diff options
Diffstat (limited to 'Documentation/arm64/booting.txt')
-rw-r--r-- | Documentation/arm64/booting.txt | 266 |
1 files changed, 0 insertions, 266 deletions
diff --git a/Documentation/arm64/booting.txt b/Documentation/arm64/booting.txt deleted file mode 100644 index fbab7e21d116..000000000000 --- a/Documentation/arm64/booting.txt +++ /dev/null @@ -1,266 +0,0 @@ - Booting AArch64 Linux - ===================== - -Author: Will Deacon <will.deacon@arm.com> -Date : 07 September 2012 - -This document is based on the ARM booting document by Russell King and -is relevant to all public releases of the AArch64 Linux kernel. - -The AArch64 exception model is made up of a number of exception levels -(EL0 - EL3), with EL0 and EL1 having a secure and a non-secure -counterpart. EL2 is the hypervisor level and exists only in non-secure -mode. EL3 is the highest priority level and exists only in secure mode. - -For the purposes of this document, we will use the term `boot loader' -simply to define all software that executes on the CPU(s) before control -is passed to the Linux kernel. This may include secure monitor and -hypervisor code, or it may just be a handful of instructions for -preparing a minimal boot environment. - -Essentially, the boot loader should provide (as a minimum) the -following: - -1. Setup and initialise the RAM -2. Setup the device tree -3. Decompress the kernel image -4. Call the kernel image - - -1. Setup and initialise RAM ---------------------------- - -Requirement: MANDATORY - -The boot loader is expected to find and initialise all RAM that the -kernel will use for volatile data storage in the system. It performs -this in a machine dependent manner. (It may use internal algorithms -to automatically locate and size all RAM, or it may use knowledge of -the RAM in the machine, or any other method the boot loader designer -sees fit.) - - -2. Setup the device tree -------------------------- - -Requirement: MANDATORY - -The device tree blob (dtb) must be placed on an 8-byte boundary and must -not exceed 2 megabytes in size. Since the dtb will be mapped cacheable -using blocks of up to 2 megabytes in size, it must not be placed within -any 2M region which must be mapped with any specific attributes. - -NOTE: versions prior to v4.2 also require that the DTB be placed within -the 512 MB region starting at text_offset bytes below the kernel Image. - -3. Decompress the kernel image ------------------------------- - -Requirement: OPTIONAL - -The AArch64 kernel does not currently provide a decompressor and -therefore requires decompression (gzip etc.) to be performed by the boot -loader if a compressed Image target (e.g. Image.gz) is used. For -bootloaders that do not implement this requirement, the uncompressed -Image target is available instead. - - -4. Call the kernel image ------------------------- - -Requirement: MANDATORY - -The decompressed kernel image contains a 64-byte header as follows: - - u32 code0; /* Executable code */ - u32 code1; /* Executable code */ - u64 text_offset; /* Image load offset, little endian */ - u64 image_size; /* Effective Image size, little endian */ - u64 flags; /* kernel flags, little endian */ - u64 res2 = 0; /* reserved */ - u64 res3 = 0; /* reserved */ - u64 res4 = 0; /* reserved */ - u32 magic = 0x644d5241; /* Magic number, little endian, "ARM\x64" */ - u32 res5; /* reserved (used for PE COFF offset) */ - - -Header notes: - -- As of v3.17, all fields are little endian unless stated otherwise. - -- code0/code1 are responsible for branching to stext. - -- when booting through EFI, code0/code1 are initially skipped. - res5 is an offset to the PE header and the PE header has the EFI - entry point (efi_stub_entry). When the stub has done its work, it - jumps to code0 to resume the normal boot process. - -- Prior to v3.17, the endianness of text_offset was not specified. In - these cases image_size is zero and text_offset is 0x80000 in the - endianness of the kernel. Where image_size is non-zero image_size is - little-endian and must be respected. Where image_size is zero, - text_offset can be assumed to be 0x80000. - -- The flags field (introduced in v3.17) is a little-endian 64-bit field - composed as follows: - Bit 0: Kernel endianness. 1 if BE, 0 if LE. - Bit 1-2: Kernel Page size. - 0 - Unspecified. - 1 - 4K - 2 - 16K - 3 - 64K - Bit 3: Kernel physical placement - 0 - 2MB aligned base should be as close as possible - to the base of DRAM, since memory below it is not - accessible via the linear mapping - 1 - 2MB aligned base may be anywhere in physical - memory - Bits 4-63: Reserved. - -- When image_size is zero, a bootloader should attempt to keep as much - memory as possible free for use by the kernel immediately after the - end of the kernel image. The amount of space required will vary - depending on selected features, and is effectively unbound. - -The Image must be placed text_offset bytes from a 2MB aligned base -address anywhere in usable system RAM and called there. The region -between the 2 MB aligned base address and the start of the image has no -special significance to the kernel, and may be used for other purposes. -At least image_size bytes from the start of the image must be free for -use by the kernel. -NOTE: versions prior to v4.6 cannot make use of memory below the -physical offset of the Image so it is recommended that the Image be -placed as close as possible to the start of system RAM. - -If an initrd/initramfs is passed to the kernel at boot, it must reside -entirely within a 1 GB aligned physical memory window of up to 32 GB in -size that fully covers the kernel Image as well. - -Any memory described to the kernel (even that below the start of the -image) which is not marked as reserved from the kernel (e.g., with a -memreserve region in the device tree) will be considered as available to -the kernel. - -Before jumping into the kernel, the following conditions must be met: - -- Quiesce all DMA capable devices so that memory does not get - corrupted by bogus network packets or disk data. This will save - you many hours of debug. - -- Primary CPU general-purpose register settings - x0 = physical address of device tree blob (dtb) in system RAM. - x1 = 0 (reserved for future use) - x2 = 0 (reserved for future use) - x3 = 0 (reserved for future use) - -- CPU mode - All forms of interrupts must be masked in PSTATE.DAIF (Debug, SError, - IRQ and FIQ). - The CPU must be in either EL2 (RECOMMENDED in order to have access to - the virtualisation extensions) or non-secure EL1. - -- Caches, MMUs - The MMU must be off. - Instruction cache may be on or off. - The address range corresponding to the loaded kernel image must be - cleaned to the PoC. In the presence of a system cache or other - coherent masters with caches enabled, this will typically require - cache maintenance by VA rather than set/way operations. - System caches which respect the architected cache maintenance by VA - operations must be configured and may be enabled. - System caches which do not respect architected cache maintenance by VA - operations (not recommended) must be configured and disabled. - -- Architected timers - CNTFRQ must be programmed with the timer frequency and CNTVOFF must - be programmed with a consistent value on all CPUs. If entering the - kernel at EL1, CNTHCTL_EL2 must have EL1PCTEN (bit 0) set where - available. - -- Coherency - All CPUs to be booted by the kernel must be part of the same coherency - domain on entry to the kernel. This may require IMPLEMENTATION DEFINED - initialisation to enable the receiving of maintenance operations on - each CPU. - -- System registers - All writable architected system registers at the exception level where - the kernel image will be entered must be initialised by software at a - higher exception level to prevent execution in an UNKNOWN state. - - - SCR_EL3.FIQ must have the same value across all CPUs the kernel is - executing on. - - The value of SCR_EL3.FIQ must be the same as the one present at boot - time whenever the kernel is executing. - - For systems with a GICv3 interrupt controller to be used in v3 mode: - - If EL3 is present: - ICC_SRE_EL3.Enable (bit 3) must be initialiased to 0b1. - ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b1. - - If the kernel is entered at EL1: - ICC.SRE_EL2.Enable (bit 3) must be initialised to 0b1 - ICC_SRE_EL2.SRE (bit 0) must be initialised to 0b1. - - The DT or ACPI tables must describe a GICv3 interrupt controller. - - For systems with a GICv3 interrupt controller to be used in - compatibility (v2) mode: - - If EL3 is present: - ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b0. - - If the kernel is entered at EL1: - ICC_SRE_EL2.SRE (bit 0) must be initialised to 0b0. - - The DT or ACPI tables must describe a GICv2 interrupt controller. - - For CPUs with pointer authentication functionality: - - If EL3 is present: - SCR_EL3.APK (bit 16) must be initialised to 0b1 - SCR_EL3.API (bit 17) must be initialised to 0b1 - - If the kernel is entered at EL1: - HCR_EL2.APK (bit 40) must be initialised to 0b1 - HCR_EL2.API (bit 41) must be initialised to 0b1 - -The requirements described above for CPU mode, caches, MMUs, architected -timers, coherency and system registers apply to all CPUs. All CPUs must -enter the kernel in the same exception level. - -The boot loader is expected to enter the kernel on each CPU in the -following manner: - -- The primary CPU must jump directly to the first instruction of the - kernel image. The device tree blob passed by this CPU must contain - an 'enable-method' property for each cpu node. The supported - enable-methods are described below. - - It is expected that the bootloader will generate these device tree - properties and insert them into the blob prior to kernel entry. - -- CPUs with a "spin-table" enable-method must have a 'cpu-release-addr' - property in their cpu node. This property identifies a - naturally-aligned 64-bit zero-initalised memory location. - - These CPUs should spin outside of the kernel in a reserved area of - memory (communicated to the kernel by a /memreserve/ region in the - device tree) polling their cpu-release-addr location, which must be - contained in the reserved region. A wfe instruction may be inserted - to reduce the overhead of the busy-loop and a sev will be issued by - the primary CPU. When a read of the location pointed to by the - cpu-release-addr returns a non-zero value, the CPU must jump to this - value. The value will be written as a single 64-bit little-endian - value, so CPUs must convert the read value to their native endianness - before jumping to it. - -- CPUs with a "psci" enable method should remain outside of - the kernel (i.e. outside of the regions of memory described to the - kernel in the memory node, or in a reserved area of memory described - to the kernel by a /memreserve/ region in the device tree). The - kernel will issue CPU_ON calls as described in ARM document number ARM - DEN 0022A ("Power State Coordination Interface System Software on ARM - processors") to bring CPUs into the kernel. - - The device tree should contain a 'psci' node, as described in - Documentation/devicetree/bindings/arm/psci.txt. - -- Secondary CPU general-purpose register settings - x0 = 0 (reserved for future use) - x1 = 0 (reserved for future use) - x2 = 0 (reserved for future use) - x3 = 0 (reserved for future use) |