diff options
Diffstat (limited to 'Documentation/arm')
| -rw-r--r-- | Documentation/arm/CCN.txt | 52 | ||||
| -rw-r--r-- | Documentation/arm/Marvell/README | 23 | ||||
| -rw-r--r-- | Documentation/arm/Samsung/Overview.txt | 11 | ||||
| -rwxr-xr-x | Documentation/arm/Samsung/clksrc-change-registers.awk | 1 |
4 files changed, 65 insertions, 22 deletions
diff --git a/Documentation/arm/CCN.txt b/Documentation/arm/CCN.txt new file mode 100644 index 000000000000..0632b3aad83e --- /dev/null +++ b/Documentation/arm/CCN.txt @@ -0,0 +1,52 @@ +ARM Cache Coherent Network +========================== + +CCN-504 is a ring-bus interconnect consisting of 11 crosspoints +(XPs), with each crosspoint supporting up to two device ports, +so nodes (devices) 0 and 1 are connected to crosspoint 0, +nodes 2 and 3 to crosspoint 1 etc. + +PMU (perf) driver +----------------- + +The CCN driver registers a perf PMU driver, which provides +description of available events and configuration options +in sysfs, see /sys/bus/event_source/devices/ccn*. + +The "format" directory describes format of the config, config1 +and config2 fields of the perf_event_attr structure. The "events" +directory provides configuration templates for all documented +events, that can be used with perf tool. For example "xp_valid_flit" +is an equivalent of "type=0x8,event=0x4". Other parameters must be +explicitly specified. For events originating from device, "node" +defines its index. All crosspoint events require "xp" (index), +"port" (device port number) and "vc" (virtual channel ID) and +"dir" (direction). Watchpoints (special "event" value 0xfe) also +require comparator values ("cmp_l" and "cmp_h") and "mask", being +index of the comparator mask. + +Masks are defined separately from the event description +(due to limited number of the config values) in the "cmp_mask" +directory, with first 8 configurable by user and additional +4 hardcoded for the most frequent use cases. + +Cycle counter is described by a "type" value 0xff and does +not require any other settings. + +Example of perf tool use: + +/ # perf list | grep ccn + ccn/cycles/ [Kernel PMU event] +<...> + ccn/xp_valid_flit/ [Kernel PMU event] +<...> + +/ # perf stat -C 0 -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \ + sleep 1 + +The driver does not support sampling, therefore "perf record" will +not work. Also notice that only single cpu is being selected +("-C 0") - this is because perf framework does not support +"non-CPU related" counters (yet?) so system-wide session ("-a") +would try (and in most cases fail) to set up the same event +per each CPU. diff --git a/Documentation/arm/Marvell/README b/Documentation/arm/Marvell/README index 2cce5401e323..4dc66c173e10 100644 --- a/Documentation/arm/Marvell/README +++ b/Documentation/arm/Marvell/README @@ -53,8 +53,8 @@ Kirkwood family Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf Homepage: http://www.marvell.com/embedded-processors/kirkwood/ Core: Feroceon ARMv5 compatible - Linux kernel mach directory: arch/arm/mach-kirkwood - Linux kernel plat directory: arch/arm/plat-orion + Linux kernel mach directory: arch/arm/mach-mvebu + Linux kernel plat directory: none Discovery family ---------------- @@ -83,7 +83,9 @@ EBU Armada family 88F6710 88F6707 88F6W11 - Product Brief: http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf + Product Brief: http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf + Hardware Spec: http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-datasheet.pdf + Functional Spec: http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-FunctionalSpec-datasheet.pdf Armada 375 Flavors: 88F6720 @@ -100,8 +102,7 @@ EBU Armada family MV78460 NOTE: not to be confused with the non-SMP 78xx0 SoCs Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf - - No public datasheet available. + Functional Spec: http://www.marvell.com/embedded-processors/armada-xp/assets/ARMADA-XP-Functional-SpecDatasheet.pdf Core: Sheeva ARMv7 compatible @@ -135,7 +136,9 @@ Dove family (application processor) Functional Spec : http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Functional-Spec.pdf Homepage: http://www.marvell.com/application-processors/armada-500/ Core: ARMv7 compatible - Directory: arch/arm/mach-dove + + Directory: arch/arm/mach-mvebu (DT enabled platforms) + arch/arm/mach-dove (non-DT enabled platforms) PXA 2xx/3xx/93x/95x family -------------------------- @@ -253,10 +256,10 @@ Berlin family (Digital Entertainment) Long-term plans --------------- - * Unify the mach-dove/, mach-mv78xx0/, mach-orion5x/ and - mach-kirkwood/ into the mach-mvebu/ to support all SoCs from the - Marvell EBU (Engineering Business Unit) in a single mach-<foo> - directory. The plat-orion/ would therefore disappear. + * Unify the mach-dove/, mach-mv78xx0/, mach-orion5x/ into the + mach-mvebu/ to support all SoCs from the Marvell EBU (Engineering + Business Unit) in a single mach-<foo> directory. The plat-orion/ + would therefore disappear. * Unify the mach-mmp/ and mach-pxa/ into the same mach-pxa directory. The plat-pxa/ would therefore disappear. diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt index 658abb258cef..8f7309bad460 100644 --- a/Documentation/arm/Samsung/Overview.txt +++ b/Documentation/arm/Samsung/Overview.txt @@ -13,8 +13,6 @@ Introduction - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list - S3C64XX: S3C6400 and S3C6410 - - S5P6440 - - S5PC100 - S5PC110 / S5PV210 @@ -34,8 +32,6 @@ Configuration A number of configurations are supplied, as there is no current way of unifying all the SoCs into one kernel. - s5p6440_defconfig - S5P6440 specific default configuration - s5pc100_defconfig - S5PC100 specific default configuration s5pc110_defconfig - S5PC110 specific default configuration s5pv210_defconfig - S5PV210 specific default configuration @@ -67,13 +63,6 @@ Layout changes where to simplify the include and dependency issues involved with having so many different platform directories. - It was decided to remove plat-s5pc1xx as some of the support was already - in plat-s5p or plat-samsung, with the S5PC110 support added with S5PV210 - the only user was the S5PC100. The S5PC100 specific items where moved to - arch/arm/mach-s5pc100. - - - Port Contributors ----------------- diff --git a/Documentation/arm/Samsung/clksrc-change-registers.awk b/Documentation/arm/Samsung/clksrc-change-registers.awk index 0c50220851fb..d9174fabe37e 100755 --- a/Documentation/arm/Samsung/clksrc-change-registers.awk +++ b/Documentation/arm/Samsung/clksrc-change-registers.awk @@ -68,7 +68,6 @@ BEGIN { while (getline line < ARGV[1] > 0) { if (line ~ /\#define.*_MASK/ && - !(line ~ /S5PC100_EPLL_MASK/) && !(line ~ /USB_SIG_MASK/)) { splitdefine(line, fields) name = fields[0] |