diff options
Diffstat (limited to 'Documentation/ABI')
19 files changed, 689 insertions, 142 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-selinux-disable b/Documentation/ABI/obsolete/sysfs-selinux-disable new file mode 100644 index 000000000000..c340278e3cf8 --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-selinux-disable @@ -0,0 +1,26 @@ +What: /sys/fs/selinux/disable +Date: April 2005 (predates git) +KernelVersion: 2.6.12-rc2 (predates git) +Contact: selinux@vger.kernel.org +Description: + + The selinuxfs "disable" node allows SELinux to be disabled at runtime + prior to a policy being loaded into the kernel. If disabled via this + mechanism, SELinux will remain disabled until the system is rebooted. + + The preferred method of disabling SELinux is via the "selinux=0" boot + parameter, but the selinuxfs "disable" node was created to make it + easier for systems with primitive bootloaders that did not allow for + easy modification of the kernel command line. Unfortunately, allowing + for SELinux to be disabled at runtime makes it difficult to secure the + kernel's LSM hooks using the "__ro_after_init" feature. + + Thankfully, the need for the SELinux runtime disable appears to be + gone, the default Kconfig configuration disables this selinuxfs node, + and only one of the major distributions, Fedora, supports disabling + SELinux at runtime. Fedora is in the process of removing the + selinuxfs "disable" node and once that is complete we will start the + slow process of removing this code from the kernel. + + More information on /sys/fs/selinux/disable can be found under the + CONFIG_SECURITY_SELINUX_DISABLE Kconfig option. diff --git a/Documentation/ABI/stable/sysfs-class-tpm b/Documentation/ABI/stable/sysfs-class-tpm index c0e23830f56a..58e94e7d55be 100644 --- a/Documentation/ABI/stable/sysfs-class-tpm +++ b/Documentation/ABI/stable/sysfs-class-tpm @@ -1,7 +1,7 @@ What: /sys/class/tpm/tpmX/device/ Date: April 2005 KernelVersion: 2.6.12 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The device/ directory under a specific TPM instance exposes the properties of that TPM chip @@ -9,7 +9,7 @@ Description: The device/ directory under a specific TPM instance exposes What: /sys/class/tpm/tpmX/device/active Date: April 2006 KernelVersion: 2.6.17 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "active" property prints a '1' if the TPM chip is accepting commands. An inactive TPM chip still contains all the state of an active chip (Storage Root Key, NVRAM, etc), and can be @@ -21,7 +21,7 @@ Description: The "active" property prints a '1' if the TPM chip is accepting What: /sys/class/tpm/tpmX/device/cancel Date: June 2005 KernelVersion: 2.6.13 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "cancel" property allows you to cancel the currently pending TPM command. Writing any value to cancel will call the TPM vendor specific cancel operation. @@ -29,7 +29,7 @@ Description: The "cancel" property allows you to cancel the currently What: /sys/class/tpm/tpmX/device/caps Date: April 2005 KernelVersion: 2.6.12 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "caps" property contains TPM manufacturer and version info. Example output: @@ -46,7 +46,7 @@ Description: The "caps" property contains TPM manufacturer and version info. What: /sys/class/tpm/tpmX/device/durations Date: March 2011 KernelVersion: 3.1 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "durations" property shows the 3 vendor-specific values used to wait for a short, medium and long TPM command. All TPM commands are categorized as short, medium or long in @@ -69,7 +69,7 @@ Description: The "durations" property shows the 3 vendor-specific values What: /sys/class/tpm/tpmX/device/enabled Date: April 2006 KernelVersion: 2.6.17 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "enabled" property prints a '1' if the TPM chip is enabled, meaning that it should be visible to the OS. This property may be visible but produce a '0' after some operation that @@ -78,7 +78,7 @@ Description: The "enabled" property prints a '1' if the TPM chip is enabled, What: /sys/class/tpm/tpmX/device/owned Date: April 2006 KernelVersion: 2.6.17 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "owned" property produces a '1' if the TPM_TakeOwnership ordinal has been executed successfully in the chip. A '0' indicates that ownership hasn't been taken. @@ -86,7 +86,7 @@ Description: The "owned" property produces a '1' if the TPM_TakeOwnership What: /sys/class/tpm/tpmX/device/pcrs Date: April 2005 KernelVersion: 2.6.12 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "pcrs" property will dump the current value of all Platform Configuration Registers in the TPM. Note that since these values may be constantly changing, the output is only valid @@ -109,7 +109,7 @@ Description: The "pcrs" property will dump the current value of all Platform What: /sys/class/tpm/tpmX/device/pubek Date: April 2005 KernelVersion: 2.6.12 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "pubek" property will return the TPM's public endorsement key if possible. If the TPM has had ownership established and is version 1.2, the pubek will not be available without the @@ -161,7 +161,7 @@ Description: The "pubek" property will return the TPM's public endorsement What: /sys/class/tpm/tpmX/device/temp_deactivated Date: April 2006 KernelVersion: 2.6.17 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "temp_deactivated" property returns a '1' if the chip has been temporarily deactivated, usually until the next power cycle. Whether a warm boot (reboot) will clear a TPM chip @@ -170,7 +170,7 @@ Description: The "temp_deactivated" property returns a '1' if the chip has What: /sys/class/tpm/tpmX/device/timeouts Date: March 2011 KernelVersion: 3.1 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "timeouts" property shows the 4 vendor-specific values for the TPM's interface spec timeouts. The use of these timeouts is defined by the TPM interface spec that the chip @@ -183,3 +183,14 @@ Description: The "timeouts" property shows the 4 vendor-specific values The four timeout values are shown in usecs, with a trailing "[original]" or "[adjusted]" depending on whether the values were scaled by the driver to be reported in usec from msecs. + +What: /sys/class/tpm/tpmX/tpm_version_major +Date: October 2019 +KernelVersion: 5.5 +Contact: linux-integrity@vger.kernel.org +Description: The "tpm_version_major" property shows the TCG spec major version + implemented by the TPM device. + + Example output: + + 2 diff --git a/Documentation/ABI/stable/sysfs-driver-dma-idxd b/Documentation/ABI/stable/sysfs-driver-dma-idxd new file mode 100644 index 000000000000..f4be46cc6cb6 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-driver-dma-idxd @@ -0,0 +1,171 @@ +What: sys/bus/dsa/devices/dsa<m>/cdev_major +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The major number that the character device driver assigned to + this device. + +What: sys/bus/dsa/devices/dsa<m>/errors +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The error information for this device. + +What: sys/bus/dsa/devices/dsa<m>/max_batch_size +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The largest number of work descriptors in a batch. + +What: sys/bus/dsa/devices/dsa<m>/max_work_queues_size +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The maximum work queue size supported by this device. + +What: sys/bus/dsa/devices/dsa<m>/max_engines +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The maximum number of engines supported by this device. + +What: sys/bus/dsa/devices/dsa<m>/max_groups +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The maximum number of groups can be created under this device. + +What: sys/bus/dsa/devices/dsa<m>/max_tokens +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The total number of bandwidth tokens supported by this device. + The bandwidth tokens represent resources within the DSA + implementation, and these resources are allocated by engines to + support operations. + +What: sys/bus/dsa/devices/dsa<m>/max_transfer_size +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The number of bytes to be read from the source address to + perform the operation. The maximum transfer size is dependent on + the workqueue the descriptor was submitted to. + +What: sys/bus/dsa/devices/dsa<m>/max_work_queues +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The maximum work queue number that this device supports. + +What: sys/bus/dsa/devices/dsa<m>/numa_node +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The numa node number for this device. + +What: sys/bus/dsa/devices/dsa<m>/op_cap +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The operation capability bit mask specify the operation types + supported by the this device. + +What: sys/bus/dsa/devices/dsa<m>/state +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The state information of this device. It can be either enabled + or disabled. + +What: sys/bus/dsa/devices/dsa<m>/group<m>.<n> +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The assigned group under this device. + +What: sys/bus/dsa/devices/dsa<m>/engine<m>.<n> +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The assigned engine under this device. + +What: sys/bus/dsa/devices/dsa<m>/wq<m>.<n> +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The assigned work queue under this device. + +What: sys/bus/dsa/devices/dsa<m>/configurable +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: To indicate if this device is configurable or not. + +What: sys/bus/dsa/devices/dsa<m>/token_limit +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The maximum number of bandwidth tokens that may be in use at + one time by operations that access low bandwidth memory in the + device. + +What: sys/bus/dsa/devices/wq<m>.<n>/group_id +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The group id that this work queue belongs to. + +What: sys/bus/dsa/devices/wq<m>.<n>/size +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The work queue size for this work queue. + +What: sys/bus/dsa/devices/wq<m>.<n>/type +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The type of this work queue, it can be "kernel" type for work + queue usages in the kernel space or "user" type for work queue + usages by applications in user space. + +What: sys/bus/dsa/devices/wq<m>.<n>/cdev_minor +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The minor number assigned to this work queue by the character + device driver. + +What: sys/bus/dsa/devices/wq<m>.<n>/mode +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The work queue mode type for this work queue. + +What: sys/bus/dsa/devices/wq<m>.<n>/priority +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The priority value of this work queue, it is a vlue relative to + other work queue in the same group to control quality of service + for dispatching work from multiple workqueues in the same group. + +What: sys/bus/dsa/devices/wq<m>.<n>/state +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The current state of the work queue. + +What: sys/bus/dsa/devices/wq<m>.<n>/threshold +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The number of entries in this work queue that may be filled + via a limited portal. + +What: sys/bus/dsa/devices/engine<m>.<n>/group_id +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The group that this engine belongs to. diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io index 05601a90a9b6..b0d90cc696a8 100644 --- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io +++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io @@ -1,5 +1,4 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health - Date: June 2018 KernelVersion: 4.19 Contact: Vadim Pasternak <vadimpmellanox.com> @@ -19,7 +18,6 @@ Description: These files show with which CPLD versions have been burned The files are read only. What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir - Date: December 2018 KernelVersion: 5.0 Contact: Vadim Pasternak <vadimpmellanox.com> @@ -30,7 +28,6 @@ Description: This file shows the system fans direction: The files are read only. What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version - Date: November 2018 KernelVersion: 5.0 Contact: Vadim Pasternak <vadimpmellanox.com> @@ -40,7 +37,6 @@ Description: These files show with which CPLD versions have been burned The files are read only. What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable - Date: November 2018 KernelVersion: 5.0 Contact: Vadim Pasternak <vadimpmellanox.com> @@ -108,7 +104,6 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_pwr_fail What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_comex What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail - Date: November 2018 KernelVersion: 5.0 Contact: Vadim Pasternak <vadimpmellanox.com> @@ -130,6 +125,12 @@ Description: These files show with which CPLD versions have been burned The files are read only. +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd Date: June 2019 KernelVersion: 5.3 Contact: Vadim Pasternak <vadimpmellanox.com> @@ -143,9 +144,65 @@ Description: These files show the system reset cause, as following: The files are read only. -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1 +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2 +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show system static topology identification + like system's static I2C topology, number and type of FPGA + devices within the system and so on. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_pwr_fail +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_platform +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show the system reset causes, as following: reset + due to AC power failure, reset invoked from software by + assertion reset signal through CPLD. reset caused by signal + asserted by SOC through ACPI register, reset invoked from + software by assertion power off signal through CPLD. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: This file allows to retain ASIC up during PCIe root complex + reset, when attribute is set 1. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: This file allows to overwrite system VPD hardware wrtie + protection when attribute is set 1. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: This file exposes the configuration update status of burnable + voltage regulator devices. The status values are as following: + 0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress. + + The file is read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: This file exposes the firmware version of burnable voltage + regulator devices. + + The file is read only. diff --git a/Documentation/ABI/testing/configfs-usb-gadget b/Documentation/ABI/testing/configfs-usb-gadget index 95a36589a66b..4594cc2435e8 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget +++ b/Documentation/ABI/testing/configfs-usb-gadget @@ -16,6 +16,10 @@ Description: write UDC's name found in /sys/class/udc/* to bind a gadget, empty string "" to unbind. + max_speed - maximum speed the driver supports. Valid + names are super-speed-plus, super-speed, + high-speed, full-speed, and low-speed. + bDeviceClass - USB device class code bDeviceSubClass - USB device subclass code bDeviceProtocol - USB device protocol code diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy index 29aaedf33246..cd572912c593 100644 --- a/Documentation/ABI/testing/ima_policy +++ b/Documentation/ABI/testing/ima_policy @@ -25,11 +25,11 @@ Description: lsm: [[subj_user=] [subj_role=] [subj_type=] [obj_user=] [obj_role=] [obj_type=]] option: [[appraise_type=]] [template=] [permit_directio] - [appraise_flag=] + [appraise_flag=] [keyrings=] base: func:= [BPRM_CHECK][MMAP_CHECK][CREDS_CHECK][FILE_CHECK][MODULE_CHECK] [FIRMWARE_CHECK] [KEXEC_KERNEL_CHECK] [KEXEC_INITRAMFS_CHECK] - [KEXEC_CMDLINE] + [KEXEC_CMDLINE] [KEY_CHECK] mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND] [[^]MAY_EXEC] fsmagic:= hex value @@ -42,6 +42,9 @@ Description: appraise_flag:= [check_blacklist] Currently, blacklist check is only for files signed with appended signature. + keyrings:= list of keyrings + (eg, .builtin_trusted_keys|.ima). Only valid + when action is "measure" and func is KEY_CHECK. template:= name of a defined IMA template type (eg, ima-ng). Only valid when action is "measure". pcr:= decimal value @@ -113,3 +116,12 @@ Description: Example of appraise rule allowing modsig appended signatures: appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig|modsig + + Example of measure rule using KEY_CHECK to measure all keys: + + measure func=KEY_CHECK + + Example of measure rule using KEY_CHECK to only measure + keys added to .builtin_trusted_keys or .ima keyring: + + measure func=KEY_CHECK keyrings=.builtin_trusted_keys|.ima diff --git a/Documentation/ABI/testing/rtc-cdev b/Documentation/ABI/testing/rtc-cdev index 97447283f13b..25910c3c3d7e 100644 --- a/Documentation/ABI/testing/rtc-cdev +++ b/Documentation/ABI/testing/rtc-cdev @@ -33,6 +33,14 @@ Description: Requires a separate RTC_PIE_ON call to enable the periodic interrupts. + * RTC_VL_READ: Read the voltage inputs status of the RTC when + supported. The value is a bit field of RTC_VL_*, giving the + status of the main and backup voltages. + + * RTC_VL_CLEAR: Clear the voltage status of the RTC. Some RTCs + need user interaction when the backup power provider is + replaced or charged to be able to clear the status. + The ioctl() calls supported by the older /dev/rtc interface are also supported by the newer RTC class framework. However, because the chips and systems are not standardized, some PC/AT diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index faaa2166d741..d3e53a6d8331 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -1726,3 +1726,16 @@ Contact: linux-iio@vger.kernel.org Description: List of valid periods (in seconds) for which the light intensity must be above the threshold level before interrupt is asserted. + +What: /sys/bus/iio/devices/iio:deviceX/in_filter_notch_center_frequency +KernelVersion: 5.5 +Contact: linux-iio@vger.kernel.org +Description: + Center frequency in Hz for a notch filter. Used i.e. for line + noise suppression. + +What: /sys/bus/iio/devices/iio:deviceX/in_temp_thermocouple_type +KernelVersion: 5.5 +Contact: linux-iio@vger.kernel.org +Description: + One of the following thermocouple types: B, E, J, K, N, R, S, T. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-dma-buffer b/Documentation/ABI/testing/sysfs-bus-iio-dma-buffer new file mode 100644 index 000000000000..d526e6571001 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-dma-buffer @@ -0,0 +1,19 @@ +What: /sys/bus/iio/devices/iio:deviceX/buffer/length_align_bytes +KernelVersion: 5.4 +Contact: linux-iio@vger.kernel.org +Description: + DMA buffers tend to have a alignment requirement for the + buffers. If this alignment requirement is not met samples might + be dropped from the buffer. + + This property reports the alignment requirements in bytes. + This means that the buffer size in bytes needs to be a integer + multiple of the number reported by this file. + + The alignment requirements in number of sample sets will depend + on the enabled channels and the bytes per channel. This means + that the alignment requirement in samples sets might change + depending on which and how many channels are enabled. Whereas + the alignment requirement reported in bytes by this property + will remain static and does not depend on which channels are + enabled. diff --git a/Documentation/ABI/testing/sysfs-bus-mdio b/Documentation/ABI/testing/sysfs-bus-mdio new file mode 100644 index 000000000000..da86efc7781b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-mdio @@ -0,0 +1,63 @@ +What: /sys/bus/mdio_bus/devices/.../statistics/ +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + This folder contains statistics about global and per + MDIO bus address statistics. + +What: /sys/bus/mdio_bus/devices/.../statistics/transfers +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of transfers for this MDIO bus. + +What: /sys/bus/mdio_bus/devices/.../statistics/errors +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of transfer errors for this MDIO bus. + +What: /sys/bus/mdio_bus/devices/.../statistics/writes +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of write transactions for this MDIO bus. + +What: /sys/bus/mdio_bus/devices/.../statistics/reads +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of read transactions for this MDIO bus. + +What: /sys/bus/mdio_bus/devices/.../statistics/transfers_<addr> +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of transfers for this MDIO bus address. + +What: /sys/bus/mdio_bus/devices/.../statistics/errors_<addr> +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of transfer errors for this MDIO bus address. + +What: /sys/bus/mdio_bus/devices/.../statistics/writes_<addr> +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of write transactions for this MDIO bus address. + +What: /sys/bus/mdio_bus/devices/.../statistics/reads_<addr> +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of read transactions for this MDIO bus address. diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq index 01196e19afca..9758eb85ade3 100644 --- a/Documentation/ABI/testing/sysfs-class-devfreq +++ b/Documentation/ABI/testing/sysfs-class-devfreq @@ -7,6 +7,13 @@ Description: The name of devfreq object denoted as ... is same as the name of device using devfreq. +What: /sys/class/devfreq/.../name +Date: November 2019 +Contact: Chanwoo Choi <cw00.choi@samsung.com> +Description: + The /sys/class/devfreq/.../name shows the name of device + of the corresponding devfreq object. + What: /sys/class/devfreq/.../governor Date: September 2011 Contact: MyungJoo Ham <myungjoo.ham@samsung.com> @@ -48,12 +55,15 @@ What: /sys/class/devfreq/.../trans_stat Date: October 2012 Contact: MyungJoo Ham <myungjoo.ham@samsung.com> Description: - This ABI shows the statistics of devfreq behavior on a - specific device. It shows the time spent in each state and - the number of transitions between states. + This ABI shows or clears the statistics of devfreq behavior + on a specific device. It shows the time spent in each state + and the number of transitions between states. In order to activate this ABI, the devfreq target device driver should provide the list of available frequencies - with its profile. + with its profile. If need to reset the statistics of devfreq + behavior on a specific device, enter 0(zero) to 'trans_stat' + as following: + echo 0 > /sys/class/devfreq/.../trans_stat What: /sys/class/devfreq/.../userspace/set_freq Date: September 2011 diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power index 27edc06e2495..bf3b48f022dc 100644 --- a/Documentation/ABI/testing/sysfs-class-power +++ b/Documentation/ABI/testing/sysfs-class-power @@ -189,7 +189,8 @@ Description: Access: Read Valid values: "Unknown", "Good", "Overheat", "Dead", "Over voltage", "Unspecified failure", "Cold", - "Watchdog timer expire", "Safety timer expire" + "Watchdog timer expire", "Safety timer expire", + "Over current" What: /sys/class/power_supply/<supply_name>/precharge_current Date: June 2017 diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index fc20cde63d1e..2e0e3b45d02a 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -196,6 +196,12 @@ Description: does not reflect it. Likewise, if one enables a deep state but a lighter state still is disabled, then this has no effect. +What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/default_status +Date: December 2019 +KernelVersion: v5.6 +Contact: Linux power management list <linux-pm@vger.kernel.org> +Description: + (RO) The default status of this state, "enabled" or "disabled". What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/residency Date: March 2014 diff --git a/Documentation/ABI/testing/sysfs-driver-pciback b/Documentation/ABI/testing/sysfs-driver-pciback index 6a733bfa37e6..73308c2b81b0 100644 --- a/Documentation/ABI/testing/sysfs-driver-pciback +++ b/Documentation/ABI/testing/sysfs-driver-pciback @@ -11,3 +11,16 @@ Description: #echo 00:19.0-E0:2:FF > /sys/bus/pci/drivers/pciback/quirks will allow the guest to read and write to the configuration register 0x0E. + +What: /sys/bus/pci/drivers/pciback/allow_interrupt_control +Date: Jan 2020 +KernelVersion: 5.6 +Contact: xen-devel@lists.xenproject.org +Description: + List of devices which can have interrupt control flag (INTx, + MSI, MSI-X) set by a connected guest. It is meant to be set + only when the guest is a stubdomain hosting device model (qemu) + and the actual device is assigned to a HVM. It is not safe + (similar to permissive attribute) to set for a devices assigned + to a PV guest. The device is automatically removed from this + list when the connected pcifront terminates. diff --git a/Documentation/ABI/testing/sysfs-driver-xen-blkback b/Documentation/ABI/testing/sysfs-driver-xen-blkback index 4e7babb3ba1f..ecb7942ff146 100644 --- a/Documentation/ABI/testing/sysfs-driver-xen-blkback +++ b/Documentation/ABI/testing/sysfs-driver-xen-blkback @@ -25,3 +25,13 @@ Description: allocated without being in use. The time is in seconds, 0 means indefinitely long. The default is 60 seconds. + +What: /sys/module/xen_blkback/parameters/buffer_squeeze_duration_ms +Date: December 2019 +KernelVersion: 5.6 +Contact: SeongJae Park <sjpark@amazon.de> +Description: + When memory pressure is reported to blkback this option + controls the duration in milliseconds that blkback will not + cache any page not backed by a grant mapping. + The default is 10ms. diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index aedeae1e8ec1..1a6cd5397129 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -1,37 +1,40 @@ What: /sys/fs/f2fs/<disk>/gc_max_sleep_time Date: July 2013 Contact: "Namjae Jeon" <namjae.jeon@samsung.com> -Description: - Controls the maximun sleep time for gc_thread. Time - is in milliseconds. +Description: Controls the maximum sleep time for gc_thread. Time + is in milliseconds. What: /sys/fs/f2fs/<disk>/gc_min_sleep_time Date: July 2013 Contact: "Namjae Jeon" <namjae.jeon@samsung.com> -Description: - Controls the minimum sleep time for gc_thread. Time - is in milliseconds. +Description: Controls the minimum sleep time for gc_thread. Time + is in milliseconds. What: /sys/fs/f2fs/<disk>/gc_no_gc_sleep_time Date: July 2013 Contact: "Namjae Jeon" <namjae.jeon@samsung.com> -Description: - Controls the default sleep time for gc_thread. Time - is in milliseconds. +Description: Controls the default sleep time for gc_thread. Time + is in milliseconds. What: /sys/fs/f2fs/<disk>/gc_idle Date: July 2013 Contact: "Namjae Jeon" <namjae.jeon@samsung.com> -Description: - Controls the victim selection policy for garbage collection. +Description: Controls the victim selection policy for garbage collection. + Setting gc_idle = 0(default) will disable this option. Setting + gc_idle = 1 will select the Cost Benefit approach & setting + gc_idle = 2 will select the greedy approach. What: /sys/fs/f2fs/<disk>/reclaim_segments Date: October 2013 Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> -Description: - Controls the issue rate of segment discard commands. - -What: /sys/fs/f2fs/<disk>/max_blkaddr +Description: This parameter controls the number of prefree segments to be + reclaimed. If the number of prefree segments is larger than + the number of segments in the proportion to the percentage + over total volume size, f2fs tries to conduct checkpoint to + reclaim the prefree segments to free segments. + By default, 5% over total # of segments. + +What: /sys/fs/f2fs/<disk>/main_blkaddr Date: November 2019 Contact: "Ramon Pantin" <pantin@google.com> Description: @@ -40,227 +43,278 @@ Description: What: /sys/fs/f2fs/<disk>/ipu_policy Date: November 2013 Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> -Description: - Controls the in-place-update policy. +Description: Controls the in-place-update policy. + updates in f2fs. User can set: + 0x01: F2FS_IPU_FORCE, 0x02: F2FS_IPU_SSR, + 0x04: F2FS_IPU_UTIL, 0x08: F2FS_IPU_SSR_UTIL, + 0x10: F2FS_IPU_FSYNC, 0x20: F2FS_IPU_ASYNC, + 0x40: F2FS_IPU_NOCACHE. + Refer segment.h for details. What: /sys/fs/f2fs/<disk>/min_ipu_util Date: November 2013 Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> -Description: - Controls the FS utilization condition for the in-place-update - policies. +Description: Controls the FS utilization condition for the in-place-update + policies. It is used by F2FS_IPU_UTIL and F2FS_IPU_SSR_UTIL policies. What: /sys/fs/f2fs/<disk>/min_fsync_blocks Date: September 2014 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Controls the dirty page count condition for the in-place-update - policies. +Description: Controls the dirty page count condition for the in-place-update + policies. What: /sys/fs/f2fs/<disk>/min_seq_blocks Date: August 2018 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Controls the dirty page count condition for batched sequential - writes in ->writepages. - +Description: Controls the dirty page count condition for batched sequential + writes in writepages. What: /sys/fs/f2fs/<disk>/min_hot_blocks Date: March 2017 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Controls the dirty page count condition for redefining hot data. +Description: Controls the dirty page count condition for redefining hot data. What: /sys/fs/f2fs/<disk>/min_ssr_sections Date: October 2017 Contact: "Chao Yu" <yuchao0@huawei.com> -Description: - Controls the fee section threshold to trigger SSR allocation. +Description: Controls the free section threshold to trigger SSR allocation. + If this is large, SSR mode will be enabled early. What: /sys/fs/f2fs/<disk>/max_small_discards Date: November 2013 Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> -Description: - Controls the issue rate of small discard commands. +Description: Controls the issue rate of discard commands that consist of small + blocks less than 2MB. The candidates to be discarded are cached until + checkpoint is triggered, and issued during the checkpoint. + By default, it is disabled with 0. -What: /sys/fs/f2fs/<disk>/discard_granularity -Date: July 2017 -Contact: "Chao Yu" <yuchao0@huawei.com> -Description: - Controls discard granularity of inner discard thread, inner thread +What: /sys/fs/f2fs/<disk>/discard_granularity +Date: July 2017 +Contact: "Chao Yu" <yuchao0@huawei.com> +Description: Controls discard granularity of inner discard thread. Inner thread will not issue discards with size that is smaller than granularity. - The unit size is one block, now only support configuring in range - of [1, 512]. + The unit size is one block(4KB), now only support configuring + in range of [1, 512]. Default value is 4(=16KB). -What: /sys/fs/f2fs/<disk>/umount_discard_timeout -Date: January 2019 -Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Set timeout to issue discard commands during umount. - Default: 5 secs +What: /sys/fs/f2fs/<disk>/umount_discard_timeout +Date: January 2019 +Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> +Description: Set timeout to issue discard commands during umount. + Default: 5 secs What: /sys/fs/f2fs/<disk>/max_victim_search Date: January 2014 Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> -Description: - Controls the number of trials to find a victim segment. +Description: Controls the number of trials to find a victim segment + when conducting SSR and cleaning operations. The default value + is 4096 which covers 8GB block address range. What: /sys/fs/f2fs/<disk>/migration_granularity Date: October 2018 Contact: "Chao Yu" <yuchao0@huawei.com> -Description: - Controls migration granularity of garbage collection on large - section, it can let GC move partial segment{s} of one section - in one GC cycle, so that dispersing heavy overhead GC to - multiple lightweight one. +Description: Controls migration granularity of garbage collection on large + section, it can let GC move partial segment{s} of one section + in one GC cycle, so that dispersing heavy overhead GC to + multiple lightweight one. What: /sys/fs/f2fs/<disk>/dir_level Date: March 2014 Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> -Description: - Controls the directory level for large directory. +Description: Controls the directory level for large directory. If a + directory has a number of files, it can reduce the file lookup + latency by increasing this dir_level value. Otherwise, it + needs to decrease this value to reduce the space overhead. + The default value is 0. What: /sys/fs/f2fs/<disk>/ram_thresh Date: March 2014 Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> -Description: - Controls the memory footprint used by f2fs. +Description: Controls the memory footprint used by free nids and cached + nat entries. By default, 1 is set, which indicates + 10 MB / 1 GB RAM. What: /sys/fs/f2fs/<disk>/batched_trim_sections Date: February 2015 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Controls the trimming rate in batch mode. - <deprecated> +Description: Controls the trimming rate in batch mode. + <deprecated> What: /sys/fs/f2fs/<disk>/cp_interval Date: October 2015 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Controls the checkpoint timing. +Description: Controls the checkpoint timing, set to 60 seconds by default. What: /sys/fs/f2fs/<disk>/idle_interval Date: January 2016 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Controls the idle timing for all paths other than - discard and gc path. +Description: Controls the idle timing of system, if there is no FS operation + during given interval. + Set to 5 seconds by default. What: /sys/fs/f2fs/<disk>/discard_idle_interval Date: September 2018 Contact: "Chao Yu" <yuchao0@huawei.com> Contact: "Sahitya Tummala" <stummala@codeaurora.org> -Description: - Controls the idle timing for discard path. +Description: Controls the idle timing of discard thread given + this time interval. + Default is 5 secs. What: /sys/fs/f2fs/<disk>/gc_idle_interval Date: September 2018 Contact: "Chao Yu" <yuchao0@huawei.com> Contact: "Sahitya Tummala" <stummala@codeaurora.org> -Description: - Controls the idle timing for gc path. +Description: Controls the idle timing for gc path. Set to 5 seconds by default. What: /sys/fs/f2fs/<disk>/iostat_enable Date: August 2017 Contact: "Chao Yu" <yuchao0@huawei.com> -Description: - Controls to enable/disable IO stat. +Description: Controls to enable/disable IO stat. What: /sys/fs/f2fs/<disk>/ra_nid_pages Date: October 2015 Contact: "Chao Yu" <chao2.yu@samsung.com> -Description: - Controls the count of nid pages to be readaheaded. +Description: Controls the count of nid pages to be readaheaded. + When building free nids, F2FS reads NAT blocks ahead for + speed up. Default is 0. What: /sys/fs/f2fs/<disk>/dirty_nats_ratio Date: January 2016 Contact: "Chao Yu" <chao2.yu@samsung.com> -Description: - Controls dirty nat entries ratio threshold, if current - ratio exceeds configured threshold, checkpoint will - be triggered for flushing dirty nat entries. +Description: Controls dirty nat entries ratio threshold, if current + ratio exceeds configured threshold, checkpoint will + be triggered for flushing dirty nat entries. What: /sys/fs/f2fs/<disk>/lifetime_write_kbytes Date: January 2016 Contact: "Shuoran Liu" <liushuoran@huawei.com> -Description: - Shows total written kbytes issued to disk. +Description: Shows total written kbytes issued to disk. What: /sys/fs/f2fs/<disk>/features Date: July 2017 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Shows all enabled features in current device. +Description: Shows all enabled features in current device. What: /sys/fs/f2fs/<disk>/inject_rate Date: May 2016 Contact: "Sheng Yong" <shengyong1@huawei.com> -Description: - Controls the injection rate. +Description: Controls the injection rate of arbitrary faults. What: /sys/fs/f2fs/<disk>/inject_type Date: May 2016 Contact: "Sheng Yong" <shengyong1@huawei.com> -Description: - Controls the injection type. +Description: Controls the injection type of arbitrary faults. + +What: /sys/fs/f2fs/<disk>/dirty_segments +Date: October 2017 +Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> +Description: Shows the number of dirty segments. What: /sys/fs/f2fs/<disk>/reserved_blocks Date: June 2017 Contact: "Chao Yu" <yuchao0@huawei.com> -Description: - Controls target reserved blocks in system, the threshold - is soft, it could exceed current available user space. +Description: Controls target reserved blocks in system, the threshold + is soft, it could exceed current available user space. What: /sys/fs/f2fs/<disk>/current_reserved_blocks Date: October 2017 Contact: "Yunlong Song" <yunlong.song@huawei.com> Contact: "Chao Yu" <yuchao0@huawei.com> -Description: - Shows current reserved blocks in system, it may be temporarily - smaller than target_reserved_blocks, but will gradually - increase to target_reserved_blocks when more free blocks are - freed by user later. +Description: Shows current reserved blocks in system, it may be temporarily + smaller than target_reserved_blocks, but will gradually + increase to target_reserved_blocks when more free blocks are + freed by user later. What: /sys/fs/f2fs/<disk>/gc_urgent Date: August 2017 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Do background GC agressively +Description: Do background GC agressively when set. When gc_urgent = 1, + background thread starts to do GC by given gc_urgent_sleep_time + interval. It is set to 0 by default. What: /sys/fs/f2fs/<disk>/gc_urgent_sleep_time Date: August 2017 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: - Controls sleep time of GC urgent mode +Description: Controls sleep time of GC urgent mode. Set to 500ms by default. What: /sys/fs/f2fs/<disk>/readdir_ra Date: November 2017 Contact: "Sheng Yong" <shengyong1@huawei.com> -Description: - Controls readahead inode block in readdir. +Description: Controls readahead inode block in readdir. Enabled by default. + +What: /sys/fs/f2fs/<disk>/gc_pin_file_thresh +Date: January 2018 +Contact: Jaegeuk Kim <jaegeuk@kernel.org> +Description: This indicates how many GC can be failed for the pinned + file. If it exceeds this, F2FS doesn't guarantee its pinning + state. 2048 trials is set by default. What: /sys/fs/f2fs/<disk>/extension_list Date: Feburary 2018 Contact: "Chao Yu" <yuchao0@huawei.com> -Description: - Used to control configure extension list: - - Query: cat /sys/fs/f2fs/<disk>/extension_list - - Add: echo '[h/c]extension' > /sys/fs/f2fs/<disk>/extension_list - - Del: echo '[h/c]!extension' > /sys/fs/f2fs/<disk>/extension_list - - [h] means add/del hot file extension - - [c] means add/del cold file extension +Description: Used to control configure extension list: + - Query: cat /sys/fs/f2fs/<disk>/extension_list + - Add: echo '[h/c]extension' > /sys/fs/f2fs/<disk>/extension_list + - Del: echo '[h/c]!extension' > /sys/fs/f2fs/<disk>/extension_list + - [h] means add/del hot file extension + - [c] means add/del cold file extension What: /sys/fs/f2fs/<disk>/unusable Date April 2019 Contact: "Daniel Rosenberg" <drosen@google.com> -Description: - If checkpoint=disable, it displays the number of blocks that are unusable. - If checkpoint=enable it displays the enumber of blocks that would be unusable - if checkpoint=disable were to be set. +Description: If checkpoint=disable, it displays the number of blocks that + are unusable. + If checkpoint=enable it displays the enumber of blocks that + would be unusable if checkpoint=disable were to be set. What: /sys/fs/f2fs/<disk>/encoding Date July 2019 Contact: "Daniel Rosenberg" <drosen@google.com> -Description: - Displays name and version of the encoding set for the filesystem. - If no encoding is set, displays (none) +Description: Displays name and version of the encoding set for the filesystem. + If no encoding is set, displays (none) + +What: /sys/fs/f2fs/<disk>/free_segments +Date: September 2019 +Contact: "Hridya Valsaraju" <hridya@google.com> +Description: Number of free segments in disk. + +What: /sys/fs/f2fs/<disk>/cp_foreground_calls +Date: September 2019 +Contact: "Hridya Valsaraju" <hridya@google.com> +Description: Number of checkpoint operations performed on demand. Available when + CONFIG_F2FS_STAT_FS=y. + +What: /sys/fs/f2fs/<disk>/cp_background_calls +Date: September 2019 +Contact: "Hridya Valsaraju" <hridya@google.com> +Description: Number of checkpoint operations performed in the background to + free segments. Available when CONFIG_F2FS_STAT_FS=y. + +What: /sys/fs/f2fs/<disk>/gc_foreground_calls +Date: September 2019 +Contact: "Hridya Valsaraju" <hridya@google.com> +Description: Number of garbage collection operations performed on demand. + Available when CONFIG_F2FS_STAT_FS=y. + +What: /sys/fs/f2fs/<disk>/gc_background_calls +Date: September 2019 +Contact: "Hridya Valsaraju" <hridya@google.com> +Description: Number of garbage collection operations triggered in background. + Available when CONFIG_F2FS_STAT_FS=y. + +What: /sys/fs/f2fs/<disk>/moved_blocks_foreground +Date: September 2019 +Contact: "Hridya Valsaraju" <hridya@google.com> +Description: Number of blocks moved by garbage collection in foreground. + Available when CONFIG_F2FS_STAT_FS=y. + +What: /sys/fs/f2fs/<disk>/moved_blocks_background +Date: September 2019 +Contact: "Hridya Valsaraju" <hridya@google.com> +Description: Number of blocks moved by garbage collection in background. + Available when CONFIG_F2FS_STAT_FS=y. + +What: /sys/fs/f2fs/<disk>/avg_vblocks +Date: September 2019 +Contact: "Hridya Valsaraju" <hridya@google.com> +Description: Average number of valid blocks. + Available when CONFIG_F2FS_STAT_FS=y. diff --git a/Documentation/ABI/testing/sysfs-platform-asus-wmi b/Documentation/ABI/testing/sysfs-platform-asus-wmi index 9e99f2909612..1efac0ddb417 100644 --- a/Documentation/ABI/testing/sysfs-platform-asus-wmi +++ b/Documentation/ABI/testing/sysfs-platform-asus-wmi @@ -46,3 +46,13 @@ Description: * 0 - normal, * 1 - overboost, * 2 - silent + +What: /sys/devices/platform/<platform>/throttle_thermal_policy +Date: Dec 2019 +KernelVersion: 5.6 +Contact: "Leonid Maksymchuk" <leonmaxx@gmail.com> +Description: + Throttle thermal policy mode: + * 0 - default, + * 1 - overboost, + * 2 - silent diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index 6f87b9dd384b..5e6ead29124c 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -407,3 +407,16 @@ Contact: Kalesh Singh <kaleshsingh96@gmail.com> Description: The /sys/power/suspend_stats/last_failed_step file contains the last failed step in the suspend/resume path. + +What: /sys/power/sync_on_suspend +Date: October 2019 +Contact: Jonas Meurer <jonas@freesources.org> +Description: + This file controls whether or not the kernel will sync() + filesystems during system suspend (after freezing user space + and before suspending devices). + + Writing a "1" to this file enables the sync() and writing a "0" + disables it. Reads from the file return the current value. + The default is "1" if the build-time "SUSPEND_SKIP_SYNC" config + flag is unset, or "0" otherwise. diff --git a/Documentation/ABI/testing/usb-charger-uevent b/Documentation/ABI/testing/usb-charger-uevent new file mode 100644 index 000000000000..419a92dd0d86 --- /dev/null +++ b/Documentation/ABI/testing/usb-charger-uevent @@ -0,0 +1,46 @@ +What: Raise a uevent when a USB charger is inserted or removed +Date: 2020-01-14 +KernelVersion: 5.6 +Contact: linux-usb@vger.kernel.org +Description: There are two USB charger states: + USB_CHARGER_ABSENT + USB_CHARGER_PRESENT + There are five USB charger types: + USB_CHARGER_UNKNOWN_TYPE: Charger type is unknown + USB_CHARGER_SDP_TYPE: Standard Downstream Port + USB_CHARGER_CDP_TYPE: Charging Downstream Port + USB_CHARGER_DCP_TYPE: Dedicated Charging Port + USB_CHARGER_ACA_TYPE: Accessory Charging Adapter + https://www.usb.org/document-library/battery-charging-v12-spec-and-adopters-agreement + + Here are two examples taken using udevadm monitor -p when + USB charger is online: + UDEV change /devices/soc0/usbphynop1 (platform) + ACTION=change + DEVPATH=/devices/soc0/usbphynop1 + DRIVER=usb_phy_generic + MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv + OF_COMPATIBLE_0=usb-nop-xceiv + OF_COMPATIBLE_N=1 + OF_FULLNAME=/usbphynop1 + OF_NAME=usbphynop1 + SEQNUM=2493 + SUBSYSTEM=platform + USB_CHARGER_STATE=USB_CHARGER_PRESENT + USB_CHARGER_TYPE=USB_CHARGER_SDP_TYPE + USEC_INITIALIZED=227422826 + + USB charger is offline: + KERNEL change /devices/soc0/usbphynop1 (platform) + ACTION=change + DEVPATH=/devices/soc0/usbphynop1 + DRIVER=usb_phy_generic + MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv + OF_COMPATIBLE_0=usb-nop-xceiv + OF_COMPATIBLE_N=1 + OF_FULLNAME=/usbphynop1 + OF_NAME=usbphynop1 + SEQNUM=2494 + SUBSYSTEM=platform + USB_CHARGER_STATE=USB_CHARGER_ABSENT + USB_CHARGER_TYPE=USB_CHARGER_UNKNOWN_TYPE |