diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/dev-tools/kunit/start.rst | 138 |
1 files changed, 92 insertions, 46 deletions
diff --git a/Documentation/dev-tools/kunit/start.rst b/Documentation/dev-tools/kunit/start.rst index 867a4bba6bf6..f4f504f1fb15 100644 --- a/Documentation/dev-tools/kunit/start.rst +++ b/Documentation/dev-tools/kunit/start.rst @@ -4,6 +4,10 @@ Getting Started =============== +This page contains an overview of the kunit_tool and KUnit framework, +teaching how to run existing tests and then how to write a simple test case, +and covers common problems users face when using KUnit for the first time. + Installing Dependencies ======================= KUnit has the same dependencies as the Linux kernel. As long as you can @@ -19,30 +23,53 @@ can run kunit_tool: ./tools/testing/kunit/kunit.py run -For more information on this wrapper, see: -Documentation/dev-tools/kunit/run_wrapper.rst. +.. note :: + You may see the following error: + "The source tree is not clean, please run 'make ARCH=um mrproper'" -Creating a ``.kunitconfig`` ---------------------------- + This happens because internally kunit.py specifies ``.kunit`` + (default option) as the build directory in the command ``make O=output/dir`` + through the argument ``--build_dir``. Hence, before starting an + out-of-tree build, the source tree must be clean. -By default, kunit_tool runs a selection of tests. However, you can specify which -unit tests to run by creating a ``.kunitconfig`` file with kernel config options -that enable only a specific set of tests and their dependencies. -The ``.kunitconfig`` file contains a list of kconfig options which are required -to run the desired targets. The ``.kunitconfig`` also contains any other test -specific config options, such as test dependencies. For example: the -``FAT_FS`` tests - ``FAT_KUNIT_TEST``, depends on -``FAT_FS``. ``FAT_FS`` can be enabled by selecting either ``MSDOS_FS`` -or ``VFAT_FS``. To run ``FAT_KUNIT_TEST``, the ``.kunitconfig`` has: + There is also the same caveat mentioned in the "Build directory for + the kernel" section of the :doc:`admin-guide </admin-guide/README>`, + that is, its use, it must be used for all invocations of ``make``. + The good news is that it can indeed be solved by running + ``make ARCH=um mrproper``, just be aware that this will delete the + current configuration and all generated files. -.. code-block:: none +If everything worked correctly, you should see the following: - CONFIG_KUNIT=y - CONFIG_MSDOS_FS=y - CONFIG_FAT_KUNIT_TEST=y +.. code-block:: -1. A good starting point for the ``.kunitconfig`` is the KUnit default config. - You can generate it by running: + Configuring KUnit Kernel ... + Building KUnit Kernel ... + Starting KUnit Kernel ... + +The tests will pass or fail. + +.. note :: + Because it is building a lot of sources for the first time, + the ``Building KUnit Kernel`` step may take a while. + +For detailed information on this wrapper, see: +Documentation/dev-tools/kunit/run_wrapper.rst. + +Selecting which tests to run +---------------------------- + +By default, kunit_tool runs all tests reachable with minimal configuration, +that is, using default values for most of the kconfig options. However, +you can select which tests to run by: + +- `Customizing Kconfig`_ used to compile the kernel, or +- `Filtering tests by name`_ to select specifically which compiled tests to run. + +Customizing Kconfig +~~~~~~~~~~~~~~~~~~~ +A good starting point for the ``.kunitconfig`` is the KUnit default config. +If you didn't run ``kunit.py run`` yet, you can generate it by running: .. code-block:: bash @@ -54,48 +81,69 @@ or ``VFAT_FS``. To run ``FAT_KUNIT_TEST``, the ``.kunitconfig`` has: ``.kunitconfig`` lives in the ``--build_dir`` used by kunit.py, which is ``.kunit`` by default. -.. note :: +Before running the tests, kunit_tool ensures that all config options +set in ``.kunitconfig`` are set in the kernel ``.config``. It will warn +you if you have not included dependencies for the options used. + +There are many ways to customize the configurations: + +a. Edit ``.kunit/.kunitconfig``. The file should contain the list of kconfig + options required to run the desired tests, including their dependencies. You may want to remove CONFIG_KUNIT_ALL_TESTS from the ``.kunitconfig`` as it will enable a number of additional tests that you may not want. + If you need to run on an architecture other than UML see :ref:`kunit-on-qemu`. -2. You can then add any other Kconfig options, for example: +b. Enable additional kconfig options on top of ``.kunit/.kunitconfig``. + For example, to include the kernel's linked-list test you can run:: -.. code-block:: none + ./tools/testing/kunit/kunit.py run \ + --kconfig_add CONFIG_LIST_KUNIT_TEST=y - CONFIG_LIST_KUNIT_TEST=y +c. Provide the path of one or more .kunitconfig files from the tree. + For example, to run only ``FAT_FS`` and ``EXT4`` tests you can run:: -Before running the tests, kunit_tool ensures that all config options -set in ``.kunitconfig`` are set in the kernel ``.config``. It will warn -you if you have not included dependencies for the options used. + ./tools/testing/kunit/kunit.py run \ + --kunitconfig ./fs/fat/.kunitconfig \ + --kunitconfig ./fs/ext4/.kunitconfig -.. note :: - If you change the ``.kunitconfig``, kunit.py will trigger a rebuild of the +d. If you change the ``.kunitconfig``, kunit.py will trigger a rebuild of the ``.config`` file. But you can edit the ``.config`` file directly or with tools like ``make menuconfig O=.kunit``. As long as its a superset of ``.kunitconfig``, kunit.py won't overwrite your changes. -Running Tests (KUnit Wrapper) ------------------------------ -1. To make sure that everything is set up correctly, invoke the Python - wrapper from your kernel repository: -.. code-block:: bash +.. note :: - ./tools/testing/kunit/kunit.py run + To save a .kunitconfig after finding a satisfactory configuration:: -If everything worked correctly, you should see the following: + make savedefconfig O=.kunit + cp .kunit/defconfig .kunit/.kunitconfig -.. code-block:: +Filtering tests by name +~~~~~~~~~~~~~~~~~~~~~~~ +If you want to be more specific than Kconfig can provide, it is also possible +to select which tests to execute at boot-time by passing a glob filter +(read instructions regarding the pattern in the manpage :manpage:`glob(7)`). +If there is a ``"."`` (period) in the filter, it will be interpreted as a +separator between the name of the test suite and the test case, +otherwise, it will be interpreted as the name of the test suite. +For example, let's assume we are using the default config: - Generating .config ... - Building KUnit Kernel ... - Starting KUnit Kernel ... +a. inform the name of a test suite, like ``"kunit_executor_test"``, + to run every test case it contains:: -The tests will pass or fail. + ./tools/testing/kunit/kunit.py run "kunit_executor_test" -.. note :: - Because it is building a lot of sources for the first time, the - ``Building KUnit kernel`` may take a while. +b. inform the name of a test case prefixed by its test suite, + like ``"example.example_simple_test"``, to run specifically that test case:: + + ./tools/testing/kunit/kunit.py run "example.example_simple_test" + +c. use wildcard characters (``*?[``) to run any test case that matches the pattern, + like ``"*.*64*"`` to run test cases containing ``"64"`` in the name inside + any test suite:: + + ./tools/testing/kunit/kunit.py run "*.*64*" Running Tests without the KUnit Wrapper ======================================= @@ -217,7 +265,7 @@ Now we are ready to write the test cases. obj-$(CONFIG_MISC_EXAMPLE_TEST) += example_test.o -4. Add the following lines to ``.kunitconfig``: +4. Add the following lines to ``.kunit/.kunitconfig``: .. code-block:: none @@ -254,7 +302,5 @@ Next Steps examples. * Documentation/dev-tools/kunit/api/index.rst - KUnit APIs used for testing. -* Documentation/dev-tools/kunit/kunit-tool.rst - kunit_tool helper - script. * Documentation/dev-tools/kunit/faq.rst - KUnit common questions and answers. |