diff options
Diffstat (limited to 'Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt | 37 |
1 files changed, 8 insertions, 29 deletions
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index 46d0af1f0872..c20f38e56544 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -58,19 +58,11 @@ This binding for the SCU power domain providers uses the generic power domain binding[2]. Required properties: -- compatible: Should be "fsl,scu-pd". -- #address-cells: Should be 1. -- #size-cells: Should be 0. - -Required properties for power domain sub nodes: -- #power-domain-cells: Must be 0. - -Optional Properties: -- reg: Resource ID of this power domain. - No exist means uncontrollable by user. +- compatible: Should be "fsl,imx8qxp-scu-pd". +- #power-domain-cells: Must be 1. Contains the Resource ID used by + SCU commands. See detailed Resource ID list from: - include/dt-bindings/power/imx-rsrc.h -- power-domains: phandle pointing to the parent power domain. + include/dt-bindings/firmware/imx/rsrc.h Clock bindings based on SCU Message Protocol ------------------------------------------------------------ @@ -152,22 +144,9 @@ firmware { ... }; - imx8qx-pm { - compatible = "fsl,scu-pd"; - #address-cells = <1>; - #size-cells = <0>; - - pd_dma: dma-power-domain { - #power-domain-cells = <0>; - - pd_dma_lpuart0: dma-lpuart0@57 { - reg = <SC_R_UART_0>; - #power-domain-cells = <0>; - power-domains = <&pd_dma>; - }; - ... - }; - ... + pd: imx8qx-pd { + compatible = "fsl,imx8qxp-scu-pd"; + #power-domain-cells = <1>; }; }; }; @@ -179,5 +158,5 @@ serial@5a060000 { clocks = <&clk IMX8QXP_UART0_CLK>, <&clk IMX8QXP_UART0_IPG_CLK>; clock-names = "per", "ipg"; - power-domains = <&pd_dma_lpuart0>; + power-domains = <&pd IMX_SC_R_UART_0>; }; |