diff options
Diffstat (limited to 'Documentation/arm/sa1100/graphicsmaster.rst')
| -rw-r--r-- | Documentation/arm/sa1100/graphicsmaster.rst | 60 |
1 files changed, 0 insertions, 60 deletions
diff --git a/Documentation/arm/sa1100/graphicsmaster.rst b/Documentation/arm/sa1100/graphicsmaster.rst deleted file mode 100644 index e39892514f0c..000000000000 --- a/Documentation/arm/sa1100/graphicsmaster.rst +++ /dev/null @@ -1,60 +0,0 @@ -======================================== -ADS GraphicsMaster Single Board Computer -======================================== - -For more details, contact Applied Data Systems or see -http://www.applieddata.net/products.html - -The original Linux support for this product has been provided by -Nicolas Pitre <nico@fluxnic.net>. Continued development work by -Woojung Huh <whuh@applieddata.net> - -Use 'make graphicsmaster_config' before any 'make config'. -This will set up defaults for GraphicsMaster support. - -The kernel zImage is linked to be loaded and executed at 0xc0400000. - -Linux can be used with the ADS BootLoader that ships with the -newer rev boards. See their documentation on how to load Linux. - -Supported peripherals -===================== - -- SA1100 LCD frame buffer (8/16bpp...sort of) -- SA1111 USB Master -- on-board SMC 92C96 ethernet NIC -- SA1100 serial port -- flash memory access (MTD/JFFS) -- pcmcia, compact flash -- touchscreen(ucb1200) -- ps/2 keyboard -- console on LCD screen -- serial ports (ttyS[0-2]) - - ttyS0 is default for serial console -- Smart I/O (ADC, keypad, digital inputs, etc) - See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation - and example user space code. ps/2 keybd is multiplexed through this driver - -To do -===== - -- everything else! :-) - -Notes -===== - -- The flash on board is divided into 3 partitions. mtd0 is where - the zImage is stored. It's been marked as read-only to keep you - from blasting over the bootloader. :) mtd1 is - for the ramdisk.gz image. mtd2 is user flash space and can be - utilized for either JFFS or if you're feeling crazy, running ext2 - on top of it. If you're not using the ADS bootloader, you're - welcome to blast over the mtd1 partition also. - -- 16bpp mode requires a different cable than what ships with the board. - Contact ADS or look through the manual to wire your own. Currently, - if you compile with 16bit mode support and switch into a lower bpp - mode, the timing is off so the image is corrupted. This will be - fixed soon. - -Any contribution can be sent to nico@fluxnic.net and will be greatly welcome! |