diff options
Diffstat (limited to 'Documentation/devicetree/bindings/arm')
16 files changed, 197 insertions, 61 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index 5fac246a9530..3509707f9320 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -14,6 +14,9 @@ Required nodes: - core-module: the root node to the Integrator platforms must have a core-module with regs and the compatible string "arm,core-module-integrator" +- external-bus-interface: the root node to the Integrator platforms + must have an external bus interface with regs and the + compatible-string "arm,external-bus-interface" Required properties for the core module: - regs: the location and size of the core module registers, one @@ -48,6 +51,11 @@ Required nodes: reg = <0x10000000 0x200>; }; + ebi@12000000 { + compatible = "arm,external-bus-interface"; + reg = <0x12000000 0x100>; + }; + syscon { compatible = "arm,integrator-ap-syscon"; reg = <0x11000000 0x100>; diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt b/Documentation/devicetree/bindings/arm/atmel-aic.txt index ad031211b5b8..2742e9cfd6b1 100644 --- a/Documentation/devicetree/bindings/arm/atmel-aic.txt +++ b/Documentation/devicetree/bindings/arm/atmel-aic.txt @@ -2,6 +2,7 @@ Required properties: - compatible: Should be "atmel,<chip>-aic" + <chip> can be "at91rm9200" or "sama5d3" - interrupt-controller: Identifies the node as an interrupt controller. - interrupt-parent: For single AIC system, it is an empty property. - #interrupt-cells: The number of cells to define the interrupts. It should be 3. diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index 1196290082d1..16f60b41c147 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -20,6 +20,10 @@ TC/TCLIB Timer required properties: - interrupts: Should contain all interrupts for the TC block Note that you can specify several interrupt cells if the TC block has one interrupt per channel. +- clock-names: tuple listing input clock names. + Required elements: "t0_clk" + Optional elements: "t1_clk", "t2_clk" +- clocks: phandles to input clocks. Examples: @@ -28,6 +32,8 @@ One interrupt per TC block: compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; interrupts = <18 4>; + clocks = <&tcb0_clk>; + clock-names = "t0_clk"; }; One interrupt per TC channel in a TC block: @@ -35,6 +41,8 @@ One interrupt per TC channel in a TC block: compatible = "atmel,at91rm9200-tcb"; reg = <0xfffdc000 0x100>; interrupts = <26 4 27 4 28 4>; + clocks = <&tcb1_clk>; + clock-names = "t0_clk"; }; RSTC Reset Controller required properties: @@ -50,7 +58,8 @@ Example: }; RAMC SDRAM/DDR Controller required properties: -- compatible: Should be "atmel,at91sam9260-sdramc", +- compatible: Should be "atmel,at91rm9200-sdramc", + "atmel,at91sam9260-sdramc", "atmel,at91sam9g45-ddramc", - reg: Should contain registers location and length For at91sam9263 and at91sam9g45 you must specify 2 entries. diff --git a/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt b/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt index 17d88b233d1b..39adf54b4388 100644 --- a/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt +++ b/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt @@ -8,13 +8,18 @@ Required properties: - DEPRECATED: compatible : "bcm,kona-timer" - reg : Register range for the timer - interrupts : interrupt for the timer +- clocks: phandle + clock specifier pair of the external clock - clock-frequency: frequency that the clock operates +Only one of clocks or clock-frequency should be specified. + +Refer to clocks/clock-bindings.txt for generic clock consumer properties. + Example: timer@35006000 { compatible = "brcm,kona-timer"; reg = <0x35006000 0x1000>; interrupts = <0x0 7 0x4>; - clock-frequency = <32768>; + clocks = <&hub_timer_clk>; }; diff --git a/Documentation/devicetree/bindings/arm/davinci/nand.txt b/Documentation/devicetree/bindings/arm/davinci/nand.txt deleted file mode 100644 index 3545ea704b50..000000000000 --- a/Documentation/devicetree/bindings/arm/davinci/nand.txt +++ /dev/null @@ -1,46 +0,0 @@ -* Texas Instruments Davinci NAND - -This file provides information, what the device node for the -davinci nand interface contain. - -Required properties: -- compatible: "ti,davinci-nand"; -- reg : contain 2 offset/length values: - - offset and length for the access window - - offset and length for accessing the aemif control registers -- ti,davinci-chipselect: Indicates on the davinci_nand driver which - chipselect is used for accessing the nand. - -Recommended properties : -- ti,davinci-mask-ale: mask for ale -- ti,davinci-mask-cle: mask for cle -- ti,davinci-mask-chipsel: mask for chipselect -- ti,davinci-ecc-mode: ECC mode valid values for davinci driver: - - "none" - - "soft" - - "hw" -- ti,davinci-ecc-bits: used ECC bits, currently supported 1 or 4. -- ti,davinci-nand-buswidth: buswidth 8 or 16 -- ti,davinci-nand-use-bbt: use flash based bad block table support. - -nand device bindings may contain additional sub-nodes describing -partitions of the address space. See partition.txt for more detail. - -Example(da850 EVM ): -nand_cs3@62000000 { - compatible = "ti,davinci-nand"; - reg = <0x62000000 0x807ff - 0x68000000 0x8000>; - ti,davinci-chipselect = <1>; - ti,davinci-mask-ale = <0>; - ti,davinci-mask-cle = <0>; - ti,davinci-mask-chipsel = <0>; - ti,davinci-ecc-mode = "hw"; - ti,davinci-ecc-bits = <4>; - ti,davinci-nand-use-bbt; - - partition@180000 { - label = "ubifs"; - reg = <0x180000 0x7e80000>; - }; -}; diff --git a/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt new file mode 100644 index 000000000000..780d0392a66b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt @@ -0,0 +1,20 @@ +Trusted Foundations +------------------- + +Boards that use the Trusted Foundations secure monitor can signal its +presence by declaring a node compatible with "tlm,trusted-foundations" +under the /firmware/ node + +Required properties: +- compatible: "tlm,trusted-foundations" +- tlm,version-major: major version number of Trusted Foundations firmware +- tlm,version-minor: minor version number of Trusted Foundations firmware + +Example: + firmware { + trusted-foundations { + compatible = "tlm,trusted-foundations"; + tlm,version-major = <2>; + tlm,version-minor = <8>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt index 3dfb0c0384f5..bae0d87a38b2 100644 --- a/Documentation/devicetree/bindings/arm/gic.txt +++ b/Documentation/devicetree/bindings/arm/gic.txt @@ -11,6 +11,7 @@ have PPIs or SGIs. Main node required properties: - compatible : should be one of: + "arm,gic-400" "arm,cortex-a15-gic" "arm,cortex-a9-gic" "arm,cortex-a7-gic" diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt new file mode 100644 index 000000000000..8c7a4653508d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -0,0 +1,32 @@ +Hisilicon Platforms Device Tree Bindings +---------------------------------------------------- + +Hi4511 Board +Required root node properties: + - compatible = "hisilicon,hi3620-hi4511"; + +Hisilicon system controller + +Required properties: +- compatible : "hisilicon,sysctrl" +- reg : Register address and size + +Optional properties: +- smp-offset : offset in sysctrl for notifying slave cpu booting + cpu 1, reg; + cpu 2, reg + 0x4; + cpu 3, reg + 0x8; + If reg value is not zero, cpun exit wfi and go +- resume-offset : offset in sysctrl for notifying cpu0 when resume +- reboot-offset : offset in sysctrl for system reboot + +Example: + + /* for Hi3620 */ + sysctrl: system-controller@fc802000 { + compatible = "hisilicon,sysctrl"; + reg = <0xfc802000 0x1000>; + smp-offset = <0x31c>; + resume-offset = <0x308>; + reboot-offset = <0x4>; + }; diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt index c0c7626fd0ff..b513cb8196fe 100644 --- a/Documentation/devicetree/bindings/arm/l2cc.txt +++ b/Documentation/devicetree/bindings/arm/l2cc.txt @@ -7,20 +7,21 @@ The ARM L2 cache representation in the device tree should be done as follows: Required properties: - compatible : should be one of: - "arm,pl310-cache" - "arm,l220-cache" - "arm,l210-cache" - "marvell,aurora-system-cache": Marvell Controller designed to be + "arm,pl310-cache" + "arm,l220-cache" + "arm,l210-cache" + "bcm,bcm11351-a2-pl310-cache": DEPRECATED by "brcm,bcm11351-a2-pl310-cache" + "brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an + offset needs to be added to the address before passing down to the L2 + cache controller + "marvell,aurora-system-cache": Marvell Controller designed to be compatible with the ARM one, with system cache mode (meaning maintenance operations on L1 are broadcasted to the L2 and L2 performs the same operation). - "marvell,"aurora-outer-cache: Marvell Controller designed to be - compatible with the ARM one with outer cache mode. - "brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an - offset needs to be added to the address before passing down to the L2 - cache controller - "bcm,bcm11351-a2-pl310-cache": DEPRECATED by - "brcm,bcm11351-a2-pl310-cache" + "marvell,aurora-outer-cache": Marvell Controller designed to be + compatible with the ARM one with outer cache mode. + "marvell,tauros3-cache": Marvell Tauros3 cache controller, compatible + with arm,pl310-cache controller. - cache-unified : Specifies the cache is a unified cache. - cache-level : Should be set to 2 for a level 2 cache. - reg : Physical base address and size of cache controller's memory mapped diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt new file mode 100644 index 000000000000..737afa5f8148 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt @@ -0,0 +1,24 @@ +Marvell Berlin SoC Family Device Tree Bindings +--------------------------------------------------------------- + +Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500 +shall have the following properties: + +* Required root node properties: +compatible: must contain "marvell,berlin" + +In addition, the above compatible shall be extended with the specific +SoC and board used. Currently known SoC compatibles are: + "marvell,berlin2" for Marvell Armada 1500 (BG2, 88DE3100), + "marvell,berlin2cd" for Marvell Armada 1500-mini (BG2CD, 88DE3005) + "marvell,berlin2ct" for Marvell Armada ? (BG2CT, 88DE????) + "marvell,berlin3" for Marvell Armada ? (BG3, 88DE????) + +* Example: + +/ { + model = "Sony NSZ-GS7"; + compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin"; + + ... +} diff --git a/Documentation/devicetree/bindings/arm/moxart.txt b/Documentation/devicetree/bindings/arm/moxart.txt new file mode 100644 index 000000000000..11087edb0658 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/moxart.txt @@ -0,0 +1,12 @@ +MOXA ART device tree bindings + +Boards with the MOXA ART SoC shall have the following properties: + +Required root node property: + +compatible = "moxa,moxart"; + +Boards: + +- UC-7112-LX: embedded computer + compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart" diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 808c1543b0f8..af9b4a0d902b 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -31,6 +31,59 @@ spinlock@1 { ti,hwmods = "spinlock"; }; +SoC Type (optional): + +- General Purpose devices + compatible = "ti,gp" +- High Security devices + compatible = "ti,hs" + +SoC Families: + +- OMAP2 generic - defaults to OMAP2420 + compatible = "ti,omap2" +- OMAP3 generic - defaults to OMAP3430 + compatible = "ti,omap3" +- OMAP4 generic - defaults to OMAP4430 + compatible = "ti,omap4" +- OMAP5 generic - defaults to OMAP5430 + compatible = "ti,omap5" +- DRA7 generic - defaults to DRA742 + compatible = "ti,dra7" +- AM43x generic - defaults to AM4372 + compatible = "ti,am43" + +SoCs: + +- OMAP2420 + compatible = "ti,omap2420", "ti,omap2" +- OMAP2430 + compatible = "ti,omap2430", "ti,omap2" + +- OMAP3430 + compatible = "ti,omap3430", "ti,omap3" +- AM3517 + compatible = "ti,am3517", "ti,omap3" +- OMAP3630 + compatible = "ti,omap36xx", "ti,omap3" +- AM33xx + compatible = "ti,am33xx", "ti,omap3" + +- OMAP4430 + compatible = "ti,omap4430", "ti,omap4" +- OMAP4460 + compatible = "ti,omap4460", "ti,omap4" + +- OMAP5430 + compatible = "ti,omap5430", "ti,omap5" +- OMAP5432 + compatible = "ti,omap5432", "ti,omap5" + +- DRA742 + compatible = "ti,dra7xx", "ti,dra7" + +- AM4372 + compatible = "ti,am4372", "ti,am43" Boards: @@ -38,7 +91,7 @@ Boards: compatible = "ti,omap3-beagle", "ti,omap3" - OMAP3 Tobi with Overo : Commercial expansion board with daughter board - compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3" + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3" - OMAP4 SDP : Software Development Board compatible = "ti,omap4-sdp", "ti,omap4430" diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt index 5039c0a12f55..0ab3251a6ec2 100644 --- a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt +++ b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt @@ -1,7 +1,12 @@ SAMSUNG S5P/Exynos SoC series System Registers (SYSREG) Properties: - - name : should be 'sysreg'; - compatible : should contain "samsung,<chip name>-sysreg", "syscon"; For Exynos4 SoC series it should be "samsung,exynos4-sysreg", "syscon"; - reg : offset and length of the register set. + +Example: + syscon@10010000 { + compatible = "samsung,exynos4-sysreg", "syscon"; + reg = <0x10010000 0x400>; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt index ed9c85334436..558ed4b4ef39 100644 --- a/Documentation/devicetree/bindings/arm/tegra.txt +++ b/Documentation/devicetree/bindings/arm/tegra.txt @@ -32,3 +32,8 @@ board-specific compatible values: nvidia,whistler toradex,colibri_t20-512 toradex,iris + +Trusted Foundations +------------------------------------------- +Tegra supports the Trusted Foundation secure monitor. See the +"tlm,trusted-foundations" binding's documentation for more details. diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt index 1608a54e90e1..68ac65f82a1c 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt @@ -9,6 +9,7 @@ Required properties: - compatible : Should contain "nvidia,tegra<chip>-pmc". - reg : Offset and length of the register set for the device - clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entries: "pclk" (The Tegra clock of that name), "clk32k_in" (The 32KHz clock input to Tegra). diff --git a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt index 9989eda755d9..c9cf605bb995 100644 --- a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt +++ b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt @@ -29,3 +29,8 @@ pic: pic@14000000 { clear-mask = <0xffffffff>; valid-mask = <0x003fffff>; }; + +Optional properties: +- interrupts: if the FPGA IRQ controller is cascaded, i.e. if its IRQ + output is simply connected to the input of another IRQ controller, + then the parent IRQ shall be specified in this property. |