diff options
Diffstat (limited to 'Documentation/admin-guide/kernel-parameters.txt')
| -rw-r--r-- | Documentation/admin-guide/kernel-parameters.txt | 34 |
1 files changed, 27 insertions, 7 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 8d676d2a48ac..15f79c27748d 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -972,7 +972,7 @@ A valid base address must be provided, and the serial port must already be setup and configured. - armada3700_uart,<addr> + ar3700_uart,<addr> Start an early, polled-mode console on the Armada 3700 serial port at the specified address. The serial port must already be setup @@ -1578,6 +1578,15 @@ extended tables themselves, and also PASID support. With this option set, extended tables will not be used even on hardware which claims to support them. + tboot_noforce [Default Off] + Do not force the Intel IOMMU enabled under tboot. + By default, tboot will force Intel IOMMU on, which + could harm performance of some high-throughput + devices like 40GBit network cards, even if identity + mapping is enabled. + Note that using this option lowers the security + provided by tboot because it makes the system + vulnerable to DMA attacks. intel_idle.max_cstate= [KNL,HW,ACPI,X86] 0 disables intel_idle and fall back on acpi_idle. @@ -1644,6 +1653,12 @@ nobypass [PPC/POWERNV] Disable IOMMU bypass, using IOMMU for PCI devices. + iommu.passthrough= + [ARM64] Configure DMA to bypass the IOMMU by default. + Format: { "0" | "1" } + 0 - Use IOMMU translation for DMA. + 1 - Bypass the IOMMU for DMA. + unset - Use IOMMU translation for DMA. io7= [HW] IO7 for Marvel based alpha systems See comment before marvel_specify_io7 in @@ -2419,12 +2434,6 @@ and gids from such clients. This is intended to ease migration from NFSv2/v3. - objlayoutdriver.osd_login_prog= - [NFS] [OBJLAYOUT] sets the pathname to the program which - is used to automatically discover and login into new - osd-targets. Please see: - Documentation/filesystems/pnfs.txt for more explanations - nmi_debug= [KNL,SH] Specify one or more actions to take when a NMI is triggered. Format: [state][,regs][,debounce][,die] @@ -3785,6 +3794,14 @@ spia_pedr= spia_peddr= + srcutree.exp_holdoff [KNL] + Specifies how many nanoseconds must elapse + since the end of the last SRCU grace period for + a given srcu_struct until the next normal SRCU + grace period will be considered for automatic + expediting. Set to zero to disable automatic + expediting. + stacktrace [FTRACE] Enabled the stack tracer on boot up. @@ -4127,6 +4144,9 @@ usbhid.mousepoll= [USBHID] The interval which mice are to be polled at. + usbhid.jspoll= + [USBHID] The interval which joysticks are to be polled at. + usb-storage.delay_use= [UMS] The delay in seconds before a new device is scanned for Logical Units (default 1). |