diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/devicetree/bindings/arm/cpus.yaml | 177 |
1 files changed, 127 insertions, 50 deletions
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 0d5b61056b10..5c13b73e4d57 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -85,6 +85,8 @@ properties: compatible: enum: + - apple,icestorm + - apple,firestorm - arm,arm710t - arm,arm720t - arm,arm740t @@ -123,11 +125,22 @@ properties: - arm,cortex-a12 - arm,cortex-a15 - arm,cortex-a17 + - arm,cortex-a32 + - arm,cortex-a34 + - arm,cortex-a35 - arm,cortex-a53 - arm,cortex-a55 - arm,cortex-a57 + - arm,cortex-a65 - arm,cortex-a72 - arm,cortex-a73 + - arm,cortex-a75 + - arm,cortex-a76 + - arm,cortex-a77 + - arm,cortex-a78 + - arm,cortex-a78ae + - arm,cortex-a510 + - arm,cortex-a710 - arm,cortex-m0 - arm,cortex-m0+ - arm,cortex-m1 @@ -136,6 +149,12 @@ properties: - arm,cortex-r4 - arm,cortex-r5 - arm,cortex-r7 + - arm,cortex-x1 + - arm,cortex-x2 + - arm,neoverse-e1 + - arm,neoverse-n1 + - arm,neoverse-n2 + - arm,neoverse-v1 - brcm,brahma-b15 - brcm,brahma-b53 - brcm,vulcan @@ -155,76 +174,93 @@ properties: - nvidia,tegra194-carmel - qcom,krait - qcom,kryo + - qcom,kryo240 + - qcom,kryo250 + - qcom,kryo260 + - qcom,kryo280 - qcom,kryo385 + - qcom,kryo468 - qcom,kryo485 + - qcom,kryo560 + - qcom,kryo570 + - qcom,kryo685 + - qcom,kryo780 - qcom,scorpion enable-method: - allOf: - - $ref: '/schemas/types.yaml#/definitions/string' - - oneOf: - # On ARM v8 64-bit this property is required - - enum: - - psci - - spin-table - # On ARM 32-bit systems this property is optional - - enum: - - actions,s500-smp - - allwinner,sun6i-a31 - - allwinner,sun8i-a23 - - allwinner,sun9i-a80-smp - - allwinner,sun8i-a83t-smp - - amlogic,meson8-smp - - amlogic,meson8b-smp - - arm,realview-smp - - aspeed,ast2600-smp - - brcm,bcm11351-cpu-method - - brcm,bcm23550 - - brcm,bcm2836-smp - - brcm,bcm63138 - - brcm,bcm-nsp-smp - - brcm,brahma-b15 - - marvell,armada-375-smp - - marvell,armada-380-smp - - marvell,armada-390-smp - - marvell,armada-xp-smp - - marvell,98dx3236-smp - - marvell,mmp3-smp - - mediatek,mt6589-smp - - mediatek,mt81xx-tz-smp - - qcom,gcc-msm8660 - - qcom,kpss-acc-v1 - - qcom,kpss-acc-v2 - - renesas,apmu - - renesas,r9a06g032-smp - - rockchip,rk3036-smp - - rockchip,rk3066-smp - - socionext,milbeaut-m10v-smp - - ste,dbx500-smp + $ref: '/schemas/types.yaml#/definitions/string' + oneOf: + # On ARM v8 64-bit this property is required + - enum: + - psci + - spin-table + # On ARM 32-bit systems this property is optional + - enum: + - actions,s500-smp + - allwinner,sun6i-a31 + - allwinner,sun8i-a23 + - allwinner,sun9i-a80-smp + - allwinner,sun8i-a83t-smp + - amlogic,meson8-smp + - amlogic,meson8b-smp + - arm,realview-smp + - aspeed,ast2600-smp + - brcm,bcm11351-cpu-method + - brcm,bcm23550 + - brcm,bcm2836-smp + - brcm,bcm63138 + - brcm,bcm-nsp-smp + - brcm,brahma-b15 + - marvell,armada-375-smp + - marvell,armada-380-smp + - marvell,armada-390-smp + - marvell,armada-xp-smp + - marvell,98dx3236-smp + - marvell,mmp3-smp + - mediatek,mt6589-smp + - mediatek,mt81xx-tz-smp + - qcom,gcc-msm8660 + - qcom,kpss-acc-v1 + - qcom,kpss-acc-v2 + - qcom,msm8226-smp + - qcom,msm8909-smp + # Only valid on ARM 32-bit, see above for ARM v8 64-bit + - qcom,msm8916-smp + - renesas,apmu + - renesas,r9a06g032-smp + - rockchip,rk3036-smp + - rockchip,rk3066-smp + - socionext,milbeaut-m10v-smp + - ste,dbx500-smp + - ti,am3352 + - ti,am4372 cpu-release-addr: - $ref: '/schemas/types.yaml#/definitions/uint64' - + oneOf: + - $ref: '/schemas/types.yaml#/definitions/uint32' + - $ref: '/schemas/types.yaml#/definitions/uint64' description: + The DT specification defines this as 64-bit always, but some 32-bit Arm + systems have used a 32-bit value which must be supported. Required for systems that have an "enable-method" property value of "spin-table". - On ARM v8 64-bit systems must be a two cell - property identifying a 64-bit zero-initialised - memory location. cpu-idle-states: $ref: '/schemas/types.yaml#/definitions/phandle-array' + items: + maxItems: 1 description: | List of phandles to idle state nodes supported by this cpu (see ./idle-states.yaml). capacity-dmips-mhz: - $ref: '/schemas/types.yaml#/definitions/uint32' description: u32 value representing CPU capacity (see ./cpu-capacity.txt) in DMIPS/MHz, relative to highest capacity-dmips-mhz in the system. + cci-control-port: true + dynamic-power-coefficient: $ref: '/schemas/types.yaml#/definitions/uint32' description: @@ -242,14 +278,19 @@ properties: where voltage is in V, frequency is in MHz. + performance-domains: + maxItems: 1 + description: + List of phandles and performance domain specifiers, as defined by + bindings of the performance domain provider. See also + dvfs/performance-domain.yaml. + power-domains: - $ref: '/schemas/types.yaml#/definitions/phandle-array' description: List of phandles and PM domain specifiers, as defined by bindings of the PM domain provider (see also ../power_domain.txt). power-domain-names: - $ref: '/schemas/types.yaml#/definitions/string-array' description: A list of power domain name strings sorted in the same order as the power-domains property. @@ -273,7 +314,8 @@ properties: Specifies the ACC* node associated with this CPU. Required for systems that have an "enable-method" property - value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" + value of "qcom,kpss-acc-v1", "qcom,kpss-acc-v2", "qcom,msm8226-smp" or + "qcom,msm8916-smp". * arm/msm/qcom,kpss-acc.txt @@ -287,6 +329,39 @@ properties: While optional, it is the preferred way to get access to the cpu-core power-domains. + secondary-boot-reg: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: | + Required for systems that have an "enable-method" property value of + "brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp". + + This includes the following SoCs: | + BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664, BCM23550 + BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312 + + The secondary-boot-reg property is a u32 value that specifies the + physical address of the register used to request the ROM holding pen + code release a secondary CPU. The value written to the register is + formed by encoding the target CPU id into the low bits of the + physical start address it should jump to. + +if: + # If the enable-method property contains one of those values + properties: + enable-method: + contains: + enum: + - brcm,bcm11351-cpu-method + - brcm,bcm23550 + - brcm,bcm-nsp-smp + # and if enable-method is present + required: + - enable-method + +then: + required: + - secondary-boot-reg + required: - device_type - reg @@ -295,6 +370,8 @@ required: dependencies: rockchip,pmu: [enable-method] +additionalProperties: true + examples: - | cpus { |