diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/admin-guide/sysctl/kernel.rst | 142 |
1 files changed, 76 insertions, 66 deletions
diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst index 0e486f41185e..98d1b198b2b4 100644 --- a/Documentation/admin-guide/sysctl/kernel.rst +++ b/Documentation/admin-guide/sysctl/kernel.rst @@ -38,8 +38,8 @@ acct If BSD-style process accounting is enabled these values control its behaviour. If free space on filesystem where the log lives -goes below ``lowwater``% accounting suspends. If free space gets -above ``highwater``% accounting resumes. ``frequency`` determines +goes below ``lowwater``\ % accounting suspends. If free space gets +above ``highwater``\ % accounting resumes. ``frequency`` determines how often do we check the amount of free space (value is in seconds). Default: @@ -65,6 +65,11 @@ combining the following values: 4 s3_beep = ======= +arch +==== + +The machine hardware name, the same output as ``uname -m`` +(e.g. ``x86_64`` or ``aarch64``). auto_msgmni =========== @@ -592,68 +597,59 @@ to the guest kernel command line (see Documentation/admin-guide/kernel-parameters.rst). -numa_balancing -============== - -Enables/disables automatic page fault based NUMA memory -balancing. Memory is moved automatically to nodes -that access it often. - -Enables/disables automatic NUMA memory balancing. On NUMA machines, there -is a performance penalty if remote memory is accessed by a CPU. When this -feature is enabled the kernel samples what task thread is accessing memory -by periodically unmapping pages and later trapping a page fault. At the -time of the page fault, it is determined if the data being accessed should -be migrated to a local memory node. +nmi_wd_lpm_factor (PPC only) +============================ -The unmapping of pages and trapping faults incur additional overhead that -ideally is offset by improved memory locality but there is no universal -guarantee. If the target workload is already bound to NUMA nodes then this -feature should be disabled. Otherwise, if the system overhead from the -feature is too high then the rate the kernel samples for NUMA hinting -faults may be controlled by the `numa_balancing_scan_period_min_ms, -numa_balancing_scan_delay_ms, numa_balancing_scan_period_max_ms, -numa_balancing_scan_size_mb`_, and numa_balancing_settle_count sysctls. +Factor to apply to the NMI watchdog timeout (only when ``nmi_watchdog`` is +set to 1). This factor represents the percentage added to +``watchdog_thresh`` when calculating the NMI watchdog timeout during an +LPM. The soft lockup timeout is not impacted. +A value of 0 means no change. The default value is 200 meaning the NMI +watchdog is set to 30s (based on ``watchdog_thresh`` equal to 10). -numa_balancing_scan_period_min_ms, numa_balancing_scan_delay_ms, numa_balancing_scan_period_max_ms, numa_balancing_scan_size_mb -=============================================================================================================================== +numa_balancing +============== -Automatic NUMA balancing scans tasks address space and unmaps pages to -detect if pages are properly placed or if the data should be migrated to a -memory node local to where the task is running. Every "scan delay" the task -scans the next "scan size" number of pages in its address space. When the -end of the address space is reached the scanner restarts from the beginning. +Enables/disables and configures automatic page fault based NUMA memory +balancing. Memory is moved automatically to nodes that access it often. +The value to set can be the result of ORing the following: -In combination, the "scan delay" and "scan size" determine the scan rate. -When "scan delay" decreases, the scan rate increases. The scan delay and -hence the scan rate of every task is adaptive and depends on historical -behaviour. If pages are properly placed then the scan delay increases, -otherwise the scan delay decreases. The "scan size" is not adaptive but -the higher the "scan size", the higher the scan rate. += ================================= +0 NUMA_BALANCING_DISABLED +1 NUMA_BALANCING_NORMAL +2 NUMA_BALANCING_MEMORY_TIERING += ================================= -Higher scan rates incur higher system overhead as page faults must be -trapped and potentially data must be migrated. However, the higher the scan -rate, the more quickly a tasks memory is migrated to a local node if the -workload pattern changes and minimises performance impact due to remote -memory accesses. These sysctls control the thresholds for scan delays and -the number of pages scanned. +Or NUMA_BALANCING_NORMAL to optimize page placement among different +NUMA nodes to reduce remote accessing. On NUMA machines, there is a +performance penalty if remote memory is accessed by a CPU. When this +feature is enabled the kernel samples what task thread is accessing +memory by periodically unmapping pages and later trapping a page +fault. At the time of the page fault, it is determined if the data +being accessed should be migrated to a local memory node. -``numa_balancing_scan_period_min_ms`` is the minimum time in milliseconds to -scan a tasks virtual memory. It effectively controls the maximum scanning -rate for each task. +The unmapping of pages and trapping faults incur additional overhead that +ideally is offset by improved memory locality but there is no universal +guarantee. If the target workload is already bound to NUMA nodes then this +feature should be disabled. -``numa_balancing_scan_delay_ms`` is the starting "scan delay" used for a task -when it initially forks. +Or NUMA_BALANCING_MEMORY_TIERING to optimize page placement among +different types of memory (represented as different NUMA nodes) to +place the hot pages in the fast memory. This is implemented based on +unmapping and page fault too. -``numa_balancing_scan_period_max_ms`` is the maximum time in milliseconds to -scan a tasks virtual memory. It effectively controls the minimum scanning -rate for each task. +numa_balancing_promote_rate_limit_MBps +====================================== -``numa_balancing_scan_size_mb`` is how many megabytes worth of pages are -scanned for a given scan. +Too high promotion/demotion throughput between different memory types +may hurt application latency. This can be used to rate limit the +promotion throughput. The per-node max promotion throughput in MB/s +will be limited to be no more than the set value. +A rule of thumb is to set this to less than 1/10 of the PMEM node +write bandwidth. oops_all_cpu_backtrace ====================== @@ -795,6 +791,8 @@ bit 1 print system memory info bit 2 print timer info bit 3 print locks info if ``CONFIG_LOCKDEP`` is on bit 4 print ftrace buffer +bit 5 print all printk messages in buffer +bit 6 print all CPUs backtrace (if available in the arch) ===== ============================================ So for example to print tasks and memory info on panic, user can:: @@ -813,6 +811,13 @@ is useful to define the root cause of RCU stalls using a vmcore. 1 panic() after printing RCU stall messages. = ============================================================ +max_rcu_stall_to_panic +====================== + +When ``panic_on_rcu_stall`` is set to 1, this value determines the +number of times that RCU can stall before panic() is called. + +When ``panic_on_rcu_stall`` is set to 0, this value is has no effect. perf_cpu_time_max_percent ========================= @@ -905,6 +910,17 @@ enabled, otherwise writing to this file will return ``-EBUSY``. The default value is 8. +perf_user_access (arm64 only) +================================= + +Controls user space access for reading perf event counters. When set to 1, +user space can read performance monitor counter registers directly. + +The default value is 0 (access disabled). + +See Documentation/arm64/perf.rst for more information. + + pid_max ======= @@ -1013,28 +1029,22 @@ This is a directory, with the following entries: * ``boot_id``: a UUID generated the first time this is retrieved, and unvarying after that; +* ``uuid``: a UUID generated every time this is retrieved (this can + thus be used to generate UUIDs at will); + * ``entropy_avail``: the pool's entropy count, in bits; * ``poolsize``: the entropy pool size, in bits; * ``urandom_min_reseed_secs``: obsolete (used to determine the minimum - number of seconds between urandom pool reseeding). - -* ``uuid``: a UUID generated every time this is retrieved (this can - thus be used to generate UUIDs at will); + number of seconds between urandom pool reseeding). This file is + writable for compatibility purposes, but writing to it has no effect + on any RNG behavior; * ``write_wakeup_threshold``: when the entropy count drops below this (as a number of bits), processes waiting to write to ``/dev/random`` - are woken up. - -If ``drivers/char/random.c`` is built with ``ADD_INTERRUPT_BENCH`` -defined, these additional entries are present: - -* ``add_interrupt_avg_cycles``: the average number of cycles between - interrupts used to feed the pool; - -* ``add_interrupt_avg_deviation``: the standard deviation seen on the - number of cycles between interrupts used to feed the pool. + are woken up. This file is writable for compatibility purposes, but + writing to it has no effect on any RNG behavior. randomize_va_space |