aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/arm/vexpress.txt
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/arm/vexpress.txt229
1 files changed, 0 insertions, 229 deletions
diff --git a/Documentation/devicetree/bindings/arm/vexpress.txt b/Documentation/devicetree/bindings/arm/vexpress.txt
deleted file mode 100644
index 39844cd0bcce..000000000000
--- a/Documentation/devicetree/bindings/arm/vexpress.txt
+++ /dev/null
@@ -1,229 +0,0 @@
-ARM Versatile Express boards family
------------------------------------
-
-ARM's Versatile Express platform consists of a motherboard and one
-or more daughterboards (tiles). The motherboard provides a set of
-peripherals. Processor and RAM "live" on the tiles.
-
-The motherboard and each core tile should be described by a separate
-Device Tree source file, with the tile's description including
-the motherboard file using a /include/ directive. As the motherboard
-can be initialized in one of two different configurations ("memory
-maps"), care must be taken to include the correct one.
-
-
-Root node
----------
-
-Required properties in the root node:
-- compatible value:
- compatible = "arm,vexpress,<model>", "arm,vexpress";
- where <model> is the full tile model name (as used in the tile's
- Technical Reference Manual), eg.:
- - for Coretile Express A5x2 (V2P-CA5s):
- compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
- - for Coretile Express A9x4 (V2P-CA9):
- compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
- If a tile comes in several variants or can be used in more then one
- configuration, the compatible value should be:
- compatible = "arm,vexpress,<model>,<variant>", \
- "arm,vexpress,<model>", "arm,vexpress";
- eg:
- - Coretile Express A15x2 (V2P-CA15) with Tech Chip 1:
- compatible = "arm,vexpress,v2p-ca15,tc1", \
- "arm,vexpress,v2p-ca15", "arm,vexpress";
- - LogicTile Express 13MG (V2F-2XV6) running Cortex-A7 (3 cores) SMM:
- compatible = "arm,vexpress,v2f-2xv6,ca7x3", \
- "arm,vexpress,v2f-2xv6", "arm,vexpress";
-
-Optional properties in the root node:
-- tile model name (use name from the tile's Technical Reference
- Manual, eg. "V2P-CA5s")
- model = "<model>";
-- tile's HBI number (unique ARM's board model ID, visible on the
- PCB's silkscreen) in hexadecimal transcription:
- arm,hbi = <0xhbi>
- eg:
- - for Coretile Express A5x2 (V2P-CA5s) HBI-0191:
- arm,hbi = <0x191>;
- - Coretile Express A9x4 (V2P-CA9) HBI-0225:
- arm,hbi = <0x225>;
-
-
-CPU nodes
----------
-
-Top-level standard "cpus" node is required. It must contain a node
-with device_type = "cpu" property for every available core, eg.:
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a5";
- reg = <0>;
- };
- };
-
-
-Configuration infrastructure
-----------------------------
-
-The platform has an elaborated configuration system, consisting of
-microcontrollers residing on the mother- and daughterboards known
-as Motherboard/Daughterboard Configuration Controller (MCC and DCC).
-The controllers are responsible for the platform initialization
-(reset generation, flash programming, FPGA bitfiles loading etc.)
-but also control clock generators, voltage regulators, gather
-environmental data like temperature, power consumption etc. Even
-the video output switch (FPGA) is controlled that way.
-
-The controllers are not mapped into normal memory address space
-and must be accessed through bridges - other devices capable
-of generating transactions on the configuration bus.
-
-The nodes describing configuration controllers must define
-the following properties:
-- compatible value:
- compatible = "arm,vexpress,config-bus";
-- bridge phandle:
- arm,vexpress,config-bridge = <phandle>;
-and children describing available functions.
-
-
-Platform topology
------------------
-
-As Versatile Express can be configured in number of physically
-different setups, the device tree should describe platform topology.
-Root node and main motherboard node must define the following
-property, describing physical location of the children nodes:
-- site number:
- arm,vexpress,site = <number>;
- where 0 means motherboard, 1 or 2 are daugtherboard sites,
- 0xf means "master" site (site containing main CPU tile)
-- when daughterboards are stacked on one site, their position
- in the stack be be described with:
- arm,vexpress,position = <number>;
-- when describing tiles consisting more than one DCC, its number
- can be described with:
- arm,vexpress,dcc = <number>;
-
-Any of the numbers above defaults to zero if not defined in
-the node or any of its parent.
-
-
-Motherboard
------------
-
-The motherboard description file provides a single "motherboard" node
-using 2 address cells corresponding to the Static Memory Bus used
-between the motherboard and the tile. The first cell defines the Chip
-Select (CS) line number, the second cell address offset within the CS.
-All interrupt lines between the motherboard and the tile are active
-high and are described using single cell.
-
-Optional properties of the "motherboard" node:
-- motherboard's memory map variant:
- arm,v2m-memory-map = "<name>";
- where name is one of:
- - "rs1" - for RS1 map (i.a. peripherals on CS3); this map is also
- referred to as "ARM Cortex-A Series memory map":
- arm,v2m-memory-map = "rs1";
- When this property is missing, the motherboard is using the original
- memory map (also known as the "Legacy memory map", primarily used
- with the original CoreTile Express A9x4) with peripherals on CS7.
-
-Motherboard .dtsi files provide a set of labelled peripherals that
-can be used to obtain required phandle in the tile's "aliases" node:
-- UARTs, note that the numbers correspond to the physical connectors
- on the motherboard's back panel:
- v2m_serial0, v2m_serial1, v2m_serial2 and v2m_serial3
-- I2C controllers:
- v2m_i2c_dvi and v2m_i2c_pcie
-- SP804 timers:
- v2m_timer01 and v2m_timer23
-
-The tile description should define a "smb" node, describing the
-Static Memory Bus between the tile and motherboard. It must define
-the following properties:
-- "simple-bus" compatible value (to ensure creation of the children)
- compatible = "simple-bus";
-- mapping of the SMB CS/offset addresses into main address space:
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <...>;
-- interrupts mapping:
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 63>;
- interrupt-map = <...>;
-
-
-Example of a VE tile description (simplified)
----------------------------------------------
-
-/dts-v1/;
-
-/ {
- model = "V2P-CA5s";
- arm,hbi = <0x225>;
- arm,vexpress,site = <0xf>;
- compatible = "arm,vexpress-v2p-ca5s", "arm,vexpress";
- interrupt-parent = <&gic>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- chosen { };
-
- aliases {
- serial0 = &v2m_serial0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a5";
- reg = <0>;
- };
- };
-
- gic: interrupt-controller@2c001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x2c001000 0x1000>,
- <0x2c000100 0x100>;
- };
-
- dcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
-
- osc@0 {
- compatible = "arm,vexpress-osc";
- };
- };
-
- smb {
- compatible = "simple-bus";
-
- #address-cells = <2>;
- #size-cells = <1>;
- /* CS0 is visible at 0x08000000 */
- ranges = <0 0 0x08000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 63>;
- /* Active high IRQ 0 is connected to GIC's SPI0 */
- interrupt-map = <0 0 0 &gic 0 0 4>;
-
- /include/ "vexpress-v2m-rs1.dtsi"
- };
-};
-