diff options
Diffstat (limited to 'Documentation/arm/SA1100/Itsy')
| -rw-r--r-- | Documentation/arm/SA1100/Itsy | 39 |
1 files changed, 0 insertions, 39 deletions
diff --git a/Documentation/arm/SA1100/Itsy b/Documentation/arm/SA1100/Itsy deleted file mode 100644 index 44b94997fa0d..000000000000 --- a/Documentation/arm/SA1100/Itsy +++ /dev/null @@ -1,39 +0,0 @@ -Itsy is a research project done by the Western Research Lab, and Systems -Research Center in Palo Alto, CA. The Itsy project is one of several -research projects at Compaq that are related to pocket computing. - -For more information, see: - - http://www.hpl.hp.com/downloads/crl/itsy/ - -Notes on initial 2.4 Itsy support (8/27/2000) : -The port was done on an Itsy version 1.5 machine with a daughtercard with -64 Meg of DRAM and 32 Meg of Flash. The initial work includes support for -serial console (to see what you're doing). No other devices have been -enabled. - -To build, do a "make menuconfig" (or xmenuconfig) and select Itsy support. -Disable Flash and LCD support. and then do a make zImage. -Finally, you will need to cd to arch/arm/boot/tools and execute a make there -to build the params-itsy program used to boot the kernel. - -In order to install the port of 2.4 to the itsy, You will need to set the -configuration parameters in the monitor as follows: -Arg 1:0x08340000, Arg2: 0xC0000000, Arg3:18 (0x12), Arg4:0 -Make sure the start-routine address is set to 0x00060000. - -Next, flash the params-itsy program to 0x00060000 ("p 1 0x00060000" in the -flash menu) Flash the kernel in arch/arm/boot/zImage into 0x08340000 -("p 1 0x00340000"). Finally flash an initial ramdisk into 0xC8000000 -("p 2 0x0") We used ramdisk-2-30.gz from the 0.11 version directory on -handhelds.org. - -The serial connection we established was at: - 8-bit data, no parity, 1 stop bit(s), 115200.00 b/s. in the monitor, in the -params-itsy program, and in the kernel itself. This can be changed, but -not easily. The monitor parameters are easily changed, the params program -setup is assembly outl's, and the kernel is a configuration item specific to -the itsy. (i.e. grep for CONFIG_SA1100_ITSY and you'll find where it is.) - - -This should get you a properly booting 2.4 kernel on the itsy. |