aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/arm64/memory.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/arm64/memory.rst')
-rw-r--r--Documentation/arm64/memory.rst123
1 files changed, 95 insertions, 28 deletions
diff --git a/Documentation/arm64/memory.rst b/Documentation/arm64/memory.rst
index 464b880fc4b7..b040909e45f8 100644
--- a/Documentation/arm64/memory.rst
+++ b/Documentation/arm64/memory.rst
@@ -14,6 +14,10 @@ with the 4KB page configuration, allowing 39-bit (512GB) or 48-bit
64KB pages, only 2 levels of translation tables, allowing 42-bit (4TB)
virtual address, are used but the memory layout is the same.
+ARMv8.2 adds optional support for Large Virtual Address space. This is
+only available when running with a 64KB page size and expands the
+number of descriptors in the first level of translation.
+
User addresses have bits 63:48 set to 0 while the kernel addresses have
the same bits set to 1. TTBRx selection is given by bit 63 of the
virtual address. The swapper_pg_dir contains only kernel (global)
@@ -22,40 +26,43 @@ The swapper_pg_dir address is written to TTBR1 and never written to
TTBR0.
-AArch64 Linux memory layout with 4KB pages + 3 levels::
-
- Start End Size Use
- -----------------------------------------------------------------------
- 0000000000000000 0000007fffffffff 512GB user
- ffffff8000000000 ffffffffffffffff 512GB kernel
-
-
-AArch64 Linux memory layout with 4KB pages + 4 levels::
+AArch64 Linux memory layout with 4KB pages + 4 levels (48-bit)::
Start End Size Use
-----------------------------------------------------------------------
0000000000000000 0000ffffffffffff 256TB user
- ffff000000000000 ffffffffffffffff 256TB kernel
-
-
-AArch64 Linux memory layout with 64KB pages + 2 levels::
+ ffff000000000000 ffff7fffffffffff 128TB kernel logical memory map
+ ffff800000000000 ffff9fffffffffff 32TB kasan shadow region
+ ffffa00000000000 ffffa00007ffffff 128MB bpf jit region
+ ffffa00008000000 ffffa0000fffffff 128MB modules
+ ffffa00010000000 fffffdffbffeffff ~93TB vmalloc
+ fffffdffbfff0000 fffffdfffe5f8fff ~998MB [guard region]
+ fffffdfffe5f9000 fffffdfffe9fffff 4124KB fixed mappings
+ fffffdfffea00000 fffffdfffebfffff 2MB [guard region]
+ fffffdfffec00000 fffffdffffbfffff 16MB PCI I/O space
+ fffffdffffc00000 fffffdffffdfffff 2MB [guard region]
+ fffffdffffe00000 ffffffffffdfffff 2TB vmemmap
+ ffffffffffe00000 ffffffffffffffff 2MB [guard region]
+
+
+AArch64 Linux memory layout with 64KB pages + 3 levels (52-bit with HW support)::
Start End Size Use
-----------------------------------------------------------------------
- 0000000000000000 000003ffffffffff 4TB user
- fffffc0000000000 ffffffffffffffff 4TB kernel
-
-
-AArch64 Linux memory layout with 64KB pages + 3 levels::
-
- Start End Size Use
- -----------------------------------------------------------------------
- 0000000000000000 0000ffffffffffff 256TB user
- ffff000000000000 ffffffffffffffff 256TB kernel
-
-
-For details of the virtual kernel memory layout please see the kernel
-booting log.
+ 0000000000000000 000fffffffffffff 4PB user
+ fff0000000000000 fff7ffffffffffff 2PB kernel logical memory map
+ fff8000000000000 fffd9fffffffffff 1440TB [gap]
+ fffda00000000000 ffff9fffffffffff 512TB kasan shadow region
+ ffffa00000000000 ffffa00007ffffff 128MB bpf jit region
+ ffffa00008000000 ffffa0000fffffff 128MB modules
+ ffffa00010000000 fffff81ffffeffff ~88TB vmalloc
+ fffff81fffff0000 fffffc1ffe58ffff ~3TB [guard region]
+ fffffc1ffe590000 fffffc1ffe9fffff 4544KB fixed mappings
+ fffffc1ffea00000 fffffc1ffebfffff 2MB [guard region]
+ fffffc1ffec00000 fffffc1fffbfffff 16MB PCI I/O space
+ fffffc1fffc00000 fffffc1fffdfffff 2MB [guard region]
+ fffffc1fffe00000 ffffffffffdfffff 3968GB vmemmap
+ ffffffffffe00000 ffffffffffffffff 2MB [guard region]
Translation table lookup with 4KB pages::
@@ -83,7 +90,8 @@ Translation table lookup with 64KB pages::
| | | | [15:0] in-page offset
| | | +----------> [28:16] L3 index
| | +--------------------------> [41:29] L2 index
- | +-------------------------------> [47:42] L1 index
+ | +-------------------------------> [47:42] L1 index (48-bit)
+ | [51:42] L1 index (52-bit)
+-------------------------------------------------> [63] TTBR0/1
@@ -96,3 +104,62 @@ ARM64_HARDEN_EL2_VECTORS is selected for particular CPUs.
When using KVM with the Virtualization Host Extensions, no additional
mappings are created, since the host kernel runs directly in EL2.
+
+52-bit VA support in the kernel
+-------------------------------
+If the ARMv8.2-LVA optional feature is present, and we are running
+with a 64KB page size; then it is possible to use 52-bits of address
+space for both userspace and kernel addresses. However, any kernel
+binary that supports 52-bit must also be able to fall back to 48-bit
+at early boot time if the hardware feature is not present.
+
+This fallback mechanism necessitates the kernel .text to be in the
+higher addresses such that they are invariant to 48/52-bit VAs. Due
+to the kasan shadow being a fraction of the entire kernel VA space,
+the end of the kasan shadow must also be in the higher half of the
+kernel VA space for both 48/52-bit. (Switching from 48-bit to 52-bit,
+the end of the kasan shadow is invariant and dependent on ~0UL,
+whilst the start address will "grow" towards the lower addresses).
+
+In order to optimise phys_to_virt and virt_to_phys, the PAGE_OFFSET
+is kept constant at 0xFFF0000000000000 (corresponding to 52-bit),
+this obviates the need for an extra variable read. The physvirt
+offset and vmemmap offsets are computed at early boot to enable
+this logic.
+
+As a single binary will need to support both 48-bit and 52-bit VA
+spaces, the VMEMMAP must be sized large enough for 52-bit VAs and
+also must be sized large enought to accommodate a fixed PAGE_OFFSET.
+
+Most code in the kernel should not need to consider the VA_BITS, for
+code that does need to know the VA size the variables are
+defined as follows:
+
+VA_BITS constant the *maximum* VA space size
+
+VA_BITS_MIN constant the *minimum* VA space size
+
+vabits_actual variable the *actual* VA space size
+
+
+Maximum and minimum sizes can be useful to ensure that buffers are
+sized large enough or that addresses are positioned close enough for
+the "worst" case.
+
+52-bit userspace VAs
+--------------------
+To maintain compatibility with software that relies on the ARMv8.0
+VA space maximum size of 48-bits, the kernel will, by default,
+return virtual addresses to userspace from a 48-bit range.
+
+Software can "opt-in" to receiving VAs from a 52-bit space by
+specifying an mmap hint parameter that is larger than 48-bit.
+For example:
+ maybe_high_address = mmap(~0UL, size, prot, flags,...);
+
+It is also possible to build a debug kernel that returns addresses
+from a 52-bit space by enabling the following kernel config options:
+ CONFIG_EXPERT=y && CONFIG_ARM64_FORCE_52BIT=y
+
+Note that this option is only intended for debugging applications
+and should not be used in production.