diff options
Diffstat (limited to 'Documentation/admin-guide/device-mapper/dm-raid.rst')
| -rw-r--r-- | Documentation/admin-guide/device-mapper/dm-raid.rst | 419 |
1 files changed, 419 insertions, 0 deletions
diff --git a/Documentation/admin-guide/device-mapper/dm-raid.rst b/Documentation/admin-guide/device-mapper/dm-raid.rst new file mode 100644 index 000000000000..2fe255b130fb --- /dev/null +++ b/Documentation/admin-guide/device-mapper/dm-raid.rst @@ -0,0 +1,419 @@ +======= +dm-raid +======= + +The device-mapper RAID (dm-raid) target provides a bridge from DM to MD. +It allows the MD RAID drivers to be accessed using a device-mapper +interface. + + +Mapping Table Interface +----------------------- +The target is named "raid" and it accepts the following parameters:: + + <raid_type> <#raid_params> <raid_params> \ + <#raid_devs> <metadata_dev0> <dev0> [.. <metadata_devN> <devN>] + +<raid_type>: + + ============= =============================================================== + raid0 RAID0 striping (no resilience) + raid1 RAID1 mirroring + raid4 RAID4 with dedicated last parity disk + raid5_n RAID5 with dedicated last parity disk supporting takeover + Same as raid4 + + - Transitory layout + raid5_la RAID5 left asymmetric + + - rotating parity 0 with data continuation + raid5_ra RAID5 right asymmetric + + - rotating parity N with data continuation + raid5_ls RAID5 left symmetric + + - rotating parity 0 with data restart + raid5_rs RAID5 right symmetric + + - rotating parity N with data restart + raid6_zr RAID6 zero restart + + - rotating parity zero (left-to-right) with data restart + raid6_nr RAID6 N restart + + - rotating parity N (right-to-left) with data restart + raid6_nc RAID6 N continue + + - rotating parity N (right-to-left) with data continuation + raid6_n_6 RAID6 with dedicate parity disks + + - parity and Q-syndrome on the last 2 disks; + layout for takeover from/to raid4/raid5_n + raid6_la_6 Same as "raid_la" plus dedicated last Q-syndrome disk + + - layout for takeover from raid5_la from/to raid6 + raid6_ra_6 Same as "raid5_ra" dedicated last Q-syndrome disk + + - layout for takeover from raid5_ra from/to raid6 + raid6_ls_6 Same as "raid5_ls" dedicated last Q-syndrome disk + + - layout for takeover from raid5_ls from/to raid6 + raid6_rs_6 Same as "raid5_rs" dedicated last Q-syndrome disk + + - layout for takeover from raid5_rs from/to raid6 + raid10 Various RAID10 inspired algorithms chosen by additional params + (see raid10_format and raid10_copies below) + + - RAID10: Striped Mirrors (aka 'Striping on top of mirrors') + - RAID1E: Integrated Adjacent Stripe Mirroring + - RAID1E: Integrated Offset Stripe Mirroring + - and other similar RAID10 variants + ============= =============================================================== + + Reference: Chapter 4 of + http://www.snia.org/sites/default/files/SNIA_DDF_Technical_Position_v2.0.pdf + +<#raid_params>: The number of parameters that follow. + +<raid_params> consists of + + Mandatory parameters: + <chunk_size>: + Chunk size in sectors. This parameter is often known as + "stripe size". It is the only mandatory parameter and + is placed first. + + followed by optional parameters (in any order): + [sync|nosync] + Force or prevent RAID initialization. + + [rebuild <idx>] + Rebuild drive number 'idx' (first drive is 0). + + [daemon_sleep <ms>] + Interval between runs of the bitmap daemon that + clear bits. A longer interval means less bitmap I/O but + resyncing after a failure is likely to take longer. + + [min_recovery_rate <kB/sec/disk>] + Throttle RAID initialization + [max_recovery_rate <kB/sec/disk>] + Throttle RAID initialization + [write_mostly <idx>] + Mark drive index 'idx' write-mostly. + [max_write_behind <sectors>] + See '--write-behind=' (man mdadm) + [stripe_cache <sectors>] + Stripe cache size (RAID 4/5/6 only) + [region_size <sectors>] + The region_size multiplied by the number of regions is the + logical size of the array. The bitmap records the device + synchronisation state for each region. + + [raid10_copies <# copies>], [raid10_format <near|far|offset>] + These two options are used to alter the default layout of + a RAID10 configuration. The number of copies is can be + specified, but the default is 2. There are also three + variations to how the copies are laid down - the default + is "near". Near copies are what most people think of with + respect to mirroring. If these options are left unspecified, + or 'raid10_copies 2' and/or 'raid10_format near' are given, + then the layouts for 2, 3 and 4 devices are: + + ======== ========== ============== + 2 drives 3 drives 4 drives + ======== ========== ============== + A1 A1 A1 A1 A2 A1 A1 A2 A2 + A2 A2 A2 A3 A3 A3 A3 A4 A4 + A3 A3 A4 A4 A5 A5 A5 A6 A6 + A4 A4 A5 A6 A6 A7 A7 A8 A8 + .. .. .. .. .. .. .. .. .. + ======== ========== ============== + + The 2-device layout is equivalent 2-way RAID1. The 4-device + layout is what a traditional RAID10 would look like. The + 3-device layout is what might be called a 'RAID1E - Integrated + Adjacent Stripe Mirroring'. + + If 'raid10_copies 2' and 'raid10_format far', then the layouts + for 2, 3 and 4 devices are: + + ======== ============ =================== + 2 drives 3 drives 4 drives + ======== ============ =================== + A1 A2 A1 A2 A3 A1 A2 A3 A4 + A3 A4 A4 A5 A6 A5 A6 A7 A8 + A5 A6 A7 A8 A9 A9 A10 A11 A12 + .. .. .. .. .. .. .. .. .. + A2 A1 A3 A1 A2 A2 A1 A4 A3 + A4 A3 A6 A4 A5 A6 A5 A8 A7 + A6 A5 A9 A7 A8 A10 A9 A12 A11 + .. .. .. .. .. .. .. .. .. + ======== ============ =================== + + If 'raid10_copies 2' and 'raid10_format offset', then the + layouts for 2, 3 and 4 devices are: + + ======== ========== ================ + 2 drives 3 drives 4 drives + ======== ========== ================ + A1 A2 A1 A2 A3 A1 A2 A3 A4 + A2 A1 A3 A1 A2 A2 A1 A4 A3 + A3 A4 A4 A5 A6 A5 A6 A7 A8 + A4 A3 A6 A4 A5 A6 A5 A8 A7 + A5 A6 A7 A8 A9 A9 A10 A11 A12 + A6 A5 A9 A7 A8 A10 A9 A12 A11 + .. .. .. .. .. .. .. .. .. + ======== ========== ================ + + Here we see layouts closely akin to 'RAID1E - Integrated + Offset Stripe Mirroring'. + + [delta_disks <N>] + The delta_disks option value (-251 < N < +251) triggers + device removal (negative value) or device addition (positive + value) to any reshape supporting raid levels 4/5/6 and 10. + RAID levels 4/5/6 allow for addition of devices (metadata + and data device tuple), raid10_near and raid10_offset only + allow for device addition. raid10_far does not support any + reshaping at all. + A minimum of devices have to be kept to enforce resilience, + which is 3 devices for raid4/5 and 4 devices for raid6. + + [data_offset <sectors>] + This option value defines the offset into each data device + where the data starts. This is used to provide out-of-place + reshaping space to avoid writing over data while + changing the layout of stripes, hence an interruption/crash + may happen at any time without the risk of losing data. + E.g. when adding devices to an existing raid set during + forward reshaping, the out-of-place space will be allocated + at the beginning of each raid device. The kernel raid4/5/6/10 + MD personalities supporting such device addition will read the data from + the existing first stripes (those with smaller number of stripes) + starting at data_offset to fill up a new stripe with the larger + number of stripes, calculate the redundancy blocks (CRC/Q-syndrome) + and write that new stripe to offset 0. Same will be applied to all + N-1 other new stripes. This out-of-place scheme is used to change + the RAID type (i.e. the allocation algorithm) as well, e.g. + changing from raid5_ls to raid5_n. + + [journal_dev <dev>] + This option adds a journal device to raid4/5/6 raid sets and + uses it to close the 'write hole' caused by the non-atomic updates + to the component devices which can cause data loss during recovery. + The journal device is used as writethrough thus causing writes to + be throttled versus non-journaled raid4/5/6 sets. + Takeover/reshape is not possible with a raid4/5/6 journal device; + it has to be deconfigured before requesting these. + + [journal_mode <mode>] + This option sets the caching mode on journaled raid4/5/6 raid sets + (see 'journal_dev <dev>' above) to 'writethrough' or 'writeback'. + If 'writeback' is selected the journal device has to be resilient + and must not suffer from the 'write hole' problem itself (e.g. use + raid1 or raid10) to avoid a single point of failure. + +<#raid_devs>: The number of devices composing the array. + Each device consists of two entries. The first is the device + containing the metadata (if any); the second is the one containing the + data. A Maximum of 64 metadata/data device entries are supported + up to target version 1.8.0. + 1.9.0 supports up to 253 which is enforced by the used MD kernel runtime. + + If a drive has failed or is missing at creation time, a '-' can be + given for both the metadata and data drives for a given position. + + +Example Tables +-------------- + +:: + + # RAID4 - 4 data drives, 1 parity (no metadata devices) + # No metadata devices specified to hold superblock/bitmap info + # Chunk size of 1MiB + # (Lines separated for easy reading) + + 0 1960893648 raid \ + raid4 1 2048 \ + 5 - 8:17 - 8:33 - 8:49 - 8:65 - 8:81 + + # RAID4 - 4 data drives, 1 parity (with metadata devices) + # Chunk size of 1MiB, force RAID initialization, + # min recovery rate at 20 kiB/sec/disk + + 0 1960893648 raid \ + raid4 4 2048 sync min_recovery_rate 20 \ + 5 8:17 8:18 8:33 8:34 8:49 8:50 8:65 8:66 8:81 8:82 + + +Status Output +------------- +'dmsetup table' displays the table used to construct the mapping. +The optional parameters are always printed in the order listed +above with "sync" or "nosync" always output ahead of the other +arguments, regardless of the order used when originally loading the table. +Arguments that can be repeated are ordered by value. + + +'dmsetup status' yields information on the state and health of the array. +The output is as follows (normally a single line, but expanded here for +clarity):: + + 1: <s> <l> raid \ + 2: <raid_type> <#devices> <health_chars> \ + 3: <sync_ratio> <sync_action> <mismatch_cnt> + +Line 1 is the standard output produced by device-mapper. + +Line 2 & 3 are produced by the raid target and are best explained by example:: + + 0 1960893648 raid raid4 5 AAAAA 2/490221568 init 0 + +Here we can see the RAID type is raid4, there are 5 devices - all of +which are 'A'live, and the array is 2/490221568 complete with its initial +recovery. Here is a fuller description of the individual fields: + + =============== ========================================================= + <raid_type> Same as the <raid_type> used to create the array. + <health_chars> One char for each device, indicating: + + - 'A' = alive and in-sync + - 'a' = alive but not in-sync + - 'D' = dead/failed. + <sync_ratio> The ratio indicating how much of the array has undergone + the process described by 'sync_action'. If the + 'sync_action' is "check" or "repair", then the process + of "resync" or "recover" can be considered complete. + <sync_action> One of the following possible states: + + idle + - No synchronization action is being performed. + frozen + - The current action has been halted. + resync + - Array is undergoing its initial synchronization + or is resynchronizing after an unclean shutdown + (possibly aided by a bitmap). + recover + - A device in the array is being rebuilt or + replaced. + check + - A user-initiated full check of the array is + being performed. All blocks are read and + checked for consistency. The number of + discrepancies found are recorded in + <mismatch_cnt>. No changes are made to the + array by this action. + repair + - The same as "check", but discrepancies are + corrected. + reshape + - The array is undergoing a reshape. + <mismatch_cnt> The number of discrepancies found between mirror copies + in RAID1/10 or wrong parity values found in RAID4/5/6. + This value is valid only after a "check" of the array + is performed. A healthy array has a 'mismatch_cnt' of 0. + <data_offset> The current data offset to the start of the user data on + each component device of a raid set (see the respective + raid parameter to support out-of-place reshaping). + <journal_char> - 'A' - active write-through journal device. + - 'a' - active write-back journal device. + - 'D' - dead journal device. + - '-' - no journal device. + =============== ========================================================= + + +Message Interface +----------------- +The dm-raid target will accept certain actions through the 'message' interface. +('man dmsetup' for more information on the message interface.) These actions +include: + + ========= ================================================ + "idle" Halt the current sync action. + "frozen" Freeze the current sync action. + "resync" Initiate/continue a resync. + "recover" Initiate/continue a recover process. + "check" Initiate a check (i.e. a "scrub") of the array. + "repair" Initiate a repair of the array. + ========= ================================================ + + +Discard Support +--------------- +The implementation of discard support among hardware vendors varies. +When a block is discarded, some storage devices will return zeroes when +the block is read. These devices set the 'discard_zeroes_data' +attribute. Other devices will return random data. Confusingly, some +devices that advertise 'discard_zeroes_data' will not reliably return +zeroes when discarded blocks are read! Since RAID 4/5/6 uses blocks +from a number of devices to calculate parity blocks and (for performance +reasons) relies on 'discard_zeroes_data' being reliable, it is important +that the devices be consistent. Blocks may be discarded in the middle +of a RAID 4/5/6 stripe and if subsequent read results are not +consistent, the parity blocks may be calculated differently at any time; +making the parity blocks useless for redundancy. It is important to +understand how your hardware behaves with discards if you are going to +enable discards with RAID 4/5/6. + +Since the behavior of storage devices is unreliable in this respect, +even when reporting 'discard_zeroes_data', by default RAID 4/5/6 +discard support is disabled -- this ensures data integrity at the +expense of losing some performance. + +Storage devices that properly support 'discard_zeroes_data' are +increasingly whitelisted in the kernel and can thus be trusted. + +For trusted devices, the following dm-raid module parameter can be set +to safely enable discard support for RAID 4/5/6: + + 'devices_handle_discards_safely' + + +Version History +--------------- + +:: + + 1.0.0 Initial version. Support for RAID 4/5/6 + 1.1.0 Added support for RAID 1 + 1.2.0 Handle creation of arrays that contain failed devices. + 1.3.0 Added support for RAID 10 + 1.3.1 Allow device replacement/rebuild for RAID 10 + 1.3.2 Fix/improve redundancy checking for RAID10 + 1.4.0 Non-functional change. Removes arg from mapping function. + 1.4.1 RAID10 fix redundancy validation checks (commit 55ebbb5). + 1.4.2 Add RAID10 "far" and "offset" algorithm support. + 1.5.0 Add message interface to allow manipulation of the sync_action. + New status (STATUSTYPE_INFO) fields: sync_action and mismatch_cnt. + 1.5.1 Add ability to restore transiently failed devices on resume. + 1.5.2 'mismatch_cnt' is zero unless [last_]sync_action is "check". + 1.6.0 Add discard support (and devices_handle_discard_safely module param). + 1.7.0 Add support for MD RAID0 mappings. + 1.8.0 Explicitly check for compatible flags in the superblock metadata + and reject to start the raid set if any are set by a newer + target version, thus avoiding data corruption on a raid set + with a reshape in progress. + 1.9.0 Add support for RAID level takeover/reshape/region size + and set size reduction. + 1.9.1 Fix activation of existing RAID 4/10 mapped devices + 1.9.2 Don't emit '- -' on the status table line in case the constructor + fails reading a superblock. Correctly emit 'maj:min1 maj:min2' and + 'D' on the status line. If '- -' is passed into the constructor, emit + '- -' on the table line and '-' as the status line health character. + 1.10.0 Add support for raid4/5/6 journal device + 1.10.1 Fix data corruption on reshape request + 1.11.0 Fix table line argument order + (wrong raid10_copies/raid10_format sequence) + 1.11.1 Add raid4/5/6 journal write-back support via journal_mode option + 1.12.1 Fix for MD deadlock between mddev_suspend() and md_write_start() available + 1.13.0 Fix dev_health status at end of "recover" (was 'a', now 'A') + 1.13.1 Fix deadlock caused by early md_stop_writes(). Also fix size an + state races. + 1.13.2 Fix raid redundancy validation and avoid keeping raid set frozen + 1.14.0 Fix reshape race on small devices. Fix stripe adding reshape + deadlock/potential data corruption. Update superblock when + specific devices are requested via rebuild. Fix RAID leg + rebuild errors. |