diff options
Diffstat (limited to 'Documentation/arm/sa1100/brutus.rst')
| -rw-r--r-- | Documentation/arm/sa1100/brutus.rst | 69 |
1 files changed, 0 insertions, 69 deletions
diff --git a/Documentation/arm/sa1100/brutus.rst b/Documentation/arm/sa1100/brutus.rst deleted file mode 100644 index e1a23bee6d44..000000000000 --- a/Documentation/arm/sa1100/brutus.rst +++ /dev/null @@ -1,69 +0,0 @@ -====== -Brutus -====== - -Brutus is an evaluation platform for the SA1100 manufactured by Intel. -For more details, see: - -http://developer.intel.com - -To compile for Brutus, you must issue the following commands:: - - make brutus_config - make config - [accept all the defaults] - make zImage - -The resulting kernel will end up in linux/arch/arm/boot/zImage. This file -must be loaded at 0xc0008000 in Brutus's memory and execution started at -0xc0008000 as well with the value of registers r0 = 0 and r1 = 16 upon -entry. - -But prior to execute the kernel, a ramdisk image must also be loaded in -memory. Use memory address 0xd8000000 for this. Note that the file -containing the (compressed) ramdisk image must not exceed 4 MB. - -Typically, you'll need angelboot to load the kernel. -The following angelboot.opt file should be used:: - - base 0xc0008000 - entry 0xc0008000 - r0 0x00000000 - r1 0x00000010 - device /dev/ttyS0 - options "9600 8N1" - baud 115200 - otherfile ramdisk_img.gz - otherbase 0xd8000000 - -Then load the kernel and ramdisk with:: - - angelboot -f angelboot.opt zImage - -The first Brutus serial port (assumed to be linked to /dev/ttyS0 on your -host PC) is used by angel to load the kernel and ramdisk image. The serial -console is provided through the second Brutus serial port. To access it, -you may use minicom configured with /dev/ttyS1, 9600 baud, 8N1, no flow -control. - -Currently supported -=================== - - - RS232 serial ports - - audio output - - LCD screen - - keyboard - -The actual Brutus support may not be complete without extra patches. -If such patches exist, they should be found from -ftp.netwinder.org/users/n/nico. - -A full PCMCIA support is still missing, although it's possible to hack -some drivers in order to drive already inserted cards at boot time with -little modifications. - -Any contribution is welcome. - -Please send patches to nico@fluxnic.net - -Have Fun ! |