smdk_pdata_led5 = {
+ .gpio = S3C2410_GPF5,
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .name = "led5",
+ .def_trigger = "nand-disk",
+};
+
+static struct s3c24xx_led_platdata smdk_pdata_led6 = {
+ .gpio = S3C2410_GPF6,
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .name = "led6",
+};
+
+static struct s3c24xx_led_platdata smdk_pdata_led7 = {
+ .gpio = S3C2410_GPF7,
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .name = "led7",
+};
+
+static struct platform_device smdk_led4 = {
+ .name = "s3c24xx_led",
+ .id = 0,
+ .dev = {
+ .platform_data = &smdk_pdata_led4,
+ },
+};
+
+static struct platform_device smdk_led5 = {
+ .name = "s3c24xx_led",
+ .id = 1,
+ .dev = {
+ .platform_data = &smdk_pdata_led5,
+ },
+};
+
+static struct platform_device smdk_led6 = {
+ .name = "s3c24xx_led",
+ .id = 2,
+ .dev = {
+ .platform_data = &smdk_pdata_led6,
+ },
+};
+
+static struct platform_device smdk_led7 = {
+ .name = "s3c24xx_led",
+ .id = 3,
+ .dev = {
+ .platform_data = &smdk_pdata_led7,
+ },
+};
+
/* NAND parititon from 2.4.18-swl5 */
static struct mtd_partition smdk_default_nand_part[] = {
@@ -111,6 +172,10 @@ static struct s3c2410_platform_nand smdk_nand_info = {
static struct platform_device __initdata *smdk_devs[] = {
&s3c_device_nand,
+ &smdk_led4,
+ &smdk_led5,
+ &smdk_led6,
+ &smdk_led7,
};
void __init smdk_machine_init(void)
diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/mach-s3c2410/cpu.c
index 70c34fcf7858..52842e6e86e6 100644
--- a/arch/arm/mach-s3c2410/cpu.c
+++ b/arch/arm/mach-s3c2410/cpu.c
@@ -37,12 +37,16 @@
#include <asm/mach/map.h>
#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-serial.h>
#include "cpu.h"
+#include "devs.h"
#include "clock.h"
#include "s3c2400.h"
#include "s3c2410.h"
+#include "s3c244x.h"
#include "s3c2440.h"
+#include "s3c2442.h"
struct cpu_table {
unsigned long idcode;
@@ -59,6 +63,7 @@ struct cpu_table {
static const char name_s3c2400[] = "S3C2400";
static const char name_s3c2410[] = "S3C2410";
static const char name_s3c2440[] = "S3C2440";
+static const char name_s3c2442[] = "S3C2442";
static const char name_s3c2410a[] = "S3C2410A";
static const char name_s3c2440a[] = "S3C2440A";
@@ -84,22 +89,31 @@ static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = 0x32440000,
.idmask = 0xffffffff,
- .map_io = s3c2440_map_io,
- .init_clocks = s3c2440_init_clocks,
- .init_uarts = s3c2440_init_uarts,
+ .map_io = s3c244x_map_io,
+ .init_clocks = s3c244x_init_clocks,
+ .init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
.name = name_s3c2440
},
{
.idcode = 0x32440001,
.idmask = 0xffffffff,
- .map_io = s3c2440_map_io,
- .init_clocks = s3c2440_init_clocks,
- .init_uarts = s3c2440_init_uarts,
+ .map_io = s3c244x_map_io,
+ .init_clocks = s3c244x_init_clocks,
+ .init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
.name = name_s3c2440a
},
{
+ .idcode = 0x32440aaa,
+ .idmask = 0xffffffff,
+ .map_io = s3c244x_map_io,
+ .init_clocks = s3c244x_init_clocks,
+ .init_uarts = s3c244x_init_uarts,
+ .init = s3c2442_init,
+ .name = name_s3c2442
+ },
+ {
.idcode = 0x0, /* S3C2400 doesn't have an idcode */
.idmask = 0xffffffff,
.map_io = s3c2400_map_io,
@@ -175,13 +189,13 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
panic("Unknown S3C24XX CPU");
}
+ printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
+
if (cpu->map_io == NULL || cpu->init == NULL) {
printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
panic("Unsupported S3C24XX CPU");
}
- printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
-
(cpu->map_io)(mach_desc, size);
}
@@ -208,6 +222,49 @@ void __init s3c24xx_init_clocks(int xtal)
(cpu->init_clocks)(xtal);
}
+/* uart management */
+
+static int nr_uarts __initdata = 0;
+
+static struct s3c2410_uartcfg uart_cfgs[3];
+
+/* s3c24xx_init_uartdevs
+ *
+ * copy the specified platform data and configuration into our central
+ * set of devices, before the data is thrown away after the init process.
+ *
+ * This also fills in the array passed to the serial driver for the
+ * early initialisation of the console.
+*/
+
+void __init s3c24xx_init_uartdevs(char *name,
+ struct s3c24xx_uart_resources *res,
+ struct s3c2410_uartcfg *cfg, int no)
+{
+ struct platform_device *platdev;
+ struct s3c2410_uartcfg *cfgptr = uart_cfgs;
+ struct s3c24xx_uart_resources *resp;
+ int uart;
+
+ memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
+
+ for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
+ platdev = s3c24xx_uart_src[cfgptr->hwport];
+
+ resp = res + cfgptr->hwport;
+
+ s3c24xx_uart_devs[uart] = platdev;
+
+ platdev->name = name;
+ platdev->resource = resp->resources;
+ platdev->num_resources = resp->nr_resources;
+
+ platdev->dev.platform_data = cfgptr;
+ }
+
+ nr_uarts = no;
+}
+
void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
if (cpu == NULL)
@@ -232,6 +289,10 @@ static int __init s3c_arch_init(void)
if (ret != 0)
return ret;
+ ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
+ if (ret != 0)
+ return ret;
+
if (board != NULL) {
struct platform_device **ptr = board->devices;
int i;
diff --git a/arch/arm/mach-s3c2410/cpu.h b/arch/arm/mach-s3c2410/cpu.h
index fc1067783f6d..40862899b2f1 100644
--- a/arch/arm/mach-s3c2410/cpu.h
+++ b/arch/arm/mach-s3c2410/cpu.h
@@ -31,6 +31,8 @@
#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000)
/* forward declaration */
+struct s3c24xx_uart_resources;
+struct platform_device;
struct s3c2410_uartcfg;
struct map_desc;
@@ -44,6 +46,10 @@ extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void s3c24xx_init_clocks(int xtal);
+extern void s3c24xx_init_uartdevs(char *name,
+ struct s3c24xx_uart_resources *res,
+ struct s3c2410_uartcfg *cfg, int no);
+
/* the board structure is used at first initialsation time
* to get info such as the devices to register for this
* board. This is done because platfrom_add_devices() cannot
@@ -68,3 +74,4 @@ extern struct sys_timer s3c24xx_timer;
/* system device classes */
extern struct sysdev_class s3c2440_sysclass;
+extern struct sysdev_class s3c2442_sysclass;
diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c
index ca09ba516e4c..ad3845e329ba 100644
--- a/arch/arm/mach-s3c2410/devs.c
+++ b/arch/arm/mach-s3c2410/devs.c
@@ -38,10 +38,86 @@
#include <asm/arch/regs-serial.h>
#include "devs.h"
+#include "cpu.h"
/* Serial port registrations */
-struct platform_device *s3c24xx_uart_devs[3];
+static struct resource s3c2410_uart0_resource[] = {
+ [0] = {
+ .start = S3C2410_PA_UART0,
+ .end = S3C2410_PA_UART0 + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX0,
+ .end = IRQ_S3CUART_ERR0,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource s3c2410_uart1_resource[] = {
+ [0] = {
+ .start = S3C2410_PA_UART1,
+ .end = S3C2410_PA_UART1 + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX1,
+ .end = IRQ_S3CUART_ERR1,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource s3c2410_uart2_resource[] = {
+ [0] = {
+ .start = S3C2410_PA_UART2,
+ .end = S3C2410_PA_UART2 + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX2,
+ .end = IRQ_S3CUART_ERR2,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
+ [0] = {
+ .resources = s3c2410_uart0_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart0_resource),
+ },
+ [1] = {
+ .resources = s3c2410_uart1_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart1_resource),
+ },
+ [2] = {
+ .resources = s3c2410_uart2_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart2_resource),
+ },
+};
+
+/* yart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+ .id = 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+ .id = 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+ .id = 2,
+};
+
+struct platform_device *s3c24xx_uart_src[3] = {
+ &s3c24xx_uart_device0,
+ &s3c24xx_uart_device1,
+ &s3c24xx_uart_device2,
+};
+
+struct platform_device *s3c24xx_uart_devs[3] = {
+};
/* USB Host Controller */
diff --git a/arch/arm/mach-s3c2410/devs.h b/arch/arm/mach-s3c2410/devs.h
index 52c4bab5c761..fa124ed920e0 100644
--- a/arch/arm/mach-s3c2410/devs.h
+++ b/arch/arm/mach-s3c2410/devs.h
@@ -17,7 +17,15 @@
#include <linux/config.h>
#include <linux/platform_device.h>
+struct s3c24xx_uart_resources {
+ struct resource *resources;
+ unsigned long nr_resources;
+};
+
+extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
+
extern struct platform_device *s3c24xx_uart_devs[];
+extern struct platform_device *s3c24xx_uart_src[];
extern struct platform_device s3c_device_usb;
extern struct platform_device s3c_device_lcd;
diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c
index cc97fbf66291..52bf718137d4 100644
--- a/arch/arm/mach-s3c2410/mach-anubis.c
+++ b/arch/arm/mach-s3c2410/mach-anubis.c
@@ -131,7 +131,7 @@ static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = {
};
-static struct s3c2410_uartcfg anubis_uartcfgs[] = {
+static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 995bb8add331..947234df8160 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -208,7 +208,7 @@ static struct s3c24xx_uart_clksrc bast_serial_clocks[] = {
};
-static struct s3c2410_uartcfg bast_uartcfgs[] = {
+static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 646a3a5d33a5..aec431b2830a 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -72,7 +72,7 @@ static struct map_desc h1940_iodesc[] __initdata = {
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-static struct s3c2410_uartcfg h1940_uartcfgs[] = {
+static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
diff --git a/arch/arm/mach-s3c2410/mach-nexcoder.c b/arch/arm/mach-s3c2410/mach-nexcoder.c
index 07d09509a626..065a1d4e860b 100644
--- a/arch/arm/mach-s3c2410/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2410/mach-nexcoder.c
@@ -51,7 +51,7 @@ static struct map_desc nexcoder_iodesc[] __initdata = {
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
-static struct s3c2410_uartcfg nexcoder_uartcfgs[] = {
+static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
diff --git a/arch/arm/mach-s3c2410/mach-osiris.c b/arch/arm/mach-s3c2410/mach-osiris.c
index ae0787557751..858fd03c6bc5 100644
--- a/arch/arm/mach-s3c2410/mach-osiris.c
+++ b/arch/arm/mach-s3c2410/mach-osiris.c
@@ -95,8 +95,7 @@ static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = {
}
};
-
-static struct s3c2410_uartcfg osiris_uartcfgs[] = {
+static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
@@ -107,7 +106,7 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] = {
.clocks_size = ARRAY_SIZE(osiris_serial_clocks)
},
[1] = {
- .hwport = 2,
+ .hwport = 1,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index b39daedf93ca..c71673fd9955 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -45,7 +45,7 @@ static struct map_desc otom11_iodesc[] __initdata = {
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
-static struct s3c2410_uartcfg otom11_uartcfgs[] = {
+static struct s3c2410_uartcfg otom11_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 2db932d72c5a..25f7e9f4dcee 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -65,7 +65,7 @@ static struct map_desc smdk2410_iodesc[] __initdata = {
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-static struct s3c2410_uartcfg smdk2410_uartcfgs[] = {
+static struct s3c2410_uartcfg smdk2410_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c
index 5fffd1d51047..d661c6b7ff56 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2440.c
@@ -86,7 +86,7 @@ static struct map_desc smdk2440_iodesc[] __initdata = {
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-static struct s3c2410_uartcfg smdk2440_uartcfgs[] = {
+static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 785fc9cdcf7c..d18efb279d3d 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -166,7 +166,7 @@ static struct s3c24xx_uart_clksrc vr1000_serial_clocks[] = {
}
};
-static struct s3c2410_uartcfg vr1000_uartcfgs[] = {
+static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index fe57d966a34d..43e9a550a203 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -58,7 +58,11 @@ unsigned long s3c_pm_flags;
/* cache functions from arch/arm/mm/proc-arm920.S */
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
extern void arm920_flush_kern_cache_all(void);
+#else
+static void arm920_flush_kern_cache_all(void) { }
+#endif
#define PFX "s3c24xx-pm: "
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 0a2013a76549..0852e87a79c4 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -42,6 +42,7 @@
#include "s3c2410.h"
#include "cpu.h"
+#include "devs.h"
#include "clock.h"
/* Initial IO mappings */
@@ -55,93 +56,13 @@ static struct map_desc s3c2410_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
};
-static struct resource s3c_uart0_resource[] = {
- [0] = {
- .start = S3C2410_PA_UART0,
- .end = S3C2410_PA_UART0 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX0,
- .end = IRQ_S3CUART_ERR0,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-static struct resource s3c_uart1_resource[] = {
- [0] = {
- .start = S3C2410_PA_UART1,
- .end = S3C2410_PA_UART1 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX1,
- .end = IRQ_S3CUART_ERR1,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource s3c_uart2_resource[] = {
- [0] = {
- .start = S3C2410_PA_UART2,
- .end = S3C2410_PA_UART2 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX2,
- .end = IRQ_S3CUART_ERR2,
- .flags = IORESOURCE_IRQ,
- }
-};
-
/* our uart devices */
-static struct platform_device s3c_uart0 = {
- .name = "s3c2410-uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c_uart0_resource),
- .resource = s3c_uart0_resource,
-};
-
-
-static struct platform_device s3c_uart1 = {
- .name = "s3c2410-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c_uart1_resource),
- .resource = s3c_uart1_resource,
-};
-
-static struct platform_device s3c_uart2 = {
- .name = "s3c2410-uart",
- .id = 2,
- .num_resources = ARRAY_SIZE(s3c_uart2_resource),
- .resource = s3c_uart2_resource,
-};
-
-static struct platform_device *uart_devices[] __initdata = {
- &s3c_uart0,
- &s3c_uart1,
- &s3c_uart2
-};
-
-static int s3c2410_uart_count = 0;
-
/* uart registration process */
void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
- struct platform_device *platdev;
- int uart;
-
- for (uart = 0; uart < no; uart++, cfg++) {
- platdev = uart_devices[cfg->hwport];
-
- s3c24xx_uart_devs[uart] = platdev;
- platdev->dev.platform_data = cfg;
- }
-
- s3c2410_uart_count = uart;
+ s3c24xx_init_uartdevs("s3c2410-uart", s3c2410_uart_resources, cfg, no);
}
/* s3c2410_map_io
@@ -193,5 +114,5 @@ int __init s3c2410_init(void)
{
printk("S3C2410: Initialising architecture\n");
- return platform_add_devices(s3c24xx_uart_devs, s3c2410_uart_count);
+ return 0;
}
diff --git a/arch/arm/mach-s3c2410/s3c2440-irq.c b/arch/arm/mach-s3c2410/s3c2440-irq.c
index 278d0044c85d..acfe3870727b 100644
--- a/arch/arm/mach-s3c2410/s3c2440-irq.c
+++ b/arch/arm/mach-s3c2410/s3c2440-irq.c
@@ -100,73 +100,12 @@ static struct irqchip s3c_irq_wdtac97 = {
.ack = s3c_irq_wdtac97_ack,
};
-/* camera irq */
-
-static void s3c_irq_demux_cam(unsigned int irq,
- struct irqdesc *desc,
- struct pt_regs *regs)
-{
- unsigned int subsrc, submsk;
- struct irqdesc *mydesc;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 11;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- mydesc = irq_desc + IRQ_S3C2440_CAM_C;
- desc_handle_irq(IRQ_S3C2440_CAM_C, mydesc, regs);
- }
- if (subsrc & 2) {
- mydesc = irq_desc + IRQ_S3C2440_CAM_P;
- desc_handle_irq(IRQ_S3C2440_CAM_P, mydesc, regs);
- }
- }
-}
-
-#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
-
-static void
-s3c_irq_cam_mask(unsigned int irqno)
-{
- s3c_irqsub_mask(irqno, INTMSK_CAM, 3<<11);
-}
-
-static void
-s3c_irq_cam_unmask(unsigned int irqno)
-{
- s3c_irqsub_unmask(irqno, INTMSK_CAM);
-}
-
-static void
-s3c_irq_cam_ack(unsigned int irqno)
-{
- s3c_irqsub_maskack(irqno, INTMSK_CAM, 3<<11);
-}
-
-static struct irqchip s3c_irq_cam = {
- .mask = s3c_irq_cam_mask,
- .unmask = s3c_irq_cam_unmask,
- .ack = s3c_irq_cam_ack,
-};
-
static int s3c2440_irq_add(struct sys_device *sysdev)
{
unsigned int irqno;
printk("S3C2440: IRQ Support\n");
- set_irq_chip(IRQ_NFCON, &s3c_irq_level_chip);
- set_irq_handler(IRQ_NFCON, do_level_IRQ);
- set_irq_flags(IRQ_NFCON, IRQF_VALID);
-
/* add new chained handler for wdt, ac7 */
set_irq_chip(IRQ_WDT, &s3c_irq_level_chip);
@@ -179,18 +118,6 @@ static int s3c2440_irq_add(struct sys_device *sysdev)
set_irq_flags(irqno, IRQF_VALID);
}
- /* add chained handler for camera */
-
- set_irq_chip(IRQ_CAM, &s3c_irq_level_chip);
- set_irq_handler(IRQ_CAM, do_level_IRQ);
- set_irq_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
-
- for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
- set_irq_chip(irqno, &s3c_irq_cam);
- set_irq_handler(irqno, do_level_IRQ);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
return 0;
}
@@ -198,10 +125,10 @@ static struct sysdev_driver s3c2440_irq_driver = {
.add = s3c2440_irq_add,
};
-static int s3c24xx_irq_driver(void)
+static int s3c2440_irq_init(void)
{
return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver);
}
-arch_initcall(s3c24xx_irq_driver);
+arch_initcall(s3c2440_irq_init);
diff --git a/arch/arm/mach-s3c2410/s3c2440.c b/arch/arm/mach-s3c2410/s3c2440.c
index b7fe6d9453fb..0ab50f44f318 100644
--- a/arch/arm/mach-s3c2410/s3c2440.c
+++ b/arch/arm/mach-s3c2410/s3c2440.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2410/s3c2440.c
*
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright (c) 2004-2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Samsung S3C2440 Mobile CPU support
@@ -8,16 +8,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Modifications:
- * 24-Aug-2004 BJD Start of s3c2440 support
- * 12-Oct-2004 BJD Moved clock info out to clock.c
- * 01-Nov-2004 BJD Fixed clock build code
- * 09-Nov-2004 BJD Added sysdev for power management
- * 04-Nov-2004 BJD New serial registration
- * 15-Nov-2004 BJD Rename the i2c device for the s3c2440
- * 14-Jan-2005 BJD Moved clock init code into seperate function
- * 14-Jan-2005 BJD Removed un-used clock bits
*/
#include <linux/kernel.h>
@@ -50,234 +40,20 @@
#include "cpu.h"
#include "pm.h"
-
-static struct map_desc s3c2440_iodesc[] __initdata = {
- IODESC_ENT(USBHOST),
- IODESC_ENT(CLKPWR),
- IODESC_ENT(LCD),
- IODESC_ENT(TIMER),
- IODESC_ENT(ADC),
- IODESC_ENT(WATCHDOG),
-};
-
-static struct resource s3c_uart0_resource[] = {
- [0] = {
- .start = S3C2410_PA_UART0,
- .end = S3C2410_PA_UART0 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX0,
- .end = IRQ_S3CUART_ERR0,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-static struct resource s3c_uart1_resource[] = {
- [0] = {
- .start = S3C2410_PA_UART1,
- .end = S3C2410_PA_UART1 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX1,
- .end = IRQ_S3CUART_ERR1,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource s3c_uart2_resource[] = {
- [0] = {
- .start = S3C2410_PA_UART2,
- .end = S3C2410_PA_UART2 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX2,
- .end = IRQ_S3CUART_ERR2,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-/* our uart devices */
-
-static struct platform_device s3c_uart0 = {
- .name = "s3c2440-uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c_uart0_resource),
- .resource = s3c_uart0_resource,
-};
-
-static struct platform_device s3c_uart1 = {
- .name = "s3c2440-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c_uart1_resource),
- .resource = s3c_uart1_resource,
-};
-
-static struct platform_device s3c_uart2 = {
- .name = "s3c2440-uart",
- .id = 2,
- .num_resources = ARRAY_SIZE(s3c_uart2_resource),
- .resource = s3c_uart2_resource,
-};
-
-static struct platform_device *uart_devices[] __initdata = {
- &s3c_uart0,
- &s3c_uart1,
- &s3c_uart2
-};
-
-/* uart initialisation */
-
-static int __initdata s3c2440_uart_count;
-
-void __init s3c2440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- struct platform_device *platdev;
- int uart;
-
- for (uart = 0; uart < no; uart++, cfg++) {
- platdev = uart_devices[cfg->hwport];
-
- s3c24xx_uart_devs[uart] = platdev;
- platdev->dev.platform_data = cfg;
- }
-
- s3c2440_uart_count = uart;
-}
-
-
-#ifdef CONFIG_PM
-
-static struct sleep_save s3c2440_sleep[] = {
- SAVE_ITEM(S3C2440_DSC0),
- SAVE_ITEM(S3C2440_DSC1),
- SAVE_ITEM(S3C2440_GPJDAT),
- SAVE_ITEM(S3C2440_GPJCON),
- SAVE_ITEM(S3C2440_GPJUP)
-};
-
-static int s3c2440_suspend(struct sys_device *dev, pm_message_t state)
-{
- s3c2410_pm_do_save(s3c2440_sleep, ARRAY_SIZE(s3c2440_sleep));
- return 0;
-}
-
-static int s3c2440_resume(struct sys_device *dev)
-{
- s3c2410_pm_do_restore(s3c2440_sleep, ARRAY_SIZE(s3c2440_sleep));
- return 0;
-}
-
-#else
-#define s3c2440_suspend NULL
-#define s3c2440_resume NULL
-#endif
-
-struct sysdev_class s3c2440_sysclass = {
- set_kset_name("s3c2440-core"),
- .suspend = s3c2440_suspend,
- .resume = s3c2440_resume
-};
-
static struct sys_device s3c2440_sysdev = {
.cls = &s3c2440_sysclass,
};
-void __init s3c2440_map_io(struct map_desc *mach_desc, int size)
+int __init s3c2440_init(void)
{
- /* register our io-tables */
-
- iotable_init(s3c2440_iodesc, ARRAY_SIZE(s3c2440_iodesc));
- iotable_init(mach_desc, size);
-
- /* rename any peripherals used differing from the s3c2410 */
-
- s3c_device_i2c.name = "s3c2440-i2c";
- s3c_device_nand.name = "s3c2440-nand";
+ printk("S3C2440: Initialising architecture\n");
/* change irq for watchdog */
s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT;
-}
-
-void __init s3c2440_init_clocks(int xtal)
-{
- unsigned long clkdiv;
- unsigned long camdiv;
- unsigned long hclk, fclk, pclk;
- int hdiv = 1;
-
- /* now we've got our machine bits initialised, work out what
- * clocks we've got */
-
- fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
-
- clkdiv = __raw_readl(S3C2410_CLKDIVN);
- camdiv = __raw_readl(S3C2440_CAMDIVN);
-
- /* work out clock scalings */
-
- switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
- case S3C2440_CLKDIVN_HDIVN_1:
- hdiv = 1;
- break;
-
- case S3C2440_CLKDIVN_HDIVN_2:
- hdiv = 2;
- break;
-
- case S3C2440_CLKDIVN_HDIVN_4_8:
- hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
- break;
-
- case S3C2440_CLKDIVN_HDIVN_3_6:
- hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
- break;
- }
-
- hclk = fclk / hdiv;
- pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN)? 2:1);
-
- /* print brief summary of clocks, etc */
-
- printk("S3C2440: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
- print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
- /* initialise the clocks here, to allow other things like the
- * console to use them, and to add new ones after the initialisation
- */
-
- s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
-}
-
-/* need to register class before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2440 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-static int __init s3c2440_core_init(void)
-{
- return sysdev_class_register(&s3c2440_sysclass);
-}
-
-core_initcall(s3c2440_core_init);
-
-int __init s3c2440_init(void)
-{
- int ret;
-
- printk("S3C2440: Initialising architecture\n");
- ret = sysdev_register(&s3c2440_sysdev);
- if (ret != 0)
- printk(KERN_ERR "failed to register sysdev for s3c2440\n");
- else
- ret = platform_add_devices(s3c24xx_uart_devs, s3c2440_uart_count);
+ /* register our system device for everything else */
- return ret;
+ return sysdev_register(&s3c2440_sysdev);
}
diff --git a/arch/arm/mach-s3c2410/s3c2442-clock.c b/arch/arm/mach-s3c2410/s3c2442-clock.c
new file mode 100644
index 000000000000..5b7b301eb522
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2442-clock.c
@@ -0,0 +1,171 @@
+/* linux/arch/arm/mach-s3c2410/s3c2442-clock.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2442 Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-clock.h>
+
+#include "clock.h"
+#include "cpu.h"
+
+/* S3C2442 extended clock support */
+
+static unsigned long s3c2442_camif_upll_round(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ int div;
+
+ if (rate > parent_rate)
+ return parent_rate;
+
+ div = parent_rate / rate;
+
+ if (div == 3)
+ return parent_rate / 3;
+
+ /* note, we remove the +/- 1 calculations for the divisor */
+
+ div /= 2;
+
+ if (div < 1)
+ div = 1;
+ else if (div > 16)
+ div = 16;
+
+ return parent_rate / (div * 2);
+}
+
+static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
+
+ rate = s3c2442_camif_upll_round(clk, rate);
+
+ camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
+
+ if (rate == parent_rate) {
+ camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
+ } else if ((parent_rate / rate) == 3) {
+ camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
+ camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
+ } else {
+ camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
+ camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
+ camdivn |= (((parent_rate / rate) / 2) - 1);
+ }
+
+ __raw_writel(camdivn, S3C2440_CAMDIVN);
+
+ return 0;
+}
+
+/* Extra S3C2442 clocks */
+
+static struct clk s3c2442_clk_cam = {
+ .name = "camif",
+ .id = -1,
+ .enable = s3c24xx_clkcon_enable,
+ .ctrlbit = S3C2440_CLKCON_CAMERA,
+};
+
+static struct clk s3c2442_clk_cam_upll = {
+ .name = "camif-upll",
+ .id = -1,
+ .set_rate = s3c2442_camif_upll_setrate,
+ .round_rate = s3c2442_camif_upll_round,
+};
+
+static int s3c2442_clk_add(struct sys_device *sysdev)
+{
+ unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
+ unsigned long clkdivn;
+ struct clk *clk_h;
+ struct clk *clk_p;
+ struct clk *clk_upll;
+
+ printk("S3C2442: Clock Support, DVS %s\n",
+ (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
+
+ clk_p = clk_get(NULL, "pclk");
+ clk_h = clk_get(NULL, "hclk");
+ clk_upll = clk_get(NULL, "upll");
+
+ if (IS_ERR(clk_p) || IS_ERR(clk_h) || IS_ERR(clk_upll)) {
+ printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
+ return -EINVAL;
+ }
+
+ /* check rate of UPLL, and if it is near 96MHz, then change
+ * to using half the UPLL rate for the system */
+
+ if (clk_get_rate(clk_upll) > (94 * MHZ)) {
+ clk_usb_bus.rate = clk_get_rate(clk_upll) / 2;
+
+ mutex_lock(&clocks_mutex);
+
+ clkdivn = __raw_readl(S3C2410_CLKDIVN);
+ clkdivn |= S3C2440_CLKDIVN_UCLK;
+ __raw_writel(clkdivn, S3C2410_CLKDIVN);
+
+ mutex_unlock(&clocks_mutex);
+ }
+
+ s3c2442_clk_cam.parent = clk_h;
+ s3c2442_clk_cam_upll.parent = clk_upll;
+
+ s3c24xx_register_clock(&s3c2442_clk_cam);
+ s3c24xx_register_clock(&s3c2442_clk_cam_upll);
+
+ clk_disable(&s3c2442_clk_cam);
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2442_clk_driver = {
+ .add = s3c2442_clk_add,
+};
+
+static __init int s3c2442_clk_init(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver);
+}
+
+arch_initcall(s3c2442_clk_init);
diff --git a/arch/arm/mach-s3c2410/s3c2442.c b/arch/arm/mach-s3c2410/s3c2442.c
new file mode 100644
index 000000000000..debae2430557
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2442.c
@@ -0,0 +1,52 @@
+/* linux/arch/arm/mach-s3c2410/s3c2440.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2442 Mobile CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-gpioj.h>
+#include <asm/arch/regs-dsc.h>
+
+#include "s3c2442.h"
+#include "clock.h"
+#include "devs.h"
+#include "cpu.h"
+#include "pm.h"
+
+static struct sys_device s3c2442_sysdev = {
+ .cls = &s3c2442_sysclass,
+};
+
+int __init s3c2442_init(void)
+{
+ printk("S3C2442: Initialising architecture\n");
+
+ return sysdev_register(&s3c2442_sysdev);
+}
diff --git a/arch/arm/mach-s3c2410/s3c2442.h b/arch/arm/mach-s3c2410/s3c2442.h
new file mode 100644
index 000000000000..0ae37d24866c
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2442.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s3c2410/s3c2442.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2442 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2442
+extern int s3c2442_init(void);
+#else
+#define s3c2442_init NULL
+#endif
diff --git a/arch/arm/mach-s3c2410/s3c244x-irq.c b/arch/arm/mach-s3c2410/s3c244x-irq.c
new file mode 100644
index 000000000000..2aadca1ce7eb
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c244x-irq.c
@@ -0,0 +1,142 @@
+/* linux/arch/arm/mach-s3c2410/s3c2440-irq.c
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Changelog:
+ * 25-Jul-2005 BJD Split from irq.c
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+#include "cpu.h"
+#include "pm.h"
+#include "irq.h"
+
+/* camera irq */
+
+static void s3c_irq_demux_cam(unsigned int irq,
+ struct irqdesc *desc,
+ struct pt_regs *regs)
+{
+ unsigned int subsrc, submsk;
+ struct irqdesc *mydesc;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+ subsrc >>= 11;
+ subsrc &= 3;
+
+ if (subsrc != 0) {
+ if (subsrc & 1) {
+ mydesc = irq_desc + IRQ_S3C2440_CAM_C;
+ desc_handle_irq(IRQ_S3C2440_CAM_C, mydesc, regs);
+ }
+ if (subsrc & 2) {
+ mydesc = irq_desc + IRQ_S3C2440_CAM_P;
+ desc_handle_irq(IRQ_S3C2440_CAM_P, mydesc, regs);
+ }
+ }
+}
+
+#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
+
+static void
+s3c_irq_cam_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_CAM, 3<<11);
+}
+
+static void
+s3c_irq_cam_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_CAM);
+}
+
+static void
+s3c_irq_cam_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_CAM, 3<<11);
+}
+
+static struct irqchip s3c_irq_cam = {
+ .mask = s3c_irq_cam_mask,
+ .unmask = s3c_irq_cam_unmask,
+ .ack = s3c_irq_cam_ack,
+};
+
+static int s3c244x_irq_add(struct sys_device *sysdev)
+{
+ unsigned int irqno;
+
+ set_irq_chip(IRQ_NFCON, &s3c_irq_level_chip);
+ set_irq_handler(IRQ_NFCON, do_level_IRQ);
+ set_irq_flags(IRQ_NFCON, IRQF_VALID);
+
+ /* add chained handler for camera */
+
+ set_irq_chip(IRQ_CAM, &s3c_irq_level_chip);
+ set_irq_handler(IRQ_CAM, do_level_IRQ);
+ set_irq_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+
+ for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
+ set_irq_chip(irqno, &s3c_irq_cam);
+ set_irq_handler(irqno, do_level_IRQ);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ return 0;
+}
+
+static struct sysdev_driver s3c244x_irq_driver = {
+ .add = s3c244x_irq_add,
+};
+
+static int s3c2440_irq_init(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass, &s3c244x_irq_driver);
+}
+
+arch_initcall(s3c2440_irq_init);
+
+
+static int s3c2442_irq_init(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass, &s3c244x_irq_driver);
+}
+
+arch_initcall(s3c2442_irq_init);
diff --git a/arch/arm/mach-s3c2410/s3c244x.c b/arch/arm/mach-s3c2410/s3c244x.c
new file mode 100644
index 000000000000..96852a7000db
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c244x.c
@@ -0,0 +1,182 @@
+/* linux/arch/arm/mach-s3c2410/s3c244x.c
+ *
+ * Copyright (c) 2004-2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2440 and S3C2442 Mobile CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-gpioj.h>
+#include <asm/arch/regs-dsc.h>
+
+#include "s3c2440.h"
+#include "s3c244x.h"
+#include "clock.h"
+#include "devs.h"
+#include "cpu.h"
+#include "pm.h"
+
+static struct map_desc s3c244x_iodesc[] __initdata = {
+ IODESC_ENT(CLKPWR),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(WATCHDOG),
+ IODESC_ENT(LCD),
+ IODESC_ENT(ADC),
+ IODESC_ENT(USBHOST),
+};
+
+/* uart initialisation */
+
+void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+}
+
+void __init s3c244x_map_io(struct map_desc *mach_desc, int size)
+{
+ /* register our io-tables */
+
+ iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
+ iotable_init(mach_desc, size);
+
+ /* rename any peripherals used differing from the s3c2410 */
+
+ s3c_device_i2c.name = "s3c2440-i2c";
+ s3c_device_nand.name = "s3c2440-nand";
+}
+
+void __init s3c244x_init_clocks(int xtal)
+{
+ unsigned long clkdiv;
+ unsigned long camdiv;
+ unsigned long hclk, fclk, pclk;
+ int hdiv = 1;
+
+ /* now we've got our machine bits initialised, work out what
+ * clocks we've got */
+
+ fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
+
+ clkdiv = __raw_readl(S3C2410_CLKDIVN);
+ camdiv = __raw_readl(S3C2440_CAMDIVN);
+
+ /* work out clock scalings */
+
+ switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
+ case S3C2440_CLKDIVN_HDIVN_1:
+ hdiv = 1;
+ break;
+
+ case S3C2440_CLKDIVN_HDIVN_2:
+ hdiv = 2;
+ break;
+
+ case S3C2440_CLKDIVN_HDIVN_4_8:
+ hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
+ break;
+
+ case S3C2440_CLKDIVN_HDIVN_3_6:
+ hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
+ break;
+ }
+
+ hclk = fclk / hdiv;
+ pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN)? 2:1);
+
+ /* print brief summary of clocks, etc */
+
+ printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
+ print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
+
+ /* initialise the clocks here, to allow other things like the
+ * console to use them, and to add new ones after the initialisation
+ */
+
+ s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+}
+
+#ifdef CONFIG_PM
+
+static struct sleep_save s3c244x_sleep[] = {
+ SAVE_ITEM(S3C2440_DSC0),
+ SAVE_ITEM(S3C2440_DSC1),
+ SAVE_ITEM(S3C2440_GPJDAT),
+ SAVE_ITEM(S3C2440_GPJCON),
+ SAVE_ITEM(S3C2440_GPJUP)
+};
+
+static int s3c244x_suspend(struct sys_device *dev, pm_message_t state)
+{
+ s3c2410_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+ return 0;
+}
+
+static int s3c244x_resume(struct sys_device *dev)
+{
+ s3c2410_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+ return 0;
+}
+
+#else
+#define s3c244x_suspend NULL
+#define s3c244x_resume NULL
+#endif
+
+/* Since the S3C2442 and S3C2440 share items, put both sysclasses here */
+
+struct sysdev_class s3c2440_sysclass = {
+ set_kset_name("s3c2440-core"),
+ .suspend = s3c244x_suspend,
+ .resume = s3c244x_resume
+};
+
+struct sysdev_class s3c2442_sysclass = {
+ set_kset_name("s3c2442-core"),
+ .suspend = s3c244x_suspend,
+ .resume = s3c244x_resume
+};
+
+/* need to register class before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2440 based system)
+ * as a driver which may support both 2410 and 2440 may try and use it.
+*/
+
+static int __init s3c2440_core_init(void)
+{
+ return sysdev_class_register(&s3c2440_sysclass);
+}
+
+core_initcall(s3c2440_core_init);
+
+static int __init s3c2442_core_init(void)
+{
+ return sysdev_class_register(&s3c2442_sysclass);
+}
+
+core_initcall(s3c2442_core_init);
diff --git a/arch/arm/mach-s3c2410/s3c244x.h b/arch/arm/mach-s3c2410/s3c244x.h
new file mode 100644
index 000000000000..3e7f5f75134d
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c244x.h
@@ -0,0 +1,25 @@
+/* arch/arm/mach-s3c2410/s3c2440.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C2440 and S3C2442 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+
+extern void s3c244x_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c244x_init_clocks(int xtal);
+
+#else
+#define s3c244x_init_clocks NULL
+#define s3c244x_init_uarts NULL
+#define s3c244x_map_io NULL
+#endif
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 73de2eaca22a..5f6761ed96b2 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -66,7 +66,9 @@ ENTRY(s3c2410_cpu_suspend)
@@ flush the caches to ensure everything is back out to
@@ SDRAM before the core powers down
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
bl arm920_flush_kern_cache_all
+#endif
@@ prepare cpu to sleep
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c55b739e10ba..1ff2f073a55d 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -121,8 +121,8 @@ config CPU_ARM925T
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor"
- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB
- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX
+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008
+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
index 3852d0a4c1b5..1a7bdcef1926 100644
--- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -104,7 +104,7 @@ acpi_processor_set_performance (
{
u16 port = 0;
u8 bit_width = 0;
- int ret = 0;
+ int ret;
u32 value = 0;
int i = 0;
struct cpufreq_freqs cpufreq_freqs;
@@ -195,7 +195,6 @@ acpi_processor_set_performance (
udelay(10);
}
} else {
- i = 0;
value = (u32) data->acpi_data.states[state].status;
}
@@ -444,14 +443,15 @@ static struct freq_attr* acpi_cpufreq_attr[] = {
};
static struct cpufreq_driver acpi_cpufreq_driver = {
- .verify = acpi_cpufreq_verify,
- .target = acpi_cpufreq_target,
- .init = acpi_cpufreq_cpu_init,
- .exit = acpi_cpufreq_cpu_exit,
- .resume = acpi_cpufreq_resume,
- .name = "acpi-cpufreq",
- .owner = THIS_MODULE,
- .attr = acpi_cpufreq_attr,
+ .verify = acpi_cpufreq_verify,
+ .target = acpi_cpufreq_target,
+ .init = acpi_cpufreq_cpu_init,
+ .exit = acpi_cpufreq_cpu_exit,
+ .resume = acpi_cpufreq_resume,
+ .name = "acpi-cpufreq",
+ .owner = THIS_MODULE,
+ .attr = acpi_cpufreq_attr,
+ .flags = CPUFREQ_STICKY,
};
diff --git a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
index f275e0d4aee5..0d49d73d1b71 100644
--- a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
+++ b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
@@ -1,5 +1,5 @@
/*
- * (C) 2004 Sebastian Witt <se.witt@gmx.net>
+ * (C) 2004-2006 Sebastian Witt <se.witt@gmx.net>
*
* Licensed under the terms of the GNU GPL License version 2.
* Based upon reverse engineered information
@@ -90,7 +90,7 @@ static int nforce2_calc_pll(unsigned int fsb)
/* Try to calculate multiplier and divider up to 4 times */
while (((mul == 0) || (div == 0)) && (tried <= 3)) {
- for (xdiv = 1; xdiv <= 0x80; xdiv++)
+ for (xdiv = 2; xdiv <= 0x80; xdiv++)
for (xmul = 1; xmul <= 0xfe; xmul++)
if (nforce2_calc_fsb(NFORCE2_PLL(xmul, xdiv)) ==
fsb + tried) {
@@ -117,8 +117,7 @@ static void nforce2_write_pll(int pll)
int temp;
/* Set the pll addr. to 0x00 */
- temp = 0x00;
- pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLADR, temp);
+ pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLADR, 0);
/* Now write the value in all 64 registers */
for (temp = 0; temp <= 0x3f; temp++)
@@ -266,7 +265,7 @@ static int nforce2_target(struct cpufreq_policy *policy,
if (freqs.old == freqs.new)
return 0;
- dprintk(KERN_INFO "cpufreq: Old CPU frequency %d kHz, new %d kHz\n",
+ dprintk("Old CPU frequency %d kHz, new %d kHz\n",
freqs.old, freqs.new);
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
@@ -278,7 +277,7 @@ static int nforce2_target(struct cpufreq_policy *policy,
printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n",
target_fsb);
else
- dprintk(KERN_INFO "cpufreq: Changed FSB successfully to %d\n",
+ dprintk("Changed FSB successfully to %d\n",
target_fsb);
/* Enable IRQs */
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c
index 8ef38544453c..146f607e9c44 100644
--- a/arch/i386/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c
@@ -77,13 +77,17 @@ static char speedbuffer[8];
static char *print_speed(int speed)
{
- if (speed > 1000) {
- if (speed%1000 == 0)
- sprintf (speedbuffer, "%dGHz", speed/1000);
- else
- sprintf (speedbuffer, "%d.%dGHz", speed/1000, (speed%1000)/100);
- } else
- sprintf (speedbuffer, "%dMHz", speed);
+ if (speed < 1000) {
+ snprintf(speedbuffer, sizeof(speedbuffer),"%dMHz", speed);
+ return speedbuffer;
+ }
+
+ if (speed%1000 == 0)
+ snprintf(speedbuffer, sizeof(speedbuffer),
+ "%dGHz", speed/1000);
+ else
+ snprintf(speedbuffer, sizeof(speedbuffer),
+ "%d.%dGHz", speed/1000, (speed%1000)/100);
return speedbuffer;
}
@@ -675,7 +679,7 @@ static int __init longhaul_init(void)
static void __exit longhaul_exit(void)
{
- int i=0;
+ int i;
for (i=0; i < numscales; i++) {
if (clock_ratio[i] == maxmult) {
diff --git a/arch/i386/kernel/cpu/cpufreq/longrun.c b/arch/i386/kernel/cpu/cpufreq/longrun.c
index e3868de4dc2e..b2689514295a 100644
--- a/arch/i386/kernel/cpu/cpufreq/longrun.c
+++ b/arch/i386/kernel/cpu/cpufreq/longrun.c
@@ -223,7 +223,6 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq,
/* set to 0 to try_hi perf_pctg */
msr_lo &= 0xFFFFFF80;
msr_hi &= 0xFFFFFF80;
- msr_lo |= 0;
msr_hi |= try_hi;
wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
index 2bf4237cb94e..694d4793bf6a 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
@@ -452,23 +452,23 @@ static int powernow_decode_bios (int maxfid, int startvid)
pst = (struct pst_s *) p;
- for (i = 0 ; i <psb->numpst; i++) {
+ for (j=0; j<psb->numpst; j++) {
pst = (struct pst_s *) p;
number_scales = pst->numpstates;
if ((etuple == pst->cpuid) && check_fsb(pst->fsbspeed) &&
(maxfid==pst->maxfid) && (startvid==pst->startvid))
{
- dprintk ("PST:%d (@%p)\n", i, pst);
+ dprintk ("PST:%d (@%p)\n", j, pst);
dprintk (" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n",
pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
ret = get_ranges ((char *) pst + sizeof (struct pst_s));
return ret;
-
} else {
+ unsigned int k;
p = (char *) pst + sizeof (struct pst_s);
- for (j=0 ; j < number_scales; j++)
+ for (k=0; k<number_scales; k++)
p+=2;
}
}
@@ -581,10 +581,7 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy)
rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
- /* recalibrate cpu_khz */
- result = recalibrate_cpu_khz();
- if (result)
- return result;
+ recalibrate_cpu_khz();
fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID];
if (!fsb) {
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
index 71fffa174425..b4277f58f40c 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
@@ -1,5 +1,5 @@
/*
- * (c) 2003, 2004, 2005 Advanced Micro Devices, Inc.
+ * (c) 2003-2006 Advanced Micro Devices, Inc.
* Your use of this code is subject to the terms and conditions of the
* GNU general public license version 2. See "COPYING" or
* http://www.gnu.org/licenses/gpl.html
@@ -14,13 +14,13 @@
* Based upon datasheets & sample CPUs kindly provided by AMD.
*
* Valuable input gratefully received from Dave Jones, Pavel Machek,
- * Dominik Brodowski, and others.
+ * Dominik Brodowski, Jacob Shin, and others.
* Originally developed by Paul Devriendt.
* Processor information obtained from Chapter 9 (Power and Thermal Management)
* of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD
* Opteron Processors" available for download from www.amd.com
*
- * Tables for specific CPUs can be infrerred from
+ * Tables for specific CPUs can be inferred from
* http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf
*/
@@ -46,7 +46,7 @@
#define PFX "powernow-k8: "
#define BFX PFX "BIOS error: "
-#define VERSION "version 1.60.2"
+#define VERSION "version 2.00.00"
#include "powernow-k8.h"
/* serialize freq changes */
@@ -54,6 +54,8 @@ static DEFINE_MUTEX(fidvid_mutex);
static struct powernow_k8_data *powernow_data[NR_CPUS];
+static int cpu_family = CPU_OPTERON;
+
#ifndef CONFIG_SMP
static cpumask_t cpu_core_map[1];
#endif
@@ -64,16 +66,36 @@ static u32 find_freq_from_fid(u32 fid)
return 800 + (fid * 100);
}
+
/* Return a frequency in KHz, given an input fid */
static u32 find_khz_freq_from_fid(u32 fid)
{
return 1000 * find_freq_from_fid(fid);
}
-/* Return a voltage in miliVolts, given an input vid */
-static u32 find_millivolts_from_vid(struct powernow_k8_data *data, u32 vid)
+/* Return a frequency in MHz, given an input fid and did */
+static u32 find_freq_from_fiddid(u32 fid, u32 did)
+{
+ return 100 * (fid + 0x10) >> did;
+}
+
+static u32 find_khz_freq_from_fiddid(u32 fid, u32 did)
{
- return 1550-vid*25;
+ return 1000 * find_freq_from_fiddid(fid, did);
+}
+
+static u32 find_fid_from_pstate(u32 pstate)
+{
+ u32 hi, lo;
+ rdmsr(MSR_PSTATE_DEF_BASE + pstate, lo, hi);
+ return lo & HW_PSTATE_FID_MASK;
+}
+
+static u32 find_did_from_pstate(u32 pstate)
+{
+ u32 hi, lo;
+ rdmsr(MSR_PSTATE_DEF_BASE + pstate, lo, hi);
+ return (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT;
}
/* Return the vco fid for an input fid
@@ -98,6 +120,9 @@ static int pending_bit_stuck(void)
{
u32 lo, hi;
+ if (cpu_family)
+ return 0;
+
rdmsr(MSR_FIDVID_STATUS, lo, hi);
return lo & MSR_S_LO_CHANGE_PENDING ? 1 : 0;
}
@@ -111,6 +136,14 @@ static int query_current_values_with_pending_wait(struct powernow_k8_data *data)
u32 lo, hi;
u32 i = 0;
+ if (cpu_family) {
+ rdmsr(MSR_PSTATE_STATUS, lo, hi);
+ i = lo & HW_PSTATE_MASK;
+ rdmsr(MSR_PSTATE_DEF_BASE + i, lo, hi);
+ data->currfid = lo & HW_PSTATE_FID_MASK;
+ data->currdid = (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT;
+ return 0;
+ }
do {
if (i++ > 10000) {
dprintk("detected change pending stuck\n");
@@ -175,7 +208,7 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid)
do {
wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
if (i++ > 100) {
- printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
+ printk(KERN_ERR PFX "Hardware error - pending bit very stuck - no further pstate changes possible\n");
return 1;
}
} while (query_current_values_with_pending_wait(data));
@@ -255,7 +288,15 @@ static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid,
return 0;
}
-/* Change the fid and vid, by the 3 phases. */
+/* Change hardware pstate by single MSR write */
+static int transition_pstate(struct powernow_k8_data *data, u32 pstate)
+{
+ wrmsr(MSR_PSTATE_CTRL, pstate, 0);
+ data->currfid = find_fid_from_pstate(pstate);
+ return 0;
+}
+
+/* Change Opteron/Athlon64 fid and vid, by the 3 phases. */
static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 reqvid)
{
if (core_voltage_pre_transition(data, reqvid))
@@ -474,26 +515,35 @@ static int check_supported_cpu(unsigned int cpu)
goto out;
eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
- if ((eax & CPUID_XFAM) != CPUID_XFAM_K8)
+ if (((eax & CPUID_XFAM) != CPUID_XFAM_K8) &&
+ ((eax & CPUID_XFAM) < CPUID_XFAM_10H))
goto out;
- if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
- ((eax & CPUID_XMOD) > CPUID_XMOD_REV_G)) {
- printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
- goto out;
- }
+ if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) {
+ if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
+ ((eax & CPUID_XMOD) > CPUID_XMOD_REV_G)) {
+ printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
+ goto out;
+ }
- eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES);
- if (eax < CPUID_FREQ_VOLT_CAPABILITIES) {
- printk(KERN_INFO PFX
- "No frequency change capabilities detected\n");
- goto out;
- }
+ eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES);
+ if (eax < CPUID_FREQ_VOLT_CAPABILITIES) {
+ printk(KERN_INFO PFX
+ "No frequency change capabilities detected\n");
+ goto out;
+ }
- cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
- if ((edx & P_STATE_TRANSITION_CAPABLE) != P_STATE_TRANSITION_CAPABLE) {
- printk(KERN_INFO PFX "Power state transitions not supported\n");
- goto out;
+ cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
+ if ((edx & P_STATE_TRANSITION_CAPABLE) != P_STATE_TRANSITION_CAPABLE) {
+ printk(KERN_INFO PFX "Power state transitions not supported\n");
+ goto out;
+ }
+ } else { /* must be a HW Pstate capable processor */
+ cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
+ if ((edx & USE_HW_PSTATE) == USE_HW_PSTATE)
+ cpu_family = CPU_HW_PSTATE;
+ else
+ goto out;
}
rc = 1;
@@ -547,12 +597,18 @@ static void print_basics(struct powernow_k8_data *data)
{
int j;
for (j = 0; j < data->numps; j++) {
- if (data->powernow_table[j].frequency != CPUFREQ_ENTRY_INVALID)
- printk(KERN_INFO PFX " %d : fid 0x%x (%d MHz), vid 0x%x (%d mV)\n", j,
+ if (data->powernow_table[j].frequency != CPUFREQ_ENTRY_INVALID) {
+ if (cpu_family) {
+ printk(KERN_INFO PFX " %d : fid 0x%x gid 0x%x (%d MHz)\n", j, (data->powernow_table[j].index & 0xff00) >> 8,
+ (data->powernow_table[j].index & 0xff0000) >> 16,
+ data->powernow_table[j].frequency/1000);
+ } else {
+ printk(KERN_INFO PFX " %d : fid 0x%x (%d MHz), vid 0x%x\n", j,
data->powernow_table[j].index & 0xff,
data->powernow_table[j].frequency/1000,
- data->powernow_table[j].index >> 8,
- find_millivolts_from_vid(data, data->powernow_table[j].index >> 8));
+ data->powernow_table[j].index >> 8);
+ }
+ }
}
if (data->batps)
printk(KERN_INFO PFX "Only %d pstates on battery\n", data->batps);
@@ -702,7 +758,7 @@ static int find_psb_table(struct powernow_k8_data *data)
#ifdef CONFIG_X86_POWERNOW_K8_ACPI
static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index)
{
- if (!data->acpi_data.state_count)
+ if (!data->acpi_data.state_count || cpu_family)
return;
data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK;
@@ -715,9 +771,8 @@ static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned
static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
{
- int i;
- int cntlofreq = 0;
struct cpufreq_frequency_table *powernow_table;
+ int ret_val;
if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
dprintk("register performance failed: bad ACPI data\n");
@@ -746,6 +801,85 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
goto err_out;
}
+ if (cpu_family)
+ ret_val = fill_powernow_table_pstate(data, powernow_table);
+ else
+ ret_val = fill_powernow_table_fidvid(data, powernow_table);
+ if (ret_val)
+ goto err_out_mem;
+
+ powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END;
+ powernow_table[data->acpi_data.state_count].index = 0;
+ data->powernow_table = powernow_table;
+
+ /* fill in data */
+ data->numps = data->acpi_data.state_count;
+ print_basics(data);
+ powernow_k8_acpi_pst_values(data, 0);
+
+ /* notify BIOS that we exist */
+ acpi_processor_notify_smm(THIS_MODULE);
+
+ return 0;
+
+err_out_mem:
+ kfree(powernow_table);
+
+err_out:
+ acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
+
+ /* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */
+ data->acpi_data.state_count = 0;
+
+ return -ENODEV;
+}
+
+static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table)
+{
+ int i;
+
+ for (i = 0; i < data->acpi_data.state_count; i++) {
+ u32 index;
+ u32 hi = 0, lo = 0;
+ u32 fid;
+ u32 did;
+
+ index = data->acpi_data.states[i].control & HW_PSTATE_MASK;
+ if (index > MAX_HW_PSTATE) {
+ printk(KERN_ERR PFX "invalid pstate %d - bad value %d.\n", i, index);
+ printk(KERN_ERR PFX "Please report to BIOS manufacturer\n");
+ }
+ rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi);
+ if (!(hi & HW_PSTATE_VALID_MASK)) {
+ dprintk("invalid pstate %d, ignoring\n", index);
+ powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ continue;
+ }
+
+ fid = lo & HW_PSTATE_FID_MASK;
+ did = (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT;
+
+ dprintk(" %d : fid 0x%x, did 0x%x\n", index, fid, did);
+
+ powernow_table[i].index = index | (fid << HW_FID_INDEX_SHIFT) | (did << HW_DID_INDEX_SHIFT);
+
+ powernow_table[i].frequency = find_khz_freq_from_fiddid(fid, did);
+
+ if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) {
+ printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n",
+ powernow_table[i].frequency,
+ (unsigned int) (data->acpi_data.states[i].core_frequency * 1000));
+ powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ continue;
+ }
+ }
+ return 0;
+}
+
+static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table)
+{
+ int i;
+ int cntlofreq = 0;
for (i = 0; i < data->acpi_data.state_count; i++) {
u32 fid;
u32 vid;
@@ -786,7 +920,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) ||
(powernow_table[i].index != powernow_table[cntlofreq].index)) {
printk(KERN_ERR PFX "Too many lo freq table entries\n");
- goto err_out_mem;
+ return 1;
}
dprintk("double low frequency table entry, ignoring it.\n");
@@ -804,31 +938,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
continue;
}
}
-
- powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END;
- powernow_table[data->acpi_data.state_count].index = 0;
- data->powernow_table = powernow_table;
-
- /* fill in data */
- data->numps = data->acpi_data.state_count;
- print_basics(data);
- powernow_k8_acpi_pst_values(data, 0);
-
- /* notify BIOS that we exist */
- acpi_processor_notify_smm(THIS_MODULE);
-
return 0;
-
-err_out_mem:
- kfree(powernow_table);
-
-err_out:
- acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
-
- /* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */
- data->acpi_data.state_count = 0;
-
- return -ENODEV;
}
static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data)
@@ -844,20 +954,20 @@ static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned
#endif /* CONFIG_X86_POWERNOW_K8_ACPI */
/* Take a frequency, and issue the fid/vid transition command */
-static int transition_frequency(struct powernow_k8_data *data, unsigned int index)
+static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned int index)
{
- u32 fid;
- u32 vid;
+ u32 fid = 0;
+ u32 vid = 0;
int res, i;
struct cpufreq_freqs freqs;
dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
+ /* fid/vid correctness check for k8 */
/* fid are the lower 8 bits of the index we stored into
- * the cpufreq frequency table in find_psb_table, vid are
- * the upper 8 bits.
+ * the cpufreq frequency table in find_psb_table, vid
+ * are the upper 8 bits.
*/
-
fid = data->powernow_table[index].index & 0xFF;
vid = (data->powernow_table[index].index & 0xFF00) >> 8;
@@ -881,22 +991,58 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde
dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n",
smp_processor_id(), fid, vid);
-
- freqs.cpu = data->cpu;
freqs.old = find_khz_freq_from_fid(data->currfid);
freqs.new = find_khz_freq_from_fid(fid);
- for_each_cpu_mask(i, cpu_core_map[data->cpu]) {
+
+ for_each_cpu_mask(i, *(data->available_cores)) {
freqs.cpu = i;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
}
res = transition_fid_vid(data, fid, vid);
-
freqs.new = find_khz_freq_from_fid(data->currfid);
- for_each_cpu_mask(i, cpu_core_map[data->cpu]) {
+
+ for_each_cpu_mask(i, *(data->available_cores)) {
freqs.cpu = i;
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
- }
+ }
+ return res;
+}
+
+/* Take a frequency, and issue the hardware pstate transition command */
+static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned int index)
+{
+ u32 fid = 0;
+ u32 did = 0;
+ u32 pstate = 0;
+ int res, i;
+ struct cpufreq_freqs freqs;
+
+ dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
+
+ /* get fid did for hardware pstate transition */
+ pstate = index & HW_PSTATE_MASK;
+ if (pstate > MAX_HW_PSTATE)
+ return 0;
+ fid = (index & HW_FID_INDEX_MASK) >> HW_FID_INDEX_SHIFT;
+ did = (index & HW_DID_INDEX_MASK) >> HW_DID_INDEX_SHIFT;
+ freqs.old = find_khz_freq_from_fiddid(data->currfid, data->currdid);
+ freqs.new = find_khz_freq_from_fiddid(fid, did);
+
+ for_each_cpu_mask(i, *(data->available_cores)) {
+ freqs.cpu = i;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ }
+
+ res = transition_pstate(data, pstate);
+ data->currfid = find_fid_from_pstate(pstate);
+ data->currdid = find_did_from_pstate(pstate);
+ freqs.new = find_khz_freq_from_fiddid(data->currfid, data->currdid);
+
+ for_each_cpu_mask(i, *(data->available_cores)) {
+ freqs.cpu = i;
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ }
return res;
}
@@ -933,18 +1079,21 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
dprintk("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n",
pol->cpu, targfreq, pol->min, pol->max, relation);
- if (query_current_values_with_pending_wait(data)) {
- ret = -EIO;
+ if (query_current_values_with_pending_wait(data))
goto err_out;
- }
- dprintk("targ: curr fid 0x%x, vid 0x%x\n",
+ if (cpu_family)
+ dprintk("targ: curr fid 0x%x, did 0x%x\n",
+ data->currfid, data->currvid);
+ else {
+ dprintk("targ: curr fid 0x%x, vid 0x%x\n",
data->currfid, data->currvid);
- if ((checkvid != data->currvid) || (checkfid != data->currfid)) {
- printk(KERN_INFO PFX
- "error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n",
- checkfid, data->currfid, checkvid, data->currvid);
+ if ((checkvid != data->currvid) || (checkfid != data->currfid)) {
+ printk(KERN_INFO PFX
+ "error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n",
+ checkfid, data->currfid, checkvid, data->currvid);
+ }
}
if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate))
@@ -954,7 +1103,11 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
powernow_k8_acpi_pst_values(data, newstate);
- if (transition_frequency(data, newstate)) {
+ if (cpu_family)
+ ret = transition_frequency_pstate(data, newstate);
+ else
+ ret = transition_frequency_fidvid(data, newstate);
+ if (ret) {
printk(KERN_ERR PFX "transition frequency failed\n");
ret = 1;
mutex_unlock(&fidvid_mutex);
@@ -962,7 +1115,10 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
}
mutex_unlock(&fidvid_mutex);
- pol->cur = find_khz_freq_from_fid(data->currfid);
+ if (cpu_family)
+ pol->cur = find_khz_freq_from_fiddid(data->currfid, data->currdid);
+ else
+ pol->cur = find_khz_freq_from_fid(data->currfid);
ret = 0;
err_out:
@@ -1007,14 +1163,13 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
* Use the PSB BIOS structure. This is only availabe on
* an UP version, and is deprecated by AMD.
*/
-
if ((num_online_cpus() != 1) || (num_possible_cpus() != 1)) {
printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n");
kfree(data);
return -ENODEV;
}
if (pol->cpu != 0) {
- printk(KERN_ERR PFX "init not cpu 0\n");
+ printk(KERN_ERR PFX "No _PSS objects for CPU other than CPU0\n");
kfree(data);
return -ENODEV;
}
@@ -1042,20 +1197,28 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
if (query_current_values_with_pending_wait(data))
goto err_out;
- fidvid_msr_init();
+ if (!cpu_family)
+ fidvid_msr_init();
/* run on any CPU again */
set_cpus_allowed(current, oldmask);
pol->governor = CPUFREQ_DEFAULT_GOVERNOR;
- pol->cpus = cpu_core_map[pol->cpu];
+ if (cpu_family)
+ pol->cpus = cpumask_of_cpu(pol->cpu);
+ else
+ pol->cpus = cpu_core_map[pol->cpu];
+ data->available_cores = &(pol->cpus);
/* Take a crude guess here.
* That guess was in microseconds, so multiply with 1000 */
pol->cpuinfo.transition_latency = (((data->rvo + 8) * data->vstable * VST_UNITS_20US)
+ (3 * (1 << data->irt) * 10)) * 1000;
- pol->cur = find_khz_freq_from_fid(data->currfid);
+ if (cpu_family)
+ pol->cur = find_khz_freq_from_fiddid(data->currfid, data->currdid);
+ else
+ pol->cur = find_khz_freq_from_fid(data->currfid);
dprintk("policy current frequency %d kHz\n", pol->cur);
/* min/max the cpu is capable of */
@@ -1069,8 +1232,12 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu);
- printk("cpu_init done, current fid 0x%x, vid 0x%x\n",
- data->currfid, data->currvid);
+ if (cpu_family)
+ dprintk("cpu_init done, current fid 0x%x, did 0x%x\n",
+ data->currfid, data->currdid);
+ else
+ dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n",
+ data->currfid, data->currvid);
powernow_data[pol->cpu] = data;
@@ -1156,8 +1323,9 @@ static int __cpuinit powernowk8_init(void)
}
if (supported_cpus == num_online_cpus()) {
- printk(KERN_INFO PFX "Found %d AMD Athlon 64 / Opteron "
- "processors (" VERSION ")\n", supported_cpus);
+ printk(KERN_INFO PFX "Found %d %s "
+ "processors (" VERSION ")\n", supported_cpus,
+ boot_cpu_data.x86_model_id);
return cpufreq_register_driver(&cpufreq_amd64_driver);
}
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
index 79a7c5c87edc..bf8ad9e43da3 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
@@ -1,5 +1,5 @@
/*
- * (c) 2003, 2004, 2005 Advanced Micro Devices, Inc.
+ * (c) 2003-2006 Advanced Micro Devices, Inc.
* Your use of this code is subject to the terms and conditions of the
* GNU general public license version 2. See "COPYING" or
* http://www.gnu.org/licenses/gpl.html
@@ -21,8 +21,8 @@ struct powernow_k8_data {
u32 plllock; /* pll lock time, units 1 us */
u32 exttype; /* extended interface = 1 */
- /* keep track of the current fid / vid */
- u32 currvid, currfid;
+ /* keep track of the current fid / vid or did */
+ u32 currvid, currfid, currdid;
/* the powernow_table includes all frequency and vid/fid pairings:
* fid are the lower 8 bits of the index, vid are the upper 8 bits.
@@ -34,6 +34,10 @@ struct powernow_k8_data {
* used to determine valid frequency/vid/fid states */
struct acpi_processor_performance acpi_data;
#endif
+ /* we need to keep track of associated cores, but let cpufreq
+ * handle hotplug events - so just point at cpufreq pol->cpus
+ * structure */
+ cpumask_t *available_cores;
};
@@ -43,6 +47,7 @@ struct powernow_k8_data {
#define CPUID_XFAM_K8 0
#define CPUID_XMOD 0x000f0000 /* extended model */
#define CPUID_XMOD_REV_G 0x00060000
+#define CPUID_XFAM_10H 0x00100000 /* family 0x10 */
#define CPUID_USE_XFAM_XMOD 0x00000f00
#define CPUID_GET_MAX_CAPABILITIES 0x80000000
#define CPUID_FREQ_VOLT_CAPABILITIES 0x80000007
@@ -79,6 +84,32 @@ struct powernow_k8_data {
#define MSR_S_HI_CURRENT_VID 0x0000003f
#define MSR_C_HI_STP_GNT_BENIGN 0x00000001
+
+/* Hardware Pstate _PSS and MSR definitions */
+#define USE_HW_PSTATE 0x00000080
+#define HW_PSTATE_FID_MASK 0x0000003f
+#define HW_PSTATE_DID_MASK 0x000001c0
+#define HW_PSTATE_DID_SHIFT 6
+#define HW_PSTATE_MASK 0x00000007
+#define HW_PSTATE_VALID_MASK 0x80000000
+#define HW_FID_INDEX_SHIFT 8
+#define HW_FID_INDEX_MASK 0x0000ff00
+#define HW_DID_INDEX_SHIFT 16
+#define HW_DID_INDEX_MASK 0x00ff0000
+#define HW_WATTS_MASK 0xff
+#define HW_PWR_DVR_MASK 0x300
+#define HW_PWR_DVR_SHIFT 8
+#define HW_PWR_MAX_MULT 3
+#define MAX_HW_PSTATE 8 /* hw pstate supports up to 8 */
+#define MSR_PSTATE_DEF_BASE 0xc0010064 /* base of Pstate MSRs */
+#define MSR_PSTATE_STATUS 0xc0010063 /* Pstate Status MSR */
+#define MSR_PSTATE_CTRL 0xc0010062 /* Pstate control MSR */
+
+/* define the two driver architectures */
+#define CPU_OPTERON 0
+#define CPU_HW_PSTATE 1
+
+
/*
* There are restrictions frequencies have to follow:
* - only 1 entry in the low fid table ( <=1.4GHz )
@@ -182,6 +213,9 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index);
+static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table);
+static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table);
+
#ifdef CONFIG_SMP
static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[])
{
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
index b0ff9075708c..ce54ff12c15d 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -250,7 +250,7 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy)
if (model->cpu_id == NULL) {
/* No match at all */
- dprintk(KERN_INFO PFX "no support for CPU model \"%s\": "
+ dprintk("no support for CPU model \"%s\": "
"send /proc/cpuinfo to " MAINTAINER "\n",
cpu->x86_model_id);
return -ENOENT;
@@ -258,10 +258,10 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy)
if (model->op_points == NULL) {
/* Matched a non-match */
- dprintk(KERN_INFO PFX "no table support for CPU model \"%s\"\n",
+ dprintk("no table support for CPU model \"%s\"\n",
cpu->x86_model_id);
#ifndef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
- dprintk(KERN_INFO PFX "try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled\n");
+ dprintk("try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled\n");
#endif
return -ENOENT;
}
@@ -368,7 +368,7 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy)
/* register with ACPI core */
if (acpi_processor_register_performance(&p, cpu)) {
- dprintk(KERN_INFO PFX "obtaining ACPI data failed\n");
+ dprintk("obtaining ACPI data failed\n");
return -EIO;
}
@@ -465,7 +465,7 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy)
kfree(centrino_model[cpu]);
err_unreg:
acpi_processor_unregister_performance(&p, cpu);
- dprintk(KERN_INFO PFX "invalid ACPI data\n");
+ dprintk("invalid ACPI data\n");
return (result);
}
#else
@@ -499,7 +499,7 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
centrino_cpu[policy->cpu] = &cpu_ids[i];
if (!centrino_cpu[policy->cpu]) {
- dprintk(KERN_INFO PFX "found unsupported CPU with "
+ dprintk("found unsupported CPU with "
"Enhanced SpeedStep: send /proc/cpuinfo to "
MAINTAINER "\n");
return -ENODEV;
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e8ff09fe73d9..35e038a974c6 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -119,6 +119,32 @@ config MIPS_MIRAGE
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_LITTLE_ENDIAN
+config BASLER_EXCITE
+ bool "Basler eXcite smart camera support"
+ select DMA_COHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select IRQ_CPU_RM7K
+ select IRQ_CPU_RM9K
+ select SERIAL_RM9000
+ select SYS_HAS_CPU_RM9000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ The eXcite is a smart camera platform manufactured by
+ Basler Vision Technologies AG
+
+config BASLER_EXCITE_PROTOTYPE
+ bool "Support for pre-release units"
+ depends on BASLER_EXCITE
+ default n
+ help
+ Pre-series (prototype) units are different from later ones in
+ some ways. Select this option if you have one of these. Please
+ note that a kernel built with this option selected will not be
+ able to run on normal units.
+
config MIPS_COBALT
bool "Cobalt Server"
select DMA_NONCOHERENT
@@ -142,6 +168,9 @@ config MACH_DECSTATION
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_128HZ
+ select SYS_SUPPORTS_256HZ
+ select SYS_SUPPORTS_1024HZ
help
This enables support for DEC's MIPS based workstations. For details
see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
@@ -239,6 +268,7 @@ config MACH_JAZZ
select SYS_HAS_CPU_R4X00
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_100HZ
help
This a family of machines based on the MIPS R4030 chipset which was
used by several vendors to build RISC/os and Windows NT workstations.
@@ -327,6 +357,27 @@ config MIPS_SEAD
This enables support for the MIPS Technologies SEAD evaluation
board.
+config WR_PPMC
+ bool "Support for Wind River PPMC board"
+ select IRQ_CPU
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select MIPS_GT64120
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_CPU_MIPS64_R1
+ select SYS_HAS_CPU_NEVADA
+ select SYS_HAS_CPU_RM7000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This enables support for the Wind River MIPS32 4KC PPMC evaluation
+ board, which is based on GT64120 bridge chip.
+
config MIPS_SIM
bool 'MIPS simulator (MIPSsim)'
select DMA_NONCOHERENT
@@ -438,53 +489,16 @@ config MIPS_XXS1500
config PNX8550_V2PCI
bool "Philips PNX8550 based Viper2-PCI board"
+ depends on BROKEN
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
config PNX8550_JBS
bool "Philips PNX8550 based JBS board"
+ depends on BROKEN
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
-config DDB5074
- bool "NEC DDB Vrc-5074 (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select DDB5XXX_COMMON
- select DMA_NONCOHERENT
- select HAVE_STD_PC_SERIAL_PORT
- select HW_HAS_PCI
- select IRQ_CPU
- select I8259
- select ISA
- select SYS_HAS_CPU_R5000
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- help
- This enables support for the VR5000-based NEC DDB Vrc-5074
- evaluation board.
-
-config DDB5476
- bool "NEC DDB Vrc-5476"
- select DDB5XXX_COMMON
- select DMA_NONCOHERENT
- select HAVE_STD_PC_SERIAL_PORT
- select HW_HAS_PCI
- select IRQ_CPU
- select I8259
- select ISA
- select SYS_HAS_CPU_R5432
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- help
- This enables support for the R5432-based NEC DDB Vrc-5476
- evaluation board.
-
- Features : kernel debugging, serial terminal, NFS root fs, on-board
- ether port USB, AC97, PCI, PCI VGA card & framebuffer console,
- IDE controller, PS2 keyboard, PS2 mouse, etc.
-
config DDB5477
bool "NEC DDB Vrc-5477"
select DDB5XXX_COMMON
@@ -546,6 +560,20 @@ config QEMU
simulate actual MIPS hardware platforms. More information on Qemu
can be found at http://www.linux-mips.org/wiki/Qemu.
+config MARKEINS
+ bool "Support for NEC EMMA2RH Mark-eins"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select SWAP_IO_SPACE
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_CPU_R5000
+ help
+ This enables support for the R5432-based NEC Mark-eins
+ boards with R5500 CPU.
+
config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)"
select ARC
@@ -555,6 +583,7 @@ config SGI_IP22
select HW_HAS_EISA
select IP22_CPU_SCACHE
select IRQ_CPU
+ select NO_ISA if ISA
select SWAP_IO_SPACE
select SYS_HAS_CPU_R4X00
select SYS_HAS_CPU_R5000
@@ -577,6 +606,7 @@ config SGI_IP27
select SYS_HAS_CPU_R10000
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_NUMA
help
This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
workstations. To compile a Linux kernel that runs on these, say Y
@@ -707,8 +737,8 @@ config SIBYTE_CRHONE
config SNI_RM200_PCI
bool "SNI RM200 PCI"
- select ARC
- select ARC32
+ select ARC if CPU_LITTLE_ENDIAN
+ select ARC32 if CPU_LITTLE_ENDIAN
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select DMA_NONCOHERENT
@@ -719,10 +749,13 @@ config SNI_RM200_PCI
select I8253
select I8259
select ISA
+ select SWAP_IO_SPACE if CPU_BIG_ENDIAN
select SYS_HAS_CPU_R4X00
+ select SYS_HAS_CPU_R5000
+ select R5000_CPU_SCACHE
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- select SYS_SUPPORTS_BIG_ENDIAN if EXPERIMENTAL
+ select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
help
@@ -979,6 +1012,11 @@ config SOC_PNX8550
config SWAP_IO_SPACE
bool
+config EMMA2RH
+ bool
+ depends on MARKEINS
+ default y
+
#
# Unfortunately not all GT64120 systems run the chip at the same clock.
# As the user for the clock rate and try to minimize the available options.
@@ -1607,6 +1645,28 @@ config ARCH_FLATMEM_ENABLE
def_bool y
depends on !NUMA
+config ARCH_DISCONTIGMEM_ENABLE
+ bool
+ default y if SGI_IP27
+ help
+ Say Y to upport efficient handling of discontiguous physical memory,
+ for architectures which are either NUMA (Non-Uniform Memory Access)
+ or have huge holes in the physical address space for other reasons.
+ See <file:Documentation/vm/numa> for more.
+
+config NUMA
+ bool "NUMA Support"
+ depends on SYS_SUPPORTS_NUMA
+ help
+ Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+ Access). This option improves performance on systems with more
+ than two nodes; on two node systems it is generally better to
+ leave it disabled; on single node systems disable this option
+ disabled.
+
+config SYS_SUPPORTS_NUMA
+ bool
+
config NODES_SHIFT
int
default "6"
@@ -1651,6 +1711,77 @@ config NR_CPUS
This is purely to save memory - each supported CPU adds
approximately eight kilobytes to the kernel image.
+#
+# Timer Interrupt Frequency Configuration
+#
+
+choice
+ prompt "Timer frequency"
+ default HZ_250
+ help
+ Allows the configuration of the timer frequency.
+
+ config HZ_48
+ bool "48 HZ" if SYS_SUPPORTS_48HZ
+
+ config HZ_100
+ bool "100 HZ" if SYS_SUPPORTS_100HZ || SYS_SUPPORTS_ARBIT_HZ
+
+ config HZ_128
+ bool "128 HZ" if SYS_SUPPORTS_128HZ || SYS_SUPPORTS_ARBIT_HZ
+
+ config HZ_250
+ bool "250 HZ" if SYS_SUPPORTS_250HZ || SYS_SUPPORTS_ARBIT_HZ
+
+ config HZ_256
+ bool "256 HZ" if SYS_SUPPORTS_256HZ || SYS_SUPPORTS_ARBIT_HZ
+
+ config HZ_1000
+ bool "1000 HZ" if SYS_SUPPORTS_1000HZ || SYS_SUPPORTS_ARBIT_HZ
+
+ config HZ_1024
+ bool "1024 HZ" if SYS_SUPPORTS_1024HZ || SYS_SUPPORTS_ARBIT_HZ
+
+endchoice
+
+config SYS_SUPPORTS_48HZ
+ bool
+
+config SYS_SUPPORTS_100HZ
+ bool
+
+config SYS_SUPPORTS_128HZ
+ bool
+
+config SYS_SUPPORTS_250HZ
+ bool
+
+config SYS_SUPPORTS_256HZ
+ bool
+
+config SYS_SUPPORTS_1000HZ
+ bool
+
+config SYS_SUPPORTS_1024HZ
+ bool
+
+config SYS_SUPPORTS_ARBIT_HZ
+ bool
+ default y if !SYS_SUPPORTS_48HZ && !SYS_SUPPORTS_100HZ && \
+ !SYS_SUPPORTS_128HZ && !SYS_SUPPORTS_250HZ && \
+ !SYS_SUPPORTS_256HZ && !SYS_SUPPORTS_1000HZ && \
+ !SYS_SUPPORTS_1024HZ
+
+config HZ
+ int
+ default 48 if HZ_48
+ default 100 if HZ_100
+ default 128 if HZ_128
+ default 250 if HZ_250
+ default 256 if HZ_256
+ default 1000 if HZ_1000
+ default 1024 if HZ_1024
+
source "kernel/Kconfig.preempt"
config RTC_DS1742
@@ -1710,6 +1841,9 @@ source "drivers/pci/Kconfig"
config ISA
bool
+config NO_ISA
+ bool
+
config EISA
bool "EISA support"
depends on HW_HAS_EISA
@@ -1840,6 +1974,32 @@ config PM
bool "Power Management support (EXPERIMENTAL)"
depends on EXPERIMENTAL && SOC_AU1X00
+config APM
+ tristate "Advanced Power Management Emulation"
+ depends on PM
+ ---help---
+ APM is a BIOS specification for saving power using several different
+ techniques. This is mostly useful for battery powered systems with
+ APM compliant BIOSes. If you say Y here, the system time will be
+ reset after a RESUME operation, the /proc/apm device will provide
+ battery status information, and user-space programs will receive
+ notification of APM "events" (e.g. battery status change).
+
+ In order to use APM, you will need supporting software. For location
+ and more information, read <file:Documentation/pm.txt> and the
+ Battery Powered Linux mini-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ This driver does not spin down disk drives (see the hdparm(8)
+ manpage ("man 8 hdparm") for that), and it doesn't turn off
+ VESA-compliant "green" monitors.
+
+ Generally, if you don't have a battery in your machine, there isn't
+ much point in using this driver and you should say N. If you get
+ random kernel OOPSes or reboots that don't seem to be related to
+ anything, try disabling/enabling this option (or disabling/enabling
+ APM in your BIOS).
+
endmenu
source "net/Kconfig"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 133900aca992..d5930148495a 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -83,6 +83,8 @@ cflags-y += -msoft-float
LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
MODFLAGS += -mlong-calls
+cflags-y += -ffreestanding
+
#
# We explicitly add the endianness specifier if needed, this allows
# to compile kernels with a toolchain for the other endianness. We
@@ -285,6 +287,13 @@ cflags-$(CONFIG_MIPS_EV96100) += -Iinclude/asm-mips/mach-ev96100
load-$(CONFIG_MIPS_EV96100) += 0xffffffff80100000
#
+# Wind River PPMC Board (4KC + GT64120)
+#
+core-$(CONFIG_WR_PPMC) += arch/mips/gt64120/wrppmc/
+cflags-$(CONFIG_WR_PPMC) += -Iinclude/asm-mips/mach-wrppmc
+load-$(CONFIG_WR_PPMC) += 0xffffffff80100000
+
+#
# Globespan IVR eval board with QED 5231 CPU
#
core-$(CONFIG_ITE_BOARD_GEN) += arch/mips/ite-boards/generic/
@@ -379,6 +388,13 @@ cflags-$(CONFIG_MOMENCO_OCELOT_3) += -Iinclude/asm-mips/mach-ocelot3
load-$(CONFIG_MOMENCO_OCELOT_3) += 0xffffffff80100000
#
+# Basler eXcite
+#
+core-$(CONFIG_BASLER_EXCITE) += arch/mips/basler/excite/
+cflags-$(CONFIG_BASLER_EXCITE) += -Iinclude/asm-mips/mach-excite
+load-$(CONFIG_BASLER_EXCITE) += 0x80100000
+
+#
# Momentum Jaguar ATX
#
core-$(CONFIG_MOMENCO_JAGUAR_ATX) += arch/mips/momentum/jaguar_atx/
@@ -395,18 +411,6 @@ load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0xffffffff80100000
core-$(CONFIG_DDB5XXX_COMMON) += arch/mips/ddb5xxx/common/
#
-# NEC DDB Vrc-5074
-#
-core-$(CONFIG_DDB5074) += arch/mips/ddb5xxx/ddb5074/
-load-$(CONFIG_DDB5074) += 0xffffffff80080000
-
-#
-# NEC DDB Vrc-5476
-#
-core-$(CONFIG_DDB5476) += arch/mips/ddb5xxx/ddb5476/
-load-$(CONFIG_DDB5476) += 0xffffffff80080000
-
-#
# NEC DDB Vrc-5477
#
core-$(CONFIG_DDB5477) += arch/mips/ddb5xxx/ddb5477/
@@ -468,6 +472,15 @@ libs-$(CONFIG_PNX8550_JBS) += arch/mips/philips/pnx8550/jbs/
#cflags-$(CONFIG_PNX8550_JBS) += -Iinclude/asm-mips/mach-pnx8550
load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000
+# NEC EMMA2RH boards
+#
+core-$(CONFIG_EMMA2RH) += arch/mips/emma2rh/common/
+cflags-$(CONFIG_EMMA2RH) += -Iinclude/asm-mips/mach-emma2rh
+
+# NEC EMMA2RH Mark-eins
+core-$(CONFIG_MARKEINS) += arch/mips/emma2rh/markeins/
+load-$(CONFIG_MARKEINS) += 0xffffffff88100000
+
#
# SGI IP22 (Indy/Indigo2)
#
diff --git a/arch/mips/au1000/common/au1xxx_irqmap.c b/arch/mips/au1000/common/au1xxx_irqmap.c
index 0b2c03c52319..5a1e3687cafa 100644
--- a/arch/mips/au1000/common/au1xxx_irqmap.c
+++ b/arch/mips/au1000/common/au1xxx_irqmap.c
@@ -55,7 +55,7 @@
* Careful if you change match 2 request!
* The interrupt handler is called directly from the low level dispatch code.
*/
-au1xxx_irq_map_t au1xxx_ic0_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_ic0_map[] = {
#if defined(CONFIG_SOC_AU1000)
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
@@ -220,5 +220,5 @@ au1xxx_irq_map_t au1xxx_ic0_map[] = {
};
-int au1xxx_ic0_nr_irqs = sizeof(au1xxx_ic0_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_ic0_nr_irqs = ARRAY_SIZE(au1xxx_ic0_map);
diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/au1000/common/pci.c
index 4e5a6e1a9a6e..b1392abac809 100644
--- a/arch/mips/au1000/common/pci.c
+++ b/arch/mips/au1000/common/pci.c
@@ -40,17 +40,17 @@
/* TBD */
static struct resource pci_io_resource = {
- "pci IO space",
- (u32)PCI_IO_START,
- (u32)PCI_IO_END,
- IORESOURCE_IO
+ .start = PCI_IO_START,
+ .end = PCI_IO_END,
+ .name = "PCI IO space",
+ .flags = IORESOURCE_IO
};
static struct resource pci_mem_resource = {
- "pci memory space",
- (u32)PCI_MEM_START,
- (u32)PCI_MEM_END,
- IORESOURCE_MEM
+ .start = PCI_MEM_START,
+ .end = PCI_MEM_END,
+ .name = "PCI memory space",
+ .flags = IORESOURCE_MEM
};
extern struct pci_ops au1x_pci_ops;
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index 307e98c29ddc..97165b6b3894 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -49,17 +49,13 @@ extern void __init board_setup(void);
extern void au1000_restart(char *);
extern void au1000_halt(void);
extern void au1000_power_off(void);
-extern struct resource ioport_resource;
-extern struct resource iomem_resource;
-extern void (*board_time_init)(void);
extern void au1x_time_init(void);
-extern void (*board_timer_setup)(struct irqaction *irq);
extern void au1x_timer_setup(struct irqaction *irq);
extern void au1xxx_time_init(void);
extern void au1xxx_timer_setup(struct irqaction *irq);
extern void set_cpuspec(void);
-void __init plat_setup(void)
+void __init plat_mem_setup(void)
{
struct cpu_spec *sp;
char *argptr;
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index f74d66a58a21..842e1b5ac4a1 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -50,10 +50,6 @@
#include <linux/mc146818rtc.h>
#include <linux/timex.h>
-extern void do_softirq(void);
-extern volatile unsigned long wall_jiffies;
-unsigned long missed_heart_beats = 0;
-
static unsigned long r4k_offset; /* Amount to increment compare reg each time */
static unsigned long r4k_cur; /* What counter should be at next timer irq */
int no_au1xxx_32khz;
@@ -388,10 +384,9 @@ static unsigned long do_fast_pm_gettimeoffset(void)
}
#endif
-void au1xxx_timer_setup(struct irqaction *irq)
+void __init au1xxx_timer_setup(struct irqaction *irq)
{
- unsigned int est_freq;
- extern unsigned long (*do_gettimeoffset)(void);
+ unsigned int est_freq;
printk("calculating r4koff... ");
r4k_offset = cal_r4koff();
diff --git a/arch/mips/au1000/csb250/irqmap.c b/arch/mips/au1000/csb250/irqmap.c
index 5cb1166be35c..57d60401905e 100644
--- a/arch/mips/au1000/csb250/irqmap.c
+++ b/arch/mips/au1000/csb250/irqmap.c
@@ -47,7 +47,7 @@
#include <asm/system.h>
#include <asm/au1000.h>
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
@@ -57,4 +57,4 @@ au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
};
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/au1000/db1x00/irqmap.c b/arch/mips/au1000/db1x00/irqmap.c
index f63024a9893a..0138c5b7c860 100644
--- a/arch/mips/au1000/db1x00/irqmap.c
+++ b/arch/mips/au1000/db1x00/irqmap.c
@@ -80,7 +80,7 @@ char irq_tab_alchemy[][5] __initdata = {
#endif
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
#ifndef CONFIG_MIPS_MIRAGE
#ifdef CONFIG_MIPS_DB1550
@@ -101,4 +101,4 @@ au1xxx_irq_map_t au1xxx_irq_map[] = {
};
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/au1000/hydrogen3/irqmap.c b/arch/mips/au1000/hydrogen3/irqmap.c
index 6eacaa0daa49..14e1ed37cf6b 100644
--- a/arch/mips/au1000/hydrogen3/irqmap.c
+++ b/arch/mips/au1000/hydrogen3/irqmap.c
@@ -47,10 +47,10 @@
#include <asm/system.h>
#include <asm/au1000.h>
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
/* { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, */
{ AU1000_GPIO_21, INTC_INT_LOW_LEVEL, 0 },
};
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/au1000/mtx-1/irqmap.c b/arch/mips/au1000/mtx-1/irqmap.c
index f9a0a8b9def2..4693a4eb2b82 100644
--- a/arch/mips/au1000/mtx-1/irqmap.c
+++ b/arch/mips/au1000/mtx-1/irqmap.c
@@ -58,7 +58,7 @@ char irq_tab_alchemy[][5] __initdata = {
[7] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
};
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
@@ -66,4 +66,4 @@ au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
};
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/au1000/pb1000/irqmap.c b/arch/mips/au1000/pb1000/irqmap.c
index a3c460e3c23e..156500ba467f 100644
--- a/arch/mips/au1000/pb1000/irqmap.c
+++ b/arch/mips/au1000/pb1000/irqmap.c
@@ -47,8 +47,8 @@
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 },
};
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/au1000/pb1100/irqmap.c b/arch/mips/au1000/pb1100/irqmap.c
index 43be7158b9ab..d986916221b7 100644
--- a/arch/mips/au1000/pb1100/irqmap.c
+++ b/arch/mips/au1000/pb1100/irqmap.c
@@ -47,11 +47,11 @@
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card Fully_Interted#
{ AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card STSCHG#
{ AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card IRQ#
{ AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, // DC_IRQ#
};
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c
index 59e70e5cf325..bacc0c6bfe67 100644
--- a/arch/mips/au1000/pb1200/irqmap.c
+++ b/arch/mips/au1000/pb1200/irqmap.c
@@ -55,11 +55,11 @@
#define PB1200_INT_END DB1200_INT_END
#endif
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
};
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
/*
* Support for External interrupts on the PbAu1200 Development platform.
diff --git a/arch/mips/au1000/pb1500/irqmap.c b/arch/mips/au1000/pb1500/irqmap.c
index 8cb76c2edb5e..409d1612bb63 100644
--- a/arch/mips/au1000/pb1500/irqmap.c
+++ b/arch/mips/au1000/pb1500/irqmap.c
@@ -52,7 +52,7 @@ char irq_tab_alchemy[][5] __initdata = {
[13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
};
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
@@ -60,4 +60,4 @@ au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
};
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/au1000/pb1550/irqmap.c b/arch/mips/au1000/pb1550/irqmap.c
index 47c7a1c19f4b..24a9d186cf5a 100644
--- a/arch/mips/au1000/pb1550/irqmap.c
+++ b/arch/mips/au1000/pb1550/irqmap.c
@@ -52,9 +52,9 @@ char irq_tab_alchemy[][5] __initdata = {
[13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
};
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
};
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/au1000/xxs1500/irqmap.c
index 52f2f7daeb05..3844c6429e27 100644
--- a/arch/mips/au1000/xxs1500/irqmap.c
+++ b/arch/mips/au1000/xxs1500/irqmap.c
@@ -47,7 +47,7 @@
#include <asm/system.h>
#include <asm/au1000.h>
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
@@ -63,4 +63,4 @@ au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 },
};
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile
new file mode 100644
index 000000000000..519142c2e4ef
--- /dev/null
+++ b/arch/mips/basler/excite/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for Basler eXcite
+#
+
+obj-$(CONFIG_BASLER_EXCITE) += excite_irq.o excite_prom.o excite_setup.o \
+ excite_device.o excite_procfs.o
+
+obj-$(CONFIG_KGDB) += excite_dbg_io.o
+obj-m += excite_iodev.o
diff --git a/arch/mips/basler/excite/excite_dbg_io.c b/arch/mips/basler/excite/excite_dbg_io.c
new file mode 100644
index 000000000000..83f6bddf578b
--- /dev/null
+++ b/arch/mips/basler/excite/excite_dbg_io.c
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2004 by Basler Vision Technologies AG
+ * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/gdb-stub.h>
+#include <asm/rm9k-ocd.h>
+#include <excite.h>
+
+#if defined(CONFIG_SERIAL_8250) && CONFIG_SERIAL_8250_NR_UARTS > 1
+#error Debug port used by serial driver
+#endif
+
+#define UART_CLK 25000000
+#define BASE_BAUD (UART_CLK / 16)
+#define REGISTER_BASE_0 0x0208UL
+#define REGISTER_BASE_1 0x0238UL
+
+#define REGISTER_BASE_DBG REGISTER_BASE_1
+
+#define CPRR 0x0004
+#define UACFG 0x0200
+#define UAINTS 0x0204
+#define UARBR (REGISTER_BASE_DBG + 0x0000)
+#define UATHR (REGISTER_BASE_DBG + 0x0004)
+#define UADLL (REGISTER_BASE_DBG + 0x0008)
+#define UAIER (REGISTER_BASE_DBG + 0x000c)
+#define UADLH (REGISTER_BASE_DBG + 0x0010)
+#define UAIIR (REGISTER_BASE_DBG + 0x0014)
+#define UAFCR (REGISTER_BASE_DBG + 0x0018)
+#define UALCR (REGISTER_BASE_DBG + 0x001c)
+#define UAMCR (REGISTER_BASE_DBG + 0x0020)
+#define UALSR (REGISTER_BASE_DBG + 0x0024)
+#define UAMSR (REGISTER_BASE_DBG + 0x0028)
+#define UASCR (REGISTER_BASE_DBG + 0x002c)
+
+#define PARITY_NONE 0
+#define PARITY_ODD 0x08
+#define PARITY_EVEN 0x18
+#define PARITY_MARK 0x28
+#define PARITY_SPACE 0x38
+
+#define DATA_5BIT 0x0
+#define DATA_6BIT 0x1
+#define DATA_7BIT 0x2
+#define DATA_8BIT 0x3
+
+#define STOP_1BIT 0x0
+#define STOP_2BIT 0x4
+
+#define BAUD_DBG 57600
+#define PARITY_DBG PARITY_NONE
+#define DATA_DBG DATA_8BIT
+#define STOP_DBG STOP_1BIT
+
+/* Initialize the serial port for KGDB debugging */
+void __init excite_kgdb_init(void)
+{
+ const u32 divisor = BASE_BAUD / BAUD_DBG;
+
+ /* Take the UART out of reset */
+ titan_writel(0x00ff1cff, CPRR);
+ titan_writel(0x00000000, UACFG);
+ titan_writel(0x00000002, UACFG);
+
+ titan_writel(0x0, UALCR);
+ titan_writel(0x0, UAIER);
+
+ /* Disable FIFOs */
+ titan_writel(0x00, UAFCR);
+
+ titan_writel(0x80, UALCR);
+ titan_writel(divisor & 0xff, UADLL);
+ titan_writel((divisor & 0xff00) >> 8, UADLH);
+ titan_writel(0x0, UALCR);
+
+ titan_writel(DATA_DBG | PARITY_DBG | STOP_DBG, UALCR);
+
+ /* Enable receiver interrupt */
+ titan_readl(UARBR);
+ titan_writel(0x1, UAIER);
+}
+
+int getDebugChar(void)
+{
+ while (!(titan_readl(UALSR) & 0x1));
+ return titan_readl(UARBR);
+}
+
+int putDebugChar(int data)
+{
+ while (!(titan_readl(UALSR) & 0x20));
+ titan_writel(data, UATHR);
+ return 1;
+}
+
+/* KGDB interrupt handler */
+asmlinkage void excite_kgdb_inthdl(struct pt_regs *regs)
+{
+ if (unlikely(
+ ((titan_readl(UAIIR) & 0x7) == 4)
+ && ((titan_readl(UARBR) & 0xff) == 0x3)))
+ set_async_breakpoint(&regs->cp0_epc);
+}
diff --git a/arch/mips/basler/excite/excite_device.c b/arch/mips/basler/excite/excite_device.c
new file mode 100644
index 000000000000..34ec76716fa0
--- /dev/null
+++ b/arch/mips/basler/excite/excite_device.c
@@ -0,0 +1,404 @@
+/*
+ * Copyright (C) 2004 by Basler Vision Technologies AG
+ * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <linux/err.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <asm/types.h>
+#include <asm/rm9k-ocd.h>
+
+#include <excite.h>
+#include <rm9k_eth.h>
+#include <rm9k_wdt.h>
+#include <rm9k_xicap.h>
+#include <excite_nandflash.h>
+
+#include "excite_iodev.h"
+
+#define RM9K_GE_UNIT 0
+#define XICAP_UNIT 0
+#define NAND_UNIT 0
+
+#define DLL_TIMEOUT 3 /* seconds */
+
+
+#define RINIT(__start__, __end__, __name__, __parent__) { \
+ .name = __name__ "_0", \
+ .start = (__start__), \
+ .end = (__end__), \
+ .flags = 0, \
+ .parent = (__parent__) \
+}
+
+#define RINIT_IRQ(__irq__, __name__) { \
+ .name = __name__ "_0", \
+ .start = (__irq__), \
+ .end = (__irq__), \
+ .flags = IORESOURCE_IRQ, \
+ .parent = NULL \
+}
+
+
+
+enum {
+ slice_xicap,
+ slice_eth
+};
+
+
+
+static struct resource
+ excite_ctr_resource = {
+ .name = "GPI counters",
+ .start = 0,
+ .end = 5,
+ .flags = 0,
+ .parent = NULL,
+ .sibling = NULL,
+ .child = NULL
+ },
+ excite_gpislice_resource = {
+ .name = "GPI slices",
+ .start = 0,
+ .end = 1,
+ .flags = 0,
+ .parent = NULL,
+ .sibling = NULL,
+ .child = NULL
+ },
+ excite_mdio_channel_resource = {
+ .name = "MDIO channels",
+ .start = 0,
+ .end = 1,
+ .flags = 0,
+ .parent = NULL,
+ .sibling = NULL,
+ .child = NULL
+ },
+ excite_fifomem_resource = {
+ .name = "FIFO memory",
+ .start = 0,
+ .end = 767,
+ .flags = 0,
+ .parent = NULL,
+ .sibling = NULL,
+ .child = NULL
+ },
+ excite_scram_resource = {
+ .name = "Scratch RAM",
+ .start = EXCITE_PHYS_SCRAM,
+ .end = EXCITE_PHYS_SCRAM + EXCITE_SIZE_SCRAM - 1,
+ .flags = IORESOURCE_MEM,
+ .parent = NULL,
+ .sibling = NULL,
+ .child = NULL
+ },
+ excite_fpga_resource = {
+ .name = "System FPGA",
+ .start = EXCITE_PHYS_FPGA,
+ .end = EXCITE_PHYS_FPGA + EXCITE_SIZE_FPGA - 1,
+ .flags = IORESOURCE_MEM,
+ .parent = NULL,
+ .sibling = NULL,
+ .child = NULL
+ },
+ excite_nand_resource = {
+ .name = "NAND flash control",
+ .start = EXCITE_PHYS_NAND,
+ .end = EXCITE_PHYS_NAND + EXCITE_SIZE_NAND - 1,
+ .flags = IORESOURCE_MEM,
+ .parent = NULL,
+ .sibling = NULL,
+ .child = NULL
+ },
+ excite_titan_resource = {
+ .name = "TITAN registers",
+ .start = EXCITE_PHYS_TITAN,
+ .end = EXCITE_PHYS_TITAN + EXCITE_SIZE_TITAN - 1,
+ .flags = IORESOURCE_MEM,
+ .parent = NULL,
+ .sibling = NULL,
+ .child = NULL
+ };
+
+
+
+static void adjust_resources(struct resource *res, unsigned int n)
+{
+ struct resource *p;
+ const unsigned long mask = IORESOURCE_IO | IORESOURCE_MEM
+ | IORESOURCE_IRQ | IORESOURCE_DMA;
+
+ for (p = res; p < res + n; p++) {
+ const struct resource * const parent = p->parent;
+ if (parent) {
+ p->start += parent->start;
+ p->end += parent->start;
+ p->flags = parent->flags & mask;
+ }
+ }
+}
+
+
+
+#if defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE)
+static struct resource xicap_rsrc[] = {
+ RINIT(0x4840, 0x486f, XICAP_RESOURCE_FIFO_RX, &excite_titan_resource),
+ RINIT(0x4940, 0x494b, XICAP_RESOURCE_FIFO_TX, &excite_titan_resource),
+ RINIT(0x5040, 0x5127, XICAP_RESOURCE_XDMA, &excite_titan_resource),
+ RINIT(0x1000, 0x112f, XICAP_RESOURCE_PKTPROC, &excite_titan_resource),
+ RINIT(0x1100, 0x110f, XICAP_RESOURCE_PKT_STREAM, &excite_fpga_resource),
+ RINIT(0x0800, 0x0bff, XICAP_RESOURCE_DMADESC, &excite_scram_resource),
+ RINIT(slice_xicap, slice_xicap, XICAP_RESOURCE_GPI_SLICE, &excite_gpislice_resource),
+ RINIT(0x0100, 0x02ff, XICAP_RESOURCE_FIFO_BLK, &excite_fifomem_resource),
+ RINIT_IRQ(TITAN_IRQ, XICAP_RESOURCE_IRQ)
+};
+
+static struct platform_device xicap_pdev = {
+ .name = XICAP_NAME,
+ .id = XICAP_UNIT,
+ .num_resources = ARRAY_SIZE(xicap_rsrc),
+ .resource = xicap_rsrc
+};
+
+/*
+ * Create a platform device for the GPI port that receives the
+ * image data from the embedded camera.
+ */
+static int __init xicap_devinit(void)
+{
+ unsigned long tend;
+ u32 reg;
+ int retval;
+
+ adjust_resources(xicap_rsrc, ARRAY_SIZE(xicap_rsrc));
+
+ /* Power up the slice and configure it. */
+ reg = titan_readl(CPTC1R);
+ reg &= ~(0x11100 << slice_xicap);
+ titan_writel(reg, CPTC1R);
+
+ /* Enable slice & DLL. */
+ reg= titan_readl(CPRR);
+ reg &= ~(0x00030003 << (slice_xicap * 2));
+ titan_writel(reg, CPRR);
+
+ /* Wait for DLLs to lock */
+ tend = jiffies + DLL_TIMEOUT * HZ;
+ while (time_before(jiffies, tend)) {
+ if (!(~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))))
+ break;
+ yield();
+ }
+
+ if (~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))) {
+ printk(KERN_ERR "%s: DLL not locked after %u seconds\n",
+ xicap_pdev.name, DLL_TIMEOUT);
+ retval = -ETIME;
+ } else {
+ /* Register platform device */
+ retval = platform_device_register(&xicap_pdev);
+ }
+
+ return retval;
+}
+
+device_initcall(xicap_devinit);
+#endif /* defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) */
+
+
+
+#if defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE)
+static struct resource wdt_rsrc[] = {
+ RINIT(0, 0, WDT_RESOURCE_COUNTER, &excite_ctr_resource),
+ RINIT(0x0084, 0x008f, WDT_RESOURCE_REGS, &excite_titan_resource),
+ RINIT_IRQ(TITAN_IRQ, WDT_RESOURCE_IRQ)
+};
+
+static struct platform_device wdt_pdev = {
+ .name = WDT_NAME,
+ .id = -1,
+ .num_resources = ARRAY_SIZE(wdt_rsrc),
+ .resource = wdt_rsrc
+};
+
+/*
+ * Create a platform device for the GPI port that receives the
+ * image data from the embedded camera.
+ */
+static int __init wdt_devinit(void)
+{
+ adjust_resources(wdt_rsrc, ARRAY_SIZE(wdt_rsrc));
+ return platform_device_register(&wdt_pdev);
+}
+
+device_initcall(wdt_devinit);
+#endif /* defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE) */
+
+
+
+static struct resource excite_nandflash_rsrc[] = {
+ RINIT(0x2000, 0x201f, EXCITE_NANDFLASH_RESOURCE_REGS, &excite_nand_resource)
+};
+
+static struct platform_device excite_nandflash_pdev = {
+ .name = "excite_nand",
+ .id = NAND_UNIT,
+ .num_resources = ARRAY_SIZE(excite_nandflash_rsrc),
+ .resource = excite_nandflash_rsrc
+};
+
+/*
+ * Create a platform device for the access to the nand-flash
+ * port
+ */
+static int __init excite_nandflash_devinit(void)
+{
+ adjust_resources(excite_nandflash_rsrc, ARRAY_SIZE(excite_nandflash_rsrc));
+
+ /* nothing to be done here */
+
+ /* Register platform device */
+ return platform_device_register(&excite_nandflash_pdev);
+}
+
+device_initcall(excite_nandflash_devinit);
+
+
+
+static struct resource iodev_rsrc[] = {
+ RINIT_IRQ(FPGA1_IRQ, IODEV_RESOURCE_IRQ)
+};
+
+static struct platform_device io_pdev = {
+ .name = IODEV_NAME,
+ .id = -1,
+ .num_resources = ARRAY_SIZE(iodev_rsrc),
+ .resource = iodev_rsrc
+};
+
+/*
+ * Create a platform device for the external I/O ports.
+ */
+static int __init io_devinit(void)
+{
+ adjust_resources(iodev_rsrc, ARRAY_SIZE(iodev_rsrc));
+ return platform_device_register(&io_pdev);
+}
+
+device_initcall(io_devinit);
+
+
+
+
+#if defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE)
+static struct resource rm9k_ge_rsrc[] = {
+ RINIT(0x2200, 0x27ff, RM9K_GE_RESOURCE_MAC, &excite_titan_resource),
+ RINIT(0x1800, 0x1fff, RM9K_GE_RESOURCE_MSTAT, &excite_titan_resource),
+ RINIT(0x2000, 0x212f, RM9K_GE_RESOURCE_PKTPROC, &excite_titan_resource),
+ RINIT(0x5140, 0x5227, RM9K_GE_RESOURCE_XDMA, &excite_titan_resource),
+ RINIT(0x4870, 0x489f, RM9K_GE_RESOURCE_FIFO_RX, &excite_titan_resource),
+ RINIT(0x494c, 0x4957, RM9K_GE_RESOURCE_FIFO_TX, &excite_titan_resource),
+ RINIT(0x0000, 0x007f, RM9K_GE_RESOURCE_FIFOMEM_RX, &excite_fifomem_resource),
+ RINIT(0x0080, 0x00ff, RM9K_GE_RESOURCE_FIFOMEM_TX, &excite_fifomem_resource),
+ RINIT(0x0180, 0x019f, RM9K_GE_RESOURCE_PHY, &excite_titan_resource),
+ RINIT(0x0000, 0x03ff, RM9K_GE_RESOURCE_DMADESC_RX, &excite_scram_resource),
+ RINIT(0x0400, 0x07ff, RM9K_GE_RESOURCE_DMADESC_TX, &excite_scram_resource),
+ RINIT(slice_eth, slice_eth, RM9K_GE_RESOURCE_GPI_SLICE, &excite_gpislice_resource),
+ RINIT(0, 0, RM9K_GE_RESOURCE_MDIO_CHANNEL, &excite_mdio_channel_resource),
+ RINIT_IRQ(TITAN_IRQ, RM9K_GE_RESOURCE_IRQ_MAIN),
+ RINIT_IRQ(PHY_IRQ, RM9K_GE_RESOURCE_IRQ_PHY)
+};
+
+static struct platform_device rm9k_ge_pdev = {
+ .name = RM9K_GE_NAME,
+ .id = RM9K_GE_UNIT,
+ .num_resources = ARRAY_SIZE(rm9k_ge_rsrc),
+ .resource = rm9k_ge_rsrc
+};
+
+
+
+/*
+ * Create a platform device for the Ethernet port.
+ */
+static int __init rm9k_ge_devinit(void)
+{
+ u32 reg;
+
+ adjust_resources(rm9k_ge_rsrc, ARRAY_SIZE(rm9k_ge_rsrc));
+
+ /* Power up the slice and configure it. */
+ reg = titan_readl(CPTC1R);
+ reg &= ~(0x11000 << slice_eth);
+ reg |= 0x100 << slice_eth;
+ titan_writel(reg, CPTC1R);
+
+ /* Take the MAC out of reset, reset the DLLs. */
+ reg = titan_readl(CPRR);
+ reg &= ~(0x00030000 << (slice_eth * 2));
+ reg |= 0x3 << (slice_eth * 2);
+ titan_writel(reg, CPRR);
+
+ return platform_device_register(&rm9k_ge_pdev);
+}
+
+device_initcall(rm9k_ge_devinit);
+#endif /* defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) */
+
+
+
+static int __init excite_setup_devs(void)
+{
+ int res;
+ u32 reg;
+
+ /* Enable xdma and fifo interrupts */
+ reg = titan_readl(0x0050);
+ titan_writel(reg | 0x18000000, 0x0050);
+
+ res = request_resource(&iomem_resource, &excite_titan_resource);
+ if (res)
+ return res;
+ res = request_resource(&iomem_resource, &excite_scram_resource);
+ if (res)
+ return res;
+ res = request_resource(&iomem_resource, &excite_fpga_resource);
+ if (res)
+ return res;
+ res = request_resource(&iomem_resource, &excite_nand_resource);
+ if (res)
+ return res;
+ excite_fpga_resource.flags = excite_fpga_resource.parent->flags &
+ ( IORESOURCE_IO | IORESOURCE_MEM
+ | IORESOURCE_IRQ | IORESOURCE_DMA);
+ excite_nand_resource.flags = excite_nand_resource.parent->flags &
+ ( IORESOURCE_IO | IORESOURCE_MEM
+ | IORESOURCE_IRQ | IORESOURCE_DMA);
+
+ return 0;
+}
+
+arch_initcall(excite_setup_devs);
+
diff --git a/arch/mips/basler/excite/excite_flashtest.c b/arch/mips/basler/excite/excite_flashtest.c
new file mode 100644
index 000000000000..f0024a8e3294
--- /dev/null
+++ b/arch/mips/basler/excite/excite_flashtest.c
@@ -0,0 +1,294 @@
+/*
+* Copyright (C) 2005 by Basler Vision Technologies AG
+* Author: Thies Moeller <thies.moeller@baslerweb.com>
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+
+#include <excite.h>
+
+#include <asm/io.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <asm/rm9k-ocd.h> // for ocd_write
+#include <linux/workqueue.h> // for queue
+
+#include "excite_nandflash.h"
+#include "nandflash.h"
+
+#define PFX "excite flashtest: "
+typedef void __iomem *io_reg_t;
+
+#define io_readb(__a__) __raw_readb((__a__))
+#define io_writeb(__v__, __a__) __raw_writeb((__v__), (__a__))
+
+
+
+static inline const struct resource *excite_nandflash_get_resource(
+ struct platform_device *d, unsigned long flags, const char *basename)
+{
+ const char fmt[] = "%s_%u";
+ char buf[80];
+
+ if (unlikely(snprintf(buf, sizeof buf, fmt, basename, d->id) >= sizeof buf))
+ return NULL;
+
+ return platform_get_resource_byname(d, flags, buf);
+}
+
+static inline io_reg_t
+excite_nandflash_map_regs(struct platform_device *d, const char *basename)
+{
+ void *result = NULL;
+ const struct resource *const r =
+ excite_nandflash_get_resource(d, IORESOURCE_MEM, basename);
+ if (r)
+ result = ioremap_nocache(r->start, r->end + 1 - r->start);
+ return result;
+}
+
+/* controller and mtd information */
+
+struct excite_nandflash_drvdata {
+ struct mtd_info board_mtd;
+ struct nand_chip board_chip;
+ io_reg_t regs;
+};
+
+
+/* command and control functions */
+static void excite_nandflash_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ struct nand_chip *this = mtd->priv;
+ io_reg_t regs = container_of(mtd,struct excite_nandflash_drvdata,board_mtd)->regs;
+
+ switch (cmd) {
+ /* Select the command latch */
+ case NAND_CTL_SETCLE: this->IO_ADDR_W = regs + EXCITE_NANDFLASH_CMD;
+ break;
+ /* Deselect the command latch */
+ case NAND_CTL_CLRCLE: this->IO_ADDR_W = regs + EXCITE_NANDFLASH_DATA;
+ break;
+ /* Select the address latch */
+ case NAND_CTL_SETALE: this->IO_ADDR_W = regs + EXCITE_NANDFLASH_ADDR;
+ break;
+ /* Deselect the address latch */
+ case NAND_CTL_CLRALE: this->IO_ADDR_W = regs + EXCITE_NANDFLASH_DATA;
+ break;
+ /* Select the chip -- not used */
+ case NAND_CTL_SETNCE:
+ break;
+ /* Deselect the chip -- not used */
+ case NAND_CTL_CLRNCE:
+ break;
+ }
+
+ this->IO_ADDR_R = this->IO_ADDR_W;
+}
+
+/* excite_nandflash_devready()
+ *
+ * returns 0 if the nand is busy, 1 if it is ready
+ */
+static int excite_nandflash_devready(struct mtd_info *mtd)
+{
+ struct excite_nandflash_drvdata *drvdata =
+ container_of(mtd, struct excite_nandflash_drvdata, board_mtd);
+
+ return io_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS);
+}
+
+/* device management functions */
+
+/* excite_nandflash_remove
+ *
+ * called by device layer to remove the driver
+ * the binding to the mtd and all allocated
+ * resources are released
+ */
+static int excite_nandflash_remove(struct device *dev)
+{
+ struct excite_nandflash_drvdata *this = dev_get_drvdata(dev);
+
+ pr_info(PFX "remove");
+
+ dev_set_drvdata(dev, NULL);
+
+ if (this == NULL) {
+ pr_debug(PFX "call remove without private data!!");
+ return 0;
+ }
+
+
+ /* free the common resources */
+ if (this->regs != NULL) {
+ iounmap(this->regs);
+ this->regs = NULL;
+ }
+
+ kfree(this);
+
+ return 0;
+}
+
+static int elapsed;
+
+void my_workqueue_handler(void *arg)
+{
+ elapsed = 1;
+}
+
+DECLARE_WORK(sigElapsed, my_workqueue_handler, 0);
+
+
+/* excite_nandflash_probe
+ *
+ * called by de