diff options
Diffstat (limited to 'Documentation/DocBook')
25 files changed, 1860 insertions, 76 deletions
diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl index 5f7c55999c77..800fe7a9024c 100644 --- a/Documentation/DocBook/80211.tmpl +++ b/Documentation/DocBook/80211.tmpl @@ -136,6 +136,7 @@ !Finclude/net/cfg80211.h cfg80211_ibss_joined !Finclude/net/cfg80211.h cfg80211_connect_result !Finclude/net/cfg80211.h cfg80211_connect_bss +!Finclude/net/cfg80211.h cfg80211_connect_timeout !Finclude/net/cfg80211.h cfg80211_roamed !Finclude/net/cfg80211.h cfg80211_disconnected !Finclude/net/cfg80211.h cfg80211_ready_on_channel diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index d70f9b68174e..01bab5014a4a 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -6,6 +6,8 @@ # To add a new book the only step required is to add the book to the # list of DOCBOOKS. +ifeq ($(IGNORE_DOCBOOKS),) + DOCBOOKS := z8530book.xml device-drivers.xml \ kernel-hacking.xml kernel-locking.xml deviceiobook.xml \ writing_usb_driver.xml networking.xml \ @@ -33,10 +35,6 @@ PDF_METHOD = $(prefer-db2x) PS_METHOD = $(prefer-db2x) -### -# The targets that may be used. -PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs - targets += $(DOCBOOKS) BOOKS := $(addprefix $(obj)/,$(DOCBOOKS)) xmldocs: $(BOOKS) @@ -63,6 +61,9 @@ installmandocs: mandocs sort -k 2 -k 1 | uniq -f 1 | sed -e 's: :/:' | \ xargs install -m 644 -t /usr/local/man/man9/ +# no-op for the DocBook toolchain +epubdocs: + ### #External programs used KERNELDOCXMLREF = $(srctree)/scripts/kernel-doc-xml-ref @@ -216,10 +217,24 @@ silent_gen_xml = : -e "s/>/\\>/g"; \ echo "</programlisting>") > $@ +else + +# Needed, due to cleanmediadocs +include Documentation/DocBook/media/Makefile + +htmldocs: +pdfdocs: +psdocs: +xmldocs: +installmandocs: + +endif # IGNORE_DOCBOOKS + + ### # Help targets as used by the top-level makefile dochelp: - @echo ' Linux kernel internal documentation in different formats:' + @echo ' Linux kernel internal documentation in different formats (DocBook):' @echo ' htmldocs - HTML' @echo ' pdfdocs - PDF' @echo ' psdocs - Postscript' @@ -228,8 +243,11 @@ dochelp: @echo ' installmandocs - install man pages generated by mandocs' @echo ' cleandocs - clean all generated DocBook files' @echo - @echo 'make DOCBOOKS="s1.xml s2.xml" [target] Generate only docs s1.xml s2.xml' + @echo ' make DOCBOOKS="s1.xml s2.xml" [target] Generate only docs s1.xml s2.xml' @echo ' valid values for DOCBOOKS are: $(DOCBOOKS)' + @echo + @echo " make IGNORE_DOCBOOKS=1 [target] Don't generate docs from Docbook" + @echo ' This is useful to generate only the ReST docs (Sphinx)' ### diff --git a/Documentation/DocBook/crypto-API.tmpl b/Documentation/DocBook/crypto-API.tmpl index d55dc5a39bad..fb2a1526f6ec 100644 --- a/Documentation/DocBook/crypto-API.tmpl +++ b/Documentation/DocBook/crypto-API.tmpl @@ -440,8 +440,8 @@ The type flag specifies the type of the cipher algorithm. The caller usually provides a 0 when the caller wants the default handling. Otherwise, the caller may provide the - following selections which match the the aforementioned - cipher types: + following selections which match the aforementioned cipher + types: </para> <itemizedlist> diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index c245e4eea560..99cdc05bbb7a 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -128,16 +128,44 @@ X!Edrivers/base/interface.c !Edrivers/base/platform.c !Edrivers/base/bus.c </sect1> - <sect1><title>Device Drivers DMA Management</title> + <sect1> + <title>Buffer Sharing and Synchronization</title> + <para> + The dma-buf subsystem provides the framework for sharing buffers + for hardware (DMA) access across multiple device drivers and + subsystems, and for synchronizing asynchronous hardware access. + </para> + <para> + This is used, for example, by drm "prime" multi-GPU support, but + is of course not limited to GPU use cases. + </para> + <para> + The three main components of this are: (1) dma-buf, representing + a sg_table and exposed to userspace as a file descriptor to allow + passing between devices, (2) fence, which provides a mechanism + to signal when one device as finished access, and (3) reservation, + which manages the shared or exclusive fence(s) associated with + the buffer. + </para> + <sect2><title>dma-buf</title> !Edrivers/dma-buf/dma-buf.c +!Iinclude/linux/dma-buf.h + </sect2> + <sect2><title>reservation</title> +!Pdrivers/dma-buf/reservation.c Reservation Object Overview +!Edrivers/dma-buf/reservation.c +!Iinclude/linux/reservation.h + </sect2> + <sect2><title>fence</title> !Edrivers/dma-buf/fence.c -!Edrivers/dma-buf/seqno-fence.c !Iinclude/linux/fence.h +!Edrivers/dma-buf/seqno-fence.c !Iinclude/linux/seqno-fence.h -!Edrivers/dma-buf/reservation.c -!Iinclude/linux/reservation.h !Edrivers/dma-buf/sync_file.c !Iinclude/linux/sync_file.h + </sect2> + </sect1> + <sect1><title>Device Drivers DMA Management</title> !Edrivers/base/dma-coherent.c !Edrivers/base/dma-mapping.c </sect1> @@ -219,61 +247,6 @@ X!Isound/sound_firmware.c --> </chapter> - <chapter id="mediadev"> - <title>Media Devices</title> - - <sect1><title>Video2Linux devices</title> -!Iinclude/media/tuner.h -!Iinclude/media/tuner-types.h -!Iinclude/media/tveeprom.h -!Iinclude/media/v4l2-async.h -!Iinclude/media/v4l2-ctrls.h -!Iinclude/media/v4l2-dv-timings.h -!Iinclude/media/v4l2-event.h -!Iinclude/media/v4l2-flash-led-class.h -!Iinclude/media/v4l2-mc.h -!Iinclude/media/v4l2-mediabus.h -!Iinclude/media/v4l2-mem2mem.h -!Iinclude/media/v4l2-of.h -!Iinclude/media/v4l2-rect.h -!Iinclude/media/v4l2-subdev.h -!Iinclude/media/videobuf2-core.h -!Iinclude/media/videobuf2-v4l2.h -!Iinclude/media/videobuf2-memops.h - </sect1> - <sect1><title>Digital TV (DVB) devices</title> - <sect1><title>Digital TV Common functions</title> -!Idrivers/media/dvb-core/dvb_math.h -!Idrivers/media/dvb-core/dvb_ringbuffer.h -!Idrivers/media/dvb-core/dvbdev.h - </sect1> - <sect1><title>Digital TV Frontend kABI</title> -!Pdrivers/media/dvb-core/dvb_frontend.h Digital TV Frontend -!Idrivers/media/dvb-core/dvb_frontend.h - </sect1> - <sect1><title>Digital TV Demux kABI</title> -!Pdrivers/media/dvb-core/demux.h Digital TV Demux - <sect1><title>Demux Callback API</title> -!Pdrivers/media/dvb-core/demux.h Demux Callback - </sect1> -!Idrivers/media/dvb-core/demux.h - </sect1> - <sect1><title>Digital TV Conditional Access kABI</title> -!Idrivers/media/dvb-core/dvb_ca_en50221.h - </sect1> - </sect1> - <sect1><title>Remote Controller devices</title> -!Iinclude/media/rc-core.h -!Iinclude/media/lirc_dev.h - </sect1> - <sect1><title>Media Controller devices</title> -!Pinclude/media/media-device.h Media Controller -!Iinclude/media/media-device.h -!Iinclude/media/media-devnode.h -!Iinclude/media/media-entity.h - </sect1> - - </chapter> <chapter id="uart16x50"> <title>16x50 UART Driver</title> diff --git a/Documentation/DocBook/iio.tmpl b/Documentation/DocBook/iio.tmpl index f525bf56d1dd..e2ab6a1f223e 100644 --- a/Documentation/DocBook/iio.tmpl +++ b/Documentation/DocBook/iio.tmpl @@ -594,7 +594,7 @@ irqreturn_t sensor_iio_pollfunc(int irq, void *p) { - pf->timestamp = iio_get_time_ns(); + pf->timestamp = iio_get_time_ns((struct indio_dev *)p); return IRQ_WAKE_THREAD; } diff --git a/Documentation/DocBook/media/Makefile b/Documentation/DocBook/media/Makefile index 2840ff483d5a..fdc138624800 100644 --- a/Documentation/DocBook/media/Makefile +++ b/Documentation/DocBook/media/Makefile @@ -64,6 +64,7 @@ IOCTLS = \ $(shell perl -ne 'print "$$1 " if /\#define\s+([A-Z][^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/net.h) \ $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/video.h) \ $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/media.h) \ + $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/cec.h) \ $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/v4l2-subdev.h) \ DEFINES = \ @@ -100,6 +101,7 @@ STRUCTS = \ $(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/ && !/_old/)' $(srctree)/include/uapi/linux/dvb/net.h) \ $(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/video.h) \ $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/media.h) \ + $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/linux/cec.h) \ $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-subdev.h) \ $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-mediabus.h) diff --git a/Documentation/DocBook/media/v4l/biblio.xml b/Documentation/DocBook/media/v4l/biblio.xml index 9beb30f0071b..87f1d24958aa 100644 --- a/Documentation/DocBook/media/v4l/biblio.xml +++ b/Documentation/DocBook/media/v4l/biblio.xml @@ -342,6 +342,16 @@ in the frequency range from 87,5 to 108,0 MHz</title> <subtitle>Specification Version 1.4a</subtitle> </biblioentry> + <biblioentry id="hdmi2"> + <abbrev>HDMI2</abbrev> + <authorgroup> + <corpauthor>HDMI Licensing LLC +(<ulink url="http://www.hdmi.org">http://www.hdmi.org</ulink>)</corpauthor> + </authorgroup> + <title>High-Definition Multimedia Interface</title> + <subtitle>Specification Version 2.0</subtitle> + </biblioentry> + <biblioentry id="dp"> <abbrev>DP</abbrev> <authorgroup> diff --git a/Documentation/DocBook/media/v4l/cec-api.xml b/Documentation/DocBook/media/v4l/cec-api.xml new file mode 100644 index 000000000000..7062c1fa4904 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-api.xml @@ -0,0 +1,75 @@ +<partinfo> + <authorgroup> + <author> + <firstname>Hans</firstname> + <surname>Verkuil</surname> + <affiliation><address><email>hans.verkuil@cisco.com</email></address></affiliation> + <contrib>Initial version.</contrib> + </author> + </authorgroup> + <copyright> + <year>2016</year> + <holder>Hans Verkuil</holder> + </copyright> + + <revhistory> + <!-- Put document revisions here, newest first. --> + <revision> + <revnumber>1.0.0</revnumber> + <date>2016-03-17</date> + <authorinitials>hv</authorinitials> + <revremark>Initial revision</revremark> + </revision> + </revhistory> +</partinfo> + +<title>CEC API</title> + +<chapter id="cec-api"> + <title>CEC: Consumer Electronics Control</title> + + <section id="cec-intro"> + <title>Introduction</title> + <para> + Note: this documents the proposed CEC API. This API is not yet finalized and + is currently only available as a staging kernel module. + </para> + <para>HDMI connectors provide a single pin for use by the Consumer Electronics + Control protocol. This protocol allows different devices connected by an HDMI cable + to communicate. The protocol for CEC version 1.4 is defined in supplements 1 (CEC) + and 2 (HEAC or HDMI Ethernet and Audio Return Channel) of the HDMI 1.4a + (<xref linkend="hdmi" />) specification and the extensions added to CEC version 2.0 + are defined in chapter 11 of the HDMI 2.0 (<xref linkend="hdmi2" />) specification. + </para> + + <para>The bitrate is very slow (effectively no more than 36 bytes per second) and + is based on the ancient AV.link protocol used in old SCART connectors. The protocol + closely resembles a crazy Rube Goldberg contraption and is an unholy mix of low and + high level messages. Some messages, especially those part of the HEAC protocol layered + on top of CEC, need to be handled by the kernel, others can be handled either by the + kernel or by userspace.</para> + + <para>In addition, CEC can be implemented in HDMI receivers, transmitters and in USB + devices that have an HDMI input and an HDMI output and that control just the CEC pin.</para> + + <para>Drivers that support CEC will create a CEC device node (/dev/cecX) + to give userspace access to the CEC adapter. The &CEC-ADAP-G-CAPS; ioctl will tell userspace + what it is allowed to do.</para> + </section> +</chapter> + +<appendix id="cec-user-func"> + <title>Function Reference</title> + <!-- Keep this alphabetically sorted. --> + &sub-cec-func-open; + &sub-cec-func-close; + &sub-cec-func-ioctl; + &sub-cec-func-poll; + <!-- All ioctls go here. --> + &sub-cec-ioc-adap-g-caps; + &sub-cec-ioc-adap-g-log-addrs; + &sub-cec-ioc-adap-g-phys-addr; + &sub-cec-ioc-dqevent; + &sub-cec-ioc-g-mode; + &sub-cec-ioc-receive; +</appendix> diff --git a/Documentation/DocBook/media/v4l/cec-func-close.xml b/Documentation/DocBook/media/v4l/cec-func-close.xml new file mode 100644 index 000000000000..0812c8cd9634 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-func-close.xml @@ -0,0 +1,64 @@ +<refentry id="cec-func-close"> + <refmeta> + <refentrytitle>cec close()</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>cec-close</refname> + <refpurpose>Close a cec device</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcsynopsisinfo>#include <unistd.h></funcsynopsisinfo> + <funcprototype> + <funcdef>int <function>close</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para> + Note: this documents the proposed CEC API. This API is not yet finalized and + is currently only available as a staging kernel module. + </para> + + <para>Closes the cec device. Resources associated with the file descriptor + are freed. The device configuration remain unchanged.</para> + </refsect1> + + <refsect1> + <title>Return Value</title> + + <para><function>close</function> returns 0 on success. On error, -1 is + returned, and <varname>errno</varname> is set appropriately. Possible error + codes are:</para> + + <variablelist> + <varlistentry> + <term><errorcode>EBADF</errorcode></term> + <listitem> + <para><parameter>fd</parameter> is not a valid open file descriptor. + </para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-func-ioctl.xml b/Documentation/DocBook/media/v4l/cec-func-ioctl.xml new file mode 100644 index 000000000000..f92817a2dc80 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-func-ioctl.xml @@ -0,0 +1,78 @@ +<refentry id="cec-func-ioctl"> + <refmeta> + <refentrytitle>cec ioctl()</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>cec-ioctl</refname> + <refpurpose>Control a cec device</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcsynopsisinfo>#include <sys/ioctl.h></funcsynopsisinfo> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>void *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>CEC ioctl request code as defined in the cec.h header file, + for example CEC_ADAP_G_CAPS.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para>Pointer to a request-specific structure.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + <para> + Note: this documents the proposed CEC API. This API is not yet finalized and + is currently only available as a staging kernel module. + </para> + + <para>The <function>ioctl()</function> function manipulates cec device + parameters. The argument <parameter>fd</parameter> must be an open file + descriptor.</para> + <para>The ioctl <parameter>request</parameter> code specifies the cec + function to be called. It has encoded in it whether the argument is an + input, output or read/write parameter, and the size of the argument + <parameter>argp</parameter> in bytes.</para> + <para>Macros and structures definitions specifying cec ioctl requests and + their parameters are located in the cec.h header file. All cec ioctl + requests, their respective function and parameters are specified in + <xref linkend="cec-user-func" />.</para> + </refsect1> + + <refsect1> + &return-value; + + <para>Request-specific error codes are listed in the + individual requests descriptions.</para> + <para>When an ioctl that takes an output or read/write parameter fails, + the parameter remains unmodified.</para> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-func-open.xml b/Documentation/DocBook/media/v4l/cec-func-open.xml new file mode 100644 index 000000000000..2edc5555b81a --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-func-open.xml @@ -0,0 +1,104 @@ +<refentry id="cec-func-open"> + <refmeta> + <refentrytitle>cec open()</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>cec-open</refname> + <refpurpose>Open a cec device</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcsynopsisinfo>#include <fcntl.h></funcsynopsisinfo> + <funcprototype> + <funcdef>int <function>open</function></funcdef> + <paramdef>const char *<parameter>device_name</parameter></paramdef> + <paramdef>int <parameter>flags</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>device_name</parameter></term> + <listitem> + <para>Device to be opened.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>flags</parameter></term> + <listitem> + <para>Open flags. Access mode must be <constant>O_RDWR</constant>. + </para> + <para>When the <constant>O_NONBLOCK</constant> flag is +given, the &CEC-RECEIVE; ioctl will return &EAGAIN; when no message is +available, and the &CEC-TRANSMIT;, &CEC-ADAP-S-PHYS-ADDR; and +&CEC-ADAP-S-LOG-ADDRS; ioctls all act in non-blocking mode.</para> + <para>Other flags have no effect.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + <refsect1> + <title>Description</title> + <para> + Note: this documents the proposed CEC API. This API is not yet finalized and + is currently only available as a staging kernel module. + </para> + + <para>To open a cec device applications call <function>open()</function> + with the desired device name. The function has no side effects; the device + configuration remain unchanged.</para> + <para>When the device is opened in read-only mode, attempts to modify its + configuration will result in an error, and <varname>errno</varname> will be + set to <errorcode>EBADF</errorcode>.</para> + </refsect1> + <refsect1> + <title>Return Value</title> + + <para><function>open</function> returns the new file descriptor on success. + On error, -1 is returned, and <varname>errno</varname> is set appropriately. + Possible error codes include:</para> + + <variablelist> + <varlistentry> + <term><errorcode>EACCES</errorcode></term> + <listitem> + <para>The requested access to the file is not allowed.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EMFILE</errorcode></term> + <listitem> + <para>The process already has the maximum number of files open. + </para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>ENFILE</errorcode></term> + <listitem> + <para>The system limit on the total number of open files has been + reached.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>ENOMEM</errorcode></term> + <listitem> + <para>Insufficient kernel memory was available.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>ENXIO</errorcode></term> + <listitem> + <para>No device corresponding to this device special file exists. + </para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-func-poll.xml b/Documentation/DocBook/media/v4l/cec-func-poll.xml new file mode 100644 index 000000000000..1bddbde0142d --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-func-poll.xml @@ -0,0 +1,94 @@ +<refentry id="cec-func-poll"> + <refmeta> + <refentrytitle>cec poll()</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>cec-poll</refname> + <refpurpose>Wait for some event on a file descriptor</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcsynopsisinfo>#include <sys/poll.h></funcsynopsisinfo> + <funcprototype> + <funcdef>int <function>poll</function></funcdef> + <paramdef>struct pollfd *<parameter>ufds</parameter></paramdef> + <paramdef>unsigned int <parameter>nfds</parameter></paramdef> + <paramdef>int <parameter>timeout</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Description</title> + + <para> + Note: this documents the proposed CEC API. This API is not yet finalized and + is currently only available as a staging kernel module. + </para> + + <para>With the <function>poll()</function> function applications +can wait for CEC events.</para> + + <para>On success <function>poll()</function> returns the number of +file descriptors that have been selected (that is, file descriptors +for which the <structfield>revents</structfield> field of the +respective <structname>pollfd</structname> structure is non-zero). +CEC devices set the <constant>POLLIN</constant> and +<constant>POLLRDNORM</constant> flags in the +<structfield>revents</structfield> field if there are messages in the +receive queue. If the transmit queue has room for new messages, the +<constant>POLLOUT</constant> and <constant>POLLWRNORM</constant> +flags are set. If there are events in the event queue, then the +<constant>POLLPRI</constant> flag is set. +When the function timed out it returns a value of zero, on +failure it returns <returnvalue>-1</returnvalue> and the +<varname>errno</varname> variable is set appropriately. +</para> + + <para>For more details see the +<function>poll()</function> manual page.</para> + </refsect1> + + <refsect1> + <title>Return Value</title> + + <para>On success, <function>poll()</function> returns the number +structures which have non-zero <structfield>revents</structfield> +fields, or zero if the call timed out. On error +<returnvalue>-1</returnvalue> is returned, and the +<varname>errno</varname> variable is set appropriately:</para> + + <variablelist> + <varlistentry> + <term><errorcode>EBADF</errorcode></term> + <listitem> + <para>One or more of the <parameter>ufds</parameter> members +specify an invalid file descriptor.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EFAULT</errorcode></term> + <listitem> + <para><parameter>ufds</parameter> references an inaccessible +memory area.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EINTR</errorcode></term> + <listitem> + <para>The call was interrupted by a signal.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EINVAL</errorcode></term> + <listitem> + <para>The <parameter>nfds</parameter> argument is greater +than <constant>OPEN_MAX</constant>.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-ioc-adap-g-caps.xml b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-caps.xml new file mode 100644 index 000000000000..3523ef2259b1 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-caps.xml @@ -0,0 +1,151 @@ +<refentry id="cec-ioc-adap-g-caps"> + <refmeta> + <refentrytitle>ioctl CEC_ADAP_G_CAPS</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>CEC_ADAP_G_CAPS</refname> + <refpurpose>Query device capabilities</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct cec_caps *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>File descriptor returned by + <link linkend='cec-func-open'><function>open()</function></link>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>CEC_ADAP_G_CAPS</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para> + Note: this documents the proposed CEC API. This API is not yet finalized and + is currently only available as a staging kernel module. + </para> + + <para>All cec devices must support the <constant>CEC_ADAP_G_CAPS</constant> + ioctl. To query device information, applications call the ioctl with a + pointer to a &cec-caps;. The driver fills the structure and returns + the information to the application. + The ioctl never fails.</para> + + <table pgwide="1" frame="none" id="cec-caps"> + <title>struct <structname>cec_caps</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>char</entry> + <entry><structfield>driver[32]</structfield></entry> + <entry>The name of the cec adapter driver.</entry> + </row> + <row> + <entry>char</entry> + <entry><structfield>name[32]</structfield></entry> + <entry>The name of this CEC adapter. The combination <structfield>driver</structfield> + and <structfield>name</structfield> must be unique.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>capabilities</structfield></entry> + <entry>The capabilities of the CEC adapter, see <xref + linkend="cec-capabilities" />.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>version</structfield></entry> + <entry>CEC Framework API version, formatted with the + <constant>KERNEL_VERSION()</constant> macro.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="cec-capabilities"> + <title>CEC Capabilities Flags</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_CAP_PHYS_ADDR</constant></entry> + <entry>0x00000001</entry> + <entry>Userspace has to configure the physical address by + calling &CEC-ADAP-S-PHYS-ADDR;. If this capability isn't set, + then setting the physical address is handled by the kernel + whenever the EDID is set (for an HDMI receiver) or read (for + an HDMI transmitter).</entry> + </row> + <row> + <entry><constant>CEC_CAP_LOG_ADDRS</constant></entry> + <entry>0x00000002</entry> + <entry>Userspace has to configure the logical addresses by + calling &CEC-ADAP-S-LOG-ADDRS;. If this capability isn't set, + then the kernel will have configured this.</entry> + </row> + <row> + <entry><constant>CEC_CAP_TRANSMIT</constant></entry> + <entry>0x00000004</entry> + <entry>Userspace can transmit CEC messages by calling &CEC-TRANSMIT;. This + implies that userspace can be a follower as well, since being able to + transmit messages is a prerequisite of becoming a follower. If this + capability isn't set, then the kernel will handle all CEC transmits + and process all CEC messages it receives. + </entry> + </row> + <row> + <entry><constant>CEC_CAP_PASSTHROUGH</constant></entry> + <entry>0x00000008</entry> + <entry>Userspace can use the passthrough mode by + calling &CEC-S-MODE;.</entry> + </row> + <row> + <entry><constant>CEC_CAP_RC</constant></entry> + <entry>0x00000010</entry> + <entry>This adapter supports the remote control protocol.</entry> + </row> + <row> + <entry><constant>CEC_CAP_MONITOR_ALL</constant></entry> + <entry>0x00000020</entry> + <entry>The CEC hardware can monitor all messages, not just directed and + broadcast messages.</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml new file mode 100644 index 000000000000..302b8294f7fc --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml @@ -0,0 +1,329 @@ +<refentry id="cec-ioc-adap-g-log-addrs"> + <refmeta> + <refentrytitle>ioctl CEC_ADAP_G_LOG_ADDRS, CEC_ADAP_S_LOG_ADDRS</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>CEC_ADAP_G_LOG_ADDRS</refname> + <refname>CEC_ADAP_S_LOG_ADDRS</refname> + <refpurpose>Get or set the logical addresses</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct cec_log_addrs *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>File descriptor returned by + <link linkend='cec-func-open'><function>open()</function></link>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>CEC_ADAP_G_LOG_ADDRS, CEC_ADAP_S_LOG_ADDRS</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para> + Note: this documents the proposed CEC API. This API is not yet finalized and + is currently only available as a staging kernel module. + </para> + + <para>To query the current CEC logical addresses, applications call the +<constant>CEC_ADAP_G_LOG_ADDRS</constant> ioctl with a pointer to a +<structname>cec_log_addrs</structname> structure where the drivers stores the +logical addresses.</para> + + <para>To set new logical addresses, applications fill in struct <structname>cec_log_addrs</structname> +and call the <constant>CEC_ADAP_S_LOG_ADDRS</constant> ioctl with a pointer to this struct. +The <constant>CEC_ADAP_S_LOG_ADDRS</constant> ioctl is only available if +<constant>CEC_CAP_LOG_ADDRS</constant> is set (&ENOTTY; is returned otherwise). This ioctl will block until all +requested logical addresses have been claimed. <constant>CEC_ADAP_S_LOG_ADDRS</constant> +can only be called by a file handle in initiator mode (see &CEC-S-MODE;).</para> + + <table pgwide="1" frame="none" id="cec-log-addrs"> + <title>struct <structname>cec_log_addrs</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u8</entry> + <entry><structfield>log_addr</structfield>[CEC_MAX_LOG_ADDRS]</entry> + <entry>The actual logical addresses that were claimed. This is set by the + driver. If no logical address could be claimed, then it is set to + <constant>CEC_LOG_ADDR_INVALID</constant>. If this adapter is Unregistered, + then <structfield>log_addr[0]</structfield> is set to 0xf and all others to + <constant>CEC_LOG_ADDR_INVALID</constant>.</entry> + </row> + <row> + <entry>__u16</entry> + <entry><structfield>log_addr_mask</structfield></entry> + <entry>The bitmask of all logical addresses this adapter has claimed. + If this adapter is Unregistered then <structfield>log_addr_mask</structfield> + sets bit 15 and clears all other bits. If this adapter is not configured at all, then + <structfield>log_addr_mask</structfield> is set to 0. Set by the driver.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>cec_version</structfield></entry> + <entry>The CEC version that this adapter shall use. See + <xref linkend="cec-versions" />. + Used to implement the <constant>CEC_MSG_CEC_VERSION</constant> and + <constant>CEC_MSG_REPORT_FEATURES</constant> messages. Note that + <constant>CEC_OP_CEC_VERSION_1_3A</constant> is not allowed + by the CEC framework. + </entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>num_log_addrs</structfield></entry> + <entry>Number of logical addresses to set up. Must be ≤ + <structfield>available_log_addrs</structfield> as returned by + &CEC-ADAP-G-CAPS;. All arrays in this structure are only filled up to + index <structfield>available_log_addrs</structfield>-1. The remaining + array elements will be ignored. Note that the CEC 2.0 standard allows + for a maximum of 2 logical addresses, although some hardware has support + for more. <constant>CEC_MAX_LOG_ADDRS</constant> is 4. The driver will + return the actual number of logical addresses it could claim, which may + be less than what was requested. If this field is set to 0, then the + CEC adapter shall clear all claimed logical addresses and all other + fields will be ignored.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>vendor_id</structfield></entry> + <entry>The vendor ID is a 24-bit number that identifies the specific + vendor or entity. Based on this ID vendor specific commands may be + defined. If you do not want a vendor ID then set it to + <constant>CEC_VENDOR_ID_NONE</constant>.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>flags</structfield></entry> + <entry>Flags. No flags are defined yet, so set this to 0.</entry> + </row> + <row> + <entry>char</entry> + <entry><structfield>osd_name</structfield>[15]</entry> + <entry>The On-Screen Display name as is returned by the + <constant>CEC_MSG_SET_OSD_NAME</constant> message.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>primary_device_type</structfield>[CEC_MAX_LOG_ADDRS]</entry> + <entry>Primary device type for each logical address. See + <xref linkend="cec-prim-dev-types" /> for possible types.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>log_addr_type</structfield>[CEC_MAX_LOG_ADDRS]</entry> + <entry>Logical address types. See <xref linkend="cec-log-addr-types" /> for + possible types. The driver will update this with the actual logical address + type that it claimed (e.g. it may have to fallback to + <constant>CEC_LOG_ADDR_TYPE_UNREGISTERED</constant>).</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>all_device_types</structfield>[CEC_MAX_LOG_ADDRS]</entry> + <entry>CEC 2.0 specific: all device types. See <xref linkend="cec-all-dev-types-flags" />. + Used to implement the <constant>CEC_MSG_REPORT_FEATURES</constant> message. + This field is ignored if <structfield>cec_version</structfield> < + <constant>CEC_OP_CEC_VERSION_2_0</constant>.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>features</structfield>[CEC_MAX_LOG_ADDRS][12]</entry> + <entry>Features for each logical address. Used to implement the + <constant>CEC_MSG_REPORT_FEATURES</constant> message. The 12 bytes include + both the RC Profile and the Device Features. + This field is ignored if <structfield>cec_version</structfield> < + <constant>CEC_OP_CEC_VERSION_2_0</constant>.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="cec-versions"> + <title>CEC Versions</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_OP_CEC_VERSION_1_3A</constant></entry> + <entry>4</entry> + <entry>CEC version according to the HDMI 1.3a standard.</entry> + </row> + <row> + <entry><constant>CEC_OP_CEC_VERSION_1_4B</constant></entry> + <entry>5</entry> + <entry>CEC version according to the HDMI 1.4b standard.</entry> + </row> + <row> + <entry><constant>CEC_OP_CEC_VERSION_2_0</constant></entry> + <entry>6</entry> + <entry>CEC version according to the HDMI 2.0 standard.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="cec-prim-dev-types"> + <title>CEC Primary Device Types</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_OP_PRIM_DEVTYPE_TV</constant></entry> + <entry>0</entry> + <entry>Use for a TV.</entry> + </row> + <row> + <entry><constant>CEC_OP_PRIM_DEVTYPE_RECORD</constant></entry> + <entry>1</entry> + <entry>Use for a recording device.</entry> + </row> + <row> + <entry><constant>CEC_OP_PRIM_DEVTYPE_TUNER</constant></entry> + <entry>3</entry> + <entry>Use for a device with a tuner.</entry> + </row> + <row> + <entry><constant>CEC_OP_PRIM_DEVTYPE_PLAYBACK</constant></entry> + <entry>4</entry> + <entry>Use for a playback device.</entry> + </row> + <row> + <entry><constant>CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM</constant></entry> + <entry>5</entry> + <entry>Use for an audio system (e.g. an audio/video receiver).</entry> + </row> + <row> + <entry><constant>CEC_OP_PRIM_DEVTYPE_SWITCH</constant></entry> + <entry>6</entry> + <entry>Use for a CEC switch.</entry> + </row> + <row> + <entry><constant>CEC_OP_PRIM_DEVTYPE_VIDEOPROC</constant></entry> + <entry>7</entry> + <entry>Use for a video processor device.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="cec-log-addr-types"> + <title>CEC Logical Address Types</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_LOG_ADDR_TYPE_TV</constant></entry> + <entry>0</entry> + <entry>Use for a TV.</entry> + </row> + <row> + <entry><constant>CEC_LOG_ADDR_TYPE_RECORD</constant></entry> + <entry>1</entry> + <entry>Use for a recording device.</entry> + </row> + <row> + <entry><constant>CEC_LOG_ADDR_TYPE_TUNER</constant></entry> + <entry>2</entry> + <entry>Use for a tuner device.</entry> + </row> + <row> + <entry><constant>CEC_LOG_ADDR_TYPE_PLAYBACK</constant></entry> + <entry>3</entry> + <entry>Use for a playback device.</entry> + </row> + <row> + <entry><constant>CEC_LOG_ADDR_TYPE_AUDIOSYSTEM</constant></entry> + <entry>4</entry> + <entry>Use for an audio system device.</entry> + </row> + <row> + <entry><constant>CEC_LOG_ADDR_TYPE_SPECIFIC</constant></entry> + <entry>5</entry> + <entry>Use for a second TV or for a video processor device.</entry> + </row> + <row> + <entry><constant>CEC_LOG_ADDR_TYPE_UNREGISTERED</constant></entry> + <entry>6</entry> + <entry>Use this if you just want to remain unregistered. + Used for pure CEC switches or CDC-only devices (CDC: + Capability Discovery and Control).</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="cec-all-dev-types-flags"> + <title>CEC All Device Types Flags</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_OP_ALL_DEVTYPE_TV</constant></entry> + <entry>0x80</entry> + <entry>This supports the TV type.</entry> + </row> + <row> + <entry><constant>CEC_OP_ALL_DEVTYPE_RECORD</constant></entry> + <entry>0x40</entry> + <entry>This supports the Recording type.</entry> + </row> + <row> + <entry><constant>CEC_OP_ALL_DEVTYPE_TUNER</constant></entry> + <entry>0x20</entry> + <entry>This supports the Tuner type.</entry> + </row> + <row> + <entry><constant>CEC_OP_ALL_DEVTYPE_PLAYBACK</constant></entry> + <entry>0x10</entry> + <entry>This supports the Playback type.</entry> + </row> + <row> + <entry><constant>CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM</constant></entry> + <entry>0x08</entry> + <entry>This supports the Audio System type.</entry> + </row> + <row> + <entry><constant>CEC_OP_ALL_DEVTYPE_SWITCH</constant></entry> + <entry>0x04</entry> + <entry>This supports the CEC Switch or Video Processing type.</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml new file mode 100644 index 000000000000..d95f1785080c --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml @@ -0,0 +1,86 @@ +<refentry id="cec-ioc-adap-g-phys-addr"> + <refmeta> + <refentrytitle>ioctl CEC_ADAP_G_PHYS_ADDR, CEC_ADAP_S_PHYS_ADDR</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>CEC_ADAP_G_PHYS_ADDR</refname> + <refname>CEC_ADAP_S_PHYS_ADDR</refname> + <refpurpose>Get or set the physical address</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>__u16 *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>File descriptor returned by + <link linkend='cec-func-open'><function>open()</function></link>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>CEC_ADAP_G_PHYS_ADDR, CEC_ADAP_S_PHYS_ADDR</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para> + Note: this documents the proposed CEC API. This API is not yet finalized and + is currently only available as a staging kernel module. + </para> + + <para>To query the current physical address applications call the +<constant>CEC_ADAP_G_PHYS_ADDR</constant> ioctl with a pointer to an __u16 +where the driver stores the physical address.</para> + + <para>To set a new physical address applications store the physical address in +an __u16 and call the <constant>CEC_ADAP_S_PHYS_ADDR</constant> ioctl with a +pointer to this integer. <constant>CEC_ADAP_S_PHYS_ADDR</constant> is only +available if <constant>CEC_CAP_PHYS_ADDR</constant> is set (&ENOTTY; will be returned +otherwise). <constant>CEC_ADAP_S_PHYS_ADDR</constant> +can only be called by a file handle in initiator mode (see &CEC-S-MODE;), if not +&EBUSY; will be returned.</para> + + <para>The physical address is a 16-bit number where each group of 4 bits +represent a digit of the physical address a.b.c.d where the most significant +4 bits represent 'a'. The CEC root device (usually the TV) has address 0.0.0.0. +Every device that is hooked up to an input of the TV has address a.0.0.0 (where +'a' is ≥ 1), devices hooked up to those in turn have addresses a.b.0.0, etc. +So a topology of up to 5 devices deep is supported. The physical address a +device shall use is stored in the EDID of the sink.</para> + +<para>For example, the EDID for each HDMI input of the TV will have a different +physical address of the form a.0.0.0 that the sources will read out and use as +their physical address.</para> + </refsect1> + + <refsect1> + &return-value; + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-ioc-dqevent.xml b/Documentation/DocBook/media/v4l/cec-ioc-dqevent.xml new file mode 100644 index 000000000000..697dde575cd4 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-dqevent.xml @@ -0,0 +1,202 @@ +<refentry id="cec-ioc-g-event"> + <refmeta> + <refentrytitle>ioctl CEC_DQEVENT</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>CEC_DQEVENT</refname> + <refpurpose>Dequeue a CEC event</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct cec_event *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>File descriptor returned by + <link linkend='cec-func-open'><function>open()</function></link>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>CEC_DQEVENT</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para> + Note: this documents the proposed CEC API. This API is not yet finalized and + is currently only available as a staging kernel module. + </para> + + <para>CEC devices can send asynchronous events. These can be retrieved by calling + the <constant>CEC_DQEVENT</constant> ioctl. If the file descriptor is in non-blocking + mode and no event is pending, then it will return -1 and set errno to the &EAGAIN;.</para> + + <para>The internal event queues are per-filehandle and per-event type. If there is + no more room in a queue then the last event is overwritten with the new one. This + means that intermediate results can be thrown away but that the latest event is always + available. This also means that is it possible to read two successive events that have + the same value (e.g. two CEC_EVENT_STATE_CHANGE events with the same state). In that + case the intermediate state changes were lost but it is guaranteed that the state + did change in between the two events.</para> + + <table pgwide="1" frame="none" id="cec-event-state-change"> + <title>struct <structname>cec_event_state_change</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u16</entry> + <entry><structfield>phys_addr</structfield></entry> + <entry>The current physical address.</entry> + </row> + <row> + <entry>__u16</entry> + <entry><structfield>log_addr_mask</structfield></entry> + <entry>The current set of claimed logical addresses.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="cec-event-lost-msgs"> + <title>struct <structname>cec_event_lost_msgs</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>lost_msgs</structfield></entry> + <entry>Set to the number of lost messages since the filehandle + was opened or since the last time this event was dequeued for + this filehandle. The messages lost are the oldest messages. So + when a new message arrives and there is no more room, then the + oldest message is discarded to make room for the new one. The + internal size of the message queue guarantees that all messages + received in the last two seconds will be stored. Since messages + should be replied to within a second according to the CEC + specification, this is more than enough. + </entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="cec-event"> + <title>struct <structname>cec_event</structname></title> + <tgroup cols="4"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u64</entry> + <entry><structfield>ts</structfield></entry> + <entry>Timestamp of the event in ns.</entry> + <entry></entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>event</structfield></entry> + <entry>The CEC event type, see <xref linkend="cec-events" />.</entry> + <entry></entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>flags</structfield></entry> + <entry>Event flags, see <xref linkend="cec-event-flags" />.</entry> + <entry></entry> + </row> + <row> + <entry>union</entry> + <entry>(anonymous)</entry> + <entry></entry> + <entry></entry> + </row> + <row> + <entry></entry> + <entry>struct cec_event_state_change</entry> + <entry><structfield>state_change</structfield></entry> + <entry>The new adapter state as sent by the <constant>CEC_EVENT_STATE_CHANGE</constant> + event.</entry> + </row> + <row> + <entry></entry> + <entry>struct cec_event_lost_msgs</entry> + <entry><structfield>lost_msgs</structfield></entry> + <entry>The number of lost messages as sent by the <constant>CEC_EVENT_LOST_MSGS</constant> + event.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="cec-events"> + <title>CEC Events Types</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_EVENT_STATE_CHANGE</constant></entry> + <entry>1</entry> + <entry>Generated when the CEC Adapter's state changes. When open() is + called an initial event will be generated for that filehandle with the + CEC Adapter's state at that time. + </entry> + </row> + <row> + <entry><constant>CEC_EVENT_LOST_MSGS</constant></entry> + <entry>2</entry> + <entry>Generated if one or more CEC messages were lost because the + application didn't dequeue CEC messages fast enough.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="cec-event-flags"> + <title>CEC Event Flags</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_EVENT_FL_INITIAL_VALUE</constant></entry> + <entry>1</entry> + <entry>Set for the initial events that are generated when the device is + opened. See the table above for which events do this. This allows + applications to learn the initial state of the CEC adapter at open() + time.</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-ioc-g-mode.xml b/Documentation/DocBook/media/v4l/cec-ioc-g-mode.xml new file mode 100644 index 000000000000..26b4282ad134 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-g-mode.xml @@ -0,0 +1,255 @@ +<refentry id="cec-ioc-g-mode"> + <refmeta> + <refentrytitle>ioctl CEC_G_MODE, CEC_S_MODE</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>CEC_G_MODE</refname> + <refname>CEC_S_MODE</refname> + <refpurpose>Get or set exclusive use of the CEC adapter</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>__u32 *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>File descriptor returned by + <link linkend='cec-func-open'><function>open()</function></link>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>CEC_G_MODE, CEC_S_MODE</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para> + Note: this documents the proposed CEC API. This API is not yet finalized and + is currently only available as a staging kernel module. + </para> + + <para>By default any filehandle can use &CEC-TRANSMIT; and &CEC-RECEIVE;, but +in order to prevent applications from stepping on each others toes it must be possible +to obtain exclusive access to the CEC adapter. This ioctl sets the filehandle +to initiator and/or follower mode which can be exclusive depending on the chosen +mode. The initiator is the filehandle that is used +to initiate messages, i.e. it commands other CEC devices. The follower is the filehandle +that receives messages sent to the CEC adapter and processes them. The same filehandle +can be both initiator and follower, or this role can be taken by two different +filehandles.</para> + + <para>When a CEC message is received, then the CEC framework will decide how +it will be processed. If the message is a reply to an earlier transmitted message, +then the reply is sent back to the filehandle that is waiting for it. In addition +the CEC framework will process it.</para> + + <para>If the message is not a reply, then the CEC framework will process it +first. If there is no follower, then the message is just discarded and a feature +abort is sent back to the initiator if the framework couldn't process it. If there +is a follower, then the message is passed on to the follower who will use +&CEC-RECEIVE; to dequeue the new message. The framework expects the follower to +make the right decisions.</para> + + <para>The CEC framework will process core messages unless requested otherwise +by the follower. The follower can enable the passthrough mode. In that case, the +CEC framework will pass on most core messages without processing them and +the follower will have to implement those messages. There are some messages +that the core will always process, regardless of the passthrough mode. See +<xref linkend="cec-core-processing" /> for details.</para> + + <para>If there is no initiator, then any CEC filehandle can use &CEC-TRANSMIT;. +If there is an exclusive initiator then only that initiator can call &CEC-TRANSMIT;. +The follower can of course always call &CEC-TRANSMIT;.</para> + + <para>Available initiator modes are:</para> + + <table pgwide="1" frame="none" id="cec-mode-initiator"> + <title>Initiator Modes</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_MODE_NO_INITIATOR</constant></entry> + <entry>0x0</entry> + <entry>This is not an initiator, i.e. it cannot transmit CEC messages + or make any other changes to the CEC adapter.</entry> + </row> + <row> + <entry><constant>CEC_MODE_INITIATOR</constant></entry> + <entry>0x1</entry> + <entry>This is an initiator (the default when the device is opened) and it + can transmit CEC messages and make changes to the CEC adapter, unless there + is an exclusive initiator.</entry> + </row> + <row> + <entry><constant>CEC_MODE_EXCL_INITIATOR</constant></entry> + <entry>0x2</entry> + <entry>This is an exclusive initiator and this file descriptor is the only one + that can transmit CEC messages and make changes to the CEC adapter. If someone + else is already the exclusive initiator then an attempt to become one will return + the &EBUSY; error.</entry> + </row> + </tbody> + </tgroup> + </table> + + <para>Available follower modes are:</para> + + <table pgwide="1" frame="none" id="cec-mode-follower"> + <title>Follower Modes</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_MODE_NO_FOLLOWER</constant></entry> + <entry>0x00</entry> + <entry>This is not a follower (the default when the device is opened).</entry> + </row> + <row> + <entry><constant>CEC_MODE_FOLLOWER</constant></entry> + <entry>0x10</entry> + <entry>This is a follower and it will receive CEC messages unless there is + an exclusive follower. You cannot become a follower if <constant>CEC_CAP_TRANSMIT</constant> + is not set or if <constant>CEC_MODE_NO_INITIATOR</constant> was specified, + &EINVAL; is returned in that case.</entry> + </row> + <row> + <entry><constant>CEC_MODE_EXCL_FOLLOWER</constant></entry> + <entry>0x20</entry> + <entry>This is an exclusive follower and only this file descriptor will receive + CEC messages for processing. If someone else is already the exclusive follower + then an attempt to become one will return the &EBUSY; error. You cannot become + a follower if <constant>CEC_CAP_TRANSMIT</constant> is not set or if + <constant>CEC_MODE_NO_INITIATOR</constant> was specified, &EINVAL; is returned + in that case.</entry> + </row> + <row> + <entry><constant>CEC_MODE_EXCL_FOLLOWER_PASSTHRU</constant></entry> + <entry>0x30</entry> + <entry>This is an exclusive follower and only this file descriptor will receive + CEC messages for processing. In addition it will put the CEC device into + passthrough mode, allowing the exclusive follower to handle most core messages + instead of relying on the CEC framework for that. If someone else is already the + exclusive follower then an attempt to become one will return the &EBUSY; error. + You cannot become a follower if <constant>CEC_CAP_TRANSMIT</constant> + is not set or if <constant>CEC_MODE_NO_INITIATOR</constant> was specified, + &EINVAL; is returned in that case.</entry> + </row> + <row> + <entry><constant>CEC_MODE_MONITOR</constant></entry> + <entry>0xe0</entry> + <entry>Put the file descriptor into monitor mode. Can only be used in combination + with <constant>CEC_MODE_NO_INITIATOR</constant>, otherwise &EINVAL; will be + returned. In monitor mode all messages this CEC device transmits and all messages + it receives (both broadcast messages and directed messages for one its logical + addresses) will be reported. This is very useful for debugging. This is only + allowed if the process has the <constant>CAP_NET_ADMIN</constant> + capability. If that is not set, then &EPERM; is returned.</entry> + </row> + <row> + <entry><constant>CEC_MODE_MONITOR_ALL</constant></entry> + <entry>0xf0</entry> + <entry>Put the file descriptor into 'monitor all' mode. Can only be used in combination + with <constant>CEC_MODE_NO_INITIATOR</constant>, otherwise &EINVAL; will be + returned. In 'monitor all' mode all messages this CEC device transmits and all messages + it receives, including directed messages for other CEC devices will be reported. This + is very useful for debugging, but not all devices support this. This mode requires that + the <constant>CEC_CAP_MONITOR_ALL</constant> capability is set, otherwise &EINVAL; is + returned. This is only allowed if the process has the <constant>CAP_NET_ADMIN</constant> + capability. If that is not set, then &EPERM; is returned.</entry> + </row> + </tbody> + </tgroup> + </table> + + <para>Core message processing details:</para> + + <table pgwide="1" frame="none" id="cec-core-processing"> + <title>Core Message Processing</title> + <tgroup cols="2"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_MSG_GET_CEC_VERSION</constant></entry> + <entry>When in passthrough mode this message has to be handled by userspace, + otherwise the core will return the CEC version that was set with &CEC-ADAP-S-LOG-ADDRS;.</entry> + </row> + <row> + <entry><constant>CEC_MSG_GIVE_DEVICE_VENDOR_ID</constant></entry> + <entry>When in passthrough mode this message has to be handled by userspace, + otherwise the core will return the vendor ID that was set with &CEC-ADAP-S-LOG-ADDRS;.</entry> + </row> + <row> + <entry><constant>CEC_MSG_ABORT</constant></entry> + <entry>When in passthrough mode this message has to be handled by userspace, + otherwise the core will return a feature refused message as per the specification.</entry> + </row> + <row> + <entry><constant>CEC_MSG_GIVE_PHYSICAL_ADDR</constant></entry> + <entry>When in passthrough mode this message has to be handled by userspace, + otherwise the core will report the current physical address.</entry> + </row> + <row> + <entry><constant>CEC_MSG_GIVE_OSD_NAME</constant></entry> + <entry>When in passthrough mode this message has to be handled by userspace, + otherwise the core will report the current OSD name as was set with + &CEC-ADAP-S-LOG-ADDRS;.</entry> + </row> + <row> + <entry><constant>CEC_MSG_GIVE_FEATURES</constant></entry> + <entry>When in passthrough mode this message has to be handled by userspace, + otherwise the core will report the current features as was set with + &CEC-ADAP-S-LOG-ADDRS; or the message is ignore if the CEC version was + older than 2.0.</entry> + </row> + <row> + <entry><constant>CEC_MSG_USER_CONTROL_PRESSED</constant></entry> + <entry>If <constant>CEC_CAP_RC</constant> is set, then generate a remote control + key press. This message is always passed on to userspace.</entry> + </row> + <row> + <entry><constant>CEC_MSG_USER_CONTROL_RELEASED</constant></entry> + <entry>If <constant>CEC_CAP_RC</constant> is set, then generate a remote control + key release. This message is always passed on to userspace.</entry> + </row> + <row> + <entry><constant>CEC_MSG_REPORT_PHYSICAL_ADDR</constant></entry> + <entry>The CEC framework will make note of the reported physical address + and then just pass the message on to userspace.</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-ioc-receive.xml b/Documentation/DocBook/media/v4l/cec-ioc-receive.xml new file mode 100644 index 000000000000..fde9f8678e67 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-receive.xml @@ -0,0 +1,274 @@ +<refentry id="cec-ioc-receive"> + <refmeta> + <refentrytitle>ioctl CEC_RECEIVE, CEC_TRANSMIT</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>CEC_RECEIVE</refname> + <refname>CEC_TRANSMIT</refname> + <refpurpose>Receive or transmit a CEC message</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct cec_msg *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>File descriptor returned by + <link linkend='cec-func-open'><function>open()</function></link>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>CEC_RECEIVE, CEC_TRANSMIT</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para> + Note: this documents the proposed CEC API. This API is not yet finalized and + is currently only available as a staging kernel module. + </para> + + <para>To receive a CEC message the application has to fill in the + <structname>cec_msg</structname> structure and pass it to the + <constant>CEC_RECEIVE</constant> ioctl. <constant>CEC_RECEIVE</constant> is + only available if <constant>CEC_CAP_RECEIVE</constant> is set. If the + file descriptor is in non-blocking mode and there are no received + messages pending, then it will return -1 and set errno to the &EAGAIN;. + If the file descriptor is in blocking mode and <structfield>timeout</structfield> + is non-zero and no message arrived within <structfield>timeout</structfield> + milliseconds, then it will return -1 and set errno to the &ETIMEDOUT;.</para> + + <para>To send a CEC message the application has to fill in the + <structname>cec_msg</structname> structure and pass it to the + <constant>CEC_TRANSMIT</constant> ioctl. <constant>CEC_TRANSMIT</constant> is + only available if <constant>CEC_CAP_TRANSMIT</constant> is set. + If there is no more room in the transmit queue, then it will return + -1 and set errno to the &EBUSY;.</para> + + <table pgwide="1" frame="none" id="cec-msg"> + <title>struct <structname>cec_msg</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u64</entry> + <entry><structfield>ts</structfield></entry> + <entry>Timestamp of when the message was transmitted in ns in the case + of <constant>CEC_TRANSMIT</constant> with <structfield>reply</structfield> + set to 0, or the timestamp of the received message in all other cases.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>len</structfield></entry> + <entry>The length of the message. For <constant>CEC_TRANSMIT</constant> this + is filled in by the application. The driver will fill this in for + <constant>CEC_RECEIVE</constant> and for <constant>CEC_TRANSMIT</constant> + it will be filled in with the length of the reply message if + <structfield>reply</structfield> was set.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>timeout</structfield></entry> + <entry>The timeout in milliseconds. This is the time the device will wait for a message to + be received before timing out. If it is set to 0, then it will wait indefinitely when it + is called by <constant>CEC_RECEIVE</constant>. If it is 0 and it is called by + <constant>CEC_TRANSMIT</constant>, then it will be replaced by 1000 if the + <structfield>reply</structfield> is non-zero or ignored if <structfield>reply</structfield> + is 0.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>sequence</structfield></entry> + <entry>The sequence number is automatically assigned by the CEC + framework for all transmitted messages. It can be later used by the + framework to generate an event if a reply for a message was + requested and the message was transmitted in a non-blocking mode. + </entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>flags</structfield></entry> + <entry>Flags. No flags are defined yet, so set this to 0.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>rx_status</structfield></entry> + <entry>The status bits of the received message. See <xref linkend="cec-rx-status" /> + for the possible status values. It is 0 if this message was transmitted, not + received, unless this is the reply to a transmitted message. In that case both + <structfield>rx_status</structfield> and <structfield>tx_status</structfield> + are set.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>tx_status</structfield></entry> + <entry>The status bits of the transmitted message. See <xref linkend="cec-tx-status" /> + for the possible status values. It is 0 if this messages was received, not + transmitted.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>msg</structfield>[16]</entry> + <entry>The message payload. For <constant>CEC_TRANSMIT</constant> this + is filled in by the application. The driver will fill this in for + <constant>CEC_RECEIVE</constant> and for <constant>CEC_TRANSMIT</constant> + it will be filled in with the payload of the reply message if + <structfield>reply</structfield> was set.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>reply</structfield></entry> + <entry>Wait until this message is replied. If <structfield>reply</structfield> + is 0 and the <structfield>timeout</structfield> is 0, then don't wait for a reply but + return after transmitting the message. If there was an error as indicated by a non-zero + <structfield>tx_status</structfield> field, then <structfield>reply</structfield> and + <structfield>timeout</structfield> are both set to 0 by the driver. Ignored by + <constant>CEC_RECEIVE</constant>. The case where <structfield>reply</structfield> is 0 + (this is the opcode for the Feature Abort message) and <structfield>timeout</structfield> + is non-zero is specifically allowed to send a message and wait up to <structfield>timeout</structfield> + milliseconds for a Feature Abort reply. In this case <structfield>rx_status</structfield> + will either be set to <constant>CEC_RX_STATUS_TIMEOUT</constant> or + <constant>CEC_RX_STATUS_FEATURE_ABORT</constant>.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>tx_arb_lost_cnt</structfield></entry> + <entry>A counter of the number of transmit attempts that resulted in the + Arbitration Lost error. This is only set if the hardware supports this, otherwise + it is always 0. This counter is only valid if the <constant>CEC_TX_STATUS_ARB_LOST</constant> + status bit is set.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>tx_nack_cnt</structfield></entry> + <entry>A counter of the number of transmit attempts that resulted in the + Not Acknowledged error. This is only set if the hardware supports this, otherwise + it is always 0. This counter is only valid if the <constant>CEC_TX_STATUS_NACK</constant> + status bit is set.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>tx_low_drive_cnt</structfield></entry> + <entry>A counter of the number of transmit attempts that resulted in the + Arbitration Lost error. This is only set if the hardware supports this, otherwise + it is always 0. This counter is only valid if the <constant>CEC_TX_STATUS_LOW_DRIVE</constant> + status bit is set.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>tx_error_cnt</structfield></entry> + <entry>A counter of the number of transmit errors other than Arbitration Lost + or Not Acknowledged. This is only set if the hardware supports this, otherwise + it is always 0. This counter is only valid if the <constant>CEC_TX_STATUS_ERROR</constant> + status bit is set.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="cec-tx-status"> + <title>CEC Transmit Status</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_TX_STATUS_OK</constant></entry> + <entry>0x01</entry> + <entry>The message was transmitted successfully. This is mutually exclusive with + <constant>CEC_TX_STATUS_MAX_RETRIES</constant>. Other bits can still be set if + earlier attempts met with failure before the transmit was eventually successful.</entry> + </row> + <row> + <entry><constant>CEC_TX_STATUS_ARB_LOST</constant></entry> + <entry>0x02</entry> + <entry>CEC line arbitration was lost.</entry> + </row> + <row> + <entry><constant>CEC_TX_STATUS_NACK</constant></entry> + <entry>0x04</entry> + <entry>Message was not acknowledged.</entry> + </row> + <row> + <entry><constant>CEC_TX_STATUS_LOW_DRIVE</constant></entry> + <entry>0x08</entry> + <entry>Low drive was detected on the CEC bus. This indicates that a follower + detected an error on the bus and requests a retransmission.</entry> + </row> + <row> + <entry><constant>CEC_TX_STATUS_ERROR</constant></entry> + <entry>0x10</entry> + <entry>Some error occurred. This is used for any errors that do not + fit the previous two, either because the hardware could not tell + which error occurred, or because the hardware tested for other conditions + besides those two.</entry> + </row> + <row> + <entry><constant>CEC_TX_STATUS_MAX_RETRIES</constant></entry> + <entry>0x20</entry> + <entry>The transmit failed after one or more retries. This status bit is mutually + exclusive with <constant>CEC_TX_STATUS_OK</constant>. Other bits can still be set + to explain which failures were seen.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="cec-rx-status"> + <title>CEC Receive Status</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_RX_STATUS_OK</constant></entry> + <entry>0x01</entry> + <entry>The message was received successfully.</entry> + </row> + <row> + <entry><constant>CEC_RX_STATUS_TIMEOUT</constant></entry> + <entry>0x02</entry> + <entry>The reply to an earlier transmitted message timed out.</entry> + </row> + <row> + <entry><constant>CEC_RX_STATUS_FEATURE_ABORT</constant></entry> + <entry>0x04</entry> + <entry>The message was received successfully but the reply was + <constant>CEC_MSG_FEATURE_ABORT</constant>. This status is only + set if this message was the reply to an earlier transmitted + message.</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/fdl-appendix.xml b/Documentation/DocBook/media/v4l/fdl-appendix.xml index ae22394ba997..71299a3897c4 100644 --- a/Documentation/DocBook/media/v4l/fdl-appendix.xml +++ b/Documentation/DocBook/media/v4l/fdl-appendix.xml @@ -526,7 +526,7 @@ <para> You may extract a single document from such a collection, and - dispbibute it individually under this License, provided you + distribute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document. diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml index e09025db92bd..21a3dde8f95d 100644 --- a/Documentation/DocBook/media/v4l/io.xml +++ b/Documentation/DocBook/media/v4l/io.xml @@ -88,7 +88,7 @@ function.<footnote> <structfield>capabilities</structfield> field of &v4l2-capability; returned by the &VIDIOC-QUERYCAP; ioctl is set. There are two streaming methods, to determine if the memory mapping flavor is -supported applications must call the &VIDIOC-REQBUFS; ioctl.</para> +supported applications must call the &VIDIOC-REQBUFS; ioctl with the memory type set to <constant>V4L2_MEMORY_MMAP</constant>.</para> <para>Streaming is an I/O method where only pointers to buffers are exchanged between application and driver, the data itself is not @@ -369,7 +369,7 @@ rest should be evident.</para> <structfield>capabilities</structfield> field of &v4l2-capability; returned by the &VIDIOC-QUERYCAP; ioctl is set. If the particular user pointer method (not only memory mapping) is supported must be -determined by calling the &VIDIOC-REQBUFS; ioctl.</para> +determined by calling the &VIDIOC-REQBUFS; ioctl with the memory type set to <constant>V4L2_MEMORY_USERPTR</constant>.</para> <para>This I/O method combines advantages of the read/write and memory mapping methods. Buffers (planes) are allocated by the application diff --git a/Documentation/DocBook/media/v4l/lirc_device_interface.xml b/Documentation/DocBook/media/v4l/lirc_device_interface.xml index 34cada2ca710..f53ad58027a7 100644 --- a/Documentation/DocBook/media/v4l/lirc_device_interface.xml +++ b/Documentation/DocBook/media/v4l/lirc_device_interface.xml @@ -114,7 +114,7 @@ on working with the default settings initially.</para> <para>Some receiver have maximum resolution which is defined by internal sample rate or data format limitations. E.g. it's common that signals can only be reported in 50 microsecond steps. This integer value is used by - lircd to automatically adjust the aeps tolerance value in the lircd + lircd to automatically adjust the steps tolerance value in the lircd config file.</para> </listitem> </varlistentry> @@ -157,7 +157,7 @@ on working with the default settings initially.</para> <varlistentry> <term>LIRC_SET_{SEND,REC}_CARRIER</term> <listitem> - <para>Set send/receive carrier (in Hz).</para> + <para>Set send/receive carrier (in Hz). Return 0 on success.</para> </listitem> </varlistentry> <varlistentry> diff --git a/Documentation/DocBook/media/v4l/media-types.xml b/Documentation/DocBook/media/v4l/media-types.xml index 5e3f20fdcf17..95aa1f9c836a 100644 --- a/Documentation/DocBook/media/v4l/media-types.xml +++ b/Documentation/DocBook/media/v4l/media-types.xml @@ -121,6 +121,70 @@ <entry><constant>MEDIA_ENT_F_AUDIO_MIXER</constant></entry> <entry>Audio Mixer Function Entity.</entry> </row> + <row> + <entry><constant>MEDIA_ENT_F_PROC_VIDEO_COMPOSER</constant></entry> + <entry>Video composer (blender). An entity capable of video + composing must have at least two sink pads and one source + pad, and composes input video frames onto output video + frames. Composition can be performed using alpha blending, + color keying, raster operations (ROP), stitching or any other + means. + </entry> + </row> + <row> + <entry><constant>MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER</constant></entry> + <entry>Video pixel formatter. An entity capable of pixel formatting + must have at least one sink pad and one source pad. Read + pixel formatters read pixels from memory and perform a subset + of unpacking, cropping, color keying, alpha multiplication + and pixel encoding conversion. Write pixel formatters perform + a subset of dithering, pixel encoding conversion and packing + and write pixels to memory. + </entry> + </row> + <row> + <entry><constant>MEDIA_ENT_F_PROC_VIDEO_PIXEL_ENC_CONV</constant></entry> + <entry>Video pixel encoding converter. An entity capable of pixel + enconding conversion must have at least one sink pad and one + source pad, and convert the encoding of pixels received on + its sink pad(s) to a different encoding output on its source + pad(s). Pixel encoding conversion includes but isn't limited + to RGB to/from HSV, RGB to/from YUV and CFA (Bayer) to RGB + conversions. + </entry> + </row> + <row> + <entry><constant>MEDIA_ENT_F_PROC_VIDEO_LUT</constant></entry> + <entry>Video look-up table. An entity capable of video lookup table + processing must have one sink pad and one source pad. It uses + the values of the pixels received on its sink pad to look up + entries in internal tables and output them on its source pad. + The lookup processing can be performed on all components + separately or combine them for multi-dimensional table + lookups. + </entry> + </row> + <row> + <entry><constant>MEDIA_ENT_F_PROC_VIDEO_SCALER</constant></entry> + <entry>Video scaler. An entity capable of video scaling must have + at least one sink pad and one source pad, and scale the + video frame(s) received on its sink pad(s) to a different + resolution output on its source pad(s). The range of + supported scaling ratios is entity-specific and can differ + between the horizontal and vertical directions (in particular + scaling can be supported in one direction only). Binning and + skipping are considered as scaling. + </entry> + </row> + <row> + <entry><constant>MEDIA_ENT_F_PROC_VIDEO_STATISTICS</constant></entry> + <entry>Video statistics computation (histogram, 3A, ...). An entity + capable of statistics computation must have one sink pad and + one source pad. It computes statistics over the frames + received on its sink pad and outputs the statistics data on + its source pad. + </entry> + </row> </tbody> </tgroup> </table> diff --git a/Documentation/DocBook/media/v4l/pixfmt-z16.xml b/Documentation/DocBook/media/v4l/pixfmt-z16.xml index 3d87e4bf87b8..1d9cb1684bd3 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-z16.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-z16.xml @@ -5,7 +5,7 @@ </refmeta> <refnamediv> <refname><constant>V4L2_PIX_FMT_Z16</constant></refname> - <refpurpose>Interleaved grey-scale image, e.g. from a stereo-pair</refpurpose> + <refpurpose>16-bit depth data with distance values at each pixel</refpurpose> </refnamediv> <refsect1> <title>Description</title> diff --git a/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml b/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml index 0f193fda0470..6f529e100ea4 100644 --- a/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml +++ b/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml @@ -6,7 +6,7 @@ <refnamediv> <refname>VIDIOC_REQBUFS</refname> - <refpurpose>Initiate Memory Mapping or User Pointer I/O</refpurpose> + <refpurpose>Initiate Memory Mapping, User Pointer or DMA Buffer I/O</refpurpose> </refnamediv> <refsynopsisdiv> diff --git a/Documentation/DocBook/media_api.tmpl b/Documentation/DocBook/media_api.tmpl index 7b77e0f7b87d..a2765d8ad05c 100644 --- a/Documentation/DocBook/media_api.tmpl +++ b/Documentation/DocBook/media_api.tmpl @@ -75,7 +75,7 @@ </mediaobject> </figure> <para>The media infrastructure API was designed to control such - devices. It is divided into four parts.</para> + devices. It is divided into five parts.</para> <para>The first part covers radio, video capture and output, cameras, analog TV devices and codecs.</para> <para>The second part covers the @@ -87,6 +87,7 @@ <xref linkend="fe-delivery-system-t" />.</para> <para>The third part covers the Remote Controller API.</para> <para>The fourth part covers the Media Controller API.</para> + <para>The fifth part covers the CEC (Consumer Electronics Control) API.</para> <para>It should also be noted that a media device may also have audio components, like mixers, PCM capture, PCM playback, etc, which are controlled via ALSA API.</para> @@ -107,6 +108,9 @@ <part id="media_common"> &sub-media-controller; </part> +<part id="cec"> +&sub-cec-api; +</part> <chapter id="gen_errors"> &sub-gen-errors; |