diff options
Diffstat (limited to 'Documentation/arm/Samsung-S3C24XX')
| -rw-r--r-- | Documentation/arm/Samsung-S3C24XX/GPIO.txt | 2 | ||||
| -rw-r--r-- | Documentation/arm/Samsung-S3C24XX/Overview.txt | 2 | ||||
| -rw-r--r-- | Documentation/arm/Samsung-S3C24XX/Suspend.txt | 2 |
3 files changed, 3 insertions, 3 deletions
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt index 0ebd7e2244d0..e8f918b96123 100644 --- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt +++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt @@ -55,7 +55,7 @@ out s3c2410 API, then here are some notes on the process. as they have the same arguments, and can either take the pin specific values, or the more generic special-function-number arguments. -3) s3c2410_gpio_pullup() changes have the problem that whilst the +3) s3c2410_gpio_pullup() changes have the problem that while the s3c2410_gpio_pullup(x, 1) can be easily translated to the s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0) are not so easy. diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt index 359587b2367b..00d3c3141e21 100644 --- a/Documentation/arm/Samsung-S3C24XX/Overview.txt +++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt @@ -17,7 +17,7 @@ Introduction versions. The S3C2416 and S3C2450 devices are very similar and S3C2450 support is - included under the arch/arm/mach-s3c2416 directory. Note, whilst core + included under the arch/arm/mach-s3c2416 directory. Note, while core support for these SoCs is in, work on some of the extra peripherals and extra interrupts is still ongoing. diff --git a/Documentation/arm/Samsung-S3C24XX/Suspend.txt b/Documentation/arm/Samsung-S3C24XX/Suspend.txt index 1ca63b3e5635..cb4f0c0cdf9d 100644 --- a/Documentation/arm/Samsung-S3C24XX/Suspend.txt +++ b/Documentation/arm/Samsung-S3C24XX/Suspend.txt @@ -87,7 +87,7 @@ Debugging suspending, which means that use of printascii() or similar direct access to the UARTs will cause the debug to stop. - 2) Whilst the pm code itself will attempt to re-enable the UART clocks, + 2) While the pm code itself will attempt to re-enable the UART clocks, care should be taken that any external clock sources that the UARTs rely on are still enabled at that point. |